Remove flaky file test that is redundant with others

.github/workflows/build-wasm.yml

@@ -1,56 +0,0 @@
-name: Build WASM
-
-on:
-  workflow_call:
-
-permissions:
-  contents: read
-
-jobs:
-  npm-build-wasm:
-    runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
-    steps:
-      - uses: actions/checkout@v4
-
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'npm'
-
-      - name: Install dependencies
-        run: npm install
-
-      - name: Use correct Rust toolchain
-        shell: bash
-        run: |
-          [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
-
-      - name: Install rust
-        uses: actions-rust-lang/setup-rust-toolchain@v1
-        with:
-          cache: false # configured below
-
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
-        with:
-          tool: wasm-pack
-
-      - name: Use Rust cache
-        uses: Swatinem/rust-cache@v2
-        with:
-          workspaces: './rust'
-
-      - name: Build Wasm
-        shell: bash
-        run: npm run build:wasm
-
-      - uses: actions/upload-artifact@v4
-        with:
-          name: prepared-wasm
-          path: |
-            rust/kcl-wasm-lib/pkg/kcl_wasm_lib*
-
-      - uses: actions/upload-artifact@v4
-        with:
-          name: prepared-ts-rs-bindings
-          path: |
-            rust/kcl-lib/bindings/*

.github/workflows/cargo-test.yml

@@ -88,7 +88,6 @@ jobs:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN_DEV}}
           ZOO_HOST: https://api.dev.zoo.dev
           RUST_BACKTRACE: full
-          RUST_MIN_STACK: 10485760000
       - name: Commit differences
         if: steps.path-changes.outputs.outside-kcl-samples == 'false' && steps.cargo-test-kcl-samples.outcome == 'failure'
         shell: bash
@@ -120,7 +119,6 @@ jobs:
           # Configure nextest when it's run by insta (via just).
           NEXTEST_PROFILE: ci
           RUST_BACKTRACE: full
-          RUST_MIN_STACK: 10485760000
       - name: Build and archive tests
         run: |
           cd rust
@@ -157,7 +155,7 @@ jobs:
         shell: bash
         run: |
           [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
-      - name: Install Rust
+      - name: Install rust
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
@@ -184,7 +182,6 @@ jobs:
         env:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN_DEV}}
           ZOO_HOST: https://api.dev.zoo.dev
-          RUST_MIN_STACK: 10485760000
       - name: Upload results
         if: always()
         run: .github/ci-cd-scripts/upload-results.sh
@@ -193,55 +190,6 @@ jobs:
           TAB_API_KEY: ${{ secrets.TAB_API_KEY }}
           CI_COMMIT_SHA: ${{ github.event.pull_request.head.sha }}
           CI_PR_NUMBER: ${{ github.event.pull_request.number }}
-  run-internal-kcl-samples:
-    name: cargo test (internal-kcl-samples)
-    runs-on:
-      - runs-on=${{ github.run_id }}
-      - runner=32cpu-linux-x64
-      - extras=s3-cache
-    steps:
-      - uses: runs-on/action@v1
-      - uses: actions/create-github-app-token@v1
-        id: app-token
-        with:
-          app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
-          private-key: ${{ secrets.MODELING_APP_GH_APP_PRIVATE_KEY }}
-          owner: ${{ github.repository_owner }}
-      - uses: actions/checkout@v4
-        with:
-          token: ${{ steps.app-token.outputs.token }}
-      - name: Use correct Rust toolchain
-        shell: bash
-        run: |
-          [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
-      - name: Install Rust
-        uses: actions-rust-lang/setup-rust-toolchain@v1
-        with:
-          cache: false # Configured below.
-      - name: Start Vector
-        run: .github/ci-cd-scripts/start-vector-ubuntu.sh
-        env:
-          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
-          OS_NAME: ${{ env.OS_NAME }}
-      - uses: taiki-e/install-action@nextest
-      - name: Download internal KCL samples
-        run: git clone --depth=1 https://x-access-token:${{ secrets.GH_PAT_KCL_SAMPLES_INTERNAL }}@github.com/KittyCAD/kcl-samples-internal public/kcl-samples/internal
-      - name: Run tests
-        shell: bash
-        run: |-
-          cd rust/kcl-lib
-          cargo nextest run \
-           --retries=10 --no-fail-fast --features artifact-graph --profile=ci \
-           internal \
-           2>&1 | tee /tmp/github-actions.log
-        env:
-          TWENTY_TWENTY: overwrite
-          INSTA_UPDATE: always
-          EXPECTORATE: overwrite
-          KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN_DEV}}
-          ZOO_HOST: https://api.dev.zoo.dev
-          MODELING_APP_INTERNAL_SAMPLES_SECRET: ${{secrets.MODELING_APP_INTERNAL_SAMPLES_SECRET}}
-          RUST_MIN_STACK: 10485760000
   run-wasm-tests:
     name: Run wasm tests
     strategy:

.github/workflows/e2e-tests.yml

@@ -167,6 +167,32 @@ jobs:
           retention-days: 30
           overwrite: true
 
+      - name: Check diff
+        if: ${{ github.ref != 'refs/heads/main' }}
+        shell: bash
+        id: git-check
+        run: |
+            git add e2e/playwright/snapshot-tests.spec.ts-snapshots e2e/playwright/snapshots
+            if git status | grep -q "Changes to be committed"
+            then echo "modified=true" >> $GITHUB_OUTPUT
+            else echo "modified=false" >> $GITHUB_OUTPUT
+            fi
+
+      - name: Commit changes
+        if: ${{ steps.git-check.outputs.modified == 'true' }}
+        shell: bash
+        run: |
+          git add e2e/playwright/snapshot-tests.spec.ts-snapshots e2e/playwright/snapshots
+          git config --local user.email "github-actions[bot]@users.noreply.github.com"
+          git config --local user.name "github-actions[bot]"
+          git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
+          git fetch origin
+          echo ${{ github.head_ref }}
+          git checkout ${{ github.head_ref }}
+          git commit --message "Update snapshots" || true
+          git push
+          git push origin ${{ github.head_ref }}
+
   electron:
     needs: [prepare-wasm]
     timeout-minutes: 60

.github/workflows/kcl-language-server.yml

@@ -21,11 +21,14 @@ on:
       - '**.rs'
       - .github/workflows/kcl-language-server.yml
   workflow_dispatch:
+
 permissions:
   contents: read
+
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
+
 env:
   CARGO_INCREMENTAL: 0
   CARGO_NET_RETRY: 10
@@ -35,9 +38,10 @@ env:
   MACOSX_DEPLOYMENT_TARGET: 10.15
   CARGO_TARGET_AARCH64_UNKNOWN_LINUX_GNU_LINKER: aarch64-linux-gnu-gcc
   CARGO_TARGET_ARM_UNKNOWN_LINUX_GNUEABIHF_LINKER: arm-linux-gnueabihf-gcc
+
 jobs:
   test:
-    name: kcl-language-server (vscode tests)
+    name: vscode tests
     strategy:
       fail-fast: false
       matrix:
@@ -73,20 +77,22 @@ jobs:
         include:
           - os: windows-latest
             target: x86_64-pc-windows-msvc
-            code-target: win32-x64
-            #- os: windows-latest
-            #target: i686-pc-windows-msvc
-            #code-target:
-            #win32-ia32
-            #- os: windows-latest
-            #target: aarch64-pc-windows-msvc
-            #code-target: win32-arm64
+            code-target:
+              win32-x64
+              #- os: windows-latest
+              #target: i686-pc-windows-msvc
+              #code-target:
+              #win32-ia32
+              #- os: windows-latest
+              #target: aarch64-pc-windows-msvc
+              #code-target: win32-arm64
           - os: ubuntu-latest
             target: x86_64-unknown-linux-gnu
-            code-target: linux-x64
-            #- os: ubuntu-latest
-            #target: aarch64-unknown-linux-musl
-            #code-target: linux-arm64
+            code-target:
+              linux-x64
+              #- os: ubuntu-latest
+              #target: aarch64-unknown-linux-musl
+              #code-target: linux-arm64
           - os: ubuntu-latest
             target: aarch64-unknown-linux-gnu
             code-target: linux-arm64
@@ -99,33 +105,41 @@ jobs:
           - os: macos-latest
             target: aarch64-apple-darwin
             code-target: darwin-arm64
-    name: kcl-language-server build-release (${{ matrix.target }})
+
+    name: build-release (${{ matrix.target }})
     runs-on: ${{ matrix.os }}
     container: ${{ matrix.container }}
+
     env:
       RA_TARGET: ${{ matrix.target }}
+
     steps:
       - name: Checkout repository
         uses: actions/checkout@v4
         with:
           fetch-depth: ${{ env.FETCH_DEPTH }}
+
       - name: Use correct Rust toolchain
         shell: bash
         run: |
           rm rust/rust-toolchain.toml
+
       - name: Install rust
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: rust
           components: rust-src
           target: ${{ matrix.target }}
+
       - name: Install Node.js
         uses: actions/setup-node@v4
         with:
           node-version-file: ".nvmrc"
+
       - name: Update apt repositories
         if: matrix.target == 'aarch64-unknown-linux-gnu' || matrix.target == 'arm-unknown-linux-gnueabihf' || matrix.os == 'ubuntu-latest'
         run: sudo apt-get update
+
       - if: ${{ matrix.os == 'ubuntu-latest' }}
         name: Install deps
         shell: bash
@@ -150,53 +164,64 @@ jobs:
             zlib1g-dev
 
           cargo install cross
+
       - name: Install AArch64 target toolchain
         if: matrix.target == 'aarch64-unknown-linux-gnu'
         run: sudo apt-get install gcc-aarch64-linux-gnu
+
       - name: Install ARM target toolchain
         if: matrix.target == 'arm-unknown-linux-gnueabihf'
         run: sudo apt-get install gcc-arm-linux-gnueabihf
+
       - name: build
         run: |
           cd rust
           cargo kcl-language-server-release build --client-patch-version ${{ github.run_number }}
+
       - name: Install dependencies
         run: |
           cd rust/kcl-language-server
           # npm will symlink which will cause issues w tarballing later
           yarn install
+
       - name: Package Extension (release)
         if: startsWith(github.event.ref, 'refs/tags/')
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o "../build/kcl-language-server-${{ matrix.code-target }}.vsix" --target ${{ matrix.code-target }}
+
       - name: Package Extension (nightly)
         if: startsWith(github.event.ref, 'refs/tags/') == false
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o "../build/kcl-language-server-${{ matrix.code-target }}.vsix" --target ${{ matrix.code-target }} --pre-release
+
       - name: remove server
         if: matrix.target == 'x86_64-unknown-linux-gnu'
         run: |
           cd rust/kcl-language-server
           rm -rf server
+
       - name: Package Extension (no server, release)
         if: matrix.target == 'x86_64-unknown-linux-gnu' && startsWith(github.event.ref, 'refs/tags/')
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o ../build/kcl-language-server-no-server.vsix
+
       - name: Package Extension (no server, nightly)
         if: matrix.target == 'x86_64-unknown-linux-gnu' && startsWith(github.event.ref, 'refs/tags/') == false
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o ../build/kcl-language-server-no-server.vsix --pre-release
+
       - name: Upload artifacts
         uses: actions/upload-artifact@v4
         with:
           name: release-${{ matrix.target }}
           path: ./rust/build
+
   build-release-x86_64-unknown-linux-musl:
-    name: kcl-language-server build-release (x86_64-unknown-linux-musl)
+    name: build-release (x86_64-unknown-linux-musl)
     runs-on: ubuntu-latest
     env:
       RA_TARGET: x86_64-unknown-linux-musl
@@ -206,6 +231,7 @@ jobs:
       image: alpine:latest
       volumes:
         - /usr/local/cargo/registry:/usr/local/cargo/registry
+
     steps:
       - name: Install dependencies
         run: |
@@ -219,46 +245,55 @@ jobs:
             nodejs \
             npm \
             yarn
+
       - name: Checkout repository
         uses: actions/checkout@v4
         with:
           fetch-depth: ${{ env.FETCH_DEPTH }}
+
       - name: Use correct Rust toolchain
         shell: bash
         run: |
           rm rust/rust-toolchain.toml
+
       - name: Install rust
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: rust
           components: rust-src
           target: ${{ matrix.target }}
+
       - name: build
         run: |
           cd rust
           cargo kcl-language-server-release build --client-patch-version ${{ github.run_number }}
+
       - name: Install dependencies
         run: |
           cd rust/kcl-language-server
           # npm will symlink which will cause issues w tarballing later
           yarn install
+
       - name: Package Extension (release)
         if: startsWith(github.event.ref, 'refs/tags/')
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o "../build/kcl-language-server-alpine-x64.vsix" --target alpine-x64
+
       - name: Package Extension (release)
         if: startsWith(github.event.ref, 'refs/tags/') == false
         run: |
           cd rust/kcl-language-server
           npx vsce package --yarn -o "../build/kcl-language-server-alpine-x64.vsix" --target alpine-x64 --pre-release
+
       - name: Upload artifacts
         uses: actions/upload-artifact@v4
         with:
           name: release-x86_64-unknown-linux-musl
           path: ./rust/build
+
   publish:
-    name: kcl-language-server (publish)
+    name: publish
     runs-on: ubuntu-latest
     needs: ["build-release", "build-release-x86_64-unknown-linux-musl"]
     if: startsWith(github.event.ref, 'refs/tags')
@@ -266,17 +301,22 @@ jobs:
       contents: write
     steps:
       - run: echo "TAG=${GITHUB_REF#refs/*/}" >> $GITHUB_ENV
+
       - run: 'echo "TAG: $TAG"'
+
       - name: Checkout repository
         uses: actions/checkout@v4
         with:
           fetch-depth: ${{ env.FETCH_DEPTH }}
+
       - name: Install Nodejs
         uses: actions/setup-node@v4
         with:
           node-version-file: ".nvmrc"
+
       - run: echo "HEAD_SHA=$(git rev-parse HEAD)" >> $GITHUB_ENV
       - run: 'echo "HEAD_SHA: $HEAD_SHA"'
+
       - uses: actions/download-artifact@v4
         with:
           name: release-aarch64-apple-darwin
@@ -304,29 +344,33 @@ jobs:
       - uses: actions/download-artifact@v4
         with:
           name: release-x86_64-pc-windows-msvc
-          path: rust/build
-          #- uses: actions/download-artifact@v4
-          #with:
-          #name: release-i686-pc-windows-msvc
-          #path:
-          #build
-          #- uses: actions/download-artifact@v4
-          #with:
-          #name: release-aarch64-pc-windows-msvc
-          #path: rust/build
+          path:
+            rust/build
+            #- uses: actions/download-artifact@v4
+            #with:
+            #name: release-i686-pc-windows-msvc
+            #path:
+            #build
+            #- uses: actions/download-artifact@v4
+            #with:
+            #name: release-aarch64-pc-windows-msvc
+            #path: rust/build
       - run: ls -al ./rust/build
+
       - name: Publish Release
         uses: ./.github/actions/github-release
         with:
           files: "rust/build/*"
           name: ${{ env.TAG }}
           token: ${{ secrets.GITHUB_TOKEN }}
+
       - name: move files to dir for upload
         shell: bash
         run: |
           cd rust
           mkdir -p releases/language-server/${{ env.TAG }}
           cp -r build/* releases/language-server/${{ env.TAG }}
+
       - name: "Authenticate to Google Cloud"
         uses: "google-github-actions/auth@v2.1.8"
         with:
@@ -341,12 +385,15 @@ jobs:
         with:
           path: rust/releases
           destination: dl.kittycad.io
+
       - run: rm rust/build/kcl-language-server-no-server.vsix
+
       - name: Publish Extension (Code Marketplace, release)
         # token from https://dev.azure.com/kcl-language-server/
         run: |
           cd rust/kcl-language-server
           npx vsce publish --pat ${{ secrets.VSCE_PAT }} --packagePath ../build/kcl-language-server-*.vsix
+
       - name: Publish Extension (OpenVSX, release)
         run: |
           cd rust/kcl-language-server

.github/workflows/kcl-python-bindings.yml

@@ -4,6 +4,7 @@
 #    maturin generate-ci github
 #
 name: kcl-python-bindings
+
 on:
   push:
     branches:
@@ -26,14 +27,16 @@ on:
       - '**.rs'
       - .github/workflows/kcl-python-bindings.yml
   workflow_dispatch:
+
 permissions:
   contents: read
+
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
+
 jobs:
   linux-x86_64:
-    name: kcl-python-bindings (linux-x86_64)
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
@@ -55,8 +58,8 @@ jobs:
         with:
           name: wheels-linux-x86_64
           path: rust/kcl-python-bindings/dist
+
   windows:
-    name: kcl-python-bindings (windows)
     runs-on: windows-16-cores
     strategy:
       matrix:
@@ -81,8 +84,8 @@ jobs:
         with:
           name: wheels-windows-${{ matrix.target }}
           path: rust/kcl-python-bindings/dist
+
   macos:
-    name: kcl-python-bindings (macos)
     runs-on: macos-latest
     strategy:
       matrix:
@@ -107,8 +110,8 @@ jobs:
         with:
           name: wheels-macos-${{ matrix.target }}
           path: rust/kcl-python-bindings/dist
+
   test:
-    name: kcl-python-bindings (test)
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
@@ -124,8 +127,8 @@ jobs:
         env:
           KITTYCAD_API_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
           ZOO_HOST: https://api.dev.zoo.dev
+
   sdist:
-    name: kcl-python-bindings (sdist)
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
@@ -133,10 +136,10 @@ jobs:
         uses: astral-sh/setup-uv@v5
       - name: Install codespell
         run: |
-          uv venv .venv
-          echo "VIRTUAL_ENV=.venv" >> $GITHUB_ENV
-          echo "$PWD/.venv/bin" >> $GITHUB_PATH
-          uv pip install pip --upgrade
+            uv venv .venv
+            echo "VIRTUAL_ENV=.venv" >> $GITHUB_ENV
+            echo "$PWD/.venv/bin" >> $GITHUB_PATH
+            uv pip install pip --upgrade
       - name: Build sdist
         uses: PyO3/maturin-action@v1
         with:
@@ -148,6 +151,7 @@ jobs:
         with:
           name: wheels-sdist
           path: rust/kcl-python-bindings/dist
+
   release:
     name: Release
     runs-on: ubuntu-latest
@@ -164,11 +168,11 @@ jobs:
         uses: astral-sh/setup-uv@v5
       - name: do uv things
         run: |
-          cd rust/kcl-python-bindings
-          uv venv .venv
-          echo "VIRTUAL_ENV=.venv" >> $GITHUB_ENV
-          echo "$PWD/.venv/bin" >> $GITHUB_PATH
-          uv pip install pip --upgrade
+            cd rust/kcl-python-bindings
+            uv venv .venv
+            echo "VIRTUAL_ENV=.venv" >> $GITHUB_ENV
+            echo "$PWD/.venv/bin" >> $GITHUB_PATH
+            uv pip install pip --upgrade
       - name: Publish to PyPI
         uses: PyO3/maturin-action@v1
         env:

