Move axes to std constants; move helix, revolve, and mirror2d to be declated in KCL

Signed-off-by: Nick Cameron <nrc@ncameron.org>

docs/kcl/appearance.md

@@ -54,7 +54,7 @@ example = extrude(exampleSketch, length = 5)
 // Add color to a revolved solid.
 sketch001 = startSketchOn(XY)
   |> circle(center = [15, 0], radius = 5)
-  |> revolve(angle = 360, axis = 'y')
+  |> revolve(angle = 360, axis = Y)
   |> appearance(color = '#ff0000', metalness = 90, roughness = 90)
 ```
 

docs/kcl/consts.md

@@ -9,13 +9,12 @@ layout: manual
 
 ### `std`
 
-- [`HALF_TURN`](/docs/kcl/consts/std-HALF_TURN)
-- [`QUARTER_TURN`](/docs/kcl/consts/std-QUARTER_TURN)
-- [`THREE_QUARTER_TURN`](/docs/kcl/consts/std-THREE_QUARTER_TURN)
+- [`X`](/docs/kcl/consts/std-X)
 - [`XY`](/docs/kcl/consts/std-XY)
 - [`XZ`](/docs/kcl/consts/std-XZ)
+- [`Y`](/docs/kcl/consts/std-Y)
 - [`YZ`](/docs/kcl/consts/std-YZ)
-- [`ZERO`](/docs/kcl/consts/std-ZERO)
+- [`Z`](/docs/kcl/consts/std-Z)
 
 ### `std::math`
 
@@ -23,3 +22,10 @@ layout: manual
 - [`PI`](/docs/kcl/consts/std-math-PI)
 - [`TAU`](/docs/kcl/consts/std-math-TAU)
 
+### `std::turns`
+
+- [`HALF_TURN`](/docs/kcl/consts/std-turns-HALF_TURN)
+- [`QUARTER_TURN`](/docs/kcl/consts/std-turns-QUARTER_TURN)
+- [`THREE_QUARTER_TURN`](/docs/kcl/consts/std-turns-THREE_QUARTER_TURN)
+- [`ZERO`](/docs/kcl/consts/std-turns-ZERO)
+

docs/kcl/consts/std-HALF_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::HALF_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::HALF_TURN: number(deg) = 180deg
-```
-
-

docs/kcl/consts/std-QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::QUARTER_TURN: number(deg) = 90deg
-```
-
-

docs/kcl/consts/std-THREE_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::THREE_QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::THREE_QUARTER_TURN: number(deg) = 270deg
-```
-
-

docs/kcl/consts/std-X.md

@@ -1,5 +1,5 @@
 ---
-title: "std::ZERO"
+title: "std::X"
 excerpt: ""
 layout: manual
 ---
@@ -9,7 +9,7 @@ layout: manual
 
 
 ```js
-std::ZERO: number = 0
+std::X
 ```
 
 

docs/kcl/consts/std-Y.md

@@ -0,0 +1,15 @@
+---
+title: "std::Y"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::Y
+```
+
+

docs/kcl/consts/std-Z.md

@@ -0,0 +1,15 @@
+---
+title: "std::Z"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::Z
+```
+
+

docs/kcl/consts/std-turns-HALF_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::HALF_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::HALF_TURN: number(deg) = 180deg
+```
+
+

docs/kcl/consts/std-turns-QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::QUARTER_TURN: number(deg) = 90deg
+```
+
+

docs/kcl/consts/std-turns-THREE_QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::THREE_QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::THREE_QUARTER_TURN: number(deg) = 270deg
+```
+
+

docs/kcl/consts/std-turns-ZERO.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::ZERO"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::ZERO: number = 0
+```
+
+

docs/kcl/index.md

@@ -22,20 +22,22 @@ layout: manual
   * [`string`](kcl/types/string)
   * [`tag`](kcl/types/tag)
 * **std**
+  * [`Axis2d`](kcl/types/Axis2d)
+  * [`Axis3d`](kcl/types/Axis3d)
+  * [`Edge`](kcl/types/Edge)
   * [`Face`](kcl/types/Face)
-  * [`HALF_TURN`](kcl/consts/std-HALF_TURN)
   * [`Helix`](kcl/types/Helix)
   * [`Plane`](kcl/types/Plane)
   * [`Point2d`](kcl/types/Point2d)
   * [`Point3d`](kcl/types/Point3d)
-  * [`QUARTER_TURN`](kcl/consts/std-QUARTER_TURN)
   * [`Sketch`](kcl/types/Sketch)
   * [`Solid`](kcl/types/Solid)
-  * [`THREE_QUARTER_TURN`](kcl/consts/std-THREE_QUARTER_TURN)
+  * [`X`](kcl/consts/std-X)
   * [`XY`](kcl/consts/std-XY)
   * [`XZ`](kcl/consts/std-XZ)
+  * [`Y`](kcl/consts/std-Y)
   * [`YZ`](kcl/consts/std-YZ)
-  * [`ZERO`](kcl/consts/std-ZERO)
+  * [`Z`](kcl/consts/std-Z)
   * [`abs`](kcl/abs)
   * [`acos`](kcl/acos)
   * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
@@ -72,7 +74,7 @@ layout: manual
   * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
   * [`getOppositeEdge`](kcl/getOppositeEdge)
   * [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
-  * [`helix`](kcl/helix)
+  * [`helix`](kcl/std-helix)
   * [`hole`](kcl/hole)
   * [`hollow`](kcl/hollow)
   * [`inch`](kcl/inch)
@@ -91,7 +93,6 @@ layout: manual
   * [`map`](kcl/map)
   * [`max`](kcl/max)
   * [`min`](kcl/min)
-  * [`mirror2d`](kcl/mirror2d)
   * [`mm`](kcl/mm)
   * [`offsetPlane`](kcl/offsetPlane)
   * [`patternCircular2d`](kcl/patternCircular2d)
@@ -110,7 +111,7 @@ layout: manual
   * [`push`](kcl/push)
   * [`reduce`](kcl/reduce)
   * [`rem`](kcl/rem)
-  * [`revolve`](kcl/revolve)
+  * [`revolve`](kcl/std-revolve)
   * [`rotate`](kcl/rotate)
   * [`round`](kcl/round)
   * [`scale`](kcl/scale)
@@ -146,3 +147,9 @@ layout: manual
   * [`tan`](kcl/std-math-tan)
 * **std::sketch**
   * [`circle`](kcl/std-sketch-circle)
+  * [`mirror2d`](kcl/std-sketch-mirror2d)
+* **std::turns**
+  * [`turns::HALF_TURN`](kcl/consts/std-turns-HALF_TURN)
+  * [`turns::QUARTER_TURN`](kcl/consts/std-turns-QUARTER_TURN)
+  * [`turns::THREE_QUARTER_TURN`](kcl/consts/std-turns-THREE_QUARTER_TURN)
+  * [`turns::ZERO`](kcl/consts/std-turns-ZERO)

docs/kcl/startSketchOn.md

@@ -146,7 +146,7 @@ exampleSketch = startSketchOn(XY)
   |> line(end = [-2, 0])
   |> close()
 
-example = revolve(exampleSketch, axis = 'y', angle = 180)
+example = revolve(exampleSketch, axis = Y, angle = 180)
 
 exampleSketch002 = startSketchOn(example, 'end')
   |> startProfileAt([4.5, -5], %)
@@ -177,7 +177,7 @@ exampleSketch = startSketchOn(XY)
 
 example = revolve(
   exampleSketch,
-  axis = 'y',
+  axis = Y,
   angle = 180,
   tagEnd = $end01,
 )

docs/kcl/sweep.md

@@ -74,7 +74,7 @@ helixPath = helix(
   revolutions = 4,
   length = 10,
   radius = 5,
-  axis = 'Z',
+  axis = Z,
 )
 
 // Create a spring by sweeping around the helix path.

docs/kcl/types/Axis2d.md

@@ -0,0 +1,12 @@
+---
+title: "std::Axis2d"
+excerpt: "An infinte line in 2d space."
+layout: manual
+---
+
+An infinte line in 2d space.
+
+
+
+
+

docs/kcl/types/Axis3d.md

@@ -0,0 +1,12 @@
+---
+title: "std::Axis3d"
+excerpt: "An infinte line in 3d space."
+layout: manual
+---
+
+An infinte line in 3d space.
+
+
+
+
+

docs/kcl/types/Edge.md

@@ -0,0 +1,12 @@
+---
+title: "std::Edge"
+excerpt: "The edge of a solid."
+layout: manual
+---
+
+The edge of a solid.
+
+
+
+
+

e2e/playwright/feature-tree-pane.spec.ts

@@ -21,7 +21,7 @@ sketch001 = startSketchOn(XZ)
   |> angledLine([-45, length001], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-revolve001 = revolve(sketch001, axis = "X")
+revolve001 = revolve(sketch001, axis = X)
 triangle()
   |> extrude(length = 30)
 plane001 = offsetPlane(XY, offset = 10)
@@ -126,7 +126,7 @@ test.describe('Feature Tree pane', () => {
       await testViewSource({
         operationName: 'Revolve',
         operationIndex: 0,
-        expectedActiveLine: 'revolve001 = revolve(sketch001, axis = "X")',
+        expectedActiveLine: 'revolve001 = revolve(sketch001, axis = X)',
       })
       await testViewSource({
         operationName: 'Triangle',

e2e/playwright/point-click.spec.ts

@@ -3469,7 +3469,7 @@ segAng(rectangleSegmentA002),
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
 
-      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = 'X')`
+      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = X)`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
     })
     test('revolve surface around edge from an extruded solid2d', async ({

e2e/playwright/sketch-tests.spec.ts

@@ -674,7 +674,7 @@ sketch001 = startProfileAt([12.34, -12.34], sketch002)
   |> line(end = [12.73, -0.09])
   |> tangentialArcTo([24.95, -5.38], %)
   |> close()
-  |> revolve(axis = "X")`
+  |> revolve(axis = X)`
       )
     })
 
@@ -761,7 +761,7 @@ sketch001 = startProfileAt([12.34, -12.34], sketch002)
   |> tangentialArcTo([24.95, -5.38], %)
   |> line(end = [1.97, 2.06])
   |> close()
-  |> revolve(axis = "X")`)
+  |> revolve(axis = X)`)
   })
   test('Can add multiple sketches', async ({ page, homePage }) => {
     const u = await getUtils(page)
@@ -1209,7 +1209,7 @@ profile001 = startProfileAt([${roundOff(scale * 69.6)}, ${roundOff(
           |> xLine(endAbsolute = 0 + .001)
           |> yLine(endAbsolute = 0)
           |> close()
-          |> revolve(axis = "Y")
+          |> revolve(axis = Y)
 
         return lugSketch
       }

e2e/playwright/snapshot-tests.spec.ts

@@ -76,11 +76,11 @@ part001 = startSketchOn(-XZ)
   |> xLine(endAbsolute = totalLen, tag = $seg03)
   |> yLine(length = -armThick, tag = $seg01)
   |> angledLineThatIntersects({
-        angle = HALF_TURN,
+        angle = turns::HALF_TURN,
         offset = -armThick,
         intersectTag = seg04
       }, %)
-  |> angledLineToY([segAng(seg04, %) + 180, ZERO], %)
+  |> angledLineToY([segAng(seg04, %) + 180, turns::ZERO], %)
   |> angledLineToY({
         angle = -bottomAng,
         to = -totalHeightHalf - armThick,
@@ -88,12 +88,12 @@ part001 = startSketchOn(-XZ)
   |> xLine(length = endAbsolute = segEndX(seg03) + 0)
   |> yLine(length = -segLen(seg01, %))
   |> angledLineThatIntersects({
-        angle = HALF_TURN,
+        angle = turns::HALF_TURN,
         offset = -armThick,
         intersectTag = seg02
       }, %)
   |> angledLineToY([segAng(seg02, %) + 180, -baseHeight], %)
-  |> xLine(endAbsolute = ZERO)
+  |> xLine(endAbsolute = turns::ZERO)
   |> close()
   |> extrude(length = 4)`
       )

e2e/playwright/testing-constraints.spec.ts

@@ -486,13 +486,13 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         testName: 'Add variable, selecting axis',
         addVariable: true,
         axisSelect: true,
-        value: 'QUARTER_TURN - angle001',
+        value: 'turns::QUARTER_TURN - angle001',
       },
       {
         testName: 'No variable, selecting axis',
         addVariable: false,
         axisSelect: true,
-        value: 'QUARTER_TURN - 7',
+        value: 'turns::QUARTER_TURN - 7',
       },
     ] as const
     for (const { testName, addVariable, value, axisSelect } of cases) {
@@ -935,12 +935,12 @@ part002 = startSketchOn(XZ)
   test.describe('Axis & segment - no modal constraints', () => {
     const cases = [
       {
-        codeAfter: `|> line(endAbsolute = [154.9, ZERO])`,
+        codeAfter: `|> line(endAbsolute = [154.9, turns::ZERO])`,
         axisClick: { x: 950, y: 250 },
         constraintName: 'Snap To X',
       },
       {
-        codeAfter: `|> line(endAbsolute = [ZERO, 61.34])`,
+        codeAfter: `|> line(endAbsolute = [turns::ZERO, 61.34])`,
         axisClick: { x: 600, y: 150 },
         constraintName: 'Snap To Y',
       },

e2e/playwright/testing-selections.spec.ts

@@ -319,7 +319,7 @@ part009 = startSketchOn(XY)
   |> line(end = [0, pipeLength])
   |> angledLineToX({ angle = 60, to = pipeLargeDia }, %)
   |> close()
-rev = revolve(part009, axis = 'y')
+rev = revolve(part009, axis = Y)
 sketch006 = startSketchOn(XY)
 profile001 = circle(
   sketch006,
@@ -376,7 +376,7 @@ profile003 = startProfileAt([40.16, -120.48], sketch006)
     await page.waitForTimeout(200)
 
     await expect(u.codeLocator).not.toContainText(
-      `rev = revolve(part009, axis: 'y')`
+      `rev = revolve(part009, axis: Y)`
     )
 
     // FIXME (commented section below), this test would select a wall that had a sketch on it, and delete the underlying extrude

e2e/playwright/various.spec.ts

@@ -67,11 +67,11 @@ part001 = startSketchOn(-XZ)
 |> xLine(endAbsolute = totalLen, tag = $seg03)
 |> yLine(length = -armThick, tag = $seg01)
 |> angledLineThatIntersects({
-      angle = HALF_TURN,
+      angle = turns::HALF_TURN,
       offset = -armThick,
       intersectTag = seg04
     }, %)
-|> angledLineToY([segAng(seg04) + 180, ZERO], %)
+|> angledLineToY([segAng(seg04) + 180, turns::ZERO], %)
 |> angledLineToY({
       angle = -bottomAng,
       to = -totalHeightHalf - armThick,
@@ -79,12 +79,12 @@ part001 = startSketchOn(-XZ)
 |> xLine(endAbsolute = segEndX(seg03) + 0)
 |> yLine(length = -segLen(seg01))
 |> angledLineThatIntersects({
-      angle = HALF_TURN,
+      angle = turns::HALF_TURN,
       offset = -armThick,
       intersectTag = seg02
     }, %)
 |> angledLineToY([segAng(seg02) + 180, -baseHeight], %)
-|> xLine(endAbsolute = ZERO)
+|> xLine(endAbsolute = turns::ZERO)
 |> close()
 |> extrude(length = 4)`
       )

public/kcl-samples/ball-bearing/main.kcl

@@ -35,7 +35,7 @@ ballsSketch = startSketchOn(XY)
   |> close()
 
 // Revolve the ball to make a sphere and pattern around the inside wall
-balls = revolve(ballsSketch, axis = "X")
+balls = revolve(ballsSketch, axis = X)
   |> patternCircular3d(
        arcDegrees = 360,
        axis = [0, 0, 1],
@@ -60,7 +60,7 @@ chainSketch = startSketchOn(XY)
   |> close()
 
 // Revolve the chain sketch
-chainHead = revolve(chainSketch, axis = "X")
+chainHead = revolve(chainSketch, axis = X)
   |> patternCircular3d(
        arcDegrees = 360,
        axis = [0, 0, 1],
@@ -80,7 +80,7 @@ linkSketch = startSketchOn(XZ)
      )
 
 // Revolve the link sketch
-linkRevolve = revolve(linkSketch, axis = 'Y', angle = 360 / nBalls)
+linkRevolve = revolve(linkSketch, axis = Y, angle = 360 / nBalls)
   |> patternCircular3d(
        arcDegrees = 360,
        axis = [0, 0, 1],

public/kcl-samples/car-wheel-assembly/brake-caliper.kcl

@@ -80,5 +80,5 @@ brakeCaliperSketch = startSketchOn(XY)
   |> close()
 
 // Revolve the brake caliper sketch
-revolve(brakeCaliperSketch, axis = "Y", angle = -70)
+revolve(brakeCaliperSketch, axis = Y, angle = -70)
   |> appearance(color = "#c82d2d", metalness = 90, roughness = 90)

public/kcl-samples/car-wheel-assembly/car-tire.kcl

@@ -41,5 +41,5 @@ tireSketch = startSketchOn(XY)
   |> close()
 
 // Revolve the sketch to create the tire
-revolve(tireSketch, axis = "Y")
+revolve(tireSketch, axis = Y)
   |> appearance(color = "#0f0f0f", roughness = 80)

public/kcl-samples/car-wheel-assembly/car-wheel.kcl

@@ -54,7 +54,7 @@ wheelCenterInner = startSketchOn(XY)
   |> yLine(endAbsolute = 0)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> revolve(axis = 'y')
+  |> revolve(axis = Y)
   |> appearance(color = "#ffffff", metalness = 0, roughness = 0)
 
 wheelCenterOuter = startSketchOn(XY)
@@ -68,7 +68,7 @@ wheelCenterOuter = startSketchOn(XY)
   |> yLine(endAbsolute = -wheelWidth / 20)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> revolve(axis = 'y')
+  |> revolve(axis = Y)
   |> appearance(color = "#ffffff", metalness = 0, roughness = 0)
 
 // Write a function that defines the spoke geometry, patterns and extrudes it
@@ -173,5 +173,5 @@ startSketchOn(XY)
   |> xLine(length = wheelWidth * 0.03)
   |> yLine(length = wheelWidth * 0.05)
   |> close()
-  |> revolve(axis = 'y')
+  |> revolve(axis = Y)
   |> appearance(color = "#ffffff", metalness = 0, roughness = 0)

public/kcl-samples/car-wheel-assembly/lug-nut.kcl

@@ -32,7 +32,7 @@ fn lug(plane, length, diameter) {
     |> xLine(endAbsolute = lugThreadDiameter)
     |> yLine(endAbsolute = 0)
     |> close()
-    |> revolve(axis = "Y")
+    |> revolve(axis = Y)
     |> appearance(color = "#dbcd70", roughness = 90, metalness = 90)
   return lugSketch
 }

public/kcl-samples/french-press/main.kcl

@@ -23,7 +23,7 @@ sketch001 = startSketchOn(XZ)
      ], %, $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> revolve(angle = 360, axis = 'Y')
+  |> revolve(angle = 360, axis = Y)
 
 // Create an angled plane to sketch the supports
 plane001 = {
@@ -132,7 +132,7 @@ sketch005 = startSketchOn(XZ)
   |> xLine(endAbsolute = 0.15)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> revolve(axis = 'y')
+  |> revolve(axis = Y)
 
 // Plunger and stem
 sketch006 = startSketchOn(XZ)
@@ -145,7 +145,7 @@ sketch006 = startSketchOn(XZ)
   |> tangentialArc({ radius = 0.6, offset = -90 }, %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> revolve(axis = 'y')
+  |> revolve(axis = Y)
 
 // Spiral plate
 sketch007 = startSketchOn(offsetPlane(XY, offset = 1.12))
@@ -201,7 +201,7 @@ sketch011 = startSketchOn(XZ)
      }, %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> revolve(axis = 'y')
+  |> revolve(axis = Y)
 
 // Draw and extrude handle
 sketch012 = startSketchOn(offsetPlane(XZ, offset = handleThickness / 2))

public/kcl-samples/gridfinity-baseplate-magnets/main.kcl

@@ -48,10 +48,8 @@ sides = patternCircular3d(
 
 // define an axis axis000
 axis000 = {
-  custom = {
-    axis = [0.0, 1.0],
-    origin = [cornerRadius, cornerRadius]
-  }
+  direction = [0.0, 1.0],
+  origin = [cornerRadius, cornerRadius]
 }
 
 // create a single corner of the bin

public/kcl-samples/gridfinity-baseplate/main.kcl

@@ -45,10 +45,8 @@ sides = patternCircular3d(
 
 // define an axis axis000
 axis000 = {
-  custom = {
-    axis = [0.0, 1.0],
-    origin = [cornerRadius, cornerRadius]
-  }
+  direction = [0.0, 1.0],
+  origin = [cornerRadius, cornerRadius]
 }
 
 // create a single corner of the bin

public/kcl-samples/gridfinity-bins-stacking-lip/main.kcl

@@ -65,13 +65,11 @@ sides = patternCircular3d(
 
 // define an axis axis000
 axis000 = {
-  custom = {
-    axis = [0.0, 1.0],
-    origin = [
-      cornerRadius + binTol,
-      cornerRadius + binTol
-    ]
-  }
+  direction = [0.0, 1.0],
+  origin = [
+    cornerRadius + binTol,
+    cornerRadius + binTol
+  ]
 }
 
 // create a single corner of the bin
@@ -272,10 +270,8 @@ lipWidths = patternCircular3d(
 
 // define an axis axis000
 axis001 = {
-  custom = {
-    axis = [0.0, 1.0],
-    origin = [cornerRadius, cornerRadius]
-  }
+  direction = [0.0, 1.0],
+  origin = [cornerRadius, cornerRadius]
 }
 
 // create a single corner of the bin

public/kcl-samples/gridfinity-bins/main.kcl

