modeling-app/docs/kcl/startSketchOn.md

title, excerpt, layout

title	excerpt	layout
startSketchOn	Start a new 2-dimensional sketch on a specific plane or face.	manual

Start a new 2-dimensional sketch on a specific plane or face.

Sketch on Face Behavior

There are some important behaviors to understand when sketching on a face:

The resulting sketch will include the face and thus Solid that was sketched on. So say you were to export the resulting Sketch / Solid from a sketch on a face, you would get both the artifact of the sketch on the face and the parent face / Solid itself.

This is important to understand because if you were to then sketch on the resulting Solid, it would again include the face and parent Solid that was sketched on. This could go on indefinitely.

The point is if you want to export the result of a sketch on a face, you only need to export the final Solid that was created from the sketch on the face, since it will include all the parent faces and Solids.

startSketchOn(
  data: SketchData,
  tag?: FaceTag,
): SketchSurface

Arguments

Name	Type	Description	Required
data	SketchData	Data for start sketch on. You can start a sketch on a plane or an solid.	Yes
tag	FaceTag	A tag for a face.	No

Returns

SketchSurface - A sketch type.

Examples

exampleSketch = startSketchOn(XY)
  |> startProfileAt([0, 0], %)
  |> line(end = [10, 0])
  |> line(end = [0, 10])
  |> line(end = [-10, 0])
  |> close()

example = extrude(exampleSketch, length = 5)

exampleSketch002 = startSketchOn(example, 'end')
  |> startProfileAt([1, 1], %)
  |> line(end = [8, 0])
  |> line(end = [0, 8])
  |> line(end = [-8, 0])
  |> close()

example002 = extrude(exampleSketch002, length = 5)

exampleSketch003 = startSketchOn(example002, 'end')
  |> startProfileAt([2, 2], %)
  |> line(end = [6, 0])
  |> line(end = [0, 6])
  |> line(end = [-6, 0])
  |> close()

example003 = extrude(exampleSketch003, length = 5)

// Sketch on the end of an extruded face by tagging the end face.


exampleSketch = startSketchOn(XY)
  |> startProfileAt([0, 0], %)
  |> line(end = [10, 0])
  |> line(end = [0, 10])
  |> line(end = [-10, 0])
  |> close()

example = extrude(exampleSketch, length = 5, tagEnd = $end01)

exampleSketch002 = startSketchOn(example, end01)
  |> startProfileAt([1, 1], %)
  |> line(end = [8, 0])
  |> line(end = [0, 8])
  |> line(end = [-8, 0])
  |> close()

example002 = extrude(exampleSketch002, length = 5, tagEnd = $end02)

exampleSketch003 = startSketchOn(example002, end02)
  |> startProfileAt([2, 2], %)
  |> line(end = [6, 0])
  |> line(end = [0, 6])
  |> line(end = [-6, 0])
  |> close()

example003 = extrude(exampleSketch003, length = 5)

exampleSketch = startSketchOn(XY)
  |> startProfileAt([0, 0], %)
  |> line(end = [10, 0])
  |> line(end = [0, 10], tag = $sketchingFace)
  |> line(end = [-10, 0])
  |> close()

example = extrude(exampleSketch, length = 10)

exampleSketch002 = startSketchOn(example, sketchingFace)
  |> startProfileAt([1, 1], %)
  |> line(end = [8, 0])
  |> line(end = [0, 8])
  |> line(end = [-8, 0])
  |> close(tag = $sketchingFace002)

example002 = extrude(exampleSketch002, length = 10)

exampleSketch003 = startSketchOn(example002, sketchingFace002)
  |> startProfileAt([-8, 12], %)
  |> line(end = [0, 6])
  |> line(end = [6, 0])
  |> line(end = [0, -6])
  |> close()

example003 = extrude(exampleSketch003, length = 5)

exampleSketch = startSketchOn(XY)
  |> startProfileAt([4, 12], %)
  |> line(end = [2, 0])
  |> line(end = [0, -6])
  |> line(end = [4, -6])
  |> line(end = [0, -6])
  |> line(end = [-3.75, -4.5])
  |> line(end = [0, -5.5])
  |> line(end = [-2, 0])
  |> close()

example = revolve(exampleSketch, axis = 'y', angle = 180)

exampleSketch002 = startSketchOn(example, 'end')
  |> startProfileAt([4.5, -5], %)
  |> line(end = [0, 5])
  |> line(end = [5, 0])
  |> line(end = [0, -5])
  |> close()

example002 = extrude(exampleSketch002, length = 5)

// Sketch on the end of a revolved face by tagging the end face.


exampleSketch = startSketchOn(XY)
  |> startProfileAt([4, 12], %)
  |> line(end = [2, 0])
  |> line(end = [0, -6])
  |> line(end = [4, -6])
  |> line(end = [0, -6])
  |> line(end = [-3.75, -4.5])
  |> line(end = [0, -5.5])
  |> line(end = [-2, 0])
  |> close()

example = revolve(
  exampleSketch,
  axis = 'y',
  angle = 180,
  tagEnd = $end01,
)

exampleSketch002 = startSketchOn(example, end01)
  |> startProfileAt([4.5, -5], %)
  |> line(end = [0, 5])
  |> line(end = [5, 0])
  |> line(end = [0, -5])
  |> close()

example002 = extrude(exampleSketch002, length = 5)

a1 = startSketchOn({
       plane = {
         origin = { x = 0, y = 0, z = 0 },
         xAxis = { x = 1, y = 0, z = 0 },
         yAxis = { x = 0, y = 1, z = 0 },
         zAxis = { x = 0, y = 0, z = 1 }
       }
     })
  |> startProfileAt([0, 0], %)
  |> line(end = [100.0, 0])
  |> yLine(length = -100.0)
  |> xLine(length = -100.0)
  |> yLine(length = 100.0)
  |> close()
  |> extrude(length = 3.14)