Bump vitest to 1.6.1 and 2.1.9 (#5257)

* Bump vitest to 1.6.1 and 2.1.9

* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)

* bad bot

* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)

---------

Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Pierre Jacquier <pierre@zoo.dev>
Co-authored-by: Pierre Jacquier <pierrejacquier39@gmail.com>

.github/workflows/e2e-tests.yml

@@ -46,7 +46,15 @@ jobs:
     runs-on: ${{ matrix.os }}
     needs: check-rust-changes
     steps:
+    - uses: actions/create-github-app-token@v1
+      id: app-token
+      with:
+        app-id: ${{ secrets.GH_ORG_APP_ID }}
+        private-key: ${{ secrets.GH_ORG_APP_PRIVATE_KEY }}
+        owner: ${{ github.repository_owner }}
     - uses: actions/checkout@v4
+      with:
+        token: ${{ steps.app-token.outputs.token }}
     - uses: actions/setup-node@v4
       with:
         node-version-file: '.nvmrc'
@@ -126,20 +134,20 @@ jobs:
     - name: build web
       shell: bash
       run: yarn tronb:vite:dev
-    # - name: Run ubuntu/chrome snapshots
-    #   if: ${{ matrix.os == 'namespace-profile-ubuntu-8-cores' && matrix.shardIndex == 1 }}
-    #   shell: bash
-    #   # TODO: break this in its own job, for now it's not slowing down the overall execution as ubuntu is the quickest,
-    #   # but we could do better. This forces a large 1/1 shard of all 20 snapshot tests that runs in about 3 minutes.
-    #   run: |
-    #     PLATFORM=web yarn playwright test --config=playwright.config.ts --retries="3" --update-snapshots --grep=@snapshot  --shard=1/1
-    #   env:
-    #     CI: true
-    #     NODE_ENV: development
-    #     VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-    #     VITE_KC_SKIP_AUTH: true
-    #     token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-    #     snapshottoken: ${{ secrets.KITTYCAD_API_TOKEN }}
+    - name: Run ubuntu/chrome snapshots
+      if: ${{ matrix.os == 'namespace-profile-ubuntu-8-cores' && matrix.shardIndex == 1 }}
+      shell: bash
+      # TODO: break this in its own job, for now it's not slowing down the overall execution as ubuntu is the quickest,
+      # but we could do better. This forces a large 1/1 shard of all 20 snapshot tests that runs in about 3 minutes.
+      run: |
+        PLATFORM=web yarn playwright test --config=playwright.config.ts --retries="3" --update-snapshots --grep=@snapshot  --shard=1/1
+      env:
+        CI: true
+        NODE_ENV: development
+        VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
+        VITE_KC_SKIP_AUTH: true
+        token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
+        snapshottoken: ${{ secrets.KITTYCAD_API_TOKEN }}
     - uses: actions/upload-artifact@v4
       if: ${{ !cancelled() && (success() || failure()) }}
       with:
@@ -162,20 +170,20 @@ jobs:
           then echo "modified=true" >> $GITHUB_OUTPUT
           else echo "modified=false" >> $GITHUB_OUTPUT
           fi
-    # - name: Commit changes, if any
-    #   if: steps.git-check.outputs.modified == 'true'
-    #   shell: bash
-    #   run: |
-    #     git add .
-    #     git config --local user.email "github-actions[bot]@users.noreply.github.com"
-    #     git config --local user.name "github-actions[bot]"
-    #     git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
-    #     git fetch origin
-    #     echo ${{ github.head_ref }}
-    #     git checkout ${{ github.head_ref }}
-    #     git commit -am "A snapshot a day keeps the bugs away! 📷🐛 (OS: ${{matrix.os}})" || true
-    #     git push
-    #     git push origin ${{ github.head_ref }}
+    - name: Commit changes, if any
+      if: steps.git-check.outputs.modified == 'true'
+      shell: bash
+      run: |
+        git add .
+        git config --local user.email "github-actions[bot]@users.noreply.github.com"
+        git config --local user.name "github-actions[bot]"
+        git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
+        git fetch origin
+        echo ${{ github.head_ref }}
+        git checkout ${{ github.head_ref }}
+        git commit -am "A snapshot a day keeps the bugs away! 📷🐛 (OS: ${{matrix.os}})" || true
+        git push
+        git push origin ${{ github.head_ref }}
     # only upload artifacts if there's actually changes
     - uses: actions/upload-artifact@v4
       if: steps.git-check.outputs.modified == 'true'

.gitignore

@@ -25,6 +25,7 @@ yarn-error.log*
 
 .idea
 .vscode
+.helix
 src/wasm-lib/.idea
 src/wasm-lib/.vscode
 

.helix/config.toml

@@ -0,0 +1,2 @@
+[editor]
+auto-format = true

.helix/languages.toml

@@ -0,0 +1,10 @@
+[language-server.eslint]
+args = ["--stdio"]
+command = "vscode-eslint-language-server"
+
+[[language]]
+name = "typescript"
+auto-format = true
+formatter = { command = "node_modules/.bin/prettier", args = ["--parser", "typescript"] }
+language-servers = [ { name = "eslint", only-features = [ "diagnostics" ] }, "typescript-language-server" ]
+

docs/kcl/appearance.md

@@ -31,12 +31,12 @@ appearance(data: AppearanceData, solid_set: SolidSet) -> SolidSet
 // Add color to an extruded solid.
 exampleSketch = startSketchOn("XZ")
   |> startProfileAt([0, 0], %)
-  |> lineTo([10, 0], %)
-  |> lineTo([0, 10], %)
-  |> lineTo([-10, 0], %)
-  |> close(%)
+  |> line(endAbsolute = [10, 0])
+  |> line(endAbsolute = [0, 10])
+  |> line(endAbsolute = [-10, 0])
+  |> close()
 
-example = extrude(5, exampleSketch)
+example = extrude(exampleSketch, length = 5)
   |> appearance({
        color = '#ff0000',
        metalness = 50,
@@ -65,11 +65,11 @@ sketch001 = startSketchOn('XY')
 fn cube(center) {
   return startSketchOn('XY')
     |> startProfileAt([center[0] - 10, center[1] - 10], %)
-    |> lineTo([center[0] + 10, center[1] - 10], %)
-    |> lineTo([center[0] + 10, center[1] + 10], %)
-    |> lineTo([center[0] - 10, center[1] + 10], %)
-    |> close(%)
-    |> extrude(10, %)
+    |> line(endAbsolute = [center[0] + 10, center[1] - 10])
+    |> line(endAbsolute = [center[0] + 10, center[1] + 10])
+    |> line(endAbsolute = [center[0] - 10, center[1] + 10])
+    |> close()
+    |> extrude(length = 10)
 }
 
 example0 = cube([0, 0])
@@ -95,11 +95,11 @@ appearance({
 // This example shows setting the appearance _after_ the shell.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line([24, 0], %)
-  |> line([0, -24], %)
-  |> line([-24, 0], %)
-  |> close(%)
-  |> extrude(6, %)
+  |> line(end = [24, 0])
+  |> line(end = [0, -24])
+  |> line(end = [-24, 0])
+  |> close()
+  |> extrude(length = 6)
 
 shell({ faces = ['end'], thickness = 0.25 }, firstSketch)
   |> appearance({
@@ -116,11 +116,11 @@ shell({ faces = ['end'], thickness = 0.25 }, firstSketch)
 // This example shows setting the appearance _before_ the shell.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line([24, 0], %)
-  |> line([0, -24], %)
-  |> line([-24, 0], %)
-  |> close(%)
-  |> extrude(6, %)
+  |> line(end = [24, 0])
+  |> line(end = [0, -24])
+  |> line(end = [-24, 0])
+  |> close()
+  |> extrude(length = 6)
   |> appearance({
        color = '#ff0000',
        metalness = 90,
@@ -137,12 +137,12 @@ shell({ faces = ['end'], thickness = 0.25 }, firstSketch)
 // This example shows _before_ the pattern.
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line([0, 2], %)
-  |> line([3, 1], %)
-  |> line([0, -4], %)
-  |> close(%)
+  |> line(end = [0, 2])
+  |> line(end = [3, 1])
+  |> line(end = [0, -4])
+  |> close()
 
-example = extrude(1, exampleSketch)
+example = extrude(exampleSketch, length = 1)
   |> appearance({
        color = '#ff0000',
        metalness = 90,
@@ -162,12 +162,12 @@ example = extrude(1, exampleSketch)
 // This example shows _after_ the pattern.
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line([0, 2], %)
-  |> line([3, 1], %)
-  |> line([0, -4], %)
-  |> close(%)
+  |> line(end = [0, 2])
+  |> line(end = [3, 1])
+  |> line(end = [0, -4])
+  |> close()
 
-example = extrude(1, exampleSketch)
+example = extrude(exampleSketch, length = 1)
   |> patternLinear3d({
        axis = [1, 0, 1],
        instances = 7,
@@ -186,10 +186,10 @@ example = extrude(1, exampleSketch)
 // Color the result of a 2D pattern that was extruded.
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([.5, 25], %)
-  |> line([0, 5], %)
-  |> line([-1, 0], %)
-  |> line([0, -5], %)
-  |> close(%)
+  |> line(end = [0, 5])
+  |> line(end = [-1, 0])
+  |> line(end = [0, -5])
+  |> close()
   |> patternCircular2d({
        center = [0, 0],
        instances = 13,
@@ -197,7 +197,7 @@ exampleSketch = startSketchOn('XZ')
        rotateDuplicates = true
      }, %)
 
