Merge remote-tracking branch 'origin' into kurt-multi-profile-again

* Add Rust side artifacts for startSketchOn face or plane

* move ast digging

---------

Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch>

.env.production

@@ -1,4 +1,5 @@
 NODE_ENV=production
+DEV=false
 VITE_KC_API_WS_MODELING_URL=wss://api.zoo.dev/ws/modeling/commands
 VITE_KC_API_BASE_URL=https://api.zoo.dev
 VITE_KC_SITE_BASE_URL=https://zoo.dev

.gitattributes

@@ -1,13 +0,0 @@
-# Set default behavior to automatically normalize line endings.
-* text=auto
-
-# Force batch scripts to always use CRLF line endings so that if a repo is accessed
-# in Windows via a file share from Linux, the scripts will work.
-*.{cmd,[cC][mM][dD]} text working-tree-encoding=UTF-16LE eol=CRLF
-*.{bat,[bB][aA][tT]} text working-tree-encoding=UTF-16LE eol=CRLF
-*.{ics,[iI][cC][sS]} text working-tree-encoding=UTF-16LE eol=CRLF
-*.{ps1,[iP][sS][1]} text working-tree-encoding=UTF-16LE eol=CRLF
-
-# Force bash scripts to always use LF line endings so that if a repo is accessed
-# in Unix via a file share from Windows, the scripts will work.
-*.sh text eol=lfol=lf

.github/workflows/e2e-tests.yml

@@ -3,6 +3,7 @@ on:
   push:
     branches: [ main ]
   pull_request:
+    branches: [ main ]
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}

.gitignore

@@ -41,12 +41,9 @@ e2e/playwright/playwright-secrets.env
 e2e/playwright/temp1.png
 e2e/playwright/temp2.png
 e2e/playwright/temp3.png
-# this will be overridden for specific directories
-e2e/playwright/**/*.png
 # exports from snapshot-tests.spec.ts "exports of each format should work"
 e2e/playwright/export-snapshots/*
 !e2e/playwright/export-snapshots/*.png
-!e2e/playwright/snapshot-tests.spec.ts-snapshots/*.png
 
 /kcl-samples
 /test-results/

docs/kcl/HALF_TURN.md

@@ -1,15 +0,0 @@
----
-title: "HALF_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-HALF_TURN: number(deg) = 180deg
-```
-
-

docs/kcl/QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-QUARTER_TURN: number(deg) = 90deg
-```
-
-

docs/kcl/THREE_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "THREE_QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-THREE_QUARTER_TURN: number(deg) = 270deg
-```
-
-

docs/kcl/ZERO.md

@@ -1,15 +0,0 @@
----
-title: "ZERO"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-ZERO: number = 0
-```
-
-

docs/kcl/abs.md

@@ -25,7 +25,7 @@ abs(num: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/acos.md

@@ -25,7 +25,7 @@ acos(num: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/asin.md

@@ -25,7 +25,7 @@ asin(num: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/assert.md

@@ -22,7 +22,7 @@ assert(data: bool, message: string) -> ()
 
 ### Returns
 
-`()`
+`()` 
 
 
 ### Examples

docs/kcl/assertEqual.md

@@ -24,7 +24,7 @@ assertEqual(left: number, right: number, epsilon: number, message: string) -> ()
 
 ### Returns
 
-`()`
+`()` 
 
 
 ### Examples

docs/kcl/assertGreaterThan.md

@@ -23,7 +23,7 @@ assertGreaterThan(left: number, right: number, message: string) -> ()
 
 ### Returns
 
-`()`
+`()` 
 
 
 ### Examples

docs/kcl/assertGreaterThanOrEq.md

@@ -23,7 +23,7 @@ assertGreaterThanOrEq(left: number, right: number, message: string) -> ()
 
 ### Returns
 
-`()`
+`()` 
 
 
 ### Examples

docs/kcl/assertLessThan.md

@@ -23,7 +23,7 @@ assertLessThan(left: number, right: number, message: string) -> ()
 
 ### Returns
 
-`()`
+`()` 
 
 
 ### Examples

docs/kcl/assertLessThanOrEq.md

@@ -23,7 +23,7 @@ assertLessThanOrEq(left: number, right: number, message: string) -> ()
 
