Revert "Fix isomorphic-copy to work on Windows (#5417)" (#5424)

This reverts commit 18d87b99bd.

docs/kcl/lastSegX.md

@@ -17,7 +17,7 @@ lastSegX(sketch: Sketch) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | The sketch whose line segment is being queried | Yes |
 
 ### Returns
 

docs/kcl/lastSegY.md

@@ -17,7 +17,7 @@ lastSegY(sketch: Sketch) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | The sketch whose line segment is being queried | Yes |
 
 ### Returns
 

docs/kcl/modules.md

@@ -57,3 +57,55 @@ Imported symbols can be renamed for convenience or to avoid name collisions.
 ```
 import increment as inc, decrement as dec from "util.kcl"
 ```
+
+## Importing files from other CAD systems
+
+`import` can also be used to import files from other CAD systems. The format of the statement is the
+same as for KCL files. You can only import the whole file, not items from it. E.g.,
+
+```
+import "tests/inputs/cube.obj"
+
+// Use `cube` just like a KCL object.
+```
+
+```
+import "tests/inputs/cube-2.sldprt" as cube
+
+// Use `cube` just like a KCL object.
+```
+
+You can make the file format explicit using a format attribute (useful if using a different
+extension), e.g.,
+
+```
+@(format = obj)
+import "tests/inputs/cube"
+```
+
+For formats lacking unit data (such as STL, OBJ, or PLY files), the default
+unit of measurement is millimeters. Alternatively you may specify the unit
+by using an attirbute. Likewise, you can also specify a coordinate system. E.g.,
+
+```
+@(unitLength = ft, coords = opengl)
+import "tests/inputs/cube.obj"
+```
+
+When importing a GLTF file, the bin file will be imported as well.
+
+Import paths are relative to the current project directory. Imports currently only work when
+using the native Modeling App, not in the browser.
+
+### Supported values
+
+File formats: `fbx`, `gltf`/`glb`, `obj`+, `ply`+, `sldprt`, `step`/`stp`, `stl`+. (Those marked with a
+'+' support customising the length unit and coordinate system).
+
+Length units: `mm` (the default), `cm`, `m`, `inch`, `ft`, `yd`.
+
+Coordinate systems:
+
+- `zoo` (the default), forward: -Y, up: +Z, handedness: right
+- `opengl`, forward: +Z, up: +Y, handedness: right
+- `vulkan`, forward: +Z, up: -Y, handedness: left

docs/kcl/patternCircular2d.md

@@ -9,7 +9,7 @@ Repeat a 2-dimensional sketch some number of times along a partial or
 complete circle some specified number of times. Each object may additionally be rotated along the circle, ensuring orentation of the solid with respect to the center of the circle is maintained.
 
 ```js
-patternCircular2d(data: CircularPattern2dData, sketch_set: SketchSet) -> [Sketch]
+patternCircular2d(sketch_set: SketchSet, instances: integer, center: [number], arc_degrees: number, rotate_duplicates: bool, use_original?: bool) -> [Sketch]
 ```
 
 
@@ -17,8 +17,12 @@ patternCircular2d(data: CircularPattern2dData, sketch_set: SketchSet) -> [Sketch
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `data` | [`CircularPattern2dData`](/docs/kcl/types/CircularPattern2dData) | Data for a circular pattern on a 2D sketch. | Yes |
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
+| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketch(es) to pattern | Yes |
+| `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
+| `center` | `[number]` | The center about which to make the pattern. This is a 2D vector. | Yes |
+| `arc_degrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
+| `rotate_duplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
+| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 
@@ -34,12 +38,12 @@ exampleSketch = startSketchOn('XZ')
   |> line(end = [-1, 0])
   |> line(end = [0, -5])
   |> close()
-  |> patternCircular2d({
+  |> patternCircular2d(
        center = [0, 0],
        instances = 13,
        arcDegrees = 360,
-       rotateDuplicates = true
-     }, %)
+       rotateDuplicates = true,
+     )
 
 example = extrude(exampleSketch, length = 1)
 ```

docs/kcl/segEnd.md

@@ -17,7 +17,7 @@ segEnd(tag: TagIdentifier) -> [number]
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) |  | Yes |
+| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 

docs/kcl/segEndX.md

@@ -17,7 +17,7 @@ segEndX(tag: TagIdentifier) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) |  | Yes |
+| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 

docs/kcl/segStartX.md

@@ -17,7 +17,7 @@ segStartX(tag: TagIdentifier) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) |  | Yes |
+| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 

docs/kcl/segStartY.md

@@ -17,7 +17,7 @@ segStartY(tag: TagIdentifier) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) |  | Yes |
+| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 

docs/kcl/types/EnvironmentRef.md

@@ -0,0 +1,16 @@
+---
+title: "EnvironmentRef"
+excerpt: ""
+layout: manual
+---
+
+
+[`SnapshotRef`](/docs/kcl/types/SnapshotRef)
+
+
+
+
+
+
+
+

docs/kcl/types/Face.md

@@ -19,8 +19,8 @@ A face.
 | `id` |`string`| The id of the face. | No |
 | `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
 | `value` |`string`| The tag of the face. | No |
-| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face’s X axis be? | No |
-| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face’s Y axis be? | No |
+| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face's X axis be? | No |
+| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face's Y axis be? | No |
 | `zAxis` |[`Point3d`](/docs/kcl/types/Point3d)| The z-axis (normal). | No |
 | `solid` |[`Solid`](/docs/kcl/types/Solid)| The solid the face is on. | No |
 | `units` |[`UnitLen`](/docs/kcl/types/UnitLen)| A face. | No |

docs/kcl/types/KclValue.md

@@ -59,23 +59,7 @@ Any KCL value.
 |----------|------|-------------|----------|
 | `type` |enum: `Number`|  | No |
 | `value` |`number`|  | No |
-| `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Int`|  | No |
-| `value` |`integer`|  | No |
+| `ty` |[`NumericType`](/docs/kcl/types/NumericType)| Any KCL value. | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |
 
 
@@ -311,7 +295,7 @@ Data for an imported geometry.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `type` |enum: `Function`|  | No |
-| `memory` |[`ProgramMemory`](/docs/kcl/types/ProgramMemory)| Any KCL value. | No |
+| `memory` |[`EnvironmentRef`](/docs/kcl/types/EnvironmentRef)| Any KCL value. | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |
 
 
@@ -351,6 +335,23 @@ Data for an imported geometry.
 
 ----
 
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Tombstone`|  | No |
+| `value` |`null`|  | No |
+| `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |
+
+
+----
+
 
 
 

docs/kcl/types/NumericType.md

@@ -0,0 +1,250 @@
+---
+title: "NumericType"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+
+**This schema accepts exactly one of the following:**
+
+
+**Type:** `object`
+
+
+
+**This schema accepts exactly one of the following:**
+
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Count`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+**This schema accepts exactly one of the following:**
+
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Mm`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Cm`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `M`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Inches`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Feet`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Yards`|  | No |
+
+
+----
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Length`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+**This schema accepts exactly one of the following:**
+
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Degrees`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Radians`|  | No |
+
+
+----
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Angle`|  | No |
+
+
+----
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Known`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Default`|  | No |
+| `len` |[`UnitLen`](/docs/kcl/types/UnitLen)|  | No |
+| `angle` |[`UnitAngle`](/docs/kcl/types/UnitAngle)|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Unknown`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Any`|  | No |
+
+
+----
+
+
+
+

docs/kcl/types/Path.md

@@ -98,6 +98,29 @@ a complete arc
 | `__geoMeta` |[`GeoMeta`](/docs/kcl/types/GeoMeta)| Metadata. | No |
 
 
+----
+A base path.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `CircleThreePoint`|  | No |
+| `p1` |`[number, number]`| Point 1 of the circle | No |
+| `p2` |`[number, number]`| Point 2 of the circle | No |
+| `p3` |`[number, number]`| Point 3 of the circle | No |
+| `from` |`[number, number]`| The from point. | No |
+| `to` |`[number, number]`| The to point. | No |
+| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag of the path. | No |
+| `__geoMeta` |[`GeoMeta`](/docs/kcl/types/GeoMeta)| Metadata. | No |
+
+
 ----
 A path that is horizontal.
