Adjust expected segment overlay counts

.github/workflows/build-apps.yml

@@ -123,6 +123,18 @@ jobs:
       - id: export_notes
         run: echo "notes=`cat release-notes.md`" >> "$GITHUB_OUTPUT"
 
+      - name: Prepare electron-builder.yml file for updater test
+        if: ${{ env.IS_RELEASE == 'true' }}
+        run: |
+          yq -i '.publish[0].url = "https://dl.zoo.dev/releases/modeling-app/updater-test"' electron-builder.yml
+
+      - uses: actions/upload-artifact@v4
+        if: ${{ env.IS_RELEASE == 'true' }}
+        with:
+          name: prepared-files-updater-test
+          path: |
+            electron-builder.yml
+
 
   build-apps:
     needs: [prepare-files]
@@ -247,6 +259,49 @@ jobs:
 
       # TODO: add the 'Build for Mac TestFlight (nightly)' stage back
 
+      # The steps below are for updater-test builds, only on release
+
+      - uses: actions/download-artifact@v4
+        if: ${{ env.IS_RELEASE == 'true' }}
+        name: prepared-files-updater-test
+
+      - name: Copy updated electron-builder.yml file for updater test
+        if: ${{ env.IS_RELEASE == 'true' }}
+        run: |
+          ls -R prepared-files-updater-test
+          cp prepared-files-updater-test/electron-builder.yml electron-builder.yml
+
+      - name: Build the app (updater-test)
+        if: ${{ env.IS_RELEASE == 'true' }}
+        env:
+          APPLE_ID: ${{ secrets.APPLE_ID }}
+          APPLE_PASSWORD: ${{ secrets.APPLE_PASSWORD }}
+          APPLE_APP_SPECIFIC_PASSWORD: ${{ secrets.APPLE_PASSWORD }}
+          APPLE_TEAM_ID: ${{ secrets.APPLE_TEAM_ID }}
+          CSC_LINK: ${{ secrets.APPLE_CERTIFICATE }}
+          CSC_KEY_PASSWORD: ${{ secrets.APPLE_CERTIFICATE_PASSWORD }}
+          CSC_KEYCHAIN: ${{ secrets.APPLE_SIGNING_IDENTITY }}
+          WINDOWS_CERTIFICATE_THUMBPRINT: ${{ secrets.WINDOWS_CERTIFICATE_THUMBPRINT }}
+        run: npm run tronb:package:prod
+
+      - uses: actions/upload-artifact@v4
+        if: ${{ env.IS_RELEASE == 'true' }}
+        with:
+          name: updater-test-arm64-${{ matrix.platform }}
+          path: |
+            out/*-arm64-win.exe
+            out/*-arm64-mac.dmg
+            out/*-arm64-linux.AppImage
+
+      - uses: actions/upload-artifact@v4
+        if: ${{ env.IS_RELEASE == 'true' }}
+        with:
+          name: updater-test-x64-${{ matrix.platform }}
+          path: |
+            out/*-x64-win.exe
+            out/*-x64-mac.dmg
+            out/*-x86_64-linux.AppImage
+
 
   upload-apps-release:
     runs-on: ubuntu-22.04

.github/workflows/e2e-tests.yml

@@ -40,7 +40,7 @@ jobs:
       - name: Install dependencies
         run: npm install
 
-      - name: Download Wasm cache
+      - name: Download Wasm Cache
         id: download-wasm
         if: ${{ github.event_name != 'schedule' && steps.filter.outputs.rust == 'false' }}
         uses: dawidd6/action-download-artifact@v7
@@ -52,7 +52,7 @@ jobs:
           branch: main
           path: rust/kcl-wasm-lib/pkg
 
-      - name: Build Wasm condition
+      - name: Build WASM condition
         id: wasm
         run: |
           set -euox pipefail
@@ -70,7 +70,7 @@ jobs:
         run: |
           [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
 
-      - name: Install Rust
+      - name: Install rust
         if: ${{ steps.wasm.outputs.should-build-wasm == 'true' }}
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
@@ -81,7 +81,7 @@ jobs:
         with:
           tool: wasm-pack
 
-      - name: Use Rust cache
+      - name: Rust Cache
         if: ${{ steps.wasm.outputs.should-build-wasm == 'true' }}
         uses: Swatinem/rust-cache@v2
         with:
@@ -117,7 +117,7 @@ jobs:
       - uses: actions/download-artifact@v4
         name: prepared-wasm
 
-      - name: Copy prepared Wasm
+      - name: Copy prepared wasm
         run: |
           ls -R prepared-wasm
           cp prepared-wasm/kcl_wasm_lib_bg.wasm public
@@ -133,17 +133,20 @@ jobs:
         id: deps-install
         run: npm install
 
-      - name: Cache browsers
+      - name: Cache Playwright Browsers
         uses: actions/cache@v4
         with:
           path: |
             ~/.cache/ms-playwright/
           key: ${{ runner.os }}-playwright-${{ hashFiles('package-lock.json') }}
 
-      - name: Install browsers
+      - name: Install Playwright Browsers
         run: npm run playwright install --with-deps
 
-      - name: Capture snapshots
+      - name: build web
+        run: npm run tronb:vite:dev
+
+      - name: Run ubuntu/chrome snapshots
         uses: nick-fields/retry@v3.0.2
         with:
           shell: bash
@@ -167,7 +170,7 @@ jobs:
           retention-days: 30
           overwrite: true
 
-      - name: Check diff
+      - name: Check for changes
         if: ${{ github.ref != 'refs/heads/main' }}
         shell: bash
         id: git-check
@@ -178,8 +181,9 @@ jobs:
             else echo "modified=false" >> $GITHUB_OUTPUT
             fi
 
-      - name: Commit changes
-        if: ${{ steps.git-check.outputs.modified == 'true' }}
+      - name: Commit changes, if any
+        # TODO: find a more reliable way to detect visual changes
+        if: ${{ false && steps.git-check.outputs.modified == 'true' }}
         shell: bash
         run: |
           git add e2e/playwright/snapshot-tests.spec.ts-snapshots e2e/playwright/snapshots
@@ -189,7 +193,7 @@ jobs:
           git fetch origin
           echo ${{ github.head_ref }}
           git checkout ${{ github.head_ref }}
-          git commit --message "Update snapshots" || true
+          git commit -m "A snapshot a day keeps the bugs away! 📷🐛" || true
           git push
           git push origin ${{ github.head_ref }}
 

CONTRIBUTING.md

@@ -130,7 +130,7 @@ git tag $VERSION
 git push origin --tags
 ```
 
-This will trigger the `build-apps` workflow, set the version, build & sign the apps, and generate release files.
+This will trigger the `build-apps` workflow, set the version, build & sign the apps, and generate release files as well as updater-test artifacts.
 
 The workflow should be listed right away [in this list](https://github.com/KittyCAD/modeling-app/actions/workflows/build-apps.yml?query=event%3Apush)).
 
@@ -142,10 +142,13 @@ The release builds can be found under the `out-{arch}-{platform}` zip files, at
 
 Manually test against this [list](https://github.com/KittyCAD/modeling-app/issues/3588) across Windows, MacOS, Linux and posting results as comments in the issue.
 
-A prompt should show up asking for a downgrade to the last release version. Running through that at the end of testing
-and making sure the current release candidate has the ability to be updated to what electron-updater points to is critical,
-but what is actually being downloaded and installed isn't.
-If the prompt doesn't show up, start the app in command line to grab the electron-updater logs. This is likely an issue with the current build that needs addressing.
+##### Updater-test builds
+
+The other `build-apps` output in the release `build-apps` workflow (triggered by 2.) is `updater-test-{arch}-{platform}`. It's a semi-automated process: for macOS, Windows, and Linux, download the corresponding updater-test artifact file, install the app, run it, expect an updater prompt to a dummy v0.255.255, install it and check that the app comes back at that version.
+
+The only difference with these builds is that they point to a different update location on the release bucket, with this dummy v0.255.255 always available. This helps ensuring that the version we release will be able to update to the next one available.
+
+If the prompt doesn't show up, start the app in command line to grab the electron-updater logs. This is likely an issue with the current build that needs addressing (or the updater-test location in the storage bucket).
 
 ```
 # Windows (PowerShell)

docs/kcl-std/angledLine.md

@@ -46,7 +46,7 @@ angledLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> yLine(endAbsolute = 15)
-  |> angledLine(angle = 30deg, length = 15)
+  |> angledLine(angle = 30, length = 15)
   |> line(end = [8, -10])
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl-std/angledLineThatIntersects.md

@@ -42,7 +42,7 @@ exampleSketch = startSketchOn(XZ)
   |> line(endAbsolute = [5, 10])
   |> line(endAbsolute = [-10, 10], tag = $lineToIntersect)
   |> line(endAbsolute = [0, 20])
-  |> angledLineThatIntersects(angle = 80deg, intersectTag = lineToIntersect, offset = 10)
+  |> angledLineThatIntersects(angle = 80, intersectTag = lineToIntersect, offset = 10)
   |> close()
 
 example = extrude(exampleSketch, length = 10)

docs/kcl-std/appearance.md

@@ -54,7 +54,7 @@ example = extrude(exampleSketch, length = 5)
 // Add color to a revolved solid.
 sketch001 = startSketchOn(XY)
   |> circle(center = [15, 0], radius = 5)
-  |> revolve(angle = 360deg, axis = Y)
+  |> revolve(angle = 360, axis = Y)
   |> appearance(color = '#ff0000', metalness = 90, roughness = 90)
 ```
 
@@ -171,7 +171,7 @@ exampleSketch = startSketchOn(XZ)
   |> patternCircular2d(
        center = [0, 0],
        instances = 13,
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        rotateDuplicates = true,
      )
 
@@ -188,9 +188,9 @@ example = extrude(exampleSketch, length = 1)
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90deg, radius = 5)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90deg, radius = 5)
+  |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
 
 pipeHole = startSketchOn(XY)

docs/kcl-std/arc.md

@@ -46,7 +46,7 @@ Unless this makes a lot of sense and feels like what you're looking for to const
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])
-  |> arc(angleStart = 0deg, angleEnd = 280deg, radius = 16)
+  |> arc(angleStart = 0, angleEnd = 280, radius = 16)
   |> close()
 example = extrude(exampleSketch, length = 10)
 ```

docs/kcl-std/consts/std-math-E.md

@@ -19,7 +19,7 @@ E: number = 2.71828182845904523536028747135266250_
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 30deg,
+    angle = 30,
     length = 2 * E ^ 2,
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/consts/std-math-TAU.md

@@ -19,7 +19,7 @@ TAU: number = 6.28318530717958647692528676655900577_
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50deg,
+    angle = 50,
     length = 10 * TAU,
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/consts/std-sweep-SKETCH_PLANE.md

@@ -1,16 +0,0 @@
----
-title: "sweep::SKETCH_PLANE"
-subtitle: "Constant in std::sweep"
-excerpt: "Local/relative to a position centered within the plane being sketched on"
-layout: manual
----
-
-Local/relative to a position centered within the plane being sketched on
-
-```kcl
-sweep::SKETCH_PLANE: string = 'sketchPlane'
-```
-
-
-
-

docs/kcl-std/consts/std-sweep-TRAJECTORY.md

@@ -1,16 +0,0 @@
----
-title: "sweep::TRAJECTORY"
-subtitle: "Constant in std::sweep"
-excerpt: "Local/relative to the trajectory curve"
-layout: manual
----
-
-Local/relative to the trajectory curve
-
-```kcl
-sweep::TRAJECTORY: string = 'trajectoryCurve'
-```
-
-
-
-

docs/kcl-std/extrude.md

@@ -42,7 +42,7 @@ You can provide more than one sketch to extrude, and they will all be extruded i
 example = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])
-  |> arc(angleStart = 120deg, angleEnd = 0deg, radius = 5)
+  |> arc(angleStart = 120, angleEnd = 0, radius = 5)
   |> line(end = [5, 0])
   |> line(end = [0, 10])
   |> bezierCurve(control1 = [-10, 0], control2 = [2, 10], end = [-5, 10])
@@ -56,7 +56,7 @@ example = startSketchOn(XZ)
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [-10, 0])
-  |> arc(angleStart = 120deg, angleEnd = -60deg, radius = 5)
+  |> arc(angleStart = 120, angleEnd = -60, radius = 5)
   |> line(end = [10, 0])
   |> line(end = [5, 0])
   |> bezierCurve(control1 = [-3, 0], control2 = [2, 10], end = [-5, 10])
@@ -72,7 +72,7 @@ example = extrude(exampleSketch, length = 10)
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [-10, 0])
-  |> arc(angleStart = 120deg, angleEnd = -60deg, radius = 5)
+  |> arc(angleStart = 120, angleEnd = -60, radius = 5)
   |> line(end = [10, 0])
   |> line(end = [5, 0])
   |> bezierCurve(control1 = [-3, 0], control2 = [2, 10], end = [-5, 10])
@@ -88,7 +88,7 @@ example = extrude(exampleSketch, length = 20, symmetric = true)
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [-10, 0])
-  |> arc(angleStart = 120deg, angleEnd = -60deg, radius = 5)
+  |> arc(angleStart = 120, angleEnd = -60, radius = 5)
   |> line(end = [10, 0])
   |> line(end = [5, 0])
   |> bezierCurve(control1 = [-3, 0], control2 = [2, 10], end = [-5, 10])

docs/kcl-std/functions/std-array-reduce.md

@@ -80,7 +80,7 @@ fn decagon(@radius) {
 
   // Start the decagon sketch at this point.
   startOfDecagonSketch = startSketchOn(XY)
-    |> startProfile(at = [(cos(0deg)*radius), (sin(0deg) * radius)])
+    |> startProfile(at = [(cos(0)*radius), (sin(0) * radius)])
 
   // Use a `reduce` to draw the remaining decagon sides.
   // For each number in the array 1..10, run the given function,

docs/kcl-std/functions/std-math-abs.md

@@ -27,7 +27,7 @@ abs(@input: number): number
 ### Examples
 
 ```kcl
-myAngle = -120deg
+myAngle = -120
 
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])

docs/kcl-std/functions/std-math-cos.md

@@ -30,7 +30,7 @@ cos(@num: number(Angle)): number(_)
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 30deg,
+    angle = 30,
     length = 3 / cos(30deg),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-math-max.md

@@ -30,7 +30,7 @@ max(@input: [number; 1+]): number
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 70deg,
+    angle = 70,
     length = max([15, 31, 4, 13, 22])
   )
   |> line(end = [20, 0])

docs/kcl-std/functions/std-math-min.md

@@ -30,7 +30,7 @@ min(@input: [number; 1+]): number
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 70deg,
+    angle = 70,
     length = min([15, 31, 4, 13, 22])
   )
   |> line(end = [20, 0])

docs/kcl-std/functions/std-math-polar.md

@@ -34,7 +34,7 @@ cartesian (x/y/z grid) coordinates.
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> line(end = polar(angle = 30deg, length = 5), tag = $thing)
+  |> line(end = polar(angle = 30, length = 5), tag = $thing)
   |> line(end = [0, 5])
   |> line(end = [segEndX(thing), 0])
   |> line(end = [-20, 10])

docs/kcl-std/functions/std-math-pow.md

@@ -34,7 +34,7 @@ pow(
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50deg,
+    angle = 50,
     length = pow(5, exp = 2),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-math-sin.md

@@ -30,7 +30,7 @@ sin(@num: number(Angle)): number(_)
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50deg,
+    angle = 50,
     length = 15 / sin(135deg),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-math-sqrt.md

@@ -30,7 +30,7 @@ sqrt(@input: number): number
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50deg,
+    angle = 50,
     length = sqrt(2500),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-math-tan.md

@@ -30,7 +30,7 @@ tan(@num: number(Angle)): number(_)
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50deg,
+    angle = 50,
     length = 50 * tan((1/2): number(rad)),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-units-toDegrees.md

@@ -30,7 +30,7 @@ units::toDegrees(@num: number(Angle)): number(deg)
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50deg,
+    angle = 50,
     length = 70 * cos(units::toDegrees((PI/4): number(rad))),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-units-toRadians.md

@@ -30,8 +30,8 @@ units::toRadians(@num: number(Angle)): number(rad)
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50deg,
-    length = 70 * cos(units::toRadians(45deg)),
+    angle = 50,
+    length = 70 * cos(units::toRadians(45)),
   )
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl-std/getNextAdjacentEdge.md

@@ -30,10 +30,10 @@ getNextAdjacentEdge(@edge: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])
-  |> angledLine(angle = 60deg, length = 10)
-  |> angledLine(angle = 120deg, length = 10)
+  |> angledLine(angle = 60, length = 10)
+  |> angledLine(angle = 120, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240deg, length = 10, tag = $referenceEdge)
+  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl-std/getOppositeEdge.md

@@ -30,10 +30,10 @@ getOppositeEdge(@edge: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])
-  |> angledLine(angle = 60deg, length = 10)
-  |> angledLine(angle = 120deg, length = 10)
+  |> angledLine(angle = 60, length = 10)
+  |> angledLine(angle = 120, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240deg, length = 10, tag = $referenceEdge)
+  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl-std/getPreviousAdjacentEdge.md

@@ -30,10 +30,10 @@ getPreviousAdjacentEdge(@edge: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])
-  |> angledLine(angle = 60deg, length = 10)
-  |> angledLine(angle = 120deg, length = 10)
+  |> angledLine(angle = 60, length = 10)
+  |> angledLine(angle = 120, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240deg, length = 10, tag = $referenceEdge)
+  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl-std/index.md

@@ -128,9 +128,6 @@ layout: manual
   * [`E`](/docs/kcl-std/consts/std-math-E)
   * [`PI`](/docs/kcl-std/consts/std-math-PI)
   * [`TAU`](/docs/kcl-std/consts/std-math-TAU)
-* [**std::sweep**](/docs/kcl-std/modules/std-sweep)
-  * [`sweep::SKETCH_PLANE`](/docs/kcl-std/consts/std-sweep-SKETCH_PLANE)
-  * [`sweep::TRAJECTORY`](/docs/kcl-std/consts/std-sweep-TRAJECTORY)
 * [**std::turns**](/docs/kcl-std/modules/std-turns)
   * [`turns::HALF_TURN`](/docs/kcl-std/consts/std-turns-HALF_TURN)
   * [`turns::QUARTER_TURN`](/docs/kcl-std/consts/std-turns-QUARTER_TURN)

docs/kcl-std/involuteCircular.md

@@ -43,11 +43,11 @@ a = 10
 b = 14
 startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> involuteCircular(startRadius = a, endRadius = b, angle = 60deg)
+  |> involuteCircular(startRadius = a, endRadius = b, angle = 60)
   |> involuteCircular(
        startRadius = a,
        endRadius = b,
-       angle = 60deg,
+       angle = 60,
        reverse = true,
      )
 ```

docs/kcl-std/modules/std-sweep.md

@@ -1,17 +0,0 @@
----
-title: "sweep"
-subtitle: "Module in std"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-
-## Functions and constants
-
-* [`sweep::SKETCH_PLANE`](/docs/kcl-std/consts/std-sweep-SKETCH_PLANE)
-* [`sweep::TRAJECTORY`](/docs/kcl-std/consts/std-sweep-TRAJECTORY)
-

docs/kcl-std/modules/std.md

@@ -19,7 +19,6 @@ You might also want the [KCL language reference](/docs/kcl-lang) or the [KCL gui
 * [`math`](/docs/kcl-std/modules/std-math)
 * [`sketch`](/docs/kcl-std/modules/std-sketch)
 * [`solid`](/docs/kcl-std/modules/std-solid)
-* [`sweep::sweep`](/docs/kcl-std/modules/std-sweep)
 * [`transform`](/docs/kcl-std/modules/std-transform)
 * [`turns::turns`](/docs/kcl-std/modules/std-turns)
 * [`types`](/docs/kcl-std/modules/std-types)

docs/kcl-std/patternCircular2d.md

@@ -48,7 +48,7 @@ exampleSketch = startSketchOn(XZ)
   |> patternCircular2d(
        center = [0, 0],
        instances = 13,
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        rotateDuplicates = true,
      )
 

docs/kcl-std/patternCircular3d.md

@@ -49,7 +49,7 @@ example = extrude(exampleSketch, length = -5)
        axis = [1, -1, 0],
        center = [10, -20, 0],
        instances = 11,
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        rotateDuplicates = true,
      )
 ```

docs/kcl-std/patternTransform.md

@@ -123,7 +123,7 @@ fn transform(@i) {
       pow(0.9, exp = i)
     ],
     // Turn by 15 degrees each time.
-    rotation = { angle = 15deg * i, origin = "local" }
+    rotation = { angle = 15 * i, origin = "local" }
   }
 }
 
@@ -158,7 +158,7 @@ fn transform(@i) {
   return {
     translate = [0, 0, -i * width],
     rotation = {
-      angle = 90deg * i,
+      angle = 90 * i,
       // Rotate around the overall scene's origin.
       origin = "global"
     }
@@ -204,7 +204,7 @@ fn transform(@i) {
   // Transform functions can return multiple transforms. They'll be applied in order.
   return [
     { translate = [30 * i, 0, 0] },
-    { rotation = { angle = 45deg * i } }
+    { rotation = { angle = 45 * i } }
   ]
 }
 startSketchOn(XY)

docs/kcl-std/profileStart.md

@@ -29,8 +29,8 @@ profileStart(@profile: Sketch): [number]
 ```kcl
 sketch001 = startSketchOn(XY)
   |> startProfile(at = [5, 2])
-  |> angledLine(angle = 120deg, length = 50, tag = $seg01)
-  |> angledLine(angle = segAng(seg01) + 120deg, length = 50)
+  |> angledLine(angle = 120, length = 50, tag = $seg01)
+  |> angledLine(angle = segAng(seg01) + 120, length = 50)
   |> line(end = profileStart(%))
   |> close()
   |> extrude(length = 20)

docs/kcl-std/scale.md

@@ -49,9 +49,9 @@ If you want to apply the transform in global space, set `global` to `true`. The
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90deg, radius = 5)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90deg, radius = 5)
+  |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -85,8 +85,8 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfile(sketch001, at = [-200, 23.86])
-  |> angledLine(angle = 0deg, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90deg, length = 50.61)
+  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -96,7 +96,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfile(sketch002, at = [0, 0])
   |> yLine(length = 231.81)
-  |> tangentialArc(radius = 80, angle = -90deg)
+  |> tangentialArc(radius = 80, angle = -90)
   |> xLine(length = 384.93)
 
 parts = sweep([rectangleSketch, circleSketch], path = sweepPath)

docs/kcl-std/segLen.md

@@ -29,9 +29,9 @@ segLen(@tag: TagIdentifier): number
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 60deg, length = 10, tag = $thing)
-  |> tangentialArc(angle = -120deg, radius = 5)
-  |> angledLine(angle = -60deg, length = segLen(thing))
+  |> angledLine(angle = 60, length = 10, tag = $thing)
+  |> tangentialArc(angle = -120, radius = 5)
+  |> angledLine(angle = -60, length = segLen(thing))
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl-std/startSketchOn.md

