Remove unused test code to fix console error (#6073)

* cleanup gen_std

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* cleanup docs

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* updates

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* fix table

Signed-off-by: Jess Frazelle <github@jessfraz.com>

---------

Signed-off-by: Jess Frazelle <github@jessfraz.com>

.eslintrc

@@ -20,9 +20,20 @@
       "plugin:react-hooks/recommended"
     ],
     "rules": {
+      "no-array-constructor": "off", // This is wrong; use the @typescript-eslint one instead.
+      "@typescript-eslint/no-array-constructor": "error",
+      "@typescript-eslint/no-array-delete": "error",
+      "@typescript-eslint/no-duplicate-enum-values": "error",
+      "@typescript-eslint/no-duplicate-type-constituents": "error",
       "@typescript-eslint/no-empty-object-type": "error",
       "@typescript-eslint/no-floating-promises": "error",
+      "no-implied-eval": "off", // This is wrong; use the @typescript-eslint one instead.
+      "@typescript-eslint/no-implied-eval": "error",
       "@typescript-eslint/no-misused-promises": "error",
+      "@typescript-eslint/no-namespace": "error",
+      "@typescript-eslint/no-unnecessary-type-assertion": "error",
+      "@typescript-eslint/no-unnecessary-type-constraint": "error",
+      "no-unused-vars": "off", // This is wrong; use the @typescript-eslint one instead.
       "@typescript-eslint/no-unused-vars": ["error", {
         "varsIgnorePattern": "^_",
         "argsIgnorePattern": "^_",
@@ -30,6 +41,7 @@
         "vars": "all",
         "args": "none"
       }],
+      "@typescript-eslint/prefer-as-const": "warn",
       "jsx-a11y/click-events-have-key-events": "off",
       "jsx-a11y/no-autofocus": "off",
       "jsx-a11y/no-noninteractive-element-interactions": "off",

.github/workflows/e2e-tests.yml

@@ -229,10 +229,6 @@ jobs:
           timeout_minutes: 30
           max_attempts: 3
         env:
-          CI: true
-          NODE_ENV: development
-          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-          VITE_KC_SKIP_AUTH: true
           token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
           snapshottoken: ${{ secrets.KITTYCAD_API_TOKEN }}
 
@@ -377,11 +373,7 @@ jobs:
           timeout_minutes: 45
           max_attempts: 15
         env:
-          CI: true
           FAIL_ON_CONSOLE_ERRORS: true
-          NODE_ENV: development
-          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-          VITE_KC_SKIP_AUTH: true
           token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
 
       - uses: actions/upload-artifact@v4

.github/workflows/static-analysis.yml

@@ -28,43 +28,57 @@ jobs:
       - run: yarn fmt-check
 
   yarn-build-wasm:
-    runs-on: ubuntu-22.04
-
+    # Build the wasm blob once on the fastest runner.
+    runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
     steps:
       - uses: actions/checkout@v4
+
       - uses: actions/setup-node@v4
         with:
           node-version-file: '.nvmrc'
           cache: 'yarn'
-      - run: yarn install
+
+      - name: Install dependencies
+        run: yarn install
+
+      - name: Use correct Rust toolchain
+        shell: bash
+        run: |
+          [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
+
+      - name: Install rust
+        uses: actions-rust-lang/setup-rust-toolchain@v1
+        with:
+          cache: false # Configured below.
+
       - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
-      - run: yarn build:wasm
 
-  yarn-tsc:
-    runs-on: ubuntu-22.04
-
-    steps:
-      - uses: actions/checkout@v4
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'yarn'
-      - run: yarn install
-      - run: yarn --cwd ./rust/kcl-language-server --modules-folder node_modules install
-      - uses: Swatinem/rust-cache@v2
+      - name: Rust Cache
+        uses: Swatinem/rust-cache@v2
         with:
           workspaces: './rust'
 
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
-        with:
-          tool: wasm-pack
-      - run: yarn build:wasm
-      - run: yarn tsc
+      - name: Build Wasm
+        shell: bash
+        run: yarn build:wasm
 
-  yarn-lint:
-    runs-on: ubuntu-22.04
+      - uses: actions/upload-artifact@v4
+        with:
+          name: prepared-wasm
+          path: |
+            rust/kcl-wasm-lib/pkg/kcl_wasm_lib*
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: prepared-ts-rs-bindings
+          path: |
+            rust/kcl-lib/bindings/*
+
+  yarn-tsc:
+    runs-on: ubuntu-latest
+    needs: yarn-build-wasm
 
     steps:
       - uses: actions/checkout@v4
@@ -73,7 +87,53 @@ jobs:
           node-version-file: '.nvmrc'
           cache: 'yarn'
       - run: yarn install
-      - run: yarn --cwd ./rust/kcl-language-server --modules-folder node_modules install
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
+
+      - run: yarn tsc
+
+  yarn-lint:
+    runs-on: ubuntu-latest
+    needs: yarn-build-wasm
+
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-node@v4
+        with:
+          node-version-file: '.nvmrc'
+          cache: 'yarn'
+      - run: yarn install
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
+
       - run: yarn lint
 
   python-codespell:
@@ -91,6 +151,7 @@ jobs:
 
   yarn-unit-test-kcl-samples:
     runs-on: ubuntu-latest
+    needs: yarn-build-wasm
     steps:
       - uses: actions/checkout@v4
 
@@ -103,7 +164,22 @@ jobs:
       - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
-      - run: yarn build:wasm
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
 
       - run: yarn simpleserver:bg
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
@@ -120,6 +196,7 @@ jobs:
 
   yarn-unit-test:
     runs-on: ubuntu-latest
+    needs: yarn-build-wasm
     steps:
       - uses: actions/checkout@v4
 
@@ -132,7 +209,22 @@ jobs:
       - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
-      - run: yarn build:wasm
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
 
       - run: yarn simpleserver:bg
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}

Makefile

@@ -37,7 +37,7 @@ build-web: public/kcl_wasm_lib_bg.wasm build/index.html
 build-desktop: public/kcl_wasm_lib_bg.wasm .vite/build/main.js
 
 public/kcl_wasm_lib_bg.wasm: $(CARGO_SOURCES)$(RUST_SOURCES)
-	yarn build:wasm
+	yarn build:wasm:dev
 
 build/index.html: $(REACT_SOURCES) $(TYPESCRIPT_SOURCES) $(VITE_SOURCES)
 	yarn build:local
@@ -99,7 +99,7 @@ test-e2e-web: install build-web ## Run the web e2e tests
 
 .PHONY: test-e2e-desktop
 test-e2e-desktop: install build-desktop ## Run the desktop e2e tests
-	yarn test:playwright:electron --workers=$(E2E_WORKERS) --max-failures=$(E2E_FAILURES) --grep=$(E2E_GREP)
+	yarn test:playwright:electron --workers=$(E2E_WORKERS) --max-failures=$(E2E_FAILURES) --grep="$(E2E_GREP)"
 
 ###############################################################################
 # CLEAN

docs/kcl/consts.md

@@ -9,13 +9,9 @@ layout: manual
 
 ### `std`
 
-- [`HALF_TURN`](/docs/kcl/consts/std-HALF_TURN)
-- [`QUARTER_TURN`](/docs/kcl/consts/std-QUARTER_TURN)
-- [`THREE_QUARTER_TURN`](/docs/kcl/consts/std-THREE_QUARTER_TURN)
 - [`XY`](/docs/kcl/consts/std-XY)
 - [`XZ`](/docs/kcl/consts/std-XZ)
 - [`YZ`](/docs/kcl/consts/std-YZ)
-- [`ZERO`](/docs/kcl/consts/std-ZERO)
 
 ### `std::math`
 
@@ -23,3 +19,10 @@ layout: manual
 - [`PI`](/docs/kcl/consts/std-math-PI)
 - [`TAU`](/docs/kcl/consts/std-math-TAU)
 
+### `std::turns`
+
+- [`HALF_TURN`](/docs/kcl/consts/std-turns-HALF_TURN)
+- [`QUARTER_TURN`](/docs/kcl/consts/std-turns-QUARTER_TURN)
+- [`THREE_QUARTER_TURN`](/docs/kcl/consts/std-turns-THREE_QUARTER_TURN)
+- [`ZERO`](/docs/kcl/consts/std-turns-ZERO)
+

docs/kcl/consts/std-HALF_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::HALF_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::HALF_TURN: number(deg) = 180deg
-```
-
-

docs/kcl/consts/std-QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::QUARTER_TURN: number(deg) = 90deg
-```
-
-

docs/kcl/consts/std-THREE_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::THREE_QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::THREE_QUARTER_TURN: number(deg) = 270deg
-```
-
-

docs/kcl/consts/std-ZERO.md

@@ -1,15 +0,0 @@
----
-title: "std::ZERO"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::ZERO: number = 0
-```
-
-

docs/kcl/consts/std-turns-HALF_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::HALF_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::HALF_TURN: number(deg) = 180deg
+```
+
+

docs/kcl/consts/std-turns-QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::QUARTER_TURN: number(deg) = 90deg
+```
+
+

docs/kcl/consts/std-turns-THREE_QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::THREE_QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::THREE_QUARTER_TURN: number(deg) = 270deg
+```
+
+

docs/kcl/consts/std-turns-ZERO.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::ZERO"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::ZERO: number = 0
+```
+
+

docs/kcl/index.md

@@ -23,19 +23,15 @@ layout: manual
   * [`tag`](kcl/types/tag)
 * **std**
   * [`Face`](kcl/types/Face)
-  * [`HALF_TURN`](kcl/consts/std-HALF_TURN)
   * [`Helix`](kcl/types/Helix)
   * [`Plane`](kcl/types/Plane)
   * [`Point2d`](kcl/types/Point2d)
   * [`Point3d`](kcl/types/Point3d)
-  * [`QUARTER_TURN`](kcl/consts/std-QUARTER_TURN)
   * [`Sketch`](kcl/types/Sketch)
   * [`Solid`](kcl/types/Solid)
-  * [`THREE_QUARTER_TURN`](kcl/consts/std-THREE_QUARTER_TURN)
   * [`XY`](kcl/consts/std-XY)
   * [`XZ`](kcl/consts/std-XZ)
   * [`YZ`](kcl/consts/std-YZ)
-  * [`ZERO`](kcl/consts/std-ZERO)
   * [`abs`](kcl/abs)
   * [`acos`](kcl/acos)
   * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
@@ -146,3 +142,8 @@ layout: manual
   * [`tan`](kcl/std-math-tan)
 * **std::sketch**
   * [`circle`](kcl/std-sketch-circle)
+* **std::turns**
+  * [`turns::HALF_TURN`](kcl/consts/std-turns-HALF_TURN)
+  * [`turns::QUARTER_TURN`](kcl/consts/std-turns-QUARTER_TURN)
+  * [`turns::THREE_QUARTER_TURN`](kcl/consts/std-turns-THREE_QUARTER_TURN)
+  * [`turns::ZERO`](kcl/consts/std-turns-ZERO)

docs/kcl/rotate.md

@@ -6,6 +6,10 @@ layout: manual
 
 Rotate a solid or a sketch.
 
+This is really useful for assembling parts together. You can create a part and then rotate it to the correct orientation.
+
+For sketches, you can use this to rotate a sketch and then loft it with another sketch.
+
 ### Using Roll, Pitch, and Yaw
 
 When rotating a part in 3D space, "roll," "pitch," and "yaw" refer to the three rotational axes used to describe its orientation: roll is rotation around the longitudinal axis (front-to-back), pitch is rotation around the lateral axis (wing-to-wing), and yaw is rotation around the vertical axis (up-down); essentially, it's like tilting the part on its side (roll), tipping the nose up or down (pitch), and turning it left or right (yaw).
@@ -166,7 +170,7 @@ fn square() {
 profile001 = square()
 
 profile002 = square()
-  |> translate(translate = [0, 0, 20])
+  |> translate(x = 0, y = 0, z = 20)
   |> rotate(axis = [0, 0, 1.0], angle = 45)
 
 loft([profile001, profile002])

docs/kcl/std-sketch-circle.md

@@ -17,7 +17,7 @@ circle(@sketch_or_surface: Sketch | Plane | Face, center: Point2d, radius: numbe
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_or_surface` | [`Sketch`](/docs/kcl/types/Sketch) `|` [`Plane`](/docs/kcl/types/Face) `|` [`Plane`](/docs/kcl/types/Face) | Sketch to extend, or plane or surface to sketch on. | Yes |
+| `sketch_or_surface` | [`Sketch`](/docs/kcl/types/Sketch) OR [`Plane`](/docs/kcl/types/Plane) OR [`Face`](/docs/kcl/types/Face) | Sketch to extend, or plane or surface to sketch on. | Yes |
 | `center` | [`Point2d`](/docs/kcl/types/Point2d) | The center of the circle. | Yes |
 | `radius` | [`number`](/docs/kcl/types/number) | The radius of the circle. | Yes |
 | [`tag`](/docs/kcl/types/tag) | [`tag`](/docs/kcl/types/tag) | Create a new tag which refers to this circle. | No |

docs/kcl/types/ExtrudeSurface.md

@@ -28,7 +28,7 @@ An extrude plane.
 | `faceId` |[`string`](/docs/kcl/types/string)| The face id for the extrude plane. | No |
 | [`tag`](/docs/kcl/types/tag) |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the geometry. | No |
-| `sourceRange` |[`SourceRange`](/docs/kcl/types/SourceRange)| The source range. | No |
+| `sourceRange` |`[integer, integer, integer]`| The source range. | No |
 
 
 ----
@@ -48,7 +48,7 @@ An extruded arc.
 | `faceId` |[`string`](/docs/kcl/types/string)| The face id for the extrude plane. | No |
 | [`tag`](/docs/kcl/types/tag) |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the geometry. | No |
-| `sourceRange` |[`SourceRange`](/docs/kcl/types/SourceRange)| The source range. | No |
+| `sourceRange` |`[integer, integer, integer]`| The source range. | No |
 
 
 ----
@@ -68,7 +68,7 @@ Geometry metadata.
 | `faceId` |[`string`](/docs/kcl/types/string)| The id for the chamfer surface. | No |
 | [`tag`](/docs/kcl/types/tag) |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the geometry. | No |
-| `sourceRange` |[`SourceRange`](/docs/kcl/types/SourceRange)| The source range. | No |
+| `sourceRange` |`[integer, integer, integer]`| The source range. | No |
 
 
 ----
@@ -88,7 +88,7 @@ Geometry metadata.
 | `faceId` |[`string`](/docs/kcl/types/string)| The id for the fillet surface. | No |
 | [`tag`](/docs/kcl/types/tag) |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the geometry. | No |
-| `sourceRange` |[`SourceRange`](/docs/kcl/types/SourceRange)| The source range. | No |
+| `sourceRange` |`[integer, integer, integer]`| The source range. | No |
 
 
 ----

docs/kcl/types/GeoMeta.md

@@ -17,6 +17,6 @@ Geometry metadata.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `id` |[`string`](/docs/kcl/types/string)| The id of the geometry. | No |
-| `sourceRange` |[`SourceRange`](/docs/kcl/types/SourceRange)| The source range. | No |
+| `sourceRange` |`[integer, integer, integer]`| The source range. | No |
 
 

docs/kcl/types/HelixValue.md

@@ -17,7 +17,7 @@ A helix.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `value` |[`string`](/docs/kcl/types/string)| The id of the helix. | No |
-| `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
+| `artifactId` |[`string`](/docs/kcl/types/string)| The artifact ID. | No |
 | `revolutions` |[`number`](/docs/kcl/types/number)| Number of revolutions. | No |
 | `angleStart` |[`number`](/docs/kcl/types/number)| Start angle (in degrees). | No |
 | `ccw` |`boolean`| Is the helix rotation counter clockwise? | No |

docs/kcl/types/KclValue.md

@@ -285,7 +285,7 @@ Data for an imported geometry.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `type` |enum: `Module`|  | No |
-| `value` |[`ModuleId`](/docs/kcl/types/ModuleId)| Identifier of a source file.  Uses a u32 to keep the size small. | No |
+| `value` |`integer`| Identifier of a source file.  Uses a u32 to keep the size small. | No |
 
