Cut release v0.22.0 (#2582)

* perpendicular distance constraint

* remove constraints fix

e2e/playwright/flow-tests.spec.ts

@@ -1,7 +1,7 @@
 import { test, expect, Page } from '@playwright/test'
 import { makeTemplate, getUtils, doExport } from './test-utils'
 import waitOn from 'wait-on'
-import { roundOff, uuidv4 } from 'lib/utils'
+import { XOR, roundOff, uuidv4 } from 'lib/utils'
 import { SaveSettingsPayload } from 'lib/settings/settingsTypes'
 import { secrets } from './secrets'
 import {
@@ -2440,6 +2440,245 @@ test('Extrude from command bar selects extrude line after', async ({
 })
 
 test.describe('Testing constraints', () => {
+  test(`Test remove constraints`, async ({ page }) => {
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'persistCode',
+        `const yo = 79
+const part001 = startSketchOn('XZ')
+  |> startProfileAt([-7.54, -26.74], %)
+  |> line([74.36, 130.4], %, 'seg01')
+  |> line([78.92, -120.11], %)
+  |> angledLine([segAng('seg01', %), yo], %)
+  |> line([41.19, 28.97 + 5], %)
+const part002 = startSketchOn('XZ')
+  |> startProfileAt([299.05, 231.45], %)
+  |> xLine(-425.34, %, 'seg-what')
+  |> yLine(-264.06, %)
+  |> xLine(segLen('seg-what', %), %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)`
+      )
+    })
+    const u = await getUtils(page)
+    await page.setViewportSize({ width: 1200, height: 500 })
+    await page.goto('/')
+    await u.waitForAuthSkipAppStart()
+
+    await page.getByText("line([74.36, 130.4], %, 'seg01')").click()
+    await page.getByRole('button', { name: 'Edit Sketch' }).click()
+
+    const line3 = await u.getSegmentBodyCoords(`[data-overlay-index="${2}"]`)
+
+    // await page.mouse.click(line1.x, line1.y)
+    // await page.keyboard.down('Shift')
+    await page.mouse.click(line3.x, line3.y)
+    await page.waitForTimeout(100) // this wait is needed for webkit - not sure why
+    // await page.keyboard.up('Shift')
+    await page
+      .getByRole('button', {
+        name: 'Constrain',
+      })
+      .click()
+    await page
+      .getByRole('button', { name: 'remove constraints', exact: true })
+      .click()
+
+    const activeLinesContent = await page.locator('.cm-activeLine').all()
+    await expect(activeLinesContent).toHaveLength(1)
+    await expect(activeLinesContent[0]).toHaveText('|> line([39.13, 68.63], %)')
+
+    // checking the count of the overlays is a good proxy check that the client sketch scene is in a good state
+    await expect(page.getByTestId('segment-overlay')).toHaveCount(4)
+  })
+  test.describe('Test perpendicular distance constraint', () => {
+    const cases = [
+      {
+        testName: 'Add variable',
+        offset: '-offset001',
+      },
+      {
+        testName: 'No variable',
+        offset: '-128.05',
+      },
+    ] as const
+    for (const { testName, offset } of cases) {
+      test(`${testName}`, async ({ page }) => {
+        await page.addInitScript(async () => {
+          localStorage.setItem(
+            'persistCode',
+            `const yo = 5
+const part001 = startSketchOn('XZ')
+  |> startProfileAt([-7.54, -26.74], %)
+  |> line([74.36, 130.4], %, 'seg01')
+  |> line([78.92, -120.11], %)
+  |> angledLine([segAng('seg01', %), 78.33], %)
+  |> line([41.19, 28.97], %)
+const part002 = startSketchOn('XZ')
+  |> startProfileAt([299.05, 231.45], %)
+  |> xLine(-425.34, %, 'seg-what')
+  |> yLine(-264.06, %)
+  |> xLine(segLen('seg-what', %), %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)`
+          )
+        })
+        const u = await getUtils(page)
+        await page.setViewportSize({ width: 1200, height: 500 })
+        await page.goto('/')
+        await u.waitForAuthSkipAppStart()
+
+        await page.getByText("line([74.36, 130.4], %, 'seg01')").click()
+        await page.getByRole('button', { name: 'Edit Sketch' }).click()
+
+        const [line1, line3] = await Promise.all([
+          u.getSegmentBodyCoords(`[data-overlay-index="${0}"]`),
+          u.getSegmentBodyCoords(`[data-overlay-index="${2}"]`),
+        ])
+
+        await page.mouse.click(line1.x, line1.y)
+        await page.keyboard.down('Shift')
+        await page.mouse.click(line3.x, line3.y)
+        await page.waitForTimeout(100) // this wait is needed for webkit - not sure why
+        await page.keyboard.up('Shift')
+        await page
+          .getByRole('button', {
+            name: 'Constrain',
+          })
+          .click()
+        await page
+          .getByRole('button', { name: 'perpendicular distance', exact: true })
+          .click()
+
+        const createNewVariableCheckbox = page.getByTestId(
+          'create-new-variable-checkbox'
+        )
+        const isChecked = await createNewVariableCheckbox.isChecked()
+        const addVariable = testName === 'Add variable'
+        XOR(isChecked, addVariable) && // XOR because no need to click the checkbox if the state is already correct
+          (await createNewVariableCheckbox.click())
+
+        await page
+          .getByRole('button', { name: 'Add constraining value' })
