Cut release v0.22.4 (#2748)

Signed-off-by: Jess Frazelle <github@jessfraz.com>

.github/workflows/cargo-check.yml

@@ -0,0 +1,40 @@
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '**/Cargo.toml'
+      - '**/Cargo.lock'
+      - '**/rust-toolchain.toml'
+      - '**.rs'
+      - .github/workflows/cargo-check.yml
+  pull_request:
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+name: cargo check
+jobs:
+  cargocheck:
+    name: cargo check
+    runs-on: ubuntu-latest
+    strategy:
+      matrix:
+        dir: ['src/wasm-lib']
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install latest rust
+        uses: actions-rs/toolchain@v1
+        with:
+            toolchain: stable
+            override: true
+
+      - name: Rust Cache
+        uses: Swatinem/rust-cache@v2.6.1
+
+      - name: Run check
+        run: |
+          cd "${{ matrix.dir }}"
+          # We specifically want to test the disable-println feature
+          # Since it is not enabled by default, we need to specify it
+          # This is used in kcl-lsp
+          cargo check --all --features disable-println --features pyo3

.github/workflows/cargo-clippy.yml

@@ -9,6 +9,12 @@ on:
       - '**.rs'
       - .github/workflows/cargo-clippy.yml
   pull_request:
+    paths:
+      - '**/Cargo.toml'
+      - '**/Cargo.lock'
+      - '**/rust-toolchain.toml'
+      - '**.rs'
+      - .github/workflows/cargo-clippy.yml
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true

.github/workflows/playwright.yml

@@ -57,7 +57,7 @@ jobs:
     - name: Download Wasm Cache
       id: download-wasm
       if: needs.check-rust-changes.outputs.rust-changed == 'false'
-      uses: dawidd6/action-download-artifact@v5
+      uses: dawidd6/action-download-artifact@v6
       continue-on-error: true
       with:
         github_token: ${{secrets.GITHUB_TOKEN}}
@@ -133,7 +133,7 @@ jobs:
     - uses: actions/upload-artifact@v3
       if: always()
       with:
-        name: playwright-report
+        name: playwright-report-ubuntu
         path: playwright-report/
         retention-days: 30
 
@@ -162,7 +162,7 @@ jobs:
     - name: Download Wasm Cache
       id: download-wasm
       if: needs.check-rust-changes.outputs.rust-changed == 'false'
-      uses: dawidd6/action-download-artifact@v5
+      uses: dawidd6/action-download-artifact@v6
       continue-on-error: true
       with:
         github_token: ${{secrets.GITHUB_TOKEN}}
@@ -204,6 +204,6 @@ jobs:
     - uses: actions/upload-artifact@v3
       if: always()
       with:
-        name: playwright-report
+        name: playwright-report-macos
         path: playwright-report/
         retention-days: 30

README.md

@@ -319,7 +319,7 @@ PS: for the debug panel, the following JSON is useful for snapping the camera
 
 ```
 yarn install
-yarn build:wasm
+yarn build:wasm-dev
 cp src/wasm-lib/pkg/wasm_lib_bg.wasm public
 yarn vite build --mode development
 yarn tauri build --debug -b

docs/kcl/angleToMatchLengthX.md

@@ -36,8 +36,6 @@ const extrusion = extrude(5, sketch001)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -73,8 +71,6 @@ const extrusion = extrude(5, sketch001)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -101,10 +97,6 @@ const extrusion = extrude(5, sketch001)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -179,24 +171,6 @@ const extrusion = extrude(5, sketch001)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/angleToMatchLengthY.md

@@ -37,8 +37,6 @@ const extrusion = extrude(5, sketch001)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -74,8 +72,6 @@ const extrusion = extrude(5, sketch001)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -102,10 +98,6 @@ const extrusion = extrude(5, sketch001)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -180,24 +172,6 @@ const extrusion = extrude(5, sketch001)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/angledLine.md

@@ -43,8 +43,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -80,8 +78,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -108,10 +104,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -186,24 +178,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -213,8 +187,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -250,8 +222,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -278,10 +248,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -356,24 +322,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/angledLineOfXLength.md

@@ -42,8 +42,6 @@ const extrusion = extrude(10, sketch001)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -79,8 +77,6 @@ const extrusion = extrude(10, sketch001)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -107,10 +103,6 @@ const extrusion = extrude(10, sketch001)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -185,24 +177,6 @@ const extrusion = extrude(10, sketch001)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -212,8 +186,6 @@ const extrusion = extrude(10, sketch001)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -249,8 +221,6 @@ const extrusion = extrude(10, sketch001)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -277,10 +247,6 @@ const extrusion = extrude(10, sketch001)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -355,24 +321,6 @@ const extrusion = extrude(10, sketch001)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/angledLineOfYLength.md

@@ -44,8 +44,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -81,8 +79,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -109,10 +105,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -187,24 +179,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -214,8 +188,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -251,8 +223,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -279,10 +249,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -357,24 +323,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/angledLineThatIntersects.md

@@ -48,8 +48,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -85,8 +83,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -113,10 +109,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -191,24 +183,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -218,8 +192,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -255,8 +227,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -283,10 +253,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -361,24 +327,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/angledLineToX.md

@@ -41,8 +41,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -78,8 +76,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -106,10 +102,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -184,24 +176,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -211,8 +185,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -248,8 +220,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -276,10 +246,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -354,24 +320,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/angledLineToY.md

@@ -41,8 +41,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -78,8 +76,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -106,10 +102,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -184,24 +176,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -211,8 +185,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -248,8 +220,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -276,10 +246,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -354,24 +320,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/arc.md

@@ -52,8 +52,6 @@ const exampleSketch = startSketchOn('XZ')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -89,8 +87,6 @@ const exampleSketch = startSketchOn('XZ')
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -117,10 +113,6 @@ const exampleSketch = startSketchOn('XZ')
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -195,24 +187,6 @@ const exampleSketch = startSketchOn('XZ')
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -222,8 +196,6 @@ const exampleSketch = startSketchOn('XZ')
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -259,8 +231,6 @@ const exampleSketch = startSketchOn('XZ')
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -287,10 +257,6 @@ const exampleSketch = startSketchOn('XZ')
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -365,24 +331,6 @@ const exampleSketch = startSketchOn('XZ')
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/bezierCurve.md

@@ -47,8 +47,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -84,8 +82,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -112,10 +108,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -190,24 +182,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -217,8 +191,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -254,8 +226,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -282,10 +252,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -360,24 +326,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/chamfer.md

@@ -18,7 +18,7 @@ chamfer(data: ChamferData, extrude_group: ExtrudeGroup) -> ExtrudeGroup
 const width = 20
 const length = 10
 const thickness = 1
-const chamferRadius = 2
+const chamferLength = 2
 
 const mountingPlateSketch = startSketchOn("XY")
   |> startProfileAt([-width / 2, -length / 2], %)
@@ -29,7 +29,7 @@ const mountingPlateSketch = startSketchOn("XY")
 
 const mountingPlate = extrude(thickness, mountingPlateSketch)
   |> chamfer({
-       radius: chamferRadius,
+       length: chamferLength,
        tags: [
          getNextAdjacentEdge('edge1', %),
          getNextAdjacentEdge('edge2', %),
@@ -46,8 +46,8 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 * `data`: `ChamferData` - Data for chamfers. (REQUIRED)
 ```js
 {
-	// The radius of the chamfer.
-	radius: number,
+	// The length of the chamfer.
+	length: number,
 	// The tags of the paths you want to chamfer.
 	tags: [uuid |
 string],
@@ -62,10 +62,6 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -141,10 +137,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -156,10 +148,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",
@@ -196,10 +184,6 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -275,10 +259,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -290,10 +270,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/circle.md

@@ -76,8 +76,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -105,8 +103,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -142,8 +138,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -170,10 +164,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -248,24 +238,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 
@@ -274,8 +246,6 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -311,8 +281,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -339,10 +307,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -417,24 +381,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/close.md

@@ -42,8 +42,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -79,8 +77,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -107,10 +103,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -185,24 +177,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -212,8 +186,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -249,8 +221,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -277,10 +247,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -355,24 +321,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/extrude.md

@@ -67,8 +67,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group_set`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -104,8 +102,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -132,10 +128,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -211,24 +203,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 } |
 {
 	type: "sketchGroups",
@@ -246,10 +220,6 @@ const example = extrude(10, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -326,10 +296,6 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -341,10 +307,6 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/fillet.md

@@ -62,10 +62,6 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -141,10 +137,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -156,10 +148,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",
@@ -196,10 +184,6 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -275,10 +259,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -290,10 +270,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/getEdge.md

@@ -49,10 +49,6 @@ const revolution = startSketchOn(box, "revolveAxis")
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -128,10 +124,6 @@ const revolution = startSketchOn(box, "revolveAxis")
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -143,10 +135,6 @@ const revolution = startSketchOn(box, "revolveAxis")
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/getNextAdjacentEdge.md

@@ -47,10 +47,6 @@ const example = extrude(5, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -126,10 +122,6 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -141,10 +133,6 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/getOppositeEdge.md

@@ -45,10 +45,6 @@ const example = extrude(5, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -124,10 +120,6 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -139,10 +131,6 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/getPreviousAdjacentEdge.md

@@ -47,10 +47,6 @@ const example = extrude(5, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -126,10 +122,6 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -141,10 +133,6 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/helix.md

@@ -52,10 +52,6 @@ const part001 = startSketchOn('XY')
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -131,10 +127,6 @@ const part001 = startSketchOn('XY')
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -146,10 +138,6 @@ const part001 = startSketchOn('XY')
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",
@@ -186,10 +174,6 @@ const part001 = startSketchOn('XY')
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -265,10 +249,6 @@ const part001 = startSketchOn('XY')
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -280,10 +260,6 @@ const part001 = startSketchOn('XY')
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/hole.md

@@ -53,8 +53,6 @@ const example = extrude(1, exampleSketch)
 * `hole_sketch_group`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -90,8 +88,6 @@ const example = extrude(1, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -118,10 +114,6 @@ const example = extrude(1, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -197,24 +189,6 @@ const example = extrude(1, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 } |
 {
 	type: "sketchGroups",
@@ -223,8 +197,6 @@ const example = extrude(1, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -260,8 +232,6 @@ const example = extrude(1, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -288,10 +258,6 @@ const example = extrude(1, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -366,24 +332,6 @@ const example = extrude(1, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 
@@ -392,8 +340,6 @@ const example = extrude(1, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -429,8 +375,6 @@ const example = extrude(1, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -457,10 +401,6 @@ const example = extrude(1, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -535,24 +475,6 @@ const example = extrude(1, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/lastSegX.md

@@ -33,8 +33,6 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -70,8 +68,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -98,10 +94,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -176,24 +168,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/lastSegY.md

@@ -33,8 +33,6 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -70,8 +68,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -98,10 +94,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -176,24 +168,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/line.md

@@ -46,8 +46,6 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -83,8 +81,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -111,10 +107,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -189,24 +181,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -216,8 +190,6 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -253,8 +225,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -281,10 +251,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -359,24 +325,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/lineTo.md

@@ -33,8 +33,6 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -70,8 +68,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -98,10 +94,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -176,24 +168,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -203,8 +177,6 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -240,8 +212,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -268,10 +238,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -346,24 +312,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/patternCircular2d.md

@@ -51,8 +51,6 @@ const example = extrude(1, exampleSketch)
 * `sketch_group_set`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -88,8 +86,6 @@ const example = extrude(1, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -116,10 +112,6 @@ const example = extrude(1, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -195,24 +187,6 @@ const example = extrude(1, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 } |
 {
 	type: "sketchGroups",

docs/kcl/patternCircular3d.md

@@ -56,10 +56,6 @@ const example = extrude(-5, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -136,10 +132,6 @@ const example = extrude(-5, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -151,10 +143,6 @@ const example = extrude(-5, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/patternLinear2d.md

@@ -44,8 +44,6 @@ const example = extrude(1, exampleSketch)
 * `sketch_group_set`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -81,8 +79,6 @@ const example = extrude(1, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -109,10 +105,6 @@ const example = extrude(1, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -188,24 +180,6 @@ const example = extrude(1, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 } |
 {
 	type: "sketchGroups",

docs/kcl/patternLinear3d.md

@@ -54,10 +54,6 @@ const example = extrude(1, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -134,10 +130,6 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -149,10 +141,6 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/profileStart.md

@@ -34,8 +34,6 @@ const sketch001 = startSketchOn('XY')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -71,8 +69,6 @@ const sketch001 = startSketchOn('XY')
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -99,10 +95,6 @@ const sketch001 = startSketchOn('XY')
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -177,24 +169,6 @@ const sketch001 = startSketchOn('XY')
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/profileStartX.md

@@ -29,8 +29,6 @@ const sketch001 = startSketchOn('XY')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -66,8 +64,6 @@ const sketch001 = startSketchOn('XY')
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -94,10 +90,6 @@ const sketch001 = startSketchOn('XY')
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -172,24 +164,6 @@ const sketch001 = startSketchOn('XY')
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/profileStartY.md

@@ -28,8 +28,6 @@ const sketch001 = startSketchOn('XY')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -65,8 +63,6 @@ const sketch001 = startSketchOn('XY')
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -93,10 +89,6 @@ const sketch001 = startSketchOn('XY')
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -171,24 +163,6 @@ const sketch001 = startSketchOn('XY')
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/revolve.md

@@ -162,8 +162,6 @@ string,
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -199,8 +197,6 @@ string,
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -227,10 +223,6 @@ string,
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -305,24 +297,6 @@ string,
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 
@@ -337,10 +311,6 @@ string,
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -416,10 +386,6 @@ string,
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -431,10 +397,6 @@ string,
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/segAng.md

@@ -36,8 +36,6 @@ const example = extrude(4, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -73,8 +71,6 @@ const example = extrude(4, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -101,10 +97,6 @@ const example = extrude(4, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -179,24 +171,6 @@ const example = extrude(4, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/segEndX.md

@@ -34,8 +34,6 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -71,8 +69,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -99,10 +95,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -177,24 +169,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/segEndY.md

@@ -35,8 +35,6 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -72,8 +70,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -100,10 +96,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -178,24 +170,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/segLen.md

@@ -36,8 +36,6 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -73,8 +71,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -101,10 +97,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -179,24 +171,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/shell.md

@@ -50,10 +50,6 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -129,10 +125,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -144,10 +136,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",
@@ -184,10 +172,6 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -263,10 +247,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -278,10 +258,6 @@ string],
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",

docs/kcl/startProfileAt.md

@@ -90,8 +90,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -126,8 +124,6 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -163,8 +159,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -191,10 +185,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -269,24 +259,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/startSketchAt.md

@@ -59,8 +59,6 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -96,8 +94,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -124,10 +120,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -202,24 +194,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/startSketchOn.md

@@ -167,10 +167,6 @@ const a1 = startSketchOn({
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The position of the extrude group.
-	position: [number, number, number],
-	// The rotation of the extrude group.
-	rotation: [number, number, number, number],
 	// The sketch group paths.
 	sketchGroupValues: [{
 	// The from point.
@@ -246,10 +242,6 @@ const a1 = startSketchOn({
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudePlane",
@@ -261,10 +253,6 @@ const a1 = startSketchOn({
 	id: uuid,
 	// The name.
 	name: string,
-	// The position.
-	position: [number, number, number],
-	// The rotation.
-	rotation: [number, number, number, number],
 	// The source range.
 	sourceRange: [number, number],
 	type: "extrudeArc",
@@ -331,8 +319,6 @@ string
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.

docs/kcl/tangentialArc.md

@@ -42,8 +42,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -79,8 +77,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -107,10 +103,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -185,24 +177,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -212,8 +186,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -249,8 +221,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -277,10 +247,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -355,24 +321,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/tangentialArcTo.md

@@ -33,8 +33,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -70,8 +68,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -98,10 +94,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -176,24 +168,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -203,8 +177,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -240,8 +212,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -268,10 +238,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -346,24 +312,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/xLine.md

@@ -36,8 +36,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -73,8 +71,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -101,10 +97,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -179,24 +171,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -206,8 +180,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -243,8 +215,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -271,10 +241,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -349,24 +315,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/xLineTo.md

@@ -36,8 +36,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -73,8 +71,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -101,10 +97,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -179,24 +171,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -206,8 +180,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -243,8 +215,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -271,10 +241,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -349,24 +315,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/yLine.md

@@ -34,8 +34,6 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -71,8 +69,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -99,10 +95,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -177,24 +169,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -204,8 +178,6 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -241,8 +213,6 @@ const example = extrude(10, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -269,10 +239,6 @@ const example = extrude(10, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -347,24 +313,6 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/yLineTo.md

@@ -32,8 +32,6 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -69,8 +67,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -97,10 +93,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -175,24 +167,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `String` (OPTIONAL)
@@ -202,8 +176,6 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The plane id or face id of the sketch group.
-	entityId: uuid,
 	// The id of the sketch group.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
@@ -239,8 +211,6 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// the face id the sketch is on
-	faceId: uuid,
 	// The id of the face.
 	id: uuid,
 	// The original sketch group id of the object we are sketching on.
@@ -267,10 +237,6 @@ const example = extrude(5, exampleSketch)
 	z: number,
 },
 },
-	// The position of the sketch group.
-	position: [number, number, number],
-	// The rotation of the sketch group base plane.
-	rotation: [number, number, number, number],
 	// The starting path.
 	start: {
 	// The from point.
@@ -345,24 +311,6 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
-	// The x-axis of the sketch group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the sketch group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the sketch group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

e2e/playwright/flow-tests.spec.ts

@@ -18,12 +18,16 @@ import {
   TEST_SETTINGS_ONBOARDING_EXPORT,
   TEST_SETTINGS_ONBOARDING_START,
   TEST_CODE_GIZMO,
+  TEST_SETTINGS_ONBOARDING_USER_MENU,
+  TEST_SETTINGS_ONBOARDING_PARAMETRIC_MODELING,
 } from './storageStates'
 import * as TOML from '@iarna/toml'
 import { LineInputsType } from 'lang/std/sketchcombos'
 import { Coords2d } from 'lang/std/sketch'
 import { KCL_DEFAULT_LENGTH } from 'lib/constants'
 import { EngineCommand } from 'lang/std/engineConnection'
+import { onboardingPaths } from 'routes/Onboarding/paths'
+import { bracket } from 'lib/exampleKcl'
 
