Retry when the server flakes on us

This isn't ideal, and I'd love to remove this eventually; but this is
helpful when we exhaust the Engine pool, or when running locally. This
will retry a few times, and only fail if there's a few repeated
failures.

Since the WebSocket fully handshakes, and then fails after handshake
(when api-deux realizes we're out of Engines, specifically), I can't
check the HTTP code directly where I wanted to.

This is kludgey for now, and it may mask flaky endpoints; but it may be
worth it in the short-term. I'd love to find a way for the modeling
endpoint to not upgrade via api-deux unless there's an engine for it
long-er term.

.codespellrc

@@ -1,3 +1,3 @@
 [codespell]
-ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,absolutey,atleast
-skip: **/target,node_modules,build,**/Cargo.lock,./docs/kcl/*.md,./src-tauri/gen/schemas
+ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,absolutey
+skip: **/target,node_modules,build,**/Cargo.lock

.github/dependabot.yml

@@ -9,27 +9,15 @@ updates:
       directory: '/' # Location of package manifests
       schedule:
           interval: 'daily'
-      reviewers:
-          - franknoirot 
-          - irev-dev
     - package-ecosystem: 'github-actions' # See documentation for possible values
       directory: '/' # Location of package manifests
       schedule:
           interval: 'daily'
-      reviewers:
-          - adamchalmers
-          - jessfraz
     - package-ecosystem: 'cargo' # See documentation for possible values
       directory: '/src/wasm-lib/' # Location of package manifests
       schedule:
           interval: 'daily'
-      reviewers:
-          - adamchalmers
-          - jessfraz
     - package-ecosystem: 'cargo' # See documentation for possible values
       directory: '/src-tauri/' # Location of package manifests
       schedule:
           interval: 'daily'
-      reviewers:
-          - adamchalmers
-          - jessfraz

.github/workflows/cargo-criterion.yml

@@ -7,23 +7,23 @@ on:
       - '**/Cargo.toml'
       - '**/Cargo.lock'
       - '**/rust-toolchain.toml'
-      - .github/workflows/cargo-bench.yml
+      - .github/workflows/cargo-criterion.yml
   pull_request:
     paths:
       - '**.rs'
       - '**/Cargo.toml'
       - '**/Cargo.lock'
       - '**/rust-toolchain.toml'
-      - .github/workflows/cargo-bench.yml
+      - .github/workflows/cargo-criterion.yml
   workflow_dispatch:
 permissions: read-all
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
-name: cargo bench
+name: cargo criterion
 jobs:
-  cargo-bench:
-    name: Benchmark with iai
+  cargocriterion:
+    name: cargo criterion
     runs-on: ubuntu-latest-8-cores
     steps:
       - uses: actions/checkout@v4
@@ -31,12 +31,10 @@ jobs:
       - name: Install dependencies
         run: |
           cargo install cargo-criterion
-          sudo apt update
-          sudo apt install -y valgrind
       - name: Rust Cache
         uses: Swatinem/rust-cache@v2.6.1
       - name: Benchmark kcl library
         shell: bash
         run: |-
-          cd src/wasm-lib/kcl; cargo bench -- iai
+          cd src/wasm-lib/kcl; cargo criterion
 

.github/workflows/ci.yml

@@ -104,11 +104,7 @@ jobs:
         run: |
           VERSION=$(date +'%-y.%-m.%-d') yarn bump-jsons
           echo "$(jq --arg url 'https://dl.zoo.dev/releases/modeling-app/nightly/last_update.json' \
-            '.plugins.updater.endpoints[]=$url' src-tauri/tauri.release.conf.json --indent 2)" > src-tauri/tauri.release.conf.json
-          echo "$(jq --arg id 'dev.zoo.modeling-app-nightly' \
-            '.identifier=$id' src-tauri/tauri.release.conf.json --indent 2)" > src-tauri/tauri.release.conf.json
-          echo "$(jq --arg name 'Zoo Modeling App (Nightly)' \
-            '.productName=$name' src-tauri/tauri.release.conf.json --indent 2)" > src-tauri/tauri.release.conf.json
+            '.tauri.updater.endpoints[]=$url' src-tauri/tauri.release.conf.json --indent 2)" > src-tauri/tauri.release.conf.json
 
       - uses: actions/upload-artifact@v3
         if: github.event_name == 'schedule'
@@ -129,9 +125,6 @@ jobs:
       fail-fast: false
       matrix:
         os: [macos-14, ubuntu-latest, windows-latest]
-    env:
-      TAURI_ARGS_MACOS: ${{ matrix.os == 'macos-14' && '--target universal-apple-darwin' || '' }}
-      TAURI_ARGS_UBUNTU: ${{ matrix.os == 'ubuntu-latest' && '--bundles' || '' }}
     steps:
       - uses: actions/checkout@v4
 
