Clean up for PR

Fixes #6256

.codespellrc

@@ -1,3 +1,3 @@
 [codespell]
-ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser
+ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser,fromM,FromM
 skip: **/target,node_modules,build,dist,./out,**/Cargo.lock,./docs/kcl/*.md,.yarn.lock,**/yarn.lock,./openapi/*.json,./packages/codemirror-lang-kcl/test/all.test.ts,./public/kcl-samples,./rust/kcl-lib/tests/kcl_samples,tsconfig.tsbuildinfo

.github/ci-cd-scripts/start-vector-macos.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+set -euo pipefail
+
+# Install vector
+brew tap vectordotdev/brew && brew install vector
+
+# Configure vector
+mkdir -p /tmp/vector
+cp .github/workflows/vector.toml /tmp/vector.toml
+sed -i '' "s#OS_NAME#${OS_NAME}#g" /tmp/vector.toml
+sed -i '' "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+sed -i '' "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+sed -i '' "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+sed -i '' "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+sed -i '' "s#GH_ACTIONS_AXIOM_TOKEN#${GH_ACTIONS_AXIOM_TOKEN}#g" /tmp/vector.toml
+
+# Display settings
+echo
+echo 'Vector config:'
+cat /tmp/vector.toml
+echo
+
+# Start in the background
+$(brew --prefix)/opt/vector/bin/vector --config /tmp/vector.toml &

.github/ci-cd-scripts/start-vector-ubuntu.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+set -euo pipefail
+
+# Install vector
+curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev | bash -s -- -y
+
+# Configure vector
+mkdir -p /tmp/vector
+cp .github/workflows/vector.toml /tmp/vector.toml
+sed -i "s#OS_NAME#${OS_NAME}#g" /tmp/vector.toml
+sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${GH_ACTIONS_AXIOM_TOKEN}#g" /tmp/vector.toml
+
+# Display settings
+echo
+echo 'Vector config:'
+cat /tmp/vector.toml
+echo
+
+# Start in background
+${HOME}/.vector/bin/vector --config /tmp/vector.toml &

.github/workflows/build-and-store-wasm.yml

@@ -24,7 +24,7 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         with:
           tool: wasm-pack
       - name: Rust Cache

.github/workflows/build-apps.yml

@@ -10,7 +10,8 @@ on:
       - 'nightly-v[0-9]+.[0-9]+.[0-9]+'
 
 env:
-  IS_RELEASE: ${{ github.ref_type == 'tag' && startsWith(github.ref_name, 'v') }}
+  # IS_RELEASE: ${{ github.ref_type == 'tag' && startsWith(github.ref_name, 'v') }}
+  IS_RELEASE: true
   IS_NIGHTLY: ${{ github.ref_type == 'tag' && startsWith(github.ref_name, 'nightly-v') }}
 
 concurrency:
@@ -77,7 +78,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         if: ${{ steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -99,11 +100,11 @@ jobs:
           yarn files:set-version
           yarn files:flip-to-nightly
 
-      - name: Set release version
-        if: ${{ env.IS_RELEASE == 'true' }}
-        run: |
-          export VERSION=${GITHUB_REF_NAME#v}
-          yarn files:set-version
+      # - name: Set release version
+      #   if: ${{ env.IS_RELEASE == 'true' }}
+      #   run: |
+      #     export VERSION=${GITHUB_REF_NAME#v}
+      #     yarn files:set-version
 
       - uses: actions/upload-artifact@v4
         with:
@@ -183,30 +184,32 @@ jobs:
           max_attempts: 3
           command: yarn install
 
+      # Next steps are from Digicert docs at
+      # https://docs.digicert.com/en/digicert-keylocker/ci-cd-integrations/scripts/github/scripts-for-signing-using-ksp-library-on-github.html#ksp-signing-using-github-action-488726
       - name: Prepare certificate and variables (Windows only)
         if: ${{ (env.IS_RELEASE == 'true' || env.IS_NIGHTLY == 'true') && matrix.os == 'windows-2022' }}
         run: |
-          echo "${{secrets.SM_CLIENT_CERT_FILE_B64 }}" | base64 --decode > /d/Certificate_pkcs12.p12
-          cat /d/Certificate_pkcs12.p12
-          echo "::set-output name=version::${GITHUB_REF#refs/tags/v}"
+          CERTIFICATE_PATH=$RUNNER_TEMP/certificate.p12
+          echo "$SM_CLIENT_CERT_FILE_B64" | base64 --decode > $CERTIFICATE_PATH
+          echo "SM_CLIENT_CERT_FILE=$CERTIFICATE_PATH" >> "$GITHUB_ENV"
           echo "SM_HOST=${{ secrets.SM_HOST }}" >> "$GITHUB_ENV"
           echo "SM_API_KEY=${{ secrets.SM_API_KEY }}" >> "$GITHUB_ENV"
-          echo "SM_CLIENT_CERT_FILE=D:\\Certificate_pkcs12.p12" >> "$GITHUB_ENV"
           echo "SM_CLIENT_CERT_PASSWORD=${{ secrets.SM_CLIENT_CERT_PASSWORD }}" >> "$GITHUB_ENV"
           echo "C:\Program Files (x86)\Windows Kits\10\App Certification Kit" >> $GITHUB_PATH
           echo "C:\Program Files (x86)\Microsoft SDKs\Windows\v10.0A\bin\NETFX 4.8 Tools" >> $GITHUB_PATH
-          echo "C:\Program Files\DigiCert\DigiCert One Signing Manager Tools" >> $GITHUB_PATH
+          echo "C:\Program Files\DigiCert\DigiCert Keylocker Tools" >> $GITHUB_PATH
         shell: bash
 
       - name: Setup certicate with SSM KSP (Windows only)
         if: ${{ (env.IS_RELEASE == 'true' || env.IS_NIGHTLY == 'true') && matrix.os == 'windows-2022' }}
         run: |
-          curl -X GET  https://one.digicert.com/signingmanager/api-ui/v1/releases/smtools-windows-x64.msi/download -H "x-api-key:%SM_API_KEY%" -o smtools-windows-x64.msi
-          msiexec /i smtools-windows-x64.msi /quiet /qn
+          curl -X GET  https://one.digicert.com/signingmanager/api-ui/v1/releases/Keylockertools-windows-x64.msi/download -H "x-api-key:%SM_API_KEY%" -o Keylockertools-windows-x64.msi
+          msiexec /i Keylockertools-windows-x64.msi /quiet /qn
           smksp_registrar.exe list
           smctl.exe keypair ls
           C:\Windows\System32\certutil.exe -csp "DigiCert Signing Manager KSP" -key -user
           smksp_cert_sync.exe
+          smctl windows certsync
         shell: cmd
 
       - name: Build the app (debug)
@@ -225,8 +228,8 @@ jobs:
           CSC_LINK: ${{ secrets.APPLE_CERTIFICATE }}
           CSC_KEY_PASSWORD: ${{ secrets.APPLE_CERTIFICATE_PASSWORD }}
           CSC_KEYCHAIN: ${{ secrets.APPLE_SIGNING_IDENTITY }}
-          WINDOWS_CERTIFICATE_THUMBPRINT: ${{ secrets.WINDOWS_CERTIFICATE_THUMBPRINT }}
-          DEBUG: "electron-notarize*"
+          # DEBUG: "electron-notarize*"
+          DEBUG: electron-builder
         # TODO: Fix electron-notarize flakes. The logs above should help gather more data on failures
         uses: nick-fields/retry@v3.0.2
         with:

.github/workflows/cargo-test.yml

@@ -34,20 +34,11 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - name: Install vector
-        run: |
-          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
-          chmod +x /tmp/vector.sh
-          /tmp/vector.sh -y -no-modify-path
-          mkdir -p /tmp/vector
-          cp .github/workflows/vector.toml /tmp/vector.toml
-          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
-          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
-          cat /tmp/vector.toml
-          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
+      - name: Start Vector
+        run: .github/ci-cd-scripts/start-vector-ubuntu.sh
+        env:
+          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
+          OS_NAME: ${{ env.OS_NAME }}
       - uses: taiki-e/install-action@cargo-llvm-cov
       - uses: taiki-e/install-action@nextest
       - name: Install just

.github/workflows/e2e-tests.yml

@@ -140,7 +140,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         if: ${{ needs.conditions.outputs.should-run == 'true' && steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -281,7 +281,7 @@ jobs:
         os:
           - "runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64"
           - namespace-profile-macos-8-cores
-          - windows-latest
+          - windows-latest-8-cores
         shardIndex: [1, 2, 3, 4]
         shardTotal: [4]
         # Disable macos and windows tests on hourly e2e tests since we only care
@@ -292,7 +292,7 @@ jobs:
         exclude:
           - os: namespace-profile-macos-8-cores
             isScheduled: true
-          - os: windows-latest
+          - os: windows-latest-8-cores
             isScheduled: true
         # TODO: add ref here for main and latest release tag
     runs-on: ${{ matrix.os }}
@@ -339,22 +339,12 @@ jobs:
         if: needs.conditions.outputs.should-run == 'true'
         run: yarn tronb:vite:dev
 
-      - name: Install vector
-        if: ${{ needs.conditions.outputs.should-run == 'true' && contains(matrix.os, 'ubuntu') }}
-        shell: bash
-        run: |
-          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
-          chmod +x /tmp/vector.sh
-          /tmp/vector.sh -y -no-modify-path
-          mkdir -p /tmp/vector
-          cp .github/workflows/vector.toml /tmp/vector.toml
-          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
-          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
-          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
-          cat /tmp/vector.toml
-          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
+      - name: Start Vector
+        if: ${{ needs.conditions.outputs.should-run == 'true' && !contains(matrix.os, 'windows') }}
+        run: .github/ci-cd-scripts/start-vector-${{ env.OS_NAME }}.sh
+        env:
+          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
+          OS_NAME: ${{ env.OS_NAME }}
 
       - uses: actions/download-artifact@v4
         if: ${{ needs.conditions.outputs.should-run == 'true' && !cancelled() && (success() || failure()) }}

.github/workflows/static-analysis.yml

@@ -51,7 +51,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         with:
           tool: wasm-pack
 
@@ -191,7 +191,7 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         with:
           tool: wasm-pack
 
@@ -236,7 +236,7 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
+      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
         with:
           tool: wasm-pack
 

.github/workflows/vector.toml

@@ -8,6 +8,7 @@ include = ["/tmp/github-actions.log"]
 type = "remap"
 inputs = [ "github-actions-file" ]
 source = '''
+.platform = "OS_NAME"
 .action = "GITHUB_WORKFLOW"
 .repo = "GITHUB_REPOSITORY"
 .sha = "GITHUB_SHA"

Makefile

@@ -5,33 +5,40 @@ all: install build check
 # INSTALL
 
 ifeq ($(OS),Windows_NT)
-	CARGO ?= ~/.cargo/bin/cargo.exe
-	WASM_PACK ?= ~/.cargo/bin/wasm-pack.exe
-else
-	CARGO ?= ~/.cargo/bin/cargo
-	WASM_PACK ?= ~/.cargo/bin/wasm-pack
+export WINDOWS := true
+ifndef MSYSTEM
+export POWERSHELL := true
 endif
+endif
+
+ifdef WINDOWS
+CARGO ?= $(USERPROFILE)/.cargo/bin/cargo.exe
+WASM_PACK ?= $(USERPROFILE)/.cargo/bin/wasm-pack.exe
+else
+CARGO ?= ~/.cargo/bin/cargo
+WASM_PACK ?= ~/.cargo/bin/wasm-pack
+endif 
 
 .PHONY: install
 install: node_modules/.yarn-integrity $(CARGO) $(WASM_PACK) ## Install dependencies
 
 node_modules/.yarn-integrity: package.json yarn.lock
 	yarn install
-ifeq ($(OS),Windows_NT)
+ifdef POWERSHELL
 	@ type nul > $@
 else
 	@ touch $@
 endif
 
 $(CARGO):
-ifeq ($(OS),Windows_NT)
+ifdef WINDOWS
 	yarn install:rust:windows
 else
 	yarn install:rust
 endif
 
 $(WASM_PACK):
-ifeq ($(OS),Windows_NT)
+ifdef WINDOWS
 	yarn install:wasm-pack:cargo
 else
 	yarn install:wasm-pack:sh
@@ -57,7 +64,7 @@ build-web: install public/kcl_wasm_lib_bg.wasm build/index.html
 build-desktop: install public/kcl_wasm_lib_bg.wasm .vite/build/main.js
 
 public/kcl_wasm_lib_bg.wasm: $(CARGO_SOURCES) $(RUST_SOURCES)
-ifeq ($(OS),Windows_NT)
+ifdef WINDOWS
 	yarn build:wasm:dev:windows
 else
 	yarn build:wasm:dev
@@ -140,8 +147,8 @@ endif
 
 .PHONY: clean
 clean: ## Delete all artifacts
-ifeq ($(OS),Windows_NT)
-	git clean --force -d -X
+ifdef POWERSHELL
+	git clean --force -d -x --exclude=.env* --exclude=**/*.env
 else
 	rm -rf .vite/ build/
 	rm -rf trace.zip playwright-report/ test-results/
@@ -152,7 +159,7 @@ endif
 
 .PHONY: help
 help: install
-ifeq ($(OS),Windows_NT)
+ifdef POWERSHELL
 	@ powershell -Command "Get-Content $(MAKEFILE_LIST) | Select-String -Pattern '^[^\s]+:.*##\s.*$$' | ForEach-Object { $$line = $$_.Line -split ':.*?##\s+'; Write-Host -NoNewline $$line[0].PadRight(30) -ForegroundColor Cyan; Write-Host $$line[1] }"
 else
 	@ grep -E '^[^[:space:]]+:.*## .*$$' $(MAKEFILE_LIST) | awk 'BEGIN {FS = ":.*?## "}; {printf "\033[36m%-30s\033[0m %s\n", $$1, $$2}'

docs/kcl/abs.md

@@ -36,9 +36,9 @@ myAngle = -120
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [8, 0])
-  |> angledLine({ angle = abs(myAngle), length = 5 }, %)
+  |> angledLine(angle = abs(myAngle), length = 5)
   |> line(end = [-5, 0])
-  |> angledLine({ angle = myAngle, length = 5 }, %)
+  |> angledLine(angle = myAngle, length = 5)
   |> close()
 
 baseExtrusion = extrude(sketch001, length = 5)

docs/kcl/acos.md

@@ -33,10 +33,7 @@ acos(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = toDegrees(acos(0.5)),
-       length = 10
-     }, %)
+  |> angledLine(angle = toDegrees(acos(0.5)), length = 10)
   |> line(end = [5, 0])
   |> line(endAbsolute = [12, 0])
   |> close()

docs/kcl/angleToMatchLengthX.md

@@ -36,7 +36,7 @@ angleToMatchLengthX(
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [2, 5], tag = $seg01)
-  |> angledLineToX([-angleToMatchLengthX(seg01, 7, %), 10], %)
+  |> angledLine(angle = -angleToMatchLengthX(seg01, 7, %), endAbsoluteX = 10)
   |> close()
 
 extrusion = extrude(sketch001, length = 5)

docs/kcl/angleToMatchLengthY.md

@@ -36,10 +36,7 @@ angleToMatchLengthY(
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [1, 2], tag = $seg01)
-  |> angledLine({
-       angle = angleToMatchLengthY(seg01, 15, %),
-       length = 5
-     }, %)
+  |> angledLine(angle = angleToMatchLengthY(seg01, 15, %), length = 5)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/angledLine.md

@@ -10,8 +10,13 @@ Draw a line segment relative to the current origin using the polar measure of so
 
 ```js
 angledLine(
-  data: AngledLineData,
   sketch: Sketch,
+  angle: number,
+  length?: number,
+  lengthX?: number,
+  lengthY?: number,
+  endAbsoluteX?: number,
+  endAbsoluteY?: number,
   tag?: TagDeclarator,
 ): Sketch
 ```
@@ -21,9 +26,14 @@ angledLine(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `data` | [`AngledLineData`](/docs/kcl/types/AngledLineData) | Data to draw an angled line. | Yes |
-| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) |  | Yes |
-| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | Which sketch should this path be added to? | Yes |
+| `angle` | [`number`](/docs/kcl/types/number) | Which angle should the line be drawn at? | Yes |
+| `length` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the given angle. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| `lengthX` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the X axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| `lengthY` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| `endAbsoluteX` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the X axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| `endAbsoluteY` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 
 ### Returns
 
@@ -36,7 +46,7 @@ angledLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> yLine(endAbsolute = 15)
-  |> angledLine({ angle = 30, length = 15 }, %)
+  |> angledLine(angle = 30, length = 15)
   |> line(end = [8, -10])
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl/asin.md

@@ -33,10 +33,7 @@ asin(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = toDegrees(asin(0.5)),
-       length = 20
-     }, %)
+  |> angledLine(angle = toDegrees(asin(0.5)), length = 20)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/atan.md

@@ -33,10 +33,7 @@ atan(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = toDegrees(atan(1.25)),
-       length = 20
-     }, %)
+  |> angledLine(angle = toDegrees(atan(1.25)), length = 20)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/atan2.md

@@ -37,10 +37,7 @@ atan2(
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = toDegrees(atan2(1.25, 2)),
-       length = 20
-     }, %)
+  |> angledLine(angle = toDegrees(atan2(1.25, 2)), length = 20)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/consts/std-math-E.md

@@ -17,10 +17,10 @@ std::math::E: number = 2.71828182845904523536028747135266250_
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
+  |> angledLine(
     angle = 30,
     length = 2 * E ^ 2,
-  }, %)
+  )
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/consts/std-math-PI.md

