Don't bail command palette if there's no engineConnection (#6286)

The connection can't be bad if there is not yet `:galaxy-brain:`.

But seriously this behavior regressed share links because we would bail
from the command palette because the connection wasn't healthy.

.codespellrc

@@ -1,3 +1,3 @@
 [codespell]
-ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser
+ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser,fromM,FromM
 skip: **/target,node_modules,build,dist,./out,**/Cargo.lock,./docs/kcl/*.md,.yarn.lock,**/yarn.lock,./openapi/*.json,./packages/codemirror-lang-kcl/test/all.test.ts,./public/kcl-samples,./rust/kcl-lib/tests/kcl_samples,tsconfig.tsbuildinfo

.github/ci-cd-scripts/start-vector-macos.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+set -euo pipefail
+
+# Install vector
+brew tap vectordotdev/brew && brew install vector
+
+# Configure vector
+mkdir -p /tmp/vector
+cp .github/workflows/vector.toml /tmp/vector.toml
+sed -i '' "s#OS_NAME#${OS_NAME}#g" /tmp/vector.toml
+sed -i '' "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+sed -i '' "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+sed -i '' "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+sed -i '' "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+sed -i '' "s#GH_ACTIONS_AXIOM_TOKEN#${GH_ACTIONS_AXIOM_TOKEN}#g" /tmp/vector.toml
+
+# Display settings
+echo
+echo 'Vector config:'
+cat /tmp/vector.toml
+echo
+
+# Start in the background
+$(brew --prefix)/opt/vector/bin/vector --config /tmp/vector.toml &

.github/ci-cd-scripts/start-vector-ubuntu.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+set -euo pipefail
+
+# Install vector
+curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev | bash -s -- -y
+
+# Configure vector
+mkdir -p /tmp/vector
+cp .github/workflows/vector.toml /tmp/vector.toml
+sed -i "s#OS_NAME#${OS_NAME}#g" /tmp/vector.toml
+sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${GH_ACTIONS_AXIOM_TOKEN}#g" /tmp/vector.toml
+
+# Display settings
+echo
+echo 'Vector config:'
+cat /tmp/vector.toml
+echo
+
+# Start in background
+${HOME}/.vector/bin/vector --config /tmp/vector.toml &

.github/workflows/build-and-store-wasm.yml

@@ -24,7 +24,7 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         with:
           tool: wasm-pack
       - name: Rust Cache

.github/workflows/build-apps.yml

@@ -77,7 +77,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         if: ${{ steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -207,6 +207,13 @@ jobs:
           smctl.exe keypair ls
           C:\Windows\System32\certutil.exe -csp "DigiCert Signing Manager KSP" -key -user
           smksp_cert_sync.exe
+          smctl windows certsync
+        # This last line `smctl windows certsync` was added after windows codesign failures started happening
+        # with nightly-v25.4.10. It looks like `smksp_cert_sync.exe` used to do the sync to the local cert store,
+        # but stopped doing it overnight. This extra call that I randomly got from this azure-related doc page
+        # https://docs.digicert.com/en/digicert-keylocker/code-signing/sign-with-third-party-signing-tools/windows-applications/sign-azure-apps-with-signtool-using-ksp-library.html#sync-certificates--windows-only--618365
+        # seems to be doing that extra sync that we need for scripts/sign-win.js to work.
+        # TODO: we still need to make sign-win.js errors fail the workflow, see issue #6276
         shell: cmd
 
       - name: Build the app (debug)
@@ -378,7 +385,7 @@ jobs:
           NOTES: ${{ needs.prepare-files.outputs.notes }}
           PUB_DATE: ${{ github.event.repository.updated_at }}
           WEBSITE_DIR: ${{ env.IS_NIGHTLY == 'true' && 'dl.zoo.dev/releases/modeling-app/nightly' || 'dl.zoo.dev/releases/modeling-app' }}
-          URL_CODED_NAME: ${{ env.IS_NIGHTLY == 'true' && 'Zoo%20Modeling%20App%20%28Nightly%29' || 'Zoo%20Modeling%20App' }}
+          URL_CODED_NAME: ${{ env.IS_NIGHTLY == 'true' && 'Zoo%20Design%20Studio%20%28Nightly%29' || 'Zoo%20Design%20Studio' }}
         run: |
           RELEASE_DIR=https://${WEBSITE_DIR}
           jq --null-input \

.github/workflows/cargo-test.yml

@@ -34,20 +34,11 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - name: Install vector
-        run: |
-          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
-          chmod +x /tmp/vector.sh
-          /tmp/vector.sh -y -no-modify-path
-          mkdir -p /tmp/vector
-          cp .github/workflows/vector.toml /tmp/vector.toml
-          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
-          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
-          cat /tmp/vector.toml
-          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
+      - name: Start Vector
+        run: .github/ci-cd-scripts/start-vector-ubuntu.sh
+        env:
+          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
+          OS_NAME: ${{ env.OS_NAME }}
       - uses: taiki-e/install-action@cargo-llvm-cov
       - uses: taiki-e/install-action@nextest
       - name: Install just

.github/workflows/e2e-tests.yml

@@ -140,7 +140,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         if: ${{ needs.conditions.outputs.should-run == 'true' && steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -231,6 +231,11 @@ jobs:
         env:
           token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
           snapshottoken: ${{ secrets.KITTYCAD_API_TOKEN }}
+          TAB_API_URL: ${{ secrets.TAB_API_URL }}
+          TAB_API_KEY: ${{ secrets.TAB_API_KEY }}
+          CI_COMMIT_SHA: ${{ github.event.pull_request.head.sha }}
+          CI_PR_NUMBER: ${{ github.event.pull_request.number }}
+          TARGET: web
 
       - uses: actions/upload-artifact@v4
         if: ${{ needs.conditions.outputs.should-run == 'true' && !cancelled() && (success() || failure()) }}
@@ -281,7 +286,7 @@ jobs:
         os:
           - "runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64"
           - namespace-profile-macos-8-cores
-          - windows-latest
+          - windows-latest-8-cores
         shardIndex: [1, 2, 3, 4]
         shardTotal: [4]
         # Disable macos and windows tests on hourly e2e tests since we only care
@@ -292,7 +297,7 @@ jobs:
         exclude:
           - os: namespace-profile-macos-8-cores
             isScheduled: true
-          - os: windows-latest
+          - os: windows-latest-8-cores
             isScheduled: true
         # TODO: add ref here for main and latest release tag
     runs-on: ${{ matrix.os }}
@@ -339,22 +344,12 @@ jobs:
         if: needs.conditions.outputs.should-run == 'true'
         run: yarn tronb:vite:dev
 
-      - name: Install vector
-        if: ${{ needs.conditions.outputs.should-run == 'true' && contains(matrix.os, 'ubuntu') }}
-        shell: bash
-        run: |
-          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
-          chmod +x /tmp/vector.sh
-          /tmp/vector.sh -y -no-modify-path
-          mkdir -p /tmp/vector
-          cp .github/workflows/vector.toml /tmp/vector.toml
-          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
-          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
-          cat /tmp/vector.toml
-          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
+      - name: Start Vector
+        if: ${{ needs.conditions.outputs.should-run == 'true' && !contains(matrix.os, 'windows') }}
+        run: .github/ci-cd-scripts/start-vector-${{ env.OS_NAME }}.sh
+        env:
+          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
+          OS_NAME: ${{ env.OS_NAME }}
 
       - uses: actions/download-artifact@v4
         if: ${{ needs.conditions.outputs.should-run == 'true' && !cancelled() && (success() || failure()) }}
@@ -375,6 +370,11 @@ jobs:
         env:
           FAIL_ON_CONSOLE_ERRORS: true
           token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
+          TAB_API_URL: ${{ secrets.TAB_API_URL }}
+          TAB_API_KEY: ${{ secrets.TAB_API_KEY }}
+          CI_COMMIT_SHA: ${{ github.event.pull_request.head.sha }}
+          CI_PR_NUMBER: ${{ github.event.pull_request.number }}
+          TARGET: desktop
 
       - uses: actions/upload-artifact@v4
         if: ${{ needs.conditions.outputs.should-run == 'true' && always() }}

.github/workflows/nix.yml

@@ -0,0 +1,55 @@
+name: Test Nix Flake
+
+on:
+  push:
+    branches: [main]
+  pull_request:
+  workflow_dispatch:
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+jobs:
+  nix-flake-check:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+
+      - uses: cachix/install-nix-action@v31
+        with:
+          nix_path: nixpkgs=channel:nixos-unstable
+
+      - name: nix flake check for all platforms
+        run: |
+          nix flake check --all-systems
+
+  nix-build-linux:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+
+      - uses: cachix/install-nix-action@v31
+        with:
+          nix_path: nixpkgs=channel:nixos-unstable
+
+      - name: nix build . for x86_64-linux
+        run: nix build .
+
+  nix-build-macos:
+    runs-on: macos-latest
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+
+      - uses: cachix/install-nix-action@v31
+        with:
+          nix_path: nixpkgs=channel:nixos-unstable
+
+      - name: nix build . for x86_64-darwin
+        run: nix build .
+