.github/workflows/static-analysis.yml

@@ -28,7 +28,53 @@ jobs:
       - run: npm run fmt:check
 
   npm-build-wasm:
-    uses: ./.github/workflows/build-wasm.yml
+    # Build the wasm blob once on the fastest runner.
+    runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
+    steps:
+      - uses: actions/checkout@v4
+
+      - uses: actions/setup-node@v4
+        with:
+          node-version-file: '.nvmrc'
+          cache: 'npm'
+
+      - name: Install dependencies
+        run: npm install
+
+      - name: Use correct Rust toolchain
+        shell: bash
+        run: |
+          [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
+
+      - name: Install rust
+        uses: actions-rust-lang/setup-rust-toolchain@v1
+        with:
+          cache: false # Configured below.
+
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+        with:
+          tool: wasm-pack
+
+      - name: Rust Cache
+        uses: Swatinem/rust-cache@v2
+        with:
+          workspaces: './rust'
+
+      - name: Build Wasm
+        shell: bash
+        run: npm run build:wasm
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: prepared-wasm
+          path: |
+            rust/kcl-wasm-lib/pkg/kcl_wasm_lib*
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: prepared-ts-rs-bindings
+          path: |
+            rust/kcl-lib/bindings/*
 
   npm-tsc:
     runs-on: ubuntu-latest
@@ -127,3 +173,122 @@ jobs:
         uses: actions/checkout@v4
       - name: Run codespell
         uses: crate-ci/typos@v1.32.0
+
+  npm-unit-test-kcl-samples:
+    runs-on: ubuntu-latest
+    needs: npm-build-wasm
+    steps:
+      - uses: actions/checkout@v4
+
+      - uses: actions/setup-node@v4
+        with:
+          node-version-file: '.nvmrc'
+          cache: 'npm'
+
+      - run: npm install
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+        with:
+          tool: wasm-pack
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
+
+      - run: npm run simpleserver:bg
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+
+      - name: Install Chromium Browser
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+        run: npm run playwright install chromium --with-deps
+
+      - name: Download internal KCL samples
+        run: git clone --depth=1 https://x-access-token:${{ secrets.GH_PAT_KCL_SAMPLES_INTERNAL }}@github.com/KittyCAD/kcl-samples-internal public/kcl-samples/internal
+
+      - name: Regenerate KCL samples manifest
+        run: cd rust/kcl-lib && EXPECTORATE=overwrite cargo test generate_manifest
+
+      - name: Check public and internal KCL samples
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+        run: npm run test:unit:kcl-samples
+        env:
+          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
+
+  npm-unit-test:
+    runs-on: ubuntu-latest
+    needs: npm-build-wasm
+    steps:
+      - uses: actions/checkout@v4
+
+      - uses: actions/setup-node@v4
+        with:
+          node-version-file: '.nvmrc'
+          cache: 'npm'
+
+      - run: npm install
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+        with:
+          tool: wasm-pack
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
+
+      - run: npm run simpleserver:bg
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+
+      - name: Install Chromium Browser
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+        run: npm run playwright install chromium --with-deps
+
+      - name: Run unit tests
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+        run: xvfb-run -a npm run test:unit
+        env:
+          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
+
+      - name: Check for changes
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
+        id: git-check
+        run: |
+            git add src/lang/std/artifactMapGraphs
+            if git status src/lang/std/artifactMapGraphs | grep -q "Changes to be committed"
+            then echo "modified=true" >> $GITHUB_OUTPUT
+            else echo "modified=false" >> $GITHUB_OUTPUT
+            fi
+      - name: Commit changes, if any
+        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' && steps.git-check.outputs.modified == 'true' }}
+        run: |
+          git config --local user.email "github-actions[bot]@users.noreply.github.com"
+          git config --local user.name "github-actions[bot]"
+          git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
+          git fetch origin
+          echo ${{ github.head_ref }}
+          git checkout ${{ github.head_ref }}
+          # TODO when webkit works on ubuntu remove the os part of the commit message
+          git commit -am "Look at this (photo)Graph *in the voice of Nickelback*" || true
+          git push
+          git push origin ${{ github.head_ref }}

.github/workflows/unit-tests.yml

@@ -1,124 +0,0 @@
-name: Unit Tests
-
-on:
-  pull_request:
-  push:
-    branches:
-      - main
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-permissions:
-  contents: write
-  pull-requests: write
-  actions: read
-
-jobs:
-  npm-build-wasm:
-    uses: ./.github/workflows/build-wasm.yml
-
-  npm-test-unit:
-    runs-on: ubuntu-latest
-    needs: npm-build-wasm
-    steps:
-      - uses: actions/checkout@v4
-
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'npm'
-
-      - run: npm install
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
-        with:
-          tool: wasm-pack
-
-      - name: Download all artifacts
-        uses: actions/download-artifact@v4
-
-      - name: Copy prepared wasm
-        run: |
-          ls -R prepared-wasm
-          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
-          mkdir rust/kcl-wasm-lib/pkg
-          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
-
-      - name: Copy prepared ts-rs bindings
-        run: |
-          ls -R prepared-ts-rs-bindings
-          mkdir rust/kcl-lib/bindings
-          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
-
-      - run: npm run simpleserver:bg
-        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
-
-      - name: Install Chromium Browser
-        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
-        run: npm run playwright install chromium --with-deps
-
-      - name: Run unit tests
-        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
-        run: xvfb-run -a npm run test:unit
-        env:
-          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-
-      - name: Check for changes
-        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
-        id: git-check
-        run: |
-            git add src/lang/std/artifactMapGraphs
-            if git status src/lang/std/artifactMapGraphs | grep -q "Changes to be committed"
-            then echo "modified=true" >> $GITHUB_OUTPUT
-            else echo "modified=false" >> $GITHUB_OUTPUT
-            fi
-
-      - name: Commit changes, if any
-        if: ${{ github.event_name != 'release' && github.event_name != 'schedule' && steps.git-check.outputs.modified == 'true' }}
-        run: |
-          git config --local user.email "github-actions[bot]@users.noreply.github.com"
-          git config --local user.name "github-actions[bot]"
-          git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
-          git fetch origin
-          echo ${{ github.head_ref }}
-          git checkout ${{ github.head_ref }}
-          # TODO when webkit works on ubuntu remove the os part of the commit message
-          git commit -am "Look at this (photo)Graph *in the voice of Nickelback*" || true
-          git push
-          git push origin ${{ github.head_ref }}
-
-  npm-test-unit-components:
-    runs-on: ubuntu-latest
-    needs: npm-build-wasm
-    steps:
-      - uses: actions/checkout@v4
-
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'npm'
-
-      - run: npm install
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
-        with:
-          tool: wasm-pack
-
-      - name: Download all artifacts
-        uses: actions/download-artifact@v4
-
-      - name: Copy prepared wasm
-        run: |
-          ls -R prepared-wasm
-          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
-          mkdir rust/kcl-wasm-lib/pkg
-          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
-
-      - name: Copy prepared ts-rs bindings
-        run: |
-          ls -R prepared-ts-rs-bindings
-          mkdir rust/kcl-lib/bindings
-          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
-
-      - name: Run component tests
-        run: npm run test:unit:components

.gitignore

@@ -58,8 +58,6 @@ trace.zip
 /public/kcl-samples/.github
 /public/kcl-samples/screenshots/main.kcl
 /public/kcl-samples/step/main.kcl
-/public/kcl-samples/internal
-/rust/kcl-lib/tests/kcl_samples/internal
 /test-results/
 /playwright-report/
 /blob-report/

Makefile

@@ -114,6 +114,7 @@ test-unit: install ## Run the unit tests
 	npm run test:unit:components
 	@ curl -fs localhost:3000 >/dev/null || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
 	npm run test:unit
+	npm run test:unit:kcl-samples
 
 .PHONY: test-e2e
 test-e2e: test-e2e-$(TARGET)

README.md

@@ -42,6 +42,8 @@ The 3D view in Design Studio is just a video stream from our hosted geometry eng
 
 We recommend downloading the latest application binary from our [releases](https://github.com/KittyCAD/modeling-app/releases) page. If you don't see your platform or architecture supported there, please file an issue.
 
+If you'd like to try out upcoming changes sooner, you can also download those from our [nightly releases](https://zoo.dev/modeling-app/download/nightly) page.
+
 ## Developing
 
 Finally, if you'd like to run a development build or contribute to the project, please visit our [contributor guide](CONTRIBUTING.md) to get started.

_typos.toml

@@ -21,7 +21,7 @@ extend-exclude = [
 ]
 
 [default.extend-words]
-metalness = "metalness" # appearance API
+metalness = "metalness" # appearance API 
 Hom = "Hom" # short for homogenous
 typ = "typ" # used to declare a variable named 'type' which is a reserved keyword in Rust
 ue = "ue" # short for UnaryExpression
@@ -29,7 +29,6 @@ THRE = "THRE" # Weird bug that wrongly detects THREEjs as a typo
 nwo = "nwo" # don't know what this is about tbh
 "ot" = "ot" # some abbreviation, idk what
 "oe" = "oe" # some abbreviation, idk what
-"colinear" = "colinear" # some engine shit, kidding
 
 [default]
 extend-ignore-identifiers-re = [

docs/kcl-lang/index.md

@@ -4,7 +4,7 @@ excerpt: "Documentation of the KCL language for the Zoo Design Studio."
 layout: manual
 ---
 
-This is a reference for KCL. If you are learning KCL, you may prefer the [guide](https://zoo.dev/docs/kcl-book/intro.html) which explains
+This is a reference for KCL. If you are learning KCL, you may prefer the [guide]() which explains
 things in a more tutorial fashion. See also our documentation of the [standard library](/docs/kcl-std).
 
 ## Topics

docs/kcl-lang/modules.md

@@ -177,7 +177,7 @@ You can also import the whole module. This is useful if you want to use the
 result of a module as a variable, like a part.
 
 ```norun
-import "cube.kcl"
+import "tests/inputs/cube.kcl" as cube
 cube
   |> translate(x=10)
 ```
@@ -241,7 +241,7 @@ If you want to have multiple instances of the same object, you can use the
 [`clone`](/docs/kcl/clone) function. This will render a new instance of the object in memory.
 
 ```norun
-import cube from "cube.kcl"
+import cube from "tests/inputs/cube.kcl"
 
 cube  
   |> translate(x=10)
@@ -257,7 +257,7 @@ separate objects in memory, and can be manipulated independently.
 Here is an example with a file from another CAD system:
 
 ```kcl
-import "tests/inputs/cube.step"
+import "tests/inputs/cube.step" as cube
 
 cube
   |> translate(x=10)

docs/kcl-std/functions/std-array-reduce.md

@@ -12,7 +12,7 @@ reduce(
   @array: [any],
   initial: any,
   f: fn(any, accum: any): any,
-): any
+): [any]
 ```
 
 Take a starting value. Then, for each element of an array, calculate the next value,
@@ -28,7 +28,7 @@ using the previous value and the element.
 
 ### Returns
 
-[`any`](/docs/kcl-std/types/std-types-any)
+[`[any]`](/docs/kcl-std/types/std-types-any)
 
 
 ### Examples

docs/kcl-std/functions/std-math-legLen.md

@@ -11,7 +11,7 @@ Compute the length of the given leg.
 legLen(
   hypotenuse: number(Length),
   leg: number(Length),
-): number(Length)
+): number(deg)
 ```
 
 
@@ -25,7 +25,7 @@ legLen(
 
 ### Returns
 
-[`number(Length)`](/docs/kcl-std/types/std-types-number) - A number.
+[`number(deg)`](/docs/kcl-std/types/std-types-number) - A number.
 
 
 ### Examples

docs/kcl-std/functions/std-transform-mirror2d.md

@@ -14,6 +14,8 @@ mirror2d(
 ): Sketch
 ```
 
+Only works on unclosed sketches for now.
+
 Mirror occurs around a local sketch axis rather than a global axis.
 
 ### Arguments

docs/kcl-std/index.md

@@ -65,7 +65,7 @@ layout: manual
   * [`line`](/docs/kcl-std/line)
   * [`loft`](/docs/kcl-std/loft)
   * [`patternCircular2d`](/docs/kcl-std/patternCircular2d)
-  * [`patternTransform2d`](/docs/kcl-std/functions/std-sketch-patternTransform2d)
+  * [`patternTransform2d`](/docs/kcl-std/patternTransform2d)
   * [`polygon`](/docs/kcl-std/polygon)
   * [`profileStart`](/docs/kcl-std/profileStart)
   * [`profileStartX`](/docs/kcl-std/profileStartX)
@@ -94,7 +94,7 @@ layout: manual
   * [`intersect`](/docs/kcl-std/intersect)
   * [`patternCircular3d`](/docs/kcl-std/patternCircular3d)
   * [`patternLinear3d`](/docs/kcl-std/patternLinear3d)
-  * [`patternTransform`](/docs/kcl-std/functions/std-solid-patternTransform)
+  * [`patternTransform`](/docs/kcl-std/patternTransform)
   * [`shell`](/docs/kcl-std/functions/std-solid-shell)
   * [`subtract`](/docs/kcl-std/subtract)
   * [`union`](/docs/kcl-std/union)

docs/kcl-std/modules/std-sketch.md

@@ -30,7 +30,7 @@ This module contains functions for creating and manipulating sketches, and makin
 * [`line`](/docs/kcl-std/line)
 * [`loft`](/docs/kcl-std/loft)
 * [`patternCircular2d`](/docs/kcl-std/patternCircular2d)
-* [`patternTransform2d`](/docs/kcl-std/functions/std-sketch-patternTransform2d)
+* [`patternTransform2d`](/docs/kcl-std/patternTransform2d)
 * [`polygon`](/docs/kcl-std/polygon)
 * [`profileStart`](/docs/kcl-std/profileStart)
 * [`profileStartX`](/docs/kcl-std/profileStartX)

docs/kcl-std/modules/std-solid.md

@@ -18,7 +18,7 @@ This module contains functions for modifying solids, e.g., by adding a fillet or
 * [`intersect`](/docs/kcl-std/intersect)
 * [`patternCircular3d`](/docs/kcl-std/patternCircular3d)
 * [`patternLinear3d`](/docs/kcl-std/patternLinear3d)
-* [`patternTransform`](/docs/kcl-std/functions/std-solid-patternTransform)
+* [`patternTransform`](/docs/kcl-std/patternTransform)
 * [`shell`](/docs/kcl-std/functions/std-solid-shell)
 * [`subtract`](/docs/kcl-std/subtract)
 * [`union`](/docs/kcl-std/union)

docs/kcl-std/modules/std.md

@@ -11,7 +11,7 @@ Contains frequently used constants, functions for interacting with the KittyCAD
 
 The standard library is organised into modules (listed below), but most things are always available in KCL programs. 
 
-You might also want the [KCL language reference](/docs/kcl-lang) or the [KCL guide](https://zoo.dev/docs/kcl-book/intro.html). 
+You might also want the [KCL language reference](/docs/kcl-lang) or the [KCL guide](). 
 
 ## Modules
 

docs/kcl-std/patternCircular2d.md

@@ -12,8 +12,8 @@ patternCircular2d(
   @sketchSet: [Sketch],
   instances: number,
   center: Point2d,
-  arcDegrees?: number,
-  rotateDuplicates?: bool,
+  arcDegrees: number,
+  rotateDuplicates: bool,
   useOriginal?: bool,
 ): [Sketch]
 ```
@@ -27,8 +27,8 @@ patternCircular2d(
 | `sketchSet` | [`[Sketch]`](/docs/kcl-std/types/std-types-Sketch) | Which sketch(es) to pattern | Yes |
 | `instances` | [`number`](/docs/kcl-std/types/std-types-number) | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `center` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | The center about which to make the pattern. This is a 2D vector. | Yes |
-| `arcDegrees` | [`number`](/docs/kcl-std/types/std-types-number) | The arc angle (in degrees) to place the repetitions. Must be greater than 0. Defaults to 360. | No |
-| `rotateDuplicates` | [`bool`](/docs/kcl-std/types/std-types-bool) | Whether or not to rotate the duplicates as they are copied. Defaults to true. | No |
+| `arcDegrees` | [`number`](/docs/kcl-std/types/std-types-number) | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
+| `rotateDuplicates` | [`bool`](/docs/kcl-std/types/std-types-bool) | Whether or not to rotate the duplicates as they are copied. | Yes |
 | `useOriginal` | [`bool`](/docs/kcl-std/types/std-types-bool) | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns

docs/kcl-std/patternTransform2d.md

@@ -1,19 +1,19 @@
 ---
 title: "patternTransform2d"
 subtitle: "Function in std::sketch"
-excerpt: "Just like `patternTransform`, but works on 2D sketches not 3D solids."
+excerpt: "Just like patternTransform, but works on 2D sketches not 3D solids."
 layout: manual
 ---
 
-Just like `patternTransform`, but works on 2D sketches not 3D solids.
+Just like patternTransform, but works on 2D sketches not 3D solids.
 
 ```kcl
 patternTransform2d(
-  @sketches: [Sketch; 1+],
-  instances: number(_),
-  transform: fn(number(_)): { },
-  useOriginal?: boolean,
-): [Sketch; 1+]
+  @sketches: [Sketch],
+  instances: number,
+  transform: FunctionSource,
+  useOriginal?: bool,
+): [Sketch]
 ```
 
