Bump chrono from 0.4.35 to 0.4.37 in /src/wasm-lib (#1948)

Bumps [chrono](https://github.com/chronotope/chrono) from 0.4.35 to 0.4.37.
- [Release notes](https://github.com/chronotope/chrono/releases)
- [Changelog](https://github.com/chronotope/chrono/blob/main/CHANGELOG.md)
- [Commits](https://github.com/chronotope/chrono/compare/v0.4.35...v0.4.37)

---
updated-dependencies:
- dependency-name: chrono
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

.codespellrc

@@ -1,3 +1,3 @@
 [codespell]
-ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo
-skip: **/target,node_modules,build,**/Cargo.lock
+ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,absolutey
+skip: **/target,node_modules,build,**/Cargo.lock,./docs/kcl/*.md

.github/workflows/cargo-build.yml

@@ -1,50 +0,0 @@
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - '**.rs'
-      - '**/Cargo.toml'
-      - '**/Cargo.lock'
-      - '**/rust-toolchain.toml'
-      - .github/workflows/cargo-build.yml
-  pull_request:
-    paths:
-      - '**.rs'
-      - '**/Cargo.toml'
-      - '**/Cargo.lock'
-      - '**/rust-toolchain.toml'
-      - .github/workflows/cargo-build.yml
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-name: cargo build
-jobs:
-  cargobuild:
-    name: cargo build
-    runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        dir: ['src/wasm-lib']
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Install latest rust
-        uses: actions-rs/toolchain@v1
-        with:
-            toolchain: stable
-            override: true
-
-      - name: install dependencies
-        if: matrix.dir ==  'src-tauri'
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y libgtk-3-dev libwebkit2gtk-4.0-dev libappindicator3-dev librsvg2-dev patchelf
-      - name: Rust Cache
-        uses: Swatinem/rust-cache@v2.6.1
-
-      - name: Run cargo build
-        run: |
-          cd "${{ matrix.dir }}"
-          cargo build --all
-        shell: bash

.github/workflows/cargo-clippy.yml

@@ -9,12 +9,6 @@ on:
       - '**.rs'
       - .github/workflows/cargo-clippy.yml
   pull_request:
-    paths:
-      - '**/Cargo.toml'
-      - '**/Cargo.lock'
-      - '**/rust-toolchain.toml'
-      - '**.rs'
-      - .github/workflows/cargo-build.yml
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true

.github/workflows/cargo-test.yml

@@ -3,14 +3,15 @@ on:
     branches:
       - main
     paths:
-      - '**.rs'
+      - 'src/wasm-lib/**.rs'
       - '**/Cargo.toml'
       - '**/Cargo.lock'
       - '**/rust-toolchain.toml'
       - .github/workflows/cargo-test.yml
+
   pull_request:
     paths:
-      - '**.rs'
+      - 'src/wasm-lib/**.rs'
       - '**/Cargo.toml'
       - '**/Cargo.lock'
       - '**/rust-toolchain.toml'
@@ -20,7 +21,7 @@ permissions: read-all
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
-name: cargo test
+name: cargo test of wasm-lib
 jobs:
   cargotest:
     name: cargo test
@@ -62,8 +63,16 @@ jobs:
         shell: bash
         run: |-
           cd "${{ matrix.dir }}"
-          cargo nextest run --workspace --no-fail-fast -P ci 2>&1 | tee /tmp/github-actions.log
+          cargo llvm-cov nextest --all --lcov --output-path lcov.info --test-threads=1 --no-fail-fast -P ci 2>&1 | tee /tmp/github-actions.log
         env:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN}}
           RUST_MIN_STACK: 10485760000
+      - name: Upload to codecov.io
+        uses: codecov/codecov-action@v4
+        with:
+          token: ${{secrets.CODECOV_TOKEN}}
+          fail_ci_if_error: true
+          flags: wasm-lib
+          verbose: true
+          files: lcov.info
 

.github/workflows/check-exampleKcl.yml

@@ -0,0 +1,36 @@
+name: Check Onboarding KCL
+
+on:
+  pull_request:
+    types: [opened, synchronize]
+    paths:
+      - 'src/lib/exampleKcl.ts'
+
+permissions:
+  contents: read
+  issues: write
+  pull-requests: write
+
+jobs:
+  comment:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      - name: Comment on PR
+        uses: actions/github-script@v7
+        with:
+          script: |
+            const message = '`src/lib/exampleKcl.ts` has been updated in this PR, please review and update the `src/routes/onboarding`, if needed.';
+            const issue_number = context.payload.pull_request.number;
+            const owner = context.repo.owner;
+            const repo = context.repo.repo;
+
+            // Post a comment on the PR
+            await github.rest.issues.createComment({
+              owner,
+              repo,
+              issue_number,
+              body: message,
+            });

.github/workflows/ci.yml

@@ -367,7 +367,7 @@ jobs:
 
       - name: Upload release files to Github
         if: ${{ github.event_name == 'release' }}
-        uses: softprops/action-gh-release@v1
+        uses: softprops/action-gh-release@v2
         with:
           files: 'artifact/*/Zoo*'
           
@@ -394,4 +394,4 @@ jobs:
           DISCORD_WEBHOOK_URL: ${{ secrets.DISCORD_WEBHOOK_URL }}
           RELEASE_VERSION: ${{ github.event.release.tag_name }}
           RELEASE_BODY: ${{ github.event.release.body}}
-        run: python public/announce_release.py
+        run: python public/announce_release.py

.github/workflows/generate-website-docs.yml

@@ -0,0 +1,62 @@
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - .github/workflows/generate-website-docs.yml
+      - 'docs/**'
+  pull_request:
+    paths:
+      - .github/workflows/generate-website-docs.yml
+  workflow_dispatch:
+name: generate-website-docs
+concurrency:
+  group: docs-${{ github.ref }}
+  cancel-in-progress: true
+jobs:
+  generate-website-docs:
+    name: generate-website-docs 
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/create-github-app-token@v1
+        id: app-token
+        with:
+          # required
+          app-id: ${{ secrets.GH_ORG_APP_ID }}
+          private-key: ${{ secrets.GH_ORG_APP_PRIVATE_KEY }}
+          owner: ${{ github.repository_owner }}
+      # Checkout the docs repo since we will want to update the files there.
+      - uses: actions/checkout@v4
+        with:
+          repository: 'kittycad/documentation'
+          path: 'documentation'
+          token: ${{ steps.app-token.outputs.token }}
+      - name: move docs to docs
+        shell: bash
+        run: |
+          mkdir -p documentation/content/pages/docs/kcl/
+          # cleanup old
+          rm -rf documentation/content/pages/docs/kcl/*.md
+          # move new
+          mv -f docs/kcl/*.md documentation/content/pages/docs/kcl/
+      - name: commit the changes in the docs repo
+        shell: bash
+        run: |
+          cd documentation
+          git config --local user.email "github-actions[bot]@users.noreply.github.com"
+          git config --local user.name "github-actions[bot]"
+          git add .
+          git commit -am "YOYO NEW KCL DOCS!!" || exit 0
+          git fetch origin
+          git rebase origin/main || exit 0
+          export NEW_BRANCH="update-kcl-docs"
+          git checkout -b "$NEW_BRANCH"
+          git push -f origin "$NEW_BRANCH"
+          gh pr create --title "Update KCL docs" \
+              --body "Updating the generated kcl docs cc @jessfraz @franknoirot merge this" \
+              --head "$NEW_BRANCH" \
+              --base main || true
+        env:
+          GITHUB_TOKEN: ${{ steps.app-token.outputs.token }}
+

.github/workflows/playwright.yml

@@ -9,17 +9,21 @@ concurrency:
   group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
   cancel-in-progress: true
 
+permissions:
+  contents: write
+  pull-requests: write
+
 jobs:
   playwright-ubuntu:
     timeout-minutes: 60
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-latest-8-cores
     steps:
     - uses: actions/checkout@v4
     - uses: actions/setup-node@v4
       with:
         node-version-file: '.nvmrc'
         cache: 'yarn'
-    - uses: KittyCAD/action-install-cli@v0.2.21
+    - uses: KittyCAD/action-install-cli@main
     - name: Install dependencies
       run: yarn
     - name: Install Playwright Browsers
@@ -85,7 +89,6 @@ jobs:
   playwright-macos:
     timeout-minutes: 60
     runs-on: macos-14
-    needs: playwright-ubuntu
     steps:
     - uses: actions/checkout@v4
     - uses: actions/setup-node@v4

.gitignore

@@ -33,17 +33,14 @@ src/wasm-lib/bindings
 src/wasm-lib/kcl/bindings
 public/wasm_lib_bg.wasm
 src/wasm-lib/lcov.info
+src/wasm-lib/grackle/test_json_output
 
 e2e/playwright/playwright-secrets.env
 e2e/playwright/temp1.png
 e2e/playwright/temp2.png
-# exports from snapshot-tests.spec.ts
-e2e/playwright/export-snapshots/*.ply
-e2e/playwright/export-snapshots/*.obj
-e2e/playwright/export-snapshots/*.step
-e2e/playwright/export-snapshots/*.stl
-e2e/playwright/export-snapshots/*binary.gltf
-e2e/playwright/export-snapshots/*embedded.gltf
+# exports from snapshot-tests.spec.ts "exports of each format should work"
+e2e/playwright/export-snapshots/*
+!e2e/playwright/export-snapshots/*.png
 
 
 /test-results/

README.md

@@ -141,7 +141,7 @@ run `./make-release.sh` for a patch update
 run `./make-release.sh "minor"` for minor
 run `./make-release.sh "major"` for major
 