 
 ----

docs/kcl/types/PolarCoordsData.md

@@ -17,6 +17,6 @@ Data for polar coordinates.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `angle` |[`number`](/docs/kcl/types/number)| The angle of the line (in degrees). | No |
-| `length` |[`TyF64`](/docs/kcl/types/TyF64)| The length of the line. | No |
+| `length` |[`number`](/docs/kcl/types/number)| The length of the line. | No |
 
 

docs/kcl/types/SketchSurface.md

@@ -25,7 +25,7 @@ A sketch type.
 |----------|------|-------------|----------|
 | `type` |enum: `plane`|  | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the plane. | No |
-| `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
+| `artifactId` |[`string`](/docs/kcl/types/string)| The artifact ID. | No |
 | `value` |[`PlaneType`](/docs/kcl/types/PlaneType)| Type for a plane. | No |
 | `origin` |[`Point3d`](/docs/kcl/types/Point3d)| Origin of the plane. | No |
 | `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane's X axis be? | No |
@@ -49,7 +49,7 @@ A face.
 |----------|------|-------------|----------|
 | `type` |enum: `face`|  | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the face. | No |
-| `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
+| `artifactId` |[`string`](/docs/kcl/types/string)| The artifact ID. | No |
 | `value` |[`string`](/docs/kcl/types/string)| The tag of the face. | No |
 | `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face's X axis be? | No |
 | `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face's Y axis be? | No |

docs/kcl/types/SourceRange.md

@@ -1,15 +0,0 @@
----
-title: "SourceRange"
-excerpt: ""
-layout: manual
----
-
-
-**Type:** `integer` (`uint`)
-
-
-
-
-
-
-

docs/kcl/types/TyF64.md

@@ -5,17 +5,11 @@ layout: manual
 ---
 
 
-**Type:** `object`
+**Type:** [`number`](/docs/kcl/types/number) (`double`)
 
 
 
 
 
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `n` |[`number`](/docs/kcl/types/number)|  | No |
-| `ty` |[`NumericType`](/docs/kcl/types/NumericType)|  | No |
 
 

e2e/playwright/basic-sketch.spec.ts

@@ -85,7 +85,7 @@ async function doBasicSketch(
   await page.mouse.click(startXPx, 500 - PUR * 20)
   if (openPanes.includes('code')) {
     await expect(u.codeLocator)
-      .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
+      .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
       commonPoints.startAt
     }, sketch001)
   |> xLine(length = ${commonPoints.num1})
@@ -119,10 +119,7 @@ async function doBasicSketch(
   await page.waitForTimeout(100)
 
   if (openPanes.includes('code')) {
-    await expect(
-      await u.getGreatestPixDiff(line1, TEST_COLORS.BLUE)
-    ).toBeLessThan(3)
-    await expect(await u.getGreatestPixDiff(line1, [0, 0, 255])).toBeLessThan(3)
+    expect(await u.getGreatestPixDiff(line1, TEST_COLORS.BLUE)).toBeLessThan(3)
   }
 
   // hold down shift
@@ -145,7 +142,7 @@ async function doBasicSketch(
   // Open the code pane.
   await u.openKclCodePanel()
   await expect(u.codeLocator)
-    .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
+    .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
     commonPoints.startAt
   }, sketch001)
   |> xLine(length = ${commonPoints.num1}, tag = $seg01)

e2e/playwright/boolean.spec.ts

@@ -0,0 +1,117 @@
+import { test, expect } from './zoo-test'
+import fs from 'node:fs/promises'
+import path from 'node:path'
+
+test.describe('Point and click for boolean workflows', () => {
+  // Boolean operations to test
+  const booleanOperations = [
+    {
+      name: 'union',
+      code: 'union([extrude001, extrude006])',
+    },
+    {
+      name: 'subtract',
+      code: 'subtract([extrude001], tools = [extrude006])',
+    },
+    {
+      name: 'intersect',
+      code: 'intersect([extrude001, extrude006])',
+    },
+  ] as const
+  for (let i = 0; i < booleanOperations.length; i++) {
+    const operation = booleanOperations[i]
+    const operationName = operation.name
+    const commandName = `Boolean ${
+      operationName.charAt(0).toUpperCase() + operationName.slice(1)
+    }`
+    test(`Create boolean operation -- ${operationName}`, async ({
+      context,
+      homePage,
+      cmdBar,
+      editor,
+      toolbar,
+      scene,
+      page,
+    }) => {
+      const file = await fs.readFile(
+        path.resolve(
+          __dirname,
+          '../../',
+          './rust/kcl-lib/e2e/executor/inputs/boolean-setup-with'
+        ),
+        'utf-8'
+      )
+      await context.addInitScript((file) => {
+        localStorage.setItem('persistCode', file)
+      }, file)
+      await homePage.goToModelingScene()
+      await scene.waitForExecutionDone()
+
+      await scene.settled(cmdBar)
+
+      // Test coordinates for selection - these might need adjustment based on actual scene layout
+      const cylinderPoint = { x: 592, y: 174 }
+      const secondObjectPoint = { x: 683, y: 273 }
+
+      // Create mouse helpers for selecting objects
+      const [clickFirstObject] = scene.makeMouseHelpers(
+        cylinderPoint.x,
+        cylinderPoint.y,
+        { steps: 10 }
+      )
+      const [clickSecondObject] = scene.makeMouseHelpers(
+        secondObjectPoint.x,
+        secondObjectPoint.y,
+        { steps: 10 }
+      )
+
+      await test.step(`Test ${operationName} operation`, async () => {
+        // Click the boolean operation button in the toolbar
+        await toolbar.selectBoolean(operationName)
+
+        // Verify command bar is showing the right command
+        await expect(cmdBar.page.getByTestId('command-name')).toContainText(
+          commandName
+        )
+
+        // Select first object in the scene, expect there to be a pixel diff from the selection color change
+        await clickFirstObject({ pixelDiff: 50 })
+
+        // For subtract, we need to proceed to the next step before selecting the second object
+        if (operationName !== 'subtract') {
+          // should down shift key to select multiple objects
+          await page.keyboard.down('Shift')
+        }
+
+        // Select second object
+        await clickSecondObject({ pixelDiff: 50 })
+
+        // Confirm the operation in the command bar
+        await cmdBar.progressCmdBar()
+
+        if (operationName === 'union' || operationName === 'intersect') {
+          await cmdBar.expectState({
+            stage: 'review',
+            headerArguments: {
+              Solids: '2 paths',
+            },
+            commandName,
+          })
+        } else if (operationName === 'subtract') {
+          await cmdBar.expectState({
+            stage: 'review',
+            headerArguments: {
+              Tool: '1 path',
+              Target: '1 path',
+            },
+            commandName,
+          })
+        }
+
+        await cmdBar.submit()
+
+        await editor.expectEditor.toContain(operation.code)
+      })
+    })
+  }
+})

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -46,7 +46,7 @@ test.describe(
         },
       }
 
-      const code = `sketch001 = startSketchOn(${plane})profile001 = startProfileAt([0.91, -1.22], sketch001)`
+      const code = `@settings(defaultLengthUnit = in)sketch001 = startSketchOn(${plane})profile001 = startProfileAt([0.91, -1.22], sketch001)`
 
       await u.openDebugPanel()
 

e2e/playwright/code-pane-and-errors.spec.ts

@@ -251,11 +251,11 @@ test(
       ])
       await Promise.all([
         fsp.copyFile(
-          executorInputPath('router-template-slate.kcl'),
+          executorInputPath('cylinder-inches.kcl'),
           join(routerTemplateDir, 'main.kcl')
         ),
         fsp.copyFile(
-          executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+          executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
           join(bracketDir, 'main.kcl')
         ),
       ])

e2e/playwright/desktop-export.spec.ts

@@ -20,11 +20,11 @@ test(
       await Promise.all([fsp.mkdir(bracketDir, { recursive: true })])
       await Promise.all([
         fsp.copyFile(
-          executorInputPath('router-template-slate.kcl'),
+          executorInputPath('cylinder-inches.kcl'),
           path.join(bracketDir, 'other.kcl')
         ),
         fsp.copyFile(
-          executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+          executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
           path.join(bracketDir, 'main.kcl')
         ),
       ])
@@ -107,7 +107,7 @@ test(
             },
             { timeout: 15_000 }
           )
-          .toBeGreaterThan(300_000)
+          .toBeGreaterThan(30_000)
       })
     })
 
@@ -187,7 +187,7 @@ test(
             },
             { timeout: 15_000 }
           )
-          .toBeGreaterThan(70_000)
+          .toBeGreaterThan(50_000)
       })
     })
   }

e2e/playwright/editor-tests.spec.ts

@@ -32,26 +32,30 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
     await page.keyboard.press('/')
     await page.keyboard.up('ControlOrMeta')
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XY)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  // |> close()`)
+  // |> close()`.replaceAll('\n', '')
+    )
 
     // uncomment the code
     await page.keyboard.down('ControlOrMeta')
     await page.keyboard.press('/')
     await page.keyboard.up('ControlOrMeta')
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XY)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  |> close()`)
+  |> close()`.replaceAll('\n', '')
+    )
   })
 
   test('ensure we use the cache, and do not re-execute', async ({
@@ -178,13 +182,15 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
     await page.locator('#code-pane button:first-child').click()
     await page.locator('button:has-text("Format code")').click()
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XY)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  |> close()`)
+  |> close()`.replaceAll('\n', '')
+    )
   })
 
   test('if you click the format button it formats your code and executes so lints are still there', async ({
@@ -227,13 +233,15 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
     await u.expectCmdLog('[data-message-type="execution-done"]')
     await u.closeDebugPanel()
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch_001 = startSketchOn(XY)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `@settings(defaultLengthUnit = in)
+sketch_001 = startSketchOn(XY)
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  |> close()`)
+  |> close()`.replaceAll('\n', '')
+    )
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-info').first()).toBeVisible()
@@ -471,6 +479,7 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
   test('if you write kcl with lint errors you get lints', async ({
     page,
     homePage,
+    scene,
   }) => {
     const u = await getUtils(page)
     await page.setBodyDimensions({ width: 1000, height: 500 })
@@ -490,10 +499,7 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
     await page.keyboard.press('ArrowLeft')
     await page.keyboard.press('ArrowRight')
 
-    // FIXME: lsp errors do not propagate to the frontend until engine is connected and code is executed
-    // This timeout is to wait for engine connection. LSP and code execution errors should be handled differently
-    // LSP can emit errors as fast as it waits and show them in the editor
-    await page.waitForTimeout(10000)
+    await scene.waitForExecutionDone()
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-info').first()).toBeVisible()
@@ -815,10 +821,12 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
       // there shouldn't be any auto complete options for 'lin' in the comment
       await expect(page.locator('.cm-completionLabel')).not.toBeVisible()
 
-      await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn(XZ)
+      await expect(page.locator('.cm-content')).toHaveText(
+        `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
         |> startProfileAt([3.14, 12], %)
-        |> xLine(%, length = 5) // lin`)
+        |> xLine(%, length = 5) // lin`.replaceAll('\n', '')
+      )
 
       // expect there to be no KCL errors
       await expect(page.locator('.cm-lint-marker-error')).toHaveCount(0)
@@ -888,10 +896,12 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
       // there shouldn't be any auto complete options for 'lin' in the comment
       await expect(page.locator('.cm-completionLabel')).not.toBeVisible()
 
-      await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn(XZ)
+      await expect(page.locator('.cm-content')).toHaveText(
+        `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
         |> startProfileAt([3.14, 12], %)
-        |> xLine(%, length = 5) // lin`)
+        |> xLine(%, length = 5) // lin`.replaceAll('\n', '')
+      )
     })
   })
   test('Can undo a click and point extrude with ctrl+z', async ({
@@ -1206,4 +1216,55 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
       })
     }
   )
+
+  test('Rectangle tool panning with middle click', async ({
+    page,
+    homePage,
+    toolbar,
+    scene,
+    cmdBar,
+    editor,
+  }) => {
+    await page.setBodyDimensions({ width: 1200, height: 900 })
+    await homePage.goToModelingScene()
+
+    // wait until scene is ready to be interacted with
+    await scene.connectionEstablished()
+    await scene.settled(cmdBar)
+
+    await page.getByRole('button', { name: 'Start Sketch' }).click()
+
+    // select an axis plane
+    await page.mouse.click(700, 200)
+
+    // Needed as we don't yet have a way to get a signal from the engine that the camera has animated to the sketch plane
+    await page.waitForTimeout(1000)
+
+    const middleMousePan = async (
+      startX: number,
+      startY: number,
+      endX: number,
+      endY: number
+    ) => {
+      const initialCode = await editor.getCurrentCode()
+
+      await page.mouse.click(startX, startY, { button: 'middle' })
+      await page.mouse.move(endX, endY, {
+        steps: 10,
+      })
+
+      // We expect the code to be the same, middle mouse click should not modify the code, only do panning
+      await editor.expectEditor.toBe(initialCode)
+    }
+
+    await test.step(`Verify corner rectangle panning`, async () => {
+      await page.getByTestId('corner-rectangle').click()
+      await middleMousePan(800, 500, 900, 600)
+    })
+
+    await test.step(`Verify center rectangle panning`, async () => {
+      await toolbar.selectCenterRectangle()
+      await middleMousePan(800, 200, 900, 300)
+    })
+  })
 })

e2e/playwright/fixtures/editorFixture.ts

@@ -81,6 +81,13 @@ export class EditorFixture {
   expectEditor = {
     toContain: this._expectEditorToContain(),
     not: { toContain: this._expectEditorToContain(true) },
+    toBe: async (code: string) => {
+      const currentCode = await this.getCurrentCode()
+      return expect(currentCode).toBe(code)
+    },
+  }
+  getCurrentCode = async () => {
+    return await this.codeContent.innerText()
   }
   snapshot = async (options?: { timeout?: number; name?: string }) => {
     const wasPaneOpen = await this.checkIfPaneIsOpen()

e2e/playwright/fixtures/sceneFixture.ts

@@ -310,7 +310,9 @@ export async function expectPixelColor(
     .toBeTruthy()
     .catch((cause) => {
       throw new Error(
-        `ExpectPixelColor: expecting ${colour} got ${finalValue}`,
+        `ExpectPixelColor: point ${JSON.stringify(
+          coords
+        )} was expecting ${colour} but got ${finalValue}`,
         { cause }
       )
     })

e2e/playwright/fixtures/toolbarFixture.ts

@@ -181,6 +181,14 @@ export class ToolbarFixture {
     ).toBeVisible()
     await this.page.getByTestId('dropdown-center-rectangle').click()
   }
+  selectBoolean = async (operation: 'union' | 'subtract' | 'intersect') => {
+    await this.page
+      .getByRole('button', { name: 'caret down Union: open menu' })
+      .click()
+    const operationTestId = `dropdown-boolean-${operation}`
+    await expect(this.page.getByTestId(operationTestId)).toBeVisible()
+    await this.page.getByTestId(operationTestId).click()
+  }
 
   selectCircleThreePoint = async () => {
     await this.page

e2e/playwright/lib/console-error-whitelist.ts

@@ -258,14 +258,6 @@ export const isErrorWhitelisted = (exception: Error) => {
       foundInSpec: 'e2e/playwright/testing-settings.spec.ts',
     },
     // TODO: fix this error in the code
-    {
-      name: 'TypeError',
-      message: "Cannot read properties of undefined (reading 'length')",
-      stack: '',
-      project: 'Google Chrome',
-      foundInSpec: '', // many tests are impacted by this error
-    },
-    // TODO: fix this error in the code
     {
       name: 'ReferenceError',
       message: '_testUtils is not defined',
@@ -273,7 +265,6 @@ export const isErrorWhitelisted = (exception: Error) => {
       project: 'Google Chrome',
       foundInSpec: 'e2e/playwright/snapshot-tests.spec.ts',
     },
-    // TODO: fix this error in the code
     {
       name: 'TypeError',
       message: 'Failed to fetch',
@@ -281,21 +272,13 @@ export const isErrorWhitelisted = (exception: Error) => {
       project: 'Google Chrome',
       foundInSpec: 'e2e/playwright/snapshot-tests.spec.ts',
     },
-    // TODO: fix this error in the code
     {
-      name: 'ReferenceError',
-      message: 'originalCode is not defined',
-      stack: '',
+      name: 'Error',
+      message: 'The "path" argument must be of type string. Received undefined',
+      stack:
+        'Error: The "path" argument must be of type string. Received undefined',
       project: 'Google Chrome',
-      foundInSpec: 'e2e/playwright/onboarding-tests.spec.ts',
-    },
-    // TODO: fix this error in the code
-    {
-      name: 'ReferenceError',
-      message: 'createNewVariableCheckbox is not defined',
-      stack: '',
-      project: 'Google Chrome',
-      foundInSpec: 'e2e/playwright/testing-constraints.spec.ts',
+      foundInSpec: '', // many tests are impacted by this error
     },
   ]
 

e2e/playwright/machines.spec.ts

@@ -11,7 +11,7 @@ test(
       const bracketDir = join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         join(bracketDir, 'main.kcl')
       )
     })
@@ -51,7 +51,7 @@ test(
       const bracketDir = join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         join(bracketDir, 'main.kcl')
       )
     })

e2e/playwright/onboarding-tests.spec.ts

@@ -230,9 +230,9 @@ test.describe('Onboarding tests', () => {
 
     // Override beforeEach test setup
     await context.addInitScript(
-      async ({ settingsKey, settings }) => {
+      async ({ settingsKey, settings, code }) => {
         // Give some initial code, so we can test that it's cleared
-        localStorage.setItem('persistCode', originalCode)
+        localStorage.setItem('persistCode', code)
         localStorage.setItem(settingsKey, settings)
       },
       {
@@ -240,6 +240,7 @@ test.describe('Onboarding tests', () => {
         settings: settingsToToml({
           settings: TEST_SETTINGS_ONBOARDING_EXPORT,
         }),
+        code: originalCode,
       }
     )
 

e2e/playwright/point-click.spec.ts

@@ -137,7 +137,7 @@ test.describe('Point-and-click tests', () => {
 
         await scene.moveCameraTo(cameraPos, cameraTarget)
 