 

docs/kcl/types/Plane.md

@@ -20,8 +20,8 @@ A plane.
 | `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
 | `value` |[`PlaneType`](/docs/kcl/types/PlaneType)| A plane. | No |
 | `origin` |[`Point3d`](/docs/kcl/types/Point3d)| Origin of the plane. | No |
-| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane’s X axis be? | No |
-| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane’s Y axis be? | No |
+| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane's X axis be? | No |
+| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane's Y axis be? | No |
 | `zAxis` |[`Point3d`](/docs/kcl/types/Point3d)| The z-axis (normal). | No |
 | `units` |[`UnitLen`](/docs/kcl/types/UnitLen)| A plane. | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |

docs/kcl/types/ProgramMemory.md

@@ -17,6 +17,5 @@ layout: manual
 |----------|------|-------------|----------|
 | `environments` |`[` [`Environment`](/docs/kcl/types/Environment) `]`|  | No |
 | `currentEnv` |`integer`|  | No |
-| `return` |[`KclValue`](/docs/kcl/types/KclValue)|  | No |
 
 

docs/kcl/types/SketchSurface.md

@@ -29,8 +29,8 @@ A plane.
 | `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
 | `value` |[`PlaneType`](/docs/kcl/types/PlaneType)| A sketch type. | No |
 | `origin` |[`Point3d`](/docs/kcl/types/Point3d)| Origin of the plane. | No |
-| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane’s X axis be? | No |
-| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane’s Y axis be? | No |
+| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane's X axis be? | No |
+| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane's Y axis be? | No |
 | `zAxis` |[`Point3d`](/docs/kcl/types/Point3d)| The z-axis (normal). | No |
 | `units` |[`UnitLen`](/docs/kcl/types/UnitLen)| A sketch type. | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |
@@ -53,8 +53,8 @@ A face.
 | `id` |`string`| The id of the face. | No |
 | `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
 | `value` |`string`| The tag of the face. | No |
-| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face’s X axis be? | No |
-| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face’s Y axis be? | No |
+| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face's X axis be? | No |
+| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face's Y axis be? | No |
 | `zAxis` |[`Point3d`](/docs/kcl/types/Point3d)| The z-axis (normal). | No |
 | `solid` |[`Solid`](/docs/kcl/types/Solid)| The solid the face is on. | No |
 | `units` |[`UnitLen`](/docs/kcl/types/UnitLen)| A sketch type. | No |

docs/kcl/types/SnapshotRef.md

@@ -0,0 +1,16 @@
+---
+title: "SnapshotRef"
+excerpt: "An index pointing to a snapshot within a specific (unspecified) environment."
+layout: manual
+---
+
+An index pointing to a snapshot within a specific (unspecified) environment.
+
+**Type:** `integer` (`uint`)
+
+
+
+
+
+
+

docs/kcl/types/UnitAngle.md

@@ -0,0 +1,47 @@
+---
+title: "UnitAngle"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+
+**This schema accepts exactly one of the following:**
+
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Degrees`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Radians`|  | No |
+
+
+----
+
+
+
+

docs/kcl/types/UnitType.md

@@ -0,0 +1,186 @@
+---
+title: "UnitType"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+
+**This schema accepts exactly one of the following:**
+
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Count`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+**This schema accepts exactly one of the following:**
+
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Mm`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Cm`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `M`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Inches`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Feet`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Yards`|  | No |
+
+
+----
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Length`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+**This schema accepts exactly one of the following:**
+
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Degrees`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Radians`|  | No |
+
+
+----
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Angle`|  | No |
+
+
+----
+
+
+
+

e2e/playwright/basic-sketch.spec.ts

@@ -54,23 +54,26 @@ async function doBasicSketch(
   const startXPx = 600
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)`)
+    await expect(u.codeLocator).toContainText(
+      `sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
+    )
   }
   await page.waitForTimeout(500)
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(500)
 
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)
+    await expect(u.codeLocator)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
   |> xLine(${commonPoints.num1}, %)`)
   }
   await page.waitForTimeout(500)
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)
+    await expect(u.codeLocator)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+      commonPoints.startAt
+    }, sketch001)
   |> xLine(${commonPoints.num1}, %)
   |> yLine(${commonPoints.num1 + 0.01}, %)`)
   } else {
@@ -79,8 +82,10 @@ async function doBasicSketch(
   await page.waitForTimeout(200)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)
+    await expect(u.codeLocator)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+      commonPoints.startAt
+    }, sketch001)
   |> xLine(${commonPoints.num1}, %)
   |> yLine(${commonPoints.num1 + 0.01}, %)
   |> xLine(${commonPoints.num2 * -1}, %)`)
@@ -137,8 +142,10 @@ async function doBasicSketch(
 
   // Open the code pane.
   await u.openKclCodePanel()
-  await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)
+  await expect(u.codeLocator)
+    .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+    commonPoints.startAt
+  }, sketch001)
   |> xLine(${commonPoints.num1}, %, $seg01)
   |> yLine(${commonPoints.num1 + 0.01}, %)
   |> xLine(-segLen(seg01), %)`)

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -43,8 +43,7 @@ test.describe(
         },
       }
 
-      const code = `sketch001 = startSketchOn('${plane}')
-    |> startProfileAt([0.9, -1.22], %)`
+      const code = `sketch001 = startSketchOn('${plane}')profile001 = startProfileAt([0.9, -1.22], sketch001)`
 
       await u.openDebugPanel()
 

e2e/playwright/feature-tree-pane.spec.ts

@@ -24,7 +24,7 @@ sketch001 = startSketchOn('XZ')
 revolve001 = revolve({ axis = "X" }, sketch001)
 triangle()
   |> extrude(length = 30)
-plane001 = offsetPlane('XY', 10)
+plane001 = offsetPlane('XY', offset = 10)
 sketch002 = startSketchOn(plane001)
   |> startProfileAt([-20, 0], %)
   |> line(end = [5, -15])
@@ -35,7 +35,7 @@ sketch002 = startSketchOn(plane001)
 extrude001 = extrude(sketch002, length = 10)
 `
 
-const FEAUTRE_TREE_SKETCH_CODE = `sketch001 = startSketchOn('XZ')
+const FEATURE_TREE_SKETCH_CODE = `sketch001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> angledLine([0, 4], %, $rectangleSegmentA001)
   |> angledLine([
@@ -54,7 +54,7 @@ sketch002 = startSketchOn(extrude001, rectangleSegmentB001)
        center = [-1, 2],
        radius = .5
      }, %)
-plane001 = offsetPlane('XZ', -5)
+plane001 = offsetPlane('XZ', offset = -5)
 sketch003 = startSketchOn(plane001)
   |> circle({ center = [0, 0], radius = 5 }, %)
 `
@@ -116,7 +116,7 @@ test.describe('Feature Tree pane', () => {
       await testViewSource({
         operationName: 'Offset Plane',
         operationIndex: 0,
-        expectedActiveLine: "plane001 = offsetPlane('XY', 10)",
+        expectedActiveLine: "plane001 = offsetPlane('XY', offset = 10)",
       })
       await testViewSource({
         operationName: 'Extrude',
@@ -153,33 +153,16 @@ test.describe('Feature Tree pane', () => {
     `User can edit sketch (but not on offset plane yet) from the feature tree`,
     { tag: '@electron' },
     async ({ context, homePage, scene, editor, toolbar, page }) => {
-      const unavailableToastMessage = page.getByText(
-        'Editing sketches on faces or offset planes through the feature tree is not yet supported'
-      )
+      await context.addInitScript((initialCode) => {
+        localStorage.setItem('persistCode', initialCode)
+      }, FEATURE_TREE_SKETCH_CODE)
+      await page.setBodyDimensions({ width: 1000, height: 500 })
+      await homePage.goToModelingScene()
 
-      await context.folderSetupFn(async (dir) => {
-        const bracketDir = join(dir, 'test-sample')
-        await fsp.mkdir(bracketDir, { recursive: true })
-        await fsp.writeFile(
-          join(bracketDir, 'main.kcl'),
-          FEAUTRE_TREE_SKETCH_CODE,
-          'utf-8'
-        )
-      })
-
-      await test.step('setup test', async () => {
-        await homePage.expectState({
-          projectCards: [
-            {
-              title: 'test-sample',
-              fileCount: 1,
-            },
-          ],
-          sortBy: 'last-modified-desc',
-        })
-        await homePage.openProject('test-sample')
-        await scene.waitForExecutionDone()
-        await toolbar.openFeatureTreePane()
+      await test.step('force re-exe', async () => {
