Cut release v0.10.0 (#803)

Co-authored-by: Frank Noirot <frank@kittycad.io>

.github/workflows/cargo-build.yml

@@ -15,6 +15,9 @@ on:
       - '**/Cargo.lock'
       - '**/rust-toolchain.toml'
       - .github/workflows/cargo-build.yml
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
 name: cargo build
 jobs:
   cargobuild:

.github/workflows/cargo-clippy.yml

@@ -15,6 +15,9 @@ on:
       - '**/rust-toolchain.toml'
       - '**.rs'
       - .github/workflows/cargo-build.yml
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
 name: cargo clippy
 jobs:
   cargoclippy:

.github/workflows/cargo-criterion.yml

@@ -17,6 +17,9 @@ on:
       - .github/workflows/cargo-criterion.yml
   workflow_dispatch:
 permissions: read-all
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
 name: cargo criterion
 jobs:
   cargocriterion:

.github/workflows/cargo-fmt.yml

@@ -18,6 +18,9 @@ on:
 permissions:
   packages: read
   contents: read
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
 name: cargo fmt
 jobs:
   cargofmt:

.github/workflows/cargo-test.yml

@@ -17,6 +17,9 @@ on:
       - .github/workflows/cargo-test.yml
   workflow_dispatch:
 permissions: read-all
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
 name: cargo test
 jobs:
   cargotest:

.github/workflows/ci.yml

@@ -8,6 +8,9 @@ on:
   release:
     types: [published]
 
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
 jobs:
   check-format:
     runs-on: 'ubuntu-20.04'

docs/kcl/std.md

@@ -48,7 +48,9 @@
 	* [`show`](#show)
 	* [`sin`](#sin)
 	* [`sqrt`](#sqrt)
+	* [`startProfileAt`](#startProfileAt)
 	* [`startSketchAt`](#startSketchAt)
+	* [`startSketchOn`](#startSketchOn)
 	* [`tan`](#tan)
 	* [`tangentalArc`](#tangentalArc)
 	* [`tangentalArcTo`](#tangentalArcTo)
@@ -120,6 +122,8 @@ angleToMatchLengthX(segment_name: string, to: number, sketch_group: SketchGroup)
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -204,6 +208,8 @@ angleToMatchLengthY(segment_name: string, to: number, sketch_group: SketchGroup)
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -298,6 +304,8 @@ angledLine(data: AngledLineData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -364,6 +372,8 @@ angledLine(data: AngledLineData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -454,6 +464,8 @@ angledLineOfXLength(data: AngledLineData, sketch_group: SketchGroup) -> SketchGr
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -520,6 +532,8 @@ angledLineOfXLength(data: AngledLineData, sketch_group: SketchGroup) -> SketchGr
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -610,6 +624,8 @@ angledLineOfYLength(data: AngledLineData, sketch_group: SketchGroup) -> SketchGr
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -676,6 +692,8 @@ angledLineOfYLength(data: AngledLineData, sketch_group: SketchGroup) -> SketchGr
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -767,6 +785,8 @@ angledLineThatIntersects(data: AngeledLineThatIntersectsData, sketch_group: Sket
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -833,6 +853,8 @@ angledLineThatIntersects(data: AngeledLineThatIntersectsData, sketch_group: Sket
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -923,6 +945,8 @@ angledLineToX(data: AngledLineToData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -989,6 +1013,8 @@ angledLineToX(data: AngledLineToData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -1079,6 +1105,8 @@ angledLineToY(data: AngledLineToData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -1145,6 +1173,8 @@ angledLineToY(data: AngledLineToData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -1262,6 +1292,8 @@ arc(data: ArcData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -1328,6 +1360,8 @@ arc(data: ArcData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -1467,6 +1501,8 @@ bezierCurve(data: BezierData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -1533,6 +1569,8 @@ bezierCurve(data: BezierData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -1631,6 +1669,8 @@ close(sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -1697,6 +1737,8 @@ close(sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -1815,6 +1857,8 @@ extrude(length: number, sketch_group: SketchGroup) -> ExtrudeGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -1996,6 +2040,8 @@ lastSegX(sketch_group: SketchGroup) -> number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -2078,6 +2124,8 @@ lastSegY(sketch_group: SketchGroup) -> number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -2233,6 +2281,8 @@ line(data: LineData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -2299,6 +2349,8 @@ line(data: LineData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -2387,6 +2439,8 @@ lineTo(data: LineToData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -2453,6 +2507,8 @@ lineTo(data: LineToData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -2693,6 +2749,8 @@ segAng(segment_name: string, sketch_group: SketchGroup) -> number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -2776,6 +2834,8 @@ segEndX(segment_name: string, sketch_group: SketchGroup) -> number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -2859,6 +2919,8 @@ segEndY(segment_name: string, sketch_group: SketchGroup) -> number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -2942,6 +3004,8 @@ segLen(segment_name: string, sketch_group: SketchGroup) -> number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3024,6 +3088,8 @@ show(sketch: SketchGroup)
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3125,14 +3191,14 @@ sqrt(num: number) -> number
 
 
 
-### startSketchAt
+### startProfileAt
 
-Start a sketch at a given point.
+Start a profile at a given point.
 
 
 
 ```
-startSketchAt(data: LineData) -> SketchGroup
+startProfileAt(data: LineData, plane: Plane) -> SketchGroup
 ```
 