@@ -18,7 +18,7 @@ std::math::PI: number = 3.14159265358979323846264338327950288_
 circumference = 70
 
 exampleSketch = startSketchOn(XZ)
- |> circle(center = [0, 0], radius = circumference/ (2 * PI))
+ |> circle(center = [0, 0], radius = circumference / (2 * PI))
 
 example = extrude(exampleSketch, length = 5)
 ```

docs/kcl/consts/std-math-TAU.md

@@ -17,10 +17,10 @@ std::math::TAU: number = 6.28318530717958647692528676655900577_
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
+  |> angledLine(
     angle = 50,
     length = 10 * TAU,
-  }, %)
+  )
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/e.md

@@ -30,7 +30,7 @@ e(): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 30, length = 2 * e() ^ 2 }, %)
+  |> angledLine(angle = 30, length = 2 * e() ^ 2)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/getNextAdjacentEdge.md

@@ -30,10 +30,10 @@ getNextAdjacentEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine({ angle = 60, length = 10 }, %)
-  |> angledLine({ angle = 120, length = 10 }, %)
+  |> angledLine(angle = 60, length = 10)
+  |> angledLine(angle = 120, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
+  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/getOppositeEdge.md

@@ -30,10 +30,10 @@ getOppositeEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine({ angle = 60, length = 10 }, %)
-  |> angledLine({ angle = 120, length = 10 }, %)
+  |> angledLine(angle = 60, length = 10)
+  |> angledLine(angle = 120, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
+  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/getPreviousAdjacentEdge.md

@@ -30,10 +30,10 @@ getPreviousAdjacentEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine({ angle = 60, length = 10 }, %)
-  |> angledLine({ angle = 120, length = 10 }, %)
+  |> angledLine(angle = 60, length = 10)
+  |> angledLine(angle = 120, length = 10)
   |> line(end = [-10, 0])
-  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
+  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/index.md

@@ -43,11 +43,7 @@ layout: manual
   * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
   * [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
   * [`angledLine`](kcl/angledLine)
-  * [`angledLineOfXLength`](kcl/angledLineOfXLength)
-  * [`angledLineOfYLength`](kcl/angledLineOfYLength)
   * [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
-  * [`angledLineToX`](kcl/angledLineToX)
-  * [`angledLineToY`](kcl/angledLineToY)
   * [`appearance`](kcl/appearance)
   * [`arc`](kcl/arc)
   * [`arcTo`](kcl/arcTo)
@@ -65,11 +61,15 @@ layout: manual
   * [`chamfer`](kcl/chamfer)
   * [`circleThreePoint`](kcl/circleThreePoint)
   * [`close`](kcl/close)
-  * [`cm`](kcl/cm)
   * [`extrude`](kcl/extrude)
   * [`fillet`](kcl/fillet)
   * [`floor`](kcl/floor)
-  * [`ft`](kcl/ft)
+  * [`fromCm`](kcl/fromCm)
+  * [`fromFt`](kcl/fromFt)
+  * [`fromInches`](kcl/fromInches)
+  * [`fromM`](kcl/fromM)
+  * [`fromMm`](kcl/fromMm)
+  * [`fromYd`](kcl/fromYd)
   * [`getCommonEdge`](kcl/getCommonEdge)
   * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
   * [`getOppositeEdge`](kcl/getOppositeEdge)
@@ -77,7 +77,6 @@ layout: manual
   * [`helix`](kcl/std-helix)
   * [`hole`](kcl/hole)
   * [`hollow`](kcl/hollow)
-  * [`inch`](kcl/inch)
   * [`lastSegX`](kcl/lastSegX)
   * [`lastSegY`](kcl/lastSegY)
   * [`legAngX`](kcl/legAngX)
@@ -89,11 +88,9 @@ layout: manual
   * [`log`](kcl/log)
   * [`log10`](kcl/log10)
   * [`log2`](kcl/log2)
-  * [`m`](kcl/m)
   * [`map`](kcl/map)
   * [`max`](kcl/max)
   * [`min`](kcl/min)
-  * [`mm`](kcl/mm)
   * [`offsetPlane`](kcl/offsetPlane)
   * [`patternCircular2d`](kcl/patternCircular2d)
   * [`patternCircular3d`](kcl/patternCircular3d)
@@ -101,7 +98,6 @@ layout: manual
   * [`patternLinear3d`](kcl/patternLinear3d)
   * [`patternTransform`](kcl/patternTransform)
   * [`patternTransform2d`](kcl/patternTransform2d)
-  * [`polar`](kcl/polar)
   * [`polygon`](kcl/polygon)
   * [`pop`](kcl/pop)
   * [`pow`](kcl/pow)
@@ -137,12 +133,12 @@ layout: manual
   * [`translate`](kcl/translate)
   * [`xLine`](kcl/xLine)
   * [`yLine`](kcl/yLine)
-  * [`yd`](kcl/yd)
 * **std::math**
   * [`E`](kcl/consts/std-math-E)
   * [`PI`](kcl/consts/std-math-PI)
   * [`TAU`](kcl/consts/std-math-TAU)
   * [`cos`](kcl/std-math-cos)
+  * [`polar`](kcl/std-math-polar)
   * [`sin`](kcl/std-math-sin)
   * [`tan`](kcl/std-math-tan)
 * **std::sketch**

docs/kcl/max.md

@@ -33,10 +33,7 @@ max(args: [number]): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = 70,
-       length = max(15, 31, 4, 13, 22)
-     }, %)
+  |> angledLine(angle = 70, length = max(15, 31, 4, 13, 22))
   |> line(end = [20, 0])
   |> close()
 

docs/kcl/min.md

@@ -33,10 +33,7 @@ min(args: [number]): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = 70,
-       length = min(15, 31, 4, 13, 22)
-     }, %)
+  |> angledLine(angle = 70, length = min(15, 31, 4, 13, 22))
   |> line(end = [20, 0])
   |> close()
 

docs/kcl/pow.md

@@ -37,7 +37,7 @@ pow(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 50, length = pow(5, 2) }, %)
+  |> angledLine(angle = 50, length = pow(5, 2))
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/profileStart.md

@@ -29,11 +29,8 @@ profileStart(sketch: Sketch): [number]
 ```js
 sketch001 = startSketchOn(XY)
   |> startProfileAt([5, 2], %)
-  |> angledLine({ angle = 120, length = 50 }, %, $seg01)
-  |> angledLine({
-       angle = segAng(seg01) + 120,
-       length = 50
-     }, %)
+  |> angledLine(angle = 120, length = 50, tag = $seg01)
+  |> angledLine(angle = segAng(seg01) + 120, length = 50)
   |> line(end = profileStart(%))
   |> close()
   |> extrude(length = 20)

docs/kcl/reduce.md

@@ -78,7 +78,7 @@ assertEqual(sum, 6, 0.00001, "1 + 2 + 3 summed is 6")
 ```js
 // Declare a function that sketches a decagon.
 fn decagon(radius) {
-  // Each side of the decagon is turned this many degrees from the previous angle.
+  // Each side of the decagon is turned this many radians from the previous angle.
   stepAngle = 1 / 10 * TAU
 
   // Start the decagon sketch at this point.

docs/kcl/rotate.md

@@ -151,15 +151,9 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       50.61
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %)
+  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/scale.md

@@ -85,15 +85,9 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       50.61
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %)
+  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/segAng.md

@@ -32,9 +32,9 @@ exampleSketch = startSketchOn(XZ)
   |> line(end = [10, 0])
   |> line(end = [5, 10], tag = $seg01)
   |> line(end = [-10, 0])
-  |> angledLine([segAng(seg01), 10], %)
+  |> angledLine(angle = segAng(seg01), length = 10)
   |> line(end = [-10, 0])
-  |> angledLine([segAng(seg01), -15], %)
+  |> angledLine(angle = segAng(seg01), length = -15)
   |> close()
 
 example = extrude(exampleSketch, length = 4)

docs/kcl/segLen.md

@@ -29,9 +29,9 @@ segLen(tag: TagIdentifier): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 60, length = 10 }, %, $thing)
+  |> angledLine(angle = 60, length = 10, tag = $thing)
   |> tangentialArc({ offset = -120, radius = 5 }, %)
-  |> angledLine({ angle = -60, length = segLen(thing) }, %)
+  |> angledLine(angle = -60, length = segLen(thing))
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/settings.md

@@ -6,7 +6,7 @@ layout: manual
 
 # KCL Settings
 
-There are three levels of settings available in the KittyCAD Design Studiolication:
+There are three levels of settings available in Zoo Design Studio:
 
 1. [User Settings](/docs/kcl/settings/user): Global settings that apply to all projects, stored in `user.toml`
 2. [Project Settings](/docs/kcl/settings/project): Settings specific to a project, stored in `project.toml`
@@ -14,7 +14,7 @@ There are three levels of settings available in the KittyCAD Design Studiolicati
 
 ## Configuration Files
 
-The KittyCAD Design Studio uses TOML files for configuration:
+Zoo Design Studio uses TOML files for configuration:
 
 * **User Settings**: `user.toml` - See [complete documentation](/docs/kcl/settings/user)
 * **Project Settings**: `project.toml` - See [complete documentation](/docs/kcl/settings/project)

docs/kcl/settings/user.md

@@ -96,7 +96,7 @@ Permanently dismiss the banner warning to download the desktop app. This setting
 
 ##### stream_idle_mode
 
-When the user is idle, and this is true, the stream will be torn down.
+When the user is idle, teardown the stream after some time.
 
 
 **Default:** None

docs/kcl/sqrt.md

@@ -33,7 +33,7 @@ sqrt(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 50, length = sqrt(2500) }, %)
+  |> angledLine(angle = 50, length = sqrt(2500))
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-helix.md

@@ -9,7 +9,15 @@ Create a helix.
 
 
 ```js
-helix(revolutions: number(_), angleStart: number(deg), ccw?: bool, radius?: number(mm), axis?: Axis3d | Edge, length?: number(mm), cylinder?: Solid): Helix
+helix(
+  revolutions: number(_),
+  angleStart: number(deg),
+  ccw?: bool,
+  radius?: number(mm),
+  axis?: Axis3d | Edge,
+  length?: number(mm),
+  cylinder?: Solid,
+): Helix
 ```
 
 

docs/kcl/std-math-cos.md

@@ -29,10 +29,10 @@ cos(@num: number(rad)): number(_)
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
+  |> angledLine(
     angle = 30,
     length = 3 / cos(toRadians(30)),
-  }, %)
+  )
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-math-tan.md

@@ -29,10 +29,10 @@ tan(@num: number(rad)): number(_)
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
+  |> angledLine(
     angle = 50,
     length = 50 * tan(1/2),
-  }, %)
+  )
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-sketch-circle.md

@@ -6,10 +6,16 @@ layout: manual
 
 
 
-Construct a 2-dimensional circle, of the specified radius, centered atthe provided (x, y) origin point.
+Construct a 2-dimensional circle, of the specified radius, centered at
+the provided (x, y) origin point.
 
 ```js
-circle(@sketch_or_surface: Sketch | Plane | Face, center: Point2d, radius: number, tag?: tag): Sketch
+circle(
+  @sketch_or_surface: Sketch | Plane | Face,
+  center: Point2d,
+  radius: number,
+  tag?: tag,
+): Sketch
 ```
 
 

docs/kcl/sweep.md

@@ -91,15 +91,9 @@ springSketch = startSketchOn(YZ)
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       50.61
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %)
+  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/tangentToEnd.md

@@ -32,10 +32,7 @@ pillSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [20, 0])
   |> tangentialArcToRelative([0, 10], %, $arc1)
-  |> angledLine({
-       angle = tangentToEnd(arc1),
-       length = 20
-     }, %)
+  |> angledLine(angle = tangentToEnd(arc1), length = 20)
   |> tangentialArcToRelative([0, -10], %)
   |> close()
 
@@ -50,10 +47,7 @@ pillSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, 20])
   |> tangentialArcTo([10, 20], %, $arc1)
-  |> angledLine({
-       angle = tangentToEnd(arc1),
-       length = 20
-     }, %)
+  |> angledLine(angle = tangentToEnd(arc1), length = 20)
   |> tangentialArcToRelative([-10, 0], %)
   |> close()
 
@@ -66,10 +60,7 @@ pillExtrude = extrude(pillSketch, length = 10)
 rectangleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0], tag = $seg1)
-  |> angledLine({
-       angle = tangentToEnd(seg1),
-       length = 10
-     }, %)
+  |> angledLine(angle = tangentToEnd(seg1), length = 10)
   |> line(end = [0, 10])
   |> line(end = [-20, 0])
   |> close()
@@ -83,7 +74,7 @@ rectangleExtrude = extrude(rectangleSketch, length = 10)
 bottom = startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> arcTo({ end = [10, 10], interior = [5, 1] }, %, $arc1)
-  |> angledLine([tangentToEnd(arc1), 20], %)
+  |> angledLine(angle = tangentToEnd(arc1), length = 20)
   |> close()
 ```
 
@@ -95,7 +86,7 @@ circSketch = startSketchOn(XY)
 
 triangleSketch = startSketchOn(XY)
   |> startProfileAt([-5, 0], %)
-  |> angledLine([tangentToEnd(circ), 10], %)
+  |> angledLine(angle = tangentToEnd(circ), length = 10)
   |> line(end = [-15, 0])
   |> close()
 ```

docs/kcl/tangentialArc.md

@@ -35,9 +35,9 @@ tangentialArc(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine(angle = 60, length = 10)
   |> tangentialArc({ radius = 10, offset = -120 }, %)
-  |> angledLine({ angle = -60, length = 10 }, %)
+  |> angledLine(angle = -60, length = 10)
   |> close()
 
 example = extrude(exampleSketch, length = 10)

docs/kcl/tangentialArcTo.md

@@ -35,7 +35,7 @@ tangentialArcTo(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine(angle = 60, length = 10)
   |> tangentialArcTo([15, 15], %)
   |> line(end = [10, -15])
   |> close()

docs/kcl/tangentialArcToRelative.md

@@ -35,7 +35,7 @@ tangentialArcToRelative(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 45, length = 10 }, %)
+  |> angledLine(angle = 45, length = 10)
   |> tangentialArcToRelative([0, -10], %)
   |> line(end = [-10, 0])
   |> close()

docs/kcl/tau.md

@@ -30,7 +30,7 @@ tau(): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle = 50, length = 10 * tau() }, %)
+  |> angledLine(angle = 50, length = 10 * tau())
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/toDegrees.md

@@ -33,10 +33,7 @@ toDegrees(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = 50,
-       length = 70 * cos(toDegrees(pi() / 4))
-     }, %)
+  |> angledLine(angle = 50, length = 70 * cos(toDegrees(pi() / 4)))
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/toRadians.md

@@ -33,10 +33,7 @@ toRadians(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine({
-       angle = 50,
-       length = 70 * cos(toRadians(45))
-     }, %)
+  |> angledLine(angle = 50, length = 70 * cos(toRadians(45)))
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/translate.md

@@ -86,15 +86,9 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       50.61
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %)
+  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/types.md

@@ -184,15 +184,17 @@ way:
 ```norun
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-  |> angledLine({
+  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+  |> angledLine(
        angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
-     }, %, $rectangleSegmentB001)
-  |> angledLine({
+       tag = $rectangleSegmentB001,
+     )
+  |> angledLine(
        angle = segAng(rectangleSegmentA001),
        length = -segLen(rectangleSegmentA001),
-     }, %, $rectangleSegmentC001)
+       tag = $rectangleSegmentC001,
+     )
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 ```
@@ -217,15 +219,17 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
+         length = 196.99,
+         tag = $rectangleSegmentB001,
+       )
+    |> angledLine(
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
+         tag = $rectangleSegmentC001,
+       )
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }
@@ -245,15 +249,17 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
+         length = 196.99,
+         tag = $rectangleSegmentB001,
+       )
+    |> angledLine(
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
+         tag = $rectangleSegmentC001,
+       )
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }

docs/kcl/types/PolarCoordsData.md

@@ -1,22 +0,0 @@
----
-title: "PolarCoordsData"
-excerpt: "Data for polar coordinates."
-layout: manual
----
-
-Data for polar coordinates.
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `angle` |[`number`](/docs/kcl/types/number)| The angle of the line (in degrees). | No |
-| `length` |[`number`](/docs/kcl/types/number)| The length of the line. | No |
-
-