@@ -151,12 +144,10 @@ jobs:
           sudo apt-get update &&
           sudo apt-get install -y
           libgtk-3-dev
-          libayatana-appindicator3-dev
+          libgtksourceview-3.0-dev
+          webkit2gtk-4.0
+          libappindicator3-dev
           webkit2gtk-driver
-          libsoup-3.0-dev
-          libjavascriptcoregtk-4.1-dev
-          libwebkit2gtk-4.1-dev
-          at-spi2-core
           xvfb
 
       - name: Sync node version and setup cache
@@ -170,9 +161,7 @@ jobs:
       - name: Setup Rust
         uses: dtolnay/rust-toolchain@stable
 
-      # TODO: re-enable for Windows builds, see https://github.com/tauri-apps/tauri/issues/9045
       - name: Setup Rust cache
-        if: matrix.os != 'windows-latest'
         uses: swatinem/rust-cache@v2
         with:
           workspaces: './src-tauri -> target'
@@ -235,14 +224,14 @@ jobs:
         with:
           includeRelease: false
           includeDebug: true
-          args: "${{ env.TAURI_ARGS_MACOS }} ${{ env.TAURI_ARGS_UBUNTU }}"
+          args: ${{ matrix.os == 'macos-14' && '--target universal-apple-darwin' || '' }}
 
       - name: Build the app (release) and sign
         uses: tauri-apps/tauri-action@v0
         if: ${{ env.BUILD_RELEASE == 'true' }}
         env:
-          TAURI_SIGNING_PRIVATE_KEY: ${{ secrets.TAURI_SIGNING_PRIVATE_KEY }}
-          TAURI_SIGNING_PRIVATE_KEY_PASSWORD: ${{ secrets.TAURI_SIGNING_PRIVATE_KEY_PASSWORD }}
+          TAURI_PRIVATE_KEY: ${{ secrets.TAURI_PRIVATE_KEY }}
+          TAURI_KEY_PASSWORD: ${{ secrets.TAURI_KEY_PASSWORD }}
           APPLE_CERTIFICATE: ${{ secrets.APPLE_CERTIFICATE }}
           APPLE_CERTIFICATE_PASSWORD: ${{ secrets.APPLE_CERTIFICATE_PASSWORD }}
           APPLE_SIGNING_IDENTITY: ${{ secrets.APPLE_SIGNING_IDENTITY }}
@@ -251,7 +240,7 @@ jobs:
           APPLE_TEAM_ID: ${{ secrets.APPLE_TEAM_ID }}
           TAURI_CONF_ARGS: "--config ${{ matrix.os == 'windows-latest' && 'src-tauri\\tauri.release.conf.json' || 'src-tauri/tauri.release.conf.json' }}"
         with:
-          args: "${{ env.TAURI_CONF_ARGS }} ${{ env.TAURI_ARGS_MACOS }} ${{ env.TAURI_ARGS_UBUNTU }}"
+          args: "${{ matrix.os == 'macos-14' && '--target universal-apple-darwin' || '' }} ${{ env.TAURI_CONF_ARGS }}"
 
       - uses: actions/upload-artifact@v3
         if: matrix.os != 'ubuntu-latest'
@@ -261,11 +250,10 @@ jobs:
         with:
           path: "${{ env.PREFIX }}/${{ env.MODE }}/bundle/*/*"
 
-      # TODO: re-enable linux e2e tests when possible
       - name: Run e2e tests (linux only)
-        if: false
+        if: matrix.os == 'ubuntu-latest'
         run: |
-          cargo install tauri-driver
+          cargo install tauri-driver@0.1.3
           source .env.${{ env.BUILD_RELEASE == 'true' && 'production' || 'development' }}
           export VITE_KC_API_BASE_URL
           xvfb-run yarn test:e2e:tauri
@@ -285,7 +273,6 @@ jobs:
       NOTES: ${{ github.event_name == 'release' && github.event.release.body || format('Nightly build, commit {0}', github.sha) }}
       BUCKET_DIR: ${{ github.event_name == 'release' && 'dl.kittycad.io/releases/modeling-app' || 'dl.kittycad.io/releases/modeling-app/nightly' }}
       WEBSITE_DIR: ${{ github.event_name == 'release' && 'dl.zoo.dev/releases/modeling-app' || 'dl.zoo.dev/releases/modeling-app/nightly' }}
-      URL_CODED_NAME: ${{ github.event_name == 'schedule' && 'Zoo%20Modeling%20App%20%28Nightly%29' || 'Zoo%20Modeling%20App' }}
     steps:
       - uses: actions/download-artifact@v3
 