-example = extrude(1, exampleSketch)
+example = extrude(exampleSketch, length = 1)
   |> appearance({
        color = '#ff0000',
        metalness = 90,
@@ -214,11 +214,11 @@ example = extrude(1, exampleSketch)
 // Create a path for the sweep.
 sweepPath = startSketchOn('XZ')
   |> startProfileAt([0.05, 0.05], %)
-  |> line([0, 7], %)
+  |> line(end = [0, 7])
   |> tangentialArc({ offset = 90, radius = 5 }, %)
-  |> line([-3, 0], %)
+  |> line(end = [-3, 0])
   |> tangentialArc({ offset = -90, radius = 5 }, %)
-  |> line([0, 7], %)
+  |> line(end = [0, 7])
 
 pipeHole = startSketchOn('XY')
   |> circle({ center = [0, 0], radius = 1.5 }, %)

docs/kcl/fillet.md

@@ -36,12 +36,12 @@ filletRadius = 2
 
 mountingPlateSketch = startSketchOn("XY")
   |> startProfileAt([-width / 2, -length / 2], %)
-  |> lineTo([width / 2, -length / 2], %, $edge1)
-  |> lineTo([width / 2, length / 2], %, $edge2)
-  |> lineTo([-width / 2, length / 2], %, $edge3)
-  |> close(%, $edge4)
+  |> line(endAbsolute = [width / 2, -length / 2], tag = $edge1)
+  |> line(endAbsolute = [width / 2, length / 2], tag = $edge2)
+  |> line(endAbsolute = [-width / 2, length / 2], tag = $edge3)
+  |> close(tag = $edge4)
 
-mountingPlate = extrude(thickness, mountingPlateSketch)
+mountingPlate = extrude(mountingPlateSketch, length = thickness)
   |> fillet({
        radius = filletRadius,
        tags = [
@@ -63,12 +63,12 @@ filletRadius = 1
 
 mountingPlateSketch = startSketchOn("XY")
   |> startProfileAt([-width / 2, -length / 2], %)
-  |> lineTo([width / 2, -length / 2], %, $edge1)
-  |> lineTo([width / 2, length / 2], %, $edge2)
-  |> lineTo([-width / 2, length / 2], %, $edge3)
-  |> close(%, $edge4)
+  |> line(endAbsolute = [width / 2, -length / 2], tag = $edge1)
+  |> line(endAbsolute = [width / 2, length / 2], tag = $edge2)
+  |> line(endAbsolute = [-width / 2, length / 2], tag = $edge3)
+  |> close(tag = $edge4)
 
-mountingPlate = extrude(thickness, mountingPlateSketch)
+mountingPlate = extrude(mountingPlateSketch, length = thickness)
   |> fillet({
        radius = filletRadius,
        tolerance = 0.000001,

docs/kcl/getNextAdjacentEdge.md

@@ -29,14 +29,14 @@ getNextAdjacentEdge(tag: TagIdentifier) -> Uuid
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line([10, 0], %)
+  |> line(end = [10, 0])
   |> angledLine({ angle = 60, length = 10 }, %)
   |> angledLine({ angle = 120, length = 10 }, %)
-  |> line([-10, 0], %)
+  |> line(end = [-10, 0])
   |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
-  |> close(%)
+  |> close()
 
-example = extrude(5, exampleSketch)
+example = extrude(exampleSketch, length = 5)
   |> fillet({
        radius = 3,
        tags = [getNextAdjacentEdge(referenceEdge)]

docs/kcl/getOppositeEdge.md

@@ -29,14 +29,14 @@ getOppositeEdge(tag: TagIdentifier) -> Uuid
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line([10, 0], %)
+  |> line(end = [10, 0])
   |> angledLine({ angle = 60, length = 10 }, %)
   |> angledLine({ angle = 120, length = 10 }, %)
-  |> line([-10, 0], %)
+  |> line(end = [-10, 0])
   |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
-  |> close(%)
+  |> close()
 
-example = extrude(5, exampleSketch)
+example = extrude(exampleSketch, length = 5)
   |> fillet({
        radius = 3,
        tags = [getOppositeEdge(referenceEdge)]

docs/kcl/getPreviousAdjacentEdge.md

@@ -29,14 +29,14 @@ getPreviousAdjacentEdge(tag: TagIdentifier) -> Uuid
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line([10, 0], %)
+  |> line(end = [10, 0])
   |> angledLine({ angle = 60, length = 10 }, %)
   |> angledLine({ angle = 120, length = 10 }, %)
-  |> line([-10, 0], %)
+  |> line(end = [-10, 0])
   |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
-  |> close(%)
+  |> close()
 
-example = extrude(5, exampleSketch)
+example = extrude(exampleSketch, length = 5)
   |> fillet({
        radius = 3,
        tags = [getPreviousAdjacentEdge(referenceEdge)]

docs/kcl/helix.md

@@ -49,7 +49,7 @@ springSketch = startSketchOn('YZ')
 // Create a helix around an edge.
 helper001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line([0, 10], %, $edge001)
+  |> line(end = [0, 10], tag = $edge001)
 
 helixPath = helix({
   angleStart = 0,

docs/kcl/helixRevolutions.md

@@ -30,7 +30,7 @@ helixRevolutions(data: HelixRevolutionsData, solid: Solid) -> Solid
 ```js
 part001 = startSketchOn('XY')
   |> circle({ center = [5, 5], radius = 10 }, %)
-  |> extrude(10, %)
+  |> extrude(length = 10)
   |> helixRevolutions({
        angleStart = 0,
        ccw = true,

docs/kcl/hollow.md

@@ -31,11 +31,11 @@ hollow(thickness: number, solid: Solid) -> Solid
 // Hollow a basic sketch.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line([24, 0], %)
-  |> line([0, -24], %)
-  |> line([-24, 0], %)
-  |> close(%)
-  |> extrude(6, %)
+  |> line(end = [24, 0])
+  |> line(end = [0, -24])
+  |> line(end = [-24, 0])
+  |> close()
+  |> extrude(length = 6)
   |> hollow(0.25, %)
 ```
 
@@ -45,11 +45,11 @@ firstSketch = startSketchOn('XY')
 // Hollow a basic sketch.
 firstSketch = startSketchOn('-XZ')
   |> startProfileAt([-12, 12], %)
-  |> line([24, 0], %)
-  |> line([0, -24], %)
-  |> line([-24, 0], %)
-  |> close(%)
-  |> extrude(6, %)
+  |> line(end = [24, 0])
+  |> line(end = [0, -24])
+  |> line(end = [-24, 0])
+  |> close()
+  |> extrude(length = 6)
   |> hollow(0.5, %)
 ```
 
@@ -60,25 +60,25 @@ firstSketch = startSketchOn('-XZ')
 size = 100
 case = startSketchOn('-XZ')
   |> startProfileAt([-size, -size], %)
-  |> line([2 * size, 0], %)
-  |> line([0, 2 * size], %)
+  |> line(end = [2 * size, 0])
+  |> line(end = [0, 2 * size])
   |> tangentialArcTo([-size, size], %)
-  |> close(%)
-  |> extrude(65, %)
+  |> close()
+  |> extrude(length = 65)
 
 thing1 = startSketchOn(case, 'end')
   |> circle({
        center = [-size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(50, %)
+  |> extrude(length = 50)
 
 thing2 = startSketchOn(case, 'end')
   |> circle({
        center = [size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(50, %)
+  |> extrude(length = 50)
 
 hollow(0.5, case)
 ```

docs/kcl/index.md

@@ -58,7 +58,6 @@ layout: manual
 * [`legAngY`](kcl/legAngY)
 * [`legLen`](kcl/legLen)
 * [`line`](kcl/line)
-* [`lineTo`](kcl/lineTo)
 * [`ln`](kcl/ln)
 * [`loft`](kcl/loft)
 * [`log`](kcl/log)

docs/kcl/int.md

@@ -38,7 +38,7 @@ assertEqual(n, 3, 0.0001, "5/2 = 2.5, rounded up makes 3")
 // Draw n cylinders.
 startSketchOn('XZ')
   |> circle({ center = [0, 0], radius = 2 }, %)
-  |> extrude(5, %)
+  |> extrude(length = 5)
   |> patternTransform(n, fn(id) {
     return { translate = [4 * id, 0, 0] }
   }, %)

docs/kcl/loft.md

@@ -34,18 +34,18 @@ loft(sketches: [Sketch], v_degree: NonZeroU32, bez_approximate_rational: bool, b
 // Loft a square and a triangle.
 squareSketch = startSketchOn('XY')
   |> startProfileAt([-100, 200], %)
-  |> line([200, 0], %)
-  |> line([0, -200], %)
-  |> line([-200, 0], %)
-  |> lineTo([profileStartX(%), profileStartY(%)], %)
-  |> close(%)
+  |> line(end = [200, 0])
+  |> line(end = [0, -200])
+  |> line(end = [-200, 0])
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
 
 triangleSketch = startSketchOn(offsetPlane('XY', 75))
   |> startProfileAt([0, 125], %)
-  |> line([-15, -30], %)
-  |> line([30, 0], %)
-  |> lineTo([profileStartX(%), profileStartY(%)], %)
-  |> close(%)
+  |> line(end = [-15, -30])
+  |> line(end = [30, 0])
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
 