+        await page.waitForTimeout(1000)
+        await editor.replaceCode('90', '91')
+        await page.waitForTimeout(1500)
       })
 
       await test.step('On a default plane should work', async () => {
@@ -199,24 +182,23 @@ test.describe('Feature Tree pane', () => {
       await test.step('On an extrude face should *not* work', async () => {
         // Tooltip is getting in the way of clicking, so I'm first closing the pane
         await toolbar.closeFeatureTreePane()
+        await page.waitForTimeout(1000)
+        await editor.replaceCode('91', '90')
+        await page.waitForTimeout(2000)
         await (await toolbar.getFeatureTreeOperation('Sketch', 1)).dblclick()
+
         await expect(
-          unavailableToastMessage,
-          'We should see a toast message about this'
+          toolbar.exitSketchBtn,
+          'We should be in sketch mode now'
         ).toBeVisible()
-        await unavailableToastMessage.waitFor({ state: 'detached' })
-        // TODO - turn on once we update the artifactGraph in Rust
-        // to include the proper source location for the extrude face
-        // await expect(
-        //   toolbar.exitSketchBtn,
-        //   'We should be in sketch mode now'
-        // ).toBeVisible()
-        // await editor.expectState({
-        //   highlightedCode: '',
-        //   diagnostics: [],
-        //   activeLines: ['|>circle({center=[-1,2],radius=.5},%)'],
-        // })
-        // await toolbar.exitSketchBtn.click()
+        await editor.expectState({
+          highlightedCode: '',
+          diagnostics: [],
+          activeLines: [
+            'sketch002=startSketchOn(extrude001,rectangleSegmentB001)',
+          ],
+        })
+        await toolbar.exitSketchBtn.click()
       })
 
       await test.step('On an offset plane should *not* work', async () => {
@@ -226,7 +208,7 @@ test.describe('Feature Tree pane', () => {
         await editor.expectState({
           highlightedCode: '',
           diagnostics: [],
-          activeLines: ['|>circle({center=[0,0],radius=5},%)'],
+          activeLines: ['sketch003=startSketchOn(plane001)'],
         })
         await expect(
           toolbar.exitSketchBtn,
@@ -342,7 +324,8 @@ test.describe('Feature Tree pane', () => {
     toolbar,
     cmdBar,
   }) => {
-    const testCode = (value: string) => `p = offsetPlane('XY', ${value})`
+    const testCode = (value: string) =>
+      `p = offsetPlane('XY', offset = ${value})`
     const initialInput = '10'
     const initialCode = testCode(initialInput)
     const newInput = '5 + 10'

e2e/playwright/fixtures/sceneFixture.ts

@@ -1,6 +1,6 @@
 import type { Page, Locator } from '@playwright/test'
 import { expect } from '@playwright/test'
-import { uuidv4 } from 'lib/utils'
+import { isArray, uuidv4 } from 'lib/utils'
 import {
   closeDebugPanel,
   doAndWaitForImageDiff,
@@ -9,13 +9,15 @@ import {
   sendCustomCmd,
 } from '../test-utils'
 
-type mouseParams = {
+type MouseParams = {
   pixelDiff?: number
+  shouldDbClick?: boolean
+  delay?: number
 }
-type mouseDragToParams = mouseParams & {
+type MouseDragToParams = MouseParams & {
   fromPoint: { x: number; y: number }
 }
-type mouseDragFromParams = mouseParams & {
+type MouseDragFromParams = MouseParams & {
   toPoint: { x: number; y: number }
 }
 
@@ -26,12 +28,12 @@ type SceneSerialised = {
   }
 }
 
-type ClickHandler = (clickParams?: mouseParams) => Promise<void | boolean>
-type MoveHandler = (moveParams?: mouseParams) => Promise<void | boolean>
-type DblClickHandler = (clickParams?: mouseParams) => Promise<void | boolean>
-type DragToHandler = (dragParams: mouseDragToParams) => Promise<void | boolean>
+type ClickHandler = (clickParams?: MouseParams) => Promise<void | boolean>
+type MoveHandler = (moveParams?: MouseParams) => Promise<void | boolean>
+type DblClickHandler = (clickParams?: MouseParams) => Promise<void | boolean>
+type DragToHandler = (dragParams: MouseDragToParams) => Promise<void | boolean>
 type DragFromHandler = (
-  dragParams: mouseDragFromParams
+  dragParams: MouseDragFromParams
 ) => Promise<void | boolean>
 
 export class SceneFixture {
@@ -77,17 +79,26 @@ export class SceneFixture {
     { steps }: { steps: number } = { steps: 20 }
   ): [ClickHandler, MoveHandler, DblClickHandler] =>
     [
-      (clickParams?: mouseParams) => {
+      (clickParams?: MouseParams) => {
         if (clickParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
-            () => this.page.mouse.click(x, y),
+            () =>
+              clickParams?.shouldDbClick
+                ? this.page.mouse.dblclick(x, y, {
+                    delay: clickParams?.delay || 0,
+                  })
+                : this.page.mouse.click(x, y, {
+                    delay: clickParams?.delay || 0,
+                  }),
             clickParams.pixelDiff
           )
         }
-        return this.page.mouse.click(x, y)
+        return clickParams?.shouldDbClick
+          ? this.page.mouse.dblclick(x, y, { delay: clickParams?.delay || 0 })
+          : this.page.mouse.click(x, y, { delay: clickParams?.delay || 0 })
       },
-      (moveParams?: mouseParams) => {
+      (moveParams?: MouseParams) => {
         if (moveParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
@@ -97,7 +108,7 @@ export class SceneFixture {
         }
         return this.page.mouse.move(x, y, { steps })
       },
-      (clickParams?: mouseParams) => {
+      (clickParams?: MouseParams) => {
         if (clickParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
@@ -114,7 +125,7 @@ export class SceneFixture {
     { steps }: { steps: number } = { steps: 20 }
   ): [DragToHandler, DragFromHandler] =>
     [
-      (dragToParams: mouseDragToParams) => {
+      (dragToParams: MouseDragToParams) => {
         if (dragToParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
@@ -131,7 +142,7 @@ export class SceneFixture {
           targetPosition: { x, y },
         })
       },
-      (dragFromParams: mouseDragFromParams) => {
+      (dragFromParams: MouseDragFromParams) => {
         if (dragFromParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
@@ -219,7 +230,7 @@ export class SceneFixture {
   }
 
   expectPixelColor = async (
-    colour: [number, number, number],
+    colour: [number, number, number] | [number, number, number][],
     coords: { x: number; y: number },
     diff: number
   ) => {
@@ -241,22 +252,36 @@ export class SceneFixture {
   }
 }
 
+function isColourArray(
+  colour: [number, number, number] | [number, number, number][]
+): colour is [number, number, number][] {
+  return isArray(colour[0])
+}
+
 export async function expectPixelColor(
   page: Page,
-  colour: [number, number, number],
+  colour: [number, number, number] | [number, number, number][],
   coords: { x: number; y: number },
   diff: number
 ) {
   let finalValue = colour
   await expect
-    .poll(async () => {
-      const pixel = (await getPixelRGBs(page)(coords, 1))[0]
-      if (!pixel) return null
-      finalValue = pixel
-      return pixel.every(
-        (channel, index) => Math.abs(channel - colour[index]) < diff
-      )
-    })
+    .poll(
+      async () => {
+        const pixel = (await getPixelRGBs(page)(coords, 1))[0]
+        if (!pixel) return null
+        finalValue = pixel
+        if (!isColourArray(colour)) {
+          return pixel.every(
+            (channel, index) => Math.abs(channel - colour[index]) < diff
+          )
+        }
+        return colour.some((c) =>
+          c.every((channel, index) => Math.abs(pixel[index] - channel) < diff)
+        )
+      },
+      { timeout: 10_000 }
+    )
     .toBeTruthy()
     .catch((cause) => {
       throw new Error(

e2e/playwright/fixtures/toolbarFixture.ts

@@ -23,7 +23,10 @@ export class ToolbarFixture {
   helixButton!: Locator
   startSketchBtn!: Locator
   lineBtn!: Locator
+  tangentialArcBtn!: Locator
+  circleBtn!: Locator
   rectangleBtn!: Locator
+  lengthConstraintBtn!: Locator
   exitSketchBtn!: Locator
   editSketchBtn!: Locator
   fileTreeBtn!: Locator
@@ -53,7 +56,10 @@ export class ToolbarFixture {
     this.helixButton = page.getByTestId('helix')
     this.startSketchBtn = page.getByTestId('sketch')
     this.lineBtn = page.getByTestId('line')
+    this.tangentialArcBtn = page.getByTestId('tangential-arc')
+    this.circleBtn = page.getByTestId('circle-center')
     this.rectangleBtn = page.getByTestId('corner-rectangle')
+    this.lengthConstraintBtn = page.getByTestId('constraint-length')
     this.exitSketchBtn = page.getByTestId('sketch-exit')
     this.editSketchBtn = page.getByText('Edit Sketch')
     this.fileTreeBtn = page.locator('[id="files-button-holder"]')
@@ -119,6 +125,25 @@ export class ToolbarFixture {
       await expect(this.exeIndicator).toBeVisible({ timeout: 15_000 })
     }
   }
+  selectCenterRectangle = async () => {
+    await this.page
+      .getByRole('button', { name: 'caret down Corner rectangle:' })
+      .click()
+    await expect(
+      this.page.getByTestId('dropdown-center-rectangle')
+    ).toBeVisible()
+    await this.page.getByTestId('dropdown-center-rectangle').click()
+  }