docs/kcl/types/tag.md

@@ -14,15 +14,17 @@ way:
 ```js
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-  |> angledLine({
+  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+  |> angledLine(
        angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
-     }, %, $rectangleSegmentB001)
-  |> angledLine({
+       tag = $rectangleSegmentB001,
+     )
+  |> angledLine(
        angle = segAng(rectangleSegmentA001),
        length = -segLen(rectangleSegmentA001),
-     }, %, $rectangleSegmentC001)
+       tag = $rectangleSegmentC001,
+     )
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 ```
@@ -46,15 +48,16 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
+         length = 196.99,
+         tag = $rectangleSegmentB001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
+         length = -segLen(rectangleSegmentA001),
+         tag = $rectangleSegmentC001
+       )
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }
@@ -74,15 +77,15 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001) - 90,
          length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
+       , %, $rectangleSegmentB001)
+    |> angledLine(
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
+       , %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }

docs/kcl/xLine.md

@@ -38,10 +38,10 @@ xLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> xLine(length = 15)
-  |> angledLine({ angle = 80, length = 15 }, %)
+  |> angledLine(angle = 80, length = 15)
   |> line(end = [8, -10])
   |> xLine(length = 10)
-  |> angledLine({ angle = 120, length = 30 }, %)
+  |> angledLine(angle = 120, length = 30)
   |> xLine(length = -15)
   |> close()
 

docs/kcl/yLine.md

@@ -38,7 +38,7 @@ yLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> yLine(length = 15)
-  |> angledLine({ angle = 30, length = 15 }, %)
+  |> angledLine(angle = 30, length = 15)
   |> line(end = [8, -10])
   |> yLine(length = -5)
   |> close()

e2e/playwright/basic-sketch.spec.ts

@@ -137,7 +137,7 @@ async function doBasicSketch(
     await page.waitForTimeout(100)
   }
 
-  await page.getByRole('button', { name: 'Length: open menu' }).click()
+  await page.getByRole('button', { name: 'constraints: open menu' }).click()
   await page.getByRole('button', { name: 'Equal Length' }).click()
 
   // Open the code pane.

e2e/playwright/boolean.spec.ts

@@ -38,7 +38,7 @@ test.describe('Point and click for boolean workflows', () => {
         path.resolve(
           __dirname,
           '../../',
-          './rust/kcl-lib/e2e/executor/inputs/boolean-setup-with'
+          './rust/kcl-lib/e2e/executor/inputs/boolean-setup-with-sketch-on-faces.kcl'
         ),
         'utf-8'
       )
@@ -46,8 +46,6 @@ test.describe('Point and click for boolean workflows', () => {
         localStorage.setItem('persistCode', file)
       }, file)
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
-
       await scene.settled(cmdBar)
 
       // Test coordinates for selection - these might need adjustment based on actual scene layout
@@ -77,6 +75,7 @@ test.describe('Point and click for boolean workflows', () => {
 
         // Select first object in the scene, expect there to be a pixel diff from the selection color change
         await clickFirstObject({ pixelDiff: 50 })
+        await page.waitForTimeout(1000)
 
         // For subtract, we need to proceed to the next step before selecting the second object
         if (operationName !== 'subtract') {
@@ -87,6 +86,8 @@ test.describe('Point and click for boolean workflows', () => {
         // Select second object
         await clickSecondObject({ pixelDiff: 50 })
 
+        await page.waitForTimeout(1000)
+
         // Confirm the operation in the command bar
         await cmdBar.progressCmdBar()
 

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -4,6 +4,7 @@ import { uuidv4 } from '@src/lib/utils'
 
 import type { HomePageFixture } from '@e2e/playwright/fixtures/homePageFixture'
 import type { SceneFixture } from '@e2e/playwright/fixtures/sceneFixture'
+import type { ToolbarFixture } from '@e2e/playwright/fixtures/toolbarFixture'
 import { getUtils } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
 
@@ -15,6 +16,7 @@ test.describe(
       page: Page,
       homePage: HomePageFixture,
       scene: SceneFixture,
+      toolbar: ToolbarFixture,
       plane: string,
       clickCoords: { x: number; y: number }
     ) => {
@@ -59,9 +61,12 @@ test.describe(
       await u.sendCustomCmd(updateCamCommand)
 
       await u.closeDebugPanel()
+
       await page.mouse.click(clickCoords.x, clickCoords.y)
       await page.waitForTimeout(600) // wait for animation
 
+      await toolbar.waitUntilSketchingReady()
+
       await expect(
         page.getByRole('button', { name: 'line Line', exact: true })
       ).toBeVisible()
@@ -117,11 +122,12 @@ test.describe(
     ]
 
     for (const config of planeConfigs) {
-      test(config.plane, async ({ page, homePage, scene }) => {
+      test(config.plane, async ({ page, homePage, scene, toolbar }) => {
         await sketchOnPlaneAndBackSideTest(
           page,
           homePage,
           scene,
+          toolbar,
           config.plane,
           config.coords
         )

e2e/playwright/code-pane-and-errors.spec.ts

@@ -15,6 +15,7 @@ test.describe('Code pane and errors', { tag: ['@skipWin'] }, () => {
     page,
     homePage,
     scene,
+    cmdBar,
   }) => {
     const u = await getUtils(page)
 
@@ -36,7 +37,7 @@ extrude001 = extrude(sketch001, length = 5)`
 
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // Ensure no badge is present
     const codePaneButtonHolder = page.locator('#code-button-holder')
@@ -171,6 +172,8 @@ extrude001 = extrude(sketch001, length = 5)`
     context,
     page,
     homePage,
+    scene,
+    cmdBar,
   }) => {
     // Load the app with the working starter code
     await context.addInitScript((code) => {
@@ -180,9 +183,7 @@ extrude001 = extrude(sketch001, length = 5)`
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
 
-    // FIXME: await scene.waitForExecutionDone() does not work. It still fails.
-    // I needed to increase this timeout to get this to pass.
-    await page.waitForTimeout(10000)
+    await scene.settled(cmdBar)
 
     // Ensure badge is present
     const codePaneButtonHolder = page.locator('#code-button-holder')

e2e/playwright/command-bar-tests.spec.ts

@@ -317,9 +317,13 @@ test.describe('Command bar tests', { tag: ['@skipWin'] }, () => {
   test('Can switch between sketch tools via command bar', async ({
     page,
     homePage,
+    scene,
+    cmdBar,
+    toolbar,
   }) => {
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
+    await scene.settled(cmdBar)
 
     const sketchButton = page.getByRole('button', { name: 'Start Sketch' })
     const cmdBarButton = page.getByRole('button', { name: 'Commands' })
@@ -343,7 +347,9 @@ test.describe('Command bar tests', { tag: ['@skipWin'] }, () => {
 
     // Start a sketch
     await sketchButton.click()
+
     await page.mouse.click(700, 200)
+    await toolbar.waitUntilSketchingReady()
 
     // Switch between sketch tools via the command bar
     await expect(lineToolButton).toHaveAttribute('aria-pressed', 'true')

e2e/playwright/desktop-export.spec.ts

@@ -11,7 +11,7 @@ import { expect, test } from '@e2e/playwright/zoo-test'
 test(
   'export works on the first try',
   { tag: ['@electron', '@skipLocalEngine'] },
-  async ({ page, context, scene, tronApp }, testInfo) => {
+  async ({ page, context, scene, tronApp, cmdBar }, testInfo) => {
     if (!tronApp) {
       fail()
     }
@@ -32,53 +32,41 @@ test(
     })
     await page.setBodyDimensions({ width: 1200, height: 500 })
 
-    page.on('console', console.log)
-
     await test.step('on open of project', async () => {
-      await expect(page.getByText(`bracket`)).toBeVisible()
+      // Open the project
+      const projectName = page.getByText(`bracket`)
+      await expect(projectName).toBeVisible()
+      await projectName.click()
+      await scene.settled(cmdBar)
 
-      // open the project
-      await page.getByText(`bracket`).click()
-
-      // expect zero errors in guter
+      // Expect zero errors in gutter
       await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
 
-      // export the model
+      // Click the export button
       const exportButton = page.getByTestId('export-pane-button')
       await expect(exportButton).toBeVisible()
-
-      await scene.waitForExecutionDone()
-
-      const gltfOption = page.getByText('glTF')
-      const submitButton = page.getByText('Confirm Export')
-      const exportingToastMessage = page.getByText(`Exporting...`)
-      const errorToastMessage = page.getByText(`Error while exporting`)
-      const engineErrorToastMessage = page.getByText(`Nothing to export`)
-      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
-      // The open file's name is `main.kcl`, so the export file name should be `main.gltf`
-      const exportFileName = `main.gltf`
-
-      // Click the export button
       await exportButton.click()
 
+      // Select the first format option
+      const gltfOption = cmdBar.selectOption({ name: 'glTF' })
+      const exportFileName = `main.gltf` // source file is named `main.kcl`
       await expect(gltfOption).toBeVisible()
-      await expect(page.getByText('STL')).toBeVisible()
-
       await page.keyboard.press('Enter')
 
       // Click the checkbox
+      const submitButton = page.getByText('Confirm Export')
       await expect(submitButton).toBeVisible()
-
-      await page.waitForTimeout(500)
-
       await page.keyboard.press('Enter')
 
-      // Find the toast.
       // Look out for the toast message
+      const exportingToastMessage = page.getByText(`Exporting...`)
+      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
       await expect(exportingToastMessage).toBeVisible()
       await expect(alreadyExportingToastMessage).not.toBeVisible()
 
-      // Expect it to succeed.
+      // Expect it to succeed
+      const errorToastMessage = page.getByText(`Error while exporting`)
+      const engineErrorToastMessage = page.getByText(`Nothing to export`)
       await expect(errorToastMessage).not.toBeVisible()
       await expect(engineErrorToastMessage).not.toBeVisible()
 
@@ -86,6 +74,7 @@ test(
       await expect(successToastMessage).toBeVisible()
       await expect(exportingToastMessage).not.toBeVisible()
 
+      // Check for the exported file
       const firstFileFullPath = path.resolve(
         getPlaywrightDownloadDir(tronApp.projectDirName),
         exportFileName
@@ -112,60 +101,50 @@ test(
       const u = await getUtils(page)
       await u.openFilePanel()
 
+      // Click on the other file
       const otherKclButton = page.getByRole('button', { name: 'other.kcl' })
-
-      // Click the file
       await otherKclButton.click()
 
       // Close the file pane
       await u.closeFilePanel()
+      await scene.settled(cmdBar)
 
-      // FIXME: await scene.waitForExecutionDone() does not work. The modeling indicator stays in -receive-reliable and not execution done
-      await page.waitForTimeout(10000)
-
-      // expect zero errors in guter
+      // Expect zero errors in gutter
       await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
 
-      // export the model
+      // Click the export button
       const exportButton = page.getByTestId('export-pane-button')
       await expect(exportButton).toBeVisible()
-
-      const gltfOption = page.getByText('glTF')
-      const submitButton = page.getByText('Confirm Export')
-      const exportingToastMessage = page.getByText(`Exporting...`)
-      const errorToastMessage = page.getByText(`Error while exporting`)
-      const engineErrorToastMessage = page.getByText(`Nothing to export`)
-      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
-      // The open file's name is `other.kcl`, so the export file name should be `other.gltf`
-      const exportFileName = `other.gltf`
-
-      // Click the export button
       await exportButton.click()
 
+      // Select the first format option
+      const gltfOption = cmdBar.selectOption({ name: 'glTF' })
+      const exportFileName = `other.gltf` // source file is named `other.kcl`
       await expect(gltfOption).toBeVisible()
-      await expect(page.getByText('STL')).toBeVisible()
-
       await page.keyboard.press('Enter')
 
       // Click the checkbox
+      const submitButton = page.getByText('Confirm Export')
       await expect(submitButton).toBeVisible()
-
       await page.keyboard.press('Enter')
 
-      // Find the toast.
       // Look out for the toast message
+      const exportingToastMessage = page.getByText(`Exporting...`)
+      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
       await expect(exportingToastMessage).toBeVisible()
+      await expect(alreadyExportingToastMessage).not.toBeVisible()
+
+      // Expect it to succeed
+      const errorToastMessage = page.getByText(`Error while exporting`)
+      const engineErrorToastMessage = page.getByText(`Nothing to export`)
+      await expect(errorToastMessage).not.toBeVisible()
+      await expect(engineErrorToastMessage).not.toBeVisible()
 
       const successToastMessage = page.getByText(`Exported successfully`)
-      await test.step('Check the success toast message shows and nothing else', async () =>
-        Promise.all([
-          expect(alreadyExportingToastMessage).not.toBeVisible(),
-          expect(errorToastMessage).not.toBeVisible(),
-          expect(engineErrorToastMessage).not.toBeVisible(),
-          expect(successToastMessage).toBeVisible(),
-          expect(exportingToastMessage).not.toBeVisible(),
-        ]))
+      await expect(successToastMessage).toBeVisible()
+      await expect(exportingToastMessage).not.toBeVisible()
 
+      // Check for the exported file=
       const secondFileFullPath = path.resolve(
         getPlaywrightDownloadDir(tronApp.projectDirName),
         exportFileName

e2e/playwright/editor-tests.spec.ts

@@ -78,12 +78,14 @@ sketch001 = startSketchOn(XY)
 
     // Ensure we execute the first time.
     await u.openDebugPanel()
-    await expect(
-      page.locator('[data-receive-command-type="scene_clear_all"]')
-    ).toHaveCount(1)
-    await expect(
-      page.locator('[data-message-type="execution-done"]')
-    ).toHaveCount(2)
+    await expect
+      .poll(() =>
+        page.locator('[data-receive-command-type="scene_clear_all"]').count()
+      )
+      .toBe(1)
+    await expect
+      .poll(() => page.locator('[data-message-type="execution-done"]').count())
+      .toBe(2)
 
     // Add whitespace to the end of the code.
     await u.codeLocator.click()
@@ -110,12 +112,14 @@ sketch001 = startSketchOn(XY)
   test('ensure we use the cache, and do not clear on append', async ({
     homePage,
     page,
+    scene,
+    cmdBar,
   }) => {
     const u = await getUtils(page)
     await page.setBodyDimensions({ width: 1000, height: 500 })
 
     await homePage.goToModelingScene()
-    await u.waitForPageLoad()
+    await scene.settled(cmdBar)
 
     await u.codeLocator.click()
     await page.keyboard.type(`sketch001 = startSketchOn(XY)
@@ -499,7 +503,7 @@ sketch_001 = startSketchOn(XY)
     await page.keyboard.press('ArrowLeft')
     await page.keyboard.press('ArrowRight')
 
-    await scene.waitForExecutionDone()
+    await scene.connectionEstablished()
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-info').first()).toBeVisible()
@@ -1315,4 +1319,85 @@ sketch001 = startSketchOn(XZ)
     const element = page.locator('[data-overlay-index="1"]')
     await expect(element).toHaveAttribute('data-overlay-visible', 'true')
   })
+
+  test(`Only show axis planes when there are no errors`, async ({
+    page,
+    homePage,
+    scene,
+    cmdBar,
+  }) => {
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'persistCode',
+        `sketch001 = startSketchOn(XZ)
+    profile001 = circle(sketch001, center = [-100.0, -100.0], radius = 50.0)
+
+    sketch002 = startSketchOn(XZ)
+    profile002 = circle(sketch002, center = [-100.0, 100.0], radius = 50.0)
+    extrude001 = extrude(profile002, length = 0)` // length = 0 is causing the error
+      )
+    })
+
+    const viewportSize = { width: 1200, height: 800 }
+    await page.setBodyDimensions(viewportSize)
+
+    await homePage.goToModelingScene()
+
+    await scene.connectionEstablished()
+    await scene.settled(cmdBar)
+
+    await scene.expectPixelColor(
+      TEST_COLORS.DARK_MODE_BKGD,
+      // This is a position where the blue part of the axis plane is visible if its rendered
+      { x: viewportSize.width * 0.75, y: viewportSize.height * 0.2 },
+      15
+    )
+  })
+
+  test(`test-toolbar-buttons`, async ({
+    page,
+    homePage,
+    toolbar,
+    scene,
+    cmdBar,
+  }) => {
+    await test.step('Load an empty file', async () => {
+      await page.addInitScript(async () => {
+        localStorage.setItem('persistCode', '')
+      })
+      await page.setBodyDimensions({ width: 1200, height: 500 })
+      await homePage.goToModelingScene()
+
+      // wait until scene is ready to be interacted with
+      await scene.connectionEstablished()
+      await scene.settled(cmdBar)
+    })
+
+    await test.step('Test toolbar button correct selection', async () => {
+      await toolbar.expectToolbarMode.toBe('modeling')
+
+      await toolbar.startSketchPlaneSelection()
+
+      // Click on a default plane
+      await page.mouse.click(700, 200)
+
+      // tools cannot be selected immediately, couldn't find an event to await instead.
+      await page.waitForTimeout(1000)
+
+      await toolbar.selectCenterRectangle()
+
+      await expect(page.getByTestId('center-rectangle')).toHaveAttribute(
+        'aria-pressed',
+        'true'
+      )
+    })
+
+    await test.step('Test Toolbar dropdown remembering last selection', async () => {
+      // Select another tool
+      await page.getByTestId('circle-center').click()
+
+      // center-rectangle should still be the active option in the rectangle dropdown
+      await expect(page.getByTestId('center-rectangle')).toBeVisible()
+    })
+  })
 })

