Merge branch 'main' into pierremtb/issue5101-Allow-feature-tree-selection-for-point-and-click-Sweep

Relates to #5101

.env.development

@@ -2,8 +2,8 @@ NODE_ENV=development
 DEV=true
 VITE_KC_API_WS_MODELING_URL=wss://api.dev.zoo.dev/ws/modeling/commands
 VITE_KC_API_BASE_URL=https://api.dev.zoo.dev
+BASE_URL=https://api.dev.zoo.dev
 VITE_KC_SITE_BASE_URL=https://dev.zoo.dev
-VITE_KC_SITE_APP_URL=https://app.dev.zoo.dev
 VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=5000
 # ONLY add your token in .env.development.local if you want to skip auth, otherwise this token takes precedence!

.env.production

@@ -1,8 +1,5 @@
-NODE_ENV=production
-DEV=false
 VITE_KC_API_WS_MODELING_URL=wss://api.zoo.dev/ws/modeling/commands
 VITE_KC_API_BASE_URL=https://api.zoo.dev
 VITE_KC_SITE_BASE_URL=https://zoo.dev
-VITE_KC_SITE_APP_URL=https://app.zoo.dev
 VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=15000

.eslintrc

@@ -29,13 +29,6 @@
         {
           "name": "isNaN",
           "message": "Use Number.isNaN() instead."
-        },
-      ],
-      "no-restricted-syntax": [
-        "error",
-        {
-          "selector": "CallExpression[callee.object.name='Array'][callee.property.name='isArray']",
-          "message": "Use isArray() in lib/utils.ts instead of Array.isArray()."
         }
       ],
       "semi": [

.github/workflows/build-apps.yml

@@ -134,6 +134,8 @@ jobs:
           max_attempts: 3
           command: yarn install
 
+      - run: yarn tronb:vite
+
       - name: Prepare certificate and variables (Windows only)
         if: ${{ (env.IS_RELEASE == 'true' || env.IS_NIGHTLY == 'true') && matrix.os == 'windows-2022' }}
         run: |
@@ -163,8 +165,8 @@ jobs:
       - name: Build the app (debug)
         if: ${{ env.IS_RELEASE == 'false' && env.IS_NIGHTLY == 'false' }}
         # electron-builder doesn't have a concept of release vs debug,
-        # this is just not doing any codesign or release yml generation, and points to dev infra
-        run: yarn tronb:package:dev
+        # this is just not doing any codesign or release yml generation
+        run: yarn electron-builder --config
 
       - name: Build the app (release)
         if: ${{ env.IS_RELEASE == 'true' || env.IS_NIGHTLY == 'true' }}
@@ -183,7 +185,7 @@ jobs:
         with:
           timeout_minutes: 10
           max_attempts: 3
-          command: yarn tronb:package:prod
+          command: yarn electron-builder --config --publish always
 
       - name: List artifacts in out/
         run: ls -R out
@@ -244,7 +246,7 @@ jobs:
         with:
           timeout_minutes: 10
           max_attempts: 3
-          command: yarn tronb:package:prod
+          command: yarn electron-builder --config --publish always
 
       - uses: actions/upload-artifact@v4
         if: ${{ env.IS_RELEASE == 'true' }}
@@ -388,19 +390,19 @@ jobs:
 
       - name: Authenticate to Google Cloud
         if: ${{ env.IS_NIGHTLY == 'true' }}
-        uses: 'google-github-actions/auth@v2.1.8'
+        uses: 'google-github-actions/auth@v2.1.7'
         with:
           credentials_json: '${{ secrets.GOOGLE_CLOUD_DL_SA }}'
 
       - name: Set up Google Cloud SDK
         if: ${{ env.IS_NIGHTLY == 'true' }}
-        uses: google-github-actions/setup-gcloud@v2.1.4
+        uses: google-github-actions/setup-gcloud@v2.1.2
         with:
           project_id: ${{ env.GOOGLE_CLOUD_PROJECT_ID }}
 
       - name: Upload nightly files to public bucket
         if: ${{ env.IS_NIGHTLY == 'true' }}
-        uses: google-github-actions/upload-cloud-storage@v2.2.2
+        uses: google-github-actions/upload-cloud-storage@v2.2.1
         with:
           path: out
           glob: '*'

