tests fixups

Signed-off-by: Nick Cameron <nrc@ncameron.org>

.github/workflows/build-wasm.yml

@@ -1,56 +0,0 @@
-name: Build WASM
-
-on:
-  workflow_call:
-
-permissions:
-  contents: read
-
-jobs:
-  npm-build-wasm:
-    runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
-    steps:
-      - uses: actions/checkout@v4
-
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'npm'
-
-      - name: Install dependencies
-        run: npm install
-
-      - name: Use correct Rust toolchain
-        shell: bash
-        run: |
-          [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
-
-      - name: Install rust
-        uses: actions-rust-lang/setup-rust-toolchain@v1
-        with:
-          cache: false # configured below
-
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
-        with:
-          tool: wasm-pack
-
-      - name: Use Rust cache
-        uses: Swatinem/rust-cache@v2
-        with:
-          workspaces: './rust'
-
-      - name: Build Wasm
-        shell: bash
-        run: npm run build:wasm
-
-      - uses: actions/upload-artifact@v4
-        with:
-          name: prepared-wasm
-          path: |
-            rust/kcl-wasm-lib/pkg/kcl_wasm_lib*
-
-      - uses: actions/upload-artifact@v4
-        with:
-          name: prepared-ts-rs-bindings
-          path: |
-            rust/kcl-lib/bindings/*

.github/workflows/cargo-test.yml

@@ -88,7 +88,6 @@ jobs:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN_DEV}}
           ZOO_HOST: https://api.dev.zoo.dev
           RUST_BACKTRACE: full
-          RUST_MIN_STACK: 10485760000
       - name: Commit differences
         if: steps.path-changes.outputs.outside-kcl-samples == 'false' && steps.cargo-test-kcl-samples.outcome == 'failure'
         shell: bash
@@ -120,7 +119,6 @@ jobs:
           # Configure nextest when it's run by insta (via just).
           NEXTEST_PROFILE: ci
           RUST_BACKTRACE: full
-          RUST_MIN_STACK: 10485760000
       - name: Build and archive tests
         run: |
           cd rust
@@ -157,7 +155,7 @@ jobs:
         shell: bash
         run: |
           [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
-      - name: Install Rust
+      - name: Install rust
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
@@ -184,7 +182,6 @@ jobs:
         env:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN_DEV}}
           ZOO_HOST: https://api.dev.zoo.dev
-          RUST_MIN_STACK: 10485760000
       - name: Upload results
         if: always()
         run: .github/ci-cd-scripts/upload-results.sh
@@ -193,55 +190,6 @@ jobs:
           TAB_API_KEY: ${{ secrets.TAB_API_KEY }}
           CI_COMMIT_SHA: ${{ github.event.pull_request.head.sha }}
           CI_PR_NUMBER: ${{ github.event.pull_request.number }}
-  run-internal-kcl-samples:
-    name: cargo test (internal-kcl-samples)
-    runs-on:
-      - runs-on=${{ github.run_id }}
-      - runner=32cpu-linux-x64
-      - extras=s3-cache
-    steps:
-      - uses: runs-on/action@v1
-      - uses: actions/create-github-app-token@v1
-        id: app-token
-        with:
-          app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
-          private-key: ${{ secrets.MODELING_APP_GH_APP_PRIVATE_KEY }}
-          owner: ${{ github.repository_owner }}
-      - uses: actions/checkout@v4
-        with:
-          token: ${{ steps.app-token.outputs.token }}
-      - name: Use correct Rust toolchain
-        shell: bash
-        run: |
-          [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
-      - name: Install Rust
-        uses: actions-rust-lang/setup-rust-toolchain@v1
-        with:
-          cache: false # Configured below.
-      - name: Start Vector
-        run: .github/ci-cd-scripts/start-vector-ubuntu.sh
-        env:
-          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
-          OS_NAME: ${{ env.OS_NAME }}
-      - uses: taiki-e/install-action@nextest
-      - name: Download internal KCL samples
-        run: git clone --depth=1 https://x-access-token:${{ secrets.GH_PAT_KCL_SAMPLES_INTERNAL }}@github.com/KittyCAD/kcl-samples-internal public/kcl-samples/internal
-      - name: Run tests
-        shell: bash
-        run: |-
-          cd rust/kcl-lib
-          cargo nextest run \
-           --retries=10 --no-fail-fast --features artifact-graph --profile=ci \
-           internal \
-           2>&1 | tee /tmp/github-actions.log
-        env:
-          TWENTY_TWENTY: overwrite
-          INSTA_UPDATE: always
-          EXPECTORATE: overwrite
-          KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN_DEV}}
-          ZOO_HOST: https://api.dev.zoo.dev
-          MODELING_APP_INTERNAL_SAMPLES_SECRET: ${{secrets.MODELING_APP_INTERNAL_SAMPLES_SECRET}}
-          RUST_MIN_STACK: 10485760000
   run-wasm-tests:
     name: Run wasm tests
     strategy:

.github/workflows/e2e-tests.yml

@@ -167,6 +167,32 @@ jobs:
           retention-days: 30
           overwrite: true
 
+      - name: Check diff
+        if: ${{ github.ref != 'refs/heads/main' }}
+        shell: bash
+        id: git-check
+        run: |
+            git add e2e/playwright/snapshot-tests.spec.ts-snapshots e2e/playwright/snapshots
+            if git status | grep -q "Changes to be committed"
+            then echo "modified=true" >> $GITHUB_OUTPUT
+            else echo "modified=false" >> $GITHUB_OUTPUT
+            fi
+
+      - name: Commit changes
+        if: ${{ steps.git-check.outputs.modified == 'true' }}
+        shell: bash
+        run: |
+          git add e2e/playwright/snapshot-tests.spec.ts-snapshots e2e/playwright/snapshots
+          git config --local user.email "github-actions[bot]@users.noreply.github.com"
+          git config --local user.name "github-actions[bot]"
+          git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
+          git fetch origin
+          echo ${{ github.head_ref }}
+          git checkout ${{ github.head_ref }}
+          git commit --message "Update snapshots" || true
+          git push
+          git push origin ${{ github.head_ref }}
+
   electron:
     needs: [prepare-wasm]
     timeout-minutes: 60

.github/workflows/kcl-language-server.yml

@@ -21,11 +21,14 @@ on:
       - '**.rs'
       - .github/workflows/kcl-language-server.yml
   workflow_dispatch:
+
 permissions:
   contents: read
+
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
+
 env:
   CARGO_INCREMENTAL: 0
   CARGO_NET_RETRY: 10
@@ -35,9 +38,10 @@ env:
   MACOSX_DEPLOYMENT_TARGET: 10.15
   CARGO_TARGET_AARCH64_UNKNOWN_LINUX_GNU_LINKER: aarch64-linux-gnu-gcc
   CARGO_TARGET_ARM_UNKNOWN_LINUX_GNUEABIHF_LINKER: arm-linux-gnueabihf-gcc
+
 jobs:
   test:
-    name: kcl-language-server (vscode tests)
+    name: vscode tests
     strategy:
       fail-fast: false
       matrix:
@@ -73,7 +77,8 @@ jobs:
         include:
           - os: windows-latest
             target: x86_64-pc-windows-msvc
-            code-target: win32-x64
+            code-target:
+              win32-x64
               #- os: windows-latest
               #target: i686-pc-windows-msvc
               #code-target:
@@ -83,7 +88,8 @@ jobs:
               #code-target: win32-arm64
           - os: ubuntu-latest
             target: x86_64-unknown-linux-gnu
-            code-target: linux-x64
+            code-target:
+              linux-x64
               #- os: ubuntu-latest
               #target: aarch64-unknown-linux-musl
               #code-target: linux-arm64
@@ -99,33 +105,41 @@ jobs:
           - os: macos-latest
             target: aarch64-apple-darwin
             code-target: darwin-arm64
-    name: kcl-language-server build-release (${{ matrix.target }})
+
+    name: build-release (${{ matrix.target }})
     runs-on: ${{ matrix.os }}
     container: ${{ matrix.container }}
+
     env:
       RA_TARGET: ${{ matrix.target }}
+
     steps:
       - name: Checkout repository
         uses: actions/checkout@v4
         with:
           fetch-depth: ${{ env.FETCH_DEPTH }}
+
       - name: Use correct Rust toolchain
         shell: bash
         run: |
           rm rust/rust-toolchain.toml
+
       - name: Install rust
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: rust
           components: rust-src
           target: ${{ matrix.target }}
+
       - name: Install Node.js
         uses: actions/setup-node@v4
         with:
           node-version-file: ".nvmrc"
+
       - name: Update apt repositories
         if: matrix.target == 'aarch64-unknown-linux-gnu' || matrix.target == 'arm-unknown-linux-gnueabihf' || matrix.os == 'ubuntu-latest'
         run: sudo apt-get update
+
       - if: ${{ matrix.os == 'ubuntu-latest' }}
         name: Install deps
         shell: bash
@@ -150,53 +164,64 @@ jobs:
             zlib1g-dev
 
           cargo install cross
+
       - name: Install AArch64 target toolchain
         if: matrix.target == 'aarch64-unknown-linux-gnu'
         run: sudo apt-get install gcc-aarch64-linux-gnu
+
       - name: Install ARM target toolchain
         if: matrix.target == 'arm-unknown-linux-gnueabihf'
         run: sudo apt-get install gcc-arm-linux-gnueabihf
+
       - name: build
         run: |
           cd rust
           cargo kcl-language-server-release build --client-patch-version ${{ github.run_number }}
+
       - name: Install dependencies
         run: |
           cd rust/kcl-language-server
           # npm will symlink which will cause issues w tarballing later
           yarn install
+
       - name: Package Extension (release)
         if: startsWith(github.event.ref, 'refs/tags/')
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o "../build/kcl-language-server-${{ matrix.code-target }}.vsix" --target ${{ matrix.code-target }}
+
       - name: Package Extension (nightly)
         if: startsWith(github.event.ref, 'refs/tags/') == false
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o "../build/kcl-language-server-${{ matrix.code-target }}.vsix" --target ${{ matrix.code-target }} --pre-release
+
       - name: remove server
         if: matrix.target == 'x86_64-unknown-linux-gnu'
         run: |
           cd rust/kcl-language-server
           rm -rf server
+
       - name: Package Extension (no server, release)
         if: matrix.target == 'x86_64-unknown-linux-gnu' && startsWith(github.event.ref, 'refs/tags/')
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o ../build/kcl-language-server-no-server.vsix
+
       - name: Package Extension (no server, nightly)
         if: matrix.target == 'x86_64-unknown-linux-gnu' && startsWith(github.event.ref, 'refs/tags/') == false
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o ../build/kcl-language-server-no-server.vsix --pre-release
+
       - name: Upload artifacts
         uses: actions/upload-artifact@v4
         with:
           name: release-${{ matrix.target }}
           path: ./rust/build
+
   build-release-x86_64-unknown-linux-musl:
-    name: kcl-language-server build-release (x86_64-unknown-linux-musl)
+    name: build-release (x86_64-unknown-linux-musl)
     runs-on: ubuntu-latest
     env:
       RA_TARGET: x86_64-unknown-linux-musl
@@ -206,6 +231,7 @@ jobs:
       image: alpine:latest
       volumes:
         - /usr/local/cargo/registry:/usr/local/cargo/registry
+
     steps:
       - name: Install dependencies
         run: |
@@ -219,46 +245,55 @@ jobs:
             nodejs \
             npm \
             yarn
+
       - name: Checkout repository
         uses: actions/checkout@v4
         with:
           fetch-depth: ${{ env.FETCH_DEPTH }}
+
       - name: Use correct Rust toolchain
         shell: bash
         run: |
           rm rust/rust-toolchain.toml
+
       - name: Install rust
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: rust
           components: rust-src
           target: ${{ matrix.target }}
+
       - name: build
         run: |
           cd rust
           cargo kcl-language-server-release build --client-patch-version ${{ github.run_number }}
+
       - name: Install dependencies
         run: |
           cd rust/kcl-language-server
           # npm will symlink which will cause issues w tarballing later
           yarn install
+
       - name: Package Extension (release)
         if: startsWith(github.event.ref, 'refs/tags/')
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o "../build/kcl-language-server-alpine-x64.vsix" --target alpine-x64
+
       - name: Package Extension (release)
         if: startsWith(github.event.ref, 'refs/tags/') == false
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o "../build/kcl-language-server-alpine-x64.vsix" --target alpine-x64 --pre-release
+
       - name: Upload artifacts
         uses: actions/upload-artifact@v4
         with:
           name: release-x86_64-unknown-linux-musl
           path: ./rust/build
+
   publish:
-    name: kcl-language-server (publish)
+    name: publish
     runs-on: ubuntu-latest
     needs: ["build-release", "build-release-x86_64-unknown-linux-musl"]
     if: startsWith(github.event.ref, 'refs/tags')
@@ -266,17 +301,22 @@ jobs:
       contents: write
     steps:
       - run: echo "TAG=${GITHUB_REF#refs/*/}" >> $GITHUB_ENV
+
       - run: 'echo "TAG: $TAG"'
+
       - name: Checkout repository
         uses: actions/checkout@v4
         with:
           fetch-depth: ${{ env.FETCH_DEPTH }}
+
       - name: Install Nodejs
         uses: actions/setup-node@v4
         with:
           node-version-file: ".nvmrc"
+
       - run: echo "HEAD_SHA=$(git rev-parse HEAD)" >> $GITHUB_ENV
       - run: 'echo "HEAD_SHA: $HEAD_SHA"'
+
       - uses: actions/download-artifact@v4
         with:
           name: release-aarch64-apple-darwin
@@ -304,7 +344,8 @@ jobs:
       - uses: actions/download-artifact@v4
         with:
           name: release-x86_64-pc-windows-msvc
-          path: rust/build
+          path:
+            rust/build
             #- uses: actions/download-artifact@v4
             #with:
             #name: release-i686-pc-windows-msvc
@@ -315,18 +356,21 @@ jobs:
             #name: release-aarch64-pc-windows-msvc
             #path: rust/build
       - run: ls -al ./rust/build
+
       - name: Publish Release
         uses: ./.github/actions/github-release
         with:
           files: "rust/build/*"
           name: ${{ env.TAG }}
           token: ${{ secrets.GITHUB_TOKEN }}
+
       - name: move files to dir for upload
         shell: bash
         run: |
           cd rust
           mkdir -p releases/language-server/${{ env.TAG }}
           cp -r build/* releases/language-server/${{ env.TAG }}
+
       - name: "Authenticate to Google Cloud"
         uses: "google-github-actions/auth@v2.1.8"
         with:
@@ -341,12 +385,15 @@ jobs:
         with:
           path: rust/releases
           destination: dl.kittycad.io
+
       - run: rm rust/build/kcl-language-server-no-server.vsix
+
       - name: Publish Extension (Code Marketplace, release)
         # token from https://dev.azure.com/kcl-language-server/
         run: |
           cd rust/kcl-language-server
           npx vsce publish --pat ${{ secrets.VSCE_PAT }} --packagePath ../build/kcl-language-server-*.vsix
+
       - name: Publish Extension (OpenVSX, release)
         run: |
           cd rust/kcl-language-server