e2e/playwright/feature-tree-pane.spec.ts

@@ -19,7 +19,7 @@ length001 = timesFive(1) * 5
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([20, 10], %)
   |> line(end = [10, 10])
-  |> angledLine([-45, length001], %)
+  |> angledLine(angle = -45, length = length001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 revolve001 = revolve(sketch001, axis = X)
@@ -38,15 +38,9 @@ extrude001 = extrude(sketch002, length = 10)
 
 const FEATURE_TREE_SKETCH_CODE = `sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine([0, 4], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       2
-     ], %, $rectangleSegmentB001)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %, $rectangleSegmentC001)
+  |> angledLine(angle = 0, length = 4, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2, tag = $rectangleSegmentB001)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close(%)
 extrude001 = extrude(sketch001, length = 10)
@@ -64,7 +58,7 @@ test.describe('Feature Tree pane', () => {
   test(
     'User can go to definition and go to function definition',
     { tag: '@electron' },
-    async ({ context, homePage, scene, editor, toolbar }) => {
+    async ({ context, homePage, scene, editor, toolbar, cmdBar, page }) => {
       await context.folderSetupFn(async (dir) => {
         const bracketDir = join(dir, 'test-sample')
         await fsp.mkdir(bracketDir, { recursive: true })
@@ -86,9 +80,13 @@ test.describe('Feature Tree pane', () => {
           sortBy: 'last-modified-desc',
         })
         await homePage.openProject('test-sample')
-        await scene.waitForExecutionDone()
-        await editor.closePane()
+        await scene.connectionEstablished()
+        await scene.settled(cmdBar)
+
         await toolbar.openFeatureTreePane()
+        await expect
+          .poll(() => page.getByText('Feature tree').count())
+          .toBeGreaterThan(1)
       })
 
       async function testViewSource({
@@ -254,7 +252,7 @@ test.describe('Feature Tree pane', () => {
         sortBy: 'last-modified-desc',
       })
       await homePage.openProject('test-sample')
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
       await toolbar.openFeatureTreePane()
     })
 
@@ -339,7 +337,7 @@ test.describe('Feature Tree pane', () => {
         sortBy: 'last-modified-desc',
       })
       await homePage.openProject('test-sample')
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
       await toolbar.openFeatureTreePane()
     })
 
@@ -414,8 +412,7 @@ profile003 = startProfileAt([0, -4.93], sketch001)
     const planeColor: [number, number, number] = [74, 74, 74]
 
     await homePage.openProject('test-sample')
-    // FIXME: @lf94 has a better way to verify execution completion, in a PR rn
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     await test.step(`Verify we see the sketch`, async () => {
       await scene.expectPixelColor(sketchColor, testPoint, 10)

e2e/playwright/file-tree.spec.ts

@@ -47,6 +47,7 @@ test.describe('integrations tests', () => {
         await scene.connectionEstablished()
         await scene.settled(cmdBar)
         await clickObj()
+        await page.waitForTimeout(1000)
         await scene.moveNoWhere()
         await editor.expectState({
           activeLines: [
@@ -72,11 +73,11 @@ test.describe('integrations tests', () => {
       })
       await test.step('setup for next assertion', async () => {
         await toolbar.openFile('main.kcl')
-
-        await scene.settled(cmdBar)
-
+        await page.waitForTimeout(1000)
         await clickObj()
+        await page.waitForTimeout(1000)
         await scene.moveNoWhere()
+        await page.waitForTimeout(1000)
         await editor.expectState({
           activeLines: [
             '|>startProfileAt([75.8,317.2],%)//[$startCapTag,$EndCapTag]',
@@ -89,7 +90,7 @@ test.describe('integrations tests', () => {
         await toolbar.expectFileTreeState(['main.kcl', fileName])
       })
       await test.step('check sketch mode is exited when opening a different file', async () => {
-        await toolbar.openFile(fileName, { wait: false })
+        await toolbar.openFile(fileName)
 
         // check we're out of sketch mode
         await expect(toolbar.exitSketchBtn).not.toBeVisible()

e2e/playwright/fixtures/cmdBarFixture.ts

@@ -112,22 +112,16 @@ export class CmdBarFixture {
    * and assumes we are past the `pickCommand` step.
    */
   progressCmdBar = async (shouldFuzzProgressMethod = true) => {
-    // FIXME: Progressing the command bar is a race condition. We have an async useEffect that reports the final state via useCalculateKclExpression. If this does not run quickly enough, it will not "fail" the continue because you can press continue if the state is not ready. E2E tests do not know this.
-    // Wait 1250ms to assume the await executeAst of the KCL input field is finished
-    await this.page.waitForTimeout(1250)
-    if (shouldFuzzProgressMethod || Math.random() > 0.5) {
-      const arrowButton = this.page.getByRole('button', {
-        name: 'arrow right Continue',
-      })
-      if (await arrowButton.isVisible()) {
-        await arrowButton.click()
-      } else {
-        await this.page
-          .getByRole('button', { name: 'checkmark Submit command' })
-          .click()
-      }
+    await this.page.waitForTimeout(2000)
+    const arrowButton = this.page.getByRole('button', {
+      name: 'arrow right Continue',
+    })
+    if (await arrowButton.isVisible()) {
+      await arrowButton.click()
     } else {
-      await this.page.keyboard.press('Enter')
+      await this.page
+        .getByRole('button', { name: 'checkmark Submit command' })
+        .click()
     }
   }
 

e2e/playwright/fixtures/fixtureSetup.ts

@@ -39,7 +39,8 @@ export class AuthenticatedApp {
   }
 
   async initialise(code = '') {
-    await setup(this.context, this.page, this.testInfo)
+    const testDir = this.testInfo.outputPath('electron-test-projects-dir')
+    await setup(this.context, this.page, testDir, this.testInfo)
     const u = await getUtils(this.page)
 
     await this.page.addInitScript(async (code) => {
@@ -102,11 +103,11 @@ export class ElectronZoo {
             return resolve(undefined)
           }
 
-          if (Date.now() - timeA > 10000) {
+          if (Date.now() - timeA > 3000) {
             return resolve(undefined)
           }
 
-          setTimeout(checkDisconnected, 0)
+          setTimeout(checkDisconnected, 1)
         }
         checkDisconnected()
       })
@@ -128,11 +129,9 @@ export class ElectronZoo {
     const that = this
 
     const options = {
-      timeout: 120000,
       args: ['.', '--no-sandbox'],
       env: {
         ...process.env,
-        TEST_SETTINGS_FILE_KEY: this.projectDirName,
         IS_PLAYWRIGHT: 'true',
       },
       ...(process.env.ELECTRON_OVERRIDE_DIST_PATH
@@ -200,7 +199,14 @@ export class ElectronZoo {
 
     await this.context.tracing.startChunk()
 
-    await setup(this.context, this.page, testInfo)
+    // THIS IS ABSOLUTELY NECESSARY TO CHANGE THE PROJECT DIRECTORY BETWEEN
+    // TESTS BECAUSE OF THE ELECTRON INSTANCE REUSE.
+    await this.electron?.evaluate(({ app }, projectDirName) => {
+      // @ts-ignore can't declaration merge see main.ts
+      app.testProperty['TEST_SETTINGS_FILE_KEY'] = projectDirName
+    }, this.projectDirName)
+
+    await setup(this.context, this.page, this.projectDirName, testInfo)
 
     await this.cleanProjectDir()
 
@@ -250,11 +256,6 @@ export class ElectronZoo {
     //   return app.reuseWindowForTest();
     // });
 
-    await this.electron?.evaluate(({ app }, projectDirName) => {
-      // @ts-ignore can't declaration merge see main.ts
-      app.testProperty['TEST_SETTINGS_FILE_KEY'] = projectDirName
-    }, this.projectDirName)
-
     // Always start at the root view
     await this.page.goto(this.firstUrl)
 
@@ -278,8 +279,9 @@ export class ElectronZoo {
       // Not a problem if it already exists.
     }
 
-    const tempSettingsFilePath = path.join(
+    const tempSettingsFilePath = path.resolve(
       this.projectDirName,
+      '..',
       SETTINGS_FILE_NAME
     )
 

e2e/playwright/fixtures/sceneFixture.ts

@@ -43,21 +43,15 @@ type DragFromHandler = (
 export class SceneFixture {
   public page: Page
   public streamWrapper!: Locator
-  public loadingIndicator!: Locator
   public networkToggleConnected!: Locator
   public startEditSketchBtn!: Locator
 
-  get exeIndicator() {
-    return this.page
-      .getByTestId('model-state-indicator-execution-done')
-      .or(this.page.getByTestId('model-state-indicator-receive-reliable'))
-  }
-
   constructor(page: Page) {
     this.page = page
     this.streamWrapper = page.getByTestId('stream')
-    this.networkToggleConnected = page.getByTestId('network-toggle-ok')
-    this.loadingIndicator = this.streamWrapper.getByTestId('loading')
+    this.networkToggleConnected = page
+      .getByTestId('network-toggle-ok')
+      .or(page.getByTestId('network-toggle-other'))
     this.startEditSketchBtn = page
       .getByRole('button', { name: 'Start Sketch' })
       .or(page.getByRole('button', { name: 'Edit Sketch' }))
@@ -231,10 +225,6 @@ export class SceneFixture {
     }
   }
 
-  waitForExecutionDone = async () => {
-    await expect(this.exeIndicator).toBeVisible({ timeout: 30000 })
-  }
-
   connectionEstablished = async () => {
     const timeout = 30000
     await expect(this.networkToggleConnected).toBeVisible({ timeout })
@@ -243,6 +233,9 @@ export class SceneFixture {
   settled = async (cmdBar: CmdBarFixture) => {
     const u = await getUtils(this.page)
 
+    await expect(this.startEditSketchBtn).not.toBeDisabled()
+    await expect(this.startEditSketchBtn).toBeVisible()
+
     await cmdBar.openCmdBar()
     await cmdBar.chooseCommand('Settings · app · show debug panel')
     await cmdBar.selectOption({ name: 'on' }).click()
@@ -250,10 +243,6 @@ export class SceneFixture {
     await u.openDebugPanel()
     await u.expectCmdLog('[data-message-type="execution-done"]')
     await u.closeDebugPanel()
-
-    await this.waitForExecutionDone()
-    await expect(this.startEditSketchBtn).not.toBeDisabled()
-    await expect(this.startEditSketchBtn).toBeVisible()
   }
 
   expectPixelColor = async (

e2e/playwright/fixtures/toolbarFixture.ts

@@ -44,6 +44,7 @@ export class ToolbarFixture {
   featureTreePane!: Locator
   gizmo!: Locator
   gizmoDisabled!: Locator
+  insertButton!: Locator
 
   constructor(page: Page) {
     this.page = page
@@ -78,18 +79,14 @@ export class ToolbarFixture {
     // element or two different elements can represent these states.
     this.gizmo = page.getByTestId('gizmo')
     this.gizmoDisabled = page.getByTestId('gizmo-disabled')
+
+    this.insertButton = page.getByTestId('insert-pane-button')
   }
 
   get logoLink() {
     return this.page.getByTestId('app-logo')
   }
 
-  get exeIndicator() {
-    return this.page
-      .getByTestId('model-state-indicator-receive-reliable')
-      .or(this.page.getByTestId('model-state-indicator-execution-done'))
-  }
-
   startSketchPlaneSelection = async () =>
     doAndWaitForImageDiff(this.page, () => this.startSketchBtn.click(), 500)
 
@@ -165,20 +162,14 @@ export class ToolbarFixture {
     }
   }
   /**
-   * Opens file by it's name and waits for execution to finish
+   * Opens file by it's name
    */
-  openFile = async (
-    fileName: string,
-    { wait }: { wait?: boolean } = { wait: true }
-  ) => {
+  openFile = async (fileName: string) => {
     await this.filePane.getByText(fileName).click()
-    if (wait) {
-      await expect(this.exeIndicator).toBeVisible({ timeout: 15_000 })
-    }
   }
   selectCenterRectangle = async () => {
     await this.page
-      .getByRole('button', { name: 'caret down Corner rectangle:' })
+      .getByRole('button', { name: 'caret down rectangles:' })
       .click()
     await expect(
       this.page.getByTestId('dropdown-center-rectangle')
@@ -187,7 +178,7 @@ export class ToolbarFixture {
   }
   selectBoolean = async (operation: 'union' | 'subtract' | 'intersect') => {
     await this.page
-      .getByRole('button', { name: 'caret down Union: open menu' })
+      .getByRole('button', { name: 'caret down booleans: open menu' })
       .click()
     const operationTestId = `dropdown-boolean-${operation}`
     await expect(this.page.getByTestId(operationTestId)).toBeVisible()
@@ -195,25 +186,19 @@ export class ToolbarFixture {
   }
 
   selectCircleThreePoint = async () => {
-    await this.page
-      .getByRole('button', { name: 'caret down Center circle:' })
-      .click()
+    await this.page.getByRole('button', { name: 'caret down circles:' }).click()
     await expect(
       this.page.getByTestId('dropdown-circle-three-points')
     ).toBeVisible()
     await this.page.getByTestId('dropdown-circle-three-points').click()
   }
   selectArc = async () => {
-    await this.page
-      .getByRole('button', { name: 'caret down Tangential Arc:' })
-      .click()
+    await this.page.getByRole('button', { name: 'caret down arcs:' }).click()
     await expect(this.page.getByTestId('dropdown-arc')).toBeVisible()
     await this.page.getByTestId('dropdown-arc').click()
   }
   selectThreePointArc = async () => {
-    await this.page
-      .getByRole('button', { name: 'caret down Tangential Arc:' })
-      .click()
+    await this.page.getByRole('button', { name: 'caret down arcs:' }).click()
     await expect(
       this.page.getByTestId('dropdown-three-point-arc')
     ).toBeVisible()

e2e/playwright/import-ui.spec.ts

@@ -10,6 +10,7 @@ test.describe('Import UI tests', () => {
     toolbar,
     scene,
     editor,
+    cmdBar,
   }) => {
     await context.folderSetupFn(async (dir) => {
       const projectDir = path.join(dir, 'import-test')
@@ -20,15 +21,9 @@ test.describe('Import UI tests', () => {
         path.join(projectDir, 'toBeImported.kcl'),
         `sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([281.54, 305.81], sketch001)
-  |> angledLine([0, 123.43], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       85.99
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %)
+  |> angledLine(angle = 0, length = 123.43, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 85.99)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 extrude(profile001, length = 100)`
@@ -43,15 +38,9 @@ importedCube
 
 sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([-134.53, -56.17], sketch001)
-  |> angledLine([0, 79.05], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       76.28
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %, $seg01)
+  |> angledLine(angle = 0, length = 79.05, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 76.28)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $seg01)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
   |> close()
 extrude001 = extrude(profile001, length = 100)
@@ -61,7 +50,7 @@ sketch002 = startSketchOn(extrude001, seg01)`
     })
 
     await homePage.openProject('import-test')
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     await scene.moveCameraTo(
       {

e2e/playwright/machines.spec.ts

@@ -7,7 +7,7 @@ import { expect, test } from '@e2e/playwright/zoo-test'
 test(
   'When machine-api server not found butt is disabled and shows the reason',
   { tag: '@electron' },
-  async ({ context, page }, testInfo) => {
+  async ({ context, page, scene, cmdBar }, testInfo) => {
     await context.folderSetupFn(async (dir) => {
       const bracketDir = join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
@@ -23,10 +23,7 @@ test(
 
     await page.getByText('bracket').click()
 
-    await expect(page.getByTestId('loading')).toBeAttached()
-    await expect(page.getByTestId('loading')).not.toBeAttached({
-      timeout: 20_000,
-    })
+    await scene.settled(cmdBar)
 
     const notFoundText = 'Machine API server was not discovered'
     await expect(page.getByText(notFoundText).first()).not.toBeVisible()
@@ -47,7 +44,7 @@ test(
 test(
   'When machine-api server not found home screen & project status shows the reason',
   { tag: '@electron' },
-  async ({ context, page }, testInfo) => {
+  async ({ context, page, scene, cmdBar }, testInfo) => {
     await context.folderSetupFn(async (dir) => {
       const bracketDir = join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
@@ -71,10 +68,7 @@ test(
 
     await page.getByText('bracket').click()
 
-    await expect(page.getByTestId('loading')).toBeAttached()
-    await expect(page.getByTestId('loading')).not.toBeAttached({
-      timeout: 20_000,
-    })
+    await scene.settled(cmdBar)
 
     await expect(page.getByText(notFoundText).nth(1)).not.toBeVisible()
 

e2e/playwright/named-views.spec.ts

@@ -61,6 +61,7 @@ function tomlStringOverWriteNamedViewUuids(toml: string): string {
 }
 
 test.describe('Named view tests', () => {
+  test.skip() // TODO: Jace is working on these
   test('Verify project.toml is not created', async ({ page }, testInfo) => {
     // Create project and load it
     const projectName = 'named-views'
@@ -88,7 +89,7 @@ test.describe('Named view tests', () => {
 
     // Create and load project
     await createProject({ name: projectName, page })
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // Create named view
     const projectDirName = testInfo.outputPath('electron-test-projects-dir')
@@ -110,14 +111,17 @@ test.describe('Named view tests', () => {
       expect(exists).toBe(true)
     }).toPass()
 
-    // Read project.toml into memory
-    let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
-    // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
-    tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+    await expect(async () => {
+      // Read project.toml into memory
+      let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
 
-    // Write the entire tomlString to a snapshot.
-    // There are many key/value pairs to check this is a safer match.
-    expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
+      // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
+      tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+
+      // Write the entire tomlString to a snapshot.