@@ -300,9 +287,9 @@ jobs:
             --arg pub_date "${PUB_DATE}" \
             --arg notes "${NOTES}" \
             --arg darwin_sig "$DARWIN_SIG" \
-            --arg darwin_url "$RELEASE_DIR/macos/${{ env.URL_CODED_NAME }}.app.tar.gz" \
+            --arg darwin_url "$RELEASE_DIR/macos/Zoo%20Modeling%20App.app.tar.gz" \
             --arg windows_sig "$WINDOWS_SIG" \
-            --arg windows_url "$RELEASE_DIR/msi/${{ env.URL_CODED_NAME }}_${VERSION_NO_V}_x64_en-US.msi.zip" \
+            --arg windows_url "$RELEASE_DIR/msi/Zoo%20Modeling%20App_${VERSION_NO_V}_x64_en-US.msi.zip" \
             '{
               "version": $version,
               "pub_date": $pub_date,
@@ -331,8 +318,8 @@ jobs:
             --arg version "${VERSION}" \
             --arg pub_date "${PUB_DATE}" \
             --arg notes "${NOTES}" \
-            --arg darwin_url "$RELEASE_DIR/dmg/${{ env.URL_CODED_NAME }}_${VERSION_NO_V}_universal.dmg" \
-            --arg windows_url "$RELEASE_DIR/msi/${{ env.URL_CODED_NAME }}_${VERSION_NO_V}_x64_en-US.msi" \
+            --arg darwin_url "$RELEASE_DIR/dmg/Zoo%20Modeling%20App_${VERSION_NO_V}_universal.dmg" \
+            --arg windows_url "$RELEASE_DIR/msi/Zoo%20Modeling%20App_${VERSION_NO_V}_x64_en-US.msi" \
             '{
               "version": $version,
               "pub_date": $pub_date,

.github/workflows/generate-website-docs.yml

@@ -15,7 +15,7 @@ concurrency:
   cancel-in-progress: true
 jobs:
   generate-website-docs:
-    name: generate-website-docs
+    name: generate-website-docs 
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
@@ -56,9 +56,6 @@ jobs:
           gh pr create --title "Update KCL docs" \
               --body "Updating the generated kcl docs cc @jessfraz @franknoirot merge this" \
               --head "$NEW_BRANCH" \
-              --reviewer jessfraz \
-              --reviewer irev-dev \
-              --reviewer franknoirot \
               --base main || true
         env:
           GITHUB_TOKEN: ${{ steps.app-token.outputs.token }}

.gitignore

@@ -51,6 +51,5 @@ e2e/playwright/export-snapshots/*
 
 ## generated files
 src/**/*.typegen.ts
-src-tauri/gen
 
 src/wasm-lib/grackle/stdlib_cube_partial.json

README.md

@@ -281,7 +281,7 @@ https://github.com/KittyCAD/modeling-app/assets/29681384/6f5e8e85-1003-4fd9-be7f
 <details>
 
 <summary>
-PS: for the debug panel, the following JSON is useful for snapping the camera
+Ps for the debug panel, the following JSON is useful for snapping the camera
 </summary>
 
 ```JSON

docs/kcl/abs.md

@@ -12,10 +12,6 @@ Computes the absolute value of a number.
 abs(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/acos.md

@@ -12,10 +12,6 @@ Computes the arccosine of a number (in radians).
 acos(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/asin.md

@@ -12,10 +12,6 @@ Computes the arcsine of a number (in radians).
 asin(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/atan.md

@@ -12,10 +12,6 @@ Computes the arctangent of a number (in radians).
 atan(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/ceil.md

@@ -12,10 +12,6 @@ Computes the smallest integer greater than or equal to a number.
 ceil(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/cos.md

@@ -1,10 +1,10 @@
 ---
 title: "cos"
-excerpt: "Computes the cosine of a number (in radians)."
+excerpt: "Computes the sine of a number (in radians)."
 layout: manual
 ---
 
-Computes the cosine of a number (in radians).
+Computes the sine of a number (in radians).
 
 
 
@@ -12,10 +12,6 @@ Computes the cosine of a number (in radians).
 cos(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/e.md

@@ -12,10 +12,6 @@ Return the value of Euler’s number `e`.
 e() -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/floor.md

@@ -12,10 +12,6 @@ Computes the largest integer less than or equal to a number.
 floor(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/index.md

@@ -30,7 +30,6 @@ layout: manual
 * [`extrude`](kcl/extrude)
 * [`fillet`](kcl/fillet)
 * [`floor`](kcl/floor)
-* [`getEdge`](kcl/getEdge)
 * [`getExtrudeWallTransform`](kcl/getExtrudeWallTransform)
 * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
 * [`getOppositeEdge`](kcl/getOppositeEdge)
@@ -57,7 +56,6 @@ layout: manual
 * [`patternLinear3d`](kcl/patternLinear3d)
 * [`pi`](kcl/pi)
 * [`pow`](kcl/pow)
-* [`revolve`](kcl/revolve)
 * [`segAng`](kcl/segAng)
 * [`segEndX`](kcl/segEndX)
 * [`segEndY`](kcl/segEndY)

docs/kcl/legAngX.md

@@ -12,10 +12,6 @@ Returns the angle of the given leg for x.
 legAngX(hypotenuse: number, leg: number) -> number
 ```
 