+          .click()
+
+        const activeLinesContent = await page.locator('.cm-activeLine').all()
+        await expect(activeLinesContent[0]).toHaveText(
+          `|> line([74.36, 130.4], %, 'seg01')`
+        )
+        await expect(activeLinesContent[1]).toHaveText(`}, %)`)
+        await expect(page.locator('.cm-content')).toContainText(`angle: -57,`)
+        await expect(page.locator('.cm-content')).toContainText(
+          `offset: ${offset},`
+        )
+
+        // checking the count of the overlays is a good proxy check that the client sketch scene is in a good state
+        await expect(page.getByTestId('segment-overlay')).toHaveCount(4)
+      })
+    }
+  })
+  test.describe('Test distance between constraint', () => {
+    const cases = [
+      {
+        testName: 'Add variable',
+        constraint: 'horizontal distance',
+        value: "segEndX('seg01', %) + xDis001, 61.34",
+      },
+      {
+        testName: 'No variable',
+        constraint: 'horizontal distance',
+        value: "segEndX('seg01', %) + 88.08, 61.34",
+      },
+      {
+        testName: 'Add variable',
+        constraint: 'vertical distance',
+        value: "154.9, segEndY('seg01', %) - yDis001",
+      },
+      {
+        testName: 'No variable',
+        constraint: 'vertical distance',
+        value: "154.9, segEndY('seg01', %) - 42.32",
+      },
+    ] as const
+    for (const { testName, value, constraint } of cases) {
+      test(`${constraint} - ${testName}`, async ({ page }) => {
+        await page.addInitScript(async () => {
+          localStorage.setItem(
+            'persistCode',
+            `const yo = 5
+const part001 = startSketchOn('XZ')
+  |> startProfileAt([-7.54, -26.74], %)
+  |> line([74.36, 130.4], %)
+  |> line([78.92, -120.11], %)
+  |> line([9.16, 77.79], %)
+  |> line([41.19, 28.97], %)
+const part002 = startSketchOn('XZ')
+  |> startProfileAt([299.05, 231.45], %)
+  |> xLine(-425.34, %, 'seg-what')
+  |> yLine(-264.06, %)
+  |> xLine(segLen('seg-what', %), %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)`
+          )
+        })
+        const u = await getUtils(page)
+        await page.setViewportSize({ width: 1200, height: 500 })
+        await page.goto('/')
+        await u.waitForAuthSkipAppStart()
+
+        await page.getByText('line([74.36, 130.4], %)').click()
+        await page.getByRole('button', { name: 'Edit Sketch' }).click()
+
+        const [line1, line3] = await Promise.all([
+          u.getSegmentBodyCoords(`[data-overlay-index="${0}"]`),
+          u.getSegmentBodyCoords(`[data-overlay-index="${2}"]`),
+        ])
+
+        await page.mouse.click(line1.x, line1.y)
+        await page.keyboard.down('Shift')
+        await page.mouse.click(line3.x, line3.y)
+        await page.waitForTimeout(100) // this wait is needed for webkit - not sure why
+        await page.keyboard.up('Shift')
+        await page
+          .getByRole('button', {
+            name: 'Constrain',
+          })
+          .click()
+        await page
+          .getByRole('button', { name: constraint, exact: true })
+          .click()
+
+        const createNewVariableCheckbox = page.getByTestId(
+          'create-new-variable-checkbox'
+        )
+        const isChecked = await createNewVariableCheckbox.isChecked()
+        const addVariable = testName === 'Add variable'
+        XOR(isChecked, addVariable) && // XOR because no need to click the checkbox if the state is already correct
+          (await createNewVariableCheckbox.click())
+
+        await page
+          .getByRole('button', { name: 'Add constraining value' })
+          .click()
+
+        // checking activeLines assures the cursors are where they should be
+        const codeAfter = [
+          `|> line([74.36, 130.4], %, 'seg01')`,
+          `|> lineTo([${value}], %)`,
+        ]
+
+        const activeLinesContent = await page.locator('.cm-activeLine').all()
+        await Promise.all(
+          activeLinesContent.map(async (line, i) => {
+            await expect(page.locator('.cm-content')).toContainText(
+              codeAfter[i]
+            )
+            // if the code is an active line then the cursor should be on that line
+            await expect(line).toHaveText(codeAfter[i])
+          })
+        )
+
+        // checking the count of the overlays is a good proxy check that the client sketch scene is in a good state
+        await expect(page.getByTestId('segment-overlay')).toHaveCount(4)
+      })
+    }
+  })
   test.describe('Test ABS distance constraint', () => {
     const cases = [
       {
@@ -2521,7 +2760,7 @@ const part002 = startSketchOn('XZ')
           'create-new-variable-checkbox'
         )
         const isChecked = await createNewVariableCheckbox.isChecked()
-        ;((isChecked && !addVariable) || (!isChecked && addVariable)) &&
+        XOR(isChecked, addVariable) && // XOR because no need to click the checkbox if the state is already correct
           (await createNewVariableCheckbox.click())
 