-        await test.step('check chamfer selection changes cursor positon', async () => {
+        await test.step('check chamfer selection changes cursor position', async () => {
           await expect(async () => {
             // sometimes initial click doesn't register
             await clickChamfer()
@@ -173,7 +173,7 @@ test.describe('Point-and-click tests', () => {
         })
         await test.step('Check there is no errors after code created in previous steps executes', async () => {
           await editor.expectState({
-            activeLines: ['sketch001 = startSketchOn(XZ)'],
+            activeLines: ['@settings(defaultLengthUnit = in)'],
             highlightedCode: '',
             diagnostics: [],
           })
@@ -299,7 +299,8 @@ test.describe('Point-and-click tests', () => {
 
       await test.step('verify at the end of the test that final code is what is expected', async () => {
         await editor.expectEditor.toContain(
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
   |> angledLine([0, 268.43], %, $rectangleSegmentA001)
   |> angledLine([
@@ -369,7 +370,7 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
       })
     })
 
-    test('Works on chamfers that are non in a pipeExpression can break up multi edges in a chamfer array', async ({
+    test('Works on chamfers that are not in a pipeExpression can break up multi edges in a chamfer array', async ({
       context,
       page,
       homePage,
@@ -418,7 +419,8 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
         |>close()`,
       })
       await editor.expectEditor.toContain(
-        `sketch001 = startSketchOn(XZ)
+        `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([75.8, 317.2], %)
   |> angledLine([0, 268.43], %, $rectangleSegmentA001)
   |> angledLine([
@@ -1097,7 +1099,6 @@ openSketch = startSketchOn(XY)
           Mode: '',
           AngleStart: '',
           Revolutions: '',
-          Length: '',
           Radius: '',
           CounterClockWise: '',
         },
@@ -1194,14 +1195,14 @@ openSketch = startSketchOn(XY)
     {
       selectionType: 'segment',
       testPoint: { x: 513, y: 221 },
-      expectedOutput: `helix001 = helix(  axis = seg01,  radius = 1,  length = 100,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
-      expectedEditedOutput: `helix001 = helix(  axis = seg01,  radius = 1,  length = 50,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
+      expectedOutput: `helix001 = helix(  axis = seg01,  radius = 1,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
+      expectedEditedOutput: `helix001 = helix(  axis = seg01,  radius = 5,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
     },
     {
       selectionType: 'sweepEdge',
       testPoint: { x: 564, y: 364 },
-      expectedOutput: `helix001 = helix(  axis =   getOppositeEdge(seg01),  radius = 1,  length = 100,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
-      expectedEditedOutput: `helix001 = helix(  axis =   getOppositeEdge(seg01),  radius = 1,  length = 50,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
+      expectedOutput: `helix001 = helix(  axis =   getOppositeEdge(seg01),  radius = 1,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
+      expectedEditedOutput: `helix001 = helix(  axis =   getOppositeEdge(seg01),  radius = 5,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
     },
   ]
   helixCases.map(
@@ -1244,7 +1245,6 @@ openSketch = startSketchOn(XY)
               AngleStart: '',
               Mode: '',
               CounterClockWise: '',
-              Length: '',
               Radius: '',
               Revolutions: '',
             },
@@ -1261,8 +1261,6 @@ openSketch = startSketchOn(XY)
           await cmdBar.progressCmdBar()
           await page.keyboard.insertText('1')
           await cmdBar.progressCmdBar()
-          await page.keyboard.insertText('100')
-          await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
             headerArguments: {
@@ -1271,7 +1269,6 @@ openSketch = startSketchOn(XY)
               AngleStart: '0',
               Revolutions: '20',
               Radius: '1',
-              Length: '100',
               CounterClockWise: '',
             },
             commandName: 'Helix',
@@ -1292,8 +1289,8 @@ openSketch = startSketchOn(XY)
             0
           )
           await operationButton.dblclick()
-          const initialInput = '100'
-          const newInput = '50'
+          const initialInput = '1'
+          const newInput = '5'
           await cmdBar.expectState({
             commandName: 'Helix',
             stage: 'arguments',
@@ -1302,13 +1299,14 @@ openSketch = startSketchOn(XY)
             headerArguments: {
               AngleStart: '0',
               Revolutions: '20',
-              Radius: '1',
-              Length: initialInput,
+              Radius: initialInput,
               CounterClockWise: '',
             },
             highlightedHeaderArg: 'CounterClockWise',
           })
-          await page.keyboard.press('Shift+Backspace')
+          await page
+            .getByRole('button', { name: 'radius', exact: false })
+            .click()
           await expect(cmdBar.currentArgumentInput).toBeVisible()
           await cmdBar.currentArgumentInput
             .locator('.cm-content')
@@ -1319,8 +1317,7 @@ openSketch = startSketchOn(XY)
             headerArguments: {
               AngleStart: '0',
               Revolutions: '20',
-              Radius: '1',
-              Length: newInput,
+              Radius: newInput,
               CounterClockWise: '',
             },
             commandName: 'Helix',
@@ -1391,7 +1388,6 @@ extrude001 = extrude(profile001, length = 100)
           Mode: '',
           AngleStart: '',
           Revolutions: '',
-          Length: '',
           Radius: '',
           CounterClockWise: '',
         },
@@ -1645,9 +1641,10 @@ loft001 = loft([sketch001, sketch002])
     {
       targetType: 'circle',
       testPoint: { x: 700, y: 250 },
-      initialCode: `sketch001 = startSketchOn('YZ')
+      initialCode: `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(YZ)
 profile001 = circle(sketch001, center = [0, 0], radius = 500)
-sketch002 = startSketchOn('XZ')
+sketch002 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> xLine(length = -500)
   |> tangentialArcTo([-2000, 500], %)`,
@@ -1655,7 +1652,8 @@ sketch002 = startSketchOn('XZ')
     {
       targetType: 'rectangle',
       testPoint: { x: 710, y: 255 },
-      initialCode: `sketch001 = startSketchOn('YZ')
+      initialCode: `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(YZ)
 profile001 = startProfileAt([-400, -400], sketch001)
   |> angledLine([0, 800], %, $rectangleSegmentA001)
   |> angledLine([
@@ -1668,7 +1666,7 @@ profile001 = startProfileAt([-400, -400], sketch001)
      ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-sketch002 = startSketchOn('XZ')
+sketch002 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> xLine(length = -500)
   |> tangentialArcTo([-2000, 500], %)`,
@@ -1812,7 +1810,8 @@ sketch002 = startSketchOn('XZ')
     toolbar,
     cmdBar,
   }) => {
-    const initialCode = `sketch001 = startSketchOn(YZ)
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(YZ)
   |> circle(
        center = [0, 0],
        radius = 500
@@ -2481,7 +2480,8 @@ extrude001 = extrude(profile001, length = 5)
     cmdBar,
   }) => {
     // Code samples
-    const initialCode = `sketch001 = startSketchOn(XY)
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-12, -6], %)
   |> line(end = [0, 12])
   |> line(end = [24, 0])
@@ -2773,7 +2773,8 @@ extrude001 = extrude(sketch001, length = -12)
     toolbar,
   }) => {
     // Code samples
-    const initialCode = `sketch001 = startSketchOn(XY)
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-12, -6], %)
   |> line(end = [0, 12])
   |> line(end = [24, 0], tag = $seg02)
@@ -2927,7 +2928,8 @@ chamfer04 = chamfer(extrude001, length = 5, tags = [getOppositeEdge(seg02)])
       toolbar,
       cmdBar,
     }) => {
-      const initialCode = `sketch001 = startSketchOn(XZ)
+      const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 30)
 extrude001 = extrude(sketch001, length = 30)
     `
@@ -3062,7 +3064,8 @@ extrude001 = extrude(sketch001, length = 30)
     toolbar,
     cmdBar,
   }) => {
-    const initialCode = `sketch001 = startSketchOn(XY)
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-20, 20], %)
   |> xLine(length = 40)
   |> yLine(length = -60)
@@ -3180,7 +3183,8 @@ extrude001 = extrude(sketch001, length = 40)
   })
 
   const shellSketchOnFacesCases = [
-    `sketch001 = startSketchOn(XZ)
+    `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 100)
   |> extrude(length = 100)
 
@@ -3188,7 +3192,8 @@ sketch002 = startSketchOn(sketch001, 'END')
   |> circle(center = [0, 0], radius = 50)
   |> extrude(length = 50)
   `,
-    `sketch001 = startSketchOn(XZ)
+    `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 100)
 extrude001 = extrude(sketch001, length = 100)
 
@@ -3471,6 +3476,39 @@ segAng(rectangleSegmentA002),
 
       const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = 'X')`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
+
+      // Edit flow
+      const newAngle = '90'
+      await toolbar.openPane('feature-tree')
+      const operationButton = await toolbar.getFeatureTreeOperation(
+        'Revolve',
+        0
+      )
+      await operationButton.dblclick({ button: 'left' })
+      await cmdBar.expectState({
+        commandName: 'Revolve',
+        currentArgKey: 'angle',
+        currentArgValue: '360',
+        headerArguments: {
+          Angle: '360',
+        },
+        highlightedHeaderArg: 'angle',
+        stage: 'arguments',
+      })
+      await page.keyboard.insertText(newAngle)
+      await cmdBar.progressCmdBar()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          Angle: newAngle,
+        },
+        commandName: 'Revolve',
+      })
+      await cmdBar.progressCmdBar()
+      await toolbar.closePane('feature-tree')
+      await editor.expectEditor.toContain(
+        newCodeToFind.replace('angle = 360', 'angle = ' + newAngle)
+      )
     })
     test('revolve surface around edge from an extruded solid2d', async ({
       context,
@@ -3481,26 +3519,22 @@ segAng(rectangleSegmentA002),
       toolbar,
       cmdBar,
     }) => {
-      const initialCode = `
-sketch001 = startSketchOn(XZ)
-|> startProfileAt([-102.57, 101.72], %)
-|> angledLine([0, 202.6], %, $rectangleSegmentA001)
-|> angledLine([
-segAng(rectangleSegmentA001) - 90,
-202.6
-], %, $rectangleSegmentB001)
-|> angledLine([
-segAng(rectangleSegmentA001),
--segLen(rectangleSegmentA001)
-], %, $rectangleSegmentC001)
-|> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-|> close()
+      const initialCode = `sketch001 = startSketchOn(XZ)
+  |> startProfileAt([-102.57, 101.72], %)
+  |> angledLine([0, 202.6], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       202.6
+     ], %, $rectangleSegmentB001)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $rectangleSegmentC001)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
 extrude001 = extrude(sketch001, length = 50)
 sketch002 = startSketchOn(extrude001, rectangleSegmentA001)
-|> circle(
-center = [-11.34, 10.0],
-radius = 8.69
-)
+  |> circle(center = [-11.34, 10.0], radius = 8.69)
 `
       await context.addInitScript((initialCode) => {
         localStorage.setItem('persistCode', initialCode)
@@ -3518,9 +3552,49 @@ radius = 8.69
       const lineCodeToSelection = `|> angledLine([0, 202.6], %, $rectangleSegmentA001)`
       await page.getByText(lineCodeToSelection).click()
       await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
 
-      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = getOppositeEdge(rectangleSegmentA001)) `
-      expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
+      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = rectangleSegmentA001)`
+      await editor.expectEditor.toContain(newCodeToFind)
+
+      // Edit flow
+      const newAngle = '180'
+      await toolbar.openPane('feature-tree')
+      const operationButton = await toolbar.getFeatureTreeOperation(
+        'Revolve',
+        0
+      )
+      await operationButton.dblclick({ button: 'left' })
+      await cmdBar.expectState({
+        commandName: 'Revolve',
+        currentArgKey: 'angle',
+        currentArgValue: '360',
+        headerArguments: {
+          Angle: '360',
+        },
+        highlightedHeaderArg: 'angle',
+        stage: 'arguments',
+      })
+      await page.keyboard.insertText(newAngle)
+      await page.getByRole('button', { name: 'Create new variable' }).click()
+      await expect(page.getByPlaceholder('Variable name')).toHaveValue(
+        'angle001'
+      )
+      await cmdBar.progressCmdBar()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          Angle: newAngle,
+        },
+        commandName: 'Revolve',
+      })
+      await cmdBar.progressCmdBar()
+      await toolbar.closePane('feature-tree')
+      await editor.expectEditor.toContain('angle001 = ' + newAngle)
+      await editor.expectEditor.toContain(
+        newCodeToFind.replace('angle = 360', 'angle = angle001')
+      )
     })
     test('revolve sketch circle around line segment from startProfileAt sketch', async ({
       context,
@@ -3531,26 +3605,22 @@ radius = 8.69
       toolbar,
       cmdBar,
     }) => {
-      const initialCode = `
-    sketch002 = startSketchOn(XY)
-      |> startProfileAt([-2.02, 1.79], %)
-      |> xLine(length = 2.6)
-    sketch001 = startSketchOn('-XY')
-      |> startProfileAt([-0.48, 1.25], %)
-      |> angledLine([0, 2.38], %, $rectangleSegmentA001)
-      |> angledLine([segAng(rectangleSegmentA001) - 90, 2.4], %, $rectangleSegmentB001)
-      |> angledLine([
-        segAng(rectangleSegmentA001),
-          -segLen(rectangleSegmentA001)
-      ], %, $rectangleSegmentC001)
-      |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-      |> close()
-    extrude001 = extrude(sketch001, length = 5)
-    sketch003 = startSketchOn(extrude001, 'START')
-      |> circle(
-        center = [-0.69, 0.56],
-        radius = 0.28
-      )
+      const initialCode = `sketch002 = startSketchOn(XY)
+  |> startProfileAt([-2.02, 1.79], %)
+  |> xLine(length = 2.6)
+sketch001 = startSketchOn(-XY)
+  |> startProfileAt([-0.48, 1.25], %)
+  |> angledLine([0, 2.38], %, $rectangleSegmentA001)
+  |> angledLine([segAng(rectangleSegmentA001) - 90, 2.4], %, $rectangleSegmentB001)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $rectangleSegmentC001)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+extrude001 = extrude(sketch001, length = 5)
+sketch003 = startSketchOn(extrude001, 'START')
+  |> circle(center = [-0.69, 0.56], radius = 0.28)
 `
 
       await context.addInitScript((initialCode) => {
@@ -3569,9 +3639,44 @@ radius = 8.69
       const lineCodeToSelection = `|> xLine(length = 2.6)`
       await page.getByText(lineCodeToSelection).click()
       await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
 
       const newCodeToFind = `revolve001 = revolve(sketch003, angle = 360, axis = seg01)`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
+
+      // Edit flow
+      const newAngle = '270'
+      await toolbar.openPane('feature-tree')
+      const operationButton = await toolbar.getFeatureTreeOperation(
+        'Revolve',
+        0
+      )
+      await operationButton.dblclick({ button: 'left' })
+      await cmdBar.expectState({
+        commandName: 'Revolve',
+        currentArgKey: 'angle',
+        currentArgValue: '360',
+        headerArguments: {
+          Angle: '360',
+        },
+        highlightedHeaderArg: 'angle',
+        stage: 'arguments',
+      })
+      await page.keyboard.insertText(newAngle)
+      await cmdBar.progressCmdBar()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          Angle: newAngle,
+        },
+        commandName: 'Revolve',
+      })
+      await cmdBar.progressCmdBar()
+      await toolbar.closePane('feature-tree')
+      await editor.expectEditor.toContain(
+        newCodeToFind.replace('angle = 360', 'angle = ' + newAngle)
+      )
     })
   })
 