-### Tags
-
-* `utilities`
-
 ### Examples
 
 ```js

docs/kcl/legAngY.md

@@ -12,10 +12,6 @@ Returns the angle of the given leg for y.
 legAngY(hypotenuse: number, leg: number) -> number
 ```
 
-### Tags
-
-* `utilities`
-
 ### Examples
 
 ```js

docs/kcl/legLen.md

@@ -12,10 +12,6 @@ Returns the length of the given leg.
 legLen(hypotenuse: number, leg: number) -> number
 ```
 
-### Tags
-
-* `utilities`
-
 ### Examples
 
 ```js

docs/kcl/ln.md

@@ -12,10 +12,6 @@ Computes the natural logarithm of the number.
 ln(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/log.md

@@ -12,10 +12,6 @@ The result might not be correctly rounded owing to implementation details; `log2
 log(num: number, base: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/log10.md

@@ -12,10 +12,6 @@ Computes the base 10 logarithm of the number.
 log10(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/log2.md

@@ -12,10 +12,6 @@ Computes the base 2 logarithm of the number.
 log2(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/max.md

@@ -12,10 +12,6 @@ Computes the maximum of the given arguments.
 max(args: [number]) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/min.md

@@ -12,10 +12,6 @@ Computes the minimum of the given arguments.
 min(args: [number]) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/pi.md

@@ -12,10 +12,6 @@ Return the value of `pi`. Archimedes’ constant (π).
 pi() -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/pow.md

@@ -12,10 +12,6 @@ Computes the number to a power.
 pow(num: number, pow: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/sin.md

@@ -12,10 +12,6 @@ Computes the sine of a number (in radians).
 sin(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/sqrt.md

@@ -12,10 +12,6 @@ Computes the square root of a number.
 sqrt(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/tan.md

@@ -12,10 +12,6 @@ Computes the tangent of a number (in radians).
 tan(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/tau.md

@@ -12,10 +12,6 @@ Return the value of `tau`. The full circle constant (τ). Equal to 2π.
 tau() -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/toDegrees.md

@@ -12,10 +12,6 @@ Converts a number from radians to degrees.
 toDegrees(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

docs/kcl/toRadians.md

@@ -12,10 +12,6 @@ Converts a number from degrees to radians.
 toRadians(num: number) -> number
 ```
 
