Cut release v0.9.2 (#714)

Bumps [tungstenite](https://github.com/snapview/tungstenite-rs) from 0.20.0 to 0.20.1.
- [Changelog](https://github.com/snapview/tungstenite-rs/blob/master/CHANGELOG.md)
- [Commits](https://github.com/snapview/tungstenite-rs/compare/v0.20.0...v0.20.1)

---
updated-dependencies:
- dependency-name: tungstenite
  dependency-type: indirect
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

.env.development

@@ -1,6 +1,6 @@
-VITE_KC_API_WS_MODELING_URL=wss://api.kittycad.io/ws/modeling/commands
-VITE_KC_API_BASE_URL=https://api.kittycad.io
-VITE_KC_SITE_BASE_URL=https://kittycad.io
+VITE_KC_API_WS_MODELING_URL=wss://api.dev.kittycad.io/ws/modeling/commands
+VITE_KC_API_BASE_URL=https://api.dev.kittycad.io
+VITE_KC_SITE_BASE_URL=https://dev.kittycad.io
 VITE_KC_SKIP_AUTH=false
-VITE_KC_CONNECTION_TIMEOUT_MS=15000
+VITE_KC_CONNECTION_TIMEOUT_MS=5000
 VITE_KC_SENTRY_DSN=

.github/workflows/cargo-build.yml

@@ -24,7 +24,7 @@ jobs:
       matrix:
         dir: ['src/wasm-lib']
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
 
       - name: Install latest rust
         uses: actions-rs/toolchain@v1

.github/workflows/cargo-clippy.yml

@@ -24,7 +24,7 @@ jobs:
       matrix:
         dir: ['src/wasm-lib']
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Install latest rust
         uses: actions-rs/toolchain@v1
         with:
@@ -54,4 +54,4 @@ jobs:
       - name: Run clippy
         run: |
           cd "${{ matrix.dir }}"
-          cargo clippy --all --tests -- -D warnings
+          cargo clippy --all --tests --benches -- -D warnings

.github/workflows/cargo-criterion.yml

@@ -0,0 +1,37 @@
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '**.rs'
+      - '**/Cargo.toml'
+      - '**/Cargo.lock'
+      - '**/rust-toolchain.toml'
+      - .github/workflows/cargo-criterion.yml
+  pull_request:
+    paths:
+      - '**.rs'
+      - '**/Cargo.toml'
+      - '**/Cargo.lock'
+      - '**/rust-toolchain.toml'
+      - .github/workflows/cargo-criterion.yml
+  workflow_dispatch:
+permissions: read-all
+name: cargo criterion
+jobs:
+  cargocriterion:
+    name: cargo criterion
+    runs-on: ubuntu-latest-8-cores
+    steps:
+      - uses: actions/checkout@v4
+      - uses: dtolnay/rust-toolchain@stable
+      - name: Install dependencies
+        run: |
+          cargo install cargo-criterion
+      - name: Rust Cache
+        uses: Swatinem/rust-cache@v2.6.1
+      - name: Benchmark kcl library
+        shell: bash
+        run: |-
+          cd src/wasm-lib/kcl; cargo criterion
+

.github/workflows/cargo-fmt.yml

@@ -27,7 +27,7 @@ jobs:
       matrix:
         dir: ['src/wasm-lib', 'src-tauri']
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Install latest rust
         uses: actions-rs/toolchain@v1
         with:

.github/workflows/cargo-test.yml

@@ -26,7 +26,7 @@ jobs:
       matrix:
         dir: ['src/wasm-lib']
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Install latest rust
         uses: actions-rs/toolchain@v1
         with:
@@ -55,7 +55,8 @@ jobs:
         shell: bash
         run: |-
           cd "${{ matrix.dir }}"
-          cargo test --all
+          cargo nextest run --workspace --no-fail-fast -P ci
         env:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN}}
+          RUST_MIN_STACK: 10485760000
 

.github/workflows/ci.yml

@@ -4,16 +4,15 @@ on:
   pull_request:
   push:
     branches:
-        - main
+      - main
   release:
     types: [published]
 
 jobs:
-
   check-format:
     runs-on: 'ubuntu-20.04'
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: actions/setup-node@v3
         with:
           node-version-file: '.nvmrc'
@@ -25,7 +24,7 @@ jobs:
     runs-on: ubuntu-20.04
 
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: actions/setup-node@v3
         with:
           node-version-file: '.nvmrc'
@@ -33,19 +32,17 @@ jobs:
       - run: yarn install
       - uses: Swatinem/rust-cache@v2
         with:
-          workspaces: "./src/wasm-lib"
+          workspaces: './src/wasm-lib'
 
       - run: yarn build:wasm
       - run: yarn tsc
 
-
   build-test-web:
     runs-on: ubuntu-20.04
     outputs:
       version: ${{ steps.export_version.outputs.version }}
     steps:
-
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
 
       - uses: actions/setup-node@v3
         with:
@@ -56,7 +53,7 @@ jobs:
 
       - uses: Swatinem/rust-cache@v2
         with:
-          workspaces: "./src/wasm-lib"
+          workspaces: './src/wasm-lib'
 
       - run: yarn build:wasm
 
@@ -69,7 +66,6 @@ jobs:
       - id: export_version
         run: echo "version=`cat package.json | jq -r '.version'`" >> "$GITHUB_OUTPUT"
 
-
   build-apps:
     needs: [check-format, build-test-web, check-types]
     runs-on: ${{ matrix.os }}
@@ -77,8 +73,7 @@ jobs:
       matrix:
         os: [macos-latest, ubuntu-20.04, windows-latest]
     steps:
-
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
 
       - name: install ubuntu system dependencies
         if: matrix.os == 'ubuntu-20.04'
@@ -104,7 +99,7 @@ jobs:
 
       - uses: Swatinem/rust-cache@v2
         with:
-          workspaces: "./src/wasm-lib"
+          workspaces: './src/wasm-lib'
 
       - name: wasm prep
         shell: bash
@@ -114,18 +109,6 @@ jobs:
           cd ../../
           cp src/wasm-lib/pkg/wasm_lib_bg.wasm public
 
-      - name: macos sed
-        if: matrix.os == 'macos-latest'
-        shell: bash
-        run: |
-          sed -i '' 's/import.meta.url//g' "./src/wasm-lib/pkg/wasm_lib.js"
-
-      - name: ubuntu and windows sed
-        if: matrix.os != 'macos-latest'
-        shell: bash
-        run: |
-          sed -i 's/import.meta.url//g' "./src/wasm-lib/pkg/wasm_lib.js"
-
       - name: Fix format
         run: yarn fmt
 
@@ -134,11 +117,42 @@ jobs:
         run: |
           rustup target add aarch64-apple-darwin
 
-      - name: Build the app for the current platform (no upload)
+      - name: Prepare Windows certificate and variables
+        if: matrix.os == 'windows-latest'
+        run: |
+          echo "${{secrets.SM_CLIENT_CERT_FILE_B64 }}" | base64 --decode > /d/Certificate_pkcs12.p12
+          cat /d/Certificate_pkcs12.p12
+          echo "::set-output name=version::${GITHUB_REF#refs/tags/v}"
+          echo "SM_HOST=${{ secrets.SM_HOST }}" >> "$GITHUB_ENV"
+          echo "SM_API_KEY=${{ secrets.SM_API_KEY }}" >> "$GITHUB_ENV"
+          echo "SM_CLIENT_CERT_FILE=D:\\Certificate_pkcs12.p12" >> "$GITHUB_ENV"
+          echo "SM_CLIENT_CERT_PASSWORD=${{ secrets.SM_CLIENT_CERT_PASSWORD }}" >> "$GITHUB_ENV"
+          echo "C:\Program Files (x86)\Windows Kits\10\App Certification Kit" >> $GITHUB_PATH
+          echo "C:\Program Files (x86)\Microsoft SDKs\Windows\v10.0A\bin\NETFX 4.8 Tools" >> $GITHUB_PATH
+          echo "C:\Program Files\DigiCert\DigiCert One Signing Manager Tools" >> $GITHUB_PATH
+        shell: bash
+
+      - name: Setup Windows certicate with SSM KSP
+        if: matrix.os == 'windows-latest'
+        run: |
+          curl -X GET  https://one.digicert.com/signingmanager/api-ui/v1/releases/smtools-windows-x64.msi/download -H "x-api-key:%SM_API_KEY%" -o smtools-windows-x64.msi
+          msiexec /i smtools-windows-x64.msi /quiet /qn
+          smksp_registrar.exe list
+          smctl.exe keypair ls
+          C:\Windows\System32\certutil.exe -csp "DigiCert Signing Manager KSP" -key -user
+          smksp_cert_sync.exe
+        shell: cmd
+
+      - name: Build and sign the app for the current platform
         uses: tauri-apps/tauri-action@v0
         env:
           TAURI_PRIVATE_KEY: ${{ secrets.TAURI_PRIVATE_KEY }}
           TAURI_KEY_PASSWORD: ${{ secrets.TAURI_KEY_PASSWORD }}
+          APPLE_CERTIFICATE: ${{ secrets.APPLE_CERTIFICATE }}
+          APPLE_CERTIFICATE_PASSWORD: ${{ secrets.APPLE_CERTIFICATE_PASSWORD }}
+          APPLE_SIGNING_IDENTITY: ${{ secrets.APPLE_SIGNING_IDENTITY }}
+          APPLE_ID: ${{ secrets.APPLE_ID }}
+          APPLE_PASSWORD: ${{ secrets.APPLE_PASSWORD }}
         with:
           args: ${{ matrix.os == 'macos-latest' && '--target universal-apple-darwin' || '' }}
 
@@ -146,68 +160,15 @@ jobs:
         with:
           path: ${{ matrix.os == 'macos-latest' && 'src-tauri/target/universal-apple-darwin/release/bundle/*/*' || 'src-tauri/target/release/bundle/*/*' }}
 
-
-  sign-windows-msi:
-    runs-on: windows-latest
-    if: github.event_name == 'release'
-    needs: [build-test-web, build-apps]
-    env:
-      VERSION_NO_V: ${{ needs.build-test-web.outputs.version }}
-    steps:
-
-      - uses: actions/download-artifact@v3
-
-      - name: Setup Certificate 
-        run: | 
-          echo "${{secrets.SM_CLIENT_CERT_FILE_B64 }}" | base64 --decode > /d/Certificate_pkcs12.p12 
-          cat /d/Certificate_pkcs12.p12 
-        shell: bash 
-
-      - name: Set variables 
-        id: variables 
-        run: | 
-          echo "::set-output name=version::${GITHUB_REF#refs/tags/v}" 
-          echo "SM_HOST=${{ secrets.SM_HOST }}" >> "$GITHUB_ENV" 
-          echo "SM_API_KEY=${{ secrets.SM_API_KEY }}" >> "$GITHUB_ENV" 
-          echo "SM_CLIENT_CERT_FILE=D:\\Certificate_pkcs12.p12" >> "$GITHUB_ENV" 
-          echo "SM_CLIENT_CERT_PASSWORD=${{ secrets.SM_CLIENT_CERT_PASSWORD }}" >> "$GITHUB_ENV" 
-          echo "C:\Program Files (x86)\Windows Kits\10\App Certification Kit" >> $GITHUB_PATH 
-          echo "C:\Program Files (x86)\Microsoft SDKs\Windows\v10.0A\bin\NETFX 4.8 Tools" >> $GITHUB_PATH 
-          echo "C:\Program Files\DigiCert\DigiCert One Signing Manager Tools" >> $GITHUB_PATH 
-        shell: bash 
-
-      - name: Setup SSM KSP on windows latest 
-        run: | 
-          curl -X GET  https://one.digicert.com/signingmanager/api-ui/v1/releases/smtools-windows-x64.msi/download -H "x-api-key:%SM_API_KEY%" -o smtools-windows-x64.msi 
-          msiexec /i smtools-windows-x64.msi /quiet /qn 
-          smksp_registrar.exe list 
-          smctl.exe keypair ls 
-          C:\Windows\System32\certutil.exe -csp "DigiCert Signing Manager KSP" -key -user 
-          smksp_cert_sync.exe 
-        shell: cmd 
-
-      - name: Signing using Signtool 
-        run: | 
-          signtool.exe sign /sha1 ${{ secrets.SM_CODE_SIGNING_CERT_SHA1_HASH }} /tr http://timestamp.digicert.com /td SHA256 /fd SHA256 "artifact\msi\*.msi"
-          signtool.exe verify /v /pa "artifact\msi\*.msi"
-      
-      # TODO: for the updater, investigate if we need to also replace what's in the .zip, and what to do about the .sig file
-
-      - uses: actions/upload-artifact@v3
-        with:
-          path:  artifact/*
-
-
   publish-apps-release:
     runs-on: ubuntu-20.04
     if: github.event_name == 'release'
-    needs: [build-test-web, build-apps, sign-windows-msi]
+    needs: [build-test-web, build-apps]
     env:
       VERSION_NO_V: ${{ needs.build-test-web.outputs.version }}
       PUB_DATE: ${{ github.event.release.created_at }}
       NOTES: ${{ github.event.release.body }}
     steps:
-
       - uses: actions/download-artifact@v3
 
       - name: Generate the update static endpoint

.github/workflows/update-dev-branch.yml

@@ -16,7 +16,7 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v3.5.0
+      - uses: actions/checkout@v4
       - shell: bash
         run: |
           # checkout our branch

.gitignore

@@ -22,6 +22,11 @@ npm-debug.log*
 yarn-debug.log*
 yarn-error.log*
 
+.idea
+.vscode
+src/wasm-lib/.idea
+src/wasm-lib/.vscode
+
 # rust
 src/wasm-lib/target
 src/wasm-lib/bindings

README.md

@@ -123,13 +123,24 @@ Before you submit a contribution PR to this repo, please ensure that:
 
 ## Release a new version
 
-1. Bump the versions in the .json files by creating a `Bump to v{x}.{y}.{z}` PR, committing the changes from
+1. Bump the versions in the .json files by creating a `Cut release v{x}.{y}.{z}` PR, committing the changes from
 
 ```bash
 VERSION=x.y.z yarn run bump-jsons
 ```
 
-The PR may serve as a place to discuss the human-readable changelog and extra QA.
+The PR may serve as a place to discuss the human-readable changelog and extra QA. A quick way of getting PR's merged since the last bump is to [use this PR filter](https://github.com/KittyCAD/modeling-app/pulls?q=is%3Apr+sort%3Aupdated-desc+is%3Amerged+), open up the browser console and past in the following
+
+```typescript
+console.log(
+  '- ' +
+    Array.from(
+      document.querySelectorAll('[data-hovercard-type="pull_request"]')
+    ).map((a) => `[${a.innerText}](${a.href})`).join(`
+- `)
+)
+```
+grab the md list and delete any that are older than the last bump
 
 2. Merge the PR
 

docs/kcl/std.json

@@ -1,4 +1,60 @@
 [
+  {
+    "name": "abs",
+    "summary": "Computes the absolute value of a number.",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
+  {
+    "name": "acos",
+    "summary": "Computes the arccosine of a number (in radians).",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
   {
     "name": "angleToMatchLengthX",
     "summary": "Returns the angle to match the given length for x.",
@@ -7473,6 +7529,62 @@
     "unpublished": false,
     "deprecated": false
   },
+  {
+    "name": "asin",
+    "summary": "Computes the arcsine of a number (in radians).",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
+  {
+    "name": "atan",
+    "summary": "Computes the arctangent of a number (in radians).",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
   {
     "name": "bezierCurve",
     "summary": "Draw a bezier curve.",
@@ -8446,6 +8558,34 @@
     "unpublished": false,
     "deprecated": false
   },
+  {
+    "name": "ceil",
+    "summary": "Computes the smallest integer greater than or equal to a number.",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
   {
     "name": "close",
     "summary": "Close the current sketch.",
@@ -9350,6 +9490,24 @@
     "unpublished": false,
     "deprecated": false
   },
+  {
+    "name": "e",
+    "summary": "Return the value of Euler’s number `e`.",
+    "description": "",
+    "tags": [],
+    "args": [],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
   {
     "name": "extrude",
     "summary": "Extrudes by a given amount.",
@@ -9944,6 +10102,34 @@
     "unpublished": false,
     "deprecated": false
   },
+  {
+    "name": "floor",
+    "summary": "Computes the largest integer less than or equal to a number.",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
   {
     "name": "getExtrudeWallTransform",
     "summary": "Returns the extrude wall transform.",
@@ -13015,9 +13201,161 @@
     "unpublished": false,
     "deprecated": false
   },
+  {
+    "name": "ln",
+    "summary": "Computes the natural logarithm of the number.",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
+  {
+    "name": "log",
+    "summary": "Computes the logarithm of the number with respect to an arbitrary base.",
+    "description": "The result might not be correctly rounded owing to implementation details; `log2()` can produce more accurate results for base 2, and `log10()` can produce more accurate results for base 10.",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      },
+      {
+        "name": "base",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
+  {
+    "name": "log10",
+    "summary": "Computes the base 10 logarithm of the number.",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
+  {
+    "name": "log2",
+    "summary": "Computes the base 2 logarithm of the number.",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
+  {
+    "name": "max",
+    "summary": "Computes the maximum of the given arguments.",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "args",
+        "type": "[number]",
+        "schema": {
+          "type": "array",
+          "items": {
+            "type": "number",
+            "format": "double"
+          }
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
   {
     "name": "min",
-    "summary": "Returns the minimum of the given arguments.",
+    "summary": "Computes the minimum of the given arguments.",
     "description": "",
     "tags": [],
     "args": [
@@ -13048,7 +13386,7 @@
   },
   {
     "name": "pi",
-    "summary": "Return the value of `pi`.",
+    "summary": "Return the value of `pi`. Archimedes’ constant (π).",
     "description": "",
     "tags": [],
     "args": [],
@@ -13064,6 +13402,43 @@
     "unpublished": false,
     "deprecated": false
   },
+  {
+    "name": "pow",
+    "summary": "Computes the number to a power.",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      },
+      {
+        "name": "pow",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
   {
     "name": "segAng",
     "summary": "Returns the angle of the segment.",
@@ -15376,6 +15751,34 @@
     "unpublished": false,
     "deprecated": false
   },
+  {
+    "name": "sqrt",
+    "summary": "Computes the square root of a number.",
+    "description": "",
+    "tags": [],
+    "args": [
+      {
+        "name": "num",
+        "type": "number",
+        "schema": {
+          "type": "number",
+          "format": "double"
+        },
+        "required": true
+      }
+    ],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
   {
     "name": "startSketchAt",
     "summary": "Start a sketch at a given point.",
@@ -15891,6 +16294,24 @@
     "unpublished": false,
     "deprecated": false
   },
+  {
+    "name": "tau",
+    "summary": "Return the value of `tau`. The full circle constant (τ). Equal to 2π.",
+    "description": "",
+    "tags": [],
+    "args": [],
+    "returnValue": {
+      "name": "",
+      "type": "number",
+      "schema": {
+        "type": "number",
+        "format": "double"
+      },
+      "required": true
+    },
+    "unpublished": false,
+    "deprecated": false
+  },
   {
     "name": "xLine",
     "summary": "Draw a line on the x-axis.",

docs/kcl/std.md

@@ -5,6 +5,8 @@
 ## Table of Contents
 
 * [Functions](#functions)
+	* [`abs`](#abs)
+	* [`acos`](#acos)
 	* [`angleToMatchLengthX`](#angleToMatchLengthX)
 	* [`angleToMatchLengthY`](#angleToMatchLengthY)
 	* [`angledLine`](#angledLine)
@@ -14,10 +16,15 @@
 	* [`angledLineToX`](#angledLineToX)
 	* [`angledLineToY`](#angledLineToY)
 	* [`arc`](#arc)
+	* [`asin`](#asin)
+	* [`atan`](#atan)
 	* [`bezierCurve`](#bezierCurve)
+	* [`ceil`](#ceil)
 	* [`close`](#close)
 	* [`cos`](#cos)
+	* [`e`](#e)
 	* [`extrude`](#extrude)
+	* [`floor`](#floor)
 	* [`getExtrudeWallTransform`](#getExtrudeWallTransform)
 	* [`lastSegX`](#lastSegX)
 	* [`lastSegY`](#lastSegY)
@@ -26,16 +33,24 @@
 	* [`legLen`](#legLen)
 	* [`line`](#line)
 	* [`lineTo`](#lineTo)
+	* [`ln`](#ln)
+	* [`log`](#log)
+	* [`log10`](#log10)
+	* [`log2`](#log2)
+	* [`max`](#max)
 	* [`min`](#min)
 	* [`pi`](#pi)
+	* [`pow`](#pow)
 	* [`segAng`](#segAng)
 	* [`segEndX`](#segEndX)
 	* [`segEndY`](#segEndY)
 	* [`segLen`](#segLen)
 	* [`show`](#show)
 	* [`sin`](#sin)
+	* [`sqrt`](#sqrt)
 	* [`startSketchAt`](#startSketchAt)
 	* [`tan`](#tan)
+	* [`tau`](#tau)
 	* [`xLine`](#xLine)
 	* [`xLineTo`](#xLineTo)
 	* [`yLine`](#yLine)
@@ -44,6 +59,46 @@
 
 ## Functions
 
+### abs
+
+Computes the absolute value of a number.
+
+
+
+```
+abs(num: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+
+#### Returns
+
+* `number`
+
+
+
+### acos
+
+Computes the arccosine of a number (in radians).
+
+
+
+```
+acos(num: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+
+#### Returns
+
+* `number`
+
+
+
 ### angleToMatchLengthX
 
 Returns the angle to match the given length for x.
@@ -1332,6 +1387,46 @@ arc(data: ArcData, sketch_group: SketchGroup) -> SketchGroup
 
 
 
+### asin
+
+Computes the arcsine of a number (in radians).
+
+
+
+```
+asin(num: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+
+#### Returns
+
+* `number`
+
+
+
+### atan
+
+Computes the arctangent of a number (in radians).
+
+
+
+```
+atan(num: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+
+#### Returns
+
+* `number`
+
+
+
 ### bezierCurve
 
 Draw a bezier curve.
@@ -1497,6 +1592,26 @@ bezierCurve(data: BezierData, sketch_group: SketchGroup) -> SketchGroup
 
 
 
+### ceil
+
+Computes the smallest integer greater than or equal to a number.
+
+
+
+```
+ceil(num: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+
+#### Returns
+
+* `number`
+
+
+
 ### close
 
 Close the current sketch.
@@ -1661,6 +1776,25 @@ cos(num: number) -> number
 
 
 
+### e
+
+Return the value of Euler’s number `e`.
+
+
+
+```
+e() -> number
+```
+
+#### Arguments
+
+
+#### Returns
+
+* `number`
+
+
+
 ### extrude
 
 Extrudes by a given amount.
@@ -1770,6 +1904,26 @@ extrude(length: number, sketch_group: SketchGroup) -> ExtrudeGroup
 
 
 
+### floor
+
+Computes the largest integer less than or equal to a number.
+
+
+
+```
+floor(num: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+
+#### Returns
+
+* `number`
+
+
+
 ### getExtrudeWallTransform
 
 Returns the extrude wall transform.
@@ -2358,9 +2512,110 @@ lineTo(data: LineToData, sketch_group: SketchGroup) -> SketchGroup
 
 
 
+### ln
+
+Computes the natural logarithm of the number.
+
+
+
+```
+ln(num: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+
+#### Returns
+
+* `number`
+
+
+
+### log
+
+Computes the logarithm of the number with respect to an arbitrary base.
+
+The result might not be correctly rounded owing to implementation details; `log2()` can produce more accurate results for base 2, and `log10()` can produce more accurate results for base 10.
+
+```
+log(num: number, base: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+* `base`: `number`
+
+#### Returns
+
+* `number`
+
+
+
+### log10
+
+Computes the base 10 logarithm of the number.
+
+
+
+```
+log10(num: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+
+#### Returns
+
+* `number`
+
+
+
+### log2
+
+Computes the base 2 logarithm of the number.
+
+
+
+```
+log2(num: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+
+#### Returns
+
+* `number`
+
+
+
+### max
+
+Computes the maximum of the given arguments.
+
+
+
+```
+max(args: [number]) -> number
+```
+
+#### Arguments
+
+* `args`: `[number]`
+
+#### Returns
+
+* `number`
+
+
+
 ### min
 
-Returns the minimum of the given arguments.
+Computes the minimum of the given arguments.
 
 
 
@@ -2380,7 +2635,7 @@ min(args: [number]) -> number
 
 ### pi
 
-Return the value of `pi`.
+Return the value of `pi`. Archimedes’ constant (π).
 
