Path enum no longer includes BasePath

BasePath is a pair of points and geometry metadata.

Previously BasePath was used for:

 - The start of a sketch
 - The data which all path types have in common

It wasn't a good fit for the start of a sketch, because there was a lot
of duplicated information, and a sketch starts at a point, not a line
(two points).

This adds a separate SketchStart struct which replaces the first use
of BasePath. This means BasePath no longer needs to be a variant of
Path, simplifying it.

Solves problem 4 of
 https://github.com/KittyCAD/modeling-app/issues/4297

docs/kcl/types/Path.md

@@ -141,26 +141,6 @@ An angled line to.
 | `__geoMeta` |[`GeoMeta`](/docs/kcl/types/GeoMeta)| Metadata. | No |
 
 
-----
-A base path.
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Base`|  | No |
-| `from` |`[number, number]`| The from point. | No |
-| `to` |`[number, number]`| The to point. | No |
-| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag of the path. | No |
-| `__geoMeta` |[`GeoMeta`](/docs/kcl/types/GeoMeta)| Metadata. | No |
-
-
 ----
 A circular arc, not necessarily tangential to the current point.
 

docs/kcl/types/Sketch.md

@@ -19,7 +19,7 @@ A sketch is a collection of paths.
 | `id` |`string`| The id of the sketch (this will change when the engine's reference to it changes). | No |
 | `paths` |`[` [`Path`](/docs/kcl/types/Path) `]`| The paths in the sketch. | No |
 | `on` |[`SketchSurface`](/docs/kcl/types/SketchSurface)| What the sketch is on (can be a plane or a face). | No |
-| `start` |[`BasePath`](/docs/kcl/types/BasePath)| The starting path. | No |
+| `start` |[`SketchStart`](/docs/kcl/types/SketchStart)| The starting path. | No |
 | `tags` |`object`| Tag identifiers that have been declared in this sketch. | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`| Metadata. | No |
 

docs/kcl/types/SketchSet.md

@@ -28,7 +28,7 @@ A sketch is a collection of paths.
 | `id` |`string`| The id of the sketch (this will change when the engine's reference to it changes). | No |
 | `paths` |`[` [`Path`](/docs/kcl/types/Path) `]`| The paths in the sketch. | No |
 | `on` |[`SketchSurface`](/docs/kcl/types/SketchSurface)| What the sketch is on (can be a plane or a face). | No |
-| `start` |[`BasePath`](/docs/kcl/types/BasePath)| The starting path. | No |
+| `start` |[`SketchStart`](/docs/kcl/types/SketchStart)| The starting path. | No |
 | `tags` |`object`| Tag identifiers that have been declared in this sketch. | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`| Metadata. | No |
 

docs/kcl/types/SketchStart.md

@@ -0,0 +1,23 @@
+---
+title: "SketchStart"
+excerpt: "Where the sketch starts."
+layout: manual
+---
+
+Where the sketch starts.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `at` |`[number, number]`| Start point. | No |
+| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| Tag of the start point. | No |
+| `__geoMeta` |[`GeoMeta`](/docs/kcl/types/GeoMeta)| Metadata. | No |
+
+

docs/kcl/types/TagEngineInfo.md

@@ -43,6 +43,22 @@ The surface information for the tag.
 | `surface` |[`ExtrudeSurface`](/docs/kcl/types/ExtrudeSurface)| Engine information for a tag. | No |
 
 
+----
+The point being tagged.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `point` |`[number, number]`|  | No |
+
+
 ----
 
 

src/wasm-lib/kcl/src/executor.rs

@@ -1141,6 +1141,11 @@ impl TagEngineInfo {
     pub fn surface(&self) -> Option<&ExtrudeSurface> {
         self.tagged.surface()
     }
+
+    /// If this is tagging a point, get it.
+    pub fn point(&self) -> Option<&[f64; 2]> {
+        self.tagged.point()
+    }
 }
 
 #[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
@@ -1151,6 +1156,8 @@ pub enum Tagged {
     Path(Path),
     /// The surface information for the tag.
     Surface(ExtrudeSurface),
+    /// The point being tagged.
+    Point([f64; 2]),
 }
 
 impl Tagged {
@@ -1169,6 +1176,13 @@ impl Tagged {
         };
         Some(x)
     }
+    /// If this is a path, get it.
+    fn point(&self) -> Option<&[f64; 2]> {
+        let Self::Point(x) = &self else {
+            return None;
+        };
+        Some(x)
+    }
 }
 