.github/workflows/kcl-python-bindings.yml

@@ -4,6 +4,7 @@
 #    maturin generate-ci github
 #
 name: kcl-python-bindings
+
 on:
   push:
     branches:
@@ -26,14 +27,16 @@ on:
       - '**.rs'
       - .github/workflows/kcl-python-bindings.yml
   workflow_dispatch:
+
 permissions:
   contents: read
+
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
+
 jobs:
   linux-x86_64:
-    name: kcl-python-bindings (linux-x86_64)
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
@@ -55,8 +58,8 @@ jobs:
         with:
           name: wheels-linux-x86_64
           path: rust/kcl-python-bindings/dist
+
   windows:
-    name: kcl-python-bindings (windows)
     runs-on: windows-16-cores
     strategy:
       matrix:
@@ -81,8 +84,8 @@ jobs:
         with:
           name: wheels-windows-${{ matrix.target }}
           path: rust/kcl-python-bindings/dist
+
   macos:
-    name: kcl-python-bindings (macos)
     runs-on: macos-latest
     strategy:
       matrix:
@@ -107,8 +110,8 @@ jobs:
         with:
           name: wheels-macos-${{ matrix.target }}
           path: rust/kcl-python-bindings/dist
+
   test:
-    name: kcl-python-bindings (test)
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
@@ -124,8 +127,8 @@ jobs:
         env:
           KITTYCAD_API_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
           ZOO_HOST: https://api.dev.zoo.dev
+
   sdist:
-    name: kcl-python-bindings (sdist)
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
@@ -148,6 +151,7 @@ jobs:
         with:
           name: wheels-sdist
           path: rust/kcl-python-bindings/dist
+
   release:
     name: Release
     runs-on: ubuntu-latest

.github/workflows/static-analysis.yml

@@ -28,7 +28,53 @@ jobs:
       - run: npm run fmt:check
 
   npm-build-wasm:
-    uses: ./.github/workflows/build-wasm.yml
+    # Build the wasm blob once on the fastest runner.
+    runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
+    steps:
+      - uses: actions/checkout@v4
+
+      - uses: actions/setup-node@v4
+        with:
+          node-version-file: '.nvmrc'
+          cache: 'npm'
+
+      - name: Install dependencies
+        run: npm install
+
+      - name: Use correct Rust toolchain
+        shell: bash
+        run: |
+          [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
+
+      - name: Install rust
+        uses: actions-rust-lang/setup-rust-toolchain@v1
+        with:
+          cache: false # Configured below.
+
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+        with:
+          tool: wasm-pack
+
+      - name: Rust Cache
+        uses: Swatinem/rust-cache@v2
+        with:
+          workspaces: './rust'
+
+      - name: Build Wasm
+        shell: bash
+        run: npm run build:wasm
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: prepared-wasm
+          path: |
+            rust/kcl-wasm-lib/pkg/kcl_wasm_lib*
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: prepared-ts-rs-bindings
+          path: |
+            rust/kcl-lib/bindings/*
 
   npm-tsc:
     runs-on: ubuntu-latest
@@ -127,3 +173,122 @@ jobs:
         uses: actions/checkout@v4
       - name: Run codespell
         uses: crate-ci/typos@v1.32.0
+
+  npm-unit-test-kcl-samples:
+    runs-on: ubuntu-latest
+    needs: npm-build-wasm
+    steps:
+      - uses: actions/checkout@v4
+
+      - uses: actions/setup-node@v4
+        with:
+          node-version-file: '.nvmrc'
+          cache: 'npm'
+
+      - run: npm install
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+        with:
+          tool: wasm-pack
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
+
+      - run: npm run simpleserver:bg
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+
+      - name: Install Chromium Browser
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+        run: npm run playwright install chromium --with-deps
+
+      - name: Download internal KCL samples
+        run: git clone --depth=1 https://x-access-token:${{ secrets.GH_PAT_KCL_SAMPLES_INTERNAL }}@github.com/KittyCAD/kcl-samples-internal public/kcl-samples/internal
+
+      - name: Regenerate KCL samples manifest
+        run: cd rust/kcl-lib && EXPECTORATE=overwrite cargo test generate_manifest
+
+      - name: Check public and internal KCL samples
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+        run: npm run test:unit:kcl-samples
+        env:
+          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
+
+  npm-unit-test:
+    runs-on: ubuntu-latest
+    needs: npm-build-wasm
+    steps:
+      - uses: actions/checkout@v4
+
+      - uses: actions/setup-node@v4
+        with:
+          node-version-file: '.nvmrc'
+          cache: 'npm'
+
+      - run: npm install
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+        with:
+          tool: wasm-pack
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
+
+      - run: npm run simpleserver:bg
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+
+      - name: Install Chromium Browser
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+        run: npm run playwright install chromium --with-deps
+
+      - name: Run unit tests
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+        run: xvfb-run -a npm run test:unit
+        env:
+          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
+
+      - name: Check for changes
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+        id: git-check
+        run: |
+            git add src/lang/std/artifactMapGraphs
+            if git status src/lang/std/artifactMapGraphs | grep -q "Changes to be committed"
+            then echo "modified=true" >> $GITHUB_OUTPUT
+            else echo "modified=false" >> $GITHUB_OUTPUT
+            fi
+      - name: Commit changes, if any
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' && steps.git-check.outputs.modified == 'true' }}
+        run: |
+          git config --local user.email "github-actions[bot]@users.noreply.github.com"
+          git config --local user.name "github-actions[bot]"
+          git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
+          git fetch origin
+          echo ${{ github.head_ref }}
+          git checkout ${{ github.head_ref }}
+          # TODO when webkit works on ubuntu remove the os part of the commit message
+          git commit -am "Look at this (photo)Graph *in the voice of Nickelback*" || true
+          git push
+          git push origin ${{ github.head_ref }}

.github/workflows/unit-tests.yml

@@ -1,124 +0,0 @@
-name: Unit Tests
-
-on:
-  pull_request:
-  push:
-    branches:
-      - main
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-permissions:
-  contents: write
-  pull-requests: write
-  actions: read
-
-jobs:
-  npm-build-wasm:
-    uses: ./.github/workflows/build-wasm.yml
-
-  npm-test-unit:
-    runs-on: ubuntu-latest
-    needs: npm-build-wasm
-    steps:
-      - uses: actions/checkout@v4
-
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'npm'
-
-      - run: npm install
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
-        with:
-          tool: wasm-pack
-
-      - name: Download all artifacts
-        uses: actions/download-artifact@v4
-
-      - name: Copy prepared wasm
-        run: |
-          ls -R prepared-wasm
-          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
-          mkdir rust/kcl-wasm-lib/pkg
-          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
-
-      - name: Copy prepared ts-rs bindings
-        run: |
-          ls -R prepared-ts-rs-bindings
-          mkdir rust/kcl-lib/bindings
-          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
-
-      - run: npm run simpleserver:bg
-        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
-
-      - name: Install Chromium Browser
-        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
-        run: npm run playwright install chromium --with-deps
-
-      - name: Run unit tests
-        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
-        run: xvfb-run -a npm run test:unit
-        env:
-          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-
-      - name: Check for changes
-        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
-        id: git-check
-        run: |
-            git add src/lang/std/artifactMapGraphs
-            if git status src/lang/std/artifactMapGraphs | grep -q "Changes to be committed"
-            then echo "modified=true" >> $GITHUB_OUTPUT
-            else echo "modified=false" >> $GITHUB_OUTPUT
-            fi
-
-      - name: Commit changes, if any
-        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' && steps.git-check.outputs.modified == 'true' }}
-        run: |
-          git config --local user.email "github-actions[bot]@users.noreply.github.com"
-          git config --local user.name "github-actions[bot]"
-          git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
-          git fetch origin
-          echo ${{ github.head_ref }}
-          git checkout ${{ github.head_ref }}
-          # TODO when webkit works on ubuntu remove the os part of the commit message
-          git commit -am "Look at this (photo)Graph *in the voice of Nickelback*" || true
-          git push
-          git push origin ${{ github.head_ref }}
-
-  npm-test-unit-components:
-    runs-on: ubuntu-latest
-    needs: npm-build-wasm
-    steps:
-      - uses: actions/checkout@v4
-
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'npm'
-
-      - run: npm install
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
-        with:
-          tool: wasm-pack
-
-      - name: Download all artifacts
-        uses: actions/download-artifact@v4
-
-      - name: Copy prepared wasm
-        run: |
-          ls -R prepared-wasm
-          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
-          mkdir rust/kcl-wasm-lib/pkg
-          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
-
-      - name: Copy prepared ts-rs bindings
-        run: |
-          ls -R prepared-ts-rs-bindings
-          mkdir rust/kcl-lib/bindings
-          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
-
-      - name: Run component tests
-        run: npm run test:unit:components

.gitignore

@@ -58,8 +58,6 @@ trace.zip
 /public/kcl-samples/.github
 /public/kcl-samples/screenshots/main.kcl
 /public/kcl-samples/step/main.kcl
-/public/kcl-samples/internal
-/rust/kcl-lib/tests/kcl_samples/internal
 /test-results/
 /playwright-report/
 /blob-report/

Makefile

@@ -114,6 +114,7 @@ test-unit: install ## Run the unit tests
 	npm run test:unit:components
 	@ curl -fs localhost:3000 >/dev/null || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
 	npm run test:unit
+	npm run test:unit:kcl-samples
 
 .PHONY: test-e2e
 test-e2e: test-e2e-$(TARGET)

README.md

@@ -42,6 +42,8 @@ The 3D view in Design Studio is just a video stream from our hosted geometry eng
 
 We recommend downloading the latest application binary from our [releases](https://github.com/KittyCAD/modeling-app/releases) page. If you don't see your platform or architecture supported there, please file an issue.
 
