Bump chrono from 0.4.35 to 0.4.37 in /src/wasm-lib (#1948)

Bumps [chrono](https://github.com/chronotope/chrono) from 0.4.35 to 0.4.37.
- [Release notes](https://github.com/chronotope/chrono/releases)
- [Changelog](https://github.com/chronotope/chrono/blob/main/CHANGELOG.md)
- [Commits](https://github.com/chronotope/chrono/compare/v0.4.35...v0.4.37)

---
updated-dependencies:
- dependency-name: chrono
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

.codespellrc

@@ -1,3 +1,3 @@
 [codespell]
 ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,absolutey
-skip: **/target,node_modules,build,**/Cargo.lock
+skip: **/target,node_modules,build,**/Cargo.lock,./docs/kcl/*.md

docs/kcl/abs.md

@@ -12,6 +12,10 @@ Computes the absolute value of a number.
 abs(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/acos.md

@@ -12,6 +12,10 @@ Computes the arccosine of a number (in radians).
 acos(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/asin.md

@@ -12,6 +12,10 @@ Computes the arcsine of a number (in radians).
 asin(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/atan.md

@@ -12,6 +12,10 @@ Computes the arctangent of a number (in radians).
 atan(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/ceil.md

@@ -12,6 +12,10 @@ Computes the smallest integer greater than or equal to a number.
 ceil(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/cos.md

@@ -1,10 +1,10 @@
 ---
 title: "cos"
-excerpt: "Computes the sine of a number (in radians)."
+excerpt: "Computes the cosine of a number (in radians)."
 layout: manual
 ---
 
-Computes the sine of a number (in radians).
+Computes the cosine of a number (in radians).
 
 
 
@@ -12,6 +12,10 @@ Computes the sine of a number (in radians).
 cos(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/e.md

@@ -12,6 +12,10 @@ Return the value of Euler’s number `e`.
 e() -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/floor.md

@@ -12,6 +12,10 @@ Computes the largest integer less than or equal to a number.
 floor(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/index.md

@@ -30,10 +30,12 @@ layout: manual
 * [`extrude`](kcl/extrude)
 * [`fillet`](kcl/fillet)
 * [`floor`](kcl/floor)
+* [`getEdge`](kcl/getEdge)
 * [`getExtrudeWallTransform`](kcl/getExtrudeWallTransform)
 * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
 * [`getOppositeEdge`](kcl/getOppositeEdge)
 * [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
+* [`helix`](kcl/helix)
 * [`hole`](kcl/hole)
 * [`import`](kcl/import)
 * [`lastSegX`](kcl/lastSegX)
@@ -55,6 +57,7 @@ layout: manual
 * [`patternLinear3d`](kcl/patternLinear3d)
 * [`pi`](kcl/pi)
 * [`pow`](kcl/pow)
+* [`revolve`](kcl/revolve)
 * [`segAng`](kcl/segAng)
 * [`segEndX`](kcl/segEndX)
 * [`segEndY`](kcl/segEndY)

docs/kcl/legAngX.md

@@ -12,6 +12,10 @@ Returns the angle of the given leg for x.
 legAngX(hypotenuse: number, leg: number) -> number
 ```
 
+### Tags
+
+* `utilities`
+
 ### Examples
 
 ```js

docs/kcl/legAngY.md

@@ -12,6 +12,10 @@ Returns the angle of the given leg for y.
 legAngY(hypotenuse: number, leg: number) -> number
 ```
 
+### Tags
+
+* `utilities`
+
 ### Examples
 
 ```js

docs/kcl/legLen.md

@@ -12,6 +12,10 @@ Returns the length of the given leg.
 legLen(hypotenuse: number, leg: number) -> number
 ```
 
+### Tags
+
+* `utilities`
+
 ### Examples
 
 ```js

docs/kcl/ln.md

@@ -12,6 +12,10 @@ Computes the natural logarithm of the number.
 ln(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/log.md

@@ -12,6 +12,10 @@ The result might not be correctly rounded owing to implementation details; `log2
 log(num: number, base: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/log10.md

@@ -12,6 +12,10 @@ Computes the base 10 logarithm of the number.
 log10(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/log2.md

@@ -12,6 +12,10 @@ Computes the base 2 logarithm of the number.
 log2(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/max.md

@@ -12,6 +12,10 @@ Computes the maximum of the given arguments.
 max(args: [number]) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/min.md

@@ -12,6 +12,10 @@ Computes the minimum of the given arguments.
 min(args: [number]) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/pi.md

@@ -12,6 +12,10 @@ Return the value of `pi`. Archimedes’ constant (π).
 pi() -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/pow.md

@@ -12,6 +12,10 @@ Computes the number to a power.
 pow(num: number, pow: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/sin.md

@@ -12,6 +12,10 @@ Computes the sine of a number (in radians).
 sin(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/sqrt.md

@@ -12,6 +12,10 @@ Computes the square root of a number.
 sqrt(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/tan.md

@@ -12,6 +12,10 @@ Computes the tangent of a number (in radians).
 tan(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/tau.md

@@ -12,6 +12,10 @@ Return the value of `tau`. The full circle constant (τ). Equal to 2π.
 tau() -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/toDegrees.md

@@ -12,6 +12,10 @@ Converts a number from radians to degrees.
 toDegrees(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

docs/kcl/toRadians.md

@@ -12,6 +12,10 @@ Converts a number from degrees to radians.
 toRadians(num: number) -> number
 ```
 
+### Tags
+
+* `math`
+
 ### Examples
 
 ```js

make-release.sh

@@ -67,3 +67,12 @@ echo "Versions has been bumped in relevant json files, a branch has been created
 echo ""
 echo "What's left for you to do is, push the branch and make the release PR."
 echo ""
+
+echo "Suggested changelog:"
+echo "\`\`\`"
+echo "## What's Changed"
+git log $(git describe --tags --abbrev=0)..HEAD --oneline --pretty=format:%s | grep -v Bump | grep -v 'Cut release v' | awk '{print "* "toupper(substr($0,0,1))substr($0,2)}'
+echo ""
+echo "**Full Changelog**: https://github.com/KittyCAD/modeling-app/compare/${latest_tag}...${new_version}"
+echo "\`\`\`"
+echo "and would recommend removing ones that aren't related to the product (eg. CI changes)"

package.json

@@ -10,7 +10,7 @@
     "@fortawesome/react-fontawesome": "^0.2.0",
     "@headlessui/react": "^1.7.18",
     "@headlessui/tailwindcss": "^0.2.0",
-    "@kittycad/lib": "^0.1.0",
+    "@kittycad/lib": "^0.0.56",
     "@lezer/javascript": "^1.4.9",
     "@open-rpc/client-js": "^1.8.1",
     "@react-hook/resize-observer": "^1.2.6",
@@ -22,7 +22,7 @@
     "@ts-stack/markdown": "^1.5.0",
     "@tweenjs/tween.js": "^23.1.1",
     "@types/node": "^18.19.26",
-    "@types/react": "^18.2.67",
+    "@types/react": "^18.2.73",
     "@types/react-dom": "^18.2.22",
     "@uiw/react-codemirror": "^4.21.24",
     "@xstate/inspect": "^0.8.0",

src-tauri/Cargo.lock

@@ -1664,9 +1664,9 @@ dependencies = [
 
 [[package]]
 name = "kittycad"
-version = "0.2.61"
+version = "0.2.63"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "949555aa013e1cefa68f59671cfe96602a459c903376c53a410aebf3831d291f"
+checksum = "93a332250e08fd715ad3d5826e04d36da1c5bb42d0c1b1ff1f0598278b9ebf3c"
 dependencies = [
  "anyhow",
  "async-trait",
@@ -3276,9 +3276,9 @@ dependencies = [
 