 /// A sketch is a collection of paths.
@@ -1183,7 +1197,7 @@ pub struct Sketch {
     /// What the sketch is on (can be a plane or a face).
     pub on: SketchSurface,
     /// The starting path.
-    pub start: BasePath,
+    pub start: SketchStart,
     /// Tag identifiers that have been declared in this sketch.
     #[serde(default, skip_serializing_if = "HashMap::is_empty")]
     pub tags: HashMap<String, TagIdentifier>,
@@ -1261,7 +1275,7 @@ impl Sketch {
     /// where the last path segment ends, and the next path segment will begin.
     pub(crate) fn current_pen_position(&self) -> Result<Point2d, KclError> {
         let Some(path) = self.latest_path() else {
-            return Ok(self.start.to.into());
+            return Ok(self.start.at.into());
         };
 
         let base = path.get_base();
@@ -1271,7 +1285,7 @@ impl Sketch {
     pub(crate) fn get_tangential_info_from_paths(&self) -> GetTangentialInfoFromPathsResult {
         let Some(path) = self.latest_path() else {
             return GetTangentialInfoFromPathsResult {
-                center_or_tangent_point: self.start.to,
+                center_or_tangent_point: self.start.at,
                 is_center: false,
                 ccw: false,
             };
@@ -1617,6 +1631,21 @@ pub struct BasePath {
     pub geo_meta: GeoMeta,
 }
 
+/// Where the sketch starts.
+#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
+#[ts(export)]
+#[serde(rename_all = "camelCase")]
+pub struct SketchStart {
+    /// Start point.
+    #[ts(type = "[number, number]")]
+    pub at: [f64; 2],
+    /// Tag of the start point.
+    pub tag: Option<TagDeclarator>,
+    /// Metadata.
+    #[serde(rename = "__geoMeta")]
+    pub geo_meta: GeoMeta,
+}
+
 /// Geometry metadata.
 #[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
 #[ts(export)]
@@ -1689,11 +1718,6 @@ pub enum Path {
         /// The y coordinate.
         y: Option<f64>,
     },
-    /// A base path.
-    Base {
-        #[serde(flatten)]
-        base: BasePath,
-    },
     /// A circular arc, not necessarily tangential to the current point.
     Arc {
         #[serde(flatten)]
@@ -1709,7 +1733,6 @@ pub enum Path {
 #[derive(Display)]
 enum PathType {
     ToPoint,
-    Base,
     TangentialArc,
     TangentialArcTo,
     Circle,
@@ -1727,7 +1750,6 @@ impl From<&Path> for PathType {
             Path::Circle { .. } => Self::Circle,
             Path::Horizontal { .. } => Self::Horizontal,
             Path::AngledLineTo { .. } => Self::AngledLineTo,
-            Path::Base { .. } => Self::Base,
             Path::Arc { .. } => Self::Arc,
         }
     }
@@ -1739,7 +1761,6 @@ impl Path {
             Path::ToPoint { base } => base.geo_meta.id,
             Path::Horizontal { base, .. } => base.geo_meta.id,
             Path::AngledLineTo { base, .. } => base.geo_meta.id,
-            Path::Base { base } => base.geo_meta.id,
             Path::TangentialArcTo { base, .. } => base.geo_meta.id,
             Path::TangentialArc { base, .. } => base.geo_meta.id,
             Path::Circle { base, .. } => base.geo_meta.id,
@@ -1752,7 +1773,6 @@ impl Path {
             Path::ToPoint { base } => base.tag.clone(),
             Path::Horizontal { base, .. } => base.tag.clone(),
             Path::AngledLineTo { base, .. } => base.tag.clone(),
-            Path::Base { base } => base.tag.clone(),
             Path::TangentialArcTo { base, .. } => base.tag.clone(),
             Path::TangentialArc { base, .. } => base.tag.clone(),
             Path::Circle { base, .. } => base.tag.clone(),
@@ -1765,7 +1785,6 @@ impl Path {
             Path::ToPoint { base } => base,
             Path::Horizontal { base, .. } => base,
             Path::AngledLineTo { base, .. } => base,
-            Path::Base { base } => base,
             Path::TangentialArcTo { base, .. } => base,
             Path::TangentialArc { base, .. } => base,
             Path::Circle { base, .. } => base,
@@ -1785,7 +1804,7 @@ impl Path {
     /// Length of this path segment, in cartesian plane.
     pub fn length(&self) -> f64 {
         match self {
-            Self::ToPoint { .. } | Self::Base { .. } | Self::Horizontal { .. } | Self::AngledLineTo { .. } => {
+            Self::ToPoint { .. } | Self::Horizontal { .. } | Self::AngledLineTo { .. } => {
                 linear_distance(self.get_from(), self.get_to())
             }
             Self::TangentialArc {
@@ -1818,7 +1837,6 @@ impl Path {
             Path::ToPoint { base } => Some(base),
             Path::Horizontal { base, .. } => Some(base),
             Path::AngledLineTo { base, .. } => Some(base),
-            Path::Base { base } => Some(base),
             Path::TangentialArcTo { base, .. } => Some(base),
             Path::TangentialArc { base, .. } => Some(base),
             Path::Circle { base, .. } => Some(base),