@@ -58,13 +58,11 @@ sides = patternCircular3d(
 
 // define an axis axis000
 axis000 = {
-  custom = {
-    axis = [0.0, 1.0],
-    origin = [
-      cornerRadius + binTol,
-      cornerRadius + binTol
-    ]
-  }
+  direction = [0.0, 1.0],
+  origin = [
+    cornerRadius + binTol,
+    cornerRadius + binTol
+  ]
 }
 
 // create a single corner of the bin

public/kcl-samples/i-beam/main.kcl

@@ -20,6 +20,6 @@ sketch001 = startSketchOn(-XZ)
   |> xLine(endAbsolute = webThickness / 2 + rootRadius)
   |> tangentialArc({ radius = rootRadius, offset = 90 }, %)
   |> yLine(endAbsolute = 0)
-  |> mirror2d({ axis = 'X' }, %)
-  |> mirror2d({ axis = 'Y' }, %)
+  |> mirror2d(axis = X)
+  |> mirror2d(axis = Y)
   |> extrude(length = beamLength)

public/kcl-samples/pipe-with-bend/main.kcl

@@ -24,4 +24,4 @@ pipeProfile = outerProfile
   |> hole(innerProfile, %)
 
 // revolve the pipe profile at the desired angle
-pipe = revolve(pipeProfile, axis = 'Y', angle = bendAngle)
+pipe = revolve(pipeProfile, axis = Y, angle = bendAngle)

public/kcl-samples/pipe/main.kcl

@@ -33,4 +33,4 @@ pipeSketch = startSketchOn(XY)
   |> close()
 
 // Revolve the sketch to create the pipe
-pipe = revolve(pipeSketch, axis = 'y')
+pipe = revolve(pipeSketch, axis = Y)

public/kcl-samples/poopy-shoe/main.kcl

@@ -34,10 +34,8 @@ part001 = revolve(
   sketch001,
   angle = 90,
   axis = {
-    custom = {
-      axis = [1.0, 0.0],
-      origin = [0.0, height + .0001]
-    }
+    direction = [1.0, 0.0],
+    origin = [0.0, height + .0001]
   },
 )
 

public/kcl-samples/router-template-cross-bar/main.kcl

@@ -14,7 +14,7 @@ radius = 10
 depth = 30
 distanceToInsideEdge = slateWidthHalf + templateThickness + templateGap
 sketch001 = startSketchOn(XZ)
-  |> startProfileAt([ZERO, depth + templateGap], %)
+  |> startProfileAt([turns::ZERO, depth + templateGap], %)
   |> xLine(length = slateWidthHalf - radius, tag = $seg01)
   |> arc({
        angleEnd = 0,
@@ -28,7 +28,7 @@ sketch001 = startSketchOn(XZ)
   |> yLine(length = templateThickness * 2, tag = $seg08)
   |> xLine(endAbsolute = segEndX(seg02) + 0, tag = $seg05)
   |> yLine(endAbsolute = segEndY(seg01) + templateThickness, tag = $seg10)
-  |> xLine(endAbsolute = ZERO, tag = $seg04)
+  |> xLine(endAbsolute = turns::ZERO, tag = $seg04)
   |> xLine(length = -segLen(seg04))
   |> yLine(length = -segLen(seg10))
   |> xLine(length = -segLen(seg05))

public/kcl-samples/router-template-slate/main.kcl

@@ -28,7 +28,7 @@ sketch001 = startSketchOn(XZ)
   |> yLine(endAbsolute = -templateGap * 2 - (templateDiameter / 2), tag = $seg05)
   |> xLine(endAbsolute = slateWidthHalf + templateThickness, tag = $seg04)
   |> yLine(length = -length002, tag = $seg03)
-  |> xLine(endAbsolute = ZERO, tag = $seg02)
+  |> xLine(endAbsolute = turns::ZERO, tag = $seg02)
   // |> line(end = [7.78, 11.16])
   |> xLine(length = -segLen(seg02))
   |> yLine(length = segLen(seg03))

public/kcl-samples/walkie-talkie/knob.kcl

@@ -21,7 +21,7 @@ export fn knob() {
        }, %)
     |> xLine(endAbsolute = 0.0001)
     |> close()
-    |> revolve(axis = "Y")
+    |> revolve(axis = Y)
     |> appearance(color = '#D0FF01', metalness = 90, roughness = 50)
 
   return knob

rust/kcl-lib/e2e/executor/main.rs

@@ -876,7 +876,7 @@ async fn kcl_test_simple_revolve() {
      |> line(end = [0, -5.5])
      |> line(end = [-2, 0])
      |> close()
-     |> revolve(axis = 'y')
+     |> revolve(axis = Y)
 
 "#;
 
@@ -896,7 +896,7 @@ async fn kcl_test_simple_revolve_uppercase() {
      |> line(end = [0, -5.5])
      |> line(end = [-2, 0])
      |> close()
-     |> revolve(axis = 'Y')
+     |> revolve(axis = Y)
 
 "#;
 
@@ -916,7 +916,7 @@ async fn kcl_test_simple_revolve_negative() {
      |> line(end = [0, -5.5])
      |> line(end = [-2, 0])
      |> close()
-     |> revolve(axis = '-Y', angle = 180)
+     |> revolve(axis = -Y, angle = 180)
 
 "#;
 
@@ -936,7 +936,7 @@ async fn kcl_test_revolve_bad_angle_low() {
      |> line(end = [0, -5.5])
      |> line(end = [-2, 0])
      |> close()
-     |> revolve(axis = 'y', angle = -455)
+     |> revolve(axis = Y, angle = -455)
 
 "#;
 
@@ -962,7 +962,7 @@ async fn kcl_test_revolve_bad_angle_high() {
      |> line(end = [0, -5.5])
      |> line(end = [-2, 0])
      |> close()
-     |> revolve(axis = 'y', angle = 455)
+     |> revolve(axis = Y, angle = 455)
 
 "#;
 
@@ -988,7 +988,7 @@ async fn kcl_test_simple_revolve_custom_angle() {
      |> line(end = [0, -5.5])
      |> line(end = [-2, 0])
      |> close()
-     |> revolve(axis = 'y', angle = 180)
+     |> revolve(axis = Y, angle = 180)
 
 "#;
 
@@ -1008,7 +1008,7 @@ async fn kcl_test_simple_revolve_custom_axis() {
      |> line(end = [0, -5.5])
      |> line(end = [-2, 0])
      |> close()
-     |> revolve(axis = {custom: {axis: [0, -1], origin: [0,0]}}, angle = 180)
+     |> revolve(axis = { direction = [0, -1], origin: [0,0] }, angle = 180)
 
 "#;
 
@@ -1106,7 +1106,7 @@ sketch001 = startSketchOn(box, "END")
   |> circle(center = [10,10], radius= 4 )
   |> revolve(
     angle = -90, 
-    axis = 'y' 
+    axis = Y 
     )
 "#;
 
@@ -1131,7 +1131,7 @@ sketch001 = startSketchOn(box, "end")
   |> line(end = [0, 10])
   |> close()
   |> revolve(
-      axis = 'y',
+      axis = Y,
       angle = -90,
   )
 "#;
@@ -1146,7 +1146,7 @@ async fn kcl_test_basic_revolve_circle() {
   |> circle(center = [15, 0], radius= 5)
   |> revolve(
     angle = 360, 
-    axis = 'y' 
+    axis = Y 
     )
 "#;
 
@@ -1166,7 +1166,7 @@ async fn kcl_test_simple_revolve_sketch_on_edge() {
      |> line(end = [0, -5.5])
      |> line(end = [-2, 0])
      |> close()
-     |> revolve(axis = 'y', angle = 180)
+     |> revolve(axis = Y, angle = 180)
 
 part002 = startSketchOn(part001, 'end')
     |> startProfileAt([4.5, -5], %)

rust/kcl-lib/src/docs/gen_std_tests.rs

@@ -23,8 +23,9 @@ use crate::{
 const TYPES_DIR: &str = "../../docs/kcl/types";
 const LANG_TOPICS: [&str; 5] = ["Types", "Modules", "Settings", "Known Issues", "Constants"];
 // These types are declared in std.
-const DECLARED_TYPES: [&str; 11] = [
-    "number", "string", "tag", "bool", "Sketch", "Solid", "Plane", "Helix", "Face", "Point2d", "Point3d",
+const DECLARED_TYPES: [&str; 14] = [
+    "number", "string", "tag", "bool", "Sketch", "Solid", "Plane", "Helix", "Face", "Edge", "Point2d", "Point3d",
+    "Axis2d", "Axis3d",
 ];
 
 fn init_handlebars() -> Result<handlebars::Handlebars<'static>> {
@@ -339,9 +340,9 @@ fn generate_index(combined: &IndexMap<String, Box<dyn StdLibFn>>, kcl_lib: &[Doc
         }
 
         functions.entry(d.mod_name()).or_default().push(match d {
-            DocData::Fn(f) => (f.name.clone(), d.file_name()),
-            DocData::Const(c) => (c.name.clone(), d.file_name()),
-            DocData::Ty(t) => (t.name.clone(), d.file_name()),
+            DocData::Fn(f) => (f.preferred_name.clone(), d.file_name()),
+            DocData::Const(c) => (c.preferred_name.clone(), d.file_name()),
+            DocData::Ty(t) => (t.preferred_name.clone(), d.file_name()),
         });
 
         if let DocData::Const(c) = d {

rust/kcl-lib/src/docs/kcl_doc.rs

@@ -9,7 +9,7 @@ use tower_lsp::lsp_types::{
 use crate::{
     execution::annotations,
     parsing::{
-        ast::types::{Annotation, Node, PrimitiveType, Type, VariableKind},
+        ast::types::{Annotation, ImportSelector, Node, PrimitiveType, Type, VariableKind},
         token::NumericSuffix,
     },
     ModuleId,
@@ -17,7 +17,7 @@ use crate::{
 
 pub fn walk_prelude() -> Vec<DocData> {
     let mut visitor = CollectionVisitor::default();
-    visitor.visit_module("prelude").unwrap();
+    visitor.visit_module("prelude", "").unwrap();
     visitor.result
 }
 
@@ -29,7 +29,7 @@ struct CollectionVisitor {
 }
 
 impl CollectionVisitor {
-    fn visit_module(&mut self, name: &str) -> Result<(), String> {
+    fn visit_module(&mut self, name: &str, preferred_prefix: &str) -> Result<(), String> {
         let old_name = std::mem::replace(&mut self.name, name.to_owned());
         let source = crate::modules::read_std(name).unwrap();
         let parsed = crate::parsing::parse_str(source, ModuleId::from_usize(self.id))
@@ -40,14 +40,16 @@ impl CollectionVisitor {
         for n in &parsed.body {
             match n {
                 crate::parsing::ast::types::BodyItem::ImportStatement(import) if !import.visibility.is_default() => {
-                    // Only supports glob imports for now.
-                    assert!(matches!(
-                        import.selector,
-                        crate::parsing::ast::types::ImportSelector::Glob(..)
-                    ));
                     match &import.path {
                         crate::parsing::ast::types::ImportPath::Std { path } => {
-                            self.visit_module(&path[1])?;
+                            match import.selector {
+                                ImportSelector::Glob(..) => self.visit_module(&path[1], "")?,
+                                ImportSelector::None { .. } => {
+                                    self.visit_module(&path[1], &format!("{}::", import.module_name().unwrap()))?
+                                }
+                                // Only supports glob or whole-module imports for now.
+                                _ => unimplemented!(),
+                            }
                         }
                         p => return Err(format!("Unexpected import: `{p}`")),
                     }
@@ -59,8 +61,8 @@ impl CollectionVisitor {
                         format!("std::{}::", self.name)
                     };
                     let mut dd = match var.kind {
-                        VariableKind::Fn => DocData::Fn(FnData::from_ast(var, qual_name)),
-                        VariableKind::Const => DocData::Const(ConstData::from_ast(var, qual_name)),
+                        VariableKind::Fn => DocData::Fn(FnData::from_ast(var, qual_name, preferred_prefix)),
+                        VariableKind::Const => DocData::Const(ConstData::from_ast(var, qual_name, preferred_prefix)),
                     };
 
                     dd.with_meta(&var.outer_attrs);
@@ -77,7 +79,7 @@ impl CollectionVisitor {
                     } else {
                         format!("std::{}::", self.name)
                     };
-                    let mut dd = DocData::Ty(TyData::from_ast(ty, qual_name));
+                    let mut dd = DocData::Ty(TyData::from_ast(ty, qual_name, preferred_prefix));
 
                     dd.with_meta(&ty.outer_attrs);
                     for a in &ty.outer_attrs {
@@ -200,6 +202,8 @@ impl DocData {
 #[derive(Debug, Clone)]
 pub struct ConstData {
     pub name: String,
+    /// How the const is indexed, etc.
+    pub preferred_name: String,
     /// The fully qualified name.
     pub qual_name: String,
     pub value: Option<String>,
@@ -216,7 +220,11 @@ pub struct ConstData {
 }
 
 impl ConstData {
-    fn from_ast(var: &crate::parsing::ast::types::VariableDeclaration, mut qual_name: String) -> Self {
+    fn from_ast(
+        var: &crate::parsing::ast::types::VariableDeclaration,
+        mut qual_name: String,
+        preferred_prefix: &str,
+    ) -> Self {
         assert_eq!(var.kind, crate::parsing::ast::types::VariableKind::Const);
 
         let (value, ty) = match &var.declaration.init {
@@ -240,6 +248,7 @@ impl ConstData {
         let name = var.declaration.id.name.clone();
         qual_name.push_str(&name);
         ConstData {
+            preferred_name: format!("{preferred_prefix}{name}"),
             name,
             qual_name,
             value,
@@ -272,7 +281,7 @@ impl ConstData {
             detail.push_str(ty);
         }
         CompletionItem {
-            label: self.name.clone(),
+            label: self.preferred_name.clone(),
             label_details: Some(CompletionItemLabelDetails {
                 detail: self.value.clone(),
                 description: None,
@@ -306,6 +315,8 @@ impl ConstData {
 pub struct FnData {
     /// The name of the function.
     pub name: String,
+    /// How the function is indexed, etc.
+    pub preferred_name: String,
     /// The fully qualified name.
     pub qual_name: String,
     /// The args of the function.
@@ -326,7 +337,11 @@ pub struct FnData {
 }
 
 impl FnData {
-    fn from_ast(var: &crate::parsing::ast::types::VariableDeclaration, mut qual_name: String) -> Self {
+    fn from_ast(
+        var: &crate::parsing::ast::types::VariableDeclaration,
+        mut qual_name: String,
+        preferred_prefix: &str,
+    ) -> Self {
         assert_eq!(var.kind, crate::parsing::ast::types::VariableKind::Fn);
         let crate::parsing::ast::types::Expr::FunctionExpression(expr) = &var.declaration.init else {
             unreachable!();
@@ -345,6 +360,7 @@ impl FnData {
         }
 
         FnData {
+            preferred_name: format!("{preferred_prefix}{name}"),
             name,
             qual_name,
             args: expr.params.iter().map(ArgData::from_ast).collect(),
@@ -443,7 +459,7 @@ impl FnData {
         }
         // We end with ${} so you can jump to the end of the snippet.
         // After the last argument.
-        format!("{}({})${{}}", self.name, args.join(", "))
+        format!("{}({})${{}}", self.preferred_name, args.join(", "))
     }
 
     fn to_signature_help(&self) -> SignatureHelp {
@@ -452,7 +468,7 @@ impl FnData {
 
         SignatureHelp {
             signatures: vec![SignatureInformation {
-                label: self.name.clone(),
+                label: self.preferred_name.clone(),
                 documentation: self.short_docs().map(|s| {
                     Documentation::MarkupContent(MarkupContent {
                         kind: MarkupKind::Markdown,
@@ -492,6 +508,7 @@ pub struct ArgData {
     pub ty: Option<String>,
     /// If the argument is required.
     pub kind: ArgKind,
+    pub override_in_snippet: Option<bool>,
     /// Additional information that could be used instead of the type's description.
     /// This is helpful if the type is really basic, like "number" -- that won't tell the user much about
     /// how this argument is meant to be used.
@@ -512,6 +529,7 @@ impl ArgData {
             name: arg.identifier.name.clone(),
             ty: arg.type_.as_ref().map(|t| t.to_string()),
             docs: None,
+            override_in_snippet: None,
             kind: if arg.labeled {
                 ArgKind::Labelled(arg.optional())
             } else {
@@ -519,26 +537,54 @@ impl ArgData {
             },
         };
 
+        for attr in &arg.identifier.outer_attrs {
+            if let Annotation {
+                name: None,
+                properties: Some(props),
+                ..
+            } = &attr.inner
+            {
+                for p in props {
+                    match &*p.key.name {
+                        "include_in_snippet" => {
+                            if let Some(b) = p.value.literal_bool() {
+                                result.override_in_snippet = Some(b);
+                            } else {
+                                panic!(
+                                    "Invalid value for `include_in_snippet`, expected bool literal, found {:?}",
+                                    p.value
+                                );
+                            }
+                        }
+                        _ => {}
+                    }
+                }
+            }
+        }
+
         result.with_comments(&arg.identifier.pre_comments);
         result
     }
 
     pub fn get_autocomplete_snippet(&self, index: usize) -> Option<(usize, String)> {
+        match self.override_in_snippet {
+            Some(false) => return None,
+            None if !self.kind.required() => return None,
+            _ => {}
+        }
+
         let label = if self.kind == ArgKind::Special {
             String::new()
         } else {
             format!("{} = ", self.name)
         };
         match self.ty.as_deref() {
-            Some(s) if ["Sketch", "Solid", "Plane | Face", "Sketch | Plane | Face"].contains(&s) => {
-                Some((index, format!("{label}${{{}:{}}}", index, "%")))
-            }
-            Some("number") if self.kind.required() => Some((index, format!(r#"{label}${{{}:3.14}}"#, index))),
-            Some("Point2d") if self.kind.required() => Some((
+            Some(s) if s.starts_with("number") => Some((index, format!(r#"{label}${{{}:3.14}}"#, index))),
+            Some("Point2d") => Some((
                 index + 1,
                 format!(r#"{label}[${{{}:3.14}}, ${{{}:3.14}}]"#, index, index + 1),
             )),
-            Some("Point3d") if self.kind.required() => Some((
+            Some("Point3d") => Some((
                 index + 2,
                 format!(
                     r#"{label}[${{{}:3.14}}, ${{{}:3.14}}, ${{{}:3.14}}]"#,
@@ -547,8 +593,10 @@ impl ArgData {
                     index + 2
                 ),
             )),
-            Some("string") if self.kind.required() => Some((index, format!(r#"{label}${{{}:"string"}}"#, index))),
-            Some("bool") if self.kind.required() => Some((index, format!(r#"{label}${{{}:false}}"#, index))),
+            Some("Axis2d | Edge") | Some("Axis3d | Edge") => Some((index, format!(r#"{label}${{{}:X}}"#, index))),
+
+            Some("string") => Some((index, format!(r#"{label}${{{}:"string"}}"#, index))),
+            Some("bool") => Some((index, format!(r#"{label}${{{}:false}}"#, index))),
             _ => None,
         }
     }
@@ -580,6 +628,8 @@ impl ArgKind {
 pub struct TyData {
     /// The name of the function.
     pub name: String,
+    /// How the type is indexed, etc.
