Make values match that of the pane container's inset

Bumps [ip](https://github.com/indutny/node-ip) from 1.1.8 to 1.1.9.
- [Commits](https://github.com/indutny/node-ip/compare/v1.1.8...v1.1.9)

---
updated-dependencies:
- dependency-name: ip
  dependency-type: indirect
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Pierre Jacquier <pierrejacquier39@gmail.com>

.github/workflows/announce_release.yml

@@ -1,29 +0,0 @@
-name: Announce Release
-
-on:
-  release:
-    types: [published]
-
-jobs:
-  announce_release:
-    runs-on: ubuntu-latest
-    steps:
-    - name: Check out code
-      uses: actions/checkout@v4
-
-    - name: Set up Python
-      uses: actions/setup-python@v5
-      with:
-        python-version: '3.x'
-
-    - name: Install dependencies
-      run: |
-        python -m pip install --upgrade pip
-        pip install requests
-
-    - name: Announce Release
-      env:
-        DISCORD_WEBHOOK_URL: ${{ secrets.DISCORD_WEBHOOK_URL }}
-        RELEASE_VERSION: ${{ github.event.release.tag_name }}
-        RELEASE_BODY: ${{ github.event.release.body}}
-      run: python public/announce_release.py

.github/workflows/ci.yml

@@ -86,8 +86,6 @@ jobs:
 
       - run: yarn test:nowatch
 
-      - run: yarn test:cov
-
 
   prepare-json-files:
     runs-on: ubuntu-latest  # seperate job on Ubuntu for easy string manipulations (compared to Windows)
@@ -372,3 +370,27 @@ jobs:
         uses: softprops/action-gh-release@v1
         with:
           files: 'artifact/*/Zoo*'
+          
+  announce_release:
+    needs: [publish-apps-release]
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+          
+      - name: Set up Python
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.x'
+  
+      - name: Install dependencies
+        run: |
+          python -m pip install --upgrade pip
+          pip install requests
+  
+      - name: Announce Release
+        env:
+          DISCORD_WEBHOOK_URL: ${{ secrets.DISCORD_WEBHOOK_URL }}
+          RELEASE_VERSION: ${{ github.event.release.tag_name }}
+          RELEASE_BODY: ${{ github.event.release.body}}
+        run: python public/announce_release.py

README.md

@@ -136,6 +136,11 @@ Before you submit a contribution PR to this repo, please ensure that:
 VERSION=x.y.z yarn run bump-jsons
 ```
 
+Alternatively you can try the experimental `make-release.sh` bash script that will create the branch with the updated json files for you.
+run `./make-release.sh` for a patch update
+run `./make-release.sh "minor"` for minor
+run `./make-release.sh "major"` for major
+
 The PR may serve as a place to discuss the human-readable changelog and extra QA. A quick way of getting PR's merged since the last bump is to [use this PR filter](https://github.com/KittyCAD/modeling-app/pulls?q=is%3Apr+sort%3Aupdated-desc+is%3Amerged+), open up the browser console and past in the following
 
 ```typescript

e2e/playwright/export-snapshots/step-.step

@@ -19,59 +19,59 @@ DATA;
 );
 #4 = CARTESIAN_POINT('NONE', (0, 0, -0));
 #5 = VERTEX_POINT('NONE', #4);
-#6 = CARTESIAN_POINT('NONE', (0, -0.0254, -0));
+#6 = CARTESIAN_POINT('NONE', (0, -0.64516, -0));
 #7 = VERTEX_POINT('NONE', #6);
-#8 = CARTESIAN_POINT('NONE', (0, -0.0254, 0.1016));
+#8 = CARTESIAN_POINT('NONE', (0, -0.64516, 2.58064));
 #9 = VERTEX_POINT('NONE', #8);
-#10 = CARTESIAN_POINT('NONE', (0, 0, 0.1016));
+#10 = CARTESIAN_POINT('NONE', (0, 0, 2.58064));
 #11 = VERTEX_POINT('NONE', #10);
-#12 = CARTESIAN_POINT('NONE', (0.07861346939195568, -0.0254, -0));
+#12 = CARTESIAN_POINT('NONE', (1.996782122555674, -0.64516, -0));
 #13 = VERTEX_POINT('NONE', #12);
-#14 = CARTESIAN_POINT('NONE', (0.07861346939195568, -0.0254, 0.1016));
+#14 = CARTESIAN_POINT('NONE', (1.996782122555674, -0.64516, 2.58064));
 #15 = VERTEX_POINT('NONE', #14);
-#16 = CARTESIAN_POINT('NONE', (0.1511633881344551, -0.07619999999999998, -0));
+#16 = CARTESIAN_POINT('NONE', (3.839550058615159, -1.9354799999999992, -0));
 #17 = VERTEX_POINT('NONE', #16);
-#18 = CARTESIAN_POINT('NONE', (0.1511633881344551, -0.07619999999999998, 0.1016));
+#18 = CARTESIAN_POINT('NONE', (3.839550058615159, -1.9354799999999992, 2.58064));
 #19 = VERTEX_POINT('NONE', #18);
-#20 = CARTESIAN_POINT('NONE', (0.2413, -0.0762, -0));
+#20 = CARTESIAN_POINT('NONE', (6.12902, -1.93548, -0));
 #21 = VERTEX_POINT('NONE', #20);
-#22 = CARTESIAN_POINT('NONE', (0.2413, -0.0762, 0.1016));
+#22 = CARTESIAN_POINT('NONE', (6.12902, -1.93548, 2.58064));
 #23 = VERTEX_POINT('NONE', #22);
-#24 = CARTESIAN_POINT('NONE', (0.2413, -0.0635, -0));
+#24 = CARTESIAN_POINT('NONE', (6.12902, -1.6129, -0));
 #25 = VERTEX_POINT('NONE', #24);
-#26 = CARTESIAN_POINT('NONE', (0.2413, -0.0635, 0.1016));
+#26 = CARTESIAN_POINT('NONE', (6.12902, -1.6129, 2.58064));
 #27 = VERTEX_POINT('NONE', #26);
-#28 = CARTESIAN_POINT('NONE', (0.1551676827532182, -0.0635, -0));
+#28 = CARTESIAN_POINT('NONE', (3.9412591419317424, -1.6129, -0));
 #29 = VERTEX_POINT('NONE', #28);
-#30 = CARTESIAN_POINT('NONE', (0.1551676827532182, -0.0635, 0.1016));
+#30 = CARTESIAN_POINT('NONE', (3.9412591419317424, -1.6129, 2.58064));
 #31 = VERTEX_POINT('NONE', #30);
-#32 = CARTESIAN_POINT('NONE', (0.06448028432509392, 0, -0));
+#32 = CARTESIAN_POINT('NONE', (1.6377992218573856, 0, -0));
 #33 = VERTEX_POINT('NONE', #32);
-#34 = CARTESIAN_POINT('NONE', (0.06448028432509392, 0, 0.1016));
+#34 = CARTESIAN_POINT('NONE', (1.6377992218573856, 0, 2.58064));
 #35 = VERTEX_POINT('NONE', #34);
-#36 = CARTESIAN_POINT('NONE', (0.14618599799650817, 0.03810000000000001, -0));
+#36 = CARTESIAN_POINT('NONE', (3.7131243491113075, 0.9677400000000002, -0));
 #37 = VERTEX_POINT('NONE', #36);
-#38 = CARTESIAN_POINT('NONE', (0.14618599799650817, 0.03810000000000001, 0.1016));
+#38 = CARTESIAN_POINT('NONE', (3.7131243491113075, 0.9677400000000002, 2.58064));
 #39 = VERTEX_POINT('NONE', #38);
-#40 = CARTESIAN_POINT('NONE', (0.2413, 0.0381, -0));
+#40 = CARTESIAN_POINT('NONE', (6.12902, 0.9677399999999998, -0));
 #41 = VERTEX_POINT('NONE', #40);
-#42 = CARTESIAN_POINT('NONE', (0.2413, 0.0381, 0.1016));
+#42 = CARTESIAN_POINT('NONE', (6.12902, 0.9677399999999998, 2.58064));
 #43 = VERTEX_POINT('NONE', #42);
-#44 = CARTESIAN_POINT('NONE', (0.2413, 0.0508, -0));
+#44 = CARTESIAN_POINT('NONE', (6.12902, 1.29032, -0));
 #45 = VERTEX_POINT('NONE', #44);
-#46 = CARTESIAN_POINT('NONE', (0.2413, 0.0508, 0.1016));
+#46 = CARTESIAN_POINT('NONE', (6.12902, 1.29032, 2.58064));
 #47 = VERTEX_POINT('NONE', #46);
-#48 = CARTESIAN_POINT('NONE', (0.14337047578094278, 0.0508, -0));
+#48 = CARTESIAN_POINT('NONE', (3.6416100848359463, 1.29032, -0));
 #49 = VERTEX_POINT('NONE', #48);
-#50 = CARTESIAN_POINT('NONE', (0.14337047578094278, 0.0508, 0.1016));
+#50 = CARTESIAN_POINT('NONE', (3.6416100848359463, 1.29032, 2.58064));
 #51 = VERTEX_POINT('NONE', #50);
-#52 = CARTESIAN_POINT('NONE', (0.08889999999999999, 0.0254, -0));
+#52 = CARTESIAN_POINT('NONE', (2.2580599999999995, 0.64516, -0));
 #53 = VERTEX_POINT('NONE', #52);
-#54 = CARTESIAN_POINT('NONE', (0.08889999999999999, 0.0254, 0.1016));
+#54 = CARTESIAN_POINT('NONE', (2.2580599999999995, 0.64516, 2.58064));
 #55 = VERTEX_POINT('NONE', #54);
-#56 = CARTESIAN_POINT('NONE', (0, 0.0254, -0));
+#56 = CARTESIAN_POINT('NONE', (0, 0.64516, -0));
 #57 = VERTEX_POINT('NONE', #56);
-#58 = CARTESIAN_POINT('NONE', (0, 0.0254, 0.1016));
+#58 = CARTESIAN_POINT('NONE', (0, 0.64516, 2.58064));
 #59 = VERTEX_POINT('NONE', #58);
 #60 = DIRECTION('NONE', (0, -1, 0));
 #61 = VECTOR('NONE', #60, 1);
@@ -79,11 +79,11 @@ DATA;
 #63 = LINE('NONE', #62, #61);
 #64 = DIRECTION('NONE', (0, 0, 1));
 #65 = VECTOR('NONE', #64, 1);
-#66 = CARTESIAN_POINT('NONE', (0, -0.0254, -0));
+#66 = CARTESIAN_POINT('NONE', (0, -0.64516, -0));
 #67 = LINE('NONE', #66, #65);
 #68 = DIRECTION('NONE', (0, -1, 0));
 #69 = VECTOR('NONE', #68, 1);
-#70 = CARTESIAN_POINT('NONE', (0, 0, 0.1016));
+#70 = CARTESIAN_POINT('NONE', (0, 0, 2.58064));
 #71 = LINE('NONE', #70, #69);
 #72 = DIRECTION('NONE', (0, 0, 1));
 #73 = VECTOR('NONE', #72, 1);
@@ -91,155 +91,155 @@ DATA;
 #75 = LINE('NONE', #74, #73);
 #76 = DIRECTION('NONE', (1, 0, 0));
 #77 = VECTOR('NONE', #76, 1);
-#78 = CARTESIAN_POINT('NONE', (0, -0.0254, -0));
+#78 = CARTESIAN_POINT('NONE', (0, -0.64516, -0));
 #79 = LINE('NONE', #78, #77);
 #80 = DIRECTION('NONE', (0, 0, 1));
 #81 = VECTOR('NONE', #80, 1);
-#82 = CARTESIAN_POINT('NONE', (0.07861346939195568, -0.0254, -0));
+#82 = CARTESIAN_POINT('NONE', (1.996782122555674, -0.64516, -0));
 #83 = LINE('NONE', #82, #81);
 #84 = DIRECTION('NONE', (1, 0, 0));
 #85 = VECTOR('NONE', #84, 1);
-#86 = CARTESIAN_POINT('NONE', (0, -0.0254, 0.1016));
+#86 = CARTESIAN_POINT('NONE', (0, -0.64516, 2.58064));
 #87 = LINE('NONE', #86, #85);
-#88 = DIRECTION('NONE', (0.8191520442889919, -0.5735764363510459, 0));
+#88 = DIRECTION('NONE', (0.819152044288992, -0.5735764363510459, 0));
 #89 = VECTOR('NONE', #88, 1);
-#90 = CARTESIAN_POINT('NONE', (0.07861346939195568, -0.0254, -0));
+#90 = CARTESIAN_POINT('NONE', (1.996782122555674, -0.64516, -0));
 #91 = LINE('NONE', #90, #89);
 #92 = DIRECTION('NONE', (0, 0, 1));
 #93 = VECTOR('NONE', #92, 1);
-#94 = CARTESIAN_POINT('NONE', (0.1511633881344551, -0.07619999999999998, -0));
+#94 = CARTESIAN_POINT('NONE', (3.839550058615159, -1.9354799999999992, -0));
 #95 = LINE('NONE', #94, #93);
-#96 = DIRECTION('NONE', (0.8191520442889919, -0.5735764363510459, 0));
+#96 = DIRECTION('NONE', (0.819152044288992, -0.5735764363510459, 0));
 #97 = VECTOR('NONE', #96, 1);
-#98 = CARTESIAN_POINT('NONE', (0.07861346939195568, -0.0254, 0.1016));
+#98 = CARTESIAN_POINT('NONE', (1.996782122555674, -0.64516, 2.58064));
 #99 = LINE('NONE', #98, #97);
-#100 = DIRECTION('NONE', (1, -0.0000000000000003079278779307945, 0));
+#100 = DIRECTION('NONE', (1, -0.00000000000000038794063361359933, 0));
 #101 = VECTOR('NONE', #100, 1);
-#102 = CARTESIAN_POINT('NONE', (0.1511633881344551, -0.07619999999999998, -0));
+#102 = CARTESIAN_POINT('NONE', (3.839550058615159, -1.9354799999999992, -0));
 #103 = LINE('NONE', #102, #101);
 #104 = DIRECTION('NONE', (0, 0, 1));
 #105 = VECTOR('NONE', #104, 1);
-#106 = CARTESIAN_POINT('NONE', (0.2413, -0.0762, -0));
+#106 = CARTESIAN_POINT('NONE', (6.12902, -1.93548, -0));
 #107 = LINE('NONE', #106, #105);
-#108 = DIRECTION('NONE', (1, -0.0000000000000003079278779307945, 0));
+#108 = DIRECTION('NONE', (1, -0.00000000000000038794063361359933, 0));
 #109 = VECTOR('NONE', #108, 1);
-#110 = CARTESIAN_POINT('NONE', (0.1511633881344551, -0.07619999999999998, 0.1016));
+#110 = CARTESIAN_POINT('NONE', (3.839550058615159, -1.9354799999999992, 2.58064));
 #111 = LINE('NONE', #110, #109);
 #112 = DIRECTION('NONE', (0, 1, 0));
 #113 = VECTOR('NONE', #112, 1);
-#114 = CARTESIAN_POINT('NONE', (0.2413, -0.0762, -0));
+#114 = CARTESIAN_POINT('NONE', (6.12902, -1.93548, -0));
 #115 = LINE('NONE', #114, #113);
 #116 = DIRECTION('NONE', (0, 0, 1));
 #117 = VECTOR('NONE', #116, 1);
-#118 = CARTESIAN_POINT('NONE', (0.2413, -0.0635, -0));
+#118 = CARTESIAN_POINT('NONE', (6.12902, -1.6129, -0));
 #119 = LINE('NONE', #118, #117);
 #120 = DIRECTION('NONE', (0, 1, 0));
 #121 = VECTOR('NONE', #120, 1);
-#122 = CARTESIAN_POINT('NONE', (0.2413, -0.0762, 0.1016));
+#122 = CARTESIAN_POINT('NONE', (6.12902, -1.93548, 2.58064));
 #123 = LINE('NONE', #122, #121);
 #124 = DIRECTION('NONE', (-1, 0, 0));
 #125 = VECTOR('NONE', #124, 1);
-#126 = CARTESIAN_POINT('NONE', (0.2413, -0.0635, -0));
+#126 = CARTESIAN_POINT('NONE', (6.12902, -1.6129, -0));
 #127 = LINE('NONE', #126, #125);
 #128 = DIRECTION('NONE', (0, 0, 1));
 #129 = VECTOR('NONE', #128, 1);