+If you'd like to try out upcoming changes sooner, you can also download those from our [nightly releases](https://zoo.dev/modeling-app/download/nightly) page.
+
 ## Developing
 
 Finally, if you'd like to run a development build or contribute to the project, please visit our [contributor guide](CONTRIBUTING.md) to get started.

_typos.toml

@@ -29,7 +29,6 @@ THRE = "THRE" # Weird bug that wrongly detects THREEjs as a typo
 nwo = "nwo" # don't know what this is about tbh
 "ot" = "ot" # some abbreviation, idk what
 "oe" = "oe" # some abbreviation, idk what
-"colinear" = "colinear" # some engine shit, kidding
 
 [default]
 extend-ignore-identifiers-re = [

docs/kcl-lang/index.md

@@ -4,7 +4,7 @@ excerpt: "Documentation of the KCL language for the Zoo Design Studio."
 layout: manual
 ---
 
-This is a reference for KCL. If you are learning KCL, you may prefer the [guide](https://zoo.dev/docs/kcl-book/intro.html) which explains
+This is a reference for KCL. If you are learning KCL, you may prefer the [guide]() which explains
 things in a more tutorial fashion. See also our documentation of the [standard library](/docs/kcl-std).
 
 ## Topics

docs/kcl-lang/modules.md

@@ -177,7 +177,7 @@ You can also import the whole module. This is useful if you want to use the
 result of a module as a variable, like a part.
 
 ```norun
-import "cube.kcl"
+import "tests/inputs/cube.kcl" as cube
 cube
   |> translate(x=10)
 ```
@@ -241,7 +241,7 @@ If you want to have multiple instances of the same object, you can use the
 [`clone`](/docs/kcl/clone) function. This will render a new instance of the object in memory.
 
 ```norun
-import cube from "cube.kcl"
+import cube from "tests/inputs/cube.kcl"
 
 cube  
   |> translate(x=10)
@@ -257,7 +257,7 @@ separate objects in memory, and can be manipulated independently.
 Here is an example with a file from another CAD system:
 
 ```kcl
-import "tests/inputs/cube.step"
+import "tests/inputs/cube.step" as cube
 
 cube
   |> translate(x=10)

docs/kcl-std/angledLine.md

@@ -46,7 +46,7 @@ angledLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> yLine(endAbsolute = 15)
-  |> angledLine(angle = 30, length = 15)
+  |> angledLine(angle = 30deg, length = 15)
   |> line(end = [8, -10])
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl-std/angledLineThatIntersects.md

@@ -42,7 +42,7 @@ exampleSketch = startSketchOn(XZ)
   |> line(endAbsolute = [5, 10])
   |> line(endAbsolute = [-10, 10], tag = $lineToIntersect)
   |> line(endAbsolute = [0, 20])
-  |> angledLineThatIntersects(angle = 80, intersectTag = lineToIntersect, offset = 10)
+  |> angledLineThatIntersects(angle = 80deg, intersectTag = lineToIntersect, offset = 10)
   |> close()
 
 example = extrude(exampleSketch, length = 10)

docs/kcl-std/appearance.md

@@ -54,7 +54,7 @@ example = extrude(exampleSketch, length = 5)
 // Add color to a revolved solid.
 sketch001 = startSketchOn(XY)
   |> circle(center = [15, 0], radius = 5)
-  |> revolve(angle = 360, axis = Y)
+  |> revolve(angle = 360deg, axis = Y)
   |> appearance(color = '#ff0000', metalness = 90, roughness = 90)
 ```
 
@@ -171,7 +171,7 @@ exampleSketch = startSketchOn(XZ)
   |> patternCircular2d(
        center = [0, 0],
        instances = 13,
-       arcDegrees = 360,
+       arcDegrees = 360deg,
        rotateDuplicates = true,
      )
 
@@ -188,9 +188,9 @@ example = extrude(exampleSketch, length = 1)
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc(angle = 90deg, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc(angle = -90deg, radius = 5)
   |> line(end = [0, 7])
 
 pipeHole = startSketchOn(XY)

docs/kcl-std/arc.md

@@ -46,7 +46,7 @@ Unless this makes a lot of sense and feels like what you're looking for to const
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])
-  |> arc(angleStart = 0, angleEnd = 280, radius = 16)
+  |> arc(angleStart = 0deg, angleEnd = 280deg, radius = 16)
   |> close()
 example = extrude(exampleSketch, length = 10)
 ```

docs/kcl-std/consts/std-math-E.md

@@ -19,7 +19,7 @@ E: number = 2.71828182845904523536028747135266250_
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 30,
+    angle = 30deg,
     length = 2 * E ^ 2,
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/consts/std-math-TAU.md

@@ -19,7 +19,7 @@ TAU: number = 6.28318530717958647692528676655900577_
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50,
+    angle = 50deg,
     length = 10 * TAU,
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/extrude.md

@@ -42,7 +42,7 @@ You can provide more than one sketch to extrude, and they will all be extruded i
 example = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])
-  |> arc(angleStart = 120, angleEnd = 0, radius = 5)
+  |> arc(angleStart = 120deg, angleEnd = 0deg, radius = 5)
   |> line(end = [5, 0])
   |> line(end = [0, 10])
   |> bezierCurve(control1 = [-10, 0], control2 = [2, 10], end = [-5, 10])
@@ -56,7 +56,7 @@ example = startSketchOn(XZ)
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [-10, 0])
-  |> arc(angleStart = 120, angleEnd = -60, radius = 5)
+  |> arc(angleStart = 120deg, angleEnd = -60deg, radius = 5)
   |> line(end = [10, 0])
   |> line(end = [5, 0])
   |> bezierCurve(control1 = [-3, 0], control2 = [2, 10], end = [-5, 10])
@@ -72,7 +72,7 @@ example = extrude(exampleSketch, length = 10)
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [-10, 0])
-  |> arc(angleStart = 120, angleEnd = -60, radius = 5)
+  |> arc(angleStart = 120deg, angleEnd = -60deg, radius = 5)
   |> line(end = [10, 0])
   |> line(end = [5, 0])
   |> bezierCurve(control1 = [-3, 0], control2 = [2, 10], end = [-5, 10])
@@ -88,7 +88,7 @@ example = extrude(exampleSketch, length = 20, symmetric = true)
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [-10, 0])
-  |> arc(angleStart = 120, angleEnd = -60, radius = 5)
+  |> arc(angleStart = 120deg, angleEnd = -60deg, radius = 5)
   |> line(end = [10, 0])
   |> line(end = [5, 0])
   |> bezierCurve(control1 = [-3, 0], control2 = [2, 10], end = [-5, 10])

docs/kcl-std/functions/std-array-reduce.md

@@ -12,7 +12,7 @@ reduce(
   @array: [any],
   initial: any,
   f: fn(any, accum: any): any,
-): any
+): [any]
 ```
 
 Take a starting value. Then, for each element of an array, calculate the next value,
@@ -28,7 +28,7 @@ using the previous value and the element.
 
 ### Returns
 
-[`any`](/docs/kcl-std/types/std-types-any)
+[`[any]`](/docs/kcl-std/types/std-types-any)
 
 
 ### Examples
@@ -80,7 +80,7 @@ fn decagon(@radius) {
 
   // Start the decagon sketch at this point.
   startOfDecagonSketch = startSketchOn(XY)
-    |> startProfile(at = [(cos(0)*radius), (sin(0) * radius)])
+    |> startProfile(at = [(cos(0deg)*radius), (sin(0deg) * radius)])
 
   // Use a `reduce` to draw the remaining decagon sides.
   // For each number in the array 1..10, run the given function,

docs/kcl-std/functions/std-math-abs.md

@@ -27,7 +27,7 @@ abs(@input: number): number
 ### Examples
 
 ```kcl
-myAngle = -120
+myAngle = -120deg
 
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])

docs/kcl-std/functions/std-math-cos.md

@@ -30,7 +30,7 @@ cos(@num: number(Angle)): number(_)
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 30,
+    angle = 30deg,
     length = 3 / cos(30deg),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-math-legLen.md

@@ -11,7 +11,7 @@ Compute the length of the given leg.
 legLen(
   hypotenuse: number(Length),
   leg: number(Length),
-): number(Length)
+): number(deg)
 ```
 
 
@@ -25,7 +25,7 @@ legLen(
 
 ### Returns
 
-[`number(Length)`](/docs/kcl-std/types/std-types-number) - A number.
+[`number(deg)`](/docs/kcl-std/types/std-types-number) - A number.
 
 
 ### Examples

docs/kcl-std/functions/std-math-max.md

@@ -30,7 +30,7 @@ max(@input: [number; 1+]): number
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 70,
+    angle = 70deg,
     length = max([15, 31, 4, 13, 22])
   )
   |> line(end = [20, 0])

docs/kcl-std/functions/std-math-min.md

@@ -30,7 +30,7 @@ min(@input: [number; 1+]): number
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 70,
+    angle = 70deg,
     length = min([15, 31, 4, 13, 22])
   )
   |> line(end = [20, 0])

docs/kcl-std/functions/std-math-polar.md

@@ -34,7 +34,7 @@ cartesian (x/y/z grid) coordinates.
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> line(end = polar(angle = 30, length = 5), tag = $thing)
+  |> line(end = polar(angle = 30deg, length = 5), tag = $thing)
   |> line(end = [0, 5])
   |> line(end = [segEndX(thing), 0])
   |> line(end = [-20, 10])

docs/kcl-std/functions/std-math-pow.md

@@ -34,7 +34,7 @@ pow(
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50,
+    angle = 50deg,
     length = pow(5, exp = 2),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-math-sin.md

@@ -30,7 +30,7 @@ sin(@num: number(Angle)): number(_)
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50,
+    angle = 50deg,
     length = 15 / sin(135deg),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-math-sqrt.md

@@ -30,7 +30,7 @@ sqrt(@input: number): number
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50,
+    angle = 50deg,
     length = sqrt(2500),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-math-tan.md

@@ -30,7 +30,7 @@ tan(@num: number(Angle)): number(_)
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50,
+    angle = 50deg,
     length = 50 * tan((1/2): number(rad)),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-transform-mirror2d.md

@@ -14,6 +14,8 @@ mirror2d(
 ): Sketch
 ```
 
+Only works on unclosed sketches for now.
+
 Mirror occurs around a local sketch axis rather than a global axis.
 