+    pub preferred_name: String,
     /// The fully qualified name.
     pub qual_name: String,
     pub properties: Properties,
@@ -597,7 +647,11 @@ pub struct TyData {
 }
 
 impl TyData {
-    fn from_ast(ty: &crate::parsing::ast::types::TypeDeclaration, mut qual_name: String) -> Self {
+    fn from_ast(
+        ty: &crate::parsing::ast::types::TypeDeclaration,
+        mut qual_name: String,
+        preferred_prefix: &str,
+    ) -> Self {
         let name = ty.name.name.clone();
         qual_name.push_str(&name);
         let mut referenced_types = HashSet::new();
@@ -606,6 +660,7 @@ impl TyData {
         }
 
         TyData {
+            preferred_name: format!("{preferred_prefix}{name}"),
             name,
             qual_name,
             properties: Properties {
@@ -641,7 +696,7 @@ impl TyData {
 
     fn to_completion_item(&self) -> CompletionItem {
         CompletionItem {
-            label: self.name.clone(),
+            label: self.preferred_name.clone(),
             label_details: self.alias.as_ref().map(|t| CompletionItemLabelDetails {
                 detail: Some(format!("type {} = {t}", self.name)),
                 description: None,
@@ -658,7 +713,7 @@ impl TyData {
             preselect: None,
             sort_text: None,
             filter_text: None,
-            insert_text: Some(self.name.clone()),
+            insert_text: Some(self.preferred_name.clone()),
             insert_text_format: Some(InsertTextFormat::SNIPPET),
             insert_text_mode: None,
             text_edit: None,

rust/kcl-lib/src/docs/mod.rs

@@ -1000,9 +1000,12 @@ mod tests {
 
     #[test]
     fn get_autocomplete_snippet_revolve() {
-        let revolve_fn: Box<dyn StdLibFn> = Box::new(crate::std::revolve::Revolve);
-        let snippet = revolve_fn.to_autocomplete_snippet().unwrap();
-        assert_eq!(snippet, r#"revolve(${0:%}, axis = ${1:"X"})${}"#);
+        let data = kcl_doc::walk_prelude();
+        let DocData::Fn(revolve_fn) = data.into_iter().find(|d| d.name() == "revolve").unwrap() else {
+            panic!();
+        };
+        let snippet = revolve_fn.to_autocomplete_snippet();
+        assert_eq!(snippet, r#"revolve(axis = ${0:X})${}"#);
     }
 
     #[test]
@@ -1015,7 +1018,7 @@ mod tests {
         let snippet = circle_fn.to_autocomplete_snippet();
         assert_eq!(
             snippet,
-            r#"circle(${0:%}, center = [${1:3.14}, ${2:3.14}], radius = ${3:3.14})${}"#
+            r#"circle(center = [${0:3.14}, ${1:3.14}], radius = ${2:3.14})${}"#
         );
     }
 
@@ -1089,11 +1092,14 @@ mod tests {
     #[test]
     #[allow(clippy::literal_string_with_formatting_args)]
     fn get_autocomplete_snippet_helix() {
-        let helix_fn: Box<dyn StdLibFn> = Box::new(crate::std::helix::Helix);
-        let snippet = helix_fn.to_autocomplete_snippet().unwrap();
+        let data = kcl_doc::walk_prelude();
+        let DocData::Fn(helix_fn) = data.into_iter().find(|d| d.name() == "helix").unwrap() else {
+            panic!();
+        };
+        let snippet = helix_fn.to_autocomplete_snippet();
         assert_eq!(
             snippet,
-            r#"helix(revolutions = ${0:3.14}, angleStart = ${1:3.14}, radius = ${2:3.14}, axis = ${3:"X"}, length = ${4:3.14})${}"#
+            r#"helix(revolutions = ${0:3.14}, angleStart = ${1:3.14}, radius = ${2:3.14}, axis = ${3:X}, length = ${4:3.14})${}"#
         );
     }
 

rust/kcl-lib/src/execution/cad_op.rs

@@ -27,6 +27,19 @@ pub enum Operation {
         is_error: bool,
     },
     #[serde(rename_all = "camelCase")]
+    KclStdLibCall {
+        name: String,
+        /// The unlabeled argument to the function.
+        unlabeled_arg: Option<OpArg>,
+        /// The labeled keyword arguments to the function.
+        labeled_args: IndexMap<String, OpArg>,
+        /// The source range of the operation in the source code.
+        source_range: SourceRange,
+        /// True if the operation resulted in an error.
+        #[serde(default, skip_serializing_if = "is_false")]
+        is_error: bool,
+    },
+    #[serde(rename_all = "camelCase")]
     UserDefinedFunctionCall {
         /// The name of the user-defined function being called.  Anonymous
         /// functions have no name.
@@ -49,6 +62,7 @@ impl Operation {
     pub(crate) fn set_std_lib_call_is_error(&mut self, is_err: bool) {
         match self {
             Self::StdLibCall { ref mut is_error, .. } => *is_error = is_err,
+            Self::KclStdLibCall { ref mut is_error, .. } => *is_error = is_err,
             Self::UserDefinedFunctionCall { .. } | Self::UserDefinedFunctionReturn => {}
         }
     }

rust/kcl-lib/src/execution/exec_ast.rs

@@ -3,7 +3,7 @@ use std::collections::HashMap;
 use async_recursion::async_recursion;
 use indexmap::IndexMap;
 
-use super::kcl_value::TypeDef;
+use super::{kcl_value::TypeDef, types::PrimitiveType};
 use crate::{
     engine::ExecutionKind,
     errors::{KclError, KclErrorDetails},
@@ -1031,6 +1031,15 @@ impl Node<UnaryExpression> {
         }
 
         let value = &self.argument.get_result(exec_state, ctx).await?;
+        let err = || {
+            KclError::Semantic(KclErrorDetails {
+                message: format!(
+                    "You can only negate numbers, planes, or lines, but this is a {}",
+                    value.human_friendly_type()
+                ),
+                source_ranges: vec![self.into()],
+            })
+        };
         match value {
             KclValue::Number { value, ty, .. } => {
                 let meta = vec![Metadata {
@@ -1052,13 +1061,63 @@ impl Node<UnaryExpression> {
                 plane.id = exec_state.next_uuid();
                 Ok(KclValue::Plane { value: plane })
             }
-            _ => Err(KclError::Semantic(KclErrorDetails {
-                message: format!(
-                    "You can only negate numbers or planes, but this is a {}",
-                    value.human_friendly_type()
-                ),
-                source_ranges: vec![self.into()],
-            })),
+            KclValue::Object { value: values, meta } => {
+                // Special-case for negating line-like objects.
+                let Some(direction) = values.get("direction") else {
+                    return Err(err());
+                };
+
+                let direction = match direction {
+                    KclValue::MixedArray { value: values, meta } => {
+                        let values = values
+                            .iter()
+                            .map(|v| match v {
+                                KclValue::Number { value, ty, meta } => Ok(KclValue::Number {
+                                    value: *value * -1.0,
+                                    ty: ty.clone(),
+                                    meta: meta.clone(),
+                                }),
+                                _ => Err(err()),
+                            })
+                            .collect::<Result<Vec<_>, _>>()?;
+
+                        KclValue::MixedArray {
+                            value: values,
+                            meta: meta.clone(),
+                        }
+                    }
+                    KclValue::HomArray {
+                        value: values,
+                        ty: ty @ RuntimeType::Primitive(PrimitiveType::Number(_)),
+                    } => {
+                        let values = values
+                            .iter()
+                            .map(|v| match v {
+                                KclValue::Number { value, ty, meta } => Ok(KclValue::Number {
+                                    value: *value * -1.0,
+                                    ty: ty.clone(),
+                                    meta: meta.clone(),
+                                }),
+                                _ => Err(err()),
+                            })
+                            .collect::<Result<Vec<_>, _>>()?;
+
+                        KclValue::HomArray {
+                            value: values,
+                            ty: ty.clone(),
+                        }
+                    }
+                    _ => return Err(err()),
+                };
+
+                let mut value = values.clone();
+                value.insert("direction".to_owned(), direction);
+                Ok(KclValue::Object {
+                    value,
+                    meta: meta.clone(),
+                })
+            }
+            _ => Err(err()),
         }
     }
 }
@@ -2145,6 +2204,27 @@ impl FunctionSource {
                     }
                 }
 
+                let op = if props.include_in_feature_tree {
+                    let op_labeled_args = args
+                        .kw_args
+                        .labeled
+                        .iter()
+                        .map(|(k, arg)| (k.clone(), OpArg::new(OpKclValue::from(&arg.value), arg.source_range)))
+                        .collect();
+                    Some(Operation::KclStdLibCall {
+                        // TODO
+                        name: String::new(),
+                        unlabeled_arg: args
+                            .unlabeled_kw_arg_unconverted()
+                            .map(|arg| OpArg::new(OpKclValue::from(&arg.value), arg.source_range)),
+                        labeled_args: op_labeled_args,
+                        source_range: callsite,
+                        is_error: false,
+                    })
+                } else {
+                    None
+                };
+
                 // Attempt to call the function.
                 exec_state.mut_stack().push_new_env_for_rust_call();
                 let mut result = {
@@ -2152,7 +2232,15 @@ impl FunctionSource {
                     let result = func(exec_state, args).await;
                     exec_state.mut_stack().pop_env();
 
-                    // TODO support recording op into the feature tree
+                    if let Some(mut op) = op {
+                        op.set_std_lib_call_is_error(result.is_err());
+                        // Track call operation.  We do this after the call
+                        // since things like patternTransform may call user code
+                        // before running, and we will likely want to use the
+                        // return value. The call takes ownership of the args,
+                        // so we need to build the op before the call.
+                        exec_state.global.operations.push(op);
+                    }
                     result
                 }?;
 

rust/kcl-lib/src/execution/types.rs

@@ -56,6 +56,20 @@ impl RuntimeType {
         RuntimeType::Primitive(PrimitiveType::ImportedGeometry)
     }
 
+    /// `[number; 2]`
+    pub fn point2d() -> Self {
+        RuntimeType::Array(Box::new(RuntimeType::number_any()), ArrayLen::Known(2))
+    }
+
+    /// `[number; 3]`
+    pub fn point3d() -> Self {
+        RuntimeType::Array(Box::new(RuntimeType::number_any()), ArrayLen::Known(3))
+    }
+
+    pub fn number_any() -> Self {
+        RuntimeType::Primitive(PrimitiveType::Number(NumericType::Any))
+    }
+
     pub fn from_parsed(
         value: Type,
         exec_state: &mut ExecState,
@@ -93,24 +107,30 @@ impl RuntimeType {
             AstPrimitiveType::Number(suffix) => RuntimeType::Primitive(PrimitiveType::Number(
                 NumericType::from_parsed(suffix, &exec_state.mod_local.settings),
             )),
-            AstPrimitiveType::Named(name) => {
-                let ty_val = exec_state
-                    .stack()
-                    .get(&format!("{}{}", memory::TYPE_PREFIX, name.name), source_range)
-                    .map_err(|_| CompilationError::err(source_range, format!("Unknown type: {}", name.name)))?;
-
-                match ty_val {
-                    KclValue::Type { value, .. } => match value {
-                        TypeDef::RustRepr(ty, _) => RuntimeType::Primitive(ty.clone()),
-                        TypeDef::Alias(ty) => ty.clone(),
-                    },
-                    _ => unreachable!(),
-                }
-            }
+            AstPrimitiveType::Named(name) => Self::from_alias(&name.name, exec_state, source_range)?,
             AstPrimitiveType::Tag => RuntimeType::Primitive(PrimitiveType::Tag),
         })
     }
 
+    pub fn from_alias(
+        alias: &str,
+        exec_state: &mut ExecState,
+        source_range: SourceRange,
+    ) -> Result<Self, CompilationError> {
+        let ty_val = exec_state
+            .stack()
+            .get(&format!("{}{}", memory::TYPE_PREFIX, alias), source_range)
+            .map_err(|_| CompilationError::err(source_range, format!("Unknown type: {}", alias)))?;
+
+        Ok(match ty_val {
+            KclValue::Type { value, .. } => match value {
+                TypeDef::RustRepr(ty, _) => RuntimeType::Primitive(ty.clone()),
+                TypeDef::Alias(ty) => ty.clone(),
+            },
+            _ => unreachable!(),
+        })
+    }
+
     pub fn human_friendly_type(&self) -> String {
         match self {
             RuntimeType::Primitive(ty) => ty.to_string(),
@@ -143,6 +163,35 @@ impl RuntimeType {
             (Object(t1), Object(t2)) => t2
                 .iter()
                 .all(|(f, t)| t1.iter().any(|(ff, tt)| f == ff && tt.subtype(t))),
+            // Equality between Axis types and there object representation.
+            (Object(t1), Primitive(PrimitiveType::Axis2d)) => {
+                t1.iter()
+                    .any(|(n, t)| n == "origin" && t.subtype(&RuntimeType::point2d()))
+                    && t1
+                        .iter()
+                        .any(|(n, t)| n == "direction" && t.subtype(&RuntimeType::point2d()))
+            }
+            (Object(t1), Primitive(PrimitiveType::Axis3d)) => {
+                t1.iter()
+                    .any(|(n, t)| n == "origin" && t.subtype(&RuntimeType::point3d()))
+                    && t1
+                        .iter()
+                        .any(|(n, t)| n == "direction" && t.subtype(&RuntimeType::point3d()))
+            }
+            (Primitive(PrimitiveType::Axis2d), Object(t2)) => {
+                t2.iter()
+                    .any(|(n, t)| n == "origin" && t.subtype(&RuntimeType::point2d()))
+                    && t2
+                        .iter()
+                        .any(|(n, t)| n == "direction" && t.subtype(&RuntimeType::point2d()))
+            }
+            (Primitive(PrimitiveType::Axis3d), Object(t2)) => {
+                t2.iter()
+                    .any(|(n, t)| n == "origin" && t.subtype(&RuntimeType::point3d()))
+                    && t2
+                        .iter()
+                        .any(|(n, t)| n == "direction" && t.subtype(&RuntimeType::point3d()))
+            }
             _ => false,
         }
     }
@@ -213,11 +262,11 @@ impl ArrayLen {
     }
 
     /// True if the length constraint is satisfied by the supplied length.
-    fn satisfied(self, len: usize) -> bool {
+    fn satisfied(self, len: usize, allow_shrink: bool) -> Option<usize> {
         match self {
-            ArrayLen::None => true,
-            ArrayLen::NonEmpty => len > 0,
-            ArrayLen::Known(s) => len == s,
+            ArrayLen::None => Some(len),
+            ArrayLen::NonEmpty => (len > 0).then_some(len),
+            ArrayLen::Known(s) => (if allow_shrink { len >= s } else { len == s }).then_some(s),
         }
     }
 }
@@ -233,6 +282,9 @@ pub enum PrimitiveType {
     Plane,
     Helix,
     Face,
+    Edge,
+    Axis2d,
+    Axis3d,
     ImportedGeometry,
 }
 
@@ -248,6 +300,9 @@ impl PrimitiveType {
             PrimitiveType::Plane => "Planes".to_owned(),
             PrimitiveType::Helix => "Helices".to_owned(),
             PrimitiveType::Face => "Faces".to_owned(),
+            PrimitiveType::Edge => "Edges".to_owned(),
+            PrimitiveType::Axis2d => "2d axes".to_owned(),
+            PrimitiveType::Axis3d => "3d axes".to_owned(),
             PrimitiveType::ImportedGeometry => "imported geometries".to_owned(),
             PrimitiveType::Tag => "tags".to_owned(),
         }
@@ -273,6 +328,9 @@ impl fmt::Display for PrimitiveType {
             PrimitiveType::Solid => write!(f, "Solid"),
             PrimitiveType::Plane => write!(f, "Plane"),
             PrimitiveType::Face => write!(f, "Face"),
+            PrimitiveType::Edge => write!(f, "Edge"),
+            PrimitiveType::Axis2d => write!(f, "Axis2d"),
+            PrimitiveType::Axis3d => write!(f, "Axis3d"),
             PrimitiveType::Helix => write!(f, "Helix"),
             PrimitiveType::ImportedGeometry => write!(f, "imported geometry"),
         }
@@ -298,6 +356,10 @@ impl NumericType {
         NumericType::Known(UnitType::Count)
     }
 
+    pub fn mm() -> Self {
+        NumericType::Known(UnitType::Length(UnitLen::Mm))
+    }
+
     /// Combine two types when we expect them to be equal.
     pub fn combine_eq(self, other: &NumericType) -> NumericType {
         if &self == other {
@@ -541,7 +603,7 @@ impl KclValue {
     pub fn coerce(&self, ty: &RuntimeType, exec_state: &mut ExecState) -> Option<KclValue> {
         match ty {
             RuntimeType::Primitive(ty) => self.coerce_to_primitive_type(ty, exec_state),
-            RuntimeType::Array(ty, len) => self.coerce_to_array_type(ty, *len, exec_state),
+            RuntimeType::Array(ty, len) => self.coerce_to_array_type(ty, *len, exec_state, false),
             RuntimeType::Tuple(tys) => self.coerce_to_tuple_type(tys, exec_state),
             RuntimeType::Union(tys) => self.coerce_to_union_type(tys, exec_state),
             RuntimeType::Object(tys) => self.coerce_to_object_type(tys, exec_state),
@@ -609,6 +671,55 @@ impl KclValue {
                 KclValue::Helix { .. } => Some(value.clone()),
                 _ => None,
             },
+            PrimitiveType::Edge => match value {
+                KclValue::Uuid { .. } => Some(value.clone()),
+                KclValue::TagIdentifier { .. } => Some(value.clone()),
+                _ => None,
+            },
+            PrimitiveType::Axis2d => match value {
+                KclValue::Object { value: values, meta } => {
+                    if values.get("origin")?.has_type(&RuntimeType::point2d())
+                        && values.get("direction")?.has_type(&RuntimeType::point2d())
+                    {
+                        return Some(value.clone());
+                    }
+
+                    let origin = values.get("origin").and_then(|p| {
+                        p.coerce_to_array_type(&RuntimeType::number_any(), ArrayLen::Known(2), exec_state, true)
+                    })?;
+                    let direction = values.get("direction").and_then(|p| {
+                        p.coerce_to_array_type(&RuntimeType::number_any(), ArrayLen::Known(2), exec_state, true)
+                    })?;
+
+                    Some(KclValue::Object {
+                        value: [("origin".to_owned(), origin), ("direction".to_owned(), direction)].into(),
+                        meta: meta.clone(),
+                    })
+                }
+                _ => None,
+            },
+            PrimitiveType::Axis3d => match value {
+                KclValue::Object { value: values, meta } => {
+                    if values.get("origin")?.has_type(&RuntimeType::point3d())
+                        && values.get("direction")?.has_type(&RuntimeType::point3d())
+                    {
+                        return Some(value.clone());
+                    }
+
+                    let origin = values.get("origin").and_then(|p| {
+                        p.coerce_to_array_type(&RuntimeType::number_any(), ArrayLen::Known(3), exec_state, true)
+                    })?;
+                    let direction = values.get("direction").and_then(|p| {
+                        p.coerce_to_array_type(&RuntimeType::number_any(), ArrayLen::Known(3), exec_state, true)
+                    })?;
+
+                    Some(KclValue::Object {
+                        value: [("origin".to_owned(), origin), ("direction".to_owned(), direction)].into(),
+                        meta: meta.clone(),
+                    })
+                }
+                _ => None,
+            },
             PrimitiveType::ImportedGeometry => match value {
                 KclValue::ImportedGeometry { .. } => Some(value.clone()),
                 _ => None,
@@ -621,60 +732,35 @@ impl KclValue {
         }
     }
 
-    fn coerce_to_array_type(&self, ty: &RuntimeType, len: ArrayLen, exec_state: &mut ExecState) -> Option<KclValue> {
+    fn coerce_to_array_type(
+        &self,
+        ty: &RuntimeType,
+        len: ArrayLen,
+        exec_state: &mut ExecState,
+        allow_shrink: bool,
+    ) -> Option<KclValue> {
         match self {
-            KclValue::HomArray { value, ty: aty } if aty == ty => {
-                let value = match len {
-                    ArrayLen::None => value.clone(),
-                    ArrayLen::NonEmpty => {
-                        if value.is_empty() {
-                            return None;
-                        }
-
-                        value.clone()
-                    }
-                    ArrayLen::Known(n) => {
-                        if n != value.len() {
-                            return None;
-                        }
-
-                        value[..n].to_vec()
-                    }
-                };
-
-                Some(KclValue::HomArray { value, ty: ty.clone() })
+            KclValue::HomArray { value, ty: aty } if aty.subtype(ty) => {
+                len.satisfied(value.len(), allow_shrink).map(|len| KclValue::HomArray {
+                    value: value[..len].to_vec(),
+                    ty: aty.clone(),
+                })
             }
-            value if len.satisfied(1) && value.has_type(ty) => Some(KclValue::HomArray {