@@ -3584,7 +3689,8 @@ radius = 8.69
     toolbar,
     cmdBar,
   }) => {
-    const initialCode = `sketch001 = startSketchOn(XZ)
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = circle(
   sketch001,
   center = [0, 0],

e2e/playwright/projects.spec.ts

@@ -87,7 +87,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
     })
@@ -124,7 +124,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
       const errorDir = path.join(dir, 'broken-code')
@@ -162,7 +162,7 @@ test(
       // gray at this pixel means the stream has loaded in the most
       // user way we can verify it (pixel color)
       await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
+        .poll(() => u.getGreatestPixDiff(pointOnModel, [110, 110, 110]), {
           timeout: 10_000,
         })
         .toBeLessThan(20)
@@ -213,7 +213,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
       const emptyDir = path.join(dir, 'empty')
@@ -248,7 +248,7 @@ test(
       // gray at this pixel means the stream has loaded in the most
       // user way we can verify it (pixel color)
       await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
+        .poll(() => u.getGreatestPixDiff(pointOnModel, [125, 125, 125]), {
           timeout: 10_000,
         })
         .toBeLessThan(15)
@@ -290,7 +290,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
 
@@ -319,7 +319,7 @@ test(
       // gray at this pixel means the stream has loaded in the most
       // user way we can verify it (pixel color)
       await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
+        .poll(() => u.getGreatestPixDiff(pointOnModel, [125, 125, 125]), {
           timeout: 10_000,
         })
         .toBeLessThan(15)
@@ -359,7 +359,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
       await fsp.copyFile(
@@ -393,7 +393,7 @@ test(
       // gray at this pixel means the stream has loaded in the most
       // user way we can verify it (pixel color)
       await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
+        .poll(() => u.getGreatestPixDiff(pointOnModel, [125, 125, 125]), {
           timeout: 10_000,
         })
         .toBeLessThan(15)
@@ -443,7 +443,6 @@ test(
     await page.getByText('broken-code').click()
 
     // Gotcha: You can not use scene.waitForExecutionDone() since the KCL code is going to fail
-    await expect(page.getByTestId('loading')).toBeAttached()
     await expect(page.getByTestId('loading')).not.toBeAttached({
       timeout: 20_000,
     })
@@ -481,7 +480,7 @@ test.describe('Can export from electron app', () => {
           const bracketDir = path.join(dir, 'bracket')
           await fsp.mkdir(bracketDir, { recursive: true })
           await fsp.copyFile(
-            executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+            executorInputPath('cylinder-inches.kcl'),
             path.join(bracketDir, 'main.kcl')
           )
         })
@@ -513,7 +512,7 @@ test.describe('Can export from electron app', () => {
           // gray at this pixel means the stream has loaded in the most
           // user way we can verify it (pixel color)
           await expect
-            .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
+            .poll(() => u.getGreatestPixDiff(pointOnModel, [125, 125, 125]), {
               timeout: 10_000,
             })
             .toBeLessThan(15)
@@ -554,7 +553,7 @@ test.describe('Can export from electron app', () => {
               },
               { timeout: 15_000 }
             )
-            .toBeGreaterThan(300_000)
+            .toBeGreaterThan(50_000)
 
           // clean up exported file
           await fsp.rm(filepath)
@@ -1507,7 +1506,12 @@ test(
 
     await u.waitForPageLoad()
 
-    await page.locator('.cm-content').fill(`sketch001 = startSketchOn(XZ)
+    // The file should be prepopulated with the user's unit settings.
+    await expect(page.locator('.cm-content')).toHaveText(
+      '@settings(defaultLengthUnit = in)'
+    )
+
+    await page.locator('.cm-content').fill(`sketch001 = startSketchOn('XZ')
   |> startProfileAt([-87.4, 282.92], %)
   |> line(end = [324.07, 27.199], tag = $seg01)
   |> line(end = [118.328, -291.754])

e2e/playwright/regression-tests.spec.ts

@@ -4,9 +4,9 @@ import path from 'path'
 import * as fsp from 'fs/promises'
 import {
   getUtils,
-  executorInputPath,
   TEST_COLORS,
   TestColor,
+  executorInputPath,
   orRunWhenFullSuiteEnabled,
 } from './test-utils'
 import { TEST_CODE_TRIGGER_ENGINE_EXPORT_ERROR } from './storageStates'
@@ -331,7 +331,7 @@ extrude001 = extrude(sketch001, length = 50)
           localStorage.setItem(
             'persistCode',
             `@settings(defaultLengthUnit = mm)
-sketch002 = startSketchOn('XY')
+sketch002 = startSketchOn(XY)
 profile002 = startProfileAt([72.24, -52.05], sketch002)
   |> angledLine([0, 181.26], %, $rectangleSegmentA001)
   |> angledLine([
@@ -582,7 +582,7 @@ extrude002 = extrude(profile002, length = 150)
         const bracketDir = path.join(dir, 'bracket')
         await fsp.mkdir(bracketDir, { recursive: true })
         await fsp.copyFile(
-          executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+          executorInputPath('cylinder-inches.kcl'),
           path.join(bracketDir, 'main.kcl')
         )
       })
@@ -619,6 +619,7 @@ extrude002 = extrude(profile002, length = 150)
   test(`View gizmo stays visible even when zoomed out all the way`, async ({
     page,
     homePage,
+    scene,
   }) => {
     const u = await getUtils(page)
 
@@ -632,7 +633,7 @@ extrude002 = extrude(profile002, length = 150)
 
     await test.step(`Load an empty file`, async () => {
       await page.addInitScript(async () => {
-        localStorage.setItem('persistCode', '')
+        localStorage.setItem('persistCode', '@settings(defaultLengthUnit = in)')
       })
       await page.setBodyDimensions({ width: 1200, height: 500 })
       await homePage.goToModelingScene()
@@ -646,22 +647,31 @@ extrude002 = extrude(profile002, length = 150)
           timeout: 5000,
           message: 'Plane color is visible',
         })
-        .toBeLessThanOrEqual(15)
+        .toBeLessThanOrEqual(20)
+      await expect(scene.startEditSketchBtn).toBeEnabled()
 
       let maxZoomOuts = 10
       let middlePixelIsBackgroundColor =
         (await middlePixelIsColor(bgColor)) < 10
+
+      console.time('pressing control')
+      await page.keyboard.down('Control')
+
       while (!middlePixelIsBackgroundColor && maxZoomOuts > 0) {
-        await page.keyboard.down('Control')
-        await page.mouse.move(600, 460)
-        await page.mouse.down({ button: 'right' })
-        await page.mouse.move(600, 50, { steps: 20 })
-        await page.mouse.up({ button: 'right' })
-        await page.keyboard.up('Control')
         await page.waitForTimeout(100)
+        await page.mouse.move(650, 460)
+        console.time('moved to start point')
+        await page.mouse.down({ button: 'right' })
+        console.time('moused down')
+        await page.mouse.move(650, 50, { steps: 20 })
+        console.time('moved to end point')
+        await page.waitForTimeout(100)
+        await page.mouse.up({ button: 'right' })
+        console.time('moused up')
         maxZoomOuts--
-        middlePixelIsBackgroundColor = (await middlePixelIsColor(bgColor)) < 10
+        middlePixelIsBackgroundColor = (await middlePixelIsColor(bgColor)) < 15
       }
+      await page.keyboard.up('Control')
 
       expect(middlePixelIsBackgroundColor, {
         message: 'We should not see the default planes',
@@ -678,13 +688,12 @@ extrude002 = extrude(profile002, length = 150)
     homePage,
     scene,
     toolbar,
-    viewport,
   }) => {
     await context.folderSetupFn(async (dir) => {
       const legoDir = path.join(dir, 'lego')
       await fsp.mkdir(legoDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('lego.kcl'),
+        executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
         path.join(legoDir, 'main.kcl')
       )
     })
@@ -697,11 +706,8 @@ extrude002 = extrude(profile002, length = 150)
       await scene.loadingIndicator.waitFor({ state: 'detached' })
     })
     await test.step(`The part should start loading quickly, not waiting until execution is complete`, async () => {
-      await scene.expectPixelColor(
-        [143, 143, 143],
-        { x: (viewport?.width ?? 1200) / 2, y: (viewport?.height ?? 500) / 2 },
-        15
-      )
+      // TODO: use the viewport size to pick the center point, but the `viewport` fixture's values were wrong.
+      await scene.expectPixelColor([116, 116, 116], { x: 500, y: 250 }, 15)
     })
   })
 

e2e/playwright/sketch-tests.spec.ts

@@ -113,7 +113,8 @@ test.describe('Sketch tests', { tag: ['@skipWin'] }, () => {
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
-        `sketch001 = startSketchOn(XZ)
+        `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([2.61, -4.01], %)
   |> xLine(length = 8.73)
   |> tangentialArcTo([8.33, -1.31], %)`
@@ -159,7 +160,10 @@ test.describe('Sketch tests', { tag: ['@skipWin'] }, () => {
       await page.mouse.click(700, 200)
 
       await expect.poll(u.normalisedEditorCode, { timeout: 1000 })
-        .toBe(`sketch002 = startSketchOn(XZ)
+        .toBe(`@settings(defaultLengthUnit = in)
+
+
+sketch002 = startSketchOn(XZ)
 sketch001 = startProfileAt([12.34, -12.34], sketch002)
   |> yLine(length = 12.34)
 
@@ -789,7 +793,8 @@ sketch001 = startProfileAt([12.34, -12.34], sketch002)
       200
     )
 
-    let codeStr = 'sketch001 = startSketchOn(XY)'
+    let codeStr =
+      '@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XY)'
 
     await page.mouse.click(center.x, viewportSize.height * 0.55)
     await expect(u.codeLocator).toHaveText(codeStr)
@@ -868,7 +873,8 @@ sketch001 = startProfileAt([12.34, -12.34], sketch002)
 
       await u.openDebugPanel()
 
-      const code = `sketch001 = startSketchOn(-XZ)
+      const code = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(-XZ)
 profile001 = startProfileAt([${roundOff(scale * 69.6)}, ${roundOff(
         scale * 34.8
       )}], sketch001)
@@ -898,7 +904,7 @@ profile001 = startProfileAt([${roundOff(scale * 69.6)}, ${roundOff(
       await page.mouse.move(700, 200, { steps: 10 })
       await page.mouse.click(700, 200, { delay: 200 })
       await expect(page.locator('.cm-content')).toHaveText(
-        `sketch001 = startSketchOn(-XZ)`
+        `@settings(defaultLengthUnit = in)sketch001 = startSketchOn(-XZ)`
       )
 
       let prevContent = await page.locator('.cm-content').innerText()
@@ -1426,7 +1432,8 @@ test.describe(`Sketching with offset planes`, () => {
     await context.addInitScript(() => {
       localStorage.setItem(
         'persistCode',
-        `offsetPlane001 = offsetPlane(XY, offset = 10)`
+        `@settings(defaultLengthUnit = in)
+offsetPlane001 = offsetPlane(XY, offset = 10)`
       )
     })
 
@@ -1440,7 +1447,7 @@ test.describe(`Sketching with offset planes`, () => {
       await test.step(`Hovering should highlight code`, async () => {
         await planeHover()
         await editor.expectState({
-          activeLines: [`offsetPlane001=offsetPlane(XY,offset=10)`],
+          activeLines: [`@settings(defaultLengthUnit = in)`],
           diagnostics: [],
           highlightedCode: 'offsetPlane(XY, offset = 10)',
         })
@@ -1453,7 +1460,7 @@ test.describe(`Sketching with offset planes`, () => {
         await expect(toolbar.lineBtn).toBeEnabled()
         await editor.expectEditor.toContain('startSketchOn(offsetPlane001)')
         await editor.expectState({
-          activeLines: [`offsetPlane001=offsetPlane(XY,offset=10)`],
+          activeLines: [`@settings(defaultLengthUnit = in)`],
           diagnostics: [],
           highlightedCode: '',
         })
@@ -1604,7 +1611,8 @@ profile002 = startProfileAt([117.2, 56.08], sketch001)
       await context.addInitScript(() => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile002 = startProfileAt([40.68, 87.67], sketch001)
   |> xLine(length = 239.17)
 profile003 = startProfileAt([206.63, -56.73], sketch001)
@@ -2172,7 +2180,8 @@ profile003 = startProfileAt([206.63, -56.73], sketch001)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([6.24, 4.54], sketch001)
   |> line(end = [-0.41, 6.99])
   |> line(end = [8.61, 0.74])
@@ -2317,7 +2326,8 @@ profile004 = circleThreePoint(sketch001, p1 = [13.44, -6.8], p2 = [13.39, -2.07]
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([6.24, 4.54], sketch001)
   |> line(end = [-0.41, 6.99])
   |> line(end = [8.61, 0.74])
@@ -2422,7 +2432,8 @@ profile003 = circle(sketch001, center = [6.92, -4.2], radius = 3.16)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([-63.43, 193.08], sketch001)
   |> line(end = [168.52, 149.87])
   |> line(end = [190.29, -39.18])
@@ -2486,7 +2497,11 @@ extrude001 = extrude(profile003, length = 5)
     page,
   }) => {
     await page.addInitScript(async () => {
-      localStorage.setItem('persistCode', `myVar = 5`)
+      localStorage.setItem(
+        'persistCode',
+        `@settings(defaultLengthUnit = in)
+        myVar = 5`
+      )
     })
 
     await page.setBodyDimensions({ width: 1000, height: 500 })
@@ -2533,7 +2548,8 @@ extrude001 = extrude(profile003, length = 5)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([85.19, 338.59], sketch001)
   |> line(end = [213.3, -94.52])
   |> line(end = [-230.09, -55.34])
@@ -2575,7 +2591,8 @@ profile002 = startProfileAt([85.81, 52.55], sketch002)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `thePart = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+thePart = startSketchOn(XZ)
   |> startProfileAt([7.53, 10.51], %)
   |> line(end = [12.54, 1.83])
   |> line(end = [6.65, -6.91])
@@ -2636,7 +2653,8 @@ extrude001 = extrude(thePart, length = 75)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([6.71, -3.66], sketch001)
   |> line(end = [2.65, 9.02], tag = $seg02)
   |> line(end = [3.73, -9.36], tag = $seg01)
@@ -2809,7 +2827,8 @@ extrude003 = extrude(profile011, length = 2.5)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([34, 42.66], sketch001)
   |> line(end = [102.65, 151.99])
   |> line(end = [76, -138.66])

