Display numeric units in the variables pane (#6683)

Signed-off-by: Nick Cameron <nrc@ncameron.org>

.codespellrc

@@ -1,3 +1,3 @@
 [codespell]
 ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser,fromM,FromM
-skip: **/target,node_modules,build,dist,./out,**/Cargo.lock,./docs/kcl/*.md,./e2e/playwright/lib/console-error-whitelist.ts,.package-lock.json,**/package-lock.json,./openapi/*.json,./packages/codemirror-lang-kcl/test/all.test.ts,./public/kcl-samples,./rust/kcl-lib/tests/kcl_samples,tsconfig.tsbuildinfo,./src/lib/machine-api.d.ts
+skip: **/target,node_modules,build,dist,./out,**/Cargo.lock,./docs/**/*.md,./e2e/playwright/lib/console-error-whitelist.ts,.package-lock.json,**/package-lock.json,./openapi/*.json,./packages/codemirror-lang-kcl/test/all.test.ts,./public/kcl-samples,./rust/kcl-lib/tests/kcl_samples,tsconfig.tsbuildinfo,./src/lib/machine-api.d.ts

.github/workflows/cargo-test.yml

@@ -84,7 +84,7 @@ jobs:
         run: |
           set -euo pipefail
           cd rust
-          cargo nextest run --workspace --features artifact-graph --retries=2 --no-fail-fast --profile ci simulation_tests::kcl_samples 2>&1 | tee /tmp/github-actions.log
+          cargo nextest run --workspace --features artifact-graph --retries=10 --no-fail-fast --profile ci simulation_tests::kcl_samples 2>&1 | tee /tmp/github-actions.log
         env:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN_DEV}}
           ZOO_HOST: https://api.dev.zoo.dev
@@ -180,7 +180,7 @@ jobs:
           ls -lah
           cd rust
           cargo nextest run\
-           --retries=2 --no-fail-fast -P ci --archive-file nextest-archive.tar.zst \
+           --retries=10 --no-fail-fast --profile ci --archive-file nextest-archive.tar.zst \
            --partition count:${{ matrix.partitionIndex}}/${{ matrix.partitionTotal }} \
            2>&1 | tee /tmp/github-actions.log
         env:

.github/workflows/generate-website-docs.yml

@@ -38,17 +38,13 @@ jobs:
         run: |
           mkdir -p documentation/content/pages/docs/kcl/
           # cleanup old
-          rm -rf documentation/content/pages/docs/kcl/*.md
-          rm -rf documentation/content/pages/docs/kcl/types
-          rm -rf documentation/content/pages/docs/kcl/functions
-          rm -rf documentation/content/pages/docs/kcl/consts
+          rm -rf documentation/content/pages/docs/kcl-std
+          rm -rf documentation/content/pages/docs/kcl-lang
           # move new
-          mv -f docs/kcl/*.md documentation/content/pages/docs/kcl/
-          mv -f docs/kcl/types documentation/content/pages/docs/kcl/
-          mv -f docs/kcl/functions documentation/content/pages/docs/kcl/
-          mv -f docs/kcl/consts documentation/content/pages/docs/kcl/
+          mv -f docs/kcl-std documentation/content/pages/docs
+          mv -f docs/kcl-lang documentation/content/pages/docs
           # We don't need the README
-          rm documentation/content/pages/docs/kcl/README.md
+          rm documentation/content/pages/docs/kcl-std/README.md
       - name: move kcl-samples
         shell: bash
         run: |

CONTRIBUTING.md

@@ -97,7 +97,7 @@ The following will need to be run when checking out a new commit and guarantees
 ```bash
 npm install
 npm run build:wasm
-npm start # or npm run build:local && npm run serve for slower but more production-like build
+npm start
 ```
 
 ## Before submitting a PR

Makefile

@@ -49,14 +49,9 @@ REACT_SOURCES := $(wildcard src/*.tsx) $(wildcard src/**/*.tsx)
 TYPESCRIPT_SOURCES := tsconfig.* $(wildcard src/*.ts) $(wildcard src/**/*.ts)
 VITE_SOURCES := $(wildcard vite.*) $(wildcard vite/**/*.tsx)
 
+
 .PHONY: build
-build: build-web build-desktop
-
-.PHONY: build-web
-build-web: install public/kcl_wasm_lib_bg.wasm build/index.html
-
-.PHONY: build-desktop
-build-desktop: install public/kcl_wasm_lib_bg.wasm .vite/build/main.js
+build: install public/kcl_wasm_lib_bg.wasm .vite/build/main.js
 
 public/kcl_wasm_lib_bg.wasm: $(CARGO_SOURCES) $(RUST_SOURCES)
 ifdef WINDOWS
@@ -65,9 +60,6 @@ else
 	npm run build:wasm:dev
 endif
 
-build/index.html: $(REACT_SOURCES) $(TYPESCRIPT_SOURCES) $(VITE_SOURCES)
-	npm run build:local
-
 .vite/build/main.js: $(REACT_SOURCES) $(TYPESCRIPT_SOURCES) $(VITE_SOURCES)
 	npm run tronb:vite:dev
 
@@ -95,11 +87,11 @@ TARGET ?= desktop
 run: run-$(TARGET)
 
 .PHONY: run-web
-run-web: install build-web ## Start the web app
+run-web: install build ## Start the web app
 	npm run start
 
 .PHONY: run-desktop
-run-desktop: install build-desktop ## Start the desktop app
+run-desktop: install build ## Start the desktop app
 	npm run tron:start
 
 ###############################################################################
@@ -121,7 +113,7 @@ test-unit: install ## Run the unit tests
 test-e2e: test-e2e-$(TARGET)
 
 .PHONY: test-e2e-web
-test-e2e-web: install build-web ## Run the web e2e tests
+test-e2e-web: install build ## Run the web e2e tests
 	@ curl -fs localhost:3000 >/dev/null || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
 ifdef E2E_GREP
 	npm run chrome:test -- --headed --grep="$(E2E_GREP)" --max-failures=$(E2E_FAILURES)
@@ -130,7 +122,7 @@ else
 endif
 
 .PHONY: test-e2e-desktop
-test-e2e-desktop: install build-desktop ## Run the desktop e2e tests
+test-e2e-desktop: install build ## Run the desktop e2e tests
 ifdef E2E_GREP
 	npm run test:playwright:electron -- --grep="$(E2E_GREP)" --max-failures=$(E2E_FAILURES)
 else

docs/kcl-lang/index.md

@@ -0,0 +1,12 @@
+---
+title: "KCL Language Guide"
+excerpt: "Documentation of the KCL language for the Zoo Design Studio."
+layout: manual
+---
+
+## Topics
+
+* [`Types`](/docs/kcl-lang/types)
+* [`Modules`](/docs/kcl-lang/modules)
+* [`Settings`](/docs/kcl-lang/settings)
+* [`Known Issues`](/docs/kcl-lang/known-issues)

docs/kcl-lang/types.md

@@ -210,7 +210,7 @@ As per the example above you can use the tag identifier to get a reference to th
 tagged object. The syntax for this is `myTag`.
 
 In the example above we use the tag identifier to get the angle of the segment
-`segAng(rectangleSegmentA001, %)`.
+`segAng(rectangleSegmentA001)`.
 
 ### `Start`
 

docs/kcl-std/angledLine.md

@@ -21,23 +21,22 @@ angledLine(
 ): Sketch
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
-| `angle` | [`number`](/docs/kcl/types/std-types-number) | Which angle should the line be drawn at? | Yes |
-| `length` | [`number`](/docs/kcl/types/std-types-number) | Draw the line this distance along the given angle. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
-| `lengthX` | [`number`](/docs/kcl/types/std-types-number) | Draw the line this distance along the X axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
-| `lengthY` | [`number`](/docs/kcl/types/std-types-number) | Draw the line this distance along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
-| `endAbsoluteX` | [`number`](/docs/kcl/types/std-types-number) | Draw the line along the given angle until it reaches this point along the X axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
-| `endAbsoluteY` | [`number`](/docs/kcl/types/std-types-number) | Draw the line along the given angle until it reaches this point along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | Create a new tag which refers to this line | No |
+| `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
+| `angle` | [`number`](/docs/kcl-std/types/std-types-number) | Which angle should the line be drawn at? | Yes |
+| `length` | [`number`](/docs/kcl-std/types/std-types-number) | Draw the line this distance along the given angle. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
+| `lengthX` | [`number`](/docs/kcl-std/types/std-types-number) | Draw the line this distance along the X axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
+| `lengthY` | [`number`](/docs/kcl-std/types/std-types-number) | Draw the line this distance along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
+| `endAbsoluteX` | [`number`](/docs/kcl-std/types/std-types-number) | Draw the line along the given angle until it reaches this point along the X axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
+| `endAbsoluteY` | [`number`](/docs/kcl-std/types/std-types-number) | Draw the line along the given angle until it reaches this point along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | Create a new tag which refers to this line | No |
 