+      // There are many key/value pairs to check this is a safer match.
+      expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
+    }).toPass()
   })
   test('Verify named view gets deleted', async ({
     cmdBar,
@@ -130,7 +134,7 @@ test.describe('Named view tests', () => {
 
     // Create project and go into the project
     await createProject({ name: projectName, page })
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // Create a new named view
     await cmdBar.openCmdBar()
@@ -152,14 +156,16 @@ test.describe('Named view tests', () => {
       expect(exists).toBe(true)
     }).toPass()
 
-    // Read project.toml into memory
-    let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
-    // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
-    tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+    await expect(async () => {
+      // Read project.toml into memory
+      let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
+      // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
+      tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
 
-    // Write the entire tomlString to a snapshot.
-    // There are many key/value pairs to check this is a safer match.
-    expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
+      // Write the entire tomlString to a snapshot.
+      // There are many key/value pairs to check this is a safer match.
+      expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
+    }).toPass()
 
     // Delete a named view
     await cmdBar.openCmdBar()
@@ -167,14 +173,16 @@ test.describe('Named view tests', () => {
     cmdBar.selectOption({ name: myNamedView2 })
     await cmdBar.progressCmdBar(false)
 
-    // Read project.toml into memory again since we deleted a named view
-    tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
-    // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
-    tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+    await expect(async () => {
+      // Read project.toml into memory again since we deleted a named view
+      let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
+      // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
+      tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
 
-    // // Write the entire tomlString to a snapshot.
-    // // There are many key/value pairs to check this is a safer match.
-    expect(tomlString).toMatchSnapshot('verify-named-view-gets-deleted')
+      // // Write the entire tomlString to a snapshot.
+      // // There are many key/value pairs to check this is a safer match.
+      expect(tomlString).toMatchSnapshot('verify-named-view-gets-deleted')
+    }).toPass()
   })
   test('Verify named view gets loaded', async ({
     cmdBar,
@@ -186,7 +194,7 @@ test.describe('Named view tests', () => {
 
     // Create project and go into the project
     await createProject({ name: projectName, page })
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // Create a new named view
     await cmdBar.openCmdBar()
@@ -208,14 +216,16 @@ test.describe('Named view tests', () => {
       expect(exists).toBe(true)
     }).toPass()
 
-    // Read project.toml into memory
-    let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
-    // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
-    tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+    await expect(async () => {
+      // Read project.toml into memory
+      let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
+      // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
+      tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
 
-    // Write the entire tomlString to a snapshot.
-    // There are many key/value pairs to check this is a safer match.
-    expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
+      // Write the entire tomlString to a snapshot.
+      // There are many key/value pairs to check this is a safer match.
+      expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
+    }).toPass()
 
     // Create a load a named view
     await cmdBar.openCmdBar()
@@ -239,7 +249,7 @@ test.describe('Named view tests', () => {
 
     // Create and load project
     await createProject({ name: projectName, page })
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // Create named view
     const projectDirName = testInfo.outputPath('electron-test-projects-dir')
@@ -282,13 +292,15 @@ test.describe('Named view tests', () => {
       expect(exists).toBe(true)
     }).toPass()
 
-    // Read project.toml into memory
-    let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
-    // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
-    tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+    await expect(async () => {
+      // Read project.toml into memory
+      let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
+      // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
+      tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
 
-    // Write the entire tomlString to a snapshot.
-    // There are many key/value pairs to check this is a safer match.
-    expect(tomlString).toMatchSnapshot('verify-two-named-view-gets-created')
+      // Write the entire tomlString to a snapshot.
+      // There are many key/value pairs to check this is a safer match.
+      expect(tomlString).toMatchSnapshot('verify-two-named-view-gets-created')
+    }).toPass()
   })
 })

e2e/playwright/named-views.spec.ts-snapshots/verify-named-view-gets-created-chromium-darwin

@@ -0,0 +1,16 @@
+[settings]
+modeling = { }
+text_editor = { }
+command_bar = { }
+
+[settings.app.named_views.0656fb1a-9640-473e-b334-591dc70c0138]
+name = "uuid1"
+eye_offset = 1_378.0059
+fov_y = 45
+is_ortho = false
+ortho_scale_enabled = true
+ortho_scale_factor = 1.6
+pivot_position = [ 0, 0, 0 ]
+pivot_rotation = [ 0.5380994, 0.0, 0.0, 0.8428814 ]
+world_coord_system = "right_handed_up_z"
+version = 1

e2e/playwright/named-views.spec.ts-snapshots/verify-two-named-view-gets-created-chromium-darwin

@@ -0,0 +1,28 @@
+[settings]
+modeling = { }
+text_editor = { }
+command_bar = { }
+
+[settings.app.named_views.0656fb1a-9640-473e-b334-591dc70c0138]
+name = "uuid1"
+eye_offset = 1_378.0059
+fov_y = 45
+is_ortho = false
+ortho_scale_enabled = true
+ortho_scale_factor = 1.6
+pivot_position = [ 0, 0, 0 ]
+pivot_rotation = [ 0.5380994, 0.0, 0.0, 0.8428814 ]
+world_coord_system = "right_handed_up_z"
+version = 1
+
+[settings.app.named_views.c810cf04-c6cc-4a4a-8b11-17bf445dcab7]
+name = "uuid2"
+eye_offset = 1_378.0059
+fov_y = 45
+is_ortho = false
+ortho_scale_enabled = true
+ortho_scale_factor = 1.6
+pivot_position = [ 1_826.5239, 0.0, 0.0 ]
+pivot_rotation = [ 0.5380994, 0.0, 0.0, 0.8428814 ]
+world_coord_system = "right_handed_up_z"
+version = 1

e2e/playwright/point-click-assemblies.spec.ts

@@ -0,0 +1,292 @@
+import * as fsp from 'fs/promises'
+import path from 'path'
+
+import type { CmdBarFixture } from '@e2e/playwright/fixtures/cmdBarFixture'
+import type { ToolbarFixture } from '@e2e/playwright/fixtures/toolbarFixture'
+import {
+  executorInputPath,
+  getUtils,
+  testsInputPath,
+} from '@e2e/playwright/test-utils'
+import { expect, test } from '@e2e/playwright/zoo-test'
+import type { Page } from '@playwright/test'
+
+async function insertPartIntoAssembly(
+  path: string,
+  alias: string,
+  toolbar: ToolbarFixture,
+  cmdBar: CmdBarFixture,
+  page: Page
+) {
+  await toolbar.insertButton.click()
+  await cmdBar.selectOption({ name: path }).click()
+  await cmdBar.expectState({
+    stage: 'arguments',
+    currentArgKey: 'localName',
+    currentArgValue: '',
+    headerArguments: { Path: path, LocalName: '' },
+    highlightedHeaderArg: 'localName',
+    commandName: 'Insert',
+  })
+  await page.keyboard.insertText(alias)
+  await cmdBar.progressCmdBar()
+  await cmdBar.expectState({
+    stage: 'review',
+    headerArguments: { Path: path, LocalName: alias },
+    commandName: 'Insert',
+  })
+  await cmdBar.progressCmdBar()
+}
+
+// test file is for testing point an click code gen functionality that's assemblies related
+test.describe('Point-and-click assemblies tests', () => {
+  test(
+    `Insert kcl parts into assembly as whole module import`,
+    { tag: ['@electron'] },
+    async ({
+      context,
+      page,
+      homePage,
+      scene,
+      editor,
+      toolbar,
+      cmdBar,
+      tronApp,
+    }) => {
+      if (!tronApp) {
+        fail()
+      }
+
+      const midPoint = { x: 500, y: 250 }
+      const partPoint = { x: midPoint.x + 30, y: midPoint.y - 30 } // mid point, just off top right
+      const defaultPlanesColor: [number, number, number] = [180, 220, 180]
+      const partColor: [number, number, number] = [100, 100, 100]
+      const tolerance = 50
+      const u = await getUtils(page)
+      const gizmo = page.locator('[aria-label*=gizmo]')
+      const resetCameraButton = page.getByRole('button', { name: 'Reset view' })
+
+      await test.step('Setup parts and expect empty assembly scene', async () => {
+        const projectName = 'assembly'
+        await context.folderSetupFn(async (dir) => {
+          const bracketDir = path.join(dir, projectName)
+          await fsp.mkdir(bracketDir, { recursive: true })
+          await Promise.all([
+            fsp.copyFile(
+              executorInputPath('cylinder.kcl'),
+              path.join(bracketDir, 'cylinder.kcl')
+            ),
+            fsp.copyFile(
+              executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
+              path.join(bracketDir, 'bracket.kcl')
+            ),
+            fsp.copyFile(
+              testsInputPath('cube.step'),
+              path.join(bracketDir, 'cube.step')
+            ),
+            fsp.writeFile(path.join(bracketDir, 'main.kcl'), ''),
+          ])
+        })
+        await page.setBodyDimensions({ width: 1000, height: 500 })
+        await homePage.openProject(projectName)
+        await scene.settled(cmdBar)
+        await toolbar.closePane('code')
+        await scene.expectPixelColor(defaultPlanesColor, midPoint, tolerance)
+      })
+
+      await test.step('Insert kcl as first part as module', async () => {
+        await insertPartIntoAssembly(
+          'cylinder.kcl',
+          'cylinder',
+          toolbar,
+          cmdBar,
+          page
+        )
+        await toolbar.openPane('code')
+        await editor.expectEditor.toContain(
+          `
+        import "cylinder.kcl" as cylinder
+        cylinder
+      `,
+          { shouldNormalise: true }
+        )
+        await scene.settled(cmdBar)
+
+        // Check scene for changes
+        await toolbar.closePane('code')
+        await u.doAndWaitForCmd(async () => {
+          await gizmo.click({ button: 'right' })
+          await resetCameraButton.click()
+        }, 'zoom_to_fit')
+        await toolbar.closePane('debug')
+        await scene.expectPixelColor(partColor, partPoint, tolerance)
+        await toolbar.openPane('code')
+      })
+
+      await test.step('Insert kcl second part as module', async () => {
+        await insertPartIntoAssembly(
+          'bracket.kcl',
+          'bracket',
+          toolbar,
+          cmdBar,
+          page
+        )
+        await editor.expectEditor.toContain(
+          `
+        import "cylinder.kcl" as cylinder
+        import "bracket.kcl" as bracket
+        cylinder
+        bracket
+      `,
+          { shouldNormalise: true }
+        )
+        await scene.settled(cmdBar)
+      })
+
+      await test.step('Insert a second time and expect error', async () => {
+        // TODO: revisit once we have clone with #6209
+        await insertPartIntoAssembly(
+          'bracket.kcl',
+          'bracket',
+          toolbar,
+          cmdBar,
+          page
+        )
+        await editor.expectEditor.toContain(
+          `
+        import "cylinder.kcl" as cylinder
+        import "bracket.kcl" as bracket
+        import "bracket.kcl" as bracket
+        cylinder
+        bracket
+        bracket
+      `,
+          { shouldNormalise: true }
+        )
+        await scene.settled(cmdBar)
+        await expect(page.locator('.cm-lint-marker-error')).toBeVisible()
+      })
+    }
+  )
+
+  test(
+    `Insert foreign parts into assembly as whole module import`,
+    { tag: ['@electron'] },
+    async ({
+      context,
+      page,
+      homePage,
+      scene,
+      editor,
+      toolbar,
+      cmdBar,
+      tronApp,
+    }) => {
+      if (!tronApp) {
+        fail()
+      }
+
+      const midPoint = { x: 500, y: 250 }
+      const partPoint = { x: midPoint.x + 30, y: midPoint.y - 30 } // mid point, just off top right
+      const defaultPlanesColor: [number, number, number] = [180, 220, 180]
+      const partColor: [number, number, number] = [150, 150, 150]
+      const tolerance = 50
+
+      const complexPlmFileName = 'cube_Complex-PLM_Name_-001.sldprt'
+      const camelCasedSolidworksFileName = 'cubeComplexPLMName001'
+
+      await test.step('Setup parts and expect empty assembly scene', async () => {
+        const projectName = 'assembly'
+        await context.folderSetupFn(async (dir) => {
+          const bracketDir = path.join(dir, projectName)
+          await fsp.mkdir(bracketDir, { recursive: true })
+          await Promise.all([
+            fsp.copyFile(
+              testsInputPath('cube.step'),
+              path.join(bracketDir, 'cube.step')
+            ),
+            fsp.copyFile(
+              testsInputPath('cube.sldprt'),
+              path.join(bracketDir, complexPlmFileName)
+            ),
+            fsp.writeFile(path.join(bracketDir, 'main.kcl'), ''),
+          ])
+        })
+        await page.setBodyDimensions({ width: 1000, height: 500 })
+        await homePage.openProject(projectName)
+        await scene.settled(cmdBar)
+        await toolbar.closePane('code')
+        await scene.expectPixelColor(defaultPlanesColor, midPoint, tolerance)
+      })
+
+      await test.step('Insert step part as module', async () => {
+        await insertPartIntoAssembly('cube.step', 'cube', toolbar, cmdBar, page)
+        await toolbar.openPane('code')
+        await editor.expectEditor.toContain(
+          `
+        import "cube.step" as cube
+        cube
+      `,
+          { shouldNormalise: true }
+        )
+        await scene.settled(cmdBar)
+
+        // TODO: remove this once #5780 is fixed
+        await page.reload()
+
+        await scene.settled(cmdBar)
+        await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
+        await toolbar.closePane('code')
+        await scene.expectPixelColor(partColor, partPoint, tolerance)
+      })
+
+      await test.step('Insert second step part by clicking', async () => {
+        await toolbar.openPane('files')
+        await toolbar.expectFileTreeState([
+          complexPlmFileName,
+          'cube.step',
+          'main.kcl',
+        ])
+        await toolbar.openFile(complexPlmFileName)
+
+        // Go through the ToastInsert prompt
+        await page.getByText('Insert into my current file').click()
+
+        // Check getPathFilenameInVariableCase output
+        const parsedValueFromFile =
+          await cmdBar.currentArgumentInput.inputValue()
+        expect(parsedValueFromFile).toEqual(camelCasedSolidworksFileName)
+
+        // Continue on with the flow
+        await page.keyboard.insertText('cubeSw')
+        await cmdBar.progressCmdBar()
+        await cmdBar.expectState({
+          stage: 'review',
+          headerArguments: { Path: complexPlmFileName, LocalName: 'cubeSw' },
+          commandName: 'Insert',
+        })
+        await cmdBar.progressCmdBar()
+        await toolbar.closePane('files')
+        await toolbar.openPane('code')
+        await editor.expectEditor.toContain(
+          `
+        import "cube.step" as cube
+        import "${complexPlmFileName}" as cubeSw
+        cube
+        cubeSw
+      `,
+          { shouldNormalise: true }
+        )
+        await scene.settled(cmdBar)
+
+        // TODO: remove this once #5780 is fixed
+        await page.reload()
+        await scene.settled(cmdBar)
+
+        await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
+        await toolbar.closePane('code')
+        await scene.expectPixelColor(partColor, partPoint, tolerance)
+      })
+    }
+  )
+})

e2e/playwright/point-click.spec.ts

@@ -5,13 +5,14 @@ import path from 'node:path'
 import type { EditorFixture } from '@e2e/playwright/fixtures/editorFixture'
 import type { SceneFixture } from '@e2e/playwright/fixtures/sceneFixture'
 import type { ToolbarFixture } from '@e2e/playwright/fixtures/toolbarFixture'
-import { getUtils, orRunWhenFullSuiteEnabled } from '@e2e/playwright/test-utils'
+import { orRunWhenFullSuiteEnabled } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
 
 // test file is for testing point an click code gen functionality that's not sketch mode related
 
 test.describe('Point-and-click tests', () => {
   test('verify extruding circle works', async ({
+    page,
     context,
     homePage,
     cmdBar,
@@ -30,8 +31,9 @@ test.describe('Point-and-click tests', () => {
     await context.addInitScript((file) => {
       localStorage.setItem('persistCode', file)
     }, file)
+
     await homePage.goToModelingScene()
-    await scene.waitForExecutionDone()
+    await scene.connectionEstablished()
 
     const [clickCircle, moveToCircle] = scene.makeMouseHelpers(582, 217)
 
@@ -72,7 +74,6 @@ test.describe('Point-and-click tests', () => {
 
     await test.step('do extrude flow and check extrude code is added to editor', async () => {
       await toolbar.extrudeButton.click()
-
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'distance',
@@ -186,6 +187,7 @@ test.describe('Point-and-click tests', () => {
       editor,
       toolbar,
       scene,
+      cmdBar,
     }) => {
       const file = await fs.readFile(
         path.resolve(
@@ -200,9 +202,7 @@ test.describe('Point-and-click tests', () => {
       }, file)
       await page.setBodyDimensions({ width: 1000, height: 500 })
       await homePage.goToModelingScene()
-      await expect(
-        page.getByTestId('model-state-indicator-receive-reliable')