 /*
 debug helper: unfortunately we do rely on exact coord mouse clicks in a few places
@@ -594,6 +598,41 @@ test('if you write kcl with lint errors you get lints', async ({ page }) => {
   await expect(page.locator('.cm-lint-marker-info')).not.toBeVisible()
 })
 
+test('if you fixup kcl errors you clear lints', async ({ page }) => {
+  const u = await getUtils(page)
+  await page.addInitScript(async () => {
+    localStorage.setItem(
+      'persistCode',
+      `const sketch001 = startSketchOn('XZ')
+|> startProfileAt([3.29, 7.86], %)
+|> line([2.48, 2.44], %)
+|> line([2.66, 1.17], %)
+|> close(%)
+`
+    )
+  })
+
+  await page.setViewportSize({ width: 1000, height: 500 })
+  await page.goto('/')
+
+  await u.waitForAuthSkipAppStart()
+
+  // check no error to begin with
+  await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
+
+  await u.codeLocator.click()
+
+  await page.getByText(' |> line([2.48, 2.44], %)').click()
+
+  await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
+  await page.keyboard.press('End')
+  await page.keyboard.press('Backspace')
+
+  await expect(page.locator('.cm-lint-marker-error')).toBeVisible()
+  await page.keyboard.type(')')
+  await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
+})
+
 test('if you write invalid kcl you get inlined errors', async ({ page }) => {
   const u = await getUtils(page)
   await page.setViewportSize({ width: 1000, height: 500 })
@@ -951,6 +990,59 @@ test.describe('Can create sketches on all planes and their back sides', () => {
   })
 })
 
+test('Position _ Is Out Of Range... regression test', async ({ page }) => {
+  const u = await getUtils(page)
+  // const PUR = 400 / 37.5 //pixeltoUnitRatio
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.addInitScript(async () => {
+    localStorage.setItem(
+      'persistCode',
+      `const exampleSketch = startSketchOn("XZ")
+  |> startProfileAt([0, 0], %)
+  |> angledLine({ angle: 50, length: 45 }, %)
+  |> yLineTo(0, %)
+  |> close(%)
+  |>
+
+const example = extrude(5, exampleSketch)
+shell({ faces: ['end'], thickness: 0.25 }, exampleSketch)`
+    )
+  })
+  const lspStartPromise = page.waitForEvent('console', async (message) => {
+    // it would be better to wait for a message that the kcl lsp has started by looking for the message  message.text().includes('[lsp] [window/logMessage]')
+    // but that doesn't seem to make it to the console for macos/safari :(
+    if (message.text().includes('start kcl lsp')) {
+      await new Promise((resolve) => setTimeout(resolve, 200))
+      return true
+    }
+    return false
+  })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await lspStartPromise
+
+  // error in guter
+  await expect(page.locator('.cm-lint-marker-error')).toBeVisible()
+
+  // error text on hover
+  await page.hover('.cm-lint-marker-error')
+  await expect(page.getByText('Unexpected token').first()).toBeVisible()
+
+  // Okay execution finished, let's start editing text below the error.
+  await u.codeLocator.click()
+  // Go to the end of the editor
+  await page.keyboard.press('End')
+
+  // Get to the area where we want to type.
+  for (let i = 0; i < 20; i++) {
+    await page.keyboard.press('ArrowLeft')
+  }
+
+  await page.keyboard.press('Enter')
+  await page.keyboard.type('thing: "blah"', { delay: 100 })
+  await page.keyboard.press('Enter')
+})
+
 test('Auto complete works', async ({ page }) => {
   const u = await getUtils(page)
   // const PUR = 400 / 37.5 //pixeltoUnitRatio
@@ -1252,87 +1344,214 @@ test('Keyboard shortcuts can be viewed through the help menu', async ({
   ).toBeAttached()
 })
 
-test('Click through each onboarding step', async ({ page }) => {
-  const u = await getUtils(page)
+test.describe('Onboarding tests', () => {
+  test('Onboarding code is shown in the editor', async ({ page }) => {
+    const u = await getUtils(page)
 
-  // Override beforeEach test setup
-  await page.addInitScript(
-    async ({ settingsKey, settings }) => {
-      // Give no initial code, so that the onboarding start is shown immediately
-      localStorage.setItem('persistCode', '')
-      localStorage.setItem(settingsKey, settings)
-    },
-    {
-      settingsKey: TEST_SETTINGS_KEY,
-      settings: TOML.stringify({ settings: TEST_SETTINGS_ONBOARDING_START }),
+    // Override beforeEach test setup
+    await page.addInitScript(
+      async ({ settingsKey }) => {
+        // Give no initial code, so that the onboarding start is shown immediately
+        localStorage.removeItem('persistCode')
+        localStorage.removeItem(settingsKey)
+      },
+      { settingsKey: TEST_SETTINGS_KEY }
+    )
+
+    await page.setViewportSize({ width: 1200, height: 500 })
+    await page.goto('/')
+    await u.waitForAuthSkipAppStart()
+
+    // Test that the onboarding pane loaded
+    await expect(page.getByText('Welcome to Modeling App! This')).toBeVisible()
+
+    // *and* that the code is shown in the editor
+    await expect(page.locator('.cm-content')).toContainText('// Shelf Bracket')
+  })
+
+  test('Click through each onboarding step', async ({ page }) => {
+    const u = await getUtils(page)
+
+    // Override beforeEach test setup
+    await page.addInitScript(
+      async ({ settingsKey, settings }) => {
+        // Give no initial code, so that the onboarding start is shown immediately
+        localStorage.setItem('persistCode', '')
+        localStorage.setItem(settingsKey, settings)
+      },
+      {
+        settingsKey: TEST_SETTINGS_KEY,
+        settings: TOML.stringify({ settings: TEST_SETTINGS_ONBOARDING_START }),
+      }
+    )
+
+    await page.setViewportSize({ width: 1200, height: 1080 })
+    await page.goto('/')
+    await u.waitForAuthSkipAppStart()
+
+    // Test that the onboarding pane loaded
+    await expect(page.getByText('Welcome to Modeling App! This')).toBeVisible()
+
+    const nextButton = page.getByTestId('onboarding-next')
+
+    while ((await nextButton.innerText()) !== 'Finish') {
+      await expect(nextButton).toBeVisible()
+      await nextButton.click()
     }
-  )
 
-  await page.setViewportSize({ width: 1200, height: 1080 })
-  await page.goto('/')
-  await u.waitForAuthSkipAppStart()
-
-  // Test that the onboarding pane loaded
-  await expect(page.getByText('Welcome to Modeling App! This')).toBeVisible()
-
-  const nextButton = page.getByTestId('onboarding-next')
-
-  while ((await nextButton.innerText()) !== 'Finish') {
+    // Finish the onboarding
     await expect(nextButton).toBeVisible()
     await nextButton.click()
-  }
 
-  // Finish the onboarding
-  await expect(nextButton).toBeVisible()
-  await nextButton.click()
+    // Test that the onboarding pane is gone
+    await expect(page.getByTestId('onboarding-content')).not.toBeVisible()
+    await expect(page.url()).not.toContain('onboarding')
+  })
 
-  // Test that the onboarding pane is gone
-  await expect(page.getByTestId('onboarding-content')).not.toBeVisible()
-  await expect(page.url()).not.toContain('onboarding')
-})
+  test('Onboarding redirects and code updating', async ({ page }) => {
+    const u = await getUtils(page)
 
-test('Onboarding redirects and code updating', async ({ page }) => {
-  const u = await getUtils(page)
+    // Override beforeEach test setup
+    await page.addInitScript(
+      async ({ settingsKey, settings }) => {
+        // Give some initial code, so we can test that it's cleared
+        localStorage.setItem('persistCode', 'const sigmaAllow = 15000')
+        localStorage.setItem(settingsKey, settings)
+      },
+      {
+        settingsKey: TEST_SETTINGS_KEY,
+        settings: TOML.stringify({ settings: TEST_SETTINGS_ONBOARDING_EXPORT }),
+      }
+    )
 
-  // Override beforeEach test setup
-  await page.addInitScript(
-    async ({ settingsKey, settings }) => {
-      // Give some initial code, so we can test that it's cleared
-      localStorage.setItem('persistCode', 'const sigmaAllow = 15000')
-      localStorage.setItem(settingsKey, settings)
-    },
-    {
-      settingsKey: TEST_SETTINGS_KEY,
-      settings: TOML.stringify({ settings: TEST_SETTINGS_ONBOARDING_EXPORT }),
-    }
-  )
+    await page.setViewportSize({ width: 1200, height: 500 })
+    await page.goto('/')
+    await u.waitForAuthSkipAppStart()
 
-  await page.setViewportSize({ width: 1200, height: 500 })
-  await page.goto('/')
-  await u.waitForAuthSkipAppStart()
+    // Test that the redirect happened
+    await expect(page.url().split(':3000').slice(-1)[0]).toBe(
+      `/file/%2Fbrowser%2Fmain.kcl/onboarding/export`
+    )
 
-  // Test that the redirect happened
-  await expect(page.url().split(':3000').slice(-1)[0]).toBe(
-    `/file/%2Fbrowser%2Fmain.kcl/onboarding/export`
-  )
+    // Test that you come back to this page when you refresh
+    await page.reload()
+    await expect(page.url().split(':3000').slice(-1)[0]).toBe(
+      `/file/%2Fbrowser%2Fmain.kcl/onboarding/export`
+    )
 
-  // Test that you come back to this page when you refresh
-  await page.reload()
-  await expect(page.url().split(':3000').slice(-1)[0]).toBe(
-    `/file/%2Fbrowser%2Fmain.kcl/onboarding/export`
-  )
+    // Test that the onboarding pane loaded
+    const title = page.locator('[data-testid="onboarding-content"]')
+    await expect(title).toBeAttached()
 
-  // Test that the onboarding pane loaded
-  const title = page.locator('[data-testid="onboarding-content"]')
-  await expect(title).toBeAttached()
+    // Test that the code changes when you advance to the next step
+    await page.locator('[data-testid="onboarding-next"]').click()
+    await expect(page.locator('.cm-content')).toHaveText('')
 
-  // Test that the code changes when you advance to the next step
-  await page.locator('[data-testid="onboarding-next"]').click()
-  await expect(page.locator('.cm-content')).toHaveText('')
+    // Test that the code is not empty when you click on the next step
+    await page.locator('[data-testid="onboarding-next"]').click()
+    await expect(page.locator('.cm-content')).toHaveText(/.+/)
+  })
 
-  // Test that the code is not empty when you click on the next step
-  await page.locator('[data-testid="onboarding-next"]').click()
-  await expect(page.locator('.cm-content')).toHaveText(/.+/)
+  test('Onboarding code gets reset to demo on Interactive Numbers step', async ({
+    page,
+  }) => {
+    test.skip(
+      process.platform === 'darwin',
+      "Skip on macOS, because Playwright isn't behaving the same as the actual browser"
+    )
+    const u = await getUtils(page)
+    const badCode = `// This is bad code we shouldn't see`
+    // Override beforeEach test setup
+    await page.addInitScript(
+      async ({ settingsKey, settings, badCode }) => {
+        localStorage.setItem('persistCode', badCode)
+        localStorage.setItem(settingsKey, settings)
+      },
+      {
+        settingsKey: TEST_SETTINGS_KEY,
+        settings: TOML.stringify({
+          settings: TEST_SETTINGS_ONBOARDING_PARAMETRIC_MODELING,
+        }),
+        badCode,
+      }
+    )
+
+    await page.setViewportSize({ width: 1200, height: 1080 })
+    await page.goto('/')
+    await page.waitForURL('**' + onboardingPaths.PARAMETRIC_MODELING, {
+      waitUntil: 'domcontentloaded',
+    })
+
+    const bracketNoNewLines = bracket.replace(/\n/g, '')
+
+    // Check the code got reset on load
+    await expect(page.locator('#code-pane')).toBeVisible()
+    await expect(u.codeLocator).toHaveText(bracketNoNewLines, {
+      timeout: 10_000,
+    })
+
+    // Mess with the code again
+    await u.codeLocator.selectText()
+    await u.codeLocator.fill(badCode)
+    await expect(u.codeLocator).toHaveText(badCode)
+
+    // Click to the next step
+    await page.locator('[data-testid="onboarding-next"]').click()
+    await page.waitForURL('**' + onboardingPaths.INTERACTIVE_NUMBERS, {
+      waitUntil: 'domcontentloaded',
+    })
+
+    // Check that the code has been reset
+    await expect(u.codeLocator).toHaveText(bracketNoNewLines)
+  })
+
+  test('Avatar text updates depending on image load success', async ({
+    page,
+  }) => {
+    // Override beforeEach test setup
+    await page.addInitScript(
+      async ({ settingsKey, settings }) => {
+        localStorage.setItem(settingsKey, settings)
+      },
+      {
+        settingsKey: TEST_SETTINGS_KEY,
+        settings: TOML.stringify({
+          settings: TEST_SETTINGS_ONBOARDING_USER_MENU,
+        }),
+      }
+    )
+
+    await page.setViewportSize({ width: 1200, height: 1080 })
+    await page.goto('/')
+    await page.waitForURL('**/file/**', { waitUntil: 'domcontentloaded' })
+
+    // Test that the text in this step is correct
+    const avatarLocator = page.getByTestId('user-sidebar-toggle').locator('img')
+    const onboardingOverlayLocator = page
+      .getByTestId('onboarding-content')
+      .locator('div')
+      .nth(1)
+
+    // Expect the avatar to be visible and for the text to reference it
+    await expect(avatarLocator).toBeVisible()
+    await expect(onboardingOverlayLocator).toBeVisible()
+    await expect(onboardingOverlayLocator).toContainText('your avatar')
+
+    await page.route('https://lh3.googleusercontent.com/**', async (route) => {
+      await route.fulfill({
+        status: 404,
+        contentType: 'text/plain',
+        body: 'Not Found!',
+      })
+    })
+
+    await page.reload({ waitUntil: 'domcontentloaded' })
+
+    // Now expect the text to be different
+    await expect(avatarLocator).not.toBeVisible()
+    await expect(onboardingOverlayLocator).toBeVisible()
+    await expect(onboardingOverlayLocator).toContainText('the menu button')
+  })
 })
 
 test.describe('Testing selections', () => {
@@ -1632,6 +1851,74 @@ test.describe('Testing selections', () => {
     await page.waitForTimeout(100)
     await expect(page.getByTestId('hover-highlight')).not.toBeVisible()
   })
+  test("Extrude button should be disabled if there's no extrudable geometry when nothing is selected", async ({
+    page,
+  }) => {
+    const u = await getUtils(page)
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'persistCode',
+        `const sketch001 = startSketchOn('XZ')
+  |> startProfileAt([3.29, 7.86], %)
+  |> line([2.48, 2.44], %)
+  |> line([2.66, 1.17], %)
+  |> line([3.75, 0.46], %)
+  |> line([4.99, -0.46], %, 'seg01')
+  |> line([3.3, -2.12], %)
+  |> line([2.16, -3.33], %)
+  |> line([0.85, -3.08], %)
+  |> line([-0.18, -3.36], %)
+  |> line([-3.86, -2.73], %)
+  |> line([-17.67, 0.85], %)
+  |> close(%)
+const extrude001 = extrude(10, sketch001)
+  `
+      )
+    })
+    await page.setViewportSize({ width: 1000, height: 500 })
+    await page.goto('/')
+    await u.waitForAuthSkipAppStart()
+
+    // wait for execution done
+    await u.openDebugPanel()
+    await u.expectCmdLog('[data-message-type="execution-done"]')
+    await u.closeDebugPanel()
+
+    const selectUnExtrudable = () =>
+      page.getByText(`line([4.99, -0.46], %, 'seg01')`).click()
+    const clickEmpty = () => page.mouse.click(700, 460)
+    await selectUnExtrudable()
+    // expect extrude button to be disabled
+    await expect(page.getByRole('button', { name: 'Extrude' })).toBeDisabled()
+
+    await clickEmpty()
+
+    // expect active line to contain nothing
+    await expect(page.locator('.cm-activeLine')).toHaveText('')
+    // and extrude to still be disabled
+    await expect(page.getByRole('button', { name: 'Extrude' })).toBeDisabled()
+
+    const codeToAdd = `${await u.codeLocator.allInnerTexts()}
+const sketch002 = startSketchOn(extrude001, 'seg01')
+  |> startProfileAt([-12.94, 6.6], %)
+  |> line([2.45, -0.2], %)
+  |> line([-2, -1.25], %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
+`
+    await u.codeLocator.fill(codeToAdd)
+
+    await selectUnExtrudable()
+    // expect extrude button to be disabled
+    await expect(page.getByRole('button', { name: 'Extrude' })).toBeDisabled()
+
+    await clickEmpty()
+    await expect(page.locator('.cm-activeLine')).toHaveText('')
+    // there's not extrudable geometry, so button should be enabled
+    await expect(
+      page.getByRole('button', { name: 'Extrude' })
+    ).not.toBeDisabled()
+  })
 
   test('Testing selections (and hovers) work on sketches when NOT in sketch mode', async ({
     page,

e2e/playwright/storageStates.ts

@@ -1,5 +1,6 @@
 import { SaveSettingsPayload } from 'lib/settings/settingsTypes'
 import { Themes } from 'lib/theme'
+import { onboardingPaths } from 'routes/Onboarding/paths'
 
 export const TEST_SETTINGS_KEY = '/settings.toml'
 export const TEST_SETTINGS = {
@@ -22,9 +23,22 @@ export const TEST_SETTINGS = {
   },
 } satisfies Partial<SaveSettingsPayload>
 