e2e/playwright/snapshot-tests.spec.ts

@@ -76,11 +76,11 @@ part001 = startSketchOn(-XZ)
   |> xLine(endAbsolute = totalLen, tag = $seg03)
   |> yLine(length = -armThick, tag = $seg01)
   |> angledLineThatIntersects({
-        angle = HALF_TURN,
+        angle = turns::HALF_TURN,
         offset = -armThick,
         intersectTag = seg04
       }, %)
-  |> angledLineToY([segAng(seg04, %) + 180, ZERO], %)
+  |> angledLineToY([segAng(seg04, %) + 180, turns::ZERO], %)
   |> angledLineToY({
         angle = -bottomAng,
         to = -totalHeightHalf - armThick,
@@ -88,12 +88,12 @@ part001 = startSketchOn(-XZ)
   |> xLine(length = endAbsolute = segEndX(seg03) + 0)
   |> yLine(length = -segLen(seg01, %))
   |> angledLineThatIntersects({
-        angle = HALF_TURN,
+        angle = turns::HALF_TURN,
         offset = -armThick,
         intersectTag = seg02
       }, %)
   |> angledLineToY([segAng(seg02, %) + 180, -baseHeight], %)
-  |> xLine(endAbsolute = ZERO)
+  |> xLine(endAbsolute = turns::ZERO)
   |> close()
   |> extrude(length = 4)`
       )

e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--change-colour.snap.json

@@ -1,5 +1,5 @@
 {
-  "original_source_code": "sketch001 = startSketchOn('XZ')\nprofile001 = startProfileAt([57.81, 250.51], sketch001)\n  |> line(end = [121.13, 56.63], tag = $seg02)\n  |> line(end = [83.37, -34.61], tag = $seg01)\n  |> line(end = [19.66, -116.4])\n  |> line(end = [-221.8, -41.69])\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude001 = extrude(profile001, length = 200)\nsketch002 = startSketchOn('XZ')\n  |> startProfileAt([-73.64, -42.89], %)\n  |> xLine(length = 173.71)\n  |> line(end = [-22.12, -94.4])\n  |> xLine(length = -156.98)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude002 = extrude(sketch002, length = 50)\nsketch003 = startSketchOn('XY')\n  |> startProfileAt([52.92, 157.81], %)\n  |> angledLine([0, 176.4], %, $rectangleSegmentA001)\n  |> angledLine([\n       segAng(rectangleSegmentA001) - 90,\n       53.4\n     ], %, $rectangleSegmentB001)\n  |> angledLine([\n       segAng(rectangleSegmentA001),\n       -segLen(rectangleSegmentA001)\n     ], %, $rectangleSegmentC001)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude003 = extrude(sketch003, length = 20)\n",
+  "original_source_code": "sketch001 = startSketchOn('XZ')\nprofile001 = startProfileAt([57.81, 250.51], sketch001)\n  |> line(end = [121.13, 56.63], tag = $seg02)\n  |> line(end = [83.37, -34.61], tag = $seg01)\n  |> line(end = [19.66, -116.4])\n  |> line(end = [-221.8, -41.69])\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude001 = extrude(profile001, length = 200)\nsketch002 = startSketchOn('XZ')\n  |> startProfileAt([-73.64, -42.89], %)\n  |> xLine(length = 173.71)\n  |> line(end = [-22.12, -94.4])\n  |> xLine(length = -156.98)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude002 = extrude(sketch002, length = 50)\nsketch003 = startSketchOn(XY)\n  |> startProfileAt([52.92, 157.81], %)\n  |> angledLine([0, 176.4], %, $rectangleSegmentA001)\n  |> angledLine([\n       segAng(rectangleSegmentA001) - 90,\n       53.4\n     ], %, $rectangleSegmentB001)\n  |> angledLine([\n       segAng(rectangleSegmentA001),\n       -segLen(rectangleSegmentA001)\n     ], %, $rectangleSegmentC001)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude003 = extrude(sketch003, length = 20)\n",
   "prompt": "make this neon green please, use #39FF14",
   "source_ranges": [
     {
@@ -30,4 +30,4 @@
     }
   ],
   "kcl_version": "0.2.48"
-}
+}

e2e/playwright/testing-constraints.spec.ts

@@ -4,7 +4,6 @@ import {
   getUtils,
   TEST_COLORS,
   pollEditorLinesSelectedLength,
-  executorInputPath,
   orRunWhenFullSuiteEnabled,
 } from './test-utils'
 import { XOR } from 'lib/utils'
@@ -81,7 +80,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
-        `yo = 79
+        `@settings(defaultLengthUnit = in)
+  yo = 79
   part001 = startSketchOn(XZ)
     |> startProfileAt([-7.54, -26.74], %)
     |> line(end = [74.36, 130.4], tag = $seg01)
@@ -145,7 +145,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4], tag = $seg01)
@@ -159,31 +160,6 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         |> xLine(length = segLen(seg_what))
         |> line(endAbsolute = [profileStartX(%), profileStartY(%)])`
           )
-
-          const isChecked = await createNewVariableCheckbox.isChecked()
-          const addVariable = testName === 'Add variable'
-          XOR(isChecked, addVariable) && // XOR because no need to click the checkbox if the state is already correct
-            (await createNewVariableCheckbox.click())
-
-          await page
-            .getByRole('button', { name: 'Add constraining value' })
-            .click()
-
-          // Wait for the codemod to take effect
-          await expect(page.locator('.cm-content')).toContainText(`angle: -57,`)
-          await expect(page.locator('.cm-content')).toContainText(
-            `offset: ${offset},`
-          )
-
-          await pollEditorLinesSelectedLength(page, 2)
-          const activeLinesContent = await page.locator('.cm-activeLine').all()
-          await expect(activeLinesContent[0]).toHaveText(
-            `|> line(end = [74.36, 130.4], tag = $seg01)`
-          )
-          await expect(activeLinesContent[1]).toHaveText(`}, %)`)
-
-          // checking the count of the overlays is a good proxy check that the client sketch scene is in a good state
-          await expect(page.getByTestId('segment-overlay')).toHaveCount(4)
         })
         const u = await getUtils(page)
         await page.setBodyDimensions({ width: 1200, height: 500 })
@@ -277,7 +253,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -387,7 +364,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -486,13 +464,13 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         testName: 'Add variable, selecting axis',
         addVariable: true,
         axisSelect: true,
-        value: 'QUARTER_TURN - angle001',
+        value: 'turns::QUARTER_TURN - angle001',
       },
       {
         testName: 'No variable, selecting axis',
         addVariable: false,
         axisSelect: true,
-        value: 'QUARTER_TURN - 7',
+        value: 'turns::QUARTER_TURN - 7',
       },
     ] as const
     for (const { testName, addVariable, value, axisSelect } of cases) {
@@ -500,7 +478,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -602,7 +581,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -688,7 +668,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+yo = 5
 part001 = startSketchOn(XZ)
   |> startProfileAt([-7.54, -26.74], %)
   |> line(end = [74.36, 130.4])
@@ -768,7 +749,8 @@ part002 = startSketchOn(XZ)
         await page.addInitScript(async (customCode) => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -869,7 +851,8 @@ part002 = startSketchOn(XZ)
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -935,12 +918,12 @@ part002 = startSketchOn(XZ)
   test.describe('Axis & segment - no modal constraints', () => {
     const cases = [
       {
-        codeAfter: `|> line(endAbsolute = [154.9, ZERO])`,
+        codeAfter: `|> line(endAbsolute = [154.9, turns::ZERO])`,
         axisClick: { x: 950, y: 250 },
         constraintName: 'Snap To X',
       },
       {
-        codeAfter: `|> line(endAbsolute = [ZERO, 61.34])`,
+        codeAfter: `|> line(endAbsolute = [turns::ZERO, 61.34])`,
         axisClick: { x: 600, y: 150 },
         constraintName: 'Snap To Y',
       },
@@ -950,7 +933,8 @@ part002 = startSketchOn(XZ)
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -1117,9 +1101,19 @@ test.describe('Electron constraint tests', () => {
       await context.folderSetupFn(async (dir) => {
         const bracketDir = path.join(dir, 'test-sample')
         await fsp.mkdir(bracketDir, { recursive: true })
-        await fsp.copyFile(
-          executorInputPath('angled_line.kcl'),
-          path.join(bracketDir, 'main.kcl')
+        await fsp.writeFile(
+          path.join(bracketDir, 'main.kcl'),
+          `@settings(defaultLengthUnit = in)
+          const part001 = startSketchOn(XY)
+            |> startProfileAt([4.83, 12.56], %)
+            |> line(end = [15.1, 2.48])
+            |> line(end = [3.15, -9.85], tag = $seg01)
+            |> line(end = [-15.17, -4.1])
+            |> angledLine([segAng(seg01), 12.35], %)
+            |> line(end = [-13.02, 10.03])
+            |> close()
+            |> extrude(length = 4)`,
+          'utf-8'
         )
       })
 

e2e/playwright/testing-gizmo.spec.ts

@@ -255,7 +255,7 @@ test.describe(`Testing gizmo, fixture-based`, () => {
     await context.addInitScript(() => {
       localStorage.setItem(
         'persistCode',
-        `
+        `@settings(defaultLengthUnit = in)
         const sketch002 = startSketchOn(XZ)
           |> startProfileAt([-108.83, -57.48], %)
           |> angledLine([0, 105.13], %, $rectangleSegmentA001)

e2e/playwright/testing-samples-loading.spec.ts

@@ -46,7 +46,7 @@ test.describe('Testing in-app sample loading', () => {
       page.getByRole('option', {
         name,
       })
-    const warningText = page.getByText('Overwrite current file and units?')
+    const warningText = page.getByText('Overwrite current file with sample?')
     const confirmButton = page.getByRole('button', { name: 'Submit command' })
 
     await test.step(`Precondition: check the initial code`, async () => {
@@ -110,11 +110,9 @@ test.describe('Testing in-app sample loading', () => {
       const commandMethodOption = page.getByRole('option', {
         name: 'Overwrite',
       })
-      const newFileWarning = page.getByText(
-        'Create a new file, overwrite project units?'
-      )
+      const newFileWarning = page.getByText('Create a new file from sample?')
       const overwriteWarning = page.getByText(
-        'Overwrite current file and units?'
+        'Overwrite current file with sample?'
       )
       const confirmButton = page.getByRole('button', { name: 'Submit command' })
       const projectMenuButton = page.getByTestId('project-sidebar-toggle')

e2e/playwright/testing-segment-overlays.spec.ts

@@ -210,7 +210,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+      part001 = startSketchOn(XZ)
         |> startProfileAt([5 + 0, 20 + 0], %)
         |> line(end = [0.5, -14 + 0])
         |> angledLine({ angle = 3 + 0, length = 32 + 0 }, %)
@@ -380,7 +381,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `yRel001 = -14
+          `@settings(defaultLengthUnit = in)
+    yRel001 = -14
     xRel001 = 0.5
     angle001 = 3
     len001 = 32
@@ -459,7 +461,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+      part001 = startSketchOn(XZ)
         |> startProfileAt([0, 0], %)
         |> line(end = [0.5, -14 + 0])
         |> angledLine({ angle = 3 + 0, length = 32 + 0 }, %)
@@ -590,7 +593,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+      part001 = startSketchOn(XZ)
         |> startProfileAt([0, 0], %)
         |> line(end = [0.5, -14 + 0])
         |> angledLine({ angle = 3 + 0, length = 32 + 0 }, %)
@@ -751,7 +755,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+      part001 = startSketchOn(XZ)
         |> startProfileAt([0, 0], %)
         |> line(end = [0.5, -14 + 0])
         |> angledLine({ angle = 3 + 0, length = 32 + 0 }, %)
@@ -831,7 +836,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([56.37, 120.33], sketch001)
   |> line(end = [162.86, 106.48])
   |> arcTo({
@@ -957,7 +963,8 @@ profile001 = startProfileAt([56.37, 120.33], sketch001)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+part001 = startSketchOn(XZ)
       |> circle(center = [1 + 0, 0], radius = 8)
     `
         )
@@ -1077,7 +1084,8 @@ profile001 = startProfileAt([56.37, 120.33], sketch001)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+part001 = startSketchOn(XZ)
   |>startProfileAt([0, 0], %)
   |> line(end = [0.5, -14 + 0])
   |> angledLine({ angle = 3 + 0, length = 32 + 0 }, %)
@@ -1351,7 +1359,8 @@ profile001 = startProfileAt([56.37, 120.33], sketch001)
             async ({ lineToBeDeleted, extraLine }) => {
               localStorage.setItem(
                 'persistCode',
-                `part001 = startSketchOn(XZ)
+                `@settings(defaultLengthUnit = in)
+        part001 = startSketchOn(XZ)
           |> startProfileAt([5, 6], %)
           |> ${lineToBeDeleted}
           |> line(end = [-10, -15])
@@ -1516,7 +1525,8 @@ profile001 = startProfileAt([56.37, 120.33], sketch001)
           async ({ lineToBeDeleted }) => {
             localStorage.setItem(
               'persistCode',
-              `part001 = startSketchOn(XZ)
+              `@settings(defaultLengthUnit = in)
+      part001 = startSketchOn(XZ)
         |> startProfileAt([5, 6], %)
         |> ${lineToBeDeleted}
         |> line(end = [-10, -15])

e2e/playwright/testing-selections.spec.ts

@@ -68,20 +68,20 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     await u.closeDebugPanel()
     await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
+      `@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
     )
 
     await page.waitForTimeout(100)
     await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
 
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
+      .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
     |> xLine(length = ${commonPoints.num1})`)
 
     await page.waitForTimeout(100)
     await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
+      .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
       commonPoints.startAt
     }, sketch001)
     |> xLine(length = ${commonPoints.num1})
@@ -89,7 +89,7 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     await page.waitForTimeout(100)
     await page.mouse.click(startXPx, 500 - PUR * 20)
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
+      .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
       commonPoints.startAt
     }, sketch001)
     |> xLine(length = ${commonPoints.num1})
@@ -260,7 +260,8 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
-        `sketch001 = startSketchOn(XZ)
+        `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([-79.26, 95.04], %)
   |> line(end = [112.54, 127.64], tag = $seg02)
   |> line(end = [170.36, -121.61], tag = $seg01)
@@ -528,7 +529,8 @@ profile001 = startProfileAt([7.49, 9.96], sketch001)
     await page.addInitScript(async (KCL_DEFAULT_LENGTH) => {
       localStorage.setItem(
         'persistCode',
-        `part001 = startSketchOn(XZ)
+        `@settings(defaultLengthUnit = in)
+part001 = startSketchOn(XZ)
   |> startProfileAt([20, 0], %)
   |> line(end = [7.13, 4 + 0])
   |> angledLine({ angle = 3 + 0, length = 3.14 + 0 }, %)
@@ -747,7 +749,8 @@ profile001 = startProfileAt([7.49, 9.96], sketch001)
     await page.waitForTimeout(200)
 
     await u.removeCurrentCode()
-    await u.codeLocator.fill(`sketch001 = startSketchOn(XZ)
+    await u.codeLocator.fill(`@settings(defaultLengthUnit = in)
+    sketch001 = startSketchOn(XZ)
     |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
     |> angledLine([0, 268.43], %, $rectangleSegmentA001)
     |> angledLine([
@@ -965,7 +968,8 @@ profile001 = startProfileAt([7.49, 9.96], sketch001)
       async ({ cases }) => {
         localStorage.setItem(
           'persistCode',
-          `yo = 79
+          `@settings(defaultLengthUnit = in)
+  yo = 79
   part001 = startSketchOn(XZ)
     |> startProfileAt([-7.54, -26.74], %)
     |> ${cases[0].expectedCode}
@@ -1020,7 +1024,8 @@ profile001 = startProfileAt([7.49, 9.96], sketch001)
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
-        `sketch001 = startSketchOn(XZ)
+        `@settings(defaultLengthUnit = in)
+  sketch001 = startSketchOn(XZ)
     |> startProfileAt([-79.26, 95.04], %)
     |> line(end = [112.54, 127.64])
     |> line(end = [170.36, -121.61], tag = $seg01)
@@ -1253,7 +1258,7 @@ profile001 = startProfileAt([7.49, 9.96], sketch001)
     await page.mouse.click(700, 200)
 
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn(XZ)`
+      `@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)`
     )
 
     await page.waitForTimeout(600)

e2e/playwright/testing-settings.spec.ts

@@ -271,7 +271,7 @@ test.describe('Testing settings', () => {
           const bracketDir = join(dir, projectName)
           await fsp.mkdir(bracketDir, { recursive: true })
           await fsp.copyFile(
-            executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+            executorInputPath('cylinder-inches.kcl'),
             join(bracketDir, 'main.kcl')
           )
         }
@@ -699,19 +699,19 @@ test.describe('Testing settings', () => {
           name: 'Current units are: ',
         })
         await gizmo.click()
-        const button = page.getByRole('button', {
+        const button = page.locator('ul').getByRole('button', {
           name: copy,
           exact: true,
         })
         await button.click()
         const toastMessage = page.getByText(
-          `Set default unit to "${unitOfMeasure}" for this project`
+          `Updated per-file units to ${unitOfMeasure}`
         )
         await expect(toastMessage).toBeVisible()
       }
 