 
@@ -22,14 +22,14 @@ patternTransform2d(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketches` | [`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch) | The sketch(es) to duplicate. | Yes |
-| `instances` | [`number(_)`](/docs/kcl-std/types/std-types-number) | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
-| `transform` | [`fn(number(_)): { }`](/docs/kcl-std/types/std-types-fn) | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
-| `useOriginal` | `boolean` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. | No |
+| `sketches` | [`[Sketch]`](/docs/kcl-std/types/std-types-Sketch) | The sketch(es) to duplicate | Yes |
+| `instances` | [`number`](/docs/kcl-std/types/std-types-number) | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
+| `transform` | `FunctionSource` | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
+| `useOriginal` | [`bool`](/docs/kcl-std/types/std-types-bool) | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 
-[`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch)
+[`[Sketch]`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

e2e/playwright/code-pane-and-errors.spec.ts

@@ -235,48 +235,6 @@ extrude001 = extrude(sketch001, length = 5)`
         .first()
     ).toBeVisible()
   })
-
-  test('KCL errors with functions show hints for the entire backtrace', async ({
-    page,
-    homePage,
-    scene,
-    cmdBar,
-    editor,
-    toolbar,
-  }) => {
-    await homePage.goToModelingScene()
-    await scene.settled(cmdBar)
-
-    const code = `fn check(@x) {
-  return assert(x, isGreaterThan = 0)
-}
-
-fn middle(@x) {
-  return check(x)
-}
-
-middle(1)
-middle(0)
-`
-    await test.step('Set the code with a KCL error', async () => {
-      await toolbar.openPane('code')
-      await editor.replaceCode('', code)
-    })
-    // This shows all the diagnostics in a way that doesn't require the mouse
-    // pointer hovering over a coordinate, which would be brittle.
-    await test.step('Open CodeMirror diagnostics list', async () => {
-      // Ensure keyboard focus is in the editor.
-      await page.getByText('fn check(').click()
-      await page.keyboard.press('ControlOrMeta+Shift+M')
-    })
-    await expect(
-      page.getByText(`assert failed: Expected 0 to be greater than 0 but it wasn't
-check()
-middle()`)
-    ).toBeVisible()
-    // There should be one hint inside middle() and one at the top level.
-    await expect(page.getByText('Part of the error backtrace')).toHaveCount(2)
-  })
 })
 
 test(

e2e/playwright/command-bar-tests.spec.ts

@@ -36,29 +36,27 @@ test.describe('Command bar tests', () => {
     await u.closeDebugPanel()
 
     // Click the line of code for xLine.
-    await page.getByText(`startProfile(at = [-10, -10])`).click()
-
-    // Wait for the selection to register (TODO: we need a definitive way to wait for this)
-    await page.waitForTimeout(200)
+    await page.getByText(`close()`).click() // TODO remove this and reinstate // await topHorzSegmentClick()
 
     await toolbar.extrudeButton.click()
     await cmdBar.expectState({
       stage: 'arguments',
       commandName: 'Extrude',
-      currentArgKey: 'length',
-      currentArgValue: '5',
+      currentArgKey: 'sketches',
+      currentArgValue: '',
       headerArguments: {
-        Profiles: '1 profile',
+        Sketches: '',
         Length: '',
       },
-      highlightedHeaderArg: 'length',
+      highlightedHeaderArg: 'sketches',
     })
     await cmdBar.progressCmdBar()
+    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'review',
       commandName: 'Extrude',
       headerArguments: {
-        Profiles: '1 profile',
+        Sketches: '1 segment',
         Length: '5',
       },
     })
@@ -288,7 +286,7 @@ test.describe('Command bar tests', () => {
     await cmdBar.cmdOptions.getByText('Extrude').click()
 
     // Assert that we're on the selection step
-    await expect(page.getByRole('button', { name: 'Profiles' })).toBeDisabled()
+    await expect(page.getByRole('button', { name: 'sketches' })).toBeDisabled()
     // Select a face
     await page.mouse.move(700, 200)
     await page.mouse.click(700, 200)
@@ -401,6 +399,7 @@ test.describe('Command bar tests', () => {
         sortBy: 'last-modified-desc',
       })
       await page.goto(page.url() + targetURL)
+      expect(page.url()).toContain(targetURL)
     })
 
     await test.step(`Submit the command`, async () => {
@@ -411,7 +410,7 @@ test.describe('Command bar tests', () => {
         currentArgValue: '',
         headerArguments: {
           Method: '',
-          Name: 'main.kcl',
+          Name: 'test',
           Code: '1 line',
         },
         highlightedHeaderArg: 'method',
@@ -422,7 +421,7 @@ test.describe('Command bar tests', () => {
         commandName: 'Import file from URL',
         headerArguments: {
           Method: 'New project',
-          Name: 'main.kcl',
+          Name: 'test',
           Code: '1 line',
         },
       })
@@ -464,6 +463,7 @@ test.describe('Command bar tests', () => {
         sortBy: 'last-modified-desc',
       })
       await page.goto(page.url() + targetURL)
+      expect(page.url()).toContain(targetURL)
     })
 
     await test.step(`Submit the command`, async () => {
@@ -474,7 +474,7 @@ test.describe('Command bar tests', () => {
         currentArgValue: '',
         headerArguments: {
           Method: '',
-          Name: 'main.kcl',
+          Name: 'test',
           Code: '1 line',
         },
         highlightedHeaderArg: 'method',
@@ -487,7 +487,7 @@ test.describe('Command bar tests', () => {
         currentArgValue: '',
         headerArguments: {
           Method: 'Existing project',
-          Name: 'main.kcl',
+          Name: 'test',
           ProjectName: '',
           Code: '1 line',
         },
@@ -500,7 +500,7 @@ test.describe('Command bar tests', () => {
         headerArguments: {
           Method: 'Existing project',
           ProjectName: 'testProjectDir',
-          Name: 'main.kcl',
+          Name: 'test',
           Code: '1 line',
         },
       })
@@ -510,7 +510,7 @@ test.describe('Command bar tests', () => {
     await test.step(`Ensure we created the project and are in the modeling scene`, async () => {
       await editor.expectEditor.toContain('extrusionDistance = 12')
       await toolbar.openPane('files')
-      await toolbar.expectFileTreeState(['main-1.kcl', 'main.kcl'])
+      await toolbar.expectFileTreeState(['main.kcl', 'test.kcl'])
     })
   })
 
@@ -661,27 +661,4 @@ c = 3 + a`
       `a = 5b = a * amyParameter001 = ${newValue}c = 3 + a`
     )
   })
-
-  test('Command palette can be opened via query parameter', async ({
-    page,
-    homePage,
-    cmdBar,
-  }) => {
-    await page.goto(`${page.url()}/?cmd=app.theme&groupId=settings`)
-    await homePage.expectState({
-      projectCards: [],
-      sortBy: 'last-modified-desc',
-    })
-    await cmdBar.expectState({
-      stage: 'arguments',
-      commandName: 'Settings · app · theme',
-      currentArgKey: 'value',
-      currentArgValue: '',
-      headerArguments: {
-        Level: 'user',
-        Value: '',
-      },
-      highlightedHeaderArg: 'value',
-    })
-  })
 })

e2e/playwright/editor-tests.spec.ts

@@ -1131,15 +1131,14 @@ sketch001 = startSketchOn(XZ)
     await page.waitForTimeout(100)
 
     await page.getByText('startProfile(at = [4.61, -14.01])').click()
-    // Wait for the selection to register (TODO: we need a definitive way to wait for this)
-    await page.waitForTimeout(200)
     await toolbar.extrudeButton.click()
+    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'arguments',
       currentArgKey: 'length',
       currentArgValue: '5',
       headerArguments: {
-        Profiles: '1 profile',
+        Sketches: '1 face',
         Length: '',
       },
       highlightedHeaderArg: 'length',
@@ -1149,7 +1148,7 @@ sketch001 = startSketchOn(XZ)
     await cmdBar.expectState({
       stage: 'review',
       headerArguments: {
-        Profiles: '1 profile',
+        Sketches: '1 face',
         Length: '5',
       },
       commandName: 'Extrude',
@@ -1355,9 +1354,7 @@ sketch001 = startSketchOn(XZ)
       const u = await getUtils(page)
       const projectLink = page.getByRole('link', { name: 'cube' })
       const gizmo = page.locator('[aria-label*=gizmo]')
-      const resetCameraButton = page.getByRole('button', {
-        name: 'Reset view',
-      })
+      const resetCameraButton = page.getByRole('button', { name: 'Reset view' })
       const locationToHaveColor = async (
         position: { x: number; y: number },
         color: [number, number, number]

e2e/playwright/file-tree.spec.ts

@@ -267,75 +267,6 @@ test.describe('when using the file tree to', () => {
       })
     }
   )
-
-  test(
-    'loading small file, then large, then back to small',
-    {
-      tag: '@electron',
-    },
-    async ({ page }, testInfo) => {
-      const {
-        panesOpen,
-        pasteCodeInEditor,
-        createNewFile,
-        openDebugPanel,
-        closeDebugPanel,
-        expectCmdLog,
-      } = await getUtils(page, test)
-
-      await page.setViewportSize({ width: 1200, height: 500 })
-      page.on('console', console.log)
-
-      await panesOpen(['files', 'code'])
-      await createProject({ name: 'project-000', page })
-
-      // Create a small file
-      const kclCube = await fsp.readFile(
-        'rust/kcl-lib/e2e/executor/inputs/cube.kcl',
-        'utf-8'
-      )
-      // pasted into main.kcl
-      await pasteCodeInEditor(kclCube)
-
-      // Create a large lego file
-      await createNewFile('lego')
-      const legoFile = page.getByRole('listitem').filter({
-        has: page.getByRole('button', { name: 'lego.kcl' }),
-      })
-      await expect(legoFile).toBeVisible({ timeout: 60_000 })
-      await legoFile.click()
-      const kclLego = await fsp.readFile(
-        'rust/kcl-lib/e2e/executor/inputs/lego.kcl',
-        'utf-8'
-      )
-      await pasteCodeInEditor(kclLego)
-      const mainFile = page.getByRole('listitem').filter({
-        has: page.getByRole('button', { name: 'main.kcl' }),
-      })
-
-      // Open settings and enable the debug panel
-      await page
-        .getByRole('link', {
-          name: 'settings Settings',
-        })
-        .click()
-      await page.locator('#showDebugPanel').getByText('OffOn').click()
-      await page.getByTestId('settings-close-button').click()
-
-      await test.step('swap between small and large files', async () => {
-        await openDebugPanel()
-        // Previously created a file so we need to start back at main.kcl
-        await mainFile.click()
-        await expectCmdLog('[data-message-type="execution-done"]', 60_000)
-        // Click the large file
-        await legoFile.click()
-        // Once it is building, click back to the smaller file
-        await mainFile.click()
-        await expectCmdLog('[data-message-type="execution-done"]', 60_000)
-        await closeDebugPanel()
-      })
-    }
-  )
 })
 
 test.describe('Renaming in the file tree', () => {

e2e/playwright/fixtures/cmdBarFixture.ts

@@ -146,7 +146,9 @@ export class CmdBarFixture {
     await this.cmdBarOpenBtn.click()
     await expect(this.page.getByPlaceholder('Search commands')).toBeVisible()
     if (selectCmd === 'promptToEdit') {
-      const promptEditCommand = this.selectOption({ name: 'Text-to-CAD Edit' })
+      const promptEditCommand = this.page.getByText(
+        'Use Zoo AI to edit your parts and code.'
+      )
       await expect(promptEditCommand.first()).toBeVisible()
       await promptEditCommand.first().scrollIntoViewIfNeeded()
       await promptEditCommand.first().click()

e2e/playwright/fixtures/homePageFixture.ts

@@ -121,13 +121,11 @@ export class HomePageFixture {
     await projectCard.click()
   }
 
-  /** Returns the project name in case caller has used the default and needs it */
-  goToModelingScene = async (name = 'testDefault') => {
+  goToModelingScene = async (name: string = 'testDefault') => {
     // On web this is a no-op. There is no project view.
-    if (process.env.PLATFORM === 'web') return ''
+    if (process.env.PLATFORM === 'web') return
 
     await this.createAndGoToProject(name)
-    return name
   }
 
   isNativeFileMenuCreated = async () => {

e2e/playwright/native-file-menu.spec.ts

@@ -197,6 +197,18 @@ test.describe(
         await clickElectronNativeMenuById(tronApp, 'File.Export current part')
         await cmdBar.expectCommandName('Export')
       })
+      await test.step('Modeling.File.Share part via Zoo link', async () => {
+        await page.waitForTimeout(250)
+        await clickElectronNativeMenuById(
+          tronApp,
+          'File.Share part via Zoo link'
+        )
+        const textToCheck =
+          'Link copied to clipboard. Anyone who clicks this link will get a copy of this file. Share carefully!'
+        // Check if text appears anywhere in the page
+        const isTextVisible = page.getByText(textToCheck)
+        await expect(isTextVisible).toBeVisible({ timeout: 10000 })
+      })
       await test.step('Modeling.File.Preferences.Project settings', async () => {
         await page.waitForTimeout(250)
         await clickElectronNativeMenuById(
@@ -252,7 +264,7 @@ test.describe(
           tronApp,
           'Edit.Modify with Zoo Text-To-CAD'
         )
-        await cmdBar.expectCommandName('Text-to-CAD Edit')
+        await cmdBar.expectCommandName('Prompt-to-edit')
       })
       await test.step('Modeling.Edit.Edit parameter', async () => {
         await page.waitForTimeout(250)
@@ -518,7 +530,7 @@ test.describe(
           'Design.Create with Zoo Text-To-CAD'
         )
         await cmdBar.toBeOpened()
-        await cmdBar.expectCommandName('Text-to-CAD Create')
+        await cmdBar.expectCommandName('Text to CAD')
       })
 
       await test.step('Modeling.Design.Modify with Zoo Text-To-CAD', async () => {
@@ -528,7 +540,7 @@ test.describe(
           'Design.Modify with Zoo Text-To-CAD'
         )
         await cmdBar.toBeOpened()
-        await cmdBar.expectCommandName('Text-to-CAD Edit')
+        await cmdBar.expectCommandName('Prompt-to-edit')
       })
 
       await test.step('Modeling.Help.KCL code samples', async () => {

e2e/playwright/onboarding-tests.spec.ts

@@ -6,6 +6,7 @@ test.describe('Onboarding tests', () => {
     homePage,
     toolbar,
     editor,
+    scene,
     tronApp,
   }) => {
     if (!tronApp) {
@@ -61,6 +62,7 @@ test.describe('Onboarding tests', () => {
       await editor.expectEditor.toContain('@settings(defaultLengthUnit = in)', {
         shouldNormalise: true,
       })
+      await scene.connectionEstablished()
     })
 
     await test.step('Go home and verify we still see the tutorial button, then begin it.', async () => {
@@ -130,7 +132,9 @@ test.describe('Onboarding tests', () => {
       })
 
       await test.step('Dismiss the onboarding', async () => {
+        await postDismissToast.waitFor({ state: 'hidden' })
         await page.keyboard.press('Escape')
+        await expect(postDismissToast).toBeVisible()
         await expect(page.getByTestId('onboarding-content')).not.toBeVisible()
         await expect.poll(() => page.url()).not.toContain('/onboarding')
       })
@@ -158,10 +162,13 @@ test.describe('Onboarding tests', () => {
       await test.step('Gets to the onboarding start', async () => {
         await expect(toolbar.projectName).toContainText('tutorial-project')
         await expect(tutorialWelcomeHeading).toBeVisible()
+        await scene.connectionEstablished()
       })
 
       await test.step('Dismiss the onboarding', async () => {
+        await postDismissToast.waitFor({ state: 'hidden' })
         await page.keyboard.press('Escape')
+        await expect(postDismissToast).toBeVisible()
         await expect(page.getByTestId('onboarding-content')).not.toBeVisible()
         await expect.poll(() => page.url()).not.toContain('/onboarding')
       })

e2e/playwright/point-click.spec.ts

@@ -74,11 +74,20 @@ test.describe('Point-and-click tests', () => {
 
     await test.step('do extrude flow and check extrude code is added to editor', async () => {
       await toolbar.extrudeButton.click()
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'sketches',
+        currentArgValue: '',
+        headerArguments: { Sketches: '', Length: '' },
+        highlightedHeaderArg: 'sketches',
+        commandName: 'Extrude',
+      })
+      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'length',
         currentArgValue: '5',
-        headerArguments: { Profiles: '1 profile', Length: '' },
+        headerArguments: { Sketches: '1 face', Length: '' },
         highlightedHeaderArg: 'length',
         commandName: 'Extrude',
       })
@@ -89,7 +98,7 @@ test.describe('Point-and-click tests', () => {
 
       await cmdBar.expectState({
         stage: 'review',
-        headerArguments: { Profiles: '1 profile', Length: '5' },
+        headerArguments: { Sketches: '1 face', Length: '5' },
         commandName: 'Extrude',
       })
       await cmdBar.progressCmdBar()
@@ -1625,15 +1634,15 @@ sketch002 = startSketchOn(plane001)
             stage: 'arguments',
             currentArgKey: 'sketches',
             currentArgValue: '',
-            headerArguments: { Profiles: '' },
-            highlightedHeaderArg: 'Profiles',
+            headerArguments: { Sketches: '' },
+            highlightedHeaderArg: 'sketches',
             commandName: 'Loft',
           })
           await selectSketches()
           await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
-            headerArguments: { Profiles: '2 profiles' },
+            headerArguments: { Sketches: '2 faces' },
             commandName: 'Loft',
           })
           await cmdBar.submit()
@@ -1645,9 +1654,18 @@ sketch002 = startSketchOn(plane001)
 