-      ).toBeVisible()
+      await scene.settled(cmdBar)
 
       const sketchOnAChamfer = _sketchOnAChamfer(page, editor, toolbar, scene)
 
@@ -210,7 +210,7 @@ test.describe('Point-and-click tests', () => {
         clickCoords: { x: 570, y: 220 },
         cameraPos: { x: 16020, y: -2000, z: 10500 },
         cameraTarget: { x: -150, y: -4500, z: -80 },
-        beforeChamferSnippet: `angledLine([segAng(rectangleSegmentA001)-90,217.26],%,$seg01)
+        beforeChamferSnippet: `angledLine(angle=segAng(rectangleSegmentA001)-90,length=217.26,tag=$seg01)
       chamfer(length = 30,tags = [
       seg01,
       getNextAdjacentEdge(yo),
@@ -223,9 +223,9 @@ test.describe('Point-and-click tests', () => {
           'sketch002 = startSketchOn(extrude001, seg03)',
         afterRectangle1stClickSnippet:
           'startProfileAt([205.96, 254.59], sketch002)',
-        afterRectangle2ndClickSnippet: `angledLine([0,11.39],%,$rectangleSegmentA002)
-        |>angledLine([segAng(rectangleSegmentA002)-90,105.26],%)
-        |>angledLine([segAng(rectangleSegmentA002),-segLen(rectangleSegmentA002)],%)
+        afterRectangle2ndClickSnippet: `angledLine(angle=0,length=11.39,tag=$rectangleSegmentA002)
+        |>angledLine(angle=segAng(rectangleSegmentA002)-90,length=105.26)
+        |>angledLine(angle=segAng(rectangleSegmentA002),length=-segLen(rectangleSegmentA002))
         |>line(endAbsolute=[profileStartX(%),profileStartY(%)])
         |>close()`,
       })
@@ -234,10 +234,7 @@ test.describe('Point-and-click tests', () => {
         clickCoords: { x: 690, y: 250 },
         cameraPos: { x: 16020, y: -2000, z: 10500 },
         cameraTarget: { x: -150, y: -4500, z: -80 },
-        beforeChamferSnippet: `angledLine([
-         segAng(rectangleSegmentA001) - 90,
-         217.26
-       ], %, $seg01)chamfer(
+        beforeChamferSnippet: `angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 217.26, tag = $seg01)chamfer(
          length = 30,
          tags = [
            seg01,
@@ -250,9 +247,9 @@ test.describe('Point-and-click tests', () => {
           'sketch003 = startSketchOn(extrude001, seg04)',
         afterRectangle1stClickSnippet:
           'startProfileAt([-209.64, 255.28], sketch003)',
-        afterRectangle2ndClickSnippet: `angledLine([0,11.56],%,$rectangleSegmentA003)
-        |>angledLine([segAng(rectangleSegmentA003)-90,106.84],%)
-        |>angledLine([segAng(rectangleSegmentA003),-segLen(rectangleSegmentA003)],%)
+        afterRectangle2ndClickSnippet: `angledLine(angle=0,length=11.56,tag=$rectangleSegmentA003)
+        |>angledLine(angle=segAng(rectangleSegmentA003)-90,length=106.84)
+        |>angledLine(angle=segAng(rectangleSegmentA003),length=-segLen(rectangleSegmentA003))
         |>line(endAbsolute=[profileStartX(%),profileStartY(%)])
         |>close()`,
       })
@@ -261,7 +258,7 @@ test.describe('Point-and-click tests', () => {
         clickCoords: { x: 677, y: 87 },
         cameraPos: { x: -6200, y: 1500, z: 6200 },
         cameraTarget: { x: 8300, y: 1100, z: 4800 },
-        beforeChamferSnippet: `angledLine([0, 268.43], %, $rectangleSegmentA001)chamfer(
+        beforeChamferSnippet: `angledLine(angle = 0, length = 268.43, tag = $rectangleSegmentA001)chamfer(
          length = 30,
          tags = [
            getNextAdjacentEdge(yo),
@@ -272,9 +269,9 @@ test.describe('Point-and-click tests', () => {
           'sketch004 = startSketchOn(extrude001, seg05)',
         afterRectangle1stClickSnippet:
           'startProfileAt([82.57, 322.96], sketch004)',
-        afterRectangle2ndClickSnippet: `angledLine([0,11.16],%,$rectangleSegmentA004)
-        |>angledLine([segAng(rectangleSegmentA004)-90,103.07],%)
-        |>angledLine([segAng(rectangleSegmentA004),-segLen(rectangleSegmentA004)],%)
+        afterRectangle2ndClickSnippet: `angledLine(angle=0,length=11.16,tag=$rectangleSegmentA004)
+        |>angledLine(angle=segAng(rectangleSegmentA004)-90,length=103.07)
+        |>angledLine(angle=segAng(rectangleSegmentA004),length=-segLen(rectangleSegmentA004))
         |>line(endAbsolute=[profileStartX(%),profileStartY(%)])
         |>close()`,
       })
@@ -290,9 +287,9 @@ test.describe('Point-and-click tests', () => {
           'sketch005 = startSketchOn(extrude001, seg06)',
         afterRectangle1stClickSnippet:
           'startProfileAt([-23.43, 19.69], sketch005)',
-        afterRectangle2ndClickSnippet: `angledLine([0,9.1],%,$rectangleSegmentA005)
-        |>angledLine([segAng(rectangleSegmentA005)-90,84.07],%)
-        |>angledLine([segAng(rectangleSegmentA005),-segLen(rectangleSegmentA005)],%)
+        afterRectangle2ndClickSnippet: `angledLine(angle=0,length=9.1,tag=$rectangleSegmentA005)
+        |>angledLine(angle=segAng(rectangleSegmentA005)-90,length=84.07)
+        |>angledLine(angle=segAng(rectangleSegmentA005),length=-segLen(rectangleSegmentA005))
         |>line(endAbsolute=[profileStartX(%),profileStartY(%)])
         |>close()`,
       })
@@ -302,15 +299,9 @@ test.describe('Point-and-click tests', () => {
           `@settings(defaultLengthUnit = in)
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
-  |> angledLine([0, 268.43], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       217.26
-     ], %, $seg01)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %, $yo)
+  |> angledLine(angle = 0, length = 268.43, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 217.26, tag = $seg01)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $yo)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
   |> close()
 extrude001 = extrude(sketch001, length = 100)
@@ -320,48 +311,30 @@ extrude001 = extrude(sketch001, length = 100)
   |> chamfer(length = 30, tags = [getNextAdjacentEdge(yo)], tag = $seg06)
 sketch005 = startSketchOn(extrude001, seg06)
 profile004=startProfileAt([-23.43,19.69], sketch005)
-  |> angledLine([0, 9.1], %, $rectangleSegmentA005)
-  |> angledLine([segAng(rectangleSegmentA005) - 90, 84.07], %)
-  |> angledLine([segAng(rectangleSegmentA005), -segLen(rectangleSegmentA005)], %)
+  |> angledLine(angle = 0, length = 9.1, tag = $rectangleSegmentA005)
+  |> angledLine(angle = segAng(rectangleSegmentA005) - 90, length = 84.07)
+  |> angledLine(angle = segAng(rectangleSegmentA005), length = -segLen(rectangleSegmentA005))
   |> line(endAbsolute=[profileStartX(%), profileStartY(%)])
   |> close()
 sketch004 = startSketchOn(extrude001, seg05)
 profile003 = startProfileAt([82.57, 322.96], sketch004)
-  |> angledLine([0, 11.16], %, $rectangleSegmentA004)
-  |> angledLine([
-       segAng(rectangleSegmentA004) - 90,
-       103.07
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA004),
-       -segLen(rectangleSegmentA004)
-     ], %)
+  |> angledLine(angle = 0, length = 11.16, tag = $rectangleSegmentA004)
+  |> angledLine(angle = segAng(rectangleSegmentA004) - 90, length = 103.07)
+  |> angledLine(angle = segAng(rectangleSegmentA004), length = -segLen(rectangleSegmentA004))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 sketch003 = startSketchOn(extrude001, seg04)
 profile002 = startProfileAt([-209.64, 255.28], sketch003)
-  |> angledLine([0, 11.56], %, $rectangleSegmentA003)
-  |> angledLine([
-       segAng(rectangleSegmentA003) - 90,
-       106.84
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA003),
-       -segLen(rectangleSegmentA003)
-     ], %)
+  |> angledLine(angle = 0, length = 11.56, tag = $rectangleSegmentA003)
+  |> angledLine(angle = segAng(rectangleSegmentA003) - 90, length = 106.84)
+  |> angledLine(angle = segAng(rectangleSegmentA003), length = -segLen(rectangleSegmentA003))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 sketch002 = startSketchOn(extrude001, seg03)
 profile001 = startProfileAt([205.96, 254.59], sketch002)
-  |> angledLine([0, 11.39], %, $rectangleSegmentA002)
-  |> angledLine([
-       segAng(rectangleSegmentA002) - 90,
-       105.26
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA002),
-       -segLen(rectangleSegmentA002)
-     ], %)
+  |> angledLine(angle = 0, length = 11.39, tag = $rectangleSegmentA002)
+  |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 105.26)
+  |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 `,
@@ -377,6 +350,7 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
       editor,
       toolbar,
       scene,
+      cmdBar,
     }) => {
       const file = await fs.readFile(
         path.resolve(
@@ -392,7 +366,7 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
       await page.setBodyDimensions({ width: 1000, height: 500 })
       await homePage.goToModelingScene()
 
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
 
       const sketchOnAChamfer = _sketchOnAChamfer(page, editor, toolbar, scene)
 
@@ -400,7 +374,7 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
         clickCoords: { x: 570, y: 220 },
         cameraPos: { x: 16020, y: -2000, z: 10500 },
         cameraTarget: { x: -150, y: -4500, z: -80 },
-        beforeChamferSnippet: `angledLine([segAng(rectangleSegmentA001)-90,217.26],%,$seg01)
+        beforeChamferSnippet: `angledLine(angle=segAng(rectangleSegmentA001)-90,length=217.26,tag=$seg01)
       chamfer(extrude001,length=30,tags=[
       seg01,
       getNextAdjacentEdge(yo),
@@ -412,9 +386,9 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
           'sketch002 = startSketchOn(extrude001, seg03)',
         afterRectangle1stClickSnippet:
           'startProfileAt([205.96, 254.59], sketch002)',
-        afterRectangle2ndClickSnippet: `angledLine([0,11.39],%,$rectangleSegmentA002)
-        |>angledLine([segAng(rectangleSegmentA002)-90,105.26],%)
-        |>angledLine([segAng(rectangleSegmentA002),-segLen(rectangleSegmentA002)],%)
+        afterRectangle2ndClickSnippet: `angledLine(angle=0,length=11.39,tag=$rectangleSegmentA002)
+        |>angledLine(angle=segAng(rectangleSegmentA002)-90,length=105.26)
+        |>angledLine(angle=segAng(rectangleSegmentA002),length=-segLen(rectangleSegmentA002))
         |>line(endAbsolute=[profileStartX(%),profileStartY(%)])
         |>close()`,
       })
@@ -422,15 +396,9 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
         `@settings(defaultLengthUnit = in)
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([75.8, 317.2], %)
-  |> angledLine([0, 268.43], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       217.26
-     ], %, $seg01)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %, $yo)
+  |> angledLine(angle = 0, length = 268.43, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 217.26, tag = $seg01)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $yo)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
   |> close()
 extrude001 = extrude(sketch001, length = 100)
@@ -450,15 +418,9 @@ chamf = chamfer(
      )
 sketch002 = startSketchOn(extrude001, seg03)
 profile001 = startProfileAt([205.96, 254.59], sketch002)
-  |> angledLine([0, 11.39], %, $rectangleSegmentA002)
-  |> angledLine([
-       segAng(rectangleSegmentA002) - 90,
-       105.26
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA002),
-       -segLen(rectangleSegmentA002)
-     ], %)
+  |> angledLine(angle = 0, length = 11.39, tag = $rectangleSegmentA002)
+  |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 105.26)
+  |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 `,
@@ -479,6 +441,7 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
     await page.setBodyDimensions(viewPortSize)
 
     await homePage.goToModelingScene()
+    await scene.connectionEstablished()
 
     // Constants and locators
     // These are mappings from screenspace to KCL coordinates,
@@ -537,8 +500,7 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
       await toolbar.startSketchPlaneSelection()
       await moveToXzPlane()
       await clickOnXzPlane()
-      // timeout wait for engine animation is unavoidable
-      await page.waitForTimeout(600)
+      await toolbar.waitUntilSketchingReady()
       await editor.expectEditor.toContain(expectedCodeSnippets.sketchOnXzPlane)
     })
     await test.step(`Place a point a few pixels off the middle, verify it still snaps to 0,0`, async () => {
@@ -580,9 +542,8 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
     editor,
     toolbar,
     scene,
+    cmdBar,
   }) => {
-    const u = await getUtils(page)
-
     const initialCode = `closedSketch = startSketchOn(XZ)
   |> circle(center = [8, 5], radius = 2)
 openSketch = startSketchOn(XY)
@@ -599,8 +560,6 @@ openSketch = startSketchOn(XY)
     }, initialCode)
 
     await homePage.goToModelingScene()
-    await u.waitForPageLoad()
-    await page.waitForTimeout(1000)
 
     const pointInsideCircle = {
       x: viewPortSize.width * 0.63,
@@ -625,15 +584,16 @@ openSketch = startSketchOn(XY)
     const exitSketch = async () => {
       await test.step(`Exit sketch mode`, async () => {
         await toolbar.exitSketchBtn.click()
-        await expect(toolbar.exitSketchBtn).not.toBeVisible()
         await expect(toolbar.startSketchBtn).toBeEnabled()
       })
     }
 
     await test.step(`Double-click on the closed sketch`, async () => {
+      await scene.settled(cmdBar)
       await moveToCircle()
+      await page.waitForTimeout(1000)
       await dblClickCircle()
-      await expect(toolbar.startSketchBtn).not.toBeVisible()
+      await page.waitForTimeout(1000)
       await expect(toolbar.exitSketchBtn).toBeVisible()
       await editor.expectState({
         activeLines: [`|>circle(center=[8,5],radius=2)`],
@@ -670,7 +630,6 @@ openSketch = startSketchOn(XY)
       // There is a full execution after exiting sketch that clears the scene.
       await page.waitForTimeout(500)
       await dblClickOpenPath()
-      await expect(toolbar.startSketchBtn).not.toBeVisible()
       await expect(toolbar.exitSketchBtn).toBeVisible()
       // Wait for enter sketch mode to complete
       await page.waitForTimeout(500)
@@ -1031,6 +990,9 @@ openSketch = startSketchOn(XY)
     })
     await test.step(`Go through the command bar flow`, async () => {
       await toolbar.offsetPlaneButton.click()
+      await expect
+        .poll(() => page.getByText('Please select one').count())
+        .toBe(1)
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'plane',
@@ -1088,6 +1050,7 @@ openSketch = startSketchOn(XY)
     const expectedLine = `axis=X,`
 
     await homePage.goToModelingScene()
+    await scene.connectionEstablished()
 
     await test.step(`Go through the command bar flow`, async () => {
       await toolbar.helixButton.click()
@@ -1106,6 +1069,7 @@ openSketch = startSketchOn(XY)
         commandName: 'Helix',
       })
       await cmdBar.progressCmdBar()
+      await expect.poll(() => page.getByText('Axis').count()).toBe(6)
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
@@ -1233,6 +1197,7 @@ openSketch = startSketchOn(XY)
         }, initialCode)
         await page.setBodyDimensions({ width: 1000, height: 500 })
         await homePage.goToModelingScene()
+        await scene.settled(cmdBar)
 
         await test.step(`Go through the command bar flow`, async () => {
           await toolbar.closePane('code')
@@ -1252,15 +1217,22 @@ openSketch = startSketchOn(XY)
             commandName: 'Helix',
           })
           await cmdBar.selectOption({ name: 'Edge' }).click()
+          await expect
+            .poll(() => page.getByText('Please select one').count())
+            .toBe(1)
           await clickOnEdge()
+          await page.waitForTimeout(1000)
           await cmdBar.progressCmdBar()
+          await page.waitForTimeout(1000)
           await cmdBar.argumentInput.focus()
+          await page.waitForTimeout(1000)
           await page.keyboard.insertText('20')
           await cmdBar.progressCmdBar()
           await page.keyboard.insertText('0')
           await cmdBar.progressCmdBar()
           await page.keyboard.insertText('1')
           await cmdBar.progressCmdBar()
+          await page.keyboard.insertText('100')
           await cmdBar.expectState({
             stage: 'review',
             headerArguments: {
@@ -1274,6 +1246,7 @@ openSketch = startSketchOn(XY)
             commandName: 'Helix',
           })
           await cmdBar.progressCmdBar()
+          await page.waitForTimeout(1000)
         })
 
         await test.step(`Confirm code is added to the editor, scene has changed`, async () => {
@@ -1369,7 +1342,7 @@ extrude001 = extrude(profile001, length = 100)
     }, initialCode)
     await page.setBodyDimensions({ width: 1000, height: 500 })
     await homePage.goToModelingScene()
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // One dumb hardcoded screen pixel value
     const testPoint = { x: 620, y: 257 }
@@ -1530,6 +1503,9 @@ extrude001 = extrude(profile001, length = 100)
       if (!shouldPreselect) {
         await test.step(`Go through the command bar flow without preselected sketches`, async () => {
           await toolbar.loftButton.click()
+          await expect
+            .poll(() => page.getByText('Please select one').count())
+            .toBe(1)
           await cmdBar.expectState({
             stage: 'arguments',
             currentArgKey: 'selection',
@@ -1579,6 +1555,7 @@ extrude001 = extrude(profile001, length = 100)
     page,
     homePage,
     scene,
+    cmdBar,
   }) => {
     const initialCode = `sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 30)
@@ -1592,7 +1569,7 @@ loft001 = loft([sketch001, sketch002])
     }, initialCode)
     await page.setBodyDimensions({ width: 1000, height: 500 })
     await homePage.goToModelingScene()
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // One dumb hardcoded screen pixel value
     const testPoint = { x: 575, y: 200 }
@@ -1655,15 +1632,9 @@ sketch002 = startSketchOn(XZ)
       initialCode: `@settings(defaultLengthUnit = in)
 sketch001 = startSketchOn(YZ)
 profile001 = startProfileAt([-400, -400], sketch001)
-  |> angledLine([0, 800], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) + 90,
-       800
-     ], %)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %)
+  |> angledLine(angle = 0, length = 800, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = 800)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 sketch002 = startSketchOn(XZ)