-The PR may serve as a place to discuss the human-readable changelog and extra QA. A quick way of getting PR's merged since the last bump is to [use this PR filter](https://github.com/KittyCAD/modeling-app/pulls?q=is%3Apr+sort%3Aupdated-desc+is%3Amerged+), open up the browser console and past in the following
+The PR may serve as a place to discuss the human-readable changelog and extra QA. A quick way of getting PR's merged since the last bump is to [use this PR filter](https://github.com/KittyCAD/modeling-app/pulls?q=is%3Apr+sort%3Aupdated-desc+is%3Amerged+), open up the browser console and paste in the following
 
 ```typescript
 console.log(

docs/kcl/KNOWN-ISSUES.md

@@ -1,4 +1,8 @@
-# Known Issues
+---
+title: "KCL Known Issues"
+excerpt: "Known issues with the KCL standard library for the Zoo Modeling App."
+layout: manual
+---
 
 The following are bugs that are not in modeling-app or kcl itself. These bugs
 once fixed in engine will just start working here with no language changes.
@@ -12,3 +16,5 @@ once fixed in engine will just start working here with no language changes.
     you cannot edit it, after v1, the engine will account for this. You also cannot
     currently move or transform the imported objects at all, once we have assemblies
     this will work.
+
+- **Fillets**: Fillets cannot intersect, you will get an error. Only simple fillet cases work currently.

docs/kcl/abs.md

@@ -0,0 +1,34 @@
+---
+title: "abs"
+excerpt: "Computes the absolute value of a number."
+layout: manual
+---
+
+Computes the absolute value of a number.
+
+
+
+```js
+abs(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = abs(-4)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/acos.md

@@ -0,0 +1,34 @@
+---
+title: "acos"
+excerpt: "Computes the arccosine of a number (in radians)."
+layout: manual
+---
+
+Computes the arccosine of a number (in radians).
+
+
+
+```js
+acos(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = acos(0.5)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/asin.md

@@ -0,0 +1,34 @@
+---
+title: "asin"
+excerpt: "Computes the arcsine of a number (in radians)."
+layout: manual
+---
+
+Computes the arcsine of a number (in radians).
+
+
+
+```js
+asin(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = asin(0.5)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/atan.md

@@ -0,0 +1,34 @@
+---
+title: "atan"
+excerpt: "Computes the arctangent of a number (in radians)."
+layout: manual
+---
+
+Computes the arctangent of a number (in radians).
+
+
+
+```js
+atan(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = atan(1.0)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/ceil.md

@@ -0,0 +1,34 @@
+---
+title: "ceil"
+excerpt: "Computes the smallest integer greater than or equal to a number."
+layout: manual
+---
+
+Computes the smallest integer greater than or equal to a number.
+
+
+
+```js
+ceil(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = ceil(4.5)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/cos.md

@@ -0,0 +1,34 @@
+---
+title: "cos"
+excerpt: "Computes the cosine of a number (in radians)."
+layout: manual
+---
+
+Computes the cosine of a number (in radians).
+
+
+
+```js
+cos(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const anotherVar = cos(2 * pi())
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/e.md

@@ -0,0 +1,33 @@
+---
+title: "e"
+excerpt: "Return the value of Euler’s number `e`."
+layout: manual
+---
+
+Return the value of Euler’s number `e`.
+
+
+
+```js
+e() -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = e()
+```
+
+### Arguments
+
+
+### Returns
+
+`number`
+
+
+

docs/kcl/floor.md

@@ -0,0 +1,34 @@
+---
+title: "floor"
+excerpt: "Computes the largest integer less than or equal to a number."
+layout: manual
+---
+
+Computes the largest integer less than or equal to a number.
+
+
+
+```js
+floor(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = floor(4.5)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/import.md

@@ -0,0 +1,136 @@
+---
+title: "import"
+excerpt: "Import a CAD file."
+layout: manual
+---
+
+Import a CAD file.
+
+For formats lacking unit data (STL, OBJ, PLY), the default import unit is millimeters. Otherwise you can specify the unit by passing in the options parameter. If you import a gltf file, we will try to find the bin file and import it as well.
+Import paths are relative to the current project directory. This only works in the desktop app not in browser.
+
+```js
+import(file_path: String, options?: ImportFormat) -> ImportedGeometry
+```
+
+### Examples
+
+```js
+const model = import("thing.obj")
+```
+
+```js
+const model = import("cube.obj", { type: "obj", units: "m" })
+```
+
+```js
+const model = import("my_model.gltf")
+```
+
+```js
+const model = import("my_model.sldprt")
+```
+
+```js
+const model = import("my_model.step")
+```
+
+### Arguments
+
+* `file_path`: `String` (REQUIRED)
+* `options`: `ImportFormat` - Import format specifier (OPTIONAL)
+```js
+{
+	type: "fbx",
+} |
+{
+	type: "gltf",
+} |
+{
+	// Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system.
+	coords: {
+	// Axis the front face of a model looks along.
+	forward: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+	// Axis pointing up and away from a model.
+	up: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+},
+	type: "obj",
+	// The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters.
+	units: "cm" | "ft" | "in" | "m" | "mm" | "yd",
+} |
+{
+	// Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system.
+	coords: {
+	// Axis the front face of a model looks along.
+	forward: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+	// Axis pointing up and away from a model.
+	up: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+},
+	type: "ply",
+	// The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters.
+	units: "cm" | "ft" | "in" | "m" | "mm" | "yd",
+} |
+{
+	type: "sldprt",
+} |
+{
+	type: "step",
+} |
+{
+	// Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system.
+	coords: {
+	// Axis the front face of a model looks along.
+	forward: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+	// Axis pointing up and away from a model.
+	up: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+},
+	type: "stl",
+	// The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters.
+	units: "cm" | "ft" | "in" | "m" | "mm" | "yd",
+}
+```
+
+### Returns
+
+`ImportedGeometry` - Data for an imported geometry.
+```js
+{
+	// The ID of the imported geometry.
+	id: uuid,
+	// The original file paths.
+	value: [string],
+}
+```
+
+
+

docs/kcl/index.md

@@ -0,0 +1,79 @@
+---
+title: "KCL Standard Library"
+excerpt: "Documentation for the KCL standard library for the Zoo Modeling App."
+layout: manual
+---
+
+## Table of Contents
+
+* [Types](kcl/types)
+* [Known Issues](kcl/KNOWN-ISSUES)
+* [`abs`](kcl/abs)
+* [`acos`](kcl/acos)
+* [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
+* [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
+* [`angledLine`](kcl/angledLine)
+* [`angledLineOfXLength`](kcl/angledLineOfXLength)
+* [`angledLineOfYLength`](kcl/angledLineOfYLength)
+* [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
+* [`angledLineToX`](kcl/angledLineToX)
+* [`angledLineToY`](kcl/angledLineToY)
+* [`arc`](kcl/arc)
+* [`asin`](kcl/asin)
+* [`atan`](kcl/atan)
+* [`bezierCurve`](kcl/bezierCurve)
+* [`ceil`](kcl/ceil)
+* [`circle`](kcl/circle)
+* [`close`](kcl/close)
+* [`cos`](kcl/cos)
+* [`e`](kcl/e)
+* [`extrude`](kcl/extrude)
+* [`fillet`](kcl/fillet)
+* [`floor`](kcl/floor)
+* [`getEdge`](kcl/getEdge)
+* [`getExtrudeWallTransform`](kcl/getExtrudeWallTransform)
+* [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
+* [`getOppositeEdge`](kcl/getOppositeEdge)
+* [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
+* [`helix`](kcl/helix)
+* [`hole`](kcl/hole)
+* [`import`](kcl/import)
+* [`lastSegX`](kcl/lastSegX)
+* [`lastSegY`](kcl/lastSegY)
+* [`legAngX`](kcl/legAngX)
+* [`legAngY`](kcl/legAngY)
+* [`legLen`](kcl/legLen)
+* [`line`](kcl/line)
+* [`lineTo`](kcl/lineTo)
+* [`ln`](kcl/ln)
+* [`log`](kcl/log)
+* [`log10`](kcl/log10)
+* [`log2`](kcl/log2)
+* [`max`](kcl/max)
+* [`min`](kcl/min)
+* [`patternCircular2d`](kcl/patternCircular2d)
+* [`patternCircular3d`](kcl/patternCircular3d)
+* [`patternLinear2d`](kcl/patternLinear2d)
+* [`patternLinear3d`](kcl/patternLinear3d)
+* [`pi`](kcl/pi)
+* [`pow`](kcl/pow)
+* [`revolve`](kcl/revolve)
+* [`segAng`](kcl/segAng)
+* [`segEndX`](kcl/segEndX)
+* [`segEndY`](kcl/segEndY)
+* [`segLen`](kcl/segLen)
+* [`sin`](kcl/sin)
+* [`sqrt`](kcl/sqrt)
+* [`startProfileAt`](kcl/startProfileAt)
+* [`startSketchAt`](kcl/startSketchAt)
+* [`startSketchOn`](kcl/startSketchOn)
+* [`tan`](kcl/tan)
+* [`tangentialArc`](kcl/tangentialArc)
+* [`tangentialArcTo`](kcl/tangentialArcTo)
+* [`tau`](kcl/tau)
+* [`toDegrees`](kcl/toDegrees)
+* [`toRadians`](kcl/toRadians)
+* [`xLine`](kcl/xLine)
+* [`xLineTo`](kcl/xLineTo)
+* [`yLine`](kcl/yLine)
+* [`yLineTo`](kcl/yLineTo)

docs/kcl/legAngX.md

@@ -0,0 +1,35 @@
+---
+title: "legAngX"
+excerpt: "Returns the angle of the given leg for x."
+layout: manual
+---
+
+Returns the angle of the given leg for x.
+
+
+
+```js
+legAngX(hypotenuse: number, leg: number) -> number
+```
+
+### Tags
+
+* `utilities`
+
+### Examples
+
+```js
+legAngX(5, 3)
+```
+
+### Arguments
+
+* `hypotenuse`: `number` (REQUIRED)
+* `leg`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/legAngY.md

@@ -0,0 +1,35 @@
+---
+title: "legAngY"
+excerpt: "Returns the angle of the given leg for y."
+layout: manual
+---
+
+Returns the angle of the given leg for y.
+
+
+
+```js
+legAngY(hypotenuse: number, leg: number) -> number
+```
+
+### Tags
+
+* `utilities`
+
+### Examples
+
+```js
+legAngY(5, 3)
+```
+
+### Arguments
+
+* `hypotenuse`: `number` (REQUIRED)
+* `leg`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/legLen.md

@@ -0,0 +1,35 @@
+---
+title: "legLen"
+excerpt: "Returns the length of the given leg."
+layout: manual
+---
+
+Returns the length of the given leg.
+
+
+
+```js
+legLen(hypotenuse: number, leg: number) -> number
+```
+
+### Tags
+
+* `utilities`
+
+### Examples
+
+```js
+legLen(5, 3)
+```
+
+### Arguments
+
+* `hypotenuse`: `number` (REQUIRED)
+* `leg`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/ln.md

@@ -0,0 +1,34 @@
+---
+title: "ln"
+excerpt: "Computes the natural logarithm of the number."