.github/workflows/e2e-tests.yml

@@ -46,15 +46,7 @@ jobs:
     runs-on: ${{ matrix.os }}
     needs: check-rust-changes
     steps:
-    - uses: actions/create-github-app-token@v1
-      id: app-token
-      with:
-        app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
-        private-key: ${{ secrets.MODELING_APP_GH_APP_PRIVATE_KEY }}
-        owner: ${{ github.repository_owner }}
     - uses: actions/checkout@v4
-      with:
-        token: ${{ steps.app-token.outputs.token }}
     - uses: actions/setup-node@v4
       with:
         node-version-file: '.nvmrc'
@@ -131,9 +123,9 @@ jobs:
       if: steps.download-wasm.outcome == 'failure'
       shell: bash
       run: yarn build:wasm
-    - name: build web
+    - name: build electron
       shell: bash
-      run: yarn tronb:vite:dev
+      run: yarn tron:package
     - name: Run ubuntu/chrome snapshots
       if: ${{ matrix.os == 'namespace-profile-ubuntu-8-cores' && matrix.shardIndex == 1 }}
       shell: bash

.github/workflows/publish-apps-release.yml

@@ -108,17 +108,17 @@ jobs:
         run: yarn files:set-notes
 
       - name: Authenticate to Google Cloud
-        uses: 'google-github-actions/auth@v2.1.8'
+        uses: 'google-github-actions/auth@v2.1.7'
         with:
           credentials_json: '${{ secrets.GOOGLE_CLOUD_DL_SA }}'
 
       - name: Set up Google Cloud SDK
-        uses: google-github-actions/setup-gcloud@v2.1.4
+        uses: google-github-actions/setup-gcloud@v2.1.2
         with:
           project_id: ${{ env.GOOGLE_CLOUD_PROJECT_ID }}
 
       - name: Upload release files to public bucket
-        uses: google-github-actions/upload-cloud-storage@v2.2.2
+        uses: google-github-actions/upload-cloud-storage@v2.2.1
         with:
           path: out
           glob: '*'

.gitignore

@@ -25,7 +25,6 @@ yarn-error.log*
 
 .idea
 .vscode
-.helix
 src/wasm-lib/.idea
 src/wasm-lib/.vscode
 
@@ -45,7 +44,7 @@ e2e/playwright/temp3.png
 e2e/playwright/export-snapshots/*
 !e2e/playwright/export-snapshots/*.png
 
-/kcl-samples
+
 /test-results/
 /playwright-report/
 /blob-report/

.helix/config.toml

@@ -1,2 +0,0 @@
-[editor]
-auto-format = true

.helix/languages.toml

@@ -1,10 +0,0 @@
-[language-server.eslint]
-args = ["--stdio"]
-command = "vscode-eslint-language-server"
-
-[[language]]
-name = "typescript"
-auto-format = true
-formatter = { command = "node_modules/.bin/prettier", args = ["--parser", "typescript"] }
-language-servers = [ { name = "eslint", only-features = [ "diagnostics" ] }, "typescript-language-server" ]
-

README.md

@@ -101,7 +101,7 @@ This will start the application and hot-reload on changes.
 
 Devtools can be opened with the usual Cmd-Opt-I (Mac) or Ctrl-Shift-I (Linux and Windows).
 
-To build with electron-builder, run `yarn tronb:package:dev` (or `yarn tronb:package:prod` to point to the .env.production variables)
+To build, run `yarn tron:package`.
 
 ## Checking out commits / Bisecting
 

docs/kcl/appearance.md

@@ -31,12 +31,12 @@ appearance(data: AppearanceData, solid_set: SolidSet) -> SolidSet
 // Add color to an extruded solid.
 exampleSketch = startSketchOn("XZ")
   |> startProfileAt([0, 0], %)
-  |> line(endAbsolute = [10, 0])
-  |> line(endAbsolute = [0, 10])
-  |> line(endAbsolute = [-10, 0])
-  |> close()
+  |> lineTo([10, 0], %)
+  |> lineTo([0, 10], %)
+  |> lineTo([-10, 0], %)
+  |> close(%)
 