@@ -1687,7 +1658,7 @@ sketch002 = startSketchOn(XZ)
       }, initialCode)
       await page.setBodyDimensions({ width: 1000, height: 500 })
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
 
       // One dumb hardcoded screen pixel value
       const [clickOnSketch1] = scene.makeMouseHelpers(testPoint.x, testPoint.y)
@@ -1707,6 +1678,9 @@ sketch002 = startSketchOn(XZ)
 
       await test.step(`Go through the command bar flow`, async () => {
         await toolbar.sweepButton.click()
+        await expect
+          .poll(() => page.getByText('Please select one').count())
+          .toBe(1)
         await cmdBar.expectState({
           commandName: 'Sweep',
           currentArgKey: 'target',
@@ -1826,7 +1800,7 @@ sketch002 = startSketchOn(XZ)
     }, initialCode)
     await page.setBodyDimensions({ width: 1000, height: 500 })
     await homePage.goToModelingScene()
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // One dumb hardcoded screen pixel value
     const testPoint = { x: 700, y: 250 }
@@ -1843,6 +1817,9 @@ sketch002 = startSketchOn(XZ)
 
     await test.step(`Go through the command bar flow and fail validation with a toast`, async () => {
       await toolbar.sweepButton.click()
+      await expect
+        .poll(() => page.getByText('Please select one').count())
+        .toBe(1)
       await cmdBar.expectState({
         commandName: 'Sweep',
         currentArgKey: 'target',
@@ -2059,6 +2036,9 @@ extrude001 = extrude(sketch001, length = -12)
     await test.step(`Open fillet UI without selecting edges`, async () => {
       await page.waitForTimeout(100)
       await toolbar.filletButton.click()
+      await expect
+        .poll(() => page.getByText('Please select one').count())
+        .toBe(1)
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'selection',
@@ -2184,6 +2164,7 @@ extrude001 = extrude(sketch001, length = -12)
     homePage,
     scene,
     toolbar,
+    cmdBar,
   }) => {
     const initialCode = `sketch001 = startSketchOn(XY)
 profile001 = circle(
@@ -2200,7 +2181,7 @@ fillet001 = fillet(extrude001, radius = 5, tags = [getOppositeEdge(seg01)])
     }, initialCode)
     await page.setBodyDimensions({ width: 1000, height: 500 })
     await homePage.goToModelingScene()
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     await test.step('Double-click in feature tree and expect error toast', async () => {
       await toolbar.openPane('feature-tree')
@@ -2521,7 +2502,7 @@ extrude001 = extrude(sketch001, length = -12)
       }, initialCode)
       await page.setBodyDimensions({ width: 1000, height: 500 })
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
     })
 
     // Test 1: Command bar flow with preselected edges
@@ -2554,6 +2535,7 @@ extrude001 = extrude(sketch001, length = -12)
         stage: 'arguments',
       })
       await cmdBar.progressCmdBar()
+      await page.waitForTimeout(1000)
       await cmdBar.expectState({
         commandName: 'Chamfer',
         highlightedHeaderArg: 'length',
@@ -2565,7 +2547,10 @@ extrude001 = extrude(sketch001, length = -12)
         },
         stage: 'arguments',
       })
+      await cmdBar.argumentInput.focus()
+      await page.waitForTimeout(1000)
       await cmdBar.progressCmdBar()
+      await page.waitForTimeout(1000)
       await cmdBar.expectState({
         commandName: 'Chamfer',
         headerArguments: {
@@ -2649,6 +2634,9 @@ extrude001 = extrude(sketch001, length = -12)
     await test.step(`Open chamfer UI without selecting edges`, async () => {
       await page.waitForTimeout(100)
       await toolbar.chamferButton.click()
+      await expect
+        .poll(() => page.getByText('Please select one').count())
+        .toBe(1)
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'selection',
@@ -2771,6 +2759,7 @@ extrude001 = extrude(sketch001, length = -12)
     scene,
     editor,
     toolbar,
+    cmdBar,
   }) => {
     // Code samples
     const initialCode = `@settings(defaultLengthUnit = in)
@@ -2814,7 +2803,7 @@ chamfer04 = chamfer(extrude001, length = 5, tags = [getOppositeEdge(seg02)])
       }, initialCode)
       await page.setBodyDimensions({ width: 1000, height: 500 })
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
 
       // verify modeling scene is loaded
       await scene.expectPixelColor(
@@ -2936,9 +2925,11 @@ extrude001 = extrude(sketch001, length = 30)
       await context.addInitScript((initialCode) => {
         localStorage.setItem('persistCode', initialCode)
       }, initialCode)
+
       await page.setBodyDimensions({ width: 1000, height: 500 })
+
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
+      await scene.connectionEstablished()
 
       // One dumb hardcoded screen pixel value
       const testPoint = { x: 575, y: 200 }
@@ -2955,6 +2946,9 @@ extrude001 = extrude(sketch001, length = 30)
       if (!shouldPreselect) {
         await test.step(`Go through the command bar flow without preselected faces`, async () => {
           await toolbar.shellButton.click()
+          await expect
+            .poll(() => page.getByText('Please select one').count())
+            .toBe(1)
           await cmdBar.expectState({
             stage: 'arguments',
             currentArgKey: 'selection',
@@ -3015,7 +3009,6 @@ extrude001 = extrude(sketch001, length = 30)
       })
 
       await test.step('Edit shell via feature tree selection works', async () => {
-        await toolbar.closePane('code')
         await toolbar.openPane('feature-tree')
         const operationButton = await toolbar.getFeatureTreeOperation(
           'Shell',
@@ -3044,7 +3037,6 @@ extrude001 = extrude(sketch001, length = 30)
         await cmdBar.progressCmdBar()
         await toolbar.closePane('feature-tree')
         await scene.expectPixelColor([150, 150, 150], testPoint, 15)
-        await toolbar.openPane('code')
         await editor.expectEditor.toContain(editedShellDeclaration)
         await editor.expectState({
           diagnostics: [],
@@ -3079,7 +3071,7 @@ extrude001 = extrude(sketch001, length = 40)
     }, initialCode)
     await page.setBodyDimensions({ width: 1000, height: 500 })
     await homePage.goToModelingScene()
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // One dumb hardcoded screen pixel value
     const testPoint = { x: 580, y: 180 }
@@ -3097,6 +3089,9 @@ extrude001 = extrude(sketch001, length = 40)
 
     await test.step(`Go through the command bar flow, selecting a wall and keeping default thickness`, async () => {
       await toolbar.shellButton.click()
+      await expect
+        .poll(() => page.getByText('Please select one').count())
+        .toBe(1)
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'selection',
@@ -3108,6 +3103,9 @@ extrude001 = extrude(sketch001, length = 40)
         highlightedHeaderArg: 'selection',
         commandName: 'Shell',
       })
+      await expect
+        .poll(() => page.getByText('Please select one').count())
+        .toBe(1)
       await clickOnCap()
       await page.keyboard.down('Shift')
       await clickOnWall()
@@ -3116,6 +3114,7 @@ extrude001 = extrude(sketch001, length = 40)
       await cmdBar.progressCmdBar()
       await page.waitForTimeout(500)
       await cmdBar.progressCmdBar()
+      await page.waitForTimeout(500)
       await cmdBar.expectState({
         stage: 'review',
         headerArguments: {
@@ -3124,7 +3123,9 @@ extrude001 = extrude(sketch001, length = 40)
         },
         commandName: 'Shell',
       })
+      await page.waitForTimeout(500)
       await cmdBar.progressCmdBar()
+      await page.waitForTimeout(500)
     })
 
     await test.step(`Confirm code is added to the editor, scene has changed`, async () => {
@@ -3139,7 +3140,6 @@ extrude001 = extrude(sketch001, length = 40)
     })
 
     await test.step('Edit shell via feature tree selection works', async () => {
-      await editor.closePane()
       const operationButton = await toolbar.getFeatureTreeOperation('Shell', 0)
       await operationButton.dblclick({ button: 'left' })
       await cmdBar.expectState({
@@ -3154,6 +3154,7 @@ extrude001 = extrude(sketch001, length = 40)
       })
       await page.keyboard.insertText('1')
       await cmdBar.progressCmdBar()
+      await page.waitForTimeout(500)
       await cmdBar.expectState({
         stage: 'review',
         headerArguments: {
@@ -3164,7 +3165,6 @@ extrude001 = extrude(sketch001, length = 40)
       await cmdBar.progressCmdBar()
       await toolbar.closePane('feature-tree')
       await scene.expectPixelColor([150, 150, 150], testPoint, 15)
-      await toolbar.openPane('code')
       await editor.expectEditor.toContain(editedShellDeclaration)
       await editor.expectState({
         diagnostics: [],
@@ -3218,7 +3218,7 @@ extrude002 = extrude(sketch002, length = 50)
       }, initialCode)
       await page.setBodyDimensions({ width: 1200, height: 500 })
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
 
       // One dumb hardcoded screen pixel value
       const testPoint = { x: 580, y: 320 }
@@ -3243,12 +3243,13 @@ extrude002 = extrude(sketch002, length = 50)
           highlightedHeaderArg: 'selection',
           commandName: 'Shell',
         })
+        await expect
+          .poll(() => page.getByText('Please select one').count())
+          .toBe(1)
         await clickOnCap()
-        await page.waitForTimeout(500)
+        await page.waitForTimeout(1000)
         await cmdBar.progressCmdBar()
-        await page.waitForTimeout(500)
         await cmdBar.progressCmdBar()
-        await page.waitForTimeout(500)
         await cmdBar.expectState({
           stage: 'review',
           headerArguments: {
@@ -3306,7 +3307,7 @@ profile001 = startProfileAt([-20, 20], sketch001)
       }, initialCode)
       await page.setBodyDimensions({ width: 1000, height: 500 })
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
       await toolbar.openPane('feature-tree')
 
       // One dumb hardcoded screen pixel value
@@ -3386,7 +3387,7 @@ sweep001 = sweep(sketch001, path = sketch002)
     }, initialCode)
     await page.setBodyDimensions({ width: 1000, height: 500 })
     await homePage.goToModelingScene()
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // One dumb hardcoded screen pixel value
     const testPoint = { x: 500, y: 250 }
@@ -3399,6 +3400,9 @@ sweep001 = sweep(sketch001, path = sketch002)
 
     await test.step(`Go through the Shell flow and fail validation with a toast`, async () => {
       await toolbar.shellButton.click()
+      await expect
+        .poll(() => page.getByText('Please select one').count())
+        .toBe(1)
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'selection',
@@ -3433,26 +3437,29 @@ sweep001 = sweep(sketch001, path = sketch002)
       const initialCode = `
 sketch001 = startSketchOn(XZ)
 |> startProfileAt([-100.0, 100.0], %)
-|> angledLine([0, 200.0], %, $rectangleSegmentA001)
-|> angledLine([segAng(rectangleSegmentA001) - 90, 200], %, $rectangleSegmentB001)
-|> angledLine([
-segAng(rectangleSegmentA001),
--segLen(rectangleSegmentA001)
-], %, $rectangleSegmentC001)
+|> angledLine(angle = 0, length = 200.0, tag = $rectangleSegmentA001)
+|> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 200, tag = $rectangleSegmentB001)
+|> angledLine(
+angle=segAng(rectangleSegmentA001),
+length=-segLen(rectangleSegmentA001),
+tag=$rectangleSegmentC001,
+)
 |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
 |> close()
 extrude001 = extrude(sketch001, length = 200)
 sketch002 = startSketchOn(extrude001, rectangleSegmentA001)
 |> startProfileAt([-66.77, 84.81], %)
-|> angledLine([180, 27.08], %, $rectangleSegmentA002)
-|> angledLine([
-segAng(rectangleSegmentA002) - 90,
-27.8
-], %, $rectangleSegmentB002)
-|> angledLine([
-segAng(rectangleSegmentA002),
--segLen(rectangleSegmentA002)
-], %, $rectangleSegmentC002)
+|> angledLine(angle = 180, length = 27.08, tag = $rectangleSegmentA002)
+|> angledLine(
+angle=segAng(rectangleSegmentA002) - 90,
+length=27.8,
+tag=$rectangleSegmentB002,
+)
+|> angledLine(
+angle=segAng(rectangleSegmentA002),
+length=-segLen(rectangleSegmentA002),
+tag=$rectangleSegmentC002,
+)
 |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
 |> close()
 `
@@ -3462,12 +3469,13 @@ segAng(rectangleSegmentA002),
       }, initialCode)
       await page.setBodyDimensions({ width: 1000, height: 500 })
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
 
       // select line of code
-      const codeToSelecton = `segAng(rectangleSegmentA002) - 90,`
+      const codeToSelection = `segAng(rectangleSegmentA002) - 90,`
       // revolve
-      await page.getByText(codeToSelecton).click()
+      await editor.scrollToText(codeToSelection)
+      await page.getByText(codeToSelection).click()
       await toolbar.revolveButton.click()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
@@ -3521,35 +3529,32 @@ segAng(rectangleSegmentA002),
     }) => {
       const initialCode = `sketch001 = startSketchOn(XZ)
   |> startProfileAt([-102.57, 101.72], %)
-  |> angledLine([0, 202.6], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       202.6
-     ], %, $rectangleSegmentB001)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %, $rectangleSegmentC001)
+  |> angledLine(angle = 0, length = 202.6, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 202.6, tag = $rectangleSegmentB001)
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 extrude001 = extrude(sketch001, length = 50)
 sketch002 = startSketchOn(extrude001, rectangleSegmentA001)
   |> circle(center = [-11.34, 10.0], radius = 8.69)
+
 `
       await context.addInitScript((initialCode) => {
         localStorage.setItem('persistCode', initialCode)
       }, initialCode)
       await page.setBodyDimensions({ width: 1000, height: 500 })
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
+      await scene.connectionEstablished()
+      await scene.settled(cmdBar)
 
       // select line of code
-      const codeToSelecton = `center = [-11.34, 10.0]`
+      const codeToSelection = `center = [-11.34, 10.0]`
       // revolve
-      await page.getByText(codeToSelecton).click()
+      await editor.scrollToText(codeToSelection)
+      await page.getByText(codeToSelection).click()
       await toolbar.revolveButton.click()
       await page.getByText('Edge', { exact: true }).click()
-      const lineCodeToSelection = `|> angledLine([0, 202.6], %, $rectangleSegmentA001)`
+      const lineCodeToSelection = `angledLine(angle = 0, length = 202.6, tag = $rectangleSegmentA001)`
       await page.getByText(lineCodeToSelection).click()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
@@ -3595,6 +3600,7 @@ sketch002 = startSketchOn(extrude001, rectangleSegmentA001)
       await editor.expectEditor.toContain(
         newCodeToFind.replace('angle = 360', 'angle = angle001')
       )
+      expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
     })
     test('revolve sketch circle around line segment from startProfileAt sketch', async ({
       context,
@@ -3605,22 +3611,23 @@ sketch002 = startSketchOn(extrude001, rectangleSegmentA001)
       toolbar,
       cmdBar,
     }) => {
-      const initialCode = `sketch002 = startSketchOn(XY)
-  |> startProfileAt([-2.02, 1.79], %)
-  |> xLine(length = 2.6)
-sketch001 = startSketchOn(-XY)
-  |> startProfileAt([-0.48, 1.25], %)
-  |> angledLine([0, 2.38], %, $rectangleSegmentA001)
-  |> angledLine([segAng(rectangleSegmentA001) - 90, 2.4], %, $rectangleSegmentB001)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %, $rectangleSegmentC001)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-extrude001 = extrude(sketch001, length = 5)
-sketch003 = startSketchOn(extrude001, 'START')
-  |> circle(center = [-0.69, 0.56], radius = 0.28)
+      const initialCode = `
+    sketch002 = startSketchOn(XY)
+      |> startProfileAt([-2.02, 1.79], %)
+      |> xLine(length = 2.6)
+    sketch001 = startSketchOn('-XY')
+      |> startProfileAt([-0.48, 1.25], %)
+      |> angledLine(angle = 0, length = 2.38, tag = $rectangleSegmentA001)
+      |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2.4, tag = $rectangleSegmentB001)
+      |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
+      |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+      |> close()
+    extrude001 = extrude(sketch001, length = 5)
+    sketch003 = startSketchOn(extrude001, 'START')
+      |> circle(
+        center = [-0.69, 0.56],
+        radius = 0.28
+      )
 `
 
       await context.addInitScript((initialCode) => {
@@ -3628,15 +3635,20 @@ sketch003 = startSketchOn(extrude001, 'START')
       }, initialCode)
       await page.setBodyDimensions({ width: 1000, height: 500 })
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
+      await scene.connectionEstablished()
+      await scene.settled(cmdBar)
 
       // select line of code
-      const codeToSelecton = `center = [-0.69, 0.56]`
+      const codeToSelection = `center = [-0.69, 0.56]`
       // revolve
-      await page.getByText(codeToSelecton).click()
       await toolbar.revolveButton.click()
+      await page.waitForTimeout(1000)
+      await editor.scrollToText(codeToSelection)
+      await page.getByText(codeToSelection).click()
+      await expect.poll(() => page.getByText('AxisOrEdge').count()).toBe(2)
       await page.getByText('Edge', { exact: true }).click()
-      const lineCodeToSelection = `|> xLine(length = 2.6)`
+      const lineCodeToSelection = `length = 2.6`
+      await editor.scrollToText(lineCodeToSelection)
       await page.getByText(lineCodeToSelection).click()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
@@ -3703,21 +3715,22 @@ extrude001 = extrude(profile001, length = 100)
     }, initialCode)
     await page.setBodyDimensions({ width: 1000, height: 500 })
     await homePage.goToModelingScene()
-    await scene.waitForExecutionDone()
+    await scene.settled(cmdBar)
 
     // One dumb hardcoded screen pixel value
     const testPoint = { x: 500, y: 250 }
     const initialColor: [number, number, number] = [123, 123, 123]
+    const tolerance = 50
 
     await test.step(`Confirm extrude exists with default appearance`, async () => {