 ### Returns
 
-[`Sketch`](/docs/kcl/types/std-types-Sketch)
+[`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/angledLineThatIntersects.md

@@ -18,20 +18,19 @@ angledLineThatIntersects(
 ): Sketch
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
-| `angle` | [`number`](/docs/kcl/types/std-types-number) | Which angle should the line be drawn at? | Yes |
-| `intersectTag` | [`TagIdentifier`](/docs/kcl/types#TagIdentifier) | The tag of the line to intersect with | Yes |
-| `offset` | [`number`](/docs/kcl/types/std-types-number) | The offset from the intersecting line. Defaults to 0. | No |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | Create a new tag which refers to this line | No |
+| `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
+| `angle` | [`number`](/docs/kcl-std/types/std-types-number) | Which angle should the line be drawn at? | Yes |
+| `intersectTag` | [`TagIdentifier`](/docs/kcl-lang/types#TagIdentifier) | The tag of the line to intersect with | Yes |
+| `offset` | [`number`](/docs/kcl-std/types/std-types-number) | The offset from the intersecting line. Defaults to 0. | No |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | Create a new tag which refers to this line | No |
 
 ### Returns
 
-[`Sketch`](/docs/kcl/types/std-types-Sketch)
+[`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/appearance.md

@@ -17,19 +17,18 @@ appearance(
 ): [Solid] | ImportedGeometry
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solids` | [`[Solid]`](/docs/kcl/types/std-types-Solid) or [`ImportedGeometry`](/docs/kcl/types#ImportedGeometry) | The solid(s) whose appearance is being set | Yes |
-| `color` | [`string`](/docs/kcl/types/std-types-string) | Color of the new material, a hex string like '#ff0000' | Yes |
-| `metalness` | [`number`](/docs/kcl/types/std-types-number) | Metalness of the new material, a percentage like 95.7. | No |
-| `roughness` | [`number`](/docs/kcl/types/std-types-number) | Roughness of the new material, a percentage like 95.7. | No |
+| `solids` | [`[Solid]`](/docs/kcl-std/types/std-types-Solid) or [`ImportedGeometry`](/docs/kcl-lang/types#ImportedGeometry) | The solid(s) whose appearance is being set | Yes |
+| `color` | [`string`](/docs/kcl-std/types/std-types-string) | Color of the new material, a hex string like '#ff0000' | Yes |
+| `metalness` | [`number`](/docs/kcl-std/types/std-types-number) | Metalness of the new material, a percentage like 95.7. | No |
+| `roughness` | [`number`](/docs/kcl-std/types/std-types-number) | Roughness of the new material, a percentage like 95.7. | No |
 
 ### Returns
 
-[`[Solid]`](/docs/kcl/types/std-types-Solid) or [`ImportedGeometry`](/docs/kcl/types#ImportedGeometry) - Data for a solid or an imported geometry.
+[`[Solid]`](/docs/kcl-std/types/std-types-Solid) or [`ImportedGeometry`](/docs/kcl-lang/types#ImportedGeometry) - Data for a solid or an imported geometry.
 
 
 ### Examples

docs/kcl-std/arc.md

@@ -22,22 +22,21 @@ arc(
 ): Sketch
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
-| `angleStart` | [`number`](/docs/kcl/types/std-types-number) | Where along the circle should this arc start? | No |
-| `angleEnd` | [`number`](/docs/kcl/types/std-types-number) | Where along the circle should this arc end? | No |
-| `radius` | [`number`](/docs/kcl/types/std-types-number) | How large should the circle be? | No |
-| `interiorAbsolute` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | Any point between the arc's start and end? Requires `endAbsolute`. Incompatible with `angleStart` or `angleEnd` | No |
-| `endAbsolute` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | Where should this arc end? Requires `interiorAbsolute`. Incompatible with `angleStart` or `angleEnd` | No |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | Create a new tag which refers to this line | No |
+| `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
+| `angleStart` | [`number`](/docs/kcl-std/types/std-types-number) | Where along the circle should this arc start? | No |
+| `angleEnd` | [`number`](/docs/kcl-std/types/std-types-number) | Where along the circle should this arc end? | No |
+| `radius` | [`number`](/docs/kcl-std/types/std-types-number) | How large should the circle be? | No |
+| `interiorAbsolute` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | Any point between the arc's start and end? Requires `endAbsolute`. Incompatible with `angleStart` or `angleEnd` | No |
+| `endAbsolute` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | Where should this arc end? Requires `interiorAbsolute`. Incompatible with `angleStart` or `angleEnd` | No |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | Create a new tag which refers to this line | No |
 
 ### Returns
 
-[`Sketch`](/docs/kcl/types/std-types-Sketch)
+[`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/assert.md

@@ -21,19 +21,18 @@ assert(
 ): ()
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `actual` | [`number`](/docs/kcl/types/std-types-number) | Value to check. It will be compared with one of the comparison arguments. | Yes |
-| `isGreaterThan` | [`number`](/docs/kcl/types/std-types-number) | Comparison argument. If given, checks the `actual` value is greater than this. | No |
-| `isLessThan` | [`number`](/docs/kcl/types/std-types-number) | Comparison argument. If given, checks the `actual` value is less than this. | No |
-| `isGreaterThanOrEqual` | [`number`](/docs/kcl/types/std-types-number) | Comparison argument. If given, checks the `actual` value is greater than or equal to this. | No |
-| `isLessThanOrEqual` | [`number`](/docs/kcl/types/std-types-number) | Comparison argument. If given, checks the `actual` value is less than or equal to this. | No |
-| `isEqualTo` | [`number`](/docs/kcl/types/std-types-number) | Comparison argument. If given, checks the `actual` value is less than or equal to this. | No |
-| `tolerance` | [`number`](/docs/kcl/types/std-types-number) | If `isEqualTo` is used, this is the tolerance to allow for the comparison. This tolerance is used because KCL's number system has some floating-point imprecision when used with very large decimal places. | No |
-| `error` | [`string`](/docs/kcl/types/std-types-string) | If the value was false, the program will terminate with this error message | No |
+| `actual` | [`number`](/docs/kcl-std/types/std-types-number) | Value to check. It will be compared with one of the comparison arguments. | Yes |
+| `isGreaterThan` | [`number`](/docs/kcl-std/types/std-types-number) | Comparison argument. If given, checks the `actual` value is greater than this. | No |
+| `isLessThan` | [`number`](/docs/kcl-std/types/std-types-number) | Comparison argument. If given, checks the `actual` value is less than this. | No |
+| `isGreaterThanOrEqual` | [`number`](/docs/kcl-std/types/std-types-number) | Comparison argument. If given, checks the `actual` value is greater than or equal to this. | No |
+| `isLessThanOrEqual` | [`number`](/docs/kcl-std/types/std-types-number) | Comparison argument. If given, checks the `actual` value is less than or equal to this. | No |
+| `isEqualTo` | [`number`](/docs/kcl-std/types/std-types-number) | Comparison argument. If given, checks the `actual` value is less than or equal to this. | No |
+| `tolerance` | [`number`](/docs/kcl-std/types/std-types-number) | If `isEqualTo` is used, this is the tolerance to allow for the comparison. This tolerance is used because KCL's number system has some floating-point imprecision when used with very large decimal places. | No |
+| `error` | [`string`](/docs/kcl-std/types/std-types-string) | If the value was false, the program will terminate with this error message | No |
 
 ### Returns
 

docs/kcl-std/assertIs.md

@@ -15,13 +15,12 @@ assertIs(
 ): ()
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `actual` | [`bool`](/docs/kcl/types/std-types-bool) | Value to check. If this is the boolean value true, assert passes. Otherwise it fails. | Yes |
-| `error` | [`string`](/docs/kcl/types/std-types-string) | If the value was false, the program will terminate with this error message | No |
+| `actual` | [`bool`](/docs/kcl-std/types/std-types-bool) | Value to check. If this is the boolean value true, assert passes. Otherwise it fails. | Yes |
+| `error` | [`string`](/docs/kcl-std/types/std-types-string) | If the value was false, the program will terminate with this error message | No |
 
 ### Returns
 

docs/kcl-std/bezierCurve.md

@@ -18,20 +18,19 @@ bezierCurve(
 ): Sketch
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
-| `control1` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | First control point for the cubic | Yes |
-| `control2` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | Second control point for the cubic | Yes |
-| `end` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | How far away (along the X and Y axes) should this line go? | Yes |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | Create a new tag which refers to this line | No |
+| `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
+| `control1` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | First control point for the cubic | Yes |
+| `control2` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | Second control point for the cubic | Yes |
+| `end` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | How far away (along the X and Y axes) should this line go? | Yes |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | Create a new tag which refers to this line | No |
 