-example = extrude(exampleSketch, length = 5)
+example = extrude(5, exampleSketch)
   |> appearance({
        color = '#ff0000',
        metalness = 50,
@@ -65,11 +65,11 @@ sketch001 = startSketchOn('XY')
 fn cube(center) {
   return startSketchOn('XY')
     |> startProfileAt([center[0] - 10, center[1] - 10], %)
-    |> line(endAbsolute = [center[0] + 10, center[1] - 10])
-    |> line(endAbsolute = [center[0] + 10, center[1] + 10])
-    |> line(endAbsolute = [center[0] - 10, center[1] + 10])
-    |> close()
-    |> extrude(length = 10)
+    |> lineTo([center[0] + 10, center[1] - 10], %)
+    |> lineTo([center[0] + 10, center[1] + 10], %)
+    |> lineTo([center[0] - 10, center[1] + 10], %)
+    |> close(%)
+    |> extrude(10, %)
 }
 
 example0 = cube([0, 0])
@@ -95,11 +95,11 @@ appearance({
 // This example shows setting the appearance _after_ the shell.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line(end = [24, 0])
-  |> line(end = [0, -24])
-  |> line(end = [-24, 0])
-  |> close()
-  |> extrude(length = 6)
+  |> line([24, 0], %)
+  |> line([0, -24], %)
+  |> line([-24, 0], %)
+  |> close(%)
+  |> extrude(6, %)
 
 shell({ faces = ['end'], thickness = 0.25 }, firstSketch)
   |> appearance({
@@ -116,11 +116,11 @@ shell({ faces = ['end'], thickness = 0.25 }, firstSketch)
 // This example shows setting the appearance _before_ the shell.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line(end = [24, 0])
-  |> line(end = [0, -24])
-  |> line(end = [-24, 0])
-  |> close()
-  |> extrude(length = 6)
+  |> line([24, 0], %)
+  |> line([0, -24], %)
+  |> line([-24, 0], %)
+  |> close(%)
+  |> extrude(6, %)
   |> appearance({
        color = '#ff0000',
        metalness = 90,
@@ -137,12 +137,12 @@ shell({ faces = ['end'], thickness = 0.25 }, firstSketch)
 // This example shows _before_ the pattern.
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line(end = [0, 2])
-  |> line(end = [3, 1])
-  |> line(end = [0, -4])
-  |> close()
+  |> line([0, 2], %)
+  |> line([3, 1], %)
+  |> line([0, -4], %)
+  |> close(%)
 
-example = extrude(exampleSketch, length = 1)
+example = extrude(1, exampleSketch)
   |> appearance({
        color = '#ff0000',
        metalness = 90,
@@ -162,12 +162,12 @@ example = extrude(exampleSketch, length = 1)
 // This example shows _after_ the pattern.
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line(end = [0, 2])
-  |> line(end = [3, 1])
-  |> line(end = [0, -4])
-  |> close()
+  |> line([0, 2], %)
+  |> line([3, 1], %)
+  |> line([0, -4], %)
+  |> close(%)
 
-example = extrude(exampleSketch, length = 1)
+example = extrude(1, exampleSketch)
   |> patternLinear3d({
        axis = [1, 0, 1],
        instances = 7,
@@ -186,10 +186,10 @@ example = extrude(exampleSketch, length = 1)
 // Color the result of a 2D pattern that was extruded.
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([.5, 25], %)
-  |> line(end = [0, 5])
-  |> line(end = [-1, 0])
-  |> line(end = [0, -5])
-  |> close()
+  |> line([0, 5], %)
+  |> line([-1, 0], %)
+  |> line([0, -5], %)
+  |> close(%)
   |> patternCircular2d({
        center = [0, 0],
        instances = 13,
@@ -197,7 +197,7 @@ exampleSketch = startSketchOn('XZ')
        rotateDuplicates = true
      }, %)
 