+layout: manual
+---
+
+Computes the natural logarithm of the number.
+
+
+
+```js
+ln(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = ln(4)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/log.md

@@ -0,0 +1,35 @@
+---
+title: "log"
+excerpt: "Computes the logarithm of the number with respect to an arbitrary base."
+layout: manual
+---
+
+Computes the logarithm of the number with respect to an arbitrary base.
+
+The result might not be correctly rounded owing to implementation details; `log2()` can produce more accurate results for base 2, and `log10()` can produce more accurate results for base 10.
+
+```js
+log(num: number, base: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = log(4, 2)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+* `base`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/log10.md

@@ -0,0 +1,34 @@
+---
+title: "log10"
+excerpt: "Computes the base 10 logarithm of the number."
+layout: manual
+---
+
+Computes the base 10 logarithm of the number.
+
+
+
+```js
+log10(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = log10(4)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/log2.md

@@ -0,0 +1,34 @@
+---
+title: "log2"
+excerpt: "Computes the base 2 logarithm of the number."
+layout: manual
+---
+
+Computes the base 2 logarithm of the number.
+
+
+
+```js
+log2(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = log2(4)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/max.md

@@ -0,0 +1,34 @@
+---
+title: "max"
+excerpt: "Computes the maximum of the given arguments."
+layout: manual
+---
+
+Computes the maximum of the given arguments.
+
+
+
+```js
+max(args: [number]) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = max(4, 5, 6)
+```
+
+### Arguments
+
+* `args`: `[number]` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/min.md

@@ -0,0 +1,34 @@
+---
+title: "min"
+excerpt: "Computes the minimum of the given arguments."
+layout: manual
+---
+
+Computes the minimum of the given arguments.
+
+
+
+```js
+min(args: [number]) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = min(4, 5, 6)
+```
+
+### Arguments
+
+* `args`: `[number]` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/pi.md

@@ -0,0 +1,33 @@
+---
+title: "pi"
+excerpt: "Return the value of `pi`. Archimedes’ constant (π)."
+layout: manual
+---
+
+Return the value of `pi`. Archimedes’ constant (π).
+
+
+
+```js
+pi() -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = pi() * 3.0
+```
+
+### Arguments
+
+
+### Returns
+
+`number`
+
+
+

docs/kcl/pow.md

@@ -0,0 +1,35 @@
+---
+title: "pow"
+excerpt: "Computes the number to a power."
+layout: manual
+---
+
+Computes the number to a power.
+
+
+
+```js
+pow(num: number, pow: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = pow(4, 2)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+* `pow`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/sin.md

@@ -0,0 +1,34 @@
+---
+title: "sin"
+excerpt: "Computes the sine of a number (in radians)."
+layout: manual
+---
+
+Computes the sine of a number (in radians).
+
+
+
+```js
+sin(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = sin(2 * pi())
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/sqrt.md

@@ -0,0 +1,34 @@
+---
+title: "sqrt"
+excerpt: "Computes the square root of a number."
+layout: manual
+---
+
+Computes the square root of a number.
+
+
+
+```js
+sqrt(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = sqrt(4)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/tan.md

@@ -0,0 +1,34 @@
+---
+title: "tan"
+excerpt: "Computes the tangent of a number (in radians)."
+layout: manual
+---
+
+Computes the tangent of a number (in radians).
+
+
+
+```js
+tan(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = tan(2 * pi())
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/tau.md

@@ -0,0 +1,33 @@
+---
+title: "tau"
+excerpt: "Return the value of `tau`. The full circle constant (τ). Equal to 2π."
+layout: manual
+---
+
+Return the value of `tau`. The full circle constant (τ). Equal to 2π.
+
+
+
+```js
+tau() -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = tau()
+```
+
+### Arguments
+
+
+### Returns
+
+`number`
+
+
+

docs/kcl/toDegrees.md

@@ -0,0 +1,34 @@
+---
+title: "toDegrees"
+excerpt: "Converts a number from radians to degrees."
+layout: manual
+---
+
+Converts a number from radians to degrees.
+
+
+
+```js
+toDegrees(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = toDegrees(2 * pi())
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/toRadians.md

@@ -0,0 +1,34 @@
+---
+title: "toRadians"
+excerpt: "Converts a number from degrees to radians."
+layout: manual
+---
+
+Converts a number from degrees to radians.
+
+
+
+```js
+toRadians(num: number) -> number
+```
+
+### Tags
+
+* `math`
+
+### Examples
+
+```js
+const myVar = toRadians(180)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/types.md

@@ -1,4 +1,8 @@
-# Types
+---
+title: "KCL Types"
+excerpt: "Documentation of types for the KCL standard library for the Zoo Modeling App."
+layout: manual
+---
 
 `KCL` defines the following types and keywords the language.
 

e2e/playwright/export-snapshots/step-.step

@@ -1,494 +0,0 @@
-ISO-10303-21;
-HEADER;
-FILE_DESCRIPTION((('zoo.dev export')), '2;1');
-FILE_NAME('dump.step', '1970-01-01T00:00:00.0+00:00', ('Author unknown'), ('Organization unknown'), 'zoo.dev beta', 'zoo.dev', 'Authorization unknown');
-FILE_SCHEMA(('AP203_CONFIGURATION_CONTROLLED_3D_DESIGN_OF_MECHANICAL_PARTS_AND_ASSEMBLIES_MIM_LF'));
-ENDSEC;
-DATA;
-#1 = (
-  LENGTH_UNIT()
-  NAMED_UNIT(*)
-  SI_UNIT($, .METRE.)
-);
-#2 = UNCERTAINTY_MEASURE_WITH_UNIT(0.00001, #1, 'DISTANCE_ACCURACY_VALUE', $);
-#3 = (
-  GEOMETRIC_REPRESENTATION_CONTEXT(3)
-  GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2))
-  GLOBAL_UNIT_ASSIGNED_CONTEXT((#1))
-  REPRESENTATION_CONTEXT('', '3D')
-);
-#4 = CARTESIAN_POINT('NONE', (0, 0, -0));
-#5 = VERTEX_POINT('NONE', #4);
-#6 = CARTESIAN_POINT('NONE', (0, -0.64516, -0));
-#7 = VERTEX_POINT('NONE', #6);
-#8 = CARTESIAN_POINT('NONE', (0, -0.64516, 2.58064));
-#9 = VERTEX_POINT('NONE', #8);
-#10 = CARTESIAN_POINT('NONE', (0, 0, 2.58064));
-#11 = VERTEX_POINT('NONE', #10);
-#12 = CARTESIAN_POINT('NONE', (1.996782122555674, -0.64516, -0));
-#13 = VERTEX_POINT('NONE', #12);
-#14 = CARTESIAN_POINT('NONE', (1.996782122555674, -0.64516, 2.58064));
-#15 = VERTEX_POINT('NONE', #14);
-#16 = CARTESIAN_POINT('NONE', (3.839550058615159, -1.9354799999999992, -0));
-#17 = VERTEX_POINT('NONE', #16);
-#18 = CARTESIAN_POINT('NONE', (3.839550058615159, -1.9354799999999992, 2.58064));
-#19 = VERTEX_POINT('NONE', #18);
-#20 = CARTESIAN_POINT('NONE', (6.12902, -1.93548, -0));
-#21 = VERTEX_POINT('NONE', #20);
-#22 = CARTESIAN_POINT('NONE', (6.12902, -1.93548, 2.58064));
-#23 = VERTEX_POINT('NONE', #22);
-#24 = CARTESIAN_POINT('NONE', (6.12902, -1.6129, -0));
-#25 = VERTEX_POINT('NONE', #24);
-#26 = CARTESIAN_POINT('NONE', (6.12902, -1.6129, 2.58064));
-#27 = VERTEX_POINT('NONE', #26);
-#28 = CARTESIAN_POINT('NONE', (3.9412591419317424, -1.6129, -0));
-#29 = VERTEX_POINT('NONE', #28);
-#30 = CARTESIAN_POINT('NONE', (3.9412591419317424, -1.6129, 2.58064));
-#31 = VERTEX_POINT('NONE', #30);
-#32 = CARTESIAN_POINT('NONE', (1.6377992218573856, 0, -0));
-#33 = VERTEX_POINT('NONE', #32);
-#34 = CARTESIAN_POINT('NONE', (1.6377992218573856, 0, 2.58064));
-#35 = VERTEX_POINT('NONE', #34);
-#36 = CARTESIAN_POINT('NONE', (3.7131243491113075, 0.9677400000000002, -0));
-#37 = VERTEX_POINT('NONE', #36);
-#38 = CARTESIAN_POINT('NONE', (3.7131243491113075, 0.9677400000000002, 2.58064));
-#39 = VERTEX_POINT('NONE', #38);
-#40 = CARTESIAN_POINT('NONE', (6.12902, 0.9677399999999998, -0));
-#41 = VERTEX_POINT('NONE', #40);
-#42 = CARTESIAN_POINT('NONE', (6.12902, 0.9677399999999998, 2.58064));
-#43 = VERTEX_POINT('NONE', #42);
-#44 = CARTESIAN_POINT('NONE', (6.12902, 1.29032, -0));
-#45 = VERTEX_POINT('NONE', #44);
-#46 = CARTESIAN_POINT('NONE', (6.12902, 1.29032, 2.58064));
-#47 = VERTEX_POINT('NONE', #46);
-#48 = CARTESIAN_POINT('NONE', (3.6416100848359463, 1.29032, -0));
-#49 = VERTEX_POINT('NONE', #48);
-#50 = CARTESIAN_POINT('NONE', (3.6416100848359463, 1.29032, 2.58064));
-#51 = VERTEX_POINT('NONE', #50);
-#52 = CARTESIAN_POINT('NONE', (2.2580599999999995, 0.64516, -0));
-#53 = VERTEX_POINT('NONE', #52);
-#54 = CARTESIAN_POINT('NONE', (2.2580599999999995, 0.64516, 2.58064));
-#55 = VERTEX_POINT('NONE', #54);
-#56 = CARTESIAN_POINT('NONE', (0, 0.64516, -0));
-#57 = VERTEX_POINT('NONE', #56);
-#58 = CARTESIAN_POINT('NONE', (0, 0.64516, 2.58064));
-#59 = VERTEX_POINT('NONE', #58);
-#60 = DIRECTION('NONE', (0, -1, 0));
-#61 = VECTOR('NONE', #60, 1);
-#62 = CARTESIAN_POINT('NONE', (0, 0, -0));
-#63 = LINE('NONE', #62, #61);
-#64 = DIRECTION('NONE', (0, 0, 1));
-#65 = VECTOR('NONE', #64, 1);
-#66 = CARTESIAN_POINT('NONE', (0, -0.64516, -0));
-#67 = LINE('NONE', #66, #65);
-#68 = DIRECTION('NONE', (0, -1, 0));
-#69 = VECTOR('NONE', #68, 1);
-#70 = CARTESIAN_POINT('NONE', (0, 0, 2.58064));
-#71 = LINE('NONE', #70, #69);
-#72 = DIRECTION('NONE', (0, 0, 1));
-#73 = VECTOR('NONE', #72, 1);
-#74 = CARTESIAN_POINT('NONE', (0, 0, -0));
-#75 = LINE('NONE', #74, #73);
-#76 = DIRECTION('NONE', (1, 0, 0));
-#77 = VECTOR('NONE', #76, 1);
-#78 = CARTESIAN_POINT('NONE', (0, -0.64516, -0));
-#79 = LINE('NONE', #78, #77);
-#80 = DIRECTION('NONE', (0, 0, 1));
-#81 = VECTOR('NONE', #80, 1);
-#82 = CARTESIAN_POINT('NONE', (1.996782122555674, -0.64516, -0));
-#83 = LINE('NONE', #82, #81);
-#84 = DIRECTION('NONE', (1, 0, 0));
-#85 = VECTOR('NONE', #84, 1);
-#86 = CARTESIAN_POINT('NONE', (0, -0.64516, 2.58064));
-#87 = LINE('NONE', #86, #85);
-#88 = DIRECTION('NONE', (0.819152044288992, -0.5735764363510459, 0));
-#89 = VECTOR('NONE', #88, 1);
-#90 = CARTESIAN_POINT('NONE', (1.996782122555674, -0.64516, -0));
-#91 = LINE('NONE', #90, #89);
-#92 = DIRECTION('NONE', (0, 0, 1));
-#93 = VECTOR('NONE', #92, 1);
-#94 = CARTESIAN_POINT('NONE', (3.839550058615159, -1.9354799999999992, -0));
-#95 = LINE('NONE', #94, #93);
-#96 = DIRECTION('NONE', (0.819152044288992, -0.5735764363510459, 0));
-#97 = VECTOR('NONE', #96, 1);
-#98 = CARTESIAN_POINT('NONE', (1.996782122555674, -0.64516, 2.58064));
-#99 = LINE('NONE', #98, #97);
-#100 = DIRECTION('NONE', (1, -0.00000000000000038794063361359933, 0));
-#101 = VECTOR('NONE', #100, 1);