+export const TEST_SETTINGS_ONBOARDING_USER_MENU = {
+  ...TEST_SETTINGS,
+  app: { ...TEST_SETTINGS.app, onboardingStatus: onboardingPaths.USER_MENU },
+} satisfies Partial<SaveSettingsPayload>
+
 export const TEST_SETTINGS_ONBOARDING_EXPORT = {
   ...TEST_SETTINGS,
-  app: { ...TEST_SETTINGS.app, onboardingStatus: '/export' },
+  app: { ...TEST_SETTINGS.app, onboardingStatus: onboardingPaths.EXPORT },
+} satisfies Partial<SaveSettingsPayload>
+
+export const TEST_SETTINGS_ONBOARDING_PARAMETRIC_MODELING = {
+  ...TEST_SETTINGS,
+  app: {
+    ...TEST_SETTINGS.app,
+    onboardingStatus: onboardingPaths.PARAMETRIC_MODELING,
+  },
 } satisfies Partial<SaveSettingsPayload>
 
 export const TEST_SETTINGS_ONBOARDING_START = {

e2e/tauri/specs/app.spec.ts

@@ -2,6 +2,7 @@ import { browser, $, expect } from '@wdio/globals'
 import fs from 'fs/promises'
 import path from 'path'
 import os from 'os'
+import { click, setDatasetValue } from '../utils'
 
 const isWin32 = os.platform() === 'win32'
 const documentsDir = path.join(os.homedir(), 'Documents')
@@ -15,25 +16,8 @@ const newProjectDir = path.join(documentsDir, 'a-different-directory')
 const tmp = process.env.TEMP || '/tmp'
 const userCodeDir = path.join(tmp, 'kittycad_user_code')
 
-async function click(element: WebdriverIO.Element): Promise<void> {
-  // Workaround for .click(), see https://github.com/tauri-apps/tauri/issues/6541
-  await element.waitForClickable()
-  await browser.execute('arguments[0].click();', element)
-}
-
-/* Shoutout to @Sheap on Github for a great workaround utility:
- * https://github.com/tauri-apps/tauri/issues/6541#issue-1638944060
- */
-async function setDatasetValue(
-  field: WebdriverIO.Element,
-  property: string,
-  value: string
-) {
-  await browser.execute(`arguments[0].dataset.${property} = "${value}"`, field)
-}
-
-describe('ZMA (Tauri)', () => {
-  it('opens the auth page and signs in', async () => {
+describe('ZMA sign in flow', () => {
+  before(async () => {
     // Clean up filesystem from previous tests
     await new Promise((resolve) => setTimeout(resolve, 100))
     await fs.rm(defaultProjectDir, { force: true, recursive: true })
@@ -42,7 +26,9 @@ describe('ZMA (Tauri)', () => {
     await fs.rm(userSettingsDir, { force: true, recursive: true })
     await fs.mkdir(defaultProjectDir, { recursive: true })
     await fs.mkdir(newProjectDir, { recursive: true })
+  })
 
+  it('opens the auth page and signs in', async () => {
     const signInButton = await $('[data-testid="sign-in-button"]')
     expect(await signInButton.getText()).toEqual('Sign in')
 
@@ -82,6 +68,10 @@ describe('ZMA (Tauri)', () => {
     const newFileButton = await $('[data-testid="home-new-file"]')
     expect(await newFileButton.getText()).toEqual('New project')
   })
+})
+
+describe('ZMA authorized user flows', () => {
+  // Note: each flow below is intended to start *and* end from the home page
 
   it('opens the settings page, checks filesystem settings, and closes the settings page', async () => {
     const menuButton = await $('[data-testid="user-sidebar-toggle"]')
@@ -150,7 +140,9 @@ describe('ZMA (Tauri)', () => {
     const base = isWin32 ? 'http://tauri.localhost' : 'tauri://localhost'
     await browser.execute(`window.location.href = "${base}/home"`)
   })
+})
 
+describe('ZMA sign out flow', () => {
   it('signs out', async () => {
     await new Promise((resolve) => setTimeout(resolve, 1000))
     const menuButton = await $('[data-testid="user-sidebar-toggle"]')

e2e/tauri/utils.ts

@@ -0,0 +1,18 @@
+import { browser } from '@wdio/globals'
+
+export async function click(element: WebdriverIO.Element): Promise<void> {
+  // Workaround for .click(), see https://github.com/tauri-apps/tauri/issues/6541
+  await element.waitForClickable()
+  await browser.execute('arguments[0].click();', element)
+}
+
+/* Shoutout to @Sheap on Github for a great workaround utility:
+ * https://github.com/tauri-apps/tauri/issues/6541#issue-1638944060
+ */
+export async function setDatasetValue(
+  field: WebdriverIO.Element,
+  property: string,
+  value: string
+) {
+  await browser.execute(`arguments[0].dataset.${property} = "${value}"`, field)
+}

package.json

@@ -1,6 +1,6 @@
 {
   "name": "untitled-app",
-  "version": "0.22.2",
+  "version": "0.22.4",
   "private": true,
   "dependencies": {
     "@codemirror/autocomplete": "^6.16.0",

src-tauri/Cargo.lock

@@ -2358,124 +2358,6 @@ dependencies = [
  "png",
 ]
 
-[[package]]
-name = "icu_collections"
-version = "1.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "db2fa452206ebee18c4b5c2274dbf1de17008e874b4dc4f0aea9d01ca79e4526"
-dependencies = [
- "displaydoc",
- "yoke",
- "zerofrom",
- "zerovec",
-]
-
-[[package]]
-name = "icu_locid"
-version = "1.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "13acbb8371917fc971be86fc8057c41a64b521c184808a698c02acc242dbf637"
-dependencies = [
- "displaydoc",
- "litemap",
- "tinystr",
- "writeable",
- "zerovec",
-]
-
-[[package]]
-name = "icu_locid_transform"
-version = "1.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "01d11ac35de8e40fdeda00d9e1e9d92525f3f9d887cdd7aa81d727596788b54e"
-dependencies = [
- "displaydoc",
- "icu_locid",
- "icu_locid_transform_data",
- "icu_provider",
- "tinystr",
- "zerovec",
-]
-
-[[package]]
-name = "icu_locid_transform_data"
-version = "1.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "fdc8ff3388f852bede6b579ad4e978ab004f139284d7b28715f773507b946f6e"
-
-[[package]]
-name = "icu_normalizer"
-version = "1.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "19ce3e0da2ec68599d193c93d088142efd7f9c5d6fc9b803774855747dc6a84f"
-dependencies = [
- "displaydoc",
- "icu_collections",
- "icu_normalizer_data",
- "icu_properties",
- "icu_provider",
- "smallvec",
- "utf16_iter",
- "utf8_iter",
- "write16",
- "zerovec",
-]
-
-[[package]]
-name = "icu_normalizer_data"
-version = "1.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f8cafbf7aa791e9b22bec55a167906f9e1215fd475cd22adfcf660e03e989516"
-
-[[package]]
-name = "icu_properties"
-version = "1.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1f8ac670d7422d7f76b32e17a5db556510825b29ec9154f235977c9caba61036"
-dependencies = [
- "displaydoc",
- "icu_collections",
- "icu_locid_transform",
- "icu_properties_data",
- "icu_provider",
- "tinystr",
- "zerovec",
-]
-
-[[package]]
-name = "icu_properties_data"
-version = "1.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "67a8effbc3dd3e4ba1afa8ad918d5684b8868b3b26500753effea8d2eed19569"
-
-[[package]]
-name = "icu_provider"
-version = "1.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6ed421c8a8ef78d3e2dbc98a973be2f3770cb42b606e3ab18d6237c4dfde68d9"
-dependencies = [
- "displaydoc",
- "icu_locid",
- "icu_provider_macros",
- "stable_deref_trait",
- "tinystr",
- "writeable",
- "yoke",
- "zerofrom",
- "zerovec",
-]
-
-[[package]]
-name = "icu_provider_macros"
-version = "1.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1ec89e9337638ecdc08744df490b221a7399bf8d164eb52a665454e60e075ad6"
-dependencies = [
- "proc-macro2",
- "quote",
- "syn 2.0.66",
-]
-
 [[package]]
 name = "ident_case"
 version = "1.0.1"
@@ -2502,18 +2384,6 @@ dependencies = [
  "unicode-normalization",
 ]
 
-[[package]]
-name = "idna"
-version = "1.0.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4716a3a0933a1d01c2f72450e89596eb51dd34ef3c211ccd875acdf1f8fe47ed"
-dependencies = [
- "icu_normalizer",
- "icu_properties",
- "smallvec",
- "utf8_iter",
-]
-
 [[package]]
 name = "indexmap"
 version = "1.9.3"
@@ -2888,12 +2758,6 @@ version = "0.4.14"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "78b3ae25bc7c8c38cec158d1f2757ee79e9b3740fbc7ccf0e59e4b08d793fa89"
 
-[[package]]
-name = "litemap"
-version = "0.7.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "643cb0b8d4fcc284004d5fd0d67ccf61dfffadb7f75e1e71bc420f4688a3a704"
-
 [[package]]
 name = "lock_api"
 version = "0.4.12"
@@ -5953,16 +5817,6 @@ dependencies = [
  "crunchy",
 ]
 
-[[package]]
-name = "tinystr"
-version = "0.7.6"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9117f5d4db391c1cf6927e7bea3db74b9a1c1add8f7eda9ffd5364f40f57b82f"
-dependencies = [
- "displaydoc",
- "zerovec",
-]
-
 [[package]]
 name = "tinyvec"
 version = "1.6.0"
@@ -6322,10 +6176,12 @@ checksum = "e421abadd41a4225275504ea4d6566923418b7f05506fbc9c0fe86ba7396114b"
 
 [[package]]
 name = "ts-rs"
-version = "8.1.0"
-source = "git+https://github.com/Aleph-Alpha/ts-rs#be0349d5fb07a8ccab713887a61e90e3bc773c7a"
+version = "9.0.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "5e2dcf58e612adda9a83800731e8e4aba04d8a302b9029617b0b6e4b021d5357"
 dependencies = [
  "chrono",
+ "serde_json",
  "thiserror",
  "ts-rs-macros",
  "url",
@@ -6334,8 +6190,9 @@ dependencies = [
 
 [[package]]
 name = "ts-rs-macros"
-version = "8.1.0"
-source = "git+https://github.com/Aleph-Alpha/ts-rs#be0349d5fb07a8ccab713887a61e90e3bc773c7a"
+version = "9.0.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "cbdee324e50a7402416d9c25270d3df4241ed528af5d36dda18b6f219551c577"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -6471,12 +6328,12 @@ checksum = "8ecb6da28b8a351d773b68d5825ac39017e680750f980f3a1a85cd8dd28a47c1"
 
 [[package]]
 name = "url"
-version = "2.5.1"
+version = "2.5.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f7c25da092f0a868cdf09e8674cd3b7ef3a7d92a24253e663a2fb85e2496de56"
+checksum = "22784dbdf76fdde8af1aeda5622b546b422b6fc585325248a2bf9f5e41e94d6c"
 dependencies = [
  "form_urlencoded",
- "idna 1.0.0",
+ "idna 0.5.0",
  "percent-encoding",
  "serde",
 ]
@@ -6500,24 +6357,12 @@ version = "0.7.6"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "09cc8ee72d2a9becf2f2febe0205bbed8fc6615b7cb429ad062dc7b7ddd036a9"
 
-[[package]]
-name = "utf16_iter"
-version = "1.0.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c8232dd3cdaed5356e0f716d285e4b40b932ac434100fe9b7e0e8e935b9e6246"
-
 [[package]]
 name = "utf8-width"
 version = "0.1.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "86bd8d4e895da8537e5315b8254664e6b769c4ff3db18321b297a1e7004392e3"
 
-[[package]]
-name = "utf8_iter"
-version = "1.0.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b6c140620e7ffbb22c2dee59cafe6084a59b5ffc27a8859a5f0d494b5d52b6be"
-
 [[package]]
 name = "utf8parse"
 version = "0.2.2"
@@ -7272,18 +7117,6 @@ dependencies = [
  "windows-sys 0.48.0",
 ]
 
-[[package]]
-name = "write16"
-version = "1.0.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d1890f4022759daae28ed4fe62859b1236caebfc61ede2f63ed4e695f3f6d936"
-
-[[package]]
-name = "writeable"
-version = "0.5.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1e9df38ee2d2c3c5948ea468a8406ff0db0b29ae1ffde1bcf20ef305bcc95c51"
-
 [[package]]
 name = "wry"
 version = "0.40.1"
@@ -7386,30 +7219,6 @@ dependencies = [
  "linked-hash-map",
 ]
 
-[[package]]
-name = "yoke"
-version = "0.7.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6c5b1314b079b0930c31e3af543d8ee1757b1951ae1e1565ec704403a7240ca5"
-dependencies = [
- "serde",
- "stable_deref_trait",
- "yoke-derive",
- "zerofrom",
-]
-
-[[package]]
-name = "yoke-derive"
-version = "0.7.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "28cc31741b18cb6f1d5ff12f5b7523e3d6eb0852bbbad19d73905511d9849b95"
-dependencies = [
- "proc-macro2",
- "quote",
- "syn 2.0.66",
- "synstructure",
-]
-
 [[package]]
 name = "zbus"
 version = "4.3.0"
@@ -7487,55 +7296,12 @@ dependencies = [
  "syn 2.0.66",
 ]
 
-[[package]]
-name = "zerofrom"
-version = "0.1.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "91ec111ce797d0e0784a1116d0ddcdbea84322cd79e5d5ad173daeba4f93ab55"
-dependencies = [
- "zerofrom-derive",
-]
-
-[[package]]
-name = "zerofrom-derive"
-version = "0.1.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0ea7b4a3637ea8669cedf0f1fd5c286a17f3de97b8dd5a70a6c167a1730e63a5"
-dependencies = [
- "proc-macro2",
- "quote",
- "syn 2.0.66",
- "synstructure",
-]
-
 [[package]]
 name = "zeroize"
 version = "1.8.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "ced3678a2879b30306d323f4542626697a464a97c0a07c9aebf7ebca65cd4dde"
 
-[[package]]
-name = "zerovec"
-version = "0.10.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "bb2cc8827d6c0994478a15c53f374f46fbd41bea663d809b14744bc42e6b109c"
-dependencies = [
- "yoke",
- "zerofrom",
- "zerovec-derive",
-]
-
-[[package]]
-name = "zerovec-derive"
-version = "0.10.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "97cf56601ee5052b4417d90c8755c6683473c926039908196cf35d99f893ebe7"
-dependencies = [
- "proc-macro2",
- "quote",
- "syn 2.0.66",
-]
-
 [[package]]
 name = "zip"
 version = "2.1.3"

src-tauri/tauri.conf.json

@@ -75,5 +75,5 @@
     }
   },
   "productName": "Zoo Modeling App",
-  "version": "0.22.2"
+  "version": "0.22.4"
 }

src/clientSideScene/sceneEntities.ts

@@ -32,9 +32,7 @@ import {
   SKETCH_GROUP_SEGMENTS,
   SKETCH_LAYER,
   X_AXIS,
-  XZ_PLANE,
   Y_AXIS,
-  YZ_PLANE,
 } from './sceneInfra'
 import { isQuaternionVertical, quaternionFromUpNForward } from './helpers'
 import {
@@ -345,11 +343,8 @@ export class SceneEntities {
       pathToNode: sketchPathToNode,
     }
     const dummy = new Mesh()
-    dummy.position.set(
-      sketchGroup.position[0],
-      sketchGroup.position[1],
-      sketchGroup.position[2]
-    )
+    // TODO: When we actually have sketch positions and rotations we can use them here.
+    dummy.position.set(0, 0, 0)
     const orthoFactor = orthoScale(sceneInfra.camControls.camera)
     const factor =
       (sceneInfra.camControls.camera instanceof OrthographicCamera
@@ -1399,7 +1394,6 @@ export class SceneEntities {
           streamDimensions
         )
         let _entity_id = entity_id
-        console.log('things', _entity_id, rest)
         if (!_entity_id) return
         if (
           engineCommandManager.defaultPlanes?.xy === _entity_id ||
@@ -1428,7 +1422,6 @@ export class SceneEntities {
             .sub(sceneInfra.camControls.target)
 
           if (engineCommandManager.defaultPlanes?.xy === _entity_id) {
-            console.log('XY')
             zAxis = [0, 0, 1]
             yAxis = [0, 1, 0]
             if (camVector.z < 0) {
@@ -1436,7 +1429,6 @@ export class SceneEntities {
               _entity_id = engineCommandManager.defaultPlanes?.negXy || ''
             }
           } else if (engineCommandManager.defaultPlanes?.yz === _entity_id) {
-            console.log('YZ')
             zAxis = [1, 0, 0]
             yAxis = [0, 0, 1]
             if (camVector.x < 0) {
@@ -1444,7 +1436,6 @@ export class SceneEntities {
               _entity_id = engineCommandManager.defaultPlanes?.negYz || ''
             }
           } else if (engineCommandManager.defaultPlanes?.xz === _entity_id) {
-            console.log('XZ')
             zAxis = [0, 1, 0]
             yAxis = [0, 0, 1]
             _entity_id = engineCommandManager.defaultPlanes?.negXz || ''
@@ -1498,6 +1489,7 @@ export class SceneEntities {
           kclManager.ast,
           artifact.range
         )
+
         const extrudePathToNode = extrusions?.range
           ? getNodePathFromSourceRange(kclManager.ast, extrusions.range)
           : []
@@ -1806,7 +1798,7 @@ export function getSketchQuaternion(
     ast: kclManager.ast,
     programMemory: kclManager.programMemory,
   })
-  const zAxis = sketchGroup?.zAxis || sketchNormalBackUp
+  const zAxis = sketchGroup?.on.zAxis || sketchNormalBackUp
   return getQuaternionFromZAxis(massageFormats(zAxis))
 }
 export async function getSketchOrientationDetails(
@@ -1821,20 +1813,24 @@ export async function getSketchOrientationDetails(
     programMemory: kclManager.programMemory,
   })
   if (sketchGroup.on.type === 'plane') {
-    const zAxis = sketchGroup?.zAxis
+    const zAxis = sketchGroup?.on.zAxis
     return {
       quat: getQuaternionFromZAxis(massageFormats(zAxis)),
       sketchDetails: {
         sketchPathToNode,
         zAxis: [zAxis.x, zAxis.y, zAxis.z],
-        yAxis: [sketchGroup.yAxis.x, sketchGroup.yAxis.y, sketchGroup.yAxis.z],
+        yAxis: [
+          sketchGroup.on.yAxis.x,
+          sketchGroup.on.yAxis.y,
+          sketchGroup.on.yAxis.z,
+        ],
         origin: [0, 0, 0],
         faceId: sketchGroup.on.id,
       },
     }
   }
   if (sketchGroup.on.type === 'face') {
-    const faceInfo = await getFaceDetails(sketchGroup.on.faceId)
+    const faceInfo = await getFaceDetails(sketchGroup.on.id)
 
     if (!faceInfo?.origin || !faceInfo?.z_axis || !faceInfo?.y_axis)
       throw new Error('faceInfo')
@@ -1850,7 +1846,7 @@ export async function getSketchOrientationDetails(
         zAxis: [z_axis.x, z_axis.y, z_axis.z],
         yAxis: [y_axis.x, y_axis.y, y_axis.z],
         origin: [origin.x, origin.y, origin.z],
-        faceId: sketchGroup.on.faceId,
+        faceId: sketchGroup.on.id,
       },
     }
   }

src/components/ModelingMachineProvider.tsx

@@ -47,7 +47,6 @@ import {
   TANGENTIAL_ARC_TO_SEGMENT,
   getParentGroup,
   getSketchOrientationDetails,
-  getSketchQuaternion,
 } from 'clientSideScene/sceneEntities'
 import {
   moveValueIntoNewVariablePath,
@@ -64,6 +63,7 @@ import {
 import {
   getNodeFromPath,
   getNodePathFromSourceRange,
+  hasExtrudableGeometry,
   isSingleCursorInPipe,
 } from 'lang/queryAst'
 import { TEST } from 'env'
@@ -122,7 +122,24 @@ export const ModelingMachineProvider = ({
     htmlRef,
     token
   )
-  useHotkeyWrapper(['meta + shift + .'], () => coreDump(coreDumpManager, true))
+  useHotkeyWrapper(['meta + shift + .'], () => {
+    console.warn('CoreDump: Initializing core dump')
+    toast.promise(
+      coreDump(coreDumpManager, true),
+      {
+        loading: 'Starting core dump...',
+        success: 'Core dump completed successfully',
+        error: 'Error while exporting core dump',
+      },
+      {
+        success: {
+          // Note: this extended duration is especially important for Playwright e2e testing
+          // default duration is 2000 - https://react-hot-toast.com/docs/toast#default-durations
+          duration: 6000,
+        },
+      }
+    )
+  })
 