 
 
@@ -2397,6 +2652,27 @@ pi() -> number
 
 
 
+### pow
+
+Computes the number to a power.
+
+
+
+```
+pow(num: number, pow: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+* `pow`: `number`
+
+#### Returns
+
+* `number`
+
+
+
 ### segAng
 
 Returns the angle of the segment.
@@ -2827,6 +3103,26 @@ sin(num: number) -> number
 
 
 
+### sqrt
+
+Computes the square root of a number.
+
+
+
+```
+sqrt(num: number) -> number
+```
+
+#### Arguments
+
+* `num`: `number`
+
+#### Returns
+
+* `number`
+
+
+
 ### startSketchAt
 
 Start a sketch at a given point.
@@ -2938,6 +3234,25 @@ tan(num: number) -> number
 
 
 
+### tau
+
+Return the value of `tau`. The full circle constant (τ). Equal to 2π.
+
+
+
+```
+tau() -> number
+```
+
+#### Arguments
+
+
+#### Returns
+
+* `number`
+
+
+
 ### xLine
 
 Draw a line on the x-axis.

package.json

@@ -1,6 +1,6 @@
 {
   "name": "untitled-app",
-  "version": "0.7.1",
+  "version": "0.9.2",
   "private": true,
   "dependencies": {
     "@codemirror/autocomplete": "^6.9.0",
@@ -10,7 +10,7 @@
     "@fortawesome/react-fontawesome": "^0.2.0",
     "@headlessui/react": "^1.7.13",
     "@headlessui/tailwindcss": "^0.2.0",
-    "@kittycad/lib": "^0.0.37",
+    "@kittycad/lib": "^0.0.39",
     "@lezer/javascript": "^1.4.7",
     "@open-rpc/client-js": "^1.8.1",
     "@react-hook/resize-observer": "^1.2.6",
@@ -27,6 +27,7 @@
     "@uiw/react-codemirror": "^4.21.13",
     "@xstate/react": "^3.2.2",
     "crypto-js": "^4.1.1",
+    "debounce-promise": "^3.1.2",
     "formik": "^2.4.3",
     "fuse.js": "^6.6.2",
     "http-server": "^14.1.1",
@@ -62,15 +63,17 @@
     "build:local": "vite build",
     "build:both": "vite build",
     "build:both:local": "yarn build:wasm && vite build",
+    "pretest": "yarn remove-importmeta",
     "test": "vitest --mode development",
     "test:nowatch": "vitest run --mode development",
-    "test:rust": "(cd src/wasm-lib && cargo test --all && cargo clippy --all --tests)",
+    "test:rust": "(cd src/wasm-lib && cargo test --all && cargo clippy --all --tests --benches)",
     "test:cov": "vitest run --coverage --mode development",
-    "simpleserver:ci": "http-server ./public --cors -p 3000 &",
-    "simpleserver": "http-server ./public --cors -p 3000",
+    "simpleserver:ci": "yarn pretest && http-server ./public --cors -p 3000 &",
+    "simpleserver": "yarn pretest && http-server ./public --cors -p 3000",
     "fmt": "prettier --write ./src",
     "fmt-check": "prettier --check ./src",
-    "build:wasm": "yarn wasm-prep && (cd src/wasm-lib && wasm-pack build --target web --out-dir pkg && cargo test -p kcl-lib export_bindings) && cp src/wasm-lib/pkg/wasm_lib_bg.wasm public && yarn fmt && yarn remove-importmeta",
+    "build:wasm": "(cd src/wasm-lib && wasm-pack build --target web --out-dir pkg && cargo test -p kcl-lib export_bindings) && cp src/wasm-lib/pkg/wasm_lib_bg.wasm public && yarn fmt",
+    "build:wasm-clean": "yarn wasm-prep && yarn build:wasm",
     "remove-importmeta": "sed -i 's/import.meta.url/window.location.origin/g' \"./src/wasm-lib/pkg/wasm_lib.js\"; sed -i '' 's/import.meta.url/window.location.origin/g' \"./src/wasm-lib/pkg/wasm_lib.js\" || echo \"sed for both mac and linux\"",
     "wasm-prep": "rm -rf src/wasm-lib/pkg && mkdir src/wasm-lib/pkg && rm -rf src/wasm-lib/kcl/bindings",
     "lint": "eslint --fix src",
@@ -99,7 +102,7 @@
     "@babel/preset-env": "^7.22.9",
     "@tauri-apps/cli": "^1.3.1",
     "@types/crypto-js": "^4.1.1",
-    "@types/debounce": "^1.2.1",
+    "@types/debounce-promise": "^3.1.6",
     "@types/isomorphic-fetch": "^0.0.36",
     "@types/react-modal": "^3.16.0",
     "@types/uuid": "^9.0.1",

src-tauri/Cargo.lock

@@ -155,6 +155,20 @@ version = "0.21.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "604178f6c5c21f02dc555784810edfb88d34ac2c73b2eae109655649ee73ce3d"
 
+[[package]]
+name = "bigdecimal"
+version = "0.4.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "454bca3db10617b88b566f205ed190aedb0e0e6dd4cad61d3988a72e8c5594cb"
+dependencies = [
+ "autocfg",
+ "libm",
+ "num-bigint",
+ "num-integer",
+ "num-traits",
+ "serde",
+]
+
 [[package]]
 name = "bincode"
 version = "1.3.3"
@@ -1630,13 +1644,14 @@ dependencies = [
 
 [[package]]
 name = "kittycad"
-version = "0.2.25"
+version = "0.2.26"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d9cf962b1e81a0b4eb923a727e761b40672cbacc7f5f0b75e13579d346352bc7"
+checksum = "e2623ee601ce203476229df3f9d3a14664cb43e3f7455e9ac8ed91aacaa6163d"
 dependencies = [
  "anyhow",
  "async-trait",
  "base64 0.21.2",
+ "bigdecimal",
  "bytes",
  "chrono",
  "data-encoding",
@@ -1688,6 +1703,12 @@ version = "0.2.148"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "9cdc71e17332e86d2e1d38c1f99edcb6288ee11b815fb1a4b049eaa2114d369b"
 
+[[package]]
+name = "libm"
+version = "0.2.7"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f7012b1bbb0719e1097c47611d3898568c546d597c2e74d66f6087edd5233ff4"
+
 [[package]]
 name = "line-wrap"
 version = "0.1.1"
@@ -1959,6 +1980,17 @@ dependencies = [
  "winapi",
 ]
 
+[[package]]
+name = "num-bigint"
+version = "0.4.4"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "608e7659b5c3d7cba262d894801b9ec9d00de989e8a82bd4bef91d08da45cdc0"
+dependencies = [
+ "autocfg",
+ "num-integer",
+ "num-traits",
+]
+
 [[package]]
 name = "num-integer"
 version = "0.1.45"
@@ -1982,9 +2014,9 @@ dependencies = [
 
 [[package]]
 name = "num-traits"
-version = "0.2.15"
+version = "0.2.16"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "578ede34cf02f8924ab9447f50c28075b4d3e5b269972345e7e0372b38c6cdcd"
+checksum = "f30b0abd723be7e2ffca1272140fac1a2f084c77ec3e123c192b66af1ee9e6c2"
 dependencies = [
  "autocfg",
 ]
@@ -2182,6 +2214,17 @@ dependencies = [
  "thiserror",
 ]
 
+[[package]]
+name = "os_info"
+version = "3.7.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "006e42d5b888366f1880eda20371fedde764ed2213dc8496f49622fa0c99cd5e"
+dependencies = [
+ "log",
+ "serde",
+ "winapi",
+]
+
 [[package]]
 name = "overload"
 version = "0.1.1"
@@ -2399,9 +2442,9 @@ dependencies = [
 
 [[package]]
 name = "phonenumber"
-version = "0.3.2+8.13.9"
+version = "0.3.3+8.13.9"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "34749f64ea9d76f10cdc8a859588b57775f59177c7dd91f744d620bd62982d6f"
+checksum = "635f3e6288e4f01c049d89332a031bd74f25d64b6fb94703ca966e819488cd06"
 dependencies = [
  "bincode",
  "either",
@@ -2414,6 +2457,7 @@ dependencies = [
  "regex-cache",
  "serde",
  "serde_derive",
+ "strum",
  "thiserror",
 ]
 
@@ -3010,10 +3054,11 @@ dependencies = [
 
 [[package]]
 name = "schemars"
-version = "0.8.13"
+version = "0.8.15"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "763f8cd0d4c71ed8389c90cb8100cba87e763bd01a8e614d4f0af97bcd50a161"
+checksum = "1f7b0ce13155372a76ee2e1c5ffba1fe61ede73fbea5630d61eee6fac4929c0c"
 dependencies = [
+ "bigdecimal",
  "bytes",
  "chrono",
  "dyn-clone",
@@ -3026,9 +3071,9 @@ dependencies = [
 
 [[package]]
 name = "schemars_derive"
-version = "0.8.13"
+version = "0.8.15"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ec0f696e21e10fa546b7ffb1c9672c6de8fbc7a81acf59524386d8639bf12737"
+checksum = "e85e2a16b12bdb763244c69ab79363d71db2b4b918a2def53f80b02e0574b13c"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -3152,9 +3197,9 @@ dependencies = [
 
 [[package]]
 name = "serde_json"
-version = "1.0.106"
+version = "1.0.107"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2cc66a619ed80bf7a0f6b17dd063a84b88f6dea1813737cf469aef1d081142c2"
+checksum = "6b420ce6e3d8bd882e9b243c6eed35dbc9a6110c9769e74b584e0d68d1f20c65"
 dependencies = [
  "itoa 1.0.6",
  "ryu",
@@ -3447,6 +3492,28 @@ dependencies = [
  "syn 2.0.33",
 ]
 
+[[package]]
+name = "strum"
+version = "0.24.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "063e6045c0e62079840579a7e47a355ae92f60eb74daaf156fb1e84ba164e63f"
+dependencies = [
+ "strum_macros",
+]
+
+[[package]]
+name = "strum_macros"
+version = "0.24.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "1e385be0d24f186b4ce2f9982191e7101bb737312ad61c1f2f984f34bcf85d59"
+dependencies = [
+ "heck 0.4.1",
+ "proc-macro2",
+ "quote",
+ "rustversion",
+ "syn 1.0.109",
+]
+
 [[package]]
 name = "syn"
 version = "1.0.109"
@@ -3469,6 +3536,19 @@ dependencies = [
  "unicode-ident",
 ]
 
+[[package]]
+name = "sys-locale"
+version = "0.2.4"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f8a11bd9c338fdba09f7881ab41551932ad42e405f61d01e8406baea71c07aee"
+dependencies = [
+ "js-sys",
+ "libc",
+ "wasm-bindgen",
+ "web-sys",
+ "windows-sys 0.45.0",
+]
+
 [[package]]
 name = "system-deps"
 version = "5.0.0"
@@ -3604,6 +3684,7 @@ dependencies = [
  "objc",
  "once_cell",
  "open",
+ "os_info",
  "percent-encoding",
  "rand 0.8.5",
  "raw-window-handle",
@@ -3616,6 +3697,7 @@ dependencies = [
  "serde_repr",
  "serialize-to-javascript",
  "state",
+ "sys-locale",
  "tar",
  "tauri-macros",
  "tauri-runtime",
@@ -3693,7 +3775,7 @@ dependencies = [
 [[package]]
 name = "tauri-plugin-fs-extra"
 version = "0.0.0"
-source = "git+https://github.com/tauri-apps/plugins-workspace?branch=v1#5b814f56e6368fdec46c4ddb04a07e0923ff995a"
+source = "git+https://github.com/tauri-apps/plugins-workspace?branch=v1#b04bde3461066c709d6801cf9ca305cf889a8394"
 dependencies = [
  "log",
  "serde",

src-tauri/Cargo.toml

@@ -16,11 +16,11 @@ tauri-build = { version = "1.4.0", features = [] }
 
 [dependencies]
 anyhow = "1"
-kittycad = "0.2.25"
+kittycad = "0.2.26"
 oauth2 = "4.4.2"
 serde = { version = "1.0", features = ["derive"] }
 serde_json = "1.0"
-tauri = { version = "1.4.1", features = ["dialog-all", "fs-all", "http-request", "path-all", "shell-open", "shell-open-api", "updater", "devtools"] }
+tauri = { version = "1.4.1", features = [ "os-all", "dialog-all", "fs-all", "http-request", "path-all", "shell-open", "shell-open-api", "updater", "devtools"] }
 tauri-plugin-fs-extra = { git = "https://github.com/tauri-apps/plugins-workspace", branch = "v1" }
 tokio = { version = "1.32.0", features = ["time"] }
 toml = "0.8.0"

src-tauri/src/main.rs

@@ -6,6 +6,7 @@ use std::io::Read;
 use anyhow::Result;
 use oauth2::TokenResponse;
 use tauri::{InvokeError, Manager};
+const DEFAULT_HOST: &str = "https://api.kittycad.io";
 
 /// This command returns the a json string parse from a toml file at the path.
 #[tauri::command]
@@ -88,11 +89,34 @@ async fn login(app: tauri::AppHandle, host: &str) -> Result<String, InvokeError>
 ///This command returns the KittyCAD user info given a token.
 /// The string returned from this method is the user info as a json string.
 #[tauri::command]
-async fn get_user(token: Option<String>) -> Result<kittycad::types::User, InvokeError> {
+async fn get_user(
+    token: Option<String>,
+    hostname: &str,
+) -> Result<kittycad::types::User, InvokeError> {
+    // Use the host passed in if it's set.
+    // Otherwise, use the default host.
+    let host = if hostname.is_empty() {
+        DEFAULT_HOST.to_string()
+    } else {
+        hostname.to_string()
+    };
+
+    // Change the baseURL to the one we want.
+    let mut baseurl = host.to_string();
+    if !host.starts_with("http://") && !host.starts_with("https://") {
+        baseurl = format!("https://{host}");
+        if host.starts_with("localhost") {
+            baseurl = format!("http://{host}")
+        }
+    }
     println!("Getting user info...");
 
     // use kittycad library to fetch the user info from /user/me
-    let client = kittycad::Client::new(token.unwrap());
+    let mut client = kittycad::Client::new(token.unwrap());
+
+    if baseurl != DEFAULT_HOST {
+        client.set_base_url(&baseurl);
+    }
 
     let user_info: kittycad::types::User = client
         .users()

src-tauri/tauri.conf.json

@@ -8,7 +8,7 @@
   },
   "package": {
     "productName": "kittycad-modeling",
-    "version": "0.7.1"
+    "version": "0.9.2"
   },
   "tauri": {
     "allowlist": {
@@ -36,6 +36,9 @@
           "https://api.dev.kittycad.io/*"
         ]
       },
+      "os": {
+        "all": true
+      },
       "shell": {
         "open": true
       },
@@ -71,9 +74,9 @@
       "shortDescription": "",
       "targets": "all",
       "windows": {
-        "certificateThumbprint": null,
+        "certificateThumbprint": "F4C9A52FF7BC26EE5E054946F6B11DEEA94C748D",
         "digestAlgorithm": "sha256",
-        "timestampUrl": ""
+        "timestampUrl": "http://timestamp.digicert.com"
       }
     },
     "security": {

src/App.tsx

@@ -1,7 +1,6 @@
 import { useRef, useEffect, useCallback, MouseEventHandler } from 'react'
 import { DebugPanel } from './components/DebugPanel'
 import { v4 as uuidv4 } from 'uuid'
-import { _executor } from './lang/executor'
 import { PaneType, useStore } from './useStore'
 import { Logs, KCLErrors } from './components/Logs'
 import { CollapsiblePanel } from './components/CollapsiblePanel'
@@ -32,6 +31,7 @@ import { TextEditor } from 'components/TextEditor'
 import { Themes, getSystemTheme } from 'lib/theme'
 import { useSetupEngineManager } from 'hooks/useSetupEngineManager'
 import { useEngineConnectionSubscriptions } from 'hooks/useEngineConnectionSubscriptions'
+import { engineCommandManager } from './lang/std/engineConnection'
 
 export function App() {
   const { code: loadedCode, project } = useLoaderData() as IndexLoaderData
@@ -40,7 +40,6 @@ export function App() {
   useHotKeyListener()
   const {
     setCode,
-    engineCommandManager,
     buttonDownInStream,
     openPanes,
     setOpenPanes,
@@ -48,16 +47,17 @@ export function App() {
     streamDimensions,
     guiMode,
     setGuiMode,
+    executeAst,
   } = useStore((s) => ({
     guiMode: s.guiMode,
     setGuiMode: s.setGuiMode,
     setCode: s.setCode,
-    engineCommandManager: s.engineCommandManager,
     buttonDownInStream: s.buttonDownInStream,
     openPanes: s.openPanes,
     setOpenPanes: s.setOpenPanes,
     didDragInStream: s.didDragInStream,
     streamDimensions: s.streamDimensions,
+    executeAst: s.executeAst,
   }))
 
   const {
@@ -88,14 +88,25 @@ export function App() {
     if (guiMode.mode === 'sketch') {
       if (guiMode.sketchMode === 'selectFace') return
       if (guiMode.sketchMode === 'sketchEdit') {
-        engineCommandManager?.sendSceneCommand({
+        // TODO: share this with Toolbar's "Exit sketch" button
+        // exiting sketch should be done consistently across all exits
+        engineCommandManager.sendSceneCommand({
           type: 'modeling_cmd_req',
           cmd_id: uuidv4(),
           cmd: { type: 'edit_mode_exit' },
         })
+        engineCommandManager.sendSceneCommand({
+          type: 'modeling_cmd_req',
+          cmd_id: uuidv4(),
+          cmd: { type: 'default_camera_disable_sketch_mode' },
+        })
         setGuiMode({ mode: 'default' })
+        // this is necessary to get the UI back into a consistent
+        // state right now, hopefully won't need to rerender
+        // when exiting sketch mode in the future
+        executeAst()
       } else {
-        engineCommandManager?.sendSceneCommand({
+        engineCommandManager.sendSceneCommand({
           type: 'modeling_cmd_req',
           cmd_id: uuidv4(),
           cmd: {
@@ -109,6 +120,7 @@ export function App() {
           rotation: guiMode.rotation,
           position: guiMode.position,
           pathToNode: guiMode.pathToNode,
+          pathId: guiMode.pathId,
           // todo: ...guiMod is adding isTooltip: true, will probably just fix with xstate migtaion
         })
       }
@@ -117,12 +129,13 @@ export function App() {
     }
   })
 
-  const paneOpacity =
-    onboardingStatus === onboardingPaths.CAMERA
-      ? 'opacity-20'
-      : didDragInStream
-      ? 'opacity-40'
-      : ''
+  const paneOpacity = [onboardingPaths.CAMERA, onboardingPaths.STREAMING].some(
+    (p) => p === onboardingStatus
+  )
+    ? 'opacity-20'
+    : didDragInStream
+    ? 'opacity-40'
+    : ''
 
   // Use file code loaded from disk
   // on mount, and overwrite any locally-stored code
@@ -142,7 +155,7 @@ export function App() {
   useEngineConnectionSubscriptions()
 
   const debounceSocketSend = throttle<EngineCommand>((message) => {
-    engineCommandManager?.sendSceneCommand(message)
+    engineCommandManager.sendSceneCommand(message)
   }, 16)
   const handleMouseMove: MouseEventHandler<HTMLDivElement> = (e) => {
     e.nativeEvent.preventDefault()
@@ -202,7 +215,6 @@ export function App() {
       } else if (interactionGuards.zoom.dragCallback(eWithButton)) {
         interaction = 'zoom'
       } else {
-        console.log('none')
         return
       }
 
@@ -255,7 +267,7 @@ export function App() {
             'hover:bg-liquid-30/40 dark:hover:bg-liquid-10/40 bg-transparent transition-colors duration-100 transition-ease-out delay-100',
         }}
       >
-        <div className="h-full flex flex-col justify-between">
+        <div id="code-pane" className="h-full flex flex-col justify-between">
           <CollapsiblePanel
             title="Code"
             icon={faCode}

src/Auth.tsx

@@ -6,9 +6,9 @@ export const Auth = ({ children }: React.PropsWithChildren) => {
   const {
     auth: { state },
   } = useGlobalStateContext()
-  const isLoggedIn = state.matches('checkIfLoggedIn')
+  const isLoggingIn = state.matches('checkIfLoggedIn')
 
-  return isLoggedIn ? (
+  return isLoggingIn ? (
     <Loading>Loading KittyCAD Modeling App...</Loading>
   ) : (
     <>{children}</>

src/Router.tsx

@@ -130,6 +130,7 @@ const router = createBrowserRouter(
       path: paths.INDEX,
       loader: () =>
         isTauri() ? redirect(paths.HOME) : redirect(paths.FILE + '/new'),
+      errorElement: <ErrorPage />,
     },
     {
       path: paths.FILE + '/:id',
@@ -140,7 +141,6 @@ const router = createBrowserRouter(
           {!isTauri() && import.meta.env.PROD && <DownloadAppBanner />}
         </Auth>
       ),
-      errorElement: <ErrorPage />,
       id: paths.FILE,
       loader: async ({
         request,

src/Toolbar.module.css

@@ -47,15 +47,52 @@
   @apply hover:bg-cool-20;
 }
 
-.smallScrollbar::-webkit-scrollbar {
+.toolbarButtons::-webkit-scrollbar {
   @apply h-0.5;
 }
 
-.smallScrollbar {
-  @apply overflow-x-auto;
+.toolbarButtons {
+  @apply flex items-center overflow-x-auto;
   scrollbar-width: thin;
 }
 
+.toolbarButtons button {
+  @apply text-chalkboard-90 bg-chalkboard-10/50 border-chalkboard-50 whitespace-nowrap;
+  display: inline-flex;
+  align-items: center;
+  justify-content: center;
+  @apply gap-1.5 p-0.5 pr-1;
+  @apply rounded-sm;
+}
+:global(.dark) .toolbarButtons button {
+  @apply text-chalkboard-30 bg-chalkboard-90/50 border-chalkboard-50;
+}
+.toolbarButtons button:hover {
+  @apply text-cool-90 bg-cool-10;
+}
+:global(.sketch) .toolbarButtons button:hover {
+  @apply text-fern-90 bg-fern-10;
+}
+.toolbarButtons button:disabled {
+  @apply text-chalkboard-70 bg-chalkboard-30;
+}
+.toolbarButtons button:disabled:hover {
+  @apply !bg-inherit !text-inherit cursor-not-allowed;
+}
+
+:global(.dark) .toolbarButtons button {
+  @apply text-chalkboard-20 border-chalkboard-50;
+}
+:global(.dark) .toolbarButtons button:hover {
+  @apply text-cool-10 border-chalkboard-50 bg-cool-90;
+}
+:global(.dark .sketch) .toolbarButtons button:hover {
+  @apply text-fern-10 border-chalkboard-50 bg-fern-90;
+}
+:global(.dark) .toolbarButtons button:disabled {
+  @apply text-chalkboard-40 bg-chalkboard-80;
+}
+
 :global(.dark) .popoverToggle {
   @apply hover:bg-cool-90;
 }

src/Toolbar.tsx

@@ -1,4 +1,4 @@
-import { useStore, toolTips, Selections } from './useStore'
+import { useStore, toolTips, ToolTip } from './useStore'
 import { extrudeSketch, sketchOnExtrudedFace } from './lang/modifyAst'
 import { getNodePathFromSourceRange } from './lang/queryAst'
 import { HorzVert } from './components/Toolbar/HorzVert'
@@ -17,6 +17,31 @@ import { Popover, Transition } from '@headlessui/react'
 import styles from './Toolbar.module.css'
 import { v4 as uuidv4 } from 'uuid'
 import { useAppMode } from 'hooks/useAppMode'
+import { ActionIcon } from 'components/ActionIcon'
+import { engineCommandManager } from './lang/std/engineConnection'
+
+export const sketchButtonClassnames = {
+  background:
+    'bg-chalkboard-100 group-hover:bg-chalkboard-90 hover:bg-chalkboard-90 dark:bg-fern-20 dark:group-hover:bg-fern-10 dark:hover:bg-fern-10 group-disabled:bg-chalkboard-50 dark:group-disabled:bg-chalkboard-60 group-hover:group-disabled:bg-chalkboard-50 dark:group-hover:group-disabled:bg-chalkboard-50',
+  icon: 'text-fern-20 h-auto group-hover:text-fern-10 hover:text-fern-10 dark:text-chalkboard-100 dark:group-hover:text-chalkboard-100 dark:hover:text-chalkboard-100 group-disabled:bg-chalkboard-60 hover:group-disabled:text-inherit',
+}
+
+const sketchFnLabels: Record<ToolTip | 'sketch_line' | 'move', string> = {
+  sketch_line: 'Line',
+  line: 'Line',
+  move: 'Move',
+  angledLine: 'Angled Line',
+  angledLineThatIntersects: 'Angled Line That Intersects',
+  angledLineOfXLength: 'Angled Line Of X Length',
+  angledLineOfYLength: 'Angled Line Of Y Length',
+  angledLineToX: 'Angled Line To X',
+  angledLineToY: 'Angled Line To Y',
+  lineTo: 'Line to Point',
+  xLine: 'Horizontal Line',
+  yLine: 'Vertical Line',
+  xLineTo: 'Horizontal Line to Point',
+  yLineTo: 'Vertical Line to Point',
+}
 
 export const Toolbar = () => {
   const {
@@ -26,7 +51,6 @@ export const Toolbar = () => {
     ast,
     updateAst,
     programMemory,
-    engineCommandManager,
     executeAst,
   } = useStore((s) => ({
     guiMode: s.guiMode,
@@ -35,18 +59,13 @@ export const Toolbar = () => {
     ast: s.ast,
     updateAst: s.updateAst,
     programMemory: s.programMemory,
-    engineCommandManager: s.engineCommandManager,
     executeAst: s.executeAst,
   }))
   useAppMode()
 