 loft([squareSketch, triangleSketch])
 ```
@@ -56,11 +56,11 @@ loft([squareSketch, triangleSketch])
 // Loft a square, a circle, and another circle.
 squareSketch = startSketchOn('XY')
   |> startProfileAt([-100, 200], %)
-  |> line([200, 0], %)
-  |> line([0, -200], %)
-  |> line([-200, 0], %)
-  |> lineTo([profileStartX(%), profileStartY(%)], %)
-  |> close(%)
+  |> line(end = [200, 0])
+  |> line(end = [0, -200])
+  |> line(end = [-200, 0])
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
 
 circleSketch0 = startSketchOn(offsetPlane('XY', 75))
   |> circle({ center = [0, 100], radius = 50 }, %)
@@ -81,11 +81,11 @@ loft([
 // Loft a square, a circle, and another circle with options.
 squareSketch = startSketchOn('XY')
   |> startProfileAt([-100, 200], %)
-  |> line([200, 0], %)
-  |> line([0, -200], %)
-  |> line([-200, 0], %)
-  |> lineTo([profileStartX(%), profileStartY(%)], %)
-  |> close(%)
+  |> line(end = [200, 0])
+  |> line(end = [0, -200])
+  |> line(end = [-200, 0])
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
 
 circleSketch0 = startSketchOn(offsetPlane('XY', 75))
   |> circle({ center = [0, 100], radius = 50 }, %)

docs/kcl/patternCircular3d.md

@@ -31,7 +31,7 @@ patternCircular3d(data: CircularPattern3dData, solid_set: SolidSet) -> [Solid]
 exampleSketch = startSketchOn('XZ')
   |> circle({ center = [0, 0], radius = 1 }, %)
 
-example = extrude(-5, exampleSketch)
+example = extrude(exampleSketch, length = -5)
   |> patternCircular3d({
        axis = [1, -1, 0],
        center = [10, -20, 0],

docs/kcl/patternLinear3d.md

@@ -30,12 +30,12 @@ patternLinear3d(data: LinearPattern3dData, solid_set: SolidSet) -> [Solid]
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line([0, 2], %)
-  |> line([3, 1], %)
-  |> line([0, -4], %)
-  |> close(%)
+  |> line(end = [0, 2])
+  |> line(end = [3, 1])
+  |> line(end = [0, -4])
+  |> close()
 
-example = extrude(1, exampleSketch)
+example = extrude(exampleSketch, length = 1)
   |> patternLinear3d({
        axis = [1, 0, 1],
        instances = 7,

docs/kcl/patternTransform.md

@@ -63,7 +63,7 @@ fn transform(id) {
 // Sketch 4 cylinders.
 sketch001 = startSketchOn('XZ')
   |> circle({ center = [0, 0], radius = 2 }, %)
-  |> extrude(5, %)
+  |> extrude(length = 5)
   |> patternTransform(4, transform, %)
 ```
 
@@ -79,7 +79,7 @@ fn transform(id) {
 
 sketch001 = startSketchOn('XZ')
   |> circle({ center = [0, 0], radius = 2 }, %)
-  |> extrude(5, %)
+  |> extrude(length = 5)
   |> patternTransform(4, transform, %)
 ```
 
@@ -97,12 +97,12 @@ fn cube(length, center) {
 
   return startSketchOn('XY')
     |> startProfileAt(p0, %)
-    |> lineTo(p1, %)
-    |> lineTo(p2, %)
-    |> lineTo(p3, %)
-    |> lineTo(p0, %)
-    |> close(%)
-    |> extrude(length, %)
+    |> line(endAbsolute = p1)
+    |> line(endAbsolute = p2)
+    |> line(endAbsolute = p3)
+    |> line(endAbsolute = p0)
+    |> close()
+    |> extrude(length = length)
 }
 
 width = 20
@@ -135,12 +135,12 @@ fn cube(length, center) {
 
   return startSketchOn('XY')
     |> startProfileAt(p0, %)
-    |> lineTo(p1, %)
-    |> lineTo(p2, %)
-    |> lineTo(p3, %)
-    |> lineTo(p0, %)
-    |> close(%)
-    |> extrude(length, %)
+    |> line(endAbsolute = p1)
+    |> line(endAbsolute = p2)
+    |> line(endAbsolute = p3)
+    |> line(endAbsolute = p0)
+    |> close()
+    |> extrude(length = length)
 }
 
 width = 20
@@ -179,7 +179,7 @@ fn layer() {
   return startSketchOn("XY")
     // or some other plane idk
     |> circle({ center = [0, 0], radius = 1 }, %, $tag1)
-    |> extrude(h, %)
+    |> extrude(length = h)
 }
 // The vase is 100 layers tall.
 // The 100 layers are replica of each other, with a slight transformation applied to each.
@@ -205,7 +205,7 @@ startSketchOn('XY')
        center = [0, 0],
        inscribed = false
      }, %)
-  |> extrude(4, %)
+  |> extrude(length = 4)
   |> patternTransform(3, transform, %)
 ```
 

docs/kcl/segEnd.md

@@ -30,12 +30,12 @@ segEnd(tag: TagIdentifier) -> [number]
 w = 15
 cube = startSketchOn('XY')
   |> startProfileAt([0, 0], %)
-  |> line([w, 0], %, $line1)
-  |> line([0, w], %, $line2)
-  |> line([-w, 0], %, $line3)
-  |> line([0, -w], %, $line4)
-  |> close(%)
-  |> extrude(5, %)
+  |> line(end = [w, 0], tag = $line1)
+  |> line(end = [0, w], tag = $line2)
+  |> line(end = [-w, 0], tag = $line3)
+  |> line(end = [0, -w], tag = $line4)
+  |> close()
+  |> extrude(length = 5)
 
 fn cylinder(radius, tag) {
   return startSketchOn('XY')
@@ -44,7 +44,7 @@ fn cylinder(radius, tag) {
          radius = radius,
          center = segEnd(tag)
        }, %)
-    |> extrude(radius, %)
+    |> extrude(length = radius)
 }
 
 cylinder(1, line1)

docs/kcl/segStart.md

@@ -30,12 +30,12 @@ segStart(tag: TagIdentifier) -> [number]
 w = 15
 cube = startSketchOn('XY')
   |> startProfileAt([0, 0], %)
-  |> line([w, 0], %, $line1)
-  |> line([0, w], %, $line2)
-  |> line([-w, 0], %, $line3)
-  |> line([0, -w], %, $line4)
-  |> close(%)
-  |> extrude(5, %)
+  |> line(end = [w, 0], tag = $line1)
+  |> line(end = [0, w], tag = $line2)
+  |> line(end = [-w, 0], tag = $line3)
+  |> line(end = [0, -w], tag = $line4)
+  |> close()
+  |> extrude(length = 5)
 
 fn cylinder(radius, tag) {
   return startSketchOn('XY')
@@ -44,7 +44,7 @@ fn cylinder(radius, tag) {
          radius = radius,
          center = segStart(tag)
        }, %)
-    |> extrude(radius, %)
+    |> extrude(length = radius)
 }
 
 cylinder(1, line1)

docs/kcl/shell.md

@@ -31,11 +31,11 @@ shell(data: ShellData, solid_set: SolidSet) -> SolidSet
 // Remove the end face for the extrusion.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line([24, 0], %)
-  |> line([0, -24], %)
-  |> line([-24, 0], %)
-  |> close(%)
-  |> extrude(6, %)
+  |> line(end = [24, 0])
+  |> line(end = [0, -24])
+  |> line(end = [-24, 0])
+  |> close()
+  |> extrude(length = 6)
 
 // Remove the end face for the extrusion.
 shell({ faces = ['end'], thickness = 0.25 }, firstSketch)
@@ -47,11 +47,11 @@ shell({ faces = ['end'], thickness = 0.25 }, firstSketch)
 // Remove the start face for the extrusion.
 firstSketch = startSketchOn('-XZ')
   |> startProfileAt([-12, 12], %)
-  |> line([24, 0], %)
-  |> line([0, -24], %)
-  |> line([-24, 0], %)
-  |> close(%)
-  |> extrude(6, %)
+  |> line(end = [24, 0])
+  |> line(end = [0, -24])
+  |> line(end = [-24, 0])
+  |> close()
+  |> extrude(length = 6)
 
 // Remove the start face for the extrusion.
 shell({ faces = ['start'], thickness = 0.25 }, firstSketch)
@@ -63,11 +63,11 @@ shell({ faces = ['start'], thickness = 0.25 }, firstSketch)
 // Remove a tagged face and the end face for the extrusion.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line([24, 0], %)
-  |> line([0, -24], %)
-  |> line([-24, 0], %, $myTag)
-  |> close(%)
-  |> extrude(6, %)
+  |> line(end = [24, 0])
+  |> line(end = [0, -24])
+  |> line(end = [-24, 0], tag = $myTag)
+  |> close()
+  |> extrude(length = 6)
 
 // Remove a tagged face for the extrusion.
 shell({ faces = [myTag], thickness = 0.25 }, firstSketch)
@@ -79,11 +79,11 @@ shell({ faces = [myTag], thickness = 0.25 }, firstSketch)
 // Remove multiple faces at once.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line([24, 0], %)
-  |> line([0, -24], %)
-  |> line([-24, 0], %, $myTag)
-  |> close(%)
-  |> extrude(6, %)
+  |> line(end = [24, 0])
+  |> line(end = [0, -24])
+  |> line(end = [-24, 0], tag = $myTag)
+  |> close()
+  |> extrude(length = 6)
 
 // Remove a tagged face and the end face for the extrusion.
 shell({
@@ -99,25 +99,25 @@ shell({
 size = 100
 case = startSketchOn('-XZ')
   |> startProfileAt([-size, -size], %)
-  |> line([2 * size, 0], %)
-  |> line([0, 2 * size], %)
+  |> line(end = [2 * size, 0])
+  |> line(end = [0, 2 * size])
   |> tangentialArcTo([-size, size], %)
-  |> close(%)
-  |> extrude(65, %)
+  |> close()
+  |> extrude(length = 65)
 
 thing1 = startSketchOn(case, 'end')
   |> circle({
        center = [-size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(50, %)
+  |> extrude(length = 50)
 
 thing2 = startSketchOn(case, 'end')
   |> circle({
        center = [size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(50, %)
+  |> extrude(length = 50)
 
 // We put "case" in the shell function to shell the entire object.
 shell({ faces = ['start'], thickness = 5 }, case)
@@ -130,25 +130,25 @@ shell({ faces = ['start'], thickness = 5 }, case)
 size = 100
 case = startSketchOn('XY')
   |> startProfileAt([-size, -size], %)
-  |> line([2 * size, 0], %)
-  |> line([0, 2 * size], %)
+  |> line(end = [2 * size, 0])
+  |> line(end = [0, 2 * size])
   |> tangentialArcTo([-size, size], %)
-  |> close(%)
-  |> extrude(65, %)
+  |> close()
+  |> extrude(length = 65)
 
 thing1 = startSketchOn(case, 'end')
   |> circle({
        center = [-size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(50, %)
+  |> extrude(length = 50)
 
 thing2 = startSketchOn(case, 'end')
   |> circle({
        center = [size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(50, %)
+  |> extrude(length = 50)
 