-#102 = CARTESIAN_POINT('NONE', (3.839550058615159, -1.9354799999999992, -0));
-#103 = LINE('NONE', #102, #101);
-#104 = DIRECTION('NONE', (0, 0, 1));
-#105 = VECTOR('NONE', #104, 1);
-#106 = CARTESIAN_POINT('NONE', (6.12902, -1.93548, -0));
-#107 = LINE('NONE', #106, #105);
-#108 = DIRECTION('NONE', (1, -0.00000000000000038794063361359933, 0));
-#109 = VECTOR('NONE', #108, 1);
-#110 = CARTESIAN_POINT('NONE', (3.839550058615159, -1.9354799999999992, 2.58064));
-#111 = LINE('NONE', #110, #109);
-#112 = DIRECTION('NONE', (0, 1, 0));
-#113 = VECTOR('NONE', #112, 1);
-#114 = CARTESIAN_POINT('NONE', (6.12902, -1.93548, -0));
-#115 = LINE('NONE', #114, #113);
-#116 = DIRECTION('NONE', (0, 0, 1));
-#117 = VECTOR('NONE', #116, 1);
-#118 = CARTESIAN_POINT('NONE', (6.12902, -1.6129, -0));
-#119 = LINE('NONE', #118, #117);
-#120 = DIRECTION('NONE', (0, 1, 0));
-#121 = VECTOR('NONE', #120, 1);
-#122 = CARTESIAN_POINT('NONE', (6.12902, -1.93548, 2.58064));
-#123 = LINE('NONE', #122, #121);
-#124 = DIRECTION('NONE', (-1, 0, 0));
-#125 = VECTOR('NONE', #124, 1);
-#126 = CARTESIAN_POINT('NONE', (6.12902, -1.6129, -0));
-#127 = LINE('NONE', #126, #125);
-#128 = DIRECTION('NONE', (0, 0, 1));
-#129 = VECTOR('NONE', #128, 1);
-#130 = CARTESIAN_POINT('NONE', (3.9412591419317424, -1.6129, -0));
-#131 = LINE('NONE', #130, #129);
-#132 = DIRECTION('NONE', (-1, 0, 0));
-#133 = VECTOR('NONE', #132, 1);
-#134 = CARTESIAN_POINT('NONE', (6.12902, -1.6129, 2.58064));
-#135 = LINE('NONE', #134, #133);
-#136 = DIRECTION('NONE', (-0.8191520442889919, 0.573576436351046, 0));
-#137 = VECTOR('NONE', #136, 1);
-#138 = CARTESIAN_POINT('NONE', (3.9412591419317424, -1.6129, -0));
-#139 = LINE('NONE', #138, #137);
-#140 = DIRECTION('NONE', (0, 0, 1));
-#141 = VECTOR('NONE', #140, 1);
-#142 = CARTESIAN_POINT('NONE', (1.6377992218573856, 0, -0));
-#143 = LINE('NONE', #142, #141);
-#144 = DIRECTION('NONE', (-0.8191520442889919, 0.573576436351046, 0));
-#145 = VECTOR('NONE', #144, 1);
-#146 = CARTESIAN_POINT('NONE', (3.9412591419317424, -1.6129, 2.58064));
-#147 = LINE('NONE', #146, #145);
-#148 = DIRECTION('NONE', (0.90630778703665, 0.4226182617406992, 0));
-#149 = VECTOR('NONE', #148, 1);
-#150 = CARTESIAN_POINT('NONE', (1.6377992218573856, 0, -0));
-#151 = LINE('NONE', #150, #149);
-#152 = DIRECTION('NONE', (0, 0, 1));
-#153 = VECTOR('NONE', #152, 1);
-#154 = CARTESIAN_POINT('NONE', (3.7131243491113075, 0.9677400000000002, -0));
-#155 = LINE('NONE', #154, #153);
-#156 = DIRECTION('NONE', (0.90630778703665, 0.4226182617406992, 0));
-#157 = VECTOR('NONE', #156, 1);
-#158 = CARTESIAN_POINT('NONE', (1.6377992218573856, 0, 2.58064));
-#159 = LINE('NONE', #158, #157);
-#160 = DIRECTION('NONE', (1, -0.0000000000000001378647737807002, 0));
-#161 = VECTOR('NONE', #160, 1);
-#162 = CARTESIAN_POINT('NONE', (3.7131243491113075, 0.9677400000000002, -0));
-#163 = LINE('NONE', #162, #161);
-#164 = DIRECTION('NONE', (0, 0, 1));
-#165 = VECTOR('NONE', #164, 1);
-#166 = CARTESIAN_POINT('NONE', (6.12902, 0.9677399999999998, -0));
-#167 = LINE('NONE', #166, #165);
-#168 = DIRECTION('NONE', (1, -0.0000000000000001378647737807002, 0));
-#169 = VECTOR('NONE', #168, 1);
-#170 = CARTESIAN_POINT('NONE', (3.7131243491113075, 0.9677400000000002, 2.58064));
-#171 = LINE('NONE', #170, #169);
-#172 = DIRECTION('NONE', (0, 1, 0));
-#173 = VECTOR('NONE', #172, 1);
-#174 = CARTESIAN_POINT('NONE', (6.12902, 0.9677399999999998, -0));
-#175 = LINE('NONE', #174, #173);
-#176 = DIRECTION('NONE', (0, 0, 1));
-#177 = VECTOR('NONE', #176, 1);
-#178 = CARTESIAN_POINT('NONE', (6.12902, 1.29032, -0));
-#179 = LINE('NONE', #178, #177);
-#180 = DIRECTION('NONE', (0, 1, 0));
-#181 = VECTOR('NONE', #180, 1);
-#182 = CARTESIAN_POINT('NONE', (6.12902, 0.9677399999999998, 2.58064));
-#183 = LINE('NONE', #182, #181);
-#184 = DIRECTION('NONE', (-1, 0, 0));
-#185 = VECTOR('NONE', #184, 1);
-#186 = CARTESIAN_POINT('NONE', (6.12902, 1.29032, -0));
-#187 = LINE('NONE', #186, #185);
-#188 = DIRECTION('NONE', (0, 0, 1));
-#189 = VECTOR('NONE', #188, 1);
-#190 = CARTESIAN_POINT('NONE', (3.6416100848359463, 1.29032, -0));
-#191 = LINE('NONE', #190, #189);
-#192 = DIRECTION('NONE', (-1, 0, 0));
-#193 = VECTOR('NONE', #192, 1);
-#194 = CARTESIAN_POINT('NONE', (6.12902, 1.29032, 2.58064));
-#195 = LINE('NONE', #194, #193);
-#196 = DIRECTION('NONE', (-0.90630778703665, -0.4226182617406995, 0));
-#197 = VECTOR('NONE', #196, 1);
-#198 = CARTESIAN_POINT('NONE', (3.6416100848359463, 1.29032, -0));
-#199 = LINE('NONE', #198, #197);
-#200 = DIRECTION('NONE', (0, 0, 1));
-#201 = VECTOR('NONE', #200, 1);
-#202 = CARTESIAN_POINT('NONE', (2.2580599999999995, 0.64516, -0));
-#203 = LINE('NONE', #202, #201);
-#204 = DIRECTION('NONE', (-0.90630778703665, -0.4226182617406995, 0));
-#205 = VECTOR('NONE', #204, 1);
-#206 = CARTESIAN_POINT('NONE', (3.6416100848359463, 1.29032, 2.58064));
-#207 = LINE('NONE', #206, #205);
-#208 = DIRECTION('NONE', (-1, 0, 0));
-#209 = VECTOR('NONE', #208, 1);
-#210 = CARTESIAN_POINT('NONE', (2.2580599999999995, 0.64516, -0));
-#211 = LINE('NONE', #210, #209);
-#212 = DIRECTION('NONE', (0, 0, 1));
-#213 = VECTOR('NONE', #212, 1);
-#214 = CARTESIAN_POINT('NONE', (0, 0.64516, -0));
-#215 = LINE('NONE', #214, #213);
-#216 = DIRECTION('NONE', (-1, 0, 0));
-#217 = VECTOR('NONE', #216, 1);
-#218 = CARTESIAN_POINT('NONE', (2.2580599999999995, 0.64516, 2.58064));
-#219 = LINE('NONE', #218, #217);
-#220 = DIRECTION('NONE', (0, -1, 0));
-#221 = VECTOR('NONE', #220, 1);
-#222 = CARTESIAN_POINT('NONE', (0, 0.64516, -0));
-#223 = LINE('NONE', #222, #221);
-#224 = DIRECTION('NONE', (0, -1, 0));
-#225 = VECTOR('NONE', #224, 1);
-#226 = CARTESIAN_POINT('NONE', (0, 0.64516, 2.58064));
-#227 = LINE('NONE', #226, #225);
-#228 = EDGE_CURVE('NONE', #5, #7, #63, .T.);
-#229 = EDGE_CURVE('NONE', #7, #9, #67, .T.);
-#230 = EDGE_CURVE('NONE', #11, #9, #71, .T.);
-#231 = EDGE_CURVE('NONE', #5, #11, #75, .T.);
-#232 = EDGE_CURVE('NONE', #7, #13, #79, .T.);
-#233 = EDGE_CURVE('NONE', #13, #15, #83, .T.);
-#234 = EDGE_CURVE('NONE', #9, #15, #87, .T.);
-#235 = EDGE_CURVE('NONE', #13, #17, #91, .T.);
-#236 = EDGE_CURVE('NONE', #17, #19, #95, .T.);
-#237 = EDGE_CURVE('NONE', #15, #19, #99, .T.);
-#238 = EDGE_CURVE('NONE', #17, #21, #103, .T.);
-#239 = EDGE_CURVE('NONE', #21, #23, #107, .T.);
-#240 = EDGE_CURVE('NONE', #19, #23, #111, .T.);
-#241 = EDGE_CURVE('NONE', #21, #25, #115, .T.);
-#242 = EDGE_CURVE('NONE', #25, #27, #119, .T.);
-#243 = EDGE_CURVE('NONE', #23, #27, #123, .T.);
-#244 = EDGE_CURVE('NONE', #25, #29, #127, .T.);
-#245 = EDGE_CURVE('NONE', #29, #31, #131, .T.);
-#246 = EDGE_CURVE('NONE', #27, #31, #135, .T.);
-#247 = EDGE_CURVE('NONE', #29, #33, #139, .T.);
-#248 = EDGE_CURVE('NONE', #33, #35, #143, .T.);
-#249 = EDGE_CURVE('NONE', #31, #35, #147, .T.);
-#250 = EDGE_CURVE('NONE', #33, #37, #151, .T.);
-#251 = EDGE_CURVE('NONE', #37, #39, #155, .T.);
-#252 = EDGE_CURVE('NONE', #35, #39, #159, .T.);
-#253 = EDGE_CURVE('NONE', #37, #41, #163, .T.);
-#254 = EDGE_CURVE('NONE', #41, #43, #167, .T.);
-#255 = EDGE_CURVE('NONE', #39, #43, #171, .T.);
-#256 = EDGE_CURVE('NONE', #41, #45, #175, .T.);
-#257 = EDGE_CURVE('NONE', #45, #47, #179, .T.);
-#258 = EDGE_CURVE('NONE', #43, #47, #183, .T.);
-#259 = EDGE_CURVE('NONE', #45, #49, #187, .T.);
-#260 = EDGE_CURVE('NONE', #49, #51, #191, .T.);
-#261 = EDGE_CURVE('NONE', #47, #51, #195, .T.);
-#262 = EDGE_CURVE('NONE', #49, #53, #199, .T.);
-#263 = EDGE_CURVE('NONE', #53, #55, #203, .T.);
-#264 = EDGE_CURVE('NONE', #51, #55, #207, .T.);
-#265 = EDGE_CURVE('NONE', #53, #57, #211, .T.);
-#266 = EDGE_CURVE('NONE', #57, #59, #215, .T.);
-#267 = EDGE_CURVE('NONE', #55, #59, #219, .T.);
-#268 = EDGE_CURVE('NONE', #57, #5, #223, .T.);
-#269 = EDGE_CURVE('NONE', #59, #11, #227, .T.);
-#270 = ORIENTED_EDGE('NONE', *, *, #228, .T.);
-#271 = ORIENTED_EDGE('NONE', *, *, #229, .T.);
-#272 = ORIENTED_EDGE('NONE', *, *, #230, .F.);
-#273 = ORIENTED_EDGE('NONE', *, *, #231, .F.);
-#274 = EDGE_LOOP('NONE', (#270, #271, #272, #273));
-#275 = ORIENTED_EDGE('NONE', *, *, #232, .T.);
-#276 = ORIENTED_EDGE('NONE', *, *, #233, .T.);
-#277 = ORIENTED_EDGE('NONE', *, *, #234, .F.);
-#278 = ORIENTED_EDGE('NONE', *, *, #229, .F.);
-#279 = EDGE_LOOP('NONE', (#275, #276, #277, #278));
-#280 = ORIENTED_EDGE('NONE', *, *, #235, .T.);
-#281 = ORIENTED_EDGE('NONE', *, *, #236, .T.);
-#282 = ORIENTED_EDGE('NONE', *, *, #237, .F.);
-#283 = ORIENTED_EDGE('NONE', *, *, #233, .F.);
-#284 = EDGE_LOOP('NONE', (#280, #281, #282, #283));
-#285 = ORIENTED_EDGE('NONE', *, *, #238, .T.);
-#286 = ORIENTED_EDGE('NONE', *, *, #239, .T.);
-#287 = ORIENTED_EDGE('NONE', *, *, #240, .F.);
-#288 = ORIENTED_EDGE('NONE', *, *, #236, .F.);
-#289 = EDGE_LOOP('NONE', (#285, #286, #287, #288));
-#290 = ORIENTED_EDGE('NONE', *, *, #241, .T.);
-#291 = ORIENTED_EDGE('NONE', *, *, #242, .T.);
-#292 = ORIENTED_EDGE('NONE', *, *, #243, .F.);
-#293 = ORIENTED_EDGE('NONE', *, *, #239, .F.);
-#294 = EDGE_LOOP('NONE', (#290, #291, #292, #293));
-#295 = ORIENTED_EDGE('NONE', *, *, #244, .T.);
-#296 = ORIENTED_EDGE('NONE', *, *, #245, .T.);
-#297 = ORIENTED_EDGE('NONE', *, *, #246, .F.);
-#298 = ORIENTED_EDGE('NONE', *, *, #242, .F.);
-#299 = EDGE_LOOP('NONE', (#295, #296, #297, #298));
-#300 = ORIENTED_EDGE('NONE', *, *, #247, .T.);
-#301 = ORIENTED_EDGE('NONE', *, *, #248, .T.);
-#302 = ORIENTED_EDGE('NONE', *, *, #249, .F.);
-#303 = ORIENTED_EDGE('NONE', *, *, #245, .F.);
-#304 = EDGE_LOOP('NONE', (#300, #301, #302, #303));
-#305 = ORIENTED_EDGE('NONE', *, *, #250, .T.);
-#306 = ORIENTED_EDGE('NONE', *, *, #251, .T.);
-#307 = ORIENTED_EDGE('NONE', *, *, #252, .F.);
-#308 = ORIENTED_EDGE('NONE', *, *, #248, .F.);
-#309 = EDGE_LOOP('NONE', (#305, #306, #307, #308));
-#310 = ORIENTED_EDGE('NONE', *, *, #253, .T.);
-#311 = ORIENTED_EDGE('NONE', *, *, #254, .T.);
-#312 = ORIENTED_EDGE('NONE', *, *, #255, .F.);
-#313 = ORIENTED_EDGE('NONE', *, *, #251, .F.);
-#314 = EDGE_LOOP('NONE', (#310, #311, #312, #313));
-#315 = ORIENTED_EDGE('NONE', *, *, #256, .T.);
-#316 = ORIENTED_EDGE('NONE', *, *, #257, .T.);
-#317 = ORIENTED_EDGE('NONE', *, *, #258, .F.);
-#318 = ORIENTED_EDGE('NONE', *, *, #254, .F.);
-#319 = EDGE_LOOP('NONE', (#315, #316, #317, #318));
-#320 = ORIENTED_EDGE('NONE', *, *, #259, .T.);
-#321 = ORIENTED_EDGE('NONE', *, *, #260, .T.);
-#322 = ORIENTED_EDGE('NONE', *, *, #261, .F.);
-#323 = ORIENTED_EDGE('NONE', *, *, #257, .F.);