         await test.step(`Go through the command bar flow with preselected sketches`, async () => {
           await toolbar.loftButton.click()
+          await cmdBar.expectState({
+            stage: 'arguments',
+            currentArgKey: 'sketches',
+            currentArgValue: '',
+            headerArguments: { Sketches: '' },
+            highlightedHeaderArg: 'sketches',
+            commandName: 'Loft',
+          })
+          await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
-            headerArguments: { Profiles: '2 profiles' },
+            headerArguments: { Sketches: '2 faces' },
             commandName: 'Loft',
           })
           await cmdBar.submit()
@@ -1812,10 +1830,10 @@ sketch002 = startSketchOn(XZ)
           currentArgValue: '',
           headerArguments: {
             Sectional: '',
-            Profiles: '',
+            Sketches: '',
             Path: '',
           },
-          highlightedHeaderArg: 'Profiles',
+          highlightedHeaderArg: 'sketches',
           stage: 'arguments',
         })
         await clickOnSketch1()
@@ -1826,7 +1844,7 @@ sketch002 = startSketchOn(XZ)
           currentArgValue: '',
           headerArguments: {
             Sectional: '',
-            Profiles: '1 profile',
+            Sketches: '1 face',
             Path: '',
           },
           highlightedHeaderArg: 'path',
@@ -1839,7 +1857,7 @@ sketch002 = startSketchOn(XZ)
           currentArgValue: '',
           headerArguments: {
             Sectional: '',
-            Profiles: '1 profile',
+            Sketches: '1 face',
             Path: '',
           },
           highlightedHeaderArg: 'path',
@@ -1849,7 +1867,7 @@ sketch002 = startSketchOn(XZ)
         await cmdBar.expectState({
           commandName: 'Sweep',
           headerArguments: {
-            Profiles: '1 profile',
+            Sketches: '1 face',
             Path: '1 segment',
             Sectional: '',
           },
@@ -1950,10 +1968,10 @@ profile001 = ${circleCode}`
         currentArgValue: '',
         headerArguments: {
           Sectional: '',
-          Profiles: '',
+          Sketches: '',
           Path: '',
         },
-        highlightedHeaderArg: 'Profiles',
+        highlightedHeaderArg: 'sketches',
         stage: 'arguments',
       })
       await editor.scrollToText(circleCode)
@@ -1965,7 +1983,7 @@ profile001 = ${circleCode}`
         currentArgValue: '',
         headerArguments: {
           Sectional: '',
-          Profiles: '1 profile',
+          Sketches: '1 face',
           Path: '',
         },
         highlightedHeaderArg: 'path',
@@ -1979,7 +1997,7 @@ profile001 = ${circleCode}`
         currentArgValue: '',
         headerArguments: {
           Sectional: '',
-          Profiles: '1 profile',
+          Sketches: '1 face',
           Path: '',
         },
         highlightedHeaderArg: 'path',
@@ -1989,7 +2007,7 @@ profile001 = ${circleCode}`
       await cmdBar.expectState({
         commandName: 'Sweep',
         headerArguments: {
-          Profiles: '1 profile',
+          Sketches: '1 face',
           Path: '1 helix',
           Sectional: '',
         },
@@ -2088,6 +2106,18 @@ extrude001 = extrude(sketch001, length = -12)
     await test.step(`Apply fillet to the preselected edge`, async () => {
       await page.waitForTimeout(100)
       await toolbar.filletButton.click()
+      await cmdBar.expectState({
+        commandName: 'Fillet',
+        highlightedHeaderArg: 'selection',
+        currentArgKey: 'selection',
+        currentArgValue: '',
+        headerArguments: {
+          Selection: '',
+          Radius: '',
+        },
+        stage: 'arguments',
+      })
+      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         commandName: 'Fillet',
         highlightedHeaderArg: 'radius',
@@ -2617,6 +2647,18 @@ extrude001 = extrude(profile001, length = 5)
       await test.step(`Apply fillet`, async () => {
         await page.waitForTimeout(100)
         await toolbar.filletButton.click()
+        await cmdBar.expectState({
+          commandName: 'Fillet',
+          highlightedHeaderArg: 'selection',
+          currentArgKey: 'selection',
+          currentArgValue: '',
+          headerArguments: {
+            Selection: '',
+            Radius: '',
+          },
+          stage: 'arguments',
+        })
+        await cmdBar.progressCmdBar()
         await cmdBar.expectState({
           commandName: 'Fillet',
           highlightedHeaderArg: 'radius',
@@ -2722,6 +2764,19 @@ extrude001 = extrude(sketch001, length = -12)
     await test.step(`Apply chamfer to the preselected edge`, async () => {
       await page.waitForTimeout(100)
       await toolbar.chamferButton.click()
+      await cmdBar.expectState({
+        commandName: 'Chamfer',
+        highlightedHeaderArg: 'selection',
+        currentArgKey: 'selection',
+        currentArgValue: '',
+        headerArguments: {
+          Selection: '',
+          Length: '',
+        },
+        stage: 'arguments',
+      })
+      await cmdBar.progressCmdBar()
+      await page.waitForTimeout(1000)
       await cmdBar.expectState({
         commandName: 'Chamfer',
         highlightedHeaderArg: 'length',
@@ -3205,6 +3260,8 @@ extrude001 = extrude(sketch001, length = 30)
         await test.step(`Go through the command bar flow with a preselected face (cap)`, async () => {
           await toolbar.shellButton.click()
           await cmdBar.progressCmdBar()
+          await page.waitForTimeout(500)
+          await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
             headerArguments: {
@@ -3634,17 +3691,16 @@ tag=$rectangleSegmentC002,
       await scene.settled(cmdBar)
 
       // select line of code
-      const codeToSelection = `startProfile(at = [-66.77, 84.81])`
+      const codeToSelection = `segAng(rectangleSegmentA002) - 90,`
       // revolve
       await editor.scrollToText(codeToSelection)
       await page.getByText(codeToSelection).click()
-      // Wait for the selection to register (TODO: we need a definitive way to wait for this)
-      await page.waitForTimeout(200)
       await toolbar.revolveButton.click()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
 
       const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = X)`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
@@ -4573,12 +4629,24 @@ path001 = startProfile(sketch001, at = [0, 0])
 
     await test.step('Go through command bar flow', async () => {
       await toolbar.extrudeButton.click()
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'sketches',
+        currentArgValue: '',
+        headerArguments: {
+          Sketches: '',
+          Length: '',
+        },
+        highlightedHeaderArg: 'sketches',
+        commandName: 'Extrude',
+      })
+      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'length',
         currentArgValue: '5',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           Length: '',
         },
         highlightedHeaderArg: 'length',
@@ -4589,7 +4657,7 @@ path001 = startProfile(sketch001, at = [0, 0])
       await cmdBar.expectState({
         stage: 'review',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           Length: '1',
         },
         commandName: 'Extrude',
@@ -4655,12 +4723,25 @@ path001 = startProfile(sketch001, at = [0, 0])
 
     await test.step('Go through command bar flow', async () => {
       await toolbar.sweepButton.click()
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'sketches',
+        currentArgValue: '',
+        headerArguments: {
+          Sketches: '',
+          Path: '',
+          Sectional: '',
+        },
+        highlightedHeaderArg: 'sketches',
+        commandName: 'Sweep',
+      })
+      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'path',
         currentArgValue: '',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           Path: '',
           Sectional: '',
         },
@@ -4673,7 +4754,7 @@ path001 = startProfile(sketch001, at = [0, 0])
       await cmdBar.expectState({
         stage: 'review',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           Path: '1 segment',
           Sectional: '',
         },
@@ -4739,12 +4820,25 @@ path001 = startProfile(sketch001, at = [0, 0])
     await test.step('Go through command bar flow', async () => {
       await toolbar.closePane('code')
       await toolbar.revolveButton.click()
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'sketches',
+        currentArgValue: '',
+        headerArguments: {
+          Sketches: '',
+          AxisOrEdge: '',
+          Angle: '',
+        },
+        highlightedHeaderArg: 'sketches',
+        commandName: 'Revolve',
+      })
+      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'axisOrEdge',
         currentArgValue: '',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           AxisOrEdge: '',
           Angle: '',
         },
@@ -4760,7 +4854,7 @@ path001 = startProfile(sketch001, at = [0, 0])
         currentArgKey: 'angle',
         currentArgValue: '360',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           AxisOrEdge: 'Edge',
           Edge: '1 segment',
           Angle: '',
@@ -4773,7 +4867,7 @@ path001 = startProfile(sketch001, at = [0, 0])
       await cmdBar.expectState({
         stage: 'review',
         headerArguments: {
-          Profiles: '2 profiles',
+          Sketches: '2 faces',
           AxisOrEdge: 'Edge',
           Edge: '1 segment',
           Angle: '180',

e2e/playwright/prompt-to-edit-snapshot-tests.spec.ts

@@ -99,8 +99,6 @@ test.describe('edit with AI example snapshots', () => {
       await test.step('fire off edit prompt', async () => {
         await cmdBar.captureTextToCadRequestSnapshot(test.info())
         await cmdBar.openCmdBar('promptToEdit')
-        await page.waitForTimeout(100)
-        await cmdBar.progressCmdBar()
         // being specific about the color with a hex means asserting pixel color is more stable
         await page
           .getByTestId('cmd-bar-arg-value')

e2e/playwright/prompt-to-edit.spec.ts

@@ -88,8 +88,6 @@ test.describe('Prompt-to-edit tests', () => {
 
         await test.step('fire off edit prompt', async () => {
           await cmdBar.openCmdBar('promptToEdit')
-          await page.waitForTimeout(100)
-          await cmdBar.progressCmdBar()
           // being specific about the color with a hex means asserting pixel color is more stable
           await page
             .getByTestId('cmd-bar-arg-value')
@@ -167,8 +165,6 @@ test.describe('Prompt-to-edit tests', () => {
 
     await test.step('fire of bad prompt', async () => {
       await cmdBar.openCmdBar('promptToEdit')
-      await page.waitForTimeout(100)
-      await cmdBar.progressCmdBar()
       await page
         .getByTestId('cmd-bar-arg-value')
         .fill('ansheusha asnthuatshoeuhtaoetuhthaeu laughs in dvorak')

e2e/playwright/sketch-tests.spec.ts

@@ -995,8 +995,8 @@ profile001 = startProfile(sketch001, at = [${roundOff(scale * 69.6)}, ${roundOff
     await u.expectCmdLog('[data-message-type="execution-done"]')
     await u.closeDebugPanel()
 
-    // click profile in code
-    await page.getByText(`startProfile(at = [-0.45, 0.87])`).click()
+    // click "line(end = [1.32, 0.38])"
+    await page.getByText(`line(end = [1.32, 0.38])`).click()
     await page.waitForTimeout(100)
     await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeEnabled(
       { timeout: 10_000 }
@@ -1014,13 +1014,14 @@ profile001 = startProfile(sketch001, at = [${roundOff(scale * 69.6)}, ${roundOff
     // click extrude
     await toolbar.extrudeButton.click()
 
-    // sketch selection should already have been made.
+    // sketch selection should already have been made. "Sketches: 1 face" only show up when the selection has been made already
     // otherwise the cmdbar would be waiting for a selection.
+    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'arguments',
       currentArgKey: 'length',
       currentArgValue: '5',
-      headerArguments: { Profiles: '1 profile', Length: '' },
+      headerArguments: { Sketches: '1 segment', Length: '' },
       highlightedHeaderArg: 'length',
       commandName: 'Extrude',
     })

e2e/playwright/test-utils.ts

@@ -551,6 +551,11 @@ export async function getUtils(page: Page, test_?: typeof test) {
 
     createNewFile: async (name: string) => {
       return test?.step(`Create a file named ${name}`, async () => {
+        // If the application is in the middle of connecting a stream
+        // then creating a new file won't work in the end.
+        await expect(
+          page.getByRole('button', { name: 'Start Sketch' })
+        ).not.toBeDisabled()
         await page.getByTestId('create-file-button').click()
         await page.getByTestId('tree-input-field').fill(name)
         await page.keyboard.press('Enter')

e2e/playwright/text-to-cad-tests.spec.ts

@@ -4,10 +4,9 @@ import type { Page } from '@playwright/test'
 
 import { createProject, getUtils } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
-import type { CmdBarFixture } from '@e2e/playwright/fixtures/cmdBarFixture'
 
 test.describe('Text-to-CAD tests', () => {
-  test('basic lego happy case', async ({ page, homePage, cmdBar }) => {
+  test('basic lego happy case', async ({ page, homePage }) => {
     const u = await getUtils(page)
 
     await test.step('Set up', async () => {
@@ -16,11 +15,7 @@ test.describe('Text-to-CAD tests', () => {
       await u.waitForPageLoad()
     })
 
-    await sendPromptFromCommandBarAndSetExistingProject(
-      page,
-      'a 2x4 lego',
-      cmdBar
-    )
+    await sendPromptFromCommandBarTriggeredByButton(page, 'a 2x4 lego')
 
     // Find the toast.
     // Look out for the toast message
@@ -61,7 +56,6 @@ test.describe('Text-to-CAD tests', () => {
   test('success model, then ignore success toast, user can create new prompt from command bar', async ({
     page,
     homePage,
-    cmdBar,
   }) => {
     const u = await getUtils(page)
 
@@ -70,11 +64,7 @@ test.describe('Text-to-CAD tests', () => {
     await homePage.goToModelingScene()
     await u.waitForPageLoad()
 
-    await sendPromptFromCommandBarAndSetExistingProject(
-      page,
-      'a 2x6 lego',
-      cmdBar
-    )
+    await sendPromptFromCommandBarTriggeredByButton(page, 'a 2x6 lego')
 
     // Find the toast.
     // Look out for the toast message
@@ -92,11 +82,7 @@ test.describe('Text-to-CAD tests', () => {
     await expect(successToastMessage).toBeVisible({ timeout: 15000 })
 
     // Can send a new prompt from the command bar.
-    await sendPromptFromCommandBarAndSetExistingProject(
-      page,
-      'a 2x4 lego',
-      cmdBar
-    )
+    await sendPromptFromCommandBarTriggeredByButton(page, 'a 2x4 lego')
 
     // Find the toast.
     // Look out for the toast message
@@ -114,7 +100,6 @@ test.describe('Text-to-CAD tests', () => {
   test('you can reject text-to-cad output and it does nothing', async ({
     page,
     homePage,
-    cmdBar,
   }) => {
     const u = await getUtils(page)
 
@@ -123,11 +108,7 @@ test.describe('Text-to-CAD tests', () => {
     await homePage.goToModelingScene()
     await u.waitForPageLoad()
 
-    await sendPromptFromCommandBarAndSetExistingProject(
-      page,
-      'a 2x4 lego',
-      cmdBar
-    )
+    await sendPromptFromCommandBarTriggeredByButton(page, 'a 2x4 lego')
 
     // Find the toast.
     // Look out for the toast message
@@ -160,7 +141,6 @@ test.describe('Text-to-CAD tests', () => {
   test('sending a bad prompt fails, can dismiss', async ({
     page,
     homePage,
-    cmdBar,
   }) => {
     const u = await getUtils(page)
 
@@ -170,11 +150,7 @@ test.describe('Text-to-CAD tests', () => {
     await u.waitForPageLoad()
 
     const randomPrompt = `aslkdfja;` + Date.now() + `FFFFEIWJF`
-    await sendPromptFromCommandBarAndSetExistingProject(
-      page,
-      randomPrompt,
-      cmdBar
-    )
+    await sendPromptFromCommandBarTriggeredByButton(page, randomPrompt)
 
     // Find the toast.
     // Look out for the toast message
@@ -212,7 +188,6 @@ test.describe('Text-to-CAD tests', () => {
   test('sending a bad prompt fails, can start over from toast', async ({
     page,
     homePage,
-    cmdBar,
   }) => {
     const u = await getUtils(page)
 
@@ -222,7 +197,7 @@ test.describe('Text-to-CAD tests', () => {
     await u.waitForPageLoad()
 
     const badPrompt = 'akjsndladf lajbhflauweyfaaaljhr472iouafyvsssssss'
-    await sendPromptFromCommandBarAndSetExistingProject(page, badPrompt, cmdBar)
+    await sendPromptFromCommandBarTriggeredByButton(page, badPrompt)
 
     // Find the toast.
     // Look out for the toast message
@@ -281,7 +256,6 @@ test.describe('Text-to-CAD tests', () => {
   test('sending a bad prompt fails, can ignore toast, can start over from command bar', async ({
     page,
     homePage,
-    cmdBar,
   }) => {
     const u = await getUtils(page)
 
@@ -291,7 +265,7 @@ test.describe('Text-to-CAD tests', () => {
     await u.waitForPageLoad()
 
     const badPrompt = 'akjsndladflajbhflauweyf15;'
-    await sendPromptFromCommandBarAndSetExistingProject(page, badPrompt, cmdBar)
+    await sendPromptFromCommandBarTriggeredByButton(page, badPrompt)
 
     // Find the toast.
     // Look out for the toast message
@@ -318,11 +292,7 @@ test.describe('Text-to-CAD tests', () => {
     await expect(page.getByText(`Text-to-CAD failed`)).toBeVisible()
 
     // They should be able to try again from the command bar.
-    await sendPromptFromCommandBarAndSetExistingProject(
-      page,
-      'a 2x4 lego',
-      cmdBar
-    )
+    await sendPromptFromCommandBarTriggeredByButton(page, 'a 2x4 lego')
 
     // Find the toast.
     // Look out for the toast message
@@ -340,40 +310,17 @@ test.describe('Text-to-CAD tests', () => {
   test('ensure you can shift+enter in the prompt box', async ({
     page,
     homePage,
-    cmdBar,
   }) => {
     const u = await getUtils(page)
 
     await page.setBodyDimensions({ width: 1000, height: 500 })
 
-    const projectName = await homePage.goToModelingScene()
+    await homePage.goToModelingScene()
     await u.waitForPageLoad()
 
     const promptWithNewline = `a 2x4\nlego`
 
-    await test.step('Get to the prompt step to test', async () => {
-      await cmdBar.openCmdBar()
-      await cmdBar.selectOption({ name: 'Text-to-CAD Create' }).click()
-
-      await cmdBar.currentArgumentInput.fill('existing')
-      await cmdBar.progressCmdBar()
-
-      await cmdBar.currentArgumentInput.fill(projectName)
-      await cmdBar.progressCmdBar()
-
-      await cmdBar.expectState({
-        commandName: 'Text-to-CAD Create',
-        stage: 'arguments',
-        currentArgKey: 'prompt',
-        currentArgValue: '',
-        highlightedHeaderArg: 'prompt',
-        headerArguments: {
-          Method: 'Existing project',
-          ProjectName: projectName,
-          Prompt: '',
-        },
-      })
-    })
+    await page.getByTestId('text-to-cad').click()
 