 #### Arguments
@@ -3147,6 +3213,40 @@ startSketchAt(data: LineData) -> SketchGroup
 } |
 [number]
 ```
+* `plane`: `Plane` - A plane.
+```
+{
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// Type for a plane.
+	value: string |
+string,
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
 
 #### Returns
 
@@ -3155,6 +3255,8 @@ startSketchAt(data: LineData) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3216,6 +3318,188 @@ startSketchAt(data: LineData) -> SketchGroup
 
 
 
+### startSketchAt
+
+Start a sketch at a given point on the 'XY' plane.
+
+
+
+```
+startSketchAt(data: LineData) -> SketchGroup
+```
+
+#### Arguments
+
+* `data`: `LineData` - Data to draw a line.
+```
+{
+	// The tag.
+	tag: string,
+	// The to point.
+	to: [number],
+} |
+[number]
+```
+
+#### Returns
+
+* `SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The id of the sketch group.
+	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
+	// The position of the sketch group.
+	position: [number],
+	// The rotation of the sketch group.
+	rotation: [number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number],
+	type: string,
+} |
+{
+	// The from point.
+	from: [number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number],
+	type: string,
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number],
+	type: string,
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number],
+	type: string,
+}],
+}
+```
+
+
+
+### startSketchOn
+
+Start a sketch at a given point.
+
+
+
+```
+startSketchOn(data: PlaneData) -> Plane
+```
+
+#### Arguments
+
+* `data`: `PlaneData` - Data for a plane.
+```
+string |
+string |
+string |
+string |
+string |
+string |
+{
+	plane: {
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s X axis be?
+	x_axis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	y_axis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	z_axis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+}
+```
+
+#### Returns
+
+* `Plane` - A plane.
+```
+{
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// Type for a plane.
+	value: string |
+string,
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+
 ### tan
 
 Computes the tangent of a number (in radians).
@@ -3269,6 +3553,8 @@ tangentalArc(data: TangentalArcData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3335,6 +3621,8 @@ tangentalArc(data: TangentalArcData, sketch_group: SketchGroup) -> SketchGroup
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3423,6 +3711,8 @@ tangentalArcTo(data: TangentalArcToData, sketch_group: SketchGroup) -> SketchGro
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3489,6 +3779,8 @@ tangentalArcTo(data: TangentalArcToData, sketch_group: SketchGroup) -> SketchGro
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3596,6 +3888,8 @@ number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3662,6 +3956,8 @@ number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3750,6 +4046,8 @@ number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3816,6 +4114,8 @@ number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3904,6 +4204,8 @@ number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -3970,6 +4272,8 @@ number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -4058,6 +4362,8 @@ number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.
@@ -4124,6 +4430,8 @@ number
 {
 	// The id of the sketch group.
 	id: uuid,
+	// The plane id of the sketch group.
+	planeId: uuid,
 	// The position of the sketch group.
 	position: [number],
 	// The rotation of the sketch group.

package.json

@@ -1,6 +1,6 @@
 {
   "name": "untitled-app",
-  "version": "0.9.5",
+  "version": "0.10.0",
   "private": true,
   "dependencies": {
     "@codemirror/autocomplete": "^6.9.0",
@@ -10,7 +10,7 @@
     "@fortawesome/react-fontawesome": "^0.2.0",
     "@headlessui/react": "^1.7.13",
     "@headlessui/tailwindcss": "^0.2.0",
-    "@kittycad/lib": "^0.0.40",
+    "@kittycad/lib": "^0.0.43",
     "@lezer/javascript": "^1.4.7",
     "@open-rpc/client-js": "^1.8.1",
     "@react-hook/resize-observer": "^1.2.6",
@@ -32,7 +32,7 @@
     "fuse.js": "^6.6.2",
     "http-server": "^14.1.1",
     "json-rpc-2.0": "^1.6.0",
-    "re-resizable": "^6.9.9",
+    "re-resizable": "^6.9.11",
     "react": "^18.2.0",
     "react-dom": "^18.2.0",
     "react-hot-toast": "^2.4.1",

src-tauri/Cargo.lock

@@ -3712,9 +3712,9 @@ dependencies = [
 
 [[package]]
 name = "tauri"
-version = "1.5.0"
+version = "1.5.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "72aee3277d0a0df01472cc704ab5934a51a1f25348838df17bfb3c5cb727880c"
+checksum = "0238c5063bf9613054149a1b6bce4935922e532b7d8211f36989a490a79806be"
 dependencies = [
  "anyhow",
  "base64 0.21.2",
@@ -3828,7 +3828,7 @@ dependencies = [
 [[package]]
 name = "tauri-plugin-fs-extra"
 version = "0.0.0"
-source = "git+https://github.com/tauri-apps/plugins-workspace?branch=v1#9b96996b5a90a6a57d587ce4312975f13a4d8bc2"
+source = "git+https://github.com/tauri-apps/plugins-workspace?branch=v1#fa32d1afa97f52f74d814c5619b8d95da3268e3e"
 dependencies = [
  "log",
  "serde",

src-tauri/Cargo.toml

@@ -20,7 +20,7 @@ kittycad = "0.2.28"
 oauth2 = "4.4.2"
 serde = { version = "1.0", features = ["derive"] }
 serde_json = "1.0"
-tauri = { version = "1.5.0", features = [ "os-all", "dialog-all", "fs-all", "http-request", "path-all", "shell-open", "shell-open-api", "updater", "devtools"] }
+tauri = { version = "1.5.1", features = [ "os-all", "dialog-all", "fs-all", "http-request", "path-all", "shell-open", "shell-open-api", "updater", "devtools"] }
 tauri-plugin-fs-extra = { git = "https://github.com/tauri-apps/plugins-workspace", branch = "v1" }
 tokio = { version = "1.32.0", features = ["time"] }
 toml = "0.8.2"

src-tauri/tauri.conf.json

@@ -8,7 +8,7 @@
   },
   "package": {
     "productName": "kittycad-modeling",
-    "version": "0.9.5"
+    "version": "0.10.0"
   },
   "tauri": {
     "allowlist": {

src/App.test.tsx

@@ -1,9 +1,15 @@
 import { render, screen } from '@testing-library/react'
 import { App } from './App'
 import { describe, test, vi } from 'vitest'
-import { BrowserRouter } from 'react-router-dom'
+import {
+  Route,
+  RouterProvider,
+  createMemoryRouter,
+  createRoutesFromElements,
+} from 'react-router-dom'
 import { GlobalStateProvider } from './components/GlobalStateProvider'
 import CommandBarProvider from 'components/CommandBar'
+import { BROWSER_FILE_NAME } from 'Router'
 
 let listener: ((rect: any) => void) | undefined = undefined
 ;(global as any).ResizeObserver = class ResizeObserver {
@@ -24,7 +30,7 @@ describe('App tests', () => {
       >
       return {
         ...actual,
-        useParams: () => ({ id: 'new' }),
+        useParams: () => ({ id: BROWSER_FILE_NAME }),
         useLoaderData: () => ({ code: null }),
       }
     })
@@ -41,12 +47,24 @@ describe('App tests', () => {
 })
 
 function TestWrap({ children }: { children: React.ReactNode }) {
-  // wrap in router and xState context
-  return (
-    <BrowserRouter>
-      <CommandBarProvider>
-        <GlobalStateProvider>{children}</GlobalStateProvider>
-      </CommandBarProvider>
-    </BrowserRouter>
+  // We have to use a memory router in the testing environment,
+  // and we have to use the createMemoryRouter function instead of <MemoryRouter /> as of react-router v6.4:
+  // https://reactrouter.com/en/6.16.0/routers/picking-a-router#using-v64-data-apis
+  const router = createMemoryRouter(
+    createRoutesFromElements(
+      <Route
+        path="/file/:id"
+        element={
+          <CommandBarProvider>
+            <GlobalStateProvider>{children}</GlobalStateProvider>
+          </CommandBarProvider>
+        }
+      />
+    ),
+    {
+      initialEntries: ['/file/new'],
+      initialIndex: 0,
+    }
   )
+  return <RouterProvider router={router} />
 }

src/Router.tsx

@@ -94,6 +94,8 @@ export const paths = {
   ) as typeof onboardingPaths,
 }
 
+export const BROWSER_FILE_NAME = 'new'
+
 export type IndexLoaderData = {
   code: string | null
   project?: ProjectWithEntryPointMetadata
@@ -129,7 +131,9 @@ const router = createBrowserRouter(
     {
       path: paths.INDEX,
       loader: () =>
-        isTauri() ? redirect(paths.HOME) : redirect(paths.FILE + '/new'),
+        isTauri()
+          ? redirect(paths.HOME)
+          : redirect(paths.FILE + '/' + BROWSER_FILE_NAME),
       errorElement: <ErrorPage />,
     },
     {
@@ -167,7 +171,7 @@ const router = createBrowserRouter(
           )
         }
 
-        if (params.id && params.id !== 'new') {
+        if (params.id && params.id !== BROWSER_FILE_NAME) {
           // Note that PROJECT_ENTRYPOINT is hardcoded until we support multiple files
           const code = await readTextFile(params.id + '/' + PROJECT_ENTRYPOINT)
           const entrypoint_metadata = await metadata(
@@ -212,7 +216,7 @@ const router = createBrowserRouter(
       ),
       loader: async () => {
         if (!isTauri()) {
-          return redirect(paths.FILE + '/new')
+          return redirect(paths.FILE + '/' + BROWSER_FILE_NAME)
         }
         const fetchedStorage = localStorage?.getItem(SETTINGS_PERSIST_KEY)
         const persistedSettings = JSON.parse(fetchedStorage || '{}') as Partial<

src/Toolbar.tsx

@@ -10,7 +10,7 @@ import { SetHorzVertDistance } from './components/Toolbar/SetHorzVertDistance'
 import { SetAngleLength } from './components/Toolbar/setAngleLength'
 import { SetAbsDistance } from './components/Toolbar/SetAbsDistance'
 import { SetAngleBetween } from './components/Toolbar/SetAngleBetween'
-import { Fragment, useEffect } from 'react'
+import { Fragment, WheelEvent, useRef } from 'react'
 import { FontAwesomeIcon } from '@fortawesome/react-fontawesome'
 import { faSearch, faX } from '@fortawesome/free-solid-svg-icons'
 import { Popover, Transition } from '@headlessui/react'
@@ -62,10 +62,24 @@ export const Toolbar = () => {
     executeAst: s.executeAst,
   }))
   useAppMode()
+  const toolbarButtonsRef = useRef<HTMLSpanElement>(null)
+
+  function handleToolbarButtonsWheelEvent(ev: WheelEvent<HTMLSpanElement>) {
+    const span = toolbarButtonsRef.current
+    if (!span) {
+      return
+    }
+
+    span.scrollLeft = span.scrollLeft += ev.deltaY
+  }
 
   function ToolbarButtons({ className }: React.HTMLAttributes<HTMLElement>) {
     return (
-      <span className={styles.toolbarButtons + ' ' + className}>
+      <span
+        ref={toolbarButtonsRef}
+        onWheel={handleToolbarButtonsWheelEvent}
+        className={styles.toolbarButtons + ' ' + className}
+      >
         {guiMode.mode === 'default' && (
           <button
             onClick={() => {

src/components/AvailableVarsHelpers.tsx

@@ -91,11 +91,14 @@ export function useCalc({
   newVariableInsertIndex: number
   setNewVariableName: (a: string) => void
 } {
-  const { ast, programMemory, selectionRange } = useStore((s) => ({
-    ast: s.ast,
-    programMemory: s.programMemory,
-    selectionRange: s.selectionRanges.codeBasedSelections[0].range,
-  }))
+  const { ast, programMemory, selectionRange, defaultPlanes } = useStore(
+    (s) => ({
+      ast: s.ast,
+      programMemory: s.programMemory,
+      selectionRange: s.selectionRanges.codeBasedSelections[0].range,
+      defaultPlanes: s.defaultPlanes,
+    })
+  )
   const inputRef = useRef<HTMLInputElement>(null)
   const [availableVarInfo, setAvailableVarInfo] = useState<
     ReturnType<typeof findAllPreviousVariables>
@@ -143,19 +146,22 @@ export function useCalc({
       availableVarInfo.variables.forEach(({ key, value }) => {
         _programMem.root[key] = { type: 'userVal', value, __meta: [] }
       })
-      executor(ast, _programMem, engineCommandManager).then((programMemory) => {
-        const resultDeclaration = ast.body.find(
-          (a) =>
-            a.type === 'VariableDeclaration' &&
-            a.declarations?.[0]?.id?.name === '__result__'
-        )
-        const init =
-          resultDeclaration?.type === 'VariableDeclaration' &&
-          resultDeclaration?.declarations?.[0]?.init
-        const result = programMemory?.root?.__result__?.value
-        setCalcResult(typeof result === 'number' ? String(result) : 'NAN')
-        init && setValueNode(init)
-      })
+      if (!defaultPlanes) return
+      executor(ast, _programMem, engineCommandManager, defaultPlanes!).then(
+        (programMemory) => {
+          const resultDeclaration = ast.body.find(
+            (a) =>
+              a.type === 'VariableDeclaration' &&
+              a.declarations?.[0]?.id?.name === '__result__'
+          )
+          const init =
+            resultDeclaration?.type === 'VariableDeclaration' &&
+            resultDeclaration?.declarations?.[0]?.init
+          const result = programMemory?.root?.__result__?.value
+          setCalcResult(typeof result === 'number' ? String(result) : 'NAN')
+          init && setValueNode(init)
+        }
+      )
     } catch (e) {
       setCalcResult('NAN')
       setValueNode(null)

src/components/ErrorPage.tsx

@@ -47,11 +47,9 @@ export const ErrorPage = () => {
             Clear storage
           </ActionButton>
           <ActionButton
-            Element="link"
+            Element="externalLink"
             icon={{ icon: faBug }}
-            target="_blank"
-            rel="noopener noreferrer"
-            to="https://discord.com/channels/915388055236509727/1138967922614743060"
+            to="https://github.com/KittyCAD/modeling-app/issues/new"
           >
             Report Bug
           </ActionButton>

src/components/MemoryPanel.test.tsx

@@ -14,12 +14,14 @@ describe('processMemory', () => {
   }
   const otherVar = myFn(5)
 
-  const theExtrude = startSketchAt([0, 0])
+  const theExtrude = startSketchOn('XY')
+    |> startProfileAt([0, 0], %)
     |> lineTo([-2.4, myVar], %)
     |> lineTo([-0.76, otherVar], %)
     |> extrude(4, %)
 
-  const theSketch = startSketchAt([0, 0])
+  const theSketch = startSketchOn('XY')
+    |> startProfileAt([0, 0], %)
     |> lineTo([-3.35, 0.17], %)
     |> lineTo([0.98, 5.16], %)
     |> lineTo([2.15, 4.32], %)

src/components/Stream.tsx

@@ -46,6 +46,8 @@ export const Stream = ({ className = '' }) => {
     updateAst,
     setGuiMode,
     programMemory,
+    defaultPlanes,
+    currentPlane,
   } = useStore((s) => ({
     mediaStream: s.mediaStream,
     setButtonDownInStream: s.setButtonDownInStream,
@@ -59,6 +61,8 @@ export const Stream = ({ className = '' }) => {
     updateAst: s.updateAst,
     setGuiMode: s.setGuiMode,
     programMemory: s.programMemory,
+    defaultPlanes: s.defaultPlanes,
+    currentPlane: s.currentPlane,
   }))
   const {
     settings: {
@@ -252,10 +256,26 @@ export const Stream = ({ className = '' }) => {
 
         let engineId = guiMode.pathId
 
+        // Get the current plane string for plane we are on.
+        let currentPlaneString = ''
+        if (currentPlane === defaultPlanes?.xy) {
+          currentPlaneString = 'XY'
+        } else if (currentPlane === defaultPlanes?.yz) {
+          currentPlaneString = 'YZ'
+        } else if (currentPlane === defaultPlanes?.xz) {
+          currentPlaneString = 'XZ'
+        }
+
+        // Do not supporting editing/moving lines on a non-default plane.
+        // Eventually we can support this but for now we will just throw an
+        // error.
+        if (currentPlaneString === '') return
+
         const updatedAst: Program = await modifyAstForSketch(
           engineCommandManager,
           ast,
           variableName,
+          currentPlaneString,
           engineId
         )
 
@@ -282,8 +302,46 @@ export const Stream = ({ className = '' }) => {
         })
         const coords: { x: number; y: number }[] =
           curve.data.data.control_points
+
+        // We need the normal for the plane we are on.
+        const plane = await engineCommandManager.sendSceneCommand({
+          type: 'modeling_cmd_req',
+          cmd_id: uuidv4(),
+          cmd: {
+            type: 'get_sketch_mode_plane',
+          },
+        })
+        const z_axis = plane.data.data.z_axis
+
+        // Get the current axis.
+        let currentAxis: 'xy' | 'xz' | 'yz' | '-xy' | '-xz' | '-yz' | null =
+          null
+        if (currentPlane === defaultPlanes?.xy) {
+          if (z_axis.z === -1) {
+            currentAxis = '-xy'
+          } else {
+            currentAxis = 'xy'
+          }
+        } else if (currentPlane === defaultPlanes?.yz) {
+          if (z_axis.x === -1) {
+            currentAxis = '-yz'
+          } else {
+            currentAxis = 'yz'
+          }
+        } else if (currentPlane === defaultPlanes?.xz) {
+          if (z_axis.y === -1) {
+            currentAxis = '-xz'
+          } else {
+            currentAxis = 'xz'
+          }
+        }
+
+        // Do not support starting a new sketch on a non-default plane.
+        if (!currentAxis) return
+
         const _addStartSketch = addStartSketch(
           ast,
+          currentAxis,
           [roundOff(coords[0].x), roundOff(coords[0].y)],
           [
             roundOff(coords[1].x - coords[0].x),

src/components/UserSidebarMenu.test.tsx

@@ -1,6 +1,11 @@
 import { fireEvent, render, screen } from '@testing-library/react'
 import UserSidebarMenu from './UserSidebarMenu'
-import { BrowserRouter } from 'react-router-dom'
+import {
+  Route,
+  RouterProvider,
+  createMemoryRouter,
+  createRoutesFromElements,
+} from 'react-router-dom'
 import { Models } from '@kittycad/lib'
 import { GlobalStateProvider } from './GlobalStateProvider'
 import CommandBarProvider from './CommandBar'
@@ -93,11 +98,24 @@ describe('UserSidebarMenu tests', () => {
 
 function TestWrap({ children }: { children: React.ReactNode }) {
   // wrap in router and xState context
-  return (
-    <BrowserRouter>
-      <CommandBarProvider>
-        <GlobalStateProvider>{children}</GlobalStateProvider>
-      </CommandBarProvider>
-    </BrowserRouter>
+  // We have to use a memory router in the testing environment,
+  // and we have to use the createMemoryRouter function instead of <MemoryRouter /> as of react-router v6.4:
+  // https://reactrouter.com/en/6.16.0/routers/picking-a-router#using-v64-data-apis
+  const router = createMemoryRouter(
+    createRoutesFromElements(
+      <Route
+        path="/file/:id"
+        element={
+          <CommandBarProvider>
+            <GlobalStateProvider>{children}</GlobalStateProvider>
+          </CommandBarProvider>
+        }
+      />
+    ),
+    {
+      initialEntries: ['/file/new'],
+      initialIndex: 0,
+    }
   )
+  return <RouterProvider router={router} />
 }

src/components/UserSidebarMenu.tsx

@@ -10,14 +10,15 @@ import { faGithub } from '@fortawesome/free-brands-svg-icons'
 import { useLocation, useNavigate } from 'react-router-dom'
 import { Fragment, useState } from 'react'
 import { paths } from '../Router'
-import makeUrlPathRelative from '../lib/makeUrlPathRelative'
 import { Models } from '@kittycad/lib'
 import { useGlobalStateContext } from 'hooks/useGlobalStateContext'
+import { useAbsoluteFilePath } from 'hooks/useAbsoluteFilePath'
 
 type User = Models['User_type']
 
 const UserSidebarMenu = ({ user }: { user?: User }) => {
   const location = useLocation()
+  const filePath = useAbsoluteFilePath()
   const displayedName = getDisplayName(user)
   const [imageLoadFailed, setImageLoadFailed] = useState(false)
   const navigate = useNavigate()
@@ -132,11 +133,10 @@ const UserSidebarMenu = ({ user }: { user?: User }) => {
                     // since /settings is a nested route the sidebar doesn't close
                     // automatically when navigating to it
                     close()
-                    navigate(
-                      (location.pathname.endsWith('/')
-                        ? location.pathname.slice(0, -1)
-                        : location.pathname) + paths.SETTINGS
-                    )
+                    const targetPath = location.pathname.includes(paths.FILE)
+                      ? filePath + paths.SETTINGS
+                      : paths.HOME + paths.SETTINGS
+                    navigate(targetPath)
                   }}
                 >
                   Settings

src/hooks/useAbsoluteFilePath.ts

@@ -0,0 +1,12 @@
+import { BROWSER_FILE_NAME, IndexLoaderData, paths } from 'Router'
+import { useRouteLoaderData } from 'react-router-dom'
+
+export function useAbsoluteFilePath() {
+  const routeData = useRouteLoaderData(paths.FILE) as IndexLoaderData
+
+  return (
+    paths.FILE +
+    '/' +
+    encodeURIComponent(routeData?.project?.path || BROWSER_FILE_NAME)
+  )
+}

src/hooks/useAppMode.ts

@@ -2,30 +2,37 @@
 // Once we have xState this should be removed
 
 import { useStore, Selections } from 'useStore'
-import { useEffect, useState } from 'react'
+import { useEffect } from 'react'
 import { v4 as uuidv4 } from 'uuid'
 import { ArtifactMap, EngineCommandManager } from 'lang/std/engineConnection'
 import { Models } from '@kittycad/lib/dist/types/src'
 import { isReducedMotion } from 'lang/util'
 import { isOverlap } from 'lib/utils'
 import { engineCommandManager } from '../lang/std/engineConnection'
-
-interface DefaultPlanes {
-  xy: string
-  // TODO re-enable
-  // yz: string
-  // xz: string
-}
+import { DefaultPlanes } from '../wasm-lib/kcl/bindings/DefaultPlanes'
+import { getNodeFromPath } from '../lang/queryAst'
+import { CallExpression, PipeExpression } from '../lang/wasm'
 
 export function useAppMode() {
-  const { guiMode, setGuiMode, selectionRanges, selectionRangeTypeMap } =
-    useStore((s) => ({
-      guiMode: s.guiMode,
-      setGuiMode: s.setGuiMode,
-      selectionRanges: s.selectionRanges,
-      selectionRangeTypeMap: s.selectionRangeTypeMap,
-    }))
-  const [defaultPlanes, setDefaultPlanes] = useState<DefaultPlanes | null>(null)
+  const {
+    guiMode,
+    setGuiMode,
+    selectionRanges,
+    selectionRangeTypeMap,
+    defaultPlanes,
+    setDefaultPlanes,
+    setCurrentPlane,
+    ast,
+  } = useStore((s) => ({
+    guiMode: s.guiMode,
+    setGuiMode: s.setGuiMode,
+    selectionRanges: s.selectionRanges,
+    selectionRangeTypeMap: s.selectionRangeTypeMap,
+    defaultPlanes: s.defaultPlanes,
+    setDefaultPlanes: s.setDefaultPlanes,
+    setCurrentPlane: s.setCurrentPlane,
+    ast: s.ast,
+  }))
   useEffect(() => {
     if (
       guiMode.mode === 'sketch' &&
@@ -35,8 +42,10 @@ export function useAppMode() {
       const createAndShowPlanes = async () => {
         let localDefaultPlanes: DefaultPlanes
         if (!defaultPlanes) {
-          localDefaultPlanes = await initDefaultPlanes(engineCommandManager)
-          setDefaultPlanes(localDefaultPlanes)
+          const newDefaultPlanes = await initDefaultPlanes(engineCommandManager)
+          if (!newDefaultPlanes) return
+          setDefaultPlanes(newDefaultPlanes)
+          localDefaultPlanes = newDefaultPlanes
         } else {
           localDefaultPlanes = defaultPlanes
         }
@@ -52,20 +61,52 @@ export function useAppMode() {
       const enableSketchMode = async () => {
         let localDefaultPlanes: DefaultPlanes
         if (!defaultPlanes) {
-          localDefaultPlanes = await initDefaultPlanes(engineCommandManager)
-          setDefaultPlanes(localDefaultPlanes)
+          const newDefaultPlanes = await initDefaultPlanes(engineCommandManager)
+          if (!newDefaultPlanes) return
+          setDefaultPlanes(newDefaultPlanes)
+          localDefaultPlanes = newDefaultPlanes
         } else {
           localDefaultPlanes = defaultPlanes
         }
         setDefaultPlanesHidden(engineCommandManager, localDefaultPlanes, true)
-        // TODO figure out the plane to use based on the sketch
-        // maybe it's easier to make a new plane than rely on the defaults
+
+        const pipeExpression = getNodeFromPath<PipeExpression>(
+          ast,
+          guiMode.pathToNode,
+          'PipeExpression'
+        ).node
+        if (pipeExpression.type !== 'PipeExpression') return /// bad bad bad
+        const sketchCallExpression = pipeExpression.body.find(
+          (e) =>
+            e.type === 'CallExpression' && e.callee.name === 'startSketchOn'
+        ) as CallExpression
+        if (!sketchCallExpression) return // also bad bad bad
+        const firstArg = sketchCallExpression.arguments[0]
+        let planeId = ''
+        if (firstArg.type === 'Literal' && firstArg.value) {
+          const planeStrCleaned = firstArg.value
+            .toString()
+            .toLowerCase()
+            .replace('-', '')
+          if (
+            planeStrCleaned === 'xy' ||
+            planeStrCleaned === 'xz' ||
+            planeStrCleaned === 'yz'
+          ) {
+            planeId = localDefaultPlanes[planeStrCleaned]
+          }
+        }
+
+        if (!planeId) return // they are on some non default plane, which we don't support yet
+
+        setCurrentPlane(planeId)
+
         await engineCommandManager.sendSceneCommand({
           type: 'modeling_cmd_req',
           cmd_id: uuidv4(),
           cmd: {