-example = extrude(exampleSketch, length = 1)
+example = extrude(1, exampleSketch)
   |> appearance({
        color = '#ff0000',
        metalness = 90,
@@ -214,11 +214,11 @@ example = extrude(exampleSketch, length = 1)
 // Create a path for the sweep.
 sweepPath = startSketchOn('XZ')
   |> startProfileAt([0.05, 0.05], %)
-  |> line(end = [0, 7])
+  |> line([0, 7], %)
   |> tangentialArc({ offset = 90, radius = 5 }, %)
-  |> line(end = [-3, 0])
+  |> line([-3, 0], %)
   |> tangentialArc({ offset = -90, radius = 5 }, %)
-  |> line(end = [0, 7])
+  |> line([0, 7], %)
 
 pipeHole = startSketchOn('XY')
   |> circle({ center = [0, 0], radius = 1.5 }, %)

docs/kcl/fillet.md

@@ -36,12 +36,12 @@ filletRadius = 2
 
 mountingPlateSketch = startSketchOn("XY")
   |> startProfileAt([-width / 2, -length / 2], %)
-  |> line(endAbsolute = [width / 2, -length / 2], tag = $edge1)
-  |> line(endAbsolute = [width / 2, length / 2], tag = $edge2)
-  |> line(endAbsolute = [-width / 2, length / 2], tag = $edge3)
-  |> close(tag = $edge4)
+  |> lineTo([width / 2, -length / 2], %, $edge1)
+  |> lineTo([width / 2, length / 2], %, $edge2)
+  |> lineTo([-width / 2, length / 2], %, $edge3)
+  |> close(%, $edge4)
 
-mountingPlate = extrude(mountingPlateSketch, length = thickness)
+mountingPlate = extrude(thickness, mountingPlateSketch)
   |> fillet({
        radius = filletRadius,
        tags = [
@@ -63,12 +63,12 @@ filletRadius = 1
 
 mountingPlateSketch = startSketchOn("XY")
   |> startProfileAt([-width / 2, -length / 2], %)
-  |> line(endAbsolute = [width / 2, -length / 2], tag = $edge1)
-  |> line(endAbsolute = [width / 2, length / 2], tag = $edge2)
-  |> line(endAbsolute = [-width / 2, length / 2], tag = $edge3)
-  |> close(tag = $edge4)
+  |> lineTo([width / 2, -length / 2], %, $edge1)
+  |> lineTo([width / 2, length / 2], %, $edge2)
+  |> lineTo([-width / 2, length / 2], %, $edge3)
+  |> close(%, $edge4)
 
-mountingPlate = extrude(mountingPlateSketch, length = thickness)
+mountingPlate = extrude(thickness, mountingPlateSketch)
   |> fillet({
        radius = filletRadius,
        tolerance = 0.000001,

docs/kcl/getNextAdjacentEdge.md

@@ -29,14 +29,14 @@ getNextAdjacentEdge(tag: TagIdentifier) -> Uuid
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line(end = [10, 0])
+  |> line([10, 0], %)
   |> angledLine({ angle = 60, length = 10 }, %)
   |> angledLine({ angle = 120, length = 10 }, %)
-  |> line(end = [-10, 0])
+  |> line([-10, 0], %)
   |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
-  |> close()
+  |> close(%)
 
-example = extrude(exampleSketch, length = 5)
+example = extrude(5, exampleSketch)
   |> fillet({
        radius = 3,
        tags = [getNextAdjacentEdge(referenceEdge)]

docs/kcl/getOppositeEdge.md

@@ -29,14 +29,14 @@ getOppositeEdge(tag: TagIdentifier) -> Uuid
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line(end = [10, 0])
+  |> line([10, 0], %)
   |> angledLine({ angle = 60, length = 10 }, %)
   |> angledLine({ angle = 120, length = 10 }, %)
-  |> line(end = [-10, 0])
+  |> line([-10, 0], %)
   |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
-  |> close()
+  |> close(%)
 
-example = extrude(exampleSketch, length = 5)
+example = extrude(5, exampleSketch)
   |> fillet({
        radius = 3,
        tags = [getOppositeEdge(referenceEdge)]

docs/kcl/getPreviousAdjacentEdge.md

@@ -29,14 +29,14 @@ getPreviousAdjacentEdge(tag: TagIdentifier) -> Uuid
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line(end = [10, 0])
+  |> line([10, 0], %)
   |> angledLine({ angle = 60, length = 10 }, %)
   |> angledLine({ angle = 120, length = 10 }, %)
-  |> line(end = [-10, 0])
+  |> line([-10, 0], %)
   |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
-  |> close()
+  |> close(%)
 