       await toolbar.closePane('code')
-      await scene.expectPixelColor(initialColor, testPoint, 15)
+      await scene.expectPixelColor(initialColor, testPoint, tolerance)
     })
 
     async function setApperanceAndCheck(
       option: string,
       hex: string,
-      shapeColor: [number, number, number]
+      shapeColor?: [number, number, number]
     ) {
       await toolbar.openPane('feature-tree')
       const enterAppearanceFlow = async (stepName: string) =>
@@ -3766,7 +3779,9 @@ extrude001 = extrude(profile001, length = 100)
       })
       await cmdBar.progressCmdBar()
       await toolbar.closePane('feature-tree')
-      await scene.expectPixelColor(shapeColor, testPoint, 10)
+      if (shapeColor) {
+        await scene.expectPixelColor(shapeColor, testPoint, tolerance)
+      }
       await toolbar.openPane('code')
       if (hex === 'default') {
         const anyAppearanceDeclaration = `|> appearance(`
@@ -3785,16 +3800,17 @@ extrude001 = extrude(profile001, length = 100)
     }
 
     await test.step(`Go through the Set Appearance flow for all options`, async () => {
-      await setApperanceAndCheck('Red', '#FF0000', [180, 0, 0])
-      await setApperanceAndCheck('Green', '#00FF00', [0, 180, 0])
-      await setApperanceAndCheck('Blue', '#0000FF', [0, 0, 180])
-      await setApperanceAndCheck('Turquoise', '#00FFFF', [0, 180, 180])
-      await setApperanceAndCheck('Purple', '#FF00FF', [180, 0, 180])
-      await setApperanceAndCheck('Yellow', '#FFFF00', [180, 180, 0])
-      await setApperanceAndCheck('Black', '#000000', [0, 0, 0])
-      await setApperanceAndCheck('Dark Grey', '#080808', [0x33, 0x33, 0x33])
-      await setApperanceAndCheck('Light Grey', '#D3D3D3', [176, 176, 176])
-      await setApperanceAndCheck('White', '#FFFFFF', [184, 184, 184])
+      await setApperanceAndCheck('Red', '#FF0000', [180, 30, 30])
+      // Not checking the scene color every time cause that's not really deterministic. Red seems reliable though
+      await setApperanceAndCheck('Green', '#00FF00')
+      await setApperanceAndCheck('Blue', '#0000FF')
+      await setApperanceAndCheck('Turquoise', '#00FFFF')
+      await setApperanceAndCheck('Purple', '#FF00FF')
+      await setApperanceAndCheck('Yellow', '#FFFF00')
+      await setApperanceAndCheck('Black', '#000000')
+      await setApperanceAndCheck('Dark Grey', '#080808')
+      await setApperanceAndCheck('Light Grey', '#D3D3D3')
+      await setApperanceAndCheck('White', '#FFFFFF')
       await setApperanceAndCheck(
         'Default (clear appearance)',
         'default',

e2e/playwright/projects.spec.ts

@@ -83,7 +83,7 @@ test(
 test(
   'click help/keybindings from project page',
   { tag: '@electron' },
-  async ({ context, page }, testInfo) => {
+  async ({ scene, cmdBar, context, page }, testInfo) => {
     await context.folderSetupFn(async (dir) => {
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
@@ -95,17 +95,11 @@ test(
 
     await page.setBodyDimensions({ width: 1200, height: 500 })
 
-    page.on('console', console.log)
-
     // expect to see the text bracket
     await expect(page.getByText('bracket')).toBeVisible()
-
     await page.getByText('bracket').click()
 
-    await expect(page.getByTestId('loading')).toBeAttached()
-    await expect(page.getByTestId('loading')).not.toBeAttached({
-      timeout: 20_000,
-    })
+    await scene.settled(cmdBar)
 
     // click ? button
     await page.getByTestId('help-button').click()
@@ -120,7 +114,7 @@ test(
 test(
   'open a file in a project works and renders, open another file in different project with errors, it should clear the scene',
   { tag: '@electron' },
-  async ({ context, page, editor }, testInfo) => {
+  async ({ scene, cmdBar, context, page, editor }, testInfo) => {
     await context.folderSetupFn(async (dir) => {
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
@@ -149,24 +143,7 @@ test(
 
       await page.getByText('bracket').click()
 
-      await expect(page.getByTestId('loading')).toBeAttached()
-      await expect(page.getByTestId('loading')).not.toBeAttached({
-        timeout: 20_000,
-      })
-
-      await expect(
-        page.getByRole('button', { name: 'Start Sketch' })
-      ).toBeEnabled({
-        timeout: 20_000,
-      })
-
-      // gray at this pixel means the stream has loaded in the most
-      // user way we can verify it (pixel color)
-      await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [110, 110, 110]), {
-          timeout: 10_000,
-        })
-        .toBeLessThan(20)
+      await scene.settled(cmdBar)
     })
 
     await test.step('Clicking the logo takes us back to the projects page / home', async () => {
@@ -209,7 +186,7 @@ test(
 test(
   'open a file in a project works and renders, open another file in different project that is empty, it should clear the scene',
   { tag: '@electron' },
-  async ({ context, page }, testInfo) => {
+  async ({ scene, cmdBar, context, page }, testInfo) => {
     await context.folderSetupFn(async (dir) => {
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
@@ -235,24 +212,7 @@ test(
 
       await page.getByText('bracket').click()
 
-      await expect(page.getByTestId('loading')).toBeAttached()
-      await expect(page.getByTestId('loading')).not.toBeAttached({
-        timeout: 20_000,
-      })
-
-      await expect(
-        page.getByRole('button', { name: 'Start Sketch' })
-      ).toBeEnabled({
-        timeout: 20_000,
-      })
-
-      // gray at this pixel means the stream has loaded in the most
-      // user way we can verify it (pixel color)
-      await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [125, 125, 125]), {
-          timeout: 10_000,
-        })
-        .toBeLessThan(15)
+      await scene.settled(cmdBar)
     })
 
     await test.step('Clicking the logo takes us back to the projects page / home', async () => {
@@ -352,7 +312,7 @@ test(
 test(
   'open a file in a project works and renders, open another file in the same project with errors, it should clear the scene',
   { tag: '@electron' },
-  async ({ context, page }, testInfo) => {
+  async ({ scene, cmdBar, context, page }, testInfo) => {
     if (runningOnWindows()) {
       test.fixme(orRunWhenFullSuiteEnabled())
     }
@@ -380,10 +340,7 @@ test(
 
       await page.getByText('bracket').click()
 
-      await expect(page.getByTestId('loading')).toBeAttached()
-      await expect(page.getByTestId('loading')).not.toBeAttached({
-        timeout: 20_000,
-      })
+      await scene.settled(cmdBar)
 
       await expect(
         page.getByRole('button', { name: 'Start Sketch' })
@@ -443,10 +400,10 @@ test(
     await expect(page.getByText('broken-code')).toBeVisible()
     await page.getByText('broken-code').click()
 
-    // Gotcha: You can not use scene.waitForExecutionDone() since the KCL code is going to fail
-    await expect(page.getByTestId('loading')).not.toBeAttached({
-      timeout: 20_000,
-    })
+    // Gotcha: You can not use scene.settled() since the KCL code is going to fail
+    await expect(
+      page.getByTestId('model-state-indicator-playing')
+    ).toBeAttached()
 
     // Gotcha: Scroll to the text content in code mirror because CodeMirror lazy loads DOM content
     await editor.scrollToText(
@@ -469,7 +426,7 @@ test.describe('Can export from electron app', () => {
     test(
       `Can export using ${method}`,
       { tag: ['@electron', '@skipLocalEngine'] },
-      async ({ context, page, tronApp }, testInfo) => {
+      async ({ scene, cmdBar, context, page, tronApp }, testInfo) => {
         if (!tronApp) {
           fail()
         }
@@ -499,10 +456,7 @@ test.describe('Can export from electron app', () => {
 
           await page.getByText('bracket').click()
 
-          await expect(page.getByTestId('loading')).toBeAttached()
-          await expect(page.getByTestId('loading')).not.toBeAttached({
-            timeout: 20_000,
-          })
+          await scene.settled(cmdBar)
 
           await expect(
             page.getByRole('button', { name: 'Start Sketch' })
@@ -812,7 +766,7 @@ test.describe(`Project management commands`, () => {
   test(
     `Rename from project page`,
     { tag: '@electron' },
-    async ({ context, page }, testInfo) => {
+    async ({ context, page, scene, cmdBar }, testInfo) => {
       const projectName = `my_project_to_rename`
       await context.folderSetupFn(async (dir) => {
         await fsp.mkdir(`${dir}/${projectName}`, { recursive: true })
@@ -821,7 +775,6 @@ test.describe(`Project management commands`, () => {
           `${dir}/${projectName}/main.kcl`
         )
       })
-      const u = await getUtils(page)
 
       // Constants and locators
       const projectHomeLink = page.getByTestId('project-link')
@@ -843,7 +796,7 @@ test.describe(`Project management commands`, () => {
         page.on('console', console.log)
 
         await projectHomeLink.click()
-        await u.waitForPageLoad()
+        await scene.settled(cmdBar)
       })
 
       await test.step(`Run rename command via command palette`, async () => {
@@ -882,7 +835,6 @@ test.describe(`Project management commands`, () => {
           `${dir}/${projectName}/main.kcl`
         )
       })
-      const u = await getUtils(page)
 
       // Constants and locators
       const projectHomeLink = page.getByTestId('project-link')
@@ -900,9 +852,9 @@ test.describe(`Project management commands`, () => {
         await page.setBodyDimensions({ width: 1200, height: 500 })
         page.on('console', console.log)
 
+        await page.waitForTimeout(3000)
+
         await projectHomeLink.click()
-        await u.waitForPageLoad()
-        await scene.connectionEstablished()
         await scene.settled(cmdBar)
       })
 
@@ -926,7 +878,7 @@ test.describe(`Project management commands`, () => {
   test(
     `Rename from home page`,
     { tag: '@electron' },
-    async ({ context, page, homePage }, testInfo) => {
+    async ({ context, page, homePage, scene, cmdBar }, testInfo) => {
       const projectName = `my_project_to_rename`
       await context.folderSetupFn(async (dir) => {
         await fsp.mkdir(`${dir}/${projectName}`, { recursive: true })
@@ -982,7 +934,7 @@ test.describe(`Project management commands`, () => {
   test(
     `Delete from home page`,
     { tag: '@electron' },
-    async ({ context, page }, testInfo) => {
+    async ({ context, page, scene, cmdBar }, testInfo) => {
       const projectName = `my_project_to_delete`
       await context.folderSetupFn(async (dir) => {
         await fsp.mkdir(`${dir}/${projectName}`, { recursive: true })
@@ -1033,6 +985,7 @@ test.describe(`Project management commands`, () => {
     homePage,
     toolbar,
     cmdBar,
+    scene,
   }) => {
     const projectName = 'test-project'
     await test.step(`Setup`, async () => {
@@ -1072,10 +1025,11 @@ test.describe(`Project management commands`, () => {
       })
       await cmdBar.argumentInput.fill(projectName)
       await cmdBar.progressCmdBar()
+      await scene.settled(cmdBar)
+      await toolbar.logoLink.click()
     })
 
     await test.step(`Check the project was created with a non-colliding name`, async () => {
-      await toolbar.logoLink.click()
       await homePage.expectState({
         projectCards: [
           {
@@ -1106,10 +1060,11 @@ test.describe(`Project management commands`, () => {
       })
       await cmdBar.argumentInput.fill(projectName)
       await cmdBar.progressCmdBar()
+      await scene.settled(cmdBar)
+      await toolbar.logoLink.click()
     })
 
     await test.step(`Check the second project was created with a non-colliding name`, async () => {
-      await toolbar.logoLink.click()
       await homePage.expectState({
         projectCards: [
           {
@@ -1195,7 +1150,7 @@ test(
 test(
   'Nested directories in project without main.kcl do not create main.kcl',
   { tag: '@electron' },
-  async ({ context, page }, testInfo) => {
+  async ({ scene, cmdBar, context, page }, testInfo) => {
     let testDir: string | undefined
     await context.folderSetupFn(async (dir) => {
       await fsp.mkdir(path.join(dir, 'router-template-slate', 'nested'), {
@@ -1218,10 +1173,7 @@ test(
 
     await test.step('Open the project', async () => {
       await page.getByText('router-template-slate').click()
-      await expect(page.getByTestId('loading')).toBeAttached()
-      await expect(page.getByTestId('loading')).not.toBeAttached({
-        timeout: 20_000,
-      })
+      await scene.settled(cmdBar)
 
       // It actually loads.
       await expect(u.codeLocator).toContainText('mounting bracket')
@@ -1334,7 +1286,7 @@ test(
 test(
   'Can load a file with CRLF line endings',
   { tag: '@electron' },
-  async ({ context, page }, testInfo) => {
+  async ({ context, page, scene, cmdBar }, testInfo) => {
     if (runningOnWindows()) {
       test.fixme(orRunWhenFullSuiteEnabled())
     }
@@ -1357,13 +1309,8 @@ test(
     const u = await getUtils(page)
     await page.setBodyDimensions({ width: 1200, height: 500 })
 
-    page.on('console', console.log)
-
     await page.getByText('router-template-slate').click()
-    await expect(page.getByTestId('loading')).toBeAttached()
-    await expect(page.getByTestId('loading')).not.toBeAttached({
-      timeout: 20_000,
-    })
+    await scene.settled(cmdBar)
 
     await expect(u.codeLocator).toContainText('routerDiameter')
     await expect(u.codeLocator).toContainText('templateGap')
@@ -1578,7 +1525,7 @@ extrude001 = extrude(sketch001, length = 200)`)
 test(
   'Opening a project should successfully load the stream, (regression test that this also works when switching between projects)',
   { tag: '@electron' },
-  async ({ context, page, cmdBar, homePage }, testInfo) => {
+  async ({ context, page, cmdBar, homePage, scene }, testInfo) => {
     await context.folderSetupFn(async (dir) => {
       await fsp.mkdir(path.join(dir, 'router-template-slate'), {
         recursive: true,
@@ -1607,13 +1554,10 @@ test(
         path.join(dir, 'bracket', 'main.kcl')
       )
     })
-    const u = await getUtils(page)
+
     await page.setBodyDimensions({ width: 1200, height: 500 })
-
     page.on('console', console.log)
 
-    const pointOnModel = { x: 630, y: 280 }
-
     await test.step('Opening the bracket project via command palette should load the stream', async () => {
       await homePage.expectState({
         projectCards: [
@@ -1647,15 +1591,7 @@ test(
         stage: 'commandBarClosed',
       })
 
-      await u.waitForPageLoad()
-
-      // gray at this pixel means the stream has loaded in the most
-      // user way we can verify it (pixel color)
-      await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
-          timeout: 10_000,
-        })
-        .toBeLessThan(15)
+      await scene.settled(cmdBar)
     })
 
     await test.step('Clicking the logo takes us back to the projects page / home', async () => {
@@ -1672,15 +1608,7 @@ test(
 
       await page.getByText('router-template-slate').click()
 
-      await u.waitForPageLoad()
-
-      // gray at this pixel means the stream has loaded in the most
-      // user way we can verify it (pixel color)
-      await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [143, 143, 143]), {
-          timeout: 10_000,
-        })
-        .toBeLessThan(15)
+      await scene.settled(cmdBar)
     })
 
     await test.step('The projects on the home page should still be normal', async () => {
@@ -1733,8 +1661,6 @@ test(
     })
     await page.setBodyDimensions({ width: 1200, height: 500 })
 
-    page.on('console', console.log)
-
     // we'll grab this from the settings on screen before we switch
     let originalProjectDirName: string
     const newProjectDirName = testInfo.outputPath(
@@ -1875,7 +1801,7 @@ test(
 test(
   'file pane is scrollable when there are many files',
   { tag: '@electron' },
-  async ({ context, page }, testInfo) => {
+  async ({ scene, cmdBar, context, page }, testInfo) => {
     await context.folderSetupFn(async (dir) => {
       const testDir = path.join(dir, 'testProject')
       await fsp.mkdir(testDir, { recursive: true })
@@ -1954,10 +1880,8 @@ test(
 
     await test.step('setup, open file pane', async () => {
       await page.getByText('testProject').click()
-      await expect(page.getByTestId('loading')).toBeAttached()
-      await expect(page.getByTestId('loading')).not.toBeAttached({
-        timeout: 20_000,
-      })
+
+      await scene.settled(cmdBar)
 
       await page.getByTestId('files-pane-button').click()
     })

e2e/playwright/prompt-to-edit-snapshot-tests.spec.ts

@@ -41,15 +41,13 @@ sketch002 = startSketchOn(XZ)
 extrude002 = extrude(sketch002, length = 50)
 sketch003 = startSketchOn(XY)
   |> startProfileAt([52.92, 157.81], %)
-  |> angledLine([0, 176.4], %, $rectangleSegmentA001)
-  |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
-       53.4
-     ], %, $rectangleSegmentB001)
-  |> angledLine([
-       segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
-     ], %, $rectangleSegmentC001)
+  |> angledLine(angle = 0, length = 176.4, tag = $rectangleSegmentA001)
+  |> angledLine(
+       angle = segAng(rectangleSegmentA001) - 90,
+       length = 53.4,
+       tag = $rectangleSegmentB001,
+     )
+  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 extrude003 = extrude(sketch003, length = 20)
@@ -63,7 +61,7 @@ test.describe('edit with AI example snapshots', () => {
         localStorage.setItem('persistCode', file)
       }, file)
       await homePage.goToModelingScene()
-      await scene.waitForExecutionDone()
+      await scene.settled(cmdBar)
 
       const body1CapCoords = { x: 571, y: 351 }
       const [clickBody1Cap] = scene.makeMouseHelpers(
@@ -74,7 +72,6 @@ test.describe('edit with AI example snapshots', () => {
       const submittingToast = page.getByText('Submitting to Text-to-CAD API...')
 
       await test.step('wait for scene to load select body and check selection came through', async () => {
-        await scene.expectPixelColor([134, 134, 134], body1CapCoords, 15)
         await clickBody1Cap()
         await scene.expectPixelColor(yellow, body1CapCoords, 20)
         await editor.expectState({