-#130 = CARTESIAN_POINT('NONE', (0.1551676827532182, -0.0635, -0));
+#130 = CARTESIAN_POINT('NONE', (3.9412591419317424, -1.6129, -0));
 #131 = LINE('NONE', #130, #129);
 #132 = DIRECTION('NONE', (-1, 0, 0));
 #133 = VECTOR('NONE', #132, 1);
-#134 = CARTESIAN_POINT('NONE', (0.2413, -0.0635, 0.1016));
+#134 = CARTESIAN_POINT('NONE', (6.12902, -1.6129, 2.58064));
 #135 = LINE('NONE', #134, #133);
 #136 = DIRECTION('NONE', (-0.8191520442889919, 0.573576436351046, 0));
 #137 = VECTOR('NONE', #136, 1);
-#138 = CARTESIAN_POINT('NONE', (0.1551676827532182, -0.0635, -0));
+#138 = CARTESIAN_POINT('NONE', (3.9412591419317424, -1.6129, -0));
 #139 = LINE('NONE', #138, #137);
 #140 = DIRECTION('NONE', (0, 0, 1));
 #141 = VECTOR('NONE', #140, 1);
-#142 = CARTESIAN_POINT('NONE', (0.06448028432509392, 0, -0));
+#142 = CARTESIAN_POINT('NONE', (1.6377992218573856, 0, -0));
 #143 = LINE('NONE', #142, #141);
 #144 = DIRECTION('NONE', (-0.8191520442889919, 0.573576436351046, 0));
 #145 = VECTOR('NONE', #144, 1);
-#146 = CARTESIAN_POINT('NONE', (0.1551676827532182, -0.0635, 0.1016));
+#146 = CARTESIAN_POINT('NONE', (3.9412591419317424, -1.6129, 2.58064));
 #147 = LINE('NONE', #146, #145);
-#148 = DIRECTION('NONE', (0.90630778703665, 0.4226182617406993, 0));
+#148 = DIRECTION('NONE', (0.90630778703665, 0.4226182617406992, 0));
 #149 = VECTOR('NONE', #148, 1);
-#150 = CARTESIAN_POINT('NONE', (0.06448028432509392, 0, -0));
+#150 = CARTESIAN_POINT('NONE', (1.6377992218573856, 0, -0));
 #151 = LINE('NONE', #150, #149);
 #152 = DIRECTION('NONE', (0, 0, 1));
 #153 = VECTOR('NONE', #152, 1);
-#154 = CARTESIAN_POINT('NONE', (0.14618599799650817, 0.03810000000000001, -0));
+#154 = CARTESIAN_POINT('NONE', (3.7131243491113075, 0.9677400000000002, -0));
 #155 = LINE('NONE', #154, #153);
-#156 = DIRECTION('NONE', (0.90630778703665, 0.4226182617406993, 0));
+#156 = DIRECTION('NONE', (0.90630778703665, 0.4226182617406992, 0));
 #157 = VECTOR('NONE', #156, 1);
-#158 = CARTESIAN_POINT('NONE', (0.06448028432509392, 0, 0.1016));
+#158 = CARTESIAN_POINT('NONE', (1.6377992218573856, 0, 2.58064));
 #159 = LINE('NONE', #158, #157);
-#160 = DIRECTION('NONE', (1, -0.00000000000000007295344279228718, 0));
+#160 = DIRECTION('NONE', (1, -0.0000000000000001378647737807002, 0));
 #161 = VECTOR('NONE', #160, 1);
-#162 = CARTESIAN_POINT('NONE', (0.14618599799650817, 0.03810000000000001, -0));
+#162 = CARTESIAN_POINT('NONE', (3.7131243491113075, 0.9677400000000002, -0));
 #163 = LINE('NONE', #162, #161);
 #164 = DIRECTION('NONE', (0, 0, 1));
 #165 = VECTOR('NONE', #164, 1);
-#166 = CARTESIAN_POINT('NONE', (0.2413, 0.0381, -0));
+#166 = CARTESIAN_POINT('NONE', (6.12902, 0.9677399999999998, -0));
 #167 = LINE('NONE', #166, #165);
-#168 = DIRECTION('NONE', (1, -0.00000000000000007295344279228718, 0));
+#168 = DIRECTION('NONE', (1, -0.0000000000000001378647737807002, 0));
 #169 = VECTOR('NONE', #168, 1);
-#170 = CARTESIAN_POINT('NONE', (0.14618599799650817, 0.03810000000000001, 0.1016));
+#170 = CARTESIAN_POINT('NONE', (3.7131243491113075, 0.9677400000000002, 2.58064));
 #171 = LINE('NONE', #170, #169);
 #172 = DIRECTION('NONE', (0, 1, 0));
 #173 = VECTOR('NONE', #172, 1);
-#174 = CARTESIAN_POINT('NONE', (0.2413, 0.0381, -0));
+#174 = CARTESIAN_POINT('NONE', (6.12902, 0.9677399999999998, -0));
 #175 = LINE('NONE', #174, #173);
 #176 = DIRECTION('NONE', (0, 0, 1));
 #177 = VECTOR('NONE', #176, 1);
-#178 = CARTESIAN_POINT('NONE', (0.2413, 0.0508, -0));
+#178 = CARTESIAN_POINT('NONE', (6.12902, 1.29032, -0));
 #179 = LINE('NONE', #178, #177);
 #180 = DIRECTION('NONE', (0, 1, 0));
 #181 = VECTOR('NONE', #180, 1);
-#182 = CARTESIAN_POINT('NONE', (0.2413, 0.0381, 0.1016));
+#182 = CARTESIAN_POINT('NONE', (6.12902, 0.9677399999999998, 2.58064));
 #183 = LINE('NONE', #182, #181);
 #184 = DIRECTION('NONE', (-1, 0, 0));
 #185 = VECTOR('NONE', #184, 1);
-#186 = CARTESIAN_POINT('NONE', (0.2413, 0.0508, -0));
+#186 = CARTESIAN_POINT('NONE', (6.12902, 1.29032, -0));
 #187 = LINE('NONE', #186, #185);
 #188 = DIRECTION('NONE', (0, 0, 1));
 #189 = VECTOR('NONE', #188, 1);
-#190 = CARTESIAN_POINT('NONE', (0.14337047578094278, 0.0508, -0));
+#190 = CARTESIAN_POINT('NONE', (3.6416100848359463, 1.29032, -0));
 #191 = LINE('NONE', #190, #189);
 #192 = DIRECTION('NONE', (-1, 0, 0));
 #193 = VECTOR('NONE', #192, 1);
-#194 = CARTESIAN_POINT('NONE', (0.2413, 0.0508, 0.1016));
+#194 = CARTESIAN_POINT('NONE', (6.12902, 1.29032, 2.58064));
 #195 = LINE('NONE', #194, #193);
-#196 = DIRECTION('NONE', (-0.90630778703665, -0.42261826174069944, 0));
+#196 = DIRECTION('NONE', (-0.90630778703665, -0.4226182617406995, 0));
 #197 = VECTOR('NONE', #196, 1);
-#198 = CARTESIAN_POINT('NONE', (0.14337047578094278, 0.0508, -0));
+#198 = CARTESIAN_POINT('NONE', (3.6416100848359463, 1.29032, -0));
 #199 = LINE('NONE', #198, #197);
 #200 = DIRECTION('NONE', (0, 0, 1));
 #201 = VECTOR('NONE', #200, 1);
-#202 = CARTESIAN_POINT('NONE', (0.08889999999999999, 0.0254, -0));
+#202 = CARTESIAN_POINT('NONE', (2.2580599999999995, 0.64516, -0));
 #203 = LINE('NONE', #202, #201);
-#204 = DIRECTION('NONE', (-0.90630778703665, -0.42261826174069944, 0));
+#204 = DIRECTION('NONE', (-0.90630778703665, -0.4226182617406995, 0));
 #205 = VECTOR('NONE', #204, 1);
-#206 = CARTESIAN_POINT('NONE', (0.14337047578094278, 0.0508, 0.1016));
+#206 = CARTESIAN_POINT('NONE', (3.6416100848359463, 1.29032, 2.58064));
 #207 = LINE('NONE', #206, #205);
 #208 = DIRECTION('NONE', (-1, 0, 0));
 #209 = VECTOR('NONE', #208, 1);
-#210 = CARTESIAN_POINT('NONE', (0.08889999999999999, 0.0254, -0));
+#210 = CARTESIAN_POINT('NONE', (2.2580599999999995, 0.64516, -0));
 #211 = LINE('NONE', #210, #209);
 #212 = DIRECTION('NONE', (0, 0, 1));
 #213 = VECTOR('NONE', #212, 1);
-#214 = CARTESIAN_POINT('NONE', (0, 0.0254, -0));
+#214 = CARTESIAN_POINT('NONE', (0, 0.64516, -0));
 #215 = LINE('NONE', #214, #213);
 #216 = DIRECTION('NONE', (-1, 0, 0));
 #217 = VECTOR('NONE', #216, 1);
-#218 = CARTESIAN_POINT('NONE', (0.08889999999999999, 0.0254, 0.1016));
+#218 = CARTESIAN_POINT('NONE', (2.2580599999999995, 0.64516, 2.58064));
 #219 = LINE('NONE', #218, #217);
 #220 = DIRECTION('NONE', (0, -1, 0));
 #221 = VECTOR('NONE', #220, 1);
-#222 = CARTESIAN_POINT('NONE', (0, 0.0254, -0));
+#222 = CARTESIAN_POINT('NONE', (0, 0.64516, -0));
 #223 = LINE('NONE', #222, #221);
 #224 = DIRECTION('NONE', (0, -1, 0));
 #225 = VECTOR('NONE', #224, 1);
-#226 = CARTESIAN_POINT('NONE', (0, 0.0254, 0.1016));
+#226 = CARTESIAN_POINT('NONE', (0, 0.64516, 2.58064));
 #227 = LINE('NONE', #226, #225);
 #228 = EDGE_CURVE('NONE', #5, #7, #63, .T.);
 #229 = EDGE_CURVE('NONE', #7, #9, #67, .T.);
@@ -383,59 +383,59 @@ DATA;
 #367 = ORIENTED_EDGE('NONE', *, *, #267, .T.);
 #368 = ORIENTED_EDGE('NONE', *, *, #269, .T.);
 #369 = EDGE_LOOP('NONE', (#355, #356, #357, #358, #359, #360, #361, #362, #363, #364, #365, #366, #367, #368));
-#370 = CARTESIAN_POINT('NONE', (0, -0.0127, 0.0508));
+#370 = CARTESIAN_POINT('NONE', (0, -0.3225799999999985, 1.2903199999999995));
 #371 = DIRECTION('NONE', (-1, -0, 0));
 #372 = AXIS2_PLACEMENT_3D('NONE', #370, #371, $);
 #373 = PLANE('NONE', #372);
-#374 = CARTESIAN_POINT('NONE', (0.039306734695977924, -0.025399999999999995, 0.0508));
+#374 = CARTESIAN_POINT('NONE', (0.9983910612778368, -0.6451599999999998, 1.2903199999999997));
 #375 = DIRECTION('NONE', (0, -1, 0));
 #376 = AXIS2_PLACEMENT_3D('NONE', #374, #375, $);
 #377 = PLANE('NONE', #376);
-#378 = CARTESIAN_POINT('NONE', (0.11488842876320533, -0.05079999999999996, 0.05079999999999999));
+#378 = CARTESIAN_POINT('NONE', (2.918166090585415, -1.2903199999999988, 1.2903199999999997));
 #379 = DIRECTION('NONE', (-0.5735764363510459, -0.8191520442889919, 0));
 #380 = AXIS2_PLACEMENT_3D('NONE', #378, #379, $);
 #381 = PLANE('NONE', #380);
-#382 = CARTESIAN_POINT('NONE', (0.19623169406722757, -0.07619999999999999, 0.0508));
+#382 = CARTESIAN_POINT('NONE', (4.984285029307579, -1.9354799999999992, 1.2903199999999997));
 #383 = DIRECTION('NONE', (0, -1, 0));
 #384 = AXIS2_PLACEMENT_3D('NONE', #382, #383, $);
 #385 = PLANE('NONE', #384);
-#386 = CARTESIAN_POINT('NONE', (0.2413, -0.06985, 0.0508));
+#386 = CARTESIAN_POINT('NONE', (6.129019999999999, -1.7741899999999997, 1.2903199999999997));
 #387 = DIRECTION('NONE', (1, -0, 0));
 #388 = AXIS2_PLACEMENT_3D('NONE', #386, #387, $);
 #389 = PLANE('NONE', #388);
-#390 = CARTESIAN_POINT('NONE', (0.19823384137660915, -0.0635, 0.0508));
+#390 = CARTESIAN_POINT('NONE', (5.035139570965871, -1.6128999999999998, 1.2903199999999997));
 #391 = DIRECTION('NONE', (0, 1, -0));
 #392 = AXIS2_PLACEMENT_3D('NONE', #390, #391, $);
 #393 = PLANE('NONE', #392);
-#394 = CARTESIAN_POINT('NONE', (0.10982398353915601, -0.03174999999999997, 0.0508));
-#395 = DIRECTION('NONE', (0.5735764363510459, 0.8191520442889917, -0));
+#394 = CARTESIAN_POINT('NONE', (2.7895291818945633, -0.8064499999999998, 1.2903199999999995));
+#395 = DIRECTION('NONE', (0.5735764363510459, 0.8191520442889918, -0));
 #396 = AXIS2_PLACEMENT_3D('NONE', #394, #395, $);
 #397 = PLANE('NONE', #396);
-#398 = CARTESIAN_POINT('NONE', (0.105333141160801, 0.019049999999999987, 0.0508));
-#399 = DIRECTION('NONE', (0.4226182617406993, -0.90630778703665, 0));
+#398 = CARTESIAN_POINT('NONE', (2.6754617854843468, 0.4838700000000003, 1.2903199999999997));
+#399 = DIRECTION('NONE', (0.4226182617406992, -0.90630778703665, 0));
 #400 = AXIS2_PLACEMENT_3D('NONE', #398, #399, $);
 #401 = PLANE('NONE', #400);
-#402 = CARTESIAN_POINT('NONE', (0.19374299899825406, 0.0381, 0.0508));
+#402 = CARTESIAN_POINT('NONE', (4.921072174555653, 0.9677399999999998, 1.2903199999999995));
 #403 = DIRECTION('NONE', (0, -1, 0));
 #404 = AXIS2_PLACEMENT_3D('NONE', #402, #403, $);
 #405 = PLANE('NONE', #404);
-#406 = CARTESIAN_POINT('NONE', (0.2413, 0.044449999999999996, 0.0508));
+#406 = CARTESIAN_POINT('NONE', (6.129019999999998, 1.1290299999999989, 1.2903199999999995));
 #407 = DIRECTION('NONE', (1, -0, 0));
 #408 = AXIS2_PLACEMENT_3D('NONE', #406, #407, $);
 #409 = PLANE('NONE', #408);
-#410 = CARTESIAN_POINT('NONE', (0.19233523789047138, 0.0508, 0.0508));
+#410 = CARTESIAN_POINT('NONE', (4.8853150424179725, 1.2903199999999997, 1.2903199999999997));
 #411 = DIRECTION('NONE', (0, 1, -0));
 #412 = AXIS2_PLACEMENT_3D('NONE', #410, #411, $);
 #413 = PLANE('NONE', #412);
-#414 = CARTESIAN_POINT('NONE', (0.11613523789047137, 0.0381, 0.05079999999999999));
-#415 = DIRECTION('NONE', (-0.42261826174069966, 0.90630778703665, -0));
+#414 = CARTESIAN_POINT('NONE', (2.9498350424179733, 0.9677399999999998, 1.2903199999999997));
+#415 = DIRECTION('NONE', (-0.42261826174069933, 0.9063077870366499, -0));
 #416 = AXIS2_PLACEMENT_3D('NONE', #414, #415, $);
 #417 = PLANE('NONE', #416);
-#418 = CARTESIAN_POINT('NONE', (0.044449999999999996, 0.0254, 0.0508));
+#418 = CARTESIAN_POINT('NONE', (1.1290299999999998, 0.6451599999999998, 1.29032));
 #419 = DIRECTION('NONE', (0, 1, -0));
 #420 = AXIS2_PLACEMENT_3D('NONE', #418, #419, $);
 #421 = PLANE('NONE', #420);
-#422 = CARTESIAN_POINT('NONE', (0, 0.0127, 0.0508));
+#422 = CARTESIAN_POINT('NONE', (0, 0.32257999999999987, 1.2903199999999995));
 #423 = DIRECTION('NONE', (-1, -0, 0));
 #424 = AXIS2_PLACEMENT_3D('NONE', #422, #423, $);
 #425 = PLANE('NONE', #424);
@@ -443,7 +443,7 @@ DATA;
 #427 = DIRECTION('NONE', (0, 0, 1));
 #428 = AXIS2_PLACEMENT_3D('NONE', #426, #427, $);
 #429 = PLANE('NONE', #428);
-#430 = CARTESIAN_POINT('NONE', (0, 0, 0.1016));
+#430 = CARTESIAN_POINT('NONE', (0, 0, 2.58064));
 #431 = DIRECTION('NONE', (0, 0, 1));
 #432 = AXIS2_PLACEMENT_3D('NONE', #430, #431, $);
 #433 = PLANE('NONE', #432);