-example = extrude(exampleSketch, length = 5)
+example = extrude(5, exampleSketch)
   |> fillet({
        radius = 3,
        tags = [getPreviousAdjacentEdge(referenceEdge)]

docs/kcl/helix.md

@@ -49,7 +49,7 @@ springSketch = startSketchOn('YZ')
 // Create a helix around an edge.
 helper001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line(end = [0, 10], tag = $edge001)
+  |> line([0, 10], %, $edge001)
 
 helixPath = helix({
   angleStart = 0,

docs/kcl/helixRevolutions.md

@@ -30,7 +30,7 @@ helixRevolutions(data: HelixRevolutionsData, solid: Solid) -> Solid
 ```js
 part001 = startSketchOn('XY')
   |> circle({ center = [5, 5], radius = 10 }, %)
-  |> extrude(length = 10)
+  |> extrude(10, %)
   |> helixRevolutions({
        angleStart = 0,
        ccw = true,

docs/kcl/hollow.md

@@ -31,11 +31,11 @@ hollow(thickness: number, solid: Solid) -> Solid
 // Hollow a basic sketch.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line(end = [24, 0])
-  |> line(end = [0, -24])
-  |> line(end = [-24, 0])
-  |> close()
-  |> extrude(length = 6)
+  |> line([24, 0], %)
+  |> line([0, -24], %)
+  |> line([-24, 0], %)
+  |> close(%)
+  |> extrude(6, %)
   |> hollow(0.25, %)
 ```
 
@@ -45,11 +45,11 @@ firstSketch = startSketchOn('XY')
 // Hollow a basic sketch.
 firstSketch = startSketchOn('-XZ')
   |> startProfileAt([-12, 12], %)
-  |> line(end = [24, 0])
-  |> line(end = [0, -24])
-  |> line(end = [-24, 0])
-  |> close()
-  |> extrude(length = 6)
+  |> line([24, 0], %)
+  |> line([0, -24], %)
+  |> line([-24, 0], %)
+  |> close(%)
+  |> extrude(6, %)
   |> hollow(0.5, %)
 ```
 
@@ -60,25 +60,25 @@ firstSketch = startSketchOn('-XZ')
 size = 100
 case = startSketchOn('-XZ')
   |> startProfileAt([-size, -size], %)
-  |> line(end = [2 * size, 0])
-  |> line(end = [0, 2 * size])
+  |> line([2 * size, 0], %)
+  |> line([0, 2 * size], %)
   |> tangentialArcTo([-size, size], %)
-  |> close()
-  |> extrude(length = 65)
+  |> close(%)
+  |> extrude(65, %)
 
 thing1 = startSketchOn(case, 'end')
   |> circle({
        center = [-size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(length = 50)
+  |> extrude(50, %)
 
 thing2 = startSketchOn(case, 'end')
   |> circle({
        center = [size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(length = 50)
+  |> extrude(50, %)
 
 hollow(0.5, case)
 ```

docs/kcl/import.md

@@ -4,16 +4,14 @@ excerpt: "Import a CAD file."
 layout: manual
 ---
 
-**WARNING:** This function is deprecated.
-
 Import a CAD file.
 
-**DEPRECATED** Prefer to use import statements.
-
 For formats lacking unit data (such as STL, OBJ, or PLY files), the default unit of measurement is millimeters. Alternatively you may specify the unit by passing your desired measurement unit in the options parameter. When importing a GLTF file, the bin file will be imported as well. Import paths are relative to the current project directory.
 
 Note: The import command currently only works when using the native Modeling App.
 
+For importing KCL functions using the `import` statement, see the docs on [KCL modules](/docs/kcl/modules).
+
 ```js
 import(file_path: String, options?: ImportFormat) -> ImportedGeometry
 ```

docs/kcl/index.md

@@ -51,6 +51,7 @@ layout: manual
 * [`helixRevolutions`](kcl/helixRevolutions)
 * [`hole`](kcl/hole)
 * [`hollow`](kcl/hollow)
+* [`import`](kcl/import)
 * [`inch`](kcl/inch)
 * [`lastSegX`](kcl/lastSegX)
 * [`lastSegY`](kcl/lastSegY)
@@ -58,6 +59,7 @@ layout: manual
 * [`legAngY`](kcl/legAngY)
 * [`legLen`](kcl/legLen)
 * [`line`](kcl/line)
+* [`lineTo`](kcl/lineTo)
 * [`ln`](kcl/ln)
 * [`loft`](kcl/loft)
 * [`log`](kcl/log)