             type: 'sketch_mode_enable',
-            plane_id: localDefaultPlanes.xy,
+            plane_id: planeId,
             ortho: true,
             animated: !isReducedMotion(),
           },
@@ -139,6 +180,7 @@ export function useAppMode() {
           // user clicked something else in the scene
           return
         }
+        setCurrentPlane(data.entity_id)
         const sketchModeResponse = await engineCommandManager.sendSceneCommand({
           type: 'modeling_cmd_req',
           cmd_id: uuidv4(),
@@ -194,10 +236,12 @@ async function createPlane(
     x_axis,
     y_axis,
     color,
+    hidden,
   }: {
     x_axis: Models['Point3d_type']
     y_axis: Models['Point3d_type']
     color: Models['Color_type']
+    hidden: boolean
   }
 ) {
   const planeId = uuidv4()
@@ -210,6 +254,7 @@ async function createPlane(
       x_axis,
       y_axis,
       clobber: false,
+      hide: hidden,
     },
     cmd_id: planeId,
   })
@@ -225,61 +270,82 @@ async function createPlane(
   return planeId
 }
 
-function setDefaultPlanesHidden(
+export function setDefaultPlanesHidden(
   engineCommandManager: EngineCommandManager,
   defaultPlanes: DefaultPlanes,
   hidden: boolean
 ) {
   Object.values(defaultPlanes).forEach((planeId) => {
-    engineCommandManager.sendSceneCommand({
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: {
-        type: 'object_visible',
-        object_id: planeId,
-        hidden: hidden,
-      },
-    })
+    hidePlane(engineCommandManager, planeId, hidden)
   })
 }
 
-async function initDefaultPlanes(
-  engineCommandManager: EngineCommandManager
-): Promise<DefaultPlanes> {
+function hidePlane(
+  engineCommandManager: EngineCommandManager,
+  planeId: string,
+  hidden: boolean
+) {
+  engineCommandManager.sendSceneCommand({
+    type: 'modeling_cmd_req',
+    cmd_id: uuidv4(),
+    cmd: {
+      type: 'object_visible',
+      object_id: planeId,
+      hidden: hidden,
+    },
+  })
+}
+
+export async function initDefaultPlanes(
+  engineCommandManager: EngineCommandManager,
+  hidePlanes?: boolean
+): Promise<DefaultPlanes | null> {
+  if (!engineCommandManager.engineConnection?.isReady()) {
+    return null
+  }
   const xy = await createPlane(engineCommandManager, {
     x_axis: { x: 1, y: 0, z: 0 },
     y_axis: { x: 0, y: 1, z: 0 },
     color: { r: 0.7, g: 0.28, b: 0.28, a: 0.4 },
+    hidden: hidePlanes ? true : false,
   })
-  // TODO re-enable
-  // const yz = createPlane(engineCommandManager, {
-  //   x_axis: { x: 0, y: 1, z: 0 },
-  //   y_axis: { x: 0, y: 0, z: 1 },
-  //   color: { r: 0.28, g: 0.7, b: 0.28, a: 0.4 },
-  // })
-  // const xz = createPlane(engineCommandManager, {
-  //   x_axis: { x: 1, y: 0, z: 0 },
-  //   y_axis: { x: 0, y: 0, z: 1 },
-  //   color: { r: 0.28, g: 0.28, b: 0.7, a: 0.4 },
-  // })
-  return { xy }
+  if (hidePlanes) {
+    hidePlane(engineCommandManager, xy, true)
+  }
+  const yz = await createPlane(engineCommandManager, {
+    x_axis: { x: 0, y: 1, z: 0 },
+    y_axis: { x: 0, y: 0, z: 1 },
+    color: { r: 0.28, g: 0.7, b: 0.28, a: 0.4 },
+    hidden: hidePlanes ? true : false,
+  })
+  if (hidePlanes) {
+    hidePlane(engineCommandManager, yz, true)
+  }
+  const xz = await createPlane(engineCommandManager, {
+    x_axis: { x: 1, y: 0, z: 0 },
+    y_axis: { x: 0, y: 0, z: 1 },
+    color: { r: 0.28, g: 0.28, b: 0.7, a: 0.4 },
+    hidden: hidePlanes ? true : false,
+  })
+  return { xy, yz, xz }
 }
 
 function isCursorInSketchCommandRange(
   artifactMap: ArtifactMap,
   selectionRanges: Selections
 ): string | false {
-  const overlapingEntries = Object.entries(artifactMap || {}).filter(
-    ([id, artifact]) =>
-      selectionRanges.codeBasedSelections.some(
-        (selection) =>
-          Array.isArray(selection?.range) &&
-          Array.isArray(artifact?.range) &&
-          isOverlap(selection.range, artifact.range) &&
-          (artifact.commandType === 'start_path' ||
-            artifact.commandType === 'extend_path' ||
-            artifact.commandType === 'close_path')
-      )
+  const overlapingEntries: [string, ArtifactMap[string]][] = Object.entries(
+    artifactMap
+  ).filter(([id, artifact]: [string, ArtifactMap[string]]) =>
+    selectionRanges.codeBasedSelections.some(
+      (selection) =>
+        Array.isArray(selection?.range) &&
+        Array.isArray(artifact?.range) &&
+        isOverlap(selection.range, artifact.range) &&
+        (artifact.commandType === 'start_path' ||
+          artifact.commandType === 'extend_path' ||
+          artifact.commandType === 'close_path')
+    )
   )
   return overlapingEntries.length && overlapingEntries[0][1].parentId
     ? overlapingEntries[0][1].parentId

src/hooks/useSetupEngineManager.ts

@@ -3,7 +3,6 @@ import { _executor } from '../lang/wasm'
 import { useStore } from '../useStore'
 import { engineCommandManager } from '../lang/std/engineConnection'
 import { deferExecution } from 'lib/utils'
-import { v4 as uuidv4 } from 'uuid'
 
 export function useSetupEngineManager(
   streamRef: React.RefObject<HTMLDivElement>,

src/lang/artifact.test.ts

@@ -7,7 +7,8 @@ describe('testing artifacts', () => {
   // Enable rotations #152
   test('sketch artifacts', async () => {
     const code = `
-const mySketch001 = startSketchAt([0, 0])
+const mySketch001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo([-1.59, -1.54], %)
   |> lineTo([0.46, -5.82], %)
   // |> rx(45, %)
@@ -27,7 +28,7 @@ show(mySketch001)`
           name: '',
           __geoMeta: {
             id: expect.any(String),
-            sourceRange: [21, 42],
+            sourceRange: [46, 71],
           },
         },
         value: [
@@ -37,7 +38,7 @@ show(mySketch001)`
             to: [-1.59, -1.54],
             from: [0, 0],
             __geoMeta: {
-              sourceRange: [48, 73],
+              sourceRange: [77, 102],
               id: expect.any(String),
             },
           },
@@ -47,7 +48,7 @@ show(mySketch001)`
             from: [-1.59, -1.54],
             name: '',
             __geoMeta: {
-              sourceRange: [79, 103],
+              sourceRange: [108, 132],
               id: expect.any(String),
             },
           },
@@ -55,14 +56,16 @@ show(mySketch001)`
         position: [0, 0, 0],
         rotation: [0, 0, 0, 1],
         id: expect.any(String),
-        __meta: [{ sourceRange: [21, 42] }],
+        planeId: expect.any(String),
+        __meta: [{ sourceRange: [46, 71] }],
       },
     ])
   })
   test('extrude artifacts', async () => {
     // Enable rotations #152
     const code = `
-const mySketch001 = startSketchAt([0, 0])
+const mySketch001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo([-1.59, -1.54], %)
   |> lineTo([0.46, -5.82], %)
   // |> rx(45, %)
@@ -82,7 +85,7 @@ show(mySketch001)`
         height: 2,
         position: [0, 0, 0],
         rotation: [0, 0, 0, 1],
-        __meta: [{ sourceRange: [21, 42] }],
+        __meta: [{ sourceRange: [46, 71] }],
       },
     ])
   })
@@ -90,7 +93,8 @@ show(mySketch001)`
     // Enable rotations #152
     // TODO #153 in order for getExtrudeWallTransform to work we need to query the engine for the location of a face.
     const code = `
-const sk1 = startSketchAt([0, 0])
+const sk1 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo([-2.5, 0], %)
   |> lineTo({ to: [0, 10], tag: "p" }, %)
   |> lineTo([2.5, 0], %)
@@ -99,7 +103,8 @@ const sk1 = startSketchAt([0, 0])
   // |> ry(5, %)
 const theExtrude = extrude(2, sk1)
 // const theTransf = getExtrudeWallTransform('p', theExtrude)
-const sk2 = startSketchAt([0, 0])
+const sk2 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo([-2.5, 0], %)
   |> lineTo({ to: [0, 3], tag: "p" }, %)
   |> lineTo([2.5, 0], %)
@@ -122,7 +127,7 @@ show(theExtrude, sk2)`
         height: 2,
         position: [0, 0, 0],
         rotation: [0, 0, 0, 1],
-        __meta: [{ sourceRange: [13, 34] }],
+        __meta: [{ sourceRange: [38, 63] }],
       },
       {
         type: 'ExtrudeGroup',
@@ -131,7 +136,7 @@ show(theExtrude, sk2)`
         height: 2,
         position: [0, 0, 0],
         rotation: [0, 0, 0, 1],
-        __meta: [{ sourceRange: [302, 323] }],
+        __meta: [{ sourceRange: [356, 381] }],
       },
     ])
   })

src/lang/executor.test.ts

@@ -41,7 +41,8 @@ const newVar = myVar + 1`
     expect(root.magicNum.value).toBe(69)
   })
   it('sketch declaration', async () => {
-    let code = `const mySketch = startSketchAt([0,0])
+    let code = `const mySketch = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |> lineTo({to: [0,2], tag: "myPath"}, %)
   |> lineTo([2,3], %)
   |> lineTo({ to: [5,-1], tag: "rightPath" }, %)
@@ -57,7 +58,7 @@ show(mySketch)
         to: [0, 2],
         from: [0, 0],
         __geoMeta: {
-          sourceRange: [43, 80],
+          sourceRange: [72, 109],
           id: expect.any(String),
         },
         name: 'myPath',
@@ -68,7 +69,7 @@ show(mySketch)
         from: [0, 2],
         name: '',
         __geoMeta: {
-          sourceRange: [86, 102],
+          sourceRange: [115, 131],
           id: expect.any(String),
         },
       },
@@ -77,7 +78,7 @@ show(mySketch)
         to: [5, -1],
         from: [2, 3],
         __geoMeta: {
-          sourceRange: [108, 151],
+          sourceRange: [137, 180],
           id: expect.any(String),
         },
         name: 'rightPath',
@@ -87,8 +88,8 @@ show(mySketch)
     expect(_return).toEqual([
       {
         type: 'Identifier',
-        start: 174,
-        end: 182,
+        start: 203,
+        end: 211,
         name: 'mySketch',
       },
     ])
@@ -132,7 +133,8 @@ show(mySketch)
   it('execute pipe sketch into call expression', async () => {
     // Enable rotations #152
     const code = [
-      'const mySk1 = startSketchAt([0,0])',
+      "const mySk1 = startSketchOn('XY')",
+      '  |> startProfileAt([0,0], %)',
       '  |> lineTo([1,1], %)',
       '  |> lineTo({to: [0, 1], tag: "myPath"}, %)',
       '  |> lineTo([1,1], %)',
@@ -147,7 +149,7 @@ show(mySketch)
         name: '',
         __geoMeta: {
           id: expect.any(String),
-          sourceRange: [14, 34],
+          sourceRange: [39, 63],
         },
       },
       value: [
@@ -157,7 +159,7 @@ show(mySketch)
           from: [0, 0],
           name: '',
           __geoMeta: {
-            sourceRange: [40, 56],
+            sourceRange: [69, 85],
             id: expect.any(String),
           },
         },
@@ -166,7 +168,7 @@ show(mySketch)
           to: [0, 1],
           from: [1, 1],
           __geoMeta: {
-            sourceRange: [62, 100],
+            sourceRange: [91, 129],
             id: expect.any(String),
           },
           name: 'myPath',
@@ -177,7 +179,7 @@ show(mySketch)
           from: [0, 1],
           name: '',
           __geoMeta: {
-            sourceRange: [106, 122],
+            sourceRange: [135, 151],
             id: expect.any(String),
           },
         },
@@ -185,7 +187,8 @@ show(mySketch)
       position: [0, 0, 0],
       rotation: [0, 0, 0, 1],
       id: expect.any(String),
-      __meta: [{ sourceRange: [14, 34] }],
+      planeId: expect.any(String),
+      __meta: [{ sourceRange: [39, 63] }],
     })
   })
   it('execute array expression', async () => {
@@ -329,7 +332,8 @@ describe('testing math operators', () => {
   })
   it('with unaryExpression in ArrayExpression in CallExpression, checking nothing funny happens when used in a sketch', async () => {
     const code = [
-      'const part001 = startSketchAt([0, 0])',
+      "const part001 = startSketchOn('XY')",
+      '  |> startProfileAt([0, 0], %)',
       '|> line([-2.21, -legLen(5, min(3, 999))], %)',
     ].join('\n')
     const { root } = await exe(code)
@@ -341,7 +345,8 @@ describe('testing math operators', () => {
   it('test that % substitution feeds down CallExp->ArrExp->UnaryExp->CallExp', async () => {
     const code = [
       `const myVar = 3`,
-      `const part001 = startSketchAt([0, 0])`,
+      `const part001 = startSketchOn('XY')`,
+      `  |> startProfileAt([0, 0], %)`,
       `  |> line({ to: [3, 4], tag: 'seg01' }, %)`,
       `  |> line([`,
       `  min(segLen('seg01', %), myVar),`,
@@ -377,7 +382,8 @@ describe('testing math operators', () => {
 describe('Testing Errors', () => {
   it('should throw an error when a variable is not defined', async () => {
     const code = `const myVar = 5
-const theExtrude = startSketchAt([0, 0])
+const theExtrude = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> line([-2.4, 5], %)
   |> line([-0.76], myVarZ, %)
   |> line([5,5], %)
@@ -388,7 +394,7 @@ show(theExtrude)`
       new KCLError(
         'undefined_value',
         'memory item key `myVarZ` is not defined',
-        [[100, 106]]
+        [[129, 135]]
       )
     )
   })

src/lang/modifyAst.test.ts

@@ -109,8 +109,8 @@ describe('Testing addSketchTo', () => {
       'yz'
     )
     const str = recast(result.modifiedAst)
-    expect(str).toBe(`const part001 = startSketchAt('default')
-  |> ry(90, %)
+    expect(str).toBe(`const part001 = startSketchOn('YZ')
+  |> startProfileAt('default', %)
   |> line('default', %)
 show(part001)
 `)
@@ -133,7 +133,8 @@ function giveSketchFnCallTagTestHelper(
 }
 
 describe('Testing giveSketchFnCallTag', () => {
-  const code = `const part001 = startSketchAt([0, 0])
+  const code = `const part001 = startSketchOn('XY')
+|> startProfileAt([0, 0], %)
 |> line([-2.57, -0.13], %)
 |> line([0, 0.83], %)
 |> line([0.82, 0.34], %)
@@ -185,7 +186,8 @@ fn ghi = (x) => {
 const abc = 3
 const identifierGuy = 5
 const yo = 5 + 6
-const part001 = startSketchAt([-1.2, 4.83])
+const part001 = startSketchOn('XY')
+|> startProfileAt([-1.2, 4.83], %)
 |> line([2.8, 0], %)
 |> angledLine([100 + 100, 3.09], %)
 |> angledLine([abc, 3.09], %)

src/lang/modifyAst.ts

@@ -32,21 +32,26 @@ import { isLiteralArrayOrStatic } from './std/sketchcombos'
 
 export function addStartSketch(
   node: Program,
+  axis: 'xy' | 'xz' | 'yz' | '-xy' | '-xz' | '-yz',
   start: [number, number],
   end: [number, number]
 ): { modifiedAst: Program; id: string; pathToNode: PathToNode } {
   const _node = { ...node }
   const _name = findUniqueName(node, 'part')
 
-  const startSketchAt = createCallExpression('startSketchAt', [
+  const startSketchOn = createCallExpressionStdLib('startSketchOn', [
+    createLiteral(axis.toUpperCase()),
+  ])
+  const startProfileAt = createCallExpressionStdLib('startProfileAt', [
     createArrayExpression([createLiteral(start[0]), createLiteral(start[1])]),
+    createPipeSubstitution(),
   ])
   const initialLineTo = createCallExpression('line', [
     createArrayExpression([createLiteral(end[0]), createLiteral(end[1])]),
     createPipeSubstitution(),
   ])
 
-  const pipeBody = [startSketchAt, initialLineTo]
+  const pipeBody = [startSketchOn, startProfileAt, initialLineTo]
 
   const variableDeclaration = createVariableDeclaration(
     _name,
@@ -79,11 +84,11 @@ export function addSketchTo(
   const _node = { ...node }
   const _name = name || findUniqueName(node, 'part')
 
-  const startSketchAt = createCallExpressionStdLib('startSketchAt', [
-    createLiteral('default'),
+  const startSketchOn = createCallExpressionStdLib('startSketchOn', [
+    createLiteral(axis.toUpperCase()),
   ])
-  const rotate = createCallExpression(axis === 'xz' ? 'rx' : 'ry', [
-    createLiteral(90),
+  const startProfileAt = createCallExpressionStdLib('startProfileAt', [
+    createLiteral('default'),
     createPipeSubstitution(),
   ])
   const initialLineTo = createCallExpressionStdLib('line', [
@@ -91,10 +96,7 @@ export function addSketchTo(
     createPipeSubstitution(),
   ])
 
-  const pipeBody =
-    axis !== 'xy'
-      ? [startSketchAt, rotate, initialLineTo]
-      : [startSketchAt, initialLineTo]
+  const pipeBody = [startSketchOn, startProfileAt, initialLineTo]
 
   const variableDeclaration = createVariableDeclaration(
     _name,

src/lang/queryAst.test.ts

@@ -26,7 +26,8 @@ const halfArmAngle = armAngle / 2
 const arrExpShouldNotBeIncluded = [1, 2, 3]
 const objExpShouldNotBeIncluded = { a: 1, b: 2, c: 3 }
 
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> yLineTo(1, %)
   |> xLine(3.84, %) // selection-range-7ish-before-this
 
@@ -57,7 +58,8 @@ show(part001)`
 })
 
 describe('testing argIsNotIdentifier', () => {
-  const code = `const part001 = startSketchAt([-1.2, 4.83])
+  const code = `const part001 = startSketchOn('XY')
+|> startProfileAt([-1.2, 4.83], %)
 |> line([2.8, 0], %)
 |> angledLine([100 + 100, 3.09], %)
 |> angledLine([abc, 3.09], %)
@@ -194,7 +196,8 @@ show(part001)`
 })
 
 describe('testing getNodePathFromSourceRange', () => {
-  const code = `const part001 = startSketchAt([0.39, -0.05])
+  const code = `const part001 = startSketchOn('XY')
+  |> startProfileAt([0.39, -0.05], %)
   |> line([0.94, 2.61], %)
   |> line([-0.21, -1.4], %)
 show(part001)`
@@ -210,7 +213,7 @@ show(part001)`
       [0, 'index'],
       ['init', ''],
       ['body', 'PipeExpression'],
-      [1, 'index'],
+      [2, 'index'],
     ])
   })
   it('finds the last line when cursor is put at the end', () => {
@@ -225,7 +228,7 @@ show(part001)`
       [0, 'index'],
       ['init', ''],
       ['body', 'PipeExpression'],
-      [2, 'index'],
+      [3, 'index'],
     ]
     expect(result).toEqual(expected)
     // expect similar result for start of line

src/lang/std/engineConnection.ts

@@ -725,7 +725,11 @@ export class EngineCommandManager {
               message.request_id
             ) {
               this.handleModelingCommand(message.resp, message.request_id)
-            } else if (!message.success && message.request_id) {
+            } else if (
+              !message.success &&
+              message.request_id &&
+              this.artifactMap[message.request_id]
+            ) {
               this.handleFailedModelingCommand(message)
             }
           }

src/lang/std/sketch.test.ts

@@ -96,7 +96,8 @@ describe('testing changeSketchArguments', () => {
   const lineAfterChange = 'lineTo([2, 3], %)'
   test('changeSketchArguments', async () => {
     // Enable rotations #152
-    const genCode = (line: string) => `const mySketch001 = startSketchAt([0, 0])
+    const genCode = (line: string) => `const mySketch001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> ${line}
   |> lineTo([0.46, -5.82], %)
 // |> rx(45, %)
@@ -137,7 +138,8 @@ describe('testing addNewSketchLn', () => {
   test('addNewSketchLn', async () => {
     // Enable rotations #152
     const code = `
-const mySketch001 = startSketchAt([0, 0])
+const mySketch001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   // |> rx(45, %)
   |> lineTo([-1.59, -1.54], %)
   |> lineTo([0.46, -5.82], %)
@@ -145,7 +147,7 @@ show(mySketch001)`
     const ast = parse(code)
     const programMemory = await enginelessExecutor(ast)
     const sourceStart = code.indexOf(lineToChange)
-    expect(sourceStart).toBe(66)
+    expect(sourceStart).toBe(95)
     let { modifiedAst } = addNewSketchLn({
       node: ast,
       programMemory,
@@ -160,7 +162,8 @@ show(mySketch001)`
       ],
     })
     // Enable rotations #152
-    let expectedCode = `const mySketch001 = startSketchAt([0, 0])
+    let expectedCode = `const mySketch001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   // |> rx(45, %)
   |> lineTo([-1.59, -1.54], %)
   |> lineTo([0.46, -5.82], %)
@@ -181,7 +184,8 @@ show(mySketch001)
       ],
     })
 
-    expectedCode = `const mySketch001 = startSketchAt([0, 0])
+    expectedCode = `const mySketch001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   // |> rx(45, %)
   |> lineTo([-1.59, -1.54], %)
   |> lineTo([0.46, -5.82], %)
@@ -196,7 +200,8 @@ describe('testing addTagForSketchOnFace', () => {
   it('needs to be in it', async () => {
     const originalLine = 'lineTo([-1.59, -1.54], %)'
     // Enable rotations #152
-    const genCode = (line: string) => `const mySketch001 = startSketchAt([0, 0])
+    const genCode = (line: string) => `const mySketch001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   // |> rx(45, %)
   |> ${line}
   |> lineTo([0.46, -5.82], %)

src/lang/std/sketchConstraints.test.ts

@@ -52,7 +52,8 @@ async function testingSwapSketchFnCall({
 
 describe('testing swaping out sketch calls with xLine/xLineTo', () => {
   const bigExampleArr = [
-    `const part001 = startSketchAt([0, 0])`,
+    `const part001 = startSketchOn('XY')`,
+    `  |> startProfileAt([0, 0], %)`,
     `  |> lineTo({ to: [1, 1], tag: 'abc1' }, %)`,
     `  |> line({ to: [-2.04, -0.7], tag: 'abc2' }, %)`,
     `  |> angledLine({`,
@@ -277,7 +278,8 @@ describe('testing swaping out sketch calls with xLine/xLineTo while keeping vari
     `const angledLineOfYLengthY = 0.89`,
     `const angledLineToXx = -1.86`,
     `const angledLineToYy = -0.76`,
-    `const part001 = startSketchAt([0, 0])`,
+    `const part001 = startSketchOn('XY')`,
+    `  |> startProfileAt([0, 0], %)`,
     // `  |> rx(90, %)`,
     `  |> lineTo([1, 1], %)`,
     `  |> line([lineX, 2.13], %)`,
@@ -371,7 +373,8 @@ describe('testing swaping out sketch calls with xLine/xLineTo while keeping vari
 
 describe('testing getSketchSegmentIndexFromSourceRange', () => {
   const code = `
-const part001 = startSketchAt([0, 0.04]) // segment-in-start
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0.04], %) // segment-in-start
   |> line([0, 0.4], %)
   |> xLine(3.48, %)
   |> line([2.14, 1.35], %) // normal-segment

src/lang/std/sketchcombos.test.ts

@@ -92,7 +92,8 @@ const myVar2 = 5
 const myVar3 = 6
 const myAng = 40
 const myAng2 = 134
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> line([1, 3.82], %) // ln-should-get-tag
   |> lineTo([myVar, 1], %) // ln-lineTo-xAbsolute should use angleToMatchLengthX helper
   |> lineTo([1, myVar], %) // ln-lineTo-yAbsolute should use angleToMatchLengthY helper
@@ -128,7 +129,8 @@ const myVar2 = 5
 const myVar3 = 6
 const myAng = 40
 const myAng2 = 134
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> line({ to: [1, 3.82], tag: 'seg01' }, %) // ln-should-get-tag
   |> angledLineToX([
        -angleToMatchLengthX('seg01', myVar, %),
@@ -231,7 +233,8 @@ describe('testing transformAstForSketchLines for vertical and horizontal constra
   const inputScript = `const myVar = 2
 const myVar2 = 12
 const myVar3 = -10
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo([1, 1], %)
   |> line([-6.28, 1.4], %) // select for horizontal constraint 1
   |> line([-1.07, myVar], %) // select for vertical constraint 1
@@ -259,7 +262,8 @@ show(part001)
     const expectModifiedScript = `const myVar = 2
 const myVar2 = 12
 const myVar3 = -10
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo([1, 1], %)
   |> xLine(-6.28, %) // select for horizontal constraint 1
   |> line([-1.07, myVar], %) // select for vertical constraint 1
@@ -317,7 +321,8 @@ show(part001)
     const expectModifiedScript = `const myVar = 2
 const myVar2 = 12
 const myVar3 = -10
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo([1, 1], %)
   |> line([-6.28, 1.4], %) // select for horizontal constraint 1
   |> yLine(myVar, %) // select for vertical constraint 1
@@ -376,7 +381,8 @@ show(part001)
 describe('testing transformAstForSketchLines for vertical and horizontal distance constraints', () => {
   describe('testing setHorzDistance for line', () => {
     const inputScript = `const myVar = 1
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> line([0.31, 1.67], %) // base selection
   |> line([0.45, 1.46], %)
   |> line([0.45, 1.46], %) // free
@@ -477,7 +483,8 @@ const baseThickHalf = baseThick / 2
 const halfHeight = totalHeight / 2
 const halfArmAngle = armAngle / 2
 
-const part001 = startSketchAt([-0.01, -0.05])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([-0.01, -0.05], %)
   |> line([0.01, 0.94 + 0], %) // partial
   |> xLine(3.03, %) // partial
   |> angledLine({

src/lang/std/std.test.ts

@@ -5,7 +5,8 @@ beforeAll(() => initPromise)
 
 describe('testing angledLineThatIntersects', () => {
   it('angledLineThatIntersects should intersect with another line', async () => {
-    const code = (offset: string) => `const part001 = startSketchAt([0, 0])
+    const code = (offset: string) => `const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo({to:[2, 2], tag: "yo"}, %)
   |> lineTo([3, 1], %)
   |> angledLineThatIntersects({

src/lang/wasm.ts

@@ -16,6 +16,7 @@ import { ProgramReturn } from '../wasm-lib/kcl/bindings/ProgramReturn'
 import { MemoryItem } from '../wasm-lib/kcl/bindings/MemoryItem'
 import type { Program } from '../wasm-lib/kcl/bindings/Program'
 import type { Token } from '../wasm-lib/kcl/bindings/Token'
+import { DefaultPlanes } from '../wasm-lib/kcl/bindings/DefaultPlanes'
 
 export type { Program } from '../wasm-lib/kcl/bindings/Program'
 export type { Value } from '../wasm-lib/kcl/bindings/Value'
@@ -118,6 +119,7 @@ export const executor = async (
   node: Program,
   programMemory: ProgramMemory = { root: {}, return: null },
   engineCommandManager: EngineCommandManager,