 ### Returns
 
-`()`
+`()` 
 
 
 ### Examples

docs/kcl/atan.md

@@ -25,7 +25,7 @@ atan(num: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/atan2.md

@@ -26,7 +26,7 @@ atan2(y: number, x: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/ceil.md

@@ -25,7 +25,7 @@ ceil(num: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/cm.md

@@ -26,7 +26,7 @@ cm() -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/const_HALF_TURN.md

@@ -1,15 +0,0 @@
----
-title: "HALF_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-HALF_TURN: number(deg) = 180deg
-```
-
-

docs/kcl/const_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-QUARTER_TURN: number(deg) = 90deg
-```
-
-

docs/kcl/const_THREE_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "THREE_QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-THREE_QUARTER_TURN: number(deg) = 270deg
-```
-
-

docs/kcl/const_ZERO.md

@@ -1,15 +0,0 @@
----
-title: "ZERO"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-ZERO: number = 0
-```
-
-

docs/kcl/const_const_std-prelude-HALF_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::prelude::HALF_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::prelude::HALF_TURN: number(deg) = 180deg
-```
-
-

docs/kcl/const_const_std-prelude-QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::prelude::QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::prelude::QUARTER_TURN: number(deg) = 90deg
-```
-
-

docs/kcl/const_const_std-prelude-THREE_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::prelude::THREE_QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::prelude::THREE_QUARTER_TURN: number(deg) = 270deg
-```
-
-

docs/kcl/const_const_std-prelude-ZERO.md

@@ -1,15 +0,0 @@
----
-title: "std::prelude::ZERO"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::prelude::ZERO: number = 0
-```
-
-

docs/kcl/e.md

@@ -4,11 +4,9 @@ excerpt: "Return the value of Euler’s number `e`."
 layout: manual
 ---
 
-**WARNING:** This function is deprecated.
-
 Return the value of Euler’s number `e`.
 