 // We put "thing1" in the shell function to shell the end face of the object.
 shell({ faces = ['end'], thickness = 5 }, thing1)
@@ -164,25 +164,25 @@ shell({ faces = ['end'], thickness = 5 }, thing1)
 size = 100
 case = startSketchOn('XY')
   |> startProfileAt([-size, -size], %)
-  |> line([2 * size, 0], %)
-  |> line([0, 2 * size], %)
+  |> line(end = [2 * size, 0])
+  |> line(end = [0, 2 * size])
   |> tangentialArcTo([-size, size], %)
-  |> close(%)
-  |> extrude(65, %)
+  |> close()
+  |> extrude(length = 65)
 
 thing1 = startSketchOn(case, 'end')
   |> circle({
        center = [-size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(50, %)
+  |> extrude(length = 50)
 
 thing2 = startSketchOn(case, 'end')
   |> circle({
        center = [size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(50, %)
+  |> extrude(length = 50)
 
 // We put "thing1" and "thing2" in the shell function to shell the end face of the object.
 shell({ faces = ['end'], thickness = 5 }, [thing1, thing2])

docs/kcl/sweep.md

@@ -34,11 +34,11 @@ sweep(data: SweepData, sketch: Sketch) -> Solid
 // Create a path for the sweep.
 sweepPath = startSketchOn('XZ')
   |> startProfileAt([0.05, 0.05], %)
-  |> line([0, 7], %)
+  |> line(end = [0, 7])
   |> tangentialArc({ offset = 90, radius = 5 }, %)
-  |> line([-3, 0], %)
+  |> line(end = [-3, 0])
   |> tangentialArc({ offset = -90, radius = 5 }, %)
-  |> line([0, 7], %)
+  |> line(end = [0, 7])
 
 // Create a hole for the pipe.
 pipeHole = startSketchOn('XY')

e2e/playwright/basic-sketch.spec.ts

@@ -144,7 +144,7 @@ async function doBasicSketch(
   |> xLine(-segLen(seg01), %)`)
 }
 
-test.describe('Basic sketch', () => {
+test.describe('Basic sketch', { tag: ['@skipWin'] }, () => {
   test.fixme('code pane open at start', async ({ page, homePage }) => {
     await doBasicSketch(page, homePage, ['code'])
   })

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -4,112 +4,125 @@ import { getUtils } from './test-utils'
 import { EngineCommand } from 'lang/std/artifactGraph'
 import { uuidv4 } from 'lib/utils'
 
-test.describe('Can create sketches on all planes and their back sides', () => {
-  const sketchOnPlaneAndBackSideTest = async (
-    page: Page,
-    homePage: HomePageFixture,
-    plane: string,
-    clickCoords: { x: number; y: number }
-  ) => {
-    const u = await getUtils(page)
-    const PUR = 400 / 37.5 //pixeltoUnitRatio
-    await page.setBodyDimensions({ width: 1200, height: 500 })
+test.describe(
+  'Can create sketches on all planes and their back sides',
+  { tag: ['@skipWin'] },
+  () => {
+    const sketchOnPlaneAndBackSideTest = async (
+      page: Page,
+      homePage: HomePageFixture,
+      plane: string,
+      clickCoords: { x: number; y: number }
+    ) => {
+      const u = await getUtils(page)
+      const PUR = 400 / 37.5 //pixeltoUnitRatio
+      await page.setBodyDimensions({ width: 1200, height: 500 })
 
-    await homePage.goToModelingScene()
-    await u.openDebugPanel()
+      await homePage.goToModelingScene()
+      await u.openDebugPanel()
 
-    const coord =
-      plane === '-XY' || plane === '-YZ' || plane === 'XZ' ? -100 : 100
-    const camCommand: EngineCommand = {
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: {
-        type: 'default_camera_look_at',
-        center: { x: 0, y: 0, z: 0 },
-        vantage: { x: coord, y: coord, z: coord },
-        up: { x: 0, y: 0, z: 1 },
-      },
-    }
-    const updateCamCommand: EngineCommand = {
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: {
-        type: 'default_camera_get_settings',
-      },
-    }
+      const coord =
+        plane === '-XY' || plane === '-YZ' || plane === 'XZ' ? -100 : 100
+      const camCommand: EngineCommand = {
+        type: 'modeling_cmd_req',
+        cmd_id: uuidv4(),
+        cmd: {
+          type: 'default_camera_look_at',
+          center: { x: 0, y: 0, z: 0 },
+          vantage: { x: coord, y: coord, z: coord },
+          up: { x: 0, y: 0, z: 1 },
+        },
+      }
+      const updateCamCommand: EngineCommand = {
+        type: 'modeling_cmd_req',
+        cmd_id: uuidv4(),
+        cmd: {
+          type: 'default_camera_get_settings',
+        },
+      }
 
-    const code = `sketch001 = startSketchOn('${plane}')
+      const code = `sketch001 = startSketchOn('${plane}')
     |> startProfileAt([0.9, -1.22], %)`
 
-    await u.openDebugPanel()
+      await u.openDebugPanel()
 
-    await u.clearCommandLogs()
-    await page.getByRole('button', { name: 'Start Sketch' }).click()
+      await u.clearCommandLogs()
+      await page.getByRole('button', { name: 'Start Sketch' }).click()
 
-    await u.sendCustomCmd(camCommand)
-    await page.waitForTimeout(100)
-    await u.sendCustomCmd(updateCamCommand)
+      await u.sendCustomCmd(camCommand)
+      await page.waitForTimeout(100)
+      await u.sendCustomCmd(updateCamCommand)
 
-    await u.closeDebugPanel()
-    await page.mouse.click(clickCoords.x, clickCoords.y)
-    await page.waitForTimeout(300) // wait for animation
+      await u.closeDebugPanel()
+      await page.mouse.click(clickCoords.x, clickCoords.y)
+      await page.waitForTimeout(300) // wait for animation
 
-    await expect(
-      page.getByRole('button', { name: 'line Line', exact: true })
-    ).toBeVisible()
+      await expect(
+        page.getByRole('button', { name: 'line Line', exact: true })
+      ).toBeVisible()
 
-    // draw a line
-    const startXPx = 600
+      // draw a line
+      const startXPx = 600
 
-    await u.closeDebugPanel()
-    await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
+      await u.closeDebugPanel()
+      await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
 
-    await expect(page.locator('.cm-content')).toHaveText(code)
+      await expect(page.locator('.cm-content')).toHaveText(code)
 
-    await page
-      .getByRole('button', { name: 'line Line', exact: true })
-      .first()
-      .click()
-    await u.openAndClearDebugPanel()
-    await page.getByRole('button', { name: 'Exit Sketch' }).click()
-    await u.expectCmdLog('[data-message-type="execution-done"]')
+      await page
+        .getByRole('button', { name: 'line Line', exact: true })
+        .first()
+        .click()
+      await u.openAndClearDebugPanel()
+      await page.getByRole('button', { name: 'Exit Sketch' }).click()
+      await u.expectCmdLog('[data-message-type="execution-done"]')
 
-    await u.clearCommandLogs()
-    await u.removeCurrentCode()
+      await u.clearCommandLogs()
+      await u.removeCurrentCode()
+    }
+    test('XY', async ({ page, homePage }) => {
+      await sketchOnPlaneAndBackSideTest(
+        page,
+        homePage,
+        'XY',
+        { x: 600, y: 388 } // red plane
+        // { x: 600, y: 400 }, // red plane // clicks grid helper and that causes problems, should fix so that these coords work too.
+      )
+    })
+
+    test('YZ', async ({ page, homePage }) => {
+      await sketchOnPlaneAndBackSideTest(page, homePage, 'YZ', {
+        x: 700,
+        y: 250,
+      }) // green plane
+    })
+
+    test('XZ', async ({ page, homePage }) => {
+      await sketchOnPlaneAndBackSideTest(page, homePage, '-XZ', {
+        x: 700,
+        y: 80,
+      }) // blue plane
+    })
+
+    test('-XY', async ({ page, homePage }) => {
+      await sketchOnPlaneAndBackSideTest(page, homePage, '-XY', {
+        x: 600,
+        y: 118,
+      }) // back of red plane
+    })
+
+    test('-YZ', async ({ page, homePage }) => {
+      await sketchOnPlaneAndBackSideTest(page, homePage, '-YZ', {
+        x: 700,
+        y: 219,
+      }) // back of green plan
+    })
+
+    test('-XZ', async ({ page, homePage }) => {
+      await sketchOnPlaneAndBackSideTest(page, homePage, 'XZ', {
+        x: 700,
+        y: 427,
+      }) // back of blue plane
+    })
   }
-  test('XY', async ({ page, homePage }) => {
-    await sketchOnPlaneAndBackSideTest(
-      page,
-      homePage,
-      'XY',
-      { x: 600, y: 388 } // red plane
-      // { x: 600, y: 400 }, // red plane // clicks grid helper and that causes problems, should fix so that these coords work too.
-    )
-  })
-
-  test('YZ', async ({ page, homePage }) => {
-    await sketchOnPlaneAndBackSideTest(page, homePage, 'YZ', { x: 700, y: 250 }) // green plane
-  })
-
-  test('XZ', async ({ page, homePage }) => {
-    await sketchOnPlaneAndBackSideTest(page, homePage, '-XZ', { x: 700, y: 80 }) // blue plane
-  })
-
-  test('-XY', async ({ page, homePage }) => {
-    await sketchOnPlaneAndBackSideTest(page, homePage, '-XY', {
-      x: 600,
-      y: 118,
-    }) // back of red plane
-  })
-
-  test('-YZ', async ({ page, homePage }) => {
-    await sketchOnPlaneAndBackSideTest(page, homePage, '-YZ', {
-      x: 700,
-      y: 219,
-    }) // back of green plan
-  })
-
-  test('-XZ', async ({ page, homePage }) => {
-    await sketchOnPlaneAndBackSideTest(page, homePage, 'XZ', { x: 700, y: 427 }) // back of blue plane
-  })
-})
+)

e2e/playwright/code-pane-and-errors.spec.ts

@@ -6,7 +6,7 @@ import { bracket } from 'lib/exampleKcl'
 import { TEST_CODE_LONG_WITH_ERROR_OUT_OF_VIEW } from './storageStates'
 import fsp from 'fs/promises'
 