e2e/playwright/export-snapshots/stl-ascii.stl

@@ -1,478 +1,478 @@
 solid unnamed
 facet normal -1 0 0
     outer loop
-        vertex 0 -4 0
+        vertex 0 -101.600006 0
         vertex 0 -0 0
-        vertex 0 -4 -1
+        vertex 0 -101.600006 -25.400002
     endloop
 endfacet
 facet normal -1 0 0
     outer loop
-        vertex 0 -4 -1
+        vertex 0 -101.600006 -25.400002
         vertex 0 -0 0
-        vertex 0 -0 -1
+        vertex 0 -0 -25.400002
     endloop
 endfacet
 facet normal 0 0 -1
     outer loop
-        vertex 0 -4 -1
-        vertex 0 -0 -1
-        vertex 3.0950184 -4 -1
+        vertex 0 -101.600006 -25.400002
+        vertex 0 -0 -25.400002
+        vertex 78.613464 -101.600006 -25.400002
     endloop
 endfacet
 facet normal 0 0 -1
     outer loop
-        vertex 3.0950184 -4 -1
-        vertex 0 -0 -1
-        vertex 3.0950184 -0 -1
+        vertex 78.613464 -101.600006 -25.400002
+        vertex 0 -0 -25.400002
+        vertex 78.613464 -0 -25.400002
     endloop
 endfacet
-facet normal -0.57357645 0 -0.81915206
+facet normal -0.5735764 0 -0.8191522
     outer loop
-        vertex 3.0950184 -4 -1
-        vertex 3.0950184 -0 -1
-        vertex 5.9513144 -4 -3
+        vertex 78.613464 -101.600006 -25.400002
+        vertex 78.613464 -0 -25.400002
+        vertex 151.16339 -101.600006 -76.2
     endloop
 endfacet
-facet normal -0.57357645 0 -0.81915206
+facet normal -0.5735764 0 -0.8191522
     outer loop
-        vertex 5.9513144 -4 -3
-        vertex 3.0950184 -0 -1
-        vertex 5.9513144 -0 -3
+        vertex 151.16339 -101.600006 -76.2
+        vertex 78.613464 -0 -25.400002
+        vertex 151.16339 -0 -76.2
     endloop
 endfacet
 facet normal 0 0 -1
     outer loop
-        vertex 5.9513144 -4 -3
-        vertex 5.9513144 -0 -3
-        vertex 9.5 -4 -3
+        vertex 151.16339 -101.600006 -76.2
+        vertex 151.16339 -0 -76.2
+        vertex 241.3 -101.600006 -76.2
     endloop
 endfacet
 facet normal 0 0 -1
     outer loop
-        vertex 9.5 -4 -3
-        vertex 5.9513144 -0 -3
-        vertex 9.5 -0 -3
+        vertex 241.3 -101.600006 -76.2
+        vertex 151.16339 -0 -76.2
+        vertex 241.3 -0 -76.2
     endloop
 endfacet
 facet normal 1 0 0
     outer loop
-        vertex 9.5 -4 -3
-        vertex 9.5 -0 -3
-        vertex 9.5 -4 -2.5
+        vertex 241.3 -101.600006 -76.2
+        vertex 241.3 -0 -76.2
+        vertex 241.3 -101.600006 -63.5
     endloop
 endfacet
 facet normal 1 -0 0
     outer loop
-        vertex 9.5 -4 -2.5
-        vertex 9.5 -0 -3
-        vertex 9.5 -0 -2.5
+        vertex 241.3 -101.600006 -63.5
+        vertex 241.3 -0 -76.2
+        vertex 241.3 -0 -63.5
+    endloop
+endfacet
+facet normal 0 -0 1
+    outer loop
+        vertex 241.3 -101.600006 -63.5
+        vertex 241.3 -0 -63.5
+        vertex 155.16768 -101.600006 -63.5
+    endloop
+endfacet
+facet normal 0 0 1
+    outer loop
+        vertex 155.16768 -101.600006 -63.5
+        vertex 241.3 -0 -63.5
+        vertex 155.16768 -0 -63.5
+    endloop
+endfacet
+facet normal 0.5735765 0 0.81915194
+    outer loop
+        vertex 87.15214 -101.600006 -15.875
+        vertex 109.82398 -101.600006 -31.75
+        vertex 109.82398 -0 -31.75
+    endloop
+endfacet
+facet normal 0.57357645 0 0.819152
+    outer loop
+        vertex 109.82398 -101.600006 -31.75
+        vertex 155.16768 -101.600006 -63.5
+        vertex 155.16768 -0 -63.5
+    endloop
+endfacet
+facet normal 0.57357645 0 0.81915206
+    outer loop
+        vertex 87.15214 -0 -15.875
+        vertex 64.480286 -101.600006 0
+        vertex 87.15214 -101.600006 -15.875
+    endloop
+endfacet
+facet normal 0.5735765 0 0.81915194
+    outer loop
+        vertex 109.82398 -0 -31.75
+        vertex 87.15214 -0 -15.875
+        vertex 87.15214 -101.600006 -15.875
+    endloop
+endfacet
+facet normal 0.57357645 -0 0.819152
+    outer loop
+        vertex 109.82398 -101.600006 -31.75
+        vertex 155.16768 -0 -63.5
+        vertex 109.82398 -0 -31.75
+    endloop
+endfacet
+facet normal 0.57357645 -0 0.81915206
+    outer loop
+        vertex 64.480286 -101.600006 0
+        vertex 87.15214 -0 -15.875
+        vertex 64.480286 -0 0
+    endloop
+endfacet
+facet normal 0.4226182 0 -0.9063078
+    outer loop
+        vertex 84.906715 -101.600006 9.525
+        vertex 64.480286 -101.600006 0
+        vertex 64.480286 -0 0
+    endloop
+endfacet
+facet normal 0.42261833 0 -0.90630776
+    outer loop
+        vertex 105.33314 -101.600006 19.05
+        vertex 84.906715 -101.600006 9.525
+        vertex 84.906715 -0 9.525
+    endloop
+endfacet
+facet normal 0.4226182 0 -0.9063078
+    outer loop
+        vertex 84.906715 -0 9.525
+        vertex 84.906715 -101.600006 9.525
+        vertex 64.480286 -0 0
+    endloop
+endfacet
+facet normal 0.4226183 0 -0.9063078
+    outer loop
+        vertex 105.33314 -0 19.05
+        vertex 146.18599 -101.600006 38.1
+        vertex 105.33314 -101.600006 19.05
+    endloop
+endfacet
+facet normal 0.42261833 0 -0.90630776
+    outer loop
+        vertex 105.33314 -101.600006 19.05
+        vertex 84.906715 -0 9.525
+        vertex 105.33314 -0 19.05
+    endloop
+endfacet
+facet normal 0.4226183 0 -0.9063078
+    outer loop
+        vertex 146.18599 -101.600006 38.1
+        vertex 105.33314 -0 19.05
+        vertex 146.18599 -0 38.1
+    endloop
+endfacet
+facet normal 0 0 -1
+    outer loop
+        vertex 146.18599 -101.600006 38.1
+        vertex 146.18599 -0 38.1
+        vertex 241.3 -101.600006 38.1
+    endloop
+endfacet
+facet normal 0 0 -1
+    outer loop
+        vertex 241.3 -101.600006 38.1
+        vertex 146.18599 -0 38.1
+        vertex 241.3 -0 38.1
+    endloop
+endfacet
+facet normal 1 0 0
+    outer loop
+        vertex 241.3 -101.600006 38.1
+        vertex 241.3 -0 38.1
+        vertex 241.3 -101.600006 50.800003
+    endloop
+endfacet
+facet normal 1 -0 0
+    outer loop
+        vertex 241.3 -101.600006 50.800003
+        vertex 241.3 -0 38.1
+        vertex 241.3 -0 50.800003
     endloop
 endfacet
 facet normal 0 -0 0.99999994
     outer loop
-        vertex 9.5 -4 -2.5
-        vertex 9.5 -0 -2.5
-        vertex 6.108964 -4 -2.5
+        vertex 241.3 -101.600006 50.800003
+        vertex 241.3 -0 50.800003
+        vertex 143.37048 -101.600006 50.800003
     endloop
 endfacet
 facet normal 0 0 0.99999994
     outer loop
-        vertex 6.108964 -4 -2.5
-        vertex 9.5 -0 -2.5
-        vertex 6.108964 -0 -2.5
+        vertex 143.37048 -101.600006 50.800003
+        vertex 241.3 -0 50.800003
+        vertex 143.37048 -0 50.800003
     endloop
 endfacet
-facet normal 0.5735763 0 0.8191522
+facet normal -0.42261827 0 0.9063078
     outer loop
-        vertex 3.4311862 -4 -0.625
-        vertex 4.323779 -4 -1.25
-        vertex 4.323779 -0 -1.25
+        vertex 143.37048 -101.600006 50.800003
+        vertex 143.37048 -0 50.800003
+        vertex 88.9 -101.600006 25.400002
     endloop
 endfacet
-facet normal 0.57357645 0 0.819152
+facet normal -0.42261827 0 0.9063078
     outer loop
-        vertex 4.323779 -4 -1.25
-        vertex 6.108964 -4 -2.5
-        vertex 6.108964 -0 -2.5
-    endloop
-endfacet
-facet normal 0.57357645 0 0.819152
-    outer loop
-        vertex 3.4311862 -0 -0.625
-        vertex 2.5385938 -4 0
-        vertex 3.4311862 -4 -0.625
-    endloop
-endfacet
-facet normal 0.5735763 0 0.8191522
-    outer loop
-        vertex 4.323779 -0 -1.25
-        vertex 3.4311862 -0 -0.625
-        vertex 3.4311862 -4 -0.625
-    endloop
-endfacet
-facet normal 0.57357645 -0 0.819152
-    outer loop
-        vertex 4.323779 -4 -1.25
-        vertex 6.108964 -0 -2.5
-        vertex 4.323779 -0 -1.25
-    endloop
-endfacet
-facet normal 0.57357645 -0 0.819152
-    outer loop
-        vertex 2.5385938 -4 0
-        vertex 3.4311862 -0 -0.625
-        vertex 2.5385938 -0 0
-    endloop
-endfacet
-facet normal 0.42261824 0 -0.9063078
-    outer loop
-        vertex 3.342784 -4 0.375
-        vertex 2.5385938 -4 0
-        vertex 2.5385938 -0 0
-    endloop
-endfacet
-facet normal 0.42261824 0 -0.9063078
-    outer loop
-        vertex 4.146974 -4 0.75
-        vertex 3.342784 -4 0.375
-        vertex 3.342784 -0 0.375
-    endloop
-endfacet
-facet normal 0.42261824 0 -0.9063078
-    outer loop
-        vertex 3.342784 -0 0.375
-        vertex 3.342784 -4 0.375
-        vertex 2.5385938 -0 0
-    endloop
-endfacet
-facet normal 0.42261833 0 -0.90630776
-    outer loop
-        vertex 4.146974 -0 0.75
-        vertex 5.755354 -4 1.5
-        vertex 4.146974 -4 0.75
-    endloop
-endfacet
-facet normal 0.42261824 0 -0.9063078
-    outer loop
-        vertex 4.146974 -4 0.75
-        vertex 3.342784 -0 0.375
-        vertex 4.146974 -0 0.75
-    endloop
-endfacet
-facet normal 0.42261833 0 -0.90630776
-    outer loop
-        vertex 5.755354 -4 1.5
-        vertex 4.146974 -0 0.75
-        vertex 5.755354 -0 1.5
-    endloop
-endfacet
-facet normal 0 0 -1
-    outer loop
-        vertex 5.755354 -4 1.5
-        vertex 5.755354 -0 1.5
-        vertex 9.5 -4 1.5
-    endloop
-endfacet
-facet normal 0 0 -1
-    outer loop
-        vertex 9.5 -4 1.5
-        vertex 5.755354 -0 1.5
-        vertex 9.5 -0 1.5
-    endloop
-endfacet
-facet normal 1 0 0
-    outer loop
-        vertex 9.5 -4 1.5
-        vertex 9.5 -0 1.5
-        vertex 9.5 -4 2
-    endloop
-endfacet
-facet normal 1 -0 0
-    outer loop
-        vertex 9.5 -4 2
-        vertex 9.5 -0 1.5
-        vertex 9.5 -0 2
+        vertex 88.9 -101.600006 25.400002
+        vertex 143.37048 -0 50.800003
+        vertex 88.9 -0 25.400002
     endloop
 endfacet
 facet normal 0 -0 1
     outer loop
-        vertex 9.5 -4 2
-        vertex 9.5 -0 2
-        vertex 5.644507 -4 2
+        vertex 88.9 -101.600006 25.400002
+        vertex 88.9 -0 25.400002
+        vertex 0 -101.600006 25.400002
     endloop
 endfacet
 facet normal 0 0 1
     outer loop
-        vertex 5.644507 -4 2
-        vertex 9.5 -0 2
-        vertex 5.644507 -0 2
-    endloop
-endfacet
-facet normal -0.42261824 0 0.90630776
-    outer loop
-        vertex 5.644507 -4 2
-        vertex 5.644507 -0 2
-        vertex 3.5 -4 1
-    endloop
-endfacet
-facet normal -0.42261824 0 0.90630776
-    outer loop
-        vertex 3.5 -4 1
-        vertex 5.644507 -0 2
-        vertex 3.5 -0 1
-    endloop
-endfacet
-facet normal 0 -0 1
-    outer loop
-        vertex 3.5 -4 1
-        vertex 3.5 -0 1
-        vertex 0 -4 1
-    endloop
-endfacet
-facet normal 0 0 1
-    outer loop
-        vertex 0 -4 1
-        vertex 3.5 -0 1
-        vertex 0 -0 1
+        vertex 0 -101.600006 25.400002
+        vertex 88.9 -0 25.400002
+        vertex 0 -0 25.400002
     endloop
 endfacet
 facet normal -1 0 0
     outer loop
-        vertex 0 -4 1
-        vertex 0 -0 1
-        vertex 0 -4 0
+        vertex 0 -101.600006 25.400002
+        vertex 0 -0 25.400002
+        vertex 0 -101.600006 0
     endloop
 endfacet
 facet normal -1 0 0
     outer loop
-        vertex 0 -4 0
-        vertex 0 -0 1
+        vertex 0 -101.600006 0
+        vertex 0 -0 25.400002
         vertex 0 -0 0
     endloop
 endfacet
 facet normal 0 1 -0
     outer loop
-        vertex 3.342784 -0 0.375
-        vertex 2.5385938 -0 0
-        vertex 3.5 -0 1
+        vertex 84.906715 -0 9.525
+        vertex 64.480286 -0 0
+        vertex 88.9 -0 25.400002
     endloop
 endfacet
 facet normal 0 1 0
     outer loop
-        vertex 4.146974 -0 0.75
-        vertex 3.342784 -0 0.375
-        vertex 3.5 -0 1
+        vertex 105.33314 -0 19.05
+        vertex 84.906715 -0 9.525
+        vertex 88.9 -0 25.400002
     endloop
 endfacet
 facet normal 0 1 0
     outer loop
-        vertex 3.4311862 -0 -0.625
-        vertex 4.323779 -0 -1.25
-        vertex 3.0950184 -0 -1
+        vertex 87.15214 -0 -15.875
+        vertex 109.82398 -0 -31.75
+        vertex 78.613464 -0 -25.400002
     endloop
 endfacet
-facet normal 0 0.99999994 0
+facet normal 0 1 0
     outer loop
-        vertex 4.146974 -0 0.75
-        vertex 5.644507 -0 2
-        vertex 5.755354 -0 1.5
+        vertex 105.33314 -0 19.05
+        vertex 143.37048 -0 50.800003
+        vertex 146.18599 -0 38.1
     endloop
 endfacet
 facet normal -0 1 0
     outer loop
-        vertex 0 -0 1
-        vertex 3.5 -0 1
-        vertex 2.5385938 -0 0
+        vertex 0 -0 25.400002
+        vertex 88.9 -0 25.400002
+        vertex 64.480286 -0 0
     endloop
 endfacet
 facet normal 0 1 0
     outer loop
-        vertex 0 -0 1
-        vertex 2.5385938 -0 0
+        vertex 0 -0 25.400002
+        vertex 64.480286 -0 0
         vertex 0 -0 0
     endloop
 endfacet
 facet normal -0 1 0
     outer loop
-        vertex 5.644507 -0 2
-        vertex 9.5 -0 2
-        vertex 5.755354 -0 1.5
+        vertex 143.37048 -0 50.800003
+        vertex 241.3 -0 50.800003
+        vertex 146.18599 -0 38.1
     endloop
 endfacet
 facet normal 0 1 0
     outer loop
-        vertex 9.5 -0 2
-        vertex 9.5 -0 1.5
-        vertex 5.755354 -0 1.5
+        vertex 241.3 -0 50.800003
+        vertex 241.3 -0 38.1
+        vertex 146.18599 -0 38.1
     endloop
 endfacet
 facet normal 0 1 -0
     outer loop
-        vertex 4.146974 -0 0.75
-        vertex 3.5 -0 1
-        vertex 5.644507 -0 2
+        vertex 105.33314 -0 19.05
+        vertex 88.9 -0 25.400002
+        vertex 143.37048 -0 50.800003
     endloop
 endfacet
 facet normal 0 0.99999994 0
     outer loop
-        vertex 2.5385938 -0 0
-        vertex 3.4311862 -0 -0.625
-        vertex 3.0950184 -0 -1
-    endloop
-endfacet
-facet normal 0 0.99999994 0
-    outer loop
-        vertex 4.323779 -0 -1.25
-        vertex 5.9513144 -0 -3
-        vertex 3.0950184 -0 -1
+        vertex 64.480286 -0 0
+        vertex 87.15214 -0 -15.875
+        vertex 78.613464 -0 -25.400002
     endloop
 endfacet
 facet normal 0 1 0
     outer loop
-        vertex 6.108964 -0 -2.5
-        vertex 5.9513144 -0 -3
-        vertex 4.323779 -0 -1.25
-    endloop
-endfacet
-facet normal 0 0.99999994 0
-    outer loop
-        vertex 9.5 -0 -2.5
-        vertex 9.5 -0 -3
-        vertex 6.108964 -0 -2.5
+        vertex 109.82398 -0 -31.75
+        vertex 151.16339 -0 -76.2
+        vertex 78.613464 -0 -25.400002
     endloop
 endfacet
 facet normal 0 1 0
     outer loop
-        vertex 6.108964 -0 -2.5
-        vertex 9.5 -0 -3
-        vertex 5.9513144 -0 -3
+        vertex 155.16768 -0 -63.5
+        vertex 151.16339 -0 -76.2
+        vertex 109.82398 -0 -31.75
     endloop
 endfacet
 facet normal 0 1 0
     outer loop
-        vertex 2.5385938 -0 0
-        vertex 3.0950184 -0 -1
-        vertex 0 -0 -1
+        vertex 241.3 -0 -63.5
+        vertex 241.3 -0 -76.2
+        vertex 155.16768 -0 -63.5
     endloop
 endfacet
 facet normal 0 1 0
     outer loop
-        vertex 0 -0 -1
+        vertex 155.16768 -0 -63.5
+        vertex 241.3 -0 -76.2
+        vertex 151.16339 -0 -76.2
+    endloop
+endfacet
+facet normal 0 1 0
+    outer loop
+        vertex 64.480286 -0 0
+        vertex 78.613464 -0 -25.400002
+        vertex 0 -0 -25.400002
+    endloop
+endfacet
+facet normal 0 1 0
+    outer loop
+        vertex 0 -0 -25.400002
         vertex 0 -0 0
-        vertex 2.5385938 -0 0
+        vertex 64.480286 -0 0
     endloop
 endfacet
 facet normal -0 -1 0
     outer loop
-        vertex 3.342784 -4 0.375
-        vertex 3.5 -4 1
-        vertex 2.5385938 -4 0
+        vertex 84.906715 -101.600006 9.525
+        vertex 88.9 -101.600006 25.400002
+        vertex 64.480286 -101.600006 0
     endloop
 endfacet
 facet normal -0 -1 0
     outer loop
-        vertex 4.146974 -4 0.75
-        vertex 3.5 -4 1
-        vertex 3.342784 -4 0.375
+        vertex 105.33314 -101.600006 19.05
+        vertex 88.9 -101.600006 25.400002
+        vertex 84.906715 -101.600006 9.525
     endloop
 endfacet
 facet normal 0 -1 -0
     outer loop
-        vertex 3.4311862 -4 -0.625
-        vertex 3.0950184 -4 -1
-        vertex 4.323779 -4 -1.25
+        vertex 87.15214 -101.600006 -15.875
+        vertex 78.613464 -101.600006 -25.400002
+        vertex 109.82398 -101.600006 -31.75
+    endloop
+endfacet
+facet normal 0 -1 0
+    outer loop
+        vertex 105.33314 -101.600006 19.05
+        vertex 146.18599 -101.600006 38.1
+        vertex 143.37048 -101.600006 50.800003
+    endloop
+endfacet
+facet normal 0 -1 0
+    outer loop
+        vertex 0 -101.600006 25.400002
+        vertex 64.480286 -101.600006 0
+        vertex 88.9 -101.600006 25.400002
+    endloop
+endfacet
+facet normal 0 -1 0
+    outer loop
+        vertex 0 -101.600006 25.400002
+        vertex 0 -101.600006 0
+        vertex 64.480286 -101.600006 0
+    endloop
+endfacet
+facet normal 0 -1 0
+    outer loop
+        vertex 143.37048 -101.600006 50.800003
+        vertex 146.18599 -101.600006 38.1
+        vertex 241.3 -101.600006 50.800003
+    endloop
+endfacet
+facet normal 0 -1 -0
+    outer loop
+        vertex 241.3 -101.600006 50.800003
+        vertex 146.18599 -101.600006 38.1
+        vertex 241.3 -101.600006 38.1
+    endloop
+endfacet
+facet normal 0 -1 0
+    outer loop
+        vertex 105.33314 -101.600006 19.05
+        vertex 143.37048 -101.600006 50.800003
+        vertex 88.9 -101.600006 25.400002
     endloop
 endfacet
 facet normal 0 -0.99999994 0
     outer loop
-        vertex 4.146974 -4 0.75
-        vertex 5.755354 -4 1.5
-        vertex 5.644507 -4 2
+        vertex 64.480286 -101.600006 0
+        vertex 78.613464 -101.600006 -25.400002
+        vertex 87.15214 -101.600006 -15.875
     endloop
 endfacet
-facet normal 0 -1 0
+facet normal -0 -1 -0
     outer loop
-        vertex 0 -4 1
-        vertex 2.5385938 -4 0
-        vertex 3.5 -4 1
-    endloop
-endfacet
-facet normal 0 -1 0
-    outer loop
-        vertex 0 -4 1
-        vertex 0 -4 0
-        vertex 2.5385938 -4 0
-    endloop
-endfacet
-facet normal 0 -1 0
-    outer loop
-        vertex 5.644507 -4 2
-        vertex 5.755354 -4 1.5
-        vertex 9.5 -4 2
-    endloop
-endfacet
-facet normal 0 -1 -0
-    outer loop
-        vertex 9.5 -4 2
-        vertex 5.755354 -4 1.5
-        vertex 9.5 -4 1.5
-    endloop
-endfacet
-facet normal 0 -1 0
-    outer loop
-        vertex 4.146974 -4 0.75
-        vertex 5.644507 -4 2
-        vertex 3.5 -4 1
-    endloop
-endfacet
-facet normal 0 -0.99999994 0
-    outer loop
-        vertex 2.5385938 -4 0
-        vertex 3.0950184 -4 -1
-        vertex 3.4311862 -4 -0.625
-    endloop
-endfacet
-facet normal -0 -0.99999994 -0
-    outer loop
-        vertex 4.323779 -4 -1.25
-        vertex 3.0950184 -4 -1
-        vertex 5.9513144 -4 -3
+        vertex 109.82398 -101.600006 -31.75
+        vertex 78.613464 -101.600006 -25.400002
+        vertex 151.16339 -101.600006 -76.2
     endloop
 endfacet
 facet normal -0 -1 0
     outer loop
-        vertex 6.108964 -4 -2.5
-        vertex 4.323779 -4 -1.25
-        vertex 5.9513144 -4 -3
+        vertex 155.16768 -101.600006 -63.5
+        vertex 109.82398 -101.600006 -31.75
+        vertex 151.16339 -101.600006 -76.2
     endloop
 endfacet
-facet normal -0 -0.99999994 -0
+facet normal -0 -1 -0
     outer loop
-        vertex 9.5 -4 -2.5
-        vertex 6.108964 -4 -2.5
-        vertex 9.5 -4 -3
+        vertex 241.3 -101.600006 -63.5
+        vertex 155.16768 -101.600006 -63.5
+        vertex 241.3 -101.600006 -76.2
     endloop
 endfacet
 facet normal 0 -1 -0
     outer loop
-        vertex 6.108964 -4 -2.5
-        vertex 5.9513144 -4 -3
-        vertex 9.5 -4 -3
+        vertex 155.16768 -101.600006 -63.5
+        vertex 151.16339 -101.600006 -76.2
+        vertex 241.3 -101.600006 -76.2
     endloop
 endfacet
 facet normal 0 -1 -0
     outer loop
-        vertex 2.5385938 -4 0
-        vertex 0 -4 -1
-        vertex 3.0950184 -4 -1
+        vertex 64.480286 -101.600006 0
+        vertex 0 -101.600006 -25.400002
+        vertex 78.613464 -101.600006 -25.400002
     endloop
 endfacet
 facet normal 0 -1 0
     outer loop
-        vertex 0 -4 -1
-        vertex 2.5385938 -4 0
-        vertex 0 -4 0
+        vertex 0 -101.600006 -25.400002
+        vertex 64.480286 -101.600006 0
+        vertex 0 -101.600006 0
     endloop
 endfacet
 endsolid unnamed

e2e/playwright/flow-tests.spec.ts

@@ -72,7 +72,7 @@ test('Basic sketch', async ({ page }) => {
 
   const startXPx = 600
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-  const startAt = '[23.89, -32.23]'
+  const startAt = '[23.74, -32.03]'
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)`)
@@ -82,7 +82,7 @@ test('Basic sketch', async ({ page }) => {
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(100)
 
-  const num = 24.11
+  const num = 23.97
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)
@@ -93,14 +93,14 @@ test('Basic sketch', async ({ page }) => {
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)
   |> line([${num}, 0], %)
-  |> line([0, ${num + 0.01}], %)`)
+  |> line([0, ${num}], %)`)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)
   |> line([${num}, 0], %)
-  |> line([0, ${num + 0.01}], %)
-  |> line([-48, 0], %)`)
+  |> line([0, ${num}], %)
+  |> line([-47.71, 0], %)`)
 
   // deselect line tool
   await page.getByRole('button', { name: 'Line' }).click()
@@ -124,7 +124,7 @@ test('Basic sketch', async ({ page }) => {
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)
   |> line({ to: [${num}, 0], tag: 'seg01' }, %)
-  |> line([0, ${num + 0.01}], %)
+  |> line([0, ${num}], %)
   |> angledLine([180, segLen('seg01', %)], %)`)
 })
 
@@ -375,6 +375,7 @@ test('Auto complete works', async ({ page }) => {
   await page.keyboard.type('  |> lin')
 
   await expect(page.locator('.cm-tooltip-autocomplete')).toBeVisible()
+  await page.waitForTimeout(100)
   // press arrow down twice then enter to accept xLine
   await page.keyboard.press('ArrowDown')
   await page.keyboard.press('ArrowDown')
@@ -460,7 +461,7 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
 
   const startXPx = 600
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-  const startAt = '[23.89, -32.23]'
+  const startAt = '[23.74, -32.03]'
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)`)
@@ -469,8 +470,8 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
 
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
 
-  const num = 24.11
-  const num2 = '48'
+  const num = 23.97
+  const num2 = '47.71'
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)
@@ -481,13 +482,13 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)
   |> line([${num}, 0], %)
-  |> line([0, ${num + 0.01}], %)`)
+  |> line([0, ${num}], %)`)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)
   |> line([${num}, 0], %)
-  |> line([0, ${num + 0.01}], %)
+  |> line([0, ${num}], %)
   |> line([-${num2}, 0], %)`)
 