 [[package]]
 name = "serde_json"
-version = "1.0.114"
+version = "1.0.115"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c5f09b1bd632ef549eaa9f60a1f8de742bdbc698e6cee2095fc84dde5f549ae0"
+checksum = "12dc5c46daa8e9fdf4f5e71b6cf9a53f2487da0e86e55808e2d35539666497dd"
 dependencies = [
  "indexmap 2.2.5",
  "itoa 1.0.6",
@@ -3876,7 +3876,7 @@ dependencies = [
 [[package]]
 name = "tauri-plugin-fs-extra"
 version = "0.0.0"
-source = "git+https://github.com/tauri-apps/plugins-workspace?branch=v1#8cd4a39864986ae3600be9f23d089afd3988c43a"
+source = "git+https://github.com/tauri-apps/plugins-workspace?branch=v1#c6a5b7ae479eaa598db2430a87fe32a3429198bf"
 dependencies = [
  "log",
  "serde",

src-tauri/Cargo.toml

@@ -16,7 +16,7 @@ tauri-build = { version = "1.5.1", features = [] }
 
 [dependencies]
 anyhow = "1"
-kittycad = "0.2.61"
+kittycad = "0.2.63"
 oauth2 = "4.4.2"
 serde = { version = "1.0", features = ["derive"] }
 serde_json = "1.0"

src/components/ModelingMachineProvider.tsx

@@ -242,7 +242,6 @@ export const ModelingMachineProvider = ({
           }
 
           exportFromEngine({
-            source_unit: baseUnit,
             format: format as Models['OutputFormat_type'],
           }).catch((e) => toast.error('Error while exporting', e)) // TODO I think we need to throw the error from engineCommandManager
         },

src/lang/KclSingleton.ts

@@ -428,17 +428,15 @@ export class KclManager {
     return this?.engineCommandManager?.defaultPlanes
   }
 
-  getPlaneId(axis: 'xy' | 'xz' | 'yz'): string {
-    return this.defaultPlanes[axis]
-  }
-
   showPlanes() {
+    if (!this.defaultPlanes) return
     void this.engineCommandManager.setPlaneHidden(this.defaultPlanes.xy, false)
     void this.engineCommandManager.setPlaneHidden(this.defaultPlanes.yz, false)
     void this.engineCommandManager.setPlaneHidden(this.defaultPlanes.xz, false)
   }
 
   hidePlanes() {
+    if (!this.defaultPlanes) return
     void this.engineCommandManager.setPlaneHidden(this.defaultPlanes.xy, true)
     void this.engineCommandManager.setPlaneHidden(this.defaultPlanes.yz, true)
     void this.engineCommandManager.setPlaneHidden(this.defaultPlanes.xz, true)
@@ -464,11 +462,23 @@ function enterEditMode(
   ) as SketchGroup | ExtrudeGroup
   firstSketchOrExtrudeGroup &&
     engineCommandManager.sendSceneCommand({
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: {
-        type: 'edit_mode_enter',
-        target: firstSketchOrExtrudeGroup.id,
-      },
+      type: 'modeling_cmd_batch_req',
+      batch_id: uuidv4(),
+      requests: [
+        {
+          cmd_id: uuidv4(),
+          cmd: {
+            type: 'edit_mode_enter',
+            target: firstSketchOrExtrudeGroup.id,
+          },
+        },
+        {
+          cmd_id: uuidv4(),
+          cmd: {
+            type: 'set_selection_filter',
+            filter: ['face', 'edge', 'solid2d'],
+          },
+        },
+      ],
     })
 }

src/lang/std/engineConnection.ts

@@ -843,11 +843,7 @@ export class EngineCommandManager {
   outSequence = 1
   inSequence = 1
   engineConnection?: EngineConnection
-  defaultPlanes: { xy: string; yz: string; xz: string } = {
-    xy: '',
-    yz: '',
-    xz: '',
-  }
+  defaultPlanes: { xy: string; yz: string; xz: string } | null = null
   _commandLogs: CommandLog[] = []
   _commandLogCallBack: (command: CommandLog[]) => void = () => {}
   // Folks should realize that wait for ready does not get called _everytime_
@@ -1245,6 +1241,7 @@ export class EngineCommandManager {
   startNewSession() {
     this.lastArtifactMap = this.artifactMap
     this.artifactMap = {}
+    this.initPlanes()
   }
   subscribeTo<T extends ModelTypes>({
     event,
@@ -1289,40 +1286,15 @@ export class EngineCommandManager {
     this.callbacksEngineStateConnection.push(callback)
   }
   endSession() {
-    // TODO: instead of sending a single command with `object_ids: Object.keys(this.artifactMap)`
-    // we need to loop over them each individually because if the engine doesn't recognise a single
-    // id the whole command fails.
-    const artifactsToDelete: any = {}
-    Object.entries(this.artifactMap).forEach(([id, artifact]) => {
-      const artifactTypesToDelete: ArtifactMap[string]['commandType'][] = [
-        // 'start_path' creates a new scene object for the path, which is why it needs to be deleted,
-        // however all of the segments in the path are its children so there don't need to be deleted.
-        // this fact is very opaque in the api and docs (as to what should can be deleted).
-        // Using an array is the list is likely to grow.
-        'start_path',
-        'entity_linear_pattern',
-        'entity_circular_pattern',
-      ]
-      if (artifactTypesToDelete.includes(artifact.commandType)) {
-        artifactsToDelete[id] = artifact
-      }
-      if (artifact.commandType === 'import_files') {
-        // TODO why is this handled differently from other artifacts, i.e. why does it not use the id from the
-        // modeling command? We're having to do special clean up for this one special object.
-        artifactsToDelete[(artifact as any)?.data?.data?.object_id] = artifact
-      }
-    })
-    Object.keys(artifactsToDelete).forEach((id) => {
-      const deleteCmd: EngineCommand = {
-        type: 'modeling_cmd_req',
-        cmd_id: uuidv4(),
-        cmd: {
-          type: 'remove_scene_objects',
-          object_ids: [id],
-        },
-      }
-      this.engineConnection?.send(deleteCmd)
-    })
+    const deleteCmd: EngineCommand = {
+      type: 'modeling_cmd_req',
+      cmd_id: uuidv4(),
+      cmd: {
+        type: 'scene_clear_all',
+      },
+    }
+    this.defaultPlanes = null
+    this.engineConnection?.send(deleteCmd)
   }
   addCommandLog(message: CommandLog) {
     if (this._commandLogs.length > 500) {
@@ -1629,6 +1601,7 @@ export class EngineCommandManager {
     }
   }
   private async initPlanes() {
+    if (this.planesInitialized()) return
     const [xy, yz, xz] = [
       await this.createPlane({
         x_axis: { x: 1, y: 0, z: 0 },
@@ -1652,20 +1625,14 @@ export class EngineCommandManager {
       event: 'select_with_point',
       callback: ({ data }) => {
         if (!data?.entity_id) return
-        if (
-          ![
-            this.defaultPlanes.xy,
-            this.defaultPlanes.yz,
-            this.defaultPlanes.xz,
-          ].includes(data.entity_id)
-        )
-          return
+        if (![xy, yz, xz].includes(data.entity_id)) return
         this.onPlaneSelectCallback(data.entity_id)
       },
     })
   }
   planesInitialized(): boolean {
     return (
+      !!this.defaultPlanes &&
       this.defaultPlanes.xy !== '' &&
       this.defaultPlanes.yz !== '' &&
       this.defaultPlanes.xz !== ''

src/lang/wasm.ts

@@ -127,13 +127,15 @@ export interface ProgramMemory {
 export const executor = async (
   node: Program,
   programMemory: ProgramMemory = { root: {}, return: null },
-  engineCommandManager: EngineCommandManager
+  engineCommandManager: EngineCommandManager,
+  isMock: boolean = false
 ): Promise<ProgramMemory> => {
   engineCommandManager.startNewSession()
   const _programMemory = await _executor(
     node,
     programMemory,
-    engineCommandManager
+    engineCommandManager,
+    isMock
   )
   await engineCommandManager.waitForAllCommands()
 