-test.describe('Code pane and errors', () => {
+test.describe('Code pane and errors', { tag: ['@skipWin'] }, () => {
   test('Typing KCL errors induces a badge on the code pane button', async ({
     page,
     homePage,
@@ -20,11 +20,11 @@ test.describe('Code pane and errors', () => {
         `// Extruded Triangle
   sketch001 = startSketchOn('XZ')
     |> startProfileAt([0, 0], %)
-    |> line([10, 0], %)
-    |> line([-5, 10], %)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)
-  extrude001 = extrude(5, sketch001)`
+    |> line(end = [10, 0])
+    |> line(end = [-5, 10])
+    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+    |> close()
+  extrude001 = extrude(sketch001, length = 5)`
       )
     })
 
@@ -79,8 +79,10 @@ test.describe('Code pane and errors', () => {
 
     // Delete a character to break the KCL
     await editor.openPane()
-    await editor.scrollToText('thickness, bracketLeg1Sketch)')
-    await page.getByText('extrude(thickness, bracketLeg1Sketch)').click()
+    await editor.scrollToText('bracketLeg1Sketch, length = thickness)')
+    await page
+      .getByText('extrude(bracketLeg1Sketch, length = thickness)')
+      .click()
     await page.keyboard.press('Backspace')
 
     // Ensure that a badge appears on the button
@@ -107,7 +109,7 @@ test.describe('Code pane and errors', () => {
     await editor.openPane()
 
     // Go to our problematic code again (missing closing paren!)
-    await editor.scrollToText('extrude(thickness, bracketLeg1Sketch')
+    await editor.scrollToText('extrude(bracketLeg1Sketch, length = thickness')
 
     // Ensure that a badge appears on the button
     await expect(codePaneButtonHolder).toContainText('notification')

e2e/playwright/command-bar-tests.spec.ts

@@ -4,7 +4,7 @@ import { executorInputPath, getUtils } from './test-utils'
 import { KCL_DEFAULT_LENGTH } from 'lib/constants'
 import path from 'path'
 
-test.describe('Command bar tests', () => {
+test.describe('Command bar tests', { tag: ['@skipWin'] }, () => {
   test('Extrude from command bar selects extrude line after', async ({
     page,
     homePage,
@@ -14,10 +14,10 @@ test.describe('Command bar tests', () => {
         'persistCode',
         `sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
+  |> line(end = [20, 0])
+  |> line(end = [0, 20])
   |> xLine(-20, %)
-  |> close(%)
+  |> close()
     `
       )
     })
@@ -32,7 +32,7 @@ test.describe('Command bar tests', () => {
     await u.closeDebugPanel()
 
     // Click the line of code for xLine.
-    await page.getByText(`close(%)`).click() // TODO remove this and reinstate // await topHorzSegmentClick()
+    await page.getByText(`close()`).click() // TODO remove this and reinstate // await topHorzSegmentClick()
     await page.waitForTimeout(100)
 
     await page.getByRole('button', { name: 'Extrude' }).click()
@@ -42,7 +42,47 @@ test.describe('Command bar tests', () => {
     await page.keyboard.press('Enter')
     await page.waitForTimeout(200)
     await expect(page.locator('.cm-activeLine')).toHaveText(
-      `extrude001 = extrude(${KCL_DEFAULT_LENGTH}, sketch001)`
+      `extrude001 = extrude(sketch001, length = ${KCL_DEFAULT_LENGTH})`
+    )
+  })
+
+  // TODO: fix this test after the electron migration
+  test.fixme('Fillet from command bar', async ({ page, homePage }) => {
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'persistCode',
+        `sketch001 = startSketchOn('XY')
+    |> startProfileAt([-5, -5], %)
+    |> line(end = [0, 10])
+    |> line(end = [10, 0])
+    |> line(end = [0, -10])
+    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+    |> close()
+  extrude001 = extrude(sketch001, length = -10)`
+      )
+    })
+
+    const u = await getUtils(page)
+    await page.setBodyDimensions({ width: 1000, height: 500 })
+    await homePage.goToModelingScene()
+    await u.openDebugPanel()
+    await u.expectCmdLog('[data-message-type="execution-done"]')
+    await u.closeDebugPanel()
+
+    const selectSegment = () => page.getByText(`line(end = [0, -10])`).click()
+
+    await selectSegment()
+    await page.waitForTimeout(100)
+    await page.getByRole('button', { name: 'Fillet' }).click()
+    await page.waitForTimeout(100)
+    await page.keyboard.press('Enter') // skip selection
+    await page.waitForTimeout(100)
+    await page.keyboard.press('Enter') // accept default radius
+    await page.waitForTimeout(100)
+    await page.keyboard.press('Enter') // submit
+    await page.waitForTimeout(100)
+    await expect(page.locator('.cm-activeLine')).toContainText(
+      `fillet({ radius = ${KCL_DEFAULT_LENGTH}, tags = [seg01] }, %)`
     )
   })
 
@@ -127,54 +167,54 @@ test.describe('Command bar tests', () => {
     await expect(commandLevelArgButton).toHaveText('level: project')
   })
 
-  test('Command bar keybinding works from code editor and can change a setting', async ({
-    page,
-    homePage,
-  }) => {
-    await page.setBodyDimensions({ width: 1200, height: 500 })
-    await homePage.goToModelingScene()
+  test(
+    'Command bar keybinding works from code editor and can change a setting',
+    { tag: ['@skipWin'] },
+    async ({ page, homePage }) => {
+      await page.setBodyDimensions({ width: 1200, height: 500 })
+      await homePage.goToModelingScene()
 
-    await expect(
-      page.getByRole('button', { name: 'Start Sketch' })
-    ).not.toBeDisabled()
+      await expect(
+        page.getByRole('button', { name: 'Start Sketch' })
+      ).not.toBeDisabled()
 
-    // Put the cursor in the code editor
-    await page.locator('.cm-content').click()
+      // Put the cursor in the code editor
+      await page.locator('.cm-content').click()
 
-    // Now try the same, but with the keyboard shortcut, check focus
-    await page.keyboard.press('ControlOrMeta+K')
+      // Now try the same, but with the keyboard shortcut, check focus
+      await page.keyboard.press('ControlOrMeta+K')
 
-    let cmdSearchBar = page.getByPlaceholder('Search commands')
-    await expect(cmdSearchBar).toBeVisible()
-    await expect(cmdSearchBar).toBeFocused()
+      let cmdSearchBar = page.getByPlaceholder('Search commands')
+      await expect(cmdSearchBar).toBeVisible()
+      await expect(cmdSearchBar).toBeFocused()
 
-    // Try typing in the command bar
-    await cmdSearchBar.fill('theme')
-    const themeOption = page.getByRole('option', {
-      name: 'Settings · app · theme',
-    })
-    await expect(themeOption).toBeVisible()
-    await themeOption.click()
-    const themeInput = page.getByPlaceholder('dark')
-    await expect(themeInput).toBeVisible()
-    await expect(themeInput).toBeFocused()
-    // Select dark theme
-    await page.keyboard.press('ArrowDown')
-    await page.keyboard.press('ArrowDown')
-    await page.keyboard.press('ArrowDown')
-    await expect(page.getByRole('option', { name: 'system' })).toHaveAttribute(
-      'data-headlessui-state',
-      'active'
-    )
-    await page.keyboard.press('Enter')
+      // Try typing in the command bar
+      await cmdSearchBar.fill('theme')
+      const themeOption = page.getByRole('option', {
+        name: 'Settings · app · theme',
+      })
+      await expect(themeOption).toBeVisible()
+      await themeOption.click()
+      const themeInput = page.getByPlaceholder('dark')
+      await expect(themeInput).toBeVisible()
+      await expect(themeInput).toBeFocused()
+      // Select dark theme
+      await page.keyboard.press('ArrowDown')
+      await page.keyboard.press('ArrowDown')
+      await page.keyboard.press('ArrowDown')
+      await expect(
+        page.getByRole('option', { name: 'system' })
+      ).toHaveAttribute('data-headlessui-state', 'active')
+      await page.keyboard.press('Enter')
 
-    // Check the toast appeared
-    await expect(
-      page.getByText(`Set theme to "system" as a user default`)
-    ).toBeVisible()
-    // Check that the theme changed
-    await expect(page.locator('body')).not.toHaveClass(`body-bg dark`)
-  })
+      // Check the toast appeared
+      await expect(
+        page.getByText(`Set theme to "system" as a user default`)
+      ).toBeVisible()
+      // Check that the theme changed
+      await expect(page.locator('body')).not.toHaveClass(`body-bg dark`)
+    }
+  )
 
   test('Can extrude from the command bar', async ({ page, homePage }) => {
     await page.addInitScript(async () => {
@@ -183,10 +223,10 @@ test.describe('Command bar tests', () => {
         `distance = sqrt(20)
     sketch001 = startSketchOn('XZ')
     |> startProfileAt([-6.95, 10.98], %)
-    |> line([25.1, 0.41], %)
-    |> line([0.73, -20.93], %)
-    |> line([-23.44, 0.52], %)
-    |> close(%)
+    |> line(end = [25.1, 0.41])
+    |> line(end = [0.73, -20.93])
+    |> line(end = [-23.44, 0.52])
+    |> close()
         `
       )
     })
@@ -251,7 +291,7 @@ test.describe('Command bar tests', () => {
     await u.waitForCmdReceive('extrude')
 
     await expect(page.locator('.cm-content')).toContainText(
-      'extrude001 = extrude(distance001, sketch001)'
+      'extrude001 = extrude(sketch001, length = distance001)'
     )
   })
 

e2e/playwright/copilot-ghost-test.spec.ts

@@ -20,7 +20,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
     await expect(page.locator('.cm-ghostText').first()).toBeVisible()
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
     await expect(page.locator('.cm-ghostText').first()).toHaveText(
       `fn cube = (pos, scale) => {`
@@ -29,7 +29,7 @@ test.describe('Copilot ghost text', () => {
     // We should be able to hit Tab to accept the completion.
     await page.keyboard.press('Tab')
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
 