-#324 = EDGE_LOOP('NONE', (#320, #321, #322, #323));
-#325 = ORIENTED_EDGE('NONE', *, *, #262, .T.);
-#326 = ORIENTED_EDGE('NONE', *, *, #263, .T.);
-#327 = ORIENTED_EDGE('NONE', *, *, #264, .F.);
-#328 = ORIENTED_EDGE('NONE', *, *, #260, .F.);
-#329 = EDGE_LOOP('NONE', (#325, #326, #327, #328));
-#330 = ORIENTED_EDGE('NONE', *, *, #265, .T.);
-#331 = ORIENTED_EDGE('NONE', *, *, #266, .T.);
-#332 = ORIENTED_EDGE('NONE', *, *, #267, .F.);
-#333 = ORIENTED_EDGE('NONE', *, *, #263, .F.);
-#334 = EDGE_LOOP('NONE', (#330, #331, #332, #333));
-#335 = ORIENTED_EDGE('NONE', *, *, #268, .T.);
-#336 = ORIENTED_EDGE('NONE', *, *, #231, .T.);
-#337 = ORIENTED_EDGE('NONE', *, *, #269, .F.);
-#338 = ORIENTED_EDGE('NONE', *, *, #266, .F.);
-#339 = EDGE_LOOP('NONE', (#335, #336, #337, #338));
-#340 = ORIENTED_EDGE('NONE', *, *, #228, .T.);
-#341 = ORIENTED_EDGE('NONE', *, *, #232, .T.);
-#342 = ORIENTED_EDGE('NONE', *, *, #235, .T.);
-#343 = ORIENTED_EDGE('NONE', *, *, #238, .T.);
-#344 = ORIENTED_EDGE('NONE', *, *, #241, .T.);
-#345 = ORIENTED_EDGE('NONE', *, *, #244, .T.);
-#346 = ORIENTED_EDGE('NONE', *, *, #247, .T.);
-#347 = ORIENTED_EDGE('NONE', *, *, #250, .T.);
-#348 = ORIENTED_EDGE('NONE', *, *, #253, .T.);
-#349 = ORIENTED_EDGE('NONE', *, *, #256, .T.);
-#350 = ORIENTED_EDGE('NONE', *, *, #259, .T.);
-#351 = ORIENTED_EDGE('NONE', *, *, #262, .T.);
-#352 = ORIENTED_EDGE('NONE', *, *, #265, .T.);
-#353 = ORIENTED_EDGE('NONE', *, *, #268, .T.);
-#354 = EDGE_LOOP('NONE', (#340, #341, #342, #343, #344, #345, #346, #347, #348, #349, #350, #351, #352, #353));
-#355 = ORIENTED_EDGE('NONE', *, *, #230, .T.);
-#356 = ORIENTED_EDGE('NONE', *, *, #234, .T.);
-#357 = ORIENTED_EDGE('NONE', *, *, #237, .T.);
-#358 = ORIENTED_EDGE('NONE', *, *, #240, .T.);
-#359 = ORIENTED_EDGE('NONE', *, *, #243, .T.);
-#360 = ORIENTED_EDGE('NONE', *, *, #246, .T.);
-#361 = ORIENTED_EDGE('NONE', *, *, #249, .T.);
-#362 = ORIENTED_EDGE('NONE', *, *, #252, .T.);
-#363 = ORIENTED_EDGE('NONE', *, *, #255, .T.);
-#364 = ORIENTED_EDGE('NONE', *, *, #258, .T.);
-#365 = ORIENTED_EDGE('NONE', *, *, #261, .T.);
-#366 = ORIENTED_EDGE('NONE', *, *, #264, .T.);
-#367 = ORIENTED_EDGE('NONE', *, *, #267, .T.);
-#368 = ORIENTED_EDGE('NONE', *, *, #269, .T.);
-#369 = EDGE_LOOP('NONE', (#355, #356, #357, #358, #359, #360, #361, #362, #363, #364, #365, #366, #367, #368));
-#370 = CARTESIAN_POINT('NONE', (0, -0.3225799999999985, 1.2903199999999995));
-#371 = DIRECTION('NONE', (-1, -0, 0));
-#372 = AXIS2_PLACEMENT_3D('NONE', #370, #371, $);
-#373 = PLANE('NONE', #372);
-#374 = CARTESIAN_POINT('NONE', (0.9983910612778368, -0.6451599999999998, 1.2903199999999997));
-#375 = DIRECTION('NONE', (0, -1, 0));
-#376 = AXIS2_PLACEMENT_3D('NONE', #374, #375, $);
-#377 = PLANE('NONE', #376);
-#378 = CARTESIAN_POINT('NONE', (2.918166090585415, -1.2903199999999988, 1.2903199999999997));
-#379 = DIRECTION('NONE', (-0.5735764363510459, -0.8191520442889919, 0));
-#380 = AXIS2_PLACEMENT_3D('NONE', #378, #379, $);
-#381 = PLANE('NONE', #380);
-#382 = CARTESIAN_POINT('NONE', (4.984285029307579, -1.9354799999999992, 1.2903199999999997));
-#383 = DIRECTION('NONE', (0, -1, 0));
-#384 = AXIS2_PLACEMENT_3D('NONE', #382, #383, $);
-#385 = PLANE('NONE', #384);
-#386 = CARTESIAN_POINT('NONE', (6.129019999999999, -1.7741899999999997, 1.2903199999999997));
-#387 = DIRECTION('NONE', (1, -0, 0));
-#388 = AXIS2_PLACEMENT_3D('NONE', #386, #387, $);
-#389 = PLANE('NONE', #388);
-#390 = CARTESIAN_POINT('NONE', (5.035139570965871, -1.6128999999999998, 1.2903199999999997));
-#391 = DIRECTION('NONE', (0, 1, -0));
-#392 = AXIS2_PLACEMENT_3D('NONE', #390, #391, $);
-#393 = PLANE('NONE', #392);
-#394 = CARTESIAN_POINT('NONE', (2.7895291818945633, -0.8064499999999998, 1.2903199999999995));
-#395 = DIRECTION('NONE', (0.5735764363510459, 0.8191520442889918, -0));
-#396 = AXIS2_PLACEMENT_3D('NONE', #394, #395, $);
-#397 = PLANE('NONE', #396);
-#398 = CARTESIAN_POINT('NONE', (2.6754617854843468, 0.4838700000000003, 1.2903199999999997));
-#399 = DIRECTION('NONE', (0.4226182617406992, -0.90630778703665, 0));
-#400 = AXIS2_PLACEMENT_3D('NONE', #398, #399, $);
-#401 = PLANE('NONE', #400);
-#402 = CARTESIAN_POINT('NONE', (4.921072174555653, 0.9677399999999998, 1.2903199999999995));
-#403 = DIRECTION('NONE', (0, -1, 0));
-#404 = AXIS2_PLACEMENT_3D('NONE', #402, #403, $);
-#405 = PLANE('NONE', #404);
-#406 = CARTESIAN_POINT('NONE', (6.129019999999998, 1.1290299999999989, 1.2903199999999995));
-#407 = DIRECTION('NONE', (1, -0, 0));
-#408 = AXIS2_PLACEMENT_3D('NONE', #406, #407, $);
-#409 = PLANE('NONE', #408);
-#410 = CARTESIAN_POINT('NONE', (4.8853150424179725, 1.2903199999999997, 1.2903199999999997));
-#411 = DIRECTION('NONE', (0, 1, -0));
-#412 = AXIS2_PLACEMENT_3D('NONE', #410, #411, $);
-#413 = PLANE('NONE', #412);
-#414 = CARTESIAN_POINT('NONE', (2.9498350424179733, 0.9677399999999998, 1.2903199999999997));
-#415 = DIRECTION('NONE', (-0.42261826174069933, 0.9063077870366499, -0));
-#416 = AXIS2_PLACEMENT_3D('NONE', #414, #415, $);
-#417 = PLANE('NONE', #416);
-#418 = CARTESIAN_POINT('NONE', (1.1290299999999998, 0.6451599999999998, 1.29032));
-#419 = DIRECTION('NONE', (0, 1, -0));
-#420 = AXIS2_PLACEMENT_3D('NONE', #418, #419, $);
-#421 = PLANE('NONE', #420);
-#422 = CARTESIAN_POINT('NONE', (0, 0.32257999999999987, 1.2903199999999995));
-#423 = DIRECTION('NONE', (-1, -0, 0));
-#424 = AXIS2_PLACEMENT_3D('NONE', #422, #423, $);
-#425 = PLANE('NONE', #424);
-#426 = CARTESIAN_POINT('NONE', (0, 0, -0));
-#427 = DIRECTION('NONE', (0, 0, 1));
-#428 = AXIS2_PLACEMENT_3D('NONE', #426, #427, $);
-#429 = PLANE('NONE', #428);
-#430 = CARTESIAN_POINT('NONE', (0, 0, 2.58064));
-#431 = DIRECTION('NONE', (0, 0, 1));
-#432 = AXIS2_PLACEMENT_3D('NONE', #430, #431, $);
-#433 = PLANE('NONE', #432);
-#434 = FACE_OUTER_BOUND('NONE', #274, .T.);
-#435 = ADVANCED_FACE('NONE', (#434), #373, .T.);
-#436 = FACE_OUTER_BOUND('NONE', #279, .T.);
-#437 = ADVANCED_FACE('NONE', (#436), #377, .T.);
-#438 = FACE_OUTER_BOUND('NONE', #284, .T.);
-#439 = ADVANCED_FACE('NONE', (#438), #381, .T.);
-#440 = FACE_OUTER_BOUND('NONE', #289, .T.);
-#441 = ADVANCED_FACE('NONE', (#440), #385, .T.);
-#442 = FACE_OUTER_BOUND('NONE', #294, .T.);
-#443 = ADVANCED_FACE('NONE', (#442), #389, .T.);
-#444 = FACE_OUTER_BOUND('NONE', #299, .T.);
-#445 = ADVANCED_FACE('NONE', (#444), #393, .T.);
-#446 = FACE_OUTER_BOUND('NONE', #304, .T.);
-#447 = ADVANCED_FACE('NONE', (#446), #397, .T.);
-#448 = FACE_OUTER_BOUND('NONE', #309, .T.);
-#449 = ADVANCED_FACE('NONE', (#448), #401, .T.);
-#450 = FACE_OUTER_BOUND('NONE', #314, .T.);
-#451 = ADVANCED_FACE('NONE', (#450), #405, .T.);
-#452 = FACE_OUTER_BOUND('NONE', #319, .T.);
-#453 = ADVANCED_FACE('NONE', (#452), #409, .T.);
-#454 = FACE_OUTER_BOUND('NONE', #324, .T.);
-#455 = ADVANCED_FACE('NONE', (#454), #413, .T.);
-#456 = FACE_OUTER_BOUND('NONE', #329, .T.);
-#457 = ADVANCED_FACE('NONE', (#456), #417, .T.);
-#458 = FACE_OUTER_BOUND('NONE', #334, .T.);
-#459 = ADVANCED_FACE('NONE', (#458), #421, .T.);
-#460 = FACE_OUTER_BOUND('NONE', #339, .T.);
-#461 = ADVANCED_FACE('NONE', (#460), #425, .T.);
-#462 = FACE_OUTER_BOUND('NONE', #354, .F.);
-#463 = ADVANCED_FACE('NONE', (#462), #429, .F.);
-#464 = FACE_OUTER_BOUND('NONE', #369, .T.);
-#465 = ADVANCED_FACE('NONE', (#464), #433, .T.);
-#466 = CLOSED_SHELL('NONE', (#435, #437, #439, #441, #443, #445, #447, #449, #451, #453, #455, #457, #459, #461, #463, #465));
-#467 = ORIENTED_CLOSED_SHELL('NONE', *, #466, .T.);
-#468 = MANIFOLD_SOLID_BREP('NONE', #467);
-#469 = APPLICATION_CONTEXT('configuration controlled 3D design of mechanical parts and assemblies');
-#470 = PRODUCT_DEFINITION_CONTEXT('part definition', #469, 'design');
-#471 = PRODUCT('UNIDENTIFIED_PRODUCT', 'NONE', $, ());
-#472 = PRODUCT_DEFINITION_FORMATION('', $, #471);
-#473 = PRODUCT_DEFINITION('design', $, #472, #470);
-#474 = PRODUCT_DEFINITION_SHAPE('NONE', $, #473);
-#475 = ADVANCED_BREP_SHAPE_REPRESENTATION('NONE', (#468), #3);
-#476 = SHAPE_DEFINITION_REPRESENTATION(#474, #475);
-ENDSEC;
-END-ISO-10303-21;

e2e/playwright/export-snapshots/stl-ascii.stl

@@ -1,478 +0,0 @@
-solid unnamed
-facet normal -1 0 0
-    outer loop
-        vertex 0 -101.600006 0
-        vertex 0 -0 0
-        vertex 0 -101.600006 -25.400002
-    endloop
-endfacet
-facet normal -1 0 0
-    outer loop
-        vertex 0 -101.600006 -25.400002
-        vertex 0 -0 0
-        vertex 0 -0 -25.400002
-    endloop
-endfacet
-facet normal 0 0 -1
-    outer loop
-        vertex 0 -101.600006 -25.400002
-        vertex 0 -0 -25.400002
-        vertex 78.613464 -101.600006 -25.400002
-    endloop
-endfacet
-facet normal 0 0 -1
-    outer loop
-        vertex 78.613464 -101.600006 -25.400002
-        vertex 0 -0 -25.400002
-        vertex 78.613464 -0 -25.400002
-    endloop
-endfacet
-facet normal -0.5735764 0 -0.8191522
-    outer loop
-        vertex 78.613464 -101.600006 -25.400002
-        vertex 78.613464 -0 -25.400002
-        vertex 151.16339 -101.600006 -76.2
-    endloop
-endfacet
-facet normal -0.5735764 0 -0.8191522
-    outer loop
-        vertex 151.16339 -101.600006 -76.2
-        vertex 78.613464 -0 -25.400002
-        vertex 151.16339 -0 -76.2
-    endloop
-endfacet
-facet normal 0 0 -1
-    outer loop
-        vertex 151.16339 -101.600006 -76.2
-        vertex 151.16339 -0 -76.2
-        vertex 241.3 -101.600006 -76.2
-    endloop
-endfacet
-facet normal 0 0 -1
-    outer loop
-        vertex 241.3 -101.600006 -76.2
-        vertex 151.16339 -0 -76.2
-        vertex 241.3 -0 -76.2
-    endloop
-endfacet
-facet normal 1 0 0
-    outer loop
-        vertex 241.3 -101.600006 -76.2
-        vertex 241.3 -0 -76.2
-        vertex 241.3 -101.600006 -63.5
-    endloop
-endfacet
-facet normal 1 -0 0
-    outer loop
-        vertex 241.3 -101.600006 -63.5
-        vertex 241.3 -0 -76.2
-        vertex 241.3 -0 -63.5
-    endloop
-endfacet
-facet normal 0 -0 1
-    outer loop
-        vertex 241.3 -101.600006 -63.5
-        vertex 241.3 -0 -63.5
-        vertex 155.16768 -101.600006 -63.5
-    endloop
-endfacet
-facet normal 0 0 1
-    outer loop
-        vertex 155.16768 -101.600006 -63.5
-        vertex 241.3 -0 -63.5
-        vertex 155.16768 -0 -63.5
-    endloop
-endfacet
-facet normal 0.5735765 0 0.81915194
-    outer loop
-        vertex 87.15214 -101.600006 -15.875
-        vertex 109.82398 -101.600006 -31.75