     // Type the prompt.
     await page.keyboard.type('a 2x4')
@@ -407,7 +354,6 @@ test.describe('Text-to-CAD tests', () => {
   test('can do many at once and get many prompts back, and interact with many', async ({
     page,
     homePage,
-    cmdBar,
   }) => {
     // Let this test run longer since we've seen it timeout.
     test.setTimeout(180_000)
@@ -419,23 +365,11 @@ test.describe('Text-to-CAD tests', () => {
     await homePage.goToModelingScene()
     await u.waitForPageLoad()
 
-    await sendPromptFromCommandBarAndSetExistingProject(
-      page,
-      'a 2x4 lego',
-      cmdBar
-    )
+    await sendPromptFromCommandBarTriggeredByButton(page, 'a 2x4 lego')
 
-    await sendPromptFromCommandBarAndSetExistingProject(
-      page,
-      'a 2x8 lego',
-      cmdBar
-    )
+    await sendPromptFromCommandBarTriggeredByButton(page, 'a 2x8 lego')
 
-    await sendPromptFromCommandBarAndSetExistingProject(
-      page,
-      'a 2x10 lego',
-      cmdBar
-    )
+    await sendPromptFromCommandBarTriggeredByButton(page, 'a 2x10 lego')
 
     // Find the toast.
     // Look out for the toast message
@@ -506,7 +440,6 @@ test.describe('Text-to-CAD tests', () => {
   test('can do many at once with errors, clicking dismiss error does not dismiss all', async ({
     page,
     homePage,
-    cmdBar,
   }) => {
     const u = await getUtils(page)
 
@@ -515,16 +448,11 @@ test.describe('Text-to-CAD tests', () => {
     await homePage.goToModelingScene()
     await u.waitForPageLoad()
 
-    await sendPromptFromCommandBarAndSetExistingProject(
-      page,
-      'a 2x4 lego',
-      cmdBar
-    )
+    await sendPromptFromCommandBarTriggeredByButton(page, 'a 2x4 lego')
 
-    await sendPromptFromCommandBarAndSetExistingProject(
+    await sendPromptFromCommandBarTriggeredByButton(
       page,
-      'alkjsdnlajshdbfjlhsbdf a;askjdnf',
-      cmdBar
+      'alkjsdnlajshdbfjlhsbdf a;askjdnf'
     )
 
     // Find the toast.
@@ -598,9 +526,7 @@ async function _sendPromptFromCommandBar(page: Page, promptStr: string) {
     const cmdSearchBar = page.getByPlaceholder('Search commands')
     await expect(cmdSearchBar).toBeVisible()
 
-    const textToCadCommand = page.getByRole('option', {
-      name: 'Text-to-CAD Create',
-    })
+    const textToCadCommand = page.getByText('Use the Zoo Text-to-CAD API')
     await expect(textToCadCommand.first()).toBeVisible()
     // Click the Text-to-CAD command
     await textToCadCommand.first().scrollIntoViewIfNeeded()
@@ -618,67 +544,29 @@ async function _sendPromptFromCommandBar(page: Page, promptStr: string) {
   })
 }
 
-async function sendPromptFromCommandBarAndSetExistingProject(
+async function sendPromptFromCommandBarTriggeredByButton(
   page: Page,
-  promptStr: string,
-  cmdBar: CmdBarFixture,
-  projectName = 'testDefault'
+  promptStr: string
 ) {
   await page.waitForTimeout(1000)
   await test.step(`Send prompt from command bar: ${promptStr}`, async () => {
-    await cmdBar.openCmdBar()
-    await cmdBar.selectOption({ name: 'Text-to-CAD Create' }).click()
+    await page.getByTestId('text-to-cad').click()
 
-    await cmdBar.expectState({
-      commandName: 'Text-to-CAD Create',
-      stage: 'arguments',
-      currentArgKey: 'method',
-      currentArgValue: '',
-      highlightedHeaderArg: 'method',
-      headerArguments: {
-        Method: '',
-        Prompt: '',
-      },
-    })
-    await cmdBar.currentArgumentInput.fill('existing')
-    await cmdBar.progressCmdBar()
+    // Enter the prompt.
+    const prompt = page.getByRole('textbox', { name: 'Prompt' })
+    await expect(prompt.first()).toBeVisible()
 
-    await cmdBar.expectState({
-      commandName: 'Text-to-CAD Create',
-      stage: 'arguments',
-      currentArgKey: 'projectName',
-      currentArgValue: '',
-      highlightedHeaderArg: 'projectName',
-      headerArguments: {
-        Method: 'Existing project',
-        ProjectName: '',
-        Prompt: '',
-      },
-    })
-    await cmdBar.currentArgumentInput.fill(projectName)
-    await cmdBar.progressCmdBar()
-
-    await cmdBar.expectState({
-      commandName: 'Text-to-CAD Create',
-      stage: 'arguments',
-      currentArgKey: 'prompt',
-      currentArgValue: '',
-      highlightedHeaderArg: 'prompt',
-      headerArguments: {
-        Method: 'Existing project',
-        ProjectName: projectName,
-        Prompt: '',
-      },
-    })
-    await cmdBar.currentArgumentInput.fill(promptStr)
-    await cmdBar.progressCmdBar()
+    // Type the prompt.
+    await page.keyboard.type(promptStr)
+    await page.waitForTimeout(200)
+    await page.keyboard.press('Enter')
   })
 }
 
 test(
   'Text-to-CAD functionality',
   { tag: '@electron' },
-  async ({ context, page, cmdBar }, testInfo) => {
+  async ({ context, page }, testInfo) => {
     const projectName = 'project-000'
     const prompt = 'lego 2x4'
     const textToCadFileName = 'lego-2x4.kcl'
@@ -715,12 +603,7 @@ test(
     await openKclCodePanel()
 
     await test.step(`Test file creation`, async () => {
-      await sendPromptFromCommandBarAndSetExistingProject(
-        page,
-        prompt,
-        cmdBar,
-        projectName
-      )
+      await sendPromptFromCommandBarTriggeredByButton(page, prompt)
       // File is considered created if it shows up in the Project Files pane
       await expect(textToCadFileButton).toBeVisible({ timeout: 20_000 })
       expect(fileExists()).toBeTruthy()
@@ -890,12 +773,12 @@ test.describe('Mocked Text-to-CAD API tests', { tag: ['@skipWin'] }, () => {
       )
       await expect(page.getByTestId('app-header-file-name')).toBeVisible()
       await expect(page.getByTestId('app-header-file-name')).toContainText(
-        'main.kcl'
+        '2x2x2-cube.kcl'
       )
 
       await u.openFilePanel()
       await expect(
-        page.getByTestId('file-tree-item').getByText('main.kcl')
+        page.getByTestId('file-tree-item').getByText('2x2x2-cube.kcl')
       ).toBeVisible()
     }
   )
@@ -1030,7 +913,7 @@ test.describe('Mocked Text-to-CAD API tests', { tag: ['@skipWin'] }, () => {
       )
       await expect(page.getByTestId('app-header-file-name')).toBeVisible()
       await expect(page.getByTestId('app-header-file-name')).toContainText(
-        'main.kcl'
+        '2x2x2-cube.kcl'
       )
 
       await page.getByRole('button', { name: 'Reject' }).click()
@@ -1078,7 +961,7 @@ test.describe('Mocked Text-to-CAD API tests', { tag: ['@skipWin'] }, () => {
       )
       await expect(page.getByTestId('app-header-file-name')).toBeVisible()
       await expect(page.getByTestId('app-header-file-name')).toContainText(
-        'main.kcl'
+        '2x2x2-cube.kcl'
       )
     }
   )
@@ -1330,14 +1213,18 @@ test.describe('Mocked Text-to-CAD API tests', { tag: ['@skipWin'] }, () => {
       )
       await expect(page.getByTestId('app-header-file-name')).toBeVisible()
       await expect(page.getByTestId('app-header-file-name')).toContainText(
-        'main.kcl'
+        '2x2x2-cube.kcl'
       )
 
       // Check file is created
       await u.openFilePanel()
       await expect(
-        page.getByTestId('file-tree-item').getByText('main.kcl')
+        page.getByTestId('file-tree-item').getByText('2x2x2-cube.kcl')
       ).toBeVisible()
+
+      await expect(
+        page.getByTestId('file-tree-item').getByText('main.kcl')
+      ).not.toBeVisible()
     }
   )
 

e2e/playwright/various.spec.ts

@@ -573,6 +573,7 @@ profile001 = startProfile(sketch002, at = [-12.34, 12.34])
   await expect(page.getByTestId('command-bar')).toBeVisible()
   await page.waitForTimeout(100)
 
+  await cmdBar.progressCmdBar()
   await cmdBar.progressCmdBar()
   await expect(page.getByText('Confirm Extrude')).toBeVisible()
   await cmdBar.progressCmdBar()

package.json

@@ -94,6 +94,7 @@
     "build:wasm:dev": "./scripts/build-wasm-dev.sh",
     "build:wasm:dev:windows": "powershell -ExecutionPolicy Bypass -File ./scripts/build-wasm-dev.ps1",
     "pretest": "npm run remove-importmeta",
+    "test:rust": "(cd rust && just test && just lint)",
     "simpleserver": "npm run pretest && http-server ./public --cors -p 3000",
     "simpleserver:ci": "npm run pretest && http-server ./public --cors -p 3000 &",
     "simpleserver:bg": "npm run pretest && http-server ./public --cors -p 3000 &",
@@ -129,14 +130,15 @@
     "tronb:package:prod": "npm run tronb:vite:prod && electron-builder --config electron-builder.yml --publish always",
     "test-setup": "npm install && npm run build:wasm",
     "test": "vitest --mode development",
-    "test:rust": "(cd rust && just test && just lint)",
     "test:snapshots": "PLATFORM=web NODE_ENV=development playwright test --config=playwright.config.ts --grep=@snapshot --trace=on --shard=1/1",
-    "test:unit": "vitest run --mode development --exclude **/jest-component-unit-tests/*",
+    "test:unit": "vitest run --mode development --exclude **/kclSamples.test.ts --exclude **/jest-component-unit-tests/*",
     "test:unit:components": "jest -c jest-component-unit-tests/jest.config.ts --rootDir jest-component-unit-tests/",
+    "test:unit:kcl-samples": "vitest run --mode development ./src/lang/kclSamples.test.ts",
     "test:playwright:electron": "playwright test --config=playwright.electron.config.ts --grep-invert=@snapshot",
     "test:playwright:electron:local": "npm run tronb:vite:dev && playwright test --config=playwright.electron.config.ts --grep-invert=@snapshot --grep-invert=\"$(curl --silent https://test-analysis-bot.hawk-dinosaur.ts.net/projects/KittyCAD/modeling-app/tests/disabled/regex)\"",
     "test:playwright:electron:local-engine": "npm run tronb:vite:dev && playwright test --config=playwright.electron.config.ts --grep-invert='@snapshot|@skipLocalEngine' --grep-invert=\"$(curl --silent https://test-analysis-bot.hawk-dinosaur.ts.net/projects/KittyCAD/modeling-app/tests/disabled/regex)\"",
-    "test:unit:local": "npm run simpleserver:bg && npm run test:unit; kill-port 3000"
+    "test:unit:local": "npm run simpleserver:bg && npm run test:unit; kill-port 3000",
+    "test:unit:kcl-samples:local": "npm run simpleserver:bg && npm run test:unit:kcl-samples; kill-port 3000"
   },
   "browserslist": {
     "production": [

public/kcl-samples/README.md

@@ -37,8 +37,6 @@ When you submit a PR to add or modify KCL samples, images will be generated and
 [![bottle](screenshots/bottle.png)](bottle/main.kcl)
 #### [bracket](bracket/main.kcl) ([screenshot](screenshots/bracket.png))
 [![bracket](screenshots/bracket.png)](bracket/main.kcl)
-#### [brake-rotor](brake-rotor/main.kcl) ([screenshot](screenshots/brake-rotor.png))
-[![brake-rotor](screenshots/brake-rotor.png)](brake-rotor/main.kcl)
 #### [car-wheel-assembly](car-wheel-assembly/main.kcl) ([screenshot](screenshots/car-wheel-assembly.png))
 [![car-wheel-assembly](screenshots/car-wheel-assembly.png)](car-wheel-assembly/main.kcl)
 #### [cold-plate](cold-plate/main.kcl) ([screenshot](screenshots/cold-plate.png))
@@ -51,16 +49,12 @@ When you submit a PR to add or modify KCL samples, images will be generated and
 [![countersunk-plate](screenshots/countersunk-plate.png)](countersunk-plate/main.kcl)
 #### [cpu-cooler](cpu-cooler/main.kcl) ([screenshot](screenshots/cpu-cooler.png))
 [![cpu-cooler](screenshots/cpu-cooler.png)](cpu-cooler/main.kcl)
-#### [curtain-wall-anchor-plate](curtain-wall-anchor-plate/main.kcl) ([screenshot](screenshots/curtain-wall-anchor-plate.png))
-[![curtain-wall-anchor-plate](screenshots/curtain-wall-anchor-plate.png)](curtain-wall-anchor-plate/main.kcl)
 #### [cycloidal-gear](cycloidal-gear/main.kcl) ([screenshot](screenshots/cycloidal-gear.png))
 [![cycloidal-gear](screenshots/cycloidal-gear.png)](cycloidal-gear/main.kcl)
 #### [dodecahedron](dodecahedron/main.kcl) ([screenshot](screenshots/dodecahedron.png))
 [![dodecahedron](screenshots/dodecahedron.png)](dodecahedron/main.kcl)
 #### [enclosure](enclosure/main.kcl) ([screenshot](screenshots/enclosure.png))
 [![enclosure](screenshots/enclosure.png)](enclosure/main.kcl)
-#### [engine-valve](engine-valve/main.kcl) ([screenshot](screenshots/engine-valve.png))
-[![engine-valve](screenshots/engine-valve.png)](engine-valve/main.kcl)
 #### [exhaust-manifold](exhaust-manifold/main.kcl) ([screenshot](screenshots/exhaust-manifold.png))
 [![exhaust-manifold](screenshots/exhaust-manifold.png)](exhaust-manifold/main.kcl)
 #### [flange](flange/main.kcl) ([screenshot](screenshots/flange.png))
@@ -109,8 +103,6 @@ When you submit a PR to add or modify KCL samples, images will be generated and
 [![mounting-plate](screenshots/mounting-plate.png)](mounting-plate/main.kcl)
 #### [multi-axis-robot](multi-axis-robot/main.kcl) ([screenshot](screenshots/multi-axis-robot.png))
 [![multi-axis-robot](screenshots/multi-axis-robot.png)](multi-axis-robot/main.kcl)
-#### [pdu-faceplate](pdu-faceplate/main.kcl) ([screenshot](screenshots/pdu-faceplate.png))
-[![pdu-faceplate](screenshots/pdu-faceplate.png)](pdu-faceplate/main.kcl)
 #### [pillow-block-bearing](pillow-block-bearing/main.kcl) ([screenshot](screenshots/pillow-block-bearing.png))
 [![pillow-block-bearing](screenshots/pillow-block-bearing.png)](pillow-block-bearing/main.kcl)
 #### [pipe](pipe/main.kcl) ([screenshot](screenshots/pipe.png))
@@ -127,24 +119,16 @@ When you submit a PR to add or modify KCL samples, images will be generated and
 [![router-template-cross-bar](screenshots/router-template-cross-bar.png)](router-template-cross-bar/main.kcl)
 #### [router-template-slate](router-template-slate/main.kcl) ([screenshot](screenshots/router-template-slate.png))
 [![router-template-slate](screenshots/router-template-slate.png)](router-template-slate/main.kcl)
-#### [sash-window](sash-window/main.kcl) ([screenshot](screenshots/sash-window.png))
-[![sash-window](screenshots/sash-window.png)](sash-window/main.kcl)
 #### [sheet-metal-bracket](sheet-metal-bracket/main.kcl) ([screenshot](screenshots/sheet-metal-bracket.png))
 [![sheet-metal-bracket](screenshots/sheet-metal-bracket.png)](sheet-metal-bracket/main.kcl)
-#### [shepherds-hook-bolt](shepherds-hook-bolt/main.kcl) ([screenshot](screenshots/shepherds-hook-bolt.png))
-[![shepherds-hook-bolt](screenshots/shepherds-hook-bolt.png)](shepherds-hook-bolt/main.kcl)
 #### [socket-head-cap-screw](socket-head-cap-screw/main.kcl) ([screenshot](screenshots/socket-head-cap-screw.png))
 [![socket-head-cap-screw](screenshots/socket-head-cap-screw.png)](socket-head-cap-screw/main.kcl)
-#### [spinning-highrise-tower](spinning-highrise-tower/main.kcl) ([screenshot](screenshots/spinning-highrise-tower.png))
-[![spinning-highrise-tower](screenshots/spinning-highrise-tower.png)](spinning-highrise-tower/main.kcl)
 #### [spur-gear](spur-gear/main.kcl) ([screenshot](screenshots/spur-gear.png))
 [![spur-gear](screenshots/spur-gear.png)](spur-gear/main.kcl)
 #### [spur-reduction-gearset](spur-reduction-gearset/main.kcl) ([screenshot](screenshots/spur-reduction-gearset.png))
 [![spur-reduction-gearset](screenshots/spur-reduction-gearset.png)](spur-reduction-gearset/main.kcl)
 #### [surgical-drill-guide](surgical-drill-guide/main.kcl) ([screenshot](screenshots/surgical-drill-guide.png))
 [![surgical-drill-guide](screenshots/surgical-drill-guide.png)](surgical-drill-guide/main.kcl)
-#### [thermal-block-insert](thermal-block-insert/main.kcl) ([screenshot](screenshots/thermal-block-insert.png))
-[![thermal-block-insert](screenshots/thermal-block-insert.png)](thermal-block-insert/main.kcl)
 #### [tooling-nest-block](tooling-nest-block/main.kcl) ([screenshot](screenshots/tooling-nest-block.png))
 [![tooling-nest-block](screenshots/tooling-nest-block.png)](tooling-nest-block/main.kcl)
 #### [utility-sink](utility-sink/main.kcl) ([screenshot](screenshots/utility-sink.png))