+  planes: DefaultPlanes,
   // work around while the gemotry is still be stored on the frontend
   // will be removed when the stream UI is added.
   tempMapCallback: (a: {
@@ -129,7 +131,8 @@ export const executor = async (
   const _programMemory = await _executor(
     node,
     programMemory,
-    engineCommandManager
+    engineCommandManager,
+    planes
   )
   const { artifactMap, sourceRangeMap } =
     await engineCommandManager.waitForAllCommands(node, _programMemory)
@@ -142,13 +145,15 @@ export const executor = async (
 export const _executor = async (
   node: Program,
   programMemory: ProgramMemory = { root: {}, return: null },
-  engineCommandManager: EngineCommandManager
+  engineCommandManager: EngineCommandManager,
+  planes: DefaultPlanes
 ): Promise<ProgramMemory> => {
   try {
     const memory: ProgramMemory = await execute_wasm(
       JSON.stringify(node),
       JSON.stringify(programMemory),
-      engineCommandManager
+      engineCommandManager,
+      JSON.stringify(planes)
     )
     return memory
   } catch (e: any) {
@@ -190,6 +195,7 @@ export const modifyAstForSketch = async (
   engineCommandManager: EngineCommandManager,
   ast: Program,
   variableName: string,
+  currentPlane: string,
   engineId: string
 ): Promise<Program> => {
   try {
@@ -197,6 +203,7 @@ export const modifyAstForSketch = async (
       engineCommandManager,
       JSON.stringify(ast),
       variableName,
+      JSON.stringify(currentPlane),
       engineId
     )
 

src/lib/exampleKcl.ts

@@ -8,7 +8,8 @@ const filletR = thickness * 2
 const shelfMountL = 9
 const wallMountL = 8
 
-const bracket = startSketchAt([0, 0])
+const bracket = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> line([0, wallMountL], %)
   |> tangentalArc({
     radius: filletR,

src/lib/testHelpers.ts

@@ -4,6 +4,7 @@ import {
   EngineCommand,
 } from '../lang/std/engineConnection'
 import { Models } from '@kittycad/lib'
+import { v4 as uuidv4 } from 'uuid'
 
 type WebSocketResponse = Models['OkWebSocketResponseData_type']
 
@@ -64,7 +65,11 @@ export async function enginelessExecutor(
   }) as any as EngineCommandManager
   await mockEngineCommandManager.waitForReady
   mockEngineCommandManager.startNewSession()
-  const programMemory = await _executor(ast, pm, mockEngineCommandManager)
+  const programMemory = await _executor(ast, pm, mockEngineCommandManager, {
+    xy: uuidv4(),
+    yz: uuidv4(),
+    xz: uuidv4(),
+  })
   await mockEngineCommandManager.waitForAllCommands()
   return programMemory
 }
@@ -83,7 +88,11 @@ export async function executor(
   })
   await engineCommandManager.waitForReady
   engineCommandManager.startNewSession()
-  const programMemory = await _executor(ast, pm, engineCommandManager)
+  const programMemory = await _executor(ast, pm, engineCommandManager, {
+    xy: uuidv4(),
+    yz: uuidv4(),
+    xz: uuidv4(),
+  })
   await engineCommandManager.waitForAllCommands(ast, programMemory)
   return programMemory
 }

src/routes/Onboarding/Introduction.tsx

@@ -1,6 +1,11 @@
 import { faArrowRight, faXmark } from '@fortawesome/free-solid-svg-icons'
 import { ActionButton } from '../../components/ActionButton'
-import { onboardingPaths, useDismiss, useNextClick } from '.'
+import {
+  ONBOARDING_PROJECT_NAME,
+  onboardingPaths,
+  useDismiss,
+  useNextClick,
+} from '.'
 import { useGlobalStateContext } from 'hooks/useGlobalStateContext'
 import { Themes, getSystemTheme } from 'lib/theme'
 import { bracket } from 'lib/exampleKcl'
@@ -25,14 +30,20 @@ function OnboardingWithNewFile() {
   }))
   const {
     settings: {
-      context: { defaultDirectory, defaultProjectName },
+      context: { defaultDirectory },
     },
   } = useGlobalStateContext()
 
   async function createAndOpenNewProject() {
     const projects = await getProjectsInDir(defaultDirectory)
-    const nextIndex = await getNextProjectIndex(defaultProjectName, projects)
-    const name = interpolateProjectNameWithIndex(defaultProjectName, nextIndex)
+    const nextIndex = await getNextProjectIndex(
+      ONBOARDING_PROJECT_NAME,
+      projects
+    )
+    const name = interpolateProjectNameWithIndex(
+      ONBOARDING_PROJECT_NAME,
+      nextIndex
+    )
     const newFile = await createNewProject(defaultDirectory + '/' + name)
     navigate(`${paths.FILE}/${encodeURIComponent(newFile.path)}`)
   }

src/routes/Onboarding/index.tsx

@@ -1,5 +1,5 @@
 import { useHotkeys } from 'react-hotkeys-hook'
-import { Outlet, useRouteLoaderData, useNavigate } from 'react-router-dom'
+import { Outlet, useNavigate } from 'react-router-dom'
 import Introduction from './Introduction'
 import Camera from './Camera'
 import Sketching from './Sketching'
@@ -15,7 +15,10 @@ import UserMenu from './UserMenu'
 import ProjectMenu from './ProjectMenu'
 import Export from './Export'
 import FutureWork from './FutureWork'
-import { IndexLoaderData, paths } from 'Router'
+import { paths } from 'Router'
+import { useAbsoluteFilePath } from 'hooks/useAbsoluteFilePath'
+
+export const ONBOARDING_PROJECT_NAME = 'Tutorial Project $nn'
 
 export const onboardingPaths = {
   INDEX: '/',
@@ -86,29 +89,23 @@ export const onboardingRoutes = [
 ]
 
 export function useNextClick(newStatus: string) {
+  const filePath = useAbsoluteFilePath()
   const {
     settings: { send },
   } = useGlobalStateContext()
   const navigate = useNavigate()
-  const { project } = useRouteLoaderData(paths.FILE) as IndexLoaderData
 
   return useCallback(() => {
     send({
       type: 'Set Onboarding Status',
       data: { onboardingStatus: newStatus },
     })
-    navigate(
-      paths.FILE +
-        '/' +
-        encodeURIComponent(project?.path || 'new') +
-        paths.ONBOARDING.INDEX.slice(0, -1) +
-        newStatus
-    )
-  }, [project, newStatus, send, navigate])
+    navigate(filePath + paths.ONBOARDING.INDEX.slice(0, -1) + newStatus)
+  }, [filePath, newStatus, send, navigate])
 }
 
 export function useDismiss() {
-  const routeData = useRouteLoaderData(paths.FILE) as IndexLoaderData
+  const filePath = useAbsoluteFilePath()
   const {
     settings: { send },
   } = useGlobalStateContext()
@@ -119,10 +116,8 @@ export function useDismiss() {
       type: 'Set Onboarding Status',
       data: { onboardingStatus: 'dismissed' },
     })
-    navigate(
-      paths.FILE + '/' + encodeURIComponent(routeData?.project?.path || 'new')
-    )
-  }, [send, navigate, routeData])
+    navigate(filePath)
+  }, [send, navigate, filePath])
 }
 
 const Onboarding = () => {

src/routes/Settings.tsx

@@ -24,11 +24,19 @@ import {
 } from 'lib/cameraControls'
 import { UnitSystem } from 'machines/settingsMachine'
 import { useDotDotSlash } from 'hooks/useDotDotSlash'
+import {
+  createNewProject,
+  getNextProjectIndex,
+  getProjectsInDir,
+  interpolateProjectNameWithIndex,
+} from 'lib/tauriFS'
+import { ONBOARDING_PROJECT_NAME } from './Onboarding'
 
 export const Settings = () => {
   const loaderData = useRouteLoaderData(paths.FILE) as IndexLoaderData
   const navigate = useNavigate()
   const location = useLocation()
+  const isFileSettings = location.pathname.includes(paths.FILE)
   const dotDotSlash = useDotDotSlash()
   useHotkeys('esc', () => navigate(dotDotSlash()))
   const {
@@ -63,6 +71,33 @@ export const Settings = () => {
     }
   }
 
+  function restartOnboarding() {
+    send({
+      type: 'Set Onboarding Status',
+      data: { onboardingStatus: '' },
+    })
+
+    if (isFileSettings) {
+      navigate(dotDotSlash(1) + paths.ONBOARDING.INDEX)
+    } else {
+      createAndOpenNewProject()
+    }
+  }
+
+  async function createAndOpenNewProject() {
+    const projects = await getProjectsInDir(defaultDirectory)
+    const nextIndex = await getNextProjectIndex(
+      ONBOARDING_PROJECT_NAME,
+      projects
+    )
+    const name = interpolateProjectNameWithIndex(
+      ONBOARDING_PROJECT_NAME,
+      nextIndex
+    )
+    const newFile = await createNewProject(defaultDirectory + '/' + name)
+    navigate(`${paths.FILE}/${encodeURIComponent(newFile.path)}`)
+  }
+
   return (
     <div className="fixed inset-0 z-40 overflow-auto body-bg">
       <AppHeader showToolbar={false} project={loaderData?.project}>
@@ -257,26 +292,18 @@ export const Settings = () => {
             ))}
           </select>
         </SettingsSection>
-        {location.pathname.includes(paths.FILE) && (
-          <SettingsSection
-            title="Onboarding"
-            description="Replay the onboarding process"
+        <SettingsSection
+          title="Onboarding"
+          description="Replay the onboarding process"
+        >
+          <ActionButton
+            Element="button"
+            onClick={restartOnboarding}
+            icon={{ icon: faArrowRotateBack }}
           >
-            <ActionButton
-              Element="button"
-              onClick={() => {
-                send({
-                  type: 'Set Onboarding Status',
-                  data: { onboardingStatus: '' },
-                })
-                navigate(dotDotSlash(1) + paths.ONBOARDING.INDEX)
-              }}
-              icon={{ icon: faArrowRotateBack }}
-            >
-              Replay Onboarding
-            </ActionButton>
-          </SettingsSection>
-        )}
+            Replay Onboarding
+          </ActionButton>
+        </SettingsSection>
       </div>
     </div>
   )

src/useStore.ts

@@ -20,6 +20,8 @@ import { KCLError } from './lang/errors'
 import { deferExecution } from 'lib/utils'
 import { bracket } from 'lib/exampleKcl'
 import { engineCommandManager } from './lang/std/engineConnection'
+import { DefaultPlanes } from './wasm-lib/kcl/bindings/DefaultPlanes'
+import { initDefaultPlanes } from './hooks/useAppMode'
 
 export type Selection = {
   type: 'default' | 'line-end' | 'line-mid'
@@ -182,6 +184,10 @@ export interface StoreState {
   }) => void
   isExecuting: boolean
   setIsExecuting: (isExecuting: boolean) => void
+  defaultPlanes: DefaultPlanes | null
+  setDefaultPlanes: (defaultPlanes: DefaultPlanes) => void
+  currentPlane: string | null
+  setCurrentPlane: (currentPlane: string) => void
 
   showHomeMenu: boolean
   setHomeShowMenu: (showMenu: boolean) => void
@@ -222,10 +228,20 @@ export const useStore = create<StoreState>()(
           }
         },
         executeCode: async (code, force) => {
+          if (!get().defaultPlanes) {
+            let defaultPlanes = await initDefaultPlanes(
+              engineCommandManager,
+              true
+            )
+            if (!defaultPlanes) return
+            get().setDefaultPlanes(defaultPlanes)
+          }
+
           const result = await executeCode({
             code: code || get().code,
             lastAst: get().ast,
             engineCommandManager: engineCommandManager,
+            defaultPlanes: get().defaultPlanes!,
             force,
           })
           if (!result.isChange) {
@@ -332,11 +348,20 @@ export const useStore = create<StoreState>()(
         executeAst: async (ast) => {
           const _ast = ast || get().ast
           if (!get().isStreamReady) return
+          if (!get().defaultPlanes) {
+            let defaultPlanes = await initDefaultPlanes(
+              engineCommandManager,
+              true
+            )
+            if (!defaultPlanes) return
+            get().setDefaultPlanes(defaultPlanes)
+          }
 
           set({ isExecuting: true })
           const { logs, errors, programMemory } = await executeAst({
             ast: _ast,
             engineCommandManager,
+            defaultPlanes: get().defaultPlanes!,
           })
           set({
             programMemory,
@@ -349,10 +374,20 @@ export const useStore = create<StoreState>()(
           const _ast = ast || get().ast
           if (!get().isStreamReady) return
 
+          if (!get().defaultPlanes) {
+            let defaultPlanes = await initDefaultPlanes(
+              engineCommandManager,
+              true
+            )
+            if (!defaultPlanes) return
+            get().setDefaultPlanes(defaultPlanes)
+          }
+
           const { logs, errors, programMemory } = await executeAst({
             ast: _ast,
             engineCommandManager,
             useFakeExecutor: true,
+            defaultPlanes: get().defaultPlanes!,
           })
           set({
             programMemory,
@@ -453,6 +488,10 @@ export const useStore = create<StoreState>()(
         },
         isExecuting: false,
         setIsExecuting: (isExecuting) => set({ isExecuting }),
+        defaultPlanes: null,
+        setDefaultPlanes: (defaultPlanes) => set({ defaultPlanes }),
+        currentPlane: null,
+        setCurrentPlane: (currentPlane) => set({ currentPlane }),
 
         // tauri specific app settings
         defaultDir: {
@@ -512,11 +551,13 @@ async function executeCode({
   engineCommandManager,
   code,
   lastAst,
+  defaultPlanes,
   force,
 }: {
   code: string
   lastAst: Program
   engineCommandManager: EngineCommandManager
+  defaultPlanes: DefaultPlanes
   force?: boolean
 }): Promise<
   | {
@@ -566,6 +607,7 @@ async function executeCode({
   const { logs, errors, programMemory } = await executeAst({
     ast,
     engineCommandManager,
+    defaultPlanes,
   })
   return {
     ast,
@@ -579,10 +621,12 @@ async function executeCode({
 async function executeAst({
   ast,
   engineCommandManager,
+  defaultPlanes,
   useFakeExecutor = false,
 }: {
   ast: Program
   engineCommandManager: EngineCommandManager
+  defaultPlanes: DefaultPlanes
   useFakeExecutor?: boolean
 }): Promise<{
   logs: string[]
@@ -605,7 +649,8 @@ async function executeAst({
             root: defaultProgramMemory,
             return: null,
           },
-          engineCommandManager
+          engineCommandManager,
+          defaultPlanes
         ))
 
     await engineCommandManager.waitForAllCommands(ast, programMemory)

src/wasm-lib/Cargo.lock

@@ -1390,7 +1390,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-lib"
-version = "0.1.32"
+version = "0.1.33"
 dependencies = [
  "anyhow",
  "async-recursion",
@@ -1426,9 +1426,9 @@ dependencies = [
 
 [[package]]
 name = "kittycad"
-version = "0.2.28"
+version = "0.2.31"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "35b2f9302648dbb06fd7121687f9505fc3179eba84111a06d76b246e3158f5dc"
+checksum = "539b323537b877fc8dd130362b8f1af9af8051c19208bb8bfd816ab7c330f2bb"
 dependencies = [
  "anyhow",
  "async-trait",
@@ -2217,9 +2217,9 @@ checksum = "dbb5fb1acd8a1a18b3dd5be62d25485eb770e05afb408a9627d14d451bae12da"
 
 [[package]]
 name = "reqwest"
-version = "0.11.21"
+version = "0.11.22"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "78fdbab6a7e1d7b13cc8ff10197f47986b41c639300cc3c8158cac7847c9bbef"
+checksum = "046cd98826c46c2ac8ddecae268eb5c2e58628688a5fc7a2643704a73faba95b"
 dependencies = [
  "base64 0.21.4",
  "bytes",

src/wasm-lib/Cargo.toml

@@ -11,7 +11,7 @@ crate-type = ["cdylib"]
 bson = { version = "2.7.0", features = ["uuid-1", "chrono"] }
 gloo-utils = "0.2.0"
 kcl-lib = { path = "kcl" }
-kittycad = { version = "0.2.27", default-features = false, features = ["js"] }
+kittycad = { version = "0.2.31", default-features = false, features = ["js"] }
 serde_json = "1.0.107"
 uuid = { version = "1.4.1", features = ["v4", "js", "serde"] }
 wasm-bindgen = "0.2.87"
@@ -20,9 +20,9 @@ wasm-bindgen-futures = "0.4.37"
 [dev-dependencies]
 anyhow = "1"
 image = "0.24.7"
-kittycad = "0.2.27"
+kittycad = "0.2.31"
 pretty_assertions = "1.4.0"
-reqwest = { version = "0.11.21", default-features = false }
+reqwest = { version = "0.11.22", default-features = false }
 tokio = { version = "1.32.0", features = ["rt-multi-thread", "macros", "time"] }
 twenty-twenty = "0.6.1"
 uuid = { version = "1.4.1", features = ["v4", "js", "serde"] }

src/wasm-lib/kcl/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-lib"
 description = "KittyCAD Language"
-version = "0.1.32"
+version = "0.1.33"
 edition = "2021"
 license = "MIT"
 
@@ -15,7 +15,7 @@ clap = { version = "4.4.6", features = ["cargo", "derive", "env", "unicode"], op
 dashmap = "5.5.3"
 derive-docs = { version = "0.1.4" }
 #derive-docs = { path = "../derive-docs" }
-kittycad = { version = "0.2.27", default-features = false, features = ["js"] }
+kittycad = { version = "0.2.31", default-features = false, features = ["js"] }
 lazy_static = "1.4.0"
 parse-display = "0.8.2"
 schemars = { version = "0.8", features = ["impl_json_schema", "url", "uuid1"] }
@@ -36,7 +36,7 @@ web-sys = { version = "0.3.64", features = ["console"] }
 [target.'cfg(not(target_arch = "wasm32"))'.dependencies]
 bson = { version = "2.7.0", features = ["uuid-1", "chrono"] }
 futures = { version = "0.3.28" }
-reqwest = { version = "0.11.21", default-features = false }
+reqwest = { version = "0.11.22", default-features = false }
 tokio = { version = "1.32.0", features = ["full"] }
 tokio-tungstenite = { version = "0.20.0", features = ["rustls-tls-native-roots"] }
 tower-lsp = { version = "0.20.0", features = ["proposed"] }

src/wasm-lib/kcl/clippy.toml

@@ -1 +1 @@
-enum-variant-size-threshold = 24
+enum-variant-size-threshold = 48

src/wasm-lib/kcl/src/ast/modify.rs

@@ -31,6 +31,8 @@ pub async fn modify_ast_for_sketch(
     program: &mut Program,
     // The name of the sketch.
     sketch_name: &str,
+    // The type of plane the sketch is on. `XY` or `XZ`, etc
+    plane: crate::executor::PlaneType,
     // The ID of the parent sketch.
     sketch_id: uuid::Uuid,
 ) -> Result<String, KclError> {
@@ -153,10 +155,11 @@ pub async fn modify_ast_for_sketch(
         y: (first_control_points.points[1].y - first_control_points.points[0].y),
         z: (first_control_points.points[1].z - first_control_points.points[0].z),
     };
-    let sketch = create_start_sketch_at(
+    let sketch = create_start_sketch_on(
         sketch_name,
         [first_control_points.points[0].x, first_control_points.points[0].y],
         [start_sketch_at_end.x, start_sketch_at_end.y],
+        plane,
         additional_lines,
     )?;
 
@@ -174,19 +177,24 @@ pub async fn modify_ast_for_sketch(
 }
 
 /// Create a pipe expression that starts a sketch at the given point and draws a line to the given point.
-fn create_start_sketch_at(
+fn create_start_sketch_on(
     name: &str,
     start: [f64; 2],
     end: [f64; 2],
+    plane: crate::executor::PlaneType,
     additional_lines: Vec<[f64; 2]>,
 ) -> Result<VariableDeclarator, KclError> {
-    let start_sketch_at = CallExpression::new(
-        "startSketchAt",
-        vec![ArrayExpression::new(vec![
-            Literal::new(round_before_recast(start[0]).into()).into(),
-            Literal::new(round_before_recast(start[1]).into()).into(),
-        ])
-        .into()],
+    let start_sketch_on = CallExpression::new("startSketchOn", vec![Literal::new(plane.to_string().into()).into()])?;
+    let start_profile_at = CallExpression::new(
+        "startProfileAt",
+        vec![
+            ArrayExpression::new(vec![
+                Literal::new(round_before_recast(start[0]).into()).into(),
+                Literal::new(round_before_recast(start[1]).into()).into(),
+            ])
+            .into(),
+            PipeSubstitution::new().into(),
+        ],
     )?;
 
     // Keep track of where we are so we can close the sketch if we need to.
@@ -209,7 +217,7 @@ fn create_start_sketch_at(
         ],
     )?;
 
-    let mut pipe_body = vec![start_sketch_at.into(), initial_line.into()];
+    let mut pipe_body = vec![start_sketch_on.into(), start_profile_at.into(), initial_line.into()];
 
     for (index, line) in additional_lines.iter().enumerate() {
         current_position.x += line[0];

src/wasm-lib/kcl/src/ast/types.rs

@@ -1,6 +1,6 @@
 //! Data types for the AST.
 
-use std::collections::HashMap;
+use std::{collections::HashMap, fmt::Write};
 
 use anyhow::Result;
 use parse_display::{Display, FromStr};
@@ -10,9 +10,8 @@ use serde_json::Map;
 use tower_lsp::lsp_types::{CompletionItem, CompletionItemKind, DocumentSymbol, Range as LspRange, SymbolKind};
 
 use crate::{
-    engine::EngineConnection,
     errors::{KclError, KclErrorDetails},
-    executor::{MemoryItem, Metadata, PipeInfo, ProgramMemory, SourceRange, UserVal},
+    executor::{ExecutorContext, MemoryItem, Metadata, PipeInfo, ProgramMemory, SourceRange, UserVal},
     parser::PIPE_OPERATOR,
 };
 
@@ -29,73 +28,74 @@ pub struct Program {
 impl Program {
     pub fn recast(&self, options: &FormatOptions, indentation_level: usize) -> String {
         let indentation = options.get_indentation(indentation_level);
-        let result = self
-            .body
-            .iter()
-            .map(|statement| match statement.clone() {
-                BodyItem::ExpressionStatement(expression_statement) => {
-                    expression_statement
-                        .expression
-                        .recast(options, indentation_level, false)
-                }
-                BodyItem::VariableDeclaration(variable_declaration) => variable_declaration
-                    .declarations
-                    .iter()
-                    .map(|declaration| {
-                        format!(
-                            "{}{} {} = {}",
-                            indentation,
-                            variable_declaration.kind,
-                            declaration.id.name,
-                            declaration.init.recast(options, 0, false)
-                        )
-                    })
-                    .collect::<String>(),
-                BodyItem::ReturnStatement(return_statement) => {
-                    format!(
-                        "{}return {}",
-                        indentation,
-                        return_statement.argument.recast(options, 0, false)
-                    )
-                }
-            })
-            .enumerate()
-            .map(|(index, recast_str)| {
-                let start_string = if index == 0 {
-                    // We need to indent.
-                    if let Some(start) = self.non_code_meta.start.clone() {
-                        start.format(&indentation)
-                    } else {
-                        indentation.to_string()
+        let result =
+            self.body
+                .iter()
+                .map(|statement| match statement.clone() {
+                    BodyItem::ExpressionStatement(expression_statement) => {
+                        expression_statement
+                            .expression
+                            .recast(options, indentation_level, false)
                     }
-                } else {
-                    // Do nothing, we already applied the indentation elsewhere.
-                    String::new()
-                };
+                    BodyItem::VariableDeclaration(variable_declaration) => variable_declaration
+                        .declarations
+                        .iter()
+                        .fold(String::new(), |mut output, declaration| {
+                            let _ = write!(
+                                output,
+                                "{}{} {} = {}",
+                                indentation,
+                                variable_declaration.kind,
+                                declaration.id.name,
+                                declaration.init.recast(options, 0, false)
+                            );
+                            output
+                        }),
+                    BodyItem::ReturnStatement(return_statement) => {
+                        format!(
+                            "{}return {}",
+                            indentation,
+                            return_statement.argument.recast(options, 0, false)
+                        )
+                    }
+                })
+                .enumerate()
+                .fold(String::new(), |mut output, (index, recast_str)| {
+                    let start_string = if index == 0 {
+                        // We need to indent.
+                        if let Some(start) = self.non_code_meta.start.clone() {
+                            start.format(&indentation)
+                        } else {
+                            indentation.to_string()
+                        }
+                    } else {
+                        // Do nothing, we already applied the indentation elsewhere.
+                        String::new()
+                    };
 
-                // determine the value of the end string
-                // basically if we are inside a nested function we want to end with a new line
-                let maybe_line_break: String = if index == self.body.len() - 1 && indentation_level == 0 {
-                    String::new()
-                } else {
-                    "\n".to_string()
-                };
+                    // determine the value of the end string
+                    // basically if we are inside a nested function we want to end with a new line
+                    let maybe_line_break: String = if index == self.body.len() - 1 && indentation_level == 0 {
