A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)

Closes #5355

.github/ci-cd-scripts/playwright-electron.sh

@@ -21,7 +21,7 @@ if [[ ! -f "test-results/.last-run.json" ]]; then
 fi
 
 retry=1
-max_retrys=5
+max_retrys=1
 
 # retry failed tests, doing our own retries because using inbuilt playwright retries causes connection issues
 while [[ $retry -le $max_retrys ]]; do

.github/workflows/build-and-store-wasm.yml

@@ -22,6 +22,9 @@ jobs:
         uses: Swatinem/rust-cache@v2
         with:
           workspaces: './src/wasm-lib'
+      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
+        with:
+          tool: wasm-pack
       - name: build wasm
         run: yarn build:wasm
 

.github/workflows/build-apps.yml

@@ -32,7 +32,6 @@ jobs:
       - uses: actions/setup-node@v4
         with:
           node-version-file: '.nvmrc'
-          cache: 'yarn'
 
       - run: yarn install
 
@@ -44,6 +43,10 @@ jobs:
           workspaces: './src/wasm-lib'
 
       # TODO: see if we can fetch from main instead if no diff at src/wasm-lib
+      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
+        with:
+          tool: wasm-pack
+
       - name: Run build:wasm
         run: "yarn build:wasm"
 
@@ -120,15 +123,13 @@ jobs:
           cp prepared-files/assets/icon.ico assets/icon.ico
           cp prepared-files/assets/icon.png assets/icon.png
 
-      - name: Sync node version and setup cache
-        uses: actions/setup-node@v4
+      - uses: actions/setup-node@v4
         with:
           node-version-file: '.nvmrc'
-          cache: 'yarn' # Set this to npm, yarn or pnpm.
 
       - name: yarn install
         # Windows is picky sometimes and fails on fetch. Step takes about ~30s
-        uses: nick-fields/retry@v3.0.0
+        uses: nick-fields/retry@v3.0.1
         with:
           timeout_minutes: 2
           max_attempts: 3
@@ -179,7 +180,7 @@ jobs:
           WINDOWS_CERTIFICATE_THUMBPRINT: ${{ secrets.WINDOWS_CERTIFICATE_THUMBPRINT }}
           DEBUG: "electron-notarize*"
         # TODO: Fix electron-notarize flakes. The logs above should help gather more data on failures
-        uses: nick-fields/retry@v3.0.0
+        uses: nick-fields/retry@v3.0.1
         with:
           timeout_minutes: 10
           max_attempts: 3
@@ -240,7 +241,7 @@ jobs:
           WINDOWS_CERTIFICATE_THUMBPRINT: ${{ secrets.WINDOWS_CERTIFICATE_THUMBPRINT }}
           DEBUG: "electron-notarize*"
         # TODO: Fix electron-notarize flakes. The logs above should help gather more data on failures
-        uses: nick-fields/retry@v3.0.0
+        uses: nick-fields/retry@v3.0.1
         with:
           timeout_minutes: 10
           max_attempts: 3

.github/workflows/cargo-test.yml

@@ -46,7 +46,7 @@ jobs:
         shell: bash
         run: |-
           cd "${{ matrix.dir }}"
-          cargo llvm-cov nextest --workspace --lcov --output-path lcov.info --test-threads=1 --no-fail-fast -P ci 2>&1 | tee /tmp/github-actions.log
+          cargo llvm-cov nextest --workspace --lcov --output-path lcov.info --test-threads=1 --retries=2 --no-fail-fast -P ci 2>&1 | tee /tmp/github-actions.log
         env:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN}}
           RUST_MIN_STACK: 10485760000

.github/workflows/check-exampleKcl.yml

@@ -26,11 +26,21 @@ jobs:
             const issue_number = context.payload.pull_request.number;
             const owner = context.repo.owner;
             const repo = context.repo.repo;
-
-            // Post a comment on the PR
-            await github.rest.issues.createComment({
+            
+            const { data: comments } = await github.rest.issues.listComments({
               owner,
               repo,
-              issue_number,
-              body: message,
-            });
+              issue_number
+            });
+
+            const commentExists = comments.some(comment => comment.body === message);
+
+            if (!commentExists) {
+              // Post a comment on the PR
+              await github.rest.issues.createComment({
+                owner,
+                repo,
+                issue_number,
+                body: message,
+              });
+            }

.github/workflows/e2e-tests.yml

@@ -89,6 +89,9 @@ jobs:
       continue-on-error: true
     - name: Setup Rust
       uses: dtolnay/rust-toolchain@stable
+    - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
+      with:
+        tool: wasm-pack
     - name: Cache Wasm (because rust diff)
       if: needs.check-rust-changes.outputs.rust-changed == 'true'
       uses: Swatinem/rust-cache@v2
@@ -200,9 +203,11 @@ jobs:
     - name: Run playwright/electron flow (with retries)
       id: retry
       if: ${{ !cancelled() && (success() || failure()) }}
-      shell: bash
-      run: |
-        .github/ci-cd-scripts/playwright-electron.sh ${{matrix.shardIndex}} ${{matrix.shardTotal}} ${{matrix.os}}
+      uses: nick-fields/retry@v3.0.1
+      with:
+        command: .github/ci-cd-scripts/playwright-electron.sh ${{matrix.shardIndex}} ${{matrix.shardTotal}} ${{matrix.os}}
+        timeout_minutes: 30
+        max_attempts: 25
       env:
         CI: true
         FAIL_ON_CONSOLE_ERRORS: true

.github/workflows/static-analysis.yml

@@ -37,6 +37,9 @@ jobs:
           node-version-file: '.nvmrc'
           cache: 'yarn'
       - run: yarn install
+      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
+        with:
+          tool: wasm-pack
       - run: yarn build:wasm
 
   yarn-tsc:
@@ -53,6 +56,9 @@ jobs:
         with:
           workspaces: './src/wasm-lib'
 
+      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
+        with:
+          tool: wasm-pack
       - run: yarn build:wasm
       - run: yarn tsc
 
@@ -92,6 +98,9 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
+      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
+        with:
+          tool: wasm-pack
       - run: yarn build:wasm
 
       - run: yarn simpleserver:bg
@@ -118,6 +127,9 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
+      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
+        with:
+          tool: wasm-pack
       - run: yarn build:wasm
 