   // Settings machine setup
   // const retrievedSettings = useRef(
@@ -431,8 +448,13 @@ export const ModelingMachineProvider = ({
           if (
             selectionRanges.codeBasedSelections.length === 0 ||
             isSelectionLastLine(selectionRanges, codeManager.code)
-          )
-            return true
+          ) {
+            // they have no selection, we should enable the button
+            // so they can select the face through the cmdbar
+            // BUT only if there's extrudable geometry
+            if (hasExtrudableGeometry(kclManager.ast)) return true
+            return false
+          }
           if (!isPipe) return false
 
           return canExtrudeSelection(selectionRanges)
@@ -485,6 +507,7 @@ export const ModelingMachineProvider = ({
         },
         'animate-to-face': async (_, { data }) => {
           if (data.type === 'extrudeFace') {
+            console.log('data', data)
             const { modifiedAst, pathToNode: pathToNewSketchNode } =
               sketchOnExtrudedFace(
                 kclManager.ast,

src/components/ModelingSidebar/ModelingPane.module.css

@@ -2,7 +2,7 @@
   @apply relative z-0 rounded-r max-w-full h-full flex-1;
   display: grid;
   grid-template-rows: auto 1fr;
-  @apply bg-chalkboard-10/50 backdrop-blur-sm border border-chalkboard-20;
+  @apply bg-chalkboard-10/50 focus-within:bg-chalkboard-10/90 backdrop-blur-sm border border-chalkboard-20;
   scroll-margin-block-start: 41px;
 }
 
@@ -12,7 +12,7 @@
 }
 
 :global(.dark) .panel {
-  @apply bg-chalkboard-100/50 backdrop-blur-[3px] border-chalkboard-80;
+  @apply bg-chalkboard-100/50 focus-within:bg-chalkboard-100/90 backdrop-blur-[3px] border-chalkboard-80;
 }
 
 .header {

src/components/ModelingSidebar/ModelingPane.tsx

@@ -46,7 +46,11 @@ export const ModelingPane = ({
       data-testid={detailsTestId}
       id={id}
       className={
-        pointerEventsCssClass + styles.panel + ' group ' + (className || '')
+        'group-focus-within:border-primary dark:group-focus-within:border-chalkboard-50 ' +
+        pointerEventsCssClass +
+        styles.panel +
+        ' group ' +
+        (className || '')
       }
     >
       <ModelingPaneHeader title={title} Menu={Menu} />

src/components/ModelingSidebar/ModelingPanes/MemoryPane.test.tsx

@@ -43,20 +43,16 @@ describe('processMemory', () => {
       theExtrude: [
         {
           type: 'extrudePlane',
-          position: [0, 0, 0],
-          rotation: [0, 0, 0, 1],
-          faceId: expect.any(String),
           name: '',
           id: expect.any(String),
+          faceId: expect.any(String),
           sourceRange: [170, 194],
         },
         {
           type: 'extrudePlane',
-          position: [0, 0, 0],
-          rotation: [0, 0, 0, 1],
-          faceId: expect.any(String),
           name: '',
           id: expect.any(String),
+          faceId: expect.any(String),
           sourceRange: [202, 230],
         },
       ],

src/components/ModelingSidebar/ModelingSidebar.tsx

@@ -123,70 +123,73 @@ function ModelingSidebarSection({
   }, [showDebugPanel.current, togglePane, openPanes])
 
   return (
-    <Tab.Group
-      vertical
-      selectedIndex={
-        currentPane === 'none' ? 0 : paneIds.indexOf(currentPane) + 1
-      }
-      onChange={(index) => {
-        const newPane = index === 0 ? 'none' : paneIds[index - 1]
-        togglePane(newPane)
-      }}
-    >
-      <Tab.List
-        className={
-          'pointer-events-auto ' +
-          (alignButtons === 'start'
-            ? 'justify-start self-start'
-            : 'justify-end self-end') +
-          (currentPane === 'none'
-            ? ' rounded-r focus-within:!border-primary/50'
-            : ' border-r-0') +
-          ' p-2 col-start-1 col-span-1 h-fit w-fit flex flex-col items-start gap-2 bg-chalkboard-10 border border-solid border-chalkboard-20 dark:bg-chalkboard-90 dark:border-chalkboard-80 ' +
-          (openPanes.length === 1 && currentPane === 'none' ? 'pr-0.5' : '')
+    <div className="group contents">
+      <Tab.Group
+        vertical
+        selectedIndex={
+          currentPane === 'none' ? 0 : paneIds.indexOf(currentPane) + 1
         }
+        onChange={(index) => {
+          const newPane = index === 0 ? 'none' : paneIds[index - 1]
+          togglePane(newPane)
+        }}
       >
-        <Tab key="none" className="sr-only">
-          No panes open
-        </Tab>
-        {filteredPanes.map((pane) => (
-          <ModelingPaneButton
-            key={pane.id}
-            paneConfig={pane}
-            currentPane={currentPane}
-            togglePane={() => togglePane(pane.id)}
-          />
-        ))}
-      </Tab.List>
-      <Tab.Panels
-        as="article"
-        className={
-          'col-start-2 col-span-1 ' +
-          (openPanes.length === 1
-            ? currentPane !== 'none'
-              ? `row-start-1 row-end-3`
-              : `hidden`
-            : ``)
-        }
-      >
-        <Tab.Panel key="none" />
-        {filteredPanes.map((pane) => (
-          <Tab.Panel key={pane.id} className="h-full">
-            <ModelingPane
-              id={`${pane.id}-pane`}
-              title={pane.title}
-              Menu={pane.Menu}
-            >
-              {pane.Content instanceof Function ? (
-                <pane.Content />
-              ) : (
-                pane.Content
-              )}
-            </ModelingPane>
-          </Tab.Panel>
-        ))}
-      </Tab.Panels>
-    </Tab.Group>
+        <Tab.List
+          className={
+            'pointer-events-auto ' +
+            (alignButtons === 'start'
+              ? 'justify-start self-start'
+              : 'justify-end self-end') +
+            (currentPane === 'none'
+              ? ' rounded-r focus-within:!border-primary/50'
+              : ' border-r-0') +
+            ' p-2 col-start-1 col-span-1 h-fit w-fit flex flex-col items-start gap-2 ' +
+            'bg-chalkboard-10 border border-solid border-chalkboard-20 dark:bg-chalkboard-90 dark:border-chalkboard-80 group-focus-within:border-primary dark:group-focus-within:border-chalkboard-50 ' +
+            (openPanes.length === 1 && currentPane === 'none' ? 'pr-0.5' : '')
+          }
+        >
+          <Tab key="none" className="sr-only">
+            No panes open
+          </Tab>
+          {filteredPanes.map((pane) => (
+            <ModelingPaneButton
+              key={pane.id}
+              paneConfig={pane}
+              currentPane={currentPane}
+              togglePane={() => togglePane(pane.id)}
+            />
+          ))}
+        </Tab.List>
+        <Tab.Panels
+          as="article"
+          className={
+            'col-start-2 col-span-1 ' +
+            (openPanes.length === 1
+              ? currentPane !== 'none'
+                ? `row-start-1 row-end-3`
+                : `hidden`
+              : ``)
+          }
+        >
+          <Tab.Panel key="none" />
+          {filteredPanes.map((pane) => (
+            <Tab.Panel key={pane.id} className="h-full">
+              <ModelingPane
+                id={`${pane.id}-pane`}
+                title={pane.title}
+                Menu={pane.Menu}
+              >
+                {pane.Content instanceof Function ? (
+                  <pane.Content />
+                ) : (
+                  pane.Content
+                )}
+              </ModelingPane>
+            </Tab.Panel>
+          ))}
+        </Tab.Panels>
+      </Tab.Group>
+    </div>
   )
 }
 

src/components/ProjectSidebarMenu.test.tsx

@@ -1,8 +1,7 @@
-import { fireEvent, render, screen } from '@testing-library/react'
+import { render, screen } from '@testing-library/react'
 import { BrowserRouter } from 'react-router-dom'
 import ProjectSidebarMenu from './ProjectSidebarMenu'
 import { SettingsAuthProviderJest } from './SettingsAuthProvider'
-import { APP_NAME } from 'lib/constants'
 import { CommandBarProvider } from './CommandBar/CommandBarProvider'
 import { Project } from 'wasm-lib/kcl/bindings/Project'
 

src/components/UserSidebarMenu.tsx

@@ -39,7 +39,7 @@ const UserSidebarMenu = ({ user }: { user?: User }) => {
     <Popover className="relative">
       {user?.image && !imageLoadFailed ? (
         <Popover.Button
-          className="border-0 rounded-full w-fit min-w-max p-0 group"
+          className="relative border-0 rounded-full w-fit min-w-max p-0 group"
           data-testid="user-sidebar-toggle"
         >
           <div className="rounded-full border overflow-hidden">
@@ -51,6 +51,9 @@ const UserSidebarMenu = ({ user }: { user?: User }) => {
               onError={() => setImageLoadFailed(true)}
             />
           </div>
+          <Tooltip position="bottom-right" delay={1000}>
+            User menu
+          </Tooltip>
         </Popover.Button>
       ) : (
         <ActionButton
@@ -59,7 +62,7 @@ const UserSidebarMenu = ({ user }: { user?: User }) => {
           className="border-transparent !px-0"
           data-testid="user-sidebar-toggle"
         >
-          <Tooltip position="left" delay={1000}>
+          <Tooltip position="bottom-right" delay={1000}>
             User menu
           </Tooltip>
         </ActionButton>

src/index.css

@@ -147,15 +147,33 @@ code {
 
 #code-mirror-override .cm-activeLine,
 #code-mirror-override .cm-activeLineGutter {
-  @apply bg-primary/10;
+  @apply bg-primary/5;
 }
 
 .dark #code-mirror-override .cm-activeLine,
 .dark #code-mirror-override .cm-activeLineGutter {
-  @apply bg-primary/20;
+  @apply bg-chalkboard-70/20;
   mix-blend-mode: lighten;
 }
 
+#code-mirror-override .cm-focused .cm-activeLine,
+#code-mirror-override .cm-focused .cm-activeLineGutter {
+  @apply bg-primary/10;
+}
+
+.dark #code-mirror-override .cm-focused .cm-activeLine,
+.dark #code-mirror-override .cm-focused .cm-activeLineGutter {
+  @apply bg-chalkboard-70/40;
+}
+
+#code-mirror-override .cm-matchingBracket {
+  @apply bg-primary/20;
+}
+
+.dark #code-mirror-override .cm-matchingBracket {
+  @apply bg-chalkboard-70/60;
+}
+
 #code-mirror-override .cm-gutters {
   @apply bg-chalkboard-10/30;
 }
@@ -171,22 +189,8 @@ code {
   @apply caret-chalkboard-10;
 }
 
-#code-mirror-override .cm-focused .cm-cursor {
-  width: 0px;
-}
-#code-mirror-override .cm-cursor {
-  display: block;
-  width: 1ch;
-  @apply mix-blend-multiply;
-  @apply border-l-primary;
-}
-
-.dark #code-mirror-override .cm-cursor {
-  @apply border-l-chalkboard-10;
-}
-
-#code-mirror-override.blink .cm-cursor {
-  animation: blink 1200ms ease-out infinite;
+#code-mirror-override .cm-focused {
+  outline: none;
 }
 
 @keyframes blink {

src/lang/KclSingleton.ts

@@ -41,7 +41,10 @@ export class KclManager {
   engineCommandManager: EngineCommandManager
   private _defferer = deferExecution((code: string) => {
     const ast = this.safeParse(code)
-    if (!ast) return
+    if (!ast) {
+      this.clearAst()
+      return
+    }
     try {
       const fmtAndStringify = (ast: Program) =>
         JSON.stringify(parse(recast(ast)))
@@ -89,7 +92,6 @@ export class KclManager {
     return this._kclErrors
   }
   set kclErrors(kclErrors) {
-    console.log('[lsp] not lsp, actually typescript: ', kclErrors)
     this._kclErrors = kclErrors
     let diagnostics = kclErrorsToDiagnostics(kclErrors)
     editorManager.addDiagnostics(diagnostics)
@@ -146,6 +148,18 @@ export class KclManager {
     this._executeCallback = callback
   }
 
+  clearAst() {
+    this._ast = {
+      body: [],
+      start: 0,
+      end: 0,
+      nonCodeMeta: {
+        nonCodeNodes: {},
+        start: [],
+      },
+    }
+  }
+
   safeParse(code: string): Program | null {
     try {
       const ast = parse(code)
@@ -293,14 +307,20 @@ export class KclManager {
     if (!force) return this._defferer(codeManager.code)
 
     const ast = this.safeParse(codeManager.code)
-    if (!ast) return
+    if (!ast) {
+      this.clearAst()
+      return
+    }
     this.ast = { ...ast }
     return this.executeAst(ast, zoomToFit)
   }
   format() {
     const originalCode = codeManager.code
     const ast = this.safeParse(originalCode)
-    if (!ast) return
+    if (!ast) {
+      this.clearAst()
+      return
+    }
     const code = recast(ast)
     if (originalCode === code) return
 

src/lang/artifact.test.ts

@@ -51,13 +51,7 @@ const mySketch001 = startSketchOn('XY')
           },
         },
       ],
-      position: [0, 0, 0],
-      rotation: [0, 0, 0, 1],
-      xAxis: { x: 1, y: 0, z: 0 },
-      yAxis: { x: 0, y: 1, z: 0 },
-      zAxis: { x: 0, y: 0, z: 1 },
       id: expect.any(String),
-      entityId: expect.any(String),
       __meta: [{ sourceRange: [46, 71] }],
     })
   })
@@ -79,8 +73,6 @@ const mySketch001 = startSketchOn('XY')
       value: [
         {
           type: 'extrudePlane',
-          position: [0, 0, 0],
-          rotation: [0, 0, 0, 1],
           faceId: expect.any(String),
           name: '',
           id: expect.any(String),
@@ -88,8 +80,6 @@ const mySketch001 = startSketchOn('XY')
         },
         {
           type: 'extrudePlane',
-          position: [0, 0, 0],
-          rotation: [0, 0, 0, 1],
           faceId: expect.any(String),
           name: '',
           id: expect.any(String),
@@ -119,8 +109,6 @@ const mySketch001 = startSketchOn('XY')
         },
       ],
       height: 2,
-      position: [0, 0, 0],
-      rotation: [0, 0, 0, 1],
       xAxis: { x: 1, y: 0, z: 0 },
       yAxis: { x: 0, y: 1, z: 0 },
       zAxis: { x: 0, y: 0, z: 1 },
@@ -162,8 +150,6 @@ const sk2 = startSketchOn('XY')
         value: [
           {
             type: 'extrudePlane',
-            position: [0, 0, 0],
-            rotation: [0, 0, 0, 1],
             faceId: expect.any(String),
             name: '',
             id: expect.any(String),
@@ -171,8 +157,6 @@ const sk2 = startSketchOn('XY')
           },
           {
             type: 'extrudePlane',
-            position: [0, 0, 0],
-            rotation: [0, 0, 0, 1],
             faceId: expect.any(String),
             name: 'p',
             id: expect.any(String),
@@ -180,8 +164,6 @@ const sk2 = startSketchOn('XY')
           },
           {
             type: 'extrudePlane',
-            position: [0, 0, 0],
-            rotation: [0, 0, 0, 1],
             faceId: expect.any(String),
             name: '',
             id: expect.any(String),
@@ -221,8 +203,6 @@ const sk2 = startSketchOn('XY')
           },
         ],
         height: 2,
-        position: [0, 0, 0],
-        rotation: [0, 0, 0, 1],
         xAxis: { x: 1, y: 0, z: 0 },
         yAxis: { x: 0, y: 1, z: 0 },
         zAxis: { x: 0, y: 0, z: 1 },
@@ -236,8 +216,6 @@ const sk2 = startSketchOn('XY')
         value: [
           {
             type: 'extrudePlane',
-            position: [0, 0, 0],
-            rotation: [0, 0, 0, 1],
             faceId: expect.any(String),
             name: '',
             id: expect.any(String),
@@ -245,8 +223,6 @@ const sk2 = startSketchOn('XY')
           },
           {
             type: 'extrudePlane',
-            position: [0, 0, 0],
-            rotation: [0, 0, 0, 1],
             faceId: expect.any(String),
             name: 'p',
             id: expect.any(String),
@@ -254,8 +230,6 @@ const sk2 = startSketchOn('XY')
           },
           {
             type: 'extrudePlane',
-            position: [0, 0, 0],
-            rotation: [0, 0, 0, 1],
             faceId: expect.any(String),
             name: '',
             id: expect.any(String),
@@ -295,8 +269,6 @@ const sk2 = startSketchOn('XY')
           },
         ],
         height: 2,
-        position: [0, 0, 0],
-        rotation: [0, 0, 0, 1],
         xAxis: { x: 1, y: 0, z: 0 },
         yAxis: { x: 0, y: 1, z: 0 },
         zAxis: { x: 0, y: 0, z: 1 },

src/lang/codeManager.ts

@@ -22,7 +22,7 @@ export default class CodeManager {
       return
     }
 
-    const storedCode = safeLSGetItem(PERSIST_CODE_TOKEN) || ''
+    const storedCode = safeLSGetItem(PERSIST_CODE_TOKEN)
     // TODO #819 remove zustand persistence logic in a few months
     // short term migration, shouldn't make a difference for tauri app users
     // anyway since that's filesystem based.
@@ -68,7 +68,9 @@ export default class CodeManager {
     this._currentFilePath = path
   }
 