         await page
@@ -2627,7 +2866,7 @@ const part002 = startSketchOn('XZ')
           'create-new-variable-checkbox'
         )
         const isChecked = await createNewVariableCheckbox.isChecked()
-        ;((isChecked && !addVariable) || (!isChecked && addVariable)) &&
+        XOR(isChecked, addVariable) && // XOR because no need to click the checkbox if the state is already correct
           (await createNewVariableCheckbox.click())
 
         await page
@@ -2657,37 +2896,51 @@ const part002 = startSketchOn('XZ')
       })
     }
   })
-  test.describe('Test Angle constraint single selection', () => {
+  test.describe('Test Angle/Length constraint single selection', () => {
     const cases = [
       {
-        testName: 'Add variable',
+        testName: 'Angle - Add variable',
         addVariable: true,
-        value: 'angle001',
+        constraint: 'angle',
+        value: 'angle001, 78.33',
       },
       {
-        testName: 'No variable',
+        testName: 'Angle - No variable',
         addVariable: false,
-        value: '83',
+        constraint: 'angle',
+        value: '83, 78.33',
+      },
+      {
+        testName: 'Length - Add variable',
+        addVariable: true,
+        constraint: 'length',
+        value: '83, length001',
+      },
+      {
+        testName: 'Length - No variable',
+        addVariable: false,
+        constraint: 'length',
+        value: '83, 78.33',
       },
     ] as const
-    for (const { testName, addVariable, value } of cases) {
+    for (const { testName, addVariable, value, constraint } of cases) {
       test(`${testName}`, async ({ page }) => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
             `const yo = 5
-    const part001 = startSketchOn('XZ')
-      |> startProfileAt([-7.54, -26.74], %)
-      |> line([74.36, 130.4], %)
-      |> line([78.92, -120.11], %)
-      |> line([9.16, 77.79], %)
-      |> line([41.19, 28.97], %)
-    const part002 = startSketchOn('XZ')
-      |> startProfileAt([299.05, 231.45], %)
-      |> xLine(-425.34, %, 'seg-what')
-      |> yLine(-264.06, %)
-      |> xLine(segLen('seg-what', %), %)
-      |> lineTo([profileStartX(%), profileStartY(%)], %)`
+const part001 = startSketchOn('XZ')
+  |> startProfileAt([-7.54, -26.74], %)
+  |> line([74.36, 130.4], %)
+  |> line([78.92, -120.11], %)
+  |> line([9.16, 77.79], %)
+  |> line([41.19, 28.97], %)
+const part002 = startSketchOn('XZ')
+  |> startProfileAt([299.05, 231.45], %)
+  |> xLine(-425.34, %, 'seg-what')
+  |> yLine(-264.06, %)
+  |> xLine(segLen('seg-what', %), %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)`
           )
         })
         const u = await getUtils(page)
@@ -2708,7 +2961,7 @@ const part002 = startSketchOn('XZ')
             name: 'Constrain',
           })
           .click()
-        await page.getByTestId('angle').click()
+        await page.getByTestId(constraint).click()
 
         if (!addVariable) {
           await page.getByTestId('create-new-variable-checkbox').click()
@@ -2717,7 +2970,7 @@ const part002 = startSketchOn('XZ')
           .getByRole('button', { name: 'Add constraining value' })
           .click()
 