@@ -146,7 +146,7 @@ exampleSketch = startSketchOn(XY)
   |> line(end = [-2, 0])
   |> close()
 
-example = revolve(exampleSketch, axis = Y, angle = 180deg)
+example = revolve(exampleSketch, axis = Y, angle = 180)
 
 exampleSketch002 = startSketchOn(example, face = END)
   |> startProfile(at = [4.5, -5])
@@ -178,7 +178,7 @@ exampleSketch = startSketchOn(XY)
 example = revolve(
   exampleSketch,
   axis = Y,
-  angle = 180deg,
+  angle = 180,
   tagEnd = $end01,
 )
 

docs/kcl-std/tangentialArc.md

@@ -41,7 +41,7 @@ When using radius and angle, draw a curved line segment along part of an imagina
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 45deg, length = 10)
+  |> angledLine(angle = 45, length = 10)
   |> tangentialArc(end = [0, -10])
   |> line(end = [-10, 0])
   |> close()
@@ -54,7 +54,7 @@ example = extrude(exampleSketch, length = 10)
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 60deg, length = 10)
+  |> angledLine(angle = 60, length = 10)
   |> tangentialArc(endAbsolute = [15, 15])
   |> line(end = [10, -15])
   |> close()
@@ -67,9 +67,9 @@ example = extrude(exampleSketch, length = 10)
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 60deg, length = 10)
-  |> tangentialArc(radius = 10, angle = -120deg)
-  |> angledLine(angle = -60deg, length = 10)
+  |> angledLine(angle = 60, length = 10)
+  |> tangentialArc(radius = 10, angle = -120)
+  |> angledLine(angle = -60, length = 10)
   |> close()
 
 example = extrude(exampleSketch, length = 10)

docs/kcl-std/translate.md

@@ -45,9 +45,9 @@ Translate is really useful for sketches if you want to move a sketch and then ro
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90deg, radius = 5)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90deg, radius = 5)
+  |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -86,8 +86,8 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfile(sketch001, at = [-200, 23.86])
-  |> angledLine(angle = 0deg, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90deg, length = 50.61)
+  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -97,7 +97,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfile(sketch002, at = [0, 0])
   |> yLine(length = 231.81)
-  |> tangentialArc(radius = 80, angle = -90deg)
+  |> tangentialArc(radius = 80, angle = -90)
   |> xLine(length = 384.93)
 
 parts = sweep([rectangleSketch, circleSketch], path = sweepPath)
@@ -156,7 +156,7 @@ profile001 = square()
 
 profile002 = square()
   |> translate(z = 20)
-  |> rotate(axis = [0, 0, 1.0], angle = 45deg)
+  |> rotate(axis = [0, 0, 1.0], angle = 45)
 
 loft([profile001, profile002])
 ```

docs/kcl-std/types/std-types-tag.md

@@ -15,9 +15,9 @@ way:
 ```js
 startSketchOn(XZ)
   |> startProfile(at = origin)
-  |> angledLine(angle = 0deg, length = 191.26, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
   |> angledLine(
-       angle = segAng(rectangleSegmentA001) - 90deg,
+       angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
        tag = $rectangleSegmentB001,
      )
@@ -49,9 +49,9 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn(XZ)
     |> startProfile(at = origin)
-    |> angledLine(angle = 0deg, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
     |> angledLine(
-         angle = segAng(rectangleSegmentA001) - 90deg,
+         angle = segAng(rectangleSegmentA001) - 90,
          length = 196.99,
          tag = $rectangleSegmentB001)
     |> angledLine(
@@ -78,9 +78,9 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn(XZ)
     |> startProfile(at = origin)
-    |> angledLine(angle = 0deg, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
     |> angledLine(
-         angle = segAng(rectangleSegmentA001) - 90deg,
+         angle = segAng(rectangleSegmentA001) - 90,
          length = 196.99
          tag = $rectangleSegmentB001,
        )

docs/kcl-std/xLine.md

@@ -38,10 +38,10 @@ xLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> xLine(length = 15)
-  |> angledLine(angle = 80deg, length = 15)
+  |> angledLine(angle = 80, length = 15)
   |> line(end = [8, -10])
   |> xLine(length = 10)
-  |> angledLine(angle = 120deg, length = 30)
+  |> angledLine(angle = 120, length = 30)
   |> xLine(length = -15)
   |> close()
 

docs/kcl-std/yLine.md

@@ -38,7 +38,7 @@ yLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> yLine(length = 15)
-  |> angledLine(angle = 30deg, length = 15)
+  |> angledLine(angle = 30, length = 15)
   |> line(end = [8, -10])
   |> yLine(length = -5)
   |> close()

e2e/playwright/code-pane-and-errors.spec.ts

@@ -134,6 +134,8 @@ extrude001 = extrude(sketch001, length = 5)`
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
 
+    await page.waitForTimeout(1000)
+
     // Ensure badge is present
     const codePaneButtonHolder = page.locator('#code-button-holder')
     await expect(codePaneButtonHolder).toContainText('notification', {
@@ -156,14 +158,10 @@ extrude001 = extrude(sketch001, length = 5)`
     await expect(
       page
         .getByText(
-          'Solid3D revolve failed:  sketch profile must lie entirely on one side of the revolution axis'
+          'Modeling command failed: [ApiError { error_code: InternalEngine, message: "Solid3D revolve failed:  sketch profile must lie entirely on one side of the revolution axis" }]'
         )
         .first()
     ).toBeVisible()
-
-    // Make sure ApiError is not on the page.
-    // This ensures we didn't nest the json
-    await expect(page.getByText('ApiError')).not.toBeVisible()
   })
 
   test('When error is not in view WITH LINTS you can click the badge to scroll to it', async ({
@@ -181,7 +179,7 @@ extrude001 = extrude(sketch001, length = 5)`
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
 
-    // await scene.settled(cmdBar)
+    await scene.settled(cmdBar)
 
     // Ensure badge is present
     const codePaneButtonHolder = page.locator('#code-button-holder')

e2e/playwright/desktop-export.spec.ts

@@ -58,6 +58,12 @@ test(
       await expect(submitButton).toBeVisible()
       await page.keyboard.press('Enter')
 
+      // Look out for the toast message
+      const exportingToastMessage = page.getByText(`Exporting...`)
+      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
+      await expect(exportingToastMessage).toBeVisible()
+      await expect(alreadyExportingToastMessage).not.toBeVisible()
+
       // Expect it to succeed
       const errorToastMessage = page.getByText(`Error while exporting`)
       const engineErrorToastMessage = page.getByText(`Nothing to export`)
@@ -66,6 +72,7 @@ test(
 
       const successToastMessage = page.getByText(`Exported successfully`)
       await expect(successToastMessage).toBeVisible()
+      await expect(exportingToastMessage).not.toBeVisible()
 
       // Check for the exported file
       const firstFileFullPath = path.resolve(

e2e/playwright/editor-tests.spec.ts

@@ -912,7 +912,7 @@ a1 = startSketchOn(offsetPlane(XY, offset = 10))
     |> close()
     |> revolve(
     axis = revolveAxis,
-    angle = 90deg
+    angle = 90
     )
     `
       )
@@ -1533,6 +1533,7 @@ sketch001 = startSketchOn(XZ)
     await homePage.goToModelingScene()
 
     await scene.connectionEstablished()
+    await scene.settled(cmdBar)
 
     await scene.expectPixelColor(
       TEST_COLORS.DARK_MODE_BKGD,

e2e/playwright/feature-tree-pane.spec.ts

@@ -38,7 +38,7 @@ extrude001 = extrude(sketch002, length = 10)
 
 const FEATURE_TREE_SKETCH_CODE = `sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 0deg, length = 4, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 4, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])

e2e/playwright/import-ui.spec.ts

@@ -16,7 +16,7 @@ test.describe('Import UI tests', () => {
           path.join(projectDir, 'toBeImported.kcl'),
           `sketch001 = startSketchOn(XZ)
 profile001 = startProfile(sketch001, at = [281.54, 305.81])
-  |> angledLine(angle = 0deg, length = 123.43, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 123.43, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 85.99)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -33,7 +33,7 @@ importedCube
 
 sketch001 = startSketchOn(XZ)
 profile001 = startProfile(sketch001, at = [-134.53, -56.17])
-  |> angledLine(angle = 0deg, length = 79.05, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 79.05, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 76.28)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $seg01)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)

e2e/playwright/point-click.spec.ts

@@ -365,7 +365,7 @@ test.describe('Point-and-click tests', () => {
         clickCoords: { x: 677, y: 87 },
         cameraPos: { x: -6200, y: 1500, z: 6200 },
         cameraTarget: { x: 8300, y: 1100, z: 4800 },
-        beforeChamferSnippet: `angledLine(angle = 0deg, length = 268.43, tag = $rectangleSegmentA001)chamfer(
+        beforeChamferSnippet: `angledLine(angle = 0, length = 268.43, tag = $rectangleSegmentA001)chamfer(
          length = 30,
          tags = [
            getNextAdjacentEdge(yo),
@@ -407,7 +407,7 @@ test.describe('Point-and-click tests', () => {
 
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [75.8, 317.2]) // [$startCapTag, $EndCapTag]
-  |> angledLine(angle = 0deg, length = 268.43, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 268.43, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 217.26, tag = $seg01)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $yo)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
@@ -419,28 +419,28 @@ extrude001 = extrude(sketch001, length = 100)
   |> chamfer(length = 30, tags = [getNextAdjacentEdge(yo)], tag = $seg06)
 sketch002 = startSketchOn(extrude001, face = seg03)
 profile001 = startProfile(sketch002, at = [205.96, 254.59])
-  |> angledLine(angle = 0deg, length = 11.39, tag = $rectangleSegmentA002)
+  |> angledLine(angle = 0, length = 11.39, tag = $rectangleSegmentA002)
   |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 105.26)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 sketch003 = startSketchOn(extrude001, face = seg04)
 profile002 = startProfile(sketch003, at = [-209.64, 255.28])
-  |> angledLine(angle = 0deg, length = 11.56, tag = $rectangleSegmentA003)
+  |> angledLine(angle = 0, length = 11.56, tag = $rectangleSegmentA003)
   |> angledLine(angle = segAng(rectangleSegmentA003) - 90, length = 106.84)
   |> angledLine(angle = segAng(rectangleSegmentA003), length = -segLen(rectangleSegmentA003))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 sketch004 = startSketchOn(extrude001, face = seg05)
 profile003 = startProfile(sketch004, at = [82.57, 322.96])
-  |> angledLine(angle = 0deg, length = 11.16, tag = $rectangleSegmentA004)
+  |> angledLine(angle = 0, length = 11.16, tag = $rectangleSegmentA004)
   |> angledLine(angle = segAng(rectangleSegmentA004) - 90, length = 103.07)
   |> angledLine(angle = segAng(rectangleSegmentA004), length = -segLen(rectangleSegmentA004))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 sketch005 = startSketchOn(extrude001, face = seg06)
 profile004 = startProfile(sketch005, at = [-23.43, 19.69])
-  |> angledLine(angle = 0deg, length = 9.1, tag = $rectangleSegmentA005)
+  |> angledLine(angle = 0, length = 9.1, tag = $rectangleSegmentA005)
   |> angledLine(angle = segAng(rectangleSegmentA005) - 90, length = 84.07)
   |> angledLine(angle = segAng(rectangleSegmentA005), length = -segLen(rectangleSegmentA005))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -504,7 +504,7 @@ profile004 = startProfile(sketch005, at = [-23.43, 19.69])
         `@settings(defaultLengthUnit = in)
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [75.8, 317.2])
-  |> angledLine(angle = 0deg, length = 268.43, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 268.43, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 217.26, tag = $seg01)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $yo)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
@@ -526,7 +526,7 @@ chamf = chamfer(
      )
 sketch002 = startSketchOn(extrude001, face = seg03)
 profile001 = startProfile(sketch002, at = [205.96, 254.59])
-  |> angledLine(angle = 0deg, length = 11.39, tag = $rectangleSegmentA002)
+  |> angledLine(angle = 0, length = 11.39, tag = $rectangleSegmentA002)
   |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 105.26)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -1776,7 +1776,7 @@ sketch002 = startSketchOn(XZ)
       initialCode: `@settings(defaultLengthUnit = in)
 sketch001 = startSketchOn(YZ)
 profile001 = startProfile(sketch001, at = [-400, -400])
-  |> angledLine(angle = 0deg, length = 800, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 800, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = 800)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -1931,37 +1931,50 @@ sketch002 = startSketchOn(XZ)
     })
   })
 
-  test(`Sweep point-and-click helix`, async ({
+  test(`Sweep point-and-click failing validation`, async ({
     context,
     page,
     homePage,
     scene,
-    editor,
     toolbar,
     cmdBar,
   }) => {
-    const circleCode = `circle(sketch001, center = [0, -1], radius = .1)`
-    const initialCode = `helix001 = helix(
-  axis = X,
-  radius = 1,
-  length = 10,
-  revolutions = 10,
-  angleStart = 0,
-  ccw = false,
-)
-sketch001 = startSketchOn(XZ)
-profile001 = ${circleCode}`
-    const sweepDeclaration = 'sweep001 = sweep(profile001, path = helix001)'
-
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(YZ)
+  |> circle(
+       center = [0, 0],
+       radius = 500
+     )
+sketch002 = startSketchOn(XZ)
+  |> startProfile(at = [0, 0])
+  |> xLine(length = -500)
+  |> line(endAbsolute = [-2000, 500])
+`
     await context.addInitScript((initialCode) => {
       localStorage.setItem('persistCode', initialCode)
     }, initialCode)
+    await page.setBodyDimensions({ width: 1000, height: 500 })
     await homePage.goToModelingScene()
     await scene.settled(cmdBar)
 
-    await test.step(`Add sweep through the command bar flow`, async () => {
-      await toolbar.openPane('feature-tree')
+    // One dumb hardcoded screen pixel value
+    const testPoint = { x: 700, y: 250 }
+    const [clickOnSketch1] = scene.makeMouseHelpers(testPoint.x, testPoint.y)
+    const [clickOnSketch2] = scene.makeMouseHelpers(
+      testPoint.x - 50,
+      testPoint.y
+    )
+
+    await test.step(`Look for sketch001`, async () => {
+      await toolbar.closePane('code')
+      await scene.expectPixelColor([53, 53, 53], testPoint, 15)
+    })
+
+    await test.step(`Go through the command bar flow and fail validation with a toast`, async () => {
       await toolbar.sweepButton.click()
+      await expect
+        .poll(() => page.getByText('Please select one').count())
+        .toBe(1)
       await cmdBar.expectState({
         commandName: 'Sweep',
         currentArgKey: 'sketches',
@@ -1974,8 +1987,7 @@ profile001 = ${circleCode}`
         highlightedHeaderArg: 'sketches',
         stage: 'arguments',
       })
-      await editor.scrollToText(circleCode)
-      await page.getByText(circleCode).click()
+      await clickOnSketch1()
       await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         commandName: 'Sweep',
@@ -1989,39 +2001,11 @@ profile001 = ${circleCode}`
         highlightedHeaderArg: 'path',
         stage: 'arguments',
       })
-      const helix = await toolbar.getFeatureTreeOperation('Helix', 0)
-      await helix.click()
-      await cmdBar.expectState({
-        commandName: 'Sweep',
-        currentArgKey: 'path',
-        currentArgValue: '',
-        headerArguments: {
-          Sectional: '',
-          Sketches: '1 face',
-          Path: '',
-        },
-        highlightedHeaderArg: 'path',
-        stage: 'arguments',
-      })
+      await clickOnSketch2()
       await cmdBar.progressCmdBar()
-      await cmdBar.expectState({
-        commandName: 'Sweep',
-        headerArguments: {
-          Sketches: '1 face',
-          Path: '1 helix',
-          Sectional: '',
-        },
-        stage: 'review',
-      })
-      await cmdBar.progressCmdBar()
-      await editor.expectEditor.toContain(sweepDeclaration)
-    })
-
-    await test.step('Delete sweep via feature tree selection', async () => {
-      const sweep = await toolbar.getFeatureTreeOperation('Sweep', 0)
-      await sweep.click()
-      await page.keyboard.press('Delete')
-      await editor.expectEditor.not.toContain(sweepDeclaration)
+      await expect(
+        page.getByText('Unable to sweep with the current selection. Reason:')
+      ).toBeVisible()
     })
   })
 
@@ -3643,6 +3627,67 @@ profile001 = startProfile(sketch001, at = [-20, 20])
     })
   })
 
+  test(`Shell dry-run validation rejects sweeps`, async ({
+    context,
+    page,
+    homePage,
+    scene,
+    editor,
+    toolbar,
+    cmdBar,
+  }) => {
+    const initialCode = `sketch001 = startSketchOn(YZ)
+  |> circle(
+       center = [0, 0],
+       radius = 500
+     )
+sketch002 = startSketchOn(XZ)
+    |> startProfile(at = [0, 0])
+  |> xLine(length = -2000)
+sweep001 = sweep(sketch001, path = sketch002)
+`
+    await context.addInitScript((initialCode) => {
+      localStorage.setItem('persistCode', initialCode)
+    }, initialCode)
+    await page.setBodyDimensions({ width: 1000, height: 500 })
+    await homePage.goToModelingScene()
+    await scene.settled(cmdBar)
+
+    // One dumb hardcoded screen pixel value
+    const testPoint = { x: 500, y: 250 }
+    const [clickOnSweep] = scene.makeMouseHelpers(testPoint.x, testPoint.y)
+
+    await test.step(`Confirm sweep exists`, async () => {
+      await toolbar.closePane('code')
+      await scene.expectPixelColor([231, 231, 231], testPoint, 15)
+    })
+
+    await test.step(`Go through the Shell flow and fail validation with a toast`, async () => {
+      await toolbar.shellButton.click()
+      await expect
+        .poll(() => page.getByText('Please select one').count())
+        .toBe(1)
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'selection',
+        currentArgValue: '',
+        headerArguments: {
+          Selection: '',
+          Thickness: '',
+        },
+        highlightedHeaderArg: 'selection',
+        commandName: 'Shell',
+      })
+      await clickOnSweep()
+      await page.waitForTimeout(500)
+      await cmdBar.progressCmdBar()
+      await expect(
+        page.getByText('Unable to shell with the current selection. Reason:')
+      ).toBeVisible()
+      await page.waitForTimeout(1000)
+    })
+  })
+
   test.describe('Revolve point and click workflows', () => {
     test('Base case workflow, auto spam continue in command bar', async ({
       context,
@@ -3656,7 +3701,7 @@ profile001 = startProfile(sketch001, at = [-20, 20])
       const initialCode = `
 sketch001 = startSketchOn(XZ)
 |> startProfile(at = [-100.0, 100.0])
-|> angledLine(angle = 0deg, length = 200.0, tag = $rectangleSegmentA001)
+|> angledLine(angle = 0, length = 200.0, tag = $rectangleSegmentA001)
 |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 200, tag = $rectangleSegmentB001)
 |> angledLine(
 angle=segAng(rectangleSegmentA001),
@@ -3668,7 +3713,7 @@ tag=$rectangleSegmentC001,
 extrude001 = extrude(sketch001, length = 200)
 sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
 |> startProfile(at = [-66.77, 84.81])
-|> angledLine(angle = 180deg, length = 27.08, tag = $rectangleSegmentA002)
+|> angledLine(angle = 180, length = 27.08, tag = $rectangleSegmentA002)
 |> angledLine(
 angle=segAng(rectangleSegmentA002) - 90,
 length=27.8,
@@ -3702,7 +3747,7 @@ tag=$rectangleSegmentC002,
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
 
-      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360deg, axis = X)`
+      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = X)`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
 
       // Edit flow
@@ -3735,7 +3780,7 @@ tag=$rectangleSegmentC002,
       await cmdBar.progressCmdBar()
       await toolbar.closePane('feature-tree')
       await editor.expectEditor.toContain(
-        newCodeToFind.replace('angle = 360deg', 'angle = ' + newAngle)
+        newCodeToFind.replace('angle = 360', 'angle = ' + newAngle)
       )
     })
     test('revolve surface around edge from an extruded solid2d', async ({
@@ -3749,7 +3794,7 @@ tag=$rectangleSegmentC002,
     }) => {
       const initialCode = `sketch001 = startSketchOn(XZ)
   |> startProfile(at = [-102.57, 101.72])
-  |> angledLine(angle = 0deg, length = 202.6, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 202.6, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 202.6, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -3775,13 +3820,13 @@ sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
       await toolbar.revolveButton.click()
       await cmdBar.progressCmdBar()
       await page.getByText('Edge', { exact: true }).click()
-      const lineCodeToSelection = `angledLine(angle = 0deg, length = 202.6, tag = $rectangleSegmentA001)`
+      const lineCodeToSelection = `angledLine(angle = 0, length = 202.6, tag = $rectangleSegmentA001)`
       await page.getByText(lineCodeToSelection).click()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
 
-      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360deg, axis = rectangleSegmentA001)`
+      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = rectangleSegmentA001)`
       await editor.expectEditor.toContain(newCodeToFind)
 
       // Edit flow
@@ -3819,7 +3864,7 @@ sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
       await toolbar.closePane('feature-tree')
       await editor.expectEditor.toContain('angle001 = ' + newAngle)
       await editor.expectEditor.toContain(
-        newCodeToFind.replace('angle = 360deg', 'angle = angle001')
+        newCodeToFind.replace('angle = 360', 'angle = angle001')
       )
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
     })
@@ -3838,7 +3883,7 @@ sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
       |> xLine(length = 2.6)
     sketch001 = startSketchOn(-XY)
       |> startProfile(at = [-0.48, 1.25])
-      |> angledLine(angle = 0deg, length = 2.38, tag = $rectangleSegmentA001)
+      |> angledLine(angle = 0, length = 2.38, tag = $rectangleSegmentA001)
       |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2.4, tag = $rectangleSegmentB001)
       |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
       |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -3876,7 +3921,7 @@ sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
 