+
+  selectCircleThreePoint = async () => {
+    await this.page
+      .getByRole('button', { name: 'caret down Center circle:' })
+      .click()
+    await expect(
+      this.page.getByTestId('dropdown-circle-three-points')
+    ).toBeVisible()
+    await this.page.getByTestId('dropdown-circle-three-points').click()
+  }
 
   async closePane(paneId: SidebarType) {
     return closePane(this.page, paneId + SIDEBAR_BUTTON_SUFFIX)

e2e/playwright/point-click.spec.ts

@@ -219,18 +219,13 @@ test.describe('Point-and-click tests', { tag: ['@skipWin'] }, () => {
 
         afterChamferSelectSnippet:
           'sketch002 = startSketchOn(extrude001, seg03)',
-        afterRectangle1stClickSnippet: 'startProfileAt([205.96, 254.59], %)',
-        afterRectangle2ndClickSnippet: `angledLine([0, 11.39], %, $rectangleSegmentA002)
-    |> angledLine([
-         segAng(rectangleSegmentA002) - 90,
-         105.26
-       ], %, $rectangleSegmentB001)
-    |> angledLine([
-         segAng(rectangleSegmentA002),
-         -segLen(rectangleSegmentA002)
-       ], %, $rectangleSegmentC001)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()`,
+        afterRectangle1stClickSnippet:
+          'startProfileAt([205.96, 254.59], sketch002)',
+        afterRectangle2ndClickSnippet: `angledLine([0,11.39],%,$rectangleSegmentA002)
+        |>angledLine([segAng(rectangleSegmentA002)-90,105.26],%)
+        |>angledLine([segAng(rectangleSegmentA002),-segLen(rectangleSegmentA002)],%)
+        |>line(endAbsolute=[profileStartX(%),profileStartY(%)])
+        |>close()`,
       })
 
       await sketchOnAChamfer({
@@ -251,19 +246,15 @@ test.describe('Point-and-click tests', { tag: ['@skipWin'] }, () => {
 
         afterChamferSelectSnippet:
           'sketch003 = startSketchOn(extrude001, seg04)',
-        afterRectangle1stClickSnippet: 'startProfileAt([-209.64, 255.28], %)',
-        afterRectangle2ndClickSnippet: `angledLine([0, 11.56], %, $rectangleSegmentA003)
-    |> angledLine([
-         segAng(rectangleSegmentA003) - 90,
-         106.84
-       ], %, $rectangleSegmentB002)
-    |> angledLine([
-         segAng(rectangleSegmentA003),
-         -segLen(rectangleSegmentA003)
-       ], %, $rectangleSegmentC002)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()`,
+        afterRectangle1stClickSnippet:
+          'startProfileAt([-209.64, 255.28], sketch003)',
+        afterRectangle2ndClickSnippet: `angledLine([0,11.56],%,$rectangleSegmentA003)
+        |>angledLine([segAng(rectangleSegmentA003)-90,106.84],%)
+        |>angledLine([segAng(rectangleSegmentA003),-segLen(rectangleSegmentA003)],%)
+        |>line(endAbsolute=[profileStartX(%),profileStartY(%)])
+        |>close()`,
       })
+
       await sketchOnAChamfer({
         clickCoords: { x: 677, y: 87 },
         cameraPos: { x: -6200, y: 1500, z: 6200 },
@@ -276,19 +267,14 @@ test.describe('Point-and-click tests', { tag: ['@skipWin'] }, () => {
          ]
        }, %)`,
         afterChamferSelectSnippet:
-          'sketch003 = startSketchOn(extrude001, seg04)',
-        afterRectangle1stClickSnippet: 'startProfileAt([75.8, 317.2], %)',
-        afterRectangle2ndClickSnippet: `angledLine([0, 11.56], %, $rectangleSegmentA003)
-    |> angledLine([
-         segAng(rectangleSegmentA003) - 90,
-         106.84
-       ], %, $rectangleSegmentB002)
-    |> angledLine([
-         segAng(rectangleSegmentA003),
-         -segLen(rectangleSegmentA003)
-       ], %, $rectangleSegmentC002)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()`,
+          'sketch004 = startSketchOn(extrude001, seg05)',
+        afterRectangle1stClickSnippet:
+          'startProfileAt([82.57, 322.96], sketch004)',
+        afterRectangle2ndClickSnippet: `angledLine([0,11.16],%,$rectangleSegmentA004)
+        |>angledLine([segAng(rectangleSegmentA004)-90,103.07],%)
+        |>angledLine([segAng(rectangleSegmentA004),-segLen(rectangleSegmentA004)],%)
+        |>line(endAbsolute=[profileStartX(%),profileStartY(%)])
+        |>close()`,
       })
       /// last one
       await sketchOnAChamfer({
@@ -301,104 +287,98 @@ test.describe('Point-and-click tests', { tag: ['@skipWin'] }, () => {
        }, %)`,
         afterChamferSelectSnippet:
           'sketch005 = startSketchOn(extrude001, seg06)',
-        afterRectangle1stClickSnippet: 'startProfileAt([-23.43, 19.69], %)',
-        afterRectangle2ndClickSnippet: `angledLine([0, 9.1], %, $rectangleSegmentA005)
-
-    |> angledLine([
-         segAng(rectangleSegmentA005) - 90,
-         84.07
-       ], %, $rectangleSegmentB004)
-    |> angledLine([
-         segAng(rectangleSegmentA005),
-         -segLen(rectangleSegmentA005)
-       ], %, $rectangleSegmentC004)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()`,
+        afterRectangle1stClickSnippet:
+          'startProfileAt([-23.43, 19.69], sketch005)',
+        afterRectangle2ndClickSnippet: `angledLine([0,9.1],%,$rectangleSegmentA005)
+        |>angledLine([segAng(rectangleSegmentA005)-90,84.07],%)
+        |>angledLine([segAng(rectangleSegmentA005),-segLen(rectangleSegmentA005)],%)
+        |>line(endAbsolute=[profileStartX(%),profileStartY(%)])
+        |>close()`,
       })
 
       await test.step('verify at the end of the test that final code is what is expected', async () => {
         await editor.expectEditor.toContain(
           `sketch001 = startSketchOn('XZ')
+  |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
+  |> angledLine([0, 268.43], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       217.26
+     ], %, $seg01)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $yo)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
+  |> close()
+extrude001 = extrude(sketch001, length = 100)
+  |> chamfer({
+       length = 30,
+       tags = [getOppositeEdge(seg01)]
+     }, %, $seg03)
+  |> chamfer({ length = 30, tags = [seg01] }, %, $seg04)
+  |> chamfer({
+       length = 30,
+       tags = [getNextAdjacentEdge(seg02)]
+     }, %, $seg05)
+  |> chamfer({
+       length = 30,
+       tags = [getNextAdjacentEdge(yo)]
+     }, %, $seg06)
+sketch005 = startSketchOn(extrude001, seg06)
+profile004 = startProfileAt([-23.43, 19.69], sketch005)
+  |> angledLine([0, 9.1], %, $rectangleSegmentA005)
+  |> angledLine([
+       segAng(rectangleSegmentA005) - 90,
+       84.07
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA005),
+       -segLen(rectangleSegmentA005)
+     ], %)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+sketch004 = startSketchOn(extrude001, seg05)
+profile003 = startProfileAt([82.57, 322.96], sketch004)
+  |> angledLine([0, 11.16], %, $rectangleSegmentA004)
+  |> angledLine([
+       segAng(rectangleSegmentA004) - 90,
+       103.07
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA004),
+       -segLen(rectangleSegmentA004)
+     ], %)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+sketch003 = startSketchOn(extrude001, seg04)
+profile002 = startProfileAt([-209.64, 255.28], sketch003)
+  |> angledLine([0, 11.56], %, $rectangleSegmentA003)
+  |> angledLine([
+       segAng(rectangleSegmentA003) - 90,
+       106.84
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA003),
+       -segLen(rectangleSegmentA003)
+     ], %)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+sketch002 = startSketchOn(extrude001, seg03)
+profile001 = startProfileAt([205.96, 254.59], sketch002)
+  |> angledLine([0, 11.39], %, $rectangleSegmentA002)
+  |> angledLine([
+       segAng(rectangleSegmentA002) - 90,
+       105.26
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA002),
+       -segLen(rectangleSegmentA002)
+     ], %)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
 
-      |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
-      |> angledLine([0, 268.43], %, $rectangleSegmentA001)
-      |> angledLine([
-           segAng(rectangleSegmentA001) - 90,
-           217.26
-         ], %, $seg01)
-      |> angledLine([
-           segAng(rectangleSegmentA001),
-           -segLen(rectangleSegmentA001)
-         ], %, $yo)
-      |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
-      |> close()
-    extrude001 = extrude(sketch001, length = 100)
-      |> chamfer({
-           length = 30,
-           tags = [getOppositeEdge(seg01)]
-         }, %, $seg03)
-      |> chamfer({ length = 30, tags = [seg01] }, %, $seg04)
-      |> chamfer({
-           length = 30,
-           tags = [getNextAdjacentEdge(seg02)]
-         }, %, $seg05)
-      |> chamfer({
-           length = 30,
-           tags = [getNextAdjacentEdge(yo)]
-         }, %, $seg06)
-    sketch005 = startSketchOn(extrude001, seg06)
-      |> startProfileAt([-23.43,19.69], %)
-      |> angledLine([0, 9.1], %, $rectangleSegmentA005)
-      |> angledLine([
-           segAng(rectangleSegmentA005) - 90,
-           84.07
-         ], %, $rectangleSegmentB004)
-      |> angledLine([
-           segAng(rectangleSegmentA005),
-           -segLen(rectangleSegmentA005)
-         ], %, $rectangleSegmentC004)
-      |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-      |> close()
-    sketch004 = startSketchOn(extrude001, seg05)
-      |> startProfileAt([82.57,322.96], %)
