Revert "Add uniqueness check to "Create project" command (#5100)"

This reverts commit dac91d3b79.

.env.development

@@ -2,8 +2,8 @@ NODE_ENV=development
 DEV=true
 VITE_KC_API_WS_MODELING_URL=wss://api.dev.zoo.dev/ws/modeling/commands
 VITE_KC_API_BASE_URL=https://api.dev.zoo.dev
+BASE_URL=https://api.dev.zoo.dev
 VITE_KC_SITE_BASE_URL=https://dev.zoo.dev
-VITE_KC_SITE_APP_URL=https://app.dev.zoo.dev
 VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=5000
 # ONLY add your token in .env.development.local if you want to skip auth, otherwise this token takes precedence!

.env.production

@@ -1,7 +1,5 @@
-NODE_ENV=production
 VITE_KC_API_WS_MODELING_URL=wss://api.zoo.dev/ws/modeling/commands
 VITE_KC_API_BASE_URL=https://api.zoo.dev
 VITE_KC_SITE_BASE_URL=https://zoo.dev
-VITE_KC_SITE_APP_URL=https://app.zoo.dev
 VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=15000

.eslintrc

@@ -29,13 +29,6 @@
         {
           "name": "isNaN",
           "message": "Use Number.isNaN() instead."
-        },
-      ],
-      "no-restricted-syntax": [
-        "error",
-        {
-          "selector": "CallExpression[callee.object.name='Array'][callee.property.name='isArray']",
-          "message": "Use isArray() in lib/utils.ts instead of Array.isArray()."
         }
       ],
       "semi": [

.github/workflows/build-apps.yml

@@ -134,6 +134,8 @@ jobs:
           max_attempts: 3
           command: yarn install
 
+      - run: yarn tronb:vite
+
       - name: Prepare certificate and variables (Windows only)
         if: ${{ (env.IS_RELEASE == 'true' || env.IS_NIGHTLY == 'true') && matrix.os == 'windows-2022' }}
         run: |
@@ -163,8 +165,8 @@ jobs:
       - name: Build the app (debug)
         if: ${{ env.IS_RELEASE == 'false' && env.IS_NIGHTLY == 'false' }}
         # electron-builder doesn't have a concept of release vs debug,
-        # this is just not doing any codesign or release yml generation, and points to dev infra
-        run: yarn tronb:package:dev
+        # this is just not doing any codesign or release yml generation
+        run: yarn electron-builder --config
 
       - name: Build the app (release)
         if: ${{ env.IS_RELEASE == 'true' || env.IS_NIGHTLY == 'true' }}
@@ -183,7 +185,7 @@ jobs:
         with:
           timeout_minutes: 10
           max_attempts: 3
-          command: yarn tronb:package:prod
+          command: yarn electron-builder --config --publish always
 
       - name: List artifacts in out/
         run: ls -R out
@@ -244,7 +246,7 @@ jobs:
         with:
           timeout_minutes: 10
           max_attempts: 3
-          command: yarn tronb:package:prod
+          command: yarn electron-builder --config --publish always
 
       - uses: actions/upload-artifact@v4
         if: ${{ env.IS_RELEASE == 'true' }}
@@ -388,19 +390,19 @@ jobs:
 
       - name: Authenticate to Google Cloud
         if: ${{ env.IS_NIGHTLY == 'true' }}
-        uses: 'google-github-actions/auth@v2.1.8'
+        uses: 'google-github-actions/auth@v2.1.7'
         with:
           credentials_json: '${{ secrets.GOOGLE_CLOUD_DL_SA }}'
 
       - name: Set up Google Cloud SDK
         if: ${{ env.IS_NIGHTLY == 'true' }}
-        uses: google-github-actions/setup-gcloud@v2.1.4
+        uses: google-github-actions/setup-gcloud@v2.1.2
         with:
           project_id: ${{ env.GOOGLE_CLOUD_PROJECT_ID }}
 
       - name: Upload nightly files to public bucket
         if: ${{ env.IS_NIGHTLY == 'true' }}
-        uses: google-github-actions/upload-cloud-storage@v2.2.2
+        uses: google-github-actions/upload-cloud-storage@v2.2.1
         with:
           path: out
           glob: '*'