+            value if len.satisfied(1, false).is_some() && value.has_type(ty) => Some(KclValue::HomArray {
                 value: vec![value.clone()],
                 ty: ty.clone(),
             }),
             KclValue::MixedArray { value, .. } => {
-                let value = match len {
-                    ArrayLen::None => value.clone(),
-                    ArrayLen::NonEmpty => {
-                        if value.is_empty() {
-                            return None;
-                        }
+                let len = len.satisfied(value.len(), allow_shrink)?;
 
-                        value.clone()
-                    }
-                    ArrayLen::Known(n) => {
-                        if n != value.len() {
-                            return None;
-                        }
-
-                        value[..n].to_vec()
-                    }
-                };
-
-                let value = value
+                let value = value[..len]
                     .iter()
                     .map(|v| v.coerce(ty, exec_state))
                     .collect::<Option<Vec<_>>>()?;
 
                 Some(KclValue::HomArray { value, ty: ty.clone() })
             }
-            KclValue::KclNone { .. } if len.satisfied(0) => Some(KclValue::HomArray {
+            KclValue::KclNone { .. } if len.satisfied(0, false).is_some() => Some(KclValue::HomArray {
                 value: Vec::new(),
                 ty: ty.clone(),
             }),
@@ -1251,4 +1337,119 @@ mod test {
         assert!(count.coerce(&tyb, &mut exec_state).is_none());
         assert!(count.coerce(&tyb2, &mut exec_state).is_none());
     }
+
+    #[tokio::test(flavor = "multi_thread")]
+    async fn coerce_axes() {
+        let mut exec_state = ExecState::new(&crate::ExecutorContext::new_mock().await);
+
+        // Subtyping
+        assert!(RuntimeType::Primitive(PrimitiveType::Axis2d).subtype(&RuntimeType::Primitive(PrimitiveType::Axis2d)));
+        assert!(RuntimeType::Primitive(PrimitiveType::Axis3d).subtype(&RuntimeType::Primitive(PrimitiveType::Axis3d)));
+        assert!(!RuntimeType::Primitive(PrimitiveType::Axis3d).subtype(&RuntimeType::Primitive(PrimitiveType::Axis2d)));
+        assert!(!RuntimeType::Primitive(PrimitiveType::Axis2d).subtype(&RuntimeType::Primitive(PrimitiveType::Axis3d)));
+
+        // Coercion
+        let a2d = KclValue::Object {
+            value: [
+                (
+                    "origin".to_owned(),
+                    KclValue::HomArray {
+                        value: vec![
+                            KclValue::Number {
+                                value: 0.0,
+                                ty: NumericType::mm(),
+                                meta: Vec::new(),
+                            },
+                            KclValue::Number {
+                                value: 0.0,
+                                ty: NumericType::mm(),
+                                meta: Vec::new(),
+                            },
+                        ],
+                        ty: RuntimeType::Primitive(PrimitiveType::Number(NumericType::mm())),
+                    },
+                ),
+                (
+                    "direction".to_owned(),
+                    KclValue::HomArray {
+                        value: vec![
+                            KclValue::Number {
+                                value: 1.0,
+                                ty: NumericType::mm(),
+                                meta: Vec::new(),
+                            },
+                            KclValue::Number {
+                                value: 0.0,
+                                ty: NumericType::mm(),
+                                meta: Vec::new(),
+                            },
+                        ],
+                        ty: RuntimeType::Primitive(PrimitiveType::Number(NumericType::mm())),
+                    },
+                ),
+            ]
+            .into(),
+            meta: Vec::new(),
+        };
+        let a3d = KclValue::Object {
+            value: [
+                (
+                    "origin".to_owned(),
+                    KclValue::HomArray {
+                        value: vec![
+                            KclValue::Number {
+                                value: 0.0,
+                                ty: NumericType::mm(),
+                                meta: Vec::new(),
+                            },
+                            KclValue::Number {
+                                value: 0.0,
+                                ty: NumericType::mm(),
+                                meta: Vec::new(),
+                            },
+                            KclValue::Number {
+                                value: 0.0,
+                                ty: NumericType::mm(),
+                                meta: Vec::new(),
+                            },
+                        ],
+                        ty: RuntimeType::Primitive(PrimitiveType::Number(NumericType::mm())),
+                    },
+                ),
+                (
+                    "direction".to_owned(),
+                    KclValue::HomArray {
+                        value: vec![
+                            KclValue::Number {
+                                value: 1.0,
+                                ty: NumericType::mm(),
+                                meta: Vec::new(),
+                            },
+                            KclValue::Number {
+                                value: 0.0,
+                                ty: NumericType::mm(),
+                                meta: Vec::new(),
+                            },
+                            KclValue::Number {
+                                value: 1.0,
+                                ty: NumericType::mm(),
+                                meta: Vec::new(),
+                            },
+                        ],
+                        ty: RuntimeType::Primitive(PrimitiveType::Number(NumericType::mm())),
+                    },
+                ),
+            ]
+            .into(),
+            meta: Vec::new(),
+        };
+
+        let ty2d = RuntimeType::Primitive(PrimitiveType::Axis2d);
+        let ty3d = RuntimeType::Primitive(PrimitiveType::Axis3d);
+
+        assert_coerce_results(&a2d, &ty2d, &a2d, &mut exec_state);
+        assert_coerce_results(&a3d, &ty3d, &a3d, &mut exec_state);
+        assert_coerce_results(&a3d, &ty2d, &a2d, &mut exec_state);
+        assert!(a2d.coerce(&ty3d, &mut exec_state).is_none());
+    }
 }

rust/kcl-lib/src/lint/checks/camel_case.rs

@@ -120,7 +120,7 @@ const Part001 = startSketchOn('XY')
   |> line([0, pipeLength], %)
   |> angledLineToX({ angle: 60, to: pipeLargeDia }, %)
   |> close()
-  |> revolve({ axis: 'y' }, %)
+  |> revolve({ axis = Y }, %)
 "
     );
 
@@ -156,7 +156,7 @@ const part001 = startSketchOn('XY')
   |> line([0, pipeLength], %)
   |> angledLineToX({ angle: 60, to: pipeLargeDia }, %)
   |> close()
-  |> revolve({ axis: 'y' }, %)
+  |> revolve({ axis = Y }, %)
 "
     );
 

rust/kcl-lib/src/lsp/tests.rs

@@ -1632,7 +1632,7 @@ insideRevolve = startSketchOn(XZ)
   |> line(end = [0, -thickness])
   |> line(end = [-overHangLength, 0])
   |> close()
-  |> revolve({ axis: 'y' }, %)
+  |> revolve({ axis = Y }, %)
 
 // Sketch and revolve one of the balls and duplicate it using a circular pattern. (This is currently a workaround, we have a bug with rotating on a sketch that touches the rotation axis)
 sphere = startSketchOn(XZ)
@@ -1647,7 +1647,7 @@ sphere = startSketchOn(XZ)
        radius: sphereDia / 2 - 0.05
      }, %)
   |> close()
-  |> revolve({ axis: 'x' }, %)
+  |> revolve({ axis = X }, %)
   |> patternCircular3d(
        axis = [0, 0, 1],
        center = [0, 0, 0],
@@ -1671,7 +1671,7 @@ outsideRevolve = startSketchOn(XZ)
   |> line(end = [0, thickness])
   |> line(end = [overHangLength - thickness, 0])
   |> close()
-  |> revolve({ axis: 'y' }, %)"#
+  |> revolve({ axis = Y }, %)"#
                     .to_string(),
             },
         })
@@ -1705,7 +1705,7 @@ outsideRevolve = startSketchOn(XZ)
             start: tower_lsp::lsp_types::Position { line: 0, character: 0 },
             end: tower_lsp::lsp_types::Position {
                 line: 60,
-                character: 30
+                character: 29
             }
         }
     );
@@ -1732,7 +1732,7 @@ insideRevolve = startSketchOn(XZ)
   |> line(end = [0, -thickness])
   |> line(end = [-overHangLength, 0])
   |> close()
-  |> revolve({ axis = 'y' }, %)
+  |> revolve({ axis = Y }, %)
 
 // Sketch and revolve one of the balls and duplicate it using a circular pattern. (This is currently a workaround, we have a bug with rotating on a sketch that touches the rotation axis)
 sphere = startSketchOn(XZ)
@@ -1747,7 +1747,7 @@ sphere = startSketchOn(XZ)
        radius = sphereDia / 2 - 0.05
      }, %)
   |> close()
-  |> revolve({ axis = 'x' }, %)
+  |> revolve({ axis = X }, %)
   |> patternCircular3d(
        axis = [0, 0, 1],
        center = [0, 0, 0],
@@ -1771,7 +1771,7 @@ outsideRevolve = startSketchOn(XZ)
   |> line(end = [0, thickness])
   |> line(end = [overHangLength - thickness, 0])
   |> close()
-  |> revolve({ axis = 'y' }, %)"#
+  |> revolve({ axis = Y }, %)"#
     );
 }
 

rust/kcl-lib/src/modules.rs

@@ -88,6 +88,7 @@ pub(crate) fn read_std(mod_name: &str) -> Option<&'static str> {
         "prelude" => Some(include_str!("../std/prelude.kcl")),
         "math" => Some(include_str!("../std/math.kcl")),
         "sketch" => Some(include_str!("../std/sketch.kcl")),
+        "turns" => Some(include_str!("../std/turns.kcl")),
         _ => None,
     }
 }

rust/kcl-lib/src/parsing/ast/types/mod.rs

@@ -1609,19 +1609,21 @@ impl ImportStatement {
             return Some(alias.name.clone());
         }
 
-        let mut parts = match &self.path {
-            ImportPath::Kcl { filename: s } | ImportPath::Foreign { path: s } => s.split('.'),
-            _ => return None,
-        };
-        let path = parts.next()?;
-        let _ext = parts.next()?;
-        let rest = parts.next();
+        match &self.path {
+            ImportPath::Kcl { filename: s } | ImportPath::Foreign { path: s } => {
+                let mut parts = s.split('.');
+                let path = parts.next()?;
+                let _ext = parts.next()?;
+                let rest = parts.next();
 
-        if rest.is_some() {
-            return None;
+                if rest.is_some() {
+                    return None;
+                }
+
+                path.rsplit(&['/', '\\']).next().map(str::to_owned)
+            }
+            ImportPath::Std { path } => path.last().cloned(),
         }
-
-        path.rsplit(&['/', '\\']).next().map(str::to_owned)
     }
 }
 

rust/kcl-lib/src/parsing/mod.rs

@@ -152,7 +152,12 @@ const STR_DEPRECATIONS: [(&str, &str); 6] = [
     ("-YZ", "-YZ"),
 ];
 const FN_DEPRECATIONS: [(&str, &str); 3] = [("pi", "PI"), ("e", "E"), ("tau", "TAU")];
-const CONST_DEPRECATIONS: [(&str, &str); 0] = [];
+const CONST_DEPRECATIONS: [(&str, &str); 4] = [
+    ("ZERO", "turns::ZERO"),
+    ("QUARTER_TURN", "turns::QUARTER_TURN"),
+    ("HALF_TURN", "turns::HALF_TURN"),
+    ("THREE_QUARTER_TURN", "turns::THREE_QUARTER_TURN"),
+];
 
 #[derive(Clone, Copy)]
 pub enum DeprecationKind {

rust/kcl-lib/src/parsing/parser.rs

@@ -286,6 +286,11 @@ fn non_code_node(i: &mut TokenSlice) -> PResult<Node<NonCodeNode>> {
     alt((non_code_node_leading_whitespace, non_code_node_no_leading_whitespace)).parse_next(i)
 }
 
+fn outer_annotation(i: &mut TokenSlice) -> PResult<Node<Annotation>> {
+    peek((at_sign, open_paren)).parse_next(i)?;
+    annotation(i)
+}
+
 fn annotation(i: &mut TokenSlice) -> PResult<Node<Annotation>> {
     let at = at_sign.parse_next(i)?;
     let name = opt(binding_name).parse_next(i)?;
@@ -1823,14 +1828,6 @@ fn import_stmt(i: &mut TokenSlice) -> PResult<BoxNode<ImportStatement>> {
             )
             .into(),
         ));
-    } else if matches!(path, ImportPath::Std { .. }) && matches!(selector, ImportSelector::None { .. }) {
-        return Err(ErrMode::Cut(
-            CompilationError::fatal(
-                SourceRange::new(start, end, module_id),
-                "the standard library cannot be imported as a part",
-            )
-            .into(),
-        ));
     }
 
     Ok(Node::boxed(
@@ -2910,13 +2907,17 @@ struct ParamDescription {
     arg_name: Token,
     type_: std::option::Option<Node<Type>>,
     default_value: Option<DefaultParamVal>,
+    attr: Option<Node<Annotation>>,
     comments: Option<Node<Vec<String>>>,
 }
 
 fn parameter(i: &mut TokenSlice) -> PResult<ParamDescription> {
-    let (_, comments, found_at_sign, arg_name, question_mark, _, type_, _ws, default_literal) = (
+    let (_, comments, _, attr, _, found_at_sign, arg_name, question_mark, _, type_, _ws, default_literal) = (
         opt(whitespace),
         opt(comments),
+        opt(whitespace),
+        opt(outer_annotation),
+        opt(whitespace),
         opt(at_sign),
         any.verify(|token: &Token| !matches!(token.token_type, TokenType::Brace) || token.value != ")"),
         opt(question_mark),
@@ -2941,6 +2942,7 @@ fn parameter(i: &mut TokenSlice) -> PResult<ParamDescription> {
                 return Err(ErrMode::Backtrack(ContextError::from(e)));
             }
         },
+        attr,
         comments,
     })
 }
@@ -2962,6 +2964,7 @@ fn parameters(i: &mut TokenSlice) -> PResult<Vec<Parameter>> {
                  arg_name,
                  type_,
                  default_value,
+                 attr,
                  comments,
              }| {
                 let mut identifier = Node::<Identifier>::try_from(arg_name)?;
@@ -2969,6 +2972,9 @@ fn parameters(i: &mut TokenSlice) -> PResult<Vec<Parameter>> {
                     identifier.comment_start = comments.start;
                     identifier.pre_comments = comments.inner;
                 }
+                if let Some(attr) = attr {
+                    identifier.outer_attrs.push(attr);
+                }
 
                 Ok(Parameter {
                     identifier,

rust/kcl-lib/src/std/appearance.rs

@@ -75,7 +75,7 @@ pub async fn appearance(exec_state: &mut ExecState, args: Args) -> Result<KclVal
 /// This will work on any solid, including extruded solids, revolved solids, and shelled solids.
 /// ```no_run
 /// // Add color to an extruded solid.
-/// exampleSketch = startSketchOn("XZ")
+/// exampleSketch = startSketchOn(XZ)
 ///   |> startProfileAt([0, 0], %)
 ///   |> line(endAbsolute = [10, 0])
 ///   |> line(endAbsolute = [0, 10])
@@ -89,9 +89,9 @@ pub async fn appearance(exec_state: &mut ExecState, args: Args) -> Result<KclVal
 ///
 /// ```no_run
 /// // Add color to a revolved solid.
-/// sketch001 = startSketchOn('XY')
+/// sketch001 = startSketchOn(XY)
 ///     |> circle( center = [15, 0], radius = 5 )
-///     |> revolve( angle = 360, axis = 'y')
+///     |> revolve( angle = 360, axis = Y)
 ///     |> appearance(
 ///         color = '#ff0000',
 ///         metalness = 90,
@@ -102,7 +102,7 @@ pub async fn appearance(exec_state: &mut ExecState, args: Args) -> Result<KclVal
 /// ```no_run
 /// // Add color to different solids.
 /// fn cube(center) {
-///    return startSketchOn('XY')
+///    return startSketchOn(XY)
 ///    |> startProfileAt([center[0] - 10, center[1] - 10], %)
 ///    |> line(endAbsolute = [center[0] + 10, center[1] - 10])
 ///     |> line(endAbsolute = [center[0] + 10, center[1] + 10])
@@ -122,7 +122,7 @@ pub async fn appearance(exec_state: &mut ExecState, args: Args) -> Result<KclVal
 /// ```no_run
 /// // You can set the appearance before or after you shell it will yield the same result.
 /// // This example shows setting the appearance _after_ the shell.
-/// firstSketch = startSketchOn('XY')
+/// firstSketch = startSketchOn(XY)
 ///     |> startProfileAt([-12, 12], %)
 ///     |> line(end = [24, 0])
 ///     |> line(end = [0, -24])
@@ -145,7 +145,7 @@ pub async fn appearance(exec_state: &mut ExecState, args: Args) -> Result<KclVal
 /// ```no_run
 /// // You can set the appearance before or after you shell it will yield the same result.
 /// // This example shows setting the appearance _before_ the shell.
-/// firstSketch = startSketchOn('XY')
+/// firstSketch = startSketchOn(XY)
 ///     |> startProfileAt([-12, 12], %)
 ///     |> line(end = [24, 0])
 ///     |> line(end = [0, -24])
@@ -168,7 +168,7 @@ pub async fn appearance(exec_state: &mut ExecState, args: Args) -> Result<KclVal
 /// ```no_run
 /// // Setting the appearance of a 3D pattern can be done _before_ or _after_ the pattern.
 /// // This example shows _before_ the pattern.
-/// exampleSketch = startSketchOn('XZ')
+/// exampleSketch = startSketchOn(XZ)
 ///   |> startProfileAt([0, 0], %)
 ///   |> line(end = [0, 2])
 ///   |> line(end = [3, 1])
@@ -191,7 +191,7 @@ pub async fn appearance(exec_state: &mut ExecState, args: Args) -> Result<KclVal
 /// ```no_run
 /// // Setting the appearance of a 3D pattern can be done _before_ or _after_ the pattern.
 /// // This example shows _after_ the pattern.
-/// exampleSketch = startSketchOn('XZ')
+/// exampleSketch = startSketchOn(XZ)
 ///   |> startProfileAt([0, 0], %)
 ///   |> line(end = [0, 2])
 ///   |> line(end = [3, 1])
@@ -213,7 +213,7 @@ pub async fn appearance(exec_state: &mut ExecState, args: Args) -> Result<KclVal
 ///
 /// ```no_run
 /// // Color the result of a 2D pattern that was extruded.
-/// exampleSketch = startSketchOn('XZ')
+/// exampleSketch = startSketchOn(XZ)
 ///   |> startProfileAt([.5, 25], %)
 ///   |> line(end = [0, 5])
 ///   |> line(end = [-1, 0])
@@ -238,7 +238,7 @@ pub async fn appearance(exec_state: &mut ExecState, args: Args) -> Result<KclVal
 /// // Color the result of a sweep.
 ///
 /// // Create a path for the sweep.
-/// sweepPath = startSketchOn('XZ')
+/// sweepPath = startSketchOn(XZ)
 ///     |> startProfileAt([0.05, 0.05], %)
 ///     |> line(end = [0, 7])
 ///     |> tangentialArc({
@@ -252,13 +252,13 @@ pub async fn appearance(exec_state: &mut ExecState, args: Args) -> Result<KclVal
 ///     }, %)
 ///     |> line(end = [0, 7])
 ///
-/// pipeHole = startSketchOn('XY')
+/// pipeHole = startSketchOn(XY)
 ///     |> circle(
 ///         center = [0, 0],
 ///         radius = 1.5,
 ///     )
 ///
-/// sweepSketch = startSketchOn('XY')
+/// sweepSketch = startSketchOn(XY)
 ///     |> circle(
 ///         center = [0, 0],
 ///         radius = 2,

rust/kcl-lib/src/std/args.rs

@@ -154,6 +154,22 @@ impl Args {
         })
     }
 
+    pub(crate) fn get_kw_arg_opt_typed<T>(
+        &self,
+        label: &str,
+        ty: &RuntimeType,
+        exec_state: &mut ExecState,
+    ) -> Result<Option<T>, KclError>
+    where
+        T: for<'a> FromKclValue<'a>,
+    {
+        if self.kw_args.labeled.get(label).is_none() {
+            return Ok(None);
+        };
+
+        self.get_kw_arg_typed(label, ty, exec_state).map(Some)
+    }
+
     /// Get a keyword argument. If not set, returns Err.
     pub(crate) fn get_kw_arg<'a, T>(&'a self, label: &str) -> Result<T, KclError>
     where
@@ -675,37 +691,6 @@ impl Args {
         FromArgs::from_args(self, 0)
     }
 
-    pub(crate) fn get_data_and_sketches<'a, T>(
-        &'a self,
-        exec_state: &mut ExecState,
-    ) -> Result<(T, Vec<Sketch>), KclError>
-    where
-        T: serde::de::DeserializeOwned + FromArgs<'a>,
-    {
-        let data: T = FromArgs::from_args(self, 0)?;
-        let Some(arg1) = self.args.get(1) else {
-            return Err(KclError::Semantic(KclErrorDetails {
-                message: "Expected one or more sketches for second argument".to_owned(),
-                source_ranges: vec![self.source_range],
-            }));
-        };
-        let sarg = arg1
-            .value
-            .coerce(&RuntimeType::sketches(), exec_state)
-            .ok_or(KclError::Type(KclErrorDetails {
-                message: format!(
-                    "Expected one or more sketches for second argument, found {}",
-                    arg1.value.human_friendly_type()
-                ),
-                source_ranges: vec![self.source_range],
-            }))?;
-        let sketches = match sarg {
-            KclValue::HomArray { value, .. } => value.iter().map(|v| v.as_sketch().unwrap().clone()).collect(),
-            _ => unreachable!(),
-        };
-        Ok((data, sketches))
-    }
-
     pub(crate) fn get_data_and_sketch_and_tag<'a, T>(
         &'a self,
         exec_state: &mut ExecState,
@@ -1583,50 +1568,6 @@ impl<'a> FromKclValue<'a> for super::sketch::SketchData {
     }
 }
 
-impl<'a> FromKclValue<'a> for super::axis_or_reference::AxisAndOrigin2d {
-    fn from_kcl_val(arg: &'a KclValue) -> Option<Self> {
-        // Case 1: predefined planes.
-        if let Some(s) = arg.as_str() {
-            return match s {
-                "X" | "x" => Some(Self::X),
-                "Y" | "y" => Some(Self::Y),
-                "-X" | "-x" => Some(Self::NegX),
-                "-Y" | "-y" => Some(Self::NegY),
-                _ => None,
-            };
-        }
-        // Case 2: custom planes.
-        let obj = arg.as_object()?;
-        let_field_of!(obj, custom, &KclObjectFields);
-        let_field_of!(custom, origin);
-        let_field_of!(custom, axis);
-        Some(Self::Custom { axis, origin })
-    }
-}
-
-impl<'a> FromKclValue<'a> for super::axis_or_reference::AxisAndOrigin3d {
-    fn from_kcl_val(arg: &'a KclValue) -> Option<Self> {
-        // Case 1: predefined planes.
-        if let Some(s) = arg.as_str() {
-            return match s {
-                "X" | "x" => Some(Self::X),
-                "Y" | "y" => Some(Self::Y),
-                "Z" | "z" => Some(Self::Z),
-                "-X" | "-x" => Some(Self::NegX),
-                "-Y" | "-y" => Some(Self::NegY),
-                "-Z" | "-z" => Some(Self::NegZ),
-                _ => None,
-            };
-        }
-        // Case 2: custom planes.