 ### Arguments

docs/kcl-std/functions/std-units-toDegrees.md

@@ -30,7 +30,7 @@ units::toDegrees(@num: number(Angle)): number(deg)
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50,
+    angle = 50deg,
     length = 70 * cos(units::toDegrees((PI/4): number(rad))),
   )
   |> yLine(endAbsolute = 0)

docs/kcl-std/functions/std-units-toRadians.md

@@ -30,8 +30,8 @@ units::toRadians(@num: number(Angle)): number(rad)
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = 50,
-    length = 70 * cos(units::toRadians(45)),
+    angle = 50deg,
+    length = 70 * cos(units::toRadians(45deg)),
   )
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl-std/getNextAdjacentEdge.md

@@ -30,10 +30,10 @@ getNextAdjacentEdge(@edge: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine(angle = 60deg, length = 10)
+  |> angledLine(angle = 120deg, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine(angle = 240deg, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl-std/getOppositeEdge.md

@@ -30,10 +30,10 @@ getOppositeEdge(@edge: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine(angle = 60deg, length = 10)
+  |> angledLine(angle = 120deg, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine(angle = 240deg, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl-std/getPreviousAdjacentEdge.md

@@ -30,10 +30,10 @@ getPreviousAdjacentEdge(@edge: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine(angle = 60deg, length = 10)
+  |> angledLine(angle = 120deg, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine(angle = 240deg, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl-std/index.md

@@ -65,7 +65,7 @@ layout: manual
   * [`line`](/docs/kcl-std/line)
   * [`loft`](/docs/kcl-std/loft)
   * [`patternCircular2d`](/docs/kcl-std/patternCircular2d)
-  * [`patternTransform2d`](/docs/kcl-std/functions/std-sketch-patternTransform2d)
+  * [`patternTransform2d`](/docs/kcl-std/patternTransform2d)
   * [`polygon`](/docs/kcl-std/polygon)
   * [`profileStart`](/docs/kcl-std/profileStart)
   * [`profileStartX`](/docs/kcl-std/profileStartX)
@@ -94,7 +94,7 @@ layout: manual
   * [`intersect`](/docs/kcl-std/intersect)
   * [`patternCircular3d`](/docs/kcl-std/patternCircular3d)
   * [`patternLinear3d`](/docs/kcl-std/patternLinear3d)
-  * [`patternTransform`](/docs/kcl-std/functions/std-solid-patternTransform)
+  * [`patternTransform`](/docs/kcl-std/patternTransform)
   * [`shell`](/docs/kcl-std/functions/std-solid-shell)
   * [`subtract`](/docs/kcl-std/subtract)
   * [`union`](/docs/kcl-std/union)

docs/kcl-std/involuteCircular.md

@@ -43,11 +43,11 @@ a = 10
 b = 14
 startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> involuteCircular(startRadius = a, endRadius = b, angle = 60)
+  |> involuteCircular(startRadius = a, endRadius = b, angle = 60deg)
   |> involuteCircular(
        startRadius = a,
        endRadius = b,
-       angle = 60,
+       angle = 60deg,
        reverse = true,
      )
 ```

docs/kcl-std/modules/std-sketch.md

@@ -30,7 +30,7 @@ This module contains functions for creating and manipulating sketches, and makin
 * [`line`](/docs/kcl-std/line)
 * [`loft`](/docs/kcl-std/loft)
 * [`patternCircular2d`](/docs/kcl-std/patternCircular2d)
-* [`patternTransform2d`](/docs/kcl-std/functions/std-sketch-patternTransform2d)
+* [`patternTransform2d`](/docs/kcl-std/patternTransform2d)
 * [`polygon`](/docs/kcl-std/polygon)
 * [`profileStart`](/docs/kcl-std/profileStart)
 * [`profileStartX`](/docs/kcl-std/profileStartX)

docs/kcl-std/modules/std-solid.md

@@ -18,7 +18,7 @@ This module contains functions for modifying solids, e.g., by adding a fillet or
 * [`intersect`](/docs/kcl-std/intersect)
 * [`patternCircular3d`](/docs/kcl-std/patternCircular3d)
 * [`patternLinear3d`](/docs/kcl-std/patternLinear3d)
-* [`patternTransform`](/docs/kcl-std/functions/std-solid-patternTransform)
+* [`patternTransform`](/docs/kcl-std/patternTransform)
 * [`shell`](/docs/kcl-std/functions/std-solid-shell)
 * [`subtract`](/docs/kcl-std/subtract)
 * [`union`](/docs/kcl-std/union)

docs/kcl-std/modules/std.md

@@ -11,7 +11,7 @@ Contains frequently used constants, functions for interacting with the KittyCAD
 
 The standard library is organised into modules (listed below), but most things are always available in KCL programs. 
 
-You might also want the [KCL language reference](/docs/kcl-lang) or the [KCL guide](https://zoo.dev/docs/kcl-book/intro.html). 
+You might also want the [KCL language reference](/docs/kcl-lang) or the [KCL guide](). 
 
 ## Modules
 

docs/kcl-std/patternCircular2d.md

@@ -12,8 +12,8 @@ patternCircular2d(
   @sketchSet: [Sketch],
   instances: number,
   center: Point2d,
-  arcDegrees?: number,
-  rotateDuplicates?: bool,
+  arcDegrees: number,
+  rotateDuplicates: bool,
   useOriginal?: bool,
 ): [Sketch]
 ```
@@ -27,8 +27,8 @@ patternCircular2d(
 | `sketchSet` | [`[Sketch]`](/docs/kcl-std/types/std-types-Sketch) | Which sketch(es) to pattern | Yes |
 | `instances` | [`number`](/docs/kcl-std/types/std-types-number) | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `center` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | The center about which to make the pattern. This is a 2D vector. | Yes |
-| `arcDegrees` | [`number`](/docs/kcl-std/types/std-types-number) | The arc angle (in degrees) to place the repetitions. Must be greater than 0. Defaults to 360. | No |
-| `rotateDuplicates` | [`bool`](/docs/kcl-std/types/std-types-bool) | Whether or not to rotate the duplicates as they are copied. Defaults to true. | No |
+| `arcDegrees` | [`number`](/docs/kcl-std/types/std-types-number) | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
+| `rotateDuplicates` | [`bool`](/docs/kcl-std/types/std-types-bool) | Whether or not to rotate the duplicates as they are copied. | Yes |
 | `useOriginal` | [`bool`](/docs/kcl-std/types/std-types-bool) | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
@@ -48,7 +48,7 @@ exampleSketch = startSketchOn(XZ)
   |> patternCircular2d(
        center = [0, 0],
        instances = 13,
-       arcDegrees = 360,
+       arcDegrees = 360deg,
        rotateDuplicates = true,
      )
 

docs/kcl-std/patternTransform2d.md

@@ -1,19 +1,19 @@
 ---
 title: "patternTransform2d"
 subtitle: "Function in std::sketch"
-excerpt: "Just like `patternTransform`, but works on 2D sketches not 3D solids."
+excerpt: "Just like patternTransform, but works on 2D sketches not 3D solids."
 layout: manual
 ---
 
-Just like `patternTransform`, but works on 2D sketches not 3D solids.
+Just like patternTransform, but works on 2D sketches not 3D solids.
 
 ```kcl
 patternTransform2d(
-  @sketches: [Sketch; 1+],
-  instances: number(_),
-  transform: fn(number(_)): { },
-  useOriginal?: boolean,
-): [Sketch; 1+]
+  @sketches: [Sketch],
+  instances: number,
+  transform: FunctionSource,
+  useOriginal?: bool,
+): [Sketch]
 ```
 
 
@@ -22,14 +22,14 @@ patternTransform2d(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketches` | [`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch) | The sketch(es) to duplicate. | Yes |
-| `instances` | [`number(_)`](/docs/kcl-std/types/std-types-number) | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
-| `transform` | [`fn(number(_)): { }`](/docs/kcl-std/types/std-types-fn) | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
-| `useOriginal` | `boolean` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. | No |
+| `sketches` | [`[Sketch]`](/docs/kcl-std/types/std-types-Sketch) | The sketch(es) to duplicate | Yes |
+| `instances` | [`number`](/docs/kcl-std/types/std-types-number) | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
+| `transform` | `FunctionSource` | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
+| `useOriginal` | [`bool`](/docs/kcl-std/types/std-types-bool) | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 
-[`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch)
+[`[Sketch]`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

docs/kcl-std/profileStart.md

@@ -29,8 +29,8 @@ profileStart(@profile: Sketch): [number]
 ```kcl
 sketch001 = startSketchOn(XY)
   |> startProfile(at = [5, 2])
-  |> angledLine(angle = 120, length = 50, tag = $seg01)
-  |> angledLine(angle = segAng(seg01) + 120, length = 50)
+  |> angledLine(angle = 120deg, length = 50, tag = $seg01)
+  |> angledLine(angle = segAng(seg01) + 120deg, length = 50)
   |> line(end = profileStart(%))
   |> close()
   |> extrude(length = 20)

docs/kcl-std/scale.md

@@ -49,9 +49,9 @@ If you want to apply the transform in global space, set `global` to `true`. The
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc(angle = 90deg, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc(angle = -90deg, radius = 5)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -85,8 +85,8 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfile(sketch001, at = [-200, 23.86])
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine(angle = 0deg, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90deg, length = 50.61)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -96,7 +96,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfile(sketch002, at = [0, 0])
   |> yLine(length = 231.81)
-  |> tangentialArc(radius = 80, angle = -90)
+  |> tangentialArc(radius = 80, angle = -90deg)
   |> xLine(length = 384.93)
 
 parts = sweep([rectangleSketch, circleSketch], path = sweepPath)

docs/kcl-std/segLen.md

@@ -29,9 +29,9 @@ segLen(@tag: TagIdentifier): number
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 60, length = 10, tag = $thing)
-  |> tangentialArc(angle = -120, radius = 5)
-  |> angledLine(angle = -60, length = segLen(thing))
+  |> angledLine(angle = 60deg, length = 10, tag = $thing)
+  |> tangentialArc(angle = -120deg, radius = 5)
+  |> angledLine(angle = -60deg, length = segLen(thing))
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl-std/startSketchOn.md

@@ -146,7 +146,7 @@ exampleSketch = startSketchOn(XY)
   |> line(end = [-2, 0])
   |> close()
 
-example = revolve(exampleSketch, axis = Y, angle = 180)
+example = revolve(exampleSketch, axis = Y, angle = 180deg)
 
 exampleSketch002 = startSketchOn(example, face = END)
   |> startProfile(at = [4.5, -5])
@@ -178,7 +178,7 @@ exampleSketch = startSketchOn(XY)
 example = revolve(
   exampleSketch,
   axis = Y,
-  angle = 180,
+  angle = 180deg,
   tagEnd = $end01,
 )
 

docs/kcl-std/tangentialArc.md

@@ -41,7 +41,7 @@ When using radius and angle, draw a curved line segment along part of an imagina
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 45, length = 10)
+  |> angledLine(angle = 45deg, length = 10)
   |> tangentialArc(end = [0, -10])
   |> line(end = [-10, 0])
   |> close()
@@ -54,7 +54,7 @@ example = extrude(exampleSketch, length = 10)
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 60, length = 10)
+  |> angledLine(angle = 60deg, length = 10)
   |> tangentialArc(endAbsolute = [15, 15])
   |> line(end = [10, -15])
   |> close()
@@ -67,9 +67,9 @@ example = extrude(exampleSketch, length = 10)
 ```kcl
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 60, length = 10)
-  |> tangentialArc(radius = 10, angle = -120)
-  |> angledLine(angle = -60, length = 10)
+  |> angledLine(angle = 60deg, length = 10)
+  |> tangentialArc(radius = 10, angle = -120deg)
+  |> angledLine(angle = -60deg, length = 10)
   |> close()
 
 example = extrude(exampleSketch, length = 10)

docs/kcl-std/translate.md

@@ -45,9 +45,9 @@ Translate is really useful for sketches if you want to move a sketch and then ro
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc(angle = 90deg, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc(angle = -90deg, radius = 5)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -86,8 +86,8 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfile(sketch001, at = [-200, 23.86])
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine(angle = 0deg, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90deg, length = 50.61)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -97,7 +97,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfile(sketch002, at = [0, 0])
   |> yLine(length = 231.81)
-  |> tangentialArc(radius = 80, angle = -90)
+  |> tangentialArc(radius = 80, angle = -90deg)
   |> xLine(length = 384.93)
 
 parts = sweep([rectangleSketch, circleSketch], path = sweepPath)
@@ -156,7 +156,7 @@ profile001 = square()
 
 profile002 = square()
   |> translate(z = 20)
-  |> rotate(axis = [0, 0, 1.0], angle = 45)
+  |> rotate(axis = [0, 0, 1.0], angle = 45deg)
 
 loft([profile001, profile002])
 ```

docs/kcl-std/types/std-types-tag.md

@@ -15,9 +15,9 @@ way:
 ```js
 startSketchOn(XZ)
   |> startProfile(at = origin)
-  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 191.26, tag = $rectangleSegmentA001)
   |> angledLine(
-       angle = segAng(rectangleSegmentA001) - 90,
+       angle = segAng(rectangleSegmentA001) - 90deg,
        length = 196.99,
        tag = $rectangleSegmentB001,
      )
@@ -49,9 +49,9 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn(XZ)
     |> startProfile(at = origin)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(angle = 0deg, length = 191.26, tag = $rectangleSegmentA001)
     |> angledLine(
-         angle = segAng(rectangleSegmentA001) - 90,
+         angle = segAng(rectangleSegmentA001) - 90deg,
          length = 196.99,
          tag = $rectangleSegmentB001)
     |> angledLine(
@@ -78,9 +78,9 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn(XZ)
     |> startProfile(at = origin)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(angle = 0deg, length = 191.26, tag = $rectangleSegmentA001)
     |> angledLine(
-         angle = segAng(rectangleSegmentA001) - 90,
+         angle = segAng(rectangleSegmentA001) - 90deg,
          length = 196.99
          tag = $rectangleSegmentB001,
        )