@@ -148,7 +150,8 @@ const getSettingsState = import('components/SettingsAuthProvider').then(
 export const _executor = async (
   node: Program,
   programMemory: ProgramMemory = { root: {}, return: null },
-  engineCommandManager: EngineCommandManager
+  engineCommandManager: EngineCommandManager,
+  isMock: boolean
 ): Promise<ProgramMemory> => {
   try {
     const baseUnit = (await getSettingsState)()?.baseUnit || 'mm'
@@ -157,7 +160,8 @@ export const _executor = async (
       JSON.stringify(programMemory),
       baseUnit,
       engineCommandManager,
-      fileSystemManager
+      fileSystemManager,
+      isMock
     )
     return memory
   } catch (e: any) {

src/lib/exportFromEngine.ts

@@ -5,10 +5,8 @@ import { v4 as uuidv4 } from 'uuid'
 // Isolating a function to call the engine to export the current scene.
 // Because it has given us trouble in automated testing environments.
 export function exportFromEngine({
-  source_unit,
   format,
 }: {
-  source_unit: Models['UnitLength_type']
   format: Models['OutputFormat_type']
 }) {
   return engineCommandManager.sendSceneCommand({
@@ -20,7 +18,6 @@ export function exportFromEngine({
       // in the scene to export. In that case, you'd pass the IDs thru here.
       entity_ids: [],
       format,
-      source_unit,
     },
     cmd_id: uuidv4(),
   })

src/lib/testHelpers.ts

@@ -66,7 +66,7 @@ export async function enginelessExecutor(
   }) as any as EngineCommandManager
   await mockEngineCommandManager.waitForReady
   mockEngineCommandManager.startNewSession()
-  const programMemory = await _executor(ast, pm, mockEngineCommandManager)
+  const programMemory = await _executor(ast, pm, mockEngineCommandManager, true)
   await mockEngineCommandManager.waitForAllCommands()
   return programMemory
 }
@@ -86,7 +86,7 @@ export async function executor(
   })
   await engineCommandManager.waitForReady
   engineCommandManager.startNewSession()
-  const programMemory = await _executor(ast, pm, engineCommandManager)
+  const programMemory = await _executor(ast, pm, engineCommandManager, false)
   await engineCommandManager.waitForAllCommands()
   return programMemory
 }

src/machines/modelingMachine.ts

@@ -2,7 +2,12 @@ import { PathToNode, VariableDeclarator } from 'lang/wasm'
 import { Axis, Selection, Selections } from 'lib/selections'
 import { assign, createMachine } from 'xstate'
 import { getNodePathFromSourceRange } from 'lang/queryAst'
-import { kclManager, sceneInfra, sceneEntitiesManager } from 'lib/singletons'
+import {
+  kclManager,
+  sceneInfra,
+  sceneEntitiesManager,
+  engineCommandManager,
+} from 'lib/singletons'
 import {
   horzVertInfo,
   applyConstraintHorzVert,
@@ -37,6 +42,7 @@ import { ModelingCommandSchema } from 'lib/commandBarConfigs/modelingCommandConf
 import { DefaultPlaneStr } from 'clientSideScene/sceneEntities'
 import { Vector3 } from 'three'
 import { quaternionFromUpNForward } from 'clientSideScene/helpers'
+import { v4 as uuidv4 } from 'uuid'
 
 export const MODELING_PERSIST_KEY = 'MODELING_PERSIST_KEY'
 