public/kcl-samples/brake-rotor/main.kcl

@@ -1,179 +0,0 @@
-// A 320mm vented brake disc (rotor), with straight vanes, 30mm thick. The disc bell should accommodate 5 M12 wheel studs on a 114.3mm pitch circle diameter.
-
-
-
-
-@settings(defaultLengthUnit = mm)
-
-// Define parameters.
-dDisc = 320
-dPitchCircle = 114.3
-dBore = 64
-nStuds = 5
-dStudDrilling = 12.5 // M12
-hFrictionSurface = 60
-tDiscHalf = 10
-
-// Vent parameters.
-tVent = 10
-wVent = 6
-rVentFillet = 2
-nVentBosses = 36
-
-// Drilling parameters.
-dDrillDia = 6
-aBase = 90
-aSweep = 30
-nArcs = 12
-
-// Bell parameters.
-aDraftBell = 5
-tBell = 5 // Wall thickness.
-hBellAboveDiscFace = 40
-hBellSubflush = 4
-wUndercut = 8
-
-fn drillHole(activeSketch, t) {
-  // Sketch a vent hole at line parameter value t on an arc drawn across the disc surface.
-  rInner = dDisc / 2 - hFrictionSurface
-  rOuter = dDisc / 2
-
-  aStart = aBase
-  aEnd = aBase - aSweep
-
-  // Linear interpolation of radius.
-  rCurrent = rInner + t * (rOuter - rInner)
-
-  // Linear interpolation of angle.
-  aCurrent = aStart + t * (aEnd - aStart)
-
-  // Calculate position.
-  xCenter = rCurrent * cos(aCurrent)
-  yCenter = rCurrent * sin(aCurrent)
-
-  // Draw.
-  drillCircle = circle(activeSketch, center = [xCenter, yCenter], radius = dDrillDia / 2)
-  return drillCircle
-}
-
-fn createDiscHalf(plane, dDiscParam, hFrictionSurfaceParam, tDiscHalfParam) {
-  // Create a disc half with a vent hole pattern.
-  sketchFace = startSketchOn(plane)
-  profileFace = circle(sketchFace, center = [0, 0], radius = dDiscParam / 2)
-    |> subtract2d(tool = circle(sketchFace, center = [0, 0], radius = dDiscParam / 2 - hFrictionSurfaceParam))
-
-  // Create three circles at t = 0, 0.5, and 1
-  hole1 = drillHole(activeSketch = sketchFace, t = 0.2)
-  hole2 = drillHole(activeSketch = sketchFace, t = 0.5)
-  hole3 = drillHole(activeSketch = sketchFace, t = 0.8)
-
-  // Pattern and cut.
-  holes = patternCircular2d(
-    [hole1, hole2, hole3],
-    instances = nArcs,
-    center = [0, 0],
-    arcDegrees = 360,
-    rotateDuplicates = true,
-  )
-  profileDrilled = subtract2d(profileFace, tool = holes)
-
-  // Extrude.
-  discHalf = extrude(profileFace, length = tDiscHalfParam)
-  return discHalf
-}
-
-// ---------------------------------------------------------------------------------------------------------------------
-
-// Create inboard half.
-discInboard = createDiscHalf(
-  plane = XY,
-  dDiscParam = dDisc,
-  hFrictionSurfaceParam = hFrictionSurface,
-  tDiscHalfParam = tDiscHalf,
-)
-
-// Create vents.
-planeVent = offsetPlane(XY, offset = tDiscHalf)
-sketchVent = startSketchOn(planeVent)
-profileVent = startProfile(sketchVent, at = [-wVent, dDisc / 2])
-  |> angledLine(angle = 0, length = wVent, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = hFrictionSurface, tag = $seg02)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $seg03)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg01)
-  |> close()
-
-ventPad = extrude(profileVent, length = tVent)
-  |> fillet(
-       radius = rVentFillet,
-       tags = [
-         getCommonEdge(faces = [seg01, rectangleSegmentA001]),
-         getCommonEdge(faces = [seg02, rectangleSegmentA001]),
-         getCommonEdge(faces = [seg01, seg03]),
-         getCommonEdge(faces = [seg03, seg02])
-       ],
-     )
-ventSet = patternCircular3d(
-  ventPad,
-  instances = nVentBosses,
-  axis = [0, 0, 1],
-  center = [0, 0, tDiscHalf],
-  arcDegrees = 360,
-  rotateDuplicates = true,
-)
-
-// Create outboard half.
-planeOutboard = offsetPlane(XY, offset = tDiscHalf + tVent)
-discOutboard = createDiscHalf(
-  plane = planeOutboard,
-  dDiscParam = dDisc,
-  hFrictionSurfaceParam = hFrictionSurface,
-  tDiscHalfParam = tDiscHalf,
-)
-
-// Now create bell.
-rCenter = dDisc / 2 - hFrictionSurface - wUndercut
-rBore = dBore / 2
-lDraftExterior = hBellAboveDiscFace / tan(90 - aDraftBell)
-lDraftInterior = (hBellAboveDiscFace - tBell) / tan(90 - aDraftBell)
-
-// Inner and outer radius of outboard face of disc bell.
-rOuter = rCenter - lDraftExterior - rBore
-rInner = rOuter + lDraftExterior - (tBell + lDraftInterior)
-
-sketchDiscBell = startSketchOn(-YZ)
-bodyDiscBell = startProfile(
-       sketchDiscBell,
-       at = [
-         -dDisc / 2 + hFrictionSurface,
-         tDiscHalf * 2 + tVent
-       ],
-     )
-  |> arc(
-       %,
-       angleStart = -180,
-       angleEnd = 0,
-       radius = wUndercut / 2,
-     )
-  |> line(end = [lDraftExterior, hBellAboveDiscFace])
-  |> xLine(length = rOuter, tag = $seg04)
-  |> yLine(length = -tBell)
-  |> xLine(length = -rInner)
-  |> line(end = [-lDraftInterior, -hBellAboveDiscFace])
-  |> line(end = [0, -2]) // Wall thickness.
-  |> xLine(length = -1 * (tBell + wUndercut))
-  |> close(%)
-  |> revolve(axis = Y)
-
-// Drill lug holes.
-sketchLugs = startSketchOn(bodyDiscBell, face = seg04)
-profileStud = circle(sketchLugs, center = [0, dPitchCircle / 2], radius = dStudDrilling / 2)
-  |> patternCircular2d(
-       %,
-       instances = nStuds,
-       center = [0, 0],
-       arcDegrees = 360,
-       rotateDuplicates = true,
-     )
-
-clearance = 2 // Some margin on negative extrude.
-lugs = extrude(profileStud, length = -1 * (tBell + clearance))

public/kcl-samples/curtain-wall-anchor-plate/main.kcl

@@ -1,155 +0,0 @@
-// Curtain Wall Anchor Plate
-// A structural steel L-plate used to anchor curtain wall systems to concrete slabs, with elongated holes for adjustability and bolts with nuts and base plates for secure fastening
-
-// Set units in millimeters (mm)
-@settings(defaultLengthUnit = mm, kclVersion = 1.0)
-
-// Define parameters
-slabPlateBaseLength = 300
-slabPlateHookLength = 80
-slabPlateWidth = 200
-slabPlateThickness = 8
-offsetSlabRail = 200
-
-// Generate L-shaped anchor profile with base and hook flange
-// Includes fillets at internal and external corners for strength and safety
-fn lProfileFn(lengthBase, lengthHook, width, thickness) {
-  profilePlane = startSketchOn(offsetPlane(XZ, offset = -width / 2))
-  profileShape = startProfile(profilePlane, at = [0, 0])
-    |> yLine(length = lengthHook, tag = $hookOutside)
-    |> xLine(length = thickness)
-    |> yLine(length = thickness - lengthHook, tag = $hookInside)
-    |> xLine(length = lengthBase - thickness, tag = $baseInside)
-    |> yLine(length = -thickness)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $baseOutside)
-    |> close()
-  profileBody = extrude(profileShape, length = width)
-    |> fillet(
-         radius = thickness,
-         tags = [
-           getCommonEdge(faces = [baseInside, hookInside])
-         ],
-       )
-    |> fillet(
-         radius = thickness * 2,
-         tags = [
-           getCommonEdge(faces = [baseOutside, hookOutside])
-         ],
-       )
-  return profileBody
-}
-
-// Create a hexagonal shape used for bolt and nut heads
-fn hexagonFn(plane, radius) {
-  shape = startProfile(plane, at = [-radius, 0])
-    |> angledLine(angle = 60, length = radius)
-    |> xLine(length = radius)
-    |> angledLine(angle = -60, length = radius)
-    |> angledLine(angle = -120, length = radius)
-    |> xLine(length = -radius)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-  return shape
-}
-
-// Build a bolt with a hexagonal head and cylindrical shaft
-fn boltFn(diameter, length) {
-  boltHeadPlane = startSketchOn(XY)
-  boltHeadShape = hexagonFn(plane = boltHeadPlane, radius = diameter)
-  boltHeadBody = extrude(boltHeadShape, length = diameter * 0.7)
-  boltPlane = startSketchOn(boltHeadBody, face = START)
-  boltShape = circle(boltPlane, center = [0, 0], radius = diameter / 2)
-  boltBody = extrude(boltShape, length = length)
-  return boltBody
-}
-
-// Construct a bolt assembly with base plate and hex nut
-// Assembles all parts for realistic anchor simulation
-fn boltWithPlateAndNutFn(diameter, length, gap) {
-  plateSide = diameter * 3
-  plateplane = startSketchOn(offsetPlane(XY, offset = -gap))
-  plateShape = startProfile(plateplane, at = [-plateSide / 2, -plateSide / 2])
-    |> yLine(length = plateSide)
-    |> xLine(length = plateSide)
-    |> yLine(length = -plateSide)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-  plateBody = extrude(plateShape, length = -diameter * 0.3)
-  nutPlane = startSketchOn(plateBody, face = START)
-  boltHeadShape = hexagonFn(plane = nutPlane, radius = 12)
-  boltHeadBody = extrude(boltHeadShape, length = diameter * 0.7)
-  boltBody = boltFn(diameter = diameter, length = gap + diameter + 3)
-  mergedBody = union([boltHeadBody, boltBody])
-  return mergedBody
-}
-
-// Generate the plate geometry with a vertical hook for slab attachment
-slabPlate = lProfileFn(
-  lengthBase = slabPlateBaseLength,
-  lengthHook = slabPlateHookLength,
-  width = slabPlateWidth,
-  thickness = slabPlateThickness,
-)
-
-// Define oblong holes for bolts, allowing positional adjustment
-wideHoleWidth = 12
-wideHoleLength = 60
-wideHoleOffset = 30
-
-// Two slots mirrored across the plate width
-wideHolePlane = startSketchOn(XY)
-wideHoleShape = startProfile(
-       wideHolePlane,
-       at = [
-         -(wideHoleLength - wideHoleWidth) / 2,
-         wideHoleWidth / 2
-       ],
-     )
-  |> xLine(length = wideHoleLength - wideHoleWidth)
-  |> tangentialArc(endAbsolute = [
-       (wideHoleLength - wideHoleWidth) / 2,
-       -wideHoleWidth / 2
-     ])
-  |> xLine(length = wideHoleWidth - wideHoleLength)
-  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-  |> translate(
-       %,
-       x = offsetSlabRail,
-       y = wideHoleOffset - (slabPlateWidth / 2),
-       z = -1,
-     )
-wideHoleVoidLeft = extrude(wideHoleShape, length = slabPlateThickness + 2)
-wideHoleVoidRight = clone(wideHoleVoidLeft)
-  |> translate(
-       %,
-       x = 0,
-       y = slabPlateWidth - (wideHoleOffset * 2),
-       z = 0,
-     )
-
-// Cut the holes into the anchor plate body
-slabPlatePunchOne = subtract([slabPlate], tools = [wideHoleVoidLeft])
-slabPlatePunchTwo = subtract([slabPlatePunchOne], tools = [wideHoleVoidRight])
-
-// Add two bolt assemblies into the oblong slots
-// Properly rotated and spaced to match anchor hole layout
-slabPlateBolts = boltWithPlateAndNutFn(diameter = 10, length = 20, gap = slabPlateThickness + 5)
-  |> rotate(
-       %,
-       roll = 180,
-       pitch = 0,
-       yaw = 0,
-     )
-  |> translate(
-       %,
-       x = offsetSlabRail,
-       y = wideHoleOffset - (slabPlateWidth / 2),
-       z = 5,
-     )
-  |> patternLinear3d(
-       %,
-       instances = 2,
-       distance = slabPlateWidth - (wideHoleOffset * 2),
-       axis = [0, -1, 0],
-     )

public/kcl-samples/engine-valve/main.kcl

@@ -1,79 +0,0 @@
-// Engine Valve
-// A mechanical valve used in internal combustion engines to control intake or exhaust flow
-
-
-
-
-@settings(defaultLengthUnit = mm, kclVersion = 1.0)
-
-// Define parameters
-valveDiameter = 30
-valveLength = 120
-valveHeadLength = valveDiameter * 1.0
-valveHeadThickness = 3
-stemDiameter = 6
-stemHeadLength = 9
-stemLength = valveLength - valveHeadLength - stemHeadLength
-
-// Create the valve head
-valveRadius = valveDiameter / 2
-valveHeadPlane = startSketchOn(XZ)
-valveHeadShape = startProfile(valveHeadPlane, at = [-0.01, valveHeadLength])
-  |> xLine(length = 0.01 - (stemDiameter / 2))
-  |> line(endAbsolute = [0.01 - (stemDiameter / 2), valveRadius])
-  |> tangentialArc(endAbsolute = [-0.8 * valveRadius, valveHeadThickness], tag = $seg01)
-  |> tangentialArc(endAbsolute = [-valveRadius, 0])
-  |> xLine(length = 0.3 * valveRadius)
-  |> arc(
-       interiorAbsolute = [
-         -0.34 * valveRadius,
-         0.08 * valveRadius
-       ],
-       endAbsolute = [
-         -0.02 * valveRadius,
-         0.11 * valveRadius
-       ],
-     )
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-valveHead = revolve(valveHeadShape, angle = 360, axis = Y)
-
-// Create the valve stem
-valveStemSketch = startSketchOn(offsetPlane(XY, offset = valveHeadLength))
-  |> circle(center = [0, 0], radius = stemDiameter / 2)
-  |> extrude(length = stemLength - valveHeadLength - stemHeadLength)
-
-// Create the valve stem end
-stepLength = stemHeadLength / 10
-step1 = startSketchOn(valveStemSketch, face = END)
-  |> circle(%, center = [0, 0], radius = stemDiameter / 2 * 0.9)
-  |> extrude(%, length = stepLength * 2)
-step2 = startSketchOn(step1, face = END)
-  |> circle(%, center = [0, 0], radius = stemDiameter / 2 * 0.8)
-  |> extrude(%, length = stepLength)
-step3 = startSketchOn(step2, face = END)
-  |> circle(%, center = [0, 0], radius = stemDiameter / 2 * 0.9)
-  |> extrude(%, length = stepLength)
-step4 = startSketchOn(step3, face = END)
-  |> circle(%, center = [0, 0], radius = stemDiameter / 2 * 0.8)
-  |> extrude(%, length = stepLength)
-step5 = startSketchOn(step4, face = END)
-  |> circle(%, center = [0, 0], radius = stemDiameter / 2 * 0.9)
-  |> extrude(%, length = stepLength)
-step6 = startSketchOn(step5, face = END)
-  |> circle(%, center = [0, 0], radius = stemDiameter / 2 * 0.8)
-  |> extrude(%, length = stepLength)
-step7 = startSketchOn(step6, face = END)
-  |> circle(
-       %,
-       center = [0, 0],
-       radius = stemDiameter / 2 * 0.9,
-       tag = $seg02,
-     )
-  |> extrude(%, length = stepLength * 3, tagEnd = $capEnd001)
-  |> chamfer(
-       length = 0.5,
-       tags = [
-         getCommonEdge(faces = [seg02, capEnd001])
-       ],
-     )

public/kcl-samples/manifest.json

@@ -74,16 +74,6 @@
       "main.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "brake-rotor/main.kcl",
-    "multipleFiles": false,
-    "title": "A 320mm vented brake disc (rotor), with straight vanes, 30mm thick. The disc bell should accommodate 5 M12 wheel studs on a 114.3mm pitch circle diameter.",
-    "description": "",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "car-wheel-assembly/main.kcl",
@@ -157,16 +147,6 @@
       "removable-sticker.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "curtain-wall-anchor-plate/main.kcl",
-    "multipleFiles": false,
-    "title": "Curtain Wall Anchor Plate",
-    "description": "A structural steel L-plate used to anchor curtain wall systems to concrete slabs, with elongated holes for adjustability and bolts with nuts and base plates for secure fastening",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "cycloidal-gear/main.kcl",
@@ -197,16 +177,6 @@
       "main.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "engine-valve/main.kcl",
-    "multipleFiles": false,
-    "title": "Engine Valve",
-    "description": "A mechanical valve used in internal combustion engines to control intake or exhaust flow",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "exhaust-manifold/main.kcl",
@@ -452,16 +422,6 @@
       "robot-rotating-base.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "pdu-faceplate/main.kcl",
-    "multipleFiles": false,
-    "title": "Power Distribution Unit (PDU) faceplate with European plug sockets and switch",
-    "description": "Designed for standard 19-inch rack systems with 1U height and 8 sockets",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "pillow-block-bearing/main.kcl",
@@ -552,16 +512,6 @@
       "main.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "sash-window/main.kcl",
-    "multipleFiles": false,
-    "title": "Sash Window",
-    "description": "A traditional wooden sash window with two vertically sliding panels and a central locking mechanism",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "sheet-metal-bracket/main.kcl",
@@ -572,16 +522,6 @@
       "main.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "shepherds-hook-bolt/main.kcl",
-    "multipleFiles": false,
-    "title": "Shepherd’s Hook Bolt",
-    "description": "A bent bolt with a curved hook, typically used for hanging or anchoring loads. The threaded end allows secure attachment to surfaces or materials, while the curved hook resists pull-out under tension.",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "socket-head-cap-screw/main.kcl",
@@ -592,16 +532,6 @@
       "main.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "spinning-highrise-tower/main.kcl",
-    "multipleFiles": false,
-    "title": "Spinning Highrise Tower",
-    "description": "A conceptual high-rise tower with a central core and rotating floor slabs, demonstrating dynamic form through vertical repetition and transformation",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "spur-gear/main.kcl",
@@ -632,16 +562,6 @@
       "main.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "thermal-block-insert/main.kcl",
-    "multipleFiles": false,
-    "title": "Thermal Block Insert",
-    "description": "Interlocking insulation insert for masonry walls, designed with a tongue-and-groove profile for modular alignment and thermal efficiency",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "tooling-nest-block/main.kcl",