   // deselect line tool
@@ -573,12 +574,13 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   await u.closeDebugPanel()
 
   // select a line
-  await topHorzSegmentClick()
-  await page.waitForTimeout(200)
+  // await topHorzSegmentClick()
+  await page.getByText(startAt).click() // TODO remove this and reinstate // await topHorzSegmentClick()
+  await page.waitForTimeout(100)
 
   // enter sketch again
   await page.getByRole('button', { name: 'Edit Sketch' }).click()
-  await page.waitForTimeout(700) // wait for animation
+  await page.waitForTimeout(300) // wait for animation
 
   // hover again and check it works
   await selectionSequence()
@@ -714,7 +716,7 @@ test('Can add multiple sketches', async ({ page }) => {
 
   const startXPx = 600
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-  const startAt = '[23.89, -32.23]'
+  const startAt = '[23.74, -32.03]'
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)`)
@@ -724,7 +726,7 @@ test('Can add multiple sketches', async ({ page }) => {
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(100)
 
-  const num = 24.11
+  const num = 23.97
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)
@@ -735,13 +737,13 @@ test('Can add multiple sketches', async ({ page }) => {
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)
   |> line([${num}, 0], %)
-  |> line([0, ${num + 0.01}], %)`)
+  |> line([0, ${num}], %)`)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   const finalCodeFirstSketch = `const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)
   |> line([${num}, 0], %)
-  |> line([0, ${num + 0.01}], %)
-  |> line([-48, 0], %)`
+  |> line([0, ${num}], %)
+  |> line([-47.71, 0], %)`
   await expect(page.locator('.cm-content')).toHaveText(finalCodeFirstSketch)
 
   // exit the sketch
@@ -849,7 +851,10 @@ test('ProgramMemory can be serialised', async ({ page, context }) => {
   })
 })
 
-test('edit selections', async ({ page, context }) => {
+test("Various pipe expressions should and shouldn't allow edit and or extrude", async ({
+  page,
+  context,
+}) => {
   const u = getUtils(page)
   const selectionsSnippets = {
     extrudeAndEditBlocked: '|> startProfileAt([10.81, 32.99], %)',
@@ -948,3 +953,64 @@ fn yohey = (pos) => {
     /part005 = startSketchOn\('-XZ'\)/
   )
 })
+
+test('Deselecting line tool should mean nothing happens on click', async ({
+  page,
+}) => {
+  const u = getUtils(page)
+  await page.setViewportSize({ width: 1200, height: 500 })
+  const PUR = 400 / 37.5 //pixeltoUnitRatio
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await u.openDebugPanel()
+
+  await expect(page.getByRole('button', { name: 'Start Sketch' })).toBeVisible()
+
+  // click on "Start Sketch" button
+  await u.clearCommandLogs()
+  await u.doAndWaitForImageDiff(
+    () => page.getByRole('button', { name: 'Start Sketch' }).click(),
+    200
+  )
+
+  await page.mouse.click(700, 200)
+
+  await expect(page.locator('.cm-content')).toHaveText(
+    `const part001 = startSketchOn('-XZ')`
+  )
+
+  await page.waitForTimeout(300)
+
+  let previousCodeContent = await page.locator('.cm-content').innerText()
+
+  // deselect the line tool by clicking it
+  await page.getByRole('button', { name: 'Line' }).click()
+
+  await page.mouse.click(700, 200)
+  await page.waitForTimeout(100)
+  await page.mouse.click(700, 250)
+  await page.waitForTimeout(100)
+  await page.mouse.click(750, 200)
+  await page.waitForTimeout(100)
+
+  // expect no change
+  await expect(page.locator('.cm-content')).toHaveText(previousCodeContent)
+
+  // select line tool again
+  await page.getByRole('button', { name: 'Line' }).click()
+
+  await u.closeDebugPanel()
+
+  // line tool should work as expected again
+  await page.mouse.click(700, 200)
+  await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
+  previousCodeContent = await page.locator('.cm-content').innerText()
+
+  await page.mouse.click(700, 300)
+  await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
+  previousCodeContent = await page.locator('.cm-content').innerText()
+
+  await page.mouse.click(750, 300)
+  await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
+  previousCodeContent = await page.locator('.cm-content').innerText()
+})

e2e/playwright/snapshot-tests.spec.ts

@@ -369,13 +369,13 @@ test('extrude on each default plane should be stable', async ({
 }) => {
   const u = getUtils(page)
   const makeCode = (plane = 'XY') => `const part001 = startSketchOn('${plane}')
-  |> startProfileAt([14.06, 8.88], %)
-  |> line([12.98, -0.15], %)
-  |> line([5.56, 9.89], %)
-  |> line([-11.28, 8.96], %)
-  |> line([-10.81, -7.57], %)
+  |> startProfileAt([0.70, 0.44], %)
+  |> line([0.66, -0.02], %)
+  |> line([0.28, 0.50], %)
+  |> line([-0.56, 0.44], %)
+  |> line([-0.54, -0.38], %)
   |> close(%)
-  |> extrude(20, %)
+  |> extrude(1.00, %)
 `
   await context.addInitScript(async (code) => {
     localStorage.setItem('persistCode', code)
@@ -448,7 +448,7 @@ test('Draft segments should look right', async ({ page }) => {
 
   const startXPx = 600
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-  const startAt = '[23.89, -32.23]'
+  const startAt = '[23.74, -32.03]'
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)`)
@@ -463,7 +463,7 @@ test('Draft segments should look right', async ({ page }) => {
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(100)
 
-  const num = 24.11
+  const num = 23.97
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${startAt}, %)

make-release.sh

@@ -0,0 +1,69 @@
+#!/bin/bash
+
+if ! git diff-index --quiet HEAD --; then
+  echo "Please stash uncommitted changes before running release script"
+  exit 1
+fi
+
+git checkout main
+git pull
+git fetch --all
+
+# Get the latest semver tag from git
+latest_tag=$(jq -r '.version' package.json)
+latest_tag="v$latest_tag"
+
+# Print the latest semver tag
+echo "Latest semver tag: $latest_tag"
+
+# Function to bump version numbers
+bump_version() {
+  local version=$1
+  local bump_type=$2
+  local major=$(echo $version | cut -d '.' -f 1 | sed 's/v//')
+  local minor=$(echo $version | cut -d '.' -f 2)
+  local patch=$(echo $version | cut -d '.' -f 3)
+
+  case "$bump_type" in
+    major)
+      major=$((major + 1))
+      minor=0
+      patch=0
+      ;;
+    minor)
+      minor=$((minor + 1))
+      patch=0
+      ;;
+    *)
+      patch=$((patch + 1))
+      ;;
+  esac
+
+  echo "v${major}.${minor}.${patch}"
+}
+
+# Determine the type of bump based on the argument
+bump_type=${1:-patch}
+
+# Bump the version
+new_version=$(bump_version $latest_tag $bump_type)
+
+# Print the new semver tag
+echo "New semver tag: $new_version"
+new_version_number=${new_version:1}
+echo "New version number without 'v': $new_version_number"
+
+
+git checkout -b "cut-release-$new_version"
+
+echo "$(jq --arg v "$new_version_number" '.version=$v' package.json --indent 2)" > package.json
+echo "$(jq --arg v "$new_version_number" '.package.version=$v' src-tauri/tauri.conf.json --indent 2)" > src-tauri/tauri.conf.json
+
+git add package.json src-tauri/tauri.conf.json
+git commit -m "Cut release $new_version"
+
+echo ""
+echo "Versions has been bumped in relevant json files, a branch has been created and committed to."
+echo ""
+echo "What's left for you to do is, push the branch and make the release PR."
+echo ""

package.json

@@ -1,6 +1,6 @@
 {
   "name": "untitled-app",
-  "version": "0.15.1",
+  "version": "0.15.2",
   "private": true,
   "dependencies": {
     "@codemirror/autocomplete": "^6.10.2",
@@ -34,6 +34,7 @@
     "fuse.js": "^7.0.0",
     "http-server": "^14.1.1",
     "json-rpc-2.0": "^1.6.0",
+    "node-fetch": "^3.3.2",
     "re-resizable": "^6.9.11",
     "react": "^18.2.0",
     "react-dom": "^18.2.0",
@@ -51,7 +52,7 @@
     "ts-node": "^10.9.1",
     "typescript": "^5.2.2",
     "uuid": "^9.0.1",
-    "vitest": "^0.34.6",
+    "vitest": "^1.3.1",
     "vscode-jsonrpc": "^8.1.0",
     "vscode-languageserver-protocol": "^3.17.5",
     "wasm-pack": "^0.12.1",
@@ -72,7 +73,6 @@
     "test": "vitest --mode development",
     "test:nowatch": "vitest run --mode development",
     "test:rust": "(cd src/wasm-lib && cargo test --all && cargo clippy --all --tests --benches)",
-    "test:cov": "vitest run --coverage --mode development",
     "test:e2e:tauri": "E2E_TAURI_ENABLED=true TS_NODE_COMPILER_OPTIONS='{\"module\": \"commonjs\"}' wdio run wdio.conf.ts",
     "simpleserver:ci": "yarn pretest && http-server ./public --cors -p 3000 &",
     "simpleserver": "yarn pretest && http-server ./public --cors -p 3000",
@@ -113,7 +113,6 @@
     "@tauri-apps/cli": "^1.5.6",
     "@types/crypto-js": "^4.1.1",
     "@types/debounce-promise": "^3.1.8",
-    "@types/isomorphic-fetch": "^0.0.36",
     "@types/pixelmatch": "^5.2.6",
     "@types/pngjs": "^6.0.4",
     "@types/react-modal": "^3.16.3",
@@ -122,8 +121,7 @@
     "@types/wait-on": "^5.3.4",
     "@types/wicg-file-system-access": "^2020.9.6",
     "@types/ws": "^8.5.5",
-    "@vitejs/plugin-react": "^4.1.1",
-    "@vitest/coverage-istanbul": "^0.34.6",
+    "@vitejs/plugin-react": "^4.2.1",
     "@wdio/cli": "^8.24.3",
     "@wdio/globals": "^8.24.3",
     "@wdio/local-runner": "^8.24.3",
@@ -144,10 +142,10 @@
     "prettier": "^2.8.0",
     "setimmediate": "^1.0.5",
     "tailwindcss": "^3.3.6",
-    "vite": "^4.5.2",
+    "vite": "^5.1.3",
     "vite-plugin-eslint": "^1.8.1",
     "vite-plugin-package-version": "^1.1.0",
-    "vite-tsconfig-paths": "^4.2.1",
+    "vite-tsconfig-paths": "^4.3.1",
     "vitest-webgl-canvas-mock": "^1.1.0",
     "wait-on": "^7.2.0",
     "yarn": "^1.22.19"

src-tauri/tauri.conf.json

@@ -7,7 +7,7 @@
   },
   "package": {
     "productName": "zoo-modeling-app",
-    "version": "0.15.1"
+    "version": "0.15.2"
   },
   "tauri": {
     "allowlist": {

src/App.tsx

@@ -140,7 +140,7 @@ export function App() {
       <Resizable
         className={
           'pointer-events-none h-full flex flex-col flex-1 z-10 my-5 ml-5 pr-1 transition-opacity transition-duration-75 ' +
-          +paneOpacity
+          paneOpacity
         }
         defaultSize={{
           width: '550px',

src/Toolbar.tsx

@@ -124,7 +124,7 @@ export const Toolbar = () => {
                 aria-pressed={state.matches('Sketch.Tangential arc to')}
                 className="pressed:bg-energy-10/20 dark:pressed:bg-energy-80"
                 icon={{
-                  icon: 'line',
+                  icon: 'arc',
                   bgClassName,
                 }}
                 disabled={

src/clientSideScene/sceneEntities.ts

@@ -238,6 +238,7 @@ class SceneEntities {
     ast?: Program
     draftSegment?: DraftSegment
   }) {
+    sceneInfra.resetMouseListeners()
     this.createIntersectionPlane()
     const distance = sceneInfra.controls.target.distanceTo(
       sceneInfra.camera.position
@@ -798,6 +799,7 @@ class SceneEntities {
         if (args.event.which !== 1) return
         const { object, intersection } = args
         const type = object?.userData?.type || ''
+        console.log('intersection.normal?.z', intersection)
         const posNorm = Number(intersection.normal?.z) > 0
         let planeString: DefaultPlaneStr = posNorm ? 'XY' : '-XY'
         let normal: [number, number, number] = posNorm ? [0, 0, 1] : [0, 0, -1]

src/clientSideScene/sceneInfra.ts

@@ -14,10 +14,8 @@ import {
   Vector2,
   Group,
   PlaneGeometry,
-  EdgesGeometry,
   MeshBasicMaterial,
   Mesh,
-  LineSegments,
   DoubleSide,
   Intersection,
   Object3D,
@@ -34,7 +32,7 @@ import * as TWEEN from '@tweenjs/tween.js'
 import { MouseGuard, cameraMouseDragGuards } from 'lib/cameraControls'
 import { SourceRange } from 'lang/wasm'
 import { Axis } from 'lib/selections'
-import { createGridHelper } from './helpers'
+import { BaseUnit, SETTINGS_PERSIST_KEY } from 'machines/settingsMachine'
 
 type SendType = ReturnType<typeof useModelingContext>['send']
 
@@ -227,6 +225,15 @@ class SceneInfra {
     this.onMouseLeave = callbacks.onMouseLeave || this.onMouseLeave
     this.selected = null // following selections between callbacks being set is too tricky
   }
+  resetMouseListeners = () => {
+    sceneInfra.setCallbacks({
+      onDrag: () => {},
+      onMove: () => {},
+      onClick: () => {},
+      onMouseEnter: () => {},
+      onMouseLeave: () => {},
+    })
+  }
   highlightCallback: (a: SourceRange) => void = () => {}
   setHighlightCallback(cb: (a: SourceRange) => void) {
     this.highlightCallback = cb
@@ -299,8 +306,17 @@ class SceneInfra {
     this.scene.background = null
 
     // CAMERA
+    const camHeightDistanceRatio = 0.5
+    const baseUnit: BaseUnit =
+      JSON.parse(localStorage?.getItem(SETTINGS_PERSIST_KEY) || ('{}' as any))
+        .baseUnit || 'mm'
+    const baseRadius = 5.6
+    const length = baseUnitTomm(baseUnit) * baseRadius
+    const ang = Math.atan(camHeightDistanceRatio)
+    const x = Math.cos(ang) * length
+    const y = Math.sin(ang) * length
     this.camera = this.createPerspectiveCamera()
-    this.camera.position.set(0, -128, 64)
+    this.camera.position.set(0, -x, y)
     if (DEBUG_SHOW_INTERSECTION_PLANE)
       this.camera.layers.enable(INTERSECTION_PLANE_LAYER)
 
@@ -1098,6 +1114,23 @@ export function getSceneScale(
   return 1
 }
 
+function baseUnitTomm(baseUnit: BaseUnit) {
+  switch (baseUnit) {
+    case 'mm':
+      return 1
+    case 'cm':
+      return 10
+    case 'm':
+      return 1000
+    case 'in':
+      return 25.4
+    case 'ft':
+      return 304.8
+    case 'yd':
+      return 914.4
+  }
+}
+
 export function isQuaternionVertical(q: Quaternion) {
   const v = new Vector3(0, 0, 1).applyQuaternion(q)
   // no x or y components means it's vertical

src/components/CollapsiblePanel.module.css

@@ -39,7 +39,22 @@
 }
 
 .panel[open] {
-  @apply flex-grow max-h-full h-48 my-1 rounded;
+  @apply relative flex-grow max-h-full h-48 my-1 rounded;
+}
+
+/*
+  Open panels have a little bit of a buffer around them
+  to make it harder to accidentally click or interact with the stream behind them.
+  The right side buffer is a little smaller so people don't get frustrated by it.
+  TODO: make this logic flexible for if the panel is on the right side of the screen.
+*/
+.panel[open]::before {
+  @apply absolute -inset-5 -top-2 -right-1 z-0;
+  @apply content-[''];
+}
+
+.panel[open]:first-of-type::before {
+  @apply -top-5;
 }
 
 .panel[open] + .panel[open],

src/components/CommandBar/CommandBar.tsx

@@ -27,6 +27,7 @@ export const CommandBarProvider = ({
 }) => {
   const { pathname } = useLocation()
   const [commandBarState, commandBarSend] = useMachine(commandBarMachine, {
+    devTools: true,
     guards: {
       'Arguments are ready': (context, _) => {
         return context.selectedCommand?.args

src/components/CustomIcon.tsx

@@ -1,4 +1,5 @@
 export type CustomIconName =
+  | 'arc'
   | 'arrowDown'
   | 'arrowLeft'
   | 'arrowRight'
@@ -22,6 +23,7 @@ export type CustomIconName =
   | 'networkCrossedOut'
   | 'parallel'
   | 'search'
+  | 'settings'
   | 'sketch'
   | 'vertical'
 
@@ -32,6 +34,22 @@ export const CustomIcon = ({
   name: CustomIconName
 } & React.SVGProps<SVGSVGElement>) => {
   switch (name) {
+    case 'arc':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            fillRule="evenodd"
+            clipRule="evenodd"
+            d="M10 1.5C8.60217 1.5 7.22591 1.84474 5.99313 2.50367C4.76035 3.1626 3.70911 4.1154 2.93251 5.27765C2.15592 6.43991 1.67794 7.77575 1.54093 9.16685C1.40392 10.558 1.6121 11.9614 2.14703 13.2528C2.68195 14.5442 3.52712 15.6838 4.60766 16.5706C5.6882 17.4574 6.97076 18.064 8.34173 18.3367C9.71271 18.6094 11.1298 18.5398 12.4674 18.134C13.8051 17.7282 15.022 16.9988 16.0104 16.0104C16.3068 15.714 16.5796 15.3974 16.8273 15.0634L16.0241 14.4677C15.8055 14.7624 15.5648 15.0418 15.3033 15.3033C14.4312 16.1754 13.3574 16.819 12.1771 17.1771C10.9969 17.5351 9.74651 17.5965 8.53682 17.3559C7.32714 17.1153 6.19547 16.58 5.24205 15.7976C4.28863 15.0151 3.5429 14.0096 3.07091 12.8701C2.59891 11.7306 2.41522 10.4923 2.53612 9.26487C2.65701 8.03743 3.07875 6.85874 3.76398 5.83322C4.44921 4.8077 5.37678 3.967 6.46453 3.38559C7.55227 2.80418 8.76662 2.5 10 2.5C10.3699 2.5 10.7376 2.52734 11.1005 2.58117L11.2472 1.59199C10.836 1.53099 10.4192 1.5 10 1.5ZM13.2067 3.22008C13.5383 3.37691 13.8593 3.5585 14.1668 3.76398C14.4743 3.96946 14.7649 4.19652 15.0367 4.44286L15.7083 3.70191C15.4002 3.42271 15.0709 3.16538 14.7223 2.93251C14.3738 2.69964 14.0101 2.49384 13.6342 2.31609L13.2067 3.22008ZM16.433 6.14423C16.6216 6.45886 16.7876 6.78818 16.9291 7.12987C17.0706 7.47157 17.1861 7.82181 17.2752 8.17765L18.2453 7.93467C18.1443 7.53138 18.0134 7.13444 17.853 6.74719C17.6926 6.35995 17.5044 5.98672 17.2907 5.63012L16.433 6.14423ZM17.491 10.368C17.473 10.7344 17.428 11.1004 17.3559 11.4632C17.2837 11.8259 17.1852 12.1813 17.0616 12.5267L18.0031 12.8636C18.1432 12.4721 18.2549 12.0694 18.3367 11.6583C18.4184 11.2472 18.4694 10.8323 18.4898 10.4171L17.491 10.368Z"
+            fill="currentColor"
+          />
+        </svg>
+      )
     case 'arrowDown':
       return (
         <svg
@@ -398,6 +416,22 @@ export const CustomIcon = ({
           />
         </svg>
       )
+    case 'settings':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            fillRule="evenodd"
+            clipRule="evenodd"
+            d="M8 5.5C8 5.77614 7.77614 6 7.5 6C7.22386 6 7 5.77614 7 5.5C7 5.22386 7.22386 5 7.5 5C7.77614 5 8 5.22386 8 5.5ZM6.08535 6C6.29127 6.5826 6.84689 7 7.5 7C8.32843 7 9 6.32843 9 5.5C9 4.67157 8.32843 4 7.5 4C6.84689 4 6.29127 4.4174 6.08535 5H5V6H6.08535ZM15 6H9.94999C9.98278 5.83844 10 5.67123 10 5.5C10 5.32877 9.98278 5.16155 9.94999 5H15V6ZM11 14.5C11 14.7761 10.7761 15 10.5 15C10.2239 15 10 14.7761 10 14.5C10 14.2239 10.2239 14 10.5 14C10.7761 14 11 14.2239 11 14.5ZM9.08535 15C9.29127 15.5826 9.84689 16 10.5 16C11.3284 16 12 15.3284 12 14.5C12 13.6716 11.3284 13 10.5 13C9.84689 13 9.29127 13.4174 9.08535 14H5V15H9.08535ZM15 15H12.95C12.9828 14.8384 13 14.6712 13 14.5C13 14.3288 12.9828 14.1616 12.95 14H15V15ZM11.5 10.5C11.7761 10.5 12 10.2761 12 10C12 9.72386 11.7761 9.5 11.5 9.5C11.2239 9.5 11 9.72386 11 10C11 10.2761 11.2239 10.5 11.5 10.5ZM11.5 8.5C12.1531 8.5 12.7087 8.9174 12.9146 9.5H15V10.5H12.9146C12.7087 11.0826 12.1531 11.5 11.5 11.5C10.6716 11.5 10 10.8284 10 10C10 9.17157 10.6716 8.5 11.5 8.5ZM9.05001 10.5C9.01722 10.3384 9 10.1712 9 10C9 9.82877 9.01722 9.66155 9.05001 9.5H5V10.5H9.05001Z"
+            fill="currentColor"
+          />
+        </svg>
+      )
     case 'sketch':
       return (
         <svg

src/components/GlobalStateProvider.tsx

@@ -30,6 +30,12 @@ type GlobalContext = {
   settings: MachineContext<typeof settingsMachine>
 }
 