-      const newCodeToFind = `revolve001 = revolve(sketch003, angle = 360deg, axis = seg01)`
+      const newCodeToFind = `revolve001 = revolve(sketch003, angle = 360, axis = seg01)`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
 
       // Edit flow
@@ -3909,7 +3954,7 @@ sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
       await cmdBar.progressCmdBar()
       await toolbar.closePane('feature-tree')
       await editor.expectEditor.toContain(
-        newCodeToFind.replace('angle = 360deg', 'angle = ' + newAngle)
+        newCodeToFind.replace('angle = 360', 'angle = ' + newAngle)
       )
     })
   })
@@ -4893,39 +4938,9 @@ path001 = startProfile(sketch001, at = [0, 0])
       await page.getByTestId('context-menu-delete').click()
       await scene.settled(cmdBar)
       await editor.expectEditor.not.toContain(
-        `revolve001 = revolve([profile001, profile002], axis = XY, angle = 180deg)`,
+        `revolve001 = revolve([profile001, profile002], axis = XY, angle = 180)`,
         { shouldNormalise: true }
       )
     })
   })
-
-  test(`Point and click codemods can't run on KCL errors`, async ({
-    context,
-    page,
-    homePage,
-    scene,
-    editor,
-    toolbar,
-    cmdBar,
-  }) => {
-    const badCode = `sketch001 = startSketchOn(XZ)
-profile001 = circle(sketch001, center = [0, 0], radius = 1)
-extrude001 = extrude(profile001 length = 1)`
-    await context.addInitScript((initialCode) => {
-      localStorage.setItem('persistCode', initialCode)
-    }, badCode)
-    await page.setBodyDimensions({ width: 1000, height: 500 })
-    await homePage.goToModelingScene()
-    await scene.connectionEstablished()
-
-    await test.step(`Start Sketch is disabled`, async () => {
-      await expect(toolbar.startSketchBtn).not.toBeEnabled()
-      await editor.expectEditor.toContain(badCode, { shouldNormalise: true })
-    })
-
-    await test.step(`Helix is disabled`, async () => {
-      await expect(toolbar.helixButton).not.toBeEnabled()
-      await editor.expectEditor.toContain(badCode, { shouldNormalise: true })
-    })
-  })
 })

e2e/playwright/prompt-to-edit-snapshot-tests.spec.ts

@@ -47,7 +47,7 @@ b
 
 const importedFile = `sketch003 = startSketchOn(XY)
   |> startProfile(at = [52.92, 157.81])
-  |> angledLine(angle = 0deg, length = 176.4, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 176.4, tag = $rectangleSegmentA001)
   |> angledLine(
        angle = segAng(rectangleSegmentA001) - 90,
        length = 53.4,

e2e/playwright/prompt-to-edit.spec.ts

@@ -23,7 +23,7 @@ sketch002 = startSketchOn(XZ)
 extrude002 = extrude(sketch002, length = 50)
 sketch003 = startSketchOn(XY)
   |> startProfile(at = [52.92, 157.81])
-  |> angledLine(angle = 0deg, length = 176.4, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 176.4, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 53.4, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])

e2e/playwright/regression-tests.spec.ts

@@ -19,12 +19,11 @@ test.describe('Regression tests', () => {
     context,
     page,
     homePage,
-    scene,
   }) => {
     // because the model has `line([0,0]..` it is valid code, but the model is invalid
     // regression test for https://github.com/KittyCAD/modeling-app/issues/3251
     // Since the bad model also found as issue with the artifact graph, which in tern blocked the editor diognostics
-    // const u = await getUtils(page)
+    const u = await getUtils(page)
     await context.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
@@ -41,8 +40,7 @@ test.describe('Regression tests', () => {
     await page.setBodyDimensions({ width: 1000, height: 500 })
 
     await homePage.goToModelingScene()
-    await scene.connectionEstablished()
-    // await u.waitForPageLoad()
+    await u.waitForPageLoad()
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-error')).toBeVisible()
@@ -53,11 +51,8 @@ test.describe('Regression tests', () => {
     // the close doesn't work
     // when https://github.com/KittyCAD/modeling-app/issues/3268 is closed
     // this test will need updating
-    const crypticErrorText = `Cannot close a path that is non-planar or with duplicate vertices.
-Internal engine error on request`
+    const crypticErrorText = `ApiError`
     await expect(page.getByText(crypticErrorText).first()).toBeVisible()
-    // Ensure we didn't nest the json.
-    await expect(page.getByText('ApiError')).not.toBeVisible()
   })
   test('user should not have to press down twice in cmdbar', async ({
     page,
@@ -72,7 +67,7 @@ Internal engine error on request`
         'persistCode',
         `sketch001 = startSketchOn(XY)
   |> startProfile(at = [82.33, 238.21])
-  |> angledLine(angle = 0deg, length = 288.63, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 288.63, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 197.97, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -190,8 +185,8 @@ extrude001 = extrude(sketch001, length = 50)
       page.locator('.pretty-json-container >> text=myVar:"67')
     ).toBeVisible()
   })
-  test('ProgramMemory can be serialised', async ({ page, homePage, scene }) => {
-    // const u = await getUtils(page)
+  test('ProgramMemory can be serialised', async ({ page, homePage }) => {
+    const u = await getUtils(page)
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
@@ -216,12 +211,11 @@ extrude001 = extrude(sketch001, length = 50)
     // Listen for all console events and push the message text to an array
     page.on('console', (message) => messages.push(message.text()))
     await homePage.goToModelingScene()
-    // await u.waitForPageLoad()
-    await scene.connectionEstablished()
+    await u.waitForPageLoad()
 
     // wait for execution done
-    // await u.openDebugPanel()
-    // await u.expectCmdLog('[data-message-type="execution-done"]')
+    await u.openDebugPanel()
+    await u.expectCmdLog('[data-message-type="execution-done"]')
 
     const forbiddenMessages = ['cannot serialize tagged newtype variant']
     forbiddenMessages.forEach((forbiddenMessage) => {
@@ -235,7 +229,6 @@ extrude001 = extrude(sketch001, length = 50)
     context,
     page,
     homePage,
-    scene,
   }) => {
     const u = await getUtils(page)
     // const PUR = 400 / 37.5 //pixeltoUnitRatio
@@ -245,7 +238,7 @@ extrude001 = extrude(sketch001, length = 50)
         'persistCode',
         `exampleSketch = startSketchOn(XZ)
       |> startProfile(at = [0, 0])
-      |> angledLine(angle = 50deg, length = 45 )
+      |> angledLine(angle = 50, length = 45 )
       |> yLine(endAbsolute = 0)
       |> close()
       |>
@@ -254,10 +247,11 @@ extrude001 = extrude(sketch001, length = 50)
     shell(exampleSketch, faces = ['end'], thickness = 0.25)`
       )
     })
-    await homePage.goToModelingScene()
-    await scene.connectionEstablished()
 
     await expect(async () => {
+      await homePage.goToModelingScene()
+      await u.waitForPageLoad()
+
       // error in guter
       await expect(page.locator('.cm-lint-marker-error')).toBeVisible({
         timeout: 1_000,
@@ -301,7 +295,7 @@ extrude001 = extrude(sketch001, length = 50)
       page.locator('.cm-content')
     ).toContainText(`exampleSketch = startSketchOn(XZ)
       |> startProfile(at = [0, 0])
-      |> angledLine(angle = 50deg, length = 45 )
+      |> angledLine(angle = 50, length = 45 )
       |> yLine(endAbsolute = 0)
       |> close()
 
@@ -321,7 +315,7 @@ extrude001 = extrude(sketch001, length = 50)
             `@settings(defaultLengthUnit = mm)
 sketch002 = startSketchOn(XY)
 profile002 = startProfile(sketch002, at = [72.24, -52.05])
-  |> angledLine(angle = 0deg, length = 181.26, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 181.26, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 21.54)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -551,8 +545,7 @@ extrude002 = extrude(profile002, length = 150)
         expect(alreadyExportingToastMessage).not.toBeVisible(),
       ])
 
-      const count = await successToastMessage.count()
-      await expect(count).toBeGreaterThanOrEqual(2)
+      await expect(successToastMessage).toHaveCount(2)
     })
   })
 

e2e/playwright/sketch-tests.spec.ts

@@ -1222,7 +1222,7 @@ profile001 = startProfile(sketch001, at = [299.72, 230.82])
       fn lug(origin, length, diameter, plane) {
         lugSketch = startSketchOn(plane)
           |> startProfile(at = [origin[0] + lugDiameter / 2, origin[1]])
-          |> angledLine(angle = 60deg, lengthY = lugHeadLength)
+          |> angledLine(angle = 60, lengthY = lugHeadLength)
           |> xLine(endAbsolute = 0 + .001)
           |> yLine(endAbsolute = 0)
           |> close()
@@ -1287,7 +1287,7 @@ extrude001 = extrude(profile001, length = 200)
   |> translate(x = 3.14, y = 3.14, z = -50.154)
 sketch002 = startSketchOn(XY)
 profile002 = startProfile(sketch002, at = [72.2, -52.05])
-  |> angledLine(angle = 0deg, length = 181.26, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 181.26, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 21.54)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $mySeg)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg01)
@@ -1365,18 +1365,18 @@ solid001 = subtract([extrude001], tools = [extrude002])
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
-        `fn in2mm(@inches) {
+        `fn in2mm = (inches) => {
     return inches * 25.4
   }
 
-  railTop = in2mm(.748)
-  railSide = in2mm(.024)
-  railBaseWidth = in2mm(.612)
-  railWideWidth = in2mm(.835)
-  railBaseLength = in2mm(.200)
-  railClampable = in2mm(.200)
+  const railTop = in2mm(.748)
+  const railSide = in2mm(.024)
+  const railBaseWidth = in2mm(.612)
+  const railWideWidth = in2mm(.835)
+  const railBaseLength = in2mm(.200)
+  const railClampable = in2mm(.200)
 
-  rail = startSketchOn(XZ)
+  const rail = startSketchOn(XZ)
     |> startProfile(at = [-railTop / 2, railClampable + railBaseLength])
     |> line(endAbsolute = [
      railTop / 2,
@@ -2058,7 +2058,7 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       )
       await crnRect1point2()
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0deg, length = 2.37, tag = $rectangleSegmentA001)
+        `|> angledLine(angle = 0, length = 2.37, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 7.8)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2073,7 +2073,7 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       await crnRect2point2()
       await page.waitForTimeout(300)
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0deg, length = 5.49, tag = $rectangleSegmentA002)
+        `|> angledLine(angle = 0, length = 5.49, tag = $rectangleSegmentA002)
   |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 4.14)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2092,7 +2092,7 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       await cntrRect1point2()
       await page.waitForTimeout(300)
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0deg, length = 7.06, tag = $rectangleSegmentA003)
+        `|> angledLine(angle = 0, length = 7.06, tag = $rectangleSegmentA003)
   |> angledLine(angle = segAng(rectangleSegmentA003) + 90, length = 4.34)
   |> angledLine(angle = segAng(rectangleSegmentA003), length = -segLen(rectangleSegmentA003))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2108,7 +2108,7 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       await cntrRect2point2()
       await page.waitForTimeout(300)
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0deg, length = 3.12, tag = $rectangleSegmentA004)
+        `|> angledLine(angle = 0, length = 3.12, tag = $rectangleSegmentA004)
   |> angledLine(angle = segAng(rectangleSegmentA004) + 90, length = 6.24)
   |> angledLine(angle = segAng(rectangleSegmentA004), length = -segLen(rectangleSegmentA004))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2258,7 +2258,7 @@ profile001 = startProfile(sketch001, at = [6.24, 4.54])
   |> line(end = [8.61, 0.74])
   |> line(end = [10.99, -5.22])
 profile002 = startProfile(sketch001, at = [11.19, 5.02])
-  |> angledLine(angle = 0deg, length = 10.78, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 10.78, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 4.14)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2370,7 +2370,7 @@ profile004 = circleThreePoint(sketch001, p1 = [13.44, -6.8], p2 = [13.39, -2.07]
       await page.waitForTimeout(100)
       await rectEnd()
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 180deg, length = 1.97, tag = $rectangleSegmentA002)
+        `|> angledLine(angle = 180, length = 1.97, tag = $rectangleSegmentA002)
   |> angledLine(angle = segAng(rectangleSegmentA002) + 90, length = 3.89)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2396,7 +2396,7 @@ profile001 = startProfile(sketch001, at = [6.24, 4.54])
   |> line(end = [8.61, 0.74])
   |> line(end = [10.99, -5.22])
 profile002 = startProfile(sketch001, at = [11.19, 5.02])
-  |> angledLine(angle = 0deg, length = 10.78, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 10.78, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 4.14)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2501,7 +2501,7 @@ profile001 = startProfile(sketch001, at = [-63.43, 193.08])
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 profile003 = startProfile(sketch001, at = [16.79, 38.24])
-  |> angledLine(angle = 0deg, length = 182.82, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 182.82, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 105.71)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2726,7 +2726,7 @@ profile002 = startProfile(sketch002, at = [0.75, 13.46])
   |> line(end = [4.52, 3.79])
   |> line(end = [5.98, -2.81])
 profile003 = startProfile(sketch002, at = [3.19, 13.3])
-  |> angledLine(angle = 0deg, length = 6.64, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 6.64, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2.81)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2744,7 +2744,7 @@ profile006 = startProfile(sketch002, at = [9.65, 3.82])
   |> close()
 revolve001 = revolve(
   profile004,
-  angle = 45deg,
+  angle = 45,
   axis = getNextAdjacentEdge(seg01)
 )
 extrude002 = extrude(profile006, length = 4)
@@ -2768,14 +2768,14 @@ profile010 = circle(
   radius = 2.67
 )
 profile011 = startProfile(sketch003, at = [5.07, -6.39])
-  |> angledLine(angle = 0deg, length = 4.54, tag = $rectangleSegmentA002)
+  |> angledLine(angle = 0, length = 4.54, tag = $rectangleSegmentA002)
   |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 4.17)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 extrude003 = extrude(profile011, length = 2.5)
 // TODO this breaks the test,
-// revolve002 = revolve(profile008, angle = 45deg, axis = seg02)
+// revolve002 = revolve(profile008, angle = 45, axis = seg02)
 `
       )
     })
@@ -2921,7 +2921,7 @@ loft([profile001, profile002])
     )
     await rect1Crn2()
     await editor.expectEditor.toContain(
-      `angledLine(angle = 0deg, length = 113.01, tag = $rectangleSegmentA001)`
+      `angledLine(angle = 0, length = 113.01, tag = $rectangleSegmentA001)`
     )
   })
   test('Can enter sketch loft edges offsetPlane and continue sketch', async ({
@@ -2990,7 +2990,7 @@ loft([profile001, profile002])
     )
     await rect1Crn2()
     await editor.expectEditor.toContain(
-      `angledLine(angle = 0deg, length = 106.42], tag = $rectangleSegmentA001)`
+      `angledLine(angle = 0, length = 106.42], tag = $rectangleSegmentA001)`
     )
     await page.waitForTimeout(100)
   })
@@ -3212,7 +3212,7 @@ test.describe('manual edits during sketch mode', () => {
     extrude001 = extrude(profile001, length = 500)
     sketch002 = startSketchOn(extrude001, face = seg01)
     profile002 = startProfile(sketch002, at = [83.39, 329.15])
-      |> angledLine(angle = 0deg, length = 119.61, tag = $rectangleSegmentA001)
+      |> angledLine(angle = 0, length = 119.61, tag = $rectangleSegmentA001)
       |> angledLine(length = 156.54, angle = -28)
       |> angledLine(
           angle = -151,
@@ -3348,7 +3348,7 @@ profile001 = startProfile(sketch001, at = [106.68, 89.77])
 extrude001 = extrude(profile001, length = 500)
 sketch002 = startSketchOn(extrude001, face = seg01)
 profile002 = startProfile(sketch002, at = [83.39, 329.15])
-  |> angledLine(angle = 0deg, length = 119.61, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 119.61, tag = $rectangleSegmentA001)
   |> angledLine(length = 219.2, angle = -56)
   |> angledLine(angle = -151, length = 116.27)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -3387,7 +3387,7 @@ profile003 = startProfile(sketch002, at = [-201.08, 254.17])
     extrude001 = extrude(profile001, length = 500)
     sketch002 = startSketchOn(extrude001, face = seg01)
     profile002 = startProfile(sketch002, at = [83.39, 329.15])
-      |> angledLine(angle = 0deg, length = 119.61, tag = $rectangleSegmentA001)
+      |> angledLine(angle = 0, length = 119.61, tag = $rectangleSegmentA001)
       |> angledLine(length = 156.54, angle = -28)
       |> angledLine(
            angle = -151,
@@ -3540,6 +3540,7 @@ profile001 = startProfile(sketch001, at = [127.56, 179.02])
 
     await homePage.openProject('multi-file-sketch-test')
     await scene.connectionEstablished()
+    await scene.settled(cmdBar)
 
     await u.closeDebugPanel()
 
@@ -3554,6 +3555,9 @@ profile001 = startProfile(sketch001, at = [127.56, 179.02])
 
     await toolbar.openFile('error.kcl')
 
+    // Ensure filetree is populated
+    await scene.settled(cmdBar)
+
     await expect(
       toolbar.featureTreePane.getByRole('button', { name: 'Sketch' })
     ).toHaveCount(0)

e2e/playwright/snapshot-tests.spec.ts

@@ -1,3 +1,4 @@
+import { KCL_DEFAULT_LENGTH } from '@src/lib/constants'
 import type { CmdBarFixture } from '@e2e/playwright/fixtures/cmdBarFixture'
 import type { SceneFixture } from '@e2e/playwright/fixtures/sceneFixture'
 import { TEST_SETTINGS, TEST_SETTINGS_KEY } from '@e2e/playwright/storageStates'
@@ -8,7 +9,6 @@ import {
   settingsToToml,
 } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
-import { KCL_DEFAULT_LENGTH } from '@src/lib/constants'
 
 test.beforeEach(async ({ page, context }) => {
   // Make the user avatar image always 404
@@ -766,7 +766,7 @@ test.describe('Grid visibility', { tag: '@snapshot' }, () => {
   })
 })
 
-test('theme persists', async ({ page, context, homePage }) => {
+test('theme persists', async ({ page, context }) => {
   const u = await getUtils(page)
   await context.addInitScript(async () => {
     localStorage.setItem(
@@ -784,7 +784,7 @@ test('theme persists', async ({ page, context, homePage }) => {
 
   await page.setViewportSize({ width: 1200, height: 500 })
 
-  await homePage.goToModelingScene()
+  await u.waitForAuthSkipAppStart()
   await page.waitForTimeout(500)
 
   // await page.getByRole('link', { name: 'Settings Settings (tooltip)' }).click()
@@ -812,7 +812,7 @@ test('theme persists', async ({ page, context, homePage }) => {
   // Disconnect and reconnect to check the theme persists through a reload
 
   // Expect the network to be down
-  await expect(networkToggle).toContainText('Problem')
+  await expect(networkToggle).toContainText('Offline')
 
   // simulate network up
   await u.emulateNetworkConditions({
@@ -845,7 +845,7 @@ test.describe('code color goober', { tag: '@snapshot' }, () => {
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90deg, radius = 5)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
   |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
@@ -873,50 +873,6 @@ sweepSketch = startSketchOn(XY)
       mask: lowerRightMasks(page),
     })
   })
-  test('code color goober works with single quotes', async ({
-    page,
-    context,
-    scene,
-    cmdBar,
-  }) => {
-    const u = await getUtils(page)
-    await context.addInitScript(async () => {
-      localStorage.setItem(
-        'persistCode',
-        `// Create a pipe using a sweep.
-
-// Create a path for the sweep.
-sweepPath = startSketchOn(XZ)
-  |> startProfile(at = [0.05, 0.05])
-  |> line(end = [0, 7])
-  |> tangentialArc(angle = 90deg, radius = 5)
-  |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
-  |> line(end = [0, 7])
-
-sweepSketch = startSketchOn(XY)
-  |> startProfile(at = [2, 0])
-  |> arc(angleStart = 0, angleEnd = 360, radius = 2)
-  |> sweep(path = sweepPath)
-  |> appearance(
-       color = '#bb00ff',
-       metalness = 90,
-       roughness = 90
-     )
-`
-      )
-    })
-
-    await page.setViewportSize({ width: 1200, height: 1000 })
-    await u.waitForAuthSkipAppStart()
-
-    await scene.settled(cmdBar)
-
-    await expect(page, 'expect small color widget').toHaveScreenshot({
-      maxDiffPixels: 100,
-      mask: lowerRightMasks(page),
-    })
-  })
 
   test('code color goober opening window', async ({
     page,
@@ -934,7 +890,7 @@ sweepSketch = startSketchOn(XY)
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90deg, radius = 5)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
   |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])

e2e/playwright/storageStates.ts

@@ -62,16 +62,16 @@ export const TEST_CODE_GIZMO = `@settings(defaultLengthUnit = in)
 part001 = startSketchOn(XZ)
 |> startProfile(at = [20, 0])
 |> line(end = [7.13, 4 + 0])
-|> angledLine(angle = 3deg + 0, length = 3.14 + 0 )
+|> angledLine(angle = 3 + 0, length = 3.14 + 0 )
 |> line(endAbsolute = [20.14 + 0, -0.14 + 0])
 |> xLine(endAbsolute = 29 + 0)
 |> yLine(length = -3.14 + 0, tag = $a)
 |> xLine(length = 1.63)
-|> angledLine(angle = 3deg + 0, lengthX = 3.14 )
-|> angledLine(angle = 30deg, lengthY = 3 + 0 )
-|> angledLine(angle = 22.14deg + 0, endAbsoluteX = 12)
-|> angledLine(angle = 30deg, endAbsoluteY = 11.14)
-|> angledLineThatIntersects(angle = 3.14deg, intersectTag = a, offset = 0)
+|> angledLine(angle = 3 + 0, lengthX = 3.14 )
+|> angledLine(angle = 30, lengthY = 3 + 0 )
+|> angledLine(angle = 22.14 + 0, endAbsoluteX = 12)
+|> angledLine(angle = 30, endAbsoluteY = 11.14)
+|> angledLineThatIntersects(angle = 3.14, intersectTag = a, offset = 0)
 |> tangentialArc(endAbsolute = [13.14 + 0, 13.14])
 |> close()
 |> extrude(length = 5 + 7)
@@ -122,7 +122,7 @@ sketch001 = startSketchOn(box, face = revolveAxis)
   |> close()
   |> revolve(
   axis = revolveAxis,
-  angle = 90deg
+  angle = 90
   )
 
 sketch001 = startSketchOn(XZ)

e2e/playwright/test-network-and-connection-issues.spec.ts

@@ -1,257 +1,236 @@
 import type { EngineCommand } from '@src/lang/std/artifactGraph'
 import { uuidv4 } from '@src/lib/utils'
 