-      await changeUnitOfMeasureInGizmo('in', 'Inches')
       await changeUnitOfMeasureInGizmo('ft', 'Feet')
+      await changeUnitOfMeasureInGizmo('in', 'Inches')
       await changeUnitOfMeasureInGizmo('yd', 'Yards')
       await changeUnitOfMeasureInGizmo('mm', 'Millimeters')
       await changeUnitOfMeasureInGizmo('cm', 'Centimeters')
@@ -951,9 +951,9 @@ test.describe('Testing settings', () => {
       )
     })
 
-    await test.step(`Initial units from settings`, async () => {
+    await test.step(`Initial units from settings are ignored`, async () => {
       await homePage.openProject('project-000')
-      await expect(unitsIndicator).toHaveText('Current units are: in')
+      await expect(unitsIndicator).toHaveText('Current units are: mm')
     })
 
     await test.step(`Manually write inline settings`, async () => {

e2e/playwright/various.spec.ts

@@ -67,11 +67,11 @@ part001 = startSketchOn(-XZ)
 |> xLine(endAbsolute = totalLen, tag = $seg03)
 |> yLine(length = -armThick, tag = $seg01)
 |> angledLineThatIntersects({
-      angle = HALF_TURN,
+      angle = turns::HALF_TURN,
       offset = -armThick,
       intersectTag = seg04
     }, %)
-|> angledLineToY([segAng(seg04) + 180, ZERO], %)
+|> angledLineToY([segAng(seg04) + 180, turns::ZERO], %)
 |> angledLineToY({
       angle = -bottomAng,
       to = -totalHeightHalf - armThick,
@@ -79,12 +79,12 @@ part001 = startSketchOn(-XZ)
 |> xLine(endAbsolute = segEndX(seg03) + 0)
 |> yLine(length = -segLen(seg01))
 |> angledLineThatIntersects({
-      angle = HALF_TURN,
+      angle = turns::HALF_TURN,
       offset = -armThick,
       intersectTag = seg02
     }, %)
 |> angledLineToY([segAng(seg02) + 180, -baseHeight], %)
-|> xLine(endAbsolute = ZERO)
+|> xLine(endAbsolute = turns::ZERO)
 |> close()
 |> extrude(length = 4)`
       )
@@ -483,7 +483,8 @@ test('Sketch on face', async ({ page, homePage, scene, cmdBar, toolbar }) => {
   await page.addInitScript(async () => {
     localStorage.setItem(
       'persistCode',
-      `sketch001 = startSketchOn(XZ)
+      `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 |> startProfileAt([3.29, 7.86], %)
 |> line(end = [2.48, 2.44])
 |> line(end = [2.66, 1.17])

package.json

@@ -13,20 +13,20 @@
   "license": "MIT",
   "dependencies": {
     "@codemirror/autocomplete": "^6.18.6",
-    "@codemirror/commands": "^6.8.0",
+    "@codemirror/commands": "^6.8.1",
     "@codemirror/language": "^6.11.0",
-    "@codemirror/lint": "^6.8.4",
+    "@codemirror/lint": "^6.8.5",
     "@codemirror/search": "^6.5.10",
-    "@codemirror/state": "^6.4.1",
+    "@codemirror/state": "^6.5.2",
     "@codemirror/theme-one-dark": "^6.1.2",
-    "@csstools/postcss-oklab-function": "^4.0.7",
+    "@csstools/postcss-oklab-function": "^4.0.8",
     "@fortawesome/fontawesome-svg-core": "^6.7.2",
     "@fortawesome/free-brands-svg-icons": "^6.7.2",
     "@fortawesome/free-solid-svg-icons": "^6.7.2",
     "@fortawesome/react-fontawesome": "^0.2.0",
     "@headlessui/react": "^1.7.19",
-    "@headlessui/tailwindcss": "^0.2.0",
-    "@kittycad/lib": "2.0.21",
+    "@headlessui/tailwindcss": "^0.2.2",
+    "@kittycad/lib": "2.0.23",
     "@lezer/highlight": "^1.2.1",
     "@lezer/lr": "^1.4.1",
     "@react-hook/resize-observer": "^2.0.1",
@@ -37,11 +37,11 @@
     "@xstate/react": "^4.1.1",
     "bonjour-service": "^1.3.0",
     "bson": "^6.10.3",
-    "chokidar": "^4.0.1",
+    "chokidar": "^4.0.3",
     "codemirror": "^6.0.1",
     "decamelize": "^6.0.0",
     "diff": "^7.0.0",
-    "electron-updater": "^6.6.0",
+    "electron-updater": "^6.6.2",
     "fuse.js": "^7.1.0",
     "html2canvas-pro": "^1.5.8",
     "isomorphic-fetch": "^3.0.0",
@@ -94,9 +94,11 @@
     "fetch:wasm": "./scripts/get-latest-wasm-bundle.sh",
     "fetch:wasm:windows": "./scripts/get-latest-wasm-bundle.ps1",
     "fetch:samples": "rm -rf public/kcl-samples* && curl -L -o public/kcl-samples.zip https://github.com/KittyCAD/kcl-samples/archive/refs/heads/achalmers/kw-args-xylineto.zip && unzip -o public/kcl-samples.zip -d public && mv public/kcl-samples-* public/kcl-samples",
-    "build:wasm-dev": "yarn wasm-prep && (cd rust && wasm-pack build kcl-wasm-lib --dev --target web --out-dir pkg && cargo test -p kcl-lib export_bindings) && yarn isomorphic-copy-wasm && yarn fmt:generated",
     "build:wasm": "./scripts/build-wasm.sh",
     "build:wasm:windows": "./scripts/build-wasm.ps1",
+    "build:wasm-dev": "yarn build:wasm:dev",
+    "build:wasm:dev": "./scripts/build-wasm-dev.sh",
+    "build:wasm:dev:windows": "./scripts/build-wasm-dev.ps1",
     "remove-importmeta": "sed -i 's/import.meta.url/window.location.origin/g' \"./rust/kcl-wasm-lib/pkg/kcl_wasm_lib.js\"; sed -i '' 's/import.meta.url/window.location.origin/g' \"./rust/kcl-wasm-lib/pkg/kcl_wasm_lib.js\" || echo \"sed for both mac and linux\"",
     "lint-fix": "eslint --fix --ext .ts --ext .tsx src e2e packages/codemirror-lsp-client/src rust/kcl-language-server/client/src",
     "lint": "eslint --max-warnings 0 --ext .ts --ext .tsx src e2e packages/codemirror-lsp-client/src rust/kcl-language-server/client/src",
@@ -162,15 +164,15 @@
     "@iarna/toml": "^2.2.5",
     "@lezer/generator": "^1.7.2",
     "@nabla/vite-plugin-eslint": "^2.0.5",
-    "@playwright/test": "^1.51.0",
+    "@playwright/test": "^1.51.1",
     "@testing-library/jest-dom": "^5.14.1",
     "@testing-library/react": "^15.0.2",
-    "@types/diff": "^7.0.1",
+    "@types/diff": "^7.0.2",
     "@types/electron": "^1.6.10",
     "@types/isomorphic-fetch": "^0.0.39",
     "@types/minimist": "^1.2.5",
     "@types/mocha": "^10.0.10",
-    "@types/node": "^22.13.9",
+    "@types/node": "^22.13.14",
     "@types/pixelmatch": "^5.2.6",
     "@types/pngjs": "^6.0.4",
     "@types/react": "^18.3.4",
@@ -180,13 +182,13 @@
     "@types/ua-parser-js": "^0.7.39",
     "@types/uuid": "^9.0.8",
     "@types/wicg-file-system-access": "^2023.10.5",
-    "@types/ws": "^8.5.13",
-    "@vitejs/plugin-react": "^4.3.0",
+    "@types/ws": "^8.18.0",
+    "@vitejs/plugin-react": "^4.3.4",
     "@vitest/web-worker": "^1.5.0",
     "@xstate/cli": "^0.5.17",
-    "autoprefixer": "^10.4.19",
+    "autoprefixer": "^10.4.21",
     "electron": "^34.1.1",
-    "electron-builder": "^26.0.6",
+    "electron-builder": "^26.0.12",
     "eslint": "^8.0.1",
     "eslint-plugin-css-modules": "^2.12.0",
     "eslint-plugin-import": "^2.31.0",
@@ -218,7 +220,7 @@
     "vite-tsconfig-paths": "^4.3.2",
     "vitest": "^1.6.1",
     "vitest-webgl-canvas-mock": "^1.1.0",
-    "ws": "^8.17.0",
+    "ws": "^8.18.1",
     "yarn": "^1.22.22"
   },
   "packageManager": "yarn@1.22.22+sha512.a6b2f7906b721bba3d67d4aff083df04dad64c399707841b7acf00f6b133b7ac24255f2652fa22ae3534329dc6180534e98d17432037ff6fd140556e2bb3137e"

packages/codemirror-lsp-client/src/client/codec/demuxer.ts

@@ -90,7 +90,7 @@ export default class StreamDemuxer extends Queue<Uint8Array> {
   }
 
   add(bytes: Uint8Array): void {
-    const message = Codec.decode(bytes) as vsrpc.Message
+    const message = Codec.decode<vsrpc.Message>(bytes)
     if (this.trace) {
       Tracer.server(message)
     }

public/kcl-samples/car-wheel-assembly/main.kcl

@@ -12,7 +12,7 @@ import "car-tire.kcl" as carTire
 import lugCount from "globals.kcl"
 
 carRotor
-  |> translate(translate = [0, 0.5, 0])
+  |> translate(x = 0, y = 0.5, z = 0)
 carWheel
 lugNut
   |> patternCircular3d(
@@ -23,5 +23,5 @@ lugNut
        rotateDuplicates = false,
      )
 brakeCaliper
-  |> translate(translate = [0, 0.5, 0])
+  |> translate(x = 0, y = 0.5, z = 0)
 carTire

public/kcl-samples/dual-basin-utility-sink/main.kcl

@@ -1,6 +1,7 @@
 // Dual-Basin Utility Sink
 // A stainless steel sink unit with dual rectangular basins and six under-counter storage compartments.
 
+// set units
 @settings(defaultLengthUnit = mm)
 
 // globals
@@ -12,7 +13,7 @@ profileThickness = 13
 metalThickness = 2
 
 blockCount = 3
-blockWidth = (tableWidth-profileThickness) / 3
+blockWidth = (tableWidth - profileThickness) / 3
 blockHeight = tableHeight - metalThickness - 0.5
 blockDepth = tableDepth - profileThickness
 
@@ -27,9 +28,9 @@ legHeight = blockHeight - profileThickness
 legCount = blockCount + 1
 
 legBody = startProfileAt([0, 0], floorPlane)
-  |> yLine(length=profileThickness)
-  |> xLine(length=profileThickness)
-  |> yLine(length=-profileThickness)
+  |> yLine(length = profileThickness)
+  |> xLine(length = profileThickness)
+  |> yLine(length = -profileThickness)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
   |> patternLinear2d(axis = [1, 0], instances = legCount, distance = blockWidth)
@@ -42,9 +43,9 @@ lowerBeltLengthX = blockWidth - profileThickness
 
 lowerBeltPlane = startSketchOn(offsetPlane(XY, offset = lowerBeltHeightAboveTheFloor))
 lowerBeltBodyX = startProfileAt([profileThickness, 0], lowerBeltPlane)
-  |> yLine(length=profileThickness)
-  |> xLine(length=lowerBeltLengthX)
-  |> yLine(length=-profileThickness)
+  |> yLine(length = profileThickness)
+  |> xLine(length = lowerBeltLengthX)
+  |> yLine(length = -profileThickness)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
   |> patternLinear2d(axis = [1, 0], instances = blockCount, distance = blockWidth)
@@ -53,12 +54,12 @@ lowerBeltBodyX = startProfileAt([profileThickness, 0], lowerBeltPlane)
 
 lowerBeltLengthY = blockDepth - profileThickness
 lowerBeltBodyY = startProfileAt([0, profileThickness], lowerBeltPlane)
-  |> yLine(length=lowerBeltLengthY)
-  |> xLine(length=profileThickness)
-  |> yLine(length=-lowerBeltLengthY)
+  |> yLine(length = lowerBeltLengthY)
+  |> xLine(length = profileThickness)
+  |> yLine(length = -lowerBeltLengthY)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> patternLinear2d(axis = [1, 0], instances = 2, distance = tableWidth-profileThickness)
+  |> patternLinear2d(axis = [1, 0], instances = 2, distance = tableWidth - profileThickness)
   |> extrude(length = profileThickness)
 
 // pillars
@@ -67,9 +68,9 @@ pillarPlane = startSketchOn(offsetPlane(XY, offset = pillarHeightAboveTheFloor))
 pillarTotalHeight = blockHeight - profileThickness - pillarHeightAboveTheFloor
 
 pillarBody = startProfileAt([blockSubdivisionWidth, 0], pillarPlane)
-  |> yLine(length=profileThickness)
-  |> xLine(length=profileThickness)
-  |> yLine(length=-profileThickness)
+  |> yLine(length = profileThickness)
+  |> xLine(length = profileThickness)
+  |> yLine(length = -profileThickness)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
   |> patternLinear2d(axis = [1, 0], instances = blockCount, distance = blockWidth)
@@ -80,9 +81,9 @@ pillarBody = startProfileAt([blockSubdivisionWidth, 0], pillarPlane)
 upperBeltPlane = startSketchOn(offsetPlane(XY, offset = blockHeight))
 
 upperBeltBodyX = startProfileAt([0, 0], upperBeltPlane)
-  |> yLine(length=profileThickness)
-  |> xLine(length=tableWidth)
-  |> yLine(length=-profileThickness)
+  |> yLine(length = profileThickness)
+  |> xLine(length = tableWidth)
+  |> yLine(length = -profileThickness)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
   |> patternLinear2d(axis = [0, 1], instances = 2, distance = blockDepth)
@@ -90,20 +91,20 @@ upperBeltBodyX = startProfileAt([0, 0], upperBeltPlane)
 
 upperBeltLengthY = blockDepth - profileThickness
 upperBeltBodyY = startProfileAt([0, profileThickness], upperBeltPlane)
-  |> yLine(length=upperBeltLengthY)
-  |> xLine(length=profileThickness)
-  |> yLine(length=-upperBeltLengthY)
+  |> yLine(length = upperBeltLengthY)
+  |> xLine(length = profileThickness)
+  |> yLine(length = -upperBeltLengthY)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> patternLinear2d(axis = [1, 0], instances = 2, distance = tableWidth-profileThickness)
+  |> patternLinear2d(axis = [1, 0], instances = 2, distance = tableWidth - profileThickness)
   |> extrude(length = -profileThickness)
 