       - run: yarn simpleserver:bg

.gitignore

@@ -24,7 +24,7 @@ yarn-debug.log*
 yarn-error.log*
 
 .idea
-.vscode
+# .vscode
 .helix
 src/wasm-lib/.idea
 src/wasm-lib/.vscode
@@ -41,9 +41,12 @@ e2e/playwright/playwright-secrets.env
 e2e/playwright/temp1.png
 e2e/playwright/temp2.png
 e2e/playwright/temp3.png
+# this will be overridden for specific directories
+e2e/playwright/**/*.png
 # exports from snapshot-tests.spec.ts "exports of each format should work"
 e2e/playwright/export-snapshots/*
 !e2e/playwright/export-snapshots/*.png
+!e2e/playwright/snapshot-tests.spec.ts-snapshots/*.png
 
 /kcl-samples
 /test-results/

.vscode/settings.json

@@ -0,0 +1,5 @@
+{
+    "rust-analyzer.linkedProjects": [
+        "src/wasm-lib/Cargo.toml"
+    ]
+}

README.md

@@ -48,22 +48,49 @@ We recommend downloading the latest application binary from [our Releases page](
 
 ## Running a development build
 
-First, [install Rust via `rustup`](https://www.rust-lang.org/tools/install). This project uses a lot of Rust compiled to [WASM](https://webassembly.org/) within it. We always use the latest stable version of Rust, so you may need to run `rustup update stable`. Then, run:
+Install a node version manager such as [fnm](https://github.com/Schniz/fnm?tab=readme-ov-#installation).
 
+On Windows, it's also recommended to [upgrade your PowerShell version](https://learn.microsoft.com/en-us/powershell/scripting/install/installing-powershell-on-windows?view=powershell-7.5#winget), we're using 7.
+
+Then in the repo run the following to install and use the node version specified in `.nvmrc`. You might need to specify your processor architecture with `--arch arm64` or `--arch x64` if it's not autodetected. 
+```
+fnm install --corepack-enabled
+fnm use
+```
+
+Install the NPM dependencies with:
 ```
 yarn install
 ```
 
-followed by:
-
+This project uses a lot of Rust compiled to [WASM](https://webassembly.org/) within it. We have package scripts to run rustup, see `package.json` for reference:
 ```
+# macOS/Linux
+yarn install:rust
+yarn install:wasm-pack:sh
+
+# Windows
+yarn install:rust:windows
+yarn install:wasm-pack:cargo
+```
+
+Then to build the WASM layer, run:
+```
+# macOS/Linux
 yarn build:wasm
+
+# Windows
+yarn build:wasm:windows
 ```
 
-or if you have the gh cli installed
+Or if you have the `gh` cli installed and want to download the latest main wasm bundle. Note that on Windows, you need to associate .ps1 files with PowerShell, which can be done via the right click menu, selecting `C:\Program Files\PowerShell\7\pwsh.exe`, and you can install tools like `gh` via `yarn install:tools:windows`.
 
 ```
-./get-latest-wasm-bundle.sh # this will download the latest main wasm bundle
+# macOS/Linux
+yarn fetch:wasm
+
+# Windows
+yarn fetch:wasm:windows
 ```
 
 That will build the WASM binary and put in the `public` dir (though gitignored).
@@ -74,7 +101,7 @@ Finally, to run the web app only, run:
 yarn start
 ```
 
-If you're not an KittyCAD employee you won't be able to access the dev environment, you should copy everything from `.env.production` to `.env.development` to make it point to production instead, then when you navigate to `localhost:3000` the easiest way to sign in is to paste `localStorage.setItem('TOKEN_PERSIST_KEY', "your-token-from-https://zoo.dev/account/api-tokens")` replacing the with a real token from https://zoo.dev/account/api-tokens of course, then navigate to localhost:3000 again. Note that navigating to `localhost:3000/signin` removes your token so you will need to set the token again.
+If you're not a Zoo employee you won't be able to access the dev environment, you should copy everything from `.env.production` to `.env.development` to make it point to production instead, then when you navigate to `localhost:3000` the easiest way to sign in is to paste `localStorage.setItem('TOKEN_PERSIST_KEY', "your-token-from-https://zoo.dev/account/api-tokens")` replacing the with a real token from https://zoo.dev/account/api-tokens of course, then navigate to localhost:3000 again. Note that navigating to `localhost:3000/signin` removes your token so you will need to set the token again.
 
 ### Development environment variables
 
@@ -101,7 +128,7 @@ This will start the application and hot-reload on changes.
 
 Devtools can be opened with the usual Cmd-Opt-I (Mac) or Ctrl-Shift-I (Linux and Windows).
 
-To build with electron-builder, run `yarn tronb:package:dev` (or `yarn tronb:package:prod` to point to the .env.production variables)
+To package the app for your platform with electron-builder, run `yarn tronb:package:dev` (or `yarn tronb:package:prod` to point to the .env.production variables)
 
 ## Checking out commits / Bisecting
 

docs/kcl/HALF_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "HALF_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+HALF_TURN: number(deg) = 180deg
+```
+
+

docs/kcl/QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+QUARTER_TURN: number(deg) = 90deg
+```
+
+

docs/kcl/THREE_QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "THREE_QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+THREE_QUARTER_TURN: number(deg) = 270deg
+```
+
+

docs/kcl/ZERO.md

@@ -0,0 +1,15 @@
+---
+title: "ZERO"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+ZERO: number = 0
+```
+
+

docs/kcl/abs.md

@@ -25,7 +25,7 @@ abs(num: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/acos.md

@@ -25,7 +25,7 @@ acos(num: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/angleToMatchLengthX.md

@@ -23,7 +23,7 @@ angleToMatchLengthX(tag: TagIdentifier, to: number, sketch: Sketch) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/angleToMatchLengthY.md

@@ -23,7 +23,7 @@ angleToMatchLengthY(tag: TagIdentifier, to: number, sketch: Sketch) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/appearance.md

@@ -9,7 +9,7 @@ Set the appearance of a solid. This only works on solids, not sketches or indivi
 This will work on any solid, including extruded solids, revolved solids, and shelled solids.
 