-import {
-  commonPoints,
-  getUtils,
-  TEST_COLORS,
-  circleMove,
-} from '@e2e/playwright/test-utils'
+import { commonPoints, getUtils } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
 
-test.describe('Test network related behaviors', () => {
-  test(
-    'simulate network down and network little widget',
-    { tag: '@skipLocalEngine' },
-    async ({ page, homePage }) => {
-      const networkToggleConnectedText = page.getByText('Connected')
-      const networkToggleWeakText = page.getByText('Network health (Weak)')
+test.describe(
+  'Test network and connection issues',
+  {
+    tag: ['@macos', '@windows'],
+  },
+  () => {
+    test(
+      'simulate network down and network little widget',
+      { tag: '@skipLocalEngine' },
+      async ({ page, homePage }) => {
+        const u = await getUtils(page)
+        await page.setBodyDimensions({ width: 1200, height: 500 })
 
-      const u = await getUtils(page)
-      await page.setBodyDimensions({ width: 1200, height: 500 })
+        await homePage.goToModelingScene()
 
-      await homePage.goToModelingScene()
+        const networkToggle = page.getByTestId('network-toggle')
 
-      const networkToggle = page.getByTestId('network-toggle')
+        // This is how we wait until the stream is online
+        await expect(
+          page.getByRole('button', { name: 'Start Sketch' })
+        ).not.toBeDisabled({ timeout: 15000 })
 
-      // This is how we wait until the stream is online
-      await expect(
-        page.getByRole('button', { name: 'Start Sketch' })
-      ).not.toBeDisabled({ timeout: 15000 })
+        const networkWidget = page.locator('[data-testid="network-toggle"]')
+        await expect(networkWidget).toBeVisible()
+        await networkWidget.hover()
 
-      const networkWidget = page.locator('[data-testid="network-toggle"]')
-      await expect(networkWidget).toBeVisible()
-      await networkWidget.hover()
+        const networkPopover = page.locator('[data-testid="network-popover"]')
+        await expect(networkPopover).not.toBeVisible()
 
-      const networkPopover = page.locator('[data-testid="network-popover"]')
-      await expect(networkPopover).not.toBeVisible()
+        // (First check) Expect the network to be up
+        await expect(networkToggle).toContainText('Connected')
 
-      // (First check) Expect the network to be up
-      await expect(
-        networkToggleConnectedText.or(networkToggleWeakText)
-      ).toBeVisible()
+        // Click the network widget
+        await networkWidget.click()
 
-      // Click the network widget
-      await networkWidget.click()
+        // Check the modal opened.
+        await expect(networkPopover).toBeVisible()
 
-      // Check the modal opened.
-      await expect(networkPopover).toBeVisible()
+        // Click off the modal.
+        await page.mouse.click(100, 100)
+        await expect(networkPopover).not.toBeVisible()
 
-      // Click off the modal.
-      await page.mouse.click(100, 100)
-      await expect(networkPopover).not.toBeVisible()
+        // Turn off the network
+        await u.emulateNetworkConditions({
+          offline: true,
+          // values of 0 remove any active throttling. crbug.com/456324#c9
+          latency: 0,
+          downloadThroughput: -1,
+          uploadThroughput: -1,
+        })
 
-      // Turn off the network
-      await u.emulateNetworkConditions({
-        offline: true,
-        // values of 0 remove any active throttling. crbug.com/456324#c9
-        latency: 0,
-        downloadThroughput: -1,
-        uploadThroughput: -1,
-      })
+        // Expect the network to be down
+        await expect(networkToggle).toContainText('Problem')
 
-      // Expect the network to be down
-      await expect(networkToggle).toContainText('Problem')
+        // Click the network widget
+        await networkWidget.click()
 
-      // Click the network widget
-      await networkWidget.click()
+        // Check the modal opened.
+        await expect(networkPopover).toBeVisible()
 
-      // Check the modal opened.
-      await expect(networkPopover).toBeVisible()
+        // Click off the modal.
+        await page.mouse.click(0, 0)
+        await expect(networkPopover).not.toBeVisible()
 
-      // Click off the modal.
-      await page.mouse.click(0, 0)
-      await expect(networkPopover).not.toBeVisible()
+        // Turn back on the network
+        await u.emulateNetworkConditions({
+          offline: false,
+          // values of 0 remove any active throttling. crbug.com/456324#c9
+          latency: 0,
+          downloadThroughput: -1,
+          uploadThroughput: -1,
+        })
 
-      // Turn back on the network
-      await u.emulateNetworkConditions({
-        offline: false,
-        // values of 0 remove any active throttling. crbug.com/456324#c9
-        latency: 0,
-        downloadThroughput: -1,
-        uploadThroughput: -1,
-      })
+        await expect(
+          page.getByRole('button', { name: 'Start Sketch' })
+        ).not.toBeDisabled({ timeout: 15000 })
 
-      await expect(
-        page.getByRole('button', { name: 'Start Sketch' })
-      ).not.toBeDisabled({ timeout: 15000 })
+        // (Second check) expect the network to be up
+        await expect(networkToggle).toContainText('Connected')
+      }
+    )
 
-      // (Second check) expect the network to be up
-      await expect(
-        networkToggleConnectedText.or(networkToggleWeakText)
-      ).toBeVisible()
-    }
-  )
+    test(
+      'Engine disconnect & reconnect in sketch mode',
+      { tag: '@skipLocalEngine' },
+      async ({ page, homePage, toolbar, scene, cmdBar }) => {
+        const networkToggle = page.getByTestId('network-toggle')
 
-  test(
-    'Engine disconnect & reconnect in sketch mode',
-    { tag: '@skipLocalEngine' },
-    async ({ page, homePage, toolbar, scene, cmdBar }) => {
-      const networkToggle = page.getByTestId('network-toggle')
-      const networkToggleConnectedText = page.getByText('Connected')
-      const networkToggleWeakText = page.getByText('Network health (Weak)')
+        const u = await getUtils(page)
+        await page.setBodyDimensions({ width: 1200, height: 500 })
+        const PUR = 400 / 37.5 //pixeltoUnitRatio
 
-      const u = await getUtils(page)
-      await page.setBodyDimensions({ width: 1200, height: 500 })
-      const PUR = 400 / 37.5 //pixeltoUnitRatio
+        await homePage.goToModelingScene()
+        await u.waitForPageLoad()
 
-      await homePage.goToModelingScene()
-      await u.waitForPageLoad()
+        await u.openDebugPanel()
+        // click on "Start Sketch" button
+        await u.clearCommandLogs()
+        await page.getByRole('button', { name: 'Start Sketch' }).click()
+        await page.waitForTimeout(100)
 
-      await u.openDebugPanel()
-      // click on "Start Sketch" button
-      await u.clearCommandLogs()
-      await page.getByRole('button', { name: 'Start Sketch' }).click()
-      await page.waitForTimeout(100)
+        // select a plane
+        await page.mouse.click(700, 200)
 
-      // select a plane
-      await page.mouse.click(700, 200)
+        await expect(page.locator('.cm-content')).toHaveText(
+          `sketch001 = startSketchOn(XZ)`
+        )
+        await u.closeDebugPanel()
 
-      await expect(page.locator('.cm-content')).toHaveText(
-        `@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)`
-      )
-      await u.closeDebugPanel()
+        await page.waitForTimeout(500) // TODO detect animation ending, or disable animation
 
-      await page.waitForTimeout(500) // TODO detect animation ending, or disable animation
+        const startXPx = 600
+        await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
+        await expect(page.locator('.cm-content')).toHaveText(
+          `sketch001 = startSketchOn(XZ)profile001 = startProfile(sketch001, at = ${commonPoints.startAt})`
+        )
+        await page.waitForTimeout(100)
 
-      const startXPx = 600
-      await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-      await expect(page.locator('.cm-content')).toHaveText(
-        `@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfile(sketch001, at = ${commonPoints.startAt})`
-      )
-      await page.waitForTimeout(100)
+        await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
+        await page.waitForTimeout(100)
 
-      await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
-      await page.waitForTimeout(100)
-
-      await expect(
-        page.locator('.cm-content')
-      ).toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfile(sketch001, at = ${commonPoints.startAt})
+        await expect(
+          page.locator('.cm-content')
+        ).toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfile(sketch001, at = ${commonPoints.startAt})
       |> xLine(length = ${commonPoints.num1})`)
 
-      // Expect the network to be up
-      await networkToggle.hover()
-      await expect(
-        networkToggleConnectedText.or(networkToggleWeakText)
-      ).toBeVisible()
+        // Expect the network to be up
+        await expect(networkToggle).toContainText('Connected')
 
-      // simulate network down
-      await u.emulateNetworkConditions({
-        offline: true,
-        // values of 0 remove any active throttling. crbug.com/456324#c9
-        latency: 0,
-        downloadThroughput: -1,
-        uploadThroughput: -1,
-      })
+        // simulate network down
+        await u.emulateNetworkConditions({
+          offline: true,
+          // values of 0 remove any active throttling. crbug.com/456324#c9
+          latency: 0,
+          downloadThroughput: -1,
+          uploadThroughput: -1,
+        })
 
-      // Expect the network to be down
-      await networkToggle.hover()
-      await expect(networkToggle).toContainText('Problem')
+        // Expect the network to be down
+        await expect(networkToggle).toContainText('Problem')
 
-      // Ensure we are not in sketch mode
-      await expect(
-        page.getByRole('button', { name: 'Exit Sketch' })
-      ).not.toBeVisible()
-      await expect(
-        page.getByRole('button', { name: 'Start Sketch' })
-      ).toBeVisible()
+        // Ensure we are not in sketch mode
+        await expect(
+          page.getByRole('button', { name: 'Exit Sketch' })
+        ).not.toBeVisible()
+        await expect(
+          page.getByRole('button', { name: 'Start Sketch' })
+        ).toBeVisible()
 
-      // simulate network up
-      await u.emulateNetworkConditions({
-        offline: false,
-        // values of 0 remove any active throttling. crbug.com/456324#c9
-        latency: 0,
-        downloadThroughput: -1,
-        uploadThroughput: -1,
-      })
+        // simulate network up
+        await u.emulateNetworkConditions({
+          offline: false,
+          // values of 0 remove any active throttling. crbug.com/456324#c9
+          latency: 0,
+          downloadThroughput: -1,
+          uploadThroughput: -1,
+        })
 
-      // Wait for the app to be ready for use
-      await expect(
-        page.getByRole('button', { name: 'Start Sketch' })
-      ).not.toBeDisabled({ timeout: 15000 })
+        // Wait for the app to be ready for use
+        await expect(
+          page.getByRole('button', { name: 'Start Sketch' })
+        ).not.toBeDisabled({ timeout: 15000 })
 
-      // Expect the network to be up
-      await networkToggle.hover()
-      await expect(
-        networkToggleConnectedText.or(networkToggleWeakText)
-      ).toBeVisible()
+        // Expect the network to be up
+        await expect(networkToggle).toContainText('Connected')
+        await scene.settled(cmdBar)
 
-      await scene.settled(cmdBar)
+        // Click off the code pane.
+        await page.mouse.click(100, 100)
 
-      // Click off the code pane.
-      await page.mouse.click(100, 100)
+        // select a line
+        await page
+          .getByText(`startProfile(sketch001, at = ${commonPoints.startAt})`)
+          .click()
 
-      // select a line
-      await page
-        .getByText(`startProfile(sketch001, at = ${commonPoints.startAt})`)
-        .click()
+        // enter sketch again
+        await toolbar.editSketch()
 
-      // enter sketch again
-      await toolbar.editSketch()
+        // Click the line tool
+        await page
+          .getByRole('button', { name: 'line Line', exact: true })
+          .click()
 
-      // Click the line tool
-      await page.getByRole('button', { name: 'line Line', exact: true }).click()
+        await page.waitForTimeout(150)
 
-      await page.waitForTimeout(150)
+        const camCommand: EngineCommand = {
+          type: 'modeling_cmd_req',
+          cmd_id: uuidv4(),
+          cmd: {
+            type: 'default_camera_look_at',
+            center: { x: 109, y: 0, z: -152 },
+            vantage: { x: 115, y: -505, z: -152 },
+            up: { x: 0, y: 0, z: 1 },
+          },
+        }
+        const updateCamCommand: EngineCommand = {
+          type: 'modeling_cmd_req',
+          cmd_id: uuidv4(),
+          cmd: {
+            type: 'default_camera_get_settings',
+          },
+        }
+        await toolbar.openPane('debug')
+        await u.sendCustomCmd(camCommand)
+        await page.waitForTimeout(100)
+        await u.sendCustomCmd(updateCamCommand)
+        await page.waitForTimeout(100)
 
-      const camCommand: EngineCommand = {
-        type: 'modeling_cmd_req',
-        cmd_id: uuidv4(),
-        cmd: {
-          type: 'default_camera_look_at',
-          center: { x: 109, y: 0, z: -152 },
-          vantage: { x: 115, y: -505, z: -152 },
-          up: { x: 0, y: 0, z: 1 },
-        },
-      }
-      const updateCamCommand: EngineCommand = {
-        type: 'modeling_cmd_req',
-        cmd_id: uuidv4(),
-        cmd: {
-          type: 'default_camera_get_settings',
-        },
-      }
-      await toolbar.openPane('debug')
-      await u.sendCustomCmd(camCommand)
-      await page.waitForTimeout(100)
-      await u.sendCustomCmd(updateCamCommand)
-      await page.waitForTimeout(100)
-
-      // click to continue profile
-      await page.mouse.click(1007, 400)
-      await page.waitForTimeout(100)
-      // Ensure we can continue sketching
-      await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
-      await expect
-        .poll(u.normalisedEditorCode)
-        .toBe(`@settings(defaultLengthUnit = in)
-
-
-sketch001 = startSketchOn(XZ)
+        // click to continue profile
+        await page.mouse.click(1007, 400)
+        await page.waitForTimeout(100)
+        // Ensure we can continue sketching
+        await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
+        await expect
+          .poll(u.normalisedEditorCode)
+          .toBe(`sketch001 = startSketchOn(XZ)
 profile001 = startProfile(sketch001, at = [12.34, -12.34])
   |> xLine(length = 12.34)
   |> line(end = [-12.34, 12.34])
 
 `)
-      await page.waitForTimeout(100)
-      await page.mouse.click(startXPx, 500 - PUR * 20)
+        await page.waitForTimeout(100)
+        await page.mouse.click(startXPx, 500 - PUR * 20)
 
-      await expect
-        .poll(u.normalisedEditorCode)
-        .toBe(`@settings(defaultLengthUnit = in)
-
-
-sketch001 = startSketchOn(XZ)
+        await expect
+          .poll(u.normalisedEditorCode)
+          .toBe(`sketch001 = startSketchOn(XZ)
 profile001 = startProfile(sketch001, at = [12.34, -12.34])
   |> xLine(length = 12.34)
   |> line(end = [-12.34, 12.34])
@@ -259,105 +238,22 @@ profile001 = startProfile(sketch001, at = [12.34, -12.34])
 
 `)
 
-      // Unequip line tool
-      await page.keyboard.press('Escape')
-      // Make sure we didn't pop out of sketch mode.
-      await expect(
-        page.getByRole('button', { name: 'Exit Sketch' })
-      ).toBeVisible()
-      await expect(
-        page.getByRole('button', { name: 'line Line', exact: true })
-      ).not.toHaveAttribute('aria-pressed', 'true')
+        // Unequip line tool
+        await page.keyboard.press('Escape')
+        // Make sure we didn't pop out of sketch mode.
+        await expect(
+          page.getByRole('button', { name: 'Exit Sketch' })
+        ).toBeVisible()
+        await expect(
+          page.getByRole('button', { name: 'line Line', exact: true })
+        ).not.toHaveAttribute('aria-pressed', 'true')
 
-      // Exit sketch
-      await page.keyboard.press('Escape')
-      await expect(
-        page.getByRole('button', { name: 'Exit Sketch' })
-      ).not.toBeVisible()
-    }
-  )
-
-  test(
-    'Paused stream freezes view frame, unpause reconnect is seamless to user',
-    { tag: ['@electron', '@skipLocalEngine'] },
-    async ({ page, homePage, scene, cmdBar, toolbar, tronApp }) => {
-      const networkToggle = page.getByTestId('network-toggle')
-      const networkToggleConnectedText = page.getByText('Connected')
-      const networkToggleWeakText = page.getByText('Network health (Weak)')
-
-      if (!tronApp) {
-        fail()
+        // Exit sketch
+        await page.keyboard.press('Escape')
+        await expect(
+          page.getByRole('button', { name: 'Exit Sketch' })
+        ).not.toBeVisible()
       }
-
-      await tronApp.cleanProjectDir({
-        app: {
-          stream_idle_mode: 5000,
-        },
-      })
-
-      await page.addInitScript(async () => {
-        localStorage.setItem(
-          'persistCode',
-          `sketch001 = startSketchOn(XY)
-profile001 = startProfile(sketch001, at = [0.0, 0.0])
-  |> line(end = [10.0, 0])
-  |> line(end = [0, 10.0])
-  |> close()`
-        )
-      })
-
-      const dim = { width: 1200, height: 500 }
-      await page.setBodyDimensions(dim)
-
-      await test.step('Go to modeling scene', async () => {
-        await homePage.goToModelingScene()
-        await scene.settled(cmdBar)
-      })
-
-      await test.step('Verify pausing behavior', async () => {
-        // Wait 5s + 1s to pause.
-        await page.waitForTimeout(6000)
-
-        // We should now be paused. To the user, it should appear we're still
-        // connected.
-        await networkToggle.hover()
-        await expect(
-          networkToggleConnectedText.or(networkToggleWeakText)
-        ).toBeVisible()
-
-        const center = {
-          x: dim.width / 2,
-          y: dim.height / 2,
-        }
-
-        let probe = { x: 0, y: 0 }
-
-        // ... and the model's still visibly there
-        probe.x = center.x + dim.width / 100
-        probe.y = center.y
-        await scene.expectPixelColor(TEST_COLORS.GREY, probe, 15)
-        probe = { ...center }
-
-        // Now move the mouse around to unpause!
-        await circleMove(page, probe.x, probe.y, 20, 10)
-
-        // ONCE AGAIN! Check the view area hasn't changed at all.
-        // Check the pixel a couple times as it reconnects.
-        // NOTE: Remember, idle behavior is still on at this point -
-        // if this test takes longer than 5s shit WILL go south!
-        probe.x = center.x + dim.width / 100
-        probe.y = center.y
-        await scene.expectPixelColor(TEST_COLORS.GREY, probe, 15)
-        await page.waitForTimeout(1000)
-        await scene.expectPixelColor(TEST_COLORS.GREY, probe, 15)
-        probe = { ...center }
-
-        // Ensure we're still connected
-        await networkToggle.hover()
-        await expect(
-          networkToggleConnectedText.or(networkToggleWeakText)
-        ).toBeVisible()
-      })
-    }
-  )
-})
+    )
+  }
+)

e2e/playwright/test-utils.ts

@@ -44,8 +44,6 @@ export const lowerRightMasks = (page: Page) => [
 export type TestColor = [number, number, number]
 export const TEST_COLORS: { [key: string]: TestColor } = {
   WHITE: [249, 249, 249],
-  OFFWHITE: [237, 237, 237],
-  GREY: [142, 142, 142],
   YELLOW: [255, 255, 0],
   BLUE: [0, 0, 255],
   DARK_MODE_BKGD: [27, 27, 27],

e2e/playwright/testing-constraints.spec.ts

@@ -57,7 +57,7 @@ test.describe('Testing constraints', () => {
       .click()
 
     await expect(page.locator('.cm-content')).toHaveText(
-      `length001 = 20sketch001 = startSketchOn(XY)  |> startProfile(at = [-10, -10])  |> line(end = [20, 0])  |> angledLine(angle = 90deg, length = length001)  |> xLine(length = -20)`
+      `length001 = 20sketch001 = startSketchOn(XY)  |> startProfile(at = [-10, -10])  |> line(end = [20, 0])  |> angledLine(angle = 90, length = length001)  |> xLine(length = -20)`
     )
 
     // Make sure we didn't pop out of sketch mode.
@@ -852,7 +852,7 @@ part002 = startSketchOn(XZ)
   test.describe('Two segment - no modal constraints', () => {
     const cases = [
       {
-        codeAfter: `|> angledLine(angle = 83deg, length = segLen(seg01))`,
+        codeAfter: `|> angledLine(angle = 83, length = segLen(seg01))`,
         constraintName: 'Equal Length',
       },
       {
@@ -1174,7 +1174,7 @@ test.describe('Electron constraint tests', () => {
         await cmdBar.progressCmdBar()
         await editor.expectEditor.toContain('length001 = 15.3')
         await editor.expectEditor.toContain(
-          '|> angledLine(angle = 9deg, length = length001)'
+          '|> angledLine(angle = 9, length = length001)'
         )
       })
 

e2e/playwright/testing-gizmo.spec.ts

@@ -259,7 +259,7 @@ test.describe(`Testing gizmo, fixture-based`, () => {
         `@settings(defaultLengthUnit = in)
         sketch002 = startSketchOn(XZ)
           |> startProfile(at = [-108.83, -57.48])
-          |> angledLine(angle = 0deg, length = 105.13, tag = $rectangleSegmentA001)
+          |> angledLine(angle = 0, length = 105.13, tag = $rectangleSegmentA001)
           |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 77.9)
           |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
           |> close()

e2e/playwright/testing-segment-overlays.spec.ts

@@ -207,17 +207,17 @@ test.describe('Testing segment overlays', () => {
       part001 = startSketchOn(XZ)
         |> startProfile(at = [5 + 0, 20 + 0])
         |> line(end = [0.5, -14 + 0])
-        |> angledLine(angle = 3deg + 0, length = 32 + 0)
+        |> angledLine(angle = 3 + 0, length = 32 + 0)
         |> line(endAbsolute = [5 + 33, 20 + 11.5 + 0])
         |> xLine(endAbsolute = 5 + 9 - 5)
         |> yLine(endAbsolute = 20 + -10.77, tag = $a)
         |> xLine(length = 26.04)
         |> yLine(length = 21.14 + 0)
-        |> angledLine(angle = 181deg + 0, lengthX = 23.14)
+        |> angledLine(angle = 181 + 0, lengthX = 23.14)
         |> angledLine(angle = -91, lengthY = 19 + 0)
-        |> angledLine(angle = 3deg + 0, endAbsoluteX = 5 + 26)
-        |> angledLine(angle = 89deg, endAbsoluteY = 20 + 9.14 + 0)
-        |> angledLineThatIntersects(angle = 4.14deg, intersectTag = a, offset = 9)
+        |> angledLine(angle = 3 + 0, endAbsoluteX = 5 + 26)
+        |> angledLine(angle = 89, endAbsoluteY = 20 + 9.14 + 0)
+        |> angledLineThatIntersects(angle = 4.14, intersectTag = a, offset = 9)
         |> tangentialArc(endAbsolute = [5 + 3.14 + 13, 20 + 3.14])
       `
         )
@@ -237,7 +237,7 @@ test.describe('Testing segment overlays', () => {
       await page.getByRole('button', { name: 'Edit Sketch' }).click()
       await page.waitForTimeout(500)
 