+// a little hacky for sure, open to changing it
+// this implies that we should only even have one instance of this provider mounted at any one time
+// but I think that's a safe assumption
+let settingsStateRef: (typeof settingsMachine)['context'] | undefined
+export const getSettingsState = () => settingsStateRef
+
 export const GlobalStateContext = createContext({} as GlobalContext)
 
 export const GlobalStateProvider = ({
@@ -71,6 +77,7 @@ export const GlobalStateProvider = ({
       },
     },
   })
+  settingsStateRef = settingsState.context
 
   useStateMachineCommands({
     machineId: 'settings',

src/components/UserSidebarMenu.tsx

@@ -117,7 +117,7 @@ const UserSidebarMenu = ({ user }: { user?: User }) => {
               <div className="p-4 flex flex-col gap-2">
                 <ActionButton
                   Element="button"
-                  icon={{ icon: 'gear' }}
+                  icon={{ icon: 'settings' }}
                   className="border-transparent dark:border-transparent hover:bg-transparent"
                   onClick={() => {
                     // since /settings is a nested route the sidebar doesn't close

src/lang/KclSingleton.tsx

@@ -211,7 +211,7 @@ class KclManager {
       console.error('error parsing code', e)
       if (e instanceof KCLError) {
         this.kclErrors = [e]
-        if (e.msg === 'file is empty') engineCommandManager.endSession()
+        if (e.msg === 'file is empty') engineCommandManager?.endSession()
       }
       return null
     }

src/lang/wasm.ts

@@ -136,15 +136,21 @@ export const executor = async (
   return _programMemory
 }
 
+const getSettingsState = import('components/GlobalStateProvider').then(
+  (module) => module.getSettingsState
+)
+
 export const _executor = async (
   node: Program,
   programMemory: ProgramMemory = { root: {}, return: null },
   engineCommandManager: EngineCommandManager
 ): Promise<ProgramMemory> => {
   try {
+    const baseUnit = (await getSettingsState)()?.baseUnit || 'mm'
     const memory: ProgramMemory = await execute_wasm(
       JSON.stringify(node),
       JSON.stringify(programMemory),
+      baseUnit,
       engineCommandManager,
       fileSystemManager
     )

src/lib/commandBarConfigs/settingsCommandConfig.ts

@@ -36,7 +36,7 @@ export const settingsCommandBarConfig: CommandSetConfig<
   SettingsCommandSchema
 > = {
   'Set Base Unit': {
-    icon: 'gear',
+    icon: 'settings',
     args: {
       baseUnit: {
         inputType: 'options',
@@ -52,7 +52,7 @@ export const settingsCommandBarConfig: CommandSetConfig<
     },
   },
   'Set Camera Controls': {
-    icon: 'gear',
+    icon: 'settings',
     args: {
       cameraControls: {
         inputType: 'options',
@@ -68,7 +68,7 @@ export const settingsCommandBarConfig: CommandSetConfig<
     },
   },
   'Set Default Project Name': {
-    icon: 'gear',
+    icon: 'settings',
     hide: 'web',
     args: {
       defaultProjectName: {
@@ -79,7 +79,7 @@ export const settingsCommandBarConfig: CommandSetConfig<
     },
   },
   'Set Text Wrapping': {
-    icon: 'gear',
+    icon: 'settings',
     args: {
       textWrapping: {
         inputType: 'options',
@@ -101,7 +101,7 @@ export const settingsCommandBarConfig: CommandSetConfig<
     },
   },
   'Set Theme': {
-    icon: 'gear',
+    icon: 'settings',
     args: {
       theme: {
         inputType: 'options',
@@ -117,7 +117,7 @@ export const settingsCommandBarConfig: CommandSetConfig<
     },
   },
   'Set Unit System': {
-    icon: 'gear',
+    icon: 'settings',
     args: {
       unitSystem: {
         inputType: 'options',

src/machines/modelingMachine.ts

@@ -119,7 +119,7 @@ export type MoveDesc = { line: number; snippet: string }
 
 export const modelingMachine = createMachine(
   {
-    /** @xstate-layout N4IgpgJg5mDOIC5QFkD2EwBsCWA7KAxAMICGuAxlgNoAMAuoqAA6qzYAu2qujIAHogC0AdgCsAZgB04gEyjhADnEA2GgoUAWJQBoQAT0QBGGuICckmoZkbTM42YWKAvk91oMOfAQDKYdgAJYLDByTm5aBiQQFjYwniiBBFtpGhlxDRphGg1ZURlhXQMEcRLDSVF5UwV84XEK8Rc3dCw8KElsCEwwHz9A4NCuXAjeGI5B3kTBDOFJYWVlQ2UlY3UrQsQFUQVy0Q00w3FLGVNTBtcQdxb8ds7ugFFcdjAAJ0CAaz9yAAthqNG4iZCdKiWZpcQKEyHTKmTLrYrCGb5DRaGHKBGiYzKRoXZqeNodLoEB5PV6wD7sb5UQyRZisMbcQEIQRLGiSdRmfIqUxLCpw5QqcrQ4SGTTWUx5bGXPE3Ql3PjsZ4AVwwv1psXGCSEMjkkhkNFE-MNBxo4vEcM22wqOQxikMKwUktxrUk3nJ32IZEomFdnx+9BGdIBmoQdoUykkxmEyIhELMsjhobKoYUdsOIq2jo8zp9FK+LrdXwAkrcegEgl0BuF-X9AxrQIlDHspPzRKYbAsttYzfojCYZBYaEs5uCaCZuZmrm0c99877i4TkCQPn0oABbMCPfwANxenHIJEwquitYZwaspiT1U0c00qQKPZDGgOKVHcgk+SUGgn0uned-8+6RdlyCNcNwCL5UGebAAC9uHYA8j3+Ot+CMJFJFUMN9TtfI0RkBNxDtcoNHkSx+WMCoZG-bMC1nXMAOIbhYAVEg8H8CCoNgx4D38CBsCYz0wEQk94nrVDdgsJsTU-C91DhNJuQsCpRFHYiLwOKjrl-WjvnoohGOY1id2ePduN4-iKEE6s1XpESUJDGQlkkcUZE2RYnzUPY5M5cprBFDQEWEBzdg0qcaP-Es9NwJjnhY3B-AAQQAIW8fwAA0hPVU9RPszZJByMRG1Oc80jk8UNCcg1FFfVtajOJos00sKC10-SYtYpKUoATQymzGSsXLrDsZQ5EMA0DTwh9DnUUElMWNQoy-c4pWo31tKLCLWti-wyCgLoeqDbKDhyaQlCveQU2EUw5OUxEtnkdE0ROYQQrWtaWqigy4q6fB2D9Glj0y2yGxKGYVANE0Dn2UQ5IWbY5jbQxLujFRnqWp1GtW8LCUi6KtqYF58dwXjyEVTASFeMz4Is-bkIbbVthsIrrEsTDlDklNyuFKpTARaxkTEF6tKx7occ+tjIJguCD0wPRtpwKAhisgHerPBz+wtLQJGIjJ+QTDFw2OLZ-MCsR+TqnEGtCzHmo2j62rioyTMwGW5ewBWaayuyrEuvLZEccVFjMDEE2GkEth5qolmORxzeWjHcze23cdY2BcBIJh-HYVA0o9oGjAIqQHJHBQeeqMw5OyfttQNeZVC2QLKLRy3XuFhi7a21P08z7PuqVpDPeB59MjIhFxGFbI5MbGZdkcOQLyjZQckFpq5yTsWwAAR0VbjvqgX7c7644pAxY2ef1OQx4TWpWRyExR31ZQDVMZfrdX7HNtYphyel6g++EvrZAzFSEXUapwnxRgTKcIBpQFgnEyGoUQL8E6t1FvbfwzwwCrlQDufw5AP6PFgAfVWWh0JWGIsNTQo0dAPhFARCwixbDZBKGoYaSCZytwAEpgEEGAPgIRFRPCIYdOoUgDiGFOKkdIYhg4PnUP2dIqQ0S1yUAsNhf4bayi3tgDOAAZPAYBu6oEPH-QGfVUSCnqLYMQ1CiiBXDMiAi2o1CKPHE3ScLcNH3C0RnKmMBHjYG4uTcg3chF2SGtscEBoCKP0UCIhMxgyg3jrrE5Ei81GSHigAdxYuBCWnF4KYB4nxKmlB-B4AAGaoAIBAbgYB2i4C3KgD4kgYDsEEOxSWXFMCCAqagUJiQ0jZDyhoReJpahPVqHJJ85hNguX2MoWwlV0lZJyeLDiUtCmUwEmU3AlSCAvGeJBSQTAybsEqc8VcLS-DtLyRsnpuy+kmJVtlQZII7TIlTMRFyPM5Lgn7NkQco46g4UMMs7JHBty7mwPuTZxTtm9OqbU+pjTmmtMEI7aFB57mVP6YgfY-YDi2hMGicR+QvJKDZGIOQdhSiBTBasjFMKinmVKQig5RyTkkDOZBS5aLGVYt6bihA+K2T6jEPPI2Xk9gRkfqoNIcj2T0ohR1NKOy9k1NwHUvAKK6lopIAAI1gIIPg2LHn-X7nnYV0TZjDVfBfLYpVhoRgyE+Reshhq1CVQEFVqU1VVPZc8Y5pzzm8uuQao1JrBVPIOmEgiMwcjgiUK2fUWhSqLGkFsR+BFshRmfm4n8NEVnKuSv4TqfrEWauRU03VYbDWCD0KaoV8yM3yAqLYKBxE4SHDRHlbmyktiHGCvmlaCci3epLWWtlzxDmBs5dyi5Vy2nhvrY26NtM8VxosDhMeDl+Suq7W5CwCz5jV0JY3eq7itJju2vgLo5aNVaoadWxdggdpdFXea-+wZ9ig0sAcPIrYA7XQNE5Qdf6KhhgRF6m9u0DFTpnUGrlIaX1vu4VGz9pjv0EThtkfqVg1Dz2uojCM-6shyHPmiaDu9fr3qRdq59aLqNfA-QGTDLyCIghyPJcBew7ww1yoOWlKhEZWCoxuPeXxy0BsQ-O0NbSmMsZrGx2N6bjAmC2Isa8E0igOWlSelE-l7oGmg-jZ4hNiak3JsykpcGHkVsfTql9pnzPQss88QQWyLKKesjGgZasKpKGsMNBy1RoYPjmSCMejZ5iAYA7HdGVtR3goCM5jcFmyYUzhRZKT06OXBp5U5gmaXXMZY81lyg3nla+bxf58UgWRnaijmFnTAVpDChGY-E4cX0l6M1YYzApY+gVjiE2vU5gnx6hFJkdMJVws8wjHVk01hMLVB6-o-rRJvGZx2mBAJhSgkhLXQPPFCJyqjTMKOdQ3M2YPh5vGkGjgsiuIvQW1avWDFZyMZIQsuAOAEFGxIaQ3aITpn8pfB8JL0Il0uhzfUjhQXDvjjOd7-Xvu-fYP96krHnlhJctsE4NhFDKT9ioOE8MnKNgcHUbkpo1t9c+5gSQuAeUHkG+WEII2juWuW-j1suxhTQ7DGTmEGbSULL-XaPNL2R3I-WwzyQAA5bOAAFVAeB2CwAIPFCAEBAjwWMv4Fg6um3zHKjCMabYXKDg0HyBZvsI5ZEUKdOnH3UBfaV-4VX6vNekAssYjDOO-Mml7WIQ4OREYmDhKcdW4jFATfdVUdJP2-tCoSfYzYWQVDnxNDbmhYI8pKIcoC3TCPpdI7zMnjHVIA-VZDFhNkMIYQjNkKORsCZjiJM2OkBYunThYkR4lmcAAVHb-jAnPGCVnNn-ROc1-XcK4a5gFlKFNEt447enxsjcnqSwxEMwD9eiP-Au3x+T6qXcLbKOGcm+RL7TImxxSDm04gNs4ZeZpBItbyjB+tKKiJtnfiYyX8AAeVwHsyrWaXim8CH0ED-xqUEEAPYBAMVjn2OxDFkCkBGRMGIhNHv1hAfFbG2Fcgg0JUZkQR-wLH8GZ38HKRIEoB6GGx4jAFoNJhSzJk1SFUEEKhOmJwxERmIgIiughx1DbG5GiyOAqFRjLzaDIGwFXC5VaG7kN3YO6AfQgLqVkPkKeEECzkEFoMoCFQqEvDwIyGAXwKKAoWkCsGYW+SjHUBek0IUPwCUM5U1Wn2G0GCbUChI2pVbAwggQIJIX-WGjU35BqAcN+y0MUKzn8F4WKUULJF9HAPo2aUcO0N0MSNzEMMflIU5BOG1DSARDhCfEizyAhEXjsAa00BcHOGZwwHgCiDjigGx1r0EBB2kDkFiQwk0BsSEHEghF4z1CWE2C0AdAPwJDABaPn2ZBIUqh5nBGImvHNBTHKCmnO2sMsClwtkvQLCmLQO5AZgz2JWzzbC7X7AWS2FbzHnkCWGe22Ne2QU8T2MtQOBOF1EXhTDHlCzqHiWSAODHlSGqAvGBOgw6XyVMnK1s0qWeL6jDAZgyFLmFBqFSF+WSGBChHmCsVL3uJlzzGvX5VhRZShNQBhLPDkRlSuIkEX0MC8mUi3SfA5hiwxGgx9T9VJMOhLikDUEcT7zsFHCEJ0yKjykqkwjmk7BZInTZKU0DyMBLn7DKPDwGOf2KEHBBGrkkMIKBOg1QylJ83nxFHFHQihATSqDyFOGujUDZHlQqFUDmA-zEx+kk16XZK9hLhvnU0fhTD73mBhgFEunEUcEenIXi2bivWS0NyKyJhKys081ZQeRdIbE2Df25GUlvHbBKDkltFmADNbFGkqH72kNeivzd0wATLxXsAsFqhGKqDhLhA01AyqCklSGb3IMLK0mLK+0rzLOFVGjKEyBKGrPUCWD5D+PmHSGbybwWRd1R2ZwuQPG7LFHjVHmOGcVkGVKyDKHbHEVKBcjCOnPlw9y9wIQXPmERFOFkEbFMMuhu1sQRDZD+QondUUHPRxPLzRw4G7PIiX21mZnBDMDbxoRFCTBFBTGNHTDGLbJoiPz8U4FP27gXKNlmDsRUBckqAFN7DyHeLDB5CyAxDkHSTgIAP1yQILFAM-NtSBxhBckdxcm7CKANHKjqDzPNzsB6LUSoOzn0MmOlNaL2DDnSHEVUDqGvOVNDjyjtHUxTUCwgtfJkMiKcKgBcJUPIqkB5nFxsHkHwxvMQGGnDBMHUDmBnimikNkskDSOiOzjiKYgSN2J4v1McF1AREwjHm5BpS7TmEFHsAhCjECgvEWhcCAA */
+    /** @xstate-layout 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-qsFskRxkmibmlSBX0Rg0hikifBcgk+SUGkH9uH2ff4+6k+nQTnC4Cd5UAebAAC9uHYDctx+at+CMeFJFUINu0NfJkRkA1xENcoNHkSwVmMCoZFfC531HLMv2IbhYBlEg8H8ICQPAu4N38CBsBo10wGgnd4hreDRA0Ts0hoKp0gtdRoTSdkLAqURwVwi0bxIjNc3Ij5KKIajaPolcHjXVj2M4ihuIrJVqT4uCA2WBRJGFY9UR1YxNAwy8EBkVlymsAVYSBM0X1cU4xTfNTP0LLTcBoh46NwfwAEEACFvH8AANHjlV3fjrOTWZxDEQwbCwmRbHEKThSE4VkUWVJzVqBpAsxELPXU-Nwu06L6MS5KAE10os2k9W2aw7GUOR9jNUboUTdRJCBOTLTUUMAqaO1SNC3NNPamL-DIKAuj6v0spvHJpCUapk0UOtTCk+S4X7Xz1WEUxTGEFSWpazbIp02KunwdgvQpbcMss2sShmFR1VEm80n2KTDlsptTGvJ6wxUV6GuCtbmrC3EIqi7amEeQncHY8hZUwEgniMyCTIO2Daw82ybEjKwMiOVRlCk+MhP5KoXqBBENDEN6yJx7o8e+hjgLAiCN0wPQdpwKAhjMoH+r3ZYZCZFMtAkXCMhWA1HMkYqddhfJ1RKEX1rHNqvo62K9IMzB5cV7BlbpzKrKsJ7cuPJ7HLMVEDVG7YUxeqo1mKxx6pW9N3rFqj7e22BcBIJh-HYVBUs9kGjCwqRlhBNQXuqMwpOyLWPPVeZVBTIFiIx1bVOxja7fx+jU-TzPs961WYK90GbwsJssNhPLjA0KSCpmQTHDkC1Qx1WOgubhO29xrb6LAABHWVWN+qB-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-IUljxSEcDfOwpQgTbMkEigIxL0XVOMnU7Flzrm3JIPc4CTzCV8tJWMil7kipMm7GIReOsmWCkPBNVIIJzpKC5Ty+KSVUqnPOa03A7S8D4vaYSkgAAjWAgg+Bkq+YDAeecFWWlmqNe8cg6jrDcsVUah4MjXmXprWo+qSnIq6sa4VDwrkPBuXch5UqXl2odU6uV3zDqxLHrlHVdRIRzzKp6v1ZosLZFDO-eFTVdEGpjd1E1zSzUWs6d061ab7WCD0M6+V6zpCNgqLYOBuEpqmhmDYOx8l6HdjyY1LGdao0BAbU2i58bRXJslc8-p6bu29uzfTSlebzwrD8isUNU1LRCVNOyUaY08qcPyQixdezdpdFXS2vF7bt2CDfYIrNrrgH+hhuDSwN4b7PWDgGioPJIzdjAxUIMsJI2vvwO+uNCak3ipTT+v9+7AM2OA1hBG2Q9RWBLnWG6dZDzgayHIbsyx0ZcNrSOA1h9-oftxZa79hL2PvHwz6QjvysLbByNJKBMhzxwxyqaDlKg6xWBQ8ivjq6RWJrFRKx5P6+MCcrEJ3NnrjAmBTJaE8rkijLA1fMawdiFEonRDWhdrGl3+EJg8YmpNyaUwFbU8x2LP3cYJS8tzHm0VeYeIIY5JldPmRzZMzWdl6HWDvVHUQXM5DSH5HMM0kHfVKYCCFhcnmKZU0xSZVT671Obq04SwrJMwslci2VygMW1ZxcpQl4UShkseVS1JXymWCrzHNPZCQXLTHmosZgIsfRSxxD7ZJ8w15JNHEyEcPIqTKUvUPF10SNmkKPvnS3XRE3zFZ0sXiQxGcaYwDuOEqpkTokHsHpS2EQl9hmHBOoPmnM3L83zYoWEokHPMac9mU7U3JB5lwBwAgC2VBMgSatpGC8uTxhNiCSMkI8pPTSONsxkPoew7JARn5sT8ha3kseK95GNnQlhEtlYEhNkbPBKg0Hx2RwQ-O5gSQuBJUbhmyWEI83nvuusLUaQx54wcIyDXLkQtZrXgUdza8WF8eTZ55IAActnAACqgPApCCBxQgBAQIkF9KucN3cPt8wKqv3NIKRYOouQbNyhHLIigzoa7O6gSxOv9c2+N6QEyVjSftYDJocwJg0jVFErrFxRQshlBsIg0ox4VhcqJ+wOHYuBr4VmBdOlDGE8GmBLMDRywoWWbhRz96Oe4fkkE2T2sKEmSQkhHMWQ4ICrl4PIoPWhxLORhB0+lj2YAAqoS7sRIeFErOQv+ii4j4e9yo1zAbKUMKRMthirl+vEyK9knLC4RTFy6f+Awlz4X80wJwTuf+-Dy3yPlnpmJkH8KU05nEBIx5ObNIPCU0OYJjcfMHSQWUEmbOTifSd8AAeVwBxXNS-R6Tim8En0EEgNaUEBgPYHgJVlXxewDFkCkDmBMFwlEkyEWDvkQHNFshbEQxpScW2X8H538AaRIEoB6DmzYjAA4PJgKwpnNXlUEAKnMASWM0NFDAkFgS5AyyRnZCG0sAfFAKO0kDIGwFnHFVaB7lcyEO6ACzbR6Q0K0PuEECzkEA4MoHlUUUPGoMWAyCWChDclGniSsDBBBVDHUDehMO0PwF0LFXNSXzm0GD7SBBozkAXiQlDGhDnkPFWDsHBBWBqB8Jh1MJ0Kzn8GERqR0KJE9CQNbStXULSPFUEQsLyKzBsLNCoVZGeg8jSFhGhDoQHWPGALsDmFoRcECn5wwHgCiCOxfzX0EEWDKFyGySQk0B0DckEEEiVSgX2DyFGktDehxDAEGKIPpEoUehehBFwhPGUXRwkDUA+3cMsGrXr3fHWPdXZCZmLxUFLyRimi1g2UqEDmcnZzAM5w-EwSuJAWehNh1HjDymqF2GjGSBvDylSGqAtBhPy32SGUqR8yxU+V+L3CDCZgyFLn5BqFSDBWSABDvHmFsH5DhJlQxUFT8xRL01byMBUU1V7ykQ3yUQDXowsG8m5mG1RDhJjRSibVRKOjsSkDUCKlH0SNEjKiwh2CqlUAWhTEO0xi+O5RcxXTGX5O9jsUp1oWI0rjHWqOrkHSqGhLhL-T5OpMjyOGFEQjvByAcDyEjBujUCZDjxg0yFGjqDhJU1VLNLXwtMZAyFWBM1HzbADW5FmhhMcGRCRktjhLq2K28yiyFSpNix9OTH-3ZHkjPDTxKH63R15mTAtEbBtEc0VMf0sTVMmXsBHhKGTEnXRNiNUBNmVxWBl1wmRF90Jxh3YHLMpX2GYTqhrMNLWC5HBPmByRWC7w2XbK1350eQ3G7PchsAnXHmKjUFjx-wQBT1mEUMjCKiDFkCnKf0D38ANyNz6OTKIOsAkBNiYS0HsDSENjcibCrnjATCOCbFvOz07PnMIk331msBMG3z7xgRjBo3UATCTHP2LPekv1u04Bvx7nnLkE0Fmj8hUAciemuhgQYwBKDA5GvisA+LULIiwOgMtzwNzAQO-KtHKF7FTL9VkEwqKEEh5DmAZTPyqnVBYLYKsLWO9I2L7BouWVUDqCekmhcIy2vHsGnS0FkFTCgt8M4H8MyMCN4vPPdUtCkBelZxsHkFpzkJ5AAojLnmmlUIVOKM0L8KgF0OyJolyNzG-McBNlhGQjynZHZSmibF5HsGoKFmKgKi6KcCAA */
     id: 'Modeling',
 