+                        String::new()
+                    } else {
+                        "\n".to_string()
+                    };
 
-                let custom_white_space_or_comment = match self.non_code_meta.non_code_nodes.get(&index) {
-                    Some(custom_white_space_or_comment) => custom_white_space_or_comment.format(&indentation),
-                    None => String::new(),
-                };
-                let end_string = if custom_white_space_or_comment.is_empty() {
-                    maybe_line_break
-                } else {
-                    custom_white_space_or_comment
-                };
+                    let custom_white_space_or_comment = match self.non_code_meta.non_code_nodes.get(&index) {
+                        Some(custom_white_space_or_comment) => custom_white_space_or_comment.format(&indentation),
+                        None => String::new(),
+                    };
+                    let end_string = if custom_white_space_or_comment.is_empty() {
+                        maybe_line_break
+                    } else {
+                        custom_white_space_or_comment
+                    };
 
-                format!("{}{}{}", start_string, recast_str, end_string)
-            })
-            .collect::<String>()
-            .trim()
-            .to_string();
+                    let _ = write!(output, "{}{}{}", start_string, recast_str, end_string);
+                    output
+                })
+                .trim()
+                .to_string();
 
         // Insert a final new line if the user wants it.
         if options.insert_final_newline {
@@ -631,7 +631,7 @@ impl BinaryPart {
         &self,
         memory: &mut ProgramMemory,
         pipe_info: &mut PipeInfo,
-        engine: &EngineConnection,
+        ctx: &ExecutorContext,
     ) -> Result<MemoryItem, KclError> {
         // We DO NOT set this gloablly because if we did and this was called inside a pipe it would
         // stop the execution of the pipe.
@@ -646,13 +646,13 @@ impl BinaryPart {
                 Ok(value.clone())
             }
             BinaryPart::BinaryExpression(binary_expression) => {
-                binary_expression.get_result(memory, &mut new_pipe_info, engine).await
+                binary_expression.get_result(memory, &mut new_pipe_info, ctx).await
             }
             BinaryPart::CallExpression(call_expression) => {
-                call_expression.execute(memory, &mut new_pipe_info, engine).await
+                call_expression.execute(memory, &mut new_pipe_info, ctx).await
             }
             BinaryPart::UnaryExpression(unary_expression) => {
-                unary_expression.get_result(memory, &mut new_pipe_info, engine).await
+                unary_expression.get_result(memory, &mut new_pipe_info, ctx).await
             }
             BinaryPart::MemberExpression(member_expression) => member_expression.get_result(memory),
         }
@@ -879,7 +879,7 @@ impl CallExpression {
         &self,
         memory: &mut ProgramMemory,
         pipe_info: &mut PipeInfo,
-        engine: &EngineConnection,
+        ctx: &ExecutorContext,
     ) -> Result<MemoryItem, KclError> {
         let fn_name = self.callee.name.clone();
 
@@ -893,7 +893,7 @@ impl CallExpression {
                     value.clone()
                 }
                 Value::BinaryExpression(binary_expression) => {
-                    binary_expression.get_result(memory, pipe_info, engine).await?
+                    binary_expression.get_result(memory, pipe_info, ctx).await?
                 }
                 Value::CallExpression(call_expression) => {
                     // We DO NOT set this gloablly because if we did and this was called inside a pipe it would
@@ -901,15 +901,11 @@ impl CallExpression {
                     // THIS IS IMPORTANT.
                     let mut new_pipe_info = pipe_info.clone();
                     new_pipe_info.is_in_pipe = false;
-                    call_expression.execute(memory, &mut new_pipe_info, engine).await?
+                    call_expression.execute(memory, &mut new_pipe_info, ctx).await?
                 }
-                Value::UnaryExpression(unary_expression) => {
-                    unary_expression.get_result(memory, pipe_info, engine).await?
-                }
-                Value::ObjectExpression(object_expression) => {
-                    object_expression.execute(memory, pipe_info, engine).await?
-                }
-                Value::ArrayExpression(array_expression) => array_expression.execute(memory, pipe_info, engine).await?,
+                Value::UnaryExpression(unary_expression) => unary_expression.get_result(memory, pipe_info, ctx).await?,
+                Value::ObjectExpression(object_expression) => object_expression.execute(memory, pipe_info, ctx).await?,
+                Value::ArrayExpression(array_expression) => array_expression.execute(memory, pipe_info, ctx).await?,
                 Value::PipeExpression(pipe_expression) => {
                     return Err(KclError::Semantic(KclErrorDetails {
                         message: format!("PipeExpression not implemented here: {:?}", pipe_expression),
@@ -941,12 +937,12 @@ impl CallExpression {
         match &self.function {
             Function::StdLib { func } => {
                 // Attempt to call the function.
-                let args = crate::std::Args::new(fn_args, self.into(), engine.clone());
+                let args = crate::std::Args::new(fn_args, self.into(), ctx.clone());
                 let result = func.std_lib_fn()(args).await?;
                 if pipe_info.is_in_pipe {
                     pipe_info.index += 1;
                     pipe_info.previous_results.push(result);
-                    execute_pipe_body(memory, &pipe_info.body.clone(), pipe_info, self.into(), engine).await
+                    execute_pipe_body(memory, &pipe_info.body.clone(), pipe_info, self.into(), ctx).await
                 } else {
                     Ok(result)
                 }
@@ -954,7 +950,7 @@ impl CallExpression {
             Function::InMemory => {
                 let func = memory.get(&fn_name, self.into())?;
                 let result = func
-                    .call_fn(fn_args, memory.clone(), engine.clone())
+                    .call_fn(fn_args, memory.clone(), ctx.clone())
                     .await?
                     .ok_or_else(|| {
                         KclError::UndefinedValue(KclErrorDetails {
@@ -969,7 +965,7 @@ impl CallExpression {
                     pipe_info.index += 1;
                     pipe_info.previous_results.push(result);
 
-                    execute_pipe_body(memory, &pipe_info.body.clone(), pipe_info, self.into(), engine).await
+                    execute_pipe_body(memory, &pipe_info.body.clone(), pipe_info, self.into(), ctx).await
                 } else {
                     Ok(result)
                 }
@@ -1507,7 +1503,7 @@ impl ArrayExpression {
         &self,
         memory: &mut ProgramMemory,
         pipe_info: &mut PipeInfo,
-        engine: &EngineConnection,
+        ctx: &ExecutorContext,
     ) -> Result<MemoryItem, KclError> {
         let mut results = Vec::with_capacity(self.elements.len());
 
@@ -1519,7 +1515,7 @@ impl ArrayExpression {
                     value.clone()
                 }
                 Value::BinaryExpression(binary_expression) => {
-                    binary_expression.get_result(memory, pipe_info, engine).await?
+                    binary_expression.get_result(memory, pipe_info, ctx).await?
                 }
                 Value::CallExpression(call_expression) => {
                     // We DO NOT set this gloablly because if we did and this was called inside a pipe it would
@@ -1527,16 +1523,12 @@ impl ArrayExpression {
                     // THIS IS IMPORTANT.
                     let mut new_pipe_info = pipe_info.clone();
                     new_pipe_info.is_in_pipe = false;
-                    call_expression.execute(memory, &mut new_pipe_info, engine).await?
+                    call_expression.execute(memory, &mut new_pipe_info, ctx).await?
                 }
-                Value::UnaryExpression(unary_expression) => {
-                    unary_expression.get_result(memory, pipe_info, engine).await?
-                }
-                Value::ObjectExpression(object_expression) => {
-                    object_expression.execute(memory, pipe_info, engine).await?
-                }
-                Value::ArrayExpression(array_expression) => array_expression.execute(memory, pipe_info, engine).await?,
-                Value::PipeExpression(pipe_expression) => pipe_expression.get_result(memory, pipe_info, engine).await?,
+                Value::UnaryExpression(unary_expression) => unary_expression.get_result(memory, pipe_info, ctx).await?,
+                Value::ObjectExpression(object_expression) => object_expression.execute(memory, pipe_info, ctx).await?,
+                Value::ArrayExpression(array_expression) => array_expression.execute(memory, pipe_info, ctx).await?,
+                Value::PipeExpression(pipe_expression) => pipe_expression.get_result(memory, pipe_info, ctx).await?,
                 Value::PipeSubstitution(pipe_substitution) => {
                     return Err(KclError::Semantic(KclErrorDetails {
                         message: format!("PipeSubstitution not implemented here: {:?}", pipe_substitution),
@@ -1663,7 +1655,7 @@ impl ObjectExpression {
         &self,
         memory: &mut ProgramMemory,
         pipe_info: &mut PipeInfo,
-        engine: &EngineConnection,
+        ctx: &ExecutorContext,
     ) -> Result<MemoryItem, KclError> {
         let mut object = Map::new();
         for property in &self.properties {
@@ -1674,7 +1666,7 @@ impl ObjectExpression {
                     value.clone()
                 }
                 Value::BinaryExpression(binary_expression) => {
-                    binary_expression.get_result(memory, pipe_info, engine).await?
+                    binary_expression.get_result(memory, pipe_info, ctx).await?
                 }
                 Value::CallExpression(call_expression) => {
                     // We DO NOT set this gloablly because if we did and this was called inside a pipe it would
@@ -1682,16 +1674,12 @@ impl ObjectExpression {
                     // THIS IS IMPORTANT.
                     let mut new_pipe_info = pipe_info.clone();
                     new_pipe_info.is_in_pipe = false;
-                    call_expression.execute(memory, &mut new_pipe_info, engine).await?
+                    call_expression.execute(memory, &mut new_pipe_info, ctx).await?
                 }
-                Value::UnaryExpression(unary_expression) => {
-                    unary_expression.get_result(memory, pipe_info, engine).await?
-                }
-                Value::ObjectExpression(object_expression) => {
-                    object_expression.execute(memory, pipe_info, engine).await?
-                }
-                Value::ArrayExpression(array_expression) => array_expression.execute(memory, pipe_info, engine).await?,
-                Value::PipeExpression(pipe_expression) => pipe_expression.get_result(memory, pipe_info, engine).await?,
+                Value::UnaryExpression(unary_expression) => unary_expression.get_result(memory, pipe_info, ctx).await?,
+                Value::ObjectExpression(object_expression) => object_expression.execute(memory, pipe_info, ctx).await?,
+                Value::ArrayExpression(array_expression) => array_expression.execute(memory, pipe_info, ctx).await?,
+                Value::PipeExpression(pipe_expression) => pipe_expression.get_result(memory, pipe_info, ctx).await?,
                 Value::PipeSubstitution(pipe_substitution) => {
                     return Err(KclError::Semantic(KclErrorDetails {
                         message: format!("PipeSubstitution not implemented here: {:?}", pipe_substitution),
@@ -2109,7 +2097,7 @@ impl BinaryExpression {
         &self,
         memory: &mut ProgramMemory,
         pipe_info: &mut PipeInfo,
-        engine: &EngineConnection,
+        ctx: &ExecutorContext,
     ) -> Result<MemoryItem, KclError> {
         // We DO NOT set this gloablly because if we did and this was called inside a pipe it would
         // stop the execution of the pipe.
@@ -2119,12 +2107,12 @@ impl BinaryExpression {
 
         let left_json_value = self
             .left
-            .get_result(memory, &mut new_pipe_info, engine)
+            .get_result(memory, &mut new_pipe_info, ctx)
             .await?
             .get_json_value()?;
         let right_json_value = self
             .right
-            .get_result(memory, &mut new_pipe_info, engine)
+            .get_result(memory, &mut new_pipe_info, ctx)
             .await?
             .get_json_value()?;
 
@@ -2283,7 +2271,7 @@ impl UnaryExpression {
         &self,
         memory: &mut ProgramMemory,
         pipe_info: &mut PipeInfo,
-        engine: &EngineConnection,
+        ctx: &ExecutorContext,
     ) -> Result<MemoryItem, KclError> {
         // We DO NOT set this gloablly because if we did and this was called inside a pipe it would
         // stop the execution of the pipe.
@@ -2294,7 +2282,7 @@ impl UnaryExpression {
         let num = parse_json_number_as_f64(
             &self
                 .argument
-                .get_result(memory, &mut new_pipe_info, engine)
+                .get_result(memory, &mut new_pipe_info, ctx)
                 .await?
                 .get_json_value()?,
             self.into(),
@@ -2427,12 +2415,12 @@ impl PipeExpression {
         &self,
         memory: &mut ProgramMemory,
         pipe_info: &mut PipeInfo,
-        engine: &EngineConnection,
+        ctx: &ExecutorContext,
     ) -> Result<MemoryItem, KclError> {
         // Reset the previous results.
         pipe_info.previous_results = vec![];
         pipe_info.index = 0;
-        execute_pipe_body(memory, &self.body, pipe_info, self.into(), engine).await
+        execute_pipe_body(memory, &self.body, pipe_info, self.into(), ctx).await
     }
 
     /// Rename all identifiers that have the old name to the new given name.
@@ -2449,7 +2437,7 @@ async fn execute_pipe_body(
     body: &[Value],
     pipe_info: &mut PipeInfo,
     source_range: SourceRange,
-    engine: &EngineConnection,
+    ctx: &ExecutorContext,
 ) -> Result<MemoryItem, KclError> {
     if pipe_info.index == body.len() {
         pipe_info.is_in_pipe = false;
@@ -2474,15 +2462,15 @@ async fn execute_pipe_body(
 
     match expression {
         Value::BinaryExpression(binary_expression) => {
-            let result = binary_expression.get_result(memory, pipe_info, engine).await?;
+            let result = binary_expression.get_result(memory, pipe_info, ctx).await?;
             pipe_info.previous_results.push(result);
             pipe_info.index += 1;
-            execute_pipe_body(memory, body, pipe_info, source_range, engine).await
+            execute_pipe_body(memory, body, pipe_info, source_range, ctx).await
         }
         Value::CallExpression(call_expression) => {
             pipe_info.is_in_pipe = true;
             pipe_info.body = body.to_vec();
-            call_expression.execute(memory, pipe_info, engine).await
+            call_expression.execute(memory, pipe_info, ctx).await
         }
         _ => {
             // Return an error this should not happen.
@@ -2775,7 +2763,8 @@ mod tests {
 
     #[test]
     fn test_get_lsp_symbols() {
-        let code = r#"const part001 = startSketchAt([0.0000000000, 5.0000000000])
+        let code = r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([0.0000000000, 5.0000000000], %)
     |> line([0.4900857016, -0.0240763666], %)
 
 const part002 = "part002"
@@ -2796,25 +2785,10 @@ show(part001)"#;
         assert_eq!(symbols.len(), 7);
     }
 
-    #[test]
-    fn test_recast_with_std_and_non_stdlib() {
-        let some_program_string = r#"{"body":[{"type":"VariableDeclaration","start":0,"end":0,"declarations":[{"type":"VariableDeclarator","start":0,"end":0,"id":{"type":"Identifier","start":0,"end":0,"name":"part001"},"init":{"type":"PipeExpression","start":0,"end":0,"body":[{"type":"CallExpression","start":0,"end":0,"callee":{"type":"Identifier","start":0,"end":0,"name":"startSketchAt"},"function":{"type":"StdLib","func":{"name":"startSketchAt","summary":"","description":"","tags":[],"returnValue":{"type":"","required":false,"name":"","schema":{}},"args":[],"unpublished":false,"deprecated":false}},"optional":false,"arguments":[{"type":"Literal","start":0,"end":0,"value":"default","raw":"default"}]},{"type":"CallExpression","start":0,"end":0,"callee":{"type":"Identifier","start":0,"end":0,"name":"ry"},"function":{"type":"InMemory"},"optional":false,"arguments":[{"type":"Literal","start":0,"end":0,"value":90,"raw":"90"},{"type":"PipeSubstitution","start":0,"end":0}]},{"type":"CallExpression","start":0,"end":0,"callee":{"type":"Identifier","start":0,"end":0,"name":"line"},"function":{"type":"StdLib","func":{"name":"line","summary":"","description":"","tags":[],"returnValue":{"type":"","required":false,"name":"","schema":{}},"args":[],"unpublished":false,"deprecated":false}},"optional":false,"arguments":[{"type":"Literal","start":0,"end":0,"value":"default","raw":"default"},{"type":"PipeSubstitution","start":0,"end":0}]}],"nonCodeMeta":{"nonCodeNodes":{},"start":null}}}],"kind":"const"},{"type":"ExpressionStatement","start":0,"end":0,"expression":{"type":"CallExpression","start":0,"end":0,"callee":{"type":"Identifier","start":0,"end":0,"name":"show"},"function":{"type":"StdLib","func":{"name":"show","summary":"","description":"","tags":[],"returnValue":{"type":"","required":false,"name":"","schema":{}},"args":[],"unpublished":false,"deprecated":false}},"optional":false,"arguments":[{"type":"Identifier","start":0,"end":0,"name":"part001"}]}}],"start":0,"end":0,"nonCodeMeta":{"nonCodeNodes":{},"start":null}}"#;
-        let some_program: crate::ast::types::Program = serde_json::from_str(some_program_string).unwrap();
-
-        let recasted = some_program.recast(&Default::default(), 0);
-        assert_eq!(
-            recasted,
-            r#"const part001 = startSketchAt('default')
-  |> ry(90, %)
-  |> line('default', %)
-show(part001)
-"#
-        );
-    }
-
     #[test]
     fn test_recast_with_bad_indentation() {
-        let some_program_string = r#"const part001 = startSketchAt([0.0, 5.0])
+        let some_program_string = r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([0.0, 5.0], %)
               |> line([0.4900857016, -0.0240763666], %)
     |> line([0.6804562304, 0.9087880491], %)"#;
         let tokens = crate::token::lexer(some_program_string);
@@ -2824,7 +2798,8 @@ show(part001)
         let recasted = program.recast(&Default::default(), 0);
         assert_eq!(
             recasted,
-            r#"const part001 = startSketchAt([0.0, 5.0])
+            r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([0.0, 5.0], %)
   |> line([0.4900857016, -0.0240763666], %)
   |> line([0.6804562304, 0.9087880491], %)
 "#
@@ -2833,7 +2808,8 @@ show(part001)
 
     #[test]
     fn test_recast_with_bad_indentation_and_inline_comment() {
-        let some_program_string = r#"const part001 = startSketchAt([0.0, 5.0])
+        let some_program_string = r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([0.0, 5.0], %)
               |> line([0.4900857016, -0.0240763666], %) // hello world
     |> line([0.6804562304, 0.9087880491], %)"#;
         let tokens = crate::token::lexer(some_program_string);
@@ -2843,7 +2819,8 @@ show(part001)
         let recasted = program.recast(&Default::default(), 0);
         assert_eq!(
             recasted,
-            r#"const part001 = startSketchAt([0.0, 5.0])
+            r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([0.0, 5.0], %)
   |> line([0.4900857016, -0.0240763666], %) // hello world
   |> line([0.6804562304, 0.9087880491], %)
 "#
@@ -2851,7 +2828,8 @@ show(part001)
     }
     #[test]
     fn test_recast_with_bad_indentation_and_line_comment() {
-        let some_program_string = r#"const part001 = startSketchAt([0.0, 5.0])
+        let some_program_string = r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([0.0, 5.0], %)
               |> line([0.4900857016, -0.0240763666], %)
         // hello world
     |> line([0.6804562304, 0.9087880491], %)"#;
@@ -2862,7 +2840,8 @@ show(part001)
         let recasted = program.recast(&Default::default(), 0);
         assert_eq!(
             recasted,
-            r#"const part001 = startSketchAt([0.0, 5.0])
+            r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([0.0, 5.0], %)
   |> line([0.4900857016, -0.0240763666], %)
   // hello world
   |> line([0.6804562304, 0.9087880491], %)
@@ -2904,7 +2883,8 @@ show(part001)
     #[test]
     fn test_recast_lots_of_comments() {
         let some_program_string = r#"// comment at start
-const mySk1 = startSketchAt([0, 0])
+const mySk1 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo([1, 1], %)
   // comment here
   |> lineTo({ to: [0, 1], tag: 'myTag' }, %)
@@ -2926,7 +2906,8 @@ const mySk1 = startSketchAt([0, 0])
         assert_eq!(
             recasted,
             r#"// comment at start
-const mySk1 = startSketchAt([0, 0])
+const mySk1 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo([1, 1], %)
   // comment here
   |> lineTo({ to: [0, 1], tag: 'myTag' }, %)
@@ -2946,7 +2927,8 @@ a comment between pipe expression statements */
 
     #[test]
     fn test_recast_multiline_object() {
-        let some_program_string = r#"const part001 = startSketchAt([-0.01, -0.08])
+        let some_program_string = r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([-0.01, -0.08], %)
   |> line({ to: [0.62, 4.15], tag: 'seg01' }, %)
   |> line([2.77, -1.24], %)
   |> angledLineThatIntersects({
@@ -3034,7 +3016,8 @@ const myVar2 = 5
 const myVar3 = 6
 const myAng = 40
 const myAng2 = 134
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> line({ to: [1, 3.82], tag: 'seg01' }, %) // ln-should-get-tag
   |> angledLineToX([
        -angleToMatchLengthX('seg01', myVar, %),
@@ -3059,7 +3042,8 @@ const myVar2 = 5
 const myVar3 = 6
 const myAng = 40
 const myAng2 = 134
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+   |> startProfileAt([0, 0], %)
    |> line({ to: [1, 3.82], tag: 'seg01' }, %) // ln-should-get-tag
    |> angledLineToX([
          -angleToMatchLengthX('seg01', myVar, %),
@@ -3087,7 +3071,8 @@ const part001 = startSketchAt([0, 0])
 
     #[test]
     fn test_recast_after_rename_std() {
-        let some_program_string = r#"const part001 = startSketchAt([0.0000000000, 5.0000000000])
+        let some_program_string = r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([0.0000000000, 5.0000000000], %)
     |> line([0.4900857016, -0.0240763666], %)
 
 const part002 = "part002"
@@ -3109,7 +3094,8 @@ show(part001)"#;
         let recasted = program.recast(&Default::default(), 0);
         assert_eq!(
             recasted,
-            r#"const mySuperCoolPart = startSketchAt([0.0, 5.0])
+            r#"const mySuperCoolPart = startSketchOn('XY')
+  |> startProfileAt([0.0, 5.0], %)
   |> line([0.4900857016, -0.0240763666], %)
 
 const part002 = "part002"
@@ -3153,7 +3139,8 @@ show(mySuperCoolPart)
 const l = 8
 const h = 10
 
-const firstExtrude = startSketchAt([0,0])
+const firstExtrude = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |> line([0, l], %)
   |> line([w, 0], %)
   |> line([0, -l], %)
@@ -3172,7 +3159,8 @@ show(firstExtrude)"#;
 const l = 8
 const h = 10
 
-const firstExtrude = startSketchAt([0, 0])
+const firstExtrude = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> line([0, l], %)
   |> line([w, 0], %)
   |> line([0, -l], %)

src/wasm-lib/kcl/src/executor.rs

@@ -3,13 +3,15 @@
 use std::collections::HashMap;
 
 use anyhow::Result;
+use kittycad::types::{Color, ModelingCmd, Point3D};
+use parse_display::{Display, FromStr};
 use schemars::JsonSchema;
 use serde::{Deserialize, Serialize};
 use tower_lsp::lsp_types::{Position as LspPosition, Range as LspRange};
 
 use crate::{
     ast::types::{BodyItem, Function, FunctionExpression, Value},
-    engine::EngineConnection,
+    engine::{EngineConnection, EngineManager},
     errors::{KclError, KclErrorDetails},
 };
 
@@ -101,6 +103,7 @@ impl ProgramReturn {
 #[serde(tag = "type")]
 pub enum MemoryItem {
     UserVal(UserVal),
+    Plane(Box<Plane>),
     SketchGroup(Box<SketchGroup>),
     ExtrudeGroup(Box<ExtrudeGroup>),
     #[ts(skip)]
@@ -115,6 +118,166 @@ pub enum MemoryItem {
     },
 }
 
+/// A plane.
+#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
+#[ts(export)]
+#[serde(rename_all = "camelCase")]
+pub struct Plane {
+    /// The id of the plane.
+    pub id: uuid::Uuid,
+    // The code for the plane either a string or custom.
+    pub value: PlaneType,
+    /// Origin of the plane.