-      await expect(page.getByTestId('segment-overlay')).toHaveCount(13)
+      await expect(page.getByTestId('segment-overlay')).toHaveCount(14)
 
       const clickUnconstrained = _clickUnconstrained(page, editor)
       const clickConstrained = _clickConstrained(page, editor)
@@ -295,9 +295,8 @@ test.describe('Testing segment overlays', () => {
       await clickConstrained({
         hoverPos: { x: angledLine.x, y: angledLine.y },
         constraintType: 'angle',
-        expectBeforeUnconstrained:
-          'angledLine(angle = 3deg + 0, length = 32 + 0)',
-        expectAfterUnconstrained: 'angledLine(angle = 3deg, length = 32 + 0)',
+        expectBeforeUnconstrained: 'angledLine(angle = 3 + 0, length = 32 + 0)',
+        expectAfterUnconstrained: 'angledLine(angle = 3, length = 32 + 0)',
         expectFinal: 'angledLine(angle = angle001, length = 32 + 0)',
         ang: ang + 180,
         locator: '[data-overlay-toolbar-index="1"]',
@@ -384,7 +383,7 @@ test.describe('Testing segment overlays', () => {
       |> yLine(endAbsolute = -10.77, tag = $a)
       |> xLine(length = 26.04)
       |> yLine(length = 21.14 + 0)
-      |> angledLine(angle = 181deg + 0, lengthX = 23.14)
+      |> angledLine(angle = 181 + 0, lengthX = 23.14)
       `
         )
       })
@@ -403,7 +402,7 @@ test.describe('Testing segment overlays', () => {
       await page.getByRole('button', { name: 'Edit Sketch' }).click()
       await page.waitForTimeout(500)
 
-      await expect(page.getByTestId('segment-overlay')).toHaveCount(8)
+      await expect(page.getByTestId('segment-overlay')).toHaveCount(9)
 
       const clickUnconstrained = _clickUnconstrained(page, editor)
 
@@ -451,17 +450,17 @@ test.describe('Testing segment overlays', () => {
       part001 = startSketchOn(XZ)
         |> startProfile(at = [0, 0])
         |> line(end = [0.5, -14 + 0])
-        |> angledLine(angle = 3deg + 0, length = 32 + 0)
+        |> angledLine(angle = 3 + 0, length = 32 + 0)
         |> line(endAbsolute = [33, 11.5 + 0])
         |> xLine(endAbsolute = 9 - 5)
         |> yLine(endAbsolute = -10.77, tag = $a)
         |> xLine(length = 26.04)
         |> yLine(length = 21.14 + 0)
-        |> angledLine(angle = 181deg + 0, lengthX = 23.14)
+        |> angledLine(angle = 181 + 0, lengthX = 23.14)
         |> angledLine(angle = -91, lengthY = 19 + 0)
-        |> angledLine(angle = 3deg + 0, endAbsoluteX = 26)
-        |> angledLine(angle = 89deg, endAbsoluteY = 9.14 + 0)
-        |> angledLineThatIntersects(angle = 4.14deg, intersectTag = a, offset = 9)
+        |> angledLine(angle = 3 + 0, endAbsoluteX = 26)
+        |> angledLine(angle = 89, endAbsoluteY = 9.14 + 0)
+        |> angledLineThatIntersects(angle = 4.14, intersectTag = a, offset = 9)
         |> tangentialArc(endAbsolute = [3.14 + 13, 3.14])
       `
         )
@@ -483,7 +482,7 @@ test.describe('Testing segment overlays', () => {
       await page.getByRole('button', { name: 'Edit Sketch' }).click()
       await page.waitForTimeout(500)
 
-      await expect(page.getByTestId('segment-overlay')).toHaveCount(13)
+      await expect(page.getByTestId('segment-overlay')).toHaveCount(14)
 
       const clickUnconstrained = _clickUnconstrained(page, editor)
       const clickConstrained = _clickConstrained(page, editor)
@@ -512,7 +511,7 @@ test.describe('Testing segment overlays', () => {
         hoverPos: { x: angledLineOfXLength.x, y: angledLineOfXLength.y },
         constraintType: 'angle',
         expectBeforeUnconstrained:
-          'angledLine(angle = 181deg + 0, lengthX = 23.14)',
+          'angledLine(angle = 181 + 0, lengthX = 23.14)',
         expectAfterUnconstrained: 'angledLine(angle = -179, lengthX = 23.14)',
         expectFinal: 'angledLine(angle = angle001, lengthX = 23.14)',
         ang: ang + 180,
@@ -572,17 +571,17 @@ test.describe('Testing segment overlays', () => {
       part001 = startSketchOn(XZ)
         |> startProfile(at = [0, 0])
         |> line(end = [0.5, -14 + 0])
-        |> angledLine(angle = 3deg + 0, length = 32 + 0)
+        |> angledLine(angle = 3 + 0, length = 32 + 0)
         |> line(endAbsolute = [33, 11.5 + 0])
         |> xLine(endAbsolute = 9 - 5)
         |> yLine(endAbsolute = -10.77, tag = $a)
         |> xLine(length = 26.04)
         |> yLine(length = 21.14 + 0)
-        |> angledLine(angle = 181deg + 0, lengthX = 23.14)
+        |> angledLine(angle = 181 + 0, lengthX = 23.14)
         |> angledLine(angle = -91, lengthY = 19 + 0)
-        |> angledLine(angle = 3deg + 0, endAbsoluteX = 26)
-        |> angledLine(angle = 89deg, endAbsoluteY = 9.14 + 0)
-        |> angledLineThatIntersects(angle = 4.14deg, intersectTag = a, offset = 9)
+        |> angledLine(angle = 3 + 0, endAbsoluteX = 26)
+        |> angledLine(angle = 89, endAbsoluteY = 9.14 + 0)
+        |> angledLineThatIntersects(angle = 4.14, intersectTag = a, offset = 9)
         |> tangentialArc(endAbsolute = [3.14 + 13, 1.14])
       `
         )
@@ -603,7 +602,7 @@ test.describe('Testing segment overlays', () => {
       await page.getByRole('button', { name: 'Edit Sketch' }).click()
       await page.waitForTimeout(500)
 
-      await expect(page.getByTestId('segment-overlay')).toHaveCount(13)
+      await expect(page.getByTestId('segment-overlay')).toHaveCount(14)
 
       const clickUnconstrained = _clickUnconstrained(page, editor)
       const clickConstrained = _clickConstrained(page, editor)
@@ -617,8 +616,8 @@ test.describe('Testing segment overlays', () => {
         hoverPos: { x: angledLineToX.x, y: angledLineToX.y },
         constraintType: 'angle',
         expectBeforeUnconstrained:
-          'angledLine(angle = 3deg + 0, endAbsoluteX = 26)',
-        expectAfterUnconstrained: 'angledLine(angle = 3deg, endAbsoluteX = 26)',
+          'angledLine(angle = 3 + 0, endAbsoluteX = 26)',
+        expectAfterUnconstrained: 'angledLine(angle = 3, endAbsoluteX = 26)',
         expectFinal: 'angledLine(angle = angle001, endAbsoluteX = 26)',
         ang: ang + 180,
         locator: '[data-overlay-toolbar-index="9"]',
@@ -642,9 +641,9 @@ test.describe('Testing segment overlays', () => {
       await clickUnconstrained({
         hoverPos: { x: angledLineToY.x, y: angledLineToY.y },
         constraintType: 'angle',
-        expectBeforeUnconstrained: 'angledLine(angle = 89deg, to = 9.14 + 0)',
+        expectBeforeUnconstrained: 'angledLine(angle = 89, to = 9.14 + 0)',
         expectAfterUnconstrained: 'angledLine(angle = angle002, to = 9.14 + 0)',
-        expectFinal: 'angledLine(angle = 89deg, to = 9.14 + 0)',
+        expectFinal: 'angledLine(angle = 89, to = 9.14 + 0)',
         steps: process.platform === 'darwin' ? 8 : 9,
         ang: ang + 180,
         locator: '[data-overlay-toolbar-index="10"]',
@@ -654,10 +653,9 @@ test.describe('Testing segment overlays', () => {
         hoverPos: { x: angledLineToY.x, y: angledLineToY.y },
         constraintType: 'yAbsolute',
         expectBeforeUnconstrained:
-          'angledLine(angle = 89deg, endAbsoluteY = 9.14 + 0)',
-        expectAfterUnconstrained:
-          'angledLine(angle = 89deg, endAbsoluteY = 9.14)',
-        expectFinal: 'angledLine(angle = 89deg, endAbsoluteY = yAbs001)',
+          'angledLine(angle = 89, endAbsoluteY = 9.14 + 0)',
+        expectAfterUnconstrained: 'angledLine(angle = 89, endAbsoluteY = 9.14)',
+        expectFinal: 'angledLine(angle = 89, endAbsoluteY = yAbs001)',
         ang: ang + 180,
         locator: '[data-overlay-toolbar-index="10"]',
       })
@@ -673,7 +671,7 @@ test.describe('Testing segment overlays', () => {
           y: angledLineThatIntersects.y,
         },
         constraintType: 'angle',
-        expectBeforeUnconstrained: `angledLineThatIntersects(angle = 4.14deg, intersectTag = a, offset = 9)`,
+        expectBeforeUnconstrained: `angledLineThatIntersects(angle = 4.14, intersectTag = a, offset = 9)`,
         expectAfterUnconstrained: `angledLineThatIntersects(angle = angle003, intersectTag = a,offset = 9)`,
         expectFinal: `angledLineThatIntersects(angle = -176, offset = 9, intersectTag = a)`,
         ang: ang + 180,
@@ -707,17 +705,17 @@ test.describe('Testing segment overlays', () => {
       part001 = startSketchOn(XZ)
         |> startProfile(at = [0, 0])
         |> line(end = [0.5, -14 + 0])
-        |> angledLine(angle = 3deg + 0, length = 32 + 0)
+        |> angledLine(angle = 3 + 0, length = 32 + 0)
         |> line(endAbsolute = [33, 11.5 + 0])
         |> xLine(endAbsolute = 9 - 5)
         |> yLine(endAbsolute = -10.77, tag = $a)
         |> xLine(length = 26.04)
         |> yLine(length = 21.14 + 0)
-        |> angledLine(angle = 181deg + 0, lengthX = 23.14)
+        |> angledLine(angle = 181 + 0, lengthX = 23.14)
         |> angledLine(angle = -91, lengthY = 19 + 0)
-        |> angledLine(angle = 3deg + 0, endAbsoluteX = 26)
-        |> angledLine(angle = 89deg, endAbsoluteY = 9.14 + 0)
-        |> angledLineThatIntersects(angle = 4.14deg, intersectTag = a, offset = 9)
+        |> angledLine(angle = 3 + 0, endAbsoluteX = 26)
+        |> angledLine(angle = 89, endAbsoluteY = 9.14 + 0)
+        |> angledLineThatIntersects(angle = 4.14, intersectTag = a, offset = 9)
         |> tangentialArc(endAbsolute = [3.14 + 13, -3.14])
       `
         )
@@ -810,7 +808,7 @@ profile001 = startProfile(sketch001, at = [56.37, 120.33])
       await page.getByRole('button', { name: 'Edit Sketch' }).click()
       await page.waitForTimeout(500)
 
-      await expect(page.getByTestId('segment-overlay')).toHaveCount(5)
+      await expect(page.getByTestId('segment-overlay')).toHaveCount(6)
 
       const clickUnconstrained = _clickUnconstrained(page, editor)
       const clickConstrained = _clickConstrained(page, editor)
@@ -994,17 +992,17 @@ part001 = startSketchOn(XZ)
 part001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [0.5, -14 + 0])
-  |> angledLine(angle = 3deg + 0, length = 32 + 0)
+  |> angledLine(angle = 3 + 0, length = 32 + 0)
   |> line(endAbsolute = [33, 11.5 + 0])
   |> xLine(endAbsolute = 9 - 5)
   |> yLine(endAbsolute = -10.77, tag = $a)
   |> xLine(length = 26.04)
   |> yLine(length = 21.14 + 0)
-  |> angledLine(angle = 181deg + 0, lengthX = 23.14)
+  |> angledLine(angle = 181 + 0, lengthX = 23.14)
   |> angledLine(angle = -91, lengthY = 19 + 0)
-  |> angledLine(angle = 3deg + 0, endAbsoluteX = 26)
-  |> angledLine(angle = 89deg, endAbsoluteY = 9.14 + 0)
-  |> angledLineThatIntersects(angle = 4.14deg, intersectTag = a, offset = 9)
+  |> angledLine(angle = 3 + 0, endAbsoluteX = 26)
+  |> angledLine(angle = 89, endAbsoluteY = 9.14 + 0)
+  |> angledLineThatIntersects(angle = 4.14, intersectTag = a, offset = 9)
   |> tangentialArc(endAbsolute = [3.14 + 13, 1.14])
   |> arc(interiorAbsolute = [16.25, 5.12], endAbsolute = [21.61, 4.15])
   |> arc(angleStart = 40.27, angleEnd = -38.05, radius = 9.03)
@@ -1080,7 +1078,7 @@ part001 = startSketchOn(XZ)
       ang = await u.getAngle(`[data-overlay-index="${overlayIndex}"]`)
       await deleteSegmentSequence({
         hoverPos: { x: segmentToDelete.x, y: segmentToDelete.y },
-        codeToBeDeleted: `angledLineThatIntersects(angle = 4.14deg, intersectTag = a, offset = 9)`,
+        codeToBeDeleted: `angledLineThatIntersects(angle = 4.14, intersectTag = a, offset = 9)`,
         stdLibFnName: 'angledLineThatIntersects',
         ang: ang + 180,
         steps: 7,
@@ -1093,7 +1091,7 @@ part001 = startSketchOn(XZ)
       ang = await u.getAngle(`[data-overlay-index="${overlayIndex}"]`)
       await deleteSegmentSequence({
         hoverPos: { x: segmentToDelete.x, y: segmentToDelete.y },
-        codeToBeDeleted: 'angledLine(angle = 89deg, endAbsoluteY = 9.14 + 0)',
+        codeToBeDeleted: 'angledLine(angle = 89, endAbsoluteY = 9.14 + 0)',
         stdLibFnName: 'angledLineToY',
         ang: ang + 180,
         locator: `[data-overlay-toolbar-index="${overlayIndex}"]`,
@@ -1105,7 +1103,7 @@ part001 = startSketchOn(XZ)
       ang = await u.getAngle(`[data-overlay-index="${overlayIndex}"]`)
       await deleteSegmentSequence({
         hoverPos: { x: segmentToDelete.x, y: segmentToDelete.y },
-        codeToBeDeleted: 'angledLine(angle = 3deg + 0, endAbsoluteX = 26)',
+        codeToBeDeleted: 'angledLine(angle = 3 + 0, endAbsoluteX = 26)',
         stdLibFnName: 'angledLineToX',
         ang: ang + 180,
         locator: `[data-overlay-toolbar-index="${overlayIndex}"]`,
@@ -1129,7 +1127,7 @@ part001 = startSketchOn(XZ)
       ang = await u.getAngle(`[data-overlay-index="${overlayIndex}"]`)
       await deleteSegmentSequence({
         hoverPos: { x: segmentToDelete.x, y: segmentToDelete.y },
-        codeToBeDeleted: 'angledLine(angle = 181deg + 0, lengthX = 23.14)',
+        codeToBeDeleted: 'angledLine(angle = 181 + 0, lengthX = 23.14)',
         stdLibFnName: 'angledLineOfXLength',
         ang: ang + 180,
         locator: `[data-overlay-toolbar-index="${overlayIndex}"]`,
@@ -1224,7 +1222,7 @@ part001 = startSketchOn(XZ)
       ang = await u.getAngle(`[data-overlay-index="${overlayIndex}"]`)
       await deleteSegmentSequence({
         hoverPos: { x: segmentToDelete.x, y: segmentToDelete.y },
-        codeToBeDeleted: 'angledLine(angle = 3deg + 0, length = 32 + 0)',
+        codeToBeDeleted: 'angledLine(angle = 3 + 0, length = 32 + 0)',
         stdLibFnName: 'angledLine',
         ang: ang + 180,
         locator: `[data-overlay-toolbar-index="${overlayIndex}"]`,
@@ -1247,19 +1245,19 @@ part001 = startSketchOn(XZ)
   test.describe('Testing delete with dependent segments', () => {
     const cases = [
       'line(end = [22, 2], tag = $seg01)',
-      'angledLine(angle = 5deg, length = 23.03, tag = $seg01)',
+      'angledLine(angle = 5, length = 23.03, tag = $seg01)',
       'xLine(length = 23, tag = $seg01)',
       'yLine(length = -8, tag = $seg01)',
       'xLine(endAbsolute = 30, tag = $seg01)',
       'yLine(endAbsolute = -4, tag = $seg01)',
-      'angledLine(angle = 3deg, lengthX = 30, tag = $seg01)',
-      'angledLine(angle = 3deg, lengthY = 1.5, tag = $seg01)',
-      'angledLine(angle = 3deg, endAbsoluteX = 30, tag = $seg01)',
-      'angledLine(angle = 3deg, endAbsoluteY = 7, tag = $seg01)',
+      'angledLine(angle = 3, lengthX = 30, tag = $seg01)',
+      'angledLine(angle = 3, lengthY = 1.5, tag = $seg01)',
+      'angledLine(angle = 3, endAbsoluteX = 30, tag = $seg01)',
+      'angledLine(angle = 3, endAbsoluteY = 7, tag = $seg01)',
     ]
     for (const doesHaveTagOutsideSketch of [true, false]) {
       for (const lineOfInterest of cases) {
-        const isObj = lineOfInterest.includes('{ angle = 3deg,')
+        const isObj = lineOfInterest.includes('{ angle = 3,')
         test(`${lineOfInterest}${isObj ? '-[obj-input]' : ''}${
           doesHaveTagOutsideSketch ? '-[tagOutsideSketch]' : ''
         }`, async ({ page, editor, homePage }) => {
@@ -1309,7 +1307,7 @@ part001 = startSketchOn(XZ)
             .toBe(true)
           await page.getByRole('button', { name: 'Edit Sketch' }).click()
 
-          await expect(page.getByTestId('segment-overlay')).toHaveCount(3)
+          await expect(page.getByTestId('segment-overlay')).toHaveCount(4)
           const segmentToDelete = await u.getBoundingBox(
             `[data-overlay-index="0"]`
           )
@@ -1385,7 +1383,7 @@ part001 = startSketchOn(XZ)
       },
 