-**DEPRECATED** use the constant E
+
 
 ```js
 e() -> number
@@ -22,7 +20,7 @@ e() -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/floor.md

@@ -25,7 +25,7 @@ floor(num: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/ft.md

@@ -26,7 +26,7 @@ ft() -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/getNextAdjacentEdge.md

@@ -21,7 +21,7 @@ getNextAdjacentEdge(tag: TagIdentifier) -> Uuid
 
 ### Returns
 
-`Uuid`
+`Uuid` 
 
 
 ### Examples

docs/kcl/getOppositeEdge.md

@@ -21,7 +21,7 @@ getOppositeEdge(tag: TagIdentifier) -> Uuid
 
 ### Returns
 
-`Uuid`
+`Uuid` 
 
 
 ### Examples

docs/kcl/getPreviousAdjacentEdge.md

@@ -21,7 +21,7 @@ getPreviousAdjacentEdge(tag: TagIdentifier) -> Uuid
 
 ### Returns
 
-`Uuid`
+`Uuid` 
 
 
 ### Examples

docs/kcl/inch.md

@@ -26,7 +26,7 @@ inch() -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/index.md

@@ -9,117 +9,110 @@ layout: manual
 * [Types](kcl/types)
 * [Modules](kcl/modules)
 * [Known Issues](kcl/KNOWN-ISSUES)
-* **`std`**
-  * [`abs`](kcl/abs)
-  * [`acos`](kcl/acos)
-  * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
-  * [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
-  * [`angledLine`](kcl/angledLine)
-  * [`angledLineOfXLength`](kcl/angledLineOfXLength)
-  * [`angledLineOfYLength`](kcl/angledLineOfYLength)
-  * [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
-  * [`angledLineToX`](kcl/angledLineToX)
-  * [`angledLineToY`](kcl/angledLineToY)
-  * [`appearance`](kcl/appearance)
-  * [`arc`](kcl/arc)
-  * [`arcTo`](kcl/arcTo)
-  * [`asin`](kcl/asin)
-  * [`assert`](kcl/assert)
-  * [`assertEqual`](kcl/assertEqual)
-  * [`assertGreaterThan`](kcl/assertGreaterThan)
-  * [`assertGreaterThanOrEq`](kcl/assertGreaterThanOrEq)
-  * [`assertLessThan`](kcl/assertLessThan)
-  * [`assertLessThanOrEq`](kcl/assertLessThanOrEq)
-  * [`atan`](kcl/atan)
-  * [`atan2`](kcl/atan2)
-  * [`bezierCurve`](kcl/bezierCurve)
-  * [`ceil`](kcl/ceil)
-  * [`chamfer`](kcl/chamfer)
-  * [`circle`](kcl/circle)
-  * [`circleThreePoint`](kcl/circleThreePoint)
-  * [`close`](kcl/close)
-  * [`cm`](kcl/cm)
-  * [`extrude`](kcl/extrude)
-  * [`fillet`](kcl/fillet)
-  * [`floor`](kcl/floor)
-  * [`ft`](kcl/ft)
-  * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
-  * [`getOppositeEdge`](kcl/getOppositeEdge)
-  * [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
-  * [`helix`](kcl/helix)
-  * [`helixRevolutions`](kcl/helixRevolutions)
-  * [`hole`](kcl/hole)
-  * [`hollow`](kcl/hollow)
-  * [`inch`](kcl/inch)
-  * [`lastSegX`](kcl/lastSegX)
-  * [`lastSegY`](kcl/lastSegY)
-  * [`legAngX`](kcl/legAngX)
-  * [`legAngY`](kcl/legAngY)
-  * [`legLen`](kcl/legLen)
-  * [`line`](kcl/line)
-  * [`ln`](kcl/ln)
-  * [`loft`](kcl/loft)
-  * [`log`](kcl/log)
-  * [`log10`](kcl/log10)
-  * [`log2`](kcl/log2)
-  * [`m`](kcl/m)
-  * [`map`](kcl/map)
-  * [`max`](kcl/max)
-  * [`min`](kcl/min)
-  * [`mirror2d`](kcl/mirror2d)
-  * [`mm`](kcl/mm)
-  * [`offsetPlane`](kcl/offsetPlane)
-  * [`patternCircular2d`](kcl/patternCircular2d)
-  * [`patternCircular3d`](kcl/patternCircular3d)
-  * [`patternLinear2d`](kcl/patternLinear2d)
-  * [`patternLinear3d`](kcl/patternLinear3d)
-  * [`patternTransform`](kcl/patternTransform)
-  * [`patternTransform2d`](kcl/patternTransform2d)
-  * [`polar`](kcl/polar)
-  * [`polygon`](kcl/polygon)
-  * [`pop`](kcl/pop)
-  * [`pow`](kcl/pow)
-  * [`profileStart`](kcl/profileStart)
-  * [`profileStartX`](kcl/profileStartX)
-  * [`profileStartY`](kcl/profileStartY)
-  * [`push`](kcl/push)
-  * [`reduce`](kcl/reduce)
-  * [`rem`](kcl/rem)
-  * [`revolve`](kcl/revolve)
-  * [`round`](kcl/round)
-  * [`segAng`](kcl/segAng)
-  * [`segEnd`](kcl/segEnd)
-  * [`segEndX`](kcl/segEndX)
-  * [`segEndY`](kcl/segEndY)
-  * [`segLen`](kcl/segLen)
-  * [`segStart`](kcl/segStart)
-  * [`segStartX`](kcl/segStartX)
-  * [`segStartY`](kcl/segStartY)
-  * [`shell`](kcl/shell)
-  * [`sqrt`](kcl/sqrt)
-  * [`startProfileAt`](kcl/startProfileAt)
-  * [`startSketchOn`](kcl/startSketchOn)
-  * [`sweep`](kcl/sweep)
-  * [`tangentToEnd`](kcl/tangentToEnd)
-  * [`tangentialArc`](kcl/tangentialArc)
-  * [`tangentialArcTo`](kcl/tangentialArcTo)
-  * [`tangentialArcToRelative`](kcl/tangentialArcToRelative)
-  * [`toDegrees`](kcl/toDegrees)
-  * [`toRadians`](kcl/toRadians)
-  * [`xLine`](kcl/xLine)
-  * [`xLineTo`](kcl/xLineTo)
-  * [`yLine`](kcl/yLine)
-  * [`yLineTo`](kcl/yLineTo)
-  * [`yd`](kcl/yd)
-* **`std::math`**
-  * [`E`](kcl/const_std-math-E)
-  * [`PI`](kcl/const_std-math-PI)
-  * [`TAU`](kcl/const_std-math-TAU)
-  * [`cos`](kcl/std-math-cos)
-  * [`sin`](kcl/std-math-sin)
-  * [`tan`](kcl/std-math-tan)
-* **`std::prelude`**
-  * [`HALF_TURN`](kcl/const_std-prelude-HALF_TURN)
-  * [`QUARTER_TURN`](kcl/const_std-prelude-QUARTER_TURN)
-  * [`THREE_QUARTER_TURN`](kcl/const_std-prelude-THREE_QUARTER_TURN)
-  * [`ZERO`](kcl/const_std-prelude-ZERO)
+* [`abs`](kcl/abs)
+* [`acos`](kcl/acos)
+* [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
+* [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
+* [`angledLine`](kcl/angledLine)
+* [`angledLineOfXLength`](kcl/angledLineOfXLength)
+* [`angledLineOfYLength`](kcl/angledLineOfYLength)
+* [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
+* [`angledLineToX`](kcl/angledLineToX)
+* [`angledLineToY`](kcl/angledLineToY)
+* [`appearance`](kcl/appearance)
+* [`arc`](kcl/arc)
+* [`arcTo`](kcl/arcTo)
+* [`asin`](kcl/asin)
+* [`assert`](kcl/assert)
+* [`assertEqual`](kcl/assertEqual)
+* [`assertGreaterThan`](kcl/assertGreaterThan)
+* [`assertGreaterThanOrEq`](kcl/assertGreaterThanOrEq)
+* [`assertLessThan`](kcl/assertLessThan)
+* [`assertLessThanOrEq`](kcl/assertLessThanOrEq)
+* [`atan`](kcl/atan)
+* [`atan2`](kcl/atan2)
+* [`bezierCurve`](kcl/bezierCurve)
+* [`ceil`](kcl/ceil)
+* [`chamfer`](kcl/chamfer)
+* [`circle`](kcl/circle)