public/kcl-samples/pdu-faceplate/main.kcl

@@ -1,240 +0,0 @@
-// Power Distribution Unit (PDU) faceplate with European plug sockets and switch
-// Designed for standard 19-inch rack systems with 1U height and 8 sockets
-
-// Set units in millimeters (mm)
-@settings(defaultLengthUnit = mm, kclVersion = 1.0)
-
-// Define the dimensions
-// Width fits standard 19” rack, height is 1U, depth is variable
-faceplateWidth = 482.6 // this is standardized to fit 19-inch racks)
-faceplateHeight = 44.45 // usually 1U (44.45 mm), but can be 2U (88.9 mm) or more
-faceplateDepth = 100 // varies by manufacturer, but commonly between 100 mm and 300 mm
-
-
-// Define dimensions of side supports (width and thickness)
-supportWidth = 50
-supportThickness = 3
-
-// Main body of the PDU faceplate with integrated rack mounting flanges
-faceplateShape = startSketchOn(offsetPlane(XY, offset = -faceplateHeight / 2))
-  |> startProfile(%, at = [-faceplateWidth / 2 - supportWidth, 0])
-  |> yLine(length = supportThickness)
-  |> xLine(length = supportWidth)
-  |> yLine(length = faceplateDepth - supportThickness)
-  |> xLine(length = faceplateWidth)
-  |> yLine(length = supportThickness - faceplateDepth)
-  |> xLine(length = supportWidth)
-  |> yLine(length = -supportThickness)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg01)
-  |> close()
-faceplateBody = extrude(faceplateShape, length = faceplateHeight)
-faceplateFrontFace = startSketchOn(faceplateBody, face = seg01)
-
-// Creates recessed volume within the faceplate for inserting modules
-nestWall = 2
-nestWidth = faceplateWidth - (nestWall * 2)
-nestHeight = faceplateHeight - (nestWall * 2)
-nestDepth = faceplateDepth - nestWall
-nestShape = startProfile(faceplateFrontFace, at = [-nestWidth / 2, nestHeight / 2])
-  |> xLine(length = nestWidth)
-  |> yLine(length = -nestHeight)
-  |> xLine(length = -nestWidth)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-nestVoid = extrude(nestShape, length = -nestDepth)
-
-// Spacer block on the left side, used to position components correctly
-moduleHeight = nestHeight
-moduleWidth = nestHeight
-moduleDepth = nestHeight
-
-leftSpacerWidth = moduleWidth * 1.5
-leftSpacerPosition = leftSpacerWidth / 2 - (nestWidth / 2)
-
-fn boxModuleFn(width) {
-  shape = startSketchOn(XZ)
-    |> startProfile(%, at = [-width / 2, moduleHeight / 2])
-    |> xLine(length = width)
-    |> yLine(length = -moduleHeight)
-    |> xLine(length = -width)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-  body = extrude(shape, length = -moduleDepth)
-  return body
-}
-leftSpacerShape = boxModuleFn(width = leftSpacerWidth)
-  |> translate(
-       %,
-       x = leftSpacerPosition,
-       y = 0,
-       z = 0,
-     )
-
-// Module for power switch including front plate and red rocker button
-switchPosition = leftSpacerPosition + leftSpacerWidth / 2 + moduleWidth / 2
-swtichWidth = moduleWidth
-
-// Switch Body
-switchBody = boxModuleFn(width = moduleWidth)
-
-// Switch Plate
-swtichPlateWidth = 20
-switchPlateHeight = 30
-switchPlateThickness = 3
-switchPlateShape = startSketchOn(switchBody, face = END)
-  |> startProfile(
-       %,
-       at = [
-         -swtichPlateWidth / 2,
-         -switchPlateHeight / 2
-       ],
-     )
-  |> yLine(length = switchPlateHeight)
-  |> xLine(length = swtichPlateWidth)
-  |> yLine(length = -switchPlateHeight)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-switchPlateBody = extrude(switchPlateShape, length = switchPlateThickness)
-  |> translate(
-       %,
-       x = switchPosition,
-       y = 0,
-       z = 0,
-     )
-
-// Switch Button
-switchButtonHeight = 26
-swtichButtonWidth = 15
-switchButtonShape = startSketchOn(offsetPlane(-YZ, offset = -swtichButtonWidth / 2))
-  |> startProfile(
-       %,
-       at = [
-         switchPlateThickness,
-         switchButtonHeight / 2
-       ],
-     )
-  |> line(end = [3, -1])
-  |> arc(interiorAbsolute = [6, 0], endAbsolute = [12, -9])
-  |> line(endAbsolute = [
-       switchPlateThickness,
-       -switchButtonHeight / 2
-     ])
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-switchButtonBody = extrude(switchButtonShape, length = swtichButtonWidth)
-  |> translate(
-       %,
-       x = switchPosition,
-       y = 0,
-       z = 0,
-     )
-  |> appearance(%, color = "#ff0000")
-
-// Spacer between switch and plug modules for layout alignment
-secondSpacerWidth = moduleWidth / 2
-secondSpacerPosition = switchPosition + swtichWidth / 2 + secondSpacerWidth / 2
-secondSpacerBody = boxModuleFn(width = secondSpacerWidth)
-  |> translate(
-       %,
-       x = secondSpacerPosition,
-       y = 0,
-       z = 0,
-     )
-
-  // European power plug modules with circular sockets and two-pin holes
-// 8 identical sockets, each with grounding notch and dual-pin recesses
-powerPlugWidth = moduleWidth
-powerPlugCount = 8
-powerPlugOveralWidth = powerPlugWidth * powerPlugCount
-firstPowerPlugPosition = secondSpacerPosition + secondSpacerWidth / 2 + powerPlugWidth / 2
-lastPowerPlugPosition = firstPowerPlugPosition + powerPlugWidth * (powerPlugCount - 1)
-powerPlugBody = boxModuleFn(width = powerPlugWidth)
-  |> translate(
-       %,
-       x = firstPowerPlugPosition,
-       y = 0,
-       z = 0,
-     )
-plugShape = startSketchOn(powerPlugBody, face = END)
-  |> circle(%, center = [0, 0], radius = 17)
-  |> translate(
-       %,
-       x = firstPowerPlugPosition,
-       y = 0,
-       z = 0,
-     )
-plugBody = extrude(plugShape, length = -20)
-plugHoleDistance = 20
-plugHoleShape = startSketchOn(plugBody, face = START)
-  |> circle(%, center = [-plugHoleDistance / 2, 0], radius = 3)
-  |> translate(
-       %,
-       x = firstPowerPlugPosition,
-       y = 0,
-       z = 0,
-     )
-  |> patternLinear2d(
-       %,
-       instances = 2,
-       distance = plugHoleDistance,
-       axis = [1, 0],
-     )
-plugHoleBody = extrude(plugHoleShape, length = -5)
-  |> patternLinear3d(
-       %,
-       instances = powerPlugCount,
-       distance = powerPlugWidth,
-       axis = [1, 0, 0],
-     )
-
-// Rightmost spacer to fill in remaining horizontal space
-rightSpacerWidth = nestWidth / 2 - lastPowerPlugPosition - (powerPlugWidth / 2)
-rightSpacerPosition = lastPowerPlugPosition + powerPlugWidth / 2 + rightSpacerWidth / 2
-rightSpacerBody = boxModuleFn(width = rightSpacerWidth)
-  |> translate(
-       %,
-       x = rightSpacerPosition,
-       y = 0,
-       z = 0,
-     )
-
-// Rack mounting holes on flanges, elongated for alignment flexibility
-holeWidth = 25
-holeDiameter = 5
-holeStraightSegment = holeWidth - holeDiameter
-holeVerticalDistance = faceplateHeight * 0.3
-
-holeShapes = startProfile(
-       faceplateFrontFace,
-       at = [
-         -holeStraightSegment / 2,
-         holeDiameter / 2
-       ],
-     )
-  |> xLine(length = holeStraightSegment)
-  |> tangentialArc(endAbsolute = [
-       holeStraightSegment / 2,
-       -holeDiameter / 2
-     ])
-  |> xLine(length = -holeStraightSegment)
-  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-  |> translate(
-       %,
-       x = -faceplateWidth / 2 - (supportWidth / 2),
-       y = 0,
-       z = -holeVerticalDistance,
-     )
-  |> patternLinear2d(
-       %,
-       instances = 3,
-       distance = holeVerticalDistance,
-       axis = [0, 1],
-     )
-  |> patternLinear2d(
-       %,
-       instances = 2,
-       distance = faceplateWidth + supportWidth,
-       axis = [1, 0],
-     )
-holeVoid = extrude(holeShapes, length = -supportThickness)

public/kcl-samples/sash-window/main.kcl

@@ -1,214 +0,0 @@
-// Sash Window
-// A traditional wooden sash window with two vertically sliding panels and a central locking mechanism
-
-// Set units in millimeters (mm)
-@settings(defaultLengthUnit = mm, kclVersion = 1.0)
-
-// Window state: 0 for closed, 1 for open
-windowState = 0
-
-// Basic window dimensions
-windowWidth = 500
-windowHeight = 1000
-
-// Frame thickness and depth
-frameWidth = 30
-frameDepth = 50
-
-// Number of divisions per sash (horizontal and vertical)
-sashOpeningCountHorizontal = 2
-sashOpeningCountVertical = 1
-
-// Derived dimensions
-sashWidth = windowWidth - (frameWidth * 2)
-sashHeight = (windowHeight - (frameWidth * 2)) / 2 + frameWidth / 2
-sashDepth = frameDepth / 2 - 2
-sashTravelDistance = sashHeight * windowState * 0.8
-
-// Function to create panel with frame and openings
-fn panelFn(plane, offset, width, height, depth, perimeter, divisionThickness, openingCountHorizontal, openingCountVertical) {
-  // Create panel base shape
-  panelPlane = startSketchOn(offsetPlane(XZ, offset = offset))
-  panelShape = startProfile(panelPlane, at = [-width / 2, -height / 2])
-    |> yLine(length = height)
-    |> xLine(length = width)
-    |> yLine(length = -height)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-  panelBody = extrude(panelShape, length = depth)
-
-  // Create opening grid within the panel
-  voidAreaWidth = width - (perimeter * 2)
-  voidAreaHeight = height - (perimeter * 2)
-
-  divisionTotalThicknessHorizontal = divisionThickness * openingCountHorizontal - divisionThickness
-  divisionTotalThicknessVertical = divisionThickness * openingCountVertical - divisionThickness
-  voidWidth = (voidAreaWidth - divisionTotalThicknessHorizontal) / openingCountHorizontal
-  voidHeight = (voidAreaHeight - divisionTotalThicknessVertical) / openingCountVertical
-
-  voidStepHorizontal = voidWidth + divisionThickness
-  voidStepVertical = voidHeight + divisionThickness
-  voidPlane = startSketchOn(panelBody, face = END)
-  voidShape = startProfile(
-         voidPlane,
-         at = [
-           -voidAreaWidth / 2,
-           -voidAreaHeight / 2
-         ],
-       )
-    |> yLine(length = voidHeight)
-    |> xLine(length = voidWidth)
-    |> yLine(length = -voidHeight)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-    |> patternLinear2d(
-         %,
-         instances = openingCountHorizontal,
-         distance = voidStepHorizontal,
-         axis = [1, 0],
-       )
-    |> patternLinear2d(
-         %,
-         instances = openingCountVertical,
-         distance = voidStepVertical,
-         axis = [0, 1],
-       )
-  voidBody = extrude(voidShape, length = -depth)
-    |> appearance(color = "#a55e2c")
-  return panelBody
-}
-
-// Create main window frame
-frame = panelFn(
-  plane = XZ,
-  offset = -frameDepth / 2,
-  width = windowWidth,
-  height = windowHeight,
-  depth = frameDepth,
-  perimeter = frameWidth,
-  divisionThickness = 10,
-  openingCountHorizontal = 1,
-  openingCountVertical = 1,
-)
-
-// Create bottom sliding sash
-bottomSash = panelFn(
-       plane = XZ,
-       offset = (frameDepth / 2 - sashDepth) / 2,
-       width = sashWidth,
-       height = sashHeight,
-       depth = sashDepth,
-       perimeter = frameWidth,
-       divisionThickness = 10,
-       openingCountHorizontal = sashOpeningCountHorizontal,
-       openingCountVertical = sashOpeningCountVertical,
-     )
-  |> translate(
-       %,
-       x = 0,
-       y = 0,
-       z = frameWidth / 2 - (sashHeight / 2),
-     )
-  |> translate(
-       %,
-       x = 0,
-       y = 0,
-       z = sashTravelDistance,
-     ) // open / close
-
-  // Latch mechanism on bottom sash
-// Create latch plate
-latchPlateWidth = 13
-latchPlateLength = 30
-latchPlateThickness = 1
-
-latchPlatePlane = startSketchOn(offsetPlane(XY, offset = frameWidth / 2))
-latchPlateShape = startProfile(
-       latchPlatePlane,
-       at = [
-         -latchPlateLength / 2,
-         -latchPlateWidth / 2
-       ],
-     )
-  |> yLine(length = latchPlateWidth)
-  |> xLine(length = latchPlateLength)
-  |> yLine(length = -latchPlateWidth)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-latchPlateBody = extrude(latchPlateShape, length = latchPlateThickness)
-  |> translate(
-       %,
-       x = 0,
-       y = -frameDepth / 4,
-       z = 0,
-     )
-  |> translate(
-       %,
-       x = 0,
-       y = 0,
-       z = sashTravelDistance,
-     ) // open / close
-
-// Create latch cylinder
-latchCylinderHeight = 5
-latchCylinderPlane = startSketchOn(offsetPlane(latchPlatePlane, offset = latchPlateThickness))
-latchCylinderShape = startProfile(latchCylinderPlane, at = [40, -1])
-  |> xLine(length = -35)
-  |> arc(interiorAbsolute = [-5, 0], endAbsolute = [5, 1])
-  |> xLine(length = 35)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-latchCylinderBody = extrude(latchCylinderShape, length = latchCylinderHeight)
-  |> translate(
-       %,
-       x = 0,
-       y = -frameDepth / 4,
-       z = 0,
-     )
-  |> translate(
-       %,
-       x = 0,
-       y = 0,
-       z = sashTravelDistance,
-     ) // open / close
-  |> rotate(
-       %,
-       roll = 0,
-       pitch = 0,
-       yaw = -90 * windowState,
-     )
-
-// Create top fixed sash
-topSash = panelFn(
-       plane = XZ,
-       offset = -(frameDepth / 2 - sashDepth) / 2 - sashDepth,
-       width = sashWidth,
-       height = sashHeight,
-       depth = sashDepth,
-       perimeter = frameWidth,
-       divisionThickness = 10,
-       openingCountHorizontal = sashOpeningCountHorizontal,
-       openingCountVertical = sashOpeningCountVertical,
-     )
-  |> translate(
-       %,
-       x = 0,
-       y = 0,
-       z = sashHeight / 2 - (frameWidth / 2),
-     )
-
-// Create latch nut on the top sash
-latchNutPlane = startSketchOn(XZ)
-latchNutShape = startProfile(
-       latchNutPlane,
-       at = [
-         -latchPlateLength / 2,
-         -latchPlateWidth / 2
-       ],
-     )
-  |> yLine(length = latchPlateWidth)
-  |> xLine(length = latchPlateLength)
-  |> yLine(length = -latchPlateWidth)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-latchNutPlateBody = extrude(latchNutShape, length = latchPlateThickness)

public/kcl-samples/shepherds-hook-bolt/main.kcl

@@ -1,89 +0,0 @@
-// Shepherd’s Hook Bolt
-// A bent bolt with a curved hook, typically used for hanging or anchoring loads. The threaded end allows secure attachment to surfaces or materials, while the curved hook resists pull-out under tension.
-
-// Set units in millimeters (mm)
-@settings(defaultLengthUnit = mm, kclVersion = 1.0)
-
-// Define bolt geometry parameters
-boltDiameter = 5
-hookRadius = 12
-shankLength = 5
-threadedEndLength = 30
-nutDistance = 20
-hookStartAngle = 290
-hookEndAngle = 150
-
-approximatePitch = boltDiameter * 0.15
-threadDepth = 0.6134 * approximatePitch
-innerRadius = boltDiameter / 2 - threadDepth
-boltNumberOfRevolutions = threadedEndLength / approximatePitch
-
-// Helper values for computing geometry transitions between straight shaft and hook arc
-hypotenuse = hookRadius / cos(hookStartAngle - 270)
-side = sqrt(pow(hypotenuse, exp = 2) - pow(hookRadius, exp = 2))
-shankOffset = hypotenuse + side
-
-// Converts polar coordinates to cartesian points for drawing arcs
-fn polarToCartesian(radius, angle) {
-  x = radius * cos(angle)
-  y = radius * sin(angle)
-  return [x, y]
-}
-
-// Create the hook and shank profile path
-// Includes straight segment and two connected arcs forming the hook
-hookProfilePlane = startSketchOn(XZ)
-hookProfileShape = startProfile(hookProfilePlane, at = [0, -shankOffset - shankLength])
-  |> line(endAbsolute = [0, -shankOffset])
-  |> tangentialArc(endAbsolute = polarToCartesian(radius = hookRadius, angle = hookStartAngle))
-  |> tangentialArc(endAbsolute = polarToCartesian(radius = hookRadius, angle = hookEndAngle), tag = $hook)
-
-// Create the circular cross-section used for sweeping along the hook path
-hookSectionPlane = offsetPlane(XY, offset = -shankOffset - shankLength)
-hookSectionShape = circle(hookSectionPlane, center = [0, 0], radius = boltDiameter / 2)
-
-// Sweep the section along the hook profile to form the main body of the hook bolt
-hookBody = sweep(hookSectionShape, path = hookProfileShape, sectional = true)
-
-// Add a cylindrical tip at the hook end
-tipPlane = startSketchOn(hookBody, face = END)
-tipShape = circle(
-  tipPlane,
-  center = [hookRadius, 0],
-  radius = boltDiameter / 2,
-  tag = $seg01,
-)
-tipBody = extrude(
-       tipShape,
-       length = hookRadius * 0.5,
-       tagStart = $startTag,
-       tagEnd = $capEnd001,
-     )
-  |> fillet(
-       radius = boltDiameter / 4,
-       tags = [
-         getCommonEdge(faces = [seg01, capEnd001])
-       ],
-     )
-
-  // Create the threaded end of the bolt
-
-// Construct the triangular profile for thread cutting
-boltThreadSectionPlane = startSketchOn(XZ)
-boltThreadSectionShapeForRevolve = startProfile(
-       boltThreadSectionPlane,
-       at = [
-         innerRadius,
-         -shankOffset - shankLength - threadedEndLength
-       ],
-     )
-  |> line(end = [threadDepth, approximatePitch / 2])
-  |> line(end = [-threadDepth, approximatePitch / 2])
-  |> patternLinear2d(axis = [0, 1], instances = boltNumberOfRevolutions, distance = approximatePitch)
-  |> xLine(length = -innerRadius * 0.9)
-  |> yLine(length = -threadedEndLength)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-
-// Create a revolved solid representing the thread geometry by repeating and revolving the profile around the shaft
-boltThreadRevolve = revolve(boltThreadSectionShapeForRevolve, angle = 360, axis = Y)