 ```js
-appearance(solid_set: SolidSet, color: String, metalness?: number, roughness?: number) -> SolidSet
+appearance(solidSet: SolidSet, color: String, metalness?: number, roughness?: number) -> SolidSet
 ```
 
 
@@ -17,7 +17,7 @@ appearance(solid_set: SolidSet, color: String, metalness?: number, roughness?: n
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid_set` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) whose appearance is being set | Yes |
+| `solidSet` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) whose appearance is being set | Yes |
 | `color` | `String` | Color of the new material, a hex string like '#ff0000' | Yes |
 | `metalness` | `number` | Metalness of the new material, a percentage like 95.7. | No |
 | `roughness` | `number` | Roughness of the new material, a percentage like 95.7. | No |

docs/kcl/asin.md

@@ -25,7 +25,7 @@ asin(num: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/assert.md

@@ -22,7 +22,7 @@ assert(data: bool, message: string) -> ()
 
 ### Returns
 
-`()` 
+`()`
 
 
 ### Examples

docs/kcl/assertEqual.md

@@ -24,7 +24,7 @@ assertEqual(left: number, right: number, epsilon: number, message: string) -> ()
 
 ### Returns
 
-`()` 
+`()`
 
 
 ### Examples

docs/kcl/assertGreaterThan.md

@@ -23,7 +23,7 @@ assertGreaterThan(left: number, right: number, message: string) -> ()
 
 ### Returns
 
-`()` 
+`()`
 
 
 ### Examples

docs/kcl/assertGreaterThanOrEq.md

@@ -23,7 +23,7 @@ assertGreaterThanOrEq(left: number, right: number, message: string) -> ()
 
 ### Returns
 
-`()` 
+`()`
 
 
 ### Examples

docs/kcl/assertLessThan.md

@@ -23,7 +23,7 @@ assertLessThan(left: number, right: number, message: string) -> ()
 
 ### Returns
 
-`()` 
+`()`
 
 
 ### Examples

docs/kcl/assertLessThanOrEq.md

@@ -23,7 +23,7 @@ assertLessThanOrEq(left: number, right: number, message: string) -> ()
 
 ### Returns
 
-`()` 
+`()`
 
 
 ### Examples

docs/kcl/atan.md

@@ -25,7 +25,7 @@ atan(num: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/atan2.md

@@ -26,7 +26,7 @@ atan2(y: number, x: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/ceil.md

@@ -25,7 +25,7 @@ ceil(num: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/circle.md

@@ -9,7 +9,7 @@ Construct a 2-dimensional circle, of the specified radius, centered at
 the provided (x, y) origin point.
 
 ```js
-circle(data: CircleData, sketch_surface_or_group: SketchOrSurface, tag?: TagDeclarator) -> Sketch
+circle(data: CircleData, sketchSurfaceOrGroup: SketchOrSurface, tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -18,7 +18,7 @@ circle(data: CircleData, sketch_surface_or_group: SketchOrSurface, tag?: TagDecl
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `data` | [`CircleData`](/docs/kcl/types/CircleData) | Data for drawing an circle | Yes |
-| `sketch_surface_or_group` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | A sketch surface or a sketch. | Yes |
+| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | A sketch surface or a sketch. | Yes |
 | `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
 
 ### Returns

docs/kcl/circleThreePoint.md

@@ -9,7 +9,7 @@ Construct a circle derived from 3 points.
 
 
 ```js
-circleThreePoint(p1: [number], p2: [number], p3: [number], sketch_surface_or_group: SketchOrSurface, tag?: TagDeclarator) -> Sketch
+circleThreePoint(p1: [number], p2: [number], p3: [number], sketchSurfaceOrGroup: SketchOrSurface, tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -20,7 +20,7 @@ circleThreePoint(p1: [number], p2: [number], p3: [number], sketch_surface_or_gro
 | `p1` | `[number]` | 1st point to derive the circle. | Yes |
 | `p2` | `[number]` | 2nd point to derive the circle. | Yes |
 | `p3` | `[number]` | 3rd point to derive the circle. | Yes |
-| `sketch_surface_or_group` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | Plane or surface to sketch on. | Yes |
+| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | Plane or surface to sketch on. | Yes |
 | `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Identifier for the circle to reference elsewhere. | No |
 
 ### Returns

docs/kcl/cm.md

@@ -26,7 +26,7 @@ cm() -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/const_HALF_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "HALF_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+HALF_TURN: number(deg) = 180deg
+```
+
+

docs/kcl/const_QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+QUARTER_TURN: number(deg) = 90deg
+```
+
+

docs/kcl/const_THREE_QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "THREE_QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+THREE_QUARTER_TURN: number(deg) = 270deg
+```
+
+

docs/kcl/const_ZERO.md

@@ -0,0 +1,15 @@
+---
+title: "ZERO"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+ZERO: number = 0
+```
+
+

docs/kcl/const_std-HALF_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::HALF_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::HALF_TURN: number(deg) = 180deg
+```
+
+

docs/kcl/const_std-QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::QUARTER_TURN: number(deg) = 90deg
+```
+
+

docs/kcl/const_std-THREE_QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::THREE_QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::THREE_QUARTER_TURN: number(deg) = 270deg
+```
+
+

docs/kcl/const_std-ZERO.md

@@ -0,0 +1,15 @@
+---
+title: "std::ZERO"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::ZERO: number = 0
+```
+
+

docs/kcl/e.md

@@ -4,9 +4,11 @@ excerpt: "Return the value of Euler’s number `e`."
 layout: manual
 ---
 
+**WARNING:** This function is deprecated.
+
 Return the value of Euler’s number `e`.
 
-
+**DEPRECATED** use the constant E
 
 ```js
 e() -> number
@@ -20,7 +22,7 @@ e() -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/extrude.md

@@ -9,7 +9,7 @@ Extend a 2-dimensional sketch through a third dimension in order to
 create new 3-dimensional volume, or if extruded into an existing volume, cut into an existing solid.
 
 ```js
-extrude(sketch_set: SketchSet, length: number) -> SolidSet
+extrude(sketchSet: SketchSet, length: number) -> SolidSet
 ```
 
 
@@ -17,7 +17,7 @@ extrude(sketch_set: SketchSet, length: number) -> SolidSet
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketches should be extruded | Yes |
+| `sketchSet` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketches should be extruded | Yes |
 | `length` | `number` | How far to extrude the given sketches | Yes |
 
 ### Returns

docs/kcl/floor.md

@@ -25,7 +25,7 @@ floor(num: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/ft.md

@@ -26,7 +26,7 @@ ft() -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/helix.md

@@ -9,7 +9,7 @@ Create a helix.
 