     tsTypes: {} as import('./modelingMachine.typegen').Typegen0,
@@ -385,10 +385,7 @@ export const modelingMachine = createMachine(
           },
 
           'Line tool': {
-            exit: [
-              // 'tear down client sketch',
-              // 'setup client side sketch segments',
-            ],
+            exit: [],
 
             on: {
               'Set selection': {
@@ -829,13 +826,7 @@ export const modelingMachine = createMachine(
       'reset client scene mouse handlers': () => {
         // when not in sketch mode we don't need any mouse listeners
         // (note the orbit controls are always active though)
-        sceneInfra.setCallbacks({
-          onClick: () => {},
-          onDrag: () => {},
-          onMouseEnter: () => {},
-          onMouseLeave: () => {},
-          onMove: () => {},
-        })
+        sceneInfra.resetMouseListeners()
       },
     },
     // end actions

src/machines/settingsMachine.ts

@@ -3,6 +3,10 @@ import { Themes, getSystemTheme, setThemeClass } from '../lib/theme'
 import { CameraSystem } from 'lib/cameraControls'
 import { Models } from '@kittycad/lib'
 
+const kclManagerPromise = import('lang/KclSingleton').then(
+  (module) => module.kclManager
+)
+
 export const DEFAULT_PROJECT_NAME = 'project-$nnn'
 
 export enum UnitSystem {
@@ -29,7 +33,7 @@ export const settingsMachine = createMachine(
     id: 'Settings',
     predictableActionArguments: true,
     context: {
-      baseUnit: 'in' as BaseUnit,
+      baseUnit: 'mm' as BaseUnit,
       cameraControls: 'KittyCAD' as CameraSystem,
       defaultDirectory: '',
       defaultProjectName: DEFAULT_PROJECT_NAME,
@@ -37,7 +41,7 @@ export const settingsMachine = createMachine(
       showDebugPanel: false,
       textWrapping: 'On' as Toggle,
       theme: Themes.System,
-      unitSystem: UnitSystem.Imperial,
+      unitSystem: UnitSystem.Metric,
     },
     initial: 'idle',
     states: {
@@ -47,13 +51,13 @@ export const settingsMachine = createMachine(
           'Set Base Unit': {
             actions: [
               assign({
-                baseUnit: (_, event) => {
-                  console.log('event', event)
-                  return event.data.baseUnit
-                },
+                baseUnit: (_, event) => event.data.baseUnit,
               }),
               'persistSettings',
               'toastSuccess',
+              async () => {
+                ;(await kclManagerPromise).executeAst()
+              },
             ],
             target: 'idle',
             internal: true,
@@ -134,6 +138,9 @@ export const settingsMachine = createMachine(
               }),
               'persistSettings',
               'toastSuccess',
+              async () => {
+                ;(await kclManagerPromise).executeAst()
+              },
             ],
             target: 'idle',
             internal: true,

src/setupTests.ts

@@ -3,6 +3,11 @@ import { WebSocket } from 'ws'
 import { vi } from 'vitest'
 import 'vitest-webgl-canvas-mock'
 
+import fetch from 'node-fetch'
+
+// @ts-ignore
+globalThis.fetch = fetch
+
 class MockRTCPeerConnection {
   createDataChannel() {
     return

src/wasm-lib/Cargo.lock

@@ -952,6 +952,22 @@ dependencies = [
  "syn 2.0.49",
 ]
 
+[[package]]
+name = "derive-docs"
+version = "0.1.6"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "834580a8bd697658876ed8c9f7727e49f01d34f5b859ca921ac5b99ffc6adf77"
+dependencies = [
+ "convert_case",
+ "once_cell",
+ "proc-macro2",
+ "quote",
+ "regex",
+ "serde",
+ "serde_tokenstream",
+ "syn 2.0.49",
+]
+
 [[package]]
 name = "diesel_derives"
 version = "2.1.2"
@@ -1877,7 +1893,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-lib"
-version = "0.1.40"
+version = "0.1.42"
 dependencies = [
  "anyhow",
  "approx 0.5.1",
@@ -1888,7 +1904,7 @@ dependencies = [
  "criterion",
  "dashmap",
  "databake",
- "derive-docs",
+ "derive-docs 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
  "expectorate",
  "futures",
  "gltf-json",
@@ -1932,9 +1948,9 @@ dependencies = [
 
 [[package]]
 name = "kittycad"
-version = "0.2.53"
+version = "0.2.54"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a086e1a1bbddb3b38959c0f0ce6de6b3a3b7566e38e0b7d5fb101e91911beed4"
+checksum = "13958174d876353f429ea8230dc92fe86f164819cea2e51bbf22e01a4c2a496e"
 dependencies = [
  "anyhow",
  "async-trait",
@@ -1970,7 +1986,7 @@ dependencies = [
 [[package]]
 name = "kittycad-execution-plan"
 version = "0.1.0"
-source = "git+https://github.com/KittyCAD/modeling-api?branch=main#632b75a0242400fa34373d7973b9149b0e08aa3f"
+source = "git+https://github.com/KittyCAD/modeling-api?branch=main#08f05d91062380fe3a69f4baa1f1301532d31977"
 dependencies = [
  "bytes",
  "insta",
@@ -2020,8 +2036,8 @@ dependencies = [
 
 [[package]]
 name = "kittycad-modeling-cmds"
-version = "0.1.17"
-source = "git+https://github.com/KittyCAD/modeling-api?branch=main#632b75a0242400fa34373d7973b9149b0e08aa3f"
+version = "0.1.18"
+source = "git+https://github.com/KittyCAD/modeling-api?branch=main#08f05d91062380fe3a69f4baa1f1301532d31977"
 dependencies = [
  "anyhow",
  "chrono",
@@ -2048,7 +2064,7 @@ dependencies = [
 [[package]]
 name = "kittycad-modeling-session"
 version = "0.1.0"
-source = "git+https://github.com/KittyCAD/modeling-api?branch=main#632b75a0242400fa34373d7973b9149b0e08aa3f"
+source = "git+https://github.com/KittyCAD/modeling-api?branch=main#08f05d91062380fe3a69f4baa1f1301532d31977"
 dependencies = [
  "futures",
  "kittycad",

src/wasm-lib/Cargo.toml

@@ -58,7 +58,7 @@ members = [
 ]
 
 [workspace.dependencies]
-kittycad = { version = "0.2.53", default-features = false, features = ["js", "requests"] }
+kittycad = { version = "0.2.54", default-features = false, features = ["js", "requests"] }
 kittycad-execution-plan = { git = "https://github.com/KittyCAD/modeling-api", branch = "main" }
 kittycad-execution-plan-traits = "0.1.10"
 kittycad-modeling-session = { git = "https://github.com/KittyCAD/modeling-api", branch = "main" }

src/wasm-lib/grackle/src/lib.rs

@@ -202,12 +202,8 @@ impl Planner {
                             ast::types::BinaryOperator::Sub => ep::BinaryOperation::Sub,
                             ast::types::BinaryOperator::Mul => ep::BinaryOperation::Mul,
                             ast::types::BinaryOperator::Div => ep::BinaryOperation::Div,
-                            ast::types::BinaryOperator::Mod => {
-                                todo!("execution plan instruction set doesn't support Mod yet")
-                            }
-                            ast::types::BinaryOperator::Pow => {
-                                todo!("execution plan instruction set doesn't support Pow yet")
-                            }
+                            ast::types::BinaryOperator::Mod => ep::BinaryOperation::Mod,
+                            ast::types::BinaryOperator::Pow => ep::BinaryOperation::Pow,
                         },
                         operand0: ep::Operand::Reference(l_binding),
                         operand1: ep::Operand::Reference(r_binding),

src/wasm-lib/grackle/src/tests.rs

@@ -1145,3 +1145,54 @@ fn arrays_as_parameters() {
         }
     )
 }
+
+#[test]
+fn mod_and_pow() {
+    let program = "
+        let x = 2
+        let y = x^3
+        let z = y % 5
+        ";
+    let (plan, _bindings) = must_plan(program);
+    let addr0 = Address::ZERO;
+    let addr1 = Address::ZERO.offset(1);
+    let addr2 = Address::ZERO.offset(2);
+    let addr3 = Address::ZERO.offset(3);
+    let addr4 = Address::ZERO.offset(4);
+    print!("{:?}", plan);
+    assert_eq!(
+        plan,
+        vec![
+            Instruction::SetPrimitive {
+                address: addr0,
+                value: 2i64.into(),
+            },
+            Instruction::SetPrimitive {
+                address: addr1,
+                value: 3i64.into(),
+            },
+            // x ^ 3, where x = 2
+            Instruction::BinaryArithmetic {
+                arithmetic: ep::BinaryArithmetic {
+                    operation: ep::BinaryOperation::Pow,
+                    operand0: ep::Operand::Reference(addr0),
+                    operand1: ep::Operand::Reference(addr1),
+                },
+                destination: Destination::Address(addr2),
+            },
+            Instruction::SetPrimitive {
+                address: addr3,
+                value: 5i64.into(),
+            },
+            // y % 5, where y is 2^3
+            Instruction::BinaryArithmetic {
+                arithmetic: ep::BinaryArithmetic {
+                    operation: ep::BinaryOperation::Mod,
+                    operand0: ep::Operand::Reference(addr2),
+                    operand1: ep::Operand::Reference(addr3),
+                },
+                destination: Destination::Address(addr4),
+            }
+        ]
+    );
+}

src/wasm-lib/kcl/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-lib"
 description = "KittyCAD Language implementation and tools"
-version = "0.1.40"
+version = "0.1.42"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"
@@ -17,8 +17,8 @@ async-trait = "0.1.77"
 clap = { version = "4.5.0", features = ["cargo", "derive", "env", "unicode"], optional = true }
 dashmap = "5.5.3"
 databake = { version = "0.1.7", features = ["derive"] }
-#derive-docs = { version = "0.1.6" }
-derive-docs = { path = "../derive-docs" }
+derive-docs = { version = "0.1.6" }
+#derive-docs = { path = "../derive-docs" }
 futures = { version = "0.3.30" }
 gltf-json = "1.4.0"
 kittycad = { workspace = true }

src/wasm-lib/kcl/src/executor.rs

@@ -13,7 +13,7 @@ use tower_lsp::lsp_types::{Position as LspPosition, Range as LspRange};
 
 use crate::{
     ast::types::{BodyItem, FunctionExpression, KclNone, Value},
-    engine::EngineConnection,
+    engine::{EngineConnection, EngineManager},
     errors::{KclError, KclErrorDetails},
     fs::FileManager,
     std::{FunctionKind, StdLib},
@@ -950,27 +950,30 @@ pub struct ExecutorContext {
     pub engine: EngineConnection,
     pub fs: FileManager,
     pub stdlib: Arc<StdLib>,
+    pub units: kittycad::types::UnitLength,
 }
 
 impl ExecutorContext {
     /// Create a new default executor context.
     #[cfg(test)]
-    pub async fn new() -> Result<Self> {
+    pub async fn new(units: kittycad::types::UnitLength) -> Result<Self> {
         Ok(Self {
             engine: EngineConnection::new().await?,
             fs: FileManager::new(),
             stdlib: Arc::new(StdLib::new()),
+            units,
         })
     }
 
     /// Create a new default executor context.
     #[cfg(not(test))]
     #[cfg(not(target_arch = "wasm32"))]
-    pub async fn new(ws: reqwest::Upgraded) -> Result<Self> {
+    pub async fn new(ws: reqwest::Upgraded, units: kittycad::types::UnitLength) -> Result<Self> {
         Ok(Self {
             engine: EngineConnection::new(ws).await?,
             fs: FileManager::new(),
             stdlib: Arc::new(StdLib::new()),
+            units,
         })
     }
 }
@@ -983,6 +986,17 @@ pub async fn execute(
     options: BodyType,
     ctx: &ExecutorContext,
 ) -> Result<ProgramMemory, KclError> {
+    // Before we even start executing the program, set the units.
+    ctx.engine
+        .send_modeling_cmd(
+            uuid::Uuid::new_v4(),
+            SourceRange::default(),
+            kittycad::types::ModelingCmd::SetSceneUnits {
+                unit: ctx.units.clone(),
+            },
+        )
+        .await?;
+
     let mut pipe_info = PipeInfo::default();
 
     // Iterate over the body of the program.
@@ -1269,7 +1283,7 @@ mod tests {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast()?;
         let mut mem: ProgramMemory = Default::default();
-        let ctx = ExecutorContext::new().await?;
+        let ctx = ExecutorContext::new(kittycad::types::UnitLength::Mm).await?;
         let memory = execute(program, &mut mem, BodyType::Root, &ctx).await?;
 
         Ok(memory)

src/wasm-lib/kcl/src/parser/parser_impl.rs

@@ -267,6 +267,7 @@ fn binary_operator(i: TokenSlice) -> PResult<BinaryOperator> {
             "/" => BinaryOperator::Div,
             "*" => BinaryOperator::Mul,
             "%" => BinaryOperator::Mod,
+            "^" => BinaryOperator::Pow,
             _ => {
                 return Err(KclError::Syntax(KclErrorDetails {
                     source_ranges: token.as_source_ranges(),

src/wasm-lib/kcl/src/std/utils.rs

@@ -772,3 +772,24 @@ pub fn get_tangent_point_from_previous_arc(
         tangential_angle.to_radians().sin() * 10.0 + last_arc_end[1],
     ]
 }
+
+fn unit_length_to_mm(base_unit: kittycad::types::UnitLength) -> f64 {
+    match base_unit {
+        kittycad::types::UnitLength::Mm => 1.0,
+        kittycad::types::UnitLength::Cm => 10.0,
+        kittycad::types::UnitLength::M => 1000.0,
+        kittycad::types::UnitLength::In => 25.4,
+        kittycad::types::UnitLength::Ft => 304.8,
+        kittycad::types::UnitLength::Yd => 914.4,
+    }
+}
+
+pub fn get_camera_zoom_magnitude_per_unit_length(unit: kittycad::types::UnitLength) -> (f64, f64) {
+    let base_radius = 5.6_f64;
+    let cam_height_distance_ratio = 0.5_f64;
+    let length = unit_length_to_mm(unit) * base_radius * 20.0;
+    let ang = cam_height_distance_ratio.atan();
+    let x = ang.cos() * length;
+    let y = ang.sin() * length;
+    (x, y)
+}

src/wasm-lib/src/lib.rs

@@ -1,327 +1,7 @@
 //! Wasm bindings for `kcl`.
 