docs/kcl/int.md

@@ -38,7 +38,7 @@ assertEqual(n, 3, 0.0001, "5/2 = 2.5, rounded up makes 3")
 // Draw n cylinders.
 startSketchOn('XZ')
   |> circle({ center = [0, 0], radius = 2 }, %)
-  |> extrude(length = 5)
+  |> extrude(5, %)
   |> patternTransform(n, fn(id) {
     return { translate = [4 * id, 0, 0] }
   }, %)

docs/kcl/patternCircular3d.md

@@ -31,7 +31,7 @@ patternCircular3d(data: CircularPattern3dData, solid_set: SolidSet) -> [Solid]
 exampleSketch = startSketchOn('XZ')
   |> circle({ center = [0, 0], radius = 1 }, %)
 
-example = extrude(exampleSketch, length = -5)
+example = extrude(-5, exampleSketch)
   |> patternCircular3d({
        axis = [1, -1, 0],
        center = [10, -20, 0],

docs/kcl/patternLinear3d.md

@@ -30,12 +30,12 @@ patternLinear3d(data: LinearPattern3dData, solid_set: SolidSet) -> [Solid]
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line(end = [0, 2])
-  |> line(end = [3, 1])
-  |> line(end = [0, -4])
-  |> close()
+  |> line([0, 2], %)
+  |> line([3, 1], %)
+  |> line([0, -4], %)
+  |> close(%)
 
-example = extrude(exampleSketch, length = 1)
+example = extrude(1, exampleSketch)
   |> patternLinear3d({
        axis = [1, 0, 1],
        instances = 7,

docs/kcl/patternTransform.md

@@ -63,7 +63,7 @@ fn transform(id) {
 // Sketch 4 cylinders.
 sketch001 = startSketchOn('XZ')
   |> circle({ center = [0, 0], radius = 2 }, %)
-  |> extrude(length = 5)
+  |> extrude(5, %)
   |> patternTransform(4, transform, %)
 ```
 
@@ -79,7 +79,7 @@ fn transform(id) {
 
 sketch001 = startSketchOn('XZ')
   |> circle({ center = [0, 0], radius = 2 }, %)
-  |> extrude(length = 5)
+  |> extrude(5, %)
   |> patternTransform(4, transform, %)
 ```
 
@@ -97,12 +97,12 @@ fn cube(length, center) {
 
   return startSketchOn('XY')
     |> startProfileAt(p0, %)
-    |> line(endAbsolute = p1)
-    |> line(endAbsolute = p2)
-    |> line(endAbsolute = p3)
-    |> line(endAbsolute = p0)
-    |> close()
-    |> extrude(length = length)
+    |> lineTo(p1, %)
+    |> lineTo(p2, %)
+    |> lineTo(p3, %)
+    |> lineTo(p0, %)
+    |> close(%)
+    |> extrude(length, %)
 }
 
 width = 20
@@ -135,12 +135,12 @@ fn cube(length, center) {
 
   return startSketchOn('XY')
     |> startProfileAt(p0, %)
-    |> line(endAbsolute = p1)
-    |> line(endAbsolute = p2)
-    |> line(endAbsolute = p3)
-    |> line(endAbsolute = p0)
-    |> close()
-    |> extrude(length = length)
+    |> lineTo(p1, %)
+    |> lineTo(p2, %)
+    |> lineTo(p3, %)
+    |> lineTo(p0, %)
+    |> close(%)
+    |> extrude(length, %)
 }
 