 
 ```js
-helix(revolutions: number, angle_start: number, ccw?: bool, radius: number, axis: Axis3dOrEdgeReference, length?: number) -> HelixValue
+helix(revolutions: number, angleStart: number, ccw?: bool, radius: number, axis: Axis3dOrEdgeReference, length?: number) -> HelixValue
 ```
 
 
@@ -18,7 +18,7 @@ helix(revolutions: number, angle_start: number, ccw?: bool, radius: number, axis
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `revolutions` | `number` | Number of revolutions. | Yes |
-| `angle_start` | `number` | Start angle (in degrees). | Yes |
+| `angleStart` | `number` | Start angle (in degrees). | Yes |
 | `ccw` | `bool` | Is the helix rotation counter clockwise? The default is `false`. | No |
 | `radius` | `number` | Radius of the helix. | Yes |
 | `axis` | [`Axis3dOrEdgeReference`](/docs/kcl/types/Axis3dOrEdgeReference) | Axis to use for the helix. | Yes |
@@ -82,11 +82,11 @@ helixPath = helix(
   length = 10,
   radius = 5,
   axis = {
-  custom = {
-    axis = [0, 0, 1.0],
-    origin = [0, 0.25, 0]
-  }
-},
+    custom = {
+      axis = [0, 0, 1.0],
+      origin = [0, 0.25, 0]
+    }
+  },
 )
 
 // Create a spring by sweeping around the helix path.

docs/kcl/hole.md

@@ -9,7 +9,7 @@ Use a 2-dimensional sketch to cut a hole in another 2-dimensional sketch.
 
 
 ```js
-hole(hole_sketch: SketchSet, sketch: Sketch) -> Sketch
+hole(holeSketch: SketchSet, sketch: Sketch) -> Sketch
 ```
 
 
@@ -17,7 +17,7 @@ hole(hole_sketch: SketchSet, sketch: Sketch) -> Sketch
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `hole_sketch` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
+| `holeSketch` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
 | `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
 
 ### Returns

docs/kcl/import.md

@@ -15,7 +15,7 @@ For formats lacking unit data (such as STL, OBJ, or PLY files), the default unit
 Note: The import command currently only works when using the native Modeling App.
 
 ```js
-import(file_path: String, options?: ImportFormat) -> ImportedGeometry
+import(filePath: String, options?: ImportFormat) -> ImportedGeometry
 ```
 
 
@@ -23,7 +23,7 @@ import(file_path: String, options?: ImportFormat) -> ImportedGeometry
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `file_path` | `String` |  | Yes |
+| `filePath` | `String` |  | Yes |
 | `options` | [`ImportFormat`](/docs/kcl/types/ImportFormat) | Import format specifier | No |
 
 ### Returns

docs/kcl/inch.md

@@ -26,7 +26,7 @@ inch() -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/index.md