 ### Returns
 
-[`Sketch`](/docs/kcl/types/std-types-Sketch)
+[`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/circleThreePoint.md

@@ -18,20 +18,19 @@ circleThreePoint(
 ): Sketch
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketchSurfaceOrGroup` | [`Sketch`](/docs/kcl/types/std-types-Sketch) or [`Plane`](/docs/kcl/types/std-types-Plane) or [`Face`](/docs/kcl/types/std-types-Face) | Plane or surface to sketch on. | Yes |
-| `p1` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | 1st point to derive the circle. | Yes |
-| `p2` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | 2nd point to derive the circle. | Yes |
-| `p3` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | 3rd point to derive the circle. | Yes |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | Identifier for the circle to reference elsewhere. | No |
+| `sketchSurfaceOrGroup` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) or [`Plane`](/docs/kcl-std/types/std-types-Plane) or [`Face`](/docs/kcl-std/types/std-types-Face) | Plane or surface to sketch on. | Yes |
+| `p1` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | 1st point to derive the circle. | Yes |
+| `p2` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | 2nd point to derive the circle. | Yes |
+| `p3` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | 3rd point to derive the circle. | Yes |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | Identifier for the circle to reference elsewhere. | No |
 
 ### Returns
 
-[`Sketch`](/docs/kcl/types/std-types-Sketch)
+[`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/clone.md

@@ -16,16 +16,15 @@ Really only use this function if YOU ARE SURE you need it. In most cases you do
 clone(geometry: Solid | Sketch | ImportedGeometry): Solid | Sketch | ImportedGeometry
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `geometry` | [`Solid`](/docs/kcl/types/std-types-Solid) or [`Sketch`](/docs/kcl/types/std-types-Sketch) or [`ImportedGeometry`](/docs/kcl/types#ImportedGeometry) | The sketch, solid, or imported geometry to be cloned | Yes |
+| `geometry` | [`Solid`](/docs/kcl-std/types/std-types-Solid) or [`Sketch`](/docs/kcl-std/types/std-types-Sketch) or [`ImportedGeometry`](/docs/kcl-lang/types#ImportedGeometry) | The sketch, solid, or imported geometry to be cloned | Yes |
 
 ### Returns
 
-[`Solid`](/docs/kcl/types/std-types-Solid) or [`Sketch`](/docs/kcl/types/std-types-Sketch) or [`ImportedGeometry`](/docs/kcl/types#ImportedGeometry) - A geometry including an imported geometry.
+[`Solid`](/docs/kcl-std/types/std-types-Solid) or [`Sketch`](/docs/kcl-std/types/std-types-Sketch) or [`ImportedGeometry`](/docs/kcl-lang/types#ImportedGeometry) - A geometry including an imported geometry.
 
 
 ### Examples

docs/kcl-std/close.md

@@ -15,17 +15,16 @@ close(
 ): Sketch
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/std-types-Sketch) | The sketch you want to close | Yes |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | Create a new tag which refers to this line | No |
+| `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | The sketch you want to close | Yes |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | Create a new tag which refers to this line | No |
 
 ### Returns
 
-[`Sketch`](/docs/kcl/types/std-types-Sketch)
+[`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/extrude.md

@@ -19,21 +19,20 @@ extrude(
 ): [Solid]
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketches` | [`[Sketch]`](/docs/kcl/types/std-types-Sketch) | Which sketch or sketches should be extruded | Yes |
-| `length` | [`number`](/docs/kcl/types/std-types-number) | How far to extrude the given sketches | Yes |
-| `symmetric` | [`bool`](/docs/kcl/types/std-types-bool) | If true, the extrusion will happen symmetrically around the sketch. Otherwise, the | No |
-| `bidirectionalLength` | [`number`](/docs/kcl/types/std-types-number) | If specified, will also extrude in the opposite direction to 'distance' to the specified distance. If 'symmetric' is true, this value is ignored. | No |
-| `tagStart` | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | A named tag for the face at the start of the extrusion, i.e. the original sketch | No |
-| `tagEnd` | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | A named tag for the face at the end of the extrusion, i.e. the new face created by extruding the original sketch | No |
+| `sketches` | [`[Sketch]`](/docs/kcl-std/types/std-types-Sketch) | Which sketch or sketches should be extruded | Yes |
+| `length` | [`number`](/docs/kcl-std/types/std-types-number) | How far to extrude the given sketches | Yes |
+| `symmetric` | [`bool`](/docs/kcl-std/types/std-types-bool) | If true, the extrusion will happen symmetrically around the sketch. Otherwise, the | No |
+| `bidirectionalLength` | [`number`](/docs/kcl-std/types/std-types-number) | If specified, will also extrude in the opposite direction to 'distance' to the specified distance. If 'symmetric' is true, this value is ignored. | No |
+| `tagStart` | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | A named tag for the face at the start of the extrusion, i.e. the original sketch | No |
+| `tagEnd` | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | A named tag for the face at the end of the extrusion, i.e. the new face created by extruding the original sketch | No |
 
 ### Returns
 
-[`[Solid]`](/docs/kcl/types/std-types-Solid)
+[`[Solid]`](/docs/kcl-std/types/std-types-Solid)
 
 
 ### Examples

docs/kcl-std/functions/std-helix.md

@@ -20,22 +20,21 @@ helix(
 ): Helix
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `revolutions` | `number(_)` | Number of revolutions. | Yes |
 | `angleStart` | `number(Angle)` | Start angle. | Yes |
-| `ccw` | [`bool`](/docs/kcl/types/std-types-bool) | Is the helix rotation counter clockwise? The default is `false`. | No |
+| `ccw` | [`bool`](/docs/kcl-std/types/std-types-bool) | Is the helix rotation counter clockwise? The default is `false`. | No |
 | `radius` | `number(Length)` | Radius of the helix. | No |
-| `axis` | [`Axis3d`](/docs/kcl/types/std-types-Axis3d) or [`Edge`](/docs/kcl/types/std-types-Edge) | Axis to use for the helix. | No |
+| `axis` | [`Axis3d`](/docs/kcl-std/types/std-types-Axis3d) or [`Edge`](/docs/kcl-std/types/std-types-Edge) | Axis to use for the helix. | No |
 | `length` | `number(Length)` | Length of the helix. This is not necessary if the helix is created around an edge. If not given the length of the edge is used. | No |
-| `cylinder` | [`Solid`](/docs/kcl/types/std-types-Solid) | Cylinder to create the helix on. | No |
+| `cylinder` | [`Solid`](/docs/kcl-std/types/std-types-Solid) | Cylinder to create the helix on. | No |
 
 ### Returns
 
-[`Helix`](/docs/kcl/types/std-types-Helix)
+[`Helix`](/docs/kcl-std/types/std-types-Helix)
 
 
 ### Examples

docs/kcl-std/functions/std-math-abs.md

@@ -12,16 +12,15 @@ Compute the absolute value of a number.
 abs(@input: number): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`number`](/docs/kcl/types/std-types-number) |  | Yes |
+| `input` | [`number`](/docs/kcl-std/types/std-types-number) |  | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-acos.md

@@ -12,7 +12,6 @@ Compute the arccosine of a number.
 acos(@num: number(_)): number(rad)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-math-asin.md

@@ -12,7 +12,6 @@ Compute the arcsine of a number.
 asin(@num: number(_)): number(rad)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-math-atan.md

@@ -12,7 +12,6 @@ Consider using `atan2()` instead for the true inverse of tangent.
 atan(@num: number(_)): number(rad)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-math-atan2.md

@@ -15,7 +15,6 @@ atan2(
 ): number(rad)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-math-ceil.md

@@ -12,16 +12,15 @@ Compute the smallest integer greater than or equal to a number.
 ceil(@input: number): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`number`](/docs/kcl/types/std-types-number) |  | Yes |
+| `input` | [`number`](/docs/kcl-std/types/std-types-number) |  | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-cos.md

@@ -12,7 +12,6 @@ Compute the cosine of a number.
 cos(@num: number(Angle)): number(_)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-math-floor.md

@@ -12,16 +12,15 @@ Compute the largest integer less than or equal to a number.
 floor(@input: number): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`number`](/docs/kcl/types/std-types-number) |  | Yes |
+| `input` | [`number`](/docs/kcl-std/types/std-types-number) |  | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-ln.md

@@ -12,16 +12,15 @@ Compute the natural logarithm of the number.
 ln(@input: number): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`number`](/docs/kcl/types/std-types-number) |  | Yes |
+| `input` | [`number`](/docs/kcl-std/types/std-types-number) |  | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-log.md

@@ -17,17 +17,16 @@ log(
 ): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`number`](/docs/kcl/types/std-types-number) | The number to compute the logarithm of. | Yes |
+| `input` | [`number`](/docs/kcl-std/types/std-types-number) | The number to compute the logarithm of. | Yes |
 | `base` | `number(_)` | The base of the logarithm. | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-log10.md