-### Tags
-
-* `math`
-
 ### Examples
 
 ```js

e2e/playwright/snapshot-tests.spec.ts

@@ -7,36 +7,28 @@ import { spawn } from 'child_process'
 import { APP_NAME } from 'lib/constants'
 import JSZip from 'jszip'
 import path from 'path'
-import { TEST_SETTINGS, TEST_SETTINGS_KEY } from './storageStates'
-import * as TOML from '@iarna/toml'
 
-test.beforeEach(async ({ page }) => {
+test.beforeEach(async ({ context, page }) => {
+  await context.addInitScript(async (token) => {
+    localStorage.setItem('TOKEN_PERSIST_KEY', token)
+    localStorage.setItem('persistCode', ``)
+    localStorage.setItem(
+      'SETTINGS_PERSIST_KEY',
+      JSON.stringify({
+        baseUnit: 'in',
+        cameraControls: 'KittyCAD',
+        defaultDirectory: '',
+        defaultProjectName: 'project-$nnn',
+        onboardingStatus: 'dismissed',
+        showDebugPanel: true,
+        textWrapping: 'On',
+        theme: 'dark',
+        unitSystem: 'imperial',
+      })
+    )
+  }, secrets.token)
   // reducedMotion kills animations, which speeds up tests and reduces flakiness
   await page.emulateMedia({ reducedMotion: 'reduce' })
-
-  // set the default settings
-  await page.addInitScript(
-    async ({ token, settingsKey, settings }) => {
-      localStorage.setItem('TOKEN_PERSIST_KEY', token)
-      localStorage.setItem('persistCode', ``)
-      localStorage.setItem(settingsKey, settings)
-    },
-    {
-      token: secrets.token,
-      settingsKey: TEST_SETTINGS_KEY,
-      settings: TOML.stringify({ settings: TEST_SETTINGS }),
-    }
-  )
-
-  // Make the user avatar image always 404
-  // so we see the fallback menu icon for all snapshot tests
-  await page.route('https://lh3.googleusercontent.com/**', async (route) => {
-    await route.fulfill({
-      status: 404,
-      contentType: 'text/plain',
-      body: 'Not Found!',
-    })
-  })
 })
 
 test.setTimeout(60_000)
@@ -336,7 +328,64 @@ const part001 = startSketchOn('-XZ')
   }
 })
 
-const extrudeDefaultPlane = async (context: any, page: any, plane: string) => {
+test('extrude on each default plane should be stable', async ({
+  page,
+  context,
+}) => {
+  const u = getUtils(page)
+  const makeCode = (plane = 'XY') => `const part001 = startSketchOn('${plane}')
+  |> startProfileAt([7.00, 4.40], %)
+  |> line([6.60, -0.20], %)
+  |> line([2.80, 5.00], %)
+  |> line([-5.60, 4.40], %)
+  |> line([-5.40, -3.80], %)
+  |> close(%)
+  |> extrude(10.00, %)
+`
+  await context.addInitScript(async (code) => {
+    localStorage.setItem('persistCode', code)
+  }, makeCode('XY'))
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+
+  // wait for execution done
+  await u.openDebugPanel()
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+  await u.clearAndCloseDebugPanel()
+
+  await page.getByText('Code').click()
+  await expect(page).toHaveScreenshot({
+    maxDiffPixels: 100,
+  })
+  await page.getByText('Code').click()
+
+  const runSnapshotsForOtherPlanes = async (plane = 'XY') => {
+    // clear code
+    await u.removeCurrentCode()
+    // add makeCode('XZ')
+    await page.locator('.cm-content').fill(makeCode(plane))
+    // wait for execution done
+    await u.openDebugPanel()
+    await u.expectCmdLog('[data-message-type="execution-done"]')
+    await u.clearAndCloseDebugPanel()
+
+    await page.getByText('Code').click()
+    await expect(page).toHaveScreenshot({
+      maxDiffPixels: 100,
+    })
+    await page.getByText('Code').click()
+  }
+  await runSnapshotsForOtherPlanes('-XY')
+
+  await runSnapshotsForOtherPlanes('XZ')
+  await runSnapshotsForOtherPlanes('-XZ')
+
+  await runSnapshotsForOtherPlanes('YZ')
+  await runSnapshotsForOtherPlanes('-YZ')
+})
+
+test('Draft segments should look right', async ({ page, context }) => {
   await context.addInitScript(async () => {
     localStorage.setItem(
       'SETTINGS_PERSIST_KEY',
@@ -353,75 +402,6 @@ const extrudeDefaultPlane = async (context: any, page: any, plane: string) => {
       })
     )
   })
-
-  const code = `const part001 = startSketchOn('${plane}')
-  |> startProfileAt([7.00, 4.40], %)
-  |> line([6.60, -0.20], %)
-  |> line([2.80, 5.00], %)
-  |> line([-5.60, 4.40], %)
-  |> line([-5.40, -3.80], %)
-  |> close(%)
-  |> extrude(10.00, %)
-`
-  await page.addInitScript(async (code: string) => {
-    localStorage.setItem('persistCode', code)
-  })
-
-  const u = getUtils(page)
-  await page.setViewportSize({ width: 1200, height: 500 })
-  await page.goto('/')
-  await u.waitForAuthSkipAppStart()
-
-  // wait for execution done
-  await u.openDebugPanel()
-  await u.expectCmdLog('[data-message-type="execution-done"]')
-  await u.clearAndCloseDebugPanel()
-  await page.waitForTimeout(200)
-  // clear code
-  await u.removeCurrentCode()
-  await u.openAndClearDebugPanel()
-  await u.doAndWaitForImageDiff(