-  useEffect(() => {
-    console.log('guiMode', guiMode)
-  }, [guiMode])
-
-  function ToolbarButtons() {
+  function ToolbarButtons({ className }: React.HTMLAttributes<HTMLElement>) {
     return (
-      <span className={styles.smallScrollbar}>
+      <span className={styles.toolbarButtons + ' ' + className}>
         {guiMode.mode === 'default' && (
           <button
             onClick={() => {
@@ -55,7 +74,9 @@ export const Toolbar = () => {
                 sketchMode: 'selectFace',
               })
             }}
+            className="group"
           >
+            <ActionIcon icon="sketch" className="!p-0.5" size="md" />
             Start Sketch
           </button>
         )}
@@ -74,31 +95,31 @@ export const Toolbar = () => {
               )
               updateAst(modifiedAst, true)
             }}
+            className="group"
           >
-            SketchOnFace
+            <ActionIcon icon="sketch" className="!p-0.5" size="md" />
+            Sketch on Face
           </button>
         )}
         {guiMode.mode === 'canEditSketch' && (
           <button
             onClick={() => {
-              console.log('guiMode.pathId', guiMode.pathId)
-              engineCommandManager?.sendSceneCommand({
-                type: 'modeling_cmd_req',
-                cmd_id: uuidv4(),
-                cmd: {
-                  type: 'edit_mode_enter',
-                  target: guiMode.pathId,
-                },
-              })
+              const pathToNode = getNodePathFromSourceRange(
+                ast,
+                selectionRanges.codeBasedSelections[0].range
+              )
               setGuiMode({
                 mode: 'sketch',
-                sketchMode: 'sketchEdit',
-                pathToNode: guiMode.pathToNode,
-                rotation: guiMode.rotation,
-                position: guiMode.position,
+                sketchMode: 'enterSketchEdit',
+                pathToNode: pathToNode,
+                rotation: [0, 0, 0, 1],
+                position: [0, 0, 0],
+                pathId: guiMode.pathId,
               })
             }}
+            className="group"
           >
+            <ActionIcon icon="sketch" className="!p-0.5" size="md" />
             Edit Sketch
           </button>
         )}
@@ -117,8 +138,10 @@ export const Toolbar = () => {
                 )
                 updateAst(modifiedAst, true, { focusPath: pathToExtrudeArg })
               }}
+              className="group"
             >
-              ExtrudeSketch
+              <ActionIcon icon="extrude" className="!p-0.5" size="md" />
+              Extrude
             </button>
             <button
               onClick={() => {
@@ -134,8 +157,10 @@ export const Toolbar = () => {
                 )
                 updateAst(modifiedAst, true, { focusPath: pathToExtrudeArg })
               }}
+              className="group"
             >
-              ExtrudeSketch (w/o pipe)
+              <ActionIcon icon="extrude" className="!p-0.5" size="md" />
+              Extrude as new
             </button>
           </>
         )}
@@ -143,12 +168,12 @@ export const Toolbar = () => {
         {guiMode.mode === 'sketch' && (
           <button
             onClick={() => {
-              engineCommandManager?.sendSceneCommand({
+              engineCommandManager.sendSceneCommand({
                 type: 'modeling_cmd_req',
                 cmd_id: uuidv4(),
                 cmd: { type: 'edit_mode_exit' },
               })
-              engineCommandManager?.sendSceneCommand({
+              engineCommandManager.sendSceneCommand({
                 type: 'modeling_cmd_req',
                 cmd_id: uuidv4(),
                 cmd: { type: 'default_camera_disable_sketch_mode' },
@@ -157,7 +182,15 @@ export const Toolbar = () => {
               setGuiMode({ mode: 'default' })
               executeAst()
             }}
+            className="group"
           >
+            <ActionIcon
+              icon="exit"
+              className="!p-0.5"
+              bgClassName={sketchButtonClassnames.background}
+              iconClassName={sketchButtonClassnames.icon}
+              size="md"
+            />
             Exit sketch
           </button>
         )}
@@ -176,7 +209,7 @@ export const Toolbar = () => {
               <button
                 key={sketchFnName}
                 onClick={() => {
-                  engineCommandManager?.sendSceneCommand({
+                  engineCommandManager.sendSceneCommand({
                     type: 'modeling_cmd_req',
                     cmd_id: uuidv4(),
                     cmd: {
@@ -198,12 +231,25 @@ export const Toolbar = () => {
                           sketchMode: sketchFnName,
                           waitingFirstClick: true,
                           isTooltip: true,
+                          pathId: guiMode.pathId,
                         }),
                   })
                 }}
+                className={
+                  'group ' +
+                  (guiMode.sketchMode === sketchFnName
+                    ? '!text-fern-70 !bg-fern-10 !dark:text-fern-20 !border-fern-50'
+                    : '')
+                }
               >
-                {sketchFnName}
-                {guiMode.sketchMode === sketchFnName && '✅'}
+                <ActionIcon
+                  icon={sketchFnName.includes('line') ? 'line' : 'move'}
+                  className="!p-0.5"
+                  bgClassName={sketchButtonClassnames.background}
+                  iconClassName={sketchButtonClassnames.icon}
+                  size="md"
+                />
+                {sketchFnLabels[sketchFnName]}
               </button>
             )
           })}
@@ -234,7 +280,7 @@ export const Toolbar = () => {
         <span className={styles.toolbarCap + ' ' + styles.label}>
           {guiMode.mode === 'sketch' ? '2D' : '3D'}
         </span>
-        <menu className="flex flex-1 gap-2 py-0.5 overflow-hidden whitespace-nowrap">
+        <menu className="flex-1 gap-2 py-0.5 overflow-hidden whitespace-nowrap">
           <ToolbarButtons />
         </menu>
         <Popover.Button
@@ -275,7 +321,7 @@ export const Toolbar = () => {
             </Popover.Button>
           </section>
           <section>
-            <ToolbarButtons />
+            <ToolbarButtons className="flex-wrap" />
           </section>
         </Popover.Panel>
       </Transition>

src/components/ActionIcon.tsx

@@ -4,6 +4,7 @@ import {
 } from '@fortawesome/free-solid-svg-icons'
 import { IconDefinition as BrandIconDefinition } from '@fortawesome/free-brands-svg-icons'
 import { FontAwesomeIcon } from '@fortawesome/react-fontawesome'
+import { CustomIcon, CustomIconName } from './CustomIcon'
 
 const iconSizes = {
   sm: 12,
@@ -13,7 +14,7 @@ const iconSizes = {
 }
 
 export interface ActionIconProps extends React.PropsWithChildren {
-  icon?: SolidIconDefinition | BrandIconDefinition
+  icon?: SolidIconDefinition | BrandIconDefinition | CustomIconName
   className?: string
   bgClassName?: string
   iconClassName?: string
@@ -28,25 +29,39 @@ export const ActionIcon = ({
   size = 'md',
   children,
 }: ActionIconProps) => {
+  // By default, we reverse the icon color and background color in dark mode
+  const computedIconClassName =
+    iconClassName ||
+    `text-liquid-20 h-auto group-hover:text-liquid-10 hover:text-liquid-10 dark:text-chalkboard-100 dark:group-hover:text-chalkboard-100 dark:hover:text-chalkboard-100 group-disabled:bg-chalkboard-50 dark:group-disabled:bg-chalkboard-60 group-hover:group-disabled:bg-chalkboard-50 dark:group-hover:group-disabled:bg-chalkboard-50`
+
+  const computedBgClassName =
+    bgClassName ||
+    `bg-chalkboard-100 group-hover:bg-chalkboard-90 hover:bg-chalkboard-90 dark:bg-liquid-20 dark:group-hover:bg-liquid-10 dark:hover:bg-liquid-10 group-disabled:bg-chalkboard-80 dark:group-disabled:bg-chalkboard-80`
+
   return (
     <div
       className={
         `p-${
           size === 'xl' ? '2' : '1'
         } w-fit inline-grid place-content-center ${className} ` +
-        (bgClassName ||
-          'bg-chalkboard-100 group-hover:bg-chalkboard-90 hover:bg-chalkboard-90 dark:bg-liquid-20 dark:group-hover:bg-liquid-10 dark:hover:bg-liquid-10')
+        computedBgClassName
       }
     >
-      {children || (
+      {children ? (
+        children
+      ) : typeof icon === 'string' ? (
+        <CustomIcon
+          name={icon}
+          width={iconSizes[size]}
+          height={iconSizes[size]}
+          className={computedIconClassName}
+        />
+      ) : (
         <FontAwesomeIcon
           icon={icon}
           width={iconSizes[size]}
           height={iconSizes[size]}
-          className={
-            iconClassName ||
-            'text-liquid-20 h-auto group-hover:text-liquid-10 hover:text-liquid-10 dark:text-liquid-100 dark:group-hover:text-liquid-100 dark:hover:text-liquid-100'
-          }
+          className={computedIconClassName}
         />
       )}
     </div>

src/components/AppHeader.tsx

@@ -29,7 +29,7 @@ export const AppHeader = ({
   return (
     <header
       className={
-        (showToolbar ? 'grid ' : 'flex justify-between ') +
+        (showToolbar ? 'w-full grid ' : 'flex justify-between ') +
         styles.header +
         ' overlaid-panes sticky top-0 z-20 py-1 px-5 bg-chalkboard-10/70 dark:bg-chalkboard-100/50 border-b dark:border-b-2 border-chalkboard-30 dark:border-chalkboard-90 items-center ' +
         className
@@ -38,7 +38,7 @@ export const AppHeader = ({
       <ProjectSidebarMenu renderAsLink={!enableMenu} project={project} />
       {/* Toolbar if the context deems it */}
       {showToolbar && (
-        <div className="max-w-4xl">
+        <div className="max-w-lg md:max-w-xl lg:max-w-2xl xl:max-w-4xl 2xl:max-w-5xl">
           <Toolbar />
         </div>
       )}

src/components/AvailableVarsHelpers.tsx

@@ -10,6 +10,7 @@ import {
 } from '../lang/modifyAst'
 import { findAllPreviousVariables, PrevVariable } from '../lang/queryAst'
 import { useStore } from '../useStore'
+import { engineCommandManager } from '../lang/std/engineConnection'
 
 export const AvailableVars = ({
   onVarClick,
@@ -92,14 +93,11 @@ export function useCalc({
   newVariableInsertIndex: number
   setNewVariableName: (a: string) => void
 } {
-  const { ast, programMemory, selectionRange, engineCommandManager } = useStore(
-    (s) => ({
-      ast: s.ast,
-      programMemory: s.programMemory,
-      selectionRange: s.selectionRanges.codeBasedSelections[0].range,
-      engineCommandManager: s.engineCommandManager,
-    })
-  )
+  const { ast, programMemory, selectionRange } = useStore((s) => ({
+    ast: s.ast,
+    programMemory: s.programMemory,
+    selectionRange: s.selectionRanges.codeBasedSelections[0].range,
+  }))
   const inputRef = useRef<HTMLInputElement>(null)
   const [availableVarInfo, setAvailableVarInfo] = useState<
     ReturnType<typeof findAllPreviousVariables>
@@ -140,7 +138,6 @@ export function useCalc({
   }, [ast, programMemory, selectionRange])
 
   useEffect(() => {
-    if (!engineCommandManager) return
     try {
       const code = `const __result__ = ${value}\nshow(__result__)`
       const ast = parser_wasm(code)

src/components/CodeMenu.tsx

@@ -23,7 +23,8 @@ export const CodeMenu = ({ children }: PropsWithChildren) => {
       <div
         className="relative"
         onClick={(e) => {
-          if (e.eventPhase === 3) {
+          const target = e.target as HTMLElement
+          if (e.eventPhase === 3 && target.closest('a') === null) {
             e.stopPropagation()
             e.preventDefault()
           }

src/components/CommandBar.tsx

@@ -62,7 +62,7 @@ export const CommandBarProvider = ({
 
 const CommandBar = () => {
   const { commands, commandBarOpen, setCommandBarOpen } = useCommandsContext()
-  useHotkeys('meta+k', () => {
+  useHotkeys(['meta+k', 'meta+/'], () => {
     if (commands.length === 0) return
     setCommandBarOpen(!commandBarOpen)
   })
@@ -221,10 +221,10 @@ const CommandBar = () => {
           <Combobox
             value={selectedCommand}
             onChange={handleCommandSelection}
-            className="rounded relative mx-auto p-2 bg-chalkboard-10 dark:bg-chalkboard-100 border dark:border-chalkboard-70 max-w-xl w-full shadow-lg"
+            className="relative w-full max-w-xl p-2 mx-auto border rounded shadow-lg bg-chalkboard-10 dark:bg-chalkboard-100 dark:border-chalkboard-70"
             as="div"
           >
-            <div className="flex gap-2 items-center">
+            <div className="flex items-center gap-2">
               <ActionIcon icon={faSearch} size="xl" className="rounded-sm" />
               <div>
                 {inSubCommand && (
@@ -235,7 +235,7 @@ const CommandBar = () => {
                 )}
                 <Combobox.Input
                   onChange={(event) => setQuery(event.target.value)}
-                  className="bg-transparent focus:outline-none w-full"
+                  className="w-full bg-transparent focus:outline-none"
                   onKeyDown={(event) => {
                     if (event.metaKey && event.key === 'k')
                       setCommandBarOpen(false)
@@ -264,12 +264,12 @@ const CommandBar = () => {
                 />
               </div>
             </div>
-            <Combobox.Options static className="max-h-96 overflow-y-auto">
+            <Combobox.Options static className="overflow-y-auto max-h-96">
               {filteredCommands?.map((commandResult) => (
                 <Combobox.Option
                   key={commandResult.item.name}
                   value={commandResult}
-                  className="my-2 first:mt-4 last:mb-4 ui-active:bg-liquid-10 dark:ui-active:bg-liquid-90 py-1 px-2"
+                  className="px-2 py-1 my-2 first:mt-4 last:mb-4 ui-active:bg-liquid-10 dark:ui-active:bg-liquid-90"
                 >
                   <p>{commandResult.item.name}</p>
                   {(commandResult.item as SubCommand).description && (

src/components/CustomIcon.tsx

@@ -0,0 +1,161 @@
+export type CustomIconName =
+  | 'equal'
+  | 'exit'
+  | 'extrude'
+  | 'horizontal'
+  | 'line'
+  | 'move'
+  | 'parallel'
+  | 'sketch'
+  | 'vertical'
+
+export const CustomIcon = ({
+  name,
+  ...props
+}: {
+  name: CustomIconName
+} & React.SVGProps<SVGSVGElement>) => {
+  switch (name) {
+    case 'equal':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            d="M5 8.78V7H14.52V8.78H5ZM5 13.02V11.24H14.52V13.02H5Z"
+            fill="currentColor"
+          />
+        </svg>
+      )
+    case 'exit':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            d="M17 10L3 10M3 10L6.5 6.5M3 10L6.5 13.5"
+            stroke="currentColor"
+          />
+        </svg>
+      )
+
+    case 'extrude':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            fillRule="evenodd"
+            clipRule="evenodd"
+            d="M10 3L10.3536 3.35355L12.3536 5.35355L11.6465 6.06066L10.5 4.91421V11.5854C11.0826 11.7913 11.5 12.3469 11.5 13C11.5 13.8284 10.8284 14.5 10 14.5C9.17157 14.5 8.5 13.8284 8.5 13C8.5 12.3469 8.91741 11.7913 9.5 11.5854V4.91421L8.35356 6.06066L7.64645 5.35355L9.64645 3.35355L10 3ZM1.95887 12.3282L8 8.63644V9.80838L2.91773 12.9142L10 17.2423L17.0823 12.9142L12 9.80838V8.63644L18.0411 12.3282L19 12.9142L19 14.9683H18V13.5253L10.5 18.1087V19.9683H9.5V18.1087L2 13.5253V14.9683H1L1 12.9142L1.95887 12.3282Z"
+            fill="currentColor"
+          />
+        </svg>
+      )
+    case 'horizontal':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            fillRule="evenodd"
+            clipRule="evenodd"
+            d="M4 9.5H16V11.5H4V9.5Z"
+            fill="currentColor"
+          />
+        </svg>
+      )
+    case 'line':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            fillRule="evenodd"
+            clipRule="evenodd"
+            d="M15.5 6C16.3284 6 17 5.32843 17 4.5C17 3.67157 16.3284 3 15.5 3C14.6716 3 14 3.67157 14 4.5C14 4.73107 14.0522 4.94993 14.1456 5.14543L5.14543 14.1456C4.94993 14.0522 4.73107 14 4.5 14C3.67157 14 3 14.6716 3 15.5C3 16.3284 3.67157 17 4.5 17C5.32843 17 6 16.3284 6 15.5C6 15.2679 5.94729 15.0482 5.8532 14.852L14.852 5.8532C15.0482 5.94729 15.2679 6 15.5 6Z"
+            fill="currentColor"
+          />
+        </svg>
+      )
+    case 'move':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            fillRule="evenodd"
+            clipRule="evenodd"
+            d="M10 2.29289L10.3536 2.64645L12.3536 4.64645L11.6465 5.35355L10.5 4.20711V8V9.50001H12L15.7929 9.50001L14.6465 8.35356L15.3536 7.64645L17.3536 9.64645L17.7071 10L17.3536 10.3536L15.3536 12.3536L14.6465 11.6465L15.7929 10.5H12H10.5V12V15.7929L11.6465 14.6464L12.3536 15.3536L10.3536 17.3536L10 17.7071L9.64645 17.3536L7.64645 15.3536L8.35356 14.6464L9.50001 15.7929V12V10.5H8.00001H4.20712L5.35357 11.6465L4.64646 12.3536L2.64646 10.3536L2.29291 10L2.64646 9.64645L4.64646 7.64645L5.35357 8.35356L4.20712 9.50001H8.00001H9.50001V8V4.20711L8.35356 5.35355L7.64645 4.64645L9.64645 2.64645L10 2.29289Z"
+            fill="currentColor"
+          />
+        </svg>
+      )
+    case 'parallel':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            fillRule="evenodd"
+            clipRule="evenodd"
+            d="M8 16V4H6V16H8ZM14 16V4H12V16H14Z"
+            fill="currentColor"
+          />
+        </svg>
+      )
+    case 'sketch':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            fillRule="evenodd"
+            clipRule="evenodd"
+            d="M14.8037 13.4035L15.5509 14.1635L16.3682 16.8386L13.5521 16.1346L12.8186 15.3885L14.8037 13.4035ZM14.1025 12.6903L12.1175 14.6754L3.48609 5.89624C2.94588 5.34678 2.94963 4.46456 3.49448 3.91971C4.04591 3.36828 4.94112 3.37208 5.48786 3.92817L14.1025 12.6903ZM6.20094 3.22709L16.4357 13.6371L17.5003 17.1216L17.8412 18.2376L16.7091 17.9546L13.0364 17.0364L2.77301 6.59732C1.84793 5.6564 1.85434 4.14564 2.78737 3.2126C3.73167 2.2683 5.26468 2.27481 6.20094 3.22709Z"
+            fill="currentColor"
+          />
+        </svg>
+      )
+    case 'vertical':
+      return (
+        <svg
+          {...props}
+          viewBox="0 0 20 20"
+          fill="none"
+          xmlns="http://www.w3.org/2000/svg"
+        >
+          <path
+            fillRule="evenodd"
+            clipRule="evenodd"
+            d="M11 4V16H9V4H11Z"
+            fill="currentColor"
+          />
+        </svg>
+      )
+  }
+}

src/components/DebugPanel.tsx

@@ -1,5 +1,4 @@
 import { CollapsiblePanel, CollapsiblePanelProps } from './CollapsiblePanel'
-import { useStore } from '../useStore'
 import { v4 as uuidv4 } from 'uuid'
 import { EngineCommand } from '../lang/std/engineConnection'
 import { useState } from 'react'
@@ -7,6 +6,7 @@ import { ActionButton } from '../components/ActionButton'
 import { faCheck } from '@fortawesome/free-solid-svg-icons'
 import { isReducedMotion } from 'lang/util'
 import { AstExplorer } from './AstExplorer'
+import { engineCommandManager } from '../lang/std/engineConnection'
 
 type SketchModeCmd = Extract<
   Extract<EngineCommand, { type: 'modeling_cmd_req' }>['cmd'],
@@ -14,9 +14,6 @@ type SketchModeCmd = Extract<
 >
 
 export const DebugPanel = ({ className, ...props }: CollapsiblePanelProps) => {
-  const { engineCommandManager } = useStore((s) => ({
-    engineCommandManager: s.engineCommandManager,
-  }))
   const [sketchModeCmd, setSketchModeCmd] = useState<SketchModeCmd>({
     type: 'default_camera_enable_sketch_mode',
     origin: { x: 0, y: 0, z: 0 },
@@ -30,7 +27,11 @@ export const DebugPanel = ({ className, ...props }: CollapsiblePanelProps) => {
   return (
     <CollapsiblePanel
       {...props}
-      className={'!absolute !h-auto bottom-5 right-5 ' + className}
+      className={
+        '!absolute overflow-hidden !h-auto bottom-5 right-5 ' + className
+      }
+      // header height, top-5, and bottom-5
+      style={{ maxHeight: 'calc(100% - 3rem - 1.25rem - 1.25rem)' }}
     >
       <section className="p-4 flex flex-col gap-4">
         <Xyz
@@ -66,19 +67,18 @@ export const DebugPanel = ({ className, ...props }: CollapsiblePanelProps) => {
             className="w-16"
             type="checkbox"
             checked={sketchModeCmd.ortho}
-            onChange={(a) => {
-              console.log(a, (a as any).checked)
+            onChange={(a) =>
               setSketchModeCmd({
                 ...sketchModeCmd,
                 ortho: a.target.checked,
               })
-            }}
+            }
           />
         </div>
         <ActionButton
           Element="button"
           onClick={() => {
-            engineCommandManager?.sendSceneCommand({
+            engineCommandManager.sendSceneCommand({
               type: 'modeling_cmd_req',
               cmd: sketchModeCmd,
               cmd_id: uuidv4(),

src/components/DownloadAppBanner.tsx

@@ -40,12 +40,12 @@ const DownloadAppBanner = () => {
           </code>
           , and isn't backed up anywhere! Visit{' '}
           <a
-            href="https://github.com/KittyCAD/modeling-app/releases"
+            href="https://kittycad.io/modeling-app/download"
             rel="noopener noreferrer"
             target="_blank"
             className="text-warn-80 dark:text-warn-80 dark:hover:text-warn-70 underline"
           >
-            our GitHub repository
+            our website
           </a>{' '}
           to download the app for the best experience.
         </p>

src/components/ErrorPage.tsx

@@ -1,8 +1,62 @@
+import { isTauri } from 'lib/isTauri'
+import { useRouteError, isRouteErrorResponse } from 'react-router-dom'
+import { ActionButton } from './ActionButton'
+import {
+  faBug,
+  faHome,
+  faRefresh,
+  faTrash,
+} from '@fortawesome/free-solid-svg-icons'
+
 export const ErrorPage = () => {
+  let error = useRouteError()
+
+  console.error('error', error)
+
   return (
     <div className="flex flex-col items-center justify-center h-screen">
-      <h1 className="text-4xl font-bold">404</h1>
-      <p className="text-2xl font-bold">Page not found</p>
+      <section className="max-w-full xl:max-w-4xl mx-auto">
+        <h1 className="text-4xl mb-8 font-bold">
+          An unexpected error occurred
+        </h1>
+        {isRouteErrorResponse(error) && (
+          <p className="mb-8">
+            {error.status}: {error.data}
+          </p>
+        )}
+        <div className="flex justify-between gap-2 mt-6">
+          {isTauri() && (
+            <ActionButton Element="link" to={'/'} icon={{ icon: faHome }}>
+              Go Home
+            </ActionButton>
+          )}
+          <ActionButton
+            Element="button"
+            icon={{ icon: faRefresh }}
+            onClick={() => window.location.reload()}
+          >
+            Reload
+          </ActionButton>
+          <ActionButton
+            Element="button"
+            icon={{ icon: faTrash }}
+            onClick={() => {
+              window.localStorage.clear()
+            }}
+          >
+            Clear storage
+          </ActionButton>
+          <ActionButton
+            Element="link"
+            icon={{ icon: faBug }}
+            target="_blank"
+            rel="noopener noreferrer"
+            to="https://discord.com/channels/915388055236509727/1138967922614743060"
+          >
+            Report Bug
+          </ActionButton>
+        </div>
+      </section>
     </div>
   )
 }

src/components/ExportButton.tsx

@@ -1,11 +1,11 @@
 import { v4 as uuidv4 } from 'uuid'
-import { useStore } from '../useStore'
 import { faFileExport, faXmark } from '@fortawesome/free-solid-svg-icons'
 import { ActionButton } from './ActionButton'
 import Modal from 'react-modal'
 import React from 'react'
 import { useFormik } from 'formik'
 import { Models } from '@kittycad/lib'
+import { engineCommandManager } from '../lang/std/engineConnection'
 
 type OutputFormat = Models['OutputFormat_type']
 