@@ -127,7 +133,7 @@ export type MoveDesc = { line: number; snippet: string }
 
 export const modelingMachine = createMachine(
   {
-    /** @xstate-layout N4IgpgJg5mDOIC5QFkD2EwBsCWA7KAxAMICGuAxlgNoAMAuoqAA6qzYAu2qujIAHogC0AdgCsAZgB04gEyjhADnEA2GgoUAWJQBoQAT0QBGGuICckmoZkbTM42YWKAvk91oMOfAQDKYdgAJYLDByTm5aBiQQFjYwniiBBFtpGhlxDRphGg1ZURlhXQMEcRLDSVF5UwV84XEK8Rc3dCw8KElsCEwwHz9A4NCuXAjeGI5B3kTBLWFJDWV5hVSZZTrlBUKjS1FZiUrDeWVDasaQdxb8ds7ugFFcdjAAJ0CAaz9yAAthqNG4iaFlmZWZSmZRaKyGQzKYQaDYIGSmDSzdKyDSGcQ0KrAk5nTxtDpdAi3e5PWCvdgfKiGSLMVhjbh-BCCaw0WaQrZqdGLAr6RAZGSSWzCZSiIEKNFi5TY5q4y4E658dgPACuGC+NNi4wSQgqM3hNFEwNEGlEYthENELJkCjWplMFpsGlRUo8rVlNz4LAe7DV0Vpvy1jKtCkkVuZMjsDpNsOEwjKUIkcxNqWhomd5za3jJH2IZEomEzb0+9BGfs1oESEOtkmM0K0ahMplkZqOZUrYrRlgUJrTMoL5Pekj7HwAklcegEgl0BuFi99S-SA4ZoWUdWsTSLlsozZlzNkZPrG0a5F2e66hwPz6OCcgSK8+lAALZgO7+ABuj045BImB9PzL-CMeFW2qTQhU0ZMzVRKR0RoVJ6nyJQNFPC5z0HLN3ivbobzvIJH2fAJ3lQB5sAAL24dhv1-ed4nLQDoUkVRrX1CF8ihGQzXECFymNLJIU4-U8mQjN0LQwtMOIbhYEVEg8H8QjiLIu5v38CBsCk3MwCojUF1ohArCNCwNDSDFENMI51h5OEzGUCwKgtbJRDMtEhNE-tXJHMciEk6TZPfL1sC-TAVLUiiKE02d1TpGiAL05ZgztK0RVBYxNHYyzw1qcprCODQY2EZYjRc1DL087yHhk3B-AAQQAIW8fwAA0tKihkrC7JExEMGxOPhNJYXhAy7ShRY4NMWoGlcU5pTPESSoJLzcCk8rZNq+qAE1mv9XS2u2aw7GUOR9mFA7YU5YN8rstlHEdIrZvQ8SFqWir-DIKAuk2-8K2RaQlBA+QxWEUx+otXV1zyg1AbG27C3cjDSsWnzKq6fB2CLalfW06KvvEGYVANDE0TSfZ+sOc7gVRQHHSUKFobcubukexH-CYR4WdwVTyCVTASCeVT1LCj6dJiqwrVmW0eoyI5VC3dKxURWMqjG-LHVy1NJpxGaYfpiSEeWyr5NI8jv0wPQXpwKAhgijGWsXZZ+S7TQu3SI0aBWM0kpDO1QPysQVgmpoXRQu6xPhp7fI-ALjdN79sAtwWsbo8wcitQGkrMEUzQO7YTTGzFqiqWpaY+WGHrK57YFwEgmH8dhUEa+PWs4qRlnERYFDG6ozH6vcQzkeZ5n1RxwyLi97tDpmK6rmu642q2-yFr60QsIVOJjHHjBhdKupmI0h8cpc5hyEeS-HvX-DAABHJVlORqBUYb23G3KbfAayPIJG5Iol3RJETFg-VjqmGPtrRmZ8mA82NtQOe1FG75AsOGFY+xGwU03l-RsMwTCcUOLaTIag1YB3TLDE+80y6yQeGAB8qB3z+HIKQu4sAH7bWsMGQ41gDRWlRCacQZolBlEsMCfcOROQHWAWPAkAAlMAggwB8BCEqe4jDhZ1CkGiVQ+kdQGlhCCGyjk14misGZbIoiQ5yivtgauAAZPAYBp6oB-NAzGrV246JKKCW0CZ1CwiUNnTIe05CJghMY-s4lrhmOrqFGAdxsDKR5uQaeijEj7WDK3A0WD-rKObJYSQYFVDpMdKCY+VUADuMkCJEUNkpIKfNQqUH8HgAAZqgAgEBuBgHaLgV8qBXiSBgOwQQBtFIUUwIIBpqAEmIGMoifJGQxpmCVtw9KqJzBdlDFg2wENCklI4HJcpgzlLVI0nU3AjSCCPAeERSQTBubsEaQ8B8PS-D9N2UbYZozxlWX1NWLqqI0TGitGNfqrd+TZFdrBOorFDCbNKW+COgVgr81qaM5prT2mdO6b0wQflPzfhGccsZDiba6SJvyNEih7BQkMIKfqVopCOHfnYUo+UoXbKxZHKpIVDlIrORcq5JAblEXuRi1lgVcWNPecSyQix5D7zEJoalRlqzHVSK3ECShmUBFWo1I5JyWm4DaXgNFbSMUkAAEawEEHwUV+L0bzwTlZSE2SDqwXDLsCyRR4QHWrBkVEoJZAHULuraaQcYbFOhZqhq2qmncoeJc65tzBWPNNeay1byCVbRikTGYQj1B1FMPqLQ-UzI2TqNaCQG9oRAMDYHYSIatkarqv4NakbkV6tRV0o1iazWCD0Fa8VWDpAaMcvCHGxpTquyzYrC0XD83quqg2ptXKHjnJjby-ldyHl9KTd23tabPoTNXvAle+V5jpEhKdSEiJXbaJdaSmQs7XpdGbbq-VHT20bsEA+qRqabUwIDJmlIEJwWOTtIYYGBoBTogtOaE0UJhD3vwI+xdy7Y18vje+z9O6f2OL-Zxc62Q2pWDUGZT+EyRSAjRPIOC+oASztvqjJ9KKDVvoxXR94mGSzYaJZxbYyczAoP3PkEm7VXaMpUEuKwtHnx33eM26NKG10Jr6ax9jc5OMZv7cYEw+i1i5TSu60E-J5jMIRGIGMBpZ0sweGzDmXMebwpqTYpFz623oseZZ6zAVbMPEEAcsKKnIrpsSXbAUXDrAHTinIfq1RtjrzmMKdxch-ZTWrUQ0N2z3PPhs9zXmHKwqyaXTyuNAr30ZfZp57LPncuUH89bQLEzgtexROFtYkX0p5WkLGOLwH35JY1sGtyVi9W2MwOOPoU44jiv3EnQjRxMhHDyAs91Y1qxewxMwxid6q2ENQoNmxtc7GEjCTXV6+FolBVifE3dC8JkxkRPsMwsF1CKxlkUJWSIcaOCyCCY+u3huSGHLgDgBBJsqElSk2bCI5BA0smsMoaR24PZxoDNIP3rF-YB0DykWHCUZvyPyC0VoL2EeBNGQGswVgSHWcCWC+DkvbZEr9-bmBJC4AFd+Ubk4QgTau3a6wmVZDqClsyA0L3ECghmMuVWcsoKQq272BnaOmeSAAHJ1wAAqoDwOwWABAqoQAgIECiXpmaa7uOK+YiI80GkckZRYoJYTzCTmYV+mQc0KFR0NpXqv-Aa61zr0gYV7HY7q3pTQu5ZBAoxFoE0brEC8TFtg0oVoVjHwx+wYHPPWr8NmF2LIKhqNR7NGkKQcwhTLFBcsJ0cvNZuTT8DqkHGccVmYpKvNea5iyFgl1IvZlslOzmECbqkpq-9eLgAFRO1EmJDw4m1w5-0bnwe91wgOuYYESg7TolsPCIvqJJUXv3JYY03YR81rchP-Ap3p+z6aaEpU5j-CM9QHY83jpf6KEchaE6lkEQ2RjOGOoLIV2UvY+JUdmOudSL0c8AAeVwBbRfUNUkCqm8DH0EDAJaUEEgPYBgMtiX2uz0hKGDDyFqCckdDqDUFhCTAFGwTUFylbhKDg1P1hn8FZ38HqRIEoB6HGxUjAHYK5gCF5T1XeSZC4iOARCRy0ChBsFEAd2WH3zSByEhiFBsBHhYLrnYM4N8AnAX0GHeSFC+R0wkDmWyEOFhAdAgxKDsCUAGhXhcjIGwAfD5VaGnmZm5j1XgJczaXsMcPuEEFrkEA0PCjwLtQqGAldxBSWEyFkOSSsBKFSHbmhHUDsMBx8OcNrlcLIG6C0LGy510Mzz-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-xBAtHAhsD9n6jJWyXrP3h1G+xbJhifzsV7MSXsGXkIKNHDLWEoNUBDFREkJKP0g9z22f2ZzT0XImX2D4XGi7BsHUA3Jh2SEhBWHyQezmGBLp3lznMVyPJZzZ0wFPLhBsCzTXj1EWFkEmIQHjxHMpST2tFkAPL+29193oT-LYWbl4TBBMDSDdksjLxDHbDRCOGULFFT0B3YD-OMEcgYmNCMnLI3270skrFbHMkA07BPzFNpIHAv0iU4Gv2nmQq+OyWPRUESkhm3DyBDDWAWEow3Fpw2KIXQIgKN2wPQlgLIptD+N3lSVC1tMQCNBsgH1sGP2GnM1nP7DULYI4MeIVO2OLwYhNAEyMgMz5MsjoJDHYRBBqBWDRKYJ6M4CaPSMEMsu9PwL4gFCFHb0ROJ1kJshMHUCFF3k5EYLYskB8rSLrhaKkjaPQjIuW19mFCyAjE4lsCixZAHlLOZGtCtBcBcCAA */