 width = 20
@@ -179,7 +179,7 @@ fn layer() {
   return startSketchOn("XY")
     // or some other plane idk
     |> circle({ center = [0, 0], radius = 1 }, %, $tag1)
-    |> extrude(length = h)
+    |> extrude(h, %)
 }
 // The vase is 100 layers tall.
 // The 100 layers are replica of each other, with a slight transformation applied to each.
@@ -205,7 +205,7 @@ startSketchOn('XY')
        center = [0, 0],
        inscribed = false
      }, %)
-  |> extrude(length = 4)
+  |> extrude(4, %)
   |> patternTransform(3, transform, %)
 ```
 

docs/kcl/segEnd.md

@@ -30,12 +30,12 @@ segEnd(tag: TagIdentifier) -> [number]
 w = 15
 cube = startSketchOn('XY')
   |> startProfileAt([0, 0], %)
-  |> line(end = [w, 0], tag = $line1)
-  |> line(end = [0, w], tag = $line2)
-  |> line(end = [-w, 0], tag = $line3)
-  |> line(end = [0, -w], tag = $line4)
-  |> close()
-  |> extrude(length = 5)
+  |> line([w, 0], %, $line1)
+  |> line([0, w], %, $line2)
+  |> line([-w, 0], %, $line3)
+  |> line([0, -w], %, $line4)
+  |> close(%)
+  |> extrude(5, %)
 
 fn cylinder(radius, tag) {
   return startSketchOn('XY')
@@ -44,7 +44,7 @@ fn cylinder(radius, tag) {
          radius = radius,
          center = segEnd(tag)
        }, %)
-    |> extrude(length = radius)
+    |> extrude(radius, %)
 }
 
 cylinder(1, line1)

docs/kcl/segStart.md

@@ -30,12 +30,12 @@ segStart(tag: TagIdentifier) -> [number]
 w = 15
 cube = startSketchOn('XY')
   |> startProfileAt([0, 0], %)
-  |> line(end = [w, 0], tag = $line1)
-  |> line(end = [0, w], tag = $line2)
-  |> line(end = [-w, 0], tag = $line3)
-  |> line(end = [0, -w], tag = $line4)
-  |> close()
-  |> extrude(length = 5)
+  |> line([w, 0], %, $line1)
+  |> line([0, w], %, $line2)
+  |> line([-w, 0], %, $line3)
+  |> line([0, -w], %, $line4)
+  |> close(%)
+  |> extrude(5, %)
 
 fn cylinder(radius, tag) {
   return startSketchOn('XY')
@@ -44,7 +44,7 @@ fn cylinder(radius, tag) {
          radius = radius,
          center = segStart(tag)
        }, %)
-    |> extrude(length = radius)
+    |> extrude(radius, %)
 }
 
 cylinder(1, line1)

docs/kcl/shell.md

@@ -31,11 +31,11 @@ shell(data: ShellData, solid_set: SolidSet) -> SolidSet
 // Remove the end face for the extrusion.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line(end = [24, 0])
-  |> line(end = [0, -24])
-  |> line(end = [-24, 0])
-  |> close()
-  |> extrude(length = 6)
+  |> line([24, 0], %)
+  |> line([0, -24], %)
+  |> line([-24, 0], %)
+  |> close(%)
+  |> extrude(6, %)
 
 // Remove the end face for the extrusion.
 shell({ faces = ['end'], thickness = 0.25 }, firstSketch)
@@ -47,11 +47,11 @@ shell({ faces = ['end'], thickness = 0.25 }, firstSketch)
 // Remove the start face for the extrusion.
 firstSketch = startSketchOn('-XZ')
   |> startProfileAt([-12, 12], %)
-  |> line(end = [24, 0])
-  |> line(end = [0, -24])
-  |> line(end = [-24, 0])
-  |> close()
-  |> extrude(length = 6)
+  |> line([24, 0], %)
+  |> line([0, -24], %)
+  |> line([-24, 0], %)
+  |> close(%)
+  |> extrude(6, %)
 
 // Remove the start face for the extrusion.
 shell({ faces = ['start'], thickness = 0.25 }, firstSketch)
@@ -63,11 +63,11 @@ shell({ faces = ['start'], thickness = 0.25 }, firstSketch)
 // Remove a tagged face and the end face for the extrusion.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line(end = [24, 0])
-  |> line(end = [0, -24])
-  |> line(end = [-24, 0], tag = $myTag)
-  |> close()
-  |> extrude(length = 6)
+  |> line([24, 0], %)
+  |> line([0, -24], %)
+  |> line([-24, 0], %, $myTag)
+  |> close(%)
+  |> extrude(6, %)
 
 // Remove a tagged face for the extrusion.