+    pub origin: Point3d,
+    /// What should the plane’s X axis be?
+    pub x_axis: Point3d,
+    /// What should the plane’s Y axis be?
+    pub y_axis: Point3d,
+    /// The z-axis (normal).
+    pub z_axis: Point3d,
+    #[serde(rename = "__meta")]
+    pub meta: Vec<Metadata>,
+}
+
+/// Type for a plane.
+#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema, FromStr, Display)]
+#[ts(export)]
+#[serde(rename_all = "camelCase")]
+#[display(style = "camelCase")]
+pub enum PlaneType {
+    #[serde(rename = "XY", alias = "xy")]
+    #[display("XY")]
+    XY,
+    #[serde(rename = "XZ", alias = "xz")]
+    #[display("XZ")]
+    XZ,
+    #[serde(rename = "YZ", alias = "yz")]
+    #[display("YZ")]
+    YZ,
+    /// A custom plane.
+    #[serde(rename = "Custom")]
+    #[display("Custom")]
+    Custom,
+}
+
+#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
+#[ts(export)]
+#[serde(rename_all = "camelCase")]
+pub struct DefaultPlanes {
+    pub xy: uuid::Uuid,
+    pub xz: uuid::Uuid,
+    pub yz: uuid::Uuid,
+}
+
+impl DefaultPlanes {
+    pub async fn new(engine: &EngineConnection) -> Result<Self, KclError> {
+        // Create new default planes.
+        let default_size = 60.0;
+        let default_origin = Point3D { x: 0.0, y: 0.0, z: 0.0 };
+
+        // Create xy plane.
+        let xy = uuid::Uuid::new_v4();
+        engine
+            .send_modeling_cmd(
+                xy,
+                SourceRange::default(),
+                ModelingCmd::MakePlane {
+                    clobber: false,
+                    origin: default_origin.clone(),
+                    size: default_size,
+                    x_axis: Point3D { x: 1.0, y: 0.0, z: 0.0 },
+                    y_axis: Point3D { x: 0.0, y: 1.0, z: 0.0 },
+                    hide: Some(true),
+                },
+            )
+            .await?;
+        // Set the color.
+        engine
+            .send_modeling_cmd(
+                uuid::Uuid::new_v4(),
+                SourceRange::default(),
+                ModelingCmd::PlaneSetColor {
+                    color: Color {
+                        r: 0.7,
+                        g: 0.28,
+                        b: 0.28,
+                        a: 0.4,
+                    },
+                    plane_id: xy,
+                },
+            )
+            .await?;
+
+        // Create yz plane.
+        let yz = uuid::Uuid::new_v4();
+        engine
+            .send_modeling_cmd(
+                yz,
+                SourceRange::default(),
+                ModelingCmd::MakePlane {
+                    clobber: false,
+                    origin: default_origin.clone(),
+                    size: default_size,
+                    x_axis: Point3D { x: 0.0, y: 1.0, z: 0.0 },
+                    y_axis: Point3D { x: 0.0, y: 0.0, z: 1.0 },
+                    hide: Some(true),
+                },
+            )
+            .await?;
+        // Set the color.
+        engine
+            .send_modeling_cmd(
+                uuid::Uuid::new_v4(),
+                SourceRange::default(),
+                ModelingCmd::PlaneSetColor {
+                    color: Color {
+                        r: 0.28,
+                        g: 0.7,
+                        b: 0.28,
+                        a: 0.4,
+                    },
+                    plane_id: yz,
+                },
+            )
+            .await?;
+
+        // Create xz plane.
+        let xz = uuid::Uuid::new_v4();
+        engine
+            .send_modeling_cmd(
+                xz,
+                SourceRange::default(),
+                ModelingCmd::MakePlane {
+                    clobber: false,
+                    origin: default_origin,
+                    size: default_size,
+                    x_axis: Point3D { x: 1.0, y: 0.0, z: 0.0 },
+                    y_axis: Point3D { x: 0.0, y: 0.0, z: 1.0 },
+                    hide: Some(true),
+                },
+            )
+            .await?;
+        // Set the color.
+        engine
+            .send_modeling_cmd(
+                uuid::Uuid::new_v4(),
+                SourceRange::default(),
+                ModelingCmd::PlaneSetColor {
+                    color: Color {
+                        r: 0.28,
+                        g: 0.28,
+                        b: 0.7,
+                        a: 0.4,
+                    },
+                    plane_id: xz,
+                },
+            )
+            .await?;
+
+        Ok(Self { xy, xz, yz })
+    }
+}
+
 #[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
 #[ts(export)]
 #[serde(tag = "type", rename_all = "camelCase")]
@@ -140,7 +303,7 @@ pub type MemoryFunction =
         memory: ProgramMemory,
         expression: Box<FunctionExpression>,
         metadata: Vec<Metadata>,
-        engine: EngineConnection,
+        ctx: ExecutorContext,
     ) -> std::pin::Pin<Box<dyn std::future::Future<Output = Result<Option<ProgramReturn>, KclError>>>>;
 
 fn force_memory_function<
@@ -149,7 +312,7 @@ fn force_memory_function<
         ProgramMemory,
         Box<FunctionExpression>,
         Vec<Metadata>,
-        EngineConnection,
+        ExecutorContext,
     ) -> std::pin::Pin<Box<dyn std::future::Future<Output = Result<Option<ProgramReturn>, KclError>>>>,
 >(
     f: F,
@@ -165,6 +328,7 @@ impl From<MemoryItem> for Vec<SourceRange> {
             MemoryItem::ExtrudeGroup(e) => e.meta.iter().map(|m| m.source_range).collect(),
             MemoryItem::ExtrudeTransform(e) => e.meta.iter().map(|m| m.source_range).collect(),
             MemoryItem::Function { meta, .. } => meta.iter().map(|m| m.source_range).collect(),
+            MemoryItem::Plane(p) => p.meta.iter().map(|m| m.source_range).collect(),
         }
     }
 }
@@ -187,11 +351,11 @@ impl MemoryItem {
         &self,
         args: Vec<MemoryItem>,
         memory: ProgramMemory,
-        engine: EngineConnection,
+        ctx: ExecutorContext,
     ) -> Result<Option<ProgramReturn>, KclError> {
         if let MemoryItem::Function { func, expression, meta } = &self {
             if let Some(func) = func {
-                func(args, memory, expression.clone(), meta.clone(), engine).await
+                func(args, memory, expression.clone(), meta.clone(), ctx).await
             } else {
                 Err(KclError::Semantic(KclErrorDetails {
                     message: format!("Not a function: {:?}", expression),
@@ -222,6 +386,8 @@ pub struct SketchGroup {
     pub position: Position,
     /// The rotation of the sketch group.
     pub rotation: Rotation,
+    /// The plane id of the sketch group.
+    pub plane_id: Option<uuid::Uuid>,
     /// Metadata.
     #[serde(rename = "__meta")]
     pub meta: Vec<Metadata>,
@@ -414,6 +580,18 @@ pub struct Point3d {
     pub z: f64,
 }
 
+impl Point3d {
+    pub fn new(x: f64, y: f64, z: f64) -> Self {
+        Self { x, y, z }
+    }
+}
+
+impl From<Point3d> for kittycad::types::Point3D {
+    fn from(p: Point3d) -> Self {
+        Self { x: p.x, y: p.y, z: p.z }
+    }
+}
+
 /// Metadata.
 #[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
 #[ts(export)]
@@ -593,12 +771,19 @@ impl Default for PipeInfo {
     }
 }
 
+/// The executor context.
+#[derive(Debug, Clone)]
+pub struct ExecutorContext {
+    pub engine: EngineConnection,
+    pub planes: DefaultPlanes,
+}
+
 /// Execute a AST's program.
 pub async fn execute(
     program: crate::ast::types::Program,
     memory: &mut ProgramMemory,
     options: BodyType,
-    engine: &EngineConnection,
+    ctx: &ExecutorContext,
 ) -> Result<ProgramMemory, KclError> {
     let mut pipe_info = PipeInfo::default();
 
@@ -617,23 +802,23 @@ pub async fn execute(
                                 args.push(memory_item.clone());
                             }
                             Value::CallExpression(call_expr) => {
-                                let result = call_expr.execute(memory, &mut pipe_info, engine).await?;
+                                let result = call_expr.execute(memory, &mut pipe_info, ctx).await?;
                                 args.push(result);
                             }
                             Value::BinaryExpression(binary_expression) => {
-                                let result = binary_expression.get_result(memory, &mut pipe_info, engine).await?;
+                                let result = binary_expression.get_result(memory, &mut pipe_info, ctx).await?;
                                 args.push(result);
                             }
                             Value::UnaryExpression(unary_expression) => {
-                                let result = unary_expression.get_result(memory, &mut pipe_info, engine).await?;
+                                let result = unary_expression.get_result(memory, &mut pipe_info, ctx).await?;
                                 args.push(result);
                             }
                             Value::ObjectExpression(object_expression) => {
-                                let result = object_expression.execute(memory, &mut pipe_info, engine).await?;
+                                let result = object_expression.execute(memory, &mut pipe_info, ctx).await?;
                                 args.push(result);
                             }
                             Value::ArrayExpression(array_expression) => {
-                                let result = array_expression.execute(memory, &mut pipe_info, engine).await?;
+                                let result = array_expression.execute(memory, &mut pipe_info, ctx).await?;
                                 args.push(result);
                             }
                             // We do nothing for the rest.
@@ -651,7 +836,7 @@ pub async fn execute(
 
                         memory.return_ = Some(ProgramReturn::Arguments(call_expr.arguments.clone()));
                     } else if let Some(func) = memory.clone().root.get(&fn_name) {
-                        let result = func.call_fn(args.clone(), memory.clone(), engine.clone()).await?;
+                        let result = func.call_fn(args.clone(), memory.clone(), ctx.clone()).await?;
 
                         memory.return_ = result;
                     } else {
@@ -677,7 +862,7 @@ pub async fn execute(
                             memory.add(&var_name, value.clone(), source_range)?;
                         }
                         Value::BinaryExpression(binary_expression) => {
-                            let result = binary_expression.get_result(memory, &mut pipe_info, engine).await?;
+                            let result = binary_expression.get_result(memory, &mut pipe_info, ctx).await?;
                             memory.add(&var_name, result, source_range)?;
                         }
                         Value::FunctionExpression(function_expression) => {
@@ -686,7 +871,7 @@ pub async fn execute(
                                  memory: ProgramMemory,
                                  function_expression: Box<FunctionExpression>,
                                  _metadata: Vec<Metadata>,
-                                 engine: EngineConnection| {
+                                 ctx: ExecutorContext| {
                                     Box::pin(async move {
                                         let mut fn_memory = memory.clone();
 
@@ -714,7 +899,7 @@ pub async fn execute(
                                             function_expression.body.clone(),
                                             &mut fn_memory,
                                             BodyType::Block,
-                                            &engine,
+                                            &ctx,
                                         )
                                         .await?;
 
@@ -733,11 +918,11 @@ pub async fn execute(
                             )?;
                         }
                         Value::CallExpression(call_expression) => {
-                            let result = call_expression.execute(memory, &mut pipe_info, engine).await?;
+                            let result = call_expression.execute(memory, &mut pipe_info, ctx).await?;
                             memory.add(&var_name, result, source_range)?;
                         }
                         Value::PipeExpression(pipe_expression) => {
-                            let result = pipe_expression.get_result(memory, &mut pipe_info, engine).await?;
+                            let result = pipe_expression.get_result(memory, &mut pipe_info, ctx).await?;
                             memory.add(&var_name, result, source_range)?;
                         }
                         Value::PipeSubstitution(pipe_substitution) => {
@@ -750,11 +935,11 @@ pub async fn execute(
                             }));
                         }
                         Value::ArrayExpression(array_expression) => {
-                            let result = array_expression.execute(memory, &mut pipe_info, engine).await?;
+                            let result = array_expression.execute(memory, &mut pipe_info, ctx).await?;
                             memory.add(&var_name, result, source_range)?;
                         }
                         Value::ObjectExpression(object_expression) => {
-                            let result = object_expression.execute(memory, &mut pipe_info, engine).await?;
+                            let result = object_expression.execute(memory, &mut pipe_info, ctx).await?;
                             memory.add(&var_name, result, source_range)?;
                         }
                         Value::MemberExpression(member_expression) => {
@@ -762,7 +947,7 @@ pub async fn execute(
                             memory.add(&var_name, result, source_range)?;
                         }
                         Value::UnaryExpression(unary_expression) => {
-                            let result = unary_expression.get_result(memory, &mut pipe_info, engine).await?;
+                            let result = unary_expression.get_result(memory, &mut pipe_info, ctx).await?;
                             memory.add(&var_name, result, source_range)?;
                         }
                     }
@@ -770,11 +955,11 @@ pub async fn execute(
             }
             BodyItem::ReturnStatement(return_statement) => match &return_statement.argument {
                 Value::BinaryExpression(bin_expr) => {
-                    let result = bin_expr.get_result(memory, &mut pipe_info, engine).await?;
+                    let result = bin_expr.get_result(memory, &mut pipe_info, ctx).await?;
                     memory.return_ = Some(ProgramReturn::Value(result));
                 }
                 Value::UnaryExpression(unary_expr) => {
-                    let result = unary_expr.get_result(memory, &mut pipe_info, engine).await?;
+                    let result = unary_expr.get_result(memory, &mut pipe_info, ctx).await?;
                     memory.return_ = Some(ProgramReturn::Value(result));
                 }
                 Value::Identifier(identifier) => {
@@ -785,15 +970,15 @@ pub async fn execute(
                     memory.return_ = Some(ProgramReturn::Value(literal.into()));
                 }
                 Value::ArrayExpression(array_expr) => {
-                    let result = array_expr.execute(memory, &mut pipe_info, engine).await?;
+                    let result = array_expr.execute(memory, &mut pipe_info, ctx).await?;
                     memory.return_ = Some(ProgramReturn::Value(result));
                 }
                 Value::ObjectExpression(obj_expr) => {
-                    let result = obj_expr.execute(memory, &mut pipe_info, engine).await?;
+                    let result = obj_expr.execute(memory, &mut pipe_info, ctx).await?;
                     memory.return_ = Some(ProgramReturn::Value(result));
                 }
                 Value::CallExpression(call_expr) => {
-                    let result = call_expr.execute(memory, &mut pipe_info, engine).await?;
+                    let result = call_expr.execute(memory, &mut pipe_info, ctx).await?;
                     memory.return_ = Some(ProgramReturn::Value(result));
                 }
                 Value::MemberExpression(member_expr) => {
@@ -801,7 +986,7 @@ pub async fn execute(
                     memory.return_ = Some(ProgramReturn::Value(result));
                 }
                 Value::PipeExpression(pipe_expr) => {
-                    let result = pipe_expr.get_result(memory, &mut pipe_info, engine).await?;
+                    let result = pipe_expr.get_result(memory, &mut pipe_info, ctx).await?;
                     memory.return_ = Some(ProgramReturn::Value(result));
                 }
                 Value::PipeSubstitution(_) => {}
@@ -825,7 +1010,9 @@ mod tests {
         let program = parser.ast()?;
         let mut mem: ProgramMemory = Default::default();
         let engine = EngineConnection::new().await?;
-        let memory = execute(program, &mut mem, BodyType::Root, &engine).await?;
+        let planes = DefaultPlanes::new(&engine).await?;
+        let ctx = ExecutorContext { engine, planes };
+        let memory = execute(program, &mut mem, BodyType::Root, &ctx).await?;
 
         Ok(memory)
     }
@@ -849,7 +1036,8 @@ const newVar = myVar + 1"#;
     async fn test_execute_angled_line_that_intersects() {
         let ast_fn = |offset: &str| -> String {
             format!(
-                r#"const part001 = startSketchAt([0, 0])
+                r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> lineTo({{to:[2, 2], tag: "yo"}}, %)
   |> lineTo([3, 1], %)
   |> angledLineThatIntersects({{
@@ -896,7 +1084,8 @@ const yo = 5 + 6
 
 const abc = 3
 const identifierGuy = 5
-const part001 = startSketchAt([-1.2, 4.83])
+const part001 = startSketchOn('XY')
+|> startProfileAt([-1.2, 4.83], %)
 |> line([2.8, 0], %)
 |> angledLine([100 + 100, 3.01], %)
 |> angledLine([abc, 3.02], %)
@@ -913,7 +1102,8 @@ show(part001)"#;
     #[tokio::test(flavor = "multi_thread")]
     async fn test_execute_with_pipe_substitutions_unary() {
         let ast = r#"const myVar = 3
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> line({ to: [3, 4], tag: 'seg01' }, %)
   |> line([
   min(segLen('seg01', %), myVar),
@@ -928,7 +1118,8 @@ show(part001)"#;
     #[tokio::test(flavor = "multi_thread")]
     async fn test_execute_with_pipe_substitutions() {
         let ast = r#"const myVar = 3
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> line({ to: [3, 4], tag: 'seg01' }, %)
   |> line([
   min(segLen('seg01', %), myVar),
@@ -951,7 +1142,8 @@ const halfArmAngle = armAngle / 2
 const arrExpShouldNotBeIncluded = [1, 2, 3]
 const objExpShouldNotBeIncluded = { a: 1, b: 2, c: 3 }
 
-const part001 = startSketchAt([0, 0])
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> yLineTo(1, %)
   |> xLine(3.84, %) // selection-range-7ish-before-this
 
@@ -972,7 +1164,8 @@ fn thing = () => {
   return -8
 }
 
-const firstExtrude = startSketchAt([0,0])
+const firstExtrude = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |> line([0, l], %)
   |> line([w, 0], %)
   |> line([0, thing()], %)
@@ -994,7 +1187,8 @@ fn thing = (x) => {
   return -x
 }
 
-const firstExtrude = startSketchAt([0,0])
+const firstExtrude = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |> line([0, l], %)
   |> line([w, 0], %)
   |> line([0, thing(8)], %)
@@ -1016,7 +1210,8 @@ fn thing = (x) => {
   return [0, -x]
 }
 
-const firstExtrude = startSketchAt([0,0])
+const firstExtrude = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |> line([0, l], %)
   |> line([w, 0], %)
   |> line(thing(8), %)
@@ -1042,7 +1237,8 @@ fn thing = (x) => {
   return other_thing(x)
 }
 
-const firstExtrude = startSketchAt([0,0])
+const firstExtrude = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |> line([0, l], %)
   |> line([w, 0], %)
   |> line([0, thing(8)], %)
@@ -1057,7 +1253,8 @@ show(firstExtrude)"#;
     #[tokio::test(flavor = "multi_thread")]
     async fn test_execute_with_function_sketch() {
         let ast = r#"fn box = (h, l, w) => {
- const myBox = startSketchAt([0,0])
+ const myBox = startSketchOn('XY')
+    |> startProfileAt([0,0], %)
     |> line([0, l], %)
     |> line([w, 0], %)
     |> line([0, -l], %)
@@ -1077,7 +1274,8 @@ show(fnBox)"#;
     #[tokio::test(flavor = "multi_thread")]
     async fn test_get_member_of_object_with_function_period() {
         let ast = r#"fn box = (obj) => {
- let myBox = startSketchAt(obj.start)
+ let myBox = startSketchOn('XY')
+    |> startProfileAt(obj.start, %)
     |> line([0, obj.l], %)
     |> line([obj.w, 0], %)
     |> line([0, -obj.l], %)
@@ -1097,7 +1295,8 @@ show(thisBox)
     #[tokio::test(flavor = "multi_thread")]
     async fn test_get_member_of_object_with_function_brace() {
         let ast = r#"fn box = (obj) => {
- let myBox = startSketchAt(obj["start"])
+ let myBox = startSketchOn('XY')
+    |> startProfileAt(obj["start"], %)
     |> line([0, obj["l"]], %)
     |> line([obj["w"], 0], %)
     |> line([0, -obj["l"]], %)
@@ -1117,7 +1316,8 @@ show(thisBox)
     #[tokio::test(flavor = "multi_thread")]
     async fn test_get_member_of_object_with_function_mix_period_brace() {
         let ast = r#"fn box = (obj) => {
- let myBox = startSketchAt(obj["start"])
+ let myBox = startSketchOn('XY')
+    |> startProfileAt(obj["start"], %)
     |> line([0, obj["l"]], %)
     |> line([obj["w"], 0], %)
     |> line([10 - obj["w"], -obj.l], %)
@@ -1138,7 +1338,8 @@ show(thisBox)
     #[ignore] // ignore til we get loops
     async fn test_execute_with_function_sketch_loop_objects() {
         let ast = r#"fn box = (obj) => {
- let myBox = startSketchAt(obj.start)
+let myBox = startSketchOn('XY')
+    |> startProfileAt(obj.start, %)
     |> line([0, obj.l], %)
     |> line([obj.w, 0], %)
     |> line([0, -obj.l], %)
@@ -1160,7 +1361,8 @@ for var in [{start: [0,0], l: 6, w: 10, h: 3}, {start: [-10,-10], l: 3, w: 5, h:
     #[ignore] // ignore til we get loops
     async fn test_execute_with_function_sketch_loop_array() {
         let ast = r#"fn box = (h, l, w, start) => {
- const myBox = startSketchAt([0,0])
+ const myBox = startSketchOn('XY')
+    |> startProfileAt([0,0], %)
     |> line([0, l], %)
     |> line([w, 0], %)
     |> line([0, -l], %)
@@ -1182,7 +1384,8 @@ for var in [[3, 6, 10, [0,0]], [1.5, 3, 5, [-10,-10]]] {
     #[tokio::test(flavor = "multi_thread")]
     async fn test_get_member_of_array_with_function() {
         let ast = r#"fn box = (array) => {
- let myBox = startSketchAt(array[0])
+ let myBox =startSketchOn('XY')
+    |> startProfileAt(array[0], %)
     |> line([0, array[1]], %)
     |> line([array[2], 0], %)
     |> line([0, -array[1]], %)
@@ -1256,7 +1459,8 @@ const leg1 = 5 // inches
 const leg2 = 8 // inches
 fn thickness = () => { return 0.56 }
 
-const bracket = startSketchAt([0,0])
+const bracket = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |> line([0, leg1], %)
   |> line([leg2, 0], %)
   |> line([0, -thickness()], %)
@@ -1280,7 +1484,8 @@ const leg2 = 8 // inches
 const thickness_squared = distance * p * FOS * 6 / sigmaAllow
 const thickness = 0.56 // inches. App does not support square root function yet
 
-const bracket = startSketchAt([0,0])
+const bracket = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |> line([0, leg1], %)
   |> line([leg2, 0], %)
   |> line([0, -thickness], %)
@@ -1300,7 +1505,8 @@ const leg1 = 5 // inches
 const leg2 = 8 // inches
 const thickness_squared = (distance * p * FOS * 6 / (sigmaAllow - width))
 const thickness = 0.32 // inches. App does not support square root function yet
-const bracket = startSketchAt([0,0])
+const bracket = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
     |> line([0, leg1], %)
   |> line([leg2, 0], %)
   |> line([0, -thickness], %)
@@ -1324,7 +1530,8 @@ const leg1 = 5 // inches
 const leg2 = 8 // inches
 const thickness_squared = distance * p * FOS * 6 / (sigmaAllow - width)
 const thickness = 0.32 // inches. App does not support square root function yet
-const bracket = startSketchAt([0,0])
+const bracket = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
     |> line([0, leg1], %)
   |> line([leg2, 0], %)
   |> line([0, -thickness], %)

src/wasm-lib/kcl/src/parser.rs

@@ -552,7 +552,7 @@ impl Parser {
         _previous_keys: Option<Vec<ObjectKeyInfo>>,
         has_opening_brace: bool,
     ) -> Result<Vec<ObjectKeyInfo>, KclError> {
-        let previous_keys = _previous_keys.unwrap_or(vec![]);
+        let previous_keys = _previous_keys.unwrap_or_default();
         let next_token = self.next_meaningful_token(index, None)?;
         if next_token.index == self.tokens.len() - 1 {
             return Ok(previous_keys);
@@ -1918,28 +1918,6 @@ const key = 'c'"#,
             31,
         );
         assert_eq!(parser.make_non_code_node(index).unwrap(), expected_output);
-        let tokens = crate::token::lexer(
-            r#"const mySketch = startSketchAt([0,0])