 // sink
 tableTopPlane = startSketchOn(offsetPlane(XY, offset = tableHeight))
 tableTopBody = startProfileAt([0, 0], tableTopPlane)
-  |> yLine(length=tableDepth)
-  |> xLine(length=tableWidth)
-  |> yLine(length=-tableDepth)
+  |> yLine(length = tableDepth)
+  |> xLine(length = tableWidth)
+  |> yLine(length = -tableDepth)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
   |> extrude(length = -metalThickness)
@@ -114,59 +115,62 @@ sinkLength = 250
 sinkDepth = 200
 sinkOffsetFront = 40
 sinkOffsetLeft = 350
-sinkSpacing = tableWidth - sinkWidth - sinkOffsetLeft*2
+sinkSpacing = tableWidth - sinkWidth - (sinkOffsetLeft * 2)
 
 sinkPlaneOutside = startSketchOn(tableTopBody, 'START')
 sinkBodyOutside = startProfileAt([-sinkOffsetLeft, sinkOffsetFront], sinkPlaneOutside)
-  |> yLine(length=sinkLength)
-  |> xLine(length=-sinkWidth)
-  |> yLine(length=-sinkLength)
+  |> yLine(length = sinkLength)
+  |> xLine(length = -sinkWidth)
+  |> yLine(length = -sinkLength)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
   |> patternLinear2d(axis = [-1, 0], instances = sinkCount, distance = sinkSpacing)
   |> extrude(length = sinkDepth)
 
 sinkPlaneInside = startSketchOn(tableTopBody, 'END')
-sinkBodyInside = startProfileAt([sinkOffsetLeft+metalThickness, sinkOffsetFront+metalThickness], sinkPlaneInside)
-  |> yLine(length=sinkLength-metalThickness*2)
-  |> xLine(length=sinkWidth-metalThickness*2)
-  |> yLine(length=-sinkLength+metalThickness*2)
+sinkBodyInside = startProfileAt([
+       sinkOffsetLeft + metalThickness,
+       sinkOffsetFront + metalThickness
+     ], sinkPlaneInside)
+  |> yLine(length = sinkLength - (metalThickness * 2))
+  |> xLine(length = sinkWidth - (metalThickness * 2))
+  |> yLine(length = -sinkLength + metalThickness * 2)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
   |> patternLinear2d(axis = [1, 0], instances = sinkCount, distance = sinkSpacing)
   |> extrude(length = -sinkDepth)
-  
+
 // door panels
 doorGap = 2
-doorWidth = blockSubdivisionWidth - profileThickness - doorGap*2
-doorStart = profileThickness+doorGap
+doorWidth = blockSubdivisionWidth - profileThickness - (doorGap * 2)
+doorStart = profileThickness + doorGap
 doorHeightAboveTheFloor = pillarHeightAboveTheFloor + doorGap
 doorHeight = blockHeight - doorHeightAboveTheFloor - profileThickness - doorGap
 doorCount = blockCount * blockSubdivisionCount
 
 doorPlane = startSketchOn(offsetPlane(XY, offset = doorHeightAboveTheFloor))
 doorBody = startProfileAt([doorStart, 0], doorPlane)
-  |> yLine(length=profileThickness)
-  |> xLine(length=doorWidth)
-  |> yLine(length=-profileThickness)
+  |> yLine(length = profileThickness)
+  |> xLine(length = doorWidth)
+  |> yLine(length = -profileThickness)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
   |> patternLinear2d(axis = [1, 0], instances = doorCount, distance = blockSubdivisionWidth)
   |> extrude(length = doorHeight)
 
 // side panels
-panelWidth = blockDepth - profileThickness - doorGap*2
+panelWidth = blockDepth - profileThickness - (doorGap * 2)
 panelCount = doorCount + 1
 panelSpacing = tableWidth - profileThickness
 panelBody = startProfileAt([0, doorStart], doorPlane)
-  |> yLine(length=panelWidth)
-  |> xLine(length=profileThickness)
-  |> yLine(length=-panelWidth)
+  |> yLine(length = panelWidth)
+  |> xLine(length = profileThickness)
+  |> yLine(length = -panelWidth)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
   |> patternLinear2d(axis = [1, 0], instances = 2, distance = panelSpacing)
   |> extrude(length = doorHeight)
-  
+
 // handle
 handleDepth = 40
 handleWidth = 120
@@ -179,22 +183,25 @@ handleLengthSegmentB = handleWidth - (handleFillet * 2)
 handlePlane = startSketchOn(offsetPlane(XY, offset = handleHeightAboveTheFloor))
 
 handleProfilePath = startProfileAt([0 + handleOffset, 0], handlePlane)
-  |> yLine(length=-handleLengthSegmentA)
+  |> yLine(length = -handleLengthSegmentA)
   |> tangentialArcTo([
        handleFillet + handleOffset,
        -handleDepth
      ], %)
-  |> xLine(length=handleLengthSegmentB)
+  |> xLine(length = handleLengthSegmentB)
   |> tangentialArcTo([
        handleOffset + handleWidth,
        -handleLengthSegmentA
      ], %)
-  |> yLine(length=handleLengthSegmentA)
+  |> yLine(length = handleLengthSegmentA)
 handleSectionPlane = startSketchOn(XZ)
 handleProfileSection = circle(
   handleSectionPlane,
-  center = [handleOffset, handleHeightAboveTheFloor],
-  radius = 2)
-  
+  center = [
+    handleOffset,
+    handleHeightAboveTheFloor
+  ],
+  radius = 2,
+)
 handleBody = sweep(handleProfileSection, path = handleProfilePath)
   |> patternLinear3d(axis = [1, 0, 0], instances = doorCount, distance = blockSubdivisionWidth)

public/kcl-samples/i-beam/main.kcl

@@ -5,7 +5,7 @@
 @settings(defaultLengthUnit = in)
 
 // Define Beam Dimensions
-beamLength = 6*ft()
+beamLength = 6 * ft()
 beamHeight = 4
 flangeWidth = 2.663
 flangeThickness = 0.293

public/kcl-samples/makeup-mirror/main.kcl

@@ -52,19 +52,22 @@ armPartB = armFn(XZ, armLength, hingeHeight * 2.5 + hingeGap * 2)
 
 // mirror
 fn mirrorFn(plane, offsetX, offsetY, altitude, radius, tiefe, gestellR, gestellD) {
-  armPlane = startSketchOn(offsetPlane(plane, offset = offsetY - (tiefe / 2)))
+  armPlane = startSketchOn(  offsetPlane(plane, offset = offsetY - (tiefe / 2)))
   armBody = circle(armPlane, center = [offsetX, altitude], radius = radius)
     |> extrude(length = tiefe)
 
-  archBody = startProfileAt([offsetX-gestellR, altitude], armPlane)
+  archBody = startProfileAt([offsetX - gestellR, altitude], armPlane)
     |> xLine(length = gestellD)
     |> arcTo({
-         interior = [offsetX, altitude-gestellR],
-         end = [offsetX+gestellR, altitude]
+         interior = [offsetX, altitude - gestellR],
+         end = [offsetX + gestellR, altitude]
        }, %)
     |> xLine(length = gestellD)
     |> arcTo({
-         interior = [offsetX, altitude-gestellR-gestellD],
+         interior = [
+           offsetX,
+           altitude - gestellR - gestellD
+         ],
          end = [profileStartX(%), profileStartY(%)]
        }, %)
     |> close()
@@ -72,4 +75,4 @@ fn mirrorFn(plane, offsetX, offsetY, altitude, radius, tiefe, gestellR, gestellD
   return armBody
 }
 
-mirror = mirrorFn(XZ, armLength, armLength, hingeHeight * 4 + hingeGap * 3 + mirrorRadius+archToMirrorGap+archThickness, mirrorRadius, mirrorThickness, archRadius, archThickness)
+mirror = mirrorFn(XZ, armLength, armLength, hingeHeight * 4 + hingeGap * 3 + mirrorRadius + archToMirrorGap + archThickness, mirrorRadius, mirrorThickness, archRadius, archThickness)

public/kcl-samples/pipe-flange-assembly/91251a404-bolt.kcl

@@ -4,7 +4,6 @@
 // set units
 @settings(defaultLengthUnit = in)
 
-
 // import constants
 import boltDiameter, boltLength, boltHeadLength, boltHeadDiameter, boltHexDrive, boltHexFlatLength, boltThreadLength from "globals.kcl"
 

public/kcl-samples/pipe-flange-assembly/98017a257-washer.kcl

@@ -1,5 +1,5 @@
 // 98017A257 Washer
-// washer for the screws in the pipe flange assembly. 
+// washer for the screws in the pipe flange assembly.
 
 // set units
 @settings(defaultLengthUnit = in)

public/kcl-samples/pipe-flange-assembly/main.kcl

@@ -19,27 +19,15 @@ import pipe from "1120t74-pipe.kcl"
 flange()
 flange()
   |> rotate(axis = [0, 1, 0], angle = 180)
-  |> translate(translate = [
-       0,
-       0,
-       flangeBackHeight * 2 + gasketThickness
-     ])
+  |> translate(x = 0, y = 0, z = flangeBackHeight * 2 + gasketThickness)
 
 // place gasket between the flanges
 gasket()
-  |> translate(translate = [
-       0,
-       0,
-       -flangeBackHeight - gasketThickness
-     ])
+  |> translate(x = 0, y = 0, z = -flangeBackHeight - gasketThickness)
 
 // place eight washers (four front, four back)
 washer()
-  |> translate(translate = [
-       mountingHolePlacementDiameter / 2,
-       0,
-       flangeBaseThickness
-     ])
+  |> translate(x = mountingHolePlacementDiameter / 2, y = 0, z = flangeBaseThickness)
   |> patternCircular3d(
        %,
        instances = 4,
@@ -57,11 +45,7 @@ washer()
 
 // place four bolts
 bolt()
-  |> translate(translate = [
-       mountingHolePlacementDiameter / 2,
-       0,
-       flangeBaseThickness + washerThickness
-     ])
+  |> translate(x = mountingHolePlacementDiameter / 2, y = 0, z = flangeBaseThickness + washerThickness)
   |> rotate(roll = 90, pitch = 0, yaw = 0)
   |> patternCircular3d(
        %,
@@ -74,11 +58,7 @@ bolt()
 
 // place four hex nuts
 hexNut()
-  |> translate(translate = [
-       mountingHolePlacementDiameter / 2,
-       0,
-       -(flangeBackHeight * 2 + gasketThickness + flangeBaseThickness + washerThickness + hexNutThickness)
-     ])
+  |> translate(x = mountingHolePlacementDiameter / 2, y = 0, z = -(flangeBackHeight * 2 + gasketThickness + flangeBaseThickness + washerThickness + hexNutThickness))
   |> patternCircular3d(
        %,
        instances = 4,
@@ -98,11 +78,9 @@ pipe()
      )
   |> translate(
        %,
-       translate = [
-         0,
-         0,
-         flangeBaseThickness + flangeFrontHeight - 0.5
-       ],
+       x = 0,
+       y = 0,
+       z = flangeBaseThickness + flangeFrontHeight - 0.5,
        global = true,
      )
 
@@ -115,10 +93,8 @@ pipe()
      )
   |> translate(
        %,
-       translate = [
-         0,
-         0,
-         -(flangeBackHeight * 2 + gasketThickness + flangeBaseThickness + flangeFrontHeight - 0.5)
-       ],
+       x = 0,
+       y = 0,
+       z = -(flangeBackHeight * 2 + gasketThickness + flangeBaseThickness + flangeFrontHeight - 0.5),
        global = true,
      )

public/kcl-samples/router-template-cross-bar/main.kcl

@@ -14,7 +14,7 @@ radius = 10
 depth = 30
 distanceToInsideEdge = slateWidthHalf + templateThickness + templateGap
 sketch001 = startSketchOn(XZ)
-  |> startProfileAt([ZERO, depth + templateGap], %)
+  |> startProfileAt([0, depth + templateGap], %)
   |> xLine(length = slateWidthHalf - radius, tag = $seg01)
   |> arc({
        angleEnd = 0,
@@ -28,7 +28,7 @@ sketch001 = startSketchOn(XZ)
   |> yLine(length = templateThickness * 2, tag = $seg08)
   |> xLine(endAbsolute = segEndX(seg02) + 0, tag = $seg05)
   |> yLine(endAbsolute = segEndY(seg01) + templateThickness, tag = $seg10)
-  |> xLine(endAbsolute = ZERO, tag = $seg04)
+  |> xLine(endAbsolute = 0, tag = $seg04)
   |> xLine(length = -segLen(seg04))
   |> yLine(length = -segLen(seg10))
   |> xLine(length = -segLen(seg05))

public/kcl-samples/router-template-slate/main.kcl

@@ -28,7 +28,7 @@ sketch001 = startSketchOn(XZ)
   |> yLine(endAbsolute = -templateGap * 2 - (templateDiameter / 2), tag = $seg05)
   |> xLine(endAbsolute = slateWidthHalf + templateThickness, tag = $seg04)
   |> yLine(length = -length002, tag = $seg03)
-  |> xLine(endAbsolute = ZERO, tag = $seg02)
+  |> xLine(endAbsolute = 0, tag = $seg02)
   // |> line(end = [7.78, 11.16])
   |> xLine(length = -segLen(seg02))
   |> yLine(length = segLen(seg03))

public/kcl-samples/walkie-talkie/main.kcl

@@ -20,37 +20,25 @@ body()
 
 // import the antenna
 antenna()
-  |> translate(translate = [-width / 2 + .45, -0.10, height / 2])
+  |> translate(x = -width / 2 + .45, y = -0.10, z = height / 2)
 
 // import the case
 case()
-  |> translate(translate = [0, -1, 0])
+  |> translate(x = 0, y = -1, z = 0)
 
 // import the talk button
 talkButton()
-  |> translate(translate = [width / 2, -thickness / 2, .5])
+  |> translate(x = width / 2, y = -thickness / 2, z = .5)
 
 // import the frequency knob
 knob()
-  |> translate(translate = [
-       width / 2 - 0.70,
-       -thickness / 2,
-       height / 2
-     ])
+  |> translate(x = width / 2 - 0.70, y = -thickness / 2, z = height / 2)
 
 // import the buttons
 button()
-  |> translate(translate = [
-       -(screenWidth / 2 + tolerance),
-       -1,
-       screenYPosition
-     ])
+  |> translate(x = -(screenWidth / 2 + tolerance), y = -1, z = screenYPosition)
 button()
-  |> translate(translate = [
-       -(screenWidth / 2 + tolerance),
-       -1,
-       screenYPosition - buttonHeight - (tolerance * 2)
-     ])
+  |> translate(x = -(screenWidth / 2 + tolerance), y = -1, z = screenYPosition - buttonHeight - (tolerance * 2))
 button()
   |> rotate(
        %,
@@ -59,11 +47,9 @@ button()
        yaw = 0,
      )
   |> translate(
-       translate = [
-         screenWidth / 2 + tolerance,
-         -1,
-         screenYPosition - buttonHeight
-       ],
+       x = screenWidth / 2 + tolerance,
+       y = -1,
+       z = screenYPosition - buttonHeight,
        global = true,
      )
 button()
@@ -74,10 +60,8 @@ button()
        yaw = 0,
      )
   |> translate(
-       translate = [
-         screenWidth / 2 + tolerance,
-         -1,
-         screenYPosition - (buttonHeight * 2) - (tolerance * 2)
-       ],
+       x = screenWidth / 2 + tolerance,
+       y = -1,
+       z = screenYPosition - (buttonHeight * 2) - (tolerance * 2),
        global = true,
      )

rust/Cargo.lock

@@ -1780,7 +1780,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-bumper"
-version = "0.1.55"
+version = "0.1.56"
 dependencies = [
  "anyhow",
  "clap",
@@ -1791,7 +1791,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-derive-docs"
-version = "0.1.55"
+version = "0.1.56"
 dependencies = [
  "Inflector",
  "anyhow",
@@ -1810,7 +1810,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-directory-test-macro"
-version = "0.1.55"
+version = "0.1.56"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -1819,7 +1819,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-language-server"
-version = "0.2.55"
+version = "0.2.56"
 dependencies = [
  "anyhow",
  "clap",
@@ -1840,7 +1840,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-language-server-release"
-version = "0.1.55"
+version = "0.1.56"
 dependencies = [
  "anyhow",
  "clap",
@@ -1860,7 +1860,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-lib"
-version = "0.2.55"
+version = "0.2.56"
 dependencies = [
  "anyhow",
  "approx 0.5.1",
@@ -1928,7 +1928,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-python-bindings"
-version = "0.3.55"
+version = "0.3.56"
 dependencies = [
  "anyhow",
  "kcl-lib",
@@ -1943,7 +1943,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-test-server"
-version = "0.1.55"
+version = "0.1.56"
 dependencies = [
  "anyhow",
  "hyper 0.14.32",
@@ -1956,7 +1956,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-to-core"
-version = "0.1.55"
+version = "0.1.56"
 dependencies = [
  "anyhow",
  "async-trait",
@@ -1970,7 +1970,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-wasm-lib"
-version = "0.1.55"
+version = "0.1.56"
 dependencies = [
  "bson",
  "console_error_panic_hook",
@@ -1996,9 +1996,9 @@ dependencies = [
 