+* [`circleThreePoint`](kcl/circleThreePoint)
+* [`close`](kcl/close)
+* [`cm`](kcl/cm)
+* [`cos`](kcl/cos)
+* [`e`](kcl/e)
+* [`extrude`](kcl/extrude)
+* [`fillet`](kcl/fillet)
+* [`floor`](kcl/floor)
+* [`ft`](kcl/ft)
+* [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
+* [`getOppositeEdge`](kcl/getOppositeEdge)
+* [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
+* [`helix`](kcl/helix)
+* [`helixRevolutions`](kcl/helixRevolutions)
+* [`hole`](kcl/hole)
+* [`hollow`](kcl/hollow)
+* [`inch`](kcl/inch)
+* [`lastSegX`](kcl/lastSegX)
+* [`lastSegY`](kcl/lastSegY)
+* [`legAngX`](kcl/legAngX)
+* [`legAngY`](kcl/legAngY)
+* [`legLen`](kcl/legLen)
+* [`line`](kcl/line)
+* [`ln`](kcl/ln)
+* [`loft`](kcl/loft)
+* [`log`](kcl/log)
+* [`log10`](kcl/log10)
+* [`log2`](kcl/log2)
+* [`m`](kcl/m)
+* [`map`](kcl/map)
+* [`max`](kcl/max)
+* [`min`](kcl/min)
+* [`mirror2d`](kcl/mirror2d)
+* [`mm`](kcl/mm)
+* [`offsetPlane`](kcl/offsetPlane)
+* [`patternCircular2d`](kcl/patternCircular2d)
+* [`patternCircular3d`](kcl/patternCircular3d)
+* [`patternLinear2d`](kcl/patternLinear2d)
+* [`patternLinear3d`](kcl/patternLinear3d)
+* [`patternTransform`](kcl/patternTransform)
+* [`patternTransform2d`](kcl/patternTransform2d)
+* [`pi`](kcl/pi)
+* [`polar`](kcl/polar)
+* [`polygon`](kcl/polygon)
+* [`pop`](kcl/pop)
+* [`pow`](kcl/pow)
+* [`profileStart`](kcl/profileStart)
+* [`profileStartX`](kcl/profileStartX)
+* [`profileStartY`](kcl/profileStartY)
+* [`push`](kcl/push)
+* [`reduce`](kcl/reduce)
+* [`rem`](kcl/rem)
+* [`revolve`](kcl/revolve)
+* [`round`](kcl/round)
+* [`segAng`](kcl/segAng)
+* [`segEnd`](kcl/segEnd)
+* [`segEndX`](kcl/segEndX)
+* [`segEndY`](kcl/segEndY)
+* [`segLen`](kcl/segLen)
+* [`segStart`](kcl/segStart)
+* [`segStartX`](kcl/segStartX)
+* [`segStartY`](kcl/segStartY)
+* [`shell`](kcl/shell)
+* [`sin`](kcl/sin)
+* [`sqrt`](kcl/sqrt)
+* [`startProfileAt`](kcl/startProfileAt)
+* [`startSketchOn`](kcl/startSketchOn)
+* [`sweep`](kcl/sweep)
+* [`tan`](kcl/tan)
+* [`tangentToEnd`](kcl/tangentToEnd)
+* [`tangentialArc`](kcl/tangentialArc)
+* [`tangentialArcTo`](kcl/tangentialArcTo)
+* [`tangentialArcToRelative`](kcl/tangentialArcToRelative)
+* [`tau`](kcl/tau)
+* [`toDegrees`](kcl/toDegrees)
+* [`toRadians`](kcl/toRadians)
+* [`xLine`](kcl/xLine)
+* [`xLineTo`](kcl/xLineTo)
+* [`yLine`](kcl/yLine)
+* [`yLineTo`](kcl/yLineTo)
+* [`yd`](kcl/yd)

docs/kcl/lastSegX.md

@@ -17,11 +17,11 @@ lastSegX(sketch: Sketch) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | The sketch whose line segment is being queried | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/lastSegY.md

@@ -17,11 +17,11 @@ lastSegY(sketch: Sketch) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | The sketch whose line segment is being queried | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/legAngX.md

@@ -26,7 +26,7 @@ legAngX(hypotenuse: number, leg: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/legAngY.md

@@ -26,7 +26,7 @@ legAngY(hypotenuse: number, leg: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/legLen.md

@@ -26,7 +26,7 @@ legLen(hypotenuse: number, leg: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/m.md

@@ -26,7 +26,7 @@ m() -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/map.md

@@ -22,7 +22,7 @@ map(array: [KclValue], map_fn: FunctionParam) -> [KclValue]
 
 ### Returns
 
-[`[KclValue]`](/docs/kcl/types/KclValue)
+[`[KclValue]`](/docs/kcl/types/KclValue) 
 
 
 ### Examples

docs/kcl/max.md

@@ -25,7 +25,7 @@ max(args: [number]) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/min.md

@@ -25,7 +25,7 @@ min(args: [number]) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/mm.md

@@ -26,7 +26,7 @@ mm() -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/modules.md

@@ -57,55 +57,3 @@ Imported symbols can be renamed for convenience or to avoid name collisions.
 ```
 import increment as inc, decrement as dec from "util.kcl"
 ```
-
-## Importing files from other CAD systems
-
-`import` can also be used to import files from other CAD systems. The format of the statement is the
-same as for KCL files. You can only import the whole file, not items from it. E.g.,
-
-```
-import "tests/inputs/cube.obj"
-
-// Use `cube` just like a KCL object.
-```
-
-```
-import "tests/inputs/cube-2.sldprt" as cube
-
-// Use `cube` just like a KCL object.
-```
-
-You can make the file format explicit using a format attribute (useful if using a different
-extension), e.g.,
-
-```
-@(format = obj)
-import "tests/inputs/cube"
-```
-
-For formats lacking unit data (such as STL, OBJ, or PLY files), the default
-unit of measurement is millimeters. Alternatively you may specify the unit
-by using an attirbute. Likewise, you can also specify a coordinate system. E.g.,
-
-```
-@(unitLength = ft, coords = opengl)
-import "tests/inputs/cube.obj"
-```
-
-When importing a GLTF file, the bin file will be imported as well.
-
-Import paths are relative to the current project directory. Imports currently only work when
-using the native Modeling App, not in the browser.
-
-### Supported values
-
-File formats: `fbx`, `gltf`/`glb`, `obj`+, `ply`+, `sldprt`, `step`/`stp`, `stl`+. (Those marked with a
-'+' support customising the length unit and coordinate system).
-
-Length units: `mm` (the default), `cm`, `m`, `inch`, `ft`, `yd`.
-
-Coordinate systems:
-
-- `zoo` (the default), forward: -Y, up: +Z, handedness: right
-- `opengl`, forward: +Z, up: +Y, handedness: right
-- `vulkan`, forward: +Z, up: -Y, handedness: left

docs/kcl/patternCircular2d.md

@@ -9,7 +9,7 @@ Repeat a 2-dimensional sketch some number of times along a partial or
 complete circle some specified number of times. Each object may additionally be rotated along the circle, ensuring orentation of the solid with respect to the center of the circle is maintained.
 