.github/workflows/static-analysis.yml

@@ -51,7 +51,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         with:
           tool: wasm-pack
 
@@ -191,7 +191,7 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         with:
           tool: wasm-pack
 
@@ -236,7 +236,7 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         with:
           tool: wasm-pack
 

.github/workflows/vector.toml

@@ -8,6 +8,7 @@ include = ["/tmp/github-actions.log"]
 type = "remap"
 inputs = [ "github-actions-file" ]
 source = '''
+.platform = "OS_NAME"
 .action = "GITHUB_WORKFLOW"
 .repo = "GITHUB_REPOSITORY"
 .sha = "GITHUB_SHA"

.gitignore

@@ -26,6 +26,7 @@ yarn-error.log*
 .idea
 .vscode
 .helix
+result
 
 # rust
 rust/target

Makefile

@@ -5,11 +5,18 @@ all: install build check
 # INSTALL
 
 ifeq ($(OS),Windows_NT)
-	CARGO ?= ~/.cargo/bin/cargo.exe
-	WASM_PACK ?= ~/.cargo/bin/wasm-pack.exe
+export WINDOWS := true
+ifndef MSYSTEM
+export POWERSHELL := true
+endif
+endif
+
+ifdef WINDOWS
+CARGO ?= $(USERPROFILE)/.cargo/bin/cargo.exe
+WASM_PACK ?= $(USERPROFILE)/.cargo/bin/wasm-pack.exe
 else
-	CARGO ?= ~/.cargo/bin/cargo
-	WASM_PACK ?= ~/.cargo/bin/wasm-pack
+CARGO ?= ~/.cargo/bin/cargo
+WASM_PACK ?= ~/.cargo/bin/wasm-pack
 endif
 
 .PHONY: install
@@ -17,21 +24,21 @@ install: node_modules/.yarn-integrity $(CARGO) $(WASM_PACK) ## Install dependenc
 
 node_modules/.yarn-integrity: package.json yarn.lock
 	yarn install
-ifeq ($(OS),Windows_NT)
+ifdef POWERSHELL
 	@ type nul > $@
 else
 	@ touch $@
 endif
 
 $(CARGO):
-ifeq ($(OS),Windows_NT)
+ifdef WINDOWS
 	yarn install:rust:windows
 else
 	yarn install:rust
 endif
 
 $(WASM_PACK):
-ifeq ($(OS),Windows_NT)
+ifdef WINDOWS
 	yarn install:wasm-pack:cargo
 else
 	yarn install:wasm-pack:sh
@@ -57,7 +64,7 @@ build-web: install public/kcl_wasm_lib_bg.wasm build/index.html
 build-desktop: install public/kcl_wasm_lib_bg.wasm .vite/build/main.js
 
 public/kcl_wasm_lib_bg.wasm: $(CARGO_SOURCES) $(RUST_SOURCES)
-ifeq ($(OS),Windows_NT)
+ifdef WINDOWS
 	yarn build:wasm:dev:windows
 else
 	yarn build:wasm:dev
@@ -140,8 +147,8 @@ endif
 
 .PHONY: clean
 clean: ## Delete all artifacts
-ifeq ($(OS),Windows_NT)
-	git clean --force -d -X
+ifdef POWERSHELL
+	git clean --force -d -x --exclude=.env* --exclude=**/*.env
 else
 	rm -rf .vite/ build/
 	rm -rf trace.zip playwright-report/ test-results/
@@ -152,7 +159,7 @@ endif
 
 .PHONY: help
 help: install
-ifeq ($(OS),Windows_NT)
+ifdef POWERSHELL
 	@ powershell -Command "Get-Content $(MAKEFILE_LIST) | Select-String -Pattern '^[^\s]+:.*##\s.*$$' | ForEach-Object { $$line = $$_.Line -split ':.*?##\s+'; Write-Host -NoNewline $$line[0].PadRight(30) -ForegroundColor Cyan; Write-Host $$line[1] }"
 else
 	@ grep -E '^[^[:space:]]+:.*## .*$$' $(MAKEFILE_LIST) | awk 'BEGIN {FS = ":.*?## "}; {printf "\033[36m%-30s\033[0m %s\n", $$1, $$2}'

docs/kcl/abs.md

@@ -36,9 +36,9 @@ myAngle = -120
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [8, 0])
-  |> angledLine({ angle = abs(myAngle), length = 5 }, %)
+  |> angledLine(angle = abs(myAngle), length = 5)
   |> line(end = [-5, 0])
-  |> angledLine({ angle = myAngle, length = 5 }, %)
+  |> angledLine(angle = myAngle, length = 5)
   |> close()
 
 baseExtrusion = extrude(sketch001, length = 5)

docs/kcl/acos.md

@@ -33,10 +33,7 @@ acos(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = toDegrees(acos(0.5)),
-       length = 10
-     }, %)
+  |> angledLine(angle = toDegrees(acos(0.5)), length = 10)
   |> line(end = [5, 0])
   |> line(endAbsolute = [12, 0])
   |> close()

docs/kcl/angleToMatchLengthX.md

@@ -36,7 +36,7 @@ angleToMatchLengthX(
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [2, 5], tag = $seg01)
-  |> angledLineToX([-angleToMatchLengthX(seg01, 7, %), 10], %)
+  |> angledLine(angle = -angleToMatchLengthX(seg01, 7, %), endAbsoluteX = 10)
   |> close()
 
 extrusion = extrude(sketch001, length = 5)

docs/kcl/angleToMatchLengthY.md

@@ -36,10 +36,7 @@ angleToMatchLengthY(
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [1, 2], tag = $seg01)
-  |> angledLine({
-       angle = angleToMatchLengthY(seg01, 15, %),
-       length = 5
-     }, %)
+  |> angledLine(angle = angleToMatchLengthY(seg01, 15, %), length = 5)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/angledLine.md

@@ -10,8 +10,13 @@ Draw a line segment relative to the current origin using the polar measure of so
 
 ```js
 angledLine(
-  data: AngledLineData,
   sketch: Sketch,
+  angle: number,
+  length?: number,
+  lengthX?: number,
+  lengthY?: number,
+  endAbsoluteX?: number,
+  endAbsoluteY?: number,
   tag?: TagDeclarator,
 ): Sketch
 ```
@@ -21,9 +26,14 @@ angledLine(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `data` | [`AngledLineData`](/docs/kcl/types/AngledLineData) | Data to draw an angled line. | Yes |
-| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) |  | Yes |
-| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | Which sketch should this path be added to? | Yes |
+| `angle` | [`number`](/docs/kcl/types/number) | Which angle should the line be drawn at? | Yes |
+| `length` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the given angle. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| `lengthX` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the X axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| `lengthY` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| `endAbsoluteX` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the X axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| `endAbsoluteY` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 
 ### Returns
 
@@ -36,7 +46,7 @@ angledLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> yLine(endAbsolute = 15)
-  |> angledLine({ angle = 30, length = 15 }, %)
+  |> angledLine(angle = 30, length = 15)
   |> line(end = [8, -10])
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl/appearance.md

@@ -188,9 +188,9 @@ example = extrude(exampleSketch, length = 1)
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc({ offset = 90, radius = 5 }, %)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc({ offset = -90, radius = 5 }, %)
+  |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
 
 pipeHole = startSketchOn(XY)

docs/kcl/asin.md

@@ -33,10 +33,7 @@ asin(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = toDegrees(asin(0.5)),
-       length = 20
-     }, %)
+  |> angledLine(angle = toDegrees(asin(0.5)), length = 20)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/atan.md

@@ -33,10 +33,7 @@ atan(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = toDegrees(atan(1.25)),
-       length = 20
-     }, %)
+  |> angledLine(angle = toDegrees(atan(1.25)), length = 20)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/atan2.md

@@ -37,10 +37,7 @@ atan2(
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = toDegrees(atan2(1.25, 2)),
-       length = 20
-     }, %)
+  |> angledLine(angle = toDegrees(atan2(1.25, 2)), length = 20)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/consts/std-math-E.md

@@ -17,10 +17,10 @@ std::math::E: number = 2.71828182845904523536028747135266250_
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
+  |> angledLine(
     angle = 30,
     length = 2 * E ^ 2,
-  }, %)
+  )
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/consts/std-math-PI.md