     // Hit enter a few times.
@@ -37,7 +37,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
 
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)    `
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)    `
     )
 
     await expect(page.locator('.cm-ghostText')).not.toBeVisible()
@@ -80,7 +80,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
 
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
     await expect(page.locator('.cm-ghostText').first()).toHaveText(
       `fn cube = (pos, scale) => {`
@@ -89,7 +89,7 @@ test.describe('Copilot ghost text', () => {
     // We should be able to hit Tab to accept the completion.
     await page.keyboard.press('Tab')
     await expect(page.locator('.cm-content')).toContainText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
   })
 
@@ -156,7 +156,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
 
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn('XZ')fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `sketch001 = startSketchOn('XZ')fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
     await expect(page.locator('.cm-ghostText').first()).toHaveText(
       `fn cube = (pos, scale) => {`
@@ -165,7 +165,7 @@ test.describe('Copilot ghost text', () => {
     // We should be able to hit Tab to accept the completion.
     await page.keyboard.press('Tab')
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn('XZ')fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `sketch001 = startSketchOn('XZ')fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
 
     // Hit enter a few times.
@@ -173,7 +173,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
 
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn('XZ')fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)    `
+      `sketch001 = startSketchOn('XZ')fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)    `
     )
 
     await expect(page.locator('.cm-ghostText')).not.toBeVisible()
@@ -194,7 +194,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
     await expect(page.locator('.cm-ghostText').first()).toBeVisible()
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
     await expect(page.locator('.cm-ghostText').first()).toHaveText(
       `fn cube = (pos, scale) => {`
@@ -225,7 +225,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
     await expect(page.locator('.cm-ghostText').first()).toBeVisible()
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
     await expect(page.locator('.cm-ghostText').first()).toHaveText(
       `fn cube = (pos, scale) => {`
@@ -256,7 +256,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
     await expect(page.locator('.cm-ghostText').first()).toBeVisible()
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
     await expect(page.locator('.cm-ghostText').first()).toHaveText(
       `fn cube = (pos, scale) => {`
@@ -287,7 +287,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
     await expect(page.locator('.cm-ghostText').first()).toBeVisible()
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
     await expect(page.locator('.cm-ghostText').first()).toHaveText(
       `fn cube = (pos, scale) => {`
@@ -315,7 +315,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
     await expect(page.locator('.cm-ghostText').first()).toBeVisible()
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
     await expect(page.locator('.cm-ghostText').first()).toHaveText(
       `fn cube = (pos, scale) => {`
@@ -326,7 +326,7 @@ test.describe('Copilot ghost text', () => {
     await expect(page.locator('.cm-ghostText').first()).toBeVisible()
 
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
   })
 
@@ -348,7 +348,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
     await expect(page.locator('.cm-ghostText').first()).toBeVisible()
     await expect(page.locator('.cm-content')).toHaveText(
-      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
     await expect(page.locator('.cm-ghostText').first()).toHaveText(
       `fn cube = (pos, scale) => {`
@@ -409,7 +409,7 @@ test.describe('Copilot ghost text', () => {
     await page.keyboard.press('Enter')
     await expect(page.locator('.cm-ghostText').first()).toBeVisible()
     await expect(page.locator('.cm-content')).toHaveText(
-      `{thing: "blah"}fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+      `{thing: "blah"}fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
     )
     await expect(page.locator('.cm-ghostText').first()).toHaveText(
       `fn cube = (pos, scale) => {`
@@ -450,7 +450,7 @@ test.describe('Copilot ghost text', () => {
       await page.keyboard.press('Enter')
       await expect(page.locator('.cm-ghostText').first()).toBeVisible()
       await expect(page.locator('.cm-content')).toHaveText(
-        `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+        `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
       )
       await expect(page.locator('.cm-ghostText').first()).toHaveText(
         `fn cube = (pos, scale) => {`
@@ -483,7 +483,7 @@ test.describe('Copilot ghost text', () => {
       await page.keyboard.press('Enter')
       await expect(page.locator('.cm-ghostText').first()).toBeVisible()
       await expect(page.locator('.cm-content')).toHaveText(
-        `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+        `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
       )
       await expect(page.locator('.cm-ghostText').first()).toHaveText(
         `fn cube = (pos, scale) => {`
@@ -514,7 +514,7 @@ test.describe('Copilot ghost text', () => {
       await page.keyboard.press('Enter')
       await expect(page.locator('.cm-ghostText').first()).toBeVisible()
       await expect(page.locator('.cm-content')).toHaveText(
-        `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line([0, scale], %)    |> line([scale, 0], %)    |> line([0, -scale], %)  return sg}part001 = cube([0,0], 20)    |> close(%)    |> extrude(20, %)`
+        `fn cube = (pos, scale) => {  sg = startSketchOn('XY')    |> startProfileAt(pos, %)    |> line(end = [0, scale], %)    |> line(end = [scale, 0])    |> line(end = [0, -scale])  return sg}part001 = cube([0,0], 20)    |> close()    |> extrude(length = 20)`
       )
       await expect(page.locator('.cm-ghostText').first()).toHaveText(
         `fn cube = (pos, scale) => {`

e2e/playwright/debug-pane.spec.ts

@@ -20,7 +20,7 @@ test.describe('Debug pane', () => {
   }) => {
     const code = `sketch001 = startSketchOn('XZ')
     |> startProfileAt([0, 0], %)
-  |> line([1, 1], %)
+  |> line(end = [1, 1])
   `
     const u = await getUtils(page)
     await page.setBodyDimensions({ width: 1200, height: 500 })
@@ -61,7 +61,7 @@ test.describe('Debug pane', () => {
       }
     })
     await test.step('Enter a comment', async () => {
-      await page.keyboard.type('|> line([2, 2], %)', { delay: 0 })
+      await page.keyboard.type('|> line(end = [2, 2])', { delay: 0 })
       // Wait for keyboard input debounce and updated artifact graph.
       await page.waitForTimeout(1000)
     })

e2e/playwright/editor-tests.spec.ts

@@ -10,7 +10,7 @@ import {
 
 import { join } from 'path'
 
-test.describe('Editor tests', () => {
+test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
   test('can comment out code with ctrl+/', async ({ page, homePage }) => {
     const u = await getUtils(page)
     await page.setBodyDimensions({ width: 1000, height: 500 })
@@ -23,10 +23,10 @@ test.describe('Editor tests', () => {
     await u.codeLocator.click()
     await page.keyboard.type(`sketch001 = startSketchOn('XY')
     |> startProfileAt([-10, -10], %)
-    |> line([20, 0], %)
-    |> line([0, 20], %)
-    |> line([-20, 0], %)
-    |> close(%)`)
+    |> line(end = [20, 0])
+    |> line(end = [0, 20])
+    |> line(end = [-20, 0])
+    |> close()`)
 
     await page.keyboard.down('ControlOrMeta')
     await page.keyboard.press('/')
@@ -35,10 +35,10 @@ test.describe('Editor tests', () => {
     await expect(page.locator('.cm-content'))
       .toHaveText(`sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  // |> close(%)`)
+  |> line(end = [20, 0])
+  |> line(end = [0, 20])
+  |> line(end = [-20, 0])
+  // |> close()`)
 
     // uncomment the code
     await page.keyboard.down('ControlOrMeta')
@@ -48,10 +48,10 @@ test.describe('Editor tests', () => {
     await expect(page.locator('.cm-content'))
       .toHaveText(`sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  |> close(%)`)
+  |> line(end = [20, 0])
+  |> line(end = [0, 20])
+  |> line(end = [-20, 0])
+  |> close()`)
   })
 
   test('ensure we use the cache, and do not re-execute', async ({
@@ -67,10 +67,10 @@ test.describe('Editor tests', () => {
     await u.codeLocator.click()
     await page.keyboard.type(`sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  |> close(%)`)
+  |> line(end = [20, 0])
+  |> line(end = [0, 20])
+  |> line(end = [-20, 0])
+  |> close()`)
 
     // Ensure we execute the first time.
     await u.openDebugPanel()
@@ -116,10 +116,10 @@ test.describe('Editor tests', () => {
     await u.codeLocator.click()
     await page.keyboard.type(`sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  |> close(%)`)
+  |> line(end = [20, 0])
+  |> line(end = [0, 20])
+  |> line(end = [-20, 0])
+  |> close()`)
 