+    /** @xstate-layout N4IgpgJg5mDOIC5QFkD2EwBsCWA7KAxAMICGuAxlgNoAMAuoqAA6qzYAu2qujIAHogC0AdgCsAZgB04gEyjhADnEA2GgoUAWJQBoQAT0QBGGuICckmoZkbTM42YWKAvk91oMOfAQDKYdgAJYLDByTm5aBiQQFjYwniiBBFtpGhlxDRphGg1ZURlhXQMEcRLDSVF5UwV84XEK8Rc3dCw8KElsCEwwHz9A4NCuXAjeGI5B3kTBLWFJDWV5hVSZZTrlBUKjS1FZiUrDeWVDasaQdxb8ds7ugFFcdjAAJ0CAaz9yAAthqNG4iaFlmZWZSmZRaKyGQzKYQaDYIGSmDSzdKyDSGcQ0KrAk5nTxtDpdAi3e5PWCvdgfKiGSLMVhjbh-BCCaw0WaQrZqdGLAr6RAZGSSWzCZSiIEKNFi5TY5q4y4E658dgPACuGC+NNi4wSQgqM3hNFEwNEGlEYthENELJkCjWplMFpsGlRUo8rVlNz4LAe7DV0Vpvy1jKtCkkVuZMjsDpNsOEwjKUIkcxNqWhomd5za3jJH2IZEomEzb0+9BGfs1oESEOtkmM0K0ahMplkZqOZUrYrRlgUJrTMoL5Pekj7HwAklcegEgl0BuFi99S-SA4ZoWUdWsTSLlsozZlzNkZPrG0a5F2e66hwPz6OCcgSK8+lAALZgO7+ABuj045BImB9PzL-CMeFW2qTQhU0ZMzVRKR0RoVJ6nyJQNFPC5z0HLN3ivbobzvIJH2fAJ3lQB5sAAL24dhv1-ed4nLQDoUkVRrX1CF8ihGQzXECFymNLJIU4-U8mQjN0LQwtMOIbhYEVEg8H8QjiLIu5v38CBsCk3MwCojUF1ohArCNCwNDSDFENMI51h5OEzGUCwKgtbJRDMtEhNE-tXJHMciEk6TZPfL1sC-TAVLUiiKE02d1TpGiAL05ZgztK0RVBYxNHYyzw1qcprCODQY2EZYjRc1DL087yHhk3B-AAQQAIW8fwAA0tKihkrC7JExEMGxOPhNJYXhAy7ShRY4NMWoGlcU5pTPESSoJLzcCk8rZNq+qAE1mv9XS2u2aw7GUOR9mFA7YU5YN8rstlHEdIrZvQ8SFqWir-DIKAuk2-8K2RaQlBA+QxWEUx+otXV1zyg1AbG27C3cjDSsWnzKq6fB2CLalfW06KvvEGYVANDE0TSfZ+sOc7gVRQHHSUKFobcubukexH-CYR4WdwVTyCVTASCeVT1LCj6dJiqwrVmW0eoyI5VC3dKxURWMqjG-LHVy1NJpxGaYfpiSEeWyr5NI8jv0wPQXpwKAhgijGWsXZZ+S7TQu3SI0aBWM0kpDO1QPysQVgmpoXRQu6xPhp7fI-ALjdN79sAtwWsbo8wcitQGkrMEUzQO7YTTGzFqiqWpaY+WGHrK57YFwEgmH8dhUEa+PWs4qRlnERYFDG6ozH6vcQzkeZ5n1RxwyLi97tDpmK6rmu642q2-yFr60QsIVOJjHHjBhdKupmI0h8cpc5hyEeS-HvX-DAABHJVlORqBUYb23G3KbfAayPIJG5Iol3RJETFg-VjqmGPtrRmZ8mA82NtQOe1FG75AsOGFY+xGwU03l-RsMwTCcUOLaTIag1YB3TLDE+80y6yQeGAB8qB3z+HIKQu4sAH7bWsMGQ41gDRWlRCacQZolBlEsMCfcOROQHWAWPAkAAlMAggwB8BCEqe4jDhZ1CkGiVQ+kdQGlhCCGyjk14misGZbIoiQ5yivtgauAAZPAYBp6oB-NAzGrV246JKKCW0CZ1CwiUNnTIe05CJghMY-s4lrhmOrqFGAdxsDKR5uQaeijEj7WDK3A0WD-rKObJYSQYFVDpMdKCY+VUADuMkCJEUNkpIKfNQqUH8HgAAZqgAgEBuBgHaLgV8qBXiSBgOwQQBtFIUUwIIBpqAEmIGMoifJGQxpmCVtw9KqJzBdlDFg2wENCklI4HJcpgzlLVI0nU3AjSCCPAeERSQTBubsEaQ8B8PS-D9N2UbYZozxlWX1NWLqqI0TGitGNfqrd+TZFdrBOorFDCbNKW+COgVgr81qaM5prT2mdO6b0wQflPzfhGccsZDiba6SJvyNEih7BQkMIKfqVopCOHfnYUo+UoXbKxZHKpIVDlIrORcq5JAblEXuRi1lgVcWNPecSyQix5D7zEJoalRlqzHVSK3ECShmUBFWo1I5JyWm4DaXgNFbSMUkAAEawEEHwUV+L0bzwTlZSE2SDqwXDLsCyRR4QHWrBkVEoJZAHULuraaQcYbFOhZqhq2qmncoeJc65tzBWPNNeay1byCVbRikTGYQj1B1FMPqLQ-UzI2TqNaCQG9oRAMDYHYSIatkarqv4NakbkV6tRV0o1iazWCD0Fa8VWDpAaMcvCHGxpTquyzYrC0XD83quqg2ptXKHjnJjby-ldyHl9KTd23tabPoTNXvAle+V5jpEhKdSEiJXbaJdaSmQs7XpdGbbq-VHT20bsEA+qRqabUwIDJmlIEJwWOTtIYYGBoBTogtOaE0UJhD3vwI+xdy7Y18vje+z9O6f2OL-Zxc62Q2pWDUGZT+EyRSAjRPIOC+oASztvqjJ9KKDVvoxXR94mGSzYaJZxbYyczAoP3PkEm7VXaMpUEuKwtHnx33eM26NKG10Jr6ax9jc5OMZv7cYEw+i1i5TSu60E-J5jMIRGIGMBpZ0sweGzDmXMebwpqTYpFz623oseZZ6zAVbMPEEAcsKKnIrpsSXbAUXDrAHTinIfq1RtjrzmMKdxch-ZTWrUQ0N2z3PPhs9zXmHKwqyaXTyuNAr30ZfZp57LPncuUH89bQLEzgtexROFtYkX0p5WkLGOLwH35JY1sGtyVi9W2MwOOPoU44jiv3EnQjRxMhHDyAs91Y1qxewxMwxid6q2ENQoNmxtc7GEjCTXV6+FolBVifE3dC8JkxkRPsMwsF1CKxlkUJWSIcaOCyCCY+u3huSGHLgDgBBJsqElSk2bCI5BA0smsMoaR24PZxoDNIP3rF-YB0DykWHCUZvyPyC0VoL2EeBNGQGswVgSHWcCWC+DkvbZEr9-bmBJC4AFd+Ubk4QgTau3a6wmVZDqClsyA0L3ECghmMuVWcsoKQq272BnaOmeSAAHJ1wAAqoDwOwWABAqoQAgIECiXpmaa7uOK+YiI80GkckZRYoJYTzCTmYV+mQc0KFR0NpXqv-Aa61zr0gYV7HY7q3pTQu5ZBAoxFoE0brEC8TFtg0oVoVjHwx+wYHPPWr8NmF2LIKhqNR7NGkKQcwhTLFBcsJ0cvNZuTT8DqkHGccVmYpKvNea5iyFgl1IvZlslOzmECbqkpq-9eLgAFRO1EmJDw4m1w5-0bnwe91wgOuYYESg7TolsPCIvqJJUXv3JYY03YR81rchP-Ap3p+z6aaEpU5j-CM9QHY83jpf6KEchaE6lkEQ2RjOGOoLIV2UvY+JUdmOudSL0c8AAeVwBbRfUNUkCqm8DH0EDAJaUEEgPYBgMtiX2uz0hKGDDyFqCckdDqDUFhCTAFGwTUFylbhKDg1P1hn8FZ38HqRIEoB6HGxUjAHYK5gCF5T1XeSZC4iOARCRy0ChBsFEAd2WH3zSByEhiFBsBHhYLrnYM4N8AnAX0GHeSFC+R0wkDmWyEOFhAdAgxKDsCUAGhXhcjIGwAfD5VaGnmZm5j1XgJczaXsMcPuEEFrkEA0PCjwLtQqGAldxBSWEyFkOSSsBKFSHbmhHUDsMBx8OcNrlcLIG6C0LGy510Mzz-Xyi+TkCh0YmhEoK0GrFWDsFghWBqGSIcKcPwBcJkRCmcNJELA8KY26W8L5SkX8PaP7HeSzngX9SqH2EUL00QFwwYihFbhBCe1yndxOFZwwHgCiD6ygEbxD0EEWDKFyEUHz3UC0EWyEEWElXwyFFrBxkOhcnxDAC2OX0EFBCIKhFmU0BNFyi8TFHKE5Hu1iMsErQIXl0LAePwPmJz0o3zzyELxhwYkaz-ljBMhuiYOKjEXuNUybyMAyGbjGlylsHeMBljz0kpTu1RGMj9jz16yDTP2LjSzKQUheXs05TxVBLtSlmDEdAxEUFjBqFSEBWSGdhgkd3yFlyBJr1pLrRhX8jhV80RRZIxJD3MhJVUEsGUVX1A3SjkBZFSFRDlnmFCNnXDUjVZKcSfg5AMRUGqIxELU4h2GGjUVyWOBRJEjpLnXWmNIVOXzEPxw4Vwz3DHWFF7jsjECqHzngzekc3lICy9Pbm2BWFgiESqDyEbGBjUElXhwqFUDLzqEkxRhk1GRNMXHbhZGxOtzFEbH7hJlB0BkpUcFeONBT2dNrWhVKyyzs1lMjMaULO2i7D-xBAtHAhsD9n6jJWyVrP3h1G+ybIG0V2f0wG7IzXsGXkIKNFDLWEoNUBDFRDmDrOHTUA9z2znP+0B3YAXMSX2D4XGi7BsHUHXJh2SEhBWHyQezmEBLp2BJnM9yPNZzuW-DPImRsCzTXj1EWFkEmIQHjyHMpST2tFkAPL+29193oX-LhGNGbl4TBBMDSDdksjLxDHbDRCOGULFFTxPJQuMEcgYmNCMmxI3270skrFbHMkA07BPzFNHwHAv0iU4Gv2nhQuPHlmPUtNz1tG3DyBDDWAWEow3Fpw2KIXQIgKN2wPQlgPIptB+N3lSVC2hyKCNBsgH1sGP2GnM2nI+DULYI4PROjPwKZAyDBwBHkFyloJkMsmovKAPC70yFTmsHqNSKaPSMEKstqy9JWAFCFHbztB5NdlkJshMHUCFF3k5EYPYraB6M4H8rrhaKkjaPQnIuW19mFCyAjE4lsCixZAHmLOZGtCtBcBcCAA */
     id: 'Modeling',
 