docs/kcl-std/xLine.md

@@ -38,10 +38,10 @@ xLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> xLine(length = 15)
-  |> angledLine(angle = 80, length = 15)
+  |> angledLine(angle = 80deg, length = 15)
   |> line(end = [8, -10])
   |> xLine(length = 10)
-  |> angledLine(angle = 120, length = 30)
+  |> angledLine(angle = 120deg, length = 30)
   |> xLine(length = -15)
   |> close()
 

docs/kcl-std/yLine.md

@@ -38,7 +38,7 @@ yLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> yLine(length = 15)
-  |> angledLine(angle = 30, length = 15)
+  |> angledLine(angle = 30deg, length = 15)
   |> line(end = [8, -10])
   |> yLine(length = -5)
   |> close()

e2e/playwright/code-pane-and-errors.spec.ts

@@ -235,48 +235,6 @@ extrude001 = extrude(sketch001, length = 5)`
         .first()
     ).toBeVisible()
   })
-
-  test('KCL errors with functions show hints for the entire backtrace', async ({
-    page,
-    homePage,
-    scene,
-    cmdBar,
-    editor,
-    toolbar,
-  }) => {
-    await homePage.goToModelingScene()
-    await scene.settled(cmdBar)
-
-    const code = `fn check(@x) {
-  return assert(x, isGreaterThan = 0)
-}
-
-fn middle(@x) {
-  return check(x)
-}
-
-middle(1)
-middle(0)
-`
-    await test.step('Set the code with a KCL error', async () => {
-      await toolbar.openPane('code')
-      await editor.replaceCode('', code)
-    })
-    // This shows all the diagnostics in a way that doesn't require the mouse
-    // pointer hovering over a coordinate, which would be brittle.
-    await test.step('Open CodeMirror diagnostics list', async () => {
-      // Ensure keyboard focus is in the editor.
-      await page.getByText('fn check(').click()
-      await page.keyboard.press('ControlOrMeta+Shift+M')
-    })
-    await expect(
-      page.getByText(`assert failed: Expected 0 to be greater than 0 but it wasn't
-check()
-middle()`)
-    ).toBeVisible()
-    // There should be one hint inside middle() and one at the top level.
-    await expect(page.getByText('Part of the error backtrace')).toHaveCount(2)
-  })
 })
 
 test(

e2e/playwright/command-bar-tests.spec.ts

@@ -36,29 +36,27 @@ test.describe('Command bar tests', () => {
     await u.closeDebugPanel()
 
     // Click the line of code for xLine.
-    await page.getByText(`startProfile(at = [-10, -10])`).click()
-
-    // Wait for the selection to register (TODO: we need a definitive way to wait for this)
-    await page.waitForTimeout(200)
+    await page.getByText(`close()`).click() // TODO remove this and reinstate // await topHorzSegmentClick()
 
     await toolbar.extrudeButton.click()
     await cmdBar.expectState({
       stage: 'arguments',
       commandName: 'Extrude',
-      currentArgKey: 'length',
-      currentArgValue: '5',
+      currentArgKey: 'sketches',
+      currentArgValue: '',
       headerArguments: {
-        Profiles: '1 profile',
+        Sketches: '',
         Length: '',
       },
-      highlightedHeaderArg: 'length',
+      highlightedHeaderArg: 'sketches',
     })
     await cmdBar.progressCmdBar()
+    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'review',
       commandName: 'Extrude',
       headerArguments: {
-        Profiles: '1 profile',
+        Sketches: '1 segment',
         Length: '5',
       },
     })
@@ -288,7 +286,7 @@ test.describe('Command bar tests', () => {
     await cmdBar.cmdOptions.getByText('Extrude').click()
 
     // Assert that we're on the selection step
-    await expect(page.getByRole('button', { name: 'Profiles' })).toBeDisabled()
+    await expect(page.getByRole('button', { name: 'sketches' })).toBeDisabled()
     // Select a face
     await page.mouse.move(700, 200)
     await page.mouse.click(700, 200)
@@ -401,6 +399,7 @@ test.describe('Command bar tests', () => {
         sortBy: 'last-modified-desc',
       })
       await page.goto(page.url() + targetURL)
+      expect(page.url()).toContain(targetURL)
     })
 
     await test.step(`Submit the command`, async () => {
@@ -411,7 +410,7 @@ test.describe('Command bar tests', () => {
         currentArgValue: '',
         headerArguments: {
           Method: '',
-          Name: 'main.kcl',
+          Name: 'test',
           Code: '1 line',
         },
         highlightedHeaderArg: 'method',
@@ -422,7 +421,7 @@ test.describe('Command bar tests', () => {
         commandName: 'Import file from URL',
         headerArguments: {
           Method: 'New project',
-          Name: 'main.kcl',
+          Name: 'test',
           Code: '1 line',
         },
       })
@@ -464,6 +463,7 @@ test.describe('Command bar tests', () => {
         sortBy: 'last-modified-desc',
       })
       await page.goto(page.url() + targetURL)
+      expect(page.url()).toContain(targetURL)
     })
 
     await test.step(`Submit the command`, async () => {
@@ -474,7 +474,7 @@ test.describe('Command bar tests', () => {
         currentArgValue: '',
         headerArguments: {
           Method: '',
-          Name: 'main.kcl',
+          Name: 'test',
           Code: '1 line',
         },
         highlightedHeaderArg: 'method',
@@ -487,7 +487,7 @@ test.describe('Command bar tests', () => {
         currentArgValue: '',
         headerArguments: {
           Method: 'Existing project',
-          Name: 'main.kcl',
+          Name: 'test',
           ProjectName: '',
           Code: '1 line',
         },
@@ -500,7 +500,7 @@ test.describe('Command bar tests', () => {
         headerArguments: {
           Method: 'Existing project',
           ProjectName: 'testProjectDir',
-          Name: 'main.kcl',
+          Name: 'test',
           Code: '1 line',
         },
       })
@@ -510,7 +510,7 @@ test.describe('Command bar tests', () => {
     await test.step(`Ensure we created the project and are in the modeling scene`, async () => {
       await editor.expectEditor.toContain('extrusionDistance = 12')
       await toolbar.openPane('files')
-      await toolbar.expectFileTreeState(['main-1.kcl', 'main.kcl'])
+      await toolbar.expectFileTreeState(['main.kcl', 'test.kcl'])
     })
   })
 
@@ -661,27 +661,4 @@ c = 3 + a`
       `a = 5b = a * amyParameter001 = ${newValue}c = 3 + a`
     )
   })
-
-  test('Command palette can be opened via query parameter', async ({
-    page,
-    homePage,
-    cmdBar,
-  }) => {
-    await page.goto(`${page.url()}/?cmd=app.theme&groupId=settings`)
-    await homePage.expectState({
-      projectCards: [],
-      sortBy: 'last-modified-desc',
-    })
-    await cmdBar.expectState({
-      stage: 'arguments',
-      commandName: 'Settings · app · theme',
-      currentArgKey: 'value',
-      currentArgValue: '',
-      headerArguments: {
-        Level: 'user',
-        Value: '',
-      },
-      highlightedHeaderArg: 'value',
-    })
-  })
 })

e2e/playwright/desktop-export.spec.ts

@@ -65,9 +65,7 @@ test(
       await expect(engineErrorToastMessage).not.toBeVisible()
 
       const successToastMessage = page.getByText(`Exported successfully`)
-      await page.waitForTimeout(1_000)
-      const count = await successToastMessage.count()
-      await expect(count).toBeGreaterThanOrEqual(1)
+      await expect(successToastMessage).toBeVisible()
 
       // Check for the exported file
       const firstFileFullPath = path.resolve(
@@ -136,9 +134,7 @@ test(
       await expect(engineErrorToastMessage).not.toBeVisible()
 
       const successToastMessage = page.getByText(`Exported successfully`)
-      await page.waitForTimeout(1_000)
-      const count = await successToastMessage.count()
-      await expect(count).toBeGreaterThanOrEqual(1)
+      await expect(successToastMessage).toBeVisible()
       await expect(exportingToastMessage).not.toBeVisible()
 
       // Check for the exported file=

e2e/playwright/editor-tests.spec.ts

@@ -912,7 +912,7 @@ a1 = startSketchOn(offsetPlane(XY, offset = 10))
     |> close()
     |> revolve(
     axis = revolveAxis,
-    angle = 90
+    angle = 90deg
     )
     `
       )
@@ -1131,15 +1131,14 @@ sketch001 = startSketchOn(XZ)
     await page.waitForTimeout(100)
 
     await page.getByText('startProfile(at = [4.61, -14.01])').click()
-    // Wait for the selection to register (TODO: we need a definitive way to wait for this)
-    await page.waitForTimeout(200)
     await toolbar.extrudeButton.click()
+    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'arguments',
       currentArgKey: 'length',
       currentArgValue: '5',
       headerArguments: {
-        Profiles: '1 profile',
+        Sketches: '1 face',
         Length: '',
       },
       highlightedHeaderArg: 'length',
@@ -1149,7 +1148,7 @@ sketch001 = startSketchOn(XZ)
     await cmdBar.expectState({
       stage: 'review',
       headerArguments: {
-        Profiles: '1 profile',
+        Sketches: '1 face',
         Length: '5',
       },
       commandName: 'Extrude',
@@ -1355,9 +1354,7 @@ sketch001 = startSketchOn(XZ)
       const u = await getUtils(page)
       const projectLink = page.getByRole('link', { name: 'cube' })
       const gizmo = page.locator('[aria-label*=gizmo]')
-      const resetCameraButton = page.getByRole('button', {
-        name: 'Reset view',
-      })
+      const resetCameraButton = page.getByRole('button', { name: 'Reset view' })
       const locationToHaveColor = async (
         position: { x: number; y: number },
         color: [number, number, number]

e2e/playwright/feature-tree-pane.spec.ts

@@ -38,7 +38,7 @@ extrude001 = extrude(sketch002, length = 10)
 
 const FEATURE_TREE_SKETCH_CODE = `sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 0, length = 4, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 4, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])

e2e/playwright/fixtures/cmdBarFixture.ts

@@ -146,7 +146,9 @@ export class CmdBarFixture {
     await this.cmdBarOpenBtn.click()
     await expect(this.page.getByPlaceholder('Search commands')).toBeVisible()
     if (selectCmd === 'promptToEdit') {
-      const promptEditCommand = this.selectOption({ name: 'Text-to-CAD Edit' })
+      const promptEditCommand = this.page.getByText(
+        'Use Zoo AI to edit your parts and code.'
+      )
       await expect(promptEditCommand.first()).toBeVisible()
       await promptEditCommand.first().scrollIntoViewIfNeeded()
       await promptEditCommand.first().click()

e2e/playwright/fixtures/homePageFixture.ts

@@ -121,13 +121,11 @@ export class HomePageFixture {
     await projectCard.click()
   }
 