@@ -18,7 +18,7 @@ std::math::PI: number = 3.14159265358979323846264338327950288_
 circumference = 70
 
 exampleSketch = startSketchOn(XZ)
- |> circle(center = [0, 0], radius = circumference/ (2 * PI))
+ |> circle(center = [0, 0], radius = circumference / (2 * PI))
 
 example = extrude(exampleSketch, length = 5)
 ```

docs/kcl/consts/std-math-TAU.md

@@ -17,10 +17,10 @@ std::math::TAU: number = 6.28318530717958647692528676655900577_
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
+  |> angledLine(
     angle = 50,
     length = 10 * TAU,
-  }, %)
+  )
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/e.md

@@ -30,7 +30,7 @@ e(): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 30, length = 2 * e() ^ 2 }, %)
+  |> angledLine(angle = 30, length = 2 * e() ^ 2)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/getNextAdjacentEdge.md

@@ -30,10 +30,10 @@ getNextAdjacentEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine({ angle = 60, length = 10 }, %)
-  |> angledLine({ angle = 120, length = 10 }, %)
+  |> angledLine(angle = 60, length = 10)
+  |> angledLine(angle = 120, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
+  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/getOppositeEdge.md

@@ -30,10 +30,10 @@ getOppositeEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine({ angle = 60, length = 10 }, %)
-  |> angledLine({ angle = 120, length = 10 }, %)
+  |> angledLine(angle = 60, length = 10)
+  |> angledLine(angle = 120, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
+  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/getPreviousAdjacentEdge.md

@@ -30,10 +30,10 @@ getPreviousAdjacentEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine({ angle = 60, length = 10 }, %)
-  |> angledLine({ angle = 120, length = 10 }, %)
+  |> angledLine(angle = 60, length = 10)
+  |> angledLine(angle = 120, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
+  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/hollow.md

@@ -65,7 +65,7 @@ case = startSketchOn(-XZ)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArcTo([-size, size], %)
+  |> tangentialArc(endAbsolute = [-size, size])
   |> close()
   |> extrude(length = 65)
 

docs/kcl/index.md

@@ -43,11 +43,7 @@ layout: manual
   * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
   * [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
   * [`angledLine`](kcl/angledLine)
-  * [`angledLineOfXLength`](kcl/angledLineOfXLength)
-  * [`angledLineOfYLength`](kcl/angledLineOfYLength)
   * [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
-  * [`angledLineToX`](kcl/angledLineToX)
-  * [`angledLineToY`](kcl/angledLineToY)
   * [`appearance`](kcl/appearance)
   * [`arc`](kcl/arc)
   * [`arcTo`](kcl/arcTo)
@@ -65,11 +61,15 @@ layout: manual
   * [`chamfer`](kcl/chamfer)
   * [`circleThreePoint`](kcl/circleThreePoint)
   * [`close`](kcl/close)
-  * [`cm`](kcl/cm)
   * [`extrude`](kcl/extrude)
   * [`fillet`](kcl/fillet)
   * [`floor`](kcl/floor)
-  * [`ft`](kcl/ft)
+  * [`fromCm`](kcl/fromCm)
+  * [`fromFt`](kcl/fromFt)
+  * [`fromInches`](kcl/fromInches)
+  * [`fromM`](kcl/fromM)
+  * [`fromMm`](kcl/fromMm)
+  * [`fromYd`](kcl/fromYd)
   * [`getCommonEdge`](kcl/getCommonEdge)
   * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
   * [`getOppositeEdge`](kcl/getOppositeEdge)
@@ -77,7 +77,7 @@ layout: manual
   * [`helix`](kcl/std-helix)
   * [`hole`](kcl/hole)
   * [`hollow`](kcl/hollow)
-  * [`inch`](kcl/inch)
+  * [`intersect`](kcl/intersect)
   * [`lastSegX`](kcl/lastSegX)
   * [`lastSegY`](kcl/lastSegY)
   * [`legAngX`](kcl/legAngX)
@@ -89,11 +89,9 @@ layout: manual
   * [`log`](kcl/log)
   * [`log10`](kcl/log10)
   * [`log2`](kcl/log2)
-  * [`m`](kcl/m)
   * [`map`](kcl/map)
   * [`max`](kcl/max)
   * [`min`](kcl/min)
-  * [`mm`](kcl/mm)
   * [`offsetPlane`](kcl/offsetPlane)
   * [`patternCircular2d`](kcl/patternCircular2d)
   * [`patternCircular3d`](kcl/patternCircular3d)
@@ -101,7 +99,6 @@ layout: manual
   * [`patternLinear3d`](kcl/patternLinear3d)
   * [`patternTransform`](kcl/patternTransform)
   * [`patternTransform2d`](kcl/patternTransform2d)
-  * [`polar`](kcl/polar)
   * [`polygon`](kcl/polygon)
   * [`pop`](kcl/pop)
   * [`pow`](kcl/pow)
@@ -127,22 +124,22 @@ layout: manual
   * [`sqrt`](kcl/sqrt)
   * [`startProfileAt`](kcl/startProfileAt)
   * [`startSketchOn`](kcl/startSketchOn)
+  * [`subtract`](kcl/subtract)
   * [`sweep`](kcl/sweep)
   * [`tangentToEnd`](kcl/tangentToEnd)
   * [`tangentialArc`](kcl/tangentialArc)
-  * [`tangentialArcTo`](kcl/tangentialArcTo)
-  * [`tangentialArcToRelative`](kcl/tangentialArcToRelative)
   * [`toDegrees`](kcl/toDegrees)
   * [`toRadians`](kcl/toRadians)
   * [`translate`](kcl/translate)
+  * [`union`](kcl/union)
   * [`xLine`](kcl/xLine)
   * [`yLine`](kcl/yLine)
-  * [`yd`](kcl/yd)
 * **std::math**
   * [`E`](kcl/consts/std-math-E)
   * [`PI`](kcl/consts/std-math-PI)
   * [`TAU`](kcl/consts/std-math-TAU)
   * [`cos`](kcl/std-math-cos)
+  * [`polar`](kcl/std-math-polar)
   * [`sin`](kcl/std-math-sin)
   * [`tan`](kcl/std-math-tan)
 * **std::sketch**

docs/kcl/max.md

@@ -33,10 +33,7 @@ max(args: [number]): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = 70,
-       length = max(15, 31, 4, 13, 22)
-     }, %)
+  |> angledLine(angle = 70, length = max(15, 31, 4, 13, 22))
   |> line(end = [20, 0])
   |> close()
 

docs/kcl/min.md

@@ -33,10 +33,7 @@ min(args: [number]): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = 70,
-       length = min(15, 31, 4, 13, 22)
-     }, %)
+  |> angledLine(angle = 70, length = min(15, 31, 4, 13, 22))
   |> line(end = [20, 0])
   |> close()
 

docs/kcl/patternLinear3d.md

@@ -57,7 +57,7 @@ case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArcTo([-size, size], %)
+  |> tangentialArc(endAbsolute = [-size, size])
   |> close(%)
   |> extrude(length = 65)
 
@@ -88,7 +88,7 @@ case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArcTo([-size, size], %)
+  |> tangentialArc(endAbsolute = [-size, size])
   |> close(%)
   |> extrude(length = 65)
 

docs/kcl/pow.md

@@ -37,7 +37,7 @@ pow(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 50, length = pow(5, 2) }, %)
+  |> angledLine(angle = 50, length = pow(5, 2))
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/profileStart.md

@@ -29,11 +29,8 @@ profileStart(sketch: Sketch): [number]
 ```js
 sketch001 = startSketchOn(XY)
   |> startProfileAt([5, 2], %)
-  |> angledLine({ angle = 120, length = 50 }, %, $seg01)
-  |> angledLine({
-       angle = segAng(seg01) + 120,
-       length = 50
-     }, %)
+  |> angledLine(angle = 120, length = 50, tag = $seg01)
+  |> angledLine(angle = segAng(seg01) + 120, length = 50)
   |> line(end = profileStart(%))
   |> close()
   |> extrude(length = 20)