-  |> lineTo({ to: [0, 1], tag: 'myPath' }, %)
-  |> lineTo([1, 1], %) /* this is
-      a comment
-      spanning a few lines */
-  |> lineTo({ to: [1,0], tag: "rightPath" }, %)
-  |> close(%)"#,
-        );
-        let parser = Parser::new(tokens);
-        let index = 57;
-        let expected_output = (
-            Some(NonCodeNode {
-                start: 106,
-                end: 166,
-                value: NonCodeValue::BlockComment {
-                    value: "this is\n      a comment\n      spanning a few lines".to_string(),
-                },
-            }),
-            59,
-        );
-        assert_eq!(parser.make_non_code_node(index).unwrap(), expected_output);
     }
 
     #[test]
@@ -2070,7 +2048,8 @@ const key = 'c'"#,
     fn test_next_meaningful_token() {
         let _offset = 1;
         let tokens = crate::token::lexer(
-            r#"const mySketch = startSketchAt([0,0])
+            r#"const mySketch = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |> lineTo({ to: [0, 1], tag: 'myPath' }, %)
   |> lineTo([1, 1], %) /* this is
       a comment
@@ -2082,10 +2061,10 @@ const key = 'c'"#,
         let index = 17;
         let expected_output = TokenReturnWithNonCode {
             token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 49,
-                end: 50,
-                value: "(".to_string(),
+                token_type: TokenType::Number,
+                start: 60,
+                end: 61,
+                value: "0".to_string(),
             }),
             index: 18,
             non_code_node: None,
@@ -2095,9 +2074,9 @@ const key = 'c'"#,
         let expected_output = TokenReturnWithNonCode {
             token: Some(Token {
                 token_type: TokenType::Brace,
-                start: 50,
-                end: 51,
-                value: "{".to_string(),
+                start: 61,
+                end: 62,
+                value: "]".to_string(),
             }),
             index: 19,
             non_code_node: None,
@@ -2106,10 +2085,10 @@ const key = 'c'"#,
         let index = 21;
         let expected_output = TokenReturnWithNonCode {
             token: Some(Token {
-                token_type: TokenType::Colon,
-                start: 54,
-                end: 55,
-                value: ":".to_string(),
+                token_type: TokenType::Operator,
+                start: 64,
+                end: 65,
+                value: "%".to_string(),
             }),
             index: 22,
             non_code_node: None,
@@ -2118,10 +2097,10 @@ const key = 'c'"#,
         let index = 24;
         let expected_output = TokenReturnWithNonCode {
             token: Some(Token {
-                token_type: TokenType::Number,
-                start: 57,
-                end: 58,
-                value: "0".to_string(),
+                token_type: TokenType::Operator,
+                start: 69,
+                end: 71,
+                value: "|>".to_string(),
             }),
             index: 25,
             non_code_node: None,
@@ -2130,324 +2109,12 @@ const key = 'c'"#,
         let index = 25;
         let expected_output = TokenReturnWithNonCode {
             token: Some(Token {
-                token_type: TokenType::Comma,
-                start: 58,
-                end: 59,
-                value: ",".to_string(),
+                token_type: TokenType::Word,
+                start: 72,
+                end: 78,
+                value: "lineTo".to_string(),
             }),
-            index: 26,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 28;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 61,
-                end: 62,
-                value: "]".to_string(),
-            }),
-            index: 29,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 29;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Comma,
-                start: 62,
-                end: 63,
-                value: ",".to_string(),
-            }),
-            index: 30,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 32;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Colon,
-                start: 67,
-                end: 68,
-                value: ":".to_string(),
-            }),
-            index: 33,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 37;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Comma,
-                start: 79,
-                end: 80,
-                value: ",".to_string(),
-            }),
-            index: 38,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 40;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 82,
-                end: 83,
-                value: ")".to_string(),
-            }),
-            index: 41,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 45;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 95,
-                end: 96,
-                value: "(".to_string(),
-            }),
-            index: 46,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 46;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 96,
-                end: 97,
-                value: "[".to_string(),
-            }),
-            index: 47,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 47;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Number,
-                start: 97,
-                end: 98,
-                value: "1".to_string(),
-            }),
-            index: 48,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 48;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Comma,
-                start: 98,
-                end: 99,
-                value: ",".to_string(),
-            }),
-            index: 49,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 51;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 101,
-                end: 102,
-                value: "]".to_string(),
-            }),
-            index: 52,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 52;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Comma,
-                start: 102,
-                end: 103,
-                value: ",".to_string(),
-            }),
-            index: 53,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 55;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 105,
-                end: 106,
-                value: ")".to_string(),
-            }),
-            index: 56,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 62;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 175,
-                end: 176,
-                value: "(".to_string(),
-            }),
-            index: 63,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 63;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 176,
-                end: 177,
-                value: "{".to_string(),
-            }),
-            index: 64,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 66;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Colon,
-                start: 180,
-                end: 181,
-                value: ":".to_string(),
-            }),
-            index: 67,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 69;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Number,
-                start: 183,
-                end: 184,
-                value: "1".to_string(),
-            }),
-            index: 70,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 70;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Comma,
-                start: 184,
-                end: 185,
-                value: ",".to_string(),
-            }),
-            index: 71,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 71;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Number,
-                start: 185,
-                end: 186,
-                value: "0".to_string(),
-            }),
-            index: 72,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 72;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 186,
-                end: 187,
-                value: "]".to_string(),
-            }),
-            index: 73,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 73;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Comma,
-                start: 187,
-                end: 188,
-                value: ",".to_string(),
-            }),
-            index: 74,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 76;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Colon,
-                start: 192,
-                end: 193,
-                value: ":".to_string(),
-            }),
-            index: 77,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 81;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Comma,
-                start: 207,
-                end: 208,
-                value: ",".to_string(),
-            }),
-            index: 82,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 84;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 210,
-                end: 211,
-                value: ")".to_string(),
-            }),
-            index: 85,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 89;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 222,
-                end: 223,
-                value: "(".to_string(),
-            }),
-            index: 90,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 90;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Operator,
-                start: 223,
-                end: 224,
-                value: "%".to_string(),
-            }),
-            index: 91,
-            non_code_node: None,
-        };
-        assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
-        let index = 91;
-        let expected_output = TokenReturnWithNonCode {
-            token: Some(Token {
-                token_type: TokenType::Brace,
-                start: 224,
-                end: 225,
-                value: ")".to_string(),
-            }),
-            index: 92,
+            index: 27,
             non_code_node: None,
         };
         assert_eq!(parser.next_meaningful_token(index, None).unwrap(), expected_output);
@@ -2456,7 +2123,8 @@ const key = 'c'"#,
     #[test]
     fn test_find_closing_brace() {
         let tokens = crate::token::lexer(
-            r#"const mySketch = startSketchAt([0,0])
+            r#"const mySketch = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
 |> lineTo({ to: [0, 1], tag: 'myPath' }, %)
 |> lineTo([1, 1], %) /* this is
   a comment
@@ -2465,11 +2133,10 @@ const key = 'c'"#,
 |> close(%)"#,
         );
         let parser = Parser::new(tokens);
-        assert_eq!(parser.find_closing_brace(7, 0, "").unwrap(), 13);
-        assert_eq!(parser.find_closing_brace(18, 0, "").unwrap(), 41);
-        assert_eq!(parser.find_closing_brace(46, 0, "").unwrap(), 56);
-        assert_eq!(parser.find_closing_brace(63, 0, "").unwrap(), 85);
-        assert_eq!(parser.find_closing_brace(90, 0, "").unwrap(), 92);
+        assert_eq!(parser.find_closing_brace(7, 0, "").unwrap(), 9);
+        assert_eq!(parser.find_closing_brace(14, 0, "").unwrap(), 23);
+        assert_eq!(parser.find_closing_brace(29, 0, "").unwrap(), 47);
+        assert_eq!(parser.find_closing_brace(57, 0, "").unwrap(), 62);
 
         let basic = "( hey )";
         let parser = Parser::new(crate::token::lexer(basic));
@@ -2490,7 +2157,8 @@ const key = 'c'"#,
     #[test]
     fn test_is_call_expression() {
         let tokens = crate::token::lexer(
-            r#"const mySketch = startSketchAt([0,0])
+            r#"const mySketch = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
 |> lineTo({ to: [0, 1], tag: 'myPath' }, %)
 |> lineTo([1, 1], %) /* this is
   a comment
@@ -2501,8 +2169,8 @@ const key = 'c'"#,
         let parser = Parser::new(tokens);
 
         assert_eq!(parser.is_call_expression(4).unwrap(), None);
-        assert_eq!(parser.is_call_expression(6).unwrap(), Some(13));
-        assert_eq!(parser.is_call_expression(15).unwrap(), None);
+        assert_eq!(parser.is_call_expression(6).unwrap(), Some(9));
+        assert_eq!(parser.is_call_expression(9).unwrap(), None);
         assert_eq!(parser.is_call_expression(43).unwrap(), None);
         assert_eq!(parser.is_call_expression(60).unwrap(), None);
         assert_eq!(parser.is_call_expression(87).unwrap(), None);
@@ -2511,7 +2179,8 @@ const key = 'c'"#,
     #[test]
     fn test_find_next_declaration_keyword() {
         let tokens = crate::token::lexer(
-            r#"const mySketch = startSketchAt([0,0])
+            r#"const mySketch = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
 |> lineTo({ to: [0, 1], tag: 'myPath' }, %)
 |> lineTo([1, 1], %) /* this is
   a comment
@@ -2522,7 +2191,10 @@ const key = 'c'"#,
         let parser = Parser::new(tokens);
         assert_eq!(
             parser.find_next_declaration_keyword(4).unwrap(),
-            TokenReturn { token: None, index: 92 }
+            TokenReturn {
+                token: None,
+                index: 102
+            }
         );
 
         let tokens = crate::token::lexer(
@@ -2986,7 +2658,8 @@ show(mySk1)"#;
     #[test]
     fn test_parse_half_pipe_small() {
         let tokens = crate::token::lexer(
-            "const secondExtrude = startSketchAt([0,0])
+            "const secondExtrude = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |",
         );
         let parser = Parser::new(tokens);
@@ -3067,7 +2740,8 @@ const height = [obj["a"] -1, 0]"#,
         let tokens = crate::token::lexer(
             "const height = 10
 
-const firstExtrude = startSketchAt([0,0])
+const firstExtrude = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |> line([0, 8], %)
   |> line([20, 0], %)
   |> line([0, -8], %)
@@ -3076,7 +2750,8 @@ const firstExtrude = startSketchAt([0,0])
 
 show(firstExtrude)
 
-const secondExtrude = startSketchAt([0,0])
+const secondExtrude = startSketchOn('XY')
+  |> startProfileAt([0,0], %)
   |",
         );
         let parser = Parser::new(tokens);
@@ -3457,7 +3132,8 @@ thing(false)
     #[test]
     fn test_member_expression_sketch_group() {
         let some_program_string = r#"fn cube = (pos, scale) => {
-  const sg = startSketchAt(pos)
+  const sg = startSketchOn('XY')
+  |> startProfileAt(pos, %)
     |> line([0, scale], %)
     |> line([scale, 0], %)
     |> line([0, -scale], %)
@@ -3499,7 +3175,8 @@ let other_thing = 2 * cos(3)"#;
     #[test]
     fn test_negative_arguments() {
         let some_program_string = r#"fn box = (p, h, l, w) => {
- const myBox = startSketchAt(p)
+ const myBox = startSketchOn('XY')
+    |> startProfileAt(p, %)
     |> line([0, l], %)
     |> line([w, 0], %)
     |> line([0, -l], %)

src/wasm-lib/kcl/src/std/mod.rs

@@ -17,9 +17,9 @@ use serde::{Deserialize, Serialize};
 
 use crate::{
     ast::types::parse_json_number_as_f64,
-    engine::{EngineConnection, EngineManager},
+    engine::EngineManager,
     errors::{KclError, KclErrorDetails},
-    executor::{ExtrudeGroup, MemoryItem, Metadata, SketchGroup, SourceRange},
+    executor::{ExecutorContext, ExtrudeGroup, MemoryItem, Metadata, Plane, SketchGroup, SourceRange},
 };
 
 pub type StdFn = fn(Args) -> std::pin::Pin<Box<dyn std::future::Future<Output = Result<MemoryItem, KclError>>>>;
@@ -59,6 +59,8 @@ impl StdLib {
             Box::new(crate::std::sketch::AngledLineOfYLength),
             Box::new(crate::std::sketch::AngledLineThatIntersects),
             Box::new(crate::std::sketch::StartSketchAt),
+            Box::new(crate::std::sketch::StartSketchOn),
+            Box::new(crate::std::sketch::StartProfileAt),
             Box::new(crate::std::sketch::Close),
             Box::new(crate::std::sketch::Arc),
             Box::new(crate::std::sketch::TangentalArc),
@@ -109,15 +111,15 @@ impl Default for StdLib {
 pub struct Args {
     pub args: Vec<MemoryItem>,
     pub source_range: SourceRange,
-    engine: EngineConnection,
+    pub ctx: ExecutorContext,
 }
 
 impl Args {
-    pub fn new(args: Vec<MemoryItem>, source_range: SourceRange, engine: EngineConnection) -> Self {
+    pub fn new(args: Vec<MemoryItem>, source_range: SourceRange, ctx: ExecutorContext) -> Self {
         Self {
             args,
             source_range,
-            engine,
+            ctx,
         }
     }
 
@@ -126,7 +128,7 @@ impl Args {
         id: uuid::Uuid,
         cmd: kittycad::types::ModelingCmd,
     ) -> Result<OkWebSocketResponseData, KclError> {
-        self.engine.send_modeling_cmd(id, self.source_range, cmd).await
+        self.ctx.engine.send_modeling_cmd(id, self.source_range, cmd).await
     }
 
     fn make_user_val_from_json(&self, j: serde_json::Value) -> Result<MemoryItem, KclError> {
@@ -308,6 +310,44 @@ impl Args {
         Ok((data, sketch_group))
     }
 
+    fn get_data_and_plane<T: serde::de::DeserializeOwned>(&self) -> Result<(T, Box<Plane>), KclError> {
+        let first_value = self
+            .args
+            .first()
+            .ok_or_else(|| {
+                KclError::Type(KclErrorDetails {
+                    message: format!("Expected a struct as the first argument, found `{:?}`", self.args),
+                    source_ranges: vec![self.source_range],
+                })
+            })?
+            .get_json_value()?;
+
+        let data: T = serde_json::from_value(first_value).map_err(|e| {
+            KclError::Type(KclErrorDetails {
+                message: format!("Failed to deserialize struct from JSON: {}", e),
+                source_ranges: vec![self.source_range],
+            })
+        })?;
+
+        let second_value = self.args.get(1).ok_or_else(|| {
+            KclError::Type(KclErrorDetails {
+                message: format!("Expected a Plane as the second argument, found `{:?}`", self.args),
+                source_ranges: vec![self.source_range],
+            })
+        })?;
+
+        let plane = if let MemoryItem::Plane(p) = second_value {
+            p.clone()
+        } else {
+            return Err(KclError::Type(KclErrorDetails {
+                message: format!("Expected a Plane as the second argument, found `{:?}`", self.args),
+                source_ranges: vec![self.source_range],
+            }));
+        };
+
+        Ok((data, plane))
+    }
+
     fn get_segment_name_to_number_sketch_group(&self) -> Result<(String, f64, Box<SketchGroup>), KclError> {
         // Iterate over our args, the first argument should be a UserVal with a string value.
         // The second argument should be a number.

src/wasm-lib/kcl/src/std/sketch.rs

@@ -9,7 +9,9 @@ use serde::{Deserialize, Serialize};
 use super::utils::Angle;
 use crate::{
     errors::{KclError, KclErrorDetails},
-    executor::{BasePath, GeoMeta, MemoryItem, Path, Point2d, Position, Rotation, SketchGroup},
+    executor::{
+        BasePath, GeoMeta, MemoryItem, Path, Plane, PlaneType, Point2d, Point3d, Position, Rotation, SketchGroup,
+    },
     std::{
         utils::{arc_angles, arc_center_and_end, get_x_component, get_y_component, intersection_with_parallel_line},
         Args,
@@ -649,11 +651,202 @@ pub async fn start_sketch_at(args: Args) -> Result<MemoryItem, KclError> {
     Ok(MemoryItem::SketchGroup(sketch_group))
 }
 
-/// Start a sketch at a given point.
+/// Start a sketch at a given point on the 'XY' plane.
 #[stdlib {
     name = "startSketchAt",
 }]
 async fn inner_start_sketch_at(data: LineData, args: Args) -> Result<Box<SketchGroup>, KclError> {
+    // Let's assume it's the XY plane for now, this is just for backwards compatibility.
+    let xy_plane = PlaneData::XY;
+    let plane = inner_start_sketch_on(xy_plane, args.clone()).await?;
+    let sketch_group = inner_start_profile_at(data, plane, args).await?;
+    Ok(sketch_group)
+}
+
+/// Data for a plane.
+#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
+#[ts(export)]
+#[serde(rename_all = "camelCase")]
+pub enum PlaneData {
+    /// The XY plane.
+    #[serde(rename = "XY", alias = "xy")]
+    XY,
+    /// The opposite side of the XY plane.
+    #[serde(rename = "-XY", alias = "-xy")]
+    NegXY,
+    /// The XZ plane.
+    #[serde(rename = "XZ", alias = "xz")]
+    XZ,
+    /// The opposite side of the XZ plane.
+    #[serde(rename = "-XZ", alias = "-xz")]
+    NegXZ,
+    /// The YZ plane.
+    #[serde(rename = "YZ", alias = "yz")]
+    YZ,
+    /// The opposite side of the YZ plane.
+    #[serde(rename = "-YZ", alias = "-yz")]
+    NegYZ,
+    /// A defined plane.
+    Plane {
+        /// Origin of the plane.
+        origin: Box<Point3d>,
+        /// What should the plane’s X axis be?
+        x_axis: Box<Point3d>,
+        /// What should the plane’s Y axis be?
+        y_axis: Box<Point3d>,
+        /// The z-axis (normal).
+        z_axis: Box<Point3d>,
+    },
+}
+
+impl From<PlaneData> for Plane {
+    fn from(value: PlaneData) -> Self {
+        let id = uuid::Uuid::new_v4();
+        match value {
+            PlaneData::XY => Plane {
+                id,
+                origin: Point3d::new(0.0, 0.0, 0.0),
+                x_axis: Point3d::new(1.0, 0.0, 0.0),
+                y_axis: Point3d::new(0.0, 1.0, 0.0),
+                z_axis: Point3d::new(0.0, 0.0, 1.0),
+                value: PlaneType::XY,
+                meta: vec![],
+            },
+            PlaneData::NegXY => Plane {
+                id,
+                origin: Point3d::new(0.0, 0.0, 0.0),
+                x_axis: Point3d::new(1.0, 0.0, 0.0),
+                y_axis: Point3d::new(0.0, 1.0, 0.0),
+                z_axis: Point3d::new(0.0, 0.0, -1.0),
+                value: PlaneType::XY,
+                meta: vec![],
+            },
+            PlaneData::XZ => Plane {
+                id,
+                origin: Point3d::new(0.0, 0.0, 0.0),
+                x_axis: Point3d::new(1.0, 0.0, 0.0),
+                y_axis: Point3d::new(0.0, 0.0, 1.0),
+                z_axis: Point3d::new(0.0, 1.0, 0.0),
+                value: PlaneType::XZ,
+                meta: vec![],
+            },
+            PlaneData::NegXZ => Plane {
+                id,
+                origin: Point3d::new(0.0, 0.0, 0.0),
+                x_axis: Point3d::new(1.0, 0.0, 0.0),
+                y_axis: Point3d::new(0.0, 0.0, 1.0),
+                z_axis: Point3d::new(0.0, -1.0, 0.0),
+                value: PlaneType::XZ,
+                meta: vec![],
+            },
+            PlaneData::YZ => Plane {
+                id,
+                origin: Point3d::new(0.0, 0.0, 0.0),
+                x_axis: Point3d::new(0.0, 1.0, 0.0),
+                y_axis: Point3d::new(0.0, 0.0, 1.0),
+                z_axis: Point3d::new(1.0, 0.0, 0.0),
+                value: PlaneType::YZ,
+                meta: vec![],
+            },
+            PlaneData::NegYZ => Plane {
+                id,
+                origin: Point3d::new(0.0, 0.0, 0.0),
+                x_axis: Point3d::new(0.0, 1.0, 0.0),
+                y_axis: Point3d::new(0.0, 0.0, 1.0),
+                z_axis: Point3d::new(-1.0, 0.0, 0.0),
+                value: PlaneType::YZ,
+                meta: vec![],
+            },
+            PlaneData::Plane {
+                origin,
+                x_axis,
+                y_axis,
+                z_axis,
+            } => Plane {
+                id,
+                origin: *origin,
+                x_axis: *x_axis,
+                y_axis: *y_axis,
+                z_axis: *z_axis,
+                value: PlaneType::Custom,
+                meta: vec![],
+            },
+        }
+    }
+}
+
+/// Start a sketch on a specific plane.
+pub async fn start_sketch_on(args: Args) -> Result<MemoryItem, KclError> {
+    let data: PlaneData = args.get_data()?;
+
+    let plane = inner_start_sketch_on(data, args).await?;
+    Ok(MemoryItem::Plane(plane))
+}
+
+/// Start a sketch at a given point.
+#[stdlib {
+    name = "startSketchOn",
+}]
+async fn inner_start_sketch_on(data: PlaneData, args: Args) -> Result<Box<Plane>, KclError> {
+    let mut plane: Plane = data.clone().into();
+
+    plane.id = match data {
+        PlaneData::XY | PlaneData::NegXY => args.ctx.planes.xy,
+        PlaneData::XZ | PlaneData::NegXZ => args.ctx.planes.xz,
+        PlaneData::YZ | PlaneData::NegYZ => args.ctx.planes.yz,
+        PlaneData::Plane {
+            origin,
+            x_axis,
+            y_axis,
+            z_axis: _,
+        } => {
+            let id = uuid::Uuid::new_v4();
+            // Create the plane.
+            args.send_modeling_cmd(
+                id,
+                ModelingCmd::MakePlane {
+                    clobber: false,
+                    origin: (*origin).into(),
+                    size: 60.0,
+                    x_axis: (*x_axis).into(),
+                    y_axis: (*y_axis).into(),
+                    hide: Some(true),
+                },
+            )
+            .await?;
+            id
+        }
+    };
+
+    // Enter sketch mode on the plane.
+    args.send_modeling_cmd(
+        uuid::Uuid::new_v4(),
+        ModelingCmd::SketchModeEnable {
+            animated: false,
+            ortho: false,
+            plane_id: plane.id,