@@ -12,16 +12,15 @@ Compute the base 10 logarithm of the number.
 log10(@input: number): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`number`](/docs/kcl/types/std-types-number) |  | Yes |
+| `input` | [`number`](/docs/kcl-std/types/std-types-number) |  | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-log2.md

@@ -12,16 +12,15 @@ Compute the base 2 logarithm of the number.
 log2(@input: number): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`number`](/docs/kcl/types/std-types-number) |  | Yes |
+| `input` | [`number`](/docs/kcl-std/types/std-types-number) |  | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-max.md

@@ -12,16 +12,15 @@ Compute the maximum of the given arguments.
 max(@input: [number; 1+]): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`[number; 1+]`](/docs/kcl/types/std-types-number) | An array of numbers to compute the maximum of. | Yes |
+| `input` | [`[number; 1+]`](/docs/kcl-std/types/std-types-number) | An array of numbers to compute the maximum of. | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-min.md

@@ -12,16 +12,15 @@ Compute the minimum of the given arguments.
 min(@input: [number; 1+]): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`[number; 1+]`](/docs/kcl/types/std-types-number) | An array of numbers to compute the minimum of. | Yes |
+| `input` | [`[number; 1+]`](/docs/kcl-std/types/std-types-number) | An array of numbers to compute the minimum of. | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-polar.md

@@ -16,7 +16,6 @@ polar(
 ): Point2d
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
@@ -26,7 +25,7 @@ polar(
 
 ### Returns
 
-[`Point2d`](/docs/kcl/types/std-types-Point2d)
+[`Point2d`](/docs/kcl-std/types/std-types-Point2d)
 
 
 ### Examples

docs/kcl-std/functions/std-math-pow.md

@@ -15,17 +15,16 @@ pow(
 ): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`number`](/docs/kcl/types/std-types-number) | The number to raise. | Yes |
+| `input` | [`number`](/docs/kcl-std/types/std-types-number) | The number to raise. | Yes |
 | `exp` | `number(_)` | The power to raise to. | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-rem.md

@@ -16,17 +16,16 @@ rem(
 ): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `num` | [`number`](/docs/kcl/types/std-types-number) | The number which will be divided by `divisor`. | Yes |
-| `divisor` | [`number`](/docs/kcl/types/std-types-number) | The number which will divide `num`. | Yes |
+| `num` | [`number`](/docs/kcl-std/types/std-types-number) | The number which will be divided by `divisor`. | Yes |
+| `divisor` | [`number`](/docs/kcl-std/types/std-types-number) | The number which will divide `num`. | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-round.md

@@ -12,16 +12,15 @@ Round a number to the nearest integer.
 round(@input: number): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`number`](/docs/kcl/types/std-types-number) |  | Yes |
+| `input` | [`number`](/docs/kcl-std/types/std-types-number) |  | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-sin.md

@@ -12,7 +12,6 @@ Compute the sine of a number.
 sin(@num: number(Angle)): number(_)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-math-sqrt.md

@@ -12,16 +12,15 @@ Compute the square root of a number.
 sqrt(@input: number): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `input` | [`number`](/docs/kcl/types/std-types-number) |  | Yes |
+| `input` | [`number`](/docs/kcl-std/types/std-types-number) |  | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/functions/std-math-tan.md

@@ -12,7 +12,6 @@ Compute the tangent of a number.
 tan(@num: number(Angle)): number(_)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-offsetPlane.md

@@ -16,17 +16,16 @@ offsetPlane(
 ): Plane
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `plane` | [`Plane`](/docs/kcl/types/std-types-Plane) | The plane (e.g. `XY`) which this new plane is created from. | Yes |
+| `plane` | [`Plane`](/docs/kcl-std/types/std-types-Plane) | The plane (e.g. `XY`) which this new plane is created from. | Yes |
 | `offset` | `number(Length)` | Distance from the standard plane this new plane will be created at. | Yes |
 
 ### Returns
 
-[`Plane`](/docs/kcl/types/std-types-Plane)
+[`Plane`](/docs/kcl-std/types/std-types-Plane)
 
 
 ### Examples

docs/kcl-std/functions/std-revolve.md

@@ -30,23 +30,22 @@ revolve(
 ): Solid
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketches` | [`[Sketch; 1+]`](/docs/kcl/types/std-types-Sketch) | The sketch or set of sketches that should be revolved | Yes |
-| `axis` | [`Axis2d`](/docs/kcl/types/std-types-Axis2d) or [`Edge`](/docs/kcl/types/std-types-Edge) | Axis of revolution. | Yes |
+| `sketches` | [`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch) | The sketch or set of sketches that should be revolved | Yes |
+| `axis` | [`Axis2d`](/docs/kcl-std/types/std-types-Axis2d) or [`Edge`](/docs/kcl-std/types/std-types-Edge) | Axis of revolution. | Yes |
 | `angle` | `number(Angle)` | Angle to revolve (in degrees). Default is 360. | No |
 | `tolerance` | `number(Length)` | Tolerance for the revolve operation. | No |
-| `symmetric` | [`bool`](/docs/kcl/types/std-types-bool) | If true, the extrusion will happen symmetrically around the sketch. Otherwise, the extrusion will happen on only one side of the sketch. | No |
+| `symmetric` | [`bool`](/docs/kcl-std/types/std-types-bool) | If true, the extrusion will happen symmetrically around the sketch. Otherwise, the extrusion will happen on only one side of the sketch. | No |
 | `bidirectionalAngle` | `number(Angle)` | If specified, will also revolve in the opposite direction to 'angle' to the specified angle. If 'symmetric' is true, this value is ignored. | No |
-| `tagStart` | [`tag`](/docs/kcl/types/std-types-tag) | A named tag for the face at the start of the revolve, i.e. the original sketch. | No |
-| `tagEnd` | [`tag`](/docs/kcl/types/std-types-tag) | A named tag for the face at the end of the revolve. | No |
+| `tagStart` | [`tag`](/docs/kcl-std/types/std-types-tag) | A named tag for the face at the start of the revolve, i.e. the original sketch. | No |
+| `tagEnd` | [`tag`](/docs/kcl-std/types/std-types-tag) | A named tag for the face at the end of the revolve. | No |
 
 ### Returns
 
-[`Solid`](/docs/kcl/types/std-types-Solid)
+[`Solid`](/docs/kcl-std/types/std-types-Solid)
 
 
 ### Examples

docs/kcl-std/functions/std-sketch-circle.md

@@ -18,19 +18,18 @@ circle(
 ): Sketch
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_or_surface` | [`Sketch`](/docs/kcl/types/std-types-Sketch) or [`Plane`](/docs/kcl/types/std-types-Plane) or [`Face`](/docs/kcl/types/std-types-Face) | Sketch to extend, or plane or surface to sketch on. | Yes |
-| `center` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | The center of the circle. | Yes |
+| `sketch_or_surface` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) or [`Plane`](/docs/kcl-std/types/std-types-Plane) or [`Face`](/docs/kcl-std/types/std-types-Face) | Sketch to extend, or plane or surface to sketch on. | Yes |
+| `center` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | The center of the circle. | Yes |
 | `radius` | `number(Length)` | The radius of the circle. | Yes |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`tag`](/docs/kcl/types/std-types-tag) | Create a new tag which refers to this circle. | No |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this circle. | No |
 
 ### Returns
 
-[`Sketch`](/docs/kcl/types/std-types-Sketch)
+[`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/functions/std-sketch-mirror2d.md

@@ -17,17 +17,16 @@ mirror2d(
 ): Sketch
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketches` | [`[Sketch; 1+]`](/docs/kcl/types/std-types-Sketch) | The sketch or sketches to be reflected. | Yes |
-| `axis` | [`Axis2d`](/docs/kcl/types/std-types-Axis2d) or [`Edge`](/docs/kcl/types/std-types-Edge) | The axis to reflect around. | Yes |
+| `sketches` | [`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch) | The sketch or sketches to be reflected. | Yes |
+| `axis` | [`Axis2d`](/docs/kcl-std/types/std-types-Axis2d) or [`Edge`](/docs/kcl-std/types/std-types-Edge) | The axis to reflect around. | Yes |
 
 ### Returns
 
-[`Sketch`](/docs/kcl/types/std-types-Sketch)
+[`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/functions/std-solid-chamfer.md