-        const changedCode = `|> angledLine([${value}, 78.33], %)`
+        const changedCode = `|> angledLine([${value}], %)`
         await expect(page.locator('.cm-content')).toContainText(changedCode)
         // checking active assures the cursor is where it should be
         await expect(page.locator('.cm-activeLine')).toHaveText(changedCode)
@@ -2748,7 +3001,7 @@ const part002 = startSketchOn('XZ')
     ] as const
     for (const { codeAfter, constraintName } of cases) {
       test(`${constraintName}`, async ({ page }) => {
-        await page.addInitScript(async () => {
+        await page.addInitScript(async (customCode) => {
           localStorage.setItem(
             'persistCode',
             `const yo = 5
@@ -2774,15 +3027,21 @@ const part002 = startSketchOn('XZ')
         await page.getByText('line([74.36, 130.4], %)').click()
         await page.getByRole('button', { name: 'Edit Sketch' }).click()
 
-        const line1 = await u.getBoundingBox(`[data-overlay-index="${0}"]`)
-        const line3 = await u.getBoundingBox(`[data-overlay-index="${2}"]`)
-        const line4 = await u.getBoundingBox(`[data-overlay-index="${3}"]`)
+        const line1 = await u.getSegmentBodyCoords(
+          `[data-overlay-index="${0}"]`
+        )
+        const line3 = await u.getSegmentBodyCoords(
+          `[data-overlay-index="${2}"]`
+        )
+        const line4 = await u.getSegmentBodyCoords(
+          `[data-overlay-index="${3}"]`
+        )
 
         // select two segments by holding down shift
-        await page.mouse.click(line1.x - 20, line1.y + 20)
+        await page.mouse.click(line1.x, line1.y)
         await page.keyboard.down('Shift')
-        await page.mouse.click(line3.x - 3, line3.y + 20)
-        await page.mouse.click(line4.x - 15, line4.y + 15)
+        await page.mouse.click(line3.x, line3.y)
+        await page.mouse.click(line4.x, line4.y)
         await page.keyboard.up('Shift')
         const constraintMenuButton = page.getByRole('button', {
           name: 'Constrain',

package.json

@@ -1,6 +1,6 @@
 {
   "name": "untitled-app",
-  "version": "0.21.9",
+  "version": "0.22.0",
   "private": true,
   "dependencies": {
     "@codemirror/autocomplete": "^6.16.0",

src-tauri/tauri.conf.json

@@ -74,5 +74,5 @@
     }
   },
   "productName": "Zoo Modeling App",
-  "version": "0.21.9"
+  "version": "0.22.0"
 }