-        vertex 109.82398 -0 -31.75
-    endloop
-endfacet
-facet normal 0.57357645 0 0.819152
-    outer loop
-        vertex 109.82398 -101.600006 -31.75
-        vertex 155.16768 -101.600006 -63.5
-        vertex 155.16768 -0 -63.5
-    endloop
-endfacet
-facet normal 0.57357645 0 0.81915206
-    outer loop
-        vertex 87.15214 -0 -15.875
-        vertex 64.480286 -101.600006 0
-        vertex 87.15214 -101.600006 -15.875
-    endloop
-endfacet
-facet normal 0.5735765 0 0.81915194
-    outer loop
-        vertex 109.82398 -0 -31.75
-        vertex 87.15214 -0 -15.875
-        vertex 87.15214 -101.600006 -15.875
-    endloop
-endfacet
-facet normal 0.57357645 -0 0.819152
-    outer loop
-        vertex 109.82398 -101.600006 -31.75
-        vertex 155.16768 -0 -63.5
-        vertex 109.82398 -0 -31.75
-    endloop
-endfacet
-facet normal 0.57357645 -0 0.81915206
-    outer loop
-        vertex 64.480286 -101.600006 0
-        vertex 87.15214 -0 -15.875
-        vertex 64.480286 -0 0
-    endloop
-endfacet
-facet normal 0.4226182 0 -0.9063078
-    outer loop
-        vertex 84.906715 -101.600006 9.525
-        vertex 64.480286 -101.600006 0
-        vertex 64.480286 -0 0
-    endloop
-endfacet
-facet normal 0.42261833 0 -0.90630776
-    outer loop
-        vertex 105.33314 -101.600006 19.05
-        vertex 84.906715 -101.600006 9.525
-        vertex 84.906715 -0 9.525
-    endloop
-endfacet
-facet normal 0.4226182 0 -0.9063078
-    outer loop
-        vertex 84.906715 -0 9.525
-        vertex 84.906715 -101.600006 9.525
-        vertex 64.480286 -0 0
-    endloop
-endfacet
-facet normal 0.4226183 0 -0.9063078
-    outer loop
-        vertex 105.33314 -0 19.05
-        vertex 146.18599 -101.600006 38.1
-        vertex 105.33314 -101.600006 19.05
-    endloop
-endfacet
-facet normal 0.42261833 0 -0.90630776
-    outer loop
-        vertex 105.33314 -101.600006 19.05
-        vertex 84.906715 -0 9.525
-        vertex 105.33314 -0 19.05
-    endloop
-endfacet
-facet normal 0.4226183 0 -0.9063078
-    outer loop
-        vertex 146.18599 -101.600006 38.1
-        vertex 105.33314 -0 19.05
-        vertex 146.18599 -0 38.1
-    endloop
-endfacet
-facet normal 0 0 -1
-    outer loop
-        vertex 146.18599 -101.600006 38.1
-        vertex 146.18599 -0 38.1
-        vertex 241.3 -101.600006 38.1
-    endloop
-endfacet
-facet normal 0 0 -1
-    outer loop
-        vertex 241.3 -101.600006 38.1
-        vertex 146.18599 -0 38.1
-        vertex 241.3 -0 38.1
-    endloop
-endfacet
-facet normal 1 0 0
-    outer loop
-        vertex 241.3 -101.600006 38.1
-        vertex 241.3 -0 38.1
-        vertex 241.3 -101.600006 50.800003
-    endloop
-endfacet
-facet normal 1 -0 0
-    outer loop
-        vertex 241.3 -101.600006 50.800003
-        vertex 241.3 -0 38.1
-        vertex 241.3 -0 50.800003
-    endloop
-endfacet
-facet normal 0 -0 0.99999994
-    outer loop
-        vertex 241.3 -101.600006 50.800003
-        vertex 241.3 -0 50.800003
-        vertex 143.37048 -101.600006 50.800003
-    endloop
-endfacet
-facet normal 0 0 0.99999994
-    outer loop
-        vertex 143.37048 -101.600006 50.800003
-        vertex 241.3 -0 50.800003
-        vertex 143.37048 -0 50.800003
-    endloop
-endfacet
-facet normal -0.42261827 0 0.9063078
-    outer loop
-        vertex 143.37048 -101.600006 50.800003
-        vertex 143.37048 -0 50.800003
-        vertex 88.9 -101.600006 25.400002
-    endloop
-endfacet
-facet normal -0.42261827 0 0.9063078
-    outer loop
-        vertex 88.9 -101.600006 25.400002
-        vertex 143.37048 -0 50.800003
-        vertex 88.9 -0 25.400002
-    endloop
-endfacet
-facet normal 0 -0 1
-    outer loop
-        vertex 88.9 -101.600006 25.400002
-        vertex 88.9 -0 25.400002
-        vertex 0 -101.600006 25.400002
-    endloop
-endfacet
-facet normal 0 0 1
-    outer loop
-        vertex 0 -101.600006 25.400002
-        vertex 88.9 -0 25.400002
-        vertex 0 -0 25.400002
-    endloop
-endfacet
-facet normal -1 0 0
-    outer loop
-        vertex 0 -101.600006 25.400002
-        vertex 0 -0 25.400002
-        vertex 0 -101.600006 0
-    endloop
-endfacet
-facet normal -1 0 0
-    outer loop
-        vertex 0 -101.600006 0
-        vertex 0 -0 25.400002
-        vertex 0 -0 0
-    endloop
-endfacet
-facet normal 0 1 -0
-    outer loop
-        vertex 84.906715 -0 9.525
-        vertex 64.480286 -0 0
-        vertex 88.9 -0 25.400002
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 105.33314 -0 19.05
-        vertex 84.906715 -0 9.525
-        vertex 88.9 -0 25.400002
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 87.15214 -0 -15.875
-        vertex 109.82398 -0 -31.75
-        vertex 78.613464 -0 -25.400002
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 105.33314 -0 19.05
-        vertex 143.37048 -0 50.800003
-        vertex 146.18599 -0 38.1
-    endloop
-endfacet
-facet normal -0 1 0
-    outer loop
-        vertex 0 -0 25.400002
-        vertex 88.9 -0 25.400002
-        vertex 64.480286 -0 0
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 0 -0 25.400002
-        vertex 64.480286 -0 0
-        vertex 0 -0 0
-    endloop
-endfacet
-facet normal -0 1 0
-    outer loop
-        vertex 143.37048 -0 50.800003
-        vertex 241.3 -0 50.800003
-        vertex 146.18599 -0 38.1
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 241.3 -0 50.800003
-        vertex 241.3 -0 38.1
-        vertex 146.18599 -0 38.1
-    endloop
-endfacet
-facet normal 0 1 -0
-    outer loop
-        vertex 105.33314 -0 19.05
-        vertex 88.9 -0 25.400002
-        vertex 143.37048 -0 50.800003
-    endloop
-endfacet
-facet normal 0 0.99999994 0
-    outer loop
-        vertex 64.480286 -0 0
-        vertex 87.15214 -0 -15.875
-        vertex 78.613464 -0 -25.400002
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 109.82398 -0 -31.75
-        vertex 151.16339 -0 -76.2
-        vertex 78.613464 -0 -25.400002
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 155.16768 -0 -63.5
-        vertex 151.16339 -0 -76.2
-        vertex 109.82398 -0 -31.75
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 241.3 -0 -63.5
-        vertex 241.3 -0 -76.2
-        vertex 155.16768 -0 -63.5
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 155.16768 -0 -63.5
-        vertex 241.3 -0 -76.2
-        vertex 151.16339 -0 -76.2
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 64.480286 -0 0
-        vertex 78.613464 -0 -25.400002
-        vertex 0 -0 -25.400002
-    endloop
-endfacet
-facet normal 0 1 0
-    outer loop
-        vertex 0 -0 -25.400002
-        vertex 0 -0 0
-        vertex 64.480286 -0 0
-    endloop
-endfacet
-facet normal -0 -1 0
-    outer loop
-        vertex 84.906715 -101.600006 9.525
-        vertex 88.9 -101.600006 25.400002
-        vertex 64.480286 -101.600006 0
-    endloop
-endfacet
-facet normal -0 -1 0
-    outer loop
-        vertex 105.33314 -101.600006 19.05
-        vertex 88.9 -101.600006 25.400002
-        vertex 84.906715 -101.600006 9.525
-    endloop
-endfacet
-facet normal 0 -1 -0
-    outer loop
-        vertex 87.15214 -101.600006 -15.875
-        vertex 78.613464 -101.600006 -25.400002
-        vertex 109.82398 -101.600006 -31.75
-    endloop
-endfacet
-facet normal 0 -1 0
-    outer loop
-        vertex 105.33314 -101.600006 19.05
-        vertex 146.18599 -101.600006 38.1
-        vertex 143.37048 -101.600006 50.800003
-    endloop
-endfacet
-facet normal 0 -1 0
-    outer loop
-        vertex 0 -101.600006 25.400002
-        vertex 64.480286 -101.600006 0
-        vertex 88.9 -101.600006 25.400002
-    endloop
-endfacet
-facet normal 0 -1 0
-    outer loop
-        vertex 0 -101.600006 25.400002
-        vertex 0 -101.600006 0
-        vertex 64.480286 -101.600006 0
-    endloop
-endfacet
-facet normal 0 -1 0
-    outer loop
-        vertex 143.37048 -101.600006 50.800003
-        vertex 146.18599 -101.600006 38.1
-        vertex 241.3 -101.600006 50.800003
-    endloop
-endfacet
-facet normal 0 -1 -0
-    outer loop
-        vertex 241.3 -101.600006 50.800003
-        vertex 146.18599 -101.600006 38.1
-        vertex 241.3 -101.600006 38.1
-    endloop
-endfacet
-facet normal 0 -1 0
-    outer loop
-        vertex 105.33314 -101.600006 19.05
-        vertex 143.37048 -101.600006 50.800003
-        vertex 88.9 -101.600006 25.400002
-    endloop
-endfacet
-facet normal 0 -0.99999994 0
-    outer loop
-        vertex 64.480286 -101.600006 0
-        vertex 78.613464 -101.600006 -25.400002
-        vertex 87.15214 -101.600006 -15.875
-    endloop
-endfacet
-facet normal -0 -1 -0
-    outer loop
-        vertex 109.82398 -101.600006 -31.75
-        vertex 78.613464 -101.600006 -25.400002
-        vertex 151.16339 -101.600006 -76.2
-    endloop
-endfacet
-facet normal -0 -1 0
-    outer loop
-        vertex 155.16768 -101.600006 -63.5
-        vertex 109.82398 -101.600006 -31.75
-        vertex 151.16339 -101.600006 -76.2
-    endloop
-endfacet
-facet normal -0 -1 -0
-    outer loop
-        vertex 241.3 -101.600006 -63.5
-        vertex 155.16768 -101.600006 -63.5
-        vertex 241.3 -101.600006 -76.2
-    endloop
-endfacet
-facet normal 0 -1 -0
-    outer loop
-        vertex 155.16768 -101.600006 -63.5
-        vertex 151.16339 -101.600006 -76.2
-        vertex 241.3 -101.600006 -76.2
-    endloop
-endfacet
-facet normal 0 -1 -0
-    outer loop
-        vertex 64.480286 -101.600006 0
-        vertex 0 -101.600006 -25.400002
-        vertex 78.613464 -101.600006 -25.400002
-    endloop
-endfacet
-facet normal 0 -1 0
-    outer loop
-        vertex 0 -101.600006 -25.400002
-        vertex 64.480286 -101.600006 0
-        vertex 0 -101.600006 0
-    endloop
-endfacet
-endsolid unnamed

e2e/playwright/flow-tests.spec.ts

@@ -3,6 +3,7 @@ import { secrets } from './secrets'
 import { getUtils } from './test-utils'
 import waitOn from 'wait-on'
 import { Themes } from '../../src/lib/theme'
+import { initialSettings } from '../../src/lib/settings/initialSettings'
 import { roundOff } from 'lib/utils'
 
 /*
@@ -19,6 +20,8 @@ const commonPoints = {
   startAt: '[9.06, -12.22]',
   num1: 9.14,
   num2: 18.2,
+  // num1: 9.64,
+  // num2: 19.19,
 }
 
 test.beforeEach(async ({ context, page }) => {
@@ -75,6 +78,7 @@ test('Basic sketch', async ({ page }) => {
   await expect(page.locator('.cm-content')).toHaveText(
     `const part001 = startSketchOn('-XZ')`