-    () => page.locator('.cm-content').fill(code),
-    200
-  )
-  // wait for execution done
-  await u.expectCmdLog('[data-message-type="execution-done"]')
-  await u.clearAndCloseDebugPanel()
-
-  await u.closeKclCodePanel()
-  await expect(page).toHaveScreenshot({
-    maxDiffPixels: 100,
-  })
-  await u.openKclCodePanel()
-}
-
-test.describe('extrude on default planes should be stable', () => {
-  test('XY', async ({ page, context }) => {
-    await extrudeDefaultPlane(context, page, 'XY')
-  })
-
-  test('XZ', async ({ page, context }) => {
-    await extrudeDefaultPlane(context, page, 'XZ')
-  })
-
-  test('YZ', async ({ page, context }) => {
-    await extrudeDefaultPlane(context, page, 'YZ')
-  })
-
-  test('-XY', async ({ page, context }) => {
-    await extrudeDefaultPlane(context, page, '-XY')
-  })
-
-  test('-XZ', async ({ page, context }) => {
-    await extrudeDefaultPlane(context, page, '-XZ')
-  })
-
-  test('-YZ', async ({ page, context }) => {
-    await extrudeDefaultPlane(context, page, '-YZ')
-  })
-})
-
-test('Draft segments should look right', async ({ page, context }) => {
   const u = getUtils(page)
   await page.setViewportSize({ width: 1200, height: 500 })
   const PUR = 400 / 37.5 //pixeltoUnitRatio
@@ -480,7 +460,26 @@ test('Draft segments should look right', async ({ page, context }) => {
   })
 })
 
-test('Draft rectangles should look right', async ({ page, context }) => {
+test('Client side scene scale should match engine scale inch', async ({
+  page,
+  context,
+}) => {
+  await context.addInitScript(async () => {
+    localStorage.setItem(
+      'SETTINGS_PERSIST_KEY',
+      JSON.stringify({
+        baseUnit: 'in',
+        cameraControls: 'KittyCAD',
+        defaultDirectory: '',
+        defaultProjectName: 'project-$nnn',
+        onboardingStatus: 'dismissed',
+        showDebugPanel: true,
+        textWrapping: 'On',
+        theme: 'dark',
+        unitSystem: 'imperial',
+      })
+    )
+  })
   const u = getUtils(page)
   await page.setViewportSize({ width: 1200, height: 500 })
   const PUR = 400 / 37.5 //pixeltoUnitRatio
@@ -508,205 +507,155 @@ test('Draft rectangles should look right', async ({ page, context }) => {
   )
 
   await page.waitForTimeout(300) // TODO detect animation ending, or disable animation
-  await u.closeDebugPanel()
 
   const startXPx = 600
+  await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
+  await expect(page.locator('.cm-content'))
+    .toHaveText(`const part001 = startSketchOn('-XZ')
+|> startProfileAt([9.06, -12.22], %)`)
+  await page.waitForTimeout(100)
 
-  // Equip the rectangle tool
-  await page.getByRole('button', { name: 'Line' }).click()
-  await page.getByRole('button', { name: 'Rectangle' }).click()
+  await u.closeDebugPanel()
 
-  // Draw the rectangle
-  await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 30)
-  await page.mouse.move(startXPx + PUR * 10, 500 - PUR * 10, { steps: 5 })
+  await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
+  await page.waitForTimeout(100)
 
-  // Ensure the draft rectangle looks the same as it usually does
+  await expect(page.locator('.cm-content'))
+    .toHaveText(`const part001 = startSketchOn('-XZ')
+|> startProfileAt([9.06, -12.22], %)
+|> line([9.14, 0], %)`)
+
+  await page.getByRole('button', { name: 'Tangential Arc' }).click()
+  await page.waitForTimeout(100)
+
+  await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
+
+  await expect(page.locator('.cm-content'))
+    .toHaveText(`const part001 = startSketchOn('-XZ')
+|> startProfileAt([9.06, -12.22], %)
+|> line([9.14, 0], %)
+|> tangentialArcTo([27.34, -3.08], %)`)
+
+  // click tangential arc tool again to unequip it
+  await page.getByRole('button', { name: 'Tangential Arc' }).click()
+  await page.waitForTimeout(100)
+
+  // screen shot should show the sketch
+  await expect(page).toHaveScreenshot({
+    maxDiffPixels: 100,
+  })
+
+  // exit sketch
+  await u.openAndClearDebugPanel()
+  await page.getByRole('button', { name: 'Exit Sketch' }).click()
+
+  // wait for execution done
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+  await u.clearAndCloseDebugPanel()
+  await page.waitForTimeout(200)
+
+  // second screen shot should look almost identical, i.e. scale should be the same.
   await expect(page).toHaveScreenshot({
     maxDiffPixels: 100,
   })
 })
 
-test.describe('Client side scene scale should match engine scale', () => {
-  test('Inch scale', async ({ page }) => {
-    const u = getUtils(page)
-    await page.setViewportSize({ width: 1200, height: 500 })
-    const PUR = 400 / 37.5 //pixeltoUnitRatio
-    await page.goto('/')
-    await u.waitForAuthSkipAppStart()
-    await u.openDebugPanel()
-
-    await expect(
-      page.getByRole('button', { name: 'Start Sketch' })
-    ).not.toBeDisabled()
-    await expect(