     tsTypes: {} as import('./modelingMachine.typegen').Typegen0,
@@ -505,9 +511,9 @@ export const modelingMachine = createMachine(
       },
 
       'Sketch no face': {
-        entry: 'show default planes',
+        entry: ['show default planes', 'set selection filter to faces only'],
 
-        exit: 'hide default planes',
+        exit: ['hide default planes', 'set selection filter to defaults'],
         on: {
           'Select default plane': {
             target: 'animating to plane',
@@ -940,6 +946,24 @@ export const modelingMachine = createMachine(
       'engineToClient cam sync direction': () => {
         sceneInfra.camControls.syncDirection = 'engineToClient'
       },
+      'set selection filter to faces only': () =>
+        engineCommandManager.sendSceneCommand({
+          type: 'modeling_cmd_req',
+          cmd_id: uuidv4(),
+          cmd: {
+            type: 'set_selection_filter',
+            filter: ['face'],
+          },
+        }),
+      'set selection filter to defaults': () =>
+        engineCommandManager.sendSceneCommand({
+          type: 'modeling_cmd_req',
+          cmd_id: uuidv4(),
+          cmd: {
+            type: 'set_selection_filter',
+            filter: ['face', 'edge', 'solid2d'],
+          },
+        }),
     },
     // end actions
   }

src/useStore.ts

@@ -263,7 +263,7 @@ export async function executeAst({
     }
     const programMemory = await (useFakeExecutor
       ? enginelessExecutor(ast, programMemoryOverride || programMemoryInit())
-      : _executor(ast, programMemoryInit(), engineCommandManager))
+      : _executor(ast, programMemoryInit(), engineCommandManager, false))
 
     await engineCommandManager.waitForAllCommands()
     return {

src/wasm-lib/Cargo.lock

@@ -246,18 +246,18 @@ checksum = "30c5ef0ede93efbf733c1a727f3b6b5a1060bbedd5600183e66f6e4be4af0ec5"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
 name = "async-trait"
-version = "0.1.78"
+version = "0.1.79"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "461abc97219de0eaaf81fe3ef974a540158f3d079c2ab200f891f1a2ef201e85"
+checksum = "a507401cad91ec6a857ed5513a2073c82a9b9048762b885bb98655b306964681"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -280,7 +280,7 @@ checksum = "3c87f3f15e7794432337fc718554eaa4dc8f04c9677a950ffe366f20a162ae42"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -322,6 +322,12 @@ version = "0.21.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "9d297deb1925b89f2ccc13d7635fa0714f12c87adce1c75356b39ca9b7178567"
 
+[[package]]
+name = "base64"
+version = "0.22.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "9475866fec1451be56a3c2400fd081ff546538961565ccb5b7142cbd22bc7a51"
+
 [[package]]
 name = "base64ct"
 version = "1.6.0"
@@ -507,9 +513,9 @@ dependencies = [
 
 [[package]]
 name = "chrono"
-version = "0.4.35"
+version = "0.4.37"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8eaf5903dcbc0a39312feb77df2ff4c76387d591b9fc7b04a238dcf8bb62639a"
+checksum = "8a0d04d43504c61aa6c7531f1871dd0d418d91130162063b789da00fd7057a5e"
 dependencies = [
  "android-tzdata",
  "iana-time-zone",
@@ -590,7 +596,7 @@ dependencies = [
  "heck 0.5.0",
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -840,7 +846,7 @@ checksum = "f46882e17999c6cc590af592290432be3bce0428cb0d5f8b6715e4dc7b383eb3"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -881,7 +887,7 @@ checksum = "377af281d8f23663862a7c84623bc5dcf7f8c44b13c7496a590bdc157f941a43"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
  "synstructure 0.13.1",
 ]
 
@@ -935,7 +941,7 @@ dependencies = [
  "rustfmt-wrapper",
  "serde",
  "serde_tokenstream",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -947,7 +953,7 @@ dependencies = [
  "diesel_table_macro_syntax",
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -956,7 +962,7 @@ version = "0.1.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "fc5557efc453706fed5e4fa85006fe9817c224c3f480a34c7e5959fd700921c5"
 dependencies = [
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -985,7 +991,7 @@ checksum = "487585f4d0c6655fe74905e2504d8ad6908e4db67f744eb140876906c2f3175d"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -1067,7 +1073,7 @@ checksum = "03cdc46ec28bd728e67540c528013c6a10eb69a02eb31078a1bda695438cbfb8"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -1284,7 +1290,7 @@ checksum = "87750cf4b7a4c0625b1529e4c543c2182106e4dedc60a2a6455e00d212c489ac"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -1389,7 +1395,7 @@ dependencies = [
  "inflections",
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -1724,16 +1730,15 @@ dependencies = [
 
 [[package]]
 name = "insta"
-version = "1.36.1"
+version = "1.37.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0a7c22c4d34ef4788c351e971c52bfdfe7ea2766f8c5466bc175dd46e52ac22e"
+checksum = "1718b3f2b85bb5054baf8ce406e36401f27c3169205f4175504c4b1d98252d3f"
 dependencies = [
  "console",
  "lazy_static",
  "linked-hash-map",
  "serde",
  "similar",
- "yaml-rust",
 ]
 
 [[package]]
@@ -1843,9 +1848,11 @@ dependencies = [
  "approx 0.5.1",
  "async-recursion",
  "async-trait",
+ "base64 0.22.0",
  "bson",
  "chrono",
  "clap",
+ "convert_case",
  "criterion",
  "dashmap",
  "databake",
@@ -1853,6 +1860,7 @@ dependencies = [
  "expectorate",
  "futures",
  "gltf-json",
+ "image",
  "insta",
  "itertools 0.12.1",
  "js-sys",
@@ -1874,6 +1882,7 @@ dependencies = [
  "tokio-tungstenite",
  "tower-lsp",
  "ts-rs",
+ "twenty-twenty",
  "uuid",
  "wasm-bindgen",
  "wasm-bindgen-futures",
@@ -1891,14 +1900,14 @@ dependencies = [
  "pretty_assertions",
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
 name = "kittycad"
-version = "0.2.62"
+version = "0.2.63"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4bb6a3e37a902c099f3f077f1e75814339bf5d548151a675544366841a882377"
+checksum = "93a332250e08fd715ad3d5826e04d36da1c5bb42d0c1b1ff1f0598278b9ebf3c"
 dependencies = [
  "anyhow",
  "async-trait",
@@ -1961,7 +1970,7 @@ source = "git+https://github.com/KittyCAD/modeling-api?branch=main#a3b8df282c684
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -2009,7 +2018,7 @@ source = "git+https://github.com/KittyCAD/modeling-api?branch=main#a3b8df282c684
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -2382,7 +2391,7 @@ checksum = "a948666b637a0f465e8564c73e89d4dde00d72d4d473cc972f390fc3dcee7d9c"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -2539,7 +2548,7 @@ dependencies = [
  "regex",
  "regex-syntax 0.7.5",
  "structmeta 0.2.0",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -2553,7 +2562,7 @@ dependencies = [
  "regex",
  "regex-syntax 0.8.2",
  "structmeta 0.3.0",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -2619,7 +2628,7 @@ checksum = "2f38a4412a78282e09a2cf38d195ea5420d15ba0602cb375210efbc877243965"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -3481,7 +3490,7 @@ checksum = "7eb0b34b42edc17f6b7cac84a52a1c5f0e1bb2227e997ca9011ea3dd34e8610b"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -3497,9 +3506,9 @@ dependencies = [
 