-      |> angledLine([0, 11.16], %, $rectangleSegmentA004)
-      |> angledLine([
-           segAng(rectangleSegmentA004) - 90,
-           103.07
-         ], %, $rectangleSegmentB003)
-      |> angledLine([
-           segAng(rectangleSegmentA004),
-           -segLen(rectangleSegmentA004)
-         ], %, $rectangleSegmentC003)
-      |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-      |> close()
-    sketch003 = startSketchOn(extrude001, seg04)
-      |> startProfileAt([-209.64,255.28], %)
-      |> angledLine([0, 11.56], %, $rectangleSegmentA003)
-      |> angledLine([
-           segAng(rectangleSegmentA003) - 90,
-           106.84
-         ], %, $rectangleSegmentB002)
-      |> angledLine([
-           segAng(rectangleSegmentA003),
-           -segLen(rectangleSegmentA003)
-         ], %, $rectangleSegmentC002)
-      |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-      |> close()
-    sketch002 = startSketchOn(extrude001, seg03)
-      |> startProfileAt([205.96,254.59], %)
-      |> angledLine([0, 11.39], %, $rectangleSegmentA002)
-      |> angledLine([
-           segAng(rectangleSegmentA002) - 90,
-           105.26
-         ], %, $rectangleSegmentB001)
-      |> angledLine([
-           segAng(rectangleSegmentA002),
-           -segLen(rectangleSegmentA002)
-         ], %, $rectangleSegmentC001)
-      |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-      |> close()
-    `,
+`,
           { shouldNormalise: true }
         )
       })
@@ -443,18 +423,13 @@ test.describe('Point-and-click tests', { tag: ['@skipWin'] }, () => {
         beforeChamferSnippetEnd: '}, extrude001)',
         afterChamferSelectSnippet:
           'sketch002 = startSketchOn(extrude001, seg03)',
-        afterRectangle1stClickSnippet: 'startProfileAt([205.96, 254.59], %)',
-        afterRectangle2ndClickSnippet: `angledLine([0, 11.39], %, $rectangleSegmentA002)
-    |> angledLine([
-         segAng(rectangleSegmentA002) - 90,
-         105.26
-       ], %, $rectangleSegmentB001)
-    |> angledLine([
-         segAng(rectangleSegmentA002),
-         -segLen(rectangleSegmentA002)
-       ], %, $rectangleSegmentC001)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()`,
+        afterRectangle1stClickSnippet:
+          'startProfileAt([205.96, 254.59], sketch002)',
+        afterRectangle2ndClickSnippet: `angledLine([0,11.39],%,$rectangleSegmentA002)
+        |>angledLine([segAng(rectangleSegmentA002)-90,105.26],%)
+        |>angledLine([segAng(rectangleSegmentA002),-segLen(rectangleSegmentA002)],%)
+        |>line(endAbsolute=[profileStartX(%),profileStartY(%)])
+        |>close()`,
       })
       await editor.expectEditor.toContain(
         `sketch001 = startSketchOn('XZ')
@@ -484,17 +459,17 @@ chamf = chamfer({
        ]
      }, %)
 sketch002 = startSketchOn(extrude001, seg03)
-  |> startProfileAt([205.96, 254.59], %)
+profile001 = startProfileAt([205.96, 254.59], sketch002)
   |> angledLine([0, 11.39], %, $rectangleSegmentA002)
   |> angledLine([
        segAng(rectangleSegmentA002) - 90,
        105.26
-     ], %, $rectangleSegmentB001)
+     ], %)
   |> angledLine([
        segAng(rectangleSegmentA002),
        -segLen(rectangleSegmentA002)
-     ], %, $rectangleSegmentC001)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+     ], %)
+  |> line(endAbsolute=[profileStartX(%), profileStartY(%)])
   |> close()
 `,
         { shouldNormalise: true }
@@ -561,10 +536,10 @@ sketch002 = startSketchOn(extrude001, seg03)
 
     const expectedCodeSnippets = {
       sketchOnXzPlane: `sketch001 = startSketchOn('XZ')`,
-      pointAtOrigin: `startProfileAt([${originSloppy.kcl[0]}, ${originSloppy.kcl[1]}], %)`,
+      pointAtOrigin: `startProfileAt([${originSloppy.kcl[0]}, ${originSloppy.kcl[1]}], sketch001)`,
       segmentOnXAxis: `xLine(${xAxisSloppy.kcl[0]}, %)`,
-      afterSegmentDraggedOffYAxis: `startProfileAt([${offYAxis.kcl[0]}, ${offYAxis.kcl[1]}], %)`,
-      afterSegmentDraggedOnYAxis: `startProfileAt([${yAxisSloppy.kcl[0]}, ${yAxisSloppy.kcl[1]}], %)`,
+      afterSegmentDraggedOffYAxis: `startProfileAt([${offYAxis.kcl[0]}, ${offYAxis.kcl[1]}], sketch001)`,
+      afterSegmentDraggedOnYAxis: `startProfileAt([${yAxisSloppy.kcl[0]}, ${yAxisSloppy.kcl[1]}], sketch001)`,
     }
 
     await test.step(`Start a sketch on the XZ plane`, async () => {
@@ -605,6 +580,7 @@ sketch002 = startSketchOn(extrude001, seg03)
         expectedCodeSnippets.afterSegmentDraggedOnYAxis
       )
     })
+    await editor.page.waitForTimeout(1000)
   })
 
   test(`Verify user can double-click to edit a sketch`, async ({
@@ -1052,7 +1028,7 @@ openSketch = startSketchOn('XY')
     // One dumb hardcoded screen pixel value
     const testPoint = { x: 700, y: 150 }
     const [clickOnXzPlane] = scene.makeMouseHelpers(testPoint.x, testPoint.y)
-    const expectedOutput = `plane001 = offsetPlane('XZ', 5)`
+    const expectedOutput = `plane001 = offsetPlane('XZ', offset = 5)`
 
     await homePage.goToModelingScene()
     // FIXME: Since there is no KCL code loaded. We need to wait for the scene to load before we continue.
@@ -1117,13 +1093,14 @@ openSketch = startSketchOn('XY')
   }) => {
     // One dumb hardcoded screen pixel value
     const testPoint = { x: 620, y: 257 }
-    const expectedOutput = `helix001 = helix(revolutions = 1, angleStart = 360, counterClockWise = false, radius = 5, axis = 'X', length = 5)`
+    const expectedOutput = `helix001 = helix(  revolutions = 1,  angleStart = 360,  counterClockWise = false,  radius = 5,  axis = 'X',  length = 5,)`
+    const expectedLine = `revolutions=1,`
 
     await homePage.goToModelingScene()
 
-    await test.step(`Look for the red of the default plane`, async () => {
-      await scene.expectPixelColor([96, 52, 52], testPoint, 15)
-    })
+    // await test.step(`Look for the red of the default plane`, async () => {
+    //   await scene.expectPixelColor([96, 52, 52], testPoint, 15)
+    // })
     await test.step(`Go through the command bar flow`, async () => {
       await toolbar.helixButton.click()
       await cmdBar.expectState({
@@ -1154,7 +1131,7 @@ openSketch = startSketchOn('XY')
       await editor.expectEditor.toContain(expectedOutput)
       await editor.expectState({
         diagnostics: [],
-        activeLines: [expectedOutput],
+        activeLines: [expectedLine],
         highlightedCode: '',
       })
       // Red plane is now gone, white helix is there
@@ -1187,7 +1164,7 @@ openSketch = startSketchOn('XY')
     }) => {
       const initialCode = `sketch001 = startSketchOn('XZ')
     |> circle({ center = [0, 0], radius = 30 }, %)
-    plane001 = offsetPlane('XZ', 50)
+    plane001 = offsetPlane('XZ', offset = 50)
     sketch002 = startSketchOn(plane001)
     |> circle({ center = [0, 0], radius = 20 }, %)
 `
@@ -1273,7 +1250,7 @@ openSketch = startSketchOn('XY')
   }) => {
     const initialCode = `sketch001 = startSketchOn('XZ')
   |> circle({ center = [0, 0], radius = 30 }, %)
-  plane001 = offsetPlane('XZ', 50)
+  plane001 = offsetPlane('XZ', offset = 50)
   sketch002 = startSketchOn(plane001)
   |> circle({ center = [0, 0], radius = 20 }, %)
 loft001 = loft([sketch001, sketch002])
@@ -1320,7 +1297,7 @@ loft001 = loft([sketch001, sketch002])
       await page.waitForTimeout(1000)
       await clickOnSketch2()
       await expect(page.locator('.cm-activeLine')).toHaveText(`
-      plane001 = offsetPlane('XZ', 50)
+      plane001 = offsetPlane('XZ', offset = 50)
     `)
       await page.keyboard.press('Backspace')
       // Check for sketch 1
@@ -1396,12 +1373,12 @@ sketch002 = startSketchOn('XZ')
       await clickOnSketch2()
       await page.waitForTimeout(500)
       await cmdBar.progressCmdBar()
+      await toolbar.openPane('code')
       await page.waitForTimeout(500)
     })
 
     await test.step(`Confirm code is added to the editor, scene has changed`, async () => {
       await scene.expectPixelColor([135, 64, 73], testPoint, 15)
-      await toolbar.openPane('code')
       await editor.expectEditor.toContain(sweepDeclaration)
       await editor.expectState({
         diagnostics: [],
@@ -2471,19 +2448,18 @@ extrude002 = extrude(sketch002, length = 50)
       await context.addInitScript((initialCode) => {
         localStorage.setItem('persistCode', initialCode)
       }, initialCode)
-      await page.setBodyDimensions({ width: 1000, height: 500 })
+      await page.setBodyDimensions({ width: 1200, height: 500 })
       await homePage.goToModelingScene()
       await scene.waitForExecutionDone()
 
       // One dumb hardcoded screen pixel value
-      const testPoint = { x: 550, y: 295 }
+      const testPoint = { x: 580, y: 320 }
       const [clickOnCap] = scene.makeMouseHelpers(testPoint.x, testPoint.y)
       const shellTarget = hasExtrudesInPipe ? 'sketch002' : 'extrude002'
       const shellDeclaration = `shell001 = shell(${shellTarget}, faces = ['end'], thickness = 5)`
 
       await test.step(`Look for the grey of the shape`, async () => {
-        await toolbar.closePane('code')
-        await scene.expectPixelColor([128, 128, 128], testPoint, 15)
+        await scene.expectPixelColor([113, 113, 113], testPoint, 15)
       })
 