docs/kcl/reduce.md

@@ -78,7 +78,7 @@ assertEqual(sum, 6, 0.00001, "1 + 2 + 3 summed is 6")
 ```js
 // Declare a function that sketches a decagon.
 fn decagon(radius) {
-  // Each side of the decagon is turned this many degrees from the previous angle.
+  // Each side of the decagon is turned this many radians from the previous angle.
   stepAngle = 1 / 10 * TAU
 
   // Start the decagon sketch at this point.

docs/kcl/rotate.md

@@ -65,9 +65,9 @@ rotate(
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc({ offset = 90, radius = 5 }, %)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc({ offset = -90, radius = 5 }, %)
+  |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -90,9 +90,9 @@ sweepSketch = startSketchOn(XY)
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc({ offset = 90, radius = 5 }, %)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc({ offset = -90, radius = 5 }, %)
+  |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -115,9 +115,9 @@ sweepSketch = startSketchOn(XY)
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc({ offset = 90, radius = 5 }, %)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc({ offset = -90, radius = 5 }, %)
+  |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -151,15 +151,9 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       50.61
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %)
+  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
@@ -168,7 +162,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
-  |> tangentialArc({ radius = 80, offset = -90 }, %)
+  |> tangentialArc(radius = 80, angle = -90)
   |> xLine(length = 384.93)
 
 parts = sweep([rectangleSketch, circleSketch], path = sweepPath)

docs/kcl/scale.md

@@ -49,9 +49,9 @@ scale(
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc({ offset = 90, radius = 5 }, %)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc({ offset = -90, radius = 5 }, %)
+  |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -85,15 +85,9 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       50.61
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %)
+  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
@@ -102,7 +96,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
-  |> tangentialArc({ radius = 80, offset = -90 }, %)
+  |> tangentialArc(radius = 80, angle = -90)
   |> xLine(length = 384.93)
 
 parts = sweep([rectangleSketch, circleSketch], path = sweepPath)

docs/kcl/segAng.md

@@ -32,9 +32,9 @@ exampleSketch = startSketchOn(XZ)
   |> line(end = [10, 0])
   |> line(end = [5, 10], tag = $seg01)
   |> line(end = [-10, 0])
-  |> angledLine([segAng(seg01), 10], %)
+  |> angledLine(angle = segAng(seg01), length = 10)
   |> line(end = [-10, 0])
-  |> angledLine([segAng(seg01), -15], %)
+  |> angledLine(angle = segAng(seg01), length = -15)
   |> close()
 
 example = extrude(exampleSketch, length = 4)

docs/kcl/segLen.md

@@ -29,9 +29,9 @@ segLen(tag: TagIdentifier): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 60, length = 10 }, %, $thing)
-  |> tangentialArc({ offset = -120, radius = 5 }, %)
-  |> angledLine({ angle = -60, length = segLen(thing) }, %)
+  |> angledLine(angle = 60, length = 10, tag = $thing)
+  |> tangentialArc(angle = -120, radius = 5)
+  |> angledLine(angle = -60, length = segLen(thing))
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/settings.md

@@ -6,7 +6,7 @@ layout: manual
 
 # KCL Settings
 
-There are three levels of settings available in the KittyCAD Design Studiolication:
+There are three levels of settings available in Zoo Design Studio:
 
 1. [User Settings](/docs/kcl/settings/user): Global settings that apply to all projects, stored in `user.toml`
 2. [Project Settings](/docs/kcl/settings/project): Settings specific to a project, stored in `project.toml`
@@ -14,7 +14,7 @@ There are three levels of settings available in the KittyCAD Design Studiolicati
 
 ## Configuration Files
 
-The KittyCAD Design Studio uses TOML files for configuration:
+Zoo Design Studio uses TOML files for configuration:
 
 * **User Settings**: `user.toml` - See [complete documentation](/docs/kcl/settings/user)
 * **Project Settings**: `project.toml` - See [complete documentation](/docs/kcl/settings/project)

docs/kcl/settings/user.md

@@ -96,7 +96,7 @@ Permanently dismiss the banner warning to download the desktop app. This setting
 
 ##### stream_idle_mode
 
-When the user is idle, and this is true, the stream will be torn down.
+When the user is idle, teardown the stream after some time.
 
 
 **Default:** None

docs/kcl/shell.md

@@ -103,7 +103,7 @@ case = startSketchOn(-XZ)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArcTo([-size, size], %)
+  |> tangentialArc(endAbsolute = [-size, size])
   |> close()
   |> extrude(length = 65)
 
@@ -128,7 +128,7 @@ case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArcTo([-size, size], %)
+  |> tangentialArc(endAbsolute = [-size, size])
   |> close()
   |> extrude(length = 65)
 
@@ -156,7 +156,7 @@ case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArcTo([-size, size], %)
+  |> tangentialArc(endAbsolute = [-size, size])
   |> close()
   |> extrude(length = 65)
 

docs/kcl/sqrt.md

@@ -33,7 +33,7 @@ sqrt(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 50, length = sqrt(2500) }, %)
+  |> angledLine(angle = 50, length = sqrt(2500))
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-helix.md

@@ -9,7 +9,15 @@ Create a helix.
 
 
 ```js
-helix(revolutions: number(_), angleStart: number(deg), ccw?: bool, radius?: number(mm), axis?: Axis3d | Edge, length?: number(mm), cylinder?: Solid): Helix
+helix(
+  revolutions: number(_),
+  angleStart: number(deg),
+  ccw?: bool,
+  radius?: number(mm),
+  axis?: Axis3d | Edge,
+  length?: number(mm),
+  cylinder?: Solid,
+): Helix
 ```
 
 

docs/kcl/std-math-cos.md

@@ -29,10 +29,10 @@ cos(@num: number(rad)): number(_)
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
+  |> angledLine(
     angle = 30,
     length = 3 / cos(toRadians(30)),
-  }, %)
+  )
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-math-tan.md

@@ -29,10 +29,10 @@ tan(@num: number(rad)): number(_)
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
+  |> angledLine(
     angle = 50,
     length = 50 * tan(1/2),
-  }, %)
+  )
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-sketch-circle.md

@@ -6,10 +6,16 @@ layout: manual
 
 
 
-Construct a 2-dimensional circle, of the specified radius, centered atthe provided (x, y) origin point.
+Construct a 2-dimensional circle, of the specified radius, centered at
+the provided (x, y) origin point.
 
 ```js
-circle(@sketch_or_surface: Sketch | Plane | Face, center: Point2d, radius: number, tag?: tag): Sketch
+circle(
+  @sketch_or_surface: Sketch | Plane | Face,
+  center: Point2d,
+  radius: number,
+  tag?: tag,
+): Sketch
 ```
 
 

docs/kcl/sweep.md

@@ -47,9 +47,9 @@ sweep(
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc({ offset = 90, radius = 5 }, %)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc({ offset = -90, radius = 5 }, %)
+  |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -91,15 +91,9 @@ springSketch = startSketchOn(YZ)
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       50.61
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %)
+  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
@@ -108,7 +102,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
-  |> tangentialArc({ radius = 80, offset = -90 }, %)
+  |> tangentialArc(radius = 80, angle = -90)
   |> xLine(length = 384.93)
 
 sweep([rectangleSketch, circleSketch], path = sweepPath)
@@ -126,7 +120,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
-  |> tangentialArc({ radius = 80, offset = -90 }, %)
+  |> tangentialArc(radius = 80, angle = -90)
   |> xLine(length = 384.93)
 
 sweep(circleSketch, path = sweepPath, sectional = true)

docs/kcl/tangentToEnd.md

@@ -31,12 +31,9 @@ tangentToEnd(tag: TagIdentifier): number
 pillSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [20, 0])
-  |> tangentialArcToRelative([0, 10], %, $arc1)
-  |> angledLine({
-       angle = tangentToEnd(arc1),
-       length = 20
-     }, %)
-  |> tangentialArcToRelative([0, -10], %)
+  |> tangentialArc(end = [0, 10], tag = $arc1)
+  |> angledLine(angle = tangentToEnd(arc1), length = 20)
+  |> tangentialArc(end = [0, -10])
   |> close()
 
 pillExtrude = extrude(pillSketch, length = 10)
@@ -49,12 +46,9 @@ pillExtrude = extrude(pillSketch, length = 10)
 pillSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, 20])
-  |> tangentialArcTo([10, 20], %, $arc1)
-  |> angledLine({
-       angle = tangentToEnd(arc1),
-       length = 20
-     }, %)
-  |> tangentialArcToRelative([-10, 0], %)
+  |> tangentialArc(endAbsolute = [10, 20], tag = $arc1)
+  |> angledLine(angle = tangentToEnd(arc1), length = 20)
+  |> tangentialArc(end = [-10, 0])
   |> close()
 
 pillExtrude = extrude(pillSketch, length = 10)
@@ -66,10 +60,7 @@ pillExtrude = extrude(pillSketch, length = 10)
 rectangleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0], tag = $seg1)
-  |> angledLine({
-       angle = tangentToEnd(seg1),
-       length = 10
-     }, %)
+  |> angledLine(angle = tangentToEnd(seg1), length = 10)
   |> line(end = [0, 10])
   |> line(end = [-20, 0])
   |> close()
@@ -83,7 +74,7 @@ rectangleExtrude = extrude(rectangleSketch, length = 10)
 bottom = startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> arcTo({ end = [10, 10], interior = [5, 1] }, %, $arc1)
-  |> angledLine([tangentToEnd(arc1), 20], %)
+  |> angledLine(angle = tangentToEnd(arc1), length = 20)
   |> close()
 ```
 