   )
+  await u.closeDebugPanel()
 
   await page.waitForTimeout(300) // TODO detect animation ending, or disable animation
 
@@ -85,7 +89,6 @@ test('Basic sketch', async ({ page }) => {
   |> startProfileAt(${commonPoints.startAt}, %)`)
   await page.waitForTimeout(100)
 
-  await u.closeDebugPanel()
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(100)
 
@@ -129,11 +132,131 @@ test('Basic sketch', async ({ page }) => {
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${commonPoints.startAt}, %)
-  |> line({ to: [${commonPoints.num1}, 0], tag: 'seg01' }, %)
+  |> line([${commonPoints.num1}, 0], %, 'seg01')
   |> line([0, ${commonPoints.num1}], %)
   |> angledLine([180, segLen('seg01', %)], %)`)
 })
 
+test('Can moving camera', async ({ page, context }) => {
+  test.skip(process.platform === 'darwin', 'Can moving camera')
+  const u = getUtils(page)
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await u.openAndClearDebugPanel()
+
+  const camPos: [number, number, number] = [0, 85, 85]
+  const bakeInRetries = async (
+    mouseActions: any,
+    xyz: [number, number, number],
+    cnt = 0
+  ) => {
+    // hack that we're implemented our own retry instead of using retries built into playwright.
+    // however each of these camera drags can be flaky, because of udp
+    // and so putting them together means only one needs to fail to make this test extra flaky.
+    // this way we can retry within the test
+    // We could break them out into separate tests, but the longest past of the test is waiting
+    // for the stream to start, so it can be good to bundle related things together.
+
+    await u.updateCamPosition(camPos)
+    await page.waitForTimeout(100)
+
+    // rotate
+    await u.closeDebugPanel()
+    await page.getByRole('button', { name: 'Start Sketch' }).click()
+    await page.waitForTimeout(100)
+    // const yo = page.getByTestId('cam-x-position').inputValue()
+
+    await u.doAndWaitForImageDiff(async () => {
+      await mouseActions()
+
+      await u.openAndClearDebugPanel()
+
+      await u.closeDebugPanel()
+      await page.waitForTimeout(100)
+    }, 300)
+
+    await u.openAndClearDebugPanel()
+    const vals = await Promise.all([
+      page.getByTestId('cam-x-position').inputValue(),
+      page.getByTestId('cam-y-position').inputValue(),
+      page.getByTestId('cam-z-position').inputValue(),
+    ])
+    const xError = Math.abs(Number(vals[0]) + xyz[0])
+    const yError = Math.abs(Number(vals[1]) + xyz[1])
+    const zError = Math.abs(Number(vals[2]) + xyz[2])
+
+    let shouldRetry = false
+
+    if (xError > 5 || yError > 5 || zError > 5) {
+      if (cnt > 2) {
+        console.log('xVal', vals[0], 'xError', xError)
+        console.log('yVal', vals[1], 'yError', yError)
+        console.log('zVal', vals[2], 'zError', zError)
+
+        throw new Error('Camera position not as expected')
+      }
+      shouldRetry = true
+    }
+    await page.getByRole('button', { name: 'Exit Sketch' }).click()
+    await page.waitForTimeout(100)
+    if (shouldRetry) await bakeInRetries(mouseActions, xyz, cnt + 1)
+  }
+  await bakeInRetries(async () => {
+    await page.mouse.move(700, 200)
+    await page.mouse.down({ button: 'right' })
+    await page.mouse.move(600, 303)
+    await page.mouse.up({ button: 'right' })
+  }, [4, -10.5, -120])
+
+  await bakeInRetries(async () => {
+    await page.keyboard.down('Shift')
+    await page.mouse.move(600, 200)
+    await page.mouse.down({ button: 'right' })
+    await page.mouse.move(700, 200, { steps: 2 })
+    await page.mouse.up({ button: 'right' })
+    await page.keyboard.up('Shift')
+  }, [-10, -85, -85])
+
+  await u.updateCamPosition(camPos)
+
+  await u.clearCommandLogs()
+  await u.closeDebugPanel()
+
+  await page.getByRole('button', { name: 'Start Sketch' }).click()
+  await page.waitForTimeout(200)
+
+  // zoom
+  await u.doAndWaitForImageDiff(async () => {
+    await page.keyboard.down('Control')
+    await page.mouse.move(700, 400)
+    await page.mouse.down({ button: 'right' })
+    await page.mouse.move(700, 300)
+    await page.mouse.up({ button: 'right' })
+    await page.keyboard.up('Control')
+
+    await u.openDebugPanel()
+    await page.waitForTimeout(300)
+    await u.clearCommandLogs()
+
+    await u.closeDebugPanel()
+  }, 300)
+
+  // zoom with scroll
+  await u.openAndClearDebugPanel()
+  // TODO, it appears we don't get the cam setting back from the engine when the interaction is zoom into `backInRetries` once the information is sent back on zoom
+  // await expect(Math.abs(Number(await page.getByTestId('cam-x-position').inputValue()) + 12)).toBeLessThan(1.5)
+  // await expect(Math.abs(Number(await page.getByTestId('cam-y-position').inputValue()) - 85)).toBeLessThan(1.5)
+  // await expect(Math.abs(Number(await page.getByTestId('cam-z-position').inputValue()) - 85)).toBeLessThan(1.5)
+
+  await page.getByRole('button', { name: 'Exit Sketch' }).click()
+
+  await bakeInRetries(async () => {
+    await page.mouse.move(700, 400)
+    await page.mouse.wheel(0, -100)
+  }, [1, -94, -94])
+})
+
 test('if you write invalid kcl you get inlined errors', async ({ page }) => {
   const u = getUtils(page)
   await page.setViewportSize({ width: 1000, height: 500 })
@@ -351,8 +474,18 @@ test('Auto complete works', async ({ page }) => {
   const u = getUtils(page)
   // const PUR = 400 / 37.5 //pixeltoUnitRatio
   await page.setViewportSize({ width: 1200, height: 500 })
+  const lspStartPromise = page.waitForEvent('console', async (message) => {
+    // it would be better to wait for a message that the kcl lsp has started by looking for the message  message.text().includes('[lsp] [window/logMessage]')
+    // but that doesn't seem to make it to the console for macos/safari :(
+    if (message.text().includes('start kcl lsp')) {
+      await new Promise((resolve) => setTimeout(resolve, 200))
+      return true
+    }
+    return false
+  })
   await page.goto('/')
   await u.waitForAuthSkipAppStart()
+  await lspStartPromise
 
   // this test might be brittle as we add and remove functions
   // but should also be easy to update.
@@ -395,6 +528,55 @@ test('Auto complete works', async ({ page }) => {
   |> xLine(5, %) // lin`)
 })
 
+// Stored settings validation test
+test('Stored settings are validated and fall back to defaults', async ({
+  page,
+  context,
+}) => {
+  // Override beforeEach test setup
+  // with corrupted settings
+  await context.addInitScript(async () => {
+    const storedSettings = JSON.parse(
+      localStorage.getItem('SETTINGS_PERSIST_KEY') || '{}'
+    )
+
+    // Corrupt the settings
+    storedSettings.baseUnit = 'invalid'
+    storedSettings.cameraControls = `() => alert('hack the planet')`
+    storedSettings.defaultDirectory = 123
+    storedSettings.defaultProjectName = false
+
+    localStorage.setItem('SETTINGS_PERSIST_KEY', JSON.stringify(storedSettings))
+  })
+
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.goto('/', { waitUntil: 'domcontentloaded' })
+
+  // Check the toast appeared
+  await expect(
+    page.getByText(`Error validating persisted settings:`, {
+      exact: false,
+    })
+  ).toBeVisible()
+
+  // Check the settings were reset
+  const storedSettings = JSON.parse(
+    await page.evaluate(
+      () => localStorage.getItem('SETTINGS_PERSIST_KEY') || '{}'
+    )
+  )
+  await expect(storedSettings.baseUnit).toBe(initialSettings.baseUnit)
+  await expect(storedSettings.cameraControls).toBe(
+    initialSettings.cameraControls
+  )
+  await expect(storedSettings.defaultDirectory).toBe(
+    initialSettings.defaultDirectory
+  )
+  await expect(storedSettings.defaultProjectName).toBe(
+    initialSettings.defaultProjectName
+  )
+})
+
 // Onboarding tests
 test('Onboarding redirects and code updating', async ({ page, context }) => {
   const u = getUtils(page)
@@ -455,7 +637,7 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   const emptySpaceClick = () =>
     page.mouse.click(728, 343).then(() => page.waitForTimeout(100))
   const topHorzSegmentClick = () =>
-    page.mouse.click(709, 289).then(() => page.waitForTimeout(100))
+    page.mouse.click(709, 290).then(() => page.waitForTimeout(100))
   const bottomHorzSegmentClick = () =>
     page.mouse.click(767, 396).then(() => page.waitForTimeout(100))
 
@@ -470,13 +652,12 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   await page.waitForTimeout(700) // wait for animation
 
   const startXPx = 600
+  await u.closeDebugPanel()
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${commonPoints.startAt}, %)`)
 
-  await u.closeDebugPanel()
-
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
 
   await expect(page.locator('.cm-content'))
@@ -557,13 +738,18 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     await emptySpaceClick()
 
     // select segment in editor than another segment in scene and check there are two cursors
-    await page.getByText(`  |> line([-${commonPoints.num2}, 0], %)`).click()
-    await page.waitForTimeout(300)
-    await page.keyboard.down('Shift')
-    await expect(page.locator('.cm-cursor')).toHaveCount(1)
+    // TODO change this back to shift click in the scene, not cmd click in the editor
     await bottomHorzSegmentClick()
-    await page.keyboard.up('Shift')
+
+    await expect(page.locator('.cm-cursor')).toHaveCount(1)
+
+    await page.keyboard.down(process.platform === 'linux' ? 'Control' : 'Meta')
+    await page.waitForTimeout(100)
+    await page.getByText(`  |> line([-${commonPoints.num2}, 0], %)`).click()
+
     await expect(page.locator('.cm-cursor')).toHaveCount(2)
+    await page.waitForTimeout(500)
+    await page.keyboard.up(process.platform === 'linux' ? 'Control' : 'Meta')
 
     // clear selection by clicking on nothing
     await emptySpaceClick()
@@ -622,12 +808,12 @@ test('Command bar works and can change a setting', async ({ page }) => {
   const themeOption = page.getByRole('option', { name: 'Set Theme' })
   await expect(themeOption).toBeVisible()
   await themeOption.click()
-  const themeInput = page.getByPlaceholder('Select an option')
+  const themeInput = page.getByPlaceholder('system')
   await expect(themeInput).toBeVisible()
   await expect(themeInput).toBeFocused()
   // Select dark theme
   await page.keyboard.press('ArrowDown')
-  await page.keyboard.press('ArrowDown')