-        let obj = arg.as_object()?;
-        let_field_of!(obj, custom, &KclObjectFields);
-        let_field_of!(custom, origin);
-        let_field_of!(custom, axis);
-        Some(Self::Custom { axis, origin })
-    }
-}
-
 impl<'a> FromKclValue<'a> for super::fillet::EdgeReference {
     fn from_kcl_val(arg: &'a KclValue) -> Option<Self> {
         let id = arg.as_uuid().map(Self::Uuid);
@@ -1637,25 +1578,27 @@ impl<'a> FromKclValue<'a> for super::fillet::EdgeReference {
 
 impl<'a> FromKclValue<'a> for super::axis_or_reference::Axis2dOrEdgeReference {
     fn from_kcl_val(arg: &'a KclValue) -> Option<Self> {
-        let case1 = super::axis_or_reference::AxisAndOrigin2d::from_kcl_val;
+        let case1 = |arg: &KclValue| {
+            let obj = arg.as_object()?;
+            let_field_of!(obj, direction);
+            let_field_of!(obj, origin);
+            Some(Self::Axis { direction, origin })
+        };
         let case2 = super::fillet::EdgeReference::from_kcl_val;
-        case1(arg).map(Self::Axis).or_else(|| case2(arg).map(Self::Edge))
+        case1(arg).or_else(|| case2(arg).map(Self::Edge))
     }
 }
 
 impl<'a> FromKclValue<'a> for super::axis_or_reference::Axis3dOrEdgeReference {
     fn from_kcl_val(arg: &'a KclValue) -> Option<Self> {
-        let case1 = super::axis_or_reference::AxisAndOrigin3d::from_kcl_val;
+        let case1 = |arg: &KclValue| {
+            let obj = arg.as_object()?;
+            let_field_of!(obj, direction);
+            let_field_of!(obj, origin);
+            Some(Self::Axis { direction, origin })
+        };
         let case2 = super::fillet::EdgeReference::from_kcl_val;
-        case1(arg).map(Self::Axis).or_else(|| case2(arg).map(Self::Edge))
-    }
-}
-
-impl<'a> FromKclValue<'a> for super::mirror::Mirror2dData {
-    fn from_kcl_val(arg: &'a KclValue) -> Option<Self> {
-        let obj = arg.as_object()?;
-        let_field_of!(obj, axis);
-        Some(Self { axis })
+        case1(arg).or_else(|| case2(arg).map(Self::Edge))
     }
 }
 

rust/kcl-lib/src/std/axis_or_reference.rs

@@ -1,233 +1,21 @@
 //! Types for referencing an axis or edge.
 
-use anyhow::Result;
-use kcmc::length_unit::LengthUnit;
-use kittycad_modeling_cmds::{self as kcmc};
-use schemars::JsonSchema;
-use serde::{Deserialize, Serialize};
-
-use crate::{errors::KclError, std::fillet::EdgeReference};
+use crate::std::fillet::EdgeReference;
 
 /// A 2D axis or tagged edge.
-#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
-#[ts(export)]
-#[serde(untagged)]
+#[derive(Debug, Clone, PartialEq)]
 pub enum Axis2dOrEdgeReference {
     /// 2D axis and origin.
-    Axis(AxisAndOrigin2d),
+    Axis { direction: [f64; 2], origin: [f64; 2] },
     /// Tagged edge.
     Edge(EdgeReference),
 }
 
-/// A 2D axis and origin.
-#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
-#[ts(export)]
-#[serde(rename_all = "camelCase")]
-pub enum AxisAndOrigin2d {
-    /// X-axis.
-    #[serde(rename = "X", alias = "x")]
-    X,
-    /// Y-axis.
-    #[serde(rename = "Y", alias = "y")]
-    Y,
-    /// Flip the X-axis.
-    #[serde(rename = "-X", alias = "-x")]
-    NegX,
-    /// Flip the Y-axis.
-    #[serde(rename = "-Y", alias = "-y")]
-    NegY,
-    Custom {
-        /// The axis.
-        axis: [f64; 2],
-        /// The origin.
-        origin: [f64; 2],
-    },
-}
-
-impl AxisAndOrigin2d {
-    /// Get the axis and origin.
-    pub fn axis_and_origin(&self) -> Result<(kcmc::shared::Point3d<f64>, kcmc::shared::Point3d<LengthUnit>), KclError> {
-        let (axis, origin) = match self {
-            AxisAndOrigin2d::X => ([1.0, 0.0, 0.0], [0.0, 0.0, 0.0]),
-            AxisAndOrigin2d::Y => ([0.0, 1.0, 0.0], [0.0, 0.0, 0.0]),
-            AxisAndOrigin2d::NegX => ([-1.0, 0.0, 0.0], [0.0, 0.0, 0.0]),
-            AxisAndOrigin2d::NegY => ([0.0, -1.0, 0.0], [0.0, 0.0, 0.0]),
-            AxisAndOrigin2d::Custom { axis, origin } => ([axis[0], axis[1], 0.0], [origin[0], origin[1], 0.0]),
-        };
-
-        Ok((
-            kcmc::shared::Point3d {
-                x: axis[0],
-                y: axis[1],
-                z: axis[2],
-            },
-            kcmc::shared::Point3d {
-                x: LengthUnit(origin[0]),
-                y: LengthUnit(origin[1]),
-                z: LengthUnit(origin[2]),
-            },
-        ))
-    }
-}
-
 /// A 3D axis or tagged edge.
-#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
-#[ts(export)]
-#[serde(untagged)]
+#[derive(Debug, Clone, PartialEq)]
 pub enum Axis3dOrEdgeReference {
     /// 3D axis and origin.
-    Axis(AxisAndOrigin3d),
+    Axis { direction: [f64; 3], origin: [f64; 3] },
     /// Tagged edge.
     Edge(EdgeReference),
 }
-
-/// A 3D axis and origin.
-#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
-#[ts(export)]
-#[serde(rename_all = "camelCase")]
-pub enum AxisAndOrigin3d {
-    /// X-axis.
-    #[serde(rename = "X", alias = "x")]
-    X,
-    /// Y-axis.
-    #[serde(rename = "Y", alias = "y")]
-    Y,
-    /// Z-axis.
-    #[serde(rename = "Z", alias = "z")]
-    Z,
-    /// Flip the X-axis.
-    #[serde(rename = "-X", alias = "-x")]
-    NegX,
-    /// Flip the Y-axis.
-    #[serde(rename = "-Y", alias = "-y")]
-    NegY,
-    /// Flip the Z-axis.
-    #[serde(rename = "-Z", alias = "-z")]
-    NegZ,
-    Custom {
-        /// The axis.
-        axis: [f64; 3],
-        /// The origin.
-        origin: [f64; 3],
-    },
-}
-
-impl AxisAndOrigin3d {
-    /// Get the axis and origin.
-    pub fn axis_and_origin(&self) -> Result<(kcmc::shared::Point3d<f64>, kcmc::shared::Point3d<LengthUnit>), KclError> {
-        let (axis, origin) = match self {
-            AxisAndOrigin3d::X => ([1.0, 0.0, 0.0], [0.0, 0.0, 0.0]),
-            AxisAndOrigin3d::Y => ([0.0, 1.0, 0.0], [0.0, 0.0, 0.0]),
-            AxisAndOrigin3d::Z => ([0.0, 0.0, 1.0], [0.0, 0.0, 0.0]),
-            AxisAndOrigin3d::NegX => ([-1.0, 0.0, 0.0], [0.0, 0.0, 0.0]),
-            AxisAndOrigin3d::NegY => ([0.0, -1.0, 0.0], [0.0, 0.0, 0.0]),
-            AxisAndOrigin3d::NegZ => ([0.0, 0.0, -1.0], [0.0, 0.0, 0.0]),
-            AxisAndOrigin3d::Custom { axis, origin } => {
-                ([axis[0], axis[1], axis[2]], [origin[0], origin[1], origin[2]])
-            }
-        };
-
-        Ok((
-            kcmc::shared::Point3d {
-                x: axis[0],
-                y: axis[1],
-                z: axis[2],
-            },
-            kcmc::shared::Point3d {
-                x: LengthUnit(origin[0]),
-                y: LengthUnit(origin[1]),
-                z: LengthUnit(origin[2]),
-            },
-        ))
-    }
-}
-
-#[cfg(test)]
-mod tests {
-
-    use pretty_assertions::assert_eq;
-
-    use crate::std::axis_or_reference::{
-        Axis2dOrEdgeReference, Axis3dOrEdgeReference, AxisAndOrigin2d, AxisAndOrigin3d,
-    };
-
-    #[test]
-    fn test_deserialize_revolve_axis_2d() {
-        let data = Axis2dOrEdgeReference::Axis(AxisAndOrigin2d::X);
-        let mut str_json = serde_json::to_string(&data).unwrap();
-        assert_eq!(str_json, "\"X\"");
-
-        str_json = "\"Y\"".to_string();
-        let data: Axis2dOrEdgeReference = serde_json::from_str(&str_json).unwrap();
-        assert_eq!(data, Axis2dOrEdgeReference::Axis(AxisAndOrigin2d::Y));
-
-        str_json = "\"-Y\"".to_string();
-        let data: Axis2dOrEdgeReference = serde_json::from_str(&str_json).unwrap();
-        assert_eq!(data, Axis2dOrEdgeReference::Axis(AxisAndOrigin2d::NegY));
-
-        str_json = "\"-x\"".to_string();
-        let data: Axis2dOrEdgeReference = serde_json::from_str(&str_json).unwrap();
-        assert_eq!(data, Axis2dOrEdgeReference::Axis(AxisAndOrigin2d::NegX));
-
-        let data = Axis2dOrEdgeReference::Axis(AxisAndOrigin2d::Custom {
-            axis: [0.0, -1.0],
-            origin: [1.0, 0.0],
-        });
-        str_json = serde_json::to_string(&data).unwrap();
-        assert_eq!(str_json, r#"{"custom":{"axis":[0.0,-1.0],"origin":[1.0,0.0]}}"#);
-
-        str_json = r#"{"custom": {"axis": [0,-1], "origin": [1,2.0]}}"#.to_string();
-        let data: Axis2dOrEdgeReference = serde_json::from_str(&str_json).unwrap();
-        assert_eq!(
-            data,
-            Axis2dOrEdgeReference::Axis(AxisAndOrigin2d::Custom {
-                axis: [0.0, -1.0],
-                origin: [1.0, 2.0]
-            })
-        );
-    }
-
-    #[test]
-    fn test_deserialize_revolve_axis_3d() {
-        let data = Axis3dOrEdgeReference::Axis(AxisAndOrigin3d::X);
-        let mut str_json = serde_json::to_string(&data).unwrap();
-        assert_eq!(str_json, "\"X\"");
-
-        str_json = "\"Y\"".to_string();
-        let data: Axis3dOrEdgeReference = serde_json::from_str(&str_json).unwrap();
-        assert_eq!(data, Axis3dOrEdgeReference::Axis(AxisAndOrigin3d::Y));
-
-        str_json = "\"Z\"".to_string();
-        let data: Axis3dOrEdgeReference = serde_json::from_str(&str_json).unwrap();
-        assert_eq!(data, Axis3dOrEdgeReference::Axis(AxisAndOrigin3d::Z));
-
-        str_json = "\"-Y\"".to_string();
-        let data: Axis3dOrEdgeReference = serde_json::from_str(&str_json).unwrap();
-        assert_eq!(data, Axis3dOrEdgeReference::Axis(AxisAndOrigin3d::NegY));
-
-        str_json = "\"-x\"".to_string();
-        let data: Axis3dOrEdgeReference = serde_json::from_str(&str_json).unwrap();
-        assert_eq!(data, Axis3dOrEdgeReference::Axis(AxisAndOrigin3d::NegX));
-
-        str_json = "\"-z\"".to_string();
-        let data: Axis3dOrEdgeReference = serde_json::from_str(&str_json).unwrap();
-        assert_eq!(data, Axis3dOrEdgeReference::Axis(AxisAndOrigin3d::NegZ));
-
-        let data = Axis3dOrEdgeReference::Axis(AxisAndOrigin3d::Custom {
-            axis: [0.0, -1.0, 0.0],
-            origin: [1.0, 0.0, 0.0],
-        });
-        str_json = serde_json::to_string(&data).unwrap();
-        assert_eq!(str_json, r#"{"custom":{"axis":[0.0,-1.0,0.0],"origin":[1.0,0.0,0.0]}}"#);
-
-        str_json = r#"{"custom": {"axis": [0,-1,0], "origin": [1,2.0,0]}}"#.to_string();
-        let data: Axis3dOrEdgeReference = serde_json::from_str(&str_json).unwrap();
-        assert_eq!(
-            data,
-            Axis3dOrEdgeReference::Axis(AxisAndOrigin3d::Custom {
-                axis: [0.0, -1.0, 0.0],
-                origin: [1.0, 2.0, 0.0]
-            })
-        );
-    }
-}

rust/kcl-lib/src/std/helix.rs

@@ -1,13 +1,15 @@
 //! Standard library helices.
 
 use anyhow::Result;
-use kcl_derive_docs::stdlib;
 use kcmc::{each_cmd as mcmd, length_unit::LengthUnit, shared::Angle, ModelingCmd};
-use kittycad_modeling_cmds as kcmc;
+use kittycad_modeling_cmds::{self as kcmc, shared::Point3d};
 
 use crate::{
     errors::KclError,
-    execution::{ExecState, Helix as HelixValue, KclValue, Solid},
+    execution::{
+        types::{PrimitiveType, RuntimeType},
+        ExecState, Helix as HelixValue, KclValue, Solid,
+    },
     std::{axis_or_reference::Axis3dOrEdgeReference, Args},
 };
 
@@ -17,7 +19,14 @@ pub async fn helix(exec_state: &mut ExecState, args: Args) -> Result<KclValue, K
     let revolutions = args.get_kw_arg("revolutions")?;
     let ccw = args.get_kw_arg_opt("ccw")?;
     let radius = args.get_kw_arg_opt("radius")?;
-    let axis = args.get_kw_arg_opt("axis")?;
+    let axis: Option<Axis3dOrEdgeReference> = args.get_kw_arg_opt_typed(
+        "axis",
+        &RuntimeType::Union(vec![
+            RuntimeType::Primitive(PrimitiveType::Edge),
+            RuntimeType::Primitive(PrimitiveType::Axis3d),
+        ]),
+        exec_state,
+    )?;
     let length = args.get_kw_arg_opt("length")?;
     let cylinder = args.get_kw_arg_opt("cylinder")?;
 
@@ -84,100 +93,6 @@ pub async fn helix(exec_state: &mut ExecState, args: Args) -> Result<KclValue, K
     Ok(KclValue::Helix { value })
 }
 
-/// Create a helix.
-///
-/// ```no_run
-/// // Create a helix around the Z axis.
-/// helixPath = helix(
-///     angleStart = 0,
-///     ccw = true,
-///     revolutions = 5,
-///     length = 10,
-///     radius = 5,
-///     axis = 'Z',
-///  )
-///
-///
-/// // Create a spring by sweeping around the helix path.
-/// springSketch = startSketchOn('YZ')
-///     |> circle( center = [0, 0], radius = 0.5)
-///     |> sweep(path = helixPath)
-/// ```
-///
-/// ```no_run
-/// // Create a helix around an edge.
-/// helper001 = startSketchOn('XZ')
-///  |> startProfileAt([0, 0], %)
-///  |> line(end = [0, 10], tag = $edge001)
-///
-/// helixPath = helix(
-///     angleStart = 0,
-///     ccw = true,
-///     revolutions = 5,
-///     length = 10,
-///     radius = 5,
-///     axis = edge001,
-///  )
-///
-/// // Create a spring by sweeping around the helix path.
-/// springSketch = startSketchOn('XY')
-///     |> circle( center = [0, 0], radius = 0.5 )
-///     |> sweep(path = helixPath)
-/// ```
-///
-/// ```no_run
-/// // Create a helix around a custom axis.
-/// helixPath = helix(
-///     angleStart = 0,
-///     ccw = true,
-///     revolutions = 5,
-///     length = 10,
-///     radius = 5,
-///     axis = {
-///         custom = {
-///             axis = [0, 0, 1.0],
-///             origin = [0, 0.25, 0]
-///             }
-///         }
-///  )
-///
-/// // Create a spring by sweeping around the helix path.
-/// springSketch = startSketchOn('XY')
-///     |> circle( center = [0, 0], radius = 1 )
-///     |> sweep(path = helixPath)
-/// ```
-///
-///
-///
-/// ```no_run
-/// // Create a helix on a cylinder.
-///
-/// part001 = startSketchOn('XY')
-///   |> circle( center= [5, 5], radius= 10 )
-///   |> extrude(length = 10)
-///
-/// helix(
-///     angleStart = 0,
-///     ccw = true,
-///     revolutions = 16,
-///     cylinder = part001,
-///  )
-/// ```
-#[stdlib {
-    name = "helix",
-    keywords = true,
-    unlabeled_first = false,
-    args = {
-        revolutions = { docs = "Number of revolutions."},
-        angle_start = { docs = "Start angle (in degrees)."},
-        ccw = { docs = "Is the helix rotation counter clockwise? The default is `false`.", include_in_snippet = false},
-        radius = { docs = "Radius of the helix.", include_in_snippet = true},
-        axis = { docs = "Axis to use for the helix.", include_in_snippet = true},
-        length = { docs = "Length of the helix. This is not necessary if the helix is created around an edge. If not given the length of the edge is used.", include_in_snippet = true},
-        cylinder = { docs = "Cylinder to create the helix on.", include_in_snippet = false},
-    },
-    feature_tree_operation = true,
-}]
 #[allow(clippy::too_many_arguments)]
 async fn inner_helix(
     revolutions: f64,
@@ -221,9 +136,7 @@ async fn inner_helix(
         .await?;
     } else if let (Some(axis), Some(radius)) = (axis, radius) {
         match axis {
-            Axis3dOrEdgeReference::Axis(axis) => {
-                let (axis, origin) = axis.axis_and_origin()?;
-
+            Axis3dOrEdgeReference::Axis { direction, origin } => {
                 // Make sure they gave us a length.
                 let Some(length) = length else {
                     return Err(KclError::Semantic(crate::errors::KclErrorDetails {
@@ -240,8 +153,16 @@ async fn inner_helix(
                         length: LengthUnit(length),
                         revolutions,
                         start_angle: Angle::from_degrees(angle_start),
-                        axis,
-                        center: origin,
+                        axis: Point3d {
+                            x: direction[0],
+                            y: direction[1],
+                            z: direction[2],
+                        },
+                        center: Point3d {
+                            x: LengthUnit(origin[0]),
+                            y: LengthUnit(origin[1]),
+                            z: LengthUnit(origin[2]),
+                        },
                     }),
                 )
                 .await?;

rust/kcl-lib/src/std/mirror.rs

@@ -1,109 +1,39 @@
 //! Standard library mirror.
 
 use anyhow::Result;
-use kcl_derive_docs::stdlib;
 use kcmc::{each_cmd as mcmd, ModelingCmd};
-use kittycad_modeling_cmds::{self as kcmc};
-use schemars::JsonSchema;
-use serde::{Deserialize, Serialize};
+use kittycad_modeling_cmds::{self as kcmc, length_unit::LengthUnit, shared::Point3d};
 
 use crate::{
     errors::KclError,
-    execution::{ExecState, KclValue, Sketch},
+    execution::{
+        types::{PrimitiveType, RuntimeType},
+        ExecState, KclValue, Sketch,
+    },
     std::{axis_or_reference::Axis2dOrEdgeReference, Args},
 };
 
-/// Data for a mirror.
-#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
-#[ts(export)]
-#[serde(rename_all = "camelCase")]
-pub struct Mirror2dData {
-    /// Axis to use as mirror.
-    pub axis: Axis2dOrEdgeReference,
-}
-
 /// Mirror a sketch.
 ///
 /// Only works on unclosed sketches for now.
 pub async fn mirror_2d(exec_state: &mut ExecState, args: Args) -> Result<KclValue, KclError> {
-    let (data, sketch_set): (Mirror2dData, Vec<Sketch>) = args.get_data_and_sketches(exec_state)?;
+    let sketches = args.get_unlabeled_kw_arg_typed("sketches", &RuntimeType::sketches(), exec_state)?;
+    let axis = args.get_kw_arg_typed(
+        "axis",
+        &RuntimeType::Union(vec![
+            RuntimeType::Primitive(PrimitiveType::Edge),
+            RuntimeType::Primitive(PrimitiveType::Axis2d),
+        ]),
+        exec_state,
+    )?;
 
-    let sketches = inner_mirror_2d(data, sketch_set, exec_state, args).await?;
+    let sketches = inner_mirror_2d(sketches, axis, exec_state, args).await?;
     Ok(sketches.into())
 }
 
-/// Mirror a sketch.
-///
-/// Only works on unclosed sketches for now.
-///
-/// Mirror occurs around a local sketch axis rather than a global axis.
-///
-/// ```no_run
-/// // Mirror an un-closed sketch across the Y axis.
-/// sketch001 = startSketchOn('XZ')
-///     |> startProfileAt([0, 10], %)
-///     |> line(end = [15, 0])
-///     |> line(end = [-7, -3])
-///     |> line(end = [9, -1])
-///     |> line(end = [-8, -5])
-///     |> line(end = [9, -3])
-///     |> line(end = [-8, -3])
-///     |> line(end = [9, -1])
-///     |> line(end = [-19, -0])
-///     |> mirror2d({axis = 'Y'}, %)
-///
-/// example = extrude(sketch001, length = 10)
-/// ```
-///
-/// ```no_run
-/// // Mirror a un-closed sketch across the Y axis.
