35 lines
1.4 KiB
Plaintext
35 lines
1.4 KiB
Plaintext
// Bench
|
|
// This is a slight remix of Depep1's original 3D Boaty (https://www.printables.com/model/1141963-3d-boaty). This is a tool used for benchmarking 3D FDM printers for bed adhesion, overhangs, bridging and top surface quality. The name of this file is a bit of misnomer, the shape of the object is a typical park bench.
|
|
|
|
// Set units in millimeters (mm)
|
|
@settings(defaultLengthUnit = mm, kclVersion = 1.0)
|
|
|
|
// Define the bench length
|
|
benchLength = 56
|
|
|
|
// Import various constants and functions from our library
|
|
import dividerThickness from "bench-parts.kcl"
|
|
import divider from "bench-parts.kcl"
|
|
import connector from "bench-parts.kcl"
|
|
import seatSlats from "bench-parts.kcl"
|
|
import backSlats from "bench-parts.kcl"
|
|
import armRest from "bench-parts.kcl"
|
|
|
|
// Create the dividers, these hold the seat and back slats
|
|
divider(YZ)
|
|
divider(offsetPlane(YZ, offset = benchLength / 2))
|
|
divider(offsetPlane(YZ, offset = -benchLength / 2))
|
|
|
|
// Create the connectors to join the dividers
|
|
connector(offsetPlane(YZ, offset = -benchLength / 2), length = benchLength)
|
|
|
|
// Create the seat slats
|
|
seatSlats(offsetPlane(YZ, offset = -benchLength / 2 - (dividerThickness / 2)), length = benchLength + dividerThickness)
|
|
|
|
// Create the back slats
|
|
backSlats(offsetPlane(YZ, offset = -benchLength / 2 - (dividerThickness / 2)), length = benchLength + dividerThickness)
|
|
|
|
// Create the arm rests
|
|
armRest(YZ, offset = benchLength / 2)
|
|
armRest(YZ, offset = -benchLength / 2)
|