+            // We pass in the normal for the plane here.
+            disable_camera_with_plane: Some(plane.z_axis.clone().into()),
+        },
+    )
+    .await?;
+
+    Ok(Box::new(plane))
+}
+
+/// Start a profile at a given point.
+pub async fn start_profile_at(args: Args) -> Result<MemoryItem, KclError> {
+    let (data, plane): (LineData, Box<Plane>) = args.get_data_and_plane()?;
+
+    let sketch_group = inner_start_profile_at(data, plane, args).await?;
+    Ok(MemoryItem::SketchGroup(sketch_group))
+}
+
+/// Start a profile at a given point.
+#[stdlib {
+    name = "startProfileAt",
+}]
+async fn inner_start_profile_at(data: LineData, plane: Box<Plane>, args: Args) -> Result<Box<SketchGroup>, KclError> {
     let to = match &data {
         LineData::PointWithTag { to, .. } => *to,
         LineData::Point(to) => *to,
@@ -694,6 +887,7 @@ async fn inner_start_sketch_at(data: LineData, args: Args) -> Result<Box<SketchG
         id: path_id,
         position: Position([0.0, 0.0, 0.0]),
         rotation: Rotation([0.0, 0.0, 0.0, 1.0]),
+        plane_id: Some(plane.id),
         value: vec![],
         start: current_path,
         meta: vec![args.source_range.into()],
@@ -728,6 +922,13 @@ async fn inner_close(sketch_group: Box<SketchGroup>, args: Args) -> Result<Box<S
     )
     .await?;
 
+    // Exit sketch mode, since if we were in a plane we'd want to disable the sketch mode after.
+    if sketch_group.plane_id.is_some() {
+        // We were on a plane, disable the sketch mode.
+        args.send_modeling_cmd(uuid::Uuid::new_v4(), ModelingCmd::SketchModeDisable {})
+            .await?;
+    }
+
     let mut new_sketch_group = sketch_group.clone();
     new_sketch_group.value.push(Path::ToPoint {
         base: BasePath {
@@ -1199,7 +1400,7 @@ mod tests {
 
     use pretty_assertions::assert_eq;
 
-    use crate::std::sketch::LineData;
+    use crate::std::sketch::{LineData, PlaneData};
 
     #[test]
     fn test_deserialize_line_data() {
@@ -1221,4 +1422,23 @@ mod tests {
             }
         );
     }
+
+    #[test]
+    fn test_deserialize_plane_data() {
+        let data = PlaneData::XY;
+        let mut str_json = serde_json::to_string(&data).unwrap();
+        assert_eq!(str_json, "\"XY\"");
+
+        str_json = "\"YZ\"".to_string();
+        let data: PlaneData = serde_json::from_str(&str_json).unwrap();
+        assert_eq!(data, PlaneData::YZ);
+
+        str_json = "\"-YZ\"".to_string();
+        let data: PlaneData = serde_json::from_str(&str_json).unwrap();
+        assert_eq!(data, PlaneData::NegYZ);
+
+        str_json = "\"-xz\"".to_string();
+        let data: PlaneData = serde_json::from_str(&str_json).unwrap();
+        assert_eq!(data, PlaneData::NegXZ);
+    }
 }

src/wasm-lib/kcl/src/token/tokeniser.rs

@@ -1434,13 +1434,13 @@ const things = "things"
     fn test_kitt() {
         let program = include_str!("../../../tests/executor/inputs/kittycad_svg.kcl");
         let actual = lexer(program).unwrap();
-        assert_eq!(actual.len(), 5088);
+        assert_eq!(actual.len(), 5098);
     }
     #[test]
     fn test_pipes_on_pipes() {
         let program = include_str!("../../../tests/executor/inputs/pipes_on_pipes.kcl");
         let actual = lexer(program).unwrap();
-        assert_eq!(actual.len(), 17836);
+        assert_eq!(actual.len(), 17846);
     }
     #[test]
     fn test_lexer_negative_word() {

src/wasm-lib/src/lib.rs

@@ -16,16 +16,21 @@ pub async fn execute_wasm(
     program_str: &str,
     memory_str: &str,
     manager: kcl_lib::engine::conn_wasm::EngineCommandManager,
+    planes_str: &str,
 ) -> Result<JsValue, String> {
     // deserialize the ast from a stringified json
+
+    use kcl_lib::executor::ExecutorContext;
     let program: kcl_lib::ast::types::Program = serde_json::from_str(program_str).map_err(|e| e.to_string())?;
+    let planes: kcl_lib::executor::DefaultPlanes = serde_json::from_str(planes_str).map_err(|e| e.to_string())?;
     let mut mem: kcl_lib::executor::ProgramMemory = serde_json::from_str(memory_str).map_err(|e| e.to_string())?;
 
     let engine = kcl_lib::engine::EngineConnection::new(manager)
         .await
         .map_err(|e| format!("{:?}", e))?;
+    let ctx = ExecutorContext { engine, planes };
 
-    let memory = kcl_lib::executor::execute(program, &mut mem, kcl_lib::executor::BodyType::Root, &engine)
+    let memory = kcl_lib::executor::execute(program, &mut mem, kcl_lib::executor::BodyType::Root, &ctx)
         .await
         .map_err(String::from)?;
     // The serde-wasm-bindgen does not work here because of weird HashMap issues so we use the
@@ -40,11 +45,14 @@ pub async fn modify_ast_for_sketch_wasm(
     manager: kcl_lib::engine::conn_wasm::EngineCommandManager,
     program_str: &str,
     sketch_name: &str,
+    plane_type: &str,
     sketch_id: &str,
 ) -> Result<JsValue, String> {
     // deserialize the ast from a stringified json
     let mut program: kcl_lib::ast::types::Program = serde_json::from_str(program_str).map_err(|e| e.to_string())?;
 
+    let plane: kcl_lib::executor::PlaneType = serde_json::from_str(plane_type).map_err(|e| e.to_string())?;
+
     let mut engine = kcl_lib::engine::EngineConnection::new(manager)
         .await
         .map_err(|e| format!("{:?}", e))?;
@@ -53,6 +61,7 @@ pub async fn modify_ast_for_sketch_wasm(
         &mut engine,
         &mut program,
         sketch_name,
+        plane,
         uuid::Uuid::parse_str(sketch_id).map_err(|e| e.to_string())?,
     )
     .await

src/wasm-lib/tests/executor/inputs/kittycad_svg.kcl

@@ -1,4 +1,5 @@
-const svg = startSketchAt([0, 0])
+const svg = startSketchOn('XY')
+    |> startProfileAt([0, 0], %)
 
 |> lineTo([2.52, -26.04], %) // MoveAbsolute
 |> lineTo([2.52, -25.2], %) // VerticalLineAbsolute

src/wasm-lib/tests/executor/inputs/pipes_on_pipes.kcl

@@ -1,4 +1,5 @@
-const svg = startSketchAt([0, 0])
+const svg =  startSketchOn('XY')
+    |> startProfileAt([0, 0], %)
 
 |> lineTo([22.687663, -2.7664351], %) // MoveRelative
 |> lineTo([15.687664000000002, -5.7664351], %) // MoveRelative

src/wasm-lib/tests/executor/main.rs

@@ -37,10 +37,13 @@ async fn execute_and_snapshot(code: &str) -> Result<image::DynamicImage> {
     let program = parser.ast()?;
     let mut mem: kcl_lib::executor::ProgramMemory = Default::default();
     let engine = kcl_lib::engine::EngineConnection::new(ws).await?;
-    let _ = kcl_lib::executor::execute(program, &mut mem, kcl_lib::executor::BodyType::Root, &engine).await?;
+    let planes = kcl_lib::executor::DefaultPlanes::new(&engine).await?;
+    let ctx = kcl_lib::executor::ExecutorContext { engine, planes };
+    let _ = kcl_lib::executor::execute(program, &mut mem, kcl_lib::executor::BodyType::Root, &ctx).await?;
 
     // Send a snapshot request to the engine.
-    let resp = engine
+    let resp = ctx
+        .engine
         .send_modeling_cmd(
             uuid::Uuid::new_v4(),
             kcl_lib::executor::SourceRange::default(),
@@ -68,7 +71,8 @@ async fn execute_and_snapshot(code: &str) -> Result<image::DynamicImage> {
 #[tokio::test(flavor = "multi_thread")]
 async fn serial_test_execute_with_function_sketch() {
     let code = r#"fn box = (h, l, w) => {
- const myBox = startSketchAt([0,0])
+ const myBox = startSketchOn('XY')
+    |> startProfileAt([0,0], %)
     |> line([0, l], %)
     |> line([w, 0], %)
     |> line([0, -l], %)
@@ -89,7 +93,8 @@ show(fnBox)"#;
 #[tokio::test(flavor = "multi_thread")]
 async fn serial_test_execute_with_function_sketch_with_position() {
     let code = r#"fn box = (p, h, l, w) => {
- const myBox = startSketchAt(p)
+ const myBox = startSketchOn('XY')
+    |> startProfileAt(p, %)
     |> line([0, l], %)
     |> line([w, 0], %)
     |> line([0, -l], %)
@@ -107,7 +112,8 @@ show(box([0,0], 3, 6, 10))"#;
 
 #[tokio::test(flavor = "multi_thread")]
 async fn serial_test_execute_with_angled_line() {
-    let code = r#"const part001 = startSketchAt([4.83, 12.56])
+    let code = r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([4.83, 12.56], %)
   |> line([15.1, 2.48], %)
   |> line({ to: [3.15, -9.85], tag: 'seg01' }, %)
   |> line([-15.17, -4.1], %)
@@ -133,7 +139,8 @@ const FOS = 2
 const leg1 = 5 // inches
 const leg2 = 8 // inches
 const thickness = sqrt(distance * p * FOS * 6 / sigmaAllow / width) // inches
-const bracket = startSketchAt([0, 0])
+const bracket = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
   |> line([0, leg1], %)
   |> line([leg2, 0], %)
   |> line([0, -thickness], %)
@@ -185,7 +192,8 @@ show(bracket)"#;
 
 #[tokio::test(flavor = "multi_thread")]
 async fn serial_test_execute_engine_error_return() {
-    let code = r#"const part001 = startSketchAt([5.5229, 5.25217])
+    let code = r#"const part001 = startSketchOn('XY')
+  |> startProfileAt([5.5229, 5.25217], %)
   |> line([10.50433, -1.19122], %)
   |> line([8.01362, -5.48731], %)
   |> line([-1.02877, -6.76825], %)
@@ -197,7 +205,7 @@ async fn serial_test_execute_engine_error_return() {
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
-        r#"engine: KclErrorDetails { source_ranges: [SourceRange([193, 206])], message: "Modeling command failed: Some([ApiError { error_code: BadRequest, message: \"The path is not closed.  Solid2D construction requires a closed path!\" }])" }"#,
+        r#"engine: KclErrorDetails { source_ranges: [SourceRange([222, 235])], message: "Modeling command failed: Some([ApiError { error_code: BadRequest, message: \"The path is not closed.  Solid2D construction requires a closed path!\" }])" }"#,
     );
 }
 
@@ -221,7 +229,8 @@ async fn serial_test_execute_kittycad_svg() {
 #[tokio::test(flavor = "multi_thread")]
 async fn test_member_expression_sketch_group() {
     let code = r#"fn cube = (pos, scale) => {
-  const sg = startSketchAt(pos)
+  const sg = startSketchOn('XY')
+    |> startProfileAt(pos, %)
     |> line([0, scale], %)
     |> line([scale, 0], %)
     |> line([0, -scale], %)
@@ -252,7 +261,8 @@ async fn test_close_arc() {
 const radius = 40
 const height = 3
 
-const body = startSketchAt([center[0]+radius, center[1]])
+const body = startSketchOn('XY')
+      |> startProfileAt([center[0]+radius, center[1]], %)
       |> arc({angle_end: 360, angle_start: 0, radius: radius}, %)
       |> close(%)
       |> extrude(height, %)
@@ -270,7 +280,8 @@ const height = 10
 const length = 12
 
 fn box = (sk1, sk2, scale) => {
-  const boxSketch = startSketchAt([sk1, sk2])
+  const boxSketch = startSketchOn('XY')
+    |> startProfileAt([sk1, sk2], %)
     |> line([0, scale], %)
     |> line([scale, 0], %)
     |> line([0, -scale], %)
@@ -326,3 +337,89 @@ async fn test_basic_tangental_arc_to() {
     let result = execute_and_snapshot(code).await.unwrap();
     twenty_twenty::assert_image("tests/executor/outputs/tangental_arc_to.png", &result, 1.0);
 }
+
+#[tokio::test(flavor = "multi_thread")]
+async fn test_different_planes_same_drawing() {
+    let code = r#"const width = 5
+const height = 10
+const length = 12
+
+fn box = (sk1, sk2, scale, plane) => {
+  const boxsketch = startSketchOn(plane)
+    |> startProfileAt([sk1, sk2], %)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+    |> close(%)
+    |> extrude(scale, %)
+  return boxsketch
+}
+
+box(0, 0, 5, 'xy')
+box(10, 23, 8, 'xz')
+box(30, 43, 18, '-xy')
+let thing = box(-12, -15, 10, 'yz')
+box(-20, -5, 10, 'xy')"#;
+
+    let result = execute_and_snapshot(code).await.unwrap();
+    twenty_twenty::assert_image("tests/executor/outputs/different_planes_same_drawing.png", &result, 1.0);
+}
+
+#[tokio::test(flavor = "multi_thread")]
+async fn test_lots_of_planes() {
+    let code = r#"const sigmaAllow = 15000 // psi
+const width = 11 // inch
+const p = 150 // Force on shelf - lbs
+const distance = 12 // inches
+const FOS = 2
+const thickness = sqrt(distance * p * FOS * 6 / (sigmaAllow * width))
+const filletR = thickness * 2
+const shelfMountL = 9
+const wallMountL = 8
+
+const bracket = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line([0, wallMountL], %)
+  |> tangentalArc({ radius: filletR, offset: 90 }, %)
+  |> line([-shelfMountL, 0], %)
+  |> line([0, -thickness], %)
+  |> line([shelfMountL, 0], %)
+  |> tangentalArc({
+       radius: filletR - thickness,
+       offset: -90
+     }, %)
+  |> line([0, -wallMountL], %)
+  |> close(%)
+  |> extrude(width, %)
+
+show(bracket)
+const part001 = startSketchOn('XY')
+  |> startProfileAt([-15.53, -10.28], %)
+  |> line([10.49, -2.08], %)
+  |> line([10.42, 8.47], %)
+  |> line([-19.16, 5.1], %)
+  |> close(%)
+  |> extrude(4, %)
+
+const part002 = startSketchOn('-XZ')
+  |> startProfileAt([-9.35, 19.18], %)
+  |> line([32.14, -2.47], %)
+  |> line([8.39, -3.73], %)
+  |> close(%)
+
+const part003 = startSketchOn('-XZ')
+  |> startProfileAt([13.82, 16.51], %)
+  |> line([-6.24, -30.82], %)
+  |> line([8.39, -3.73], %)
+  |> close(%)
+
+const part004 = startSketchOn('YZ')
+  |> startProfileAt([19.04, 20.22], %)
+  |> line([9.44, -30.16], %)
+  |> line([8.39, -3.73], %)
+  |> close(%)
+"#;
+
+    let result = execute_and_snapshot(code).await.unwrap();
+    twenty_twenty::assert_image("tests/executor/outputs/lots_of_planes.png", &result, 1.0);
+}

src/wasm-lib/tests/modify/main.rs

@@ -1,14 +1,14 @@
 use anyhow::Result;
 use kcl_lib::{
     ast::{modify::modify_ast_for_sketch, types::Program},
-    engine::{EngineConnection, EngineManager},
-    executor::{MemoryItem, SourceRange},
+    engine::EngineManager,
+    executor::{ExecutorContext, MemoryItem, PlaneType, SourceRange},
 };
 use kittycad::types::{ModelingCmd, Point3D};
 use pretty_assertions::assert_eq;
 
 /// Setup the engine and parse code for an ast.
-async fn setup(code: &str, name: &str) -> Result<(EngineConnection, Program, uuid::Uuid)> {
+async fn setup(code: &str, name: &str) -> Result<(ExecutorContext, Program, uuid::Uuid)> {
     let user_agent = concat!(env!("CARGO_PKG_NAME"), ".rs/", env!("CARGO_PKG_VERSION"),);
     let http_client = reqwest::Client::builder()
         .user_agent(user_agent)
@@ -38,8 +38,9 @@ async fn setup(code: &str, name: &str) -> Result<(EngineConnection, Program, uui
     let program = parser.ast()?;
     let mut mem: kcl_lib::executor::ProgramMemory = Default::default();
     let engine = kcl_lib::engine::EngineConnection::new(ws).await?;
-    let memory =
-        kcl_lib::executor::execute(program.clone(), &mut mem, kcl_lib::executor::BodyType::Root, &engine).await?;
+    let planes = kcl_lib::executor::DefaultPlanes::new(&engine).await?;
+    let ctx = ExecutorContext { engine, planes };
+    let memory = kcl_lib::executor::execute(program.clone(), &mut mem, kcl_lib::executor::BodyType::Root, &ctx).await?;
 
     // We need to get the sketch ID.
     // Get the sketch group ID from memory.
@@ -49,7 +50,7 @@ async fn setup(code: &str, name: &str) -> Result<(EngineConnection, Program, uui
     let sketch_id = sketch_group.id;
 
     let plane_id = uuid::Uuid::new_v4();
-    engine
+    ctx.engine
         .send_modeling_cmd(
             plane_id,
             SourceRange::default(),
@@ -59,6 +60,7 @@ async fn setup(code: &str, name: &str) -> Result<(EngineConnection, Program, uui
                 size: 60.0,
                 x_axis: Point3D { x: 1.0, y: 0.0, z: 0.0 },
                 y_axis: Point3D { x: 0.0, y: 1.0, z: 0.0 },
+                hide: Some(true),
             },
         )
         .await?;
@@ -66,7 +68,7 @@ async fn setup(code: &str, name: &str) -> Result<(EngineConnection, Program, uui
     // Enter sketch mode.
     // We can't get control points without being in sketch mode.
     // You can however get path info without sketch mode.
-    engine
+    ctx.engine
         .send_modeling_cmd(
             uuid::Uuid::new_v4(),
             SourceRange::default(),
@@ -74,13 +76,14 @@ async fn setup(code: &str, name: &str) -> Result<(EngineConnection, Program, uui
                 animated: false,
                 ortho: true,
                 plane_id,
+                disable_camera_with_plane: Some(Point3D { x: 0.0, y: 0.0, z: 1.0 }),
             },
         )
         .await?;
 
     // Enter edit mode.
     // We can't get control points of an existing sketch without being in edit mode.
-    engine
+    ctx.engine
         .send_modeling_cmd(
             uuid::Uuid::new_v4(),
             SourceRange::default(),
@@ -88,14 +91,15 @@ async fn setup(code: &str, name: &str) -> Result<(EngineConnection, Program, uui
         )
         .await?;
 
-    Ok((engine, program, sketch_id))
+    Ok((ctx, program, sketch_id))
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn serial_test_modify_sketch_part001() {
     let name = "part001";
     let code = format!(
-        r#"const {} = startSketchAt([8.41, 5.78])
+        r#"const {} = startSketchOn("XY")
+  |> startProfileAt([8.41, 5.78], %)
   |> line([7.37, -11.0], %)
   |> line([-8.69, -3.75], %)
   |> line([-5.0, 4.25], %)
@@ -103,9 +107,9 @@ async fn serial_test_modify_sketch_part001() {
         name
     );
 
-    let (mut engine, program, sketch_id) = setup(&code, name).await.unwrap();
+    let (mut ctx, program, sketch_id) = setup(&code, name).await.unwrap();
     let mut new_program = program.clone();
-    let new_code = modify_ast_for_sketch(&mut engine, &mut new_program, name, sketch_id)
+    let new_code = modify_ast_for_sketch(&mut ctx.engine, &mut new_program, name, PlaneType::XY, sketch_id)
         .await
         .unwrap();
 
@@ -119,7 +123,8 @@ async fn serial_test_modify_sketch_part001() {
 async fn serial_test_modify_sketch_part002() {
     let name = "part002";
     let code = format!(
-        r#"const {} = startSketchAt([8.41, 5.78])
+        r#"const {} = startSketchOn("XY")
+  |> startProfileAt([8.41, 5.78], %)
   |> line([7.42, -8.62], %)
   |> line([-6.38, -3.51], %)
   |> line([-3.77, 3.56], %)
@@ -127,9 +132,9 @@ async fn serial_test_modify_sketch_part002() {
         name
     );
 
-    let (mut engine, program, sketch_id) = setup(&code, name).await.unwrap();
+    let (mut ctx, program, sketch_id) = setup(&code, name).await.unwrap();
     let mut new_program = program.clone();
-    let new_code = modify_ast_for_sketch(&mut engine, &mut new_program, name, sketch_id)
+    let new_code = modify_ast_for_sketch(&mut ctx.engine, &mut new_program, name, PlaneType::XY, sketch_id)
         .await
         .unwrap();
 
@@ -144,7 +149,8 @@ async fn serial_test_modify_sketch_part002() {
 async fn serial_test_modify_close_sketch() {
     let name = "part002";
     let code = format!(
-        r#"const {} = startSketchAt([7.91, 3.89])
+        r#"const {} = startSketchOn("XY")
+  |> startProfileAt([7.91, 3.89], %)
   |> line([7.42, -8.62], %)
   |> line([-6.38, -3.51], %)
   |> line([-3.77, 3.56], %)
@@ -153,9 +159,9 @@ async fn serial_test_modify_close_sketch() {
         name
     );
 
-    let (mut engine, program, sketch_id) = setup(&code, name).await.unwrap();
+    let (mut ctx, program, sketch_id) = setup(&code, name).await.unwrap();
     let mut new_program = program.clone();
-    let new_code = modify_ast_for_sketch(&mut engine, &mut new_program, name, sketch_id)
+    let new_code = modify_ast_for_sketch(&mut ctx.engine, &mut new_program, name, PlaneType::XY, sketch_id)
         .await
         .unwrap();
 
@@ -169,7 +175,8 @@ async fn serial_test_modify_close_sketch() {
 async fn serial_test_modify_line_to_close_sketch() {
     let name = "part002";
     let code = format!(
-        r#"const {} = startSketchAt([7.91, 3.89])
+        r#"const {} = startSketchOn("XY")
+  |> startProfileAt([7.91, 3.89], %)
   |> line([7.42, -8.62], %)
   |> line([-6.38, -3.51], %)
   |> line([-3.77, 3.56], %)
@@ -178,9 +185,9 @@ async fn serial_test_modify_line_to_close_sketch() {
         name
     );
 
-    let (mut engine, program, sketch_id) = setup(&code, name).await.unwrap();
+    let (mut ctx, program, sketch_id) = setup(&code, name).await.unwrap();
     let mut new_program = program.clone();
-    let new_code = modify_ast_for_sketch(&mut engine, &mut new_program, name, sketch_id)
+    let new_code = modify_ast_for_sketch(&mut ctx.engine, &mut new_program, name, PlaneType::XY, sketch_id)
         .await
         .unwrap();
 
@@ -188,7 +195,8 @@ async fn serial_test_modify_line_to_close_sketch() {
     assert_eq!(
         new_code,
         format!(
-            r#"const {} = startSketchAt([7.91, 3.89])
+            r#"const {} = startSketchOn("XY")
+  |> startProfileAt([7.91, 3.89], %)
   |> line([7.42, -8.62], %)
   |> line([-6.38, -3.51], %)
   |> line([-3.77, 3.56], %)
@@ -204,7 +212,8 @@ async fn serial_test_modify_with_constraint() {
     let name = "part002";
     let code = format!(
         r#"const thing = 12
-const {} = startSketchAt([7.91, 3.89])
+const {} = startSketchOn("XY")
+  |> startProfileAt([7.91, 3.89], %)
   |> line([7.42, -8.62], %)
   |> line([-6.38, -3.51], %)
   |> line([-3.77, 3.56], %)
@@ -213,14 +222,14 @@ const {} = startSketchAt([7.91, 3.89])
         name
     );
 
-    let (mut engine, program, sketch_id) = setup(&code, name).await.unwrap();
+    let (mut ctx, program, sketch_id) = setup(&code, name).await.unwrap();
     let mut new_program = program.clone();
-    let result = modify_ast_for_sketch(&mut engine, &mut new_program, name, sketch_id).await;
+    let result = modify_ast_for_sketch(&mut ctx.engine, &mut new_program, name, PlaneType::XY, sketch_id).await;
 
     assert!(result.is_err());
     assert_eq!(
         result.unwrap_err().to_string(),
-        r#"engine: KclErrorDetails { source_ranges: [SourceRange([159, 164])], message: "Sketch part002 is constrained `partial` and cannot be modified" }"#
+        r#"engine: KclErrorDetails { source_ranges: [SourceRange([188, 193])], message: "Sketch part002 is constrained `partial` and cannot be modified" }"#
     );
 }
 
@@ -228,7 +237,8 @@ const {} = startSketchAt([7.91, 3.89])
 async fn serial_test_modify_line_should_close_sketch() {
     let name = "part003";
     let code = format!(
-        r#"const {} = startSketchAt([13.69, 3.8])
+        r#"const {} = startSketchOn("XY")
+  |> startProfileAt([13.69, 3.8], %)
   |> line([4.23, -11.79], %)
   |> line([-10.7, -1.16], %)
   |> line([-3.72, 8.69], %)
@@ -237,9 +247,9 @@ async fn serial_test_modify_line_should_close_sketch() {
         name
     );
 
-    let (mut engine, program, sketch_id) = setup(&code, name).await.unwrap();
+    let (mut ctx, program, sketch_id) = setup(&code, name).await.unwrap();
     let mut new_program = program.clone();
-    let new_code = modify_ast_for_sketch(&mut engine, &mut new_program, name, sketch_id)
+    let new_code = modify_ast_for_sketch(&mut ctx.engine, &mut new_program, name, PlaneType::XY, sketch_id)
         .await
         .unwrap();
 
@@ -247,7 +257,8 @@ async fn serial_test_modify_line_should_close_sketch() {
     assert_eq!(
         new_code,
         format!(
-            r#"const {} = startSketchAt([13.69, 3.8])
+            r#"const {} = startSketchOn("XY")
+  |> startProfileAt([13.69, 3.8], %)
   |> line([4.23, -11.79], %)
   |> line([-10.7, -1.16], %)
   |> line([-3.72, 8.69], %)

tsconfig.json

@@ -1,6 +1,9 @@
 {
   "compilerOptions": {
     "baseUrl": "src",
+    "paths": {
+      "/*": ["src/*"]
+    },
     "types": ["vite/client", "@types/wicg-file-system-access"],
     "target": "esnext",
     "lib": [

yarn.lock

@@ -1530,10 +1530,10 @@
   resolved "https://registry.yarnpkg.com/@juggle/resize-observer/-/resize-observer-3.4.0.tgz#08d6c5e20cf7e4cc02fd181c4b0c225cd31dbb60"
   integrity sha512-dfLbk+PwWvFzSxwk3n5ySL0hfBog779o8h68wK/7/APo/7cgyWp5jcXockbxdk5kFRkbeXWm4Fbi9FrdN381sA==
 
-"@kittycad/lib@^0.0.40":
-  version "0.0.40"
-  resolved "https://registry.yarnpkg.com/@kittycad/lib/-/lib-0.0.40.tgz#0ba00c642e76648fb7cb1337e799b9d24724312d"
-  integrity sha512-R8sQKLWe3lQC7l7cyY49oFgeiMvRh8+bCaaoLiIVYT+YiE9TaS+uwwF1+sR7MiX6YZp/YCBBPFGj4Ci0VHC9Bg==
+"@kittycad/lib@^0.0.43":
+  version "0.0.43"
+  resolved "https://registry.yarnpkg.com/@kittycad/lib/-/lib-0.0.43.tgz#b93c0961200cf327f5ac6491be1ca01f9edc321c"
+  integrity sha512-Pe/PQfZ8BWEDOm4dkY4tcPcuCSh2mQPe/W8RvJ6PQNTlB7bmjAj0234pVyG+8zrKKsJC9nq4ye7CZoaXEfUSTg==
   dependencies:
     node-fetch "3.3.2"
     openapi-types "^12.0.0"
@@ -4814,10 +4814,10 @@ queue-microtask@^1.2.2:
   resolved "https://registry.yarnpkg.com/queue-microtask/-/queue-microtask-1.2.3.tgz#4929228bbc724dfac43e0efb058caf7b6cfb6243"
   integrity sha512-NuaNSa6flKT5JaSYQzJok04JzTL1CA6aGhv5rfLW3PgqA+M2ChpZQnAC8h8i4ZFkBS8X5RqkDBHA7r4hej3K9A==
 
-re-resizable@^6.9.9:
-  version "6.9.9"
-  resolved "https://registry.yarnpkg.com/re-resizable/-/re-resizable-6.9.9.tgz#99e8b31c67a62115dc9c5394b7e55892265be216"
-  integrity sha512-l+MBlKZffv/SicxDySKEEh42hR6m5bAHfNu3Tvxks2c4Ah+ldnWjfnVRwxo/nxF27SsUsxDS0raAzFuJNKABXA==
+re-resizable@^6.9.11:
+  version "6.9.11"
+  resolved "https://registry.yarnpkg.com/re-resizable/-/re-resizable-6.9.11.tgz#f356e27877f12d926d076ab9ad9ff0b95912b475"
+  integrity sha512-a3hiLWck/NkmyLvGWUuvkAmN1VhwAz4yOhS6FdMTaxCUVN9joIWkT11wsO68coG/iEYuwn+p/7qAmfQzRhiPLQ==
 
 react-base16-styling@^0.6.0:
   version "0.6.0"