@@ -9,110 +9,116 @@ layout: manual
 * [Types](kcl/types)
 * [Modules](kcl/modules)
 * [Known Issues](kcl/KNOWN-ISSUES)
-* [`abs`](kcl/abs)
-* [`acos`](kcl/acos)
-* [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
-* [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
-* [`angledLine`](kcl/angledLine)
-* [`angledLineOfXLength`](kcl/angledLineOfXLength)
-* [`angledLineOfYLength`](kcl/angledLineOfYLength)
-* [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
-* [`angledLineToX`](kcl/angledLineToX)
-* [`angledLineToY`](kcl/angledLineToY)
-* [`appearance`](kcl/appearance)
-* [`arc`](kcl/arc)
-* [`arcTo`](kcl/arcTo)
-* [`asin`](kcl/asin)
-* [`assert`](kcl/assert)
-* [`assertEqual`](kcl/assertEqual)
-* [`assertGreaterThan`](kcl/assertGreaterThan)
-* [`assertGreaterThanOrEq`](kcl/assertGreaterThanOrEq)
-* [`assertLessThan`](kcl/assertLessThan)
-* [`assertLessThanOrEq`](kcl/assertLessThanOrEq)
-* [`atan`](kcl/atan)
-* [`atan2`](kcl/atan2)
-* [`bezierCurve`](kcl/bezierCurve)
-* [`ceil`](kcl/ceil)
-* [`chamfer`](kcl/chamfer)
-* [`circle`](kcl/circle)
-* [`circleThreePoint`](kcl/circleThreePoint)
-* [`close`](kcl/close)
-* [`cm`](kcl/cm)
-* [`cos`](kcl/cos)
-* [`e`](kcl/e)
-* [`extrude`](kcl/extrude)
-* [`fillet`](kcl/fillet)
-* [`floor`](kcl/floor)
-* [`ft`](kcl/ft)
-* [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
-* [`getOppositeEdge`](kcl/getOppositeEdge)
-* [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
-* [`helix`](kcl/helix)
-* [`helixRevolutions`](kcl/helixRevolutions)
-* [`hole`](kcl/hole)
-* [`hollow`](kcl/hollow)
-* [`inch`](kcl/inch)
-* [`lastSegX`](kcl/lastSegX)
-* [`lastSegY`](kcl/lastSegY)
-* [`legAngX`](kcl/legAngX)
-* [`legAngY`](kcl/legAngY)
-* [`legLen`](kcl/legLen)
-* [`line`](kcl/line)
-* [`ln`](kcl/ln)
-* [`loft`](kcl/loft)
-* [`log`](kcl/log)
-* [`log10`](kcl/log10)
-* [`log2`](kcl/log2)
-* [`m`](kcl/m)
-* [`map`](kcl/map)
-* [`max`](kcl/max)
-* [`min`](kcl/min)
-* [`mirror2d`](kcl/mirror2d)
-* [`mm`](kcl/mm)
-* [`offsetPlane`](kcl/offsetPlane)
-* [`patternCircular2d`](kcl/patternCircular2d)
-* [`patternCircular3d`](kcl/patternCircular3d)
-* [`patternLinear2d`](kcl/patternLinear2d)
-* [`patternLinear3d`](kcl/patternLinear3d)
-* [`patternTransform`](kcl/patternTransform)
-* [`patternTransform2d`](kcl/patternTransform2d)
-* [`pi`](kcl/pi)
-* [`polar`](kcl/polar)
-* [`polygon`](kcl/polygon)
-* [`pop`](kcl/pop)
-* [`pow`](kcl/pow)
-* [`profileStart`](kcl/profileStart)
-* [`profileStartX`](kcl/profileStartX)
-* [`profileStartY`](kcl/profileStartY)
-* [`push`](kcl/push)
-* [`reduce`](kcl/reduce)
-* [`rem`](kcl/rem)
-* [`revolve`](kcl/revolve)
-* [`round`](kcl/round)
-* [`segAng`](kcl/segAng)
-* [`segEnd`](kcl/segEnd)
-* [`segEndX`](kcl/segEndX)
-* [`segEndY`](kcl/segEndY)
-* [`segLen`](kcl/segLen)
-* [`segStart`](kcl/segStart)
-* [`segStartX`](kcl/segStartX)
-* [`segStartY`](kcl/segStartY)
-* [`shell`](kcl/shell)
-* [`sin`](kcl/sin)
-* [`sqrt`](kcl/sqrt)
-* [`startProfileAt`](kcl/startProfileAt)
-* [`startSketchOn`](kcl/startSketchOn)
-* [`sweep`](kcl/sweep)
-* [`tan`](kcl/tan)
-* [`tangentToEnd`](kcl/tangentToEnd)
-* [`tangentialArc`](kcl/tangentialArc)
-* [`tangentialArcTo`](kcl/tangentialArcTo)
-* [`tangentialArcToRelative`](kcl/tangentialArcToRelative)
-* [`tau`](kcl/tau)
-* [`toDegrees`](kcl/toDegrees)
-* [`toRadians`](kcl/toRadians)
-* [`xLine`](kcl/xLine)
-* [`xLineTo`](kcl/xLineTo)
-* [`yLine`](kcl/yLine)
-* [`yLineTo`](kcl/yLineTo)
-* [`yd`](kcl/yd)
+* **`std`**
+  * [`HALF_TURN`](kcl/const_std-HALF_TURN)
+  * [`QUARTER_TURN`](kcl/const_std-QUARTER_TURN)
+  * [`THREE_QUARTER_TURN`](kcl/const_std-THREE_QUARTER_TURN)
+  * [`ZERO`](kcl/const_std-ZERO)
+  * [`abs`](kcl/abs)
+  * [`acos`](kcl/acos)
+  * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
+  * [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
+  * [`angledLine`](kcl/angledLine)
+  * [`angledLineOfXLength`](kcl/angledLineOfXLength)
+  * [`angledLineOfYLength`](kcl/angledLineOfYLength)
+  * [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
+  * [`angledLineToX`](kcl/angledLineToX)
+  * [`angledLineToY`](kcl/angledLineToY)
+  * [`appearance`](kcl/appearance)
+  * [`arc`](kcl/arc)
+  * [`arcTo`](kcl/arcTo)
+  * [`asin`](kcl/asin)
+  * [`assert`](kcl/assert)
+  * [`assertEqual`](kcl/assertEqual)
+  * [`assertGreaterThan`](kcl/assertGreaterThan)
+  * [`assertGreaterThanOrEq`](kcl/assertGreaterThanOrEq)
+  * [`assertLessThan`](kcl/assertLessThan)
+  * [`assertLessThanOrEq`](kcl/assertLessThanOrEq)
+  * [`atan`](kcl/atan)
+  * [`atan2`](kcl/atan2)
+  * [`bezierCurve`](kcl/bezierCurve)
+  * [`ceil`](kcl/ceil)
+  * [`chamfer`](kcl/chamfer)
+  * [`circle`](kcl/circle)
+  * [`circleThreePoint`](kcl/circleThreePoint)
+  * [`close`](kcl/close)
+  * [`cm`](kcl/cm)
+  * [`extrude`](kcl/extrude)
+  * [`fillet`](kcl/fillet)
+  * [`floor`](kcl/floor)
+  * [`ft`](kcl/ft)
+  * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
+  * [`getOppositeEdge`](kcl/getOppositeEdge)
+  * [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
+  * [`helix`](kcl/helix)
+  * [`helixRevolutions`](kcl/helixRevolutions)
+  * [`hole`](kcl/hole)
+  * [`hollow`](kcl/hollow)
+  * [`inch`](kcl/inch)
+  * [`lastSegX`](kcl/lastSegX)
+  * [`lastSegY`](kcl/lastSegY)
+  * [`legAngX`](kcl/legAngX)
+  * [`legAngY`](kcl/legAngY)
+  * [`legLen`](kcl/legLen)
+  * [`line`](kcl/line)
+  * [`ln`](kcl/ln)
+  * [`loft`](kcl/loft)
+  * [`log`](kcl/log)
+  * [`log10`](kcl/log10)
+  * [`log2`](kcl/log2)
+  * [`m`](kcl/m)
+  * [`map`](kcl/map)
+  * [`max`](kcl/max)
+  * [`min`](kcl/min)
+  * [`mirror2d`](kcl/mirror2d)
+  * [`mm`](kcl/mm)
+  * [`offsetPlane`](kcl/offsetPlane)
+  * [`patternCircular2d`](kcl/patternCircular2d)
+  * [`patternCircular3d`](kcl/patternCircular3d)
+  * [`patternLinear2d`](kcl/patternLinear2d)
+  * [`patternLinear3d`](kcl/patternLinear3d)
+  * [`patternTransform`](kcl/patternTransform)
+  * [`patternTransform2d`](kcl/patternTransform2d)
+  * [`polar`](kcl/polar)
+  * [`polygon`](kcl/polygon)
+  * [`pop`](kcl/pop)
+  * [`pow`](kcl/pow)
+  * [`profileStart`](kcl/profileStart)
+  * [`profileStartX`](kcl/profileStartX)
+  * [`profileStartY`](kcl/profileStartY)
+  * [`push`](kcl/push)
+  * [`reduce`](kcl/reduce)
+  * [`rem`](kcl/rem)
+  * [`revolve`](kcl/revolve)
+  * [`round`](kcl/round)
+  * [`segAng`](kcl/segAng)
+  * [`segEnd`](kcl/segEnd)
+  * [`segEndX`](kcl/segEndX)
+  * [`segEndY`](kcl/segEndY)
+  * [`segLen`](kcl/segLen)
+  * [`segStart`](kcl/segStart)
+  * [`segStartX`](kcl/segStartX)
+  * [`segStartY`](kcl/segStartY)
+  * [`shell`](kcl/shell)
+  * [`sqrt`](kcl/sqrt)
+  * [`startProfileAt`](kcl/startProfileAt)
+  * [`startSketchOn`](kcl/startSketchOn)
+  * [`sweep`](kcl/sweep)
+  * [`tangentToEnd`](kcl/tangentToEnd)
+  * [`tangentialArc`](kcl/tangentialArc)
+  * [`tangentialArcTo`](kcl/tangentialArcTo)
+  * [`tangentialArcToRelative`](kcl/tangentialArcToRelative)
+  * [`toDegrees`](kcl/toDegrees)
+  * [`toRadians`](kcl/toRadians)
+  * [`xLine`](kcl/xLine)
+  * [`xLineTo`](kcl/xLineTo)
+  * [`yLine`](kcl/yLine)
+  * [`yLineTo`](kcl/yLineTo)
+  * [`yd`](kcl/yd)
+* **`std::math`**
+  * [`E`](kcl/const_std-math-E)
+  * [`PI`](kcl/const_std-math-PI)
+  * [`TAU`](kcl/const_std-math-TAU)
+  * [`cos`](kcl/std-math-cos)
+  * [`sin`](kcl/std-math-sin)
+  * [`tan`](kcl/std-math-tan)