-/// sketch001 = startSketchOn('XZ')
-///     |> startProfileAt([0, 8.5], %)
-///     |> line(end = [20, -8.5])
-///     |> line(end = [-20, -8.5])
-///     |> mirror2d({axis = 'Y'}, %)
-///
-/// example = extrude(sketch001, length = 10)
-/// ```
-///
-/// ```no_run
-/// // Mirror a un-closed sketch across an edge.
-/// helper001 = startSketchOn('XZ')
-///  |> startProfileAt([0, 0], %)
-///  |> line(end = [0, 10], tag = $edge001)
-///
-/// sketch001 = startSketchOn('XZ')
-///     |> startProfileAt([0, 8.5], %)
-///     |> line(end = [20, -8.5])
-///     |> line(end = [-20, -8.5])
-///     |> mirror2d({axis = edge001}, %)
-///
-/// // example = extrude(sketch001, length = 10)
-/// ```
-///
-/// ```no_run
-/// // Mirror an un-closed sketch across a custom axis.
-/// sketch001 = startSketchOn('XZ')
-///     |> startProfileAt([0, 8.5], %)
-///     |> line(end = [20, -8.5])
-///     |> line(end = [-20, -8.5])
-///     |> mirror2d({
-///   axis = {
-///     custom = {
-///       axis = [0.0, 1.0],
-///       origin = [0.0, 0.0]
-///     }
-///   }
-/// }, %)
-///
-/// example = extrude(sketch001, length = 10)
-/// ```
-#[stdlib {
-    name = "mirror2d",
-}]
 async fn inner_mirror_2d(
-    data: Mirror2dData,
     sketches: Vec<Sketch>,
+    axis: Axis2dOrEdgeReference,
     exec_state: &mut ExecState,
     args: Args,
 ) -> Result<Vec<Sketch>, KclError> {
@@ -113,16 +43,22 @@ async fn inner_mirror_2d(
         return Ok(starting_sketches);
     }
 
-    match data.axis {
-        Axis2dOrEdgeReference::Axis(axis) => {
-            let (axis, origin) = axis.axis_and_origin()?;
-
+    match axis {
+        Axis2dOrEdgeReference::Axis { direction, origin } => {
             args.batch_modeling_cmd(
                 exec_state.next_uuid(),
                 ModelingCmd::from(mcmd::EntityMirror {
                     ids: starting_sketches.iter().map(|sketch| sketch.id).collect(),
-                    axis,
-                    point: origin,
+                    axis: Point3d {
+                        x: direction[0],
+                        y: direction[1],
+                        z: 0.0,
+                    },
+                    point: Point3d {
+                        x: LengthUnit(origin[0]),
+                        y: LengthUnit(origin[1]),
+                        z: LengthUnit(0.0),
+                    },
                 }),
             )
             .await?;

rust/kcl-lib/src/std/mod.rs

@@ -26,7 +26,6 @@ pub mod shell;
 pub mod sketch;
 pub mod sweep;
 pub mod transform;
-pub mod types;
 pub mod units;
 pub mod utils;
 
@@ -96,7 +95,6 @@ lazy_static! {
         Box::new(crate::std::sketch::TangentialArcToRelative),
         Box::new(crate::std::sketch::BezierCurve),
         Box::new(crate::std::sketch::Hole),
-        Box::new(crate::std::mirror::Mirror2D),
         Box::new(crate::std::patterns::PatternLinear2D),
         Box::new(crate::std::patterns::PatternLinear3D),
         Box::new(crate::std::patterns::PatternCircular2D),
@@ -113,10 +111,8 @@ lazy_static! {
         Box::new(crate::std::edge::GetNextAdjacentEdge),
         Box::new(crate::std::edge::GetPreviousAdjacentEdge),
         Box::new(crate::std::edge::GetCommonEdge),
-        Box::new(crate::std::helix::Helix),
         Box::new(crate::std::shell::Shell),
         Box::new(crate::std::shell::Hollow),
-        Box::new(crate::std::revolve::Revolve),
         Box::new(crate::std::sweep::Sweep),
         Box::new(crate::std::loft::Loft),
         Box::new(crate::std::planes::OffsetPlane),
@@ -177,6 +173,7 @@ pub fn get_stdlib_fn(name: &str) -> Option<Box<dyn StdLibFn>> {
 pub struct StdFnProps {
     pub name: String,
     pub deprecated: bool,
+    pub include_in_feature_tree: bool,
 }
 
 impl StdFnProps {
@@ -184,8 +181,14 @@ impl StdFnProps {
         Self {
             name: name.to_owned(),
             deprecated: false,
+            include_in_feature_tree: false,
         }
     }
+
+    fn include_in_feature_tree(mut self) -> Self {
+        self.include_in_feature_tree = true;
+        self
+    }
 }
 
 pub(crate) fn std_fn(path: &str, fn_name: &str) -> (crate::std::StdFn, StdFnProps) {
@@ -206,6 +209,18 @@ pub(crate) fn std_fn(path: &str, fn_name: &str) -> (crate::std::StdFn, StdFnProp
             |e, a| Box::pin(crate::std::shapes::circle(e, a)),
             StdFnProps::default("std::sketch::circle"),
         ),
+        ("prelude", "helix") => (
+            |e, a| Box::pin(crate::std::helix::helix(e, a)),
+            StdFnProps::default("std::helix").include_in_feature_tree(),
+        ),
+        ("sketch", "mirror2d") => (
+            |e, a| Box::pin(crate::std::mirror::mirror_2d(e, a)),
+            StdFnProps::default("std::sketch::mirror2d"),
+        ),
+        ("prelude", "revolve") => (
+            |e, a| Box::pin(crate::std::revolve::revolve(e, a)),
+            StdFnProps::default("std::revolve").include_in_feature_tree(),
+        ),
         _ => unreachable!(),
     }
 }
@@ -217,6 +232,9 @@ pub(crate) fn std_ty(path: &str, fn_name: &str) -> (PrimitiveType, StdFnProps) {
         ("prelude", "Plane") => (PrimitiveType::Plane, StdFnProps::default("std::Plane")),
         ("prelude", "Face") => (PrimitiveType::Face, StdFnProps::default("std::Face")),
         ("prelude", "Helix") => (PrimitiveType::Helix, StdFnProps::default("std::Helix")),
+        ("prelude", "Edge") => (PrimitiveType::Edge, StdFnProps::default("std::Edge")),
+        ("prelude", "Axis2d") => (PrimitiveType::Axis2d, StdFnProps::default("std::Axis2d")),
+        ("prelude", "Axis3d") => (PrimitiveType::Axis3d, StdFnProps::default("std::Axis3d")),
         _ => unreachable!(),
     }
 }

rust/kcl-lib/src/std/revolve.rs

@@ -1,13 +1,15 @@
 //! Standard library revolution surfaces.
 
 use anyhow::Result;
-use kcl_derive_docs::stdlib;
 use kcmc::{each_cmd as mcmd, length_unit::LengthUnit, shared::Angle, ModelingCmd};
-use kittycad_modeling_cmds::{self as kcmc};
+use kittycad_modeling_cmds::{self as kcmc, shared::Point3d};
 
 use crate::{
     errors::{KclError, KclErrorDetails},
-    execution::{types::RuntimeType, ExecState, KclValue, Sketch, Solid},
+    execution::{
+        types::{PrimitiveType, RuntimeType},
+        ExecState, KclValue, Sketch, Solid,
+    },
     parsing::ast::types::TagNode,
     std::{axis_or_reference::Axis2dOrEdgeReference, extrude::do_post_extrude, fillet::default_tolerance, Args},
 };
@@ -15,7 +17,14 @@ use crate::{
 /// Revolve a sketch or set of sketches around an axis.
 pub async fn revolve(exec_state: &mut ExecState, args: Args) -> Result<KclValue, KclError> {
     let sketches = args.get_unlabeled_kw_arg_typed("sketches", &RuntimeType::sketches(), exec_state)?;
-    let axis: Axis2dOrEdgeReference = args.get_kw_arg("axis")?;
+    let axis = args.get_kw_arg_typed(
+        "axis",
+        &RuntimeType::Union(vec![
+            RuntimeType::Primitive(PrimitiveType::Edge),
+            RuntimeType::Primitive(PrimitiveType::Axis2d),
+        ]),
+        exec_state,
+    )?;
     let angle = args.get_kw_arg_opt("angle")?;
     let tolerance = args.get_kw_arg_opt("tolerance")?;
     let tag_start = args.get_kw_arg_opt("tagStart")?;
@@ -25,215 +34,6 @@ pub async fn revolve(exec_state: &mut ExecState, args: Args) -> Result<KclValue,
     Ok(value.into())
 }
 
-/// Rotate a sketch around some provided axis, creating a solid from its extent.
-///
-/// This, like extrude, is able to create a 3-dimensional solid from a
-/// 2-dimensional sketch. However, unlike extrude, this creates a solid
-/// by using the extent of the sketch as its revolved around an axis rather
-/// than using the extent of the sketch linearly translated through a third
-/// dimension.
-///
-/// Revolve occurs around a local sketch axis rather than a global axis.
-///
-/// You can provide more than one sketch to revolve, and they will all be
-/// revolved around the same axis.
-///
-/// ```no_run
-/// part001 = startSketchOn('XY')
-///     |> startProfileAt([4, 12], %)
-///     |> line(end = [2, 0])
-///     |> line(end = [0, -6])
-///     |> line(end = [4, -6])
-///     |> line(end = [0, -6])
-///     |> line(end = [-3.75, -4.5])
-///     |> line(end = [0, -5.5])
-///     |> line(end = [-2, 0])
-///     |> close()
-///     |> revolve(axis = 'y') // default angle is 360
-/// ```
-///
-/// ```no_run
-/// // A donut shape.
-/// sketch001 = startSketchOn('XY')
-///     |> circle( center = [15, 0], radius = 5 )
-///     |> revolve(
-///         angle = 360,
-///         axis = 'y'
-///     )
-/// ```
-///
-/// ```no_run
-/// part001 = startSketchOn('XY')
-///     |> startProfileAt([4, 12], %)
-///     |> line(end = [2, 0])
-///     |> line(end = [0, -6])
-///     |> line(end = [4, -6])
-///     |> line(end = [0, -6])
-///     |> line(end = [-3.75, -4.5])
-///     |> line(end = [0, -5.5])
-///     |> line(end = [-2, 0])
-///     |> close()
-///     |> revolve(axis = 'y', angle = 180)
-/// ```
-///
-/// ```no_run
-/// part001 = startSketchOn('XY')
-///     |> startProfileAt([4, 12], %)
-///     |> line(end = [2, 0])
-///     |> line(end = [0, -6])
-///     |> line(end = [4, -6])
-///     |> line(end = [0, -6])
-///     |> line(end = [-3.75, -4.5])
-///     |> line(end = [0, -5.5])
-///     |> line(end = [-2, 0])
-///     |> close()
-///     |> revolve(axis = 'y', angle = 180)
-///
-/// part002 = startSketchOn(part001, 'end')
-///     |> startProfileAt([4.5, -5], %)
-///     |> line(end = [0, 5])
-///     |> line(end = [5, 0])
-///     |> line(end = [0, -5])
-///     |> close()
-///     |> extrude(length = 5)
-/// ```
-///
-/// ```no_run
-/// box = startSketchOn('XY')
-///     |> startProfileAt([0, 0], %)
-///     |> line(end = [0, 20])
-///     |> line(end = [20, 0])
-///     |> line(end = [0, -20])
-///     |> close()
-///     |> extrude(length = 20)
-///
-/// sketch001 = startSketchOn(box, "END")
-///     |> circle( center = [10,10], radius = 4 )
-///     |> revolve(
-///         angle = -90,
-///         axis = 'y'
-///     )
-/// ```
-///
-/// ```no_run
-/// box = startSketchOn('XY')
-///     |> startProfileAt([0, 0], %)
-///     |> line(end = [0, 20])
-///     |> line(end = [20, 0])
-///     |> line(end = [0, -20], tag = $revolveAxis)
-///     |> close()
-///     |> extrude(length = 20)
-///
-/// sketch001 = startSketchOn(box, "END")
-///     |> circle( center = [10,10], radius = 4 )
-///     |> revolve(
-///         angle = 90,
-///         axis = getOppositeEdge(revolveAxis)
-///     )
-/// ```
-///
-/// ```no_run
-/// box = startSketchOn('XY')
-///     |> startProfileAt([0, 0], %)
-///     |> line(end = [0, 20])
-///     |> line(end = [20, 0])
-///     |> line(end = [0, -20], tag = $revolveAxis)
-///     |> close()
-///     |> extrude(length = 20)
-///
-/// sketch001 = startSketchOn(box, "END")
-///     |> circle( center = [10,10], radius = 4 )
-///     |> revolve(
-///         angle = 90,
-///         axis = getOppositeEdge(revolveAxis),
-///         tolerance = 0.0001
-///     )
-/// ```
-///
-/// ```no_run
-/// sketch001 = startSketchOn('XY')
-///   |> startProfileAt([10, 0], %)
-///   |> line(end = [5, -5])
-///   |> line(end = [5, 5])
-///   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-///   |> close()
-///
-/// part001 = revolve(
-///    sketch001,
-///   axis = {
-///     custom: {
-///       axis = [0.0, 1.0],
-///       origin: [0.0, 0.0]
-///     }
-///   }
-/// )
-/// ```
-///
-/// ```no_run
-/// // Revolve two sketches around the same axis.
-///
-/// sketch001 = startSketchOn('XY')
-/// profile001 = startProfileAt([4, 8], sketch001)
-///     |> xLine(length = 3)
-///     |> yLine(length = -3)
-///     |> xLine(length = -3)
-///     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-///     |> close()
-///
-/// profile002 = startProfileAt([-5, 8], sketch001)
-///     |> xLine(length = 3)
-///     |> yLine(length = -3)
-///     |> xLine(length = -3)
-///     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-///     |> close()
-///
-/// revolve(
-///     [profile001, profile002],
-///     axis = "X",
-/// )
-/// ```
-///
-/// ```no_run
-/// // Revolve around a path that has not been extruded.
-///
-/// profile001 = startSketchOn('XY')
-///     |> startProfileAt([0, 0], %)
-///     |> line(end = [0, 20], tag = $revolveAxis)
-///     |> line(end = [20, 0])
-///     |> line(end = [0, -20])
-///     |> close(%)
-///
-/// sketch001 = startSketchOn('XY')
-///     |> circle(center = [-10, 10], radius = 4)
-///     |> revolve(angle = 90, axis = revolveAxis)
-/// ```
-///
-/// ```no_run
-/// // Revolve around a path that has not been extruded or closed.
-///
-/// profile001 = startSketchOn('XY')
-///     |> startProfileAt([0, 0], %)
-///     |> line(end = [0, 20], tag = $revolveAxis)
-///     |> line(end = [20, 0])
-///
-/// sketch001 = startSketchOn('XY')
-///     |> circle(center = [-10, 10], radius = 4)
-///     |> revolve(angle = 90, axis = revolveAxis)
-/// ```
-#[stdlib {
-    name = "revolve",
-    feature_tree_operation = true,
-    keywords = true,
-    unlabeled_first = true,
-    args = {
-        sketches = { docs = "The sketch or set of sketches that should be revolved" },
-        axis = { docs = "Axis of revolution." },
-        angle = { docs = "Angle to revolve (in degrees). Default is 360." },
-        tolerance = { docs = "Tolerance for the revolve operation." },
-        tag_start = { docs = "A named tag for the face at the start of the revolve, i.e. the original sketch" },
-        tag_end = { docs = "A named tag for the face at the end of the revolve" },
-    }
-}]
 #[allow(clippy::too_many_arguments)]
 async fn inner_revolve(
     sketches: Vec<Sketch>,
@@ -264,15 +64,22 @@ async fn inner_revolve(
         let id = exec_state.next_uuid();
 
         match &axis {
-            Axis2dOrEdgeReference::Axis(axis) => {
-                let (axis, origin) = axis.axis_and_origin()?;
+            Axis2dOrEdgeReference::Axis { direction, origin } => {
                 args.batch_modeling_cmd(
                     id,
                     ModelingCmd::from(mcmd::Revolve {
                         angle,
                         target: sketch.id.into(),
-                        axis,
-                        origin,
+                        axis: Point3d {
+                            x: direction[0],
+                            y: direction[1],
+                            z: 0.0,
+                        },
+                        origin: Point3d {
+                            x: LengthUnit(origin[0]),
+                            y: LengthUnit(origin[1]),
+                            z: LengthUnit(0.0),
+                        },
                         tolerance: LengthUnit(tolerance.unwrap_or(default_tolerance(&args.ctx.settings.units))),
                         axis_is_2d: true,
                     }),

rust/kcl-lib/src/std/sketch.rs

@@ -1021,7 +1021,7 @@ pub async fn start_sketch_on(exec_state: &mut ExecState, args: Args) -> Result<K
 ///   |> line(end = [-2, 0])
 ///   |> close()
 ///
-/// example = revolve(exampleSketch, axis = 'y', angle = 180)
+/// example = revolve(exampleSketch, axis = Y, angle = 180)
 ///
 /// exampleSketch002 = startSketchOn(example, 'end')
 ///   |> startProfileAt([4.5, -5], %)
@@ -1047,7 +1047,7 @@ pub async fn start_sketch_on(exec_state: &mut ExecState, args: Args) -> Result<K
 ///   |> line(end = [-2, 0])
 ///   |> close()
 ///
-/// example = revolve(exampleSketch, axis = 'y', angle = 180, tagEnd = $end01)
+/// example = revolve(exampleSketch, axis = Y, angle = 180, tagEnd = $end01)
 ///
 /// exampleSketch002 = startSketchOn(example, end01)
 ///   |> startProfileAt([4.5, -5], %)

rust/kcl-lib/src/std/sweep.rs

@@ -54,7 +54,7 @@ pub async fn sweep(exec_state: &mut ExecState, args: Args) -> Result<KclValue, K
 /// // Create a pipe using a sweep.
 ///
 /// // Create a path for the sweep.
-/// sweepPath = startSketchOn('XZ')
+/// sweepPath = startSketchOn(XZ)
 ///     |> startProfileAt([0.05, 0.05], %)
 ///     |> line(end = [0, 7])
 ///     |> tangentialArc({
@@ -69,13 +69,13 @@ pub async fn sweep(exec_state: &mut ExecState, args: Args) -> Result<KclValue, K
 ///     |> line(end = [0, 7])
 ///
 /// // Create a hole for the pipe.
-/// pipeHole = startSketchOn('XY')
+/// pipeHole = startSketchOn(XY)
 ///     |> circle(
 ///         center = [0, 0],
 ///         radius = 1.5,
 ///     )
 ///
-/// sweepSketch = startSketchOn('XY')
+/// sweepSketch = startSketchOn(XY)
 ///     |> circle(
 ///         center = [0, 0],
 ///         radius = 2,
@@ -94,12 +94,12 @@ pub async fn sweep(exec_state: &mut ExecState, args: Args) -> Result<KclValue, K
 ///     revolutions = 4,
 ///     length = 10,
 ///     radius = 5,
-///     axis = 'Z',
+///     axis = Z,
 ///  )
 ///
 ///
 /// // Create a spring by sweeping around the helix path.
-/// springSketch = startSketchOn('YZ')
+/// springSketch = startSketchOn(YZ)
 ///     |> circle( center = [0, 0], radius = 1)
 ///     |> sweep(path = helixPath)
 /// ```
@@ -107,7 +107,7 @@ pub async fn sweep(exec_state: &mut ExecState, args: Args) -> Result<KclValue, K
 /// ```
 /// // Sweep two sketches along the same path.