       await test.step(`Go through the command bar flow, selecting a cap and keeping default thickness`, async () => {

e2e/playwright/regression-tests.spec.ts

@@ -192,11 +192,11 @@ extrude001 = extrude(sketch001, length = 50)
   |> line(end = [0, -1])
   |> close()
   |> extrude(length = 1)
-  |> patternLinear3d({
-        axis: [1, 0, 1],
-        repetitions: 3,
-        distance: 6
-      }, %)`
+  |> patternLinear3d(
+        axis = [1, 0, 1],
+        repetitions = 3,
+        distance = 6,
+      )`
       )
     })
     await page.setBodyDimensions({ width: 1000, height: 500 })

e2e/playwright/snapshot-tests.spec.ts

@@ -444,8 +444,7 @@ test(
 
     const startXPx = 600
     await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-    code += `
-  |> startProfileAt([7.19, -9.7], %)`
+    code += `profile001 = startProfileAt([7.19, -9.7], sketch001)`
     await expect(page.locator('.cm-content')).toHaveText(code)
     await page.waitForTimeout(100)
 
@@ -456,7 +455,9 @@ test(
       mask: [page.getByTestId('model-state-indicator')],
     })
 
-    await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
+    const lineEndClick = () =>
+      page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
+    await lineEndClick()
     await page.waitForTimeout(100)
 
     code += `
@@ -467,6 +468,15 @@ test(
       .getByRole('button', { name: 'arc Tangential Arc', exact: true })
       .click()
 
+    // click on the end of the profile to continue it
+    await page.waitForTimeout(300)
+    await lineEndClick()
+    await page.waitForTimeout(100)
+
+    // click to continue profile
+    await page.mouse.move(813, 392, { steps: 10 })
+    await page.waitForTimeout(100)
+
     await page.mouse.move(startXPx + PUR * 30, 500 - PUR * 20, { steps: 10 })
 
     await page.waitForTimeout(1000)
@@ -589,8 +599,7 @@ test(
       mask: [page.getByTestId('model-state-indicator')],
     })
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn('XZ')
-  |> circle({ center = [14.44, -2.44], radius = 1 }, %)`
+      `sketch001 = startSketchOn('XZ')profile001 = circle({ center = [14.44, -2.44], radius = 1 }, sketch001)`
     )
   }
 )
@@ -634,8 +643,7 @@ test.describe(
 
       const startXPx = 600
       await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-      code += `
-  |> startProfileAt([7.19, -9.7], %)`
+      code += `profile001 = startProfileAt([7.19, -9.7], sketch001)`
       await expect(u.codeLocator).toHaveText(code)
       await page.waitForTimeout(100)
 
@@ -653,6 +661,10 @@ test.describe(
         .click()
       await page.waitForTimeout(100)
 
+      // click to continue profile
+      await page.mouse.click(813, 392)
+      await page.waitForTimeout(100)
+
       await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
 
       code += `
@@ -739,8 +751,7 @@ test.describe(
 
       const startXPx = 600
       await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-      code += `
-  |> startProfileAt([182.59, -246.32], %)`
+      code += `profile001 = startProfileAt([182.59, -246.32], sketch001)`
       await expect(u.codeLocator).toHaveText(code)
       await page.waitForTimeout(100)
 
@@ -758,6 +769,10 @@ test.describe(
         .click()
       await page.waitForTimeout(100)
 
+      // click to continue profile
+      await page.mouse.click(813, 392)
+      await page.waitForTimeout(100)
+
       await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
 
       code += `

e2e/playwright/test-network-and-connection-issues.spec.ts

@@ -1,6 +1,7 @@
 import { test, expect } from './zoo-test'
-
 import { commonPoints, getUtils } from './test-utils'
+import { EngineCommand } from 'lang/std/artifactGraph'
+import { uuidv4 } from 'lib/utils'
 
 test.describe('Test network and connection issues', () => {
   test(
@@ -111,18 +112,17 @@ test.describe('Test network and connection issues', () => {
 
       const startXPx = 600
       await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-      await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)`)
+      await expect(page.locator('.cm-content')).toHaveText(
+        `sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
+      )
       await page.waitForTimeout(100)
 
       await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
       await page.waitForTimeout(100)
 
       await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)
-  |> xLine(${commonPoints.num1}, %)`)
+        .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
+      |> xLine(${commonPoints.num1}, %)`)
 
       // Expect the network to be up
       await expect(networkToggle).toContainText('Connected')
@@ -169,7 +169,9 @@ test.describe('Test network and connection issues', () => {
       await page.mouse.click(100, 100)
 
       // select a line
-      await page.getByText(`startProfileAt(${commonPoints.startAt}, %)`).click()
+      await page
+        .getByText(`startProfileAt(${commonPoints.startAt}, sketch001)`)
+        .click()
 
       // enter sketch again
       await u.doAndWaitForCmd(
@@ -183,11 +185,36 @@ test.describe('Test network and connection issues', () => {
 
       await page.waitForTimeout(150)
 
+      const camCommand: EngineCommand = {
+        type: 'modeling_cmd_req',
+        cmd_id: uuidv4(),
+        cmd: {
+          type: 'default_camera_look_at',
+          center: { x: 109, y: 0, z: -152 },
+          vantage: { x: 115, y: -505, z: -152 },
+          up: { x: 0, y: 0, z: 1 },
+        },
+      }
+      const updateCamCommand: EngineCommand = {
+        type: 'modeling_cmd_req',
+        cmd_id: uuidv4(),
+        cmd: {
+          type: 'default_camera_get_settings',
+        },
+      }
+      await u.sendCustomCmd(camCommand)
+      await page.waitForTimeout(100)
+      await u.sendCustomCmd(updateCamCommand)
+      await page.waitForTimeout(100)
+
+      // click to continue profile
+      await page.mouse.click(1007, 400)
+      await page.waitForTimeout(100)
       // Ensure we can continue sketching
       await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
       await expect.poll(u.normalisedEditorCode)
         .toBe(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt([12.34, -12.34], %)
+profile001 = startProfileAt([12.34, -12.34], sketch001)
   |> xLine(12.34, %)
   |> line(end = [-12.34, 12.34])
 
@@ -197,7 +224,7 @@ test.describe('Test network and connection issues', () => {
 
       await expect.poll(u.normalisedEditorCode)
         .toBe(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt([12.34, -12.34], %)
+profile001 = startProfileAt([12.34, -12.34], sketch001)
   |> xLine(12.34, %)
   |> line(end = [-12.34, 12.34])
   |> xLine(-12.34, %)

e2e/playwright/testing-constraints.spec.ts

@@ -19,7 +19,7 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> xLine(-20, %)
-    `
+`
       )
     })
 
@@ -673,7 +673,7 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
       },
     ] as const
     for (const { testName, addVariable, value, constraint } of cases) {
-      test(`${testName}`, async ({ context, homePage, page }) => {
+      test(`${testName}`, async ({ context, homePage, page, editor }) => {
         // constants and locators
         const cmdBarKclInput = page
           .getByTestId('cmd-bar-arg-value')
@@ -706,7 +706,9 @@ part002 = startSketchOn('XZ')
         await page.setBodyDimensions({ width: 1200, height: 500 })
 
         await homePage.goToModelingScene()
+        await u.waitForPageLoad()
 
+        await editor.scrollToText('line(end = [74.36, 130.4])', true)
         await page.getByText('line(end = [74.36, 130.4])').click()
         await page.getByRole('button', { name: 'Edit Sketch' }).click()
 

e2e/playwright/testing-selections.spec.ts

@@ -66,33 +66,34 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     const startXPx = 600
     await u.closeDebugPanel()
     await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
-      |> startProfileAt(${commonPoints.startAt}, %)`)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
+    )
 
     await page.waitForTimeout(100)
     await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
 
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
-      |> startProfileAt(${commonPoints.startAt}, %)
-      |> xLine(${commonPoints.num1}, %)`)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
+    |> xLine(${commonPoints.num1}, %)`)
 
     await page.waitForTimeout(100)
     await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
-      |> startProfileAt(${commonPoints.startAt}, %)
-      |> xLine(${commonPoints.num1}, %)
-      |> yLine(${commonPoints.num1 + 0.01}, %)`)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+      commonPoints.startAt
+    }, sketch001)
+    |> xLine(${commonPoints.num1}, %)
+    |> yLine(${commonPoints.num1 + 0.01}, %)`)
     await page.waitForTimeout(100)
     await page.mouse.click(startXPx, 500 - PUR * 20)
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
-      |> startProfileAt(${commonPoints.startAt}, %)
-      |> xLine(${commonPoints.num1}, %)
-      |> yLine(${commonPoints.num1 + 0.01}, %)
-      |> xLine(${commonPoints.num2 * -1}, %)`)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+      commonPoints.startAt