@@ -95,7 +86,7 @@ circSketch = startSketchOn(XY)
 
 triangleSketch = startSketchOn(XY)
   |> startProfileAt([-5, 0], %)
-  |> angledLine([tangentToEnd(circ), 10], %)
+  |> angledLine(angle = tangentToEnd(circ), length = 10)
   |> line(end = [-15, 0])
   |> close()
 ```

docs/kcl/tangentialArcTo.md

@@ -35,7 +35,7 @@ tangentialArcTo(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine(angle = 60, length = 10)
   |> tangentialArcTo([15, 15], %)
   |> line(end = [10, -15])
   |> close()

docs/kcl/tangentialArcToRelative.md

@@ -35,7 +35,7 @@ tangentialArcToRelative(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 45, length = 10 }, %)
+  |> angledLine(angle = 45, length = 10)
   |> tangentialArcToRelative([0, -10], %)
   |> line(end = [-10, 0])
   |> close()

docs/kcl/tau.md

@@ -30,7 +30,7 @@ tau(): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 50, length = 10 * tau() }, %)
+  |> angledLine(angle = 50, length = 10 * tau())
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/toDegrees.md

@@ -33,10 +33,7 @@ toDegrees(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = 50,
-       length = 70 * cos(toDegrees(pi() / 4))
-     }, %)
+  |> angledLine(angle = 50, length = 70 * cos(toDegrees(pi() / 4)))
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/toRadians.md

@@ -33,10 +33,7 @@ toRadians(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = 50,
-       length = 70 * cos(toRadians(45))
-     }, %)
+  |> angledLine(angle = 50, length = 70 * cos(toRadians(45)))
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/translate.md

@@ -45,9 +45,9 @@ translate(
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc({ offset = 90, radius = 5 }, %)
+  |> tangentialArc(angle = 90, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc({ offset = -90, radius = 5 }, %)
+  |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -86,15 +86,9 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       50.61
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %)
+  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
@@ -103,7 +97,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
-  |> tangentialArc({ radius = 80, offset = -90 }, %)
+  |> tangentialArc(radius = 80, angle = -90)
   |> xLine(length = 384.93)
 
 parts = sweep([rectangleSketch, circleSketch], path = sweepPath)

docs/kcl/types.md

@@ -184,15 +184,17 @@ way:
 ```norun
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-  |> angledLine({
+  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+  |> angledLine(
        angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
-     }, %, $rectangleSegmentB001)
-  |> angledLine({
+       tag = $rectangleSegmentB001,
+     )
+  |> angledLine(
        angle = segAng(rectangleSegmentA001),
        length = -segLen(rectangleSegmentA001),
-     }, %, $rectangleSegmentC001)
+       tag = $rectangleSegmentC001,
+     )
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 ```
@@ -217,15 +219,17 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
+         length = 196.99,
+         tag = $rectangleSegmentB001,
+       )
+    |> angledLine(
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
+         tag = $rectangleSegmentC001,
+       )
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }
@@ -245,15 +249,17 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
+         length = 196.99,
+         tag = $rectangleSegmentB001,
+       )
+    |> angledLine(
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
+         tag = $rectangleSegmentC001,
+       )
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }

docs/kcl/types/KclValue.md

@@ -252,7 +252,7 @@ Data for an imported geometry.
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `type` |enum: [`ImportedGeometry`](/docs/kcl/types/ImportedGeometry)|  | No |
+| `type` |enum: `ImportedGeometry`|  | No |
 | `id` |[`string`](/docs/kcl/types/string)| The ID of the imported geometry. | No |
 | `value` |`[` [`string`](/docs/kcl/types/string) `]`| The original file paths. | No |
 

docs/kcl/types/PolarCoordsData.md

@@ -1,22 +0,0 @@
----
-title: "PolarCoordsData"
-excerpt: "Data for polar coordinates."
-layout: manual
----
-
-Data for polar coordinates.
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `angle` |[`number`](/docs/kcl/types/number)| The angle of the line (in degrees). | No |
-| `length` |[`number`](/docs/kcl/types/number)| The length of the line. | No |
-
-