 ///
-/// sketch001 = startSketchOn('XY')
+/// sketch001 = startSketchOn(XY)
 /// rectangleSketch = startProfileAt([-200, 23.86], sketch001)
 ///     |> angledLine([0, 73.47], %, $rectangleSegmentA001)
 ///     |> angledLine([
@@ -123,7 +123,7 @@ pub async fn sweep(exec_state: &mut ExecState, args: Args) -> Result<KclValue, K
 ///
 /// circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 ///
-/// sketch002 = startSketchOn('YZ')
+/// sketch002 = startSketchOn(YZ)
 /// sweepPath = startProfileAt([0, 0], sketch002)
 ///     |> yLine(length = 231.81)
 ///     |> tangentialArc({
@@ -137,7 +137,7 @@ pub async fn sweep(exec_state: &mut ExecState, args: Args) -> Result<KclValue, K
 /// ```
 /// // Sectionally sweep one sketch along the path
 ///
-/// sketch001 = startSketchOn('XY')
+/// sketch001 = startSketchOn(XY)
 /// circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 ///
 /// sketch002 = startSketchOn('YZ')

rust/kcl-lib/src/std/types.rs

@@ -1 +0,0 @@
-

rust/kcl-lib/src/unparser.rs

@@ -1235,7 +1235,7 @@ insideRevolve = startSketchOn(XZ)
   |> line([0, -thickness], %)
   |> line([-overHangLength, 0], %)
   |> close()
-  |> revolve({ axis: 'y' }, %)
+  |> revolve({ axis = Y }, %)
 
 // Sketch and revolve one of the balls and duplicate it using a circular pattern. (This is currently a workaround, we have a bug with rotating on a sketch that touches the rotation axis)
 sphere = startSketchOn(XZ)
@@ -1250,7 +1250,7 @@ sphere = startSketchOn(XZ)
        radius = sphereDia / 2 - 0.05
      }, %)
   |> close()
-  |> revolve({ axis: 'x' }, %)
+  |> revolve({ axis = X }, %)
   |> patternCircular3d(
        axis = [0, 0, 1],
        center = [0, 0, 0],
@@ -1274,7 +1274,7 @@ outsideRevolve = startSketchOn(XZ)
   |> line([0, thickness], %)
   |> line([overHangLength - thickness, 0], %)
   |> close()
-  |> revolve({ axis: 'y' }, %)"#;
+  |> revolve({ axis = Y }, %)"#;
         let program = crate::parsing::top_level_parse(some_program_string).unwrap();
 
         let recasted = program.recast(&Default::default(), 0);
@@ -1301,7 +1301,7 @@ insideRevolve = startSketchOn(XZ)
   |> line([0, -thickness], %)
   |> line([-overHangLength, 0], %)
   |> close()
-  |> revolve({ axis = 'y' }, %)
+  |> revolve({ axis = Y }, %)
 
 // Sketch and revolve one of the balls and duplicate it using a circular pattern. (This is currently a workaround, we have a bug with rotating on a sketch that touches the rotation axis)
 sphere = startSketchOn(XZ)
@@ -1316,7 +1316,7 @@ sphere = startSketchOn(XZ)
        radius = sphereDia / 2 - 0.05
      }, %)
   |> close()
-  |> revolve({ axis = 'x' }, %)
+  |> revolve({ axis = X }, %)
   |> patternCircular3d(
        axis = [0, 0, 1],
        center = [0, 0, 0],
@@ -1340,7 +1340,7 @@ outsideRevolve = startSketchOn(XZ)
   |> line([0, thickness], %)
   |> line([overHangLength - thickness, 0], %)
   |> close()
-  |> revolve({ axis = 'y' }, %)
+  |> revolve({ axis = Y }, %)
 "#
         );
     }
@@ -1613,9 +1613,9 @@ fn bracketSketch = (w, d, t) => {
   s = startSketchOn({
          plane: {
   origin: { x = 0, y = length / 2 + thk, z = 0 },
-  x_axis: { x = 1, y = 0, z = 0 },
-  y_axis: { x = 0, y = 0, z = 1 },
-  z_axis: { x = 0, y = 1, z = 0 }
+  x_axis = { x = 1, y = 0, z = 0 },
+  y_axis = { x = 0, y = 0, z = 1 },
+  z_axis = { x = 0, y = 1, z = 0 }
 }
        })
     |> startProfileAt([-w / 2 - t, d + t], %)
@@ -1645,9 +1645,9 @@ bracket_body = bracketSketch(width, depth, thk)
 tabs_r = startSketchOn({
        plane: {
   origin: { x = 0, y = 0, z = depth + thk },
-  x_axis: { x = 1, y = 0, z = 0 },
-  y_axis: { x = 0, y = 1, z = 0 },
-  z_axis: { x = 0, y = 0, z = 1 }
+  x_axis = { x = 1, y = 0, z = 0 },
+  y_axis = { x = 0, y = 1, z = 0 },
+  z_axis = { x = 0, y = 0, z = 1 }
 }
      })
   |> startProfileAt([width / 2 + thk, length / 2 + thk], %)
@@ -2528,9 +2528,9 @@ fn f() {
 sketch002 = startSketchOn({
        plane: {
     origin: { x = 1, y = 2, z = 3 },
-    x_axis: { x = 4, y = 5, z = 6 },
-    y_axis: { x = 7, y = 8, z = 9 },
-    z_axis: { x = 10, y = 11, z = 12 }
+    x_axis = { x = 4, y = 5, z = 6 },
+    y_axis = { x = 7, y = 8, z = 9 },
+    z_axis = { x = 10, y = 11, z = 12 }
        }
   })
 "#;

rust/kcl-lib/std/prelude.kcl

@@ -5,6 +5,7 @@
 
 export import * from "std::math"
 export import * from "std::sketch"
+export import "std::turns"
 
 /// A number
 ///
@@ -233,6 +234,10 @@ export type Face
 @(impl = std_rust)
 export type Helix
 
+/// The edge of a solid.
+@(impl = std_rust)
+export type Edge
+
 /// A point in two dimensional space.
 ///
 /// `Point2d` is an alias for a two-element array of [number](/docs/kcl/types/number)s. To write a value
@@ -245,11 +250,6 @@ export type Point2d = [number; 2]
 /// with type `Point3d`, use an array, e.g., `[0, 0, 0]` or `[5.0, 3.14, 6.8]`.
 export type Point3d = [number; 3]
 
-export ZERO = 0
-export QUARTER_TURN = 90deg
-export HALF_TURN = 180deg
-export THREE_QUARTER_TURN = 270deg
-
 export XY = {
   origin = { x = 0, y = 0, z = 0 },
   xAxis = { x = 1, y = 0, z = 0 },
@@ -270,3 +270,330 @@ export YZ = {
   yAxis = { x = 0, y = 0, z = 1 },
   zAxis = { x = 1, y = 0, z = 0 },
 }: Plane
+
+/// An infinte line in 2d space.
+@(impl = std_rust)
+export type Axis2d
+
+/// An infinte line in 3d space.
+@(impl = std_rust)
+export type Axis3d
+
+export X = {
+  origin = [0, 0, 0],
+  direction = [1, 0, 0],
+}: Axis3d
+
+export Y = {
+  origin = [0, 0, 0],
+  direction = [0, 1, 0],
+}: Axis3d
+
+export Z = {
+  origin = [0, 0, 0],
+  direction = [0, 0, 1],
+}: Axis3d
+
+/// Create a helix.
+///
+/// ```
+/// // Create a helix around the Z axis.
+/// helixPath = helix(
+///     angleStart = 0,
+///     ccw = true,
+///     revolutions = 5,
+///     length = 10,
+///     radius = 5,
+///     axis = Z,
+///  )
+///
+/// // Create a spring by sweeping around the helix path.
+/// springSketch = startSketchOn(YZ)
+///     |> circle( center = [0, 0], radius = 0.5)
+///     |> sweep(path = helixPath)
+/// ```
+///
+/// ```
+/// // Create a helix around an edge.
+/// helper001 = startSketchOn(XZ)
+///  |> startProfileAt([0, 0], %)
+///  |> line(end = [0, 10], tag = $edge001)
+///
+/// helixPath = helix(
+///     angleStart = 0,
+///     ccw = true,
+///     revolutions = 5,
+///     length = 10,
+///     radius = 5,
+///     axis = edge001,
+///  )
+///
+/// // Create a spring by sweeping around the helix path.
+/// springSketch = startSketchOn(XY)
+///     |> circle( center = [0, 0], radius = 0.5 )
+///     |> sweep(path = helixPath)
+/// ```
+///
+/// ```
+/// // Create a helix around a custom axis.
+/// helixPath = helix(
+///     angleStart = 0,
+///     ccw = true,
+///     revolutions = 5,
+///     length = 10,
+///     radius = 5,
+///     axis = {
+///         direction = [0, 0, 1.0],
+///         origin = [0, 0.25, 0]
+///     }
+///  )
+///
+/// // Create a spring by sweeping around the helix path.
+/// springSketch = startSketchOn(XY)
+///     |> circle( center = [0, 0], radius = 1 )
+///     |> sweep(path = helixPath)
+/// ```
+///
+/// ```
+/// // Create a helix on a cylinder.
+///
+/// part001 = startSketchOn(XY)
+///   |> circle( center= [5, 5], radius= 10 )
+///   |> extrude(length = 10)
+///
+/// helix(
+///     angleStart = 0,
+///     ccw = true,
+///     revolutions = 16,
+///     cylinder = part001,
+///  )
+/// ```
+@(impl = std_rust)
+export fn helix(
+  /// Number of revolutions.
+  revolutions: number(_),
+  /// Start angle (in degrees).
+  angleStart: number(deg),
+  /// Is the helix rotation counter clockwise? The default is `false`.
+  ccw?: bool,
+  /// Radius of the helix.
+  @(include_in_snippet = true)
+  radius?: number(mm),
+  /// Axis to use for the helix.
+  @(include_in_snippet = true)
+  axis?: Axis3d | Edge,
+  /// Length of the helix. This is not necessary if the helix is created around an edge. If not given the length of the edge is used.
+  @(include_in_snippet = true)
+  length?: number(mm),
+  /// Cylinder to create the helix on.
+  cylinder?: Solid,
+): Helix {}
+
+/// Rotate a sketch around some provided axis, creating a solid from its extent.
+///
+/// This, like extrude, is able to create a 3-dimensional solid from a
+/// 2-dimensional sketch. However, unlike extrude, this creates a solid
+/// by using the extent of the sketch as its revolved around an axis rather
+/// than using the extent of the sketch linearly translated through a third
+/// dimension.
+///
+/// Revolve occurs around a local sketch axis rather than a global axis.
+///
+/// You can provide more than one sketch to revolve, and they will all be
+/// revolved around the same axis.
+///
+/// ```
+/// part001 = startSketchOn(XY)
+///     |> startProfileAt([4, 12], %)
+///     |> line(end = [2, 0])
+///     |> line(end = [0, -6])
+///     |> line(end = [4, -6])
+///     |> line(end = [0, -6])
+///     |> line(end = [-3.75, -4.5])
+///     |> line(end = [0, -5.5])
+///     |> line(end = [-2, 0])
+///     |> close()
+///     |> revolve(axis = Y) // default angle is 360
+/// ```
+///
+/// ```
+/// // A donut shape.
+/// sketch001 = startSketchOn(XY)
+///     |> circle( center = [15, 0], radius = 5 )
+///     |> revolve(
+///         angle = 360,
+///         axis = Y,
+///     )
+/// ```
+///
+/// ```
+/// part001 = startSketchOn(XY)
+///     |> startProfileAt([4, 12], %)
+///     |> line(end = [2, 0])
+///     |> line(end = [0, -6])
+///     |> line(end = [4, -6])
+///     |> line(end = [0, -6])
+///     |> line(end = [-3.75, -4.5])
+///     |> line(end = [0, -5.5])
+///     |> line(end = [-2, 0])
+///     |> close()
+///     |> revolve(axis = Y, angle = 180)
+/// ```
+///
+/// ```
+/// part001 = startSketchOn(XY)
+///     |> startProfileAt([4, 12], %)
+///     |> line(end = [2, 0])
+///     |> line(end = [0, -6])
+///     |> line(end = [4, -6])
+///     |> line(end = [0, -6])
+///     |> line(end = [-3.75, -4.5])
+///     |> line(end = [0, -5.5])
+///     |> line(end = [-2, 0])
+///     |> close()
+///     |> revolve(axis = Y, angle = 180)
+///
+/// part002 = startSketchOn(part001, 'end')
+///     |> startProfileAt([4.5, -5], %)
+///     |> line(end = [0, 5])
+///     |> line(end = [5, 0])
+///     |> line(end = [0, -5])
+///     |> close()
+///     |> extrude(length = 5)
+/// ```
+///
+/// ```
+/// box = startSketchOn(XY)
+///     |> startProfileAt([0, 0], %)
+///     |> line(end = [0, 20])
+///     |> line(end = [20, 0])
+///     |> line(end = [0, -20])
+///     |> close()
+///     |> extrude(length = 20)
+///
+/// sketch001 = startSketchOn(box, "END")
+///     |> circle( center = [10,10], radius = 4 )
+///     |> revolve(
+///         angle = -90,
+///         axis = Y
+///     )
+/// ```
+///
+/// ```
+/// box = startSketchOn(XY)
+///     |> startProfileAt([0, 0], %)
+///     |> line(end = [0, 20])
+///     |> line(end = [20, 0])
+///     |> line(end = [0, -20], tag = $revolveAxis)
+///     |> close()
+///     |> extrude(length = 20)
+///
+/// sketch001 = startSketchOn(box, "END")
+///     |> circle( center = [10,10], radius = 4 )
+///     |> revolve(
+///         angle = 90,
+///         axis = getOppositeEdge(revolveAxis)
+///     )
+/// ```
+///
+/// ```
+/// box = startSketchOn(XY)
+///     |> startProfileAt([0, 0], %)
+///     |> line(end = [0, 20])
+///     |> line(end = [20, 0])
+///     |> line(end = [0, -20], tag = $revolveAxis)
+///     |> close()
+///     |> extrude(length = 20)
+///
+/// sketch001 = startSketchOn(box, "END")
+///     |> circle( center = [10,10], radius = 4 )
+///     |> revolve(
+///         angle = 90,
+///         axis = getOppositeEdge(revolveAxis),
+///         tolerance = 0.0001
+///     )
+/// ```
+///
+/// ```
+/// sketch001 = startSketchOn(XY)
+///   |> startProfileAt([10, 0], %)
+///   |> line(end = [5, -5])
+///   |> line(end = [5, 5])
+///   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+///   |> close()
+///
+/// part001 = revolve(
+///    sketch001,
+///    axis = {
+///      direction = [0.0, 1.0],
+///      origin: [0.0, 0.0]
+///   }
+/// )
+/// ```
+///
+/// ```
+/// // Revolve two sketches around the same axis.
+///
+/// sketch001 = startSketchOn(XY)
+/// profile001 = startProfileAt([4, 8], sketch001)
+///     |> xLine(length = 3)
+///     |> yLine(length = -3)
+///     |> xLine(length = -3)
+///     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+///     |> close()
+///
+/// profile002 = startProfileAt([-5, 8], sketch001)
+///     |> xLine(length = 3)
+///     |> yLine(length = -3)
+///     |> xLine(length = -3)
+///     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+///     |> close()
+///
+/// revolve(
+///     [profile001, profile002],
+///     axis = X,
+/// )
+/// ```
+///
+/// ```
+/// // Revolve around a path that has not been extruded.
+///
+/// profile001 = startSketchOn(XY)
+///     |> startProfileAt([0, 0], %)
+///     |> line(end = [0, 20], tag = $revolveAxis)
+///     |> line(end = [20, 0])
+///     |> line(end = [0, -20])
+///     |> close(%)
+///
+/// sketch001 = startSketchOn(XY)
+///     |> circle(center = [-10, 10], radius = 4)
+///     |> revolve(angle = 90, axis = revolveAxis)
+/// ```
+///
+/// ```
+/// // Revolve around a path that has not been extruded or closed.
+///
+/// profile001 = startSketchOn(XY)
+///     |> startProfileAt([0, 0], %)
+///     |> line(end = [0, 20], tag = $revolveAxis)
+///     |> line(end = [20, 0])
+///
+/// sketch001 = startSketchOn(XY)
+///     |> circle(center = [-10, 10], radius = 4)
+///     |> revolve(angle = 90, axis = revolveAxis)
+/// ```
+@(impl = std_rust)
+export fn revolve(
+  /// The sketch or set of sketches that should be revolved
+  @sketches: [Sketch; 1+],
+  /// Axis of revolution.
+  axis: Axis2d | Edge,
+  /// Angle to revolve (in degrees). Default is 360.
+  angle?: number(deg),
+  /// Tolerance for the revolve operation.
+  tolerance?: number(mm),
+  /// A named tag for the face at the start of the revolve, i.e. the original sketch.
+  tagStart?: tag,
+  /// A named tag for the face at the end of the revolve.
+  tagEnd?: tag,
+): Solid {}

rust/kcl-lib/std/sketch.kcl

@@ -32,3 +32,74 @@ export fn circle(
   /// Create a new tag which refers to this circle.
   tag?: tag,
 ): Sketch {}
+
+/// Mirror a sketch.
+///
+/// Only works on unclosed sketches for now.
+///
+/// Mirror occurs around a local sketch axis rather than a global axis.
+///
+/// ```
+/// // Mirror an un-closed sketch across the Y axis.
+/// sketch001 = startSketchOn(XZ)
+///     |> startProfileAt([0, 10], %)
+///     |> line(end = [15, 0])
+///     |> line(end = [-7, -3])
+///     |> line(end = [9, -1])
+///     |> line(end = [-8, -5])
+///     |> line(end = [9, -3])
+///     |> line(end = [-8, -3])
+///     |> line(end = [9, -1])
+///     |> line(end = [-19, -0])
+///     |> mirror2d(axis = Y)
+///
+/// example = extrude(sketch001, length = 10)
+/// ```
+///
+/// ```
+/// // Mirror a un-closed sketch across the Y axis.
+/// sketch001 = startSketchOn(XZ)
+///     |> startProfileAt([0, 8.5], %)
+///     |> line(end = [20, -8.5])
+///     |> line(end = [-20, -8.5])
+///     |> mirror2d(axis = Y)
+///
+/// example = extrude(sketch001, length = 10)
+/// ```
+///
+/// ```
+/// // Mirror a un-closed sketch across an edge.
+/// helper001 = startSketchOn(XZ)
+///  |> startProfileAt([0, 0], %)
+///  |> line(end = [0, 10], tag = $edge001)
+///
+/// sketch001 = startSketchOn(XZ)
+///     |> startProfileAt([0, 8.5], %)
+///     |> line(end = [20, -8.5])
+///     |> line(end = [-20, -8.5])
+///     |> mirror2d(axis = edge001)
+///
+/// // example = extrude(sketch001, length = 10)
+/// ```
+///
+/// ```
+/// // Mirror an un-closed sketch across a custom axis.
+/// sketch001 = startSketchOn(XZ)
+///     |> startProfileAt([0, 8.5], %)
+///     |> line(end = [20, -8.5])
+///     |> line(end = [-20, -8.5])
+///     |> mirror2d(
+///       axis = {
+///         direction = [0.0, 1.0],
+///         origin = [0.0, 0.0]
+///       })
+///
+/// example = extrude(sketch001, length = 10)
+/// ```
+@(impl = std_rust)
+export fn mirror2d(
+  /// The sketch or sketches to be reflected.
+  @sketches: [Sketch; 1+],
+  /// The axis to refect around.