       {
-        before: `angledLine(angle = 5deg + 0, length = 23.03 + 0, tag = $seg01)`,
+        before: `angledLine(angle = 5 + 0, length = 23.03 + 0, tag = $seg01)`,
         after: `line(end = [22.94, 2.01], tag = $seg01)`,
       },
       {
@@ -1405,19 +1403,19 @@ part001 = startSketchOn(XZ)
         after: `line(end = [0, -10], tag = $seg01)`,
       },
       {
-        before: `angledLine(angle = 3deg + 0, lengthX = 30 + 0, tag = $seg01)`,
+        before: `angledLine(angle = 3 + 0, lengthX = 30 + 0, tag = $seg01)`,
         after: `line(end = [30, 1.57], tag = $seg01)`,
       },
       {
-        before: `angledLine(angle = 3deg + 0, lengthY = 1.5 + 0, tag = $seg01)`,
+        before: `angledLine(angle = 3 + 0, lengthY = 1.5 + 0, tag = $seg01)`,
         after: `line(end = [28.62, 1.5], tag = $seg01)`,
       },
       {
-        before: `angledLine(angle = 3deg + 0, endAbsoluteX = 30 + 0, tag = $seg01)`,
+        before: `angledLine(angle = 3 + 0, endAbsoluteX = 30 + 0, tag = $seg01)`,
         after: `line(end = [25, 1.31], tag = $seg01)`,
       },
       {
-        before: `angledLine(angle = 3deg + 0, endAbsoluteY = 7 + 0, tag = $seg01)`,
+        before: `angledLine(angle = 3 + 0, endAbsoluteY = 7 + 0, tag = $seg01)`,
         after: `line(end = [19.08, 1], tag = $seg01)`,
       },
     ]

e2e/playwright/testing-selections.spec.ts

@@ -307,15 +307,15 @@ part009 = startSketchOn(XY)
   |> startProfile(at = [pipeLargeDia - (thickness / 2), 38])
   |> line(end = [thickness, 0])
   |> line(end = [0, -1])
-  |> angledLine(angle = 60deg, endAbsoluteX = pipeSmallDia + thickness)
+  |> angledLine(angle = 60, endAbsoluteX = pipeSmallDia + thickness)
   |> line(end = [0, -pipeLength])
   |> angledLine(angle = -60, endAbsoluteX = pipeLargeDia + thickness)
   |> line(end = [0, -1])
   |> line(end = [-thickness, 0])
   |> line(end = [0, 1])
-  |> angledLine(angle = 120deg, endAbsoluteX =  pipeSmallDia)
+  |> angledLine(angle = 120, endAbsoluteX =  pipeSmallDia)
   |> line(end = [0, pipeLength])
-  |> angledLine(angle = 60deg, endAbsoluteX =  pipeLargeDia)
+  |> angledLine(angle = 60, endAbsoluteX =  pipeLargeDia)
   |> close()
 rev = revolve(part009, axis = Y)
 sketch006 = startSketchOn(XY)
@@ -325,7 +325,7 @@ profile001 = circle(
   radius = 17.96
 )
 profile002 = startProfile(sketch006, at = [86.92, -63.81])
-  |> angledLine(angle = 0deg, length = 63.81, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 63.81, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 17.05)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -464,7 +464,7 @@ profile002 = startProfile(sketch002, at = [-11.08, 2.39])
   |> close()
 extrude001 = extrude(profile002, length = 15)
 profile001 = startProfile(sketch001, at = [7.49, 9.96])
-  |> angledLine(angle = 0deg, length = 5.05, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 5.05, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 4.81)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -513,16 +513,16 @@ profile001 = startProfile(sketch001, at = [7.49, 9.96])
 part001 = startSketchOn(XZ)
   |> startProfile(at = [20, 0])
   |> line(end = [7.13, 4 + 0])
-  |> angledLine(angle = 3deg + 0, length = 3.14 + 0 )
+  |> angledLine(angle = 3 + 0, length = 3.14 + 0 )
   |> line(endAbsolute = [20.14 + 0, -0.14 + 0])
   |> xLine(endAbsolute = 29 + 0)
   |> yLine(length = -3.14 + 0, tag = $a)
   |> xLine(length = 1.63)
-  |> angledLine(angle = 3deg + 0, lengthX = 3.14)
-  |> angledLine(angle = 30deg, lengthY = 3 + 0)
-  |> angledLine(angle = 22.14deg + 0, endAbsoluteX =  12)
-  |> angledLine(angle = 30deg, endAbsoluteY =  11.14)
-  |> angledLineThatIntersects(angle = 3.14deg, intersectTag = a, offset = 0)
+  |> angledLine(angle = 3 + 0, lengthX = 3.14)
+  |> angledLine(angle = 30, lengthY = 3 + 0)
+  |> angledLine(angle = 22.14 + 0, endAbsoluteX =  12)
+  |> angledLine(angle = 30, endAbsoluteY =  11.14)
+  |> angledLineThatIntersects(angle = 3.14, intersectTag = a, offset = 0)
   |> tangentialArc(endAbsolute = [13.14 + 0, 13.14])
   |> close()
   |> extrude(length = 5 + 7)
@@ -655,7 +655,7 @@ part001 = startSketchOn(XZ)
       'flatExtrusionFace',
       flatExtrusionFace,
       `angledLineThatIntersects(angle=3.14,intersectTag=a,offset=0)extrude(length=5+7)`,
-      'angledLineThatIntersects(angle = 3.14deg, intersectTag = a, offset = 0)'
+      'angledLineThatIntersects(angle = 3.14, intersectTag = a, offset = 0)'
     )
 
     await checkCodeAtHoverPosition(
@@ -707,19 +707,19 @@ part001 = startSketchOn(XZ)
       'straightSegmentEdge',
       straightSegmentEdge,
       `angledLine(angle=30,endAbsoluteY=11.14)`,
-      'angledLine(angle = 30deg, endAbsoluteY =  11.14)'
+      'angledLine(angle = 30, endAbsoluteY =  11.14)'
     )
     await checkCodeAtHoverPosition(
       'straightSegmentOppositeEdge',
       straightSegmentOppositeEdge,
       `angledLine(angle=30,endAbsoluteY=11.14)`,
-      'angledLine(angle = 30deg, endAbsoluteY =  11.14)'
+      'angledLine(angle = 30, endAbsoluteY =  11.14)'
     )
     await checkCodeAtHoverPosition(
       'straightSegmentAdjacentEdge',
       straightSegmentAdjacentEdge,
       `angledLineThatIntersects(angle=3.14,intersectTag=a,offset=0)`,
-      'angledLineThatIntersects(angle = 3.14deg, intersectTag = a, offset = 0)'
+      'angledLineThatIntersects(angle = 3.14, intersectTag = a, offset = 0)'
     )
 
     await page.waitForTimeout(200)
@@ -728,7 +728,7 @@ part001 = startSketchOn(XZ)
     await u.codeLocator.fill(`@settings(defaultLengthUnit = in)
     sketch001 = startSketchOn(XZ)
     |> startProfile(at = [75.8, 317.2]) // [$startCapTag, $EndCapTag]
-    |> angledLine(angle = 0deg, length = 268.43, tag = $rectangleSegmentA001)
+    |> angledLine(angle = 0, length = 268.43, tag = $rectangleSegmentA001)
     |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 217.26, tag = $seg01)
     |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $yo)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)

public/kcl-samples/80-20-rail/main.kcl

@@ -19,7 +19,7 @@ fn rail8020(originStart, railHeight, railLength) {
     |> xLine(length = 0.06 * railHeight, tag = $edge1)
     |> yLine(length = 0.087 * railHeight, tag = $edge2)
     |> xLine(length = -0.183 * railHeight, tag = $edge3)
-    |> angledLine(angle = 45deg, endAbsoluteY = (1 - 0.356) / 2 * railHeight + originStart[1], tag = $edge4)
+    |> angledLine(angle = 45, endAbsoluteY = (1 - 0.356) / 2 * railHeight + originStart[1], tag = $edge4)
     |> xLine(length = 0.232 * railHeight, tag = $edge5)
     |> angledLine(angle = -45, endAbsoluteY = 0.087 * railHeight + originStart[1], tag = $edge6)
     |> xLine(length = -0.183 * railHeight, tag = $edge7)
@@ -37,9 +37,9 @@ fn rail8020(originStart, railHeight, railLength) {
     |> yLine(length = 0.06 * railHeight, tag = $edge9)
     |> xLine(length = -0.087 * railHeight, tag = $edge10)
     |> yLine(length = -0.183 * railHeight, tag = $edge11) // edge11
-    |> angledLine(angle = 135deg, endAbsoluteX = ((1 - 0.356) / 2 + 0.356) * railHeight + originStart[0], tag = $edge12) // edge12
+    |> angledLine(angle = 135, endAbsoluteX = ((1 - 0.356) / 2 + 0.356) * railHeight + originStart[0], tag = $edge12) // edge12
     |> yLine(length = 0.232 * railHeight, tag = $edge13) // 13
-    |> angledLine(angle = 45deg, endAbsoluteX = (1 - 0.087) * railHeight + originStart[0], tag = $edge14) // 14
+    |> angledLine(angle = 45, endAbsoluteX = (1 - 0.087) * railHeight + originStart[0], tag = $edge14) // 14
     |> yLine(length = -0.183 * railHeight, tag = $edge15) // 15
     |> xLine(length = 0.087 * railHeight, tag = $edge16)
     |> yLine(length = 0.06 * railHeight)
@@ -55,9 +55,9 @@ fn rail8020(originStart, railHeight, railLength) {
     |> xLine(length = -0.06 * railHeight, tag = $edge17)
     |> yLine(length = -0.087 * railHeight, tag = $edge18)
     |> xLine(length = 0.183 * railHeight, tag = $edge19)
-    |> angledLine(angle = 45deg, endAbsoluteY = ((1 - 0.356) / 2 + 0.356) * railHeight + originStart[1], tag = $edge20)
+    |> angledLine(angle = 45, endAbsoluteY = ((1 - 0.356) / 2 + 0.356) * railHeight + originStart[1], tag = $edge20)
     |> xLine(length = -0.232 * railHeight, tag = $edge21)
-    |> angledLine(angle = 135deg, endAbsoluteY = (1 - 0.087) * railHeight + originStart[1], tag = $edge22)
+    |> angledLine(angle = 135, endAbsoluteY = (1 - 0.087) * railHeight + originStart[1], tag = $edge22)
     |> xLine(length = 0.183 * railHeight, tag = $edge23)
     |> yLine(length = 0.087 * railHeight, tag = $edge24)
     |> xLine(length = -0.06 * railHeight)
@@ -73,9 +73,9 @@ fn rail8020(originStart, railHeight, railLength) {
     |> yLine(length = -0.06 * railHeight, tag = $edge25)
     |> xLine(length = 0.087 * railHeight, tag = $edge26)
     |> yLine(length = 0.183 * railHeight, tag = $edge27)
-    |> angledLine(angle = 135deg, endAbsoluteX = (1 - 0.356) / 2 * railHeight + originStart[0], tag = $edge28)
+    |> angledLine(angle = 135, endAbsoluteX = (1 - 0.356) / 2 * railHeight + originStart[0], tag = $edge28)
     |> yLine(length = -0.232 * railHeight, tag = $edge29)
-    |> angledLine(angle = 45deg, endAbsoluteX = 0.087 * railHeight + originStart[0], tag = $edge30)
+    |> angledLine(angle = 45, endAbsoluteX = 0.087 * railHeight + originStart[0], tag = $edge30)
     |> yLine(length = 0.183 * railHeight, tag = $edge31)
     |> xLine(length = -0.087 * railHeight, tag = $edge32)
     |> yLine(length = -0.06 * railHeight)

public/kcl-samples/axial-fan/fan-housing.kcl

@@ -11,8 +11,8 @@ import * from "parameters.kcl"
 // Bottom mounting face
 bottomFaceSketch = startSketchOn(XY)
   |> startProfile(at = [-fanSize / 2, -fanSize / 2])
-  |> angledLine(angle = 0deg, length = fanSize, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) + 90deg, length = fanSize, tag = $rectangleSegmentB001)
+  |> angledLine(angle = 0, length = fanSize, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = fanSize, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $rectangleSegmentD001)
   |> close()
@@ -50,12 +50,12 @@ bottomFaceSketch = startSketchOn(XY)
 // Add large openings to the bottom face to allow airflow through the fan
 airflowPattern = startSketchOn(bottomFaceSketch, face = END)
   |> startProfile(at = [fanSize * 7 / 25, -fanSize * 9 / 25])
-  |> angledLine(angle = 140deg, length = fanSize * 12 / 25, tag = $seg01)
-  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90deg)
-  |> angledLine(angle = -130deg, length = fanSize * 8 / 25)
-  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90deg)
-  |> angledLine(angle = segAng(seg01) + 180deg, length = fanSize * 2 / 25)
-  |> tangentialArc(radius = fanSize * 8 / 25, angle = 40deg)
+  |> angledLine(angle = 140, length = fanSize * 12 / 25, tag = $seg01)
+  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90)
+  |> angledLine(angle = -130, length = fanSize * 8 / 25)
+  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90)
+  |> angledLine(angle = segAng(seg01) + 180, length = fanSize * 2 / 25)
+  |> tangentialArc(radius = fanSize * 8 / 25, angle = 40)
   |> xLine(length = fanSize * 3 / 25)
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -75,13 +75,13 @@ bodyMiddle = startSketchOn(bottomFaceSketch, face = END)
        housingMiddleLength / 2,
        -housingMiddleLength / 2 - housingMiddleRadius
      ])
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
   |> yLine(length = housingMiddleLength)
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
   |> xLine(length = -housingMiddleLength)
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
   |> yLine(length = -housingMiddleLength)
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> extrude(length = fanHeight - 4 - 4)
 
@@ -93,8 +93,8 @@ bodyFanHole = startSketchOn(bodyMiddle, face = END)
 // Top mounting face. Cut a hole in the face to accommodate the fan
 topFaceSketch = startSketchOn(bodyMiddle, face = END)
 topHoles = startProfile(topFaceSketch, at = [-fanSize / 2, -fanSize / 2])
-  |> angledLine(angle = 0deg, length = fanSize, tag = $rectangleSegmentA002)
-  |> angledLine(angle = segAng(rectangleSegmentA002) + 90deg, length = fanSize, tag = $rectangleSegmentB002)
+  |> angledLine(angle = 0, length = fanSize, tag = $rectangleSegmentA002)
+  |> angledLine(angle = segAng(rectangleSegmentA002) + 90, length = fanSize, tag = $rectangleSegmentB002)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002), tag = $rectangleSegmentC002)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $rectangleSegmentD002)
   |> close()

public/kcl-samples/axial-fan/fan.kcl

@@ -11,11 +11,11 @@ import * from "parameters.kcl"
 fanCenter = startSketchOn(XZ)
   |> startProfile(at = [-0.0001, fanHeight])
   |> xLine(endAbsolute = -15 + 1.5)
-  |> tangentialArc(radius = 1.5, angle = 90deg)
+  |> tangentialArc(radius = 1.5, angle = 90)
   |> yLine(endAbsolute = 4.5)
   |> xLine(endAbsolute = -13)
   |> yLine(endAbsolute = profileStartY(%) - 5)
-  |> tangentialArc(radius = 1, angle = -90deg)
+  |> tangentialArc(radius = 1, angle = -90)
   |> xLine(endAbsolute = -1)
   |> yLine(length = 2)
   |> xLine(length = -0.15)
@@ -39,32 +39,32 @@ fn fanBlade(offsetHeight, startAngle: number(deg)) {
          15 * cos(startAngle),
          15 * sin(startAngle)
        ])
-    |> arc(angleStart = startAngle, angleEnd = startAngle + 1deg, radius = 15)
+    |> arc(angleStart = startAngle, angleEnd = startAngle + 14, radius = 15)
     |> arc(
          endAbsolute = [
-           fanSize * 22 / 50 * cos(startAngle - 20deg),
-           fanSize * 22 / 50 * sin(startAngle - 20deg)
+           fanSize * 22 / 50 * cos(startAngle - 20),
+           fanSize * 22 / 50 * sin(startAngle - 20)
          ],
          interiorAbsolute = [
-           fanSize * 11 / 50 * cos(startAngle + 3deg),
-           fanSize * 11 / 50 * sin(startAngle + 3deg)
+           fanSize * 11 / 50 * cos(startAngle + 3),
+           fanSize * 11 / 50 * sin(startAngle + 3)
          ],
        )
     |> arc(
          endAbsolute = [
-           fanSize * 22 / 50 * cos(startAngle - 24deg),
-           fanSize * 22 / 50 * sin(startAngle - 24deg)
+           fanSize * 22 / 50 * cos(startAngle - 24),
+           fanSize * 22 / 50 * sin(startAngle - 24)
          ],
          interiorAbsolute = [
-           fanSize * 22 / 50 * cos(startAngle - 22deg),
-           fanSize * 22 / 50 * sin(startAngle - 22deg)
+           fanSize * 22 / 50 * cos(startAngle - 22),
+           fanSize * 22 / 50 * sin(startAngle - 22)
          ],
        )
     |> arc(
          endAbsolute = [profileStartX(%), profileStartY(%)],
          interiorAbsolute = [
-           fanSize * 11 / 50 * cos(startAngle - 5deg),
-           fanSize * 11 / 50 * sin(startAngle - 5deg)
+           fanSize * 11 / 50 * cos(startAngle - 5),
+           fanSize * 11 / 50 * sin(startAngle - 5)
          ],
        )
     |> close()
@@ -73,9 +73,9 @@ fn fanBlade(offsetHeight, startAngle: number(deg)) {
 
 // Loft the fan blade cross sections into a single blade, then pattern them about the fan center
 crossSections = [
-  fanBlade(offsetHeight = 4.5, startAngle = 50deg),
-  fanBlade(offsetHeight = (fanHeight - 2 - 4) / 2, startAngle = 30deg),
-  fanBlade(offsetHeight = fanHeight - 2, startAngle = 0deg)
+  fanBlade(offsetHeight = 4.5, startAngle = 50),
+  fanBlade(offsetHeight = (fanHeight - 2 - 4) / 2, startAngle = 30),
+  fanBlade(offsetHeight = fanHeight - 2, startAngle = 0)
 ]
 loft(crossSections)
   |> appearance(color = "#f3e2d8")
@@ -83,6 +83,6 @@ loft(crossSections)
        instances = 9,
        axis = [0, 0, 1],
        center = [0, 0, 0],
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        rotateDuplicates = true,
      )

public/kcl-samples/ball-bearing/main.kcl

@@ -27,13 +27,13 @@ insideWall = extrude(insideWallSketch, length = overallThickness)
 // Create the sketch of one of the balls
 ballsSketch = startSketchOn(XY)
   |> startProfile(at = [shaftDia / 2 + wallThickness, 0.001])
-  |> arc(angleStart = 180deg, angleEnd = 0deg, radius = sphereDia / 2)
+  |> arc(angleStart = 180, angleEnd = 0, radius = sphereDia / 2)
   |> close()
 
 // Revolve the ball to make a sphere and pattern around the inside wall
 balls = revolve(ballsSketch, axis = X)
   |> patternCircular3d(
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        axis = [0, 0, 1],
        center = [0, 0, 0],
        instances = nBalls,
@@ -44,9 +44,9 @@ balls = revolve(ballsSketch, axis = X)
 chainSketch = startSketchOn(XY)
   |> startProfile(at = [
        shaftDia / 2 + wallThickness + sphereDia / 2 - (chainWidth / 2),
-       0.125 * sin(60deg)
+       0.125 * sin(60)
      ])
-  |> arc(angleStart = 120deg, angleEnd = 60deg, radius = sphereDia / 2)
+  |> arc(angleStart = 120, angleEnd = 60, radius = sphereDia / 2)
   |> line(end = [0, chainThickness])
   |> line(end = [-chainWidth, 0])
   |> close()
@@ -54,7 +54,7 @@ chainSketch = startSketchOn(XY)
 // Revolve the chain sketch
 chainHead = revolve(chainSketch, axis = X)
   |> patternCircular3d(
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        axis = [0, 0, 1],
        center = [0, 0, 0],
        instances = nBalls,
@@ -72,9 +72,9 @@ linkSketch = startSketchOn(XZ)
      )
 
 // Revolve the link sketch
-linkRevolve = revolve(linkSketch, axis = Y, angle = 360deg / nBalls)
+linkRevolve = revolve(linkSketch, axis = Y, angle = 360 / nBalls)
   |> patternCircular3d(
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        axis = [0, 0, 1],
        center = [0, 0, 0],
        instances = nBalls,

public/kcl-samples/bench/bench-parts.kcl

@@ -57,9 +57,9 @@ fn connectorSketch(@plane, start) {
 
 export fn connector(@plane, length) {
   connectorSketch(plane, start = [-12, 8])
-    |> extrude(length)
+    |> extrude(length = length)
   connectorSketch(plane, start = [16, 8])
-    |> extrude(length)
+    |> extrude(length = length)
   return 0
 }
 
@@ -79,18 +79,18 @@ fn seatSlatSketch(@plane) {
 
 export fn seatSlats(@plane, length) {
   seatSlatSketch(plane)
-    |> extrude(length)
+    |> extrude(length = length)
   return 0
 }
 
 fn backSlatsSketch(@plane) {
   sketch004 = startSketchOn(plane)
     |> startProfile(at = [22, 38.5])
-    |> angledLine(angle = 173deg, length = 2)
+    |> angledLine(angle = 173, length = 2)
     |> line(end = [-1.74, 2.03])
-    |> angledLine(angle = 82deg, length = 6.6)
+    |> angledLine(angle = 82, length = 6.6)
     |> line(end = [2.23, 1.42])
-    |> angledLine(angle = -7deg, length = 2)
+    |> angledLine(angle = -7, length = 2)
     |> line(endAbsolute = profileStart(%))
     |> close()
     |> patternLinear2d(instances = 2, distance = 11, axis = [-0.137, -1])
@@ -99,7 +99,7 @@ fn backSlatsSketch(@plane) {
 
 export fn backSlats(@plane, length) {
   b = backSlatsSketch(plane)
-    |> extrude(length)
+    |> extrude(length = length)
   return b
 }
 
@@ -107,7 +107,7 @@ fn armRestPath(@plane) {
   sketch005 = startSketchOn(plane)
     |> startProfile(at = [20, 33])
     |> xLine(length = -20)
-    |> arc(angleStart = 90deg, angleEnd = 180deg, radius = 10)
+    |> arc(angleStart = 90, angleEnd = 180, radius = 10)
   return sketch005
 }
 

public/kcl-samples/bone-plate/main.kcl

@@ -10,13 +10,13 @@ boltSize = 4.5
 // Revolve the profile of a compression plate designed to fit a bone
 plateRevolve = startSketchOn(YZ)
   |> startProfile(at = [22.9, 0])
-  |> arc(angleStart = 180deg, angleEnd = 176deg, radius = 120)
-  |> arc(angleStart = -60deg, angleEnd = 54deg, radius = 5)
-  |> arc(angleStart = 180deg, angleEnd = 176deg, radius = 120)
-  |> arc(angleStart = -60deg, angleEnd = 54deg, radius = 5)
-  |> arc(angleStart = 180deg, angleEnd = 176deg, radius = 120)
-  |> arc(angleStart = -60deg, angleEnd = 54deg, radius = 5)
-  |> arc(angleStart = 180deg, angleEnd = 174deg, radius = 170)
+  |> arc(angleStart = 180, angleEnd = 176, radius = 120)
+  |> arc(angleStart = -60, angleEnd = 54, radius = 5)
+  |> arc(angleStart = 180, angleEnd = 176, radius = 120)
+  |> arc(angleStart = -60, angleEnd = 54, radius = 5)
+  |> arc(angleStart = 180, angleEnd = 176, radius = 120)
+  |> arc(angleStart = -60, angleEnd = 54, radius = 5)
+  |> arc(angleStart = 180, angleEnd = 174, radius = 170)
   |> tangentialArc(endAbsolute = [41.8, 91.88])
   |> tangentialArc(endAbsolute = [56.92, 117.08], tag = $seg01)
   |> angledLine(angle = tangentToEnd(seg01), length = 23.16)
@@ -27,7 +27,7 @@ plateRevolve = startSketchOn(YZ)
   |> angledLine(angle = tangentToEnd(seg03), length = 49.06)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> revolve(axis = Y, angle = 65deg, symmetric = true)
+  |> revolve(axis = Y, angle = 65, symmetric = true)
 