@@ -18,10 +18,6 @@ interface ExportButtonProps extends React.PropsWithChildren {
 }
 
 export const ExportButton = ({ children, className }: ExportButtonProps) => {
-  const { engineCommandManager } = useStore((s) => ({
-    engineCommandManager: s.engineCommandManager,
-  }))
-
   const [modalIsOpen, setIsOpen] = React.useState(false)
 
   const defaultType = 'gltf'
@@ -66,7 +62,7 @@ export const ExportButton = ({ children, className }: ExportButtonProps) => {
           },
         }
       }
-      engineCommandManager?.sendSceneCommand({
+      engineCommandManager.sendSceneCommand({
         type: 'modeling_cmd_req',
         cmd: {
           type: 'export',

src/components/MemoryPanel.tsx

@@ -24,7 +24,11 @@ export const MemoryPanel = ({
     <CollapsiblePanel {...props}>
       <div className="h-full relative">
         <div className="absolute inset-0 flex flex-col items-start">
-          <div className=" h-full console-tile w-full">
+          <div
+            className="overflow-y-auto h-full console-tile w-full"
+            style={{ marginBottom: 36 }}
+          >
+            {/* 36px is the height of PanelHeader */}
             <ReactJson
               src={ProcessedMemory}
               collapsed={1}
@@ -46,7 +50,7 @@ export const MemoryPanel = ({
 
 export const processMemory = (programMemory: ProgramMemory) => {
   const processedMemory: any = {}
-  Object.keys(programMemory.root).forEach((key) => {
+  Object.keys(programMemory?.root || {}).forEach((key) => {
     const val = programMemory.root[key]
     if (typeof val.value !== 'function') {
       if (val.type === 'SketchGroup') {

src/components/OpenFileButton.tsx

@@ -1,42 +0,0 @@
-import { invoke } from '@tauri-apps/api/tauri'
-import { open } from '@tauri-apps/api/dialog'
-import { useStore } from '../useStore'
-
-export const OpenFileButton = () => {
-  const { setCode } = useStore((s) => ({
-    setCode: s.setCode,
-  }))
-  const handleClick = async () => {
-    const selected = await open({
-      multiple: false,
-      directory: false,
-      filters: [
-        {
-          name: 'CAD',
-          extensions: ['toml'],
-        },
-      ],
-    })
-    if (Array.isArray(selected)) {
-      // User selected multiple files
-      // We should not get here, since multiple is false.
-    } else if (selected === null) {
-      // User cancelled the selection
-      // Do nothing.
-    } else {
-      // User selected a single file
-      // We want to invoke our command to read the file.
-      const json: string = await invoke('read_toml', { path: selected })
-      const packageDetails = JSON.parse(json).package
-      if (packageDetails.main) {
-        const absPath = [
-          ...selected.split('/').slice(0, -1),
-          packageDetails.main,
-        ].join('/')
-        const file: string = await invoke('read_txt_file', { path: absPath })
-        setCode(file)
-      }
-    }
-  }
-  return <button onClick={() => handleClick()}>Open File</button>
-}

src/components/ProjectSidebarMenu.tsx

@@ -16,8 +16,8 @@ const ProjectSidebarMenu = ({
 }) => {
   return renderAsLink ? (
     <Link
-      to={'../'}
-      className="flex items-center gap-4 my-2"
+      to={paths.HOME}
+      className="h-9 max-h-min min-w-max border-0 p-0.5 pr-2 flex items-center gap-4 focus-visible:outline-none focus-visible:ring-1 focus-visible:ring-energy-50"
       data-testid="project-sidebar-link"
     >
       <img
@@ -26,7 +26,7 @@ const ProjectSidebarMenu = ({
         className="h-9 w-auto"
       />
       <span
-        className="text-sm text-chalkboard-110 dark:text-chalkboard-20 min-w-max"
+        className="text-sm text-chalkboard-110 dark:text-chalkboard-20 whitespace-nowrap hidden lg:block"
         data-testid="project-sidebar-link-name"
       >
         {project?.name ? project.name : 'KittyCAD Modeling App'}
@@ -35,15 +35,15 @@ const ProjectSidebarMenu = ({
   ) : (
     <Popover className="relative">
       <Popover.Button
-        className="border-0 p-0.5 pr-2 flex items-center gap-4 focus-visible:outline-none focus-visible:ring-1 focus-visible:ring-energy-50"
+        className="h-9 max-h-min min-w-max border-0 p-0.5 pr-2 flex items-center gap-4 focus-visible:outline-none focus-visible:ring-1 focus-visible:ring-energy-50"
         data-testid="project-sidebar-toggle"
       >
         <img
           src="/kitt-8bit-winking.svg"
           alt="KittyCAD App"
-          className="h-9 w-auto"
+          className="h-full w-auto"
         />
-        <span className="text-sm text-chalkboard-110 dark:text-chalkboard-20 min-w-max">
+        <span className="text-sm text-chalkboard-110 dark:text-chalkboard-20 whitespace-nowrap hidden lg:block">
           {isTauri() && project?.name ? project.name : 'KittyCAD Modeling App'}
         </span>
       </Popover.Button>

src/components/Stream.tsx

@@ -21,6 +21,11 @@ import {
 } from 'lang/std/sketch'
 import { getNodeFromPath } from 'lang/queryAst'
 import { Program, VariableDeclarator } from 'lang/abstractSyntaxTreeTypes'
+import { modify_ast_for_sketch } from '../wasm-lib/pkg/wasm_lib'
+import { KCLError } from 'lang/errors'
+import { KclError as RustKclError } from '../wasm-lib/kcl/bindings/KclError'
+import { rangeTypeFix } from 'lang/abstractSyntaxTree'
+import { engineCommandManager } from '../lang/std/engineConnection'
 
 export const Stream = ({ className = '' }) => {
   const [isLoading, setIsLoading] = useState(true)
@@ -28,7 +33,6 @@ export const Stream = ({ className = '' }) => {
   const videoRef = useRef<HTMLVideoElement>(null)
   const {
     mediaStream,
-    engineCommandManager,
     setButtonDownInStream,
     didDragInStream,
     setDidDragInStream,
@@ -41,7 +45,6 @@ export const Stream = ({ className = '' }) => {
     programMemory,
   } = useStore((s) => ({
     mediaStream: s.mediaStream,
-    engineCommandManager: s.engineCommandManager,
     setButtonDownInStream: s.setButtonDownInStream,
     fileId: s.fileId,
     didDragInStream: s.didDragInStream,
@@ -69,7 +72,7 @@ export const Stream = ({ className = '' }) => {
     if (!videoRef.current) return
     if (!mediaStream) return
     videoRef.current.srcObject = mediaStream
-  }, [mediaStream, engineCommandManager])
+  }, [mediaStream])
 
   const handleMouseDown: MouseEventHandler<HTMLVideoElement> = (e) => {
     if (!videoRef.current) return
@@ -103,7 +106,7 @@ export const Stream = ({ className = '' }) => {
     }
 
     if (guiMode.mode === 'sketch' && guiMode.sketchMode === ('move' as any)) {
-      engineCommandManager?.sendSceneCommand({
+      engineCommandManager.sendSceneCommand({
         type: 'modeling_cmd_req',
         cmd: {
           type: 'handle_mouse_drag_start',
@@ -117,7 +120,7 @@ export const Stream = ({ className = '' }) => {
         guiMode.sketchMode === ('sketch_line' as any)
       )
     ) {
-      engineCommandManager?.sendSceneCommand({
+      engineCommandManager.sendSceneCommand({
         type: 'modeling_cmd_req',
         cmd: {
           type: 'camera_drag_start',
@@ -135,7 +138,7 @@ export const Stream = ({ className = '' }) => {
   const handleScroll: WheelEventHandler<HTMLVideoElement> = (e) => {
     if (!cameraMouseDragGuards[cameraControls].zoom.scrollCallback(e)) return
 
-    engineCommandManager?.sendSceneCommand({
+    engineCommandManager.sendSceneCommand({
       type: 'modeling_cmd_req',
       cmd: {
         type: 'default_camera_zoom',
@@ -173,7 +176,7 @@ export const Stream = ({ className = '' }) => {
     }
 
     if (!didDragInStream) {
-      engineCommandManager?.sendSceneCommand({
+      engineCommandManager.sendSceneCommand({
         type: 'modeling_cmd_req',
         cmd: {
           type: 'select_with_point',
@@ -210,15 +213,10 @@ export const Stream = ({ className = '' }) => {
         window: { x, y },
       }
     }
-    engineCommandManager?.sendSceneCommand(command).then(async (resp) => {
-      if (command?.cmd?.type !== 'mouse_click' || !ast) return
-      if (
-        !(
-          guiMode.mode === 'sketch' &&
-          guiMode.sketchMode === ('sketch_line' as any as 'line')
-        )
-      )
-        return
+    engineCommandManager.sendSceneCommand(command).then(async (resp) => {
+      if (!(guiMode.mode === 'sketch')) return
+
+      if (guiMode.sketchMode === 'selectFace') return
 
       // Check if the sketch group already exists.
       const varDec = getNodeFromPath<VariableDeclarator>(
@@ -230,13 +228,60 @@ export const Stream = ({ className = '' }) => {
       const sketchGroup = programMemory.root[variableName]
       const isEditingExistingSketch =
         sketchGroup?.type === 'SketchGroup' && sketchGroup.value.length
+      let sketchGroupId = ''
+      if (sketchGroup && sketchGroup.type === 'SketchGroup') {
+        sketchGroupId = sketchGroup.id
+      }
+
+      if (
+        guiMode.sketchMode === ('move' as any as 'line') &&
+        command.cmd.type === 'handle_mouse_drag_end'
+      ) {
+        // Let's get the updated ast.
+        if (sketchGroupId === '') return
+        // We have a problem if we do not have an id for the sketch group.
+        if (
+          guiMode.pathId === undefined ||
+          guiMode.pathId === null ||
+          guiMode.pathId === ''
+        )
+          return
+
+        let engineId = guiMode.pathId
+
+        try {
+          const updatedAst: Program = await modify_ast_for_sketch(
+            engineCommandManager,
+            JSON.stringify(ast),
+            variableName,
+            engineId
+          )
+
+          updateAst(updatedAst, false)
+        } catch (e: any) {
+          const parsed: RustKclError = JSON.parse(e.toString())
+          const kclError = new KCLError(
+            parsed.kind,
+            parsed.msg,
+            rangeTypeFix(parsed.sourceRanges)
+          )
+
+          console.log(kclError)
+          throw kclError
+        }
+        return
+      }
+
+      if (command?.cmd?.type !== 'mouse_click' || !ast) return
+
+      if (!(guiMode.sketchMode === ('sketch_line' as any as 'line'))) return
 
       if (
         resp?.data?.data?.entities_modified?.length &&
         guiMode.waitingFirstClick &&
         !isEditingExistingSketch
       ) {
-        const curve = await engineCommandManager?.sendSceneCommand({
+        const curve = await engineCommandManager.sendSceneCommand({
           type: 'modeling_cmd_req',
           cmd_id: uuidv4(),
           cmd: {
@@ -257,6 +302,16 @@ export const Stream = ({ className = '' }) => {
         const _modifiedAst = _addStartSketch.modifiedAst
         const _pathToNode = _addStartSketch.pathToNode
 
+        // We need to update the guiMode with the right pathId so that we can
+        // move lines later and send the right sketch id to the engine.
+        for (const [id, artifact] of Object.entries(
+          engineCommandManager.artifactMap
+        )) {
+          if (artifact.commandType === 'start_path') {
+            guiMode.pathId = id
+          }
+        }
+
         setGuiMode({
           ...guiMode,
           pathToNode: _pathToNode,
@@ -267,7 +322,7 @@ export const Stream = ({ className = '' }) => {
         resp?.data?.data?.entities_modified?.length &&
         (!guiMode.waitingFirstClick || isEditingExistingSketch)
       ) {
-        const curve = await engineCommandManager?.sendSceneCommand({
+        const curve = await engineCommandManager.sendSceneCommand({
           type: 'modeling_cmd_req',
           cmd_id: uuidv4(),
           cmd: {
@@ -312,12 +367,15 @@ export const Stream = ({ className = '' }) => {
           setGuiMode({
             mode: 'default',
           })
-          engineCommandManager?.sendSceneCommand({
+          engineCommandManager.sendSceneCommand({
             type: 'modeling_cmd_req',
             cmd_id: uuidv4(),
-            cmd: {
-              type: 'sketch_mode_disable',
-            },
+            cmd: { type: 'edit_mode_exit' },
+          })
+          engineCommandManager.sendSceneCommand({
+            type: 'modeling_cmd_req',
+            cmd_id: uuidv4(),
+            cmd: { type: 'default_camera_disable_sketch_mode' },
           })
           updateAst(_modifiedAst, true)
         }

src/components/TextEditor.tsx

@@ -30,6 +30,7 @@ import { isOverlap, roundOff } from 'lib/utils'
 import { kclErrToDiagnostic } from 'lang/errors'
 import { CSSRuleObject } from 'tailwindcss/types/config'
 import interact from '@replit/codemirror-interact'
+import { engineCommandManager } from '../lang/std/engineConnection'
 
 export const editorShortcutMeta = {
   formatCode: {
@@ -52,7 +53,6 @@ export const TextEditor = ({
     code,
     deferredSetCode,
     editorView,
-    engineCommandManager,
     formatCode,
     isLSPServerReady,
     selectionRanges,
@@ -64,7 +64,6 @@ export const TextEditor = ({
     code: s.code,
     deferredSetCode: s.deferredSetCode,
     editorView: s.editorView,
-    engineCommandManager: s.engineCommandManager,
     formatCode: s.formatCode,
     isLSPServerReady: s.isLSPServerReady,
     selectionRanges: s.selectionRanges,
@@ -173,7 +172,7 @@ export const TextEditor = ({
     const idBasedSelections = codeBasedSelections
       .map(({ type, range }) => {
         const hasOverlap = Object.entries(
-          engineCommandManager?.sourceRangeMap || {}
+          engineCommandManager.sourceRangeMap || {}
         ).filter(([_, sourceRange]) => {
           return isOverlap(sourceRange, range)
         })
@@ -186,7 +185,7 @@ export const TextEditor = ({
       })
       .filter(Boolean) as any
 
-    engineCommandManager?.cusorsSelected({
+    engineCommandManager.cusorsSelected({
       otherSelections: [],
       idBasedSelections,
     })

src/components/Toolbar/EqualAngle.tsx

@@ -12,6 +12,8 @@ import {
   getTransformInfos,
 } from '../../lang/std/sketchcombos'
 import { updateCursors } from '../../lang/util'
+import { ActionIcon } from 'components/ActionIcon'
+import { sketchButtonClassnames } from 'Toolbar'
 
 export const EqualAngle = () => {
   const { guiMode, selectionRanges, ast, programMemory, updateAst, setCursor } =
@@ -87,9 +89,17 @@ export const EqualAngle = () => {
         })
       }}
       disabled={!enableEqual}
-      title="yo dawg"
+      title="Parallel (or equal angle)"
+      className="group"
     >
-      parallel
+      <ActionIcon
+        icon="parallel"
+        className="!p-0.5"
+        bgClassName={sketchButtonClassnames.background}
+        iconClassName={sketchButtonClassnames.icon}
+        size="md"
+      />
+      Parallel
     </button>
   )
 }

src/components/Toolbar/EqualLength.tsx

@@ -12,6 +12,8 @@ import {
   getTransformInfos,
 } from '../../lang/std/sketchcombos'
 import { updateCursors } from '../../lang/util'
+import { ActionIcon } from 'components/ActionIcon'
+import { sketchButtonClassnames } from 'Toolbar'
 
 export const EqualLength = () => {
   const { guiMode, selectionRanges, ast, programMemory, updateAst, setCursor } =
@@ -87,9 +89,17 @@ export const EqualLength = () => {
         })
       }}
       disabled={!enableEqual}
-      title="yo dawg"
+      className="group"
+      title="Equal Length"
     >
-      EqualLength
+      <ActionIcon
+        icon="equal"
+        className="!p-0.5"
+        bgClassName={sketchButtonClassnames.background}
+        iconClassName={sketchButtonClassnames.icon}
+        size="md"
+      />
+      Equal Length
     </button>
   )
 }

src/components/Toolbar/HorzVert.tsx

@@ -11,6 +11,8 @@ import {
   transformAstSketchLines,
 } from '../../lang/std/sketchcombos'
 import { updateCursors } from '../../lang/util'
+import { ActionIcon } from 'components/ActionIcon'
+import { sketchButtonClassnames } from 'Toolbar'
 
 export const HorzVert = ({
   horOrVert,
@@ -66,9 +68,17 @@ export const HorzVert = ({
         })
       }}
       disabled={!enableHorz}
-      title="yo dawg"
+      className="group"
+      title={horOrVert === 'horizontal' ? 'Horizontal' : 'Vertical'}
     >
-      {horOrVert === 'horizontal' ? 'Horz' : 'Vert'}
+      <ActionIcon
+        icon={horOrVert === 'horizontal' ? 'horizontal' : 'vertical'}
+        className="!p-0.5"
+        bgClassName={sketchButtonClassnames.background}
+        iconClassName={sketchButtonClassnames.icon}
+        size="md"
+      />
+      {horOrVert === 'horizontal' ? 'Horizontal' : 'Vertical'}
     </button>
   )
 }

src/components/Toolbar/Intersect.tsx

@@ -188,8 +188,9 @@ export const Intersect = () => {
         }
       }}
       disabled={!enable}
+      title="Set Perpendicular Distance"
     >
-      perpendicularDistance
+      Set Perpendicular Distance
     </button>
   )
 }

src/components/Toolbar/RemoveConstrainingValues.tsx

@@ -70,9 +70,9 @@ export const RemoveConstrainingValues = () => {
         })
       }}
       disabled={!enableHorz}
-      title="yo dawg"
+      title="Remove Constraining Values"
     >
-      RemoveConstrainingValues
+      Remove Constraining Values
     </button>
   )
 }

src/components/Toolbar/SetAbsDistance.tsx

@@ -22,11 +22,16 @@ import { updateCursors } from '../../lang/util'
 
 const getModalInfo = create(SetAngleLengthModal as any)
 
-export const SetAbsDistance = ({
-  buttonType,
-}: {
-  buttonType: 'xAbs' | 'yAbs' | 'snapToYAxis' | 'snapToXAxis'
-}) => {
+type ButtonType = 'xAbs' | 'yAbs' | 'snapToYAxis' | 'snapToXAxis'
+
+const buttonLabels: Record<ButtonType, string> = {
+  xAbs: 'Set distance from X Axis',
+  yAbs: 'Set distance from Y Axis',
+  snapToYAxis: 'Snap To Y Axis',
+  snapToXAxis: 'Snap To X Axis',
+}
+
+export const SetAbsDistance = ({ buttonType }: { buttonType: ButtonType }) => {
   const { guiMode, selectionRanges, ast, programMemory, updateAst, setCursor } =
     useStore((s) => ({
       guiMode: s.guiMode,
@@ -128,12 +133,13 @@ export const SetAbsDistance = ({
             callBack: updateCursors(setCursor, selectionRanges, pathToNodeMap),
           })
         } catch (e) {
-          console.log('e', e)
+          console.log('error', e)
         }
       }}
       disabled={!enableAngLen}
+      title={buttonLabels[buttonType]}
     >
-      {buttonType}
+      {buttonLabels[buttonType]}
     </button>
   )
 }

src/components/Toolbar/SetAngleBetween.tsx

@@ -147,8 +147,9 @@ export const SetAngleBetween = () => {
         }
       }}
       disabled={!enable}
+      title="Set Angle Between"
     >
-      angleBetween
+      Set Angle Between
     </button>
   )
 }

src/components/Toolbar/SetHorzVertDistance.tsx

@@ -21,17 +21,28 @@ import { GetInfoModal } from '../SetHorVertDistanceModal'
 import { createLiteral, createVariableDeclaration } from '../../lang/modifyAst'
 import { removeDoubleNegatives } from '../AvailableVarsHelpers'
 import { updateCursors } from '../../lang/util'
+import { ActionIcon } from 'components/ActionIcon'
+import { sketchButtonClassnames } from 'Toolbar'
 
 const getModalInfo = create(GetInfoModal as any)
 
+type ButtonType =
+  | 'setHorzDistance'
+  | 'setVertDistance'
+  | 'alignEndsHorizontally'
+  | 'alignEndsVertically'
+
+const buttonLabels: Record<ButtonType, string> = {
+  setHorzDistance: 'Set Horizontal Distance',
+  setVertDistance: 'Set Vertical Distance',
+  alignEndsHorizontally: 'Align Ends Horizontally',
+  alignEndsVertically: 'Align Ends Vertically',
+}
+
 export const SetHorzVertDistance = ({
   buttonType,
 }: {
-  buttonType:
-    | 'setHorzDistance'
-    | 'setVertDistance'
-    | 'alignEndsHorizontally'
-    | 'alignEndsVertically'
+  buttonType: ButtonType
 }) => {
   const { guiMode, selectionRanges, ast, programMemory, updateAst, setCursor } =
     useStore((s) => ({
@@ -169,8 +180,9 @@ export const SetHorzVertDistance = ({
         }
       }}
       disabled={!enable}
+      title={buttonLabels[buttonType]}
     >
-      {buttonType}
+      {buttonLabels[buttonType]}
     </button>
   )
 }

src/components/Toolbar/setAngleLength.tsx

@@ -23,10 +23,17 @@ import { updateCursors } from '../../lang/util'
 
 const getModalInfo = create(SetAngleLengthModal as any)
 
+type ButtonType = 'setAngle' | 'setLength'
+
+const buttonLabels: Record<ButtonType, string> = {
+  setAngle: 'Set Angle',
+  setLength: 'Set Length',
+}
+
 export const SetAngleLength = ({
   angleOrLength,
 }: {
-  angleOrLength: 'setAngle' | 'setLength'
+  angleOrLength: ButtonType
 }) => {
   const { guiMode, selectionRanges, ast, programMemory, updateAst, setCursor } =
     useStore((s) => ({
@@ -140,12 +147,13 @@ export const SetAngleLength = ({
             callBack: updateCursors(setCursor, selectionRanges, pathToNodeMap),
           })
         } catch (e) {
-          console.log('e', e)
+          console.log('erorr', e)
         }
       }}
       disabled={!enableAngLen}
+      title={buttonLabels[angleOrLength]}
     >
-      {angleOrLength}
+      {buttonLabels[angleOrLength]}
     </button>
   )
 }

src/components/UserSidebarMenu.tsx

@@ -2,7 +2,7 @@ import { Popover, Transition } from '@headlessui/react'
 import { ActionButton } from './ActionButton'
 import { faBars, faGear, faSignOutAlt } from '@fortawesome/free-solid-svg-icons'
 import { faGithub } from '@fortawesome/free-brands-svg-icons'
-import { useNavigate } from 'react-router-dom'
+import { useLocation, useNavigate } from 'react-router-dom'
 import { Fragment, useState } from 'react'
 import { paths } from '../Router'
 import makeUrlPathRelative from '../lib/makeUrlPathRelative'
@@ -12,6 +12,7 @@ import { useGlobalStateContext } from 'hooks/useGlobalStateContext'
 type User = Models['User_type']
 
 const UserSidebarMenu = ({ user }: { user?: User }) => {
+  const location = useLocation()
   const displayedName = getDisplayName(user)
   const [imageLoadFailed, setImageLoadFailed] = useState(false)
   const navigate = useNavigate()
@@ -38,7 +39,7 @@ const UserSidebarMenu = ({ user }: { user?: User }) => {
     <Popover className="relative">
       {user?.image && !imageLoadFailed ? (
         <Popover.Button
-          className="border-0 rounded-full w-fit p-0 focus:outline-none group"
+          className="border-0 rounded-full w-fit min-w-max p-0 focus:outline-none group"
           data-testid="user-sidebar-toggle"
         >
           <div className="rounded-full border border-chalkboard-70/50 hover:border-liquid-50 group-focus:border-liquid-50 overflow-hidden">
@@ -126,7 +127,11 @@ const UserSidebarMenu = ({ user }: { user?: User }) => {
                     // since /settings is a nested route the sidebar doesn't close
                     // automatically when navigating to it
                     close()
-                    navigate(makeUrlPathRelative(paths.SETTINGS))
+                    navigate(
+                      (location.pathname.endsWith('/')
+                        ? location.pathname.slice(0, -1)
+                        : location.pathname) + paths.SETTINGS
+                    )
                   }}
                 >
                   Settings

src/editor/lsp/client.ts

@@ -109,7 +109,6 @@ export default class Client extends jsrpc.JSONRPCServerAndClient {
         }
       }
       messageString += message
-      // console.log(messageString)
       return
     })
 

src/editor/lsp/plugin.ts

@@ -13,6 +13,7 @@ import {
   CompletionItemKind,
   CompletionTriggerKind,
 } from 'vscode-languageserver-protocol'
+import debounce from 'debounce-promise'
 
 import type {
   Completion,
@@ -53,14 +54,11 @@ export class LanguageServerPlugin implements PluginValue {
   private languageId: string
   private documentVersion: number
 
-  private changesTimeout: number
-
   constructor(private view: EditorView, private allowHTMLContent: boolean) {
     this.client = this.view.state.facet(client)
     this.documentUri = this.view.state.facet(documentUri)
     this.languageId = this.view.state.facet(languageId)
     this.documentVersion = 0
-    this.changesTimeout = 0
 
     this.client.attachPlugin(this)
 
@@ -71,12 +69,10 @@ export class LanguageServerPlugin implements PluginValue {
 
   update({ docChanged }: ViewUpdate) {
     if (!docChanged) return
-    if (this.changesTimeout) clearTimeout(this.changesTimeout)
-    this.changesTimeout = window.setTimeout(() => {
-      this.sendChange({
-        documentText: this.view.state.doc.toString(),
-      })
-    }, changesDelay)
+
+    this.sendChange({
+      documentText: this.view.state.doc.toString(),
+    })
   }
 
   destroy() {
@@ -99,14 +95,32 @@ export class LanguageServerPlugin implements PluginValue {
 
   async sendChange({ documentText }: { documentText: string }) {
     if (!this.client.ready) return
+
+    if (documentText.length > 5000) {
+      // Clear out the text it thinks we have, large documents will throw a stack error.
+      // This is obviously not a good fix but it works for now til we figure
+      // out the stack limits in wasm and also rewrite the parser.
+      // Since this is only for hover and completions it will be fine,
+      // completions will still work for stdlib but hover will not.
+      // That seems like a fine trade-off for a working editor for the time
+      // being.
+      documentText = ''
+    }
+
     try {
-      await this.client.textDocumentDidChange({
-        textDocument: {
-          uri: this.documentUri,
-          version: this.documentVersion++,
+      debounce(
+        () => {
+          return this.client.textDocumentDidChange({
+            textDocument: {
+              uri: this.documentUri,
+              version: this.documentVersion++,
+            },
+            contentChanges: [{ text: documentText }],
+          })
         },
-        contentChanges: [{ text: documentText }],
-      })
+        changesDelay,
+        { leading: true }
+      )
     } catch (e) {
       console.error(e)
     }

src/editor/lsp/server.ts

@@ -5,8 +5,6 @@ import init, {
 } from '../../wasm-lib/pkg/wasm_lib'
 import { FromServer, IntoServer } from './codec'
 