-      page.getByRole('button', { name: 'Start Sketch' })
-    ).toBeVisible()
-
-    // click on "Start Sketch" button
-    await u.clearCommandLogs()
-    await u.doAndWaitForImageDiff(
-      () => page.getByRole('button', { name: 'Start Sketch' }).click(),
-      200
+test('Client side scene scale should match engine scale mm', async ({
+  page,
+  context,
+}) => {
+  await context.addInitScript(async () => {
+    localStorage.setItem(
+      'SETTINGS_PERSIST_KEY',
+      JSON.stringify({
+        baseUnit: 'mm',
+        cameraControls: 'KittyCAD',
+        defaultDirectory: '',
+        defaultProjectName: 'project-$nnn',
+        onboardingStatus: 'dismissed',
+        showDebugPanel: true,
+        textWrapping: 'On',
+        theme: 'dark',
+        unitSystem: 'metric',
+      })
     )
+  })
+  const u = getUtils(page)
+  await page.setViewportSize({ width: 1200, height: 500 })
+  const PUR = 400 / 37.5 //pixeltoUnitRatio
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await u.openDebugPanel()
 
-    // select a plane
-    await page.mouse.click(700, 200)
+  await expect(
+    page.getByRole('button', { name: 'Start Sketch' })
+  ).not.toBeDisabled()
+  await expect(page.getByRole('button', { name: 'Start Sketch' })).toBeVisible()
 
-    await expect(page.locator('.cm-content')).toHaveText(
-      `const part001 = startSketchOn('-XZ')`
-    )
+  // click on "Start Sketch" button
+  await u.clearCommandLogs()
+  await u.doAndWaitForImageDiff(
+    () => page.getByRole('button', { name: 'Start Sketch' }).click(),
+    200
+  )
 
-    await page.waitForTimeout(300) // TODO detect animation ending, or disable animation
+  // select a plane
+  await page.mouse.click(700, 200)
 
-    const startXPx = 600
-    await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`const part001 = startSketchOn('-XZ')
-    |> startProfileAt([9.06, -12.22], %)`)
-    await page.waitForTimeout(100)
+  await expect(page.locator('.cm-content')).toHaveText(
+    `const part001 = startSketchOn('-XZ')`
+  )
 
-    await u.closeDebugPanel()
+  await page.waitForTimeout(300) // TODO detect animation ending, or disable animation
 
-    await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
-    await page.waitForTimeout(100)
+  const startXPx = 600
+  await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
+  await expect(page.locator('.cm-content'))
+    .toHaveText(`const part001 = startSketchOn('-XZ')
+  |> startProfileAt([230.03, -310.32], %)`)
+  await page.waitForTimeout(100)
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`const part001 = startSketchOn('-XZ')
-    |> startProfileAt([9.06, -12.22], %)
-    |> line([9.14, 0], %)`)
+  await u.closeDebugPanel()
 
-    await page.getByRole('button', { name: 'Tangential Arc' }).click()
-    await page.waitForTimeout(100)
+  await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
+  await page.waitForTimeout(100)
 
-    await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
+  await expect(page.locator('.cm-content'))
+    .toHaveText(`const part001 = startSketchOn('-XZ')
+  |> startProfileAt([230.03, -310.32], %)
+  |> line([232.2, 0], %)`)
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`const part001 = startSketchOn('-XZ')
-    |> startProfileAt([9.06, -12.22], %)
-    |> line([9.14, 0], %)
-    |> tangentialArcTo([27.34, -3.08], %)`)
+  await page.getByRole('button', { name: 'Tangential Arc' }).click()
+  await page.waitForTimeout(100)
 
-    // click tangential arc tool again to unequip it
-    await page.getByRole('button', { name: 'Tangential Arc' }).click()
-    await page.waitForTimeout(100)
+  await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
 
-    // screen shot should show the sketch
-    await expect(page).toHaveScreenshot({
-      maxDiffPixels: 100,
-    })
+  await expect(page.locator('.cm-content'))
+    .toHaveText(`const part001 = startSketchOn('-XZ')
+  |> startProfileAt([230.03, -310.32], %)
+  |> line([232.2, 0], %)
+  |> tangentialArcTo([694.43, -78.12], %)`)
 
-    // exit sketch
-    await u.openAndClearDebugPanel()
-    await page.getByRole('button', { name: 'Exit Sketch' }).click()
+  await page.getByRole('button', { name: 'Tangential Arc' }).click()
+  await page.waitForTimeout(100)
 
-    // wait for execution done
-    await u.expectCmdLog('[data-message-type="execution-done"]')
-    await u.clearAndCloseDebugPanel()
-    await page.waitForTimeout(200)
-
-    // second screen shot should look almost identical, i.e. scale should be the same.
-    await expect(page).toHaveScreenshot({
-      maxDiffPixels: 100,
-    })
+  // screen shot should show the sketch
+  await expect(page).toHaveScreenshot({
+    maxDiffPixels: 100,
   })
 
-  test('Millimeter scale', async ({ page }) => {
-    await page.addInitScript(
-      async ({ settingsKey, settings }) => {