.github/workflows/cargo-bench.yml

@@ -0,0 +1,44 @@
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '**.rs'
+      - '**/Cargo.toml'
+      - '**/Cargo.lock'
+      - '**/rust-toolchain.toml'
+      - .github/workflows/cargo-bench.yml
+  pull_request:
+    paths:
+      - '**.rs'
+      - '**/Cargo.toml'
+      - '**/Cargo.lock'
+      - '**/rust-toolchain.toml'
+      - .github/workflows/cargo-bench.yml
+  workflow_dispatch:
+permissions: read-all
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+name: cargo bench
+jobs:
+  cargo-bench:
+    name: Benchmark with iai
+    runs-on: ubuntu-latest-8-cores
+    steps:
+      - uses: actions/checkout@v4
+      - uses: dtolnay/rust-toolchain@stable
+      - name: Install dependencies
+        run: |
+          cargo install cargo-criterion
+          sudo apt update
+          sudo apt install -y valgrind
+      - name: Rust Cache
+        uses: Swatinem/rust-cache@v2.6.1
+      - name: Benchmark kcl library
+        shell: bash
+        run: |-
+          cd src/wasm-lib/kcl; cargo bench --all-features -- iai
+        env:
+          KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN}}
+

.github/workflows/e2e-tests.yml

@@ -3,6 +3,7 @@ on:
   push:
     branches: [ main ]
   pull_request:
+    branches: [ main ]
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
@@ -45,15 +46,7 @@ jobs:
     runs-on: ${{ matrix.os }}
     needs: check-rust-changes
     steps:
-    - uses: actions/create-github-app-token@v1
-      id: app-token
-      with:
-        app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
-        private-key: ${{ secrets.MODELING_APP_GH_APP_PRIVATE_KEY }}
-        owner: ${{ github.repository_owner }}
     - uses: actions/checkout@v4
-      with:
-        token: ${{ steps.app-token.outputs.token }}
     - uses: actions/setup-node@v4
       with:
         node-version-file: '.nvmrc'
@@ -130,9 +123,9 @@ jobs:
       if: steps.download-wasm.outcome == 'failure'
       shell: bash
       run: yarn build:wasm
-    - name: build web
+    - name: build electron
       shell: bash
-      run: yarn tronb:vite:dev
+      run: yarn tron:package
     - name: Run ubuntu/chrome snapshots
       if: ${{ matrix.os == 'namespace-profile-ubuntu-8-cores' && matrix.shardIndex == 1 }}
       shell: bash
@@ -160,11 +153,11 @@ jobs:
       continue-on-error: true
       run: rm -r test-results
     - name: check for changes
-      if: ${{ matrix.os == 'namespace-profile-ubuntu-8-cores' && matrix.shardIndex == 1 && github.ref != 'refs/heads/main' }}
+      if: ${{ matrix.os == 'namespace-profile-ubuntu-8-cores' && matrix.shardIndex == 1 }}
       shell: bash
       id: git-check
       run: |
-          git add e2e/playwright/snapshot-tests.spec.ts-snapshots
+          git add .
           if git status | grep -q "Changes to be committed"
           then echo "modified=true" >> $GITHUB_OUTPUT
           else echo "modified=false" >> $GITHUB_OUTPUT
@@ -173,14 +166,14 @@ jobs:
       if: steps.git-check.outputs.modified == 'true'
       shell: bash
       run: |
-        git add e2e/playwright/snapshot-tests.spec.ts-snapshots
+        git add .
         git config --local user.email "github-actions[bot]@users.noreply.github.com"
         git config --local user.name "github-actions[bot]"
         git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
         git fetch origin
         echo ${{ github.head_ref }}
         git checkout ${{ github.head_ref }}
-        git commit -m "A snapshot a day keeps the bugs away! 📷🐛 (OS: ${{matrix.os}})" || true
+        git commit -am "A snapshot a day keeps the bugs away! 📷🐛 (OS: ${{matrix.os}})" || true
         git push
         git push origin ${{ github.head_ref }}
     # only upload artifacts if there's actually changes