-let server: null | Server
-
 export default class Server {
   readonly initOutput: InitOutput
   readonly #intoServer: IntoServer
@@ -26,12 +24,8 @@ export default class Server {
     intoServer: IntoServer,
     fromServer: FromServer
   ): Promise<Server> {
-    if (null == server) {
-      const initOutput = await init()
-      server = new Server(initOutput, intoServer, fromServer)
-    } else {
-      console.warn('Server already initialized; ignoring')
-    }
+    const initOutput = await init()
+    const server = new Server(initOutput, intoServer, fromServer)
     return server
   }
 

src/hooks/useAppMode.ts

@@ -8,6 +8,7 @@ import { ArtifactMap, EngineCommandManager } from 'lang/std/engineConnection'
 import { Models } from '@kittycad/lib/dist/types/src'
 import { isReducedMotion } from 'lang/util'
 import { isOverlap } from 'lib/utils'
+import { engineCommandManager } from '../lang/std/engineConnection'
 
 interface DefaultPlanes {
   xy: string
@@ -17,19 +18,13 @@ interface DefaultPlanes {
 }
 
 export function useAppMode() {
-  const {
-    guiMode,
-    setGuiMode,
-    selectionRanges,
-    engineCommandManager,
-    selectionRangeTypeMap,
-  } = useStore((s) => ({
-    guiMode: s.guiMode,
-    setGuiMode: s.setGuiMode,
-    selectionRanges: s.selectionRanges,
-    engineCommandManager: s.engineCommandManager,
-    selectionRangeTypeMap: s.selectionRangeTypeMap,
-  }))
+  const { guiMode, setGuiMode, selectionRanges, selectionRangeTypeMap } =
+    useStore((s) => ({
+      guiMode: s.guiMode,
+      setGuiMode: s.setGuiMode,
+      selectionRanges: s.selectionRanges,
+      selectionRangeTypeMap: s.selectionRangeTypeMap,
+    }))
   const [defaultPlanes, setDefaultPlanes] = useState<DefaultPlanes | null>(null)
   useEffect(() => {
     if (
@@ -37,27 +32,62 @@ export function useAppMode() {
       guiMode.sketchMode === 'selectFace' &&
       engineCommandManager
     ) {
-      if (!defaultPlanes) {
-        const xy = createPlane(engineCommandManager, {
-          x_axis: { x: 1, y: 0, z: 0 },
-          y_axis: { x: 0, y: 1, z: 0 },
-          color: { r: 0.7, g: 0.28, b: 0.28, a: 0.4 },
-        })
-        // TODO re-enable
-        // const yz = createPlane(engineCommandManager, {
-        //   x_axis: { x: 0, y: 1, z: 0 },
-        //   y_axis: { x: 0, y: 0, z: 1 },
-        //   color: { r: 0.28, g: 0.7, b: 0.28, a: 0.4 },
-        // })
-        // const xz = createPlane(engineCommandManager, {
-        //   x_axis: { x: 1, y: 0, z: 0 },
-        //   y_axis: { x: 0, y: 0, z: 1 },
-        //   color: { r: 0.28, g: 0.28, b: 0.7, a: 0.4 },
-        // })
-        setDefaultPlanes({ xy })
-      } else {
-        setDefaultPlanesHidden(engineCommandManager, defaultPlanes, false)
+      const createAndShowPlanes = async () => {
+        let localDefaultPlanes: DefaultPlanes
+        if (!defaultPlanes) {
+          localDefaultPlanes = await initDefaultPlanes(engineCommandManager)
+          setDefaultPlanes(localDefaultPlanes)
+        } else {
+          localDefaultPlanes = defaultPlanes
+        }
+        setDefaultPlanesHidden(engineCommandManager, localDefaultPlanes, false)
       }
+      createAndShowPlanes()
+    }
+    if (
+      guiMode.mode === 'sketch' &&
+      guiMode.sketchMode === 'enterSketchEdit' &&
+      engineCommandManager
+    ) {
+      const enableSketchMode = async () => {
+        let localDefaultPlanes: DefaultPlanes
+        if (!defaultPlanes) {
+          localDefaultPlanes = await initDefaultPlanes(engineCommandManager)
+          setDefaultPlanes(localDefaultPlanes)
+        } else {
+          localDefaultPlanes = defaultPlanes
+        }
+        setDefaultPlanesHidden(engineCommandManager, localDefaultPlanes, true)
+        // TODO figure out the plane to use based on the sketch
+        // maybe it's easier to make a new plane than rely on the defaults
+        await engineCommandManager.sendSceneCommand({
+          type: 'modeling_cmd_req',
+          cmd_id: uuidv4(),
+          cmd: {
+            type: 'sketch_mode_enable',
+            plane_id: localDefaultPlanes.xy,
+            ortho: true,
+            animated: !isReducedMotion(),
+          },
+        })
+        const proms: any[] = []
+        proms.push(
+          engineCommandManager.sendSceneCommand({
+            type: 'modeling_cmd_req',
+            cmd_id: uuidv4(),
+            cmd: {
+              type: 'edit_mode_enter',
+              target: guiMode.pathId,
+            },
+          })
+        )
+        await Promise.all(proms)
+      }
+      enableSketchMode()
+      setGuiMode({
+        ...guiMode,
+        sketchMode: 'sketchEdit',
+      })
     }
     if (guiMode.mode !== 'sketch' && defaultPlanes) {
       setDefaultPlanesHidden(engineCommandManager, defaultPlanes, true)
@@ -100,7 +130,7 @@ export function useAppMode() {
   ])
 
   useEffect(() => {
-    const unSub = engineCommandManager?.subscribeTo({
+    const unSub = engineCommandManager.subscribeTo({
       event: 'select_with_point',
       callback: async ({ data }) => {
         if (!data.entity_id) return
@@ -109,18 +139,16 @@ export function useAppMode() {
           // user clicked something else in the scene
           return
         }
-        const sketchModeResponse = await engineCommandManager?.sendSceneCommand(
-          {
-            type: 'modeling_cmd_req',
-            cmd_id: uuidv4(),
-            cmd: {
-              type: 'sketch_mode_enable',
-              plane_id: data.entity_id,
-              ortho: true,
-              animated: !isReducedMotion(),
-            },
-          }
-        )
+        const sketchModeResponse = await engineCommandManager.sendSceneCommand({
+          type: 'modeling_cmd_req',
+          cmd_id: uuidv4(),
+          cmd: {
+            type: 'sketch_mode_enable',
+            plane_id: data.entity_id,
+            ortho: true,
+            animated: !isReducedMotion(),
+          },
+        })
         setDefaultPlanesHidden(engineCommandManager, defaultPlanes, true)
         const sketchUuid = uuidv4()
         const proms: any[] = []
@@ -143,14 +171,14 @@ export function useAppMode() {
             },
           })
         )
-        const res = await Promise.all(proms)
-        console.log('res', res)
+        await Promise.all(proms)
         setGuiMode({
           mode: 'sketch',
           sketchMode: 'sketchEdit',
           rotation: [0, 0, 0, 1],
           position: [0, 0, 0],
           pathToNode: [],
+          pathId: sketchUuid,
         })
 
         console.log('sketchModeResponse', sketchModeResponse)
@@ -160,7 +188,7 @@ export function useAppMode() {
   }, [engineCommandManager, defaultPlanes])
 }
 
-function createPlane(
+async function createPlane(
   engineCommandManager: EngineCommandManager,
   {
     x_axis,
@@ -173,7 +201,7 @@ function createPlane(
   }
 ) {
   const planeId = uuidv4()
-  engineCommandManager?.sendSceneCommand({
+  await engineCommandManager.sendSceneCommand({
     type: 'modeling_cmd_req',
     cmd: {
       type: 'make_plane',
@@ -185,7 +213,7 @@ function createPlane(
     },
     cmd_id: planeId,
   })
-  engineCommandManager?.sendSceneCommand({
+  await engineCommandManager.sendSceneCommand({
     type: 'modeling_cmd_req',
     cmd: {
       type: 'plane_set_color',
@@ -198,12 +226,12 @@ function createPlane(
 }
 
 function setDefaultPlanesHidden(
-  engineCommandManager: EngineCommandManager | undefined,
+  engineCommandManager: EngineCommandManager,
   defaultPlanes: DefaultPlanes,
   hidden: boolean
 ) {
   Object.values(defaultPlanes).forEach((planeId) => {
-    engineCommandManager?.sendSceneCommand({
+    engineCommandManager.sendSceneCommand({
       type: 'modeling_cmd_req',
       cmd_id: uuidv4(),
       cmd: {
@@ -215,6 +243,28 @@ function setDefaultPlanesHidden(
   })
 }
 
+async function initDefaultPlanes(
+  engineCommandManager: EngineCommandManager
+): Promise<DefaultPlanes> {
+  const xy = await createPlane(engineCommandManager, {
+    x_axis: { x: 1, y: 0, z: 0 },
+    y_axis: { x: 0, y: 1, z: 0 },
+    color: { r: 0.7, g: 0.28, b: 0.28, a: 0.4 },
+  })
+  // TODO re-enable
+  // const yz = createPlane(engineCommandManager, {
+  //   x_axis: { x: 0, y: 1, z: 0 },
+  //   y_axis: { x: 0, y: 0, z: 1 },
+  //   color: { r: 0.28, g: 0.7, b: 0.28, a: 0.4 },
+  // })
+  // const xz = createPlane(engineCommandManager, {
+  //   x_axis: { x: 1, y: 0, z: 0 },
+  //   y_axis: { x: 0, y: 0, z: 1 },
+  //   color: { r: 0.28, g: 0.28, b: 0.7, a: 0.4 },
+  // })
+  return { xy }
+}
+
 function isCursorInSketchCommandRange(
   artifactMap: ArtifactMap,
   selectionRanges: Selections

src/hooks/useDotDotSlash.ts

@@ -0,0 +1,13 @@
+import { useLocation } from 'react-router-dom'
+
+export function useDotDotSlash(): (count?: number) => string {
+  const location = useLocation()
+  const dotDotSlash = (count = 1): string => {
+    // since we can't use relative paths (../) for windows
+    if (location.pathname === '/') return ''
+    const path = location.pathname.slice(0, location.pathname.lastIndexOf('/'))
+    if (count <= 1) return path
+    return dotDotSlash(count - 1)
+  }
+  return dotDotSlash
+}

src/hooks/useEngineConnectionSubscriptions.ts

@@ -1,14 +1,9 @@
 import { useEffect } from 'react'
 import { useStore } from 'useStore'
+import { engineCommandManager } from '../lang/std/engineConnection'
 
 export function useEngineConnectionSubscriptions() {
-  const {
-    engineCommandManager,
-    setCursor2,
-    setHighlightRange,
-    highlightRange,
-  } = useStore((s) => ({
-    engineCommandManager: s.engineCommandManager,
+  const { setCursor2, setHighlightRange, highlightRange } = useStore((s) => ({
     setCursor2: s.setCursor2,
     setHighlightRange: s.setHighlightRange,
     highlightRange: s.highlightRange,

src/hooks/useSetupEngineManager.ts

@@ -1,53 +1,90 @@
-import { useLayoutEffect } from 'react'
+import { useLayoutEffect, useEffect, useRef } from 'react'
 import { _executor } from '../lang/executor'
 import { useStore } from '../useStore'
-import { EngineCommandManager } from '../lang/std/engineConnection'
+import { engineCommandManager } from '../lang/std/engineConnection'
+import { deferExecution } from 'lib/utils'
 
 export function useSetupEngineManager(
   streamRef: React.RefObject<HTMLDivElement>,
   token?: string
 ) {
   const {
-    setEngineCommandManager,
     setMediaStream,
     setIsStreamReady,
     setStreamDimensions,
     executeCode,
+    streamDimensions,
   } = useStore((s) => ({
-    setEngineCommandManager: s.setEngineCommandManager,
     setMediaStream: s.setMediaStream,
     setIsStreamReady: s.setIsStreamReady,
     setStreamDimensions: s.setStreamDimensions,
     executeCode: s.executeCode,
+    streamDimensions: s.streamDimensions,
   }))
 
   const streamWidth = streamRef?.current?.offsetWidth
   const streamHeight = streamRef?.current?.offsetHeight
 
+  const hasSetNonZeroDimensions = useRef<boolean>(false)
+
+  useLayoutEffect(() => {
+    // Load the engine command manager once with the initial width and height,
+    // then we do not want to reload it.
+    const { width: quadWidth, height: quadHeight } = getDimensions(
+      streamWidth,
+      streamHeight
+    )
+    if (!hasSetNonZeroDimensions.current && quadHeight && quadWidth) {
+      engineCommandManager.start({
+        setMediaStream,
+        setIsStreamReady,
+        width: quadWidth,
+        height: quadHeight,
+        token,
+      })
+      engineCommandManager.waitForReady.then(() => {
+        executeCode()
+      })
+      setStreamDimensions({
+        streamWidth: quadWidth,
+        streamHeight: quadHeight,
+      })
+      hasSetNonZeroDimensions.current = true
+    }
+  }, [streamRef?.current?.offsetWidth, streamRef?.current?.offsetHeight])
+
+  useEffect(() => {
+    const handleResize = deferExecution(() => {
+      const { width, height } = getDimensions(
+        streamRef?.current?.offsetWidth,
+        streamRef?.current?.offsetHeight
+      )
+      if (
+        streamDimensions.streamWidth !== width ||
+        streamDimensions.streamHeight !== height
+      ) {
+        engineCommandManager.handleResize({
+          streamWidth: width,
+          streamHeight: height,
+        })
+        setStreamDimensions({
+          streamWidth: width,
+          streamHeight: height,
+        })
+      }
+    }, 500)
+
+    window.addEventListener('resize', handleResize)
+    return () => {
+      window.removeEventListener('resize', handleResize)
+    }
+  }, [])
+}
+
+function getDimensions(streamWidth?: number, streamHeight?: number) {
   const width = streamWidth ? streamWidth : 0
   const quadWidth = Math.round(width / 4) * 4
   const height = streamHeight ? streamHeight : 0
   const quadHeight = Math.round(height / 4) * 4
-
-  useLayoutEffect(() => {
-    setStreamDimensions({
-      streamWidth: quadWidth,
-      streamHeight: quadHeight,
-    })
-    if (!width || !height) return
-    const eng = new EngineCommandManager({
-      setMediaStream,
-      setIsStreamReady,
-      width: quadWidth,
-      height: quadHeight,
-      token,
-    })
-    setEngineCommandManager(eng)
-    eng.waitForReady.then(() => {
-      executeCode()
-    })
-    return () => {
-      eng?.tearDown()
-    }
-  }, [quadWidth, quadHeight])
+  return { width: quadWidth, height: quadHeight }
 }

src/hooks/useToolbarGuards.ts

@@ -48,7 +48,7 @@ export function useConvertToVariable() {
 
       updateAst(_modifiedAst, true)
     } catch (e) {
-      console.log('e', e)
+      console.log('error', e)
     }
   }
 

src/index.css

@@ -31,6 +31,14 @@ body.dark {
   @apply text-chalkboard-10;
 }
 
+select {
+  @apply bg-chalkboard-20;
+}
+
+.dark select {
+  @apply bg-chalkboard-90;
+}
+
 ::-webkit-scrollbar {
   @apply w-2 h-2 rounded-sm;
   @apply bg-chalkboard-20;

src/lang/abstractSyntaxTree.test.ts

@@ -139,54 +139,6 @@ const newVar = myVar + 1
       },
     ])
   })
-  test('using std function "log"', () => {
-    const code = `log(5, "hello", aIdentifier)`
-    const { body } = parser_wasm(code)
-    expect(body).toEqual([
-      {
-        type: 'ExpressionStatement',
-        start: 0,
-        end: 28,
-        expression: {
-          type: 'CallExpression',
-          start: 0,
-          end: 28,
-          callee: {
-            type: 'Identifier',
-            start: 0,
-            end: 3,
-            name: 'log',
-          },
-          arguments: [
-            {
-              type: 'Literal',
-              start: 4,
-              end: 5,
-              value: 5,
-              raw: '5',
-            },
-            {
-              type: 'Literal',
-              start: 7,
-              end: 14,
-              value: 'hello',
-              raw: '"hello"',
-            },
-            {
-              type: 'Identifier',
-              start: 16,
-              end: 27,
-              name: 'aIdentifier',
-            },
-          ],
-          function: {
-            type: 'InMemory',
-          },
-          optional: false,
-        },
-      },
-    ])
-  })
 })
 
 describe('testing function declaration', () => {
@@ -1560,7 +1512,7 @@ const yo = { a: { b: { c: '123' } } }
 // this is a comment
 const key = 'c'`
     const nonCodeMetaInstance = {
-      type: 'NoneCodeNode',
+      type: 'NonCodeNode',
       start: code.indexOf('\n// this is a comment'),
       end: code.indexOf('const key'),
       value: {
@@ -1569,17 +1521,17 @@ const key = 'c'`
       },
     }
     const { nonCodeMeta } = parser_wasm(code)
-    expect(nonCodeMeta.noneCodeNodes[0]).toEqual(nonCodeMetaInstance)
+    expect(nonCodeMeta.nonCodeNodes[0]).toEqual(nonCodeMetaInstance)
 
     // extra whitespace won't change it's position (0) or value (NB the start end would have changed though)
     const codeWithExtraStartWhitespace = '\n\n\n' + code
     const { nonCodeMeta: nonCodeMeta2 } = parser_wasm(
       codeWithExtraStartWhitespace
     )
-    expect(nonCodeMeta2.noneCodeNodes[0].value).toStrictEqual(
+    expect(nonCodeMeta2.nonCodeNodes[0].value).toStrictEqual(
       nonCodeMetaInstance.value
     )
-    expect(nonCodeMeta2.noneCodeNodes[0].start).not.toBe(
+    expect(nonCodeMeta2.nonCodeNodes[0].start).not.toBe(
       nonCodeMetaInstance.start
     )
   })
@@ -1596,9 +1548,9 @@ const key = 'c'`
     const { body } = parser_wasm(code)
     const indexOfSecondLineToExpression = 2
     const sketchNonCodeMeta = (body as any)[0].declarations[0].init.nonCodeMeta
-      .noneCodeNodes
+      .nonCodeNodes
     expect(sketchNonCodeMeta[indexOfSecondLineToExpression]).toEqual({
-      type: 'NoneCodeNode',
+      type: 'NonCodeNode',
       start: 106,
       end: 166,
       value: {
@@ -1619,9 +1571,9 @@ const key = 'c'`
 
     const { body } = parser_wasm(code)
     const sketchNonCodeMeta = (body[0] as any).declarations[0].init.nonCodeMeta
-      .noneCodeNodes
+      .nonCodeNodes
     expect(sketchNonCodeMeta[3]).toEqual({
-      type: 'NoneCodeNode',
+      type: 'NonCodeNode',
       start: 125,
       end: 141,
       value: {
@@ -1739,7 +1691,6 @@ describe('parsing errors', () => {
     let _theError
     try {
       const result = expect(parser_wasm(code))
-      console.log('result', result)
     } catch (e) {
       _theError = e
     }

src/lang/abstractSyntaxTreeTypes.ts

@@ -33,5 +33,5 @@ export type SyntaxType =
   | 'PipeExpression'
   | 'PipeSubstitution'
   | 'Literal'
-  | 'NoneCodeNode'
+  | 'NonCodeNode'
   | 'UnaryExpression'

src/lang/getNodePathFromSourceRange.test.ts

@@ -1,6 +1,7 @@
 import { getNodePathFromSourceRange, getNodeFromPath } from './queryAst'
 import { parser_wasm } from './abstractSyntaxTree'
 import { initPromise } from './rust'
+import { Identifier } from './abstractSyntaxTreeTypes'
 
 beforeAll(() => initPromise)
 
@@ -27,4 +28,81 @@ const sk3 = startSketchAt([0, 0])
     expect([node.start, node.end]).toEqual(sourceRange)
     expect(node.type).toBe('CallExpression')
   })
+  it('gets path right for function definition params', () => {
+    const code = `fn cube = (pos, scale) => {
+  const sg = startSketchAt(pos)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+
+  return sg
+}
+
+const b1 = cube([0,0], 10)`
+    const subStr = 'pos, scale'
+    const subStrIndex = code.indexOf(subStr)
+    const sourceRange: [number, number] = [
+      subStrIndex,
+      subStrIndex + 'pos'.length,
+    ]
+
+    const ast = parser_wasm(code)
+    const nodePath = getNodePathFromSourceRange(ast, sourceRange)
+    const node = getNodeFromPath<Identifier>(ast, nodePath).node
+
+    expect(nodePath).toEqual([
+      ['body', ''],
+      [0, 'index'],
+      ['declarations', 'VariableDeclaration'],
+      [0, 'index'],
+      ['init', ''],
+      ['params', 'FunctionExpression'],
+      [0, 'index'],
+    ])
+    expect(node.type).toBe('Identifier')
+    expect(node.name).toBe('pos')
+  })
+  it('gets path right for deep within function definition body', () => {
+    const code = `fn cube = (pos, scale) => {
+  const sg = startSketchAt(pos)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+
+  return sg
+}
+
+const b1 = cube([0,0], 10)`
+    const subStr = 'scale, 0'
+    const subStrIndex = code.indexOf(subStr)
+    const sourceRange: [number, number] = [
+      subStrIndex,
+      subStrIndex + 'scale'.length,
+    ]
+
+    const ast = parser_wasm(code)
+    const nodePath = getNodePathFromSourceRange(ast, sourceRange)
+    const node = getNodeFromPath<Identifier>(ast, nodePath).node
+    expect(nodePath).toEqual([
+      ['body', ''],
+      [0, 'index'],
+      ['declarations', 'VariableDeclaration'],
+      [0, 'index'],
+      ['init', ''],
+      ['body', 'FunctionExpression'],
+      ['body', 'FunctionExpression'],
+      [0, 'index'],
+      ['declarations', 'VariableDeclaration'],
+      [0, 'index'],
+      ['init', ''],
+      ['body', 'PipeExpression'],
+      [2, 'index'],
+      ['arguments', 'CallExpression'],
+      [0, 'index'],
+      ['elements', 'ArrayExpression'],
+      [0, 'index'],
+    ])
+    expect(node.type).toBe('Identifier')
+    expect(node.name).toBe('scale')
+  })
 })

src/lang/modifyAst.test.ts

@@ -106,7 +106,7 @@ describe('Testing addSketchTo', () => {
         body: [],
         start: 0,
         end: 0,
-        nonCodeMeta: { noneCodeNodes: {}, start: null },
+        nonCodeMeta: { nonCodeNodes: {}, start: null },
       },
       'yz'
     )

src/lang/modifyAst.ts

@@ -321,7 +321,7 @@ export function extrudeSketch(
     [0, 'index'],
   ]
   return {
-    modifiedAst: addToShow(_node, name),
+    modifiedAst: node,
     pathToNode: [...pathToNode.slice(0, -1), [showCallIndex, 'index']],
     pathToExtrudeArg,
   }
@@ -537,7 +537,7 @@ export function createPipeExpression(
     start: 0,
     end: 0,
     body,
-    nonCodeMeta: { noneCodeNodes: {}, start: null },
+    nonCodeMeta: { nonCodeNodes: {}, start: null },
   }
 }
 

src/lang/queryAst.ts

@@ -239,7 +239,29 @@ function moreNodePathFromSourceRange(
     }
     return path
   }
-  console.error('not implemented')
+  if (_node.type === 'FunctionExpression' && isInRange) {
+    for (let i = 0; i < _node.params.length; i++) {
+      const param = _node.params[i]
+      if (param.start <= start && param.end >= end) {
+        path.push(['params', 'FunctionExpression'])
+        path.push([i, 'index'])
+        return moreNodePathFromSourceRange(param, sourceRange, path)
+      }
+    }
+    if (_node.body.start <= start && _node.body.end >= end) {
+      path.push(['body', 'FunctionExpression'])
+      const fnBody = _node.body.body
+      for (let i = 0; i < fnBody.length; i++) {
+        const statement = fnBody[i]
+        if (statement.start <= start && statement.end >= end) {
+          path.push(['body', 'FunctionExpression'])
+          path.push([i, 'index'])
+          return moreNodePathFromSourceRange(statement, sourceRange, path)
+        }
+      }
+    }
+  }
+  console.error('not implemented: ' + node.type)
   return path
 }
 

src/lang/recast.ts

@@ -7,7 +7,7 @@ export const recast = (ast: Program): string => {
     return s
   } catch (e) {
     // TODO: do something real with the error.
-    console.log('recast', e)
+    console.log('recast error', e)
     throw e
   }
 }

src/lang/std/engineConnection.ts

@@ -15,9 +15,17 @@ interface CommandInfo {
   range: SourceRange
   parentId?: string
 }
+
+type WebSocketResponse = Models['OkWebSocketResponseData_type']
+
 interface ResultCommand extends CommandInfo {
   type: 'result'
   data: any
+  raw: WebSocketResponse
+}
+interface FailedCommand extends CommandInfo {
+  type: 'failed'
+  errors: Models['FailureWebSocketResponse_type']['errors']
 }
 interface PendingCommand extends CommandInfo {
   type: 'pending'
@@ -26,7 +34,7 @@ interface PendingCommand extends CommandInfo {
 }
 
 export interface ArtifactMap {
-  [key: string]: ResultCommand | PendingCommand
+  [key: string]: ResultCommand | PendingCommand | FailedCommand
 }
 export interface SourceRangeMap {
   [key: string]: SourceRange
@@ -37,7 +45,10 @@ interface NewTrackArgs {
   mediaStream: MediaStream
 }
 
-type WebSocketResponse = Models['OkWebSocketResponseData_type']
+// This looks funny, I know. This is needed because node and the browser
+// disagree as to the type. In a browser it's a number, but in node it's a
+// "Timeout".
+type Timeout = ReturnType<typeof setTimeout>
 
 type ClientMetrics = Models['ClientMetrics_type']
 
@@ -50,6 +61,9 @@ export class EngineConnection {
   unreliableDataChannel?: RTCDataChannel
 
   private ready: boolean
+  private connecting: boolean
+  private dead: boolean
+  private failedConnTimeout: Timeout | null
 
   readonly url: string
   private readonly token?: string
@@ -85,6 +99,9 @@ export class EngineConnection {
     this.url = url
     this.token = token
     this.ready = false
+    this.connecting = false
+    this.dead = false
+    this.failedConnTimeout = null
     this.onWebsocketOpen = onWebsocketOpen
     this.onDataChannelOpen = onDataChannelOpen
     this.onEngineConnectionOpen = onEngineConnectionOpen
@@ -95,7 +112,10 @@ export class EngineConnection {
     // TODO(paultag): This ought to be tweakable.
     const pingIntervalMs = 10000
 
-    setInterval(() => {
+    let pingInterval = setInterval(() => {
+      if (this.dead) {
+        clearInterval(pingInterval)
+      }
       if (this.isReady()) {
         // When we're online, every 10 seconds, we'll attempt to put a 'ping'
         // command through the WebSocket connection. This will help both ends
@@ -104,6 +124,24 @@ export class EngineConnection {
         this.send({ type: 'ping' })
       }
     }, pingIntervalMs)
+
+    const connectionTimeoutMs = VITE_KC_CONNECTION_TIMEOUT_MS
+    let connectInterval = setInterval(() => {
+      if (this.dead) {
+        clearInterval(connectInterval)
+        return
+      }
+      if (this.isReady()) {
+        return
+      }
+      console.log('connecting via retry')
+      this.connect()
+    }, connectionTimeoutMs)
+  }
+  // isConnecting will return true when connect has been called, but the full
+  // WebRTC is not online.
+  isConnecting() {
+    return this.connecting
   }
   // isReady will return true only when the WebRTC *and* WebSocket connection
   // are connected. During setup, the WebSocket connection comes online first,
@@ -112,6 +150,10 @@ export class EngineConnection {
   isReady() {
     return this.ready
   }
+  tearDown() {
+    this.dead = true
+    this.close()
+  }
   // shouldTrace will return true when Sentry should be used to instrument
   // the Engine.
   shouldTrace() {
@@ -123,8 +165,10 @@ export class EngineConnection {
   // This will attempt the full handshake, and retry if the connection
   // did not establish.
   connect() {
-    // TODO(paultag): make this safe to call multiple times, and figure out
-    // when a connection is in progress (state: connecting or something).
+    console.log('connect was called')
+    if (this.isConnecting() || this.isReady()) {
+      return
+    }
 