 // Create a hole sketch with the size and location of each bolt hole
 holeSketch = startSketchOn(XZ)

public/kcl-samples/car-wheel-assembly/brake-caliper.kcl

@@ -17,44 +17,44 @@ brakeCaliperSketch = startSketchOn(XY)
        0,
        rotorTotalThickness + caliperTolerance - caliperInnerEdgeRadius
      ])
-  |> tangentialArc(angle = 90deg, radius = caliperInnerEdgeRadius)
+  |> tangentialArc(angle = 90, radius = caliperInnerEdgeRadius)
   |> line(end = [
        -caliperPadLength + 2 * caliperInnerEdgeRadius,
        0
      ])
-  |> tangentialArc(angle = -90deg, radius = caliperInnerEdgeRadius)
+  |> tangentialArc(angle = -90, radius = caliperInnerEdgeRadius)
   |> line(end = [
        0,
        caliperThickness - (caliperInnerEdgeRadius * 2)
      ])
-  |> tangentialArc(angle = -90deg, radius = caliperInnerEdgeRadius)
+  |> tangentialArc(angle = -90, radius = caliperInnerEdgeRadius)
   |> line(end = [
        caliperPadLength + caliperThickness - caliperOuterEdgeRadius - caliperInnerEdgeRadius,
        0
      ])
-  |> tangentialArc(angle = -90deg, radius = caliperOuterEdgeRadius)
+  |> tangentialArc(angle = -90, radius = caliperOuterEdgeRadius)
   |> line(end = [
        0,
        -2 * caliperTolerance - (2 * caliperThickness) - rotorTotalThickness + 2 * caliperOuterEdgeRadius
      ])
-  |> tangentialArc(angle = -90deg, radius = caliperOuterEdgeRadius)
+  |> tangentialArc(angle = -90, radius = caliperOuterEdgeRadius)
   |> line(end = [
        -caliperPadLength - caliperThickness + caliperOuterEdgeRadius + caliperInnerEdgeRadius,
        0
      ])
-  |> tangentialArc(angle = -90deg, radius = caliperInnerEdgeRadius)
+  |> tangentialArc(angle = -90, radius = caliperInnerEdgeRadius)
   |> line(end = [
        0,
        caliperThickness - (2 * caliperInnerEdgeRadius)
      ])
-  |> tangentialArc(angle = -90deg, radius = caliperInnerEdgeRadius)
+  |> tangentialArc(angle = -90, radius = caliperInnerEdgeRadius)
   |> line(end = [
        caliperPadLength - (2 * caliperInnerEdgeRadius),
        0
      ])
-  |> tangentialArc(angle = 90deg, radius = caliperInnerEdgeRadius)
+  |> tangentialArc(angle = 90, radius = caliperInnerEdgeRadius)
   |> close()
 
 // Revolve the brake caliper sketch
-revolve(brakeCaliperSketch, axis = Y, angle = -70deg)
+revolve(brakeCaliperSketch, axis = Y, angle = -70)
   |> appearance(color = "#c82d2d", metalness = 90, roughness = 90)

public/kcl-samples/car-wheel-assembly/car-tire.kcl

@@ -17,7 +17,7 @@ tireSketch = startSketchOn(XY)
        ],
        tag = $edge1,
      )
-  |> tangentialArc(angle = -90deg, radius = bendRadius)
+  |> tangentialArc(angle = -90, radius = bendRadius)
   |> line(endAbsolute = [
        tireOuterDiameter / 2,
        tireDepth / 2 - tireTreadOffset
@@ -36,7 +36,7 @@ tireSketch = startSketchOn(XY)
        tireOuterDiameter / 2,
        -tireDepth / 2 + bendRadius
      ])
-  |> tangentialArc(angle = -90deg, radius = bendRadius)
+  |> tangentialArc(angle = -90, radius = bendRadius)
   |> line(endAbsolute = [tireInnerDiameter / 2, -tireDepth / 2], tag = $edge2)
   |> close()
 

public/kcl-samples/car-wheel-assembly/lug-nut.kcl

@@ -17,10 +17,10 @@ customPlane = {
 fn lug(plane, length, diameter) {
   lugSketch = startSketchOn(customPlane)
     |> startProfile(at = [0 + diameter / 2, 0])
-    |> angledLine(angle = 70deg, lengthY = lugHeadLength)
+    |> angledLine(angle = 70, lengthY = lugHeadLength)
     |> xLine(endAbsolute = lugDiameter / 2)
     |> yLine(endAbsolute = lugLength)
-    |> tangentialArc(angle = 90deg, radius = 3mm)
+    |> tangentialArc(angle = 90, radius = 3mm)
     |> xLine(endAbsolute = 0 + .001, tag = $c1)
     |> yLine(endAbsolute = lugThreadDepth)
     |> xLine(endAbsolute = lugThreadDiameter)

public/kcl-samples/car-wheel-assembly/main.kcl

@@ -24,7 +24,7 @@ carWheel
 // Place the lug nuts
 lugNut
   |> patternCircular3d(
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        axis = [0, 1, 0],
        center = [0, 0, 0],
        instances = lugCount,

public/kcl-samples/car-wheel-assembly/parameters.kcl

@@ -12,7 +12,7 @@ export wheelWidth = 9.5
 export wheelDiameter = 19
 export spokeCount = 6
 export spokeGap = 0.2
-export spokeAngle = 0.02deg
+export spokeAngle = 0.02
 export spokeThickness = 0.95
 
 // Lug Nut

public/kcl-samples/cold-plate/main.kcl

@@ -14,15 +14,15 @@ coldPlate = startSketchOn(YZ)
   |> startProfile(at = [0, tubeDiameter * 2])
   |> xLine(length = bendRadius - (tubeDiameter / 2))
   |> yLine(length = -tubeDiameter)
-  |> tangentialArc(angle = 180deg, radius = tubeDiameter / 2)
+  |> tangentialArc(angle = 180, radius = tubeDiameter / 2)
   |> yLine(length = tubeDiameter)
   |> xLine(length = bendRadius * 2 - tubeDiameter, tag = $seg07)
   |> yLine(length = -tubeDiameter, tag = $seg09)
-  |> tangentialArc(angle = 180deg, radius = tubeDiameter / 2)
+  |> tangentialArc(angle = 180, radius = tubeDiameter / 2)
   |> yLine(length = tubeDiameter, tag = $seg08)
   |> xLine(length = bendRadius - (tubeDiameter / 2))
-  |> angledLine(angle = -77deg, length = tubeDiameter / 3)
-  |> tangentialArc(angle = 77deg, radius = tubeDiameter, tag = $seg01)
+  |> angledLine(angle = -77, length = tubeDiameter / 3)
+  |> tangentialArc(angle = 77, radius = tubeDiameter, tag = $seg01)
   |> angledLine(angle = tangentToEnd(seg01), length = 1)
   |> yLine(endAbsolute = 0)
   |> xLine(endAbsolute = 0)
@@ -34,11 +34,11 @@ coldPlate = startSketchOn(YZ)
 copperTubePath = startSketchOn(offsetPlane(XY, offset = tubeDiameter))
   |> startProfile(at = [-7.35, -bendRadius * 3])
   |> xLine(length = 14.13, tag = $seg05)
-  |> tangentialArc(angle = 180deg, radius = bendRadius, tag = $seg02)
+  |> tangentialArc(angle = 180, radius = bendRadius, tag = $seg02)
   |> angledLine(angle = tangentToEnd(seg02), length = 13.02, tag = $seg06)
-  |> tangentialArc(angle = -180deg, radius = bendRadius, tag = $seg03)
+  |> tangentialArc(angle = -180, radius = bendRadius, tag = $seg03)
   |> angledLine(angle = tangentToEnd(seg03), length = segLen(seg06))
-  |> tangentialArc(angle = 180deg, radius = bendRadius, tag = $seg04)
+  |> tangentialArc(angle = 180, radius = bendRadius, tag = $seg04)
   |> angledLine(angle = tangentToEnd(seg04), length = segLen(seg05))
 
 // Create the profile for the inner and outer diameter of the hollow copper tube

public/kcl-samples/color-cube/main.kcl

@@ -23,8 +23,8 @@ tealPlane = offsetPlane(YZ, offset = -halfSize)
 fn sketchRectangle(profile, color) {
   return profile
     |> startProfile(at = [-halfSize, halfSize])
-    |> angledLine(angle = 0deg, length = size, tag = $rectangleSegmentA001)
-    |> angledLine(angle = segAng(rectangleSegmentA001) - 90deg, length = size, tag = $rectangleSegmentB001)
+    |> angledLine(angle = 0, length = size, tag = $rectangleSegmentA001)
+    |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = size, tag = $rectangleSegmentB001)
     |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()

public/kcl-samples/counterdrilled-weldment/main.kcl

@@ -22,8 +22,8 @@ blockWidth = boltSpacingY + boltDiameter * 6
 // Draw the base plate
 plateSketch = startSketchOn(XY)
   |> startProfile(at = [-blockLength / 2, -blockWidth / 2])
-  |> angledLine(angle = 0deg, length = blockLength, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) + 90deg, length = blockWidth, tag = $rectangleSegmentB001)
+  |> angledLine(angle = 0, length = blockLength, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = blockWidth, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $rectangleSegmentD001)
   |> close()

public/kcl-samples/countersunk-plate/main.kcl

@@ -22,13 +22,13 @@ tangentLength = (r1 - r2) / tan(tangentAngle)
 
 plateBody = startSketchOn(XY)
   // Use polar coordinates to start the sketch at the tangent point of the larger radius
-  |> startProfile(at = polar(angle = 90deg - tangentAngle, length = r1))
+  |> startProfile(at = polar(angle = 90 - tangentAngle, length = r1))
   |> angledLine(angle = -tangentAngle, length = tangentLength)
-  |> tangentialArc(radius = r2, angle = (tangentAngle - 90deg) * 2)
+  |> tangentialArc(radius = r2, angle = (tangentAngle - 90) * 2)
   |> angledLine(angle = tangentAngle, length = -tangentLength)
   |> tangentialArc(radius = r1, angle = -tangentAngle * 2)
   |> angledLine(angle = -tangentAngle, length = -tangentLength)
-  |> tangentialArc(radius = r2, angle = (tangentAngle - 90deg) * 2)
+  |> tangentialArc(radius = r2, angle = (tangentAngle - 90) * 2)
   |> angledLine(angle = tangentAngle, length = tangentLength)
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()

public/kcl-samples/cpu-cooler/fan-housing.kcl

@@ -11,8 +11,8 @@ import * from "parameters.kcl"
 // Bottom mounting face
 bottomFaceSketch = startSketchOn(YZ)
   |> startProfile(at = [-fanSize / 2, -fanSize / 2])
-  |> angledLine(angle = 0deg, length = fanSize, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) + 90deg, length = fanSize, tag = $rectangleSegmentB001)
+  |> angledLine(angle = 0, length = fanSize, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = fanSize, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $rectangleSegmentD001)
   |> close()
@@ -50,12 +50,12 @@ bottomFaceSketch = startSketchOn(YZ)
 // Add large openings to the bottom face to allow airflow through the fan
 airflowPattern = startSketchOn(bottomFaceSketch, face = END)
   |> startProfile(at = [fanSize * 7 / 25, -fanSize * 9 / 25])
-  |> angledLine(angle = 140deg, length = fanSize * 12 / 25, tag = $seg01)
-  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90deg)
-  |> angledLine(angle = -130deg, length = fanSize * 8 / 25)
-  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90deg)
-  |> angledLine(angle = segAng(seg01) + 180deg, length = fanSize * 2 / 25)
-  |> tangentialArc(radius = fanSize * 8 / 25, angle = 40deg)
+  |> angledLine(angle = 140, length = fanSize * 12 / 25, tag = $seg01)
+  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90)
+  |> angledLine(angle = -130, length = fanSize * 8 / 25)
+  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90)
+  |> angledLine(angle = segAng(seg01) + 180, length = fanSize * 2 / 25)
+  |> tangentialArc(radius = fanSize * 8 / 25, angle = 40)
   |> xLine(length = fanSize * 3 / 25)
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -75,13 +75,13 @@ bodyMiddle = startSketchOn(bottomFaceSketch, face = END)
        housingMiddleLength / 2,
        -housingMiddleLength / 2 - housingMiddleRadius
      ])
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
   |> yLine(length = housingMiddleLength)
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
   |> xLine(length = -housingMiddleLength)
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
   |> yLine(length = -housingMiddleLength)
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> extrude(length = fanHeight - 4 - 4)
 
@@ -93,8 +93,8 @@ bodyFanHole = startSketchOn(bodyMiddle, face = END)
 // Top mounting face. Cut a hole in the face to accommodate the fan
 topFaceSketch = startSketchOn(bodyMiddle, face = END)
 topHoles = startProfile(topFaceSketch, at = [-fanSize / 2, -fanSize / 2])
-  |> angledLine(angle = 0deg, length = fanSize, tag = $rectangleSegmentA002)
-  |> angledLine(angle = segAng(rectangleSegmentA002) + 90deg, length = fanSize, tag = $rectangleSegmentB002)
+  |> angledLine(angle = 0, length = fanSize, tag = $rectangleSegmentA002)
+  |> angledLine(angle = segAng(rectangleSegmentA002) + 90, length = fanSize, tag = $rectangleSegmentB002)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002), tag = $rectangleSegmentC002)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $rectangleSegmentD002)
   |> close()

public/kcl-samples/cpu-cooler/fan.kcl

@@ -20,32 +20,32 @@ fn fanBlade(offsetHeight, startAngle) {
          15 * cos(startAngle),
          15 * sin(startAngle)
        ])
-    |> arc(angleStart = startAngle, angleEnd = startAngle + 14deg, radius = 15)
+    |> arc(angleStart = startAngle, angleEnd = startAngle + 14, radius = 15)
     |> arc(
          endAbsolute = [
-           fanSize * 22 / 50 * cos(startAngle - 20deg),
-           fanSize * 22 / 50 * sin(startAngle - 20deg)
+           fanSize * 22 / 50 * cos(startAngle - 20),
+           fanSize * 22 / 50 * sin(startAngle - 20)
          ],
          interiorAbsolute = [
-           fanSize * 11 / 50 * cos(startAngle + 3deg),
-           fanSize * 11 / 50 * sin(startAngle + 3deg)
+           fanSize * 11 / 50 * cos(startAngle + 3),
+           fanSize * 11 / 50 * sin(startAngle + 3)
          ],
        )
     |> arc(
          endAbsolute = [
-           fanSize * 22 / 50 * cos(startAngle - 24deg),
-           fanSize * 22 / 50 * sin(startAngle - 24deg)
+           fanSize * 22 / 50 * cos(startAngle - 24),
+           fanSize * 22 / 50 * sin(startAngle - 24)
          ],
          interiorAbsolute = [
-           fanSize * 22 / 50 * cos(startAngle - 22deg),
-           fanSize * 22 / 50 * sin(startAngle - 22deg)
+           fanSize * 22 / 50 * cos(startAngle - 22),
+           fanSize * 22 / 50 * sin(startAngle - 22)
          ],
        )
     |> arc(
          endAbsolute = [profileStartX(%), profileStartY(%)],
          interiorAbsolute = [
-           fanSize * 11 / 50 * cos(startAngle - 5deg),
-           fanSize * 11 / 50 * sin(startAngle - 5deg)
+           fanSize * 11 / 50 * cos(startAngle - 5),
+           fanSize * 11 / 50 * sin(startAngle - 5)
          ],
        )
     |> close()
@@ -54,16 +54,16 @@ fn fanBlade(offsetHeight, startAngle) {
 
 // Loft the fan blade cross sections into a single blade, then pattern them about the fan center
 crossSections = [
-  fanBlade(offsetHeight = 4.5, startAngle = 50deg),
-  fanBlade(offsetHeight = (fanHeight - 2 - 4) / 2, startAngle = 30deg),
-  fanBlade(offsetHeight = fanHeight - 2, startAngle = 0deg)
+  fanBlade(offsetHeight = 4.5, startAngle = 50),
+  fanBlade(offsetHeight = (fanHeight - 2 - 4) / 2, startAngle = 30),
+  fanBlade(offsetHeight = fanHeight - 2, startAngle = 0)
 ]
 bladeLoft = loft(crossSections)
   |> patternCircular3d(
        instances = 9,
        axis = [1, 0, 0],
        center = [0, 0, 0],
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        rotateDuplicates = true,
      )
 

public/kcl-samples/cpu-cooler/heat-sink.kcl

@@ -11,10 +11,10 @@ import * from "parameters.kcl"
 endTubePath = startSketchOn(offsetPlane(YZ, offset = -20))
   |> startProfile(at = [fanSize / 4, fanSize + 38])
   |> yLine(endAbsolute = bendRadius + 10, tag = $seg01)
-  |> tangentialArc(radius = bendRadius, angle = -90deg)
+  |> tangentialArc(radius = bendRadius, angle = -90)
   |> xLine(endAbsolute = 0, tag = $seg02)
   |> xLine(length = -segLen(seg02))
-  |> tangentialArc(radius = bendRadius, angle = -90deg)
+  |> tangentialArc(radius = bendRadius, angle = -90)
   |> yLine(length = segLen(seg01))
 
 // Sweep and translate the outermost tube on each end
@@ -27,7 +27,7 @@ endTube = startSketchOn(offsetPlane(XY, offset = fanSize + 38))
        instances = 2,
        axis = [0, 0, 1],
        center = [0, 0, 0],
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        rotateDuplicates = false,
      )
 
@@ -35,13 +35,13 @@ endTube = startSketchOn(offsetPlane(XY, offset = fanSize + 38))
 centerTubePath = startSketchOn(offsetPlane(YZ, offset = -4))
   |> startProfile(at = [fanSize / 2.67, fanSize + 38])
   |> yLine(endAbsolute = bendRadius + 15 + 10)
-  |> tangentialArc(radius = bendRadius, angle = -45deg)
-  |> angledLine(angle = -135deg, lengthY = 15)
-  |> tangentialArc(radius = bendRadius, angle = -45deg)
+  |> tangentialArc(radius = bendRadius, angle = -45)
+  |> angledLine(angle = -135, lengthY = 15)
+  |> tangentialArc(radius = bendRadius, angle = -45)
   |> xLine(endAbsolute = 0, tag = $seg03)
   |> xLine(length = -segLen(seg03))
-  |> tangentialArc(radius = bendRadius, angle = -155deg)
-  |> tangentialArc(radius = bendRadius, angle = 65deg)
+  |> tangentialArc(radius = bendRadius, angle = -155)
+  |> tangentialArc(radius = bendRadius, angle = 65)
   |> yLine(endAbsolute = fanSize + 38)
 
 // Draw the profile and sweep the 4 interior tubes
@@ -68,13 +68,13 @@ centerTube = startSketchOn(offsetPlane(XY, offset = fanSize + 38))
 heatFins = startSketchOn(offsetPlane(XY, offset = 45))
   |> startProfile(at = [0, -fanSize / 2])
   |> xLine(length = 9)
-  |> angledLine(angle = -60deg, length = 2.5, tag = $seg04)
+  |> angledLine(angle = -60, length = 2.5, tag = $seg04)
   |> xLine(length = 0.75)
   |> arc(interiorAbsolute = [lastSegX(%) + 1, lastSegY(%) + 1.2], endAbsolute = [lastSegX(%) + 2, lastSegY(%)])
   |> xLine(length = 0.75)
-  |> angledLine(angle = 60deg, length = segLen(seg04))
+  |> angledLine(angle = 60, length = segLen(seg04))
   |> xLine(endAbsolute = heatSinkDepth / 2 - 3)
-  |> tangentialArc(angle = 90deg, radius = 3)
+  |> tangentialArc(angle = 90, radius = 3)
   |> yLine(endAbsolute = 0)
   |> mirror2d(axis = X)
   |> mirror2d(axis = Y)
@@ -91,11 +91,11 @@ heatFins = startSketchOn(offsetPlane(XY, offset = 45))
 coolerBase = startSketchOn(-XZ)
 baseLower = startProfile(coolerBase, at = [0, 10])
   |> xLine(length = -0.9)
-  |> arc(angleStart = 0deg, angleEnd = -180deg, radius = 3.1)
+  |> arc(angleStart = 0, angleEnd = -180, radius = 3.1)
   |> xLine(length = -1.8)
-  |> arc(angleStart = 0deg, angleEnd = -180deg, radius = 3)
+  |> arc(angleStart = 0, angleEnd = -180, radius = 3)
   |> xLine(length = -1.8)
-  |> arc(angleStart = 0deg, angleEnd = -180deg, radius = 3)
+  |> arc(angleStart = 0, angleEnd = -180, radius = 3)
   |> xLine(length = -1.8)
   |> xLine(length = -2)
   |> yLine(length = -10)
@@ -105,15 +105,15 @@ baseLower = startProfile(coolerBase, at = [0, 10])
 
 baseUpper = startProfile(coolerBase, at = [0, 10])
   |> xLine(length = -0.9)
-  |> arc(angleStart = 0deg, angleEnd = 180deg, radius = 3.1)
+  |> arc(angleStart = 0, angleEnd = 180, radius = 3.1)
   |> xLine(length = -1.8)
-  |> arc(angleStart = 0deg, angleEnd = 180deg, radius = 3)
+  |> arc(angleStart = 0, angleEnd = 180, radius = 3)
   |> xLine(length = -1.8)
-  |> arc(angleStart = 0deg, angleEnd = 180deg, radius = 3)
+  |> arc(angleStart = 0, angleEnd = 180, radius = 3)
   |> xLine(length = -1.8)
   |> xLine(length = -1)
   |> yLine(length = 4)
-  |> tangentialArc(angle = -90deg, radius = 2)
+  |> tangentialArc(angle = -90, radius = 2)
   |> xLine(endAbsolute = 0)
   |> mirror2d(axis = Y)
   |> extrude(length = 2 * segLen(seg02) * 3 / 4, symmetric = true)
@@ -122,15 +122,15 @@ baseUpper = startProfile(coolerBase, at = [0, 10])
 mountingBracket = startSketchOn(XZ)
   |> startProfile(at = [-10, 16])
   |> xLine(length = -20)
-  |> tangentialArc(angle = 20deg, radius = bendRadius)
-  |> angledLine(angle = -160deg, length = 14, tag = $seg09)
-  |> tangentialArc(angle = -30deg, radius = bendRadius + sheetThickness)
-  |> angledLine(angle = 170deg, length = 21.5, tag = $seg04Q)
-  |> angledLine(angle = 170deg - 90deg, length = sheetThickness, tag = $seg08)
-  |> angledLine(angle = segAng(seg04Q) + 180deg, length = segLen(seg04Q), tag = $seg05E)
-  |> tangentialArc(angle = 30deg, radius = bendRadius)
-  |> angledLine(angle = segAng(seg09) + 180deg, length = segLen(seg09))
-  |> tangentialArc(angle = -20deg, radius = bendRadius + sheetThickness)
+  |> tangentialArc(angle = 20, radius = bendRadius)
+  |> angledLine(angle = -160, length = 14, tag = $seg09)
+  |> tangentialArc(angle = -30, radius = bendRadius + sheetThickness)
+  |> angledLine(angle = 170, length = 21.5, tag = $seg04Q)
+  |> angledLine(angle = 170 - 90, length = sheetThickness, tag = $seg08)
+  |> angledLine(angle = segAng(seg04Q) + 180, length = segLen(seg04Q), tag = $seg05E)
+  |> tangentialArc(angle = 30, radius = bendRadius)
+  |> angledLine(angle = segAng(seg09) + 180, length = segLen(seg09))
+  |> tangentialArc(angle = -20, radius = bendRadius + sheetThickness)
   |> xLine(endAbsolute = profileStartX(%))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg07)
   |> close()
@@ -166,6 +166,6 @@ thruHole = startSketchOn(mountingBracket, face = seg05E)
        instances = 2,
        axis = [0, 0, 1],
        center = [0, 0, 0],
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        rotateDuplicates = true,
      )

public/kcl-samples/cpu-cooler/main.kcl

@@ -37,7 +37,7 @@ mountingWire
        instances = 2,
        axis = [0, 1, 0],
        center = [0, 0, 40 + fanSize / 2],
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        rotateDuplicates = true,
      )
   |> patternCircular3d(
@@ -45,7 +45,7 @@ mountingWire
        instances = 2,
        axis = [0, 0, 1],
        center = [0, 0, 0],
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        rotateDuplicates = true,
      )
 removableSticker

public/kcl-samples/cpu-cooler/mounting-wire.kcl

@@ -11,29 +11,29 @@ import * from "parameters.kcl"
 upperArm = startSketchOn(offsetPlane(XZ, offset = fanSize / 2 + 2))
   |> startProfile(at = [-12, 40 + fanSize / 2])
   |> yLine(length = 7)
-  |> tangentialArc(radius = 2, angle = 90deg)
+  |> tangentialArc(radius = 2, angle = 90)
   |> xLine(length = -9)
-  |> tangentialArc(radius = 2, angle = -90deg)
+  |> tangentialArc(radius = 2, angle = -90)
   |> yLine(length = 14)
-  |> tangentialArc(radius = 2, angle = 90deg)
+  |> tangentialArc(radius = 2, angle = 90)
   |> xLine(length = -9)
-  |> tangentialArc(radius = 2, angle = -80deg)
-  |> angledLine(angle = 100deg, endAbsoluteY = 40 + fanSize / 2 + mountingHoleSpacing / 2 - 1.5)
-  |> tangentialArc(radius = 2, angle = 80deg, tag = $seg07)
+  |> tangentialArc(radius = 2, angle = -80)
+  |> angledLine(angle = 100, endAbsoluteY = 40 + fanSize / 2 + mountingHoleSpacing / 2 - 1.5)
+  |> tangentialArc(radius = 2, angle = 80, tag = $seg07)
 