-  // This updates the code state and calls the updateState function.
+  /**
+   * This updates the code state and calls the updateState function.
+   */
   updateCodeState(code: string): void {
     if (this._code !== code) {
       this.code = code
@@ -76,7 +78,9 @@ export default class CodeManager {
     }
   }
 
-  // Update the code in the editor.
+  /**
+   * Update the code in the editor.
+   */
   updateCodeEditor(code: string): void {
     this.code = code
     if (editorManager.editorView) {
@@ -90,7 +94,9 @@ export default class CodeManager {
     }
   }
 
-  // Update the code, state, and the code the code mirror editor sees.
+  /**
+   * Update the code, state, and the code the code mirror editor sees.
+   */
   updateCodeStateEditor(code: string): void {
     if (this._code !== code) {
       this.code = code

src/lang/executor.test.ts

@@ -177,13 +177,7 @@ const newVar = myVar + 1`
           },
         },
       ],
-      position: [0, 0, 0],
-      rotation: [0, 0, 0, 1],
-      xAxis: { x: 1, y: 0, z: 0 },
-      yAxis: { x: 0, y: 1, z: 0 },
-      zAxis: { x: 0, y: 0, z: 1 },
       id: expect.any(String),
-      entityId: expect.any(String),
       __meta: [{ sourceRange: [39, 63] }],
     })
   })

src/lang/queryAst.test.ts

@@ -7,6 +7,8 @@ import {
   doesPipeHaveCallExp,
   hasExtrudeSketchGroup,
   findUsesOfTagInPipe,
+  hasSketchPipeBeenExtruded,
+  hasExtrudableGeometry,
 } from './queryAst'
 import { enginelessExecutor } from '../lib/testHelpers'
 import {
@@ -396,3 +398,90 @@ describe('Testing findUsesOfTagInPipe', () => {
     expect(result).toHaveLength(0)
   })
 })
+
+describe('Testing hasSketchPipeBeenExtruded', () => {
+  const exampleCode = `const sketch001 = startSketchOn('XZ')
+  |> startProfileAt([3.29, 7.86], %)
+  |> line([2.48, 2.44], %)
+  |> line([2.66, 1.17], %)
+  |> line([3.75, 0.46], %)
+  |> line([4.99, -0.46], %, 'seg01')
+  |> line([3.3, -2.12], %)
+  |> line([2.16, -3.33], %)
+  |> line([0.85, -3.08], %)
+  |> line([-0.18, -3.36], %)
+  |> line([-3.86, -2.73], %)
+  |> line([-17.67, 0.85], %)
+  |> close(%)
+const extrude001 = extrude(10, sketch001)
+const sketch002 = startSketchOn(extrude001, 'seg01')
+  |> startProfileAt([-12.94, 6.6], %)
+  |> line([2.45, -0.2], %)
+  |> line([-2, -1.25], %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
+`
+  it('finds sketch001 pipe to be extruded', async () => {
+    const ast = parse(exampleCode)
+    const lineOfInterest = `line([4.99, -0.46], %, 'seg01')`
+    const characterIndex =
+      exampleCode.indexOf(lineOfInterest) + lineOfInterest.length
+    const extruded = hasSketchPipeBeenExtruded(
+      {
+        range: [characterIndex, characterIndex],
+        type: 'default',
+      },
+      ast
+    )
+    expect(extruded).toBeTruthy()
+  })
+  it('find sketch002 NOT pipe to be extruded', async () => {
+    const ast = parse(exampleCode)
+    const lineOfInterest = `line([2.45, -0.2], %)`
+    const characterIndex =
+      exampleCode.indexOf(lineOfInterest) + lineOfInterest.length
+    const extruded = hasSketchPipeBeenExtruded(
+      {
+        range: [characterIndex, characterIndex],
+        type: 'default',
+      },
+      ast
+    )
+    expect(extruded).toBeFalsy()
+  })
+})
+
+describe('Testing hasExtrudableGeometry', () => {
+  it('finds sketch001 pipe to be extruded', async () => {
+    const exampleCode = `const sketch001 = startSketchOn('XZ')
+  |> startProfileAt([3.29, 7.86], %)
+  |> line([2.48, 2.44], %)
+  |> line([-3.86, -2.73], %)
+  |> line([-17.67, 0.85], %)
+  |> close(%)
+const extrude001 = extrude(10, sketch001)
+const sketch002 = startSketchOn(extrude001, 'seg01')
+  |> startProfileAt([-12.94, 6.6], %)
+  |> line([2.45, -0.2], %)
+  |> line([-2, -1.25], %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
+`
+    const ast = parse(exampleCode)
+    const extrudable = hasExtrudableGeometry(ast)
+    expect(extrudable).toBeTruthy()
+  })
+  it('find sketch002 NOT pipe to be extruded', async () => {
+    const exampleCode = `const sketch001 = startSketchOn('XZ')
+  |> startProfileAt([3.29, 7.86], %)
+  |> line([2.48, 2.44], %)
+  |> line([-3.86, -2.73], %)
+  |> line([-17.67, 0.85], %)
+  |> close(%)
+const extrude001 = extrude(10, sketch001)
+`
+    const ast = parse(exampleCode)
+    const extrudable = hasExtrudableGeometry(ast)
+    expect(extrudable).toBeFalsy()
+  })
+})

src/lang/queryAst.ts

@@ -720,3 +720,78 @@ export function findUsesOfTagInPipe(
   })
   return dependentRanges
 }
+
+export function hasSketchPipeBeenExtruded(selection: Selection, ast: Program) {
+  const path = getNodePathFromSourceRange(ast, selection.range)
+  const { node: pipeExpression } = getNodeFromPath<PipeExpression>(
+    ast,
+    path,
+    'PipeExpression'
+  )
+  if (pipeExpression.type !== 'PipeExpression') return false
+  const varDec = getNodeFromPath<VariableDeclarator>(
+    ast,
+    path,
+    'VariableDeclarator'
+  ).node
+  let extruded = false
+  traverse(ast as any, {
+    enter(node) {
+      if (
+        node.type === 'CallExpression' &&
+        node.callee.type === 'Identifier' &&
+        node.callee.name === 'extrude' &&
+        node.arguments?.[1]?.type === 'Identifier' &&
+        node.arguments[1].name === varDec.id.name
+      ) {
+        extruded = true
+      }
+    },
+  })
+  return extruded
+}
+
+/** File must contain at least one sketch that has not been extruded already */
+export function hasExtrudableGeometry(ast: Program) {
+  const theMap: any = {}
+  traverse(ast as any, {
+    enter(node) {
+      if (
+        node.type === 'VariableDeclarator' &&
+        node.init?.type === 'PipeExpression'
+      ) {
+        let hasStartProfileAt = false
+        let hasStartSketchOn = false
+        let hasClose = false
+        for (const pipe of node.init.body) {
+          if (
+            pipe.type === 'CallExpression' &&
+            pipe.callee.name === 'startProfileAt'
+          ) {
+            hasStartProfileAt = true
+          }
+          if (
+            pipe.type === 'CallExpression' &&
+            pipe.callee.name === 'startSketchOn'
+          ) {
+            hasStartSketchOn = true
+          }
+          if (pipe.type === 'CallExpression' && pipe.callee.name === 'close') {
+            hasClose = true
+          }
+        }
+        if (hasStartProfileAt && hasStartSketchOn && hasClose) {
+          theMap[node.id.name] = true
+        }
+      } else if (
+        node.type === 'CallExpression' &&
+        node.callee.name === 'extrude' &&
+        node.arguments[1]?.type === 'Identifier' &&
+        theMap?.[node?.arguments?.[1]?.name]
+      ) {
+        delete theMap[node.arguments[1].name]
+      }
+    },
+  })
+  return Object.keys(theMap).length > 0
+}

src/lang/std/engineConnection.ts

@@ -58,6 +58,9 @@ function isHighlightSetEntity_type(
 
 type WebSocketResponse = Models['WebSocketResponse_type']
 type OkWebSocketResponseData = Models['OkWebSocketResponseData_type']
+type BatchResponseMap = {
+  [key: string]: Models['BatchResponse_type']
+}
 
 type ResultCommand = CommandInfo & {
   type: 'result'
@@ -1316,7 +1319,8 @@ export class EngineCommandManager extends EventTarget {
             )
             if (
               message.success &&
-              message.resp.type === 'modeling' &&
+              (message.resp.type === 'modeling' ||
+                message.resp.type === 'modeling_batch') &&
               message.request_id
             ) {
               this.handleModelingCommand(
@@ -1380,19 +1384,60 @@ export class EngineCommandManager extends EventTarget {
     id: string,
     raw: WebSocketResponse
   ) {
-    if (message.type !== 'modeling') {
+    if (!(message.type === 'modeling' || message.type === 'modeling_batch')) {
       return
     }
-    const modelingResponse = message.data.modeling_response
+
     const command = this.artifactMap[id]
+    let modelingResponse: Models['OkModelingCmdResponse_type'] = {
+      type: 'empty',
+    }
+    if ('modeling_response' in message.data) {
+      modelingResponse = message.data.modeling_response
+    }
     if (
       command?.type === 'pending' &&
       command.commandType === 'batch' &&
       command?.additionalData?.type === 'batch-ids'
     ) {
-      command.additionalData.ids.forEach((id) => {
-        this.handleModelingCommand(message, id, raw)
-      })
+      if ('responses' in message.data) {
+        const batchResponse = message.data.responses as BatchResponseMap
+        // Iterate over the map of responses.
+        Object.entries(batchResponse).forEach(([key, response]) => {
+          // If the response is a success, we resolve the promise.
+          if ('response' in response && response.response) {
+            this.handleModelingCommand(
+              {
+                type: 'modeling',
+                data: {
+                  modeling_response: response.response,
+                },
+              },
+              key,
+              {
+                request_id: key,
+                resp: {
+                  type: 'modeling',
+                  data: {
+                    modeling_response: response.response,
+                  },
+                },
+                success: true,
+              }
+            )
+          } else if ('errors' in response) {
+            this.handleFailedModelingCommand(key, {
+              request_id: key,
+              success: false,
+              errors: response.errors,
+            })
+          }
+        })
+      } else {
+        command.additionalData.ids.forEach((id) => {
+          this.handleModelingCommand(message, id, raw)
+        })
+      }
       // batch artifact is just a container, we don't need to keep it
       // once we process all the commands inside it
       const resolve = command.resolve
@@ -1401,7 +1446,6 @@ export class EngineCommandManager extends EventTarget {
         id,
         commandType: command.commandType,
         range: command.range,
-        data: modelingResponse,
         raw,
       })
       return
@@ -1422,6 +1466,9 @@ export class EngineCommandManager extends EventTarget {
 
     if (command && command.type === 'pending') {
       const resolve = command.resolve
+      const oldArtifact = this.artifactMap[id] as ArtifactMapCommand & {
+        extrusions?: string[]
+      }
       const artifact = {
         type: 'result',
         range: command.range,
@@ -1430,7 +1477,10 @@ export class EngineCommandManager extends EventTarget {
         parentId: command.parentId ? command.parentId : undefined,
         data: modelingResponse,
         raw,
-      } as const
+      } as ArtifactMapCommand & { extrusions?: string[] }
+      if (oldArtifact?.extrusions) {
+        artifact.extrusions = oldArtifact.extrusions
+      }
       this.artifactMap[id] = artifact
       if (
         (command.commandType === 'entity_linear_pattern' &&
@@ -1733,7 +1783,7 @@ export class EngineCommandManager extends EventTarget {
     command: EngineCommand
     ast: Program
     idToRangeMap?: { [key: string]: SourceRange }
-  }): Promise<any> {
+  }): Promise<ResolveCommand | void> {
     if (this.engineConnection === undefined) {
       return Promise.resolve()
     }
@@ -1802,11 +1852,13 @@ export class EngineCommandManager extends EventTarget {
     command: Models['ModelingCmd_type'],
     ast?: Program,
     range?: SourceRange
-  ) {
+  ): Promise<ResolveCommand | void> {
     let resolve: (val: any) => void = () => {}
-    const promise = new Promise((_resolve, reject) => {
-      resolve = _resolve
-    })
+    const promise: Promise<ResolveCommand | void> = new Promise(
+      (_resolve, reject) => {
+        resolve = _resolve
+      }
+    )
     const getParentId = (): string | undefined => {
       if (command.type === 'extend_path') return command.path
       if (command.type === 'solid3d_get_extrusion_face_info') {
@@ -1857,6 +1909,8 @@ export class EngineCommandManager extends EventTarget {
         } else {
           typedTarget.extrusions = [id]
         }
+        // Update in the map.
+        this.artifactMap[command.target] = typedTarget
       }
     }
     return promise
@@ -1867,11 +1921,13 @@ export class EngineCommandManager extends EventTarget {
     idToRangeMap?: { [key: string]: SourceRange },
     ast?: Program,
     range?: SourceRange
-  ) {
+  ): Promise<ResolveCommand | void> {
     let resolve: (val: any) => void = () => {}
-    const promise = new Promise((_resolve, reject) => {
-      resolve = _resolve
-    })
+    const promise: Promise<ResolveCommand | void> = new Promise(
+      (_resolve, reject) => {
+        resolve = _resolve
+      }
+    )
 
     if (!idToRangeMap) {
       throw new Error('idToRangeMap is required for batch commands')
@@ -1891,7 +1947,7 @@ export class EngineCommandManager extends EventTarget {
       resolve,
     }
 
-    await Promise.all(
+    Promise.all(
       commands.map((c) =>
         this.handlePendingCommand(c.cmd_id, c.cmd, ast, idToRangeMap[c.cmd_id])
       )
@@ -1903,7 +1959,7 @@ export class EngineCommandManager extends EventTarget {
     rangeStr: string,
     commandStr: string,
     idToRangeStr: string
-  ): Promise<any> {
+  ): Promise<string | void> {
     if (this.engineConnection === undefined) {
       return Promise.resolve()
     }
@@ -1932,13 +1988,13 @@ export class EngineCommandManager extends EventTarget {
       command,
       ast: this.getAst(),
       idToRangeMap,
-    }).then(({ raw }: { raw: WebSocketResponse | undefined | null }) => {
-      if (raw === undefined || raw === null) {
+    }).then((resp) => {
+      if (!resp) {
         throw new Error(
           'returning modeling cmd response to the rust side is undefined or null'
         )
       }
-      return JSON.stringify(raw)
+      return JSON.stringify(resp.raw)
     })
   }
   commandResult(id: string): Promise<any> {

src/lang/wasm.ts

@@ -25,7 +25,7 @@ import type { Program } from '../wasm-lib/kcl/bindings/Program'
 import type { Token } from '../wasm-lib/kcl/bindings/Token'
 import { Coords2d } from './std/sketch'
 import { fileSystemManager } from 'lang/std/fileSystemManager'
-import { AppInfo } from 'wasm-lib/kcl/bindings/AppInfo'
+import { CoreDumpInfo } from 'wasm-lib/kcl/bindings/CoreDumpInfo'
 import { CoreDumpManager } from 'lib/coredump'
 import openWindow from 'lib/openWindow'
 import { DefaultPlanes } from 'wasm-lib/kcl/bindings/DefaultPlanes'
@@ -74,8 +74,6 @@ export type SyntaxType =
   | 'UnaryExpression'
 
 export type { SourceRange } from '../wasm-lib/kcl/bindings/SourceRange'
-export type { Position } from '../wasm-lib/kcl/bindings/Position'
-export type { Rotation } from '../wasm-lib/kcl/bindings/Rotation'
 export type { Path } from '../wasm-lib/kcl/bindings/Path'
 export type { SketchGroup } from '../wasm-lib/kcl/bindings/SketchGroup'
 export type { ExtrudeGroup } from '../wasm-lib/kcl/bindings/ExtrudeGroup'
@@ -335,14 +333,27 @@ export function programMemoryInit(): ProgramMemory {
 export async function coreDump(
   coreDumpManager: CoreDumpManager,
   openGithubIssue: boolean = false
-): Promise<AppInfo> {
+): Promise<CoreDumpInfo> {
   try {
-    const dump: AppInfo = await coredump(coreDumpManager)
+    const dump: CoreDumpInfo = await coredump(coreDumpManager)
+    /* NOTE: this console output of the coredump should include the field
+       `github_issue_url` which is not in the uploaded coredump file.
+       `github_issue_url` is added after the file is uploaded
+       and is only needed for the openWindow operation which creates
+       a new GitHub issue for the user.
+     */
     if (openGithubIssue && dump.github_issue_url) {
       openWindow(dump.github_issue_url)
+    } else {
+      console.error(
+        'github_issue_url undefined. Unable to create GitHub issue for coredump.'
+      )
     }
+    console.log('CoreDump: final coredump', dump)
+    console.log('CoreDump: final coredump JSON', JSON.stringify(dump))
     return dump
   } catch (e: any) {
+    console.error('CoreDump: error', e)
     throw new Error(`Error getting core dump: ${e}`)
   }
 }

src/lib/coredump.ts

@@ -13,8 +13,15 @@ import screenshot from 'lib/screenshot'
 import React from 'react'
 import { VITE_KC_API_BASE_URL } from 'env'
 