src/wasm-lib/kcl/src/std/extrude.rs

@@ -238,7 +238,7 @@ pub(crate) async fn do_post_extrude(
                         });
                         Some(extrude_surface)
                     }
-                    Path::Base { .. } | Path::ToPoint { .. } | Path::Horizontal { .. } | Path::AngledLineTo { .. } => {
+                    Path::ToPoint { .. } | Path::Horizontal { .. } | Path::AngledLineTo { .. } => {
                         let extrude_surface = ExtrudeSurface::ExtrudePlane(crate::executor::ExtrudePlane {
                             face_id: *actual_face_id,
                             tag: path.get_base().tag.clone(),

src/wasm-lib/kcl/src/std/sketch.rs

@@ -12,7 +12,7 @@ use parse_display::{Display, FromStr};
 use schemars::JsonSchema;
 use serde::{Deserialize, Serialize};
 
-use crate::executor::Tagged;
+use crate::executor::{SketchStart, Tagged};
 use crate::{
     ast::types::TagDeclarator,
     errors::{KclError, KclErrorDetails},
@@ -1224,9 +1224,8 @@ pub(crate) async fn inner_start_profile_at(
     )
     .await?;
 
-    let current_path = BasePath {
-        from: to,
-        to,
+    let start = SketchStart {
+        at: to,
         tag: tag.clone(),
         geo_meta: GeoMeta {
             id,
@@ -1243,17 +1242,15 @@ pub(crate) async fn inner_start_profile_at(
         tags: if let Some(tag) = &tag {
             let mut tag_identifier: TagIdentifier = tag.into();
             tag_identifier.info = Some(TagEngineInfo {
-                id: current_path.geo_meta.id,
+                id,
                 sketch: path_id,
-                tagged: Tagged::Path(Path::Base {
-                    base: current_path.clone(),
-                }),
+                tagged: Tagged::Point(to),
             });
             HashMap::from([(tag.name.to_string(), tag_identifier)])
         } else {
             Default::default()
         },
-        start: current_path,
+        start,
     };
     Ok(sketch)
 }
@@ -1279,7 +1276,7 @@ pub async fn profile_start_x(_exec_state: &mut ExecState, args: Args) -> Result<
     name = "profileStartX"
 }]
 pub(crate) fn inner_profile_start_x(sketch: Sketch) -> Result<f64, KclError> {
-    Ok(sketch.start.to[0])
+    Ok(sketch.start.at[0])
 }
 
 /// Returns the Y component of the sketch profile start point.
@@ -1302,7 +1299,7 @@ pub async fn profile_start_y(_exec_state: &mut ExecState, args: Args) -> Result<
     name = "profileStartY"
 }]
 pub(crate) fn inner_profile_start_y(sketch: Sketch) -> Result<f64, KclError> {
-    Ok(sketch.start.to[1])
+    Ok(sketch.start.at[1])
 }
 
 /// Returns the sketch profile start point.
@@ -1336,7 +1333,7 @@ pub async fn profile_start(_exec_state: &mut ExecState, args: Args) -> Result<Kc
     name = "profileStart"
 }]
 pub(crate) fn inner_profile_start(sketch: Sketch) -> Result<[f64; 2], KclError> {
-    Ok(sketch.start.to)
+    Ok(sketch.start.at)
 }
 
 /// Close the current sketch.
@@ -1379,7 +1376,7 @@ pub(crate) async fn inner_close(
     args: Args,
 ) -> Result<Sketch, KclError> {
     let from = sketch.current_pen_position()?;
-    let to: Point2d = sketch.start.from.into();
+    let to: Point2d = sketch.start.at.into();
 
     let id = exec_state.id_generator.next_uuid();