+  await page.keyboard.press('ArrowUp')
   await expect(page.getByRole('option', { name: Themes.Dark })).toHaveAttribute(
     'data-headlessui-state',
     'active'
@@ -748,13 +934,13 @@ test('Can add multiple sketches', async ({ page }) => {
   await page.waitForTimeout(500) // TODO detect animation ending, or disable animation
 
   const startXPx = 600
+  await u.closeDebugPanel()
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${commonPoints.startAt}, %)`)
   await page.waitForTimeout(100)
 
-  await u.closeDebugPanel()
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(100)
 
@@ -995,7 +1181,6 @@ test('Deselecting line tool should mean nothing happens on click', async ({
 }) => {
   const u = getUtils(page)
   await page.setViewportSize({ width: 1200, height: 500 })
-  const PUR = 400 / 37.5 //pixeltoUnitRatio
   await page.goto('/')
   await u.waitForAuthSkipAppStart()
   await u.openDebugPanel()
@@ -1053,3 +1238,279 @@ test('Deselecting line tool should mean nothing happens on click', async ({
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 })
+
+test('Can edit segments by dragging their handles', async ({
+  page,
+  context,
+}) => {
+  const u = getUtils(page)
+  await context.addInitScript(async () => {
+    localStorage.setItem(
+      'persistCode',
+      `const part001 = startSketchOn('-XZ')
+  |> startProfileAt([4.61, -14.01], %)
+  |> line([12.73, -0.09], %)
+  |> tangentialArcTo([24.95, -5.38], %)`
+    )
+  })
+
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await expect(
+    page.getByRole('button', { name: 'Start Sketch' })
+  ).not.toBeDisabled()
+
+  const startPX = [652, 418]
+  const lineEndPX = [794, 416]
+  const arcEndPX = [893, 318]
+
+  const dragPX = 30
+
+  await page.getByText('startProfileAt([4.61, -14.01], %)').click()
+  await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
+  await page.getByRole('button', { name: 'Edit Sketch' }).click()
+  await page.waitForTimeout(100)
+  let prevContent = await page.locator('.cm-content').innerText()
+
+  const step5 = { steps: 5 }
+
+  // drag startProfieAt handle
+  await page.mouse.move(startPX[0], startPX[1])
+  await page.mouse.down()
+  await page.mouse.move(startPX[0] + dragPX, startPX[1] - dragPX, step5)
+  await page.mouse.up()
+  await page.waitForTimeout(100)
+  await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+  prevContent = await page.locator('.cm-content').innerText()
+
+  // drag line handle
+  await page.mouse.move(lineEndPX[0] + dragPX, lineEndPX[1] - dragPX)
+  await page.mouse.down()
+  await page.mouse.move(
+    lineEndPX[0] + dragPX * 2,
+    lineEndPX[1] - dragPX * 2,
+    step5
+  )
+  await page.mouse.up()
+  await page.waitForTimeout(100)
+  await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+  prevContent = await page.locator('.cm-content').innerText()
+
+  // drag tangentialArcTo handle
+  await page.mouse.move(arcEndPX[0], arcEndPX[1])
+  await page.mouse.down()
+  await page.mouse.move(arcEndPX[0] + dragPX, arcEndPX[1] - dragPX, step5)
+  await page.mouse.up()
+  await page.waitForTimeout(100)
+  await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+
+  // expect the code to have changed
+  await expect(page.locator('.cm-content'))
+    .toHaveText(`const part001 = startSketchOn('-XZ')
+  |> startProfileAt([7.01, -11.79], %)
+  |> line([14.69, 2.73], %)
+  |> tangentialArcTo([27.6, -3.25], %)`)
+})
+
+test('Snap to close works (at any scale)', async ({ page }) => {
+  const u = getUtils(page)
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await u.openDebugPanel()
+
+  await expect(
+    page.getByRole('button', { name: 'Start Sketch' })
+  ).not.toBeDisabled()
+  await expect(page.getByRole('button', { name: 'Start Sketch' })).toBeVisible()
+
+  const doSnapAtDifferentScales = async (
+    camPos: [number, number, number],
+    expectedCode: string
+  ) => {
+    await u.clearCommandLogs()
+    await page.getByRole('button', { name: 'Start Sketch' }).click()
+    await page.waitForTimeout(100)
+
+    await u.openAndClearDebugPanel()
+    await u.updateCamPosition(camPos)
+    await u.closeDebugPanel()
+
+    // select a plane
+    await page.mouse.click(700, 200)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `const part001 = startSketchOn('XZ')`
+    )
+
+    let prevContent = await page.locator('.cm-content').innerText()
+
+    const pointA = [700, 200]
+    const pointB = [900, 200]
+    const pointC = [900, 400]
+
+    // draw three lines
+    await page.mouse.click(pointA[0], pointA[1])
+    await page.waitForTimeout(100)
+    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+    prevContent = await page.locator('.cm-content').innerText()
+
+    await page.mouse.click(pointB[0], pointB[1])
+    await page.waitForTimeout(100)
+    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+    prevContent = await page.locator('.cm-content').innerText()
+
+    await page.mouse.click(pointC[0], pointC[1])
+    await page.waitForTimeout(100)
+    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+    prevContent = await page.locator('.cm-content').innerText()
+
+    await page.mouse.move(pointA[0] - 12, pointA[1] + 12)
+    const pointNotQuiteA = [pointA[0] - 7, pointA[1] + 7]
+    await page.mouse.move(pointNotQuiteA[0], pointNotQuiteA[1], { steps: 10 })
+
+    await page.mouse.click(pointNotQuiteA[0], pointNotQuiteA[1])
+    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+    prevContent = await page.locator('.cm-content').innerText()
+
+    await expect(page.locator('.cm-content')).toHaveText(expectedCode)
+
+    // exit sketch
+    await u.openAndClearDebugPanel()
+    await page.getByRole('button', { name: 'Exit Sketch' }).click()
+    await u.expectCmdLog('[data-message-type="execution-done"]')
+    await u.removeCurrentCode()
+  }
+
+  const codeTemplate = (
+    scale = 1,
+    fudge = 0
+  ) => `const part001 = startSketchOn('XZ')
+|> startProfileAt([${roundOff(scale * 87.68)}, ${roundOff(scale * 43.84)}], %)
+|> line([${roundOff(scale * 175.36)}, 0], %)
+|> line([0, -${roundOff(scale * 175.36) + fudge}], %)
+|> close(%)`
+
+  await doSnapAtDifferentScales([0, 100, 100], codeTemplate(0.01, 0.01))
+
+  await doSnapAtDifferentScales([0, 10000, 10000], codeTemplate())
+})
+
+test('Sketch on face', async ({ page, context }) => {
+  const u = getUtils(page)
+  await context.addInitScript(async () => {
+    localStorage.setItem(
+      'persistCode',
+      `const part001 = startSketchOn('-XZ')
+  |> startProfileAt([3.29, 7.86], %)
+  |> line([2.48, 2.44], %)
+  |> line([2.66, 1.17], %)
+  |> line([3.75, 0.46], %)
+  |> line([4.99, -0.46], %)
+  |> line([3.3, -2.12], %)
+  |> line([2.16, -3.33], %)
+  |> line([0.85, -3.08], %)
+  |> line([-0.18, -3.36], %)
+  |> line([-3.86, -2.73], %)
+  |> line([-17.67, 0.85], %)
+  |> close(%)
+  |> extrude(5 + 7, %)`
+    )
+  })
+
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await expect(
+    page.getByRole('button', { name: 'Start Sketch' })
+  ).not.toBeDisabled()
+
+  await page.getByRole('button', { name: 'Start Sketch' }).click()
+
+  let previousCodeContent = await page.locator('.cm-content').innerText()
+
+  await page.mouse.click(793, 133)
+
+  const firstClickPosition = [612, 238]
+  const secondClickPosition = [661, 242]
+  const thirdClickPosition = [609, 267]
+
+  await page.waitForTimeout(300)
+
+  await page.mouse.click(firstClickPosition[0], firstClickPosition[1])
+  await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
+  previousCodeContent = await page.locator('.cm-content').innerText()
+
+  await page.mouse.click(secondClickPosition[0], secondClickPosition[1])
+  await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
+  previousCodeContent = await page.locator('.cm-content').innerText()
+
+  await page.mouse.click(thirdClickPosition[0], thirdClickPosition[1])
+  await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
+  previousCodeContent = await page.locator('.cm-content').innerText()
+
+  await page.mouse.click(firstClickPosition[0], firstClickPosition[1])
+  await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
+  previousCodeContent = await page.locator('.cm-content').innerText()
+
+  await expect(page.locator('.cm-content'))
+    .toContainText(`const part002 = startSketchOn(part001, 'seg01')
+  |> startProfileAt([1.03, 1.03], %)
+  |> line([4.18, -0.35], %)
+  |> line([-4.44, -2.13], %)
+  |> close(%)`)
+
+  await u.openAndClearDebugPanel()
+  await page.getByRole('button', { name: 'Exit Sketch' }).click()
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+
+  await u.updateCamPosition([1049, 239, 686])
+  await u.closeDebugPanel()
+
+  await page.getByText('startProfileAt([1.03, 1.03], %)').click()
+  await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
+  await page.getByRole('button', { name: 'Edit Sketch' }).click()
+  await page.waitForTimeout(200)
+
+  const pointToDragFirst = [691, 237]
+  await page.mouse.move(pointToDragFirst[0], pointToDragFirst[1])
+  await page.mouse.down()
+  await page.mouse.move(pointToDragFirst[0] - 20, pointToDragFirst[1], {
+    steps: 5,
+  })
+  await page.mouse.up()
+  await page.waitForTimeout(100)
+  await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
+  previousCodeContent = await page.locator('.cm-content').innerText()
+
+  await expect(page.locator('.cm-content'))
+    .toContainText(`const part002 = startSketchOn(part001, 'seg01')
+|> startProfileAt([1.03, 1.03], %)
+|> line([2.81, -0.33], %)
+|> line([-4.44, -2.13], %)
+|> close(%)`)
+
+  // exit sketch
+  await u.openAndClearDebugPanel()
+  await page.getByRole('button', { name: 'Exit Sketch' }).click()
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+
+  await page.getByText('startProfileAt([1.03, 1.03], %)').click()
+
+  await expect(page.getByRole('button', { name: 'Extrude' })).not.toBeDisabled()
+  await page.getByRole('button', { name: 'Extrude' }).click()
+
+  await expect(page.getByTestId('command-bar')).toBeVisible()
+
+  await page.keyboard.press('Enter')
+  await expect(page.getByText('Confirm Extrude')).toBeVisible()
+  await page.keyboard.press('Enter')
+
+  await expect(page.locator('.cm-content'))
+    .toContainText(`const part002 = startSketchOn(part001, 'seg01')
+|> startProfileAt([1.03, 1.03], %)
+|> line([2.81, -0.33], %)
+|> line([-4.44, -2.13], %)
+|> close(%)
+|> extrude(5 + 7, %)`)
+})