     // Ensure we execute the first time.
     await u.openDebugPanel()
@@ -171,20 +171,20 @@ test.describe('Editor tests', () => {
     await u.codeLocator.click()
     await page.keyboard.type(`sketch001 = startSketchOn('XY')
     |> startProfileAt([-10, -10], %)
-    |> line([20, 0], %)
-    |> line([0, 20], %)
-    |> line([-20, 0], %)
-    |> close(%)`)
+    |> line(end = [20, 0])
+    |> line(end = [0, 20])
+    |> line(end = [-20, 0])
+    |> close()`)
     await page.locator('#code-pane button:first-child').click()
     await page.locator('button:has-text("Format code")').click()
 
     await expect(page.locator('.cm-content'))
       .toHaveText(`sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  |> close(%)`)
+  |> line(end = [20, 0])
+  |> line(end = [0, 20])
+  |> line(end = [-20, 0])
+  |> close()`)
   })
 
   test('if you click the format button it formats your code and executes so lints are still there', async ({
@@ -202,10 +202,10 @@ test.describe('Editor tests', () => {
     await u.codeLocator.click()
     await page.keyboard.type(`sketch_001 = startSketchOn('XY')
     |> startProfileAt([-10, -10], %)
-    |> line([20, 0], %)
-    |> line([0, 20], %)
-    |> line([-20, 0], %)
-    |> close(%)`)
+    |> line(end = [20, 0])
+    |> line(end = [0, 20])
+    |> line(end = [-20, 0])
+    |> close()`)
 
     await u.openDebugPanel()
     await u.expectCmdLog('[data-message-type="execution-done"]')
@@ -230,10 +230,10 @@ test.describe('Editor tests', () => {
     await expect(page.locator('.cm-content'))
       .toHaveText(`sketch_001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  |> close(%)`)
+  |> line(end = [20, 0])
+  |> line(end = [0, 20])
+  |> line(end = [-20, 0])
+  |> close()`)
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-info').first()).toBeVisible()
@@ -248,19 +248,19 @@ test.describe('Editor tests', () => {
   test('fold gutters work', async ({ page, homePage }) => {
     const fullCode = `sketch001 = startSketchOn('XY')
    |> startProfileAt([-10, -10], %)
-   |> line([20, 0], %)
-   |> line([0, 20], %)
-   |> line([-20, 0], %)
-   |> close(%)`
+   |> line(end = [20, 0])
+   |> line(end = [0, 20])
+   |> line(end = [-20, 0])
+   |> close()`
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
         `sketch001 = startSketchOn('XY')
    |> startProfileAt([-10, -10], %)
-   |> line([20, 0], %)
-   |> line([0, 20], %)
-   |> line([-20, 0], %)
-   |> close(%)`
+   |> line(end = [20, 0])
+   |> line(end = [0, 20])
+   |> line(end = [-20, 0])
+   |> close()`
       )
     })
     await page.setBodyDimensions({ width: 1000, height: 500 })
@@ -326,10 +326,10 @@ test.describe('Editor tests', () => {
         'persistCode',
         `sketch001 = startSketchOn('XY')
     |> startProfileAt([-10, -10], %)
-    |> line([20, 0], %)
-    |> line([0, 20], %)
-    |> line([-20, 0], %)
-    |> close(%)`
+    |> line(end = [20, 0])
+    |> line(end = [0, 20])
+    |> line(end = [-20, 0])
+    |> close()`
       )
     })
     await page.setBodyDimensions({ width: 1000, height: 500 })
@@ -358,7 +358,9 @@ test.describe('Editor tests', () => {
     // Hover over the line function
     await page.getByText('line').first().hover()
     await expect(page.locator('.hover-tooltip')).toBeVisible()
-    await expect(page.getByText('Draw a line')).toBeVisible()
+    await expect(
+      page.getByText('Extend the current sketch with a new straight line.')
+    ).toBeVisible()
   })
 
   test('if you use the format keyboard binding it formats your code', async ({
@@ -371,10 +373,10 @@ test.describe('Editor tests', () => {
         'persistCode',
         `sketch001 = startSketchOn('XY')
     |> startProfileAt([-10, -10], %)
-    |> line([20, 0], %)
-    |> line([0, 20], %)
-    |> line([-20, 0], %)
-    |> close(%)`
+    |> line(end = [20, 0])
+    |> line(end = [0, 20])
+    |> line(end = [-20, 0])
+    |> close()`
       )
       localStorage.setItem('disableAxis', 'true')
     })
@@ -398,10 +400,10 @@ test.describe('Editor tests', () => {
     await expect(page.locator('.cm-content'))
       .toHaveText(`sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  |> close(%)`)
+  |> line(end = [20, 0])
+  |> line(end = [0, 20])
+  |> line(end = [-20, 0])
+  |> close()`)
   })
 
   test('if you use the format keyboard binding it formats your code and executes so lints are shown', async ({
@@ -414,10 +416,10 @@ test.describe('Editor tests', () => {
         'persistCode',
         `sketch_001 = startSketchOn('XY')
     |> startProfileAt([-10, -10], %)
-    |> line([20, 0], %)
-    |> line([0, 20], %)
-    |> line([-20, 0], %)
-    |> close(%)`
+    |> line(end = [20, 0])
+    |> line(end = [0, 20])
+    |> line(end = [-20, 0])
+    |> close()`
       )
       localStorage.setItem('disableAxis', 'true')
     })
@@ -451,10 +453,10 @@ test.describe('Editor tests', () => {
     await expect(page.locator('.cm-content'))
       .toHaveText(`sketch_001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  |> close(%)`)
+  |> line(end = [20, 0])
+  |> line(end = [0, 20])
+  |> line(end = [-20, 0])
+  |> close()`)
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-info').first()).toBeVisible()
@@ -519,9 +521,9 @@ test.describe('Editor tests', () => {
         'persistCode',
         `sketch001 = startSketchOn('XZ')
     |> startProfileAt([3.29, 7.86], %)
-    |> line([2.48, 2.44], %)
-    |> line([2.66, 1.17], %)
-    |> close(%)
+    |> line(end = [2.48, 2.44])
+    |> line(end = [2.66, 1.17])
+    |> close()
     `
       )
     })
@@ -535,7 +537,7 @@ test.describe('Editor tests', () => {
 
     await u.codeLocator.click()
 
-    await page.getByText(' |> line([2.48, 2.44], %)').click()
+    await page.getByText(' |> line(end = [2.48, 2.44])').click()
 
     await expect(
       page.locator('.cm-lint-marker-error').first()
@@ -643,10 +645,10 @@ test.describe('Editor tests', () => {
     fn squareHole = (l, w) => {
   squareHoleSketch = startSketchOn('XY')
   |> startProfileAt([-width / 2, -length / 2], %)
-  |> lineTo([width / 2, -length / 2], %)
-  |> lineTo([width / 2, length / 2], %)
-  |> lineTo([-width / 2, length / 2], %)
-  |> close(%)
+  |> line(endAbsolute = [width / 2, -length / 2])
+  |> line(endAbsolute = [width / 2, length / 2])
+  |> line(endAbsolute = [-width / 2, length / 2])
+  |> close()
   return squareHoleSketch
     }
     `
@@ -684,7 +686,7 @@ test.describe('Editor tests', () => {
       await page.keyboard.type(`extrusion = startSketchOn('XY')
   |> circle({ center: [0, 0], radius: dia/2 }, %)
     |> hole(squareHole(length, width, height), %)
-    |> extrude(height, %)`)
+    |> extrude(length = height)`)
 
       // error in gutter
       await expect(page.locator('.cm-lint-marker-error').first()).toBeVisible()
@@ -707,18 +709,18 @@ test.describe('Editor tests', () => {
         'persistCode',
         `box = startSketchOn('XY')
     |> startProfileAt([0, 0], %)
-    |> line([0, 10], %)
-    |> line([10, 0], %)
-    |> line([0, -10], %, $revolveAxis)
-    |> close(%)
-    |> extrude(10, %)
+    |> line(end = [0, 10])
+    |> line(end = [10, 0])
+    |> line(end = [0, -10], tag = $revolveAxis)
+    |> close()
+    |> extrude(length = 10)
   
     sketch001 = startSketchOn(box, revolveAxis)
     |> startProfileAt([5, 10], %)
-    |> line([0, -10], %)
-    |> line([2, 0], %)
-    |> line([0, -10], %)
-    |> close(%)
+    |> line(end = [0, -10])
+    |> line(end = [2, 0])
+    |> line(end = [0, -10])
+    |> close()
     |> revolve({
     axis: revolveAxis,
     angle: 90
@@ -789,8 +791,7 @@ test.describe('Editor tests', () => {
 
       await expect(page.locator('.cm-tooltip-autocomplete')).toBeVisible()
       await page.waitForTimeout(100)
-      // press arrow down twice then enter to accept xLine
-      await page.keyboard.press('ArrowDown')
+      // press arrow down then enter to accept xLine
       await page.keyboard.press('ArrowDown')
       await page.keyboard.press('Enter')
       // finish line with comment
@@ -863,8 +864,7 @@ test.describe('Editor tests', () => {
 
       await expect(page.locator('.cm-tooltip-autocomplete')).toBeVisible()
       await page.waitForTimeout(100)
-      // press arrow down twice then tab to accept xLine
-      await page.keyboard.press('ArrowDown')
+      // press arrow down then tab to accept xLine
       await page.keyboard.press('ArrowDown')
       await page.keyboard.press('Tab')
       // finish line with comment
@@ -899,9 +899,9 @@ test.describe('Editor tests', () => {
         'persistCode',
         `sketch001 = startSketchOn('XZ')
   |> startProfileAt([4.61, -14.01], %)
-  |> line([12.73, -0.09], %)
+  |> line(end = [12.73, -0.09])
   |> tangentialArcTo([24.95, -5.38], %)
-  |> close(%)`
+  |> close()`
       )
     })
 
@@ -949,7 +949,7 @@ test.describe('Editor tests', () => {
 
     // expect the code to have changed
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn('XZ')  |> startProfileAt([4.61, -14.01], %)  |> line([12.73, -0.09], %)  |> tangentialArcTo([24.95, -5.38], %)  |> close(%)extrude001 = extrude(5, sketch001)`
+      `sketch001 = startSketchOn('XZ')  |> startProfileAt([4.61, -14.01], %)  |> line(end = [12.73, -0.09])  |> tangentialArcTo([24.95, -5.38], %)  |> close()extrude001 = extrude(sketch001, length = 5)`
     )
 
     // Now hit undo
@@ -961,159 +961,160 @@ test.describe('Editor tests', () => {
     await expect(page.locator('.cm-content'))
       .toHaveText(`sketch001 = startSketchOn('XZ')
   |> startProfileAt([4.61, -14.01], %)
-  |> line([12.73, -0.09], %)
+  |> line(end = [12.73, -0.09])
   |> tangentialArcTo([24.95, -5.38], %)
-  |> close(%)`)
+  |> close()`)
   })
 