 [[package]]
 name = "kittycad"
-version = "0.3.33"
+version = "0.3.36"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4f6f65645cc07a8f43c34584e4979bf4da16c047cce50c4715fa9381227574d5"
+checksum = "0a345fd2a4cb16205f32bd1aa41715045830c59d78c59927fca6580e2a651ac9"
 dependencies = [
  "anyhow",
  "async-trait",

rust/Cargo.toml

@@ -35,7 +35,7 @@ clap = { version = "4.5.31", features = ["derive"] }
 dashmap = { version = "6.1.0" }
 http = "1"
 indexmap = "2.7.0"
-kittycad = { version = "0.3.33", default-features = false, features = ["js", "requests"] }
+kittycad = { version = "0.3.36", default-features = false, features = ["js", "requests"] }
 kittycad-modeling-cmds = { version = "0.2.107", features = ["ts-rs", "websocket"] }
 lazy_static = "1.5.0"
 miette = "7.5.0"

rust/justfile

@@ -43,6 +43,10 @@ overwrite-sim-test test_name:
     EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} -p kcl-lib --no-quiet -- tests::{{test_name}}::kcl_test_execute
     EXPECTORATE=overwrite {{cita}} -p kcl-lib --no-quiet -- simulation_tests::{{test_name}}::test_after_engine
 
+# Regenerate all the simulation test output.
+redo-sim-tests:
+    EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} -p kcl-lib --no-quiet -- simulation_tests
+
 test:
     export RUST_BRACKTRACE="full" && cargo nextest run --workspace --no-fail-fast
 

rust/kcl-bumper/Cargo.toml

@@ -1,7 +1,7 @@
 
 [package]
 name = "kcl-bumper"
-version = "0.1.55"
+version = "0.1.56"
 edition = "2021"
 repository = "https://github.com/KittyCAD/modeling-api"
 rust-version = "1.76"

rust/kcl-derive-docs/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-derive-docs"
 description = "A tool for generating documentation from Rust derive macros"
-version = "0.1.55"
+version = "0.1.56"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"

rust/kcl-derive-docs/src/lib.rs

@@ -329,7 +329,7 @@ fn do_stdlib_inner(
         let camel_case_arg_name = to_camel_case(&arg_name);
         if ty_string != "ExecState" && ty_string != "Args" {
             let schema = quote! {
-                #docs_crate::cleanup_number_tuples_root(generator.root_schema_for::<#ty_ident>())
+                generator.root_schema_for::<#ty_ident>()
             };
             arg_types.push(quote! {
                 #docs_crate::StdLibFnArg {
@@ -394,7 +394,7 @@ fn do_stdlib_inner(
     let return_type = if !ret_ty_string.is_empty() || ret_ty_string != "()" {
         let ret_ty_string = rust_type_to_openapi_type(&ret_ty_string);
         quote! {
-            let schema = #docs_crate::cleanup_number_tuples_root(generator.root_schema_for::<#return_type_inner>());
+            let schema = generator.root_schema_for::<#return_type_inner>();
             Some(#docs_crate::StdLibFnArg {
                 name: "".to_string(),
                 type_: #ret_ty_string.to_string(),
@@ -816,7 +816,7 @@ fn generate_code_block_test(fn_name: &str, code_block: &str, index: usize) -> pr
         async fn #test_name() -> miette::Result<()> {
             let code = #code_block;
             // Note, `crate` must be kcl_lib
-            let result = match crate::test_server::execute_and_snapshot(code, crate::settings::types::UnitLength::Mm, None).await {
+            let result = match crate::test_server::execute_and_snapshot(code, None).await {
                 Err(crate::errors::ExecError::Kcl(e)) => {
                     return Err(miette::Report::new(crate::errors::Report {
                         error: e.error,

rust/kcl-derive-docs/tests/args_with_lifetime.gen

@@ -31,13 +31,7 @@ mod test_examples_someFn {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_someFn0() -> miette::Result<()> {
         let code = "someFn()";
-        let result = match crate::test_server::execute_and_snapshot(
-            code,
-            crate::settings::types::UnitLength::Mm,
-            None,
-        )
-        .await
-        {
+        let result = match crate::test_server::execute_and_snapshot(code, None).await {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,
@@ -108,7 +102,7 @@ impl crate::docs::StdLibFn for SomeFn {
         vec![crate::docs::StdLibFnArg {
             name: "data".to_string(),
             type_: "Foo".to_string(),
-            schema: crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<Foo>()),
+            schema: generator.root_schema_for::<Foo>(),
             required: true,
             label_required: true,
             description: String::new().to_string(),
@@ -120,7 +114,7 @@ impl crate::docs::StdLibFn for SomeFn {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        let schema = crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<i32>());
+        let schema = generator.root_schema_for::<i32>();
         Some(crate::docs::StdLibFnArg {
             name: "".to_string(),
             type_: "i32".to_string(),

rust/kcl-derive-docs/tests/args_with_refs.gen

@@ -31,13 +31,7 @@ mod test_examples_someFn {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_someFn0() -> miette::Result<()> {
         let code = "someFn()";
-        let result = match crate::test_server::execute_and_snapshot(
-            code,
-            crate::settings::types::UnitLength::Mm,
-            None,
-        )
-        .await
-        {
+        let result = match crate::test_server::execute_and_snapshot(code, None).await {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,
@@ -108,7 +102,7 @@ impl crate::docs::StdLibFn for SomeFn {
         vec![crate::docs::StdLibFnArg {
             name: "data".to_string(),
             type_: "string".to_string(),
-            schema: crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<str>()),
+            schema: generator.root_schema_for::<str>(),
             required: true,
             label_required: true,
             description: String::new().to_string(),
@@ -120,7 +114,7 @@ impl crate::docs::StdLibFn for SomeFn {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        let schema = crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<i32>());
+        let schema = generator.root_schema_for::<i32>();
         Some(crate::docs::StdLibFnArg {
             name: "".to_string(),
             type_: "i32".to_string(),

rust/kcl-derive-docs/tests/array.gen

@@ -32,13 +32,7 @@ mod test_examples_show {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_show0() -> miette::Result<()> {
         let code = "This is another code block.\nyes sirrr.\nshow";
-        let result = match crate::test_server::execute_and_snapshot(
-            code,
-            crate::settings::types::UnitLength::Mm,
-            None,
-        )
-        .await
-        {
+        let result = match crate::test_server::execute_and_snapshot(code, None).await {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,
@@ -109,9 +103,7 @@ impl crate::docs::StdLibFn for Show {
         vec![crate::docs::StdLibFnArg {
             name: "args".to_string(),
             type_: "[number]".to_string(),
-            schema: crate::docs::cleanup_number_tuples_root(
-                generator.root_schema_for::<[f64; 2usize]>(),
-            ),
+            schema: generator.root_schema_for::<[f64; 2usize]>(),
             required: true,
             label_required: true,
             description: String::new().to_string(),
@@ -123,7 +115,7 @@ impl crate::docs::StdLibFn for Show {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        let schema = crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<f64>());
+        let schema = generator.root_schema_for::<f64>();
         Some(crate::docs::StdLibFnArg {
             name: "".to_string(),
             type_: "number".to_string(),

rust/kcl-derive-docs/tests/box.gen

@@ -32,13 +32,7 @@ mod test_examples_show {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_show0() -> miette::Result<()> {
         let code = "This is code.\nIt does other shit.\nshow";
-        let result = match crate::test_server::execute_and_snapshot(
-            code,
-            crate::settings::types::UnitLength::Mm,
-            None,
-        )
-        .await
-        {
+        let result = match crate::test_server::execute_and_snapshot(code, None).await {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,
@@ -109,7 +103,7 @@ impl crate::docs::StdLibFn for Show {
         vec![crate::docs::StdLibFnArg {
             name: "args".to_string(),
             type_: "number".to_string(),
-            schema: crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<f64>()),
+            schema: generator.root_schema_for::<f64>(),
             required: true,
             label_required: true,
             description: String::new().to_string(),
@@ -121,7 +115,7 @@ impl crate::docs::StdLibFn for Show {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        let schema = crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<f64>());
+        let schema = generator.root_schema_for::<f64>();
         Some(crate::docs::StdLibFnArg {
             name: "".to_string(),
             type_: "number".to_string(),

rust/kcl-derive-docs/tests/doc_comment_with_code.gen

@@ -33,13 +33,7 @@ mod test_examples_my_func {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_my_func0() -> miette::Result<()> {
         let code = "This is another code block.\nyes sirrr.\nmyFunc";
-        let result = match crate::test_server::execute_and_snapshot(
-            code,
-            crate::settings::types::UnitLength::Mm,
-            None,
-        )
-        .await
-        {
+        let result = match crate::test_server::execute_and_snapshot(code, None).await {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,
@@ -110,9 +104,7 @@ impl crate::docs::StdLibFn for MyFunc {
         vec![crate::docs::StdLibFnArg {
             name: "args".to_string(),
             type_: "kittycad::types::InputFormat".to_string(),
-            schema: crate::docs::cleanup_number_tuples_root(
-                generator.root_schema_for::<Option<kittycad::types::InputFormat>>(),
-            ),
+            schema: generator.root_schema_for::<Option<kittycad::types::InputFormat>>(),
             required: false,
             label_required: true,
             description: String::new().to_string(),
@@ -124,8 +116,7 @@ impl crate::docs::StdLibFn for MyFunc {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        let schema =
-            crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<Vec<Sketch>>());
+        let schema = generator.root_schema_for::<Vec<Sketch>>();
         Some(crate::docs::StdLibFnArg {
             name: "".to_string(),
             type_: "[Sketch]".to_string(),

rust/kcl-derive-docs/tests/lineTo.gen

@@ -33,13 +33,7 @@ mod test_examples_line_to {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_line_to0() -> miette::Result<()> {
         let code = "This is another code block.\nyes sirrr.\nlineTo";
-        let result = match crate::test_server::execute_and_snapshot(
-            code,
-            crate::settings::types::UnitLength::Mm,
-            None,
-        )
-        .await
-        {
+        let result = match crate::test_server::execute_and_snapshot(code, None).await {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,
@@ -111,9 +105,7 @@ impl crate::docs::StdLibFn for LineTo {
             crate::docs::StdLibFnArg {
                 name: "data".to_string(),
                 type_: "LineToData".to_string(),
-                schema: crate::docs::cleanup_number_tuples_root(
-                    generator.root_schema_for::<LineToData>(),
-                ),
+                schema: generator.root_schema_for::<LineToData>(),
                 required: true,
                 label_required: true,
                 description: String::new().to_string(),
@@ -122,9 +114,7 @@ impl crate::docs::StdLibFn for LineTo {
             crate::docs::StdLibFnArg {
                 name: "sketch".to_string(),
                 type_: "Sketch".to_string(),
-                schema: crate::docs::cleanup_number_tuples_root(
-                    generator.root_schema_for::<Sketch>(),
-                ),
+                schema: generator.root_schema_for::<Sketch>(),
                 required: true,
                 label_required: true,
                 description: "the sketch you're adding the line to".to_string(),
@@ -137,7 +127,7 @@ impl crate::docs::StdLibFn for LineTo {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        let schema = crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<Sketch>());
+        let schema = generator.root_schema_for::<Sketch>();
         Some(crate::docs::StdLibFnArg {
             name: "".to_string(),
             type_: "Sketch".to_string(),

rust/kcl-derive-docs/tests/min.gen

@@ -32,13 +32,7 @@ mod test_examples_min {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_min0() -> miette::Result<()> {
         let code = "This is another code block.\nyes sirrr.\nmin";
-        let result = match crate::test_server::execute_and_snapshot(
-            code,
-            crate::settings::types::UnitLength::Mm,
-            None,
-        )
-        .await
-        {
+        let result = match crate::test_server::execute_and_snapshot(code, None).await {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,
@@ -109,9 +103,7 @@ impl crate::docs::StdLibFn for Min {
         vec![crate::docs::StdLibFnArg {
             name: "args".to_string(),
             type_: "[number]".to_string(),
-            schema: crate::docs::cleanup_number_tuples_root(
-                generator.root_schema_for::<Vec<f64>>(),
-            ),
+            schema: generator.root_schema_for::<Vec<f64>>(),
             required: true,
             label_required: true,
             description: String::new().to_string(),
@@ -123,7 +115,7 @@ impl crate::docs::StdLibFn for Min {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        let schema = crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<f64>());
+        let schema = generator.root_schema_for::<f64>();
         Some(crate::docs::StdLibFnArg {
             name: "".to_string(),
             type_: "number".to_string(),

rust/kcl-derive-docs/tests/option.gen

@@ -32,13 +32,7 @@ mod test_examples_show {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_show0() -> miette::Result<()> {
         let code = "This is code.\nIt does other shit.\nshow";
-        let result = match crate::test_server::execute_and_snapshot(
-            code,
-            crate::settings::types::UnitLength::Mm,
-            None,
-        )
-        .await
-        {
+        let result = match crate::test_server::execute_and_snapshot(code, None).await {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,
@@ -109,9 +103,7 @@ impl crate::docs::StdLibFn for Show {
         vec![crate::docs::StdLibFnArg {
             name: "args".to_string(),
             type_: "number".to_string(),
-            schema: crate::docs::cleanup_number_tuples_root(
-                generator.root_schema_for::<Option<f64>>(),
-            ),
+            schema: generator.root_schema_for::<Option<f64>>(),
             required: false,
             label_required: true,
             description: String::new().to_string(),
@@ -123,7 +115,7 @@ impl crate::docs::StdLibFn for Show {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        let schema = crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<f64>());
+        let schema = generator.root_schema_for::<f64>();
         Some(crate::docs::StdLibFnArg {
             name: "".to_string(),
             type_: "number".to_string(),

rust/kcl-derive-docs/tests/option_input_format.gen

@@ -32,13 +32,7 @@ mod test_examples_import {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_import0() -> miette::Result<()> {
         let code = "This is code.\nIt does other shit.\nimport";
-        let result = match crate::test_server::execute_and_snapshot(
-            code,
-            crate::settings::types::UnitLength::Mm,
-            None,
-        )
-        .await
-        {
+        let result = match crate::test_server::execute_and_snapshot(code, None).await {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,
@@ -109,9 +103,7 @@ impl crate::docs::StdLibFn for Import {
         vec![crate::docs::StdLibFnArg {
             name: "args".to_string(),
             type_: "kittycad::types::InputFormat".to_string(),
-            schema: crate::docs::cleanup_number_tuples_root(
-                generator.root_schema_for::<Option<kittycad::types::InputFormat>>(),
-            ),
+            schema: generator.root_schema_for::<Option<kittycad::types::InputFormat>>(),
             required: false,
             label_required: true,
             description: String::new().to_string(),
@@ -123,7 +115,7 @@ impl crate::docs::StdLibFn for Import {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        let schema = crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<f64>());
+        let schema = generator.root_schema_for::<f64>();
         Some(crate::docs::StdLibFnArg {
             name: "".to_string(),
             type_: "number".to_string(),

rust/kcl-derive-docs/tests/return_vec_box_sketch.gen

@@ -32,13 +32,7 @@ mod test_examples_import {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_import0() -> miette::Result<()> {
         let code = "This is code.\nIt does other shit.\nimport";
-        let result = match crate::test_server::execute_and_snapshot(
-            code,
-            crate::settings::types::UnitLength::Mm,
-            None,
-        )
-        .await
-        {
+        let result = match crate::test_server::execute_and_snapshot(code, None).await {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,
@@ -109,9 +103,7 @@ impl crate::docs::StdLibFn for Import {
         vec![crate::docs::StdLibFnArg {
             name: "args".to_string(),
             type_: "kittycad::types::InputFormat".to_string(),
-            schema: crate::docs::cleanup_number_tuples_root(
-                generator.root_schema_for::<Option<kittycad::types::InputFormat>>(),
-            ),
+            schema: generator.root_schema_for::<Option<kittycad::types::InputFormat>>(),
             required: false,
             label_required: true,
             description: String::new().to_string(),
@@ -123,8 +115,7 @@ impl crate::docs::StdLibFn for Import {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        let schema =
-            crate::docs::cleanup_number_tuples_root(generator.root_schema_for::<Vec<Sketch>>());
+        let schema = generator.root_schema_for::<Vec<Sketch>>();
         Some(crate::docs::StdLibFnArg {
             name: "".to_string(),
             type_: "[Sketch]".to_string(),