 ```js
-patternCircular2d(sketch_set: SketchSet, instances: integer, center: [number], arc_degrees: number, rotate_duplicates: bool, use_original?: bool) -> [Sketch]
+patternCircular2d(data: CircularPattern2dData, sketch_set: SketchSet) -> [Sketch]
 ```
 
 
@@ -17,16 +17,12 @@ patternCircular2d(sketch_set: SketchSet, instances: integer, center: [number], a
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketch(es) to pattern | Yes |
-| `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
-| `center` | `[number]` | The center about which to make the pattern. This is a 2D vector. | Yes |
-| `arc_degrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
-| `rotate_duplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `data` | [`CircularPattern2dData`](/docs/kcl/types/CircularPattern2dData) | Data for a circular pattern on a 2D sketch. | Yes |
+| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
 
 ### Returns
 
-[`[Sketch]`](/docs/kcl/types/Sketch)
+[`[Sketch]`](/docs/kcl/types/Sketch) 
 
 
 ### Examples
@@ -38,12 +34,12 @@ exampleSketch = startSketchOn('XZ')
   |> line(end = [-1, 0])
   |> line(end = [0, -5])
   |> close()
-  |> patternCircular2d(
+  |> patternCircular2d({
        center = [0, 0],
        instances = 13,
        arcDegrees = 360,
-       rotateDuplicates = true,
-     )
+       rotateDuplicates = true
+     }, %)
 
 example = extrude(exampleSketch, length = 1)
 ```