public/kcl-samples/spinning-highrise-tower/main.kcl

@@ -1,93 +0,0 @@
-// Spinning Highrise Tower
-// A conceptual high-rise tower with a central core and rotating floor slabs, demonstrating dynamic form through vertical repetition and transformation
-
-
-
-
-@settings(defaultLengthUnit = m, kclVersion = 1.0)
-
-// Define global parameters for floor geometry and building layout
-floorCount = 17
-floorHeight = 5
-slabWidth = 30
-slabThickness = 0.5
-rotationAngleStep = 5
-handrailHeight = 1.2
-handrailThickness = 0.3
-balconyDepth = 3
-
-// Calculate facade and core geometry from parameters
-facadeWidth = slabWidth - (balconyDepth * 2)
-facadeHeight = floorHeight - slabThickness
-coreHeight = floorCount * floorHeight - slabThickness
-frameSide = 0.1
-windowTargetWidth = 6
-windowTargetCount = facadeWidth / windowTargetWidth
-windowCount = round(windowTargetCount)
-windowWidth = facadeWidth / windowCount
-
-// Helper function: Creates a box from a center plane with given width and height
-fn boxFn(plane, width, height) {
-  shape = startSketchOn(plane)
-    |> startProfile(%, at = [-width / 2, -width / 2])
-    |> line(%, end = [0, width])
-    |> line(%, end = [width, 0])
-    |> line(%, end = [0, -width])
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close(%)
-  body = extrude(shape, length = height)
-  return body
-}
-
-// Helper function: Defines transformation (translation and rotation) for each floor
-fn transformFn(@i) {
-  return {
-    translate = [0, 0, i * floorHeight],
-    rotation = { angle = rotationAngleStep * i }
-  }
-}
-
-// Create building base
-baseThickness = 0.2
-baseSlab = boxFn(plane = XY, width = slabWidth, height = -baseThickness)
-  |> appearance(%, color = "#dbd7d2")
-
-// Create ground platform beneath the base
-goundSize = 50
-groundBody = boxFn(plane = offsetPlane(XY, offset = -baseThickness), width = goundSize, height = -5)
-  |> appearance(%, color = "#3a3631")
-
-// Create a single slab with handrail height to be reused with pattern
-slabAndHandrailGeometry = boxFn(plane = offsetPlane(XY, offset = floorHeight - slabThickness), width = slabWidth, height = slabThickness + handrailHeight)
-slabVoidStart = -slabWidth / 2 + handrailThickness
-slabVoidWidth = slabWidth - (handrailThickness * 2)
-slabVoidShape = startSketchOn(slabAndHandrailGeometry, face = END)
-  |> startProfile(%, at = [slabVoidStart, slabVoidStart])
-  |> line(%, end = [0, slabVoidWidth])
-  |> line(%, end = [slabVoidWidth, 0])
-  |> line(%, end = [0, -slabVoidWidth])
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close(%)
-
-// Generate and pattern slabs with voids across all floors
-slabBody = extrude(slabVoidShape, length = -handrailHeight)
-  |> patternTransform(instances = floorCount, transform = transformFn)
-  |> appearance(%, color = "#dbd7d2")
-
-// Create structural core of the tower
-coreLength = 10
-coreWidth = 8
-core = startSketchOn(XY)
-  |> startProfile(%, at = [-coreLength / 2, -coreWidth / 2])
-  |> line(%, end = [0, coreWidth])
-  |> line(%, end = [coreLength, 0])
-  |> line(%, end = [-0.22, -coreWidth])
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close(%)
-  |> extrude(%, length = coreHeight)
-
-// Create facade panels for each floor
-facadeStart = facadeWidth / 2
-facadeGeometry = boxFn(plane = XY, width = facadeWidth, height = facadeHeight)
-  |> patternTransform(instances = floorCount, transform = transformFn)
-  |> appearance(%, color = "#151819")

public/kcl-samples/thermal-block-insert/main.kcl

@@ -1,61 +0,0 @@
-// Thermal Block Insert
-// Interlocking insulation insert for masonry walls, designed with a tongue-and-groove profile for modular alignment and thermal efficiency
-
-// Set units in millimeters (mm)
-@settings(defaultLengthUnit = mm, kclVersion = 1.0)
-
-// Define overall dimensions of the insert block
-insertLength = 400
-insertHeight = 200
-insertThickness = 50
-
-// Define tongue-and-groove profile parameters for interlocking geometry
-setbackFactor = 0.25 // spacing between tongues
-tongueTargetCount = insertLength / 80
-tongueCount = round(tongueTargetCount)
-tongueLength = insertLength / (tongueCount * (1 + setbackFactor * 2) + 1)
-tongueGap = tongueLength * setbackFactor * 2
-tongueStep = tongueLength + tongueGap
-tongueDepth = tongueLength * 0.5
-tongueSetback = tongueLength * setbackFactor
-
-// Function to create one side of the repeating tongue geometry along the block edge
-fn tongueBlockFn() {
-  tongueSingleBlock = xLine(length = tongueLength)
-    |> line(end = [-tongueSetback, tongueDepth])
-    |> xLine(length = tongueLength)
-    |> line(end = [-tongueSetback, -tongueDepth])
-    |> patternLinear2d(
-         %,
-         instances = tongueCount,
-         distance = tongueStep,
-         axis = [1, 0],
-       )
-    |> xLine(length = tongueLength)
-  return tongueSingleBlock
-}
-
-// Create top-side profile with tongues
-tongueShape = startSketchOn(XY)
-  |> startProfile(%, at = [-insertLength / 2, insertThickness / 2])
-  |> tongueBlockFn()
-  |> yLine(length = -insertThickness / 2)
-  |> xLine(length = -insertLength)
-  |> close(%)
-
-// Create bottom-side profile with grooves (inverse of tongue)
-grooveShape = startSketchOn(XY)
-  |> startProfile(
-       %,
-       at = [
-         -insertLength / 2,
-         -insertThickness / 2 - tongueDepth
-       ],
-     )
-  |> tongueBlockFn()
-  |> yLine(length = insertThickness / 2 + tongueDepth)
-  |> xLine(length = -insertLength)
-  |> close(%)
-
-// Extrude both tongue and groove profiles to form the final thermal insert block
-insertShape = extrude([tongueShape, grooveShape], length = insertHeight)

rust/Cargo.lock

@@ -1815,7 +1815,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-bumper"
-version = "0.1.75"
+version = "0.1.73"
 dependencies = [
  "anyhow",
  "clap",
@@ -1826,7 +1826,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-derive-docs"
-version = "0.1.75"
+version = "0.1.73"
 dependencies = [
  "Inflector",
  "anyhow",
@@ -1845,9 +1845,8 @@ dependencies = [
 
 [[package]]
 name = "kcl-directory-test-macro"
-version = "0.1.75"
+version = "0.1.73"
 dependencies = [
- "convert_case",
  "proc-macro2",
  "quote",
  "syn 2.0.100",
@@ -1855,7 +1854,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-language-server"
-version = "0.2.75"
+version = "0.2.73"
 dependencies = [
  "anyhow",
  "clap",
@@ -1876,7 +1875,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-language-server-release"
-version = "0.1.75"
+version = "0.1.73"
 dependencies = [
  "anyhow",
  "clap",
@@ -1896,7 +1895,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-lib"
-version = "0.2.75"
+version = "0.2.73"
 dependencies = [
  "anyhow",
  "approx 0.5.1",
@@ -1935,7 +1934,6 @@ dependencies = [
  "measurements",
  "miette",
  "mime_guess",
- "nalgebra-glm",
  "parse-display 0.10.0",
  "pretty_assertions",
  "pyo3",
@@ -1973,7 +1971,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-python-bindings"
-version = "0.3.75"
+version = "0.3.73"
 dependencies = [
  "anyhow",
  "kcl-lib",
@@ -1988,7 +1986,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-test-server"
-version = "0.1.75"
+version = "0.1.73"
 dependencies = [
  "anyhow",
  "hyper 0.14.32",
@@ -2001,7 +1999,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-to-core"
-version = "0.1.75"
+version = "0.1.73"
 dependencies = [
  "anyhow",
  "async-trait",
@@ -2015,7 +2013,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-wasm-lib"
-version = "0.1.75"
+version = "0.1.73"
 dependencies = [
  "anyhow",
  "bson",
@@ -2255,16 +2253,6 @@ dependencies = [
  "pkg-config",
 ]
 
-[[package]]
-name = "matrixmultiply"
-version = "0.3.10"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a06de3016e9fae57a36fd14dba131fccf49f74b40b7fbdb472f96e361ec71a08"
-dependencies = [
- "autocfg",
- "rawpointer",
-]
-
 [[package]]
 name = "measurements"
 version = "0.11.0"
@@ -2385,33 +2373,6 @@ dependencies = [
  "windows-sys 0.52.0",
 ]
 
-[[package]]
-name = "nalgebra"
-version = "0.33.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "26aecdf64b707efd1310e3544d709c5c0ac61c13756046aaaba41be5c4f66a3b"
-dependencies = [
- "approx 0.5.1",
- "matrixmultiply",
- "num-complex",
- "num-rational",
- "num-traits 0.2.19",
- "simba",
- "typenum",
-]
-
-[[package]]
-name = "nalgebra-glm"
-version = "0.19.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e441f43bccdf40cb6bd4294321e6983c5bc7b9886112d19fd4c9813976b117e4"
-dependencies = [
- "approx 0.5.1",
- "nalgebra",
- "num-traits 0.2.19",
- "simba",
-]
-
 [[package]]
 name = "newline-converter"
 version = "0.3.0"
@@ -2451,15 +2412,6 @@ dependencies = [
  "num-traits 0.2.19",
 ]
 
-[[package]]
-name = "num-complex"
-version = "0.4.6"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "73f88a1307638156682bada9d7604135552957b7818057dcef22705b4d509495"
-dependencies = [
- "num-traits 0.2.19",
-]
-
 [[package]]
 name = "num-conv"
 version = "0.1.0"
@@ -2490,17 +2442,6 @@ dependencies = [
  "num-modular",
 ]
 
-[[package]]
-name = "num-rational"
-version = "0.4.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f83d14da390562dca69fc84082e73e548e1ad308d24accdedd2720017cb37824"
-dependencies = [
- "num-bigint",
- "num-integer",
- "num-traits 0.2.19",
-]
-
 [[package]]
 name = "num-traits"
 version = "0.1.43"
@@ -2654,12 +2595,6 @@ dependencies = [
  "syn 2.0.100",
 ]
 
-[[package]]
-name = "paste"
-version = "1.0.15"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "57c0d7b74b563b49d38dae00a0c37d4d6de9b432382b2892f0574ddcae73fd0a"
-
 [[package]]
 name = "pbkdf2"
 version = "0.12.2"
@@ -3158,12 +3093,6 @@ dependencies = [
  "getrandom 0.3.1",
 ]
 
-[[package]]
-name = "rawpointer"
-version = "0.2.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "60a357793950651c4ed0f3f52338f53b2f809f32d83a07f72909fa13e4c6c1e3"
-
 [[package]]
 name = "rayon"
 version = "1.10.0"
@@ -3447,15 +3376,6 @@ version = "1.0.20"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "28d3b2b1366ec20994f1fd18c3c594f05c5dd4bc44d8bb0c1c632c8d6829481f"
 
-[[package]]
-name = "safe_arch"
-version = "0.7.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "96b02de82ddbe1b636e6170c21be622223aea188ef2e139be0a5b219ec215323"
-dependencies = [
- "bytemuck",
-]
-
 [[package]]
 name = "same-file"
 version = "1.0.6"
@@ -3711,19 +3631,6 @@ dependencies = [
  "libc",
 ]
 
-[[package]]
-name = "simba"
-version = "0.9.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b3a386a501cd104797982c15ae17aafe8b9261315b5d07e3ec803f2ea26be0fa"
-dependencies = [
- "approx 0.5.1",
- "num-complex",
- "num-traits 0.2.19",
- "paste",
- "wide",
-]
-
 [[package]]
 name = "simd-adler32"
 version = "0.3.7"
@@ -4824,16 +4731,6 @@ dependencies = [
  "rustls-pki-types",
 ]
 
-[[package]]
-name = "wide"
-version = "0.7.32"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "41b5576b9a81633f3e8df296ce0063042a73507636cbe956c61133dd7034ab22"
-dependencies = [
- "bytemuck",
- "safe_arch",
-]
-
 [[package]]
 name = "winapi"
 version = "0.3.9"

rust/kcl-bumper/Cargo.toml

@@ -1,7 +1,7 @@
 
 [package]
 name = "kcl-bumper"
-version = "0.1.75"
+version = "0.1.73"
 edition = "2021"
 repository = "https://github.com/KittyCAD/modeling-api"
 rust-version = "1.76"

rust/kcl-derive-docs/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-derive-docs"
 description = "A tool for generating documentation from Rust derive macros"
-version = "0.1.75"
+version = "0.1.73"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"

rust/kcl-directory-test-macro/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-directory-test-macro"
 description = "A tool for generating tests from a directory of kcl files"
-version = "0.1.75"
+version = "0.1.73"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"
@@ -11,7 +11,6 @@ proc-macro = true
 bench = false
 
 [dependencies]
-convert_case = "0.8.0"
 proc-macro2 = "1"
 quote = "1"
 syn = { version = "2.0.96", features = ["full"] }

rust/kcl-directory-test-macro/src/lib.rs

@@ -1,13 +1,10 @@
 use std::fs;
 
-use convert_case::Casing;
 use proc_macro::TokenStream;
 use quote::{format_ident, quote};
 use syn::{parse_macro_input, LitStr};
 
 /// A macro that generates test functions for each directory within a given path.
-/// To be included the test directory must have a main.kcl file.
-/// This will also recursively search for directories within the given path.
 ///
 /// # Example
 ///
@@ -48,11 +45,7 @@ pub fn test_all_dirs(attr: TokenStream, item: TokenStream) -> TokenStream {
 
     // Generate a test function for each directory
     let test_fns = dirs.iter().map(|(dir_name, dir_path)| {
-        let relative_path = dir_path
-            .strip_prefix(&path.to_string_lossy().to_string())
-            .unwrap()
-            .trim();
-        let test_fn_name = format_ident!("{}_{}", fn_name, sanitize_dir_name(relative_path));
+        let test_fn_name = format_ident!("{}_{}", fn_name, sanitize_dir_name(dir_name));
         let dir_name_str = dir_name.clone();
         let dir_path_str = dir_path.clone();
 
@@ -82,26 +75,16 @@ fn get_all_directories(path: &std::path::Path) -> Result<Vec<(String, String)>,
 
     for entry in fs::read_dir(path)? {
         let entry = entry?;
-        let new_path = entry.path();
+        let path = entry.path();
 
-        if new_path.is_dir()
-            && !IGNORE_DIRS.contains(&new_path.file_name().and_then(|name| name.to_str()).unwrap_or(""))
-        {
-            // Check if the directory contains a main.kcl file.
-            let main_kcl_path = new_path.join("main.kcl");
-            if !main_kcl_path.exists() {
-                // Recurse into the directory.
-                let sub_dirs = get_all_directories(&new_path)?;
-                dirs.extend(sub_dirs);
-                continue;
-            }
-            let dir_name = new_path
+        if path.is_dir() && !IGNORE_DIRS.contains(&path.file_name().and_then(|name| name.to_str()).unwrap_or("")) {
+            let dir_name = path
                 .file_name()
                 .and_then(|name| name.to_str())
                 .unwrap_or("unknown")
                 .to_string();
 
-            let dir_path = new_path.to_str().unwrap_or("unknown").to_string();
+            let dir_path = path.to_str().unwrap_or("unknown").to_string();
 
             dirs.push((dir_name, dir_path));
         }
@@ -112,9 +95,10 @@ fn get_all_directories(path: &std::path::Path) -> Result<Vec<(String, String)>,
 
 /// Sanitize directory name to create a valid Rust identifier
 fn sanitize_dir_name(name: &str) -> String {
-    let binding = name
-        .replace(|c: char| !c.is_ascii_alphanumeric() && c != '_', "_")
-        .replace("/", "_");
-    let name = binding.trim_start_matches('_').to_string();
-    name.to_case(convert_case::Case::Snake)
+    let name = name.replace(|c: char| !c.is_ascii_alphanumeric() && c != '_', "_");
+    if name.chars().next().is_some_and(|c| c.is_numeric()) {
+        format!("d_{}", name)
+    } else {
+        name
+    }
 }

rust/kcl-language-server-release/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "kcl-language-server-release"
-version = "0.1.75"
+version = "0.1.73"
 edition = "2021"
 authors = ["KittyCAD Inc <kcl@kittycad.io>"]
 publish = false