-  /** Returns the project name in case caller has used the default and needs it */
-  goToModelingScene = async (name = 'testDefault') => {
+  goToModelingScene = async (name: string = 'testDefault') => {
     // On web this is a no-op. There is no project view.
-    if (process.env.PLATFORM === 'web') return ''
+    if (process.env.PLATFORM === 'web') return
 
     await this.createAndGoToProject(name)
-    return name
   }
 
   isNativeFileMenuCreated = async () => {

e2e/playwright/import-ui.spec.ts

@@ -16,7 +16,7 @@ test.describe('Import UI tests', () => {
           path.join(projectDir, 'toBeImported.kcl'),
           `sketch001 = startSketchOn(XZ)
 profile001 = startProfile(sketch001, at = [281.54, 305.81])
-  |> angledLine(angle = 0, length = 123.43, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 123.43, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 85.99)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -33,7 +33,7 @@ importedCube
 
 sketch001 = startSketchOn(XZ)
 profile001 = startProfile(sketch001, at = [-134.53, -56.17])
-  |> angledLine(angle = 0, length = 79.05, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 79.05, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 76.28)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $seg01)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)

e2e/playwright/native-file-menu.spec.ts

@@ -197,6 +197,18 @@ test.describe(
         await clickElectronNativeMenuById(tronApp, 'File.Export current part')
         await cmdBar.expectCommandName('Export')
       })
+      await test.step('Modeling.File.Share part via Zoo link', async () => {
+        await page.waitForTimeout(250)
+        await clickElectronNativeMenuById(
+          tronApp,
+          'File.Share part via Zoo link'
+        )
+        const textToCheck =
+          'Link copied to clipboard. Anyone who clicks this link will get a copy of this file. Share carefully!'
+        // Check if text appears anywhere in the page
+        const isTextVisible = page.getByText(textToCheck)
+        await expect(isTextVisible).toBeVisible({ timeout: 10000 })
+      })
       await test.step('Modeling.File.Preferences.Project settings', async () => {
         await page.waitForTimeout(250)
         await clickElectronNativeMenuById(
@@ -252,7 +264,7 @@ test.describe(
           tronApp,
           'Edit.Modify with Zoo Text-To-CAD'
         )
-        await cmdBar.expectCommandName('Text-to-CAD Edit')
+        await cmdBar.expectCommandName('Prompt-to-edit')
       })
       await test.step('Modeling.Edit.Edit parameter', async () => {
         await page.waitForTimeout(250)
@@ -518,7 +530,7 @@ test.describe(
           'Design.Create with Zoo Text-To-CAD'
         )
         await cmdBar.toBeOpened()
-        await cmdBar.expectCommandName('Text-to-CAD Create')
+        await cmdBar.expectCommandName('Text to CAD')
       })
 
       await test.step('Modeling.Design.Modify with Zoo Text-To-CAD', async () => {
@@ -528,7 +540,7 @@ test.describe(
           'Design.Modify with Zoo Text-To-CAD'
         )
         await cmdBar.toBeOpened()
-        await cmdBar.expectCommandName('Text-to-CAD Edit')
+        await cmdBar.expectCommandName('Prompt-to-edit')
       })
 
       await test.step('Modeling.Help.KCL code samples', async () => {

e2e/playwright/onboarding-tests.spec.ts

@@ -6,6 +6,7 @@ test.describe('Onboarding tests', () => {
     homePage,
     toolbar,
     editor,
+    scene,
     tronApp,
   }) => {
     if (!tronApp) {
@@ -61,6 +62,7 @@ test.describe('Onboarding tests', () => {
       await editor.expectEditor.toContain('@settings(defaultLengthUnit = in)', {
         shouldNormalise: true,
       })
+      await scene.connectionEstablished()
     })
 
     await test.step('Go home and verify we still see the tutorial button, then begin it.', async () => {
@@ -130,7 +132,9 @@ test.describe('Onboarding tests', () => {
       })
 
       await test.step('Dismiss the onboarding', async () => {
+        await postDismissToast.waitFor({ state: 'hidden' })
         await page.keyboard.press('Escape')
+        await expect(postDismissToast).toBeVisible()
         await expect(page.getByTestId('onboarding-content')).not.toBeVisible()
         await expect.poll(() => page.url()).not.toContain('/onboarding')
       })
@@ -158,10 +162,13 @@ test.describe('Onboarding tests', () => {
       await test.step('Gets to the onboarding start', async () => {
         await expect(toolbar.projectName).toContainText('tutorial-project')
         await expect(tutorialWelcomeHeading).toBeVisible()
+        await scene.connectionEstablished()
       })
 
       await test.step('Dismiss the onboarding', async () => {
+        await postDismissToast.waitFor({ state: 'hidden' })
         await page.keyboard.press('Escape')
+        await expect(postDismissToast).toBeVisible()
         await expect(page.getByTestId('onboarding-content')).not.toBeVisible()
         await expect.poll(() => page.url()).not.toContain('/onboarding')
       })

e2e/playwright/point-click.spec.ts

@@ -74,11 +74,20 @@ test.describe('Point-and-click tests', () => {
 
     await test.step('do extrude flow and check extrude code is added to editor', async () => {
       await toolbar.extrudeButton.click()
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'sketches',
+        currentArgValue: '',
+        headerArguments: { Sketches: '', Length: '' },
+        highlightedHeaderArg: 'sketches',
+        commandName: 'Extrude',
+      })
+      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'length',
         currentArgValue: '5',
-        headerArguments: { Profiles: '1 profile', Length: '' },
+        headerArguments: { Sketches: '1 face', Length: '' },
         highlightedHeaderArg: 'length',
         commandName: 'Extrude',
       })
@@ -89,7 +98,7 @@ test.describe('Point-and-click tests', () => {
 
       await cmdBar.expectState({
         stage: 'review',
-        headerArguments: { Profiles: '1 profile', Length: '5' },
+        headerArguments: { Sketches: '1 face', Length: '5' },
         commandName: 'Extrude',
       })
       await cmdBar.progressCmdBar()
@@ -356,7 +365,7 @@ test.describe('Point-and-click tests', () => {
         clickCoords: { x: 677, y: 87 },
         cameraPos: { x: -6200, y: 1500, z: 6200 },
         cameraTarget: { x: 8300, y: 1100, z: 4800 },
-        beforeChamferSnippet: `angledLine(angle = 0, length = 268.43, tag = $rectangleSegmentA001)chamfer(
+        beforeChamferSnippet: `angledLine(angle = 0deg, length = 268.43, tag = $rectangleSegmentA001)chamfer(
          length = 30,
          tags = [
            getNextAdjacentEdge(yo),
@@ -398,7 +407,7 @@ test.describe('Point-and-click tests', () => {
 
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [75.8, 317.2]) // [$startCapTag, $EndCapTag]
-  |> angledLine(angle = 0, length = 268.43, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 268.43, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 217.26, tag = $seg01)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $yo)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
@@ -410,28 +419,28 @@ extrude001 = extrude(sketch001, length = 100)
   |> chamfer(length = 30, tags = [getNextAdjacentEdge(yo)], tag = $seg06)
 sketch002 = startSketchOn(extrude001, face = seg03)
 profile001 = startProfile(sketch002, at = [205.96, 254.59])
-  |> angledLine(angle = 0, length = 11.39, tag = $rectangleSegmentA002)
+  |> angledLine(angle = 0deg, length = 11.39, tag = $rectangleSegmentA002)
   |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 105.26)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 sketch003 = startSketchOn(extrude001, face = seg04)
 profile002 = startProfile(sketch003, at = [-209.64, 255.28])
-  |> angledLine(angle = 0, length = 11.56, tag = $rectangleSegmentA003)
+  |> angledLine(angle = 0deg, length = 11.56, tag = $rectangleSegmentA003)
   |> angledLine(angle = segAng(rectangleSegmentA003) - 90, length = 106.84)
   |> angledLine(angle = segAng(rectangleSegmentA003), length = -segLen(rectangleSegmentA003))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 sketch004 = startSketchOn(extrude001, face = seg05)
 profile003 = startProfile(sketch004, at = [82.57, 322.96])
-  |> angledLine(angle = 0, length = 11.16, tag = $rectangleSegmentA004)
+  |> angledLine(angle = 0deg, length = 11.16, tag = $rectangleSegmentA004)
   |> angledLine(angle = segAng(rectangleSegmentA004) - 90, length = 103.07)
   |> angledLine(angle = segAng(rectangleSegmentA004), length = -segLen(rectangleSegmentA004))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 sketch005 = startSketchOn(extrude001, face = seg06)
 profile004 = startProfile(sketch005, at = [-23.43, 19.69])
-  |> angledLine(angle = 0, length = 9.1, tag = $rectangleSegmentA005)
+  |> angledLine(angle = 0deg, length = 9.1, tag = $rectangleSegmentA005)
   |> angledLine(angle = segAng(rectangleSegmentA005) - 90, length = 84.07)
   |> angledLine(angle = segAng(rectangleSegmentA005), length = -segLen(rectangleSegmentA005))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -495,7 +504,7 @@ profile004 = startProfile(sketch005, at = [-23.43, 19.69])
         `@settings(defaultLengthUnit = in)
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [75.8, 317.2])
-  |> angledLine(angle = 0, length = 268.43, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 268.43, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 217.26, tag = $seg01)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $yo)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
@@ -517,7 +526,7 @@ chamf = chamfer(
      )
 sketch002 = startSketchOn(extrude001, face = seg03)
 profile001 = startProfile(sketch002, at = [205.96, 254.59])
-  |> angledLine(angle = 0, length = 11.39, tag = $rectangleSegmentA002)
+  |> angledLine(angle = 0deg, length = 11.39, tag = $rectangleSegmentA002)
   |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 105.26)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -1625,15 +1634,15 @@ sketch002 = startSketchOn(plane001)
             stage: 'arguments',
             currentArgKey: 'sketches',
             currentArgValue: '',
-            headerArguments: { Profiles: '' },
-            highlightedHeaderArg: 'Profiles',
+            headerArguments: { Sketches: '' },
+            highlightedHeaderArg: 'sketches',
             commandName: 'Loft',
           })
           await selectSketches()
           await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
-            headerArguments: { Profiles: '2 profiles' },
+            headerArguments: { Sketches: '2 faces' },
             commandName: 'Loft',
           })
           await cmdBar.submit()
@@ -1645,9 +1654,18 @@ sketch002 = startSketchOn(plane001)
 