docs/kcl/lastSegX.md

@@ -21,7 +21,7 @@ lastSegX(sketch: Sketch) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/lastSegY.md

@@ -21,7 +21,7 @@ lastSegY(sketch: Sketch) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/legAngX.md

@@ -26,7 +26,7 @@ legAngX(hypotenuse: number, leg: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/legAngY.md

@@ -26,7 +26,7 @@ legAngY(hypotenuse: number, leg: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/legLen.md

@@ -26,7 +26,7 @@ legLen(hypotenuse: number, leg: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/line.md

@@ -9,7 +9,7 @@ Extend the current sketch with a new straight line.
 
 
 ```js
-line(sketch: Sketch, end_absolute?: [number], end?: [number], tag?: TagDeclarator) -> Sketch
+line(sketch: Sketch, endAbsolute?: [number], end?: [number], tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -18,7 +18,7 @@ line(sketch: Sketch, end_absolute?: [number], end?: [number], tag?: TagDeclarato
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | Which sketch should this path be added to? | Yes |
-| `end_absolute` | `[number]` | Which absolute point should this line go to? Incompatible with `end`. | No |
+| `endAbsolute` | `[number]` | Which absolute point should this line go to? Incompatible with `end`. | No |
 | `end` | `[number]` | How far away (along the X and Y axes) should this line go? Incompatible with `endAbsolute`. | No |
 | `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 

docs/kcl/ln.md

@@ -25,7 +25,7 @@ ln(num: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/loft.md

@@ -9,7 +9,7 @@ Create a 3D surface or solid by interpolating between two or more sketches.
 The sketches need to closed and on the same plane.
 
 ```js
-loft(sketches: [Sketch], v_degree: NonZeroU32, bez_approximate_rational: bool, base_curve_index?: integer, tolerance?: number) -> Solid
+loft(sketches: [Sketch], vDegree: NonZeroU32, bezApproximateRational: bool, baseCurveIndex?: integer, tolerance?: number) -> Solid
 ```
 
 
@@ -18,9 +18,9 @@ loft(sketches: [Sketch], v_degree: NonZeroU32, bez_approximate_rational: bool, b
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `sketches` | [`[Sketch]`](/docs/kcl/types/Sketch) | Which sketches to loft. Must include at least 2 sketches. | Yes |
-| `v_degree` | `NonZeroU32` | Degree of the interpolation. Must be greater than zero. For example, use 2 for quadratic, or 3 for cubic interpolation in the V direction. This defaults to 2, if not specified. | Yes |
-| `bez_approximate_rational` | `bool` | Attempt to approximate rational curves (such as arcs) using a bezier. This will remove banding around interpolations between arcs and non-arcs. It may produce errors in other scenarios Over time, this field won't be necessary. | Yes |
-| `base_curve_index` | `integer` | This can be set to override the automatically determined topological base curve, which is usually the first section encountered. | No |
+| `vDegree` | `NonZeroU32` | Degree of the interpolation. Must be greater than zero. For example, use 2 for quadratic, or 3 for cubic interpolation in the V direction. This defaults to 2, if not specified. | Yes |
+| `bezApproximateRational` | `bool` | Attempt to approximate rational curves (such as arcs) using a bezier. This will remove banding around interpolations between arcs and non-arcs. It may produce errors in other scenarios Over time, this field won't be necessary. | Yes |
+| `baseCurveIndex` | `integer` | This can be set to override the automatically determined topological base curve, which is usually the first section encountered. | No |
 | `tolerance` | `number` | Tolerance for the loft operation. | No |
 
 ### Returns
@@ -95,10 +95,10 @@ circleSketch1 = startSketchOn(offsetPlane('XY', offset = 150))
 
 loft(
   [
-  squareSketch,
-  circleSketch0,
-  circleSketch1
-],
+    squareSketch,
+    circleSketch0,
+    circleSketch1
+  ],
   baseCurveIndex = 0,
   bezApproximateRational = false,
   tolerance = 0.000001,

docs/kcl/log.md

@@ -26,7 +26,7 @@ log(num: number, base: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/log10.md

@@ -25,7 +25,7 @@ log10(num: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/log2.md

@@ -25,7 +25,7 @@ log2(num: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/m.md

@@ -26,7 +26,7 @@ m() -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/map.md

@@ -9,7 +9,7 @@ Apply a function to every element of a list.
 Given a list like `[a, b, c]`, and a function like `f`, returns `[f(a), f(b), f(c)]`
 
 ```js
-map(array: [KclValue], map_fn: FunctionParam) -> [KclValue]
+map(array: [KclValue], mapFn: FunctionSource) -> [KclValue]
 ```
 
 
@@ -18,11 +18,11 @@ map(array: [KclValue], map_fn: FunctionParam) -> [KclValue]
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `array` | [`[KclValue]`](/docs/kcl/types/KclValue) |  | Yes |
-| `map_fn` | `FunctionParam` |  | Yes |
+| `mapFn` | `FunctionSource` |  | Yes |
 
 ### Returns
 
-[`[KclValue]`](/docs/kcl/types/KclValue) 
+[`[KclValue]`](/docs/kcl/types/KclValue)
 
 
 ### Examples

docs/kcl/max.md

@@ -25,7 +25,7 @@ max(args: [number]) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/min.md

@@ -25,7 +25,7 @@ min(args: [number]) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/mirror2d.md

@@ -11,7 +11,7 @@ Only works on unclosed sketches for now.
 Mirror occurs around a local sketch axis rather than a global axis.
 