.github/workflows/publish-apps-release.yml

@@ -108,17 +108,17 @@ jobs:
         run: yarn files:set-notes
 
       - name: Authenticate to Google Cloud
-        uses: 'google-github-actions/auth@v2.1.8'
+        uses: 'google-github-actions/auth@v2.1.7'
         with:
           credentials_json: '${{ secrets.GOOGLE_CLOUD_DL_SA }}'
 
       - name: Set up Google Cloud SDK
-        uses: google-github-actions/setup-gcloud@v2.1.4
+        uses: google-github-actions/setup-gcloud@v2.1.2
         with:
           project_id: ${{ env.GOOGLE_CLOUD_PROJECT_ID }}
 
       - name: Upload release files to public bucket
-        uses: google-github-actions/upload-cloud-storage@v2.2.2
+        uses: google-github-actions/upload-cloud-storage@v2.2.1
         with:
           path: out
           glob: '*'

.gitignore

@@ -25,7 +25,6 @@ yarn-error.log*
 
 .idea
 .vscode
-.helix
 src/wasm-lib/.idea
 src/wasm-lib/.vscode
 
@@ -45,7 +44,7 @@ e2e/playwright/temp3.png
 e2e/playwright/export-snapshots/*
 !e2e/playwright/export-snapshots/*.png
 
-/kcl-samples
+
 /test-results/
 /playwright-report/
 /blob-report/

.helix/config.toml

@@ -1,2 +0,0 @@
-[editor]
-auto-format = true

.helix/languages.toml

@@ -1,10 +0,0 @@
-[language-server.eslint]
-args = ["--stdio"]
-command = "vscode-eslint-language-server"
-
-[[language]]
-name = "typescript"
-auto-format = true
-formatter = { command = "node_modules/.bin/prettier", args = ["--parser", "typescript"] }
-language-servers = [ { name = "eslint", only-features = [ "diagnostics" ] }, "typescript-language-server" ]
-

README.md

@@ -101,7 +101,7 @@ This will start the application and hot-reload on changes.
 
 Devtools can be opened with the usual Cmd-Opt-I (Mac) or Ctrl-Shift-I (Linux and Windows).
 
-To build with electron-builder, run `yarn tronb:package:dev` (or `yarn tronb:package:prod` to point to the .env.production variables)
+To build, run `yarn tron:package`.
 
 ## Checking out commits / Bisecting
 

docs/kcl/fillet.md

@@ -36,12 +36,12 @@ filletRadius = 2
 
 mountingPlateSketch = startSketchOn("XY")
   |> startProfileAt([-width / 2, -length / 2], %)
-  |> line(endAbsolute = [width / 2, -length / 2], tag = $edge1)
-  |> line(endAbsolute = [width / 2, length / 2], tag = $edge2)
-  |> line(endAbsolute = [-width / 2, length / 2], tag = $edge3)
-  |> close(tag = $edge4)
+  |> lineTo([width / 2, -length / 2], %, $edge1)
+  |> lineTo([width / 2, length / 2], %, $edge2)
+  |> lineTo([-width / 2, length / 2], %, $edge3)
+  |> close(%, $edge4)
 
-mountingPlate = extrude(mountingPlateSketch, length = thickness)
+mountingPlate = extrude(thickness, mountingPlateSketch)
   |> fillet({
        radius = filletRadius,
        tags = [
@@ -63,12 +63,12 @@ filletRadius = 1
 
 mountingPlateSketch = startSketchOn("XY")
   |> startProfileAt([-width / 2, -length / 2], %)
-  |> line(endAbsolute = [width / 2, -length / 2], tag = $edge1)
-  |> line(endAbsolute = [width / 2, length / 2], tag = $edge2)
-  |> line(endAbsolute = [-width / 2, length / 2], tag = $edge3)
-  |> close(tag = $edge4)
+  |> lineTo([width / 2, -length / 2], %, $edge1)
+  |> lineTo([width / 2, length / 2], %, $edge2)
+  |> lineTo([-width / 2, length / 2], %, $edge3)
+  |> close(%, $edge4)
 
-mountingPlate = extrude(mountingPlateSketch, length = thickness)
+mountingPlate = extrude(thickness, mountingPlateSketch)
   |> fillet({
        radius = filletRadius,
        tolerance = 0.000001,

docs/kcl/import.md

@@ -4,16 +4,14 @@ excerpt: "Import a CAD file."
 layout: manual
 ---
 
-**WARNING:** This function is deprecated.
-
 Import a CAD file.
 