     // Information on the connect transaction
 
@@ -356,20 +400,6 @@ export class EngineConnection {
           })
         })
       }
-
-      // TODO(paultag): This ought to be both controllable, as well as something
-      // like exponential backoff to have some grace on the backend, as well as
-      // fix responsiveness for clients that had a weird network hiccup.
-      const connectionTimeoutMs = VITE_KC_CONNECTION_TIMEOUT_MS
-
-      setTimeout(() => {
-        if (this.isReady()) {
-          return
-        }
-        console.log('engine connection timeout on connection, retrying')
-        this.close()
-        this.connect()
-      }, connectionTimeoutMs)
     })
 
     this.pc.addEventListener('track', (event) => {
@@ -459,6 +489,7 @@ export class EngineConnection {
 
         this.onEngineConnectionOpen(this)
         this.ready = true
+        this.connecting = false
       })
 
       this.unreliableDataChannel.addEventListener('close', (event) => {
@@ -472,8 +503,31 @@ export class EngineConnection {
       })
     })
 
+    const connectionTimeoutMs = VITE_KC_CONNECTION_TIMEOUT_MS
+
+    if (this.failedConnTimeout) {
+      console.log('clearing timeout before set')
+      clearTimeout(this.failedConnTimeout)
+      this.failedConnTimeout = null
+    }
+    console.log('timeout set')
+    this.failedConnTimeout = setTimeout(() => {
+      if (this.isReady()) {
+        return
+      }
+      console.log('engine connection timeout on connection, closing')
+      this.close()
+    }, connectionTimeoutMs)
+
     this.onConnectionStarted(this)
   }
+  unreliableSend(message: object | string) {
+    // TODO(paultag): Add in logic to determine the connection state and
+    // take actions if needed?
+    this.unreliableDataChannel?.send(
+      typeof message === 'string' ? message : JSON.stringify(message)
+    )
+  }
   send(message: object | string) {
     // TODO(paultag): Add in logic to determine the connection state and
     // take actions if needed?
@@ -489,9 +543,15 @@ export class EngineConnection {
     this.pc = undefined
     this.unreliableDataChannel = undefined
     this.webrtcStatsCollector = undefined
+    if (this.failedConnTimeout) {
+      console.log('closed timeout in close')
+      clearTimeout(this.failedConnTimeout)
+      this.failedConnTimeout = null
+    }
 
     this.onClose(this)
     this.ready = false
+    this.connecting = false
   }
 }
 
@@ -535,7 +595,12 @@ export class EngineCommandManager {
       [localUnsubscribeId: string]: (a: any) => void
     }
   } = {} as any
-  constructor({
+
+  constructor() {
+    this.engineConnection = undefined
+  }
+
+  start({
     setMediaStream,
     setIsStreamReady,
     width,
@@ -548,6 +613,16 @@ export class EngineCommandManager {
     height: number
     token?: string
   }) {
+    if (width === 0 || height === 0) {
+      return
+    }
+
+    // If we already have an engine connection, just need to resize the stream.
+    if (this.engineConnection) {
+      this.handleResize({ streamWidth: width, streamHeight: height })
+      return
+    }
+
     this.waitForReady = new Promise((resolve) => {
       this.resolveReady = resolve
     })
@@ -608,6 +683,8 @@ export class EngineCommandManager {
               message.request_id
             ) {
               this.handleModelingCommand(message.resp, message.request_id)
+            } else if (!message.success && message.request_id) {
+              this.handleFailedModelingCommand(message)
             }
           }
         })
@@ -627,7 +704,35 @@ export class EngineCommandManager {
 
     this.engineConnection?.connect()
   }
+  handleResize({
+    streamWidth,
+    streamHeight,
+  }: {
+    streamWidth: number
+    streamHeight: number
+  }) {
+    console.log('handleResize', streamWidth, streamHeight)
+    if (!this.engineConnection?.isReady()) {
+      return
+    }
+
+    const resizeCmd: EngineCommand = {
+      type: 'modeling_cmd_req',
+      cmd_id: uuidv4(),
+      cmd: {
+        type: 'reconfigure_stream',
+        width: streamWidth,
+        height: streamHeight,
+        fps: 60,
+      },
+    }
+    this.engineConnection?.send(resizeCmd)
+  }
   handleModelingCommand(message: WebSocketResponse, id: string) {
+    if (this.engineConnection === undefined) {
+      return
+    }
+
     if (message.type !== 'modeling') {
       return
     }
@@ -645,12 +750,14 @@ export class EngineCommandManager {
         commandType: command.commandType,
         parentId: command.parentId ? command.parentId : undefined,
         data: modelingResponse,
+        raw: message,
       }
       resolve({
         id,
         commandType: command.commandType,
         range: command.range,
         data: modelingResponse,
+        raw: message,
       })
     } else {
       this.artifactMap[id] = {
@@ -658,11 +765,44 @@ export class EngineCommandManager {
         commandType: command?.commandType,
         range: command?.range,
         data: modelingResponse,
+        raw: message,
+      }
+    }
+  }
+  handleFailedModelingCommand({
+    request_id,
+    errors,
+  }: Models['FailureWebSocketResponse_type']) {
+    const id = request_id
+    if (!id) return
+    const command = this.artifactMap[id]
+    if (command && command.type === 'pending') {
+      const resolve = command.resolve
+      this.artifactMap[id] = {
+        type: 'failed',
+        range: command.range,
+        commandType: command.commandType,
+        parentId: command.parentId ? command.parentId : undefined,
+        errors,
+      }
+      resolve({
+        id,
+        commandType: command.commandType,
+        range: command.range,
+        errors,
+      })
+    } else {
+      this.artifactMap[id] = {
+        type: 'failed',
+        range: command.range,
+        commandType: command.commandType,
+        parentId: command.parentId ? command.parentId : undefined,
+        errors,
       }
     }
   }
   tearDown() {
-    this.engineConnection?.close()
+    this.engineConnection?.tearDown()
   }
   startNewSession() {
     this.artifactMap = {}
@@ -757,6 +897,9 @@ export class EngineCommandManager {
     })
   }
   sendSceneCommand(command: EngineCommand): Promise<any> {
+    if (this.engineConnection === undefined) {
+      return Promise.resolve()
+    }
     if (
       command.type === 'modeling_cmd_req' &&
       command.cmd.type !== lastMessage
@@ -765,7 +908,6 @@ export class EngineCommandManager {
       lastMessage = command.cmd.type
     }
     if (!this.engineConnection?.isReady()) {
-      console.log('socket not ready')
       return Promise.resolve()
     }
     if (command.type !== 'modeling_cmd_req') return Promise.resolve()
@@ -777,9 +919,7 @@ export class EngineCommandManager {
     ) {
       cmd.sequence = this.outSequence
       this.outSequence++
-      this.engineConnection?.unreliableDataChannel?.send(
-        JSON.stringify(command)
-      )
+      this.engineConnection?.unreliableSend(command)
       return Promise.resolve()
     } else if (
       cmd.type === 'highlight_set_entity' &&
@@ -787,9 +927,7 @@ export class EngineCommandManager {
     ) {
       cmd.sequence = this.outSequence
       this.outSequence++
-      this.engineConnection?.unreliableDataChannel?.send(
-        JSON.stringify(command)
-      )
+      this.engineConnection?.unreliableSend(command)
       return Promise.resolve()
     } else if (
       cmd.type === 'mouse_move' &&
@@ -797,9 +935,7 @@ export class EngineCommandManager {
     ) {
       cmd.sequence = this.outSequence
       this.outSequence++
-      this.engineConnection?.unreliableDataChannel?.send(
-        JSON.stringify(command)
-      )
+      this.engineConnection?.unreliableSend(command)
       return Promise.resolve()
     }
     // since it's not mouse drag or highlighting send over TCP and keep track of the command
@@ -815,10 +951,12 @@ export class EngineCommandManager {
     range: SourceRange
     command: EngineCommand | string
   }): Promise<any> {
+    if (this.engineConnection === undefined) {
+      return Promise.resolve()
+    }
     this.sourceRangeMap[id] = range
 
     if (!this.engineConnection?.isReady()) {
-      console.log('socket not ready')
       return Promise.resolve()
     }
     this.engineConnection?.send(command)
@@ -861,6 +999,9 @@ export class EngineCommandManager {
     rangeStr: string,
     commandStr: string
   ): Promise<any> {
+    if (this.engineConnection === undefined) {
+      return Promise.resolve()
+    }
     if (id === undefined) {
       throw new Error('id is undefined')
     }
@@ -872,7 +1013,10 @@ export class EngineCommandManager {
     }
     const range: SourceRange = JSON.parse(rangeStr)
 
-    return this.sendModelingCommand({ id, range, command: commandStr })
+    // We only care about the modeling command response.
+    return this.sendModelingCommand({ id, range, command: commandStr }).then(
+      ({ raw }) => JSON.stringify(raw)
+    )
   }
   commandResult(id: string): Promise<any> {
     const command = this.artifactMap[id]
@@ -881,6 +1025,8 @@ export class EngineCommandManager {
     }
     if (command.type === 'result') {
       return command.data
+    } else if (command.type === 'failed') {
+      return Promise.resolve(command.errors)
     }
     return command.promise
   }
@@ -906,6 +1052,9 @@ export class EngineCommandManager {
     }
   }
   private async fixIdMappings(ast: Program, programMemory: ProgramMemory) {
+    if (this.engineConnection === undefined) {
+      return
+    }
     /* This is a temporary solution since the cmd_ids that are sent through when
     sending 'extend_path' ids are not used as the segment ids.
 
@@ -942,7 +1091,6 @@ export class EngineCommandManager {
     pathInfos.forEach(({ originalId, segments }) => {
       const originalArtifact = this.artifactMap[originalId]
       if (!originalArtifact || originalArtifact.type === 'pending') {
-        console.log('problem')
         return
       }
       const pipeExpPath = getNodePathFromSourceRange(
@@ -955,23 +1103,20 @@ export class EngineCommandManager {
         'VariableDeclarator'
       ).node
       if (pipeExp.type !== 'VariableDeclarator') {
-        console.log('problem', pipeExp, pipeExpPath, ast)
         return
       }
       const variableName = pipeExp.id.name
       const memoryItem = programMemory.root[variableName]
       if (!memoryItem) {
-        console.log('problem', variableName, programMemory)
         return
       } else if (memoryItem.type !== 'SketchGroup') {
-        console.log('problem', memoryItem, programMemory)
         return
       }
+
       const relevantSegments = segments.filter(
         ({ command_id }: { command_id: string | null }) => command_id
       )
       if (memoryItem.value.length !== relevantSegments.length) {
-        console.log('problem', memoryItem.value, relevantSegments)
         return
       }
       for (let i = 0; i < relevantSegments.length; i++) {
@@ -981,9 +1126,13 @@ export class EngineCommandManager {
         const artifact = this.artifactMap[oldId]
         delete this.artifactMap[oldId]
         delete this.sourceRangeMap[oldId]
-        this.artifactMap[engineSegment.command_id] = artifact
-        this.sourceRangeMap[engineSegment.command_id] = artifact.range
+        if (artifact) {
+          this.artifactMap[engineSegment.command_id] = artifact
+          this.sourceRangeMap[engineSegment.command_id] = artifact.range
+        }
       }
     })
   }
 }
+
+export const engineCommandManager = new EngineCommandManager()

src/lang/std/sketch.test.ts

@@ -117,6 +117,7 @@ show(mySketch001)
       {
         mode: 'sketch',
         sketchMode: 'sketchEdit',
+        pathId: '',
         rotation: [0, 0, 0, 1],
         position: [0, 0, 0],
         pathToNode: [

src/lang/std/sketchcombos.ts

@@ -1279,7 +1279,7 @@ export function getTransformInfos(
     }) as TransformInfo[]
     return theTransforms
   } catch (error) {
-    console.log(error)
+    console.log('error', error)
     return []
   }
 }

src/lang/tokeniser.ts

@@ -11,7 +11,7 @@ export async function asyncLexer(str: string): Promise<Token[]> {
     return tokens
   } catch (e) {
     // TODO: do something real with the error.
-    console.log('lexer', e)
+    console.log('lexer error', e)
     throw e
   }
 }
@@ -22,7 +22,7 @@ export function lexer(str: string): Token[] {
     return tokens
   } catch (e) {
     // TODO: do something real with the error.
-    console.log('lexer', e)
+    console.log('lexer error', e)
     throw e
   }
 }

src/lib/exampleKcl.ts

@@ -0,0 +1,21 @@
+export const bracket = `// Material: 6061-T6 Aluminum
+const sigmaAllow = 35000 // psi
+const width = 9 // inch
+const p = 150 // Force on shelf - lbs
+const distance = 6 // inches
+const FOS = 2
+
+const leg1 = 5 // inches
+const leg2 = 8 // inches
+const thickness = sqrt(distance * p * FOS * 6 / sigmaAllow / width) // inches
+const bracket = startSketchAt([0, 0])
+  |> line([0, leg1], %)
+  |> line([leg2, 0], %)
+  |> line([0, -thickness], %)
+  |> line([-leg2 + thickness, 0], %)
+  |> line([0, -leg1 + thickness], %)
+  |> close(%)
+  |> extrude(width, %)
+
+show(bracket)
+`

src/lib/exportSave.ts

@@ -39,6 +39,6 @@ export async function exportSave(data: ArrayBuffer) {
     }
   } catch (e) {
     // TODO: do something real with the error.
-    console.log('export', e)
+    console.log('export error', e)
   }
 }

src/lib/tauriFS.ts

@@ -36,7 +36,7 @@ export async function initializeProjectDirectory(directory: string) {
   try {
     docDirectory = await documentDir()
   } catch (e) {
-    console.log(e)
+    console.log('error', e)
     docDirectory = await homeDir() // seems to work better on Linux
   }
 

src/lib/testHelpers.ts

@@ -5,6 +5,9 @@ import {
   EngineCommand,
 } from '../lang/std/engineConnection'
 import { SourceRange } from 'lang/executor'
+import { Models } from '@kittycad/lib'
+
+type WebSocketResponse = Models['OkWebSocketResponseData_type']
 
 class MockEngineCommandManager {
   constructor(mockParams: {
@@ -23,7 +26,13 @@ class MockEngineCommandManager {
     range: SourceRange
     command: EngineCommand
   }): Promise<any> {
-    return Promise.resolve()
+    const response: WebSocketResponse = {
+      type: 'modeling',
+      data: {
+        modeling_response: { type: 'empty' },
+      },
+    }
+    return Promise.resolve(JSON.stringify(response))
   }
   sendModelingCommandFromWasm(
     id: string,
@@ -66,11 +75,12 @@ export async function executor(
   ast: Program,
   pm: ProgramMemory = { root: {}, return: null }
 ): Promise<ProgramMemory> {
-  const engineCommandManager = new EngineCommandManager({
+  const engineCommandManager = new EngineCommandManager()
+  engineCommandManager.start({
     setIsStreamReady: () => {},
     setMediaStream: () => {},
-    width: 100,
-    height: 100,
+    width: 0,
+    height: 0,
   })
   await engineCommandManager.waitForReady
   engineCommandManager.startNewSession()

src/machines/authMachine.ts

@@ -4,6 +4,7 @@ import withBaseURL from '../lib/withBaseURL'
 import { CommandBarMeta } from '../lib/commands'
 import { isTauri } from 'lib/isTauri'
 import { invoke } from '@tauri-apps/api'
+import { VITE_KC_API_BASE_URL } from 'env'
 
 const SKIP_AUTH =
   import.meta.env.VITE_KC_SKIP_AUTH === 'true' && import.meta.env.DEV
@@ -132,6 +133,7 @@ async function getUser(context: UserContext) {
         .catch((err) => console.error('error from Browser getUser', err))
     : invoke<Models['User_type'] | Record<'error_code', unknown>>('get_user', {
         token: context.token,
+        hostname: VITE_KC_API_BASE_URL,
       }).catch((err) => console.error('error from Tauri getUser', err))
 
   const user = await userPromise

src/routes/Onboarding/Camera.tsx

@@ -2,48 +2,78 @@ import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
 import { ActionButton } from '../../components/ActionButton'
 import { onboardingPaths, useDismiss, useNextClick } from '.'
 import { useStore } from '../../useStore'
+import { SettingsSection } from 'routes/Settings'
+import { useGlobalStateContext } from 'hooks/useGlobalStateContext'
+import {
+  CameraSystem,
+  cameraMouseDragGuards,
+  cameraSystems,
+} from 'lib/cameraControls'
 
 export default function Units() {
   const { buttonDownInStream } = useStore((s) => ({
     buttonDownInStream: s.buttonDownInStream,
   }))
   const dismiss = useDismiss()
-  const next = useNextClick(onboardingPaths.SKETCHING)
+  const next = useNextClick(onboardingPaths.STREAMING)
+  const {
+    settings: {
+      send,
+      state: {
+        context: { cameraControls },
+      },
+    },
+  } = useGlobalStateContext()
 
   return (
-    <div className="fixed grid justify-center items-end inset-0 z-50 pointer-events-none">
+    <div className="fixed inset-0 z-50 grid items-end justify-start px-4 pointer-events-none">
       <div
         className={
           'max-w-2xl flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded' +
           (buttonDownInStream ? '' : ' pointer-events-auto')
         }
       >
-        <h1 className="text-2xl font-bold">Camera</h1>
-        <p className="mt-6">
-          Moving the camera is easy! The controls are as you might expect:
-        </p>
-        <ul className="list-disc list-outside ms-8 mb-4">
-          <li>Click and drag anywhere in the scene to rotate the camera</li>
-          <li>
-            Hold down the <kbd>Shift</kbd> key while clicking and dragging to
-            pan the camera
-          </li>
-          <li>
-            Hold down the <kbd>Ctrl</kbd> key while dragging to zoom. You can
-            also use the scroll wheel to zoom in and out.
-          </li>
-        </ul>
-        <p>
-          What you're seeing here is just a video, and your interactions are
-          being sent to our Geometry Engine API, which sends back video frames
-          in real time. How cool is that? It means that you can use KittyCAD
-          Modeling App (or whatever you want to build) on any device, even a
-          cheap laptop with no graphics card!
-        </p>
-        <div className="flex justify-between mt-6">
+        <SettingsSection
+          title="Camera Controls"
+          description="How you want to control the camera in the 3D view. Try them out above and choose the one that feels most comfortable to you."
+          className="my-4 last-of-type:mb-12"
+        >
+          <select
+            id="camera-controls"
+            className="block w-full px-3 py-1 bg-transparent border border-chalkboard-30"
+            value={cameraControls}
+            onChange={(e) => {
+              send({
+                type: 'Set Camera Controls',
+                data: { cameraControls: e.target.value as CameraSystem },
+              })
+            }}
+          >
+            {cameraSystems.map((program) => (
+              <option key={program} value={program}>
+                {program}
+              </option>
+            ))}
+          </select>
+          <ul className="mx-4 my-2 text-sm leading-relaxed">
+            <li>
+              <strong>Pan:</strong>{' '}
+              {cameraMouseDragGuards[cameraControls].pan.description}
+            </li>
+            <li>
+              <strong>Zoom:</strong>{' '}
+              {cameraMouseDragGuards[cameraControls].zoom.description}
+            </li>
+            <li>
+              <strong>Rotate:</strong>{' '}
+              {cameraMouseDragGuards[cameraControls].rotate.description}
+            </li>
+          </ul>
+        </SettingsSection>
+        <div className="flex justify-between">
           <ActionButton
             Element="button"
-            onClick={() => dismiss('../../')}
+            onClick={dismiss}
             icon={{
               icon: faXmark,
               bgClassName: 'bg-destroy-80',
@@ -59,7 +89,7 @@ export default function Units() {
             onClick={next}
             icon={{ icon: faArrowRight }}
           >
-            Next: Sketching
+            Next: Streaming
           </ActionButton>
         </div>
       </div>

src/routes/Onboarding/CmdK.tsx

@@ -0,0 +1,85 @@
+import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
+import { ActionButton } from '../../components/ActionButton'
+import { onboardingPaths, useDismiss, useNextClick } from '.'
+import { useStore } from '../../useStore'
+import { Platform, platform } from '@tauri-apps/api/os'
+import { useEffect, useState } from 'react'
+
+export default function CmdK() {
+  const { buttonDownInStream } = useStore((s) => ({
+    buttonDownInStream: s.buttonDownInStream,
+  }))
+  const dismiss = useDismiss()
+  const next = useNextClick(onboardingPaths.USER_MENU)
+  const [platformName, setPlatformName] = useState<Platform | ''>('')
+
+  useEffect(() => {
+    async function getPlatform() {
+      setPlatformName(await platform())
+    }
+    getPlatform()
+  }, [setPlatformName])
+
+  return (
+    <div className="fixed inset-0 z-50 grid items-end justify-center pointer-events-none">
+      <div
+        className={
+          'max-w-full xl:max-w-4xl flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded' +
+          (buttonDownInStream ? '' : ' pointer-events-auto')
+        }
+      >
+        <h2 className="text-2xl">Command Bar</h2>
+        <p className="my-4">
+          Press{' '}
+          {platformName === 'win32' ? (
+            <>
+              <kbd>Win</kbd> + <kbd>/</kbd>
+            </>
+          ) : (
+            <>
+              <kbd>OS</kbd> + <kbd>K</kbd>
+            </>
+          )}{' '}
+          to open the command bar. Try changing your theme with it.
+        </p>
+        <p className="my-4">
+          We are working on a command bar that will allow you to quickly see and
+          search for any available commands. We are building KittyCAD Modeling
+          App's state management system on top of{' '}
+          <a
+            href="https://xstate.js.org/"
+            rel="noreferrer noopener"
+            target="_blank"
+          >
+            XState
+          </a>
+          . Currently you can only control settings, authentication, and file
+          management from the command bar, but we will be powering modeling
+          commands with it soon.
+        </p>
+        <div className="flex justify-between">
+          <ActionButton
+            Element="button"
+            onClick={dismiss}
+            icon={{
+              icon: faXmark,
+              bgClassName: 'bg-destroy-80',
+              iconClassName:
+                'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+            }}
+            className="hover:border-destroy-40"
+          >
+            Dismiss
+          </ActionButton>
+          <ActionButton
+            Element="button"
+            onClick={next}
+            icon={{ icon: faArrowRight }}
+          >
+            Next: User Menu
+          </ActionButton>
+        </div>
+      </div>
+    </div>
+  )
+}

src/routes/Onboarding/CodeEditor.tsx

@@ -0,0 +1,85 @@
+import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
+import { ActionButton } from '../../components/ActionButton'
+import { onboardingPaths, useDismiss, useNextClick } from '.'
+import { useStore } from '../../useStore'
+import { useBackdropHighlight } from 'hooks/useBackdropHighlight'
+
+export default function CodeEditor() {
+  const { buttonDownInStream } = useStore((s) => ({
+    buttonDownInStream: s.buttonDownInStream,
+  }))
+  const dismiss = useDismiss()
+  const next = useNextClick(onboardingPaths.PARAMETRIC_MODELING)
+
+  return (
+    <div className="fixed grid justify-end items-center inset-0 z-50 pointer-events-none">
+      <div
+        className="fixed inset-0 bg-black opacity-50 pointer-events-none"
+        style={{ clipPath: useBackdropHighlight('code-pane') }}
+      ></div>
+      <div
+        className={
+          'z-10 max-w-xl h-3/4 flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded' +
+          (buttonDownInStream ? '' : ' pointer-events-auto')
+        }
+      >
+        <section className="flex-1">
+          <h2 className="text-2xl">
+            Editing code with <code>kcl</code>
+          </h2>
+          <p className="my-4">
+            The left pane is where you write your code. It's a code editor with
+            syntax highlighting and autocompletion. We've decided to take the
+            difficult route of writing our own language—called <code>kcl</code>
+            —for describing geometry, because don't want to inherit all the
+            other functionality from existing languages. We have a lot of ideas
+            about how <code>kcl</code> will evolve, and we want to hear your
+            thoughts on it.
+          </p>
+          <p className="my-4">
+            We've built a language server for <code>kcl</code> that provides
+            documentation and autocompletion automatically generated from our
+            compiler code. You can try it out by hovering over some of the
+            function names in the pane now. If you like using VSCode, you can
+            try out our{' '}
+            <a
+              href="https://marketplace.visualstudio.com/items?itemName=KittyCAD.kcl-language-server"
+              rel="noreferrer noopener"
+              target="_blank"
+            >
+              VSCode extension
+            </a>
+            .
+          </p>
+          <p className="my-4">
+            You can resize the pane by dragging the handle on the right, and you
+            can collapse it by clicking the title bar or pressing{' '}
+            <kbd>Shift</kbd> + <kbd>C</kbd>.
+          </p>
+        </section>
+        <div className="flex justify-between">
+          <ActionButton
+            Element="button"
+            onClick={dismiss}
+            icon={{
+              icon: faXmark,
+              bgClassName: 'bg-destroy-80',
+              iconClassName:
+                'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+            }}
+            className="hover:border-destroy-40"
+          >
+            Dismiss
+          </ActionButton>
+          <ActionButton
+            Element="button"
+            onClick={next}
+            icon={{ icon: faArrowRight }}
+          >
+            Next: Parametric Modeling
+          </ActionButton>
+        </div>
+      </div>
+    </div>
+  )
+}