docs/kcl/types/tag.md

@@ -14,15 +14,17 @@ way:
 ```js
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-  |> angledLine({
+  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+  |> angledLine(
        angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
-     }, %, $rectangleSegmentB001)
-  |> angledLine({
+       tag = $rectangleSegmentB001,
+     )
+  |> angledLine(
        angle = segAng(rectangleSegmentA001),
        length = -segLen(rectangleSegmentA001),
-     }, %, $rectangleSegmentC001)
+       tag = $rectangleSegmentC001,
+     )
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 ```
@@ -46,15 +48,16 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
+         length = 196.99,
+         tag = $rectangleSegmentB001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
+         length = -segLen(rectangleSegmentA001),
+         tag = $rectangleSegmentC001
+       )
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }
@@ -74,15 +77,15 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001) - 90,
          length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
+       , %, $rectangleSegmentB001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
+       , %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }

docs/kcl/xLine.md

@@ -38,10 +38,10 @@ xLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> xLine(length = 15)
-  |> angledLine({ angle = 80, length = 15 }, %)
+  |> angledLine(angle = 80, length = 15)
   |> line(end = [8, -10])
   |> xLine(length = 10)
-  |> angledLine({ angle = 120, length = 30 }, %)
+  |> angledLine(angle = 120, length = 30)
   |> xLine(length = -15)
   |> close()
 

docs/kcl/yLine.md

@@ -38,7 +38,7 @@ yLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> yLine(length = 15)
-  |> angledLine({ angle = 30, length = 15 }, %)
+  |> angledLine(angle = 30, length = 15)
   |> line(end = [8, -10])
   |> yLine(length = -5)
   |> close()

e2e/playwright/basic-sketch.spec.ts

@@ -137,7 +137,7 @@ async function doBasicSketch(
     await page.waitForTimeout(100)
   }
 
-  await page.getByRole('button', { name: 'Length: open menu' }).click()
+  await page.getByRole('button', { name: 'constraints: open menu' }).click()
   await page.getByRole('button', { name: 'Equal Length' }).click()
 
   // Open the code pane.

e2e/playwright/boolean.spec.ts

@@ -38,7 +38,7 @@ test.describe('Point and click for boolean workflows', () => {
         path.resolve(
           __dirname,
           '../../',
-          './rust/kcl-lib/e2e/executor/inputs/boolean-setup-with'
+          './rust/kcl-lib/e2e/executor/inputs/boolean-setup-with-sketch-on-faces.kcl'
         ),
         'utf-8'
       )
@@ -46,8 +46,6 @@ test.describe('Point and click for boolean workflows', () => {
         localStorage.setItem('persistCode', file)
       }, file)
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
-
       await scene.settled(cmdBar)
 
       // Test coordinates for selection - these might need adjustment based on actual scene layout
@@ -77,6 +75,7 @@ test.describe('Point and click for boolean workflows', () => {
 
         // Select first object in the scene, expect there to be a pixel diff from the selection color change
         await clickFirstObject({ pixelDiff: 50 })
+        await page.waitForTimeout(1000)
 
         // For subtract, we need to proceed to the next step before selecting the second object
         if (operationName !== 'subtract') {
@@ -87,6 +86,8 @@ test.describe('Point and click for boolean workflows', () => {
         // Select second object
         await clickSecondObject({ pixelDiff: 50 })
 
+        await page.waitForTimeout(1000)
+
         // Confirm the operation in the command bar
         await cmdBar.progressCmdBar()
 

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -4,6 +4,7 @@ import { uuidv4 } from '@src/lib/utils'
 
 import type { HomePageFixture } from '@e2e/playwright/fixtures/homePageFixture'
 import type { SceneFixture } from '@e2e/playwright/fixtures/sceneFixture'
+import type { ToolbarFixture } from '@e2e/playwright/fixtures/toolbarFixture'
 import { getUtils } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
 
@@ -15,6 +16,7 @@ test.describe(
       page: Page,
       homePage: HomePageFixture,
       scene: SceneFixture,
+      toolbar: ToolbarFixture,
       plane: string,
       clickCoords: { x: number; y: number }
     ) => {
@@ -59,9 +61,12 @@ test.describe(
       await u.sendCustomCmd(updateCamCommand)
 
       await u.closeDebugPanel()
+
       await page.mouse.click(clickCoords.x, clickCoords.y)
       await page.waitForTimeout(600) // wait for animation
 
+      await toolbar.waitUntilSketchingReady()
+
       await expect(
         page.getByRole('button', { name: 'line Line', exact: true })
       ).toBeVisible()
@@ -117,11 +122,12 @@ test.describe(
     ]
 
     for (const config of planeConfigs) {
-      test(config.plane, async ({ page, homePage, scene }) => {
+      test(config.plane, async ({ page, homePage, scene, toolbar }) => {
         await sketchOnPlaneAndBackSideTest(
           page,
           homePage,
           scene,
+          toolbar,
           config.plane,
           config.coords
         )

e2e/playwright/code-pane-and-errors.spec.ts

@@ -15,6 +15,7 @@ test.describe('Code pane and errors', { tag: ['@skipWin'] }, () => {
     page,
     homePage,
     scene,
+    cmdBar,
   }) => {
     const u = await getUtils(page)
 
@@ -36,7 +37,7 @@ extrude001 = extrude(sketch001, length = 5)`
 
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // Ensure no badge is present
     const codePaneButtonHolder = page.locator('#code-button-holder')
@@ -171,6 +172,8 @@ extrude001 = extrude(sketch001, length = 5)`
     context,
     page,
     homePage,
+    scene,
+    cmdBar,
   }) => {
     // Load the app with the working starter code
     await context.addInitScript((code) => {
@@ -180,9 +183,7 @@ extrude001 = extrude(sketch001, length = 5)`
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
 
-    // FIXME: await scene.waitForExecutionDone() does not work. It still fails.
-    // I needed to increase this timeout to get this to pass.
-    await page.waitForTimeout(10000)
+    await scene.settled(cmdBar)
 
     // Ensure badge is present
     const codePaneButtonHolder = page.locator('#code-button-holder')

e2e/playwright/command-bar-tests.spec.ts

@@ -317,9 +317,13 @@ test.describe('Command bar tests', { tag: ['@skipWin'] }, () => {
   test('Can switch between sketch tools via command bar', async ({
     page,
     homePage,
+    scene,
+    cmdBar,
+    toolbar,
   }) => {
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
+    await scene.settled(cmdBar)
 
     const sketchButton = page.getByRole('button', { name: 'Start Sketch' })
     const cmdBarButton = page.getByRole('button', { name: 'Commands' })
@@ -343,7 +347,9 @@ test.describe('Command bar tests', { tag: ['@skipWin'] }, () => {
 
     // Start a sketch
     await sketchButton.click()
+
     await page.mouse.click(700, 200)
+    await toolbar.waitUntilSketchingReady()
 
     // Switch between sketch tools via the command bar
     await expect(lineToolButton).toHaveAttribute('aria-pressed', 'true')

e2e/playwright/desktop-export.spec.ts

@@ -11,7 +11,7 @@ import { expect, test } from '@e2e/playwright/zoo-test'
 test(
   'export works on the first try',
   { tag: ['@electron', '@skipLocalEngine'] },
-  async ({ page, context, scene, tronApp }, testInfo) => {
+  async ({ page, context, scene, tronApp, cmdBar }, testInfo) => {
     if (!tronApp) {
       fail()
     }
@@ -32,53 +32,41 @@ test(
     })
     await page.setBodyDimensions({ width: 1200, height: 500 })
 
-    page.on('console', console.log)
-
     await test.step('on open of project', async () => {
-      await expect(page.getByText(`bracket`)).toBeVisible()
+      // Open the project
+      const projectName = page.getByText(`bracket`)
+      await expect(projectName).toBeVisible()
+      await projectName.click()
+      await scene.settled(cmdBar)
 
-      // open the project
-      await page.getByText(`bracket`).click()
-
-      // expect zero errors in guter
+      // Expect zero errors in gutter
       await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
 
-      // export the model
+      // Click the export button
       const exportButton = page.getByTestId('export-pane-button')
       await expect(exportButton).toBeVisible()
-
-      await scene.waitForExecutionDone()
-
-      const gltfOption = page.getByText('glTF')
-      const submitButton = page.getByText('Confirm Export')
-      const exportingToastMessage = page.getByText(`Exporting...`)
-      const errorToastMessage = page.getByText(`Error while exporting`)
-      const engineErrorToastMessage = page.getByText(`Nothing to export`)
-      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
-      // The open file's name is `main.kcl`, so the export file name should be `main.gltf`
-      const exportFileName = `main.gltf`
-
-      // Click the export button
       await exportButton.click()
 
+      // Select the first format option
+      const gltfOption = cmdBar.selectOption({ name: 'glTF' })
+      const exportFileName = `main.gltf` // source file is named `main.kcl`
       await expect(gltfOption).toBeVisible()
-      await expect(page.getByText('STL')).toBeVisible()
-
       await page.keyboard.press('Enter')
 
       // Click the checkbox
+      const submitButton = page.getByText('Confirm Export')
       await expect(submitButton).toBeVisible()
-
-      await page.waitForTimeout(500)
-
       await page.keyboard.press('Enter')
 
-      // Find the toast.
       // Look out for the toast message
+      const exportingToastMessage = page.getByText(`Exporting...`)
+      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
       await expect(exportingToastMessage).toBeVisible()
       await expect(alreadyExportingToastMessage).not.toBeVisible()
 
-      // Expect it to succeed.
+      // Expect it to succeed
+      const errorToastMessage = page.getByText(`Error while exporting`)
+      const engineErrorToastMessage = page.getByText(`Nothing to export`)
       await expect(errorToastMessage).not.toBeVisible()
       await expect(engineErrorToastMessage).not.toBeVisible()
 
@@ -86,6 +74,7 @@ test(
       await expect(successToastMessage).toBeVisible()
       await expect(exportingToastMessage).not.toBeVisible()
 
+      // Check for the exported file
       const firstFileFullPath = path.resolve(
         getPlaywrightDownloadDir(tronApp.projectDirName),
         exportFileName
@@ -112,60 +101,50 @@ test(
       const u = await getUtils(page)
       await u.openFilePanel()
 
+      // Click on the other file
       const otherKclButton = page.getByRole('button', { name: 'other.kcl' })
-
-      // Click the file
       await otherKclButton.click()
 
       // Close the file pane