-  test('Can undo a sketch modification with ctrl+z', async ({
-    page,
-    homePage,
-  }) => {
-    const u = await getUtils(page)
-    await page.addInitScript(async () => {
-      localStorage.setItem(
-        'persistCode',
-        `sketch001 = startSketchOn('XZ')
+  test(
+    'Can undo a sketch modification with ctrl+z',
+    { tag: ['@skipWin'] },
+    async ({ page, homePage }) => {
+      const u = await getUtils(page)
+      await page.addInitScript(async () => {
+        localStorage.setItem(
+          'persistCode',
+          `sketch001 = startSketchOn('XZ')
   |> startProfileAt([4.61, -10.01], %)
-  |> line([12.73, -0.09], %)
+  |> line(end = [12.73, -0.09])
   |> tangentialArcTo([24.95, -0.38], %)
-  |> close(%)
-  |> extrude(5, %)`
-      )
-    })
+  |> close()
+  |> extrude(length = 5)`
+        )
+      })
 
-    await page.setBodyDimensions({ width: 1200, height: 500 })
+      await page.setBodyDimensions({ width: 1200, height: 500 })
 
-    await homePage.goToModelingScene()
-    await expect(
-      page.getByRole('button', { name: 'Start Sketch' })
-    ).not.toBeDisabled()
+      await homePage.goToModelingScene()
+      await expect(
+        page.getByRole('button', { name: 'Start Sketch' })
+      ).not.toBeDisabled()
 
-    await page.waitForTimeout(100)
-    await u.openAndClearDebugPanel()
-    await u.sendCustomCmd({
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: {
-        type: 'default_camera_look_at',
-        vantage: { x: 0, y: -1250, z: 580 },
-        center: { x: 0, y: 0, z: 0 },
-        up: { x: 0, y: 0, z: 1 },
-      },
-    })
-    await page.waitForTimeout(100)
-    await u.sendCustomCmd({
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: {
-        type: 'default_camera_get_settings',
-      },
-    })
-    await page.waitForTimeout(100)
+      await page.waitForTimeout(100)
+      await u.openAndClearDebugPanel()
+      await u.sendCustomCmd({
+        type: 'modeling_cmd_req',
+        cmd_id: uuidv4(),
+        cmd: {
+          type: 'default_camera_look_at',
+          vantage: { x: 0, y: -1250, z: 580 },
+          center: { x: 0, y: 0, z: 0 },
+          up: { x: 0, y: 0, z: 1 },
+        },
+      })
+      await page.waitForTimeout(100)
+      await u.sendCustomCmd({
+        type: 'modeling_cmd_req',
+        cmd_id: uuidv4(),
+        cmd: {
+          type: 'default_camera_get_settings',
+        },
+      })
+      await page.waitForTimeout(100)
 
-    const startPX = [1200 / 2, 500 / 2]
+      const startPX = [1200 / 2, 500 / 2]
 
-    const dragPX = 40
+      const dragPX = 40
 
-    await page.getByText('startProfileAt([4.61, -10.01], %)').click()
-    await expect(
-      page.getByRole('button', { name: 'Edit Sketch' })
-    ).toBeVisible()
-    await page.getByRole('button', { name: 'Edit Sketch' }).click()
-    await page.waitForTimeout(400)
-    let prevContent = await page.locator('.cm-content').innerText()
+      await page.getByText('startProfileAt([4.61, -10.01], %)').click()
+      await expect(
+        page.getByRole('button', { name: 'Edit Sketch' })
+      ).toBeVisible()
+      await page.getByRole('button', { name: 'Edit Sketch' }).click()
+      await page.waitForTimeout(400)
+      let prevContent = await page.locator('.cm-content').innerText()
 
-    await expect(page.getByTestId('segment-overlay')).toHaveCount(2)
+      await expect(page.getByTestId('segment-overlay')).toHaveCount(2)
 
-    // drag startProfileAt handle
-    await page.dragAndDrop('#stream', '#stream', {
-      sourcePosition: { x: startPX[0] + 68, y: startPX[1] + 147 },
-      targetPosition: { x: startPX[0] + dragPX, y: startPX[1] + dragPX },
-    })
-    await page.waitForTimeout(100)
-    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
-    prevContent = await page.locator('.cm-content').innerText()
+      // drag startProfileAt handle
+      await page.dragAndDrop('#stream', '#stream', {
+        sourcePosition: { x: startPX[0] + 68, y: startPX[1] + 147 },
+        targetPosition: { x: startPX[0] + dragPX, y: startPX[1] + dragPX },
+      })
+      await page.waitForTimeout(100)
+      await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+      prevContent = await page.locator('.cm-content').innerText()
 
-    // drag line handle
-    // we wait so it saves the code
-    await page.waitForTimeout(800)
+      // drag line handle
+      // we wait so it saves the code
+      await page.waitForTimeout(800)
 
-    const lineEnd = await u.getBoundingBox('[data-overlay-index="0"]')
-    await page.waitForTimeout(100)
-    await page.dragAndDrop('#stream', '#stream', {
-      sourcePosition: { x: lineEnd.x - 5, y: lineEnd.y },
-      targetPosition: { x: lineEnd.x + dragPX, y: lineEnd.y + dragPX },
-    })
-    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
-    prevContent = await page.locator('.cm-content').innerText()
+      const lineEnd = await u.getBoundingBox('[data-overlay-index="0"]')
+      await page.waitForTimeout(100)
+      await page.dragAndDrop('#stream', '#stream', {
+        sourcePosition: { x: lineEnd.x - 5, y: lineEnd.y },
+        targetPosition: { x: lineEnd.x + dragPX, y: lineEnd.y + dragPX },
+      })
+      await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+      prevContent = await page.locator('.cm-content').innerText()
 
-    // we wait so it saves the code
-    await page.waitForTimeout(800)
+      // we wait so it saves the code
+      await page.waitForTimeout(800)
 
-    // drag tangentialArcTo handle
-    const tangentEnd = await u.getBoundingBox('[data-overlay-index="1"]')
-    await page.dragAndDrop('#stream', '#stream', {
-      sourcePosition: { x: tangentEnd.x + 10, y: tangentEnd.y - 5 },
-      targetPosition: {
-        x: tangentEnd.x + dragPX,
-        y: tangentEnd.y + dragPX,
-      },
-    })
-    await page.waitForTimeout(100)
-    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+      // drag tangentialArcTo handle
+      const tangentEnd = await u.getBoundingBox('[data-overlay-index="1"]')
+      await page.dragAndDrop('#stream', '#stream', {
+        sourcePosition: { x: tangentEnd.x + 10, y: tangentEnd.y - 5 },
+        targetPosition: {
+          x: tangentEnd.x + dragPX,
+          y: tangentEnd.y + dragPX,
+        },
+      })
+      await page.waitForTimeout(100)
+      await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
 
-    // expect the code to have changed
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
+      // expect the code to have changed
+      await expect(page.locator('.cm-content'))
+        .toHaveText(`sketch001 = startSketchOn('XZ')
     |> startProfileAt([2.71, -2.71], %)
-    |> line([15.4, -2.78], %)
+    |> line(end = [15.4, -2.78])
     |> tangentialArcTo([27.6, -3.05], %)
-    |> close(%)
-    |> extrude(5, %)
+    |> close()
+    |> extrude(length = 5)
   `)
 
-    // Hit undo
-    await page.keyboard.down('Control')
-    await page.keyboard.press('KeyZ')
-    await page.keyboard.up('Control')
+      // Hit undo
+      await page.keyboard.down('Control')
+      await page.keyboard.press('KeyZ')
+      await page.keyboard.up('Control')
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
+      await expect(page.locator('.cm-content'))
+        .toHaveText(`sketch001 = startSketchOn('XZ')
     |> startProfileAt([2.71, -2.71], %)
-    |> line([15.4, -2.78], %)
+    |> line(end = [15.4, -2.78])
     |> tangentialArcTo([24.95, -0.38], %)
-    |> close(%)
-    |> extrude(5, %)`)
+    |> close()
+    |> extrude(length = 5)`)
 
-    // Hit undo again.
-    await page.keyboard.down('Control')
-    await page.keyboard.press('KeyZ')
-    await page.keyboard.up('Control')
+      // Hit undo again.
+      await page.keyboard.down('Control')
+      await page.keyboard.press('KeyZ')
+      await page.keyboard.up('Control')
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
+      await expect(page.locator('.cm-content'))
+        .toHaveText(`sketch001 = startSketchOn('XZ')
     |> startProfileAt([2.71, -2.71], %)
-    |> line([12.73, -0.09], %)
+    |> line(end = [12.73, -0.09])
     |> tangentialArcTo([24.95, -0.38], %)
-    |> close(%)
-    |> extrude(5, %)
+    |> close()
+    |> extrude(length = 5)
   `)
 
-    // Hit undo again.
-    await page.keyboard.down('Control')
-    await page.keyboard.press('KeyZ')
-    await page.keyboard.up('Control')
+      // Hit undo again.
+      await page.keyboard.down('Control')
+      await page.keyboard.press('KeyZ')
+      await page.keyboard.up('Control')
 
-    await page.waitForTimeout(100)
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
+      await page.waitForTimeout(100)
+      await expect(page.locator('.cm-content'))
+        .toHaveText(`sketch001 = startSketchOn('XZ')
   |> startProfileAt([4.61, -10.01], %)
-  |> line([12.73, -0.09], %)
+  |> line(end = [12.73, -0.09])
   |> tangentialArcTo([24.95, -0.38], %)
-  |> close(%)
-  |> extrude(5, %)`)
-  })
+  |> close()
+  |> extrude(length = 5)`)
+    }
+  )
 
   test.fixme(
     `Can use the import stdlib function on a local OBJ file`,