 shell({ faces = [myTag], thickness = 0.25 }, firstSketch)
@@ -79,11 +79,11 @@ shell({ faces = [myTag], thickness = 0.25 }, firstSketch)
 // Remove multiple faces at once.
 firstSketch = startSketchOn('XY')
   |> startProfileAt([-12, 12], %)
-  |> line(end = [24, 0])
-  |> line(end = [0, -24])
-  |> line(end = [-24, 0], tag = $myTag)
-  |> close()
-  |> extrude(length = 6)
+  |> line([24, 0], %)
+  |> line([0, -24], %)
+  |> line([-24, 0], %, $myTag)
+  |> close(%)
+  |> extrude(6, %)
 
 // Remove a tagged face and the end face for the extrusion.
 shell({
@@ -99,25 +99,25 @@ shell({
 size = 100
 case = startSketchOn('-XZ')
   |> startProfileAt([-size, -size], %)
-  |> line(end = [2 * size, 0])
-  |> line(end = [0, 2 * size])
+  |> line([2 * size, 0], %)
+  |> line([0, 2 * size], %)
   |> tangentialArcTo([-size, size], %)
-  |> close()
-  |> extrude(length = 65)
+  |> close(%)
+  |> extrude(65, %)
 
 thing1 = startSketchOn(case, 'end')
   |> circle({
        center = [-size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(length = 50)
+  |> extrude(50, %)
 
 thing2 = startSketchOn(case, 'end')
   |> circle({
        center = [size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(length = 50)
+  |> extrude(50, %)
 
 // We put "case" in the shell function to shell the entire object.
 shell({ faces = ['start'], thickness = 5 }, case)
@@ -130,25 +130,25 @@ shell({ faces = ['start'], thickness = 5 }, case)
 size = 100
 case = startSketchOn('XY')
   |> startProfileAt([-size, -size], %)
-  |> line(end = [2 * size, 0])
-  |> line(end = [0, 2 * size])
+  |> line([2 * size, 0], %)
+  |> line([0, 2 * size], %)
   |> tangentialArcTo([-size, size], %)
-  |> close()
-  |> extrude(length = 65)
+  |> close(%)
+  |> extrude(65, %)
 
 thing1 = startSketchOn(case, 'end')
   |> circle({
        center = [-size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(length = 50)
+  |> extrude(50, %)
 
 thing2 = startSketchOn(case, 'end')
   |> circle({
        center = [size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(length = 50)
+  |> extrude(50, %)
 
 // We put "thing1" in the shell function to shell the end face of the object.
 shell({ faces = ['end'], thickness = 5 }, thing1)
@@ -164,25 +164,25 @@ shell({ faces = ['end'], thickness = 5 }, thing1)
 size = 100
 case = startSketchOn('XY')
   |> startProfileAt([-size, -size], %)
-  |> line(end = [2 * size, 0])
-  |> line(end = [0, 2 * size])
+  |> line([2 * size, 0], %)
+  |> line([0, 2 * size], %)
   |> tangentialArcTo([-size, size], %)
-  |> close()
-  |> extrude(length = 65)
+  |> close(%)
+  |> extrude(65, %)
 
 thing1 = startSketchOn(case, 'end')
   |> circle({
        center = [-size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(length = 50)
+  |> extrude(50, %)
 
 thing2 = startSketchOn(case, 'end')
   |> circle({
        center = [size / 2, -size / 2],
        radius = 25
      }, %)
-  |> extrude(length = 50)
+  |> extrude(50, %)
 
 // We put "thing1" and "thing2" in the shell function to shell the end face of the object.
 shell({ faces = ['end'], thickness = 5 }, [thing1, thing2])

docs/kcl/sweep.md

@@ -34,11 +34,11 @@ sweep(data: SweepData, sketch: Sketch) -> Solid
 // Create a path for the sweep.
 sweepPath = startSketchOn('XZ')
   |> startProfileAt([0.05, 0.05], %)
-  |> line(end = [0, 7])
+  |> line([0, 7], %)
   |> tangentialArc({ offset = 90, radius = 5 }, %)
-  |> line(end = [-3, 0])
+  |> line([-3, 0], %)
   |> tangentialArc({ offset = -90, radius = 5 }, %)
-  |> line(end = [0, 7])
+  |> line([0, 7], %)
 
 // Create a hole for the pipe.
 pipeHole = startSketchOn('XY')