src/routes/Onboarding/Export.tsx

@@ -0,0 +1,65 @@
+import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
+import { ActionButton } from '../../components/ActionButton'
+import { onboardingPaths, useDismiss, useNextClick } from '.'
+import { useStore } from '../../useStore'
+
+export default function Export() {
+  const { buttonDownInStream } = useStore((s) => ({
+    buttonDownInStream: s.buttonDownInStream,
+  }))
+  const dismiss = useDismiss()
+  const next = useNextClick(onboardingPaths.SKETCHING)
+
+  return (
+    <div className="fixed grid justify-center items-end inset-0 z-50 pointer-events-none">
+      <div
+        className={
+          'max-w-full xl:max-w-2xl flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded' +
+          (buttonDownInStream ? '' : ' pointer-events-auto')
+        }
+      >
+        <section className="flex-1">
+          <h2 className="text-2xl">Export</h2>
+          <p className="my-4">
+            Try opening the project menu and clicking "Export Model".
+          </p>
+          <p className="my-4">
+            KittyCAD Modeling App uses our open-source extension proposal for
+            the GLTF file format.{' '}
+            <a
+              href="https://kittycad.io/docs/api/convert-cad-file"
+              rel="noopener noreferrer"
+              target="_blank"
+            >
+              Our conversion API
+            </a>{' '}
+            can convert to and from most common CAD file formats, allowing
+            export to almost any CAD software.
+          </p>
+        </section>
+        <div className="flex justify-between">
+          <ActionButton
+            Element="button"
+            onClick={dismiss}
+            icon={{
+              icon: faXmark,
+              bgClassName: 'bg-destroy-80',
+              iconClassName:
+                'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+            }}
+            className="hover:border-destroy-40"
+          >
+            Dismiss
+          </ActionButton>
+          <ActionButton
+            Element="button"
+            onClick={next}
+            icon={{ icon: faArrowRight }}
+          >
+            Next: Sketching
+          </ActionButton>
+        </div>
+      </div>
+    </div>
+  )
+}

src/routes/Onboarding/FutureWork.tsx

@@ -0,0 +1,59 @@
+import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
+import { ActionButton } from '../../components/ActionButton'
+import { useDismiss } from '.'
+import { useEffect } from 'react'
+import { useStore } from 'useStore'
+import { bracket } from 'lib/exampleKcl'
+
+export default function FutureWork() {
+  const dismiss = useDismiss()
+  const { deferredSetCode } = useStore((s) => ({
+    deferredSetCode: s.deferredSetCode,
+  }))
+
+  useEffect(() => {
+    deferredSetCode(bracket)
+  }, [deferredSetCode])
+
+  return (
+    <div className="fixed grid justify-center items-center inset-0 bg-chalkboard-100/50 z-50">
+      <div className="max-w-full xl:max-w-2xl flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded">
+        <h1 className="text-2xl font-bold">Future Work</h1>
+        <p className="my-4">
+          We have curves, cuts, and many more CAD features coming soon. We want
+          your feedback on this user interface, and we want to know what
+          features you want to see next. Please message us in the Discord server
+          and open issues on GitHub.
+        </p>
+        <p className="my-4">
+          If you make anything with the app we'd love to see it! Thank you for
+          taking time to try out KittyCAD Modeling App, and build the future of
+          hardware design with us 💚.
+        </p>
+        <p className="my-4">— The KittyCAD Team</p>
+        <div className="flex justify-between mt-6">
+          <ActionButton
+            Element="button"
+            onClick={dismiss}
+            icon={{
+              icon: faXmark,
+              bgClassName: 'bg-destroy-80',
+              iconClassName:
+                'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+            }}
+            className="hover:border-destroy-40"
+          >
+            Dismiss
+          </ActionButton>
+          <ActionButton
+            Element="button"
+            onClick={dismiss}
+            icon={{ icon: faArrowRight }}
+          >
+            Finish
+          </ActionButton>
+        </div>
+      </div>
+    </div>
+  )
+}

src/routes/Onboarding/InteractiveNumbers.tsx

@@ -0,0 +1,125 @@
+import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
+import { ActionButton } from '../../components/ActionButton'
+import { onboardingPaths, useDismiss, useNextClick } from '.'
+import { useStore } from '../../useStore'
+import { useBackdropHighlight } from 'hooks/useBackdropHighlight'
+
+export default function InteractiveNumbers() {
+  const { buttonDownInStream } = useStore((s) => ({
+    buttonDownInStream: s.buttonDownInStream,
+  }))
+  const dismiss = useDismiss()
+  const next = useNextClick(onboardingPaths.COMMAND_K)
+
+  return (
+    <div className="fixed grid justify-end items-center inset-0 z-50 pointer-events-none">
+      <div
+        className="fixed inset-0 bg-black opacity-50 pointer-events-none"
+        style={{ clipPath: useBackdropHighlight('code-pane') }}
+      ></div>
+      <div
+        className={
+          'z-10 max-w-xl h-3/4 flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded' +
+          (buttonDownInStream ? '' : ' pointer-events-auto')
+        }
+      >
+        <section className="flex-1 overflow-y-auto mb-6">
+          <h2 className="text-2xl">Interactive Numbers</h2>
+          <p className="my-4">
+            Let's do a little bit of hybrid editing to this part.
+          </p>
+          <p className="my-4">
+            Try changing the value of <code>width</code> on line 3 by holding
+            the <kbd>Alt</kbd> (or <kbd>Option</kbd>) key and dragging the
+            number left and right. You can hold down different modifier keys to
+            change the value by different increments:
+          </p>
+          <table className="border-collapse text-sm mx-auto my-4">
+            <tbody>
+              <tr>
+                <td className="border border-solid w-1/2 py-1 px-2 border-chalkboard-40 dark:border-chalkboard-70">
+                  <kbd>Alt + Shift + Cmd/Win</kbd>
+                </td>
+                <td className="border border-solid w-1/2 py-1 px-2 border-chalkboard-40 dark:border-chalkboard-70 text-right">
+                  0.01
+                </td>
+              </tr>
+              <tr>
+                <td className="border border-solid w-1/2 py-1 px-2 border-chalkboard-40 dark:border-chalkboard-70">
+                  <kbd>Alt + Cmd/Win</kbd>
+                </td>
+                <td className="border border-solid w-1/2 py-1 px-2 border-chalkboard-40 dark:border-chalkboard-70 text-right">
+                  0.1
+                </td>
+              </tr>
+              <tr>
+                <td className="border border-solid w-1/2 py-1 px-2 border-chalkboard-40 dark:border-chalkboard-70">
+                  <kbd>Alt</kbd>
+                </td>
+                <td className="border border-solid w-1/2 py-1 px-2 border-chalkboard-40 dark:border-chalkboard-70 text-right">
+                  1
+                </td>
+              </tr>
+              <tr>
+                <td className="border border-solid w-1/2 py-1 px-2 border-chalkboard-40 dark:border-chalkboard-70">
+                  <kbd>Alt + Shift</kbd>
+                </td>
+                <td className="border border-solid w-1/2 py-1 px-2 border-chalkboard-40 dark:border-chalkboard-70 text-right">
+                  10
+                </td>
+              </tr>
+            </tbody>
+          </table>
+          <p className="my-4">
+            Our code editor is built with{' '}
+            <a
+              href="https://codemirror.net/"
+              target="_blank"
+              rel="noreferrer noopeneer"
+            >
+              CodeMirror
+            </a>
+            , a great open-source project with extensions that make it even more
+            dynamic and interactive, including{' '}
+            <a
+              href="https://github.com/replit/codemirror-interact/"
+              target="_blank"
+              rel="noreferrer noopeneer"
+            >
+              one by the Replit team
+            </a>{' '}
+            lets you interact with numbers in your code by dragging them around.
+          </p>
+          <p className="my-4">
+            Editing code should feel as interactive as point-and-click when you
+            want it to be, so that you can work in the way that feels most
+            natural to you. We're going to keep extending the text editor, and
+            we'd love to hear your ideas for how to make it better.
+          </p>
+        </section>
+        <div className="flex justify-between">
+          <ActionButton
+            Element="button"
+            onClick={dismiss}
+            icon={{
+              icon: faXmark,
+              bgClassName: 'bg-destroy-80',
+              iconClassName:
+                'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+            }}
+            className="hover:border-destroy-40"
+          >
+            Dismiss
+          </ActionButton>
+          <ActionButton
+            Element="button"
+            onClick={next}
+            icon={{ icon: faArrowRight }}
+          >
+            Next: Command Bar
+          </ActionButton>
+        </div>
+      </div>
+    </div>
+  )
+}

src/routes/Onboarding/Introduction.tsx

@@ -1,29 +1,183 @@
 import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
 import { ActionButton } from '../../components/ActionButton'
 import { onboardingPaths, useDismiss, useNextClick } from '.'
+import { useGlobalStateContext } from 'hooks/useGlobalStateContext'
+import { Themes, getSystemTheme } from 'lib/theme'
+import { bracket } from 'lib/exampleKcl'
+import { useStore } from 'useStore'
+import {
+  createNewProject,
+  getNextProjectIndex,
+  getProjectsInDir,
+  interpolateProjectNameWithIndex,
+} from 'lib/tauriFS'
+import { isTauri } from 'lib/isTauri'
+import { useNavigate } from 'react-router-dom'
+import { paths } from 'Router'
+import { useEffect } from 'react'
 
-export default function Introduction() {
+function OnboardingWithNewFile() {
+  const navigate = useNavigate()
   const dismiss = useDismiss()
-  const next = useNextClick(onboardingPaths.UNITS)
+  const next = useNextClick(onboardingPaths.INDEX)
+  const { deferredSetCode } = useStore((s) => ({
+    deferredSetCode: s.deferredSetCode,
+  }))
+  const {
+    settings: {
+      context: { defaultDirectory, defaultProjectName },
+    },
+  } = useGlobalStateContext()
 
+  async function createAndOpenNewProject() {
+    const projects = await getProjectsInDir(defaultDirectory)
+    const nextIndex = await getNextProjectIndex(defaultProjectName, projects)
+    const name = interpolateProjectNameWithIndex(defaultProjectName, nextIndex)
+    const newFile = await createNewProject(defaultDirectory + '/' + name)
+    navigate(`${paths.FILE}/${encodeURIComponent(newFile.path)}`)
+  }
   return (
     <div className="fixed grid place-content-center inset-0 bg-chalkboard-110/50 z-50">
       <div className="max-w-3xl bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded">
-        <h1 className="text-2xl font-bold">
-          Welcome to the KittyCAD Modeling App
+        {!isTauri() ? (
+          <>
+            <h1 className="text-2xl font-bold text-warn-80 dark:text-warn-10">
+              Replaying onboarding resets your code
+            </h1>
+            <p className="my-4">
+              We see you have some of your own code written in this project.
+              Please save it somewhere else before continuing the onboarding.
+            </p>
+            <div className="flex justify-between mt-6">
+              <ActionButton
+                Element="button"
+                onClick={dismiss}
+                icon={{
+                  icon: faXmark,
+                  bgClassName: 'bg-destroy-80',
+                  iconClassName:
+                    'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+                }}
+                className="hover:border-destroy-40"
+              >
+                Dismiss
+              </ActionButton>
+              <ActionButton
+                Element="button"
+                onClick={() => {
+                  deferredSetCode(bracket)
+                  next()
+                }}
+                icon={{ icon: faArrowRight }}
+              >
+                Overwrite code and continue
+              </ActionButton>
+            </div>
+          </>
+        ) : (
+          <>
+            <h1 className="text-2xl font-bold flex gap-4 flex-wrap items-center">
+              Would you like to create a new project?
+            </h1>
+            <section className="my-12">
+              <p className="my-4">
+                You have some content in this project that we don't want to
+                overwrite. If you would like to create a new project, please
+                click the button below.
+              </p>
+            </section>
+            <div className="flex justify-between mt-6">
+              <ActionButton
+                Element="button"
+                onClick={dismiss}
+                icon={{
+                  icon: faXmark,
+                  bgClassName: 'bg-destroy-80',
+                  iconClassName:
+                    'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+                }}
+                className="hover:border-destroy-40"
+              >
+                Dismiss
+              </ActionButton>
+              <ActionButton
+                Element="button"
+                onClick={createAndOpenNewProject}
+                icon={{ icon: faArrowRight }}
+              >
+                Make a new project
+              </ActionButton>
+            </div>
+          </>
+        )}
+      </div>
+    </div>
+  )
+}
+
+export default function Introduction() {
+  const { deferredSetCode, code } = useStore((s) => ({
+    code: s.code,
+    deferredSetCode: s.deferredSetCode,
+  }))
+  const {
+    settings: {
+      state: {
+        context: { theme },
+      },
+    },
+  } = useGlobalStateContext()
+  const getLogoTheme = () =>
+    theme === Themes.Light ||
+    (theme === Themes.System && getSystemTheme() === Themes.Light)
+      ? '-dark'
+      : ''
+  const dismiss = useDismiss()
+  const next = useNextClick(onboardingPaths.CAMERA)
+
+  useEffect(() => {
+    if (code === '') deferredSetCode(bracket)
+  }, [code, deferredSetCode])
+
+  return !(code !== '' && code !== bracket) ? (
+    <div className="fixed grid place-content-center inset-0 bg-chalkboard-110/50 z-50">
+      <div className="max-w-3xl bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded">
+        <h1 className="text-2xl font-bold flex gap-4 flex-wrap items-center">
+          <img
+            src={`/kcma-logomark${getLogoTheme()}.svg`}
+            alt="KittyCAD Modeling App"
+            className="max-w-full h-20"
+          />
+          <span className="bg-energy-10 text-energy-80 px-3 py-1 rounded-full text-base">
+            Alpha
+          </span>
         </h1>
-        <p className="my-2">
-          A browser-first, GPU-streaming hardware design tool that lets you edit
-          visually, with code, or both.
-        </p>
-        <p className="my-2">
-          Powered by the first API created for anyone to build hardware design
-          tools.
-        </p>
+        <section className="my-12">
+          <p className="my-4">
+            Welcome to KittyCAD Modeling App! This is a hardware design tool
+            that lets you edit visually, with code, or both. It's powered by the
+            first API created for anyone to build hardware design tools. The 3D
+            view is not running on your computer, but is instead being streamed
+            to you from a remote GPU as video.
+          </p>
+          <p className="my-4">
+            This is an alpha release, so you will encounter bugs and missing
+            features. You can read our{' '}
+            <a
+              href="https://gist.github.com/jgomez720/5cd53fb7e8e54079f6dc0d2625de5393"
+              target="_blank"
+              rel="noreferrer noopener"
+            >
+              expectations for alpha users here
+            </a>
+            . Please give us feedback on your experience! We are trying to
+            release as early as possible to get feedback from users like you.
+          </p>
+        </section>
         <div className="flex justify-between mt-6">
           <ActionButton
             Element="button"
-            onClick={() => dismiss('../')}
+            onClick={dismiss}
             icon={{
               icon: faXmark,
               bgClassName: 'bg-destroy-80',
@@ -44,5 +198,7 @@ export default function Introduction() {
         </div>
       </div>
     </div>
+  ) : (
+    <OnboardingWithNewFile />
   )
 }

src/routes/Onboarding/ParametricModeling.tsx

@@ -0,0 +1,85 @@
+import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
+import { ActionButton } from '../../components/ActionButton'
+import { onboardingPaths, useDismiss, useNextClick } from '.'
+import { useStore } from '../../useStore'
+import { useBackdropHighlight } from 'hooks/useBackdropHighlight'
+import { Themes, getSystemTheme } from 'lib/theme'
+import { useGlobalStateContext } from 'hooks/useGlobalStateContext'
+
+export default function ParametricModeling() {
+  const { buttonDownInStream } = useStore((s) => ({
+    buttonDownInStream: s.buttonDownInStream,
+  }))
+  const {
+    settings: {
+      context: { theme },
+    },
+  } = useGlobalStateContext()
+  const getImageTheme = () =>
+    theme === Themes.Light ||
+    (theme === Themes.System && getSystemTheme() === Themes.Light)
+      ? '-dark'
+      : ''
+  const dismiss = useDismiss()
+  const next = useNextClick(onboardingPaths.INTERACTIVE_NUMBERS)
+
+  return (
+    <div className="fixed grid justify-end items-center inset-0 z-50 pointer-events-none">
+      <div
+        className="fixed inset-0 bg-black opacity-50 pointer-events-none"
+        style={{ clipPath: useBackdropHighlight('code-pane') }}
+      ></div>
+      <div
+        className={
+          'z-10 max-w-xl h-3/4 flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded' +
+          (buttonDownInStream ? '' : ' pointer-events-auto')
+        }
+      >
+        <section className="flex-1 overflow-y-auto mb-6">
+          <h2 className="text-2xl">Towards true parametric modeling</h2>
+          <p className="my-4">
+            This example script shows how having access to the code
+            representation of a part can allow us to do things that are tedious
+            or impossible in traditional CAD software. Here we are building a
+            simplified shelf bracket out of aluminum:
+          </p>
+          <figure className="my-4 w-3/4 mx-auto">
+            <img
+              src={`/onboarding-bracket${getImageTheme()}.png`}
+              alt="Bracket"
+            />
+            <figcaption className="text-small italic text-center">
+              A simplified shelf bracket
+            </figcaption>
+          </figure>
+          <p className="my-4">
+            We are able to easily calculate the thickness of the material based
+            on the width of the bracket to meet a set safety factor on line 6.
+          </p>
+        </section>
+        <div className="flex justify-between">
+          <ActionButton
+            Element="button"
+            onClick={dismiss}
+            icon={{
+              icon: faXmark,
+              bgClassName: 'bg-destroy-80',
+              iconClassName:
+                'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+            }}
+            className="hover:border-destroy-40"
+          >
+            Dismiss
+          </ActionButton>
+          <ActionButton
+            Element="button"
+            onClick={next}
+            icon={{ icon: faArrowRight }}
+          >
+            Next: Interactive Numbers
+          </ActionButton>
+        </div>
+      </div>
+    </div>
+  )
+}

src/routes/Onboarding/ProjectMenu.tsx

@@ -0,0 +1,56 @@
+import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
+import { ActionButton } from '../../components/ActionButton'
+import { onboardingPaths, useDismiss, useNextClick } from '.'
+import { useStore } from '../../useStore'
+import { isTauri } from 'lib/isTauri'
+
+export default function ProjectMenu() {
+  const { buttonDownInStream } = useStore((s) => ({
+    buttonDownInStream: s.buttonDownInStream,
+  }))
+  const dismiss = useDismiss()
+  const next = useNextClick(onboardingPaths.EXPORT)
+
+  return (
+    <div className="fixed grid justify-center items-start inset-0 z-50 pointer-events-none">
+      <div
+        className={
+          'max-w-xl flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded' +
+          (buttonDownInStream ? '' : ' pointer-events-auto')
+        }
+      >
+        <section className="flex-1">
+          <h2 className="text-2xl">Project Menu</h2>
+          <p className="my-4">
+            Click on Kitt in the upper left to open the project menu. You can
+            only {isTauri() && 'go home or '}export your model—which we'll talk
+            about next—for now. We'll add more options here soon, especially as
+            we add support for multi-file assemblies.
+          </p>
+        </section>
+        <div className="flex justify-between">
+          <ActionButton
+            Element="button"
+            onClick={dismiss}
+            icon={{
+              icon: faXmark,
+              bgClassName: 'bg-destroy-80',
+              iconClassName:
+                'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+            }}
+            className="hover:border-destroy-40"
+          >
+            Dismiss
+          </ActionButton>
+          <ActionButton
+            Element="button"
+            onClick={next}
+            icon={{ icon: faArrowRight }}
+          >
+            Next: Export
+          </ActionButton>
+        </div>
+      </div>
+    </div>
+  )
+}

src/routes/Onboarding/Sketching.tsx

@@ -1,21 +1,44 @@
 import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
 import { ActionButton } from '../../components/ActionButton'
-import { useDismiss } from '.'
+import { onboardingPaths, useDismiss, useNextClick } from '.'
+import { useStore } from 'useStore'
+import { useEffect } from 'react'
 
 export default function Sketching() {
+  const { deferredSetCode, buttonDownInStream } = useStore((s) => ({
+    deferredSetCode: s.deferredSetCode,
+    buttonDownInStream: s.buttonDownInStream,
+  }))
   const dismiss = useDismiss()
+  const next = useNextClick(onboardingPaths.FUTURE_WORK)
+
+  useEffect(() => {
+    deferredSetCode('')
+  }, [deferredSetCode])
 
   return (
-    <div className="fixed grid justify-center items-end inset-0 bg-chalkboard-110/50 z-50">
-      <div className="max-w-2xl flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded">
+    <div className="fixed grid justify-center items-end inset-0 z-50 pointer-events-none">
+      <div
+        className={
+          'max-w-full xl:max-w-2xl flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded' +
+          (buttonDownInStream ? '' : ' pointer-events-auto')
+        }
+      >
         <h1 className="text-2xl font-bold">Sketching</h1>
-        <p className="mt-6">
-          We still have to implement this step, and the rest of the tutorial!
+        <p className="my-4">
+          Our 3D modeling tools are still very much a work in progress, but we
+          want to show you some early features. Try creating a sketch by
+          clicking Create Sketch in the top toolbar, then clicking the Line
+          tool, and clicking in the 3D view.
+        </p>
+        <p className="my-4">
+          Watch the code pane as you click. Point-and-click interactions are
+          always just modifying and generating code in KittyCAD Modeling App.
         </p>
         <div className="flex justify-between mt-6">
           <ActionButton
             Element="button"
-            onClick={() => dismiss('../../')}
+            onClick={dismiss}
             icon={{
               icon: faXmark,
               bgClassName: 'bg-destroy-80',
@@ -28,10 +51,10 @@ export default function Sketching() {
           </ActionButton>
           <ActionButton
             Element="button"
-            onClick={() => dismiss('../../')}
+            onClick={next}
             icon={{ icon: faArrowRight }}
           >
-            Finish
+            Next: Future Work
           </ActionButton>
         </div>
       </div>

src/routes/Onboarding/Streaming.tsx

@@ -0,0 +1,66 @@
+import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
+import { ActionButton } from '../../components/ActionButton'
+import { onboardingPaths, useDismiss, useNextClick } from '.'
+import { useStore } from '../../useStore'
+
+export default function Streaming() {
+  const { buttonDownInStream } = useStore((s) => ({
+    buttonDownInStream: s.buttonDownInStream,
+  }))
+  const dismiss = useDismiss()
+  const next = useNextClick(onboardingPaths.EDITOR)
+
+  return (
+    <div className="fixed grid justify-start items-center inset-0 z-50 pointer-events-none">
+      <div
+        className={
+          'max-w-xl h-3/4 flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded' +
+          (buttonDownInStream ? '' : ' pointer-events-auto')
+        }
+      >
+        <section className="flex-1">
+          <h2 className="text-2xl">Streaming Video</h2>
+          <p className="my-4">
+            The 3D view is not running on your computer. Instead, our
+            infrastructure spins up the KittyCAD Geometry Engine on a remote
+            GPU, KittyCAD Modeling App sends it a series of commands via
+            Websockets and WebRTC, and the Geometry Engine sends back a video
+            stream of the 3D view.
+          </p>
+          <p className="my-4">
+            This means that you could run KittyCAD Modeling App on a Chromebook,
+            a tablet, or even a phone, as long as you have a good internet
+            connection.
+          </p>
+          <p className="my-4">
+            It also means that whatever tools you build on top of the KittyCAD
+            Geometry Engine will be able to run on any device with a browser,
+            and you won't have to worry about the performance of the device.
+          </p>
+        </section>
+        <div className="flex justify-between">
+          <ActionButton
+            Element="button"
+            onClick={dismiss}
+            icon={{
+              icon: faXmark,
+              bgClassName: 'bg-destroy-80',
+              iconClassName:
+                'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+            }}
+            className="hover:border-destroy-40"
+          >
+            Dismiss
+          </ActionButton>
+          <ActionButton
+            Element="button"
+            onClick={next}
+            icon={{ icon: faArrowRight }}
+          >
+            Next: Code Editing
+          </ActionButton>
+        </div>
+      </div>
+    </div>
+  )
+}

src/routes/Onboarding/Units.tsx

@@ -66,7 +66,7 @@ export default function Units() {
         <div className="flex justify-between mt-6">
           <ActionButton
             Element="button"
-            onClick={() => dismiss('../../')}
+            onClick={dismiss}
             icon={{
               icon: faXmark,
               bgClassName: 'bg-destroy-80',

src/routes/Onboarding/UserMenu.tsx

@@ -0,0 +1,53 @@
+import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
+import { ActionButton } from '../../components/ActionButton'
+import { onboardingPaths, useDismiss, useNextClick } from '.'
+import { useStore } from '../../useStore'
+
+export default function UserMenu() {
+  const { buttonDownInStream } = useStore((s) => ({
+    buttonDownInStream: s.buttonDownInStream,
+  }))
+  const dismiss = useDismiss()
+  const next = useNextClick(onboardingPaths.PROJECT_MENU)
+
+  return (
+    <div className="fixed grid justify-center items-start inset-0 z-50 pointer-events-none">
+      <div
+        className={
+          'max-w-xl flex flex-col justify-center bg-chalkboard-10 dark:bg-chalkboard-90 p-8 rounded' +
+          (buttonDownInStream ? '' : ' pointer-events-auto')
+        }
+      >
+        <section className="flex-1">
+          <h2 className="text-2xl">User Menu</h2>
+          <p className="my-4">
+            Click your avatar on the upper right to open the user menu. You can
+            change your settings, sign out, or request a feature.
+          </p>
+        </section>
+        <div className="flex justify-between">
+          <ActionButton
+            Element="button"
+            onClick={dismiss}
+            icon={{
+              icon: faXmark,
+              bgClassName: 'bg-destroy-80',
+              iconClassName:
+                'text-destroy-20 group-hover:text-destroy-10 hover:text-destroy-10',
+            }}
+            className="hover:border-destroy-40"
+          >
+            Dismiss
+          </ActionButton>
+          <ActionButton
+            Element="button"
+            onClick={next}
+            icon={{ icon: faArrowRight }}
+          >
+            Next: Project Menu
+          </ActionButton>
+        </div>
+      </div>
+    </div>
+  )
+}

src/routes/Onboarding/index.tsx

@@ -1,18 +1,36 @@
 import { useHotkeys } from 'react-hotkeys-hook'
-import { Outlet, useNavigate } from 'react-router-dom'
+import { Outlet, useRouteLoaderData, useNavigate } from 'react-router-dom'
 import Introduction from './Introduction'
-import Units from './Units'
 import Camera from './Camera'
 import Sketching from './Sketching'
 import { useCallback } from 'react'
 import makeUrlPathRelative from '../../lib/makeUrlPathRelative'
 import { useGlobalStateContext } from 'hooks/useGlobalStateContext'
+import Streaming from './Streaming'
+import CodeEditor from './CodeEditor'
+import ParametricModeling from './ParametricModeling'
+import InteractiveNumbers from './InteractiveNumbers'
+import CmdK from './CmdK'
+import UserMenu from './UserMenu'
+import ProjectMenu from './ProjectMenu'
+import Export from './Export'
+import FutureWork from './FutureWork'
+import { IndexLoaderData, paths } from 'Router'
 
 export const onboardingPaths = {
   INDEX: '/',
-  UNITS: '/units',
   CAMERA: '/camera',
+  STREAMING: '/streaming',
+  EDITOR: '/editor',
+  PARAMETRIC_MODELING: '/parametric-modeling',
+  INTERACTIVE_NUMBERS: '/interactive-numbers',
+  COMMAND_K: '/command-k',
+  USER_MENU: '/user-menu',
+  PROJECT_MENU: '/project-menu',
+  EXPORT: '/export',
+  MOVE: '/move',
   SKETCHING: '/sketching',
+  FUTURE_WORK: '/future-work',
 }
 
 export const onboardingRoutes = [
@@ -20,18 +38,51 @@ export const onboardingRoutes = [
     index: true,
     element: <Introduction />,
   },
-  {
-    path: makeUrlPathRelative(onboardingPaths.UNITS),
-    element: <Units />,
-  },
   {
     path: makeUrlPathRelative(onboardingPaths.CAMERA),
     element: <Camera />,
   },
+  {
+    path: makeUrlPathRelative(onboardingPaths.STREAMING),
+    element: <Streaming />,
+  },
+  {
+    path: makeUrlPathRelative(onboardingPaths.EDITOR),
+    element: <CodeEditor />,
+  },
+  {
+    path: makeUrlPathRelative(onboardingPaths.PARAMETRIC_MODELING),
+    element: <ParametricModeling />,
+  },
+  {
+    path: makeUrlPathRelative(onboardingPaths.INTERACTIVE_NUMBERS),
+    element: <InteractiveNumbers />,
+  },
+  {
+    path: makeUrlPathRelative(onboardingPaths.COMMAND_K),
+    element: <CmdK />,
+  },
+  {
+    path: makeUrlPathRelative(onboardingPaths.USER_MENU),
+    element: <UserMenu />,
+  },
+  {
+    path: makeUrlPathRelative(onboardingPaths.PROJECT_MENU),
+    element: <ProjectMenu />,
+  },
+  {
+    path: makeUrlPathRelative(onboardingPaths.EXPORT),
+    element: <Export />,
+  },
+  // Export / conversion API
   {
     path: makeUrlPathRelative(onboardingPaths.SKETCHING),
     element: <Sketching />,
   },
+  {
+    path: makeUrlPathRelative(onboardingPaths.FUTURE_WORK),
+    element: <FutureWork />,
+  },
 ]
 
 export function useNextClick(newStatus: string) {
@@ -39,37 +90,44 @@ export function useNextClick(newStatus: string) {
     settings: { send },
   } = useGlobalStateContext()
   const navigate = useNavigate()
+  const { project } = useRouteLoaderData(paths.FILE) as IndexLoaderData
 
   return useCallback(() => {
     send({
       type: 'Set Onboarding Status',
       data: { onboardingStatus: newStatus },
     })
-    navigate((newStatus !== onboardingPaths.UNITS ? '..' : '.') + newStatus)
-  }, [newStatus, send, navigate])
+    navigate(
+      paths.FILE +
+        '/' +
+        encodeURIComponent(project?.path || 'new') +
+        paths.ONBOARDING.INDEX.slice(0, -1) +
+        newStatus
+    )
+  }, [project, newStatus, send, navigate])
 }
 
 export function useDismiss() {
+  const routeData = useRouteLoaderData(paths.FILE) as IndexLoaderData
   const {
     settings: { send },
   } = useGlobalStateContext()
   const navigate = useNavigate()
 