docs/kcl/pi.md

@@ -4,11 +4,9 @@ excerpt: "Return the value of `pi`. Archimedes’ constant (π)."
 layout: manual
 ---
 
-**WARNING:** This function is deprecated.
-
 Return the value of `pi`. Archimedes’ constant (π).
 
-**DEPRECATED** use the constant PI
+
 
 ```js
 pi() -> number
@@ -22,7 +20,7 @@ pi() -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/polar.md

@@ -21,7 +21,7 @@ polar(data: PolarCoordsData) -> [number]
 
 ### Returns
 
-`[number]`
+`[number]` 
 
 
 ### Examples

docs/kcl/pow.md

@@ -26,7 +26,7 @@ pow(num: number, pow: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/profileStartX.md

@@ -21,7 +21,7 @@ profileStartX(sketch: Sketch) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/profileStartY.md

@@ -21,7 +21,7 @@ profileStartY(sketch: Sketch) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/reduce.md

@@ -76,7 +76,7 @@ assertEqual(sum, 6, 0.00001, "1 + 2 + 3 summed is 6")
 // Declare a function that sketches a decagon.
 fn decagon(radius) {
   // Each side of the decagon is turned this many degrees from the previous angle.
-  stepAngle = 1 / 10 * TAU
+  stepAngle = 1 / 10 * tau()
 
   // Start the decagon sketch at this point.
   startOfDecagonSketch = startSketchOn('XY')
@@ -97,7 +97,7 @@ fn decagon(radius) {
 
 /* The `decagon` above is basically like this pseudo-code:
 fn decagon(radius):
-    stepAngle = (1/10) * TAU
+    stepAngle = (1/10) * tau()
     plane = startSketchOn('XY')
     startOfDecagonSketch = startProfileAt([(cos(0)*radius), (sin(0) * radius)], plane)
 

docs/kcl/rem.md

@@ -26,7 +26,7 @@ rem(num: number, divisor: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples

docs/kcl/round.md

@@ -25,7 +25,7 @@ round(num: number) -> number
 
 ### Returns
 
-`number`
+`number` 
 
 
 ### Examples