 // Draw the XZ component of the mounting wire path
 lowerArm = startSketchOn(offsetPlane(XZ, offset = fanSize / 2 + 2))
   |> startProfile(at = [-12, 40 + fanSize / 2])
   |> yLine(length = -7)
-  |> tangentialArc(radius = 2, angle = -90deg)
+  |> tangentialArc(radius = 2, angle = -90)
   |> xLine(length = -9)
-  |> tangentialArc(radius = 2, angle = 90deg)
+  |> tangentialArc(radius = 2, angle = 90)
   |> yLine(length = -14)
-  |> tangentialArc(radius = 2, angle = -90deg)
+  |> tangentialArc(radius = 2, angle = -90)
   |> xLine(length = -9)
-  |> tangentialArc(radius = 2, angle = 80deg)
-  |> angledLine(angle = -100deg, endAbsoluteY = 40 + fanSize / 2 - (mountingHoleSpacing / 2) + 1.5)
-  |> tangentialArc(radius = 2, angle = -80deg, tag = $seg08)
+  |> tangentialArc(radius = 2, angle = 80)
+  |> angledLine(angle = -100, endAbsoluteY = 40 + fanSize / 2 - (mountingHoleSpacing / 2) + 1.5)
+  |> tangentialArc(radius = 2, angle = -80, tag = $seg08)
 
 // Create the profile of the mounting wire and sweep along the XZ path
 wireProfile = startSketchOn(offsetPlane(XY, offset = 40 + fanSize / 2))
@@ -47,18 +47,18 @@ sweepLowerArm = circle(wireProfile, center = [-12, -fanSize / 2 - 2], radius = 1
 upperHook = startSketchOn(offsetPlane(XY, offset = segEndY(seg07)))
   |> startProfile(at = [segEndX(seg07), -fanSize / 2 - 2])
   |> xLine(endAbsolute = -heatSinkDepth / 2 - fanHeight)
-  |> tangentialArc(radius = 2, angle = -90deg)
+  |> tangentialArc(radius = 2, angle = -90)
   |> yLine(endAbsolute = -mountingHoleSpacing / 2 - 2)
-  |> tangentialArc(radius = 2, angle = -90deg)
+  |> tangentialArc(radius = 2, angle = -90)
   |> xLine(length = fanHeight / 3)
 
 // Draw the XY components of the mounting wire path
 lowerHook = startSketchOn(offsetPlane(XY, offset = segEndY(seg08)))
   |> startProfile(at = [segEndX(seg07), -fanSize / 2 - 2])
   |> xLine(endAbsolute = -heatSinkDepth / 2 - fanHeight)
-  |> tangentialArc(radius = 2, angle = -90deg)
+  |> tangentialArc(radius = 2, angle = -90)
   |> yLine(endAbsolute = -mountingHoleSpacing / 2 - 2)
-  |> tangentialArc(radius = 2, angle = -90deg)
+  |> tangentialArc(radius = 2, angle = -90)
   |> xLine(length = fanHeight / 3)
 
 // Sweep the wire profile around the hook-shaped segments of the mounting wire

public/kcl-samples/cpu-cooler/removable-sticker.kcl

@@ -7,8 +7,8 @@
 // Create a simple body to represent the removable warning sticker. Brightly color the sticker so that the user will not forget to remove it before installing the device
 removableSticker = startSketchOn(-XY)
   |> startProfile(at = [-12, -12])
-  |> angledLine(angle = 0deg, length = 24, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) + 90deg, length = 24, tag = $rectangleSegmentB001)
+  |> angledLine(angle = 0, length = 24, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = 24, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $rectangleSegmentD001)
   |> close()

public/kcl-samples/cycloidal-gear/main.kcl

@@ -8,17 +8,17 @@
 fn cycloidalGear(gearPitch, gearHeight, holeDiameter, helixAngle: number(deg)) {
   // Create a function to draw the gear profile as a sketch. Rotate each profile about the gear's axis by an helix angle proportional to the total gear height
   fn gearSketch(@gHeight) {
-    helixAngleP = (helixAngle * gHeight / gearHeight): number(deg)
+    helixAngleP = helixAngle * gHeight / gearHeight
     gearProfile = startSketchOn(offsetPlane(XY, offset = gHeight))
       |> startProfile(at = [
            gearPitch * 1.55 * cos(helixAngleP) + gearPitch * sin(-helixAngleP),
            gearPitch * 1.55 * sin(helixAngleP) + gearPitch * cos(-helixAngleP)
          ])
-      |> arc(angleStart = 90deg + helixAngleP, angleEnd = -90deg + helixAngleP, radius = gearPitch)
-      |> tangentialArc(radius = gearPitch * 1.67, angle = 60deg)
-      |> tangentialArc(radius = gearPitch, angle = -180deg)
-      |> tangentialArc(radius = gearPitch * 1.67, angle = 60deg)
-      |> tangentialArc(radius = gearPitch, angle = -180deg)
+      |> arc(angleStart = 90 + helixAngleP, angleEnd = -90 + helixAngleP, radius = gearPitch)
+      |> tangentialArc(radius = gearPitch * 1.67, angle = 60)
+      |> tangentialArc(radius = gearPitch, angle = -180)
+      |> tangentialArc(radius = gearPitch * 1.67, angle = 60)
+      |> tangentialArc(radius = gearPitch, angle = -180)
       |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
       |> close(%)
       |> subtract2d(tool = circle(center = [0, 0], radius = holeDiameter / 2))
@@ -40,5 +40,5 @@ cycloidalGear(
   gearPitch = .3,
   gearHeight = 1.5,
   holeDiameter = 0.297,
-  helixAngle = -80deg,
+  helixAngle = -80,
 )

public/kcl-samples/dodecahedron/main.kcl

@@ -5,7 +5,7 @@
 @settings(defaultLengthUnit = in, kclVersion = 1.0)
 
 // Define the dihedral angle for a regular dodecahedron
-dihedral = 116.565deg
+dihedral = 116.565
 
 // Create a face template function that makes a large thin cube
 fn createFaceTemplate(@dither) {
@@ -22,29 +22,29 @@ fn createFaceTemplate(@dither) {
 
 // Define the rotations array with [pitch, roll, yaw, dither] for each face
 faceRotations = [
-  [0deg, 0deg, 0deg, 0],
+  [0, 0, 0, 0],
   // face1 - reference face
-  [dihedral, 0deg, 0deg, 0.1],
+  [dihedral, 0, 0, 0.1],
   // face2
-  [dihedral, 0deg, 72deg, 0.2],
+  [dihedral, 0, 72, 0.2],
   // face3
-  [dihedral, 0deg, 144deg, 0.3],
+  [dihedral, 0, 144, 0.3],
   // face4
-  [dihedral, 0deg, 216deg, 0.4],
+  [dihedral, 0, 216, 0.4],
   // face5
-  [dihedral, 0deg, 288deg, 0.5],
+  [dihedral, 0, 288, 0.5],
   // face6
-  [180deg, 0deg, 0deg, 0.6],
+  [180, 0, 0, 0.6],
   // face7
-  [180deg - dihedral, 0deg, 36deg, 0.7],
+  [180 - dihedral, 0, 36, 0.7],
   // face8
-  [180deg - dihedral, 0deg, 108deg, 0.8],
+  [180 - dihedral, 0, 108, 0.8],
   // face9
-  [180deg - dihedral, 0deg, 180deg, 0.9],
+  [180 - dihedral, 0, 180, 0.9],
   // face10
-  [180deg - dihedral, 0deg, 252deg, 0.11],
+  [180 - dihedral, 0, 252, 0.11],
   // face11
-  [180deg - dihedral, 0deg, 324deg, 0.12],
+  [180 - dihedral, 0, 324, 0.12],
   // face12
 ]
 

public/kcl-samples/enclosure/main.kcl

@@ -14,8 +14,8 @@ holeDia = 4
 // Model a box with base enclosure dimensions
 sketch001 = startSketchOn(XY)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 0deg, length = width, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) + 90deg, length, tag = $rectangleSegmentB001)
+  |> angledLine(angle = 0, length = width, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = length, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $rectangleSegmentD001)
   |> close()
@@ -73,8 +73,8 @@ function001([
 // Define lid position and outer surface
 sketch003 = startSketchOn(XY)
   |> startProfile(at = [width * 1.2, 0])
-  |> angledLine(angle = 0deg, length = width, tag = $rectangleSegmentA002)
-  |> angledLine(angle = segAng(rectangleSegmentA001) + 90deg, length, tag = $rectangleSegmentB002)
+  |> angledLine(angle = 0, length = width, tag = $rectangleSegmentA002)
+  |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = length, tag = $rectangleSegmentB002)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC002)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $rectangleSegmentD002)
   |> close()
@@ -123,8 +123,8 @@ sketch004 = startSketchOn(extrude003, face = END)
        width * 1.2 + wallThickness,
        wallThickness
      ])
-  |> angledLine(angle = 0deg, length = width - (2 * wallThickness), tag = $rectangleSegmentA003)
-  |> angledLine(angle = segAng(rectangleSegmentA003) + 90deg, length = length - (2 * wallThickness), tag = $rectangleSegmentB003)
+  |> angledLine(angle = 0, length = width - (2 * wallThickness), tag = $rectangleSegmentA003)
+  |> angledLine(angle = segAng(rectangleSegmentA003) + 90, length = length - (2 * wallThickness), tag = $rectangleSegmentB003)
   |> angledLine(angle = segAng(rectangleSegmentA003), length = -segLen(rectangleSegmentA003), tag = $rectangleSegmentC003)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $rectangleSegmentD003)
   |> close()

public/kcl-samples/exhaust-manifold/main.kcl

@@ -27,9 +27,9 @@ fn primaryTube(n, angle001, length001, length002, length003) {
   sweepPath = startSketchOn(sweepPlane)
     |> startProfile(at = [0, plateHeight])
     |> line(end = [0, length001])
-    |> tangentialArc(angle = -80deg, radius = bendRadius, tag = $arc01)
+    |> tangentialArc(angle = -80, radius = bendRadius, tag = $arc01)
     |> angledLine(angle = tangentToEnd(arc01), length = length002)
-    |> tangentialArc(angle = 85deg, radius = bendRadius, tag = $arc02)
+    |> tangentialArc(angle = 85, radius = bendRadius, tag = $arc02)
     |> angledLine(angle = tangentToEnd(arc02), length = length003)
 
   // Create the cross section of each tube and sweep them
@@ -44,28 +44,28 @@ fn primaryTube(n, angle001, length001, length002, length003) {
 // Draw a primary tube for each cylinder with specified lengths and angles
 primaryTube(
   n = 0,
-  angle001 = 0deg,
+  angle001 = 0,
   length001 = 3,
   length002 = 6,
   length003 = 5,
 )
 primaryTube(
   n = 1,
-  angle001 = 1deg,
+  angle001 = 1,
   length001 = 3,
   length002 = 6,
   length003 = 5,
 )
 primaryTube(
   n = 2,
-  angle001 = 24.3deg,
+  angle001 = 24.3,
   length001 = 5,
   length002 = 5,
   length003 = 3,
 )
 primaryTube(
   n = 3,
-  angle001 = 25.2deg,
+  angle001 = 25.2,
   length001 = 5,
   length002 = 5,
   length003 = 3,
@@ -75,20 +75,20 @@ primaryTube(
 flangeSketch = startSketchOn(XY)
   |> startProfile(at = [3 + 1.3, -1.25])
   |> xLine(length = -2.6, tag = $seg01)
-  |> tangentialArc(radius = .3, angle = -40deg)
-  |> tangentialArc(radius = .9, angle = 80deg)
-  |> tangentialArc(radius = .3, angle = -40deg)
+  |> tangentialArc(radius = .3, angle = -40)
+  |> tangentialArc(radius = .9, angle = 80)
+  |> tangentialArc(radius = .3, angle = -40)
   |> xLine(length = -1.4, tag = $seg03)
   |> yLine(length = segLen(seg01), tag = $seg04)
   |> xLine(length = 3.1, tag = $seg05)
-  |> tangentialArc(radius = .3, angle = -40deg)
-  |> tangentialArc(radius = 1.5, angle = 80deg)
-  |> tangentialArc(radius = .3, angle = -40deg)
+  |> tangentialArc(radius = .3, angle = -40)
+  |> tangentialArc(radius = 1.5, angle = 80)
+  |> tangentialArc(radius = .3, angle = -40)
   |> xLine(length = segLen(seg05), tag = $seg07)
   |> yLine(endAbsolute = profileStartY(%), tag = $seg08)
   |> xLine(length = -segLen(seg03), tag = $seg09)
-  |> tangentialArc(radius = .3, angle = -40deg)
-  |> tangentialArc(radius = .9, angle = 80deg)
+  |> tangentialArc(radius = .3, angle = -40)
+  |> tangentialArc(radius = .9, angle = 80)
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

public/kcl-samples/flange/main.kcl

@@ -24,7 +24,7 @@ assert(nHoles, isGreaterThan = 1, error = "nHoles must be greater than 1")
 circles = startSketchOn(XY)
   |> circle(center = [mountingHolePlacementDiameter / 2, 0], radius = mountingHoleDia / 2)
   |> patternCircular2d(
-       arcDegrees = 360deg,
+       arcDegrees = 360,
        center = [0, 0],
        instances = nHoles,
        rotateDuplicates = true,

public/kcl-samples/food-service-spatula/main.kcl

@@ -20,23 +20,23 @@ gripSlotWidth = 8.0
 fn slot(sketch1, start, end, width) {
   angle = if start[0] == end[0] {
     if end[1] > start[1] {
-      90deg
+      90
     } else {
-      270deg
+      270
     }
   } else {
     if end[0] < start[0] {
-      units::toDegrees(atan((end[1] - start[1]) / (end[0] - start[0]))) + 180deg
+      units::toDegrees(atan((end[1] - start[1]) / (end[0] - start[0]))) + 180
     } else {
       units::toDegrees(atan((end[1] - start[1]) / (end[0] - start[0])))
     }
   }
   dist = sqrt(pow(end[1] - start[1], exp = 2) + pow(end[0] - start[0], exp = 2))
-  xstart = width / 2 * cos(angle - 90deg) + start[0]
-  ystart = width / 2 * sin(angle - 90deg) + start[1]
+  xstart = width / 2 * cos(angle - 90) + start[0]
+  ystart = width / 2 * sin(angle - 90) + start[1]
   slotSketch = startProfile(sketch1, at = [xstart, ystart])
     |> angledLine(angle = angle, length = dist)
-    |> tangentialArc(radius = width / 2, angle = 180deg)
+    |> tangentialArc(radius = width / 2, angle = 180)
     |> angledLine(angle = angle, length = -dist)
     |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
@@ -51,7 +51,7 @@ flipperProfile = startProfile(flipperSketch, at = [-flipperLength, -32.0])
   |> line(end = [flipperLength, 2.0])
   |> yLine(length = 60.0, tag = $backEdge)
   |> line(end = [-flipperLength, 2.0])
-  |> arc(angleStart = 163.087610deg, angleEnd = 196.912390deg, radius = 110.0)
+  |> arc(angleStart = 163.087610, angleEnd = 196.912390, radius = 110.0)
   |> close()
 
 // Create a profile of the middle
@@ -137,13 +137,13 @@ gripSketch = startSketchOn(handlePlane)
 // Create a profile of the grip
 gripProfile = startProfile(gripSketch, at = [-26.806746, -10.0])
   |> xLine(length = gripWidth - (2 * gripFilletRadius))
-  |> arc(angleStart = -90.0deg, angleEnd = 0.0deg, radius = gripFilletRadius)
+  |> arc(angleStart = -90.0, angleEnd = 0.0, radius = gripFilletRadius)
   |> yLine(length = gripHeight - (2 * gripFilletRadius))
-  |> arc(angleStart = 0.0deg, angleEnd = 90.0deg, radius = gripFilletRadius)
+  |> arc(angleStart = 0.0, angleEnd = 90.0, radius = gripFilletRadius)
   |> xLine(length = -(gripWidth - (2 * gripFilletRadius)))
-  |> arc(angleStart = 90.0deg, angleEnd = 180.0deg, radius = gripFilletRadius)
+  |> arc(angleStart = 90.0, angleEnd = 180.0, radius = gripFilletRadius)
   |> yLine(length = -(gripHeight - (2 * gripFilletRadius)), tag = $gripEdgeTop)
-  |> arc(angleStart = 180.0deg, angleEnd = 270.0deg, radius = gripFilletRadius)
+  |> arc(angleStart = 180.0, angleEnd = 270.0, radius = gripFilletRadius)
   |> close()
 
 // Extrude the grip profile to create the grip

public/kcl-samples/french-press/main.kcl

@@ -12,12 +12,12 @@ handleThickness = 0.65
 // Upper ring of the metal structure
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [carafeDiameter / 2, 5.7])
-  |> angledLine(angle = 0deg, length = 0.1, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0, length = 0.1, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = -0.75, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> revolve(angle = 360deg, axis = Y)
+  |> revolve(angle = 360, axis = Y)
 
 // Create an angled plane to sketch the supports
 plane001 = {
@@ -35,13 +35,13 @@ sketch002 = startSketchOn(plane001)
   |> arc(angleStart = 180, angleEnd = 205, radius = 0.3)
   |> angledLine(angle = -60, length = 0.6, tag = $edge2)
   |> arc(angleStart = 30, angleEnd = -120, radius = 0.6)
-  |> angledLine(angle = 150deg, endAbsoluteY = -0.2, tag = $edge3)
+  |> angledLine(angle = 150, endAbsoluteY = -0.2, tag = $edge3)
   |> arc(angleStart = 60, angleEnd = 90, radius = 0.5)
   |> xLine(endAbsolute = 0.1, tag = $edgeLen)
   |> yLine(length = 0.1)
   |> xLine(length = segLen(edgeLen) + 0.035, tag = $edge4)
   |> arc(angleStart = 90, angleEnd = 60, radius = 0.6)
-  |> angledLine(angle = 150deg, length = -segLen(edge3) + 0.035, tag = $edge5)
+  |> angledLine(angle = 150, length = -segLen(edge3) + 0.035, tag = $edge5)
   |> arc(angleStart = -120, angleEnd = 30, radius = 0.5)
   |> angledLine(angle = -60, length = -segLen(edge2) + 0.035, tag = $edge6)
   |> arc(angleStart = 205, angleEnd = 180, radius = 0.6)
@@ -81,9 +81,9 @@ extrude002 = extrude(sketch004, length = -0.050)
 sketch005 = startSketchOn(XZ)
   |> startProfile(at = [0.15, 1.11])
   |> xLine(endAbsolute = carafeDiameter / 2 - 0.2)
-  |> angledLine(angle = 30deg, endAbsoluteX = carafeDiameter / 2 - 0.07, tag = $seg1)
+  |> angledLine(angle = 30, endAbsoluteX = carafeDiameter / 2 - 0.07, tag = $seg1)
   |> angledLine(angle = -60, length = 0.050)
-  |> angledLine(angle = 30deg, length = -segLen(seg1))
+  |> angledLine(angle = 30, length = -segLen(seg1))
   |> xLine(endAbsolute = 0.15)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -93,7 +93,7 @@ sketch005 = startSketchOn(XZ)
 sketch006 = startSketchOn(XZ)
   |> startProfile(at = [0.1, 1])
   |> line(end = [0.1, 0])
-  |> angledLine(angle = 10deg, endAbsoluteX = 0.05)
+  |> angledLine(angle = 10, endAbsoluteX = 0.05)
   |> yLine(length = 10)
   |> line(end = [0.6, 0])
   |> yLine(length = -.05)

public/kcl-samples/gridfinity-bins-stacking-lip/main.kcl

@@ -269,7 +269,7 @@ axis001 = {
 lipSingleLengthCorner = revolve(lipFace(plane000), angle = -90, axis = axis001)
 
 // Create a single corner of the bin
-lipSingleWidthCorner = revolve(lipFace(plane002), angle = 90deg, axis = axis001)
+lipSingleWidthCorner = revolve(lipFace(plane002), angle = 90, axis = axis001)
 
 // Create the corners of the bin
 lipCorners000 = patternCircular3d(