-**DEPRECATED** Prefer to use import statements.
-
 For formats lacking unit data (such as STL, OBJ, or PLY files), the default unit of measurement is millimeters. Alternatively you may specify the unit by passing your desired measurement unit in the options parameter. When importing a GLTF file, the bin file will be imported as well. Import paths are relative to the current project directory.
 
 Note: The import command currently only works when using the native Modeling App.
 
+For importing KCL functions using the `import` statement, see the docs on [KCL modules](/docs/kcl/modules).
+
 ```js
 import(file_path: String, options?: ImportFormat) -> ImportedGeometry
 ```

docs/kcl/index.md

@@ -51,6 +51,7 @@ layout: manual
 * [`helixRevolutions`](kcl/helixRevolutions)
 * [`hole`](kcl/hole)
 * [`hollow`](kcl/hollow)
+* [`import`](kcl/import)
 * [`inch`](kcl/inch)
 * [`lastSegX`](kcl/lastSegX)
 * [`lastSegY`](kcl/lastSegY)
@@ -58,6 +59,7 @@ layout: manual
 * [`legAngY`](kcl/legAngY)
 * [`legLen`](kcl/legLen)
 * [`line`](kcl/line)
+* [`lineTo`](kcl/lineTo)
 * [`ln`](kcl/ln)
 * [`loft`](kcl/loft)
 * [`log`](kcl/log)

docs/kcl/patternTransform2d.md

@@ -9,7 +9,7 @@ Just like patternTransform, but works on 2D sketches not 3D solids.
 
 
 ```js
-patternTransform2d(total_instances: integer, transform_function: FunctionParam, solid_set: SketchSet, use_original?: bool) -> [Sketch]
+patternTransform2d(total_instances: integer, transform_function: FunctionParam, solid_set: SketchSet) -> [Sketch]
 ```
 
 
@@ -20,7 +20,6 @@ patternTransform2d(total_instances: integer, transform_function: FunctionParam,
 | `total_instances` | `integer` |  | Yes |
 | `transform_function` | `FunctionParam` |  | Yes |
 | `solid_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
-| `use_original` | `bool` |  | No |
 
 ### Returns
 

docs/kcl/types.md

@@ -47,19 +47,6 @@ myObj = { a = 0, b = "thing" }
 We support two different ways of getting properties from objects, you can call
 `myObj.a` or `myObj["a"]` both work.
 
-## Binary expressions
-
-You can also do math! Let's show an example below:
-
-```
-myMathExpression = 3 + 1 * 2 / 3 - 7
-```
-
-You can nest expressions in parenthesis as well:
-
-```
-myMathExpression = 3 + (1 * 2 / (3 - 7))
-```
 
 ## Functions
 
@@ -74,107 +61,21 @@ fn myFn(x) {
 
 As you can see above `myFn` just returns whatever it is given.
 
-KCL's early drafts used positional arguments, but we now use keyword arguments. If you declare a
-function like this:
+
+## Binary expressions
+
+You can also do math! Let's show an example below:
 
 ```
-fn add(left, right) {
-  return left + right
-}
+myMathExpression = 3 + 1 * 2 / 3 - 7
 ```
 
-You can call it like this:
+You can nest expressions in parenthesis as well:
 
 ```
-total = add(left = 1, right = 2)
+myMathExpression = 3 + (1 * 2 / (3 - 7))
 ```
 