-// This is a class for getting all the values from the JS world to pass to the Rust world
-// for a core dump.
+/**
+ * CoreDumpManager module
+ * - for getting all the values from the JS world to pass to the Rust world for a core dump.
+ * @module lib/coredump
+ * @class
+ */
+// CoreDumpManager is instantiated in ModelingMachineProvider and passed to coreDump() in wasm.ts
+// The async function coreDump() handles any errors thrown in its Promise catch method and rethrows
+// them to so the toast handler in ModelingMachineProvider can show the user an error message toast
 export class CoreDumpManager {
   engineCommandManager: EngineCommandManager
   htmlRef: React.RefObject<HTMLDivElement> | null
@@ -144,6 +151,293 @@ export class CoreDumpManager {
       })
   }
 
+  // Currently just a placeholder to begin loading singleton and xstate data into
+  getClientState(): Promise<string> {
+    /**
+     * Deep clone a JavaScript Object
+     * - NOTE: this function throws on parse errors from things like circular references
+     * - It is also synchronous and could be more performant
+     * - There is a whole rabbit hole to explore here if you like.
+     * - This works for our use case.
+     * @param {object} obj - The object to clone.
+     */
+    const deepClone = (obj: any) => JSON.parse(JSON.stringify(obj))
+
+    /**
+     * Check if a function is private method
+     */
+    const isPrivateMethod = (key: string) => {
+      return key.length && key[0] === '_'
+    }
+
+    // Turn off verbose logging by default
+    const verboseLogging = false
+
+    /**
+     * Toggle verbose debug logging of step-by-step client state coredump data
+     */
+    const debugLog = verboseLogging ? console.log : () => {}
+
+    console.warn('CoreDump: Gathering client state')
+
+    // Initialize the clientState object
+    let clientState = {
+      // singletons
+      engine_command_manager: {
+        artifact_map: {},
+        command_logs: [],
+        engine_connection: { state: { type: '' } },
+        default_planes: {},
+        scene_command_artifacts: {},
+      },
+      kcl_manager: {
+        ast: {},
+        kcl_errors: [],
+      },
+      scene_infra: {},
+      scene_entities_manager: {},
+      editor_manager: {},
+      // xstate
+      auth_machine: {},
+      command_bar_machine: {},
+      file_machine: {},
+      home_machine: {},
+      modeling_machine: {},
+      settings_machine: {},
+    }
+    debugLog('CoreDump: initialized clientState', clientState)
+    debugLog('CoreDump: globalThis.window', globalThis.window)
+
+    try {
+      // Singletons
+
+      // engine_command_manager
+      debugLog('CoreDump: engineCommandManager', this.engineCommandManager)
+
+      // artifact map - this.engineCommandManager.artifactMap
+      if (this.engineCommandManager?.artifactMap) {
+        debugLog(
+          'CoreDump: Engine Command Manager artifact map',
+          this.engineCommandManager.artifactMap
+        )
+        clientState.engine_command_manager.artifact_map = deepClone(
+          this.engineCommandManager.artifactMap
+        )
+      }
+
+      // command logs - this.engineCommandManager.commandLogs
+      if (this.engineCommandManager?.commandLogs) {
+        debugLog(
+          'CoreDump: Engine Command Manager command logs',
+          this.engineCommandManager.commandLogs
+        )
+        clientState.engine_command_manager.command_logs = deepClone(
+          this.engineCommandManager.commandLogs
+        )
+      }
+
+      // default planes - this.engineCommandManager.defaultPlanes
+      if (this.engineCommandManager?.defaultPlanes) {
+        debugLog(
+          'CoreDump: Engine Command Manager default planes',
+          this.engineCommandManager.defaultPlanes
+        )
+        clientState.engine_command_manager.default_planes = deepClone(
+          this.engineCommandManager.defaultPlanes
+        )
+      }
+
+      // engine connection state
+      if (this.engineCommandManager?.engineConnection?.state) {
+        debugLog(
+          'CoreDump: Engine Command Manager engine connection state',
+          this.engineCommandManager.engineConnection.state
+        )
+        clientState.engine_command_manager.engine_connection.state =
+          this.engineCommandManager.engineConnection.state
+      }
+
+      // in sequence - this.engineCommandManager.inSequence
+      if (this.engineCommandManager?.inSequence) {
+        debugLog(
+          'CoreDump: Engine Command Manager in sequence',
+          this.engineCommandManager.inSequence
+        )
+        ;(clientState.engine_command_manager as any).in_sequence =
+          this.engineCommandManager.inSequence
+      }
+
+      // out sequence - this.engineCommandManager.outSequence
+      if (this.engineCommandManager?.outSequence) {
+        debugLog(
+          'CoreDump: Engine Command Manager out sequence',
+          this.engineCommandManager.outSequence
+        )
+        ;(clientState.engine_command_manager as any).out_sequence =
+          this.engineCommandManager.outSequence
+      }
+
+      // scene command artifacts - this.engineCommandManager.sceneCommandArtifacts
+      if (this.engineCommandManager?.sceneCommandArtifacts) {
+        debugLog(
+          'CoreDump: Engine Command Manager scene command artifacts',
+          this.engineCommandManager.sceneCommandArtifacts
+        )
+        clientState.engine_command_manager.scene_command_artifacts = deepClone(
+          this.engineCommandManager.sceneCommandArtifacts
+        )
+      }
+
+      // KCL Manager - globalThis?.window?.kclManager
+      const kclManager = (globalThis?.window as any)?.kclManager
+      debugLog('CoreDump: kclManager', kclManager)
+
+      if (kclManager) {
+        // KCL Manager AST
+        debugLog('CoreDump: KCL Manager AST', kclManager?.ast)
+        if (kclManager?.ast) {
+          clientState.kcl_manager.ast = deepClone(kclManager.ast)
+        }
+
+        // KCL Errors
+        debugLog('CoreDump: KCL Errors', kclManager?.kclErrors)
+        if (kclManager?.kclErrors) {
+          clientState.kcl_manager.kcl_errors = deepClone(kclManager.kclErrors)
+        }
+
+        // KCL isExecuting
+        debugLog('CoreDump: KCL isExecuting', kclManager?.isExecuting)
+        if (kclManager?.isExecuting) {
+          ;(clientState.kcl_manager as any).isExecuting = kclManager.isExecuting
+        }
+
+        // KCL logs
+        debugLog('CoreDump: KCL logs', kclManager?.logs)
+        if (kclManager?.logs) {
+          ;(clientState.kcl_manager as any).logs = deepClone(kclManager.logs)
+        }
+
+        // KCL programMemory
+        debugLog('CoreDump: KCL programMemory', kclManager?.programMemory)
+        if (kclManager?.programMemory) {
+          ;(clientState.kcl_manager as any).programMemory = deepClone(
+            kclManager.programMemory
+          )
+        }
+
+        // KCL wasmInitFailed
+        debugLog('CoreDump: KCL wasmInitFailed', kclManager?.wasmInitFailed)
+        if (kclManager?.wasmInitFailed) {
+          ;(clientState.kcl_manager as any).wasmInitFailed =
+            kclManager.wasmInitFailed
+        }
+      }
+
+      // Scene Infra - globalThis?.window?.sceneInfra
+      const sceneInfra = (globalThis?.window as any)?.sceneInfra
+      debugLog('CoreDump: Scene Infra', sceneInfra)
+
+      if (sceneInfra) {
+        const sceneInfraSkipKeys = ['camControls']
+        const sceneInfraKeys = Object.keys(sceneInfra)
+          .sort()
+          .filter((entry) => {
+            return (
+              typeof sceneInfra[entry] !== 'function' &&
+              !sceneInfraSkipKeys.includes(entry)
+            )
+          })
+
+        debugLog('CoreDump: Scene Infra keys', sceneInfraKeys)
+        sceneInfraKeys.forEach((key: string) => {
+          debugLog('CoreDump: Scene Infra', key, sceneInfra[key])
+          try {
+            ;(clientState.scene_infra as any)[key] = sceneInfra[key]
+          } catch (error) {
+            console.error(
+              'CoreDump: unable to parse Scene Infra ' + key + ' data due to ',
+              error
+            )
+          }
+        })
+      }
+
+      // Scene Entities Manager - globalThis?.window?.sceneEntitiesManager
+      const sceneEntitiesManager = (globalThis?.window as any)
+        ?.sceneEntitiesManager
+      debugLog('CoreDump: sceneEntitiesManager', sceneEntitiesManager)
+
+      if (sceneEntitiesManager) {
+        // Scene Entities Manager active segments
+        debugLog(
+          'CoreDump: Scene Entities Manager active segments',
+          sceneEntitiesManager?.activeSegments
+        )
+        if (sceneEntitiesManager?.activeSegments) {
+          ;(clientState.scene_entities_manager as any).activeSegments =
+            deepClone(sceneEntitiesManager.activeSegments)
+        }
+      }
+
+      // Editor Manager - globalThis?.window?.editorManager
+      const editorManager = (globalThis?.window as any)?.editorManager
+      debugLog('CoreDump: editorManager', editorManager)
+
+      if (editorManager) {
+        const editorManagerSkipKeys = ['camControls']
+        const editorManagerKeys = Object.keys(editorManager)
+          .sort()
+          .filter((entry) => {
+            return (
+              typeof editorManager[entry] !== 'function' &&
+              !isPrivateMethod(entry) &&
+              !editorManagerSkipKeys.includes(entry)
+            )
+          })
+
+        debugLog('CoreDump: Editor Manager keys', editorManagerKeys)
+        editorManagerKeys.forEach((key: string) => {
+          debugLog('CoreDump: Editor Manager', key, editorManager[key])
+          try {
+            ;(clientState.editor_manager as any)[key] = deepClone(
+              editorManager[key]
+            )
+          } catch (error) {
+            console.error(
+              'CoreDump: unable to parse Editor Manager ' +
+                key +
+                ' data due to ',
+              error
+            )
+          }
+        })
+      }
+
+      // enableMousePositionLogs - Not coredumped
+      // See https://github.com/KittyCAD/modeling-app/issues/2338#issuecomment-2136441998
+      debugLog(
+        'CoreDump: enableMousePositionLogs [not coredumped]',
+        (globalThis?.window as any)?.enableMousePositionLogs
+      )
+
+      // XState Machines
+      debugLog(
+        'CoreDump: xstate services',
+        (globalThis?.window as any)?.__xstate__?.services
+      )
+
+      debugLog('CoreDump: final clientState', clientState)
+
+      const clientStateJson = JSON.stringify(clientState)
+      debugLog('CoreDump: final clientState JSON', clientStateJson)
+
+      return Promise.resolve(clientStateJson)
+    } catch (error) {
+      console.error('CoreDump: unable to return data due to ', error)
+      return Promise.reject(JSON.stringify(error))
+    }
+  }
+
   // Return a data URL (png format) of the screenshot of the current page.
   screenshot(): Promise<string> {
     return screenshot(this.htmlRef)

src/lib/selections.ts

@@ -16,6 +16,7 @@ import { Program } from 'lang/wasm'
 import {
   doesPipeHaveCallExp,
   getNodeFromPath,
+  hasSketchPipeBeenExtruded,
   isSingleCursorInPipe,
 } from 'lang/queryAst'
 import { CommandArgument } from './commandTypes'
@@ -387,6 +388,7 @@ export function canExtrudeSelection(selection: Selections) {
   )
   return (
     !!isSketchPipe(selection) &&
+    commonNodes.every((n) => !hasSketchPipeBeenExtruded(n.selection, n.ast)) &&
     commonNodes.every((n) => nodeHasClose(n)) &&
     commonNodes.every((n) => !nodeHasExtrude(n))
   )

src/lib/settings/initialSettings.tsx

@@ -157,7 +157,7 @@ export function createSettings() {
         ),
       }),
       enableSSAO: new Setting<boolean>({
-        defaultValue: true,
+        defaultValue: false,
         description:
           'Whether or not Screen Space Ambient Occlusion (SSAO) is enabled',
         validate: (v) => typeof v === 'boolean',

src/routes/Onboarding/CodeEditor.tsx

@@ -1,8 +1,9 @@
-import { OnboardingButtons, useDismiss, useNextClick } from '.'
+import { OnboardingButtons, useDemoCode, useDismiss, useNextClick } from '.'
 import { onboardingPaths } from 'routes/Onboarding/paths'
 import { useStore } from '../../useStore'
 
-export default function CodeEditor() {
+export default function OnboardingCodeEditor() {
+  useDemoCode()
   const { buttonDownInStream } = useStore((s) => ({
     buttonDownInStream: s.buttonDownInStream,
   }))

src/routes/Onboarding/FutureWork.tsx

@@ -1,24 +1,19 @@
-import { OnboardingButtons, useDismiss } from '.'
+import { OnboardingButtons, useDemoCode, useDismiss } from '.'
 import { useEffect } from 'react'
-import { bracket } from 'lib/exampleKcl'
-import { codeManager, kclManager } from 'lib/singletons'
 import { useModelingContext } from 'hooks/useModelingContext'
 import { APP_NAME } from 'lib/constants'
 import { onboardingPaths } from './paths'
+import { sceneInfra } from 'lib/singletons'
 
 export default function FutureWork() {
   const { send } = useModelingContext()
   const dismiss = useDismiss()
 
+  // Reset the code, the camera, and the modeling state
+  useDemoCode()
   useEffect(() => {
-    // We do want to update both the state and editor here.
-    codeManager.updateCodeEditor(bracket)
-    if (kclManager.engineCommandManager.engineConnection?.isReady()) {
-      // If the engine is ready, promptly execute the loaded code
-      kclManager.executeCode(true, true)
-    }
-
     send({ type: 'Cancel' }) // in case the user hit 'Next' while still in sketch mode
+    sceneInfra.camControls.resetCameraPosition()
   }, [send])
 
   return (

src/routes/Onboarding/InteractiveNumbers.tsx

@@ -1,9 +1,16 @@
-import { OnboardingButtons, kbdClasses, useDismiss, useNextClick } from '.'
+import {
+  OnboardingButtons,
+  kbdClasses,
+  useDemoCode,
+  useDismiss,
+  useNextClick,
+} from '.'
 import { onboardingPaths } from 'routes/Onboarding/paths'
 import { useStore } from '../../useStore'
 import { bracketWidthConstantLine } from 'lib/exampleKcl'
 
-export default function InteractiveNumbers() {
+export default function OnboardingInteractiveNumbers() {
+  useDemoCode()
   const { buttonDownInStream } = useStore((s) => ({
     buttonDownInStream: s.buttonDownInStream,
   }))
@@ -33,8 +40,10 @@ export default function InteractiveNumbers() {
               <kbd className={kbdClasses}>Option</kbd>) key
             </li>
             <li>
-              Hover over the number assigned to <code>width</code> on line{' '}
-              {bracketWidthConstantLine}
+              Hover over the number assigned to "width" on{' '}
+              <em>
+                <strong>line {bracketWidthConstantLine}</strong>
+              </em>
             </li>
             <li>Drag the number left and right to change its value</li>
           </ol>

src/routes/Onboarding/Introduction.tsx

@@ -1,4 +1,4 @@
-import { OnboardingButtons, useDismiss, useNextClick } from '.'
+import { OnboardingButtons, useDemoCode, useDismiss, useNextClick } from '.'
 import { onboardingPaths } from 'routes/Onboarding/paths'
 import { useSettingsAuthContext } from 'hooks/useSettingsAuthContext'
 import { Themes, getSystemTheme } from 'lib/theme'
@@ -10,7 +10,6 @@ import {
 import { isTauri } from 'lib/isTauri'
 import { useNavigate } from 'react-router-dom'
 import { paths } from 'lib/paths'
-import { useEffect } from 'react'
 import { codeManager, kclManager } from 'lib/singletons'
 import { join } from '@tauri-apps/api/path'
 import {
@@ -92,7 +91,7 @@ function OnboardingWithNewFile() {
   )
 }
 
-export default function Introduction() {
+export default function OnboardingIntroduction() {
   const {
     settings: {
       state: {
@@ -112,9 +111,7 @@ export default function Introduction() {
   const currentCode = codeManager.code
   const isStarterCode = currentCode === '' || currentCode === bracket
 
-  useEffect(() => {
-    if (codeManager.code === '') codeManager.updateCodeEditor(bracket)
-  }, [])
+  useDemoCode()
 
   return isStarterCode ? (
     <div className="fixed inset-0 z-50 grid place-content-center bg-chalkboard-110/50">
@@ -159,6 +156,12 @@ export default function Introduction() {
             ! We are trying to release as early as possible to get feedback from
             users like you.
           </p>
+          <p>
+            As you go through the onboarding, we'll be changing and resetting
+            your code occasionally, so that we can reference specific code
+            features. So hold off on writing production KCL code until you're
+            done with the onboarding 😉
+          </p>
         </section>
         <OnboardingButtons
           currentSlug={onboardingPaths.INDEX}

src/routes/Onboarding/ParametricModeling.tsx

@@ -1,11 +1,12 @@
-import { OnboardingButtons, useDismiss, useNextClick } from '.'
+import { OnboardingButtons, useDemoCode, useDismiss, useNextClick } from '.'
 import { onboardingPaths } from 'routes/Onboarding/paths'
 import { useStore } from '../../useStore'
 import { Themes, getSystemTheme } from 'lib/theme'
 import { useSettingsAuthContext } from 'hooks/useSettingsAuthContext'
 import { bracketThicknessCalculationLine } from 'lib/exampleKcl'
 