 #[cfg(target_arch = "wasm32")]
-use std::sync::{Arc, RwLock};
+mod wasm;
 
 #[cfg(target_arch = "wasm32")]
-use futures::stream::TryStreamExt;
-use gloo_utils::format::JsValueSerdeExt;
-#[cfg(target_arch = "wasm32")]
-use tower_lsp::{LspService, Server};
-use wasm_bindgen::prelude::*;
-
-// wasm_bindgen wrapper for execute
-#[cfg(target_arch = "wasm32")]
-#[wasm_bindgen]
-pub async fn execute_wasm(
-    program_str: &str,
-    memory_str: &str,
-    engine_manager: kcl_lib::engine::conn_wasm::EngineCommandManager,
-    fs_manager: kcl_lib::fs::wasm::FileSystemManager,
-) -> Result<JsValue, String> {
-    // deserialize the ast from a stringified json
-
-    use kcl_lib::executor::ExecutorContext;
-    let program: kcl_lib::ast::types::Program = serde_json::from_str(program_str).map_err(|e| e.to_string())?;
-    let mut mem: kcl_lib::executor::ProgramMemory = serde_json::from_str(memory_str).map_err(|e| e.to_string())?;
-
-    let engine = kcl_lib::engine::EngineConnection::new(engine_manager)
-        .await
-        .map_err(|e| format!("{:?}", e))?;
-    let fs = kcl_lib::fs::FileManager::new(fs_manager);
-    let ctx = ExecutorContext {
-        engine,
-        fs,
-        stdlib: std::sync::Arc::new(kcl_lib::std::StdLib::new()),
-    };
-
-    let memory = kcl_lib::executor::execute(program, &mut mem, kcl_lib::executor::BodyType::Root, &ctx)
-        .await
-        .map_err(String::from)?;
-    // The serde-wasm-bindgen does not work here because of weird HashMap issues so we use the
-    // gloo-serialize crate instead.
-    JsValue::from_serde(&memory).map_err(|e| e.to_string())
-}
-
-// wasm_bindgen wrapper for execute
-#[cfg(target_arch = "wasm32")]
-#[wasm_bindgen]
-pub async fn modify_ast_for_sketch_wasm(
-    manager: kcl_lib::engine::conn_wasm::EngineCommandManager,
-    program_str: &str,
-    sketch_name: &str,
-    plane_type: &str,
-    sketch_id: &str,
-) -> Result<JsValue, String> {
-    // deserialize the ast from a stringified json
-    let mut program: kcl_lib::ast::types::Program = serde_json::from_str(program_str).map_err(|e| e.to_string())?;
-
-    let plane: kcl_lib::executor::PlaneType = serde_json::from_str(plane_type).map_err(|e| e.to_string())?;
-
-    let mut engine = kcl_lib::engine::EngineConnection::new(manager)
-        .await
-        .map_err(|e| format!("{:?}", e))?;
-
-    let _ = kcl_lib::ast::modify::modify_ast_for_sketch(
-        &mut engine,
-        &mut program,
-        sketch_name,
-        plane,
-        uuid::Uuid::parse_str(sketch_id).map_err(|e| e.to_string())?,
-    )
-    .await
-    .map_err(String::from)?;
-
-    // The serde-wasm-bindgen does not work here because of weird HashMap issues so we use the
-    // gloo-serialize crate instead.
-    JsValue::from_serde(&program).map_err(|e| e.to_string())
-}
-
-#[wasm_bindgen]
-pub fn deserialize_files(data: &[u8]) -> Result<JsValue, JsError> {
-    let ws_resp: kittycad::types::WebSocketResponse = bson::from_slice(data)?;
-
-    if let Some(success) = ws_resp.success {
-        if !success {
-            return Err(JsError::new(&format!("Server returned error: {:?}", ws_resp.errors)));
-        }
-    }
-
-    if let Some(kittycad::types::OkWebSocketResponseData::Export { files }) = ws_resp.resp {
-        return Ok(JsValue::from_serde(&files)?);
-    }
-
-    Err(JsError::new(&format!("Invalid response type, got: {:?}", ws_resp)))
-}
-
-// wasm_bindgen wrapper for lexer
-// test for this function and by extension lexer are done in javascript land src/lang/tokeniser.test.ts
-#[wasm_bindgen]
-pub fn lexer_wasm(js: &str) -> Result<JsValue, JsError> {
-    let tokens = kcl_lib::token::lexer(js);
-    Ok(JsValue::from_serde(&tokens)?)
-}
-
-#[wasm_bindgen]
-pub fn parse_wasm(js: &str) -> Result<JsValue, String> {
-    let tokens = kcl_lib::token::lexer(js);
-    let parser = kcl_lib::parser::Parser::new(tokens);
-    let program = parser.ast().map_err(String::from)?;
-    // The serde-wasm-bindgen does not work here because of weird HashMap issues so we use the
-    // gloo-serialize crate instead.
-    JsValue::from_serde(&program).map_err(|e| e.to_string())
-}
-
-// wasm_bindgen wrapper for recast
-// test for this function and by extension the recaster are done in javascript land src/lang/recast.test.ts
-#[wasm_bindgen]
-pub fn recast_wasm(json_str: &str) -> Result<JsValue, JsError> {
-    // deserialize the ast from a stringified json
-    let program: kcl_lib::ast::types::Program = serde_json::from_str(json_str).map_err(JsError::from)?;
-
-    // Use the default options until we integrate into the UI the ability to change them.
-    let result = program.recast(&Default::default(), 0);
-    Ok(JsValue::from_serde(&result)?)
-}
-
-#[cfg(target_arch = "wasm32")]
-#[wasm_bindgen]
-pub struct ServerConfig {
-    into_server: js_sys::AsyncIterator,
-    from_server: web_sys::WritableStream,
-    fs: kcl_lib::fs::wasm::FileSystemManager,
-}
-
-#[cfg(target_arch = "wasm32")]
-#[wasm_bindgen]
-impl ServerConfig {
-    #[wasm_bindgen(constructor)]
-    pub fn new(
-        into_server: js_sys::AsyncIterator,
-        from_server: web_sys::WritableStream,
-        fs: kcl_lib::fs::wasm::FileSystemManager,
-    ) -> Self {
-        Self {
-            into_server,
-            from_server,
-            fs,
-        }
-    }
-}
-
-/// Run the `kcl` lsp server.
-//
-// NOTE: we don't use web_sys::ReadableStream for input here because on the
-// browser side we need to use a ReadableByteStreamController to construct it
-// and so far only Chromium-based browsers support that functionality.
-
-// NOTE: input needs to be an AsyncIterator<Uint8Array, never, void> specifically
-#[cfg(target_arch = "wasm32")]
-#[wasm_bindgen]
-pub async fn kcl_lsp_run(config: ServerConfig) -> Result<(), JsValue> {
-    let ServerConfig {
-        into_server,
-        from_server,
-        fs,
-    } = config;
-
-    let stdlib = kcl_lib::std::StdLib::new();
-    let stdlib_completions = kcl_lib::lsp::kcl::get_completions_from_stdlib(&stdlib).map_err(|e| e.to_string())?;
-    let stdlib_signatures = kcl_lib::lsp::kcl::get_signatures_from_stdlib(&stdlib).map_err(|e| e.to_string())?;
-    // We can unwrap here because we know the tokeniser is valid, since
-    // we have a test for it.
-    let token_types = kcl_lib::token::TokenType::all_semantic_token_types().unwrap();
-
-    let (service, socket) = LspService::new(|client| kcl_lib::lsp::kcl::Backend {
-        client,
-        fs: kcl_lib::fs::FileManager::new(fs),
-        stdlib_completions,
-        stdlib_signatures,
-        token_types,
-        token_map: Default::default(),
-        ast_map: Default::default(),
-        current_code_map: Default::default(),
-        diagnostics_map: Default::default(),
-        symbols_map: Default::default(),
-        semantic_tokens_map: Default::default(),
-    });
-
-    let input = wasm_bindgen_futures::stream::JsStream::from(into_server);
-    let input = input
-        .map_ok(|value| {
-            value
-                .dyn_into::<js_sys::Uint8Array>()
-                .expect("could not cast stream item to Uint8Array")
-                .to_vec()
-        })
-        .map_err(|_err| std::io::Error::from(std::io::ErrorKind::Other))
-        .into_async_read();
-
-    let output = wasm_bindgen::JsCast::unchecked_into::<wasm_streams::writable::sys::WritableStream>(from_server);
-    let output = wasm_streams::WritableStream::from_raw(output);
-    let output = output.try_into_async_write().map_err(|err| err.0)?;
-
-    Server::new(input, output, socket).serve(service).await;
-
-    Ok(())
-}
-
-/// Run the `copilot` lsp server.
-//
-// NOTE: we don't use web_sys::ReadableStream for input here because on the
-// browser side we need to use a ReadableByteStreamController to construct it
-// and so far only Chromium-based browsers support that functionality.
-
-// NOTE: input needs to be an AsyncIterator<Uint8Array, never, void> specifically
-#[cfg(target_arch = "wasm32")]
-#[wasm_bindgen]
-pub async fn copilot_lsp_run(config: ServerConfig, token: String) -> Result<(), JsValue> {
-    let ServerConfig {
-        into_server,
-        from_server,
-        fs,
-    } = config;
-
-    let (service, socket) = LspService::build(|client| kcl_lib::lsp::copilot::Backend {
-        client,
-        fs: kcl_lib::fs::FileManager::new(fs),
-        current_code_map: Default::default(),
-        editor_info: Arc::new(RwLock::new(kcl_lib::lsp::copilot::types::CopilotEditorInfo::default())),
-        cache: kcl_lib::lsp::copilot::cache::CopilotCache::new(),
-        token,
-    })
-    .custom_method("setEditorInfo", kcl_lib::lsp::copilot::Backend::set_editor_info)
-    .custom_method(
-        "getCompletions",
-        kcl_lib::lsp::copilot::Backend::get_completions_cycling,
-    )
-    .custom_method("notifyAccepted", kcl_lib::lsp::copilot::Backend::accept_completions)
-    .custom_method("notifyRejected", kcl_lib::lsp::copilot::Backend::reject_completions)
-    .finish();
-
-    let input = wasm_bindgen_futures::stream::JsStream::from(into_server);
-    let input = input
-        .map_ok(|value| {
-            value
-                .dyn_into::<js_sys::Uint8Array>()
-                .expect("could not cast stream item to Uint8Array")
-                .to_vec()
-        })
-        .map_err(|_err| std::io::Error::from(std::io::ErrorKind::Other))
-        .into_async_read();
-
-    let output = wasm_bindgen::JsCast::unchecked_into::<wasm_streams::writable::sys::WritableStream>(from_server);
-    let output = wasm_streams::WritableStream::from_raw(output);
-    let output = output.try_into_async_write().map_err(|err| err.0)?;
-
-    Server::new(input, output, socket).serve(service).await;
-
-    Ok(())
-}
-
-#[cfg(target_arch = "wasm32")]
-#[wasm_bindgen]
-pub fn is_points_ccw(points: &[f64]) -> i32 {
-    kcl_lib::std::utils::is_points_ccw_wasm(points)
-}
-
-#[cfg(target_arch = "wasm32")]
-#[wasm_bindgen]
-pub struct TangentialArcInfoOutputWasm {
-    /// The geometric center of the arc x.
-    pub center_x: f64,
-    /// The geometric center of the arc y.
-    pub center_y: f64,
-    /// The midpoint of the arc x.
-    pub arc_mid_point_x: f64,
-    /// The midpoint of the arc y.
-    pub arc_mid_point_y: f64,
-    /// The radius of the arc.
-    pub radius: f64,
-    /// Start angle of the arc in radians.
-    pub start_angle: f64,
-    /// End angle of the arc in radians.
-    pub end_angle: f64,
-    /// Flag to determine if the arc is counter clockwise.
-    pub ccw: i32,
-}
-
-#[cfg(target_arch = "wasm32")]
-#[wasm_bindgen]
-pub fn get_tangential_arc_to_info(
-    arc_start_point_x: f64,
-    arc_start_point_y: f64,
-    arc_end_point_x: f64,
-    arc_end_point_y: f64,
-    tan_previous_point_x: f64,
-    tan_previous_point_y: f64,
-    obtuse: bool,
-) -> TangentialArcInfoOutputWasm {
-    let result = kcl_lib::std::utils::get_tangential_arc_to_info(kcl_lib::std::utils::TangentialArcInfoInput {
-        arc_start_point: [arc_start_point_x, arc_start_point_y],
-        arc_end_point: [arc_end_point_x, arc_end_point_y],
-        tan_previous_point: [tan_previous_point_x, tan_previous_point_y],
-        obtuse: obtuse,
-    });
-    TangentialArcInfoOutputWasm {
-        center_x: result.center[0],
-        center_y: result.center[1],
-        arc_mid_point_x: result.arc_mid_point[0],
-        arc_mid_point_y: result.arc_mid_point[1],
-        radius: result.radius,
-        start_angle: result.start_angle,
-        end_angle: result.end_angle,
-        ccw: result.ccw,
-    }
-}
-
-/// Create the default program memory.
-#[cfg(target_arch = "wasm32")]
-#[wasm_bindgen]
-pub fn program_memory_init() -> Result<JsValue, String> {
-    let memory = kcl_lib::executor::ProgramMemory::default();
-
-    // The serde-wasm-bindgen does not work here because of weird HashMap issues so we use the
-    // gloo-serialize crate instead.
-    JsValue::from_serde(&memory).map_err(|e| e.to_string())
-}
+pub use wasm::*;

src/wasm-lib/src/wasm.rs

@@ -0,0 +1,320 @@
+//! Wasm bindings for `kcl`.
+
+use std::{
+    str::FromStr,
+    sync::{Arc, RwLock},
+};
+
+use futures::stream::TryStreamExt;
+use gloo_utils::format::JsValueSerdeExt;
+use tower_lsp::{LspService, Server};
+use wasm_bindgen::prelude::*;
+
+// wasm_bindgen wrapper for execute
+#[wasm_bindgen]
+pub async fn execute_wasm(
+    program_str: &str,
+    memory_str: &str,
+    units: &str,
+    engine_manager: kcl_lib::engine::conn_wasm::EngineCommandManager,
+    fs_manager: kcl_lib::fs::wasm::FileSystemManager,
+) -> Result<JsValue, String> {
+    // deserialize the ast from a stringified json
+
+    use kcl_lib::executor::ExecutorContext;
+    let program: kcl_lib::ast::types::Program = serde_json::from_str(program_str).map_err(|e| e.to_string())?;
+    let mut mem: kcl_lib::executor::ProgramMemory = serde_json::from_str(memory_str).map_err(|e| e.to_string())?;
+    let units = kittycad::types::UnitLength::from_str(units).map_err(|e| e.to_string())?;
+
+    let engine = kcl_lib::engine::EngineConnection::new(engine_manager)
+        .await
+        .map_err(|e| format!("{:?}", e))?;
+    let fs = kcl_lib::fs::FileManager::new(fs_manager);
+    let ctx = ExecutorContext {
+        engine,
+        fs,
+        stdlib: std::sync::Arc::new(kcl_lib::std::StdLib::new()),
+        units,
+    };
+
+    let memory = kcl_lib::executor::execute(program, &mut mem, kcl_lib::executor::BodyType::Root, &ctx)
+        .await
+        .map_err(String::from)?;
+    // The serde-wasm-bindgen does not work here because of weird HashMap issues so we use the
+    // gloo-serialize crate instead.
+    JsValue::from_serde(&memory).map_err(|e| e.to_string())
+}
+
+// wasm_bindgen wrapper for execute
+#[wasm_bindgen]
+pub async fn modify_ast_for_sketch_wasm(
+    manager: kcl_lib::engine::conn_wasm::EngineCommandManager,
+    program_str: &str,
+    sketch_name: &str,
+    plane_type: &str,
+    sketch_id: &str,
+) -> Result<JsValue, String> {
+    // deserialize the ast from a stringified json
+    let mut program: kcl_lib::ast::types::Program = serde_json::from_str(program_str).map_err(|e| e.to_string())?;
+
+    let plane: kcl_lib::executor::PlaneType = serde_json::from_str(plane_type).map_err(|e| e.to_string())?;
+
+    let mut engine = kcl_lib::engine::EngineConnection::new(manager)
+        .await
+        .map_err(|e| format!("{:?}", e))?;
+
+    let _ = kcl_lib::ast::modify::modify_ast_for_sketch(
+        &mut engine,
+        &mut program,
+        sketch_name,
+        plane,
+        uuid::Uuid::parse_str(sketch_id).map_err(|e| e.to_string())?,
+    )
+    .await
+    .map_err(String::from)?;
+
+    // The serde-wasm-bindgen does not work here because of weird HashMap issues so we use the
+    // gloo-serialize crate instead.
+    JsValue::from_serde(&program).map_err(|e| e.to_string())
+}
+
+#[wasm_bindgen]
+pub fn deserialize_files(data: &[u8]) -> Result<JsValue, JsError> {
+    let ws_resp: kittycad::types::WebSocketResponse = bson::from_slice(data)?;
+
+    if let Some(success) = ws_resp.success {
+        if !success {
+            return Err(JsError::new(&format!("Server returned error: {:?}", ws_resp.errors)));
+        }
+    }
+
+    if let Some(kittycad::types::OkWebSocketResponseData::Export { files }) = ws_resp.resp {
+        return Ok(JsValue::from_serde(&files)?);
+    }
+
+    Err(JsError::new(&format!("Invalid response type, got: {:?}", ws_resp)))
+}
+
+// wasm_bindgen wrapper for lexer
+// test for this function and by extension lexer are done in javascript land src/lang/tokeniser.test.ts
+#[wasm_bindgen]
+pub fn lexer_wasm(js: &str) -> Result<JsValue, JsError> {
+    let tokens = kcl_lib::token::lexer(js);
+    Ok(JsValue::from_serde(&tokens)?)
+}
+
+#[wasm_bindgen]
+pub fn parse_wasm(js: &str) -> Result<JsValue, String> {
+    let tokens = kcl_lib::token::lexer(js);
+    let parser = kcl_lib::parser::Parser::new(tokens);
+    let program = parser.ast().map_err(String::from)?;
+    // The serde-wasm-bindgen does not work here because of weird HashMap issues so we use the
+    // gloo-serialize crate instead.
+    JsValue::from_serde(&program).map_err(|e| e.to_string())
+}
+
+// wasm_bindgen wrapper for recast
+// test for this function and by extension the recaster are done in javascript land src/lang/recast.test.ts
+#[wasm_bindgen]
+pub fn recast_wasm(json_str: &str) -> Result<JsValue, JsError> {
+    // deserialize the ast from a stringified json
+    let program: kcl_lib::ast::types::Program = serde_json::from_str(json_str).map_err(JsError::from)?;
+
+    // Use the default options until we integrate into the UI the ability to change them.
+    let result = program.recast(&Default::default(), 0);
+    Ok(JsValue::from_serde(&result)?)
+}
+
+#[wasm_bindgen]
+pub struct ServerConfig {
+    into_server: js_sys::AsyncIterator,
+    from_server: web_sys::WritableStream,
+    fs: kcl_lib::fs::wasm::FileSystemManager,
+}
+
+#[wasm_bindgen]
+impl ServerConfig {
+    #[wasm_bindgen(constructor)]
+    pub fn new(
+        into_server: js_sys::AsyncIterator,
+        from_server: web_sys::WritableStream,
+        fs: kcl_lib::fs::wasm::FileSystemManager,
+    ) -> Self {
+        Self {
+            into_server,
+            from_server,
+            fs,
+        }
+    }
+}
+
+/// Run the `kcl` lsp server.
+//
+// NOTE: we don't use web_sys::ReadableStream for input here because on the
+// browser side we need to use a ReadableByteStreamController to construct it
+// and so far only Chromium-based browsers support that functionality.
+
+// NOTE: input needs to be an AsyncIterator<Uint8Array, never, void> specifically
+#[wasm_bindgen]
+pub async fn kcl_lsp_run(config: ServerConfig) -> Result<(), JsValue> {
+    let ServerConfig {
+        into_server,
+        from_server,
+        fs,
+    } = config;
+
+    let stdlib = kcl_lib::std::StdLib::new();
+    let stdlib_completions = kcl_lib::lsp::kcl::get_completions_from_stdlib(&stdlib).map_err(|e| e.to_string())?;
+    let stdlib_signatures = kcl_lib::lsp::kcl::get_signatures_from_stdlib(&stdlib).map_err(|e| e.to_string())?;
+    // We can unwrap here because we know the tokeniser is valid, since
+    // we have a test for it.
+    let token_types = kcl_lib::token::TokenType::all_semantic_token_types().unwrap();
+
+    let (service, socket) = LspService::new(|client| kcl_lib::lsp::kcl::Backend {
+        client,
+        fs: kcl_lib::fs::FileManager::new(fs),
+        stdlib_completions,
+        stdlib_signatures,
+        token_types,
+        token_map: Default::default(),
+        ast_map: Default::default(),
+        current_code_map: Default::default(),
+        diagnostics_map: Default::default(),
+        symbols_map: Default::default(),
+        semantic_tokens_map: Default::default(),
+    });
+
+    let input = wasm_bindgen_futures::stream::JsStream::from(into_server);
+    let input = input
+        .map_ok(|value| {
+            value
+                .dyn_into::<js_sys::Uint8Array>()
+                .expect("could not cast stream item to Uint8Array")
+                .to_vec()
+        })
+        .map_err(|_err| std::io::Error::from(std::io::ErrorKind::Other))
+        .into_async_read();
+
+    let output = wasm_bindgen::JsCast::unchecked_into::<wasm_streams::writable::sys::WritableStream>(from_server);
+    let output = wasm_streams::WritableStream::from_raw(output);
+    let output = output.try_into_async_write().map_err(|err| err.0)?;
+
+    Server::new(input, output, socket).serve(service).await;
+
+    Ok(())
+}
+
+/// Run the `copilot` lsp server.
+//
+// NOTE: we don't use web_sys::ReadableStream for input here because on the
+// browser side we need to use a ReadableByteStreamController to construct it
+// and so far only Chromium-based browsers support that functionality.
+
+// NOTE: input needs to be an AsyncIterator<Uint8Array, never, void> specifically
+#[wasm_bindgen]
+pub async fn copilot_lsp_run(config: ServerConfig, token: String) -> Result<(), JsValue> {
+    let ServerConfig {
+        into_server,
+        from_server,
+        fs,
+    } = config;
+
+    let (service, socket) = LspService::build(|client| kcl_lib::lsp::copilot::Backend {
+        client,
+        fs: kcl_lib::fs::FileManager::new(fs),
+        current_code_map: Default::default(),
+        editor_info: Arc::new(RwLock::new(kcl_lib::lsp::copilot::types::CopilotEditorInfo::default())),
+        cache: kcl_lib::lsp::copilot::cache::CopilotCache::new(),
+        token,
+    })
+    .custom_method("setEditorInfo", kcl_lib::lsp::copilot::Backend::set_editor_info)
+    .custom_method(
+        "getCompletions",
+        kcl_lib::lsp::copilot::Backend::get_completions_cycling,
+    )
+    .custom_method("notifyAccepted", kcl_lib::lsp::copilot::Backend::accept_completions)
+    .custom_method("notifyRejected", kcl_lib::lsp::copilot::Backend::reject_completions)
+    .finish();
+
+    let input = wasm_bindgen_futures::stream::JsStream::from(into_server);
+    let input = input
+        .map_ok(|value| {
+            value
+                .dyn_into::<js_sys::Uint8Array>()
+                .expect("could not cast stream item to Uint8Array")
+                .to_vec()
+        })
+        .map_err(|_err| std::io::Error::from(std::io::ErrorKind::Other))
+        .into_async_read();
+
+    let output = wasm_bindgen::JsCast::unchecked_into::<wasm_streams::writable::sys::WritableStream>(from_server);
+    let output = wasm_streams::WritableStream::from_raw(output);
+    let output = output.try_into_async_write().map_err(|err| err.0)?;
+
+    Server::new(input, output, socket).serve(service).await;
+
+    Ok(())
+}
+
+#[wasm_bindgen]
+pub fn is_points_ccw(points: &[f64]) -> i32 {
+    kcl_lib::std::utils::is_points_ccw_wasm(points)
+}
+
+#[wasm_bindgen]
+pub struct TangentialArcInfoOutputWasm {
+    /// The geometric center of the arc x.
+    pub center_x: f64,
+    /// The geometric center of the arc y.
+    pub center_y: f64,
+    /// The midpoint of the arc x.
+    pub arc_mid_point_x: f64,
+    /// The midpoint of the arc y.
+    pub arc_mid_point_y: f64,
+    /// The radius of the arc.
+    pub radius: f64,
+    /// Start angle of the arc in radians.
+    pub start_angle: f64,
+    /// End angle of the arc in radians.
+    pub end_angle: f64,
+    /// Flag to determine if the arc is counter clockwise.
+    pub ccw: i32,
+}
+
+#[wasm_bindgen]
+pub fn get_tangential_arc_to_info(
+    arc_start_point_x: f64,
+    arc_start_point_y: f64,
+    arc_end_point_x: f64,
+    arc_end_point_y: f64,
+    tan_previous_point_x: f64,
+    tan_previous_point_y: f64,
+    obtuse: bool,
+) -> TangentialArcInfoOutputWasm {
+    let result = kcl_lib::std::utils::get_tangential_arc_to_info(kcl_lib::std::utils::TangentialArcInfoInput {
+        arc_start_point: [arc_start_point_x, arc_start_point_y],
+        arc_end_point: [arc_end_point_x, arc_end_point_y],
+        tan_previous_point: [tan_previous_point_x, tan_previous_point_y],
+        obtuse: obtuse,
+    });
+    TangentialArcInfoOutputWasm {
+        center_x: result.center[0],
+        center_y: result.center[1],
+        arc_mid_point_x: result.arc_mid_point[0],
+        arc_mid_point_y: result.arc_mid_point[1],
+        radius: result.radius,
+        start_angle: result.start_angle,
+        end_angle: result.end_angle,
+        ccw: result.ccw,
+    }
+}
+
+/// Create the default program memory.
+#[wasm_bindgen]
+pub fn program_memory_init() -> Result<JsValue, String> {
+    let memory = kcl_lib::executor::ProgramMemory::default();
+
+    // The serde-wasm-bindgen does not work here because of weird HashMap issues so we use the
+    // gloo-serialize crate instead.
+    JsValue::from_serde(&memory).map_err(|e| e.to_string())
+}