-Functions can also declare one *unlabeled* arg. If you do want to declare an unlabeled arg, it must
-be the first arg declared.
-
-```
-// The @ indicates an argument can be used without a label.
-// Note that only the first argument can use @.
-fn increment(@x) {
-  return x + 1
-}
-
-fn add(@x, delta) {
-  return x + delta
-}
-
-two = increment(1)
-three = add(1, delta = 2)
-```
-
-## Pipelines
-
-It can be hard to read repeated function calls, because of all the nested brackets.
-
-```
-i = 1
-x = h(g(f(i)))
-```
-
-You can make this easier to read by breaking it into many declarations, but that is a bit annoying.
-
-```
-i  = 1
-x0 = f(i)
-x1 = g(x0)
-x  = h(x1)
-```
-
-Instead, you can use the pipeline operator (`|>`) to simplify this.
-
-Basically, `x |> f(%)` is a shorthand for `f(x)`. The left-hand side of the `|>` gets put into
-the `%` in the right-hand side.
-
-So, this means `x |> f(%) |> g(%)` is shorthand for `g(f(x))`. The code example above, with its
-somewhat-clunky `x0` and `x1` constants could be rewritten as
-
-```
-i = 1
-x = i
-|> f(%)
-|> g(%)
-|> h(%)
-```
-
-This helps keep your code neat and avoid unnecessary declarations.
-
-## Pipelines and keyword arguments
-
-Say you have a long pipeline of sketch functions, like this:
-
-```
-startSketch()
-|> line(%, end = [3, 4])
-|> line(%, end = [10, 10])
-|> line(%, end = [-13, -14])
-|> close(%)
-```
-
-In this example, each function call outputs a sketch, and it gets put into the next function call via
-the `%`, into the first (unlabeled) argument.
-
-If a function call uses an unlabeled first parameter, it will default to `%` if it's not given. This
-means that `|> line(%, end = [3, 4])` and `|> line(end = [3, 4])` are equivalent! So the above
-could be rewritten as 
-
-```
-startSketch()
-|> line(end = [3, 4])
-|> line(end = [10, 10])
-|> line(end = [-13, -14])
-|> close()
-```
-
-Note that we are still in the process of migrating KCL's standard library to use keyword arguments. So some
-functions are still unfortunately using positional arguments. We're moving them over, so keep checking back.
-Some functions like `angledLine`, `startProfileAt` etc are still using the old positional argument syntax.
-Check the docs page for each function and look at its examples to see.
-
 ## Tags
 
 Tags are used to give a name (tag) to a specific path.
@@ -187,17 +88,17 @@ way:
 ```
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-  |> angledLine({
-       angle = segAng(rectangleSegmentA001) - 90,
-       length = 196.99,
-     }, %, $rectangleSegmentB001)
-  |> angledLine({
-       angle = segAng(rectangleSegmentA001),
-       length = -segLen(rectangleSegmentA001),
-     }, %, $rectangleSegmentC001)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
+  |> angledLine([0, 191.26], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       196.99
+     ], %, $rectangleSegmentB001)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $rectangleSegmentC001)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
 ```
 
 ### Tag Identifier
@@ -220,17 +121,17 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
-         angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
-         angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
+    |> angledLine([0, 191.26], %, $rectangleSegmentA001)
+    |> angledLine([
+         segAng(rectangleSegmentA001) - 90,
+         196.99
+       ], %, $rectangleSegmentB001)
+    |> angledLine([
+         segAng(rectangleSegmentA001),
+         -segLen(rectangleSegmentA001)
+       ], %, $rectangleSegmentC001)
+    |> lineTo([profileStartX(%), profileStartY(%)], %)
+    |> close(%)
 }
 
 rect([0, 0])
@@ -248,17 +149,17 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
-         angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
-         angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
+    |> angledLine([0, 191.26], %, $rectangleSegmentA001)
+    |> angledLine([
+         segAng(rectangleSegmentA001) - 90,
+         196.99
+       ], %, $rectangleSegmentB001)
+    |> angledLine([
+         segAng(rectangleSegmentA001),
+         -segLen(rectangleSegmentA001)
+       ], %, $rectangleSegmentC001)
+    |> lineTo([profileStartX(%), profileStartY(%)], %)
+    |> close(%)
 }
 
 rect([0, 0])