         await test.step(`Go through the command bar flow with preselected sketches`, async () => {
           await toolbar.loftButton.click()
+          await cmdBar.expectState({
+            stage: 'arguments',
+            currentArgKey: 'sketches',
+            currentArgValue: '',
+            headerArguments: { Sketches: '' },
+            highlightedHeaderArg: 'sketches',
+            commandName: 'Loft',
+          })
+          await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
-            headerArguments: { Profiles: '2 profiles' },
+            headerArguments: { Sketches: '2 faces' },
             commandName: 'Loft',
           })
           await cmdBar.submit()
@@ -1758,7 +1776,7 @@ sketch002 = startSketchOn(XZ)
       initialCode: `@settings(defaultLengthUnit = in)
 sketch001 = startSketchOn(YZ)
 profile001 = startProfile(sketch001, at = [-400, -400])
-  |> angledLine(angle = 0, length = 800, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 800, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = 800)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -1812,10 +1830,10 @@ sketch002 = startSketchOn(XZ)
           currentArgValue: '',
           headerArguments: {
             Sectional: '',
-            Profiles: '',
+            Sketches: '',
             Path: '',
           },
-          highlightedHeaderArg: 'Profiles',
+          highlightedHeaderArg: 'sketches',
           stage: 'arguments',
         })
         await clickOnSketch1()
@@ -1826,7 +1844,7 @@ sketch002 = startSketchOn(XZ)
           currentArgValue: '',
           headerArguments: {
             Sectional: '',
-            Profiles: '1 profile',
+            Sketches: '1 face',
             Path: '',
           },
           highlightedHeaderArg: 'path',
@@ -1839,7 +1857,7 @@ sketch002 = startSketchOn(XZ)
           currentArgValue: '',
           headerArguments: {
             Sectional: '',
-            Profiles: '1 profile',
+            Sketches: '1 face',
             Path: '',
           },
           highlightedHeaderArg: 'path',
@@ -1849,7 +1867,7 @@ sketch002 = startSketchOn(XZ)
         await cmdBar.expectState({
           commandName: 'Sweep',
           headerArguments: {
-            Profiles: '1 profile',
+            Sketches: '1 face',
             Path: '1 segment',
             Sectional: '',
           },
@@ -1950,10 +1968,10 @@ profile001 = ${circleCode}`
         currentArgValue: '',
         headerArguments: {
           Sectional: '',
-          Profiles: '',
+          Sketches: '',
           Path: '',
         },
-        highlightedHeaderArg: 'Profiles',
+        highlightedHeaderArg: 'sketches',
         stage: 'arguments',
       })
       await editor.scrollToText(circleCode)
@@ -1965,7 +1983,7 @@ profile001 = ${circleCode}`
         currentArgValue: '',
         headerArguments: {
           Sectional: '',
-          Profiles: '1 profile',
+          Sketches: '1 face',
           Path: '',
         },
         highlightedHeaderArg: 'path',
@@ -1979,7 +1997,7 @@ profile001 = ${circleCode}`
         currentArgValue: '',
         headerArguments: {
           Sectional: '',
-          Profiles: '1 profile',
+          Sketches: '1 face',
           Path: '',
         },
         highlightedHeaderArg: 'path',
@@ -1989,7 +2007,7 @@ profile001 = ${circleCode}`
       await cmdBar.expectState({
         commandName: 'Sweep',
         headerArguments: {
-          Profiles: '1 profile',
+          Sketches: '1 face',
           Path: '1 helix',
           Sectional: '',
         },
@@ -2088,6 +2106,18 @@ extrude001 = extrude(sketch001, length = -12)
     await test.step(`Apply fillet to the preselected edge`, async () => {
       await page.waitForTimeout(100)
       await toolbar.filletButton.click()
+      await cmdBar.expectState({
+        commandName: 'Fillet',
+        highlightedHeaderArg: 'selection',
+        currentArgKey: 'selection',
+        currentArgValue: '',
+        headerArguments: {
+          Selection: '',
+          Radius: '',
+        },
+        stage: 'arguments',
+      })
+      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         commandName: 'Fillet',
         highlightedHeaderArg: 'radius',
@@ -2617,6 +2647,18 @@ extrude001 = extrude(profile001, length = 5)
       await test.step(`Apply fillet`, async () => {
         await page.waitForTimeout(100)
         await toolbar.filletButton.click()
+        await cmdBar.expectState({
+          commandName: 'Fillet',
+          highlightedHeaderArg: 'selection',
+          currentArgKey: 'selection',
+          currentArgValue: '',
+          headerArguments: {
+            Selection: '',
+            Radius: '',
+          },
+          stage: 'arguments',
+        })
+        await cmdBar.progressCmdBar()
         await cmdBar.expectState({
           commandName: 'Fillet',
           highlightedHeaderArg: 'radius',
@@ -2722,6 +2764,19 @@ extrude001 = extrude(sketch001, length = -12)
     await test.step(`Apply chamfer to the preselected edge`, async () => {
       await page.waitForTimeout(100)
       await toolbar.chamferButton.click()
+      await cmdBar.expectState({
+        commandName: 'Chamfer',
+        highlightedHeaderArg: 'selection',
+        currentArgKey: 'selection',
+        currentArgValue: '',
+        headerArguments: {
+          Selection: '',
+          Length: '',
+        },
+        stage: 'arguments',
+      })
+      await cmdBar.progressCmdBar()
+      await page.waitForTimeout(1000)
       await cmdBar.expectState({
         commandName: 'Chamfer',
         highlightedHeaderArg: 'length',
@@ -3205,6 +3260,8 @@ extrude001 = extrude(sketch001, length = 30)
         await test.step(`Go through the command bar flow with a preselected face (cap)`, async () => {
           await toolbar.shellButton.click()
           await cmdBar.progressCmdBar()
+          await page.waitForTimeout(500)
+          await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
             headerArguments: {
@@ -3599,7 +3656,7 @@ profile001 = startProfile(sketch001, at = [-20, 20])
       const initialCode = `
 sketch001 = startSketchOn(XZ)
 |> startProfile(at = [-100.0, 100.0])
-|> angledLine(angle = 0, length = 200.0, tag = $rectangleSegmentA001)
+|> angledLine(angle = 0deg, length = 200.0, tag = $rectangleSegmentA001)
 |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 200, tag = $rectangleSegmentB001)
 |> angledLine(
 angle=segAng(rectangleSegmentA001),
@@ -3611,7 +3668,7 @@ tag=$rectangleSegmentC001,
 extrude001 = extrude(sketch001, length = 200)
 sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
 |> startProfile(at = [-66.77, 84.81])
-|> angledLine(angle = 180, length = 27.08, tag = $rectangleSegmentA002)
+|> angledLine(angle = 180deg, length = 27.08, tag = $rectangleSegmentA002)
 |> angledLine(
 angle=segAng(rectangleSegmentA002) - 90,
 length=27.8,
@@ -3634,19 +3691,18 @@ tag=$rectangleSegmentC002,
       await scene.settled(cmdBar)
 
       // select line of code
-      const codeToSelection = `startProfile(at = [-66.77, 84.81])`
+      const codeToSelection = `segAng(rectangleSegmentA002) - 90,`
       // revolve
       await editor.scrollToText(codeToSelection)
       await page.getByText(codeToSelection).click()
-      // Wait for the selection to register (TODO: we need a definitive way to wait for this)
-      await page.waitForTimeout(200)
       await toolbar.revolveButton.click()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
 
-      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = X)`
+      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360deg, axis = X)`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
 
       // Edit flow
@@ -3679,7 +3735,7 @@ tag=$rectangleSegmentC002,
       await cmdBar.progressCmdBar()
       await toolbar.closePane('feature-tree')
       await editor.expectEditor.toContain(
-        newCodeToFind.replace('angle = 360', 'angle = ' + newAngle)
+        newCodeToFind.replace('angle = 360deg', 'angle = ' + newAngle)
       )
     })
     test('revolve surface around edge from an extruded solid2d', async ({
@@ -3693,7 +3749,7 @@ tag=$rectangleSegmentC002,
     }) => {
       const initialCode = `sketch001 = startSketchOn(XZ)
   |> startProfile(at = [-102.57, 101.72])
-  |> angledLine(angle = 0, length = 202.6, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 202.6, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 202.6, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -3719,13 +3775,13 @@ sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
       await toolbar.revolveButton.click()
       await cmdBar.progressCmdBar()
       await page.getByText('Edge', { exact: true }).click()
-      const lineCodeToSelection = `angledLine(angle = 0, length = 202.6, tag = $rectangleSegmentA001)`
+      const lineCodeToSelection = `angledLine(angle = 0deg, length = 202.6, tag = $rectangleSegmentA001)`
       await page.getByText(lineCodeToSelection).click()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
 
-      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = rectangleSegmentA001)`
+      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360deg, axis = rectangleSegmentA001)`
       await editor.expectEditor.toContain(newCodeToFind)
 
       // Edit flow
@@ -3763,7 +3819,7 @@ sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
       await toolbar.closePane('feature-tree')
       await editor.expectEditor.toContain('angle001 = ' + newAngle)
       await editor.expectEditor.toContain(
-        newCodeToFind.replace('angle = 360', 'angle = angle001')
+        newCodeToFind.replace('angle = 360deg', 'angle = angle001')
       )
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
     })
@@ -3782,7 +3838,7 @@ sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
       |> xLine(length = 2.6)
     sketch001 = startSketchOn(-XY)
       |> startProfile(at = [-0.48, 1.25])
-      |> angledLine(angle = 0, length = 2.38, tag = $rectangleSegmentA001)
+      |> angledLine(angle = 0deg, length = 2.38, tag = $rectangleSegmentA001)
       |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2.4, tag = $rectangleSegmentB001)
       |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
       |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -3820,7 +3876,7 @@ sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
 
-      const newCodeToFind = `revolve001 = revolve(sketch003, angle = 360, axis = seg01)`
+      const newCodeToFind = `revolve001 = revolve(sketch003, angle = 360deg, axis = seg01)`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
 
       // Edit flow
@@ -3853,7 +3909,7 @@ sketch002 = startSketchOn(extrude001, face = rectangleSegmentA001)
       await cmdBar.progressCmdBar()
       await toolbar.closePane('feature-tree')
       await editor.expectEditor.toContain(
-        newCodeToFind.replace('angle = 360', 'angle = ' + newAngle)
+        newCodeToFind.replace('angle = 360deg', 'angle = ' + newAngle)
       )
     })
   })
@@ -4573,12 +4629,24 @@ path001 = startProfile(sketch001, at = [0, 0])
 
     await test.step('Go through command bar flow', async () => {
       await toolbar.extrudeButton.click()
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'sketches',
+        currentArgValue: '',
+        headerArguments: {
+          Sketches: '',
+          Length: '',
+        },
+        highlightedHeaderArg: 'sketches',
+        commandName: 'Extrude',
+      })
+      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'length',
         currentArgValue: '5',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           Length: '',
         },
         highlightedHeaderArg: 'length',
@@ -4589,7 +4657,7 @@ path001 = startProfile(sketch001, at = [0, 0])
       await cmdBar.expectState({
         stage: 'review',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           Length: '1',
         },
         commandName: 'Extrude',
@@ -4655,12 +4723,25 @@ path001 = startProfile(sketch001, at = [0, 0])
 
     await test.step('Go through command bar flow', async () => {
       await toolbar.sweepButton.click()
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'sketches',
+        currentArgValue: '',
+        headerArguments: {
+          Sketches: '',
+          Path: '',
+          Sectional: '',
+        },
+        highlightedHeaderArg: 'sketches',
+        commandName: 'Sweep',
+      })
+      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'path',
         currentArgValue: '',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           Path: '',
           Sectional: '',
         },
@@ -4673,7 +4754,7 @@ path001 = startProfile(sketch001, at = [0, 0])
       await cmdBar.expectState({
         stage: 'review',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           Path: '1 segment',
           Sectional: '',
         },
@@ -4739,12 +4820,25 @@ path001 = startProfile(sketch001, at = [0, 0])
     await test.step('Go through command bar flow', async () => {
       await toolbar.closePane('code')
       await toolbar.revolveButton.click()
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'sketches',
+        currentArgValue: '',
+        headerArguments: {
+          Sketches: '',
+          AxisOrEdge: '',
+          Angle: '',
+        },
+        highlightedHeaderArg: 'sketches',
+        commandName: 'Revolve',
+      })
+      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'axisOrEdge',
         currentArgValue: '',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           AxisOrEdge: '',
           Angle: '',
         },
@@ -4760,7 +4854,7 @@ path001 = startProfile(sketch001, at = [0, 0])
         currentArgKey: 'angle',
         currentArgValue: '360',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           AxisOrEdge: 'Edge',
           Edge: '1 segment',
           Angle: '',
@@ -4773,7 +4867,7 @@ path001 = startProfile(sketch001, at = [0, 0])
       await cmdBar.expectState({
         stage: 'review',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           AxisOrEdge: 'Edge',
           Edge: '1 segment',
           Angle: '180',
@@ -4799,7 +4893,7 @@ path001 = startProfile(sketch001, at = [0, 0])
       await page.getByTestId('context-menu-delete').click()
       await scene.settled(cmdBar)
       await editor.expectEditor.not.toContain(
-        `revolve001 = revolve([profile001, profile002], axis = XY, angle = 180)`,
+        `revolve001 = revolve([profile001, profile002], axis = XY, angle = 180deg)`,
         { shouldNormalise: true }
       )
     })

e2e/playwright/prompt-to-edit-snapshot-tests.spec.ts

@@ -47,7 +47,7 @@ b
 
 const importedFile = `sketch003 = startSketchOn(XY)
   |> startProfile(at = [52.92, 157.81])
-  |> angledLine(angle = 0, length = 176.4, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 176.4, tag = $rectangleSegmentA001)
   |> angledLine(
        angle = segAng(rectangleSegmentA001) - 90,
        length = 53.4,
@@ -99,8 +99,6 @@ test.describe('edit with AI example snapshots', () => {
       await test.step('fire off edit prompt', async () => {
         await cmdBar.captureTextToCadRequestSnapshot(test.info())
         await cmdBar.openCmdBar('promptToEdit')
-        await page.waitForTimeout(100)
-        await cmdBar.progressCmdBar()
         // being specific about the color with a hex means asserting pixel color is more stable
         await page
           .getByTestId('cmd-bar-arg-value')

e2e/playwright/prompt-to-edit.spec.ts

@@ -23,7 +23,7 @@ sketch002 = startSketchOn(XZ)
 extrude002 = extrude(sketch002, length = 50)
 sketch003 = startSketchOn(XY)
   |> startProfile(at = [52.92, 157.81])
-  |> angledLine(angle = 0, length = 176.4, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 176.4, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 53.4, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -88,8 +88,6 @@ test.describe('Prompt-to-edit tests', () => {
 
         await test.step('fire off edit prompt', async () => {
           await cmdBar.openCmdBar('promptToEdit')
-          await page.waitForTimeout(100)
-          await cmdBar.progressCmdBar()
           // being specific about the color with a hex means asserting pixel color is more stable
           await page
             .getByTestId('cmd-bar-arg-value')
@@ -167,8 +165,6 @@ test.describe('Prompt-to-edit tests', () => {
 
     await test.step('fire of bad prompt', async () => {
       await cmdBar.openCmdBar('promptToEdit')
-      await page.waitForTimeout(100)
-      await cmdBar.progressCmdBar()
       await page
         .getByTestId('cmd-bar-arg-value')
         .fill('ansheusha asnthuatshoeuhtaoetuhthaeu laughs in dvorak')

e2e/playwright/regression-tests.spec.ts

@@ -72,7 +72,7 @@ Internal engine error on request`
         'persistCode',
         `sketch001 = startSketchOn(XY)
   |> startProfile(at = [82.33, 238.21])
-  |> angledLine(angle = 0, length = 288.63, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 288.63, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 197.97, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -245,7 +245,7 @@ extrude001 = extrude(sketch001, length = 50)
         'persistCode',
         `exampleSketch = startSketchOn(XZ)
       |> startProfile(at = [0, 0])
-      |> angledLine(angle = 50, length = 45 )
+      |> angledLine(angle = 50deg, length = 45 )
       |> yLine(endAbsolute = 0)
       |> close()
       |>
@@ -301,7 +301,7 @@ extrude001 = extrude(sketch001, length = 50)
       page.locator('.cm-content')
     ).toContainText(`exampleSketch = startSketchOn(XZ)
       |> startProfile(at = [0, 0])
-      |> angledLine(angle = 50, length = 45 )
+      |> angledLine(angle = 50deg, length = 45 )
       |> yLine(endAbsolute = 0)
       |> close()
 