-        localStorage.setItem(settingsKey, settings)
-      },
-      {
-        settingsKey: TEST_SETTINGS_KEY,
-        settings: TOML.stringify({
-          settings: {
-            ...TEST_SETTINGS,
-            modeling: {
-              ...TEST_SETTINGS.modeling,
-              defaultUnit: 'mm',
-            },
-          },
-        }),
-      }
-    )
-    const u = getUtils(page)
-    await page.setViewportSize({ width: 1200, height: 500 })
-    const PUR = 400 / 37.5 //pixeltoUnitRatio
-    await page.goto('/')
-    await u.waitForAuthSkipAppStart()
-    await u.openDebugPanel()
+  // exit sketch
+  await u.openAndClearDebugPanel()
+  await page.getByRole('button', { name: 'Exit Sketch' }).click()
 
-    await expect(
-      page.getByRole('button', { name: 'Start Sketch' })
-    ).not.toBeDisabled()
-    await expect(
-      page.getByRole('button', { name: 'Start Sketch' })
-    ).toBeVisible()
+  // wait for execution done
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+  await u.clearAndCloseDebugPanel()
+  await page.waitForTimeout(200)
 
-    // click on "Start Sketch" button
-    await u.clearCommandLogs()
-    await u.doAndWaitForImageDiff(
-      () => page.getByRole('button', { name: 'Start Sketch' }).click(),
-      200
-    )
-
-    // select a plane
-    await page.mouse.click(700, 200)
-
-    await expect(page.locator('.cm-content')).toHaveText(
-      `const part001 = startSketchOn('-XZ')`
-    )
-
-    await page.waitForTimeout(300) // TODO detect animation ending, or disable animation
-
-    const startXPx = 600
-    await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`const part001 = startSketchOn('-XZ')
-      |> startProfileAt([230.03, -310.32], %)`)
-    await page.waitForTimeout(100)
-
-    await u.closeDebugPanel()
-
-    await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
-    await page.waitForTimeout(100)
-
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`const part001 = startSketchOn('-XZ')
-      |> startProfileAt([230.03, -310.32], %)
-      |> line([232.2, 0], %)`)
-
-    await page.getByRole('button', { name: 'Tangential Arc' }).click()
-    await page.waitForTimeout(100)
-
-    await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
-
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`const part001 = startSketchOn('-XZ')
-      |> startProfileAt([230.03, -310.32], %)
-      |> line([232.2, 0], %)
-      |> tangentialArcTo([694.43, -78.12], %)`)
-
-    await page.getByRole('button', { name: 'Tangential Arc' }).click()
-    await page.waitForTimeout(100)
-
-    // screen shot should show the sketch
-    await expect(page).toHaveScreenshot({
-      maxDiffPixels: 100,
-    })
-
-    // exit sketch
-    await u.openAndClearDebugPanel()
-    await page.getByRole('button', { name: 'Exit Sketch' }).click()
-
-    // wait for execution done
-    await u.expectCmdLog('[data-message-type="execution-done"]')
-    await u.clearAndCloseDebugPanel()
-    await page.waitForTimeout(200)
-
-    // second screen shot should look almost identical, i.e. scale should be the same.
-    await expect(page).toHaveScreenshot({
-      maxDiffPixels: 100,
-    })
+  // second screen shot should look almost identical, i.e. scale should be the same.
+  await expect(page).toHaveScreenshot({
+    maxDiffPixels: 100,
   })
 })
 
@@ -717,14 +666,14 @@ test('Sketch on face with none z-up', async ({ page, context }) => {
       'persistCode',
       `const part001 = startSketchOn('-XZ')
   |> startProfileAt([1.4, 2.47], %)
-  |> line([9.31, 10.55], %, 'seg01')
+  |> line({ to: [9.31, 10.55], tag: 'seg01' }, %)
   |> line([11.91, -10.42], %)
   |> close(%)
   |> extrude(5 + 7, %)
 const part002 = startSketchOn(part001, 'seg01')
-  |> startProfileAt([8, 8], %)
+  |> startProfileAt([-2.89, 1.82], %)
   |> line([4.68, 3.05], %)
-  |> line([0, -7.79], %, 'seg02')
+  |> line({ to: [0, -7.79], tag: 'seg02' }, %)
   |> close(%)
   |> extrude(5 + 7, %)
 `
@@ -734,19 +683,6 @@ const part002 = startSketchOn(part001, 'seg01')
   await page.setViewportSize({ width: 1200, height: 500 })
   await page.goto('/')
   await u.waitForAuthSkipAppStart()
-
-  await u.openDebugPanel()
-  // wait for execution done
-  await expect(
-    page.locator('[data-message-type="execution-done"]')
-  ).toHaveCount(2)
-  await u.closeDebugPanel()
-
-  // Wait for the second extrusion to appear
-  // TODO: Find a way to truly know that the objects have finished
-  // rendering, because an execution-done message is not sufficient.
-  await page.waitForTimeout(1000)
-
   await expect(
     page.getByRole('button', { name: 'Start Sketch' })
   ).not.toBeDisabled()
@@ -764,4 +700,6 @@ const part002 = startSketchOn(part001, 'seg01')
   await expect(page).toHaveScreenshot({
     maxDiffPixels: 100,
   })
+
+  await page.waitForTimeout(200)
 })