+    }, sketch001)
+    |> xLine(${commonPoints.num1}, %)
+    |> yLine(${commonPoints.num1 + 0.01}, %)
+    |> xLine(${commonPoints.num2 * -1}, %)`)
 
     // deselect line tool
     await page.getByRole('button', { name: 'line Line', exact: true }).click()
@@ -259,66 +260,88 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
       localStorage.setItem(
         'persistCode',
         `sketch001 = startSketchOn('XZ')
-      |> startProfileAt([-79.26, 95.04], %)
-      |> line(end = [112.54, 127.64], tag = $seg02)
-      |> line(end = [170.36, -121.61], tag = $seg01)
-      |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-      |> close()
-  extrude001 = extrude(sketch001, length = 50)
-  sketch005 = startSketchOn(extrude001, 'END')
-    |> startProfileAt([23.24, 136.52], %)
-    |> line(end = [-8.44, 36.61])
-    |> line(end = [49.4, 2.05])
-    |> line(end = [29.69, -46.95])
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-  sketch003 = startSketchOn(extrude001, seg01)
-    |> startProfileAt([21.23, 17.81], %)
-    |> line(end = [51.97, 21.32])
-    |> line(end = [4.07, -22.75])
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-  sketch002 = startSketchOn(extrude001, seg02)
-    |> startProfileAt([-100.54, 16.99], %)
-    |> line(end = [0, 20.03])
-    |> line(end = [62.61, 0], tag = $seg03)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-  extrude002 = extrude(sketch002, length = 50)
-  sketch004 = startSketchOn(extrude002, seg03)
-    |> startProfileAt([57.07, 134.77], %)
-    |> line(end = [-4.72, 22.84])
-    |> line(end = [28.8, 6.71])
-    |> line(end = [9.19, -25.33])
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-  extrude003 = extrude(sketch004, length = 20)
-  pipeLength = 40
-  pipeSmallDia = 10
-  pipeLargeDia = 20
-  thickness = 0.5
-  part009 = startSketchOn('XY')
-    |> startProfileAt([pipeLargeDia - (thickness / 2), 38], %)
-    |> line(end = [thickness, 0])
-    |> line(end = [0, -1])
-    |> angledLineToX({
-     angle = 60,
-     to = pipeSmallDia + thickness
-   }, %)
-    |> line(end = [0, -pipeLength])
-    |> angledLineToX({
-     angle = -60,
-     to = pipeLargeDia + thickness
-   }, %)
-    |> line(end = [0, -1])
-    |> line(end = [-thickness, 0])
-    |> line(end = [0, 1])
-    |> angledLineToX({ angle = 120, to = pipeSmallDia }, %)
-    |> line(end = [0, pipeLength])
-    |> angledLineToX({ angle = 60, to = pipeLargeDia }, %)
-    |> close()
-  rev = revolve({ axis: 'y' }, part009)
-  `
+  |> startProfileAt([-79.26, 95.04], %)
+  |> line(end = [112.54, 127.64], tag = $seg02)
+  |> line(end = [170.36, -121.61], tag = $seg01)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+extrude001 = extrude(sketch001, length = 50)
+sketch005 = startSketchOn(extrude001, 'END')
+  |> startProfileAt([23.24, 136.52], %)
+  |> line(end = [-8.44, 36.61])
+  |> line(end = [49.4, 2.05])
+  |> line(end = [29.69, -46.95])
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+sketch003 = startSketchOn(extrude001, seg01)
+  |> startProfileAt([21.23, 17.81], %)
+  |> line(end = [51.97, 21.32])
+  |> line(end = [4.07, -22.75])
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+sketch002 = startSketchOn(extrude001, seg02)
+  |> startProfileAt([-100.54, 16.99], %)
+  |> line(end = [0, 20.03])
+  |> line(end = [62.61, 0], tag = $seg03)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+extrude002 = extrude(sketch002, length = 50)
+sketch004 = startSketchOn(extrude002, seg03)
+  |> startProfileAt([57.07, 134.77], %)
+  |> line(end = [-4.72, 22.84])
+  |> line(end = [28.8, 6.71])
+  |> line(end = [9.19, -25.33])
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+extrude003 = extrude(sketch004, length = 20)
+pipeLength = 40
+pipeSmallDia = 10
+pipeLargeDia = 20
+thickness = 0.5
+part009 = startSketchOn('XY')
+  |> startProfileAt([pipeLargeDia - (thickness / 2), 38], %)
+  |> line(end = [thickness, 0])
+  |> line(end = [0, -1])
+  |> angledLineToX({
+       angle = 60,
+       to = pipeSmallDia + thickness
+     }, %)
+  |> line(end = [0, -pipeLength])
+  |> angledLineToX({
+       angle = -60,
+       to = pipeLargeDia + thickness
+     }, %)
+  |> line(end = [0, -1])
+  |> line(end = [-thickness, 0])
+  |> line(end = [0, 1])
+  |> angledLineToX({ angle = 120, to = pipeSmallDia }, %)
+  |> line(end = [0, pipeLength])
+  |> angledLineToX({ angle = 60, to = pipeLargeDia }, %)
+  |> close()
+rev = revolve({ axis = 'y' }, part009)
+sketch006 = startSketchOn('XY')
+profile001 = circle({
+  center = [42.91, -70.42],
+  radius = 17.96
+}, sketch006)
+profile002 = startProfileAt([86.92, -63.81], sketch006)
+  |> angledLine([0, 63.81], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       17.05
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+profile003 = startProfileAt([40.16, -120.48], sketch006)
+  |> line(end = [26.95, 24.21])
+  |> line(end = [20.91, -28.61])
+  |> line(end = [32.46, 18.71])
+
+`
       )
     }, KCL_DEFAULT_LENGTH)
     await page.setBodyDimensions({ width: 1000, height: 500 })
@@ -347,9 +370,10 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     })
     await page.waitForTimeout(100)
 
-    const revolve = { x: 646, y: 248 }
+    const revolve = { x: 635, y: 253 }
     const parentExtrude = { x: 915, y: 133 }
     const solid2d = { x: 770, y: 167 }
+    const individualProfile = { x: 694, y: 432 }
 
     // DELETE REVOLVE
     await page.mouse.click(revolve.x, revolve.y)
@@ -366,43 +390,47 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
       `rev = revolve({ axis: 'y' }, part009)`
     )
 
-    // DELETE PARENT EXTRUDE
-    await page.mouse.click(parentExtrude.x, parentExtrude.y)
-    await page.waitForTimeout(100)
-    await expect(page.locator('.cm-activeLine')).toHaveText(
-      '|> line(end = [170.36, -121.61], tag = $seg01)'
-    )
-    await u.clearCommandLogs()
-    await page.keyboard.press('Backspace')
-    await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
-    await page.waitForTimeout(200)
-    await expect(u.codeLocator).not.toContainText(
-      `extrude001 = extrude(sketch001, length = 50)`
-    )
-    await expect(u.codeLocator).toContainText(`sketch005 = startSketchOn({
-     plane = {
-       origin = { x = 0, y = -50, z = 0 },
-       xAxis = { x = 1, y = 0, z = 0 },
-       yAxis = { x = 0, y = 0, z = 1 },
-       zAxis = { x = 0, y = -1, z = 0 }
-     }
-   })`)
-    await expect(u.codeLocator).toContainText(`sketch003 = startSketchOn({
-     plane = {
-       origin = { x = 116.53, y = 0, z = 163.25 },
-       xAxis = { x = -0.81, y = 0, z = 0.58 },
-       yAxis = { x = 0, y = -1, z = 0 },
-       zAxis = { x = 0.58, y = 0, z = 0.81 }
-     }
-   })`)
-    await expect(u.codeLocator).toContainText(`sketch002 = startSketchOn({
-     plane = {
-       origin = { x = -91.74, y = 0, z = 80.89 },
-       xAxis = { x = -0.66, y = 0, z = -0.75 },
-       yAxis = { x = 0, y = -1, z = 0 },
-       zAxis = { x = -0.75, y = 0, z = 0.66 }
-     }
-   })`)
+    // FIXME (commented section below), this test would select a wall that had a sketch on it, and delete the underlying extrude
+    // and replace the sketch on face with a hard coded custom plane, but since there was a sketch on that plane maybe it
+    // should have delete the sketch? it's broken atm, but not sure if worth fixing since desired behaviour is a little
+    // vague
+    //   // DELETE PARENT EXTRUDE
+    //   await page.mouse.click(parentExtrude.x, parentExtrude.y)
+    //   await page.waitForTimeout(100)
+    //   await expect(page.locator('.cm-activeLine')).toHaveText(
+    //     '|> line(end = [170.36, -121.61], tag = $seg01)'
+    //   )
+    //   await u.clearCommandLogs()
+    //   await page.keyboard.press('Backspace')
+    //   await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
+    //   await page.waitForTimeout(200)
+    //   await expect(u.codeLocator).not.toContainText(
+    //     `extrude001 = extrude(sketch001, length = 50)`
+    //   )
+    //   await expect(u.codeLocator).toContainText(`sketch005 = startSketchOn({
+    //    plane = {
+    //      origin = { x = 0, y = -50, z = 0 },
+    //      xAxis = { x = 1, y = 0, z = 0 },
+    //      yAxis = { x = 0, y = 0, z = 1 },
+    //      zAxis = { x = 0, y = -1, z = 0 }
+    //    }
+    //  })`)
+    //   await expect(u.codeLocator).toContainText(`sketch003 = startSketchOn({
+    //    plane = {
+    //      origin = { x = 116.53, y = 0, z = 163.25 },
+    //      xAxis = { x = -0.81, y = 0, z = 0.58 },
+    //      yAxis = { x = 0, y = -1, z = 0 },
+    //      zAxis = { x = 0.58, y = 0, z = 0.81 }
+    //    }
+    //  })`)
+    //   await expect(u.codeLocator).toContainText(`sketch002 = startSketchOn({
+    //    plane = {
+    //      origin = { x = -91.74, y = 0, z = 80.89 },
+    //      xAxis = { x = -0.66, y = 0, z = -0.75 },
+    //      yAxis = { x = 0, y = -1, z = 0 },
+    //      zAxis = { x = -0.75, y = 0, z = 0.66 }
+    //    }
+    //  })`)
 
     // DELETE SOLID 2D
     await page.mouse.click(solid2d.x, solid2d.y)
@@ -415,16 +443,29 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
     await page.waitForTimeout(200)