       await u.closeFilePanel()
+      await scene.settled(cmdBar)
 
-      // FIXME: await scene.waitForExecutionDone() does not work. The modeling indicator stays in -receive-reliable and not execution done
-      await page.waitForTimeout(10000)
-
-      // expect zero errors in guter
+      // Expect zero errors in gutter
       await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
 
-      // export the model
+      // Click the export button
       const exportButton = page.getByTestId('export-pane-button')
       await expect(exportButton).toBeVisible()
-
-      const gltfOption = page.getByText('glTF')
-      const submitButton = page.getByText('Confirm Export')
-      const exportingToastMessage = page.getByText(`Exporting...`)
-      const errorToastMessage = page.getByText(`Error while exporting`)
-      const engineErrorToastMessage = page.getByText(`Nothing to export`)
-      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
-      // The open file's name is `other.kcl`, so the export file name should be `other.gltf`
-      const exportFileName = `other.gltf`
-
-      // Click the export button
       await exportButton.click()
 
+      // Select the first format option
+      const gltfOption = cmdBar.selectOption({ name: 'glTF' })
+      const exportFileName = `other.gltf` // source file is named `other.kcl`
       await expect(gltfOption).toBeVisible()
-      await expect(page.getByText('STL')).toBeVisible()
-
       await page.keyboard.press('Enter')
 
       // Click the checkbox
+      const submitButton = page.getByText('Confirm Export')
       await expect(submitButton).toBeVisible()
-
       await page.keyboard.press('Enter')
 
-      // Find the toast.
       // Look out for the toast message
+      const exportingToastMessage = page.getByText(`Exporting...`)
+      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
       await expect(exportingToastMessage).toBeVisible()
+      await expect(alreadyExportingToastMessage).not.toBeVisible()
+
+      // Expect it to succeed
+      const errorToastMessage = page.getByText(`Error while exporting`)
+      const engineErrorToastMessage = page.getByText(`Nothing to export`)
+      await expect(errorToastMessage).not.toBeVisible()
+      await expect(engineErrorToastMessage).not.toBeVisible()
 
       const successToastMessage = page.getByText(`Exported successfully`)
-      await test.step('Check the success toast message shows and nothing else', async () =>
-        Promise.all([
-          expect(alreadyExportingToastMessage).not.toBeVisible(),
-          expect(errorToastMessage).not.toBeVisible(),
-          expect(engineErrorToastMessage).not.toBeVisible(),
-          expect(successToastMessage).toBeVisible(),
-          expect(exportingToastMessage).not.toBeVisible(),
-        ]))
+      await expect(successToastMessage).toBeVisible()
+      await expect(exportingToastMessage).not.toBeVisible()
 
+      // Check for the exported file=
       const secondFileFullPath = path.resolve(
         getPlaywrightDownloadDir(tronApp.projectDirName),
         exportFileName

e2e/playwright/editor-tests.spec.ts

@@ -78,12 +78,14 @@ sketch001 = startSketchOn(XY)
 
     // Ensure we execute the first time.
     await u.openDebugPanel()
-    await expect(
-      page.locator('[data-receive-command-type="scene_clear_all"]')
-    ).toHaveCount(1)
-    await expect(
-      page.locator('[data-message-type="execution-done"]')
-    ).toHaveCount(2)
+    await expect
+      .poll(() =>
+        page.locator('[data-receive-command-type="scene_clear_all"]').count()
+      )
+      .toBe(1)
+    await expect
+      .poll(() => page.locator('[data-message-type="execution-done"]').count())
+      .toBe(2)
 
     // Add whitespace to the end of the code.
     await u.codeLocator.click()
@@ -110,12 +112,14 @@ sketch001 = startSketchOn(XY)
   test('ensure we use the cache, and do not clear on append', async ({
     homePage,
     page,
+    scene,
+    cmdBar,
   }) => {
     const u = await getUtils(page)
     await page.setBodyDimensions({ width: 1000, height: 500 })
 
     await homePage.goToModelingScene()
-    await u.waitForPageLoad()
+    await scene.settled(cmdBar)
 
     await u.codeLocator.click()
     await page.keyboard.type(`sketch001 = startSketchOn(XY)
@@ -499,7 +503,7 @@ sketch_001 = startSketchOn(XY)
     await page.keyboard.press('ArrowLeft')
     await page.keyboard.press('ArrowRight')
 
-    await scene.waitForExecutionDone()
+    await scene.connectionEstablished()
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-info').first()).toBeVisible()
@@ -916,7 +920,7 @@ sketch001 = startSketchOn(XZ)
         `sketch001 = startSketchOn(XZ)
   |> startProfileAt([4.61, -14.01], %)
   |> line(end = [12.73, -0.09])
-  |> tangentialArcTo([24.95, -5.38], %)
+  |> tangentialArc(endAbsolute = [24.95, -5.38])
   |> close()`
       )
     })
@@ -965,7 +969,7 @@ sketch001 = startSketchOn(XZ)
 
     // expect the code to have changed
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn(XZ)  |> startProfileAt([4.61, -14.01], %)  |> line(end = [12.73, -0.09])  |> tangentialArcTo([24.95, -5.38], %)  |> close()extrude001 = extrude(sketch001, length = 5)`
+      `sketch001 = startSketchOn(XZ)  |> startProfileAt([4.61, -14.01], %)  |> line(end = [12.73, -0.09])  |> tangentialArc(endAbsolute = [24.95, -5.38])  |> close()extrude001 = extrude(sketch001, length = 5)`
     )
 
     // Now hit undo
@@ -978,7 +982,7 @@ sketch001 = startSketchOn(XZ)
       .toHaveText(`sketch001 = startSketchOn(XZ)
   |> startProfileAt([4.61, -14.01], %)
   |> line(end = [12.73, -0.09])
-  |> tangentialArcTo([24.95, -5.38], %)
+  |> tangentialArc(endAbsolute = [24.95, -5.38])
   |> close()`)
   })
 
@@ -994,7 +998,7 @@ sketch001 = startSketchOn(XZ)
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([4.61, -10.01], %)
   |> line(end = [12.73, -0.09])
-  |> tangentialArcTo([24.95, -0.38], %)
+  |> tangentialArc(endAbsolute = [24.95, -0.38])
   |> close()
   |> extrude(length = 5)`
         )
@@ -1068,7 +1072,7 @@ sketch001 = startSketchOn(XZ)
       // we wait so it saves the code
       await page.waitForTimeout(800)
 
-      // drag tangentialArcTo handle
+      // drag tangentialArc handle
       const tangentEnd = await u.getBoundingBox('[data-overlay-index="1"]')
       await page.dragAndDrop('#stream', '#stream', {
         sourcePosition: { x: tangentEnd.x + 10, y: tangentEnd.y - 5 },
@@ -1085,7 +1089,7 @@ sketch001 = startSketchOn(XZ)
         `sketch001 = startSketchOn(XZ)
     |> startProfileAt([2.71, -2.71], %)
     |> line(end = [15.4, -2.78])
-    |> tangentialArcTo([27.6, -3.05], %)
+    |> tangentialArc(endAbsolute = [27.6, -3.05])
     |> close()
     |> extrude(length = 5)`,
         { shouldNormalise: true }
@@ -1100,7 +1104,7 @@ sketch001 = startSketchOn(XZ)
         `sketch001 = startSketchOn(XZ)
     |> startProfileAt([2.71, -2.71], %)
     |> line(end = [15.4, -2.78])
-    |> tangentialArcTo([24.95, -0.38], %)
+    |> tangentialArc(endAbsolute = [24.95, -0.38])
     |> close()
     |> extrude(length = 5)`,
         { shouldNormalise: true }
@@ -1115,7 +1119,7 @@ sketch001 = startSketchOn(XZ)
         `sketch001 = startSketchOn(XZ)
     |> startProfileAt([2.71, -2.71], %)
     |> line(end = [12.73, -0.09])
-    |> tangentialArcTo([24.95, -0.38], %)
+    |> tangentialArc(endAbsolute = [24.95, -0.38])
     |> close()
     |> extrude(length = 5)`,
         { shouldNormalise: true }
@@ -1131,7 +1135,7 @@ sketch001 = startSketchOn(XZ)
         `sketch001 = startSketchOn(XZ)
     |> startProfileAt([4.61, -10.01], %)
     |> line(end = [12.73, -0.09])
-    |> tangentialArcTo([24.95, -0.38], %)
+    |> tangentialArc(endAbsolute = [24.95, -0.38])
     |> close()
     |> extrude(length = 5)`,
         { shouldNormalise: true }
@@ -1140,7 +1144,7 @@ sketch001 = startSketchOn(XZ)
   )
 
   test(
-    `Can use the import stdlib function on a local OBJ file`,
+    `Can import a local OBJ file`,
     { tag: '@electron' },
     async ({ page, context }, testInfo) => {
       test.fixme(orRunWhenFullSuiteEnabled())
@@ -1190,7 +1194,7 @@ sketch001 = startSketchOn(XZ)
           .toBeLessThan(15)
       })
       await test.step(`Write the import function line`, async () => {
-        await u.codeLocator.fill(`import('cube.obj')`)
+        await u.codeLocator.fill(`import 'cube.obj'\ncube`)
         await page.waitForTimeout(800)
       })
       await test.step(`Reset the camera before checking`, async () => {
@@ -1315,4 +1319,85 @@ sketch001 = startSketchOn(XZ)
     const element = page.locator('[data-overlay-index="1"]')
     await expect(element).toHaveAttribute('data-overlay-visible', 'true')
   })
+
+  test(`Only show axis planes when there are no errors`, async ({
+    page,
+    homePage,
+    scene,
+    cmdBar,
+  }) => {
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'persistCode',
+        `sketch001 = startSketchOn(XZ)
+    profile001 = circle(sketch001, center = [-100.0, -100.0], radius = 50.0)
+
+    sketch002 = startSketchOn(XZ)
+    profile002 = circle(sketch002, center = [-100.0, 100.0], radius = 50.0)
+    extrude001 = extrude(profile002, length = 0)` // length = 0 is causing the error
+      )
+    })
+
+    const viewportSize = { width: 1200, height: 800 }
+    await page.setBodyDimensions(viewportSize)
+
+    await homePage.goToModelingScene()
+
+    await scene.connectionEstablished()
+    await scene.settled(cmdBar)
+
+    await scene.expectPixelColor(
+      TEST_COLORS.DARK_MODE_BKGD,
+      // This is a position where the blue part of the axis plane is visible if its rendered
+      { x: viewportSize.width * 0.75, y: viewportSize.height * 0.2 },
+      15
+    )
+  })
+
+  test(`test-toolbar-buttons`, async ({
+    page,
+    homePage,
+    toolbar,
+    scene,
+    cmdBar,
+  }) => {
+    await test.step('Load an empty file', async () => {
+      await page.addInitScript(async () => {
+        localStorage.setItem('persistCode', '')
+      })
+      await page.setBodyDimensions({ width: 1200, height: 500 })
+      await homePage.goToModelingScene()
+
+      // wait until scene is ready to be interacted with
+      await scene.connectionEstablished()
+      await scene.settled(cmdBar)
+    })
+
+    await test.step('Test toolbar button correct selection', async () => {
+      await toolbar.expectToolbarMode.toBe('modeling')
+
+      await toolbar.startSketchPlaneSelection()
+
+      // Click on a default plane
+      await page.mouse.click(700, 200)
+
+      // tools cannot be selected immediately, couldn't find an event to await instead.
+      await page.waitForTimeout(1000)
+
+      await toolbar.selectCenterRectangle()
+
+      await expect(page.getByTestId('center-rectangle')).toHaveAttribute(
+        'aria-pressed',
+        'true'
+      )
+    })
+
+    await test.step('Test Toolbar dropdown remembering last selection', async () => {