src/components/ModelingMachineProvider.tsx

@@ -508,13 +508,26 @@ export const ModelingMachineProvider = ({
         },
         'Get horizontal info': async ({
           selectionRanges,
+          sketchDetails,
         }): Promise<SetSelections> => {
           const { modifiedAst, pathToNodeMap } =
             await applyConstraintHorzVertDistance({
               constraint: 'setHorzDistance',
               selectionRanges,
             })
-          await kclManager.updateAst(modifiedAst, true)
+          const _modifiedAst = parse(recast(modifiedAst))
+          if (!sketchDetails) throw new Error('No sketch details')
+          const updatedPathToNode = updatePathToNodeFromMap(
+            sketchDetails.sketchPathToNode,
+            pathToNodeMap
+          )
+          await sceneEntitiesManager.updateAstAndRejigSketch(
+            updatedPathToNode,
+            _modifiedAst,
+            sketchDetails.zAxis,
+            sketchDetails.yAxis,
+            sketchDetails.origin
+          )
           return {
             selectionType: 'completeSelection',
             selection: pathMapToSelections(
@@ -522,17 +535,31 @@ export const ModelingMachineProvider = ({
               selectionRanges,
               pathToNodeMap
             ),
+            updatedPathToNode,
           }
         },
         'Get vertical info': async ({
           selectionRanges,
+          sketchDetails,
         }): Promise<SetSelections> => {
           const { modifiedAst, pathToNodeMap } =
             await applyConstraintHorzVertDistance({
               constraint: 'setVertDistance',
               selectionRanges,
             })
-          await kclManager.updateAst(modifiedAst, true)
+          const _modifiedAst = parse(recast(modifiedAst))
+          if (!sketchDetails) throw new Error('No sketch details')
+          const updatedPathToNode = updatePathToNodeFromMap(
+            sketchDetails.sketchPathToNode,
+            pathToNodeMap
+          )
+          await sceneEntitiesManager.updateAstAndRejigSketch(
+            updatedPathToNode,
+            _modifiedAst,
+            sketchDetails.zAxis,
+            sketchDetails.yAxis,
+            sketchDetails.origin
+          )
           return {
             selectionType: 'completeSelection',
             selection: pathMapToSelections(
@@ -540,6 +567,7 @@ export const ModelingMachineProvider = ({
               selectionRanges,
               pathToNodeMap
             ),
+            updatedPathToNode,
           }
         },
         'Get angle info': async ({
@@ -581,10 +609,23 @@ export const ModelingMachineProvider = ({
         },
         'Get length info': async ({
           selectionRanges,
+          sketchDetails,
         }): Promise<SetSelections> => {
           const { modifiedAst, pathToNodeMap } =
             await applyConstraintAngleLength({ selectionRanges })
-          await kclManager.updateAst(modifiedAst, true)
+          const _modifiedAst = parse(recast(modifiedAst))
+          if (!sketchDetails) throw new Error('No sketch details')
+          const updatedPathToNode = updatePathToNodeFromMap(
+            sketchDetails.sketchPathToNode,
+            pathToNodeMap
+          )
+          await sceneEntitiesManager.updateAstAndRejigSketch(
+            updatedPathToNode,
+            _modifiedAst,
+            sketchDetails.zAxis,
+            sketchDetails.yAxis,
+            sketchDetails.origin
+          )
           return {
             selectionType: 'completeSelection',
             selection: pathMapToSelections(
@@ -592,17 +633,31 @@ export const ModelingMachineProvider = ({
               selectionRanges,
               pathToNodeMap
             ),
+            updatedPathToNode,
           }
         },
         'Get perpendicular distance info': async ({
           selectionRanges,
+          sketchDetails,
         }): Promise<SetSelections> => {
           const { modifiedAst, pathToNodeMap } = await applyConstraintIntersect(
             {
               selectionRanges,
             }
           )
-          await kclManager.updateAst(modifiedAst, true)
+          const _modifiedAst = parse(recast(modifiedAst))
+          if (!sketchDetails) throw new Error('No sketch details')
+          const updatedPathToNode = updatePathToNodeFromMap(
+            sketchDetails.sketchPathToNode,
+            pathToNodeMap
+          )
+          await sceneEntitiesManager.updateAstAndRejigSketch(
+            updatedPathToNode,
+            _modifiedAst,
+            sketchDetails.zAxis,
+            sketchDetails.yAxis,
+            sketchDetails.origin
+          )
           return {
             selectionType: 'completeSelection',
             selection: pathMapToSelections(
@@ -610,6 +665,7 @@ export const ModelingMachineProvider = ({
               selectionRanges,
               pathToNodeMap
             ),
+            updatedPathToNode,
           }
         },
         'Get ABS X info': async ({

src/components/Toolbar/Intersect.tsx

@@ -140,7 +140,11 @@ export async function applyConstraintIntersect({
     value: valueUsedInTransform,
     initialVariableName: 'offset',
   })
-  if (segName === tagInfo?.tag && Number(value) === valueUsedInTransform) {
+  if (
+    !variableName &&
+    segName === tagInfo?.tag &&
+    Number(value) === valueUsedInTransform
+  ) {
     return {
       modifiedAst,
       pathToNodeMap,
@@ -169,6 +173,10 @@ export async function applyConstraintIntersect({
       createVariableDeclaration(variableName, valueNode)
     )
     _modifiedAst.body = newBody
+    Object.values(_pathToNodeMap).forEach((pathToNode) => {
+      const index = pathToNode.findIndex((a) => a[0] === 'body') + 1
+      pathToNode[index][0] = Number(pathToNode[index][0]) + 1
+    })
   }
   return {
     modifiedAst: _modifiedAst,