     await expect(u.codeLocator).not.toContainText(`sketch005 = startSketchOn({`)
+
+    // Delete a single profile
+    await page.mouse.click(individualProfile.x, individualProfile.y)
+    await page.waitForTimeout(100)
+    const codeToBeDeletedSnippet =
+      'profile003 = startProfileAt([40.16, -120.48], sketch006)'
+    await expect(page.locator('.cm-activeLine')).toHaveText(
+      '  |> line(end = [20.91, -28.61])'
+    )
+    await u.clearCommandLogs()
+    await page.keyboard.press('Backspace')
+    await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
+    await page.waitForTimeout(200)
+    await expect(u.codeLocator).not.toContainText(codeToBeDeletedSnippet)
   })
-  test("Deleting solid that the AST mod can't handle results in a toast message", async ({
-    page,
-    homePage,
-  }) => {
-    const u = await getUtils(page)
-    await page.addInitScript(async () => {
-      localStorage.setItem(
-        'persistCode',
-        `sketch001 = startSketchOn('XZ')
+  test.fixme(
+    "Deleting solid that the AST mod can't handle results in a toast message",
+    async ({ page, homePage }) => {
+      const u = await getUtils(page)
+      await page.addInitScript(async () => {
+        localStorage.setItem(
+          'persistCode',
+          `sketch001 = startSketchOn('XZ')
     |> startProfileAt([-79.26, 95.04], %)
     |> line(end = [112.54, 127.64], tag = $seg02)
     |> line(end = [170.36, -121.61], tag = $seg01)
@@ -439,48 +480,49 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
   `
+        )
+      }, KCL_DEFAULT_LENGTH)
+      await page.setBodyDimensions({ width: 1000, height: 500 })
+
+      await homePage.goToModelingScene()
+
+      await u.openDebugPanel()
+      await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
+      await u.closeDebugPanel()
+
+      await u.openAndClearDebugPanel()
+      await u.sendCustomCmd({
+        type: 'modeling_cmd_req',
+        cmd_id: uuidv4(),
+        cmd: {
+          type: 'default_camera_look_at',
+          vantage: { x: 1139.49, y: -7053, z: 8597.31 },
+          center: { x: -2206.68, y: -1298.36, z: 60 },
+          up: { x: 0, y: 0, z: 1 },
+        },
+      })
+      await page.waitForTimeout(100)
+      await u.sendCustomCmd({
+        type: 'modeling_cmd_req',
+        cmd_id: uuidv4(),
+        cmd: {
+          type: 'default_camera_get_settings',
+        },
+      })
+      await page.waitForTimeout(100)
+
+      // attempt delete
+      await page.mouse.click(930, 139)
+      await page.waitForTimeout(100)
+      await expect(page.locator('.cm-activeLine')).toHaveText(
+        '|> line(end = [170.36, -121.61], tag = $seg01)'
       )
-    }, KCL_DEFAULT_LENGTH)
-    await page.setBodyDimensions({ width: 1000, height: 500 })
+      await u.clearCommandLogs()
+      await page.keyboard.press('Backspace')
 
-    await homePage.goToModelingScene()
-
-    await u.openDebugPanel()
-    await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
-    await u.closeDebugPanel()
-
-    await u.openAndClearDebugPanel()
-    await u.sendCustomCmd({
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: {
-        type: 'default_camera_look_at',
-        vantage: { x: 1139.49, y: -7053, z: 8597.31 },
-        center: { x: -2206.68, y: -1298.36, z: 60 },
-        up: { x: 0, y: 0, z: 1 },
-      },
-    })
-    await page.waitForTimeout(100)
-    await u.sendCustomCmd({
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: {
-        type: 'default_camera_get_settings',
-      },
-    })
-    await page.waitForTimeout(100)
-
-    // attempt delete
-    await page.mouse.click(930, 139)
-    await page.waitForTimeout(100)
-    await expect(page.locator('.cm-activeLine')).toHaveText(
-      '|> line(end = [170.36, -121.61], tag = $seg01)'
-    )
-    await u.clearCommandLogs()
-    await page.keyboard.press('Backspace')
-
-    await expect(page.getByText('Unable to delete selection')).toBeVisible()
-  })
+      await expect(page.getByText('Unable to delete selection')).toBeVisible()
+    }
+  )
   test('Hovering over 3d features highlights code, clicking puts the cursor in the right place and sends selection id to engine', async ({
     page,
     homePage,
@@ -1216,12 +1258,15 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
 
     await page.waitForTimeout(600)
 
+    const firstClickCoords = { x: 650, y: 200 } as const
     // Place a point because the line tool will exit if no points are pressed
-    await page.mouse.click(650, 200)
+    await page.mouse.click(firstClickCoords.x, firstClickCoords.y)
     await page.waitForTimeout(600)
 
     // Code before exiting the tool
-    let previousCodeContent = await page.locator('.cm-content').innerText()
+    let previousCodeContent = (
+      await page.locator('.cm-content').innerText()
+    ).replace(/\s+/g, '')
 
     // deselect the line tool by clicking it
     await page.getByRole('button', { name: 'line Line', exact: true }).click()
@@ -1233,14 +1278,23 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     await page.mouse.click(750, 200)
     await page.waitForTimeout(100)
 
-    // expect no change
-    await expect(page.locator('.cm-content')).toHaveText(previousCodeContent)
+    await expect
+      .poll(async () => {
+        let str = await page.locator('.cm-content').innerText()
+        str = str.replace(/\s+/g, '')
+        return str
+      })
+      .toBe(previousCodeContent)
 
     // select line tool again
     await page.getByRole('button', { name: 'line Line', exact: true }).click()
 
     await u.closeDebugPanel()
 
+    // Click to continue profile
+    await page.mouse.click(firstClickCoords.x, firstClickCoords.y)
+    await page.waitForTimeout(100)
+
     // line tool should work as expected again
     await page.mouse.click(700, 200)
     await expect(page.locator('.cm-content')).not.toHaveText(

e2e/playwright/various.spec.ts

@@ -209,8 +209,13 @@ test('First escape in tool pops you out of tool, second exits sketch mode', asyn
   // Draw a line
   await page.mouse.move(700, 200, { steps: 5 })
   await page.mouse.click(700, 200)
-  await page.mouse.move(800, 250, { steps: 5 })
-  await page.mouse.click(800, 250)
+
+  const secondMousePosition = { x: 800, y: 250 }
+
+  await page.mouse.move(secondMousePosition.x, secondMousePosition.y, {
+    steps: 5,
+  })
+  await page.mouse.click(secondMousePosition.x, secondMousePosition.y)
   // Unequip line tool
   await page.keyboard.press('Escape')
   // Make sure we didn't pop out of sketch mode.
@@ -219,11 +224,23 @@ test('First escape in tool pops you out of tool, second exits sketch mode', asyn
   // Equip arc tool
   await page.keyboard.press('a')
   await expect(arcButton).toHaveAttribute('aria-pressed', 'true')
+
+  // click in the same position again to continue the profile
+  await page.mouse.move(secondMousePosition.x, secondMousePosition.y, {
+    steps: 5,
+  })
+  await page.mouse.click(secondMousePosition.x, secondMousePosition.y)
+
   await page.mouse.move(1000, 100, { steps: 5 })
   await page.mouse.click(1000, 100)
   await page.keyboard.press('Escape')
-  await page.keyboard.press('l')
-  await expect(lineButton).toHaveAttribute('aria-pressed', 'true')
+  await expect(arcButton).toHaveAttribute('aria-pressed', 'false')
+  await expect
+    .poll(async () => {
+      await page.keyboard.press('l')
+      return lineButton.getAttribute('aria-pressed')
+    })
+    .toBe('true')
 
   // Do not close the sketch.
   // On close it will exit sketch mode.
@@ -519,9 +536,9 @@ extrude001 = extrude(sketch001, length = 5 + 7)`
 
   await expect.poll(u.normalisedEditorCode).toContain(
     u.normalisedCode(`sketch002 = startSketchOn(extrude001, seg01)
-  |> startProfileAt([-12.94, 6.6], %)
-  |> line(end = [2.45, -0.2])
-  |> line(end = [-2.6, -1.25])
+profile001 = startProfileAt([-12.34, 12.34], sketch002)
+  |> line(end = [12.34, -12.34])
+  |> line(end = [-12.34, -12.34])
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 `)
@@ -537,9 +554,8 @@ extrude001 = extrude(sketch001, length = 5 + 7)`
   await page.getByText('startProfileAt([-12').click()
   await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
   await page.getByRole('button', { name: 'Edit Sketch' }).click()
-  await page.waitForTimeout(400)
-  await page.waitForTimeout(150)
-  await page.setBodyDimensions({ width: 1200, height: 1200 })
+  await page.waitForTimeout(500)
+  await page.setViewportSize({ width: 1200, height: 1200 })
   await u.openAndClearDebugPanel()
   await u.updateCamPosition([452, -152, 1166])
   await u.closeDebugPanel()

electron-builder.yml

@@ -16,8 +16,7 @@ mac:
       arch:
         - x64
         - arm64
-  notarize:
-    teamId: 92H8YB3B95
+  notarize: true
   fileAssociations:
     - ext: kcl
       name: kcl
@@ -32,10 +31,11 @@ win:
       arch:
         - x64
         - arm64
-  signingHashAlgorithms:
-    - sha256
-  sign: "./scripts/sign-win.js"
-  publisherName: "KittyCAD Inc" # needs to be exactly like on Digicert
+  signtoolOptions:
+    sign: "./scripts/sign-win.js"
+    signingHashAlgorithms:
+      - sha256
+    publisherName: "KittyCAD Inc" # needs to be exactly like on Digicert
   icon: "assets/icon.ico"
   fileAssociations:
     - ext: kcl