 ```js
-mirror2d(data: Mirror2dData, sketch_set: SketchSet) -> [Sketch]
+mirror2d(data: Mirror2dData, sketchSet: SketchSet) -> [Sketch]
 ```
 
 
@@ -20,11 +20,11 @@ mirror2d(data: Mirror2dData, sketch_set: SketchSet) -> [Sketch]
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `data` | [`Mirror2dData`](/docs/kcl/types/Mirror2dData) | Data for a mirror. | Yes |
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
+| `sketchSet` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
 
 ### Returns
 
-[`[Sketch]`](/docs/kcl/types/Sketch) 
+[`[Sketch]`](/docs/kcl/types/Sketch)
 
 
 ### Examples

docs/kcl/mm.md

@@ -26,7 +26,7 @@ mm() -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/patternCircular2d.md

@@ -9,7 +9,7 @@ Repeat a 2-dimensional sketch some number of times along a partial or
 complete circle some specified number of times. Each object may additionally be rotated along the circle, ensuring orentation of the solid with respect to the center of the circle is maintained.
 
 ```js
-patternCircular2d(sketch_set: SketchSet, instances: integer, center: [number], arc_degrees: number, rotate_duplicates: bool, use_original?: bool) -> [Sketch]
+patternCircular2d(sketchSet: SketchSet, instances: integer, center: [number], arcDegrees: number, rotateDuplicates: bool, useOriginal?: bool) -> [Sketch]
 ```
 
 
@@ -17,16 +17,16 @@ patternCircular2d(sketch_set: SketchSet, instances: integer, center: [number], a
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketch(es) to pattern | Yes |
+| `sketchSet` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketch(es) to pattern | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `center` | `[number]` | The center about which to make the pattern. This is a 2D vector. | Yes |
-| `arc_degrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
-| `rotate_duplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `arcDegrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
+| `rotateDuplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 
-[`[Sketch]`](/docs/kcl/types/Sketch) 
+[`[Sketch]`](/docs/kcl/types/Sketch)
 
 
 ### Examples

docs/kcl/patternCircular3d.md

@@ -9,7 +9,7 @@ Repeat a 3-dimensional solid some number of times along a partial or
 complete circle some specified number of times. Each object may additionally be rotated along the circle, ensuring orentation of the solid with respect to the center of the circle is maintained.
 
 ```js
-patternCircular3d(solid_set: SolidSet, instances: integer, axis: [number], center: [number], arc_degrees: number, rotate_duplicates: bool, use_original?: bool) -> [Solid]
+patternCircular3d(solidSet: SolidSet, instances: integer, axis: [number], center: [number], arcDegrees: number, rotateDuplicates: bool, useOriginal?: bool) -> [Solid]
 ```
 
 
@@ -17,17 +17,17 @@ patternCircular3d(solid_set: SolidSet, instances: integer, axis: [number], cente
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid_set` | [`SolidSet`](/docs/kcl/types/SolidSet) | Which solid(s) to pattern | Yes |
+| `solidSet` | [`SolidSet`](/docs/kcl/types/SolidSet) | Which solid(s) to pattern | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `axis` | `[number]` | The axis around which to make the pattern. This is a 3D vector | Yes |
 | `center` | `[number]` | The center about which to make the pattern. This is a 3D vector. | Yes |
-| `arc_degrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
-| `rotate_duplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `arcDegrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
+| `rotateDuplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 
-[`[Solid]`](/docs/kcl/types/Solid) 
+[`[Solid]`](/docs/kcl/types/Solid)
 
 
 ### Examples

docs/kcl/patternLinear2d.md

@@ -9,7 +9,7 @@ Repeat a 2-dimensional sketch along some dimension, with a dynamic amount
 of distance between each repetition, some specified number of times.
 
 ```js
-patternLinear2d(sketch_set: SketchSet, instances: integer, distance: number, axis: [number], use_original?: bool) -> [Sketch]
+patternLinear2d(sketchSet: SketchSet, instances: integer, distance: number, axis: [number], useOriginal?: bool) -> [Sketch]
 ```
 
 
@@ -17,15 +17,15 @@ patternLinear2d(sketch_set: SketchSet, instances: integer, distance: number, axi
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | The sketch(es) to duplicate | Yes |
+| `sketchSet` | [`SketchSet`](/docs/kcl/types/SketchSet) | The sketch(es) to duplicate | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `distance` | `number` | Distance between each repetition. Also known as 'spacing'. | Yes |
 | `axis` | `[number]` | The axis of the pattern. A 2D vector. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 
-[`[Sketch]`](/docs/kcl/types/Sketch) 
+[`[Sketch]`](/docs/kcl/types/Sketch)
 
 
 ### Examples

docs/kcl/patternLinear3d.md

@@ -9,7 +9,7 @@ Repeat a 3-dimensional solid along a linear path, with a dynamic amount
 of distance between each repetition, some specified number of times.
 
 ```js
-patternLinear3d(solid_set: SolidSet, instances: integer, distance: number, axis: [number], use_original?: bool) -> [Solid]
+patternLinear3d(solidSet: SolidSet, instances: integer, distance: number, axis: [number], useOriginal?: bool) -> [Solid]
 ```
 
 
@@ -17,15 +17,15 @@ patternLinear3d(solid_set: SolidSet, instances: integer, distance: number, axis:
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid_set` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) to duplicate | Yes |
+| `solidSet` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) to duplicate | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `distance` | `number` | Distance between each repetition. Also known as 'spacing'. | Yes |
 | `axis` | `[number]` | The axis of the pattern. A 2D vector. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 
-[`[Solid]`](/docs/kcl/types/Solid) 
+[`[Solid]`](/docs/kcl/types/Solid)
 
 
 ### Examples

docs/kcl/patternTransform.md

@@ -35,7 +35,7 @@ The transform function returns a transform object. All properties of the object
    - `rotation.origin` (either "local" i.e. rotate around its own center, "global" i.e. rotate around the scene's center, or a 3D point, defaults to "local")
 