@@ -19,19 +19,18 @@ chamfer(
 ): Solid
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid` | [`Solid`](/docs/kcl/types/std-types-Solid) | The solid whose edges should be chamfered | Yes |
+| `solid` | [`Solid`](/docs/kcl-std/types/std-types-Solid) | The solid whose edges should be chamfered | Yes |
 | `length` | `number(Length)` | The length of the chamfer | Yes |
-| `tags` | [`[Edge; 1+]`](/docs/kcl/types/std-types-Edge) | The paths you want to chamfer | Yes |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`tag`](/docs/kcl/types/std-types-tag) | Create a new tag which refers to this chamfer | No |
+| `tags` | [`[Edge; 1+]`](/docs/kcl-std/types/std-types-Edge) | The paths you want to chamfer | Yes |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this chamfer | No |
 
 ### Returns
 
-[`Solid`](/docs/kcl/types/std-types-Solid)
+[`Solid`](/docs/kcl-std/types/std-types-Solid)
 
 
 ### Examples

docs/kcl-std/functions/std-solid-fillet.md

@@ -20,20 +20,19 @@ fillet(
 ): Solid
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid` | [`Solid`](/docs/kcl/types/std-types-Solid) | The solid whose edges should be filletted | Yes |
+| `solid` | [`Solid`](/docs/kcl-std/types/std-types-Solid) | The solid whose edges should be filletted | Yes |
 | `radius` | `number(Length)` | The radius of the fillet | Yes |
-| `tags` | [`[Edge; 1+]`](/docs/kcl/types/std-types-Edge) | The paths you want to fillet | Yes |
+| `tags` | [`[Edge; 1+]`](/docs/kcl-std/types/std-types-Edge) | The paths you want to fillet | Yes |
 | `tolerance` | `number(Length)` | The tolerance for this fillet | No |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`tag`](/docs/kcl/types/std-types-tag) | Create a new tag which refers to this fillet | No |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this fillet | No |
 
 ### Returns
 
-[`Solid`](/docs/kcl/types/std-types-Solid)
+[`Solid`](/docs/kcl-std/types/std-types-Solid)
 
 
 ### Examples

docs/kcl-std/functions/std-solid-hollow.md

@@ -16,17 +16,16 @@ hollow(
 ): Solid
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid` | [`Solid`](/docs/kcl/types/std-types-Solid) | Which solid to hollow out | Yes |
+| `solid` | [`Solid`](/docs/kcl-std/types/std-types-Solid) | Which solid to hollow out | Yes |
 | `thickness` | `number(Length)` | The thickness of the remaining shell | Yes |
 
 ### Returns
 
-[`Solid`](/docs/kcl/types/std-types-Solid)
+[`Solid`](/docs/kcl-std/types/std-types-Solid)
 
 
 ### Examples

docs/kcl-std/functions/std-solid-shell.md

@@ -17,18 +17,17 @@ shell(
 ): [Solid]
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solids` | [`[Solid; 1+]`](/docs/kcl/types/std-types-Solid) | Which solid (or solids) to shell out | Yes |
+| `solids` | [`[Solid; 1+]`](/docs/kcl-std/types/std-types-Solid) | Which solid (or solids) to shell out | Yes |
 | `thickness` | `number(Length)` | The thickness of the shell | Yes |
-| `faces` | [`[tag; 1+]`](/docs/kcl/types/std-types-tag) | The faces you want removed | Yes |
+| `faces` | [`[tag; 1+]`](/docs/kcl-std/types/std-types-tag) | The faces you want removed | Yes |
 
 ### Returns
 
-[`[Solid]`](/docs/kcl/types/std-types-Solid)
+[`[Solid]`](/docs/kcl-std/types/std-types-Solid)
 
 
 ### Examples

docs/kcl-std/functions/std-units-toCentimeters.md

@@ -12,7 +12,6 @@ Convert a number to centimeters from its current units.
 units::toCentimeters(@num: number(cm)): number(cm)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-units-toDegrees.md

@@ -12,7 +12,6 @@ Converts a number to degrees from its current units.
 units::toDegrees(@num: number(deg)): number(deg)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-units-toFeet.md

@@ -12,7 +12,6 @@ Convert a number to feet from its current units.
 units::toFeet(@num: number(ft)): number(ft)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-units-toInches.md

@@ -12,7 +12,6 @@ Convert a number to inches from its current units.
 units::toInches(@num: number(in)): number(in)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-units-toMeters.md

@@ -12,7 +12,6 @@ Convert a number to meters from its current units.
 units::toMeters(@num: number(m)): number(m)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-units-toMillimeters.md

@@ -12,7 +12,6 @@ Convert a number to millimeters from its current units.
 units::toMillimeters(@num: number(mm)): number(mm)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-units-toRadians.md

@@ -12,7 +12,6 @@ Converts a number to radians from its current units.
 units::toRadians(@num: number(rad)): number(rad)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/functions/std-units-toYards.md

@@ -12,7 +12,6 @@ Converts a number to yards from its current units.
 units::toYards(@num: number(yd)): number(yd)
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |

docs/kcl-std/getCommonEdge.md

@@ -12,12 +12,11 @@ Get the shared edge between two faces.
 getCommonEdge(faces: [TagIdentifier]): Uuid
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `faces` | [`[TagIdentifier]`](/docs/kcl/types#TagIdentifier) | The tags of the faces you want to find the common edge between | Yes |
+| `faces` | [`[TagIdentifier]`](/docs/kcl-lang/types#TagIdentifier) | The tags of the faces you want to find the common edge between | Yes |
 
 ### Returns
 

docs/kcl-std/getNextAdjacentEdge.md

@@ -12,12 +12,11 @@ Get the next adjacent edge to the edge given.
 getNextAdjacentEdge(edge: TagIdentifier): Uuid
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `edge` | [`TagIdentifier`](/docs/kcl/types#TagIdentifier) | The tag of the edge you want to find the next adjacent edge of. | Yes |
+| `edge` | [`TagIdentifier`](/docs/kcl-lang/types#TagIdentifier) | The tag of the edge you want to find the next adjacent edge of. | Yes |
 
 ### Returns
 

docs/kcl-std/getOppositeEdge.md

@@ -12,12 +12,11 @@ Get the opposite edge to the edge given.
 getOppositeEdge(edge: TagIdentifier): Uuid
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `edge` | [`TagIdentifier`](/docs/kcl/types#TagIdentifier) | The tag of the edge you want to find the opposite edge of. | Yes |
+| `edge` | [`TagIdentifier`](/docs/kcl-lang/types#TagIdentifier) | The tag of the edge you want to find the opposite edge of. | Yes |
 
 ### Returns
 

docs/kcl-std/getPreviousAdjacentEdge.md

@@ -12,12 +12,11 @@ Get the previous adjacent edge to the edge given.
 getPreviousAdjacentEdge(edge: TagIdentifier): Uuid
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `edge` | [`TagIdentifier`](/docs/kcl/types#TagIdentifier) | The tag of the edge you want to find the previous adjacent edge of. | Yes |
+| `edge` | [`TagIdentifier`](/docs/kcl-lang/types#TagIdentifier) | The tag of the edge you want to find the previous adjacent edge of. | Yes |
 