-  return useCallback(
-    (path: string) => {
-      send({
-        type: 'Set Onboarding Status',
-        data: { onboardingStatus: 'dismissed' },
-      })
-      navigate(path)
-    },
-    [send, navigate]
-  )
+  return useCallback(() => {
+    send({
+      type: 'Set Onboarding Status',
+      data: { onboardingStatus: 'dismissed' },
+    })
+    navigate(
+      paths.FILE + '/' + encodeURIComponent(routeData?.project?.path || 'new')
+    )
+  }, [send, navigate, routeData])
 }
 
 const Onboarding = () => {
   const dismiss = useDismiss()
-  useHotkeys('esc', () => dismiss('../'))
+  useHotkeys('esc', dismiss)
 
   return (
     <>

src/routes/Settings.tsx

@@ -23,12 +23,14 @@ import {
   cameraMouseDragGuards,
 } from 'lib/cameraControls'
 import { UnitSystem } from 'machines/settingsMachine'
+import { useDotDotSlash } from 'hooks/useDotDotSlash'
 
 export const Settings = () => {
   const loaderData = useRouteLoaderData(paths.FILE) as IndexLoaderData
   const navigate = useNavigate()
   const location = useLocation()
-  useHotkeys('esc', () => navigate('../'))
+  const dotDotSlash = useDotDotSlash()
+  useHotkeys('esc', () => navigate(dotDotSlash()))
   const {
     settings: {
       send,
@@ -62,11 +64,11 @@ export const Settings = () => {
   }
 
   return (
-    <div className="body-bg fixed inset-0 z-40 overflow-auto">
+    <div className="fixed inset-0 z-40 overflow-auto body-bg">
       <AppHeader showToolbar={false} project={loaderData?.project}>
         <ActionButton
           Element="link"
-          to={'../'}
+          to={location.pathname.replace(paths.SETTINGS, '')}
           icon={{
             icon: faXmark,
             bgClassName: 'bg-destroy-80',
@@ -78,9 +80,9 @@ export const Settings = () => {
           Close
         </ActionButton>
       </AppHeader>
-      <div className="my-24 max-w-5xl mx-auto">
+      <div className="max-w-5xl mx-auto my-24">
         <h1 className="text-4xl font-bold">User Settings</h1>
-        <p className="mt-6 max-w-2xl">
+        <p className="max-w-2xl mt-6">
           Don't see the feature you want? Check to see if it's on{' '}
           <a
             href="https://github.com/KittyCAD/modeling-app/discussions"
@@ -98,7 +100,7 @@ export const Settings = () => {
         >
           <select
             id="camera-controls"
-            className="block w-full px-3 py-1 border border-chalkboard-30 bg-transparent"
+            className="block w-full px-3 py-1 bg-transparent border border-chalkboard-30"
             value={cameraControls}
             onChange={(e) => {
               send({
@@ -113,7 +115,7 @@ export const Settings = () => {
               </option>
             ))}
           </select>
-          <ul className="text-sm my-2 mx-4 leading-relaxed">
+          <ul className="mx-4 my-2 text-sm leading-relaxed">
             <li>
               <strong>Pan:</strong>{' '}
               {cameraMouseDragGuards[cameraControls].pan.description}
@@ -134,7 +136,7 @@ export const Settings = () => {
               title="Default Directory"
               description="Where newly-created projects are saved on your local computer"
             >
-              <div className="w-full flex gap-4 p-1 rounded border border-chalkboard-30">
+              <div className="flex w-full gap-4 p-1 border rounded border-chalkboard-30">
                 <input
                   className="flex-1 px-2 bg-transparent"
                   value={defaultDirectory}
@@ -161,7 +163,7 @@ export const Settings = () => {
               description="Name template for new projects. Use $n to include an incrementing index"
             >
               <input
-                className="block w-full px-3 py-1 border border-chalkboard-30 bg-transparent"
+                className="block w-full px-3 py-1 bg-transparent border border-chalkboard-30"
                 defaultValue={defaultProjectName}
                 onBlur={(e) => {
                   const newValue = e.target.value.trim() || DEFAULT_PROJECT_NAME
@@ -205,7 +207,7 @@ export const Settings = () => {
         >
           <select
             id="base-unit"
-            className="block w-full px-3 py-1 border border-chalkboard-30 bg-transparent"
+            className="block w-full px-3 py-1 bg-transparent border border-chalkboard-30"
             value={baseUnit}
             onChange={(e) => {
               send({
@@ -239,7 +241,7 @@ export const Settings = () => {
         >
           <select
             id="settings-theme"
-            className="block w-full px-3 py-1 border border-chalkboard-30 bg-transparent"
+            className="block w-full px-3 py-1 bg-transparent border border-chalkboard-30"
             value={theme}
             onChange={(e) => {
               send({
@@ -267,7 +269,7 @@ export const Settings = () => {
                   type: 'Set Onboarding Status',
                   data: { onboardingStatus: '' },
                 })
-                navigate('..' + paths.ONBOARDING.INDEX)
+                navigate(dotDotSlash(1) + paths.ONBOARDING.INDEX)
               }}
               icon={{ icon: faArrowRotateBack }}
             >
@@ -283,15 +285,22 @@ export const Settings = () => {
 interface SettingsSectionProps extends React.PropsWithChildren {
   title: string
   description?: string
+  className?: string
 }
 
 export function SettingsSection({
   title,
   description,
+  className,
   children,
 }: SettingsSectionProps) {
   return (
-    <section className="my-16 last-of-type:mb-24 grid grid-cols-2 gap-12 items-start">
+    <section
+      className={
+        'my-16 last-of-type:mb-24 grid grid-cols-2 gap-12 items-start ' +
+        className
+      }
+    >
       <div className="w-80">
         <h2 className="text-2xl">{title}</h2>
         <p className="mt-2 text-sm">{description}</p>

src/useStore.ts

@@ -18,6 +18,8 @@ import { EngineCommandManager } from './lang/std/engineConnection'
 import { KCLError } from './lang/errors'
 import { deferExecution } from 'lib/utils'
 import { _executor } from './lang/executor'
+import { bracket } from 'lib/exampleKcl'
+import { engineCommandManager } from './lang/std/engineConnection'
 
 export type Selection = {
   type: 'default' | 'line-end' | 'line-mid'
@@ -70,7 +72,7 @@ export type GuiModes =
       waitingFirstClick: boolean
       rotation: Rotation
       position: Position
-      id?: string
+      pathId: string
       pathToNode: PathToNode
     }
   | {
@@ -79,6 +81,15 @@ export type GuiModes =
       rotation: Rotation
       position: Position
       pathToNode: PathToNode
+      pathId: string
+    }
+  | {
+      mode: 'sketch'
+      sketchMode: 'enterSketchEdit'
+      rotation: Rotation
+      position: Position
+      pathToNode: PathToNode
+      pathId: string
     }
   | {
       mode: 'sketch'
@@ -152,8 +163,6 @@ export interface StoreState {
   setProgramMemory: (programMemory: ProgramMemory) => void
   isShiftDown: boolean
   setIsShiftDown: (isShiftDown: boolean) => void
-  engineCommandManager?: EngineCommandManager
-  setEngineCommandManager: (engineCommandManager: EngineCommandManager) => void
   mediaStream?: MediaStream
   setMediaStream: (mediaStream: MediaStream) => void
   isStreamReady: boolean
@@ -216,7 +225,7 @@ export const useStore = create<StoreState>()(
           const result = await executeCode({
             code: code || get().code,
             lastAst: get().ast,
-            engineCommandManager: get().engineCommandManager,
+            engineCommandManager: engineCommandManager,
           })
           if (!result.isChange) {
             return
@@ -312,7 +321,7 @@ export const useStore = create<StoreState>()(
           end: 0,
           body: [],
           nonCodeMeta: {
-            noneCodeNodes: {},
+            nonCodeNodes: {},
             start: null,
           },
         },
@@ -322,8 +331,6 @@ export const useStore = create<StoreState>()(
         executeAst: async (ast) => {
           const _ast = ast || get().ast
           if (!get().isStreamReady) return
-          const engineCommandManager = get().engineCommandManager!
-          if (!engineCommandManager) return
 
           set({ isExecuting: true })
           const { logs, errors, programMemory } = await executeAst({
@@ -340,8 +347,6 @@ export const useStore = create<StoreState>()(
         executeAstMock: async (ast) => {
           const _ast = ast || get().ast
           if (!get().isStreamReady) return
-          const engineCommandManager = get().engineCommandManager!
-          if (!engineCommandManager) return
 
           const { logs, errors, programMemory } = await executeAst({
             ast: _ast,
@@ -409,7 +414,7 @@ export const useStore = create<StoreState>()(
             }, 100) as unknown as number
           )
         },
-        code: '',
+        code: bracket,
         setCode: (code) => set({ code }),
         deferredSetCode: (code) => {
           set({ code })
@@ -425,8 +430,6 @@ export const useStore = create<StoreState>()(
         setProgramMemory: (programMemory) => set({ programMemory }),
         isShiftDown: false,
         setIsShiftDown: (isShiftDown) => set({ isShiftDown }),
-        setEngineCommandManager: (engineCommandManager) =>
-          set({ engineCommandManager }),
         setMediaStream: (mediaStream) => set({ mediaStream }),
         isStreamReady: false,
         setIsStreamReady: (isStreamReady) => set({ isStreamReady }),
@@ -444,7 +447,9 @@ export const useStore = create<StoreState>()(
         fileId: '',
         setFileId: (fileId) => set({ fileId }),
         streamDimensions: { streamWidth: 1280, streamHeight: 720 },
-        setStreamDimensions: (streamDimensions) => set({ streamDimensions }),
+        setStreamDimensions: (streamDimensions) => {
+          set({ streamDimensions })
+        },
         isExecuting: false,
         setIsExecuting: (isExecuting) => set({ isExecuting }),
 
@@ -509,7 +514,7 @@ async function executeCode({
 }: {
   code: string
   lastAst: Program
-  engineCommandManager?: EngineCommandManager
+  engineCommandManager: EngineCommandManager
 }): Promise<
   | {
       logs: string[]
@@ -529,7 +534,7 @@ async function executeCode({
     if (e instanceof KCLError) {
       errors = [e]
       logs = []
-      if (e.msg === 'file is empty') engineCommandManager?.endSession()
+      if (e.msg === 'file is empty') engineCommandManager.endSession()
     }
     return {
       isChange: true,
@@ -544,7 +549,7 @@ async function executeCode({
         end: 0,
         body: [],
         nonCodeMeta: {
-          noneCodeNodes: {},
+          nonCodeNodes: {},
           start: null,
         },
       },
@@ -552,7 +557,7 @@ async function executeCode({
   }
   // Check if the ast we have is equal to the ast in the storage.
   // If it is, we don't need to update the ast.
-  if (!engineCommandManager || JSON.stringify(ast) === JSON.stringify(lastAst))
+  if (JSON.stringify(ast) === JSON.stringify(lastAst))
     return { isChange: false }
 
   const { logs, errors, programMemory } = await executeAst({

src/wasm-lib/.config/nextest.toml

@@ -0,0 +1,22 @@
+# Each test can have at most 4 threads, but if its name contains "serial_test_", then it
+# also requires 4 threads.
+# This means such tests run one at a time, with 4 threads.
+
+[test-groups]
+serial-integration = { max-threads = 4 }
+
+[profile.default]
+slow-timeout = { period = "10s", terminate-after = 1 }
+
+[profile.ci]
+slow-timeout = { period = "60s", terminate-after = 10 }
+
+[[profile.default.overrides]]
+filter = "test(serial_test_)"
+test-group = "serial-integration"
+threads-required = 4
+
+[[profile.ci.overrides]]
+filter = "test(serial_test_)"
+test-group = "serial-integration"
+threads-required = 4

src/wasm-lib/Cargo.toml

@@ -12,7 +12,8 @@ bson = { version = "2.7.0", features = ["uuid-1", "chrono"] }
 gloo-utils = "0.2.0"
 kcl-lib = { path = "kcl" }
 kittycad = { version = "0.2.25", default-features = false, features = ["js"] }
-serde_json = "1.0.106"
+serde_json = "1.0.107"
+uuid = { version = "1.4.1", features = ["v4", "js", "serde"] }
 wasm-bindgen = "0.2.87"
 wasm-bindgen-futures = "0.4.37"
 
@@ -20,6 +21,7 @@ wasm-bindgen-futures = "0.4.37"
 anyhow = "1"
 image = "0.24.7"
 kittycad = "0.2.25"
+pretty_assertions = "1.4.0"
 reqwest = { version = "0.11.20", default-features = false }
 tokio = { version = "1.32.0", features = ["rt-multi-thread", "macros", "time"] }
 twenty-twenty = "0.6.1"
@@ -50,3 +52,11 @@ members = [
 	"derive-docs",
 	"kcl",
 ]
+
+[[test]]
+name = "executor"
+path = "tests/executor/main.rs"
+
+[[test]]
+name = "modify"
+path = "tests/modify/main.rs"

src/wasm-lib/derive-docs/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "derive-docs"
 description = "A tool for generating documentation from Rust derive macros"
-version = "0.1.3"
+version = "0.1.4"
 edition = "2021"
 license = "MIT"
 
@@ -16,7 +16,7 @@ proc-macro2 = "1"
 quote = "1"
 serde = { version = "1.0.188", features = ["derive"] }
 serde_tokenstream = "0.2"
-syn = { version = "2.0.33", features = ["full"] }
+syn = { version = "2.0.37", features = ["full"] }
 
 [dev-dependencies]
 expectorate = "1.0.7"

src/wasm-lib/derive-docs/src/lib.rs

@@ -79,13 +79,6 @@ fn do_stdlib_inner(
         ));
     }
 
-    if ast.sig.asyncness.is_some() {
-        errors.push(Error::new_spanned(
-            &ast.sig.fn_token,
-            "stdlib functions must not be async",
-        ));
-    }
-
     if ast.sig.unsafety.is_some() {
         errors.push(Error::new_spanned(
             &ast.sig.unsafety,
@@ -118,6 +111,7 @@ fn do_stdlib_inner(
     let fn_name = &ast.sig.ident;
     let fn_name_str = fn_name.to_string().replace("inner_", "");
     let fn_name_ident = format_ident!("{}", fn_name_str);
+    let boxed_fn_name_ident = format_ident!("boxed_{}", fn_name_str);
     let _visibility = &ast.vis;
 
     let (summary_text, description_text) = extract_doc_from_attrs(&ast.attrs);
@@ -204,7 +198,10 @@ fn do_stdlib_inner(
             syn::FnArg::Typed(pat) => pat.ty.as_ref().into_token_stream(),
         };
 
-        let ty_string = ty.to_string().replace('&', "").replace("mut", "").replace(' ', "");
+        let mut ty_string = ty.to_string().replace('&', "").replace("mut", "").replace(' ', "");
+        if ty_string.starts_with("Args") {
+            ty_string = "Args".to_string();
+        }
         let ty_string = ty_string.trim().to_string();
         let ty_ident = if ty_string.starts_with("Vec<") {
             let ty_string = ty_string.trim_start_matches("Vec<").trim_end_matches('>');
@@ -212,6 +209,12 @@ fn do_stdlib_inner(
             quote! {
                Vec<#ty_ident>
             }
+        } else if ty_string.starts_with("Box<") {
+            let ty_string = ty_string.trim_start_matches("Box<").trim_end_matches('>');
+            let ty_ident = format_ident!("{}", ty_string);
+            quote! {
+               #ty_ident
+            }
         } else {
             let ty_ident = format_ident!("{}", ty_string);
             quote! {
@@ -250,7 +253,15 @@ fn do_stdlib_inner(
         .replace("Result < ", "")
         .replace(", KclError >", "");
     let return_type = if !ret_ty_string.is_empty() {
-        let ret_ty_string = ret_ty_string.trim().to_string();
+        let ret_ty_string = if ret_ty_string.starts_with("Box <") {
+            ret_ty_string
+                .trim_start_matches("Box <")
+                .trim_end_matches('>')
+                .trim()
+                .to_string()
+        } else {
+            ret_ty_string.trim().to_string()
+        };
         let ret_ty_ident = format_ident!("{}", ret_ty_string);
         let ret_ty_string = clean_type(&ret_ty_string);
         quote! {
@@ -291,6 +302,14 @@ fn do_stdlib_inner(
         #description_doc_comment
         #const_struct
 
+        fn #boxed_fn_name_ident(
+            args: crate::std::Args,
+        ) -> std::pin::Pin<
+            Box<dyn std::future::Future<Output = anyhow::Result<crate::executor::MemoryItem, crate::errors::KclError>>>,
+        > {
+            Box::pin(#fn_name_ident(args))
+        }
+
         impl #docs_crate::StdLibFn for #name_ident
         {
             fn name(&self) -> String {
@@ -334,7 +353,7 @@ fn do_stdlib_inner(
             }
 
             fn std_lib_fn(&self) -> crate::std::StdFn {
-                #fn_name_ident
+                #boxed_fn_name_ident
             }
 
             fn clone_box(&self) -> Box<dyn #docs_crate::StdLibFn> {
@@ -475,6 +494,9 @@ fn clean_type(t: &str) -> String {
     if t.starts_with("Vec<") {
         t = t.replace("Vec<", "[").replace('>', "]");
     }
+    if t.starts_with("Box<") {
+        t = t.replace("Box<", "").replace('>', "");
+    }
 
     if t == "f64" {
         return "number".to_string();
@@ -564,4 +586,26 @@ mod tests {
         assert!(errors.is_empty());
         expectorate::assert_contents("tests/show.gen", &openapitor::types::get_text_fmt(&item).unwrap());
     }
+
+    #[test]
+    fn test_stdlib_box() {
+        let (item, errors) = do_stdlib(
+            quote! {
+                name = "show",
+            },
+            quote! {
+                fn inner_show(
+                    /// The args to do shit to.
+                    args: Box<f64>
+                ) -> Box<f64> {
+                    args
+                }
+            },
+        )
+        .unwrap();
+        let _expected = quote! {};
+
+        assert!(errors.is_empty());
+        expectorate::assert_contents("tests/box.gen", &openapitor::types::get_text_fmt(&item).unwrap());
+    }
 }

src/wasm-lib/derive-docs/tests/box.gen

@@ -0,0 +1,82 @@
+#[allow(non_camel_case_types, missing_docs)]
+#[doc = "Std lib function: show"]
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash, schemars :: JsonSchema, ts_rs :: TS)]
+#[ts(export)]
+pub(crate) struct Show {}
+
+#[allow(non_upper_case_globals, missing_docs)]
+#[doc = "Std lib function: show"]
+pub(crate) const Show: Show = Show {};
+fn boxed_show(
+    args: crate::std::Args,
+) -> std::pin::Pin<
+    Box<
+        dyn std::future::Future<
+            Output = anyhow::Result<crate::executor::MemoryItem, crate::errors::KclError>,
+        >,
+    >,
+> {
+    Box::pin(show(args))
+}
+
+impl crate::docs::StdLibFn for Show {
+    fn name(&self) -> String {
+        "show".to_string()
+    }
+
+    fn summary(&self) -> String {
+        "".to_string()
+    }
+
+    fn description(&self) -> String {
+        "".to_string()
+    }
+
+    fn tags(&self) -> Vec<String> {
+        vec![]
+    }
+
+    fn args(&self) -> Vec<crate::docs::StdLibFnArg> {
+        let mut settings = schemars::gen::SchemaSettings::openapi3();
+        settings.inline_subschemas = true;
+        let mut generator = schemars::gen::SchemaGenerator::new(settings);
+        vec![crate::docs::StdLibFnArg {
+            name: "args".to_string(),
+            type_: "number".to_string(),
+            schema: f64::json_schema(&mut generator),
+            required: true,
+        }]
+    }
+
+    fn return_value(&self) -> Option<crate::docs::StdLibFnArg> {
+        let mut settings = schemars::gen::SchemaSettings::openapi3();
+        settings.inline_subschemas = true;
+        let mut generator = schemars::gen::SchemaGenerator::new(settings);
+        Some(crate::docs::StdLibFnArg {
+            name: "".to_string(),
+            type_: "number".to_string(),
+            schema: f64::json_schema(&mut generator),
+            required: true,
+        })
+    }
+
+    fn unpublished(&self) -> bool {
+        false
+    }
+
+    fn deprecated(&self) -> bool {
+        false
+    }
+
+    fn std_lib_fn(&self) -> crate::std::StdFn {
+        boxed_show
+    }
+
+    fn clone_box(&self) -> Box<dyn crate::docs::StdLibFn> {
+        Box::new(self.clone())
+    }
+}
+
+fn inner_show(#[doc = r" The args to do shit to."] args: Box<f64>) -> Box<f64> {
+    args
+}

src/wasm-lib/derive-docs/tests/lineTo.gen

@@ -7,6 +7,18 @@ pub(crate) struct LineTo {}
 #[allow(non_upper_case_globals, missing_docs)]
 #[doc = "Std lib function: lineTo"]
 pub(crate) const LineTo: LineTo = LineTo {};
+fn boxed_line_to(
+    args: crate::std::Args,
+) -> std::pin::Pin<
+    Box<
+        dyn std::future::Future<
+            Output = anyhow::Result<crate::executor::MemoryItem, crate::errors::KclError>,
+        >,
+    >,
+> {
+    Box::pin(line_to(args))
+}
+
 impl crate::docs::StdLibFn for LineTo {
     fn name(&self) -> String {
         "lineTo".to_string()
@@ -65,7 +77,7 @@ impl crate::docs::StdLibFn for LineTo {
     }
 
     fn std_lib_fn(&self) -> crate::std::StdFn {
-        line_to
+        boxed_line_to
     }
 
     fn clone_box(&self) -> Box<dyn crate::docs::StdLibFn> {

src/wasm-lib/derive-docs/tests/min.gen

@@ -7,6 +7,18 @@ pub(crate) struct Min {}
 #[allow(non_upper_case_globals, missing_docs)]
 #[doc = "Std lib function: min"]
 pub(crate) const Min: Min = Min {};
+fn boxed_min(
+    args: crate::std::Args,
+) -> std::pin::Pin<
+    Box<
+        dyn std::future::Future<
+            Output = anyhow::Result<crate::executor::MemoryItem, crate::errors::KclError>,
+        >,
+    >,
+> {
+    Box::pin(min(args))
+}
+
 impl crate::docs::StdLibFn for Min {
     fn name(&self) -> String {
         "min".to_string()
@@ -57,7 +69,7 @@ impl crate::docs::StdLibFn for Min {
     }
 
     fn std_lib_fn(&self) -> crate::std::StdFn {
-        min
+        boxed_min
     }
 
     fn clone_box(&self) -> Box<dyn crate::docs::StdLibFn> {