 [[package]]
 name = "serde_json"
-version = "1.0.114"
+version = "1.0.115"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c5f09b1bd632ef549eaa9f60a1f8de742bdbc698e6cee2095fc84dde5f549ae0"
+checksum = "12dc5c46daa8e9fdf4f5e71b6cf9a53f2487da0e86e55808e2d35539666497dd"
 dependencies = [
  "indexmap 2.2.5",
  "itoa",
@@ -3515,7 +3524,7 @@ checksum = "0b2e6b945e9d3df726b65d6ee24060aff8e3533d431f677a9695db04eff9dfdb"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -3536,7 +3545,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "serde",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -3705,7 +3714,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "structmeta-derive 0.2.0",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -3717,7 +3726,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "structmeta-derive 0.3.0",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -3728,7 +3737,7 @@ checksum = "a60bcaff7397072dca0017d1db428e30d5002e00b6847703e2e42005c95fbe00"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -3739,7 +3748,7 @@ checksum = "152a0b65a590ff6c3da95cabe2353ee04e6167c896b28e3b14478c2636c922fc"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -3811,9 +3820,9 @@ dependencies = [
 
 [[package]]
 name = "syn"
-version = "2.0.53"
+version = "2.0.55"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7383cd0e49fff4b6b90ca5670bfd3e9d6a733b3f90c686605aa7eec8c4996032"
+checksum = "002a1b3dbf967edfafc32655d0f377ab0bb7b994aa1d32c8cc7e9b8bf3ebb8f0"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -3846,7 +3855,7 @@ checksum = "c8af7666ab7b6390ab78131fb5b0fce11d6b7a6951602017c35fa82800708971"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -3947,7 +3956,7 @@ checksum = "c61f3ba182994efc43764a46c018c347bc492c79f024e705f46567b418f6d4f7"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -4054,7 +4063,7 @@ checksum = "5b8a1e28f2deaa14e508979454cb3a223b10b938b45af148bc0986de36f1923b"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -4217,7 +4226,7 @@ checksum = "84fd902d4e0b9a4b27f2f440108dc034e1758628a9b702f8ec61ad66355422fa"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -4245,7 +4254,7 @@ checksum = "34704c8d6ebcbc939824180af020566b01a7c01f80641264eba0999f6c2b6be7"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -4320,7 +4329,7 @@ dependencies = [
  "Inflector",
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
  "termcolor",
 ]
 
@@ -4562,7 +4571,7 @@ dependencies = [
  "once_cell",
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
  "wasm-bindgen-shared",
 ]
 
@@ -4597,7 +4606,7 @@ checksum = "e94f17b526d0a461a191c78ea52bbce64071ed5c04c9ffe424dcb38f74171bb7"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
  "wasm-bindgen-backend",
  "wasm-bindgen-shared",
 ]
@@ -5167,7 +5176,7 @@ checksum = "9ce1b18ccd8e73a9321186f97e46f9f04b778851177567b1975109d26a08d2a6"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]
@@ -5187,7 +5196,7 @@ checksum = "ce36e65b0d2999d2aafac989fb249189a141aee1f53c612c1f37d72631959f69"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.53",
+ "syn 2.0.55",
 ]
 
 [[package]]

src/wasm-lib/Cargo.toml

@@ -14,7 +14,7 @@ bson = { version = "2.9.0", features = ["uuid-1", "chrono"] }
 gloo-utils = "0.2.0"
 kcl-lib = { path = "kcl" }
 kittycad = { workspace = true }
-serde_json = "1.0.114"
+serde_json = "1.0.115"
 uuid = { version = "1.8.0", features = ["v4", "js", "serde"] }
 wasm-bindgen = "0.2.91"
 wasm-bindgen-futures = "0.4.42"
@@ -59,7 +59,7 @@ members = [
 ]
 
 [workspace.dependencies]
-kittycad = { version = "0.2.62", default-features = false, features = ["js", "requests"] }
+kittycad = { version = "0.2.63", default-features = false, features = ["js", "requests"] }
 kittycad-execution-plan = { git = "https://github.com/KittyCAD/modeling-api", branch = "main" }
 kittycad-execution-plan-macros = { git = "https://github.com/KittyCAD/modeling-api", branch = "main" }
 kittycad-execution-plan-traits = { git = "https://github.com/KittyCAD/modeling-api", branch = "main" }

src/wasm-lib/derive-docs/Cargo.toml

@@ -20,7 +20,7 @@ quote = "1"
 regex = "1.10"
 serde = { version = "1.0.197", features = ["derive"] }
 serde_tokenstream = "0.2"
-syn = { version = "2.0.53", features = ["full"] }
+syn = { version = "2.0.55", features = ["full"] }
 
 [dev-dependencies]
 anyhow = "1.0.81"

src/wasm-lib/derive-docs/src/lib.rs

@@ -201,7 +201,7 @@ fn do_stdlib_inner(
         .code_blocks
         .iter()
         .enumerate()
-        .map(|(index, code_block)| generate_code_block_test(&fn_name_str, code_block, index))
+        .map(|(index, code_block)| generate_code_block_test(&fn_name_str, code_block, index, &metadata.tags))
         .collect::<Vec<_>>();
 
     let tags = metadata
@@ -731,12 +731,18 @@ fn parse_array_type(type_name: &str) -> Option<(&str, usize)> {
 
 // For each kcl code block, we want to generate a test that checks that the
 // code block is valid kcl code and compiles and executes.
-fn generate_code_block_test(fn_name: &str, code_block: &str, index: usize) -> proc_macro2::TokenStream {
+fn generate_code_block_test(
+    fn_name: &str,
+    code_block: &str,
+    index: usize,
+    tags: &[String],
+) -> proc_macro2::TokenStream {
     let test_name = format_ident!("serial_test_example_{}{}", fn_name, index);
+    let test_name_str = format!("serial_test_example_{}{}", fn_name, index);
 
     // TODO: We ignore import for now, because the files don't exist and we just want
     // to show easy imports.
-    let ignored = if fn_name == "import" {
+    let ignored = if tags.contains(&"norun".to_string()) {
         quote! { #[ignore] }
     } else {
         quote! {}
@@ -778,14 +784,58 @@ fn generate_code_block_test(fn_name: &str, code_block: &str, index: usize) -> pr
             let parser = crate::parser::Parser::new(tokens);
             let program = parser.ast().unwrap();
             let mut mem: crate::executor::ProgramMemory = Default::default();
-            let ctx = crate::executor::ExecutorContext {
-                engine: std::sync::Arc::new(Box::new(crate::engine::conn::EngineConnection::new(ws).await.unwrap())),
-                fs: crate::fs::FileManager::new(),
-                stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-                units: kittycad::types::UnitLength::Mm,
-            };
+            let units = kittycad::types::UnitLength::Mm;
+            let ctx = crate::executor::ExecutorContext::new(ws, units.clone()).await.unwrap();
 
             crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx).await.unwrap();
+
+            let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+
+            ctx.engine
+                .send_modeling_cmd(
+                    false,
+                    uuid::Uuid::new_v4(),
+                    crate::executor::SourceRange::default(),
+                    kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                        center: kittycad::types::Point3D { x: 0.0, y: 0.0, z: 0.0 },
+                        up: kittycad::types::Point3D { x: 0.0, y: 0.0, z: 1.0 },
+                        vantage: kittycad::types::Point3D { x: 0.0, y: -x, z: y },
+                        sequence: None,
+                    },
+                )
+                .await.unwrap();
+
+            // Send a snapshot request to the engine.
+            let resp = ctx
+                .engine
+                .send_modeling_cmd(
+                    false,
+                    uuid::Uuid::new_v4(),
+                    crate::executor::SourceRange::default(),
+                    kittycad::types::ModelingCmd::TakeSnapshot {
+                        format: kittycad::types::ImageFormat::Png,
+                    },
+                )
+                .await.unwrap();
+
+            // Create a temporary file to write the output to.
+            let output_file = std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+
+            if let kittycad::types::OkWebSocketResponseData::Modeling {
+                modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+            } = &resp
+            {
+                // Save the snapshot locally.
+                std::fs::write(&output_file, &data.contents.0).unwrap();
+            } else {
+                panic!("Unexpected response from engine: {:?}", resp);
+            }
+
+
+            // Read the output file.
+            let actual = image::io::Reader::open(output_file).unwrap().decode().unwrap();
+            twenty_twenty::assert_image(&format!("tests/outputs/{}.png", #test_name_str), &actual, 1.0);
+
         }
     }
 }

src/wasm-lib/derive-docs/src/tests.rs

@@ -345,6 +345,7 @@ fn test_stdlib_doc_comment_with_code_on_ignored_function() {
     let (item, errors) = do_stdlib(
         quote! {
             name = "import",
+            tags = ["norun"]
         },
         quote! {
             /// This is some function.

src/wasm-lib/derive-docs/tests/array.gen

@@ -29,19 +29,72 @@ mod test_examples_show {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_show0"),
+            &actual,
+            1.0,
+        );
     }
 
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
@@ -73,19 +126,72 @@ mod test_examples_show {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_show1"),
+            &actual,
+            1.0,
+        );
     }
 }
 

src/wasm-lib/derive-docs/tests/box.gen

@@ -29,19 +29,72 @@ mod test_examples_show {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_show0"),
+            &actual,
+            1.0,
+        );
     }
 }
 

src/wasm-lib/derive-docs/tests/doc_comment_with_code.gen

@@ -29,19 +29,72 @@ mod test_examples_my_func {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_my_func0"),
+            &actual,
+            1.0,
+        );
     }
 
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
@@ -73,19 +126,72 @@ mod test_examples_my_func {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_my_func1"),
+            &actual,
+            1.0,
+        );
     }
 }
 

src/wasm-lib/derive-docs/tests/doc_comment_with_code_on_ignored_function.gen

@@ -30,19 +30,72 @@ mod test_examples_import {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_import0"),
+            &actual,
+            1.0,
+        );
     }
 
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
@@ -75,19 +128,72 @@ mod test_examples_import {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_import1"),
+            &actual,
+            1.0,
+        );
     }
 }
 
@@ -126,7 +232,7 @@ impl crate::docs::StdLibFn for Import {
     }
 
     fn tags(&self) -> Vec<String> {
-        vec![]
+        vec!["norun".to_string()]
     }
 
     fn args(&self) -> Vec<crate::docs::StdLibFnArg> {

src/wasm-lib/derive-docs/tests/lineTo.gen

@@ -29,19 +29,72 @@ mod test_examples_line_to {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_line_to0"),
+            &actual,
+            1.0,
+        );
     }
 
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
@@ -73,19 +126,72 @@ mod test_examples_line_to {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_line_to1"),
+            &actual,
+            1.0,
+        );
     }
 }
 

src/wasm-lib/derive-docs/tests/min.gen

@@ -29,19 +29,72 @@ mod test_examples_min {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_min0"),
+            &actual,
+            1.0,
+        );
     }
 
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
@@ -73,19 +126,72 @@ mod test_examples_min {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_min1"),
+            &actual,
+            1.0,
+        );
     }
 }
 

src/wasm-lib/derive-docs/tests/option.gen

@@ -29,19 +29,72 @@ mod test_examples_show {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_show0"),
+            &actual,
+            1.0,
+        );
     }
 }
 

src/wasm-lib/derive-docs/tests/option_input_format.gen

@@ -1,7 +1,6 @@
 #[cfg(test)]
 mod test_examples_import {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
-    #[ignore]
     async fn serial_test_example_import0() {
         let user_agent = concat!(env!("CARGO_PKG_NAME"), ".rs/", env!("CARGO_PKG_VERSION"),);
         let http_client = reqwest::Client::builder()
@@ -30,19 +29,72 @@ mod test_examples_import {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_import0"),
+            &actual,
+            1.0,
+        );
     }
 }
 

src/wasm-lib/derive-docs/tests/return_vec_box_sketch_group.gen

@@ -1,7 +1,6 @@
 #[cfg(test)]
 mod test_examples_import {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
-    #[ignore]
     async fn serial_test_example_import0() {
         let user_agent = concat!(env!("CARGO_PKG_NAME"), ".rs/", env!("CARGO_PKG_VERSION"),);
         let http_client = reqwest::Client::builder()
@@ -30,19 +29,72 @@ mod test_examples_import {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_import0"),
+            &actual,
+            1.0,
+        );
     }
 }
 

src/wasm-lib/derive-docs/tests/return_vec_sketch_group.gen

@@ -1,7 +1,6 @@
 #[cfg(test)]
 mod test_examples_import {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
-    #[ignore]
     async fn serial_test_example_import0() {
         let user_agent = concat!(env!("CARGO_PKG_NAME"), ".rs/", env!("CARGO_PKG_VERSION"),);
         let http_client = reqwest::Client::builder()
@@ -30,19 +29,72 @@ mod test_examples_import {
         let parser = crate::parser::Parser::new(tokens);
         let program = parser.ast().unwrap();
         let mut mem: crate::executor::ProgramMemory = Default::default();
-        let ctx = crate::executor::ExecutorContext {
-            engine: std::sync::Arc::new(Box::new(
-                crate::engine::conn::EngineConnection::new(ws)
-                    .await
-                    .unwrap(),
-            )),
-            fs: crate::fs::FileManager::new(),
-            stdlib: std::sync::Arc::new(crate::std::StdLib::new()),
-            units: kittycad::types::UnitLength::Mm,
-        };
+        let units = kittycad::types::UnitLength::Mm;
+        let ctx = crate::executor::ExecutorContext::new(ws, units.clone())
+            .await
+            .unwrap();
         crate::executor::execute(program, &mut mem, crate::executor::BodyType::Root, &ctx)
             .await
             .unwrap();
+        let (x, y) = crate::std::utils::get_camera_zoom_magnitude_per_unit_length(units);
+        ctx.engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::DefaultCameraLookAt {
+                    center: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 0.0,
+                    },
+                    up: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: 0.0,
+                        z: 1.0,
+                    },
+                    vantage: kittycad::types::Point3D {
+                        x: 0.0,
+                        y: -x,
+                        z: y,
+                    },
+                    sequence: None,
+                },
+            )
+            .await
+            .unwrap();
+        let resp = ctx
+            .engine
+            .send_modeling_cmd(
+                false,
+                uuid::Uuid::new_v4(),
+                crate::executor::SourceRange::default(),
+                kittycad::types::ModelingCmd::TakeSnapshot {
+                    format: kittycad::types::ImageFormat::Png,
+                },
+            )
+            .await
+            .unwrap();
+        let output_file =
+            std::env::temp_dir().join(format!("kcl_output_{}.png", uuid::Uuid::new_v4()));
+        if let kittycad::types::OkWebSocketResponseData::Modeling {
+            modeling_response: kittycad::types::OkModelingCmdResponse::TakeSnapshot { data },
+        } = &resp
+        {
+            std::fs::write(&output_file, &data.contents.0).unwrap();
+        } else {
+            panic!("Unexpected response from engine: {:?}", resp);
+        }
+
+        let actual = image::io::Reader::open(output_file)
+            .unwrap()
+            .decode()
+            .unwrap();
+        twenty_twenty::assert_image(
+            &format!("tests/outputs/{}.png", "serial_test_example_import0"),
+            &actual,
+            1.0,
+        );
     }
 }