 ### Returns
 

docs/kcl-std/index.md

@@ -0,0 +1,160 @@
+---
+title: "KCL Standard Library"
+excerpt: "Documentation for the KCL standard library for the Zoo Design Studio."
+layout: manual
+---
+
+## Table of Contents
+
+### Functions
+
+* [**std**](/docs/kcl-std/modules/std)
+  * [`angledLine`](/docs/kcl-std/angledLine)
+  * [`angledLineThatIntersects`](/docs/kcl-std/angledLineThatIntersects)
+  * [`appearance`](/docs/kcl-std/appearance)
+  * [`arc`](/docs/kcl-std/arc)
+  * [`assert`](/docs/kcl-std/assert)
+  * [`assertIs`](/docs/kcl-std/assertIs)
+  * [`bezierCurve`](/docs/kcl-std/bezierCurve)
+  * [`circleThreePoint`](/docs/kcl-std/circleThreePoint)
+  * [`clone`](/docs/kcl-std/clone)
+  * [`close`](/docs/kcl-std/close)
+  * [`extrude`](/docs/kcl-std/extrude)
+  * [`getCommonEdge`](/docs/kcl-std/getCommonEdge)
+  * [`getNextAdjacentEdge`](/docs/kcl-std/getNextAdjacentEdge)
+  * [`getOppositeEdge`](/docs/kcl-std/getOppositeEdge)
+  * [`getPreviousAdjacentEdge`](/docs/kcl-std/getPreviousAdjacentEdge)
+  * [`helix`](/docs/kcl-std/functions/std-helix)
+  * [`intersect`](/docs/kcl-std/intersect)
+  * [`involuteCircular`](/docs/kcl-std/involuteCircular)
+  * [`lastSegX`](/docs/kcl-std/lastSegX)
+  * [`lastSegY`](/docs/kcl-std/lastSegY)
+  * [`legAngX`](/docs/kcl-std/legAngX)
+  * [`legAngY`](/docs/kcl-std/legAngY)
+  * [`legLen`](/docs/kcl-std/legLen)
+  * [`line`](/docs/kcl-std/line)
+  * [`loft`](/docs/kcl-std/loft)
+  * [`map`](/docs/kcl-std/map)
+  * [`offsetPlane`](/docs/kcl-std/functions/std-offsetPlane)
+  * [`patternCircular2d`](/docs/kcl-std/patternCircular2d)
+  * [`patternCircular3d`](/docs/kcl-std/patternCircular3d)
+  * [`patternLinear2d`](/docs/kcl-std/patternLinear2d)
+  * [`patternLinear3d`](/docs/kcl-std/patternLinear3d)
+  * [`patternTransform`](/docs/kcl-std/patternTransform)
+  * [`patternTransform2d`](/docs/kcl-std/patternTransform2d)
+  * [`polygon`](/docs/kcl-std/polygon)
+  * [`pop`](/docs/kcl-std/pop)
+  * [`profileStart`](/docs/kcl-std/profileStart)
+  * [`profileStartX`](/docs/kcl-std/profileStartX)
+  * [`profileStartY`](/docs/kcl-std/profileStartY)
+  * [`push`](/docs/kcl-std/push)
+  * [`reduce`](/docs/kcl-std/reduce)
+  * [`revolve`](/docs/kcl-std/functions/std-revolve)
+  * [`rotate`](/docs/kcl-std/rotate)
+  * [`scale`](/docs/kcl-std/scale)
+  * [`segAng`](/docs/kcl-std/segAng)
+  * [`segEnd`](/docs/kcl-std/segEnd)
+  * [`segEndX`](/docs/kcl-std/segEndX)
+  * [`segEndY`](/docs/kcl-std/segEndY)
+  * [`segLen`](/docs/kcl-std/segLen)
+  * [`segStart`](/docs/kcl-std/segStart)
+  * [`segStartX`](/docs/kcl-std/segStartX)
+  * [`segStartY`](/docs/kcl-std/segStartY)
+  * [`startProfile`](/docs/kcl-std/startProfile)
+  * [`startSketchOn`](/docs/kcl-std/startSketchOn)
+  * [`subtract`](/docs/kcl-std/subtract)
+  * [`subtract2d`](/docs/kcl-std/subtract2d)
+  * [`sweep`](/docs/kcl-std/sweep)
+  * [`tangentToEnd`](/docs/kcl-std/tangentToEnd)
+  * [`tangentialArc`](/docs/kcl-std/tangentialArc)
+  * [`translate`](/docs/kcl-std/translate)
+  * [`union`](/docs/kcl-std/union)
+  * [`xLine`](/docs/kcl-std/xLine)
+  * [`yLine`](/docs/kcl-std/yLine)
+* [**std::math**](/docs/kcl-std/modules/std-math)
+  * [`abs`](/docs/kcl-std/functions/std-math-abs)
+  * [`acos`](/docs/kcl-std/functions/std-math-acos)
+  * [`asin`](/docs/kcl-std/functions/std-math-asin)
+  * [`atan`](/docs/kcl-std/functions/std-math-atan)
+  * [`atan2`](/docs/kcl-std/functions/std-math-atan2)
+  * [`ceil`](/docs/kcl-std/functions/std-math-ceil)
+  * [`cos`](/docs/kcl-std/functions/std-math-cos)
+  * [`floor`](/docs/kcl-std/functions/std-math-floor)
+  * [`ln`](/docs/kcl-std/functions/std-math-ln)
+  * [`log`](/docs/kcl-std/functions/std-math-log)
+  * [`log10`](/docs/kcl-std/functions/std-math-log10)
+  * [`log2`](/docs/kcl-std/functions/std-math-log2)
+  * [`max`](/docs/kcl-std/functions/std-math-max)
+  * [`min`](/docs/kcl-std/functions/std-math-min)
+  * [`polar`](/docs/kcl-std/functions/std-math-polar)
+  * [`pow`](/docs/kcl-std/functions/std-math-pow)
+  * [`rem`](/docs/kcl-std/functions/std-math-rem)
+  * [`round`](/docs/kcl-std/functions/std-math-round)
+  * [`sin`](/docs/kcl-std/functions/std-math-sin)
+  * [`sqrt`](/docs/kcl-std/functions/std-math-sqrt)
+  * [`tan`](/docs/kcl-std/functions/std-math-tan)
+* [**std::sketch**](/docs/kcl-std/modules/std-sketch)
+  * [`circle`](/docs/kcl-std/functions/std-sketch-circle)
+  * [`mirror2d`](/docs/kcl-std/functions/std-sketch-mirror2d)
+* [**std::solid**](/docs/kcl-std/modules/std-solid)
+  * [`chamfer`](/docs/kcl-std/functions/std-solid-chamfer)
+  * [`fillet`](/docs/kcl-std/functions/std-solid-fillet)
+  * [`hollow`](/docs/kcl-std/functions/std-solid-hollow)
+  * [`shell`](/docs/kcl-std/functions/std-solid-shell)
+* [**std::units**](/docs/kcl-std/modules/std-units)
+  * [`units::toCentimeters`](/docs/kcl-std/functions/std-units-toCentimeters)
+  * [`units::toDegrees`](/docs/kcl-std/functions/std-units-toDegrees)
+  * [`units::toFeet`](/docs/kcl-std/functions/std-units-toFeet)
+  * [`units::toInches`](/docs/kcl-std/functions/std-units-toInches)
+  * [`units::toMeters`](/docs/kcl-std/functions/std-units-toMeters)
+  * [`units::toMillimeters`](/docs/kcl-std/functions/std-units-toMillimeters)
+  * [`units::toRadians`](/docs/kcl-std/functions/std-units-toRadians)
+  * [`units::toYards`](/docs/kcl-std/functions/std-units-toYards)
+
+### Constants
+
+* [**std**](/docs/kcl-std/modules/std)
+  * [`END`](/docs/kcl-std/consts/std-END)
+  * [`START`](/docs/kcl-std/consts/std-START)
+  * [`X`](/docs/kcl-std/consts/std-X)
+  * [`XY`](/docs/kcl-std/consts/std-XY)
+  * [`XZ`](/docs/kcl-std/consts/std-XZ)
+  * [`Y`](/docs/kcl-std/consts/std-Y)
+  * [`YZ`](/docs/kcl-std/consts/std-YZ)
+  * [`Z`](/docs/kcl-std/consts/std-Z)
+* [**std::math**](/docs/kcl-std/modules/std-math)
+  * [`E`](/docs/kcl-std/consts/std-math-E)
+  * [`PI`](/docs/kcl-std/consts/std-math-PI)
+  * [`TAU`](/docs/kcl-std/consts/std-math-TAU)
+* [**std::turns**](/docs/kcl-std/modules/std-turns)
+  * [`turns::HALF_TURN`](/docs/kcl-std/consts/std-turns-HALF_TURN)
+  * [`turns::QUARTER_TURN`](/docs/kcl-std/consts/std-turns-QUARTER_TURN)
+  * [`turns::THREE_QUARTER_TURN`](/docs/kcl-std/consts/std-turns-THREE_QUARTER_TURN)
+  * [`turns::ZERO`](/docs/kcl-std/consts/std-turns-ZERO)
+
+### Types
+
+See also the [types overview](/docs/kcl-lang/types)
+
+* [**Primitive types**](/docs/kcl-std/modules/Primitive types)
+  * [`End`](/docs/kcl-std/types#End)
+  * [`ImportedGeometry`](/docs/kcl-std/types#ImportedGeometry)
+  * [`Start`](/docs/kcl-std/types#Start)
+  * [`TagDeclarator`](/docs/kcl-std/types#TagDeclarator)
+  * [`TagIdentifier`](/docs/kcl-std/types#TagIdentifier)
+  * [`any`](/docs/kcl-std/types/std-types-any)
+  * [`bool`](/docs/kcl-std/types/std-types-bool)
+  * [`number`](/docs/kcl-std/types/std-types-number)
+  * [`string`](/docs/kcl-std/types/std-types-string)
+  * [`tag`](/docs/kcl-std/types/std-types-tag)
+* [**std::types**](/docs/kcl-std/modules/std-types)
+  * [`Axis2d`](/docs/kcl-std/types/std-types-Axis2d)
+  * [`Axis3d`](/docs/kcl-std/types/std-types-Axis3d)
+  * [`Edge`](/docs/kcl-std/types/std-types-Edge)
+  * [`Face`](/docs/kcl-std/types/std-types-Face)
+  * [`Helix`](/docs/kcl-std/types/std-types-Helix)
+  * [`Plane`](/docs/kcl-std/types/std-types-Plane)
+  * [`Point2d`](/docs/kcl-std/types/std-types-Point2d)
+  * [`Point3d`](/docs/kcl-std/types/std-types-Point3d)
+  * [`Sketch`](/docs/kcl-std/types/std-types-Sketch)
+  * [`Solid`](/docs/kcl-std/types/std-types-Solid)

docs/kcl-std/intersect.md

@@ -15,17 +15,16 @@ intersect(
 ): [Solid]
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solids` | [`[Solid]`](/docs/kcl/types/std-types-Solid) | The solids to intersect. | Yes |
-| `tolerance` | [`number`](/docs/kcl/types/std-types-number) | The tolerance to use for the intersection operation. | No |
+| `solids` | [`[Solid]`](/docs/kcl-std/types/std-types-Solid) | The solids to intersect. | Yes |
+| `tolerance` | [`number`](/docs/kcl-std/types/std-types-number) | The tolerance to use for the intersection operation. | No |
 