src/wasm-lib/tests/executor/main.rs

@@ -3,7 +3,7 @@ use kcl_lib::engine::EngineManager;
 
 /// Executes a kcl program and takes a snapshot of the result.
 /// This returns the bytes of the snapshot.
-async fn execute_and_snapshot(code: &str) -> Result<image::DynamicImage> {
+async fn execute_and_snapshot(code: &str, units: kittycad::types::UnitLength) -> Result<image::DynamicImage> {
     let user_agent = concat!(env!("CARGO_PKG_NAME"), ".rs/", env!("CARGO_PKG_VERSION"),);
     let http_client = reqwest::Client::builder()
         .user_agent(user_agent)
@@ -38,9 +38,25 @@ async fn execute_and_snapshot(code: &str) -> Result<image::DynamicImage> {
     let parser = kcl_lib::parser::Parser::new(tokens);
     let program = parser.ast()?;
     let mut mem: kcl_lib::executor::ProgramMemory = Default::default();
-    let ctx = kcl_lib::executor::ExecutorContext::new(ws).await?;
+    let ctx = kcl_lib::executor::ExecutorContext::new(ws, units.clone()).await?;
+
     let _ = kcl_lib::executor::execute(program, &mut mem, kcl_lib::executor::BodyType::Root, &ctx).await?;
 
+    let (x, y) = kcl_lib::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+
+    ctx.engine
+        .send_modeling_cmd(
+            uuid::Uuid::new_v4(),
+            kcl_lib::executor::SourceRange::default(),
+            kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                center: kittycad::types::Point3D { x: 0.0, y: 0.0, z: 0.0 },
+                up: kittycad::types::Point3D { x: 0.0, y: 0.0, z: 1.0 },
+                vantage: kittycad::types::Point3D { x: 0.0, y: -x, z: y },
+                sequence: None,
+            },
+        )
+        .await?;
+
     // Send a snapshot request to the engine.
     let resp = ctx
         .engine
@@ -87,7 +103,9 @@ const part002 = startSketchOn(part001, "here")
   |> extrude(5, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/sketch_on_face.png", &result, 0.999);
 }
 
@@ -115,7 +133,9 @@ const part002 = startSketchOn(part001, "start")
   |> extrude(5, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/sketch_on_face_start.png", &result, 0.999);
 }
 
@@ -143,7 +163,9 @@ const part002 = startSketchOn(part001, "END")
   |> extrude(5, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/sketch_on_face_end.png", &result, 0.999);
 }
 
@@ -162,10 +184,11 @@ async fn serial_test_execute_with_function_sketch() {
 }
 
 const fnBox = box(3, 6, 10)
+"#;
 
-show(fnBox)"#;
-
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/function_sketch.png", &result, 0.999);
 }
 
@@ -183,9 +206,11 @@ async fn serial_test_execute_with_function_sketch_with_position() {
   return myBox
 }
 
-show(box([0,0], 3, 6, 10))"#;
+const thing = box([0,0], 3, 6, 10)"#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image(
         "tests/executor/outputs/function_sketch_with_position.png",
         &result,
@@ -204,10 +229,11 @@ async fn serial_test_execute_with_angled_line() {
   |> line([-13.02, 10.03], %)
   |> close(%)
   |> extrude(4, %)
+"#;
 
-show(part001)"#;
-
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/angled_line.png", &result, 0.999);
 }
 
@@ -231,10 +257,11 @@ const bracket = startSketchOn('XY')
   |> line([0, -leg1 + thickness], %)
   |> close(%)
   |> extrude(width, %)
+"#;
 
-show(bracket)"#;
-
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/parametric.png", &result, 0.999);
 }
 
@@ -266,10 +293,11 @@ const bracket = startSketchAt([0, 0])
   |> line([0, -wallMountL], %)
   |> close(%)
   |> extrude(width, %)
+"#;
 
-show(bracket)"#;
-
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/parametric_with_tan_arc.png", &result, 0.999);
 }
 
@@ -284,7 +312,7 @@ async fn serial_test_execute_engine_error_return() {
   |> extrude(4, %)
 "#;
 
-    let result = execute_and_snapshot(code).await;
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -297,7 +325,9 @@ async fn serial_test_execute_engine_error_return() {
 async fn serial_test_execute_pipes_on_pipes() {
     let code = include_str!("inputs/pipes_on_pipes.kcl");
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/pipes_on_pipes.png", &result, 0.999);
 }
 
@@ -305,7 +335,9 @@ async fn serial_test_execute_pipes_on_pipes() {
 async fn serial_test_execute_cylinder() {
     let code = include_str!("inputs/cylinder.kcl");
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/cylinder.png", &result, 0.999);
 }
 
@@ -314,7 +346,9 @@ async fn serial_test_execute_cylinder() {
 async fn serial_test_execute_kittycad_svg() {
     let code = include_str!("inputs/kittycad_svg.kcl");
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/kittycad_svg.png", &result, 0.999);
 }
 
@@ -335,11 +369,11 @@ const b2 = cube([3,3], 4)
 
 const pt1 = b1.value[0]
 const pt2 = b2.value[0]
+"#;
 
-show(b1)
-show(b2)"#;
-
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image(
         "tests/executor/outputs/member_expression_sketch_group.png",
         &result,
@@ -358,10 +392,11 @@ const body = startSketchOn('XY')
       |> arc({angle_end: 360, angle_start: 0, radius: radius}, %)
       |> close(%)
       |> extrude(height, %)
+"#;
 
-show(body)"#;
-
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/close_arc.png", &result, 0.999);
 }
 
@@ -387,7 +422,9 @@ box(10, 23, 8)
 let thing = box(-12, -15, 10)
 box(-20, -5, 10)"#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/negative_args.png", &result, 0.999);
 }
 
@@ -400,7 +437,9 @@ async fn serial_test_basic_tangential_arc() {
     |> extrude(10, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/tangential_arc.png", &result, 0.999);
 }
 
@@ -413,7 +452,9 @@ async fn serial_test_basic_tangential_arc_with_point() {
     |> extrude(10, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/tangential_arc_with_point.png", &result, 0.999);
 }
 
@@ -426,7 +467,9 @@ async fn serial_test_basic_tangential_arc_to() {
     |> extrude(10, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/tangential_arc_to.png", &result, 0.999);
 }
 
@@ -453,7 +496,9 @@ box(30, 43, 18, '-xy')
 let thing = box(-12, -15, 10, 'yz')
 box(-20, -5, 10, 'xy')"#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image(
         "tests/executor/outputs/different_planes_same_drawing.png",
         &result,
@@ -488,7 +533,6 @@ const bracket = startSketchOn('XY')
   |> close(%)
   |> extrude(width, %)
 
-show(bracket)
 const part001 = startSketchOn('XY')
   |> startProfileAt([-15.53, -10.28], %)
   |> line([10.49, -2.08], %)
@@ -516,7 +560,9 @@ const part004 = startSketchOn('YZ')
   |> close(%)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/lots_of_planes.png", &result, 0.999);
 }
 
@@ -540,11 +586,11 @@ const square = startSketchOn('XY')
   |> hole(circle([2, 2], .5), %)
   |> hole(circle([2, 8], .5), %)
   |> extrude(2, %)
-
-show(square)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/holes.png", &result, 0.999);
 }
 
@@ -560,9 +606,11 @@ async fn optional_params() {
       return sg
   }
 
-  show(circle([2, 2], 20))
+const thing = circle([2, 2], 20)
 "#;
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/optional_params.png", &result, 0.999);
 }
 
@@ -608,10 +656,11 @@ const part = roundedRectangle([0, 0], 20, 20, 4)
   |> hole(circle([-holeIndex, -holeIndex], holeRadius), %)
   |> hole(circle([holeIndex, -holeIndex], holeRadius), %)
   |> extrude(2, %)
+"#;
 
-show(part)"#;
-
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/rounded_with_holes.png", &result, 0.999);
 }
 
@@ -631,7 +680,9 @@ async fn serial_test_top_level_expression() {
 
 circle([0,0], 22) |> extrude(14, %)"#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/top_level_expression.png", &result, 0.999);
 }
 
@@ -653,7 +704,9 @@ const part = circle([0,0], 2)
     |> patternLinear({axis: [0,0,1], repetitions: 12, distance: 2}, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/patterns_linear_basic.png", &result, 0.999);
 }
 
@@ -681,7 +734,9 @@ const part = startSketchOn('XY')
     |> patternLinear({axis: [1, 0,1], repetitions: 3, distance: 6}, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/patterns_linear_basic_3d.png", &result, 0.999);
 }
 
@@ -703,7 +758,9 @@ const part = circle([0,0], 2)
     |> patternLinear({axis: [0,0,1], repetitions: 12, distance: -2}, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image(
         "tests/executor/outputs/patterns_linear_basic_negative_distance.png",
         &result,
@@ -729,7 +786,9 @@ const part = circle([0,0], 2)
     |> patternLinear({axis: [0,0,-1], repetitions: 12, distance: 2}, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image(
         "tests/executor/outputs/patterns_linear_basic_negative_axis.png",
         &result,
@@ -764,7 +823,9 @@ const rectangle = startSketchOn('XY')
 
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/patterns_linear_basic_holes.png", &result, 0.999);
 }
 
@@ -786,7 +847,9 @@ const part = circle([0,0], 2)
     |> patternCircular({axis: [0,0,1], center: [20, 20, 20], repetitions: 12, arcDegrees: 210, rotateDuplicates: true}, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/patterns_circular_basic_2d.png", &result, 0.999);
 }
 
@@ -814,7 +877,9 @@ const part = startSketchOn('XY')
     |> patternCircular({axis: [0,1,0], center: [-20, -20, -20], repetitions: 40, arcDegrees: 360, rotateDuplicates: false}, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/patterns_circular_basic_3d.png", &result, 0.999);
 }
 
@@ -842,7 +907,9 @@ const part = startSketchOn('XY')
     |> patternCircular({axis: [1,1,-1], center: [10, 0, 10], repetitions: 10, arcDegrees: 360, rotateDuplicates: true}, %)
 "#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image(
         "tests/executor/outputs/patterns_circular_3d_tilted_axis.png",
         &result,
@@ -854,7 +921,7 @@ const part = startSketchOn('XY')
 async fn serial_test_import_file_doesnt_exist() {
     let code = r#"const model = import("thing.obj")"#;
 
-    let result = execute_and_snapshot(code).await;
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -866,7 +933,9 @@ async fn serial_test_import_file_doesnt_exist() {
 async fn serial_test_import_obj_with_mtl() {
     let code = r#"const model = import("tests/executor/inputs/cube.obj")"#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/import_obj_with_mtl.png", &result, 0.999);
 }
 
@@ -874,7 +943,9 @@ async fn serial_test_import_obj_with_mtl() {
 async fn serial_test_import_obj_with_mtl_units() {
     let code = r#"const model = import("tests/executor/inputs/cube.obj", {type: "obj", units: "m"})"#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/import_obj_with_mtl_units.png", &result, 0.999);
 }
 
@@ -882,7 +953,9 @@ async fn serial_test_import_obj_with_mtl_units() {
 async fn serial_test_import_gltf_with_bin() {
     let code = r#"const model = import("tests/executor/inputs/cube.gltf")"#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/import_gltf_with_bin.png", &result, 0.999);
 }
 
@@ -890,7 +963,9 @@ async fn serial_test_import_gltf_with_bin() {
 async fn serial_test_import_gltf_embedded() {
     let code = r#"const model = import("tests/executor/inputs/cube-embedded.gltf")"#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/import_gltf_embedded.png", &result, 0.999);
 }
 
@@ -898,7 +973,9 @@ async fn serial_test_import_gltf_embedded() {
 async fn serial_test_import_glb() {
     let code = r#"const model = import("tests/executor/inputs/cube.glb")"#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/import_glb.png", &result, 0.999);
 }
 
@@ -906,7 +983,9 @@ async fn serial_test_import_glb() {
 async fn serial_test_import_glb_no_assign() {
     let code = r#"import("tests/executor/inputs/cube.glb")"#;
 
-    let result = execute_and_snapshot(code).await.unwrap();
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/import_glb_no_assign.png", &result, 0.999);
 }
 
@@ -914,10 +993,148 @@ async fn serial_test_import_glb_no_assign() {
 async fn serial_test_import_ext_doesnt_match() {
     let code = r#"const model = import("tests/executor/inputs/cube.gltf", {type: "obj", units: "m"})"#;
 
-    let result = execute_and_snapshot(code).await;
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
         r#"semantic: KclErrorDetails { source_ranges: [SourceRange([14, 82])], message: "The given format does not match the file extension. Expected: `gltf`, Given: `obj`" }"#
     );
 }
+
+#[tokio::test(flavor = "multi_thread")]
+async fn serial_test_cube_mm() {
+    let code = r#"fn cube = (pos, scale) => {
+  const sg = startSketchOn('XY')
+    |> startProfileAt(pos, %)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+    |> close(%)
+    |> extrude(scale, %)
+
+  return sg
+}
+
+const myCube = cube([0,0], 10)
+"#;
+
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Mm)
+        .await
+        .unwrap();
+    twenty_twenty::assert_image("tests/executor/outputs/cube_mm.png", &result, 1.0);
+}
+
+#[tokio::test(flavor = "multi_thread")]
+async fn serial_test_cube_cm() {
+    let code = r#"fn cube = (pos, scale) => {
+  const sg = startSketchOn('XY')
+    |> startProfileAt(pos, %)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+    |> close(%)
+    |> extrude(scale, %)
+
+  return sg
+}
+
+const myCube = cube([0,0], 10)
+"#;
+
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Cm)
+        .await
+        .unwrap();
+    twenty_twenty::assert_image("tests/executor/outputs/cube_cm.png", &result, 1.0);
+}
+
+#[tokio::test(flavor = "multi_thread")]
+async fn serial_test_cube_m() {
+    let code = r#"fn cube = (pos, scale) => {
+  const sg = startSketchOn('XY')
+    |> startProfileAt(pos, %)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+    |> close(%)
+    |> extrude(scale, %)
+
+  return sg
+}
+
+const myCube = cube([0,0], 10)
+"#;
+
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::M)
+        .await
+        .unwrap();
+    twenty_twenty::assert_image("tests/executor/outputs/cube_m.png", &result, 1.0);
+}
+
+#[tokio::test(flavor = "multi_thread")]
+async fn serial_test_cube_in() {
+    let code = r#"fn cube = (pos, scale) => {
+  const sg = startSketchOn('XY')
+    |> startProfileAt(pos, %)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+    |> close(%)
+    |> extrude(scale, %)
+
+  return sg
+}
+
+const myCube = cube([0,0], 10)
+"#;
+
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::In)
+        .await
+        .unwrap();
+    twenty_twenty::assert_image("tests/executor/outputs/cube_in.png", &result, 1.0);
+}
+
+#[tokio::test(flavor = "multi_thread")]
+async fn serial_test_cube_ft() {
+    let code = r#"fn cube = (pos, scale) => {
+  const sg = startSketchOn('XY')
+    |> startProfileAt(pos, %)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+    |> close(%)
+    |> extrude(scale, %)
+
+  return sg
+}
+
+const myCube = cube([0,0], 10)
+"#;
+
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Ft)
+        .await
+        .unwrap();
+    twenty_twenty::assert_image("tests/executor/outputs/cube_ft.png", &result, 1.0);
+}
+
+#[tokio::test(flavor = "multi_thread")]
+async fn serial_test_cube_yd() {
+    let code = r#"fn cube = (pos, scale) => {
+  const sg = startSketchOn('XY')
+    |> startProfileAt(pos, %)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+    |> close(%)
+    |> extrude(scale, %)
+
+  return sg
+}
+
+const myCube = cube([0,0], 10)
+"#;
+
+    let result = execute_and_snapshot(code, kittycad::types::UnitLength::Yd)
+        .await
+        .unwrap();
+    twenty_twenty::assert_image("tests/executor/outputs/cube_yd.png", &result, 1.0);
+}

src/wasm-lib/tests/modify/main.rs

@@ -37,7 +37,7 @@ async fn setup(code: &str, name: &str) -> Result<(ExecutorContext, Program, uuid
     let parser = kcl_lib::parser::Parser::new(tokens);
     let program = parser.ast()?;
     let mut mem: kcl_lib::executor::ProgramMemory = Default::default();
-    let ctx = kcl_lib::executor::ExecutorContext::new(ws).await?;
+    let ctx = kcl_lib::executor::ExecutorContext::new(ws, kittycad::types::UnitLength::Mm).await?;
     let memory = kcl_lib::executor::execute(program.clone(), &mut mem, kcl_lib::executor::BodyType::Root, &ctx).await?;
 
     // We need to get the sketch ID.

vite.config.ts

@@ -35,7 +35,7 @@ const config = defineConfig({
     viteTsconfigPaths(),
     eslint(),
     version(),
-  ]
+  ],
 })
 
 export default config