 ```js
-patternTransform(solid_set: SolidSet, instances: integer, transform: FunctionParam, use_original?: bool) -> [Solid]
+patternTransform(solidSet: SolidSet, instances: integer, transform: FunctionSource, useOriginal?: bool) -> [Solid]
 ```
 
 
@@ -43,14 +43,14 @@ patternTransform(solid_set: SolidSet, instances: integer, transform: FunctionPar
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid_set` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) to duplicate | Yes |
+| `solidSet` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) to duplicate | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
-| `transform` | `FunctionParam` | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `transform` | `FunctionSource` | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 
-[`[Solid]`](/docs/kcl/types/Solid) 
+[`[Solid]`](/docs/kcl/types/Solid)
 
 
 ### Examples

docs/kcl/patternTransform2d.md

@@ -9,7 +9,7 @@ Just like patternTransform, but works on 2D sketches not 3D solids.
 
 
 ```js
-patternTransform2d(sketch_set: SketchSet, instances: integer, transform: FunctionParam, use_original?: bool) -> [Sketch]
+patternTransform2d(sketchSet: SketchSet, instances: integer, transform: FunctionSource, useOriginal?: bool) -> [Sketch]
 ```
 
 
@@ -17,14 +17,14 @@ patternTransform2d(sketch_set: SketchSet, instances: integer, transform: Functio
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | The sketch(es) to duplicate | Yes |
+| `sketchSet` | [`SketchSet`](/docs/kcl/types/SketchSet) | The sketch(es) to duplicate | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
-| `transform` | `FunctionParam` | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `transform` | `FunctionSource` | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 
-[`[Sketch]`](/docs/kcl/types/Sketch) 
+[`[Sketch]`](/docs/kcl/types/Sketch)
 
 
 ### Examples

docs/kcl/pi.md

@@ -4,9 +4,11 @@ excerpt: "Return the value of `pi`. Archimedes’ constant (π)."
 layout: manual
 ---
 
+**WARNING:** This function is deprecated.
+
 Return the value of `pi`. Archimedes’ constant (π).
 
-
+**DEPRECATED** use the constant PI
 
 ```js
 pi() -> number
@@ -20,7 +22,7 @@ pi() -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/polar.md

@@ -21,7 +21,7 @@ polar(data: PolarCoordsData) -> [number]
 
 ### Returns
 
-`[number]` 
+`[number]`
 
 
 ### Examples

docs/kcl/polygon.md

@@ -9,7 +9,7 @@ Create a regular polygon with the specified number of sides that is either inscr
 
 
 ```js
-polygon(data: PolygonData, sketch_surface_or_group: SketchOrSurface, tag?: TagDeclarator) -> Sketch
+polygon(data: PolygonData, sketchSurfaceOrGroup: SketchOrSurface, tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -18,7 +18,7 @@ polygon(data: PolygonData, sketch_surface_or_group: SketchOrSurface, tag?: TagDe
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `data` | [`PolygonData`](/docs/kcl/types/PolygonData) | Data for drawing a polygon | Yes |
-| `sketch_surface_or_group` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | A sketch surface or a sketch. | Yes |
+| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | A sketch surface or a sketch. | Yes |
 | `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
 
 ### Returns

docs/kcl/pow.md

@@ -26,7 +26,7 @@ pow(num: number, pow: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/profileStart.md

@@ -21,7 +21,7 @@ profileStart(sketch: Sketch) -> [number]
 
 ### Returns
 
-`[number]` 
+`[number]`
 
 
 ### Examples

docs/kcl/profileStartX.md

@@ -21,7 +21,7 @@ profileStartX(sketch: Sketch) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/profileStartY.md

@@ -21,7 +21,7 @@ profileStartY(sketch: Sketch) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/reduce.md

@@ -9,7 +9,7 @@ Take a starting value. Then, for each element of an array, calculate the next va
 using the previous value and the element.
 
 ```js
-reduce(array: [KclValue], start: KclValue, reduce_fn: FunctionParam) -> KclValue
+reduce(array: [KclValue], start: KclValue, reduceFn: FunctionSource) -> KclValue
 ```
 
 
@@ -19,7 +19,7 @@ reduce(array: [KclValue], start: KclValue, reduce_fn: FunctionParam) -> KclValue
 |----------|------|-------------|----------|
 | `array` | [`[KclValue]`](/docs/kcl/types/KclValue) |  | Yes |
 | `start` | [`KclValue`](/docs/kcl/types/KclValue) | Any KCL value. | Yes |
-| `reduce_fn` | `FunctionParam` |  | Yes |
+| `reduceFn` | `FunctionSource` |  | Yes |
 
 ### Returns
 
@@ -76,7 +76,7 @@ assertEqual(sum, 6, 0.00001, "1 + 2 + 3 summed is 6")
 // Declare a function that sketches a decagon.
 fn decagon(radius) {
   // Each side of the decagon is turned this many degrees from the previous angle.
-  stepAngle = 1 / 10 * tau()
+  stepAngle = 1 / 10 * TAU
 
   // Start the decagon sketch at this point.
   startOfDecagonSketch = startSketchOn('XY')
@@ -97,7 +97,7 @@ fn decagon(radius) {
 
 /* The `decagon` above is basically like this pseudo-code:
 fn decagon(radius):
-    stepAngle = (1/10) * tau()
+    stepAngle = (1/10) * TAU
     plane = startSketchOn('XY')
     startOfDecagonSketch = startProfileAt([(cos(0)*radius), (sin(0) * radius)], plane)
 

docs/kcl/rem.md

@@ -26,7 +26,7 @@ rem(num: number, divisor: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/round.md

@@ -25,7 +25,7 @@ round(num: number) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/segAng.md

@@ -21,7 +21,7 @@ segAng(tag: TagIdentifier) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/segEnd.md

@@ -21,7 +21,7 @@ segEnd(tag: TagIdentifier) -> [number]
 
 ### Returns
 
-`[number]` 
+`[number]`
 
 
 ### Examples

docs/kcl/segEndX.md

@@ -21,7 +21,7 @@ segEndX(tag: TagIdentifier) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/segEndY.md

@@ -21,7 +21,7 @@ segEndY(tag: TagIdentifier) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples

docs/kcl/segLen.md

@@ -21,7 +21,7 @@ segLen(tag: TagIdentifier) -> number
 
 ### Returns
 
-`number` 
+`number`
 
 
 ### Examples