-export default function ParametricModeling() {
+export default function OnboardingParametricModeling() {
+  useDemoCode()
   const { buttonDownInStream } = useStore((s) => ({
     buttonDownInStream: s.buttonDownInStream,
   }))
@@ -44,8 +45,10 @@ export default function ParametricModeling() {
 
           <p className="my-4">
             We've received this sketch from a designer highlighting an{' '}
-            <em className="text-primary">aluminum bracket</em> they need for
-            this shelf:
+            <em>
+              <strong>aluminum bracket</strong>
+            </em>{' '}
+            they need for this shelf:
           </p>
           <figure className="my-4 w-2/3 mx-auto">
             <img
@@ -59,8 +62,8 @@ export default function ParametricModeling() {
           <p className="my-4">
             We are able to easily calculate the thickness of the material based
             on the width of the bracket to meet a set safety factor on{' '}
-            <em className="text-primary">
-              line {bracketThicknessCalculationLine}
+            <em>
+              <strong>line {bracketThicknessCalculationLine}</strong>
             </em>
             .
           </p>

src/routes/Onboarding/UserMenu.tsx

@@ -1,6 +1,7 @@
 import { OnboardingButtons, useDismiss, useNextClick } from '.'
 import { onboardingPaths } from 'routes/Onboarding/paths'
 import { useStore } from '../../useStore'
+import { useEffect, useState } from 'react'
 
 export default function UserMenu() {
   const { buttonDownInStream } = useStore((s) => ({
@@ -8,6 +9,20 @@ export default function UserMenu() {
   }))
   const dismiss = useDismiss()
   const next = useNextClick(onboardingPaths.PROJECT_MENU)
+  const [avatarErrored, setAvatarErrored] = useState(false)
+  const buttonDescription = !avatarErrored ? 'your avatar' : 'the menu button'
+
+  // Set up error handling for the user's avatar image,
+  // so the onboarding text can be updated if it fails to load.
+  useEffect(() => {
+    const element = globalThis.document.querySelector(
+      '[data-testid="user-sidebar-toggle"] img'
+    )
+
+    if (element?.tagName === 'IMG') {
+      element.addEventListener('error', () => setAvatarErrored(true))
+    }
+  }, [])
 
   return (
     <div className="fixed grid justify-center items-start inset-0 z-50 pointer-events-none">
@@ -20,8 +35,8 @@ export default function UserMenu() {
         <section className="flex-1">
           <h2 className="text-2xl font-bold">User Menu</h2>
           <p className="my-4">
-            Click your avatar on the upper right to open the user menu. You can
-            change your settings, sign out, or request a feature.
+            Click {buttonDescription} in the upper right to open the user menu.
+            You can change your settings, sign out, or request a feature.
           </p>
           <p className="my-4">
             We only support global settings at the moment, but we are working to

src/routes/Onboarding/index.tsx

@@ -19,9 +19,11 @@ import { paths } from 'lib/paths'
 import { useAbsoluteFilePath } from 'hooks/useAbsoluteFilePath'
 import { ActionButton } from 'components/ActionButton'
 import { onboardingPaths } from 'routes/Onboarding/paths'
+import { codeManager, editorManager } from 'lib/singletons'
+import { bracket } from 'lib/exampleKcl'
 
 export const kbdClasses =
-  'p-0.5 text-sm rounded-sm bg-chalkboard-10 dark:bg-chalkboard-100 border border-chalkboard-50'
+  'py-0.5 px-1 text-sm rounded bg-chalkboard-10 dark:bg-chalkboard-100 border border-chalkboard-50 border-b-2'
 
 export const onboardingRoutes = [
   {
@@ -75,6 +77,13 @@ export const onboardingRoutes = [
   },
 ]
 
+export function useDemoCode() {
+  useEffect(() => {
+    if (!editorManager.editorView) return
+    setTimeout(() => codeManager.updateCodeStateEditor(bracket))
+  }, [editorManager.editorView, codeManager.updateCodeStateEditor])
+}
+
 export function useNextClick(newStatus: string) {
   const filePath = useAbsoluteFilePath()
   const {

src/wasm-lib/Cargo.lock

@@ -169,7 +169,7 @@ checksum = "3b43422f69d8ff38f95f1b2bb76517c91589a924d1559a0e935d7c8ce0274c11"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -180,7 +180,7 @@ checksum = "c6fa2087f2753a7da8cc1c0dbfcf89579dd57458e36769de5ac750b4671737ca"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -197,7 +197,7 @@ checksum = "3c87f3f15e7794432337fc718554eaa4dc8f04c9677a950ffe366f20a162ae42"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -437,7 +437,7 @@ dependencies = [
  "heck 0.5.0",
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -635,7 +635,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "strsim 0.10.0",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -646,7 +646,7 @@ checksum = "a668eda54683121533a393014d8692171709ff57a7d61f187b6e782719f8933f"
 dependencies = [
  "darling_core",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -687,7 +687,7 @@ checksum = "4078275de501a61ceb9e759d37bdd3d7210e654dbc167ac1a3678ef4435ed57b"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
  "synstructure",
 ]
 
@@ -716,7 +716,7 @@ dependencies = [
  "rustfmt-wrapper",
  "serde",
  "serde_tokenstream",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -727,7 +727,7 @@ checksum = "67e77553c4162a157adbf834ebae5b415acbecbeafc7a74b0e886657506a7611"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -754,7 +754,7 @@ checksum = "487585f4d0c6655fe74905e2504d8ad6908e4db67f744eb140876906c2f3175d"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -926,7 +926,7 @@ checksum = "87750cf4b7a4c0625b1529e4c543c2182106e4dedc60a2a6455e00d212c489ac"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -1016,7 +1016,7 @@ dependencies = [
  "inflections",
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -1277,6 +1277,12 @@ dependencies = [
  "hashbrown 0.14.3",
 ]
 
+[[package]]
+name = "indoc"
+version = "2.0.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b248f5224d1d606005e02c97f5aa4e88eeb230488bcc03bc9ca4d7991399f2b5"
+
 [[package]]
 name = "inflections"
 version = "1.1.1"
@@ -1369,7 +1375,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-lib"
-version = "0.1.60"
+version = "0.1.62"
 dependencies = [
  "anyhow",
  "approx",
@@ -1399,6 +1405,7 @@ dependencies = [
  "mime_guess",
  "parse-display",
  "pretty_assertions",
+ "pyo3",
  "reqwest",
  "ropey",
  "schemars",
@@ -1431,7 +1438,20 @@ dependencies = [
  "pretty_assertions",
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
+]
+
+[[package]]
+name = "kcl-test-server"
+version = "0.1.0"
+dependencies = [
+ "anyhow",
+ "hyper",
+ "kcl-lib",
+ "pico-args",
+ "serde",
+ "serde_json",
+ "tokio",
 ]
 
 [[package]]
@@ -1556,6 +1576,15 @@ version = "2.7.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "523dc4f511e55ab87b694dc30d0f820d60906ef06413f93d4d7a1385599cc149"
 
+[[package]]
+name = "memoffset"
+version = "0.9.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "488016bfae457b036d996092f6cb448677611ce4449e970ceaf42695203f218a"
+dependencies = [
+ "autocfg",
+]
+
 [[package]]
 name = "mime"
 version = "0.3.17"
@@ -1785,7 +1814,7 @@ dependencies = [
  "regex",
  "regex-syntax 0.8.3",
  "structmeta",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -1815,6 +1844,12 @@ dependencies = [
  "thiserror",
 ]
 
+[[package]]
+name = "pico-args"
+version = "0.5.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "5be167a7af36ee22fe3115051bc51f6e6c7054c9348e28deb4f49bd6f705a315"
+
 [[package]]
 name = "pin-project"
 version = "1.1.5"
@@ -1832,7 +1867,7 @@ checksum = "2f38a4412a78282e09a2cf38d195ea5420d15ba0602cb375210efbc877243965"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -1888,6 +1923,12 @@ dependencies = [
  "miniz_oxide",
 ]
 
+[[package]]
+name = "portable-atomic"
+version = "1.6.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7170ef9988bc169ba16dd36a7fa041e5c4cbeb6a35b76d4c03daded371eae7c0"
+
 [[package]]
 name = "powerfmt"
 version = "0.2.0"
@@ -1936,13 +1977,76 @@ dependencies = [
 
 [[package]]
 name = "proc-macro2"
-version = "1.0.85"
+version = "1.0.86"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "22244ce15aa966053a896d1accb3a6e68469b97c7f33f284b99f0d576879fc23"
+checksum = "5e719e8df665df0d1c8fbfd238015744736151d4445ec0836b8e628aae103b77"
 dependencies = [
  "unicode-ident",
 ]
 
+[[package]]
+name = "pyo3"
+version = "0.21.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "a5e00b96a521718e08e03b1a622f01c8a8deb50719335de3f60b3b3950f069d8"
+dependencies = [
+ "cfg-if",
+ "indoc",
+ "libc",
+ "memoffset",
+ "parking_lot 0.12.1",
+ "portable-atomic",
+ "pyo3-build-config",
+ "pyo3-ffi",
+ "pyo3-macros",
+ "unindent",
+]
+
+[[package]]
+name = "pyo3-build-config"
+version = "0.21.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7883df5835fafdad87c0d888b266c8ec0f4c9ca48a5bed6bbb592e8dedee1b50"
+dependencies = [
+ "once_cell",
+ "target-lexicon",
+]
+
+[[package]]
+name = "pyo3-ffi"
+version = "0.21.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "01be5843dc60b916ab4dad1dca6d20b9b4e6ddc8e15f50c47fe6d85f1fb97403"
+dependencies = [
+ "libc",
+ "pyo3-build-config",
+]
+
+[[package]]
+name = "pyo3-macros"
+version = "0.21.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "77b34069fc0682e11b31dbd10321cbf94808394c56fd996796ce45217dfac53c"
+dependencies = [
+ "proc-macro2",
+ "pyo3-macros-backend",
+ "quote",
+ "syn 2.0.67",
+]
+
+[[package]]
+name = "pyo3-macros-backend"
+version = "0.21.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "08260721f32db5e1a5beae69a55553f56b99bd0e1c3e6e0a5e8851a9d0f5a85c"
+dependencies = [
+ "heck 0.4.1",
+ "proc-macro2",
+ "pyo3-build-config",
+ "quote",
+ "syn 2.0.67",
+]
+
 [[package]]
 name = "quick-xml"
 version = "0.28.2"
@@ -2402,7 +2506,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "serde_derive_internals",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -2476,7 +2580,7 @@ checksum = "500cbc0ebeb6f46627f50f3f5811ccf6bf00643be300b4c3eabc0ef55dc5b5ba"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -2487,14 +2591,14 @@ checksum = "330f01ce65a3a5fe59a60c82f3c9a024b573b8a6e875bd233fe5f934e71d54e3"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
 name = "serde_json"
-version = "1.0.116"
+version = "1.0.117"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3e17db7126d17feb94eb3fad46bf1a96b034e8aacbc2e775fe81505f8b0b2813"
+checksum = "455182ea6142b14f93f4bc5320a2b31c1f266b66a4a5c858b013302a5d8cbfc3"
 dependencies = [
  "indexmap 2.2.5",
  "itoa",
@@ -2510,7 +2614,7 @@ checksum = "0b2e6b945e9d3df726b65d6ee24060aff8e3533d431f677a9695db04eff9dfdb"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -2524,14 +2628,14 @@ dependencies = [
 
 [[package]]
 name = "serde_tokenstream"
-version = "0.2.0"
+version = "0.2.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8a00ffd23fd882d096f09fcaae2a9de8329a328628e86027e049ee051dc1621f"
+checksum = "8790a7c3fe883e443eaa2af6f705952bc5d6e8671a220b9335c8cae92c037e74"
 dependencies = [
  "proc-macro2",
  "quote",
  "serde",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -2668,7 +2772,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "structmeta-derive",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -2679,7 +2783,7 @@ checksum = "152a0b65a590ff6c3da95cabe2353ee04e6167c896b28e3b14478c2636c922fc"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -2723,9 +2827,9 @@ dependencies = [
 
 [[package]]
 name = "syn"
-version = "2.0.66"
+version = "2.0.67"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c42f3f41a2de00b01c0aaad383c5a45241efc8b2d1eda5661812fda5f3cdcff5"
+checksum = "ff8655ed1d86f3af4ee3fd3263786bc14245ad17c4c7e85ba7187fb3ae028c90"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -2746,7 +2850,7 @@ checksum = "c8af7666ab7b6390ab78131fb5b0fce11d6b7a6951602017c35fa82800708971"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -2776,6 +2880,12 @@ version = "1.0.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "55937e1799185b12863d447f42597ed69d9928686b8d88a1df17376a097d8369"
 
+[[package]]
+name = "target-lexicon"
+version = "0.12.14"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "e1fc403891a21bcfb7c37834ba66a547a8f402146eba7265b5a6d88059c9ff2f"
+
 [[package]]
 name = "task-local-extensions"
 version = "0.1.4"
@@ -2823,7 +2933,7 @@ checksum = "46c3384250002a6d5af4d114f2845d37b57521033f30d5c3f46c4d70e1197533"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -2919,7 +3029,7 @@ checksum = "5f5ae998a069d4b5aba8ee9dad856af7d520c3699e6159b185c2acd48155d39a"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -3072,7 +3182,7 @@ checksum = "84fd902d4e0b9a4b27f2f440108dc034e1758628a9b702f8ec61ad66355422fa"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -3100,7 +3210,7 @@ checksum = "34704c8d6ebcbc939824180af020566b01a7c01f80641264eba0999f6c2b6be7"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -3157,10 +3267,12 @@ checksum = "e421abadd41a4225275504ea4d6566923418b7f05506fbc9c0fe86ba7396114b"
 
 [[package]]
 name = "ts-rs"
-version = "8.1.0"
-source = "git+https://github.com/Aleph-Alpha/ts-rs#be0349d5fb07a8ccab713887a61e90e3bc773c7a"
+version = "9.0.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "5e2dcf58e612adda9a83800731e8e4aba04d8a302b9029617b0b6e4b021d5357"
 dependencies = [
  "chrono",
+ "serde_json",
  "thiserror",
  "ts-rs-macros",
  "url",
@@ -3169,12 +3281,13 @@ dependencies = [
 
 [[package]]
 name = "ts-rs-macros"
-version = "8.1.0"
-source = "git+https://github.com/Aleph-Alpha/ts-rs#be0349d5fb07a8ccab713887a61e90e3bc773c7a"
+version = "9.0.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "cbdee324e50a7402416d9c25270d3df4241ed528af5d36dda18b6f219551c577"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
  "termcolor",
 ]
 
@@ -3258,6 +3371,12 @@ version = "0.1.11"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "e51733f11c9c4f72aa0c160008246859e340b00807569a0da0e7a1079b27ba85"
 
+[[package]]
+name = "unindent"
+version = "0.2.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "c7de7d73e1754487cb58364ee906a499937a0dfabd86bcb980fa99ec8c8fa2ce"
+
 [[package]]
 name = "untrusted"
 version = "0.9.0"
@@ -3266,9 +3385,9 @@ checksum = "8ecb6da28b8a351d773b68d5825ac39017e680750f980f3a1a85cd8dd28a47c1"
 
 [[package]]
 name = "url"
-version = "2.5.0"
+version = "2.5.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "31e6302e3bb753d46e83516cae55ae196fc0c309407cf11ab35cc51a4c2a4633"
+checksum = "22784dbdf76fdde8af1aeda5622b546b422b6fc585325248a2bf9f5e41e94d6c"
 dependencies = [
  "form_urlencoded",
  "idna",
@@ -3327,7 +3446,7 @@ dependencies = [
  "proc-macro-error",
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]
@@ -3388,7 +3507,7 @@ dependencies = [
  "once_cell",
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
  "wasm-bindgen-shared",
 ]
 
@@ -3423,7 +3542,7 @@ checksum = "e94f17b526d0a461a191c78ea52bbce64071ed5c04c9ffe424dcb38f74171bb7"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
  "wasm-bindgen-backend",
  "wasm-bindgen-shared",
 ]
@@ -3748,7 +3867,7 @@ checksum = "9ce1b18ccd8e73a9321186f97e46f9f04b778851177567b1975109d26a08d2a6"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.66",
+ "syn 2.0.67",
 ]
 
 [[package]]

src/wasm-lib/Cargo.toml

@@ -65,6 +65,7 @@ members = [
 	"derive-docs",
 	"kcl",
 	"kcl-macros",
+	"kcl-test-server",
 ]
 
 [workspace.dependencies]

src/wasm-lib/derive-docs/Cargo.toml

@@ -20,7 +20,7 @@ quote = "1"
 regex = "1.10"
 serde = { version = "1.0.203", features = ["derive"] }
 serde_tokenstream = "0.2"
-syn = { version = "2.0.66", features = ["full"] }
+syn = { version = "2.0.67", features = ["full"] }
 
 [dev-dependencies]
 anyhow = "1.0.86"

src/wasm-lib/kcl-macros/Cargo.toml

@@ -15,7 +15,7 @@ databake = "0.1.8"
 kcl-lib = { path = "../kcl" }
 proc-macro2 = "1"
 quote = "1"
-syn = { version = "2.0.66", features = ["full"] }
+syn = { version = "2.0.67", features = ["full"] }
 