 ### Returns
 
-[`[Solid]`](/docs/kcl/types/std-types-Solid)
+[`[Solid]`](/docs/kcl-std/types/std-types-Solid)
 
 
 ### Examples

docs/kcl-std/involuteCircular.md

@@ -19,21 +19,20 @@ involuteCircular(
 ): Sketch
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
-| `startRadius` | [`number`](/docs/kcl/types/std-types-number) | The involute is described between two circles, start_radius is the radius of the inner circle. | Yes |
-| `endRadius` | [`number`](/docs/kcl/types/std-types-number) | The involute is described between two circles, end_radius is the radius of the outer circle. | Yes |
-| `angle` | [`number`](/docs/kcl/types/std-types-number) | The angle to rotate the involute by. A value of zero will produce a curve with a tangent along the x-axis at the start point of the curve. | Yes |
-| `reverse` | [`bool`](/docs/kcl/types/std-types-bool) | If reverse is true, the segment will start from the end of the involute, otherwise it will start from that start. Defaults to false. | No |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | Create a new tag which refers to this line | No |
+| `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
+| `startRadius` | [`number`](/docs/kcl-std/types/std-types-number) | The involute is described between two circles, start_radius is the radius of the inner circle. | Yes |
+| `endRadius` | [`number`](/docs/kcl-std/types/std-types-number) | The involute is described between two circles, end_radius is the radius of the outer circle. | Yes |
+| `angle` | [`number`](/docs/kcl-std/types/std-types-number) | The angle to rotate the involute by. A value of zero will produce a curve with a tangent along the x-axis at the start point of the curve. | Yes |
+| `reverse` | [`bool`](/docs/kcl-std/types/std-types-bool) | If reverse is true, the segment will start from the end of the involute, otherwise it will start from that start. Defaults to false. | No |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | Create a new tag which refers to this line | No |
 
 ### Returns
 
-[`Sketch`](/docs/kcl/types/std-types-Sketch)
+[`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/lastSegX.md

@@ -12,16 +12,15 @@ Extract the 'x' axis value of the last line segment in the provided 2-d sketch.
 lastSegX(sketch: Sketch): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/std-types-Sketch) | The sketch whose line segment is being queried | Yes |
+| `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | The sketch whose line segment is being queried | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/lastSegY.md

@@ -12,16 +12,15 @@ Extract the 'y' axis value of the last line segment in the provided 2-d sketch.
 lastSegY(sketch: Sketch): number
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/std-types-Sketch) | The sketch whose line segment is being queried | Yes |
+| `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | The sketch whose line segment is being queried | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples

docs/kcl-std/legAngX.md

@@ -15,21 +15,16 @@ legAngX(
 ): number
 ```
 
-### Tags
-
-* `utilities`
-
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `hypotenuse` | [`number`](/docs/kcl/types/std-types-number) | The length of the triangle's hypotenuse | Yes |
-| `leg` | [`number`](/docs/kcl/types/std-types-number) | The length of one of the triangle's legs (i.e. non-hypotenuse side) | Yes |
+| `hypotenuse` | [`number`](/docs/kcl-std/types/std-types-number) | The length of the triangle's hypotenuse | Yes |
+| `leg` | [`number`](/docs/kcl-std/types/std-types-number) | The length of one of the triangle's legs (i.e. non-hypotenuse side) | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples
@@ -39,3 +34,4 @@ legAngX(hypotenuse = 5, leg = 3)
 ```
 
 
+

docs/kcl-std/legAngY.md

@@ -15,21 +15,16 @@ legAngY(
 ): number
 ```
 
-### Tags
-
-* `utilities`
-
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `hypotenuse` | [`number`](/docs/kcl/types/std-types-number) | The length of the triangle's hypotenuse | Yes |
-| `leg` | [`number`](/docs/kcl/types/std-types-number) | The length of one of the triangle's legs (i.e. non-hypotenuse side) | Yes |
+| `hypotenuse` | [`number`](/docs/kcl-std/types/std-types-number) | The length of the triangle's hypotenuse | Yes |
+| `leg` | [`number`](/docs/kcl-std/types/std-types-number) | The length of one of the triangle's legs (i.e. non-hypotenuse side) | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples
@@ -39,3 +34,4 @@ legAngY(hypotenuse = 5, leg = 3)
 ```
 
 
+

docs/kcl-std/legLen.md

@@ -15,21 +15,16 @@ legLen(
 ): number
 ```
 
-### Tags
-
-* `utilities`
-
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `hypotenuse` | [`number`](/docs/kcl/types/std-types-number) | The length of the triangle's hypotenuse | Yes |
-| `leg` | [`number`](/docs/kcl/types/std-types-number) | The length of one of the triangle's legs (i.e. non-hypotenuse side) | Yes |
+| `hypotenuse` | [`number`](/docs/kcl-std/types/std-types-number) | The length of the triangle's hypotenuse | Yes |
+| `leg` | [`number`](/docs/kcl-std/types/std-types-number) | The length of one of the triangle's legs (i.e. non-hypotenuse side) | Yes |
 
 ### Returns
 
-[`number`](/docs/kcl/types/std-types-number)
+[`number`](/docs/kcl-std/types/std-types-number)
 
 
 ### Examples
@@ -39,3 +34,4 @@ legLen(hypotenuse = 5, leg = 3)
 ```
 
 
+

docs/kcl-std/line.md

@@ -17,19 +17,18 @@ line(
 ): Sketch
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
-| `endAbsolute` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | Which absolute point should this line go to? Incompatible with `end`. | No |
-| `end` | [`Point2d`](/docs/kcl/types/std-types-Point2d) | How far away (along the X and Y axes) should this line go? Incompatible with `endAbsolute`. | No |
-| [`tag`](/docs/kcl/types/std-types-tag) | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | Create a new tag which refers to this line | No |
+| `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
+| `endAbsolute` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | Which absolute point should this line go to? Incompatible with `end`. | No |
+| `end` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | How far away (along the X and Y axes) should this line go? Incompatible with `endAbsolute`. | No |
+| [`tag`](/docs/kcl-std/types/std-types-tag) | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | Create a new tag which refers to this line | No |
 
 ### Returns
 
-[`Sketch`](/docs/kcl/types/std-types-Sketch)
+[`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/loft.md

@@ -20,22 +20,21 @@ loft(
 ): Solid
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketches` | [`[Sketch]`](/docs/kcl/types/std-types-Sketch) | Which sketches to loft. Must include at least 2 sketches. | Yes |
-| `vDegree` | [`number`](/docs/kcl/types/std-types-number) | Degree of the interpolation. Must be greater than zero. For example, use 2 for quadratic, or 3 for cubic interpolation in the V direction. This defaults to 2, if not specified. | Yes |
-| `bezApproximateRational` | [`bool`](/docs/kcl/types/std-types-bool) | Attempt to approximate rational curves (such as arcs) using a bezier. This will remove banding around interpolations between arcs and non-arcs. It may produce errors in other scenarios Over time, this field won't be necessary. | Yes |
-| `baseCurveIndex` | [`number`](/docs/kcl/types/std-types-number) | This can be set to override the automatically determined topological base curve, which is usually the first section encountered. | No |
-| `tolerance` | [`number`](/docs/kcl/types/std-types-number) | Tolerance for the loft operation. | No |
-| `tagStart` | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | A named tag for the face at the start of the loft, i.e. the original sketch | No |
-| `tagEnd` | [`TagDeclarator`](/docs/kcl/types#TagDeclarator) | A named tag for the face at the end of the loft, i.e. the last sketch | No |
+| `sketches` | [`[Sketch]`](/docs/kcl-std/types/std-types-Sketch) | Which sketches to loft. Must include at least 2 sketches. | Yes |
+| `vDegree` | [`number`](/docs/kcl-std/types/std-types-number) | Degree of the interpolation. Must be greater than zero. For example, use 2 for quadratic, or 3 for cubic interpolation in the V direction. This defaults to 2, if not specified. | Yes |
+| `bezApproximateRational` | [`bool`](/docs/kcl-std/types/std-types-bool) | Attempt to approximate rational curves (such as arcs) using a bezier. This will remove banding around interpolations between arcs and non-arcs. It may produce errors in other scenarios Over time, this field won't be necessary. | Yes |
+| `baseCurveIndex` | [`number`](/docs/kcl-std/types/std-types-number) | This can be set to override the automatically determined topological base curve, which is usually the first section encountered. | No |
+| `tolerance` | [`number`](/docs/kcl-std/types/std-types-number) | Tolerance for the loft operation. | No |
+| `tagStart` | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | A named tag for the face at the start of the loft, i.e. the original sketch | No |
+| `tagEnd` | [`TagDeclarator`](/docs/kcl-lang/types#TagDeclarator) | A named tag for the face at the end of the loft, i.e. the last sketch | No |
 