src/components/Toolbar/SetHorzVertDistance.tsx

@@ -106,7 +106,11 @@ export async function applyConstraintHorzVertDistance({
     value: valueUsedInTransform,
     initialVariableName: constraint === 'setHorzDistance' ? 'xDis' : 'yDis',
   } as any)
-  if (segName === tagInfo?.tag && Number(value) === valueUsedInTransform) {
+  if (
+    !variableName &&
+    segName === tagInfo?.tag &&
+    Number(value) === valueUsedInTransform
+  ) {
     return {
       modifiedAst,
       pathToNodeMap,
@@ -133,6 +137,10 @@ export async function applyConstraintHorzVertDistance({
         createVariableDeclaration(variableName, valueNode)
       )
       _modifiedAst.body = newBody
+      Object.values(pathToNodeMap).forEach((pathToNode) => {
+        const index = pathToNode.findIndex((a) => a[0] === 'body') + 1
+        pathToNode[index][0] = Number(pathToNode[index][0]) + 1
+      })
     }
     return {
       modifiedAst: _modifiedAst,

src/lib/utils.ts

@@ -127,3 +127,7 @@ export function isReducedMotion(): boolean {
     window.matchMedia('(prefers-reduced-motion)').matches
   )
 }
+
+export function XOR(bool1: boolean, bool2: boolean): boolean {
+  return (bool1 || bool2) && !(bool1 && bool2)
+}

src/machines/modelingMachine.ts

@@ -360,10 +360,8 @@ export const modelingMachine = createMachine(
               },
 
               'Constrain remove constraints': {
-                target: 'SketchIdle',
-                internal: true,
                 cond: 'Can constrain remove constraints',
-                actions: ['Constrain remove constraints'],
+                target: 'Await constrain remove constraints',
               },
 
               'Re-execute': {
@@ -586,6 +584,16 @@ export const modelingMachine = createMachine(
             },
           },
 
+          'Await constrain remove constraints': {
+            invoke: {
+              src: 'do-constrain-remove-constraint',
+              id: 'do-constrain-remove-constraint',
+              onDone: {
+                target: 'SketchIdle',
+                actions: 'Set selection',
+              },
+            },
+          },
           'Await constrain horizontally': {
             invoke: {
               src: 'do-constrain-horizontally',
@@ -848,21 +856,6 @@ export const modelingMachine = createMachine(
       'set new sketch metadata': assign((_, { data }) => ({
         sketchDetails: data,
       })),
-      // TODO implement source ranges for all of these constraints
-      // need to make the async like the modal constraints
-      'Constrain remove constraints': ({ selectionRanges, sketchDetails }) => {
-        const { modifiedAst } = applyRemoveConstrainingValues({
-          selectionRanges,
-        })
-        if (!sketchDetails) return
-        sceneEntitiesManager.updateAstAndRejigSketch(
-          sketchDetails?.sketchPathToNode || [],
-          modifiedAst,
-          sketchDetails.zAxis,
-          sketchDetails.yAxis,
-          sketchDetails.origin
-        )
-      },
       'AST extrude': async (_, event) => {
         if (!event.data) return
         const { selection, distance } = event.data
@@ -1109,6 +1102,38 @@ export const modelingMachine = createMachine(
     },
     // end actions
     services: {
+      'do-constrain-remove-constraint': async ({
+        selectionRanges,
+        sketchDetails,
+      }) => {
+        const { modifiedAst, pathToNodeMap } = applyRemoveConstrainingValues({
+          selectionRanges,
+        })
+        if (!sketchDetails) return
+        sceneEntitiesManager.updateAstAndRejigSketch(
+          sketchDetails?.sketchPathToNode || [],
+          modifiedAst,
+          sketchDetails.zAxis,
+          sketchDetails.yAxis,
+          sketchDetails.origin
+        )
+        if (!sketchDetails) return
+        await sceneEntitiesManager.updateAstAndRejigSketch(
+          sketchDetails.sketchPathToNode,
+          modifiedAst,
+          sketchDetails.zAxis,
+          sketchDetails.yAxis,
+          sketchDetails.origin
+        )
+        return {
+          selectionType: 'completeSelection',
+          selection: updateSelections(
+            pathToNodeMap,
+            selectionRanges,
+            parse(recast(modifiedAst))
+          ),
+        }
+      },
       'do-constrain-horizontally': async ({
         selectionRanges,
         sketchDetails,