+      // Select another tool
+      await page.getByTestId('circle-center').click()
+
+      // center-rectangle should still be the active option in the rectangle dropdown
+      await expect(page.getByTestId('center-rectangle')).toBeVisible()
+    })
+  })
 })

e2e/playwright/feature-tree-pane.spec.ts

@@ -19,7 +19,7 @@ length001 = timesFive(1) * 5
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([20, 10], %)
   |> line(end = [10, 10])
-  |> angledLine([-45, length001], %)
+  |> angledLine(angle = -45, length = length001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 revolve001 = revolve(sketch001, axis = X)
@@ -38,15 +38,9 @@ extrude001 = extrude(sketch002, length = 10)
 
 const FEATURE_TREE_SKETCH_CODE = `sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine([0, 4], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       2
-     ], %, $rectangleSegmentB001)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %, $rectangleSegmentC001)
+  |> angledLine(angle = 0, length = 4, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2, tag = $rectangleSegmentB001)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close(%)
 extrude001 = extrude(sketch001, length = 10)
@@ -64,7 +58,7 @@ test.describe('Feature Tree pane', () => {
   test(
     'User can go to definition and go to function definition',
     { tag: '@electron' },
-    async ({ context, homePage, scene, editor, toolbar }) => {
+    async ({ context, homePage, scene, editor, toolbar, cmdBar, page }) => {
       await context.folderSetupFn(async (dir) => {
         const bracketDir = join(dir, 'test-sample')
         await fsp.mkdir(bracketDir, { recursive: true })
@@ -86,9 +80,13 @@ test.describe('Feature Tree pane', () => {
           sortBy: 'last-modified-desc',
         })
         await homePage.openProject('test-sample')
-        await scene.waitForExecutionDone()
-        await editor.closePane()
+        await scene.connectionEstablished()
+        await scene.settled(cmdBar)
+
         await toolbar.openFeatureTreePane()
+        await expect
+          .poll(() => page.getByText('Feature tree').count())
+          .toBeGreaterThan(1)
       })
 
       async function testViewSource({
@@ -254,7 +252,7 @@ test.describe('Feature Tree pane', () => {
         sortBy: 'last-modified-desc',
       })
       await homePage.openProject('test-sample')
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
       await toolbar.openFeatureTreePane()
     })
 
@@ -339,7 +337,7 @@ test.describe('Feature Tree pane', () => {
         sortBy: 'last-modified-desc',
       })
       await homePage.openProject('test-sample')
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
       await toolbar.openFeatureTreePane()
     })
 
@@ -414,8 +412,7 @@ profile003 = startProfileAt([0, -4.93], sketch001)
     const planeColor: [number, number, number] = [74, 74, 74]
 
     await homePage.openProject('test-sample')
-    // FIXME: @lf94 has a better way to verify execution completion, in a PR rn
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     await test.step(`Verify we see the sketch`, async () => {
       await scene.expectPixelColor(sketchColor, testPoint, 10)

e2e/playwright/file-tree.spec.ts

@@ -47,6 +47,7 @@ test.describe('integrations tests', () => {
         await scene.connectionEstablished()
         await scene.settled(cmdBar)
         await clickObj()
+        await page.waitForTimeout(1000)
         await scene.moveNoWhere()
         await editor.expectState({
           activeLines: [
@@ -72,11 +73,11 @@ test.describe('integrations tests', () => {
       })
       await test.step('setup for next assertion', async () => {
         await toolbar.openFile('main.kcl')
-
-        await scene.settled(cmdBar)
-
+        await page.waitForTimeout(1000)
         await clickObj()
+        await page.waitForTimeout(1000)
         await scene.moveNoWhere()
+        await page.waitForTimeout(1000)
         await editor.expectState({
           activeLines: [
             '|>startProfileAt([75.8,317.2],%)//[$startCapTag,$EndCapTag]',
@@ -89,7 +90,7 @@ test.describe('integrations tests', () => {
         await toolbar.expectFileTreeState(['main.kcl', fileName])
       })
       await test.step('check sketch mode is exited when opening a different file', async () => {
-        await toolbar.openFile(fileName, { wait: false })
+        await toolbar.openFile(fileName)
 
         // check we're out of sketch mode
         await expect(toolbar.exitSketchBtn).not.toBeVisible()

e2e/playwright/fixtures/cmdBarFixture.ts

@@ -112,22 +112,16 @@ export class CmdBarFixture {
    * and assumes we are past the `pickCommand` step.
    */
   progressCmdBar = async (shouldFuzzProgressMethod = true) => {
-    // FIXME: Progressing the command bar is a race condition. We have an async useEffect that reports the final state via useCalculateKclExpression. If this does not run quickly enough, it will not "fail" the continue because you can press continue if the state is not ready. E2E tests do not know this.
-    // Wait 1250ms to assume the await executeAst of the KCL input field is finished
-    await this.page.waitForTimeout(1250)
-    if (shouldFuzzProgressMethod || Math.random() > 0.5) {
-      const arrowButton = this.page.getByRole('button', {
-        name: 'arrow right Continue',
-      })
-      if (await arrowButton.isVisible()) {
-        await arrowButton.click()
-      } else {
-        await this.page
-          .getByRole('button', { name: 'checkmark Submit command' })
-          .click()
-      }
+    await this.page.waitForTimeout(2000)
+    const arrowButton = this.page.getByRole('button', {
+      name: 'arrow right Continue',
+    })
+    if (await arrowButton.isVisible()) {
+      await arrowButton.click()
     } else {
-      await this.page.keyboard.press('Enter')
+      await this.page
+        .getByRole('button', { name: 'checkmark Submit command' })
+        .click()
     }
   }
 

e2e/playwright/fixtures/fixtureSetup.ts

@@ -39,7 +39,8 @@ export class AuthenticatedApp {
   }
 
   async initialise(code = '') {
-    await setup(this.context, this.page, this.testInfo)
+    const testDir = this.testInfo.outputPath('electron-test-projects-dir')
+    await setup(this.context, this.page, testDir, this.testInfo)
     const u = await getUtils(this.page)
 
     await this.page.addInitScript(async (code) => {
@@ -102,11 +103,11 @@ export class ElectronZoo {
             return resolve(undefined)
           }
 
-          if (Date.now() - timeA > 10000) {
+          if (Date.now() - timeA > 3000) {
             return resolve(undefined)
           }
 
-          setTimeout(checkDisconnected, 0)
+          setTimeout(checkDisconnected, 1)
         }
         checkDisconnected()
       })
@@ -128,11 +129,9 @@ export class ElectronZoo {
     const that = this
 
     const options = {
-      timeout: 120000,
       args: ['.', '--no-sandbox'],
       env: {
         ...process.env,
-        TEST_SETTINGS_FILE_KEY: this.projectDirName,
         IS_PLAYWRIGHT: 'true',
       },
       ...(process.env.ELECTRON_OVERRIDE_DIST_PATH
@@ -200,7 +199,14 @@ export class ElectronZoo {
 
     await this.context.tracing.startChunk()
 
-    await setup(this.context, this.page, testInfo)
+    // THIS IS ABSOLUTELY NECESSARY TO CHANGE THE PROJECT DIRECTORY BETWEEN
+    // TESTS BECAUSE OF THE ELECTRON INSTANCE REUSE.
+    await this.electron?.evaluate(({ app }, projectDirName) => {
+      // @ts-ignore can't declaration merge see main.ts
+      app.testProperty['TEST_SETTINGS_FILE_KEY'] = projectDirName
+    }, this.projectDirName)
+
+    await setup(this.context, this.page, this.projectDirName, testInfo)
 
     await this.cleanProjectDir()
 
@@ -250,11 +256,6 @@ export class ElectronZoo {
     //   return app.reuseWindowForTest();
     // });
 
-    await this.electron?.evaluate(({ app }, projectDirName) => {
-      // @ts-ignore can't declaration merge see main.ts
-      app.testProperty['TEST_SETTINGS_FILE_KEY'] = projectDirName
-    }, this.projectDirName)
-
     // Always start at the root view
     await this.page.goto(this.firstUrl)
 
@@ -278,8 +279,9 @@ export class ElectronZoo {
       // Not a problem if it already exists.
     }
 
-    const tempSettingsFilePath = path.join(
+    const tempSettingsFilePath = path.resolve(
       this.projectDirName,
+      '..',
       SETTINGS_FILE_NAME
     )
 

e2e/playwright/fixtures/homePageFixture.ts

@@ -99,7 +99,6 @@ export class HomePageFixture {
   createAndGoToProject = async (projectTitle = 'untitled') => {
     await this.projectsLoaded()
     await this.projectButtonNew.click()
-    await this.projectTextName.click()
     await this.projectTextName.fill(projectTitle)
     await this.projectButtonContinue.click()
   }

e2e/playwright/fixtures/sceneFixture.ts

@@ -43,21 +43,15 @@ type DragFromHandler = (
 export class SceneFixture {
   public page: Page
   public streamWrapper!: Locator
-  public loadingIndicator!: Locator
   public networkToggleConnected!: Locator
   public startEditSketchBtn!: Locator
 
-  get exeIndicator() {
-    return this.page
-      .getByTestId('model-state-indicator-execution-done')
-      .or(this.page.getByTestId('model-state-indicator-receive-reliable'))
-  }
-
   constructor(page: Page) {
     this.page = page
     this.streamWrapper = page.getByTestId('stream')
-    this.networkToggleConnected = page.getByTestId('network-toggle-ok')
-    this.loadingIndicator = this.streamWrapper.getByTestId('loading')
+    this.networkToggleConnected = page
+      .getByTestId('network-toggle-ok')
+      .or(page.getByTestId('network-toggle-other'))
     this.startEditSketchBtn = page
       .getByRole('button', { name: 'Start Sketch' })
       .or(page.getByRole('button', { name: 'Edit Sketch' }))
@@ -231,10 +225,6 @@ export class SceneFixture {
     }
   }
 
-  waitForExecutionDone = async () => {
-    await expect(this.exeIndicator).toBeVisible({ timeout: 30000 })
-  }
-
   connectionEstablished = async () => {
     const timeout = 30000
     await expect(this.networkToggleConnected).toBeVisible({ timeout })
@@ -243,6 +233,9 @@ export class SceneFixture {
   settled = async (cmdBar: CmdBarFixture) => {
     const u = await getUtils(this.page)
 
+    await expect(this.startEditSketchBtn).not.toBeDisabled({ timeout: 15_000 })
+    await expect(this.startEditSketchBtn).toBeVisible()
+
     await cmdBar.openCmdBar()
     await cmdBar.chooseCommand('Settings · app · show debug panel')
     await cmdBar.selectOption({ name: 'on' }).click()
@@ -250,10 +243,6 @@ export class SceneFixture {
     await u.openDebugPanel()
     await u.expectCmdLog('[data-message-type="execution-done"]')
     await u.closeDebugPanel()
-
-    await this.waitForExecutionDone()
-    await expect(this.startEditSketchBtn).not.toBeDisabled()
-    await expect(this.startEditSketchBtn).toBeVisible()
   }
 
   expectPixelColor = async (