 ### Returns
 
-[`Solid`](/docs/kcl/types/std-types-Solid)
+[`Solid`](/docs/kcl-std/types/std-types-Solid)
 
 
 ### Examples

docs/kcl-std/map.md

@@ -15,17 +15,16 @@ map(
 ): [any]
 ```
 
-
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `array` | [`[any]`](/docs/kcl/types/std-types-any) | Input array. The output array is this input array, but every element has had the function `f` run on it. | Yes |
+| `array` | [`[any]`](/docs/kcl-std/types/std-types-any) | Input array. The output array is this input array, but every element has had the function `f` run on it. | Yes |
 | `f` | `FunctionSource` | A function. The output array is just the input array, but `f` has been run on every item. | Yes |
 
 ### Returns
 
-[`[any]`](/docs/kcl/types/std-types-any)
+[`[any]`](/docs/kcl-std/types/std-types-any)
 
 
 ### Examples

docs/kcl-std/modules/std-math.md

@@ -0,0 +1,38 @@
+---
+title: "std::math"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+
+## Functions and constants
+
+* [`E`](/docs/kcl-std/consts/std-math-E)
+* [`PI`](/docs/kcl-std/consts/std-math-PI)
+* [`TAU`](/docs/kcl-std/consts/std-math-TAU)
+* [`abs`](/docs/kcl-std/functions/std-math-abs)
+* [`acos`](/docs/kcl-std/functions/std-math-acos)
+* [`asin`](/docs/kcl-std/functions/std-math-asin)
+* [`atan`](/docs/kcl-std/functions/std-math-atan)
+* [`atan2`](/docs/kcl-std/functions/std-math-atan2)
+* [`ceil`](/docs/kcl-std/functions/std-math-ceil)
+* [`cos`](/docs/kcl-std/functions/std-math-cos)
+* [`floor`](/docs/kcl-std/functions/std-math-floor)
+* [`ln`](/docs/kcl-std/functions/std-math-ln)
+* [`log`](/docs/kcl-std/functions/std-math-log)
+* [`log10`](/docs/kcl-std/functions/std-math-log10)
+* [`log2`](/docs/kcl-std/functions/std-math-log2)
+* [`max`](/docs/kcl-std/functions/std-math-max)
+* [`min`](/docs/kcl-std/functions/std-math-min)
+* [`polar`](/docs/kcl-std/functions/std-math-polar)
+* [`pow`](/docs/kcl-std/functions/std-math-pow)
+* [`rem`](/docs/kcl-std/functions/std-math-rem)
+* [`round`](/docs/kcl-std/functions/std-math-round)
+* [`sin`](/docs/kcl-std/functions/std-math-sin)
+* [`sqrt`](/docs/kcl-std/functions/std-math-sqrt)
+* [`tan`](/docs/kcl-std/functions/std-math-tan)
+

docs/kcl-std/modules/std-sketch.md

@@ -0,0 +1,16 @@
+---
+title: "std::sketch"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+
+## Functions and constants
+
+* [`circle`](/docs/kcl-std/functions/std-sketch-circle)
+* [`mirror2d`](/docs/kcl-std/functions/std-sketch-mirror2d)
+

docs/kcl-std/modules/std-solid.md

@@ -0,0 +1,18 @@
+---
+title: "std::solid"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+
+## Functions and constants
+
+* [`chamfer`](/docs/kcl-std/functions/std-solid-chamfer)
+* [`fillet`](/docs/kcl-std/functions/std-solid-fillet)
+* [`hollow`](/docs/kcl-std/functions/std-solid-hollow)
+* [`shell`](/docs/kcl-std/functions/std-solid-shell)
+

docs/kcl-std/modules/std-turns.md

@@ -0,0 +1,18 @@
+---
+title: "std::turns"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+
+## Functions and constants
+
+* [`turns::HALF_TURN`](/docs/kcl-std/consts/std-turns-HALF_TURN)
+* [`turns::QUARTER_TURN`](/docs/kcl-std/consts/std-turns-QUARTER_TURN)
+* [`turns::THREE_QUARTER_TURN`](/docs/kcl-std/consts/std-turns-THREE_QUARTER_TURN)
+* [`turns::ZERO`](/docs/kcl-std/consts/std-turns-ZERO)
+

docs/kcl-std/modules/std-types.md

@@ -0,0 +1,29 @@
+---
+title: "std::types"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+
+
+## Types
+
+* [`Axis2d`](/docs/kcl-std/types/std-types-Axis2d)
+* [`Axis3d`](/docs/kcl-std/types/std-types-Axis3d)
+* [`Edge`](/docs/kcl-std/types/std-types-Edge)
+* [`Face`](/docs/kcl-std/types/std-types-Face)
+* [`Helix`](/docs/kcl-std/types/std-types-Helix)
+* [`Plane`](/docs/kcl-std/types/std-types-Plane)
+* [`Point2d`](/docs/kcl-std/types/std-types-Point2d)
+* [`Point3d`](/docs/kcl-std/types/std-types-Point3d)
+* [`Sketch`](/docs/kcl-std/types/std-types-Sketch)
+* [`Solid`](/docs/kcl-std/types/std-types-Solid)
+* [`any`](/docs/kcl-std/types/std-types-any)
+* [`bool`](/docs/kcl-std/types/std-types-bool)
+* [`number`](/docs/kcl-std/types/std-types-number)
+* [`string`](/docs/kcl-std/types/std-types-string)
+* [`tag`](/docs/kcl-std/types/std-types-tag)

docs/kcl-std/modules/std-units.md

@@ -0,0 +1,22 @@
+---
+title: "std::units"
+excerpt: "Functions for converting numbers to different units. "
+layout: manual
+---
+
+Functions for converting numbers to different units. 
+
+
+
+
+## Functions and constants
+
+* [`units::toCentimeters`](/docs/kcl-std/functions/std-units-toCentimeters)
+* [`units::toDegrees`](/docs/kcl-std/functions/std-units-toDegrees)
+* [`units::toFeet`](/docs/kcl-std/functions/std-units-toFeet)
+* [`units::toInches`](/docs/kcl-std/functions/std-units-toInches)
+* [`units::toMeters`](/docs/kcl-std/functions/std-units-toMeters)
+* [`units::toMillimeters`](/docs/kcl-std/functions/std-units-toMillimeters)
+* [`units::toRadians`](/docs/kcl-std/functions/std-units-toRadians)
+* [`units::toYards`](/docs/kcl-std/functions/std-units-toYards)
+

docs/kcl-std/modules/std.md

@@ -0,0 +1,33 @@
+---
+title: "std"
+excerpt: "The KCL standard library "
+layout: manual
+---
+
+The KCL standard library 
+
+Contains frequently used constants, functions for interacting with the KittyCAD servers to create sketches and geometry, and utility functions. 
+
+## Modules
+
+* [`math`](/docs/kcl-std/modules/std-math)
+* [`sketch`](/docs/kcl-std/modules/std-sketch)
+* [`solid`](/docs/kcl-std/modules/std-solid)
+* [`turns::turns`](/docs/kcl-std/modules/std-turns)
+* [`types`](/docs/kcl-std/modules/std-types)
+* [`units::units`](/docs/kcl-std/modules/std-units)
+
+## Functions and constants
+
+* [`END`](/docs/kcl-std/consts/std-END)
+* [`START`](/docs/kcl-std/consts/std-START)
+* [`X`](/docs/kcl-std/consts/std-X)
+* [`XY`](/docs/kcl-std/consts/std-XY)
+* [`XZ`](/docs/kcl-std/consts/std-XZ)
+* [`Y`](/docs/kcl-std/consts/std-Y)
+* [`YZ`](/docs/kcl-std/consts/std-YZ)
+* [`Z`](/docs/kcl-std/consts/std-Z)
+* [`helix`](/docs/kcl-std/functions/std-helix)
+* [`offsetPlane`](/docs/kcl-std/functions/std-offsetPlane)
+* [`revolve`](/docs/kcl-std/functions/std-revolve)
+