@@ -321,7 +321,7 @@ extrude001 = extrude(sketch001, length = 50)
             `@settings(defaultLengthUnit = mm)
 sketch002 = startSketchOn(XY)
 profile002 = startProfile(sketch002, at = [72.24, -52.05])
-  |> angledLine(angle = 0, length = 181.26, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 181.26, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 21.54)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -458,10 +458,12 @@ extrude002 = extrude(profile002, length = 150)
 
       // Click the stl.
       await expect(stlOption).toBeVisible()
+
       await page.keyboard.press('Enter')
 
       // Click the checkbox
       await expect(submitButton).toBeVisible()
+
       await page.keyboard.press('Enter')
 
       // Find the toast.
@@ -469,13 +471,11 @@ extrude002 = extrude(profile002, length = 150)
       await expect(exportingToastMessage).toBeVisible()
 
       // Expect it to succeed.
-      await expect(exportingToastMessage).not.toBeVisible()
+      await expect(exportingToastMessage).not.toBeVisible({ timeout: 15_000 })
       await expect(engineErrorToastMessage).not.toBeVisible()
 
       const successToastMessage = page.getByText(`Exported successfully`)
-      await page.waitForTimeout(1_000)
-      const count = await successToastMessage.count()
-      await expect(count).toBeGreaterThanOrEqual(1)
+      await expect(successToastMessage).toBeVisible()
     }
   )
   // We updated this test such that you can have multiple exports going at once.

e2e/playwright/sketch-tests.spec.ts

@@ -995,8 +995,8 @@ profile001 = startProfile(sketch001, at = [${roundOff(scale * 69.6)}, ${roundOff
     await u.expectCmdLog('[data-message-type="execution-done"]')
     await u.closeDebugPanel()
 
-    // click profile in code
-    await page.getByText(`startProfile(at = [-0.45, 0.87])`).click()
+    // click "line(end = [1.32, 0.38])"
+    await page.getByText(`line(end = [1.32, 0.38])`).click()
     await page.waitForTimeout(100)
     await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeEnabled(
       { timeout: 10_000 }
@@ -1014,13 +1014,14 @@ profile001 = startProfile(sketch001, at = [${roundOff(scale * 69.6)}, ${roundOff
     // click extrude
     await toolbar.extrudeButton.click()
 
-    // sketch selection should already have been made.
+    // sketch selection should already have been made. "Sketches: 1 face" only show up when the selection has been made already
     // otherwise the cmdbar would be waiting for a selection.
+    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'arguments',
       currentArgKey: 'length',
       currentArgValue: '5',
-      headerArguments: { Profiles: '1 profile', Length: '' },
+      headerArguments: { Sketches: '1 segment', Length: '' },
       highlightedHeaderArg: 'length',
       commandName: 'Extrude',
     })
@@ -1221,7 +1222,7 @@ profile001 = startProfile(sketch001, at = [299.72, 230.82])
       fn lug(origin, length, diameter, plane) {
         lugSketch = startSketchOn(plane)
           |> startProfile(at = [origin[0] + lugDiameter / 2, origin[1]])
-          |> angledLine(angle = 60, lengthY = lugHeadLength)
+          |> angledLine(angle = 60deg, lengthY = lugHeadLength)
           |> xLine(endAbsolute = 0 + .001)
           |> yLine(endAbsolute = 0)
           |> close()
@@ -1286,7 +1287,7 @@ extrude001 = extrude(profile001, length = 200)
   |> translate(x = 3.14, y = 3.14, z = -50.154)
 sketch002 = startSketchOn(XY)
 profile002 = startProfile(sketch002, at = [72.2, -52.05])
-  |> angledLine(angle = 0, length = 181.26, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 181.26, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 21.54)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $mySeg)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg01)
@@ -2057,7 +2058,7 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       )
       await crnRect1point2()
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0, length = 2.37, tag = $rectangleSegmentA001)
+        `|> angledLine(angle = 0deg, length = 2.37, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 7.8)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2072,7 +2073,7 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       await crnRect2point2()
       await page.waitForTimeout(300)
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0, length = 5.49, tag = $rectangleSegmentA002)
+        `|> angledLine(angle = 0deg, length = 5.49, tag = $rectangleSegmentA002)
   |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 4.14)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2091,7 +2092,7 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       await cntrRect1point2()
       await page.waitForTimeout(300)
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0, length = 7.06, tag = $rectangleSegmentA003)
+        `|> angledLine(angle = 0deg, length = 7.06, tag = $rectangleSegmentA003)
   |> angledLine(angle = segAng(rectangleSegmentA003) + 90, length = 4.34)
   |> angledLine(angle = segAng(rectangleSegmentA003), length = -segLen(rectangleSegmentA003))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2107,7 +2108,7 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       await cntrRect2point2()
       await page.waitForTimeout(300)
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0, length = 3.12, tag = $rectangleSegmentA004)
+        `|> angledLine(angle = 0deg, length = 3.12, tag = $rectangleSegmentA004)
   |> angledLine(angle = segAng(rectangleSegmentA004) + 90, length = 6.24)
   |> angledLine(angle = segAng(rectangleSegmentA004), length = -segLen(rectangleSegmentA004))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2257,7 +2258,7 @@ profile001 = startProfile(sketch001, at = [6.24, 4.54])
   |> line(end = [8.61, 0.74])
   |> line(end = [10.99, -5.22])
 profile002 = startProfile(sketch001, at = [11.19, 5.02])
-  |> angledLine(angle = 0, length = 10.78, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 10.78, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 4.14)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2369,7 +2370,7 @@ profile004 = circleThreePoint(sketch001, p1 = [13.44, -6.8], p2 = [13.39, -2.07]
       await page.waitForTimeout(100)
       await rectEnd()
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 180, length = 1.97, tag = $rectangleSegmentA002)
+        `|> angledLine(angle = 180deg, length = 1.97, tag = $rectangleSegmentA002)
   |> angledLine(angle = segAng(rectangleSegmentA002) + 90, length = 3.89)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2395,7 +2396,7 @@ profile001 = startProfile(sketch001, at = [6.24, 4.54])
   |> line(end = [8.61, 0.74])
   |> line(end = [10.99, -5.22])
 profile002 = startProfile(sketch001, at = [11.19, 5.02])
-  |> angledLine(angle = 0, length = 10.78, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 10.78, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 4.14)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2500,7 +2501,7 @@ profile001 = startProfile(sketch001, at = [-63.43, 193.08])
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 profile003 = startProfile(sketch001, at = [16.79, 38.24])
-  |> angledLine(angle = 0, length = 182.82, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 182.82, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 105.71)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2725,7 +2726,7 @@ profile002 = startProfile(sketch002, at = [0.75, 13.46])
   |> line(end = [4.52, 3.79])
   |> line(end = [5.98, -2.81])
 profile003 = startProfile(sketch002, at = [3.19, 13.3])
-  |> angledLine(angle = 0, length = 6.64, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 6.64, tag = $rectangleSegmentA001)
   |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2.81)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -2743,7 +2744,7 @@ profile006 = startProfile(sketch002, at = [9.65, 3.82])
   |> close()
 revolve001 = revolve(
   profile004,
-  angle = 45,
+  angle = 45deg,
   axis = getNextAdjacentEdge(seg01)
 )
 extrude002 = extrude(profile006, length = 4)
@@ -2767,14 +2768,14 @@ profile010 = circle(
   radius = 2.67
 )
 profile011 = startProfile(sketch003, at = [5.07, -6.39])
-  |> angledLine(angle = 0, length = 4.54, tag = $rectangleSegmentA002)
+  |> angledLine(angle = 0deg, length = 4.54, tag = $rectangleSegmentA002)
   |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 4.17)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 extrude003 = extrude(profile011, length = 2.5)
 // TODO this breaks the test,
-// revolve002 = revolve(profile008, angle = 45, axis = seg02)
+// revolve002 = revolve(profile008, angle = 45deg, axis = seg02)
 `
       )
     })
@@ -2920,7 +2921,7 @@ loft([profile001, profile002])
     )
     await rect1Crn2()
     await editor.expectEditor.toContain(
-      `angledLine(angle = 0, length = 113.01, tag = $rectangleSegmentA001)`
+      `angledLine(angle = 0deg, length = 113.01, tag = $rectangleSegmentA001)`
     )
   })
   test('Can enter sketch loft edges offsetPlane and continue sketch', async ({
@@ -2989,7 +2990,7 @@ loft([profile001, profile002])
     )
     await rect1Crn2()
     await editor.expectEditor.toContain(
-      `angledLine(angle = 0, length = 106.42], tag = $rectangleSegmentA001)`
+      `angledLine(angle = 0deg, length = 106.42], tag = $rectangleSegmentA001)`
     )
     await page.waitForTimeout(100)
   })
@@ -3211,7 +3212,7 @@ test.describe('manual edits during sketch mode', () => {
     extrude001 = extrude(profile001, length = 500)
     sketch002 = startSketchOn(extrude001, face = seg01)
     profile002 = startProfile(sketch002, at = [83.39, 329.15])
-      |> angledLine(angle = 0, length = 119.61, tag = $rectangleSegmentA001)
+      |> angledLine(angle = 0deg, length = 119.61, tag = $rectangleSegmentA001)
       |> angledLine(length = 156.54, angle = -28)
       |> angledLine(
           angle = -151,
@@ -3347,7 +3348,7 @@ profile001 = startProfile(sketch001, at = [106.68, 89.77])
 extrude001 = extrude(profile001, length = 500)
 sketch002 = startSketchOn(extrude001, face = seg01)
 profile002 = startProfile(sketch002, at = [83.39, 329.15])
-  |> angledLine(angle = 0, length = 119.61, tag = $rectangleSegmentA001)
+  |> angledLine(angle = 0deg, length = 119.61, tag = $rectangleSegmentA001)
   |> angledLine(length = 219.2, angle = -56)
   |> angledLine(angle = -151, length = 116.27)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -3386,7 +3387,7 @@ profile003 = startProfile(sketch002, at = [-201.08, 254.17])
     extrude001 = extrude(profile001, length = 500)
     sketch002 = startSketchOn(extrude001, face = seg01)
     profile002 = startProfile(sketch002, at = [83.39, 329.15])
-      |> angledLine(angle = 0, length = 119.61, tag = $rectangleSegmentA001)
+      |> angledLine(angle = 0deg, length = 119.61, tag = $rectangleSegmentA001)
       |> angledLine(length = 156.54, angle = -28)
       |> angledLine(
            angle = -151,

e2e/playwright/snapshot-tests.spec.ts

@@ -845,7 +845,7 @@ test.describe('code color goober', { tag: '@snapshot' }, () => {
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc(angle = 90deg, radius = 5)
   |> line(end = [-3, 0])
   |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
@@ -889,7 +889,7 @@ sweepSketch = startSketchOn(XY)
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc(angle = 90deg, radius = 5)
   |> line(end = [-3, 0])
   |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])
@@ -934,7 +934,7 @@ sweepSketch = startSketchOn(XY)
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc(angle = 90deg, radius = 5)
   |> line(end = [-3, 0])
   |> tangentialArc(angle = -90, radius = 5)
   |> line(end = [0, 7])