 [dev-dependencies]
 pretty_assertions = "1.4.0"

src/wasm-lib/kcl-test-server/Cargo.toml

@@ -0,0 +1,15 @@
+[package]
+name = "kcl-test-server"
+description = "A test server for KCL"
+version = "0.1.0"
+edition = "2021"
+license = "MIT"
+
+[dependencies]
+anyhow = "1.0.86"
+hyper = { version = "0.14.29", features = ["server"] }
+kcl-lib = { version = "0.1.62", path = "../kcl" }
+pico-args = "0.5.0"
+serde = { version = "1.0.203", features = ["derive"] }
+serde_json = "1.0.117"
+tokio = { version = "1.38.0", features = ["macros", "rt-multi-thread"] }

src/wasm-lib/kcl-test-server/src/lib.rs

@@ -0,0 +1,207 @@
+//! Executes KCL programs.
+//! The server reuses the same engine session for each KCL program it receives.
+use std::{
+    net::SocketAddr,
+    sync::{
+        atomic::{AtomicUsize, Ordering},
+        Arc,
+    },
+    time::Duration,
+};
+
+use hyper::{
+    body::Bytes,
+    header::CONTENT_TYPE,
+    service::{make_service_fn, service_fn},
+    Body, Error, Response, Server,
+};
+use kcl_lib::{executor::ExecutorContext, settings::types::UnitLength, test_server::RequestBody};
+use tokio::{
+    sync::{mpsc, oneshot},
+    task::JoinHandle,
+    time::sleep,
+};
+
+#[derive(Debug)]
+pub struct ServerArgs {
+    /// What port this server should listen on.
+    pub listen_on: SocketAddr,
+    /// How many connections to establish with the engine.
+    pub num_engine_conns: u8,
+}
+
+impl ServerArgs {
+    pub fn parse(mut pargs: pico_args::Arguments) -> Result<Self, pico_args::Error> {
+        let args = ServerArgs {
+            listen_on: pargs
+                .opt_value_from_str("--listen-on")?
+                .unwrap_or("0.0.0.0:3333".parse().unwrap()),
+            num_engine_conns: pargs.opt_value_from_str("--num-engine-conns")?.unwrap_or(1),
+        };
+        println!("Config is {args:?}");
+        Ok(args)
+    }
+}
+
+/// Sent from the server to each worker.
+struct WorkerReq {
+    /// A KCL program, in UTF-8.
+    body: Bytes,
+    /// A channel to send the HTTP response back.
+    resp: oneshot::Sender<Response<Body>>,
+}
+
+/// Each worker has a connection to the engine, and accepts
+/// KCL programs. When it receives one (over the mpsc channel)
+/// it executes it and returns the result via a oneshot channel.
+fn start_worker(i: u8) -> mpsc::Sender<WorkerReq> {
+    println!("Starting worker {i}");
+    // Make a work queue for this worker.
+    let (tx, mut rx) = mpsc::channel(1);
+    tokio::task::spawn(async move {
+        let state = ExecutorContext::new_for_unit_test(UnitLength::Mm).await.unwrap();
+        println!("Worker {i} ready");
+        while let Some(req) = rx.recv().await {
+            let req: WorkerReq = req;
+            let resp = snapshot_endpoint(req.body, state.clone()).await;
+            if req.resp.send(resp).is_err() {
+                println!("\tWorker {i} exiting");
+            }
+        }
+        println!("\tWorker {i} exiting");
+    });
+    tx
+}
+
+struct ServerState {
+    workers: Vec<mpsc::Sender<WorkerReq>>,
+    req_num: AtomicUsize,
+}
+
+pub async fn start_server(args: ServerArgs) -> anyhow::Result<()> {
+    let ServerArgs {
+        listen_on,
+        num_engine_conns,
+    } = args;
+    let workers: Vec<_> = (0..num_engine_conns).map(start_worker).collect();
+    let state = Arc::new(ServerState {
+        workers,
+        req_num: 0.into(),
+    });
+    // In hyper, a `MakeService` is basically your server.
+    // It makes a `Service` for each connection, which manages the connection.
+    let make_service = make_service_fn(
+        // This closure is run for each connection.
+        move |_conn_info| {
+            // eprintln!("Connected to a client");
+            let state = state.clone();
+            async move {
+                // This is the `Service` which handles the connection.
+                // `service_fn` converts a function which returns a Response
+                // into a `Service`.
+                Ok::<_, Error>(service_fn(move |req| {
+                    // eprintln!("Received a request");
+                    let state = state.clone();
+                    async move { handle_request(req, state).await }
+                }))
+            }
+        },
+    );
+    let server = Server::bind(&listen_on).serve(make_service);
+    println!("Listening on {listen_on}");
+    println!("PID is {}", std::process::id());
+    if let Err(e) = server.await {
+        eprintln!("Server error: {e}");
+        return Err(e.into());
+    }
+    Ok(())
+}
+
+async fn handle_request(req: hyper::Request<Body>, state3: Arc<ServerState>) -> Result<Response<Body>, Error> {
+    let body = hyper::body::to_bytes(req.into_body()).await?;
+
+    // Round robin requests between each available worker.
+    let req_num = state3.req_num.fetch_add(1, Ordering::Relaxed);
+    let worker_id = req_num % state3.workers.len();
+    // println!("Sending request {req_num} to worker {worker_id}");
+    let worker = state3.workers[worker_id].clone();
+    let (tx, rx) = oneshot::channel();
+    let req_sent = worker.send(WorkerReq { body, resp: tx }).await;
+    req_sent.unwrap();
+    let resp = rx.await.unwrap();
+    Ok(resp)
+}
+
+/// Execute a KCL program, then respond with a PNG snapshot.
+/// KCL errors (from engine or the executor) respond with HTTP Bad Gateway.
+/// Malformed requests are HTTP Bad Request.
+/// Successful requests contain a PNG as the body.
+async fn snapshot_endpoint(body: Bytes, state: ExecutorContext) -> Response<Body> {
+    let body = match serde_json::from_slice::<RequestBody>(body.as_ref()) {
+        Ok(bd) => bd,
+        Err(e) => return bad_request(format!("Invalid request JSON: {e}")),
+    };
+    let RequestBody { kcl_program, test_name } = body;
+    let parser = match kcl_lib::token::lexer(&kcl_program) {
+        Ok(ts) => kcl_lib::parser::Parser::new(ts),
+        Err(e) => return bad_request(format!("tokenization error: {e}")),
+    };
+    let program = match parser.ast() {
+        Ok(pr) => pr,
+        Err(e) => return bad_request(format!("Parse error: {e}")),
+    };
+    eprintln!("Executing {test_name}");
+    if let Err(e) = state.reset_scene().await {
+        return kcl_err(e);
+    }
+    // Let users know if the test is taking a long time.
+    let (done_tx, done_rx) = oneshot::channel::<()>();
+    let timer = time_until(done_rx);
+    let snapshot = match state.execute_and_prepare_snapshot(program).await {
+        Ok(sn) => sn,
+        Err(e) => return kcl_err(e),
+    };
+    let _ = done_tx.send(());
+    timer.abort();
+    eprintln!("\tServing response");
+    let png_bytes = snapshot.contents.0;
+    let mut resp = Response::new(Body::from(png_bytes));
+    resp.headers_mut().insert(CONTENT_TYPE, "image/png".parse().unwrap());
+    resp
+}
+
+fn bad_request(msg: String) -> Response<Body> {
+    eprintln!("\tBad request");
+    let mut resp = Response::new(Body::from(msg));
+    *resp.status_mut() = hyper::StatusCode::BAD_REQUEST;
+    resp
+}
+
+fn bad_gateway(msg: String) -> Response<Body> {
+    eprintln!("\tBad gateway");
+    let mut resp = Response::new(Body::from(msg));
+    *resp.status_mut() = hyper::StatusCode::BAD_GATEWAY;
+    resp
+}
+
+fn kcl_err(err: anyhow::Error) -> Response<Body> {
+    eprintln!("\tBad KCL");
+    bad_gateway(format!("{err}"))
+}
+
+fn time_until(done: oneshot::Receiver<()>) -> JoinHandle<()> {
+    tokio::task::spawn(async move {
+        let period = 10;
+        tokio::pin!(done);
+        for i in 1..=3 {
+            tokio::select! {
+                biased;
+                // If the test is done, no need for this timer anymore.
+                _ = &mut done => return,
+                _ = sleep(Duration::from_secs(period)) => {
+                    eprintln!("\tTest has taken {}s", period * i);
+                },
+            };
+        }
+    })
+}

src/wasm-lib/kcl/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-lib"
 description = "KittyCAD Language implementation and tools"
-version = "0.1.60"
+version = "0.1.62"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"
@@ -28,6 +28,7 @@ kittycad = { workspace = true, features = ["clap"] }
 lazy_static = "1.4.0"
 mime_guess = "2.0.4"
 parse-display = "0.9.1"
+pyo3 = {version = "0.21.2", optional = true}
 reqwest = { version = "0.11.26", default-features = false, features = ["stream", "rustls-tls"] }
 ropey = "1.6.1"
 schemars = { version = "0.8.17", features = ["impl_json_schema", "url", "uuid1"] }
@@ -36,9 +37,8 @@ serde_json = "1.0.116"
 sha2 = "0.10.8"
 thiserror = "1.0.61"
 toml = "0.8.14"
-# TODO: change this to a cargo release once 8.1.1 comes out
-ts-rs = { git = "https://github.com/Aleph-Alpha/ts-rs", features = ["uuid-impl", "url-impl", "chrono-impl", "no-serde-warnings"] }
-url = { version = "2.5.0", features = ["serde"] }
+ts-rs = { version = "9.0.0", features = ["uuid-impl", "url-impl", "chrono-impl", "no-serde-warnings", "serde-json-impl"] }
+url = { version = "2.5.2", features = ["serde"] }
 uuid = { version = "1.8.0", features = ["v4", "js", "serde"] }
 validator = { version = "0.18.1", features = ["derive"] }
 winnow = "0.5.40"
@@ -62,7 +62,11 @@ tower-lsp = { version = "0.20.0", features = ["proposed"] }
 [features]
 default = ["cli", "engine"]
 cli = ["dep:clap"]
+# For the lsp server, when run with stdout for rpc we want to disable println.
+# This is used for editor extensions that use the lsp server.
+disable-println = []
 engine = []
+pyo3 = ["dep:pyo3"]
 
 [profile.release]
 panic = "abort"

src/wasm-lib/kcl/src/ast/types.rs

@@ -1,6 +1,11 @@
 //! Data types for the AST.
 
-use std::{collections::HashMap, fmt::Write, ops::RangeInclusive};
+use std::{
+    collections::HashMap,
+    fmt::Write,
+    ops::RangeInclusive,
+    sync::{Arc, Mutex},
+};
 
 use anyhow::Result;
 use databake::*;
@@ -147,6 +152,21 @@ impl Program {
         }
     }
 
+    /// Check the provided Program for any lint findings.
+    pub fn lint<'a, RuleT>(&'a self, rule: RuleT) -> Result<Vec<crate::lint::Discovered>>
+    where
+        RuleT: crate::lint::rule::Rule<'a>,
+    {
+        let v = Arc::new(Mutex::new(vec![]));
+        crate::lint::walk(self, &|node: crate::lint::Node<'a>| {
+            let mut findings = v.lock().map_err(|_| anyhow::anyhow!("mutex"))?;
+            findings.append(&mut rule.check(node)?);
+            Ok(true)
+        })?;
+        let x = v.lock().unwrap();
+        Ok(x.clone())
+    }
+
     /// Returns the body item that includes the given character position.
     pub fn get_body_item_for_position(&self, pos: usize) -> Option<&BodyItem> {
         for item in &self.body {
@@ -1076,7 +1096,12 @@ impl CallExpression {
 
     fn recast(&self, options: &FormatOptions, indentation_level: usize, is_in_pipe: bool) -> String {
         format!(
-            "{}({})",
+            "{}{}({})",
+            if is_in_pipe {
+                "".to_string()
+            } else {
+                options.get_indentation(indentation_level)
+            },
             self.callee.name,
             self.arguments
                 .iter()
@@ -1335,7 +1360,7 @@ impl VariableDeclaration {
                 indentation,
                 self.kind,
                 declaration.id.name,
-                declaration.init.recast(options, indentation_level, false)
+                declaration.init.recast(options, indentation_level, false).trim()
             );
             output
         })
@@ -1751,7 +1776,7 @@ impl ArrayExpression {
                 inner_indentation,
                 self.elements
                     .iter()
-                    .map(|el| el.recast(options, indentation_level, false))
+                    .map(|el| el.recast(options, indentation_level, is_in_pipe))
                     .collect::<Vec<String>>()
                     .join(format!(",\n{}", inner_indentation).as_str()),
                 if is_in_pipe {
@@ -2678,7 +2703,8 @@ impl PipeExpression {
     }
 
     fn recast(&self, options: &FormatOptions, indentation_level: usize) -> String {
-        self.body
+        let pipe = self
+            .body
             .iter()
             .enumerate()
             .map(|(index, statement)| {
@@ -2710,7 +2736,8 @@ impl PipeExpression {
                 }
                 s
             })
-            .collect::<String>()
+            .collect::<String>();
+        format!("{}{}", options.get_indentation(indentation_level), pipe)
     }
 
     /// Returns a hover value that includes the given character position.
@@ -2997,6 +3024,7 @@ pub enum Hover {
 
 /// Format options.
 #[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
+#[cfg_attr(feature = "pyo3", pyo3::pyclass)]
 #[ts(export)]
 #[serde(rename_all = "camelCase")]
 pub struct FormatOptions {
@@ -3265,6 +3293,132 @@ fn ghi = (x) => {
         assert_eq!(symbols.len(), 7);
     }
 
+    #[test]
+    fn test_recast_bug_fn_in_fn() {
+        let some_program_string = r#"// Start point (top left)
+const zoo_x = -20
+const zoo_y = 7
+// Scale
+const s = 1 // s = 1 -> height of Z is 13.4mm
+// Depth
+const d = 1
+
+fn rect = (x, y, w, h) => {
+  startSketchOn('XY')
+    |> startProfileAt([x, y], %)
+    |> xLine(w, %)
+    |> yLine(h, %)
+    |> xLine(-w, %)
+    |> close(%)
+    |> extrude(d, %)
+}
+
+fn quad = (x1, y1, x2, y2, x3, y3, x4, y4) => {
+  startSketchOn('XY')
+    |> startProfileAt([x1, y1], %)
+    |> lineTo([x2, y2], %)
+    |> lineTo([x3, y3], %)
+    |> lineTo([x4, y4], %)
+    |> close(%)
+    |> extrude(d, %)
+}
+
+fn crosshair = (x, y) => {
+  startSketchOn('XY')
+    |> startProfileAt([x, y], %)
+    |> yLine(1, %)
+    |> yLine(-2, %)
+    |> yLine(1, %)
+    |> xLine(1, %)
+    |> xLine(-2, %)
+}
+
+fn z = (z_x, z_y) => {
+  const z_end_w = s * 8.4
+  const z_end_h = s * 3
+  const z_corner = s * 2
+  const z_w = z_end_w + 2 * z_corner
+  const z_h = z_w * 1.08130081300813
+  rect(z_x, z_y, z_end_w, -z_end_h)
+  rect(z_x + z_w, z_y, -z_corner, -z_corner)
+  rect(z_x + z_w, z_y - z_h, -z_end_w, z_end_h)
+  rect(z_x, z_y - z_h, z_corner, z_corner)
+  quad(z_x, z_y - z_h + z_corner, z_x + z_w - z_corner, z_y, z_x + z_w, z_y - z_corner, z_x + z_corner, z_y - z_h)
+}
+
+fn o = (c_x, c_y) => {
+  // Outer and inner radii
+  const o_r = s * 6.95
+  const i_r = 0.5652173913043478 * o_r
+
+  // Angle offset for diagonal break
+  const a = 7
+
+  // Start point for the top sketch
+  const o_x1 = c_x + o_r * cos((45 + a) / 360 * tau())
+  const o_y1 = c_y + o_r * sin((45 + a) / 360 * tau())
+
+  // Start point for the bottom sketch
+  const o_x2 = c_x + o_r * cos((225 + a) / 360 * tau())
+  const o_y2 = c_y + o_r * sin((225 + a) / 360 * tau())
+
+  // End point for the bottom startSketchAt
+  const o_x3 = c_x + o_r * cos((45 - a) / 360 * tau())
+  const o_y3 = c_y + o_r * sin((45 - a) / 360 * tau())
+
+  // Where is the center?
+  // crosshair(c_x, c_y)
+
+
+  startSketchOn('XY')
+    |> startProfileAt([o_x1, o_y1], %)
+    |> arc({
+         radius: o_r,
+         angle_start: 45 + a,
+         angle_end: 225 - a
+       }, %)
+    |> angledLine([45, o_r - i_r], %)
+    |> arc({
+         radius: i_r,
+         angle_start: 225 - a,
+         angle_end: 45 + a
+       }, %)
+    |> close(%)
+    |> extrude(d, %)
+
+  startSketchOn('XY')
+    |> startProfileAt([o_x2, o_y2], %)
+    |> arc({
+         radius: o_r,
+         angle_start: 225 + a,
+         angle_end: 360 + 45 - a
+       }, %)
+    |> angledLine([225, o_r - i_r], %)
+    |> arc({
+         radius: i_r,
+         angle_start: 45 - a,
+         angle_end: 225 + a - 360
+       }, %)
+    |> close(%)
+    |> extrude(d, %)
+}
+
+fn zoo = (x0, y0) => {
+  z(x0, y0)
+  o(x0 + s * 20, y0 - (s * 6.7))
+  o(x0 + s * 35, y0 - (s * 6.7))
+}
+
+zoo(zoo_x, zoo_y)
+"#;
+        let tokens = crate::token::lexer(some_program_string).unwrap();
+        let parser = crate::parser::Parser::new(tokens);
+        let program = parser.ast().unwrap();
+
+        let recasted = program.recast(&Default::default(), 0);
+        assert_eq!(recasted, some_program_string);
+    }
+
     #[test]
     fn test_recast_bug_extra_parens() {
         let some_program_string = r#"// Ball Bearing
@@ -3332,8 +3486,6 @@ const outsideRevolve = startSketchOn('XZ')
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
 
-        println!("{:#?}", program);
-
         let recasted = program.recast(&Default::default(), 0);
         assert_eq!(
             recasted,
@@ -3656,7 +3808,6 @@ const tabs_l = startSketchOn({
         let tokens = crate::token::lexer(some_program_string).unwrap();
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
-        println!("{:#?}", program);
 
         let recasted = program.recast(&Default::default(), 0);
         // Its VERY important this comes back with zero new lines.