+  axis: Axis2d | Edge,
+): Sketch {}

rust/kcl-lib/std/turns.kcl

@@ -0,0 +1,6 @@
+@no_std
+
+export ZERO = 0
+export QUARTER_TURN = 90deg
+export HALF_TURN = 180deg
+export THREE_QUARTER_TURN = 270deg

rust/kcl-lib/tests/assembly_mixed_units_cubes/artifact_graph_flowchart.snap.md

@@ -1,25 +1,25 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[76, 113, 4]"]
-    3["Segment<br>[119, 136, 4]"]
-    4["Segment<br>[142, 160, 4]"]
-    5["Segment<br>[166, 184, 4]"]
-    6["Segment<br>[190, 246, 4]"]
-    7["Segment<br>[252, 259, 4]"]
+    2["Path<br>[76, 113, 5]"]
+    3["Segment<br>[119, 136, 5]"]
+    4["Segment<br>[142, 160, 5]"]
+    5["Segment<br>[166, 184, 5]"]
+    6["Segment<br>[190, 246, 5]"]
+    7["Segment<br>[252, 259, 5]"]
     8[Solid2d]
   end
   subgraph path25 [Path]
-    25["Path<br>[76, 111, 5]"]
-    26["Segment<br>[117, 134, 5]"]
-    27["Segment<br>[140, 158, 5]"]
-    28["Segment<br>[164, 182, 5]"]
-    29["Segment<br>[188, 244, 5]"]
-    30["Segment<br>[250, 257, 5]"]
+    25["Path<br>[76, 111, 6]"]
+    26["Segment<br>[117, 134, 6]"]
+    27["Segment<br>[140, 158, 6]"]
+    28["Segment<br>[164, 182, 6]"]
+    29["Segment<br>[188, 244, 6]"]
+    30["Segment<br>[250, 257, 6]"]
     31[Solid2d]
   end
-  1["Plane<br>[47, 66, 4]"]
-  9["Sweep Extrusion<br>[265, 287, 4]"]
+  1["Plane<br>[47, 66, 5]"]
+  9["Sweep Extrusion<br>[265, 287, 5]"]
   10[Wall]
   11[Wall]
   12[Wall]
@@ -34,8 +34,8 @@ flowchart LR
   21["SweepEdge Adjacent"]
   22["SweepEdge Opposite"]
   23["SweepEdge Adjacent"]
-  24["Plane<br>[47, 66, 5]"]
-  32["Sweep Extrusion<br>[263, 285, 5]"]
+  24["Plane<br>[47, 66, 6]"]
+  32["Sweep Extrusion<br>[263, 285, 6]"]
   33[Wall]
   34[Wall]
   35[Wall]

rust/kcl-lib/tests/assembly_mixed_units_cubes/program_memory.snap

@@ -5,10 +5,10 @@ description: Variables in memory after executing assembly_mixed_units_cubes.kcl
 {
   "cubeIn": {
     "type": "Module",
-    "value": 4
+    "value": 5
   },
   "cubeMm": {
     "type": "Module",
-    "value": 5
+    "value": 6
   }
 }

rust/kcl-lib/tests/assembly_non_default_units/artifact_graph_flowchart.snap.md

@@ -1,17 +1,17 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[197, 232, 4]"]
-    3["Segment<br>[197, 232, 4]"]
+    2["Path<br>[197, 232, 5]"]
+    3["Segment<br>[197, 232, 5]"]
     4[Solid2d]
   end
   subgraph path6 [Path]
-    6["Path<br>[113, 148, 5]"]
-    7["Segment<br>[113, 148, 5]"]
+    6["Path<br>[113, 148, 6]"]
+    7["Segment<br>[113, 148, 6]"]
     8[Solid2d]
   end
-  1["Plane<br>[172, 191, 4]"]
-  5["Plane<br>[88, 107, 5]"]
+  1["Plane<br>[172, 191, 5]"]
+  5["Plane<br>[88, 107, 6]"]
   1 --- 2
   2 --- 3
   2 --- 4

rust/kcl-lib/tests/assembly_non_default_units/program_memory.snap

@@ -5,10 +5,10 @@ description: Variables in memory after executing assembly_non_default_units.kcl
 {
   "other1": {
     "type": "Module",
-    "value": 4
+    "value": 5
   },
   "other2": {
     "type": "Module",
-    "value": 5
+    "value": 6
   }
 }

rust/kcl-lib/tests/crazy_multi_profile/ops.snap

@@ -148,6 +148,22 @@ description: Operations executed crazy_multi_profile.kcl
     "type": "UserDefinedFunctionReturn"
   },
   {
+    "type": "UserDefinedFunctionCall",
+    "name": "revolve",
+    "functionSourceRange": [
+      0,
+      0,
+      0
+    ],
+    "unlabeledArg": {
+      "value": {
+        "type": "Sketch",
+        "value": {
+          "artifactId": "[uuid]"
+        }
+      },
+      "sourceRange": []
+    },
     "labeledArgs": {
       "angle": {
         "value": {
@@ -173,18 +189,54 @@ description: Operations executed crazy_multi_profile.kcl
         "sourceRange": []
       }
     },
-    "name": "revolve",
-    "sourceRange": [],
-    "type": "StdLibCall",
+    "sourceRange": []
+  },
+  {
+    "type": "KclStdLibCall",
+    "name": "",
     "unlabeledArg": {
       "value": {
-        "type": "Sketch",
-        "value": {
-          "artifactId": "[uuid]"
-        }
+        "type": "Array",
+        "value": [
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          }
+        ]
       },
       "sourceRange": []
-    }
+    },
+    "labeledArgs": {
+      "angle": {
+        "value": {
+          "type": "Number",
+          "value": 45.0,
+          "ty": {
+            "type": "Default",
+            "len": {
+              "type": "Mm"
+            },
+            "angle": {
+              "type": "Degrees"
+            }
+          }
+        },
+        "sourceRange": []
+      },
+      "axis": {
+        "value": {
+          "type": "Uuid",
+          "value": "[uuid]"
+        },
+        "sourceRange": []
+      }
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "UserDefinedFunctionReturn"
   },
   {
     "labeledArgs": {
@@ -338,6 +390,22 @@ description: Operations executed crazy_multi_profile.kcl
     }
   },
   {
+    "type": "UserDefinedFunctionCall",
+    "name": "revolve",
+    "functionSourceRange": [
+      0,
+      0,
+      0
+    ],
+    "unlabeledArg": {
+      "value": {
+        "type": "Sketch",
+        "value": {
+          "artifactId": "[uuid]"
+        }
+      },
+      "sourceRange": []
+    },
     "labeledArgs": {
       "angle": {
         "value": {
@@ -364,17 +432,54 @@ description: Operations executed crazy_multi_profile.kcl
         "sourceRange": []
       }
     },
-    "name": "revolve",
-    "sourceRange": [],
-    "type": "StdLibCall",
+    "sourceRange": []
+  },
+  {
+    "type": "KclStdLibCall",
+    "name": "",
     "unlabeledArg": {
       "value": {
-        "type": "Sketch",
-        "value": {
-          "artifactId": "[uuid]"
-        }
+        "type": "Array",
+        "value": [
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          }
+        ]
       },
       "sourceRange": []
-    }
+    },
+    "labeledArgs": {
+      "angle": {
+        "value": {
+          "type": "Number",
+          "value": 45.0,
+          "ty": {
+            "type": "Default",
+            "len": {
+              "type": "Mm"
+            },
+            "angle": {
+              "type": "Degrees"
+            }
+          }
+        },
+        "sourceRange": []
+      },
+      "axis": {
+        "value": {
+          "type": "TagIdentifier",
+          "value": "seg02",
+          "artifact_id": "[uuid]"
+        },
+        "sourceRange": []
+      }
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "UserDefinedFunctionReturn"
   }
 ]

rust/kcl-lib/tests/helix_ccw/ops.snap

@@ -117,6 +117,14 @@ description: Operations executed helix_ccw.kcl
     }
   },
   {
+    "type": "UserDefinedFunctionCall",
+    "name": "helix",
+    "functionSourceRange": [
+      0,
+      0,
+      0
+    ],
+    "unlabeledArg": null,
     "labeledArgs": {
       "angleStart": {
         "value": {
@@ -167,9 +175,11 @@ description: Operations executed helix_ccw.kcl
         "sourceRange": []
       }
     },
-    "name": "helix",
-    "sourceRange": [],
-    "type": "StdLibCall",
+    "sourceRange": []
+  },
+  {
+    "type": "KclStdLibCall",
+    "name": "",
     "unlabeledArg": {
       "value": {
         "type": "Solid",
@@ -178,6 +188,60 @@ description: Operations executed helix_ccw.kcl
         }
       },
       "sourceRange": []
-    }
+    },
+    "labeledArgs": {
+      "angleStart": {
+        "value": {
+          "type": "Number",
+          "value": 0.0,
+          "ty": {
+            "type": "Default",
+            "len": {
+              "type": "Mm"
+            },
+            "angle": {
+              "type": "Degrees"
+            }
+          }
+        },
+        "sourceRange": []
+      },
+      "ccw": {
+        "value": {
+          "type": "Bool",
+          "value": true
+        },
+        "sourceRange": []
+      },
+      "cylinder": {
+        "value": {
+          "type": "Solid",
+          "value": {
+            "artifactId": "[uuid]"
+          }
+        },
+        "sourceRange": []
+      },
+      "revolutions": {
+        "value": {
+          "type": "Number",
+          "value": 16.0,
+          "ty": {
+            "type": "Default",
+            "len": {
+              "type": "Mm"
+            },
+            "angle": {
+              "type": "Degrees"
+            }
+          }
+        },
+        "sourceRange": []
+      }
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "UserDefinedFunctionReturn"
   }
 ]

rust/kcl-lib/tests/helix_simple/ops.snap

@@ -19,6 +19,14 @@ description: Operations executed helix_simple.kcl
     "unlabeledArg": null
   },
   {
+    "type": "UserDefinedFunctionCall",
+    "name": "helix",
+    "functionSourceRange": [
+      0,
+      0,
+      0
+    ],
+    "unlabeledArg": null,
     "labeledArgs": {
       "angleStart": {
         "value": {
@@ -100,9 +108,96 @@ description: Operations executed helix_simple.kcl
         "sourceRange": []
       }
     },
-    "name": "helix",
-    "sourceRange": [],
-    "type": "StdLibCall",
-    "unlabeledArg": null
+    "sourceRange": []
+  },
+  {
+    "type": "KclStdLibCall",
+    "name": "",
+    "unlabeledArg": null,
+    "labeledArgs": {
+      "angleStart": {
+        "value": {
+          "type": "Number",
+          "value": 0.0,
+          "ty": {
+            "type": "Default",
+            "len": {
+              "type": "Mm"
+            },
+            "angle": {
+              "type": "Degrees"
+            }
+          }
+        },
+        "sourceRange": []
+      },
+      "axis": {
+        "value": {
+          "type": "TagIdentifier",
+          "value": "edge001",
+          "artifact_id": "[uuid]"
+        },
+        "sourceRange": []
+      },
+      "ccw": {
+        "value": {
+          "type": "Bool",
+          "value": true
+        },
+        "sourceRange": []
+      },
+      "length": {
+        "value": {
+          "type": "Number",
+          "value": 10.0,
+          "ty": {
+            "type": "Default",
+            "len": {
+              "type": "Mm"
+            },
+            "angle": {
+              "type": "Degrees"
+            }
+          }
+        },
+        "sourceRange": []
+      },
+      "radius": {
+        "value": {
+          "type": "Number",
+          "value": 5.0,
+          "ty": {
+            "type": "Default",
+            "len": {
+              "type": "Mm"
+            },
+            "angle": {
+              "type": "Degrees"
+            }
+          }
+        },
+        "sourceRange": []
+      },
+      "revolutions": {
+        "value": {
+          "type": "Number",
+          "value": 5.0,
+          "ty": {
+            "type": "Default",
+            "len": {
+              "type": "Mm"
+            },
+            "angle": {
+              "type": "Degrees"
+            }
+          }
+        },
+        "sourceRange": []
+      }
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "UserDefinedFunctionReturn"
   }
 ]

rust/kcl-lib/tests/import_foreign/program_memory.snap

@@ -5,7 +5,7 @@ description: Variables in memory after executing import_foreign.kcl
 {
   "cube": {
     "type": "Module",
-    "value": 4
+    "value": 5
   },
   "model": {
     "type": "ImportedGeometry",

rust/kcl-lib/tests/import_function_not_sketch/my_functions.kcl

@@ -1,6 +1,6 @@
 @settings(defaultLengthUnit = mm)
 
-export part001 = startSketchOn('XY')
+export part001 = startSketchOn(XY)
   |> startProfileAt([4, 12], %)
   |> line(end = [2, 0])
   |> line(end = [0, -6])
@@ -10,7 +10,7 @@ export part001 = startSketchOn('XY')
   |> line(end = [0, -5.5])
   |> line(end = [-2, 0])
   |> close()
-  |> revolve(axis = 'y') // default angle is 360
+  |> revolve(axis = Y) // default angle is 360
 
 export fn two() {
   return 5

rust/kcl-lib/tests/import_function_not_sketch/ops.snap

@@ -7,8 +7,8 @@ description: Operations executed import_function_not_sketch.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
-          "value": "XY"
+          "type": "Plane",
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -19,18 +19,117 @@ description: Operations executed import_function_not_sketch.kcl
     "unlabeledArg": null
   },
   {
+    "type": "UserDefinedFunctionCall",
+    "name": "revolve",
+    "functionSourceRange": [
+      0,
+      0,
+      0
+    ],
+    "unlabeledArg": null,
     "labeledArgs": {
       "axis": {
         "value": {
-          "type": "String",
-          "value": "y"
+          "type": "Object",
+          "value": {
+            "direction": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 1.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            },
+            "origin": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            }
+          }
         },
         "sourceRange": []
       }
     },
-    "name": "revolve",
-    "sourceRange": [],
-    "type": "StdLibCall",
+    "sourceRange": []
+  },
+  {
+    "type": "KclStdLibCall",
+    "name": "",
     "unlabeledArg": {
       "value": {
         "type": "Sketch",
@@ -39,6 +138,82 @@ description: Operations executed import_function_not_sketch.kcl
         }
       },
       "sourceRange": []
-    }
+    },
+    "labeledArgs": {
+      "axis": {
+        "value": {
+          "type": "Object",
+          "value": {
+            "direction": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 1.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            },
+            "origin": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            }
+          }
+        },
+        "sourceRange": []
+      }
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "UserDefinedFunctionReturn"
   }
 ]

rust/kcl-lib/tests/import_function_not_sketch/unparsed@my_functions.kcl.snap

@@ -14,7 +14,7 @@ export part001 = startSketchOn(XY)
   |> line(end = [0, -5.5])
   |> line(end = [-2, 0])
   |> close()
-  |> revolve(axis = 'y') // default angle is 360
+  |> revolve(axis = Y) // default angle is 360
 
 export fn two() {
   return 5

rust/kcl-lib/tests/import_transform/program_memory.snap

@@ -5,6 +5,6 @@ description: Variables in memory after executing import_transform.kcl
 {
   "screw": {
     "type": "Module",
-    "value": 4
+    "value": 5
   }
 }

rust/kcl-lib/tests/import_whole/artifact_graph_flowchart.snap.md

@@ -1,12 +1,12 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[83, 119, 4]"]
-    3["Segment<br>[83, 119, 4]"]
+    2["Path<br>[83, 119, 5]"]
+    3["Segment<br>[83, 119, 5]"]
     4[Solid2d]
   end
-  1["Plane<br>[60, 77, 4]"]
-  5["Sweep Extrusion<br>[125, 145, 4]"]
+  1["Plane<br>[60, 77, 5]"]
+  5["Sweep Extrusion<br>[125, 145, 5]"]
   6[Wall]
   7["Cap Start"]
   8["Cap End"]

rust/kcl-lib/tests/import_whole/program_memory.snap

@@ -111,6 +111,6 @@ description: Variables in memory after executing import_whole.kcl
   },
   "foo": {
     "type": "Module",
-    "value": 4
+    "value": 5
   }
 }

rust/kcl-lib/tests/kcl_samples/ball-bearing/artifact_graph_flowchart.snap.md

@@ -17,26 +17,26 @@ flowchart LR
     18[Solid2d]
   end
   subgraph path24 [Path]
-    24["Path<br>[1576, 1709, 0]"]
-    25["Segment<br>[1715, 1808, 0]"]
-    26["Segment<br>[1814, 1845, 0]"]
-    27["Segment<br>[1851, 1879, 0]"]
-    28["Segment<br>[1885, 1892, 0]"]
+    24["Path<br>[1574, 1707, 0]"]
+    25["Segment<br>[1713, 1806, 0]"]
+    26["Segment<br>[1812, 1843, 0]"]
+    27["Segment<br>[1849, 1877, 0]"]
+    28["Segment<br>[1883, 1890, 0]"]
     29[Solid2d]
   end
   subgraph path40 [Path]
-    40["Path<br>[2228, 2370, 0]"]
-    41["Segment<br>[2228, 2370, 0]"]
+    40["Path<br>[2224, 2366, 0]"]
+    41["Segment<br>[2224, 2366, 0]"]
     42[Solid2d]
   end
   subgraph path50 [Path]
-    50["Path<br>[2766, 2819, 0]"]
-    51["Segment<br>[2766, 2819, 0]"]
+    50["Path<br>[2760, 2813, 0]"]
+    51["Segment<br>[2760, 2813, 0]"]
     52[Solid2d]
   end
   subgraph path53 [Path]
-    53["Path<br>[2830, 2904, 0]"]
-    54["Segment<br>[2830, 2904, 0]"]
+    53["Path<br>[2824, 2898, 0]"]
+    54["Segment<br>[2824, 2898, 0]"]
     55[Solid2d]
   end
   1["Plane<br>[677, 724, 0]"]
@@ -47,12 +47,12 @@ flowchart LR
   12["SweepEdge Opposite"]
   13["SweepEdge Adjacent"]
   14["Plane<br>[1014, 1031, 0]"]
-  19["Sweep Revolve<br>[1286, 1318, 0]"]
+  19["Sweep Revolve<br>[1286, 1316, 0]"]
   20[Wall]
   21[Wall]
   22["SweepEdge Adjacent"]
-  23["Plane<br>[1553, 1570, 0]"]
-  30["Sweep Revolve<br>[1934, 1966, 0]"]
+  23["Plane<br>[1551, 1568, 0]"]
+  30["Sweep Revolve<br>[1932, 1962, 0]"]
   31[Wall]
   32[Wall]
   33[Wall]
@@ -61,22 +61,22 @@ flowchart LR
   36["SweepEdge Adjacent"]
   37["SweepEdge Adjacent"]
   38["SweepEdge Adjacent"]
-  39["Plane<br>[2205, 2222, 0]"]
-  43["Sweep Revolve<br>[2413, 2466, 0]"]
+  39["Plane<br>[2201, 2218, 0]"]
+  43["Sweep Revolve<br>[2409, 2460, 0]"]
   44[Wall]
   45["Cap Start"]
   46["Cap End"]
   47["SweepEdge Opposite"]
   48["SweepEdge Adjacent"]
-  49["Plane<br>[2712, 2759, 0]"]
-  56["Sweep Extrusion<br>[2924, 2977, 0]"]
+  49["Plane<br>[2706, 2753, 0]"]
+  56["Sweep Extrusion<br>[2918, 2971, 0]"]
   57[Wall]
   58["Cap Start"]
   59["Cap End"]
   60["SweepEdge Opposite"]
   61["SweepEdge Adjacent"]
   62["StartSketchOnPlane<br>[663, 725, 0]"]
-  63["StartSketchOnPlane<br>[2698, 2760, 0]"]
+  63["StartSketchOnPlane<br>[2692, 2754, 0]"]
   1 --- 2
   1 --- 5
   2 --- 3

rust/kcl-lib/tests/kcl_samples/ball-bearing/ops.snap

@@ -236,18 +236,13 @@ description: Operations executed ball-bearing.kcl
     "unlabeledArg": null
   },
   {
-    "labeledArgs": {
-      "axis": {
-        "value": {
-          "type": "String",
-          "value": "X"
-        },
-        "sourceRange": []
-      }
-    },
+    "type": "UserDefinedFunctionCall",
     "name": "revolve",
-    "sourceRange": [],
-    "type": "StdLibCall",
+    "functionSourceRange": [
+      0,
+      0,
+      0
+    ],
     "unlabeledArg": {
       "value": {
         "type": "Sketch",
@@ -256,7 +251,200 @@ description: Operations executed ball-bearing.kcl
         }
       },
       "sourceRange": []
-    }
+    },
+    "labeledArgs": {
+      "axis": {
+        "value": {
+          "type": "Object",
+          "value": {
+            "direction": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 1.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            },
+            "origin": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            }
+          }
+        },
+        "sourceRange": []
+      }
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "KclStdLibCall",
+    "name": "",
+    "unlabeledArg": {
+      "value": {
+        "type": "Array",
+        "value": [
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          }
+        ]
+      },
+      "sourceRange": []
+    },
+    "labeledArgs": {
+      "axis": {
+        "value": {
+          "type": "Object",
+          "value": {
+            "direction": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 1.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            },
+            "origin": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            }
+          }
+        },
+        "sourceRange": []
+      }
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "UserDefinedFunctionReturn"
   },
   {
     "labeledArgs": {
@@ -438,18 +626,13 @@ description: Operations executed ball-bearing.kcl
     "type": "UserDefinedFunctionReturn"
   },
   {
-    "labeledArgs": {
-      "axis": {
-        "value": {
-          "type": "String",
-          "value": "X"
-        },
-        "sourceRange": []
-      }
-    },
+    "type": "UserDefinedFunctionCall",
     "name": "revolve",
-    "sourceRange": [],
-    "type": "StdLibCall",
+    "functionSourceRange": [
+      0,
+      0,
+      0
+    ],
     "unlabeledArg": {
       "value": {
         "type": "Sketch",
@@ -458,7 +641,200 @@ description: Operations executed ball-bearing.kcl
         }
       },
       "sourceRange": []
-    }
+    },
+    "labeledArgs": {
+      "axis": {
+        "value": {
+          "type": "Object",
+          "value": {
+            "direction": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 1.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            },
+            "origin": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            }
+          }
+        },
+        "sourceRange": []
+      }
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "KclStdLibCall",
+    "name": "",
+    "unlabeledArg": {
+      "value": {
+        "type": "Array",
+        "value": [
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          }
+        ]
+      },
+      "sourceRange": []
+    },
+    "labeledArgs": {
+      "axis": {
+        "value": {
+          "type": "Object",
+          "value": {
+            "direction": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 1.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            },
+            "origin": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            }
+          }
+        },
+        "sourceRange": []
+      }
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "UserDefinedFunctionReturn"
   },
   {
     "labeledArgs": {
@@ -679,6 +1055,22 @@ description: Operations executed ball-bearing.kcl
     "type": "UserDefinedFunctionReturn"
   },
   {
+    "type": "UserDefinedFunctionCall",
+    "name": "revolve",
+    "functionSourceRange": [
+      0,
+      0,
+      0
+    ],
+    "unlabeledArg": {
+      "value": {
+        "type": "Sketch",
+        "value": {
+          "artifactId": "[uuid]"
+        }
+      },
+      "sourceRange": []
+    },
     "labeledArgs": {
       "angle": {
         "value": {
@@ -692,24 +1084,206 @@ description: Operations executed ball-bearing.kcl
       },
       "axis": {
         "value": {
-          "type": "String",
-          "value": "Y"
+          "type": "Object",
+          "value": {
+            "direction": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 1.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            },
+            "origin": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            }
+          }
         },
         "sourceRange": []
       }
     },
-    "name": "revolve",
-    "sourceRange": [],
-    "type": "StdLibCall",
+    "sourceRange": []
+  },
+  {
+    "type": "KclStdLibCall",
+    "name": "",
     "unlabeledArg": {
       "value": {
-        "type": "Sketch",
-        "value": {
-          "artifactId": "[uuid]"
-        }
+        "type": "Array",
+        "value": [
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          }
+        ]
       },
       "sourceRange": []
-    }
+    },
+    "labeledArgs": {
+      "angle": {
+        "value": {
+          "type": "Number",
+          "value": 36.0,
+          "ty": {
+            "type": "Unknown"
+          }
+        },
+        "sourceRange": []
+      },
+      "axis": {
+        "value": {
+          "type": "Object",
+          "value": {
+            "direction": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 1.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            },
+            "origin": {
+              "type": "Array",
+              "value": [
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                },
+                {
+                  "type": "Number",
+                  "value": 0.0,
+                  "ty": {
+                    "type": "Default",
+                    "len": {
+                      "type": "Mm"
+                    },
+                    "angle": {
+                      "type": "Degrees"
+                    }
+                  }
+                }
+              ]
+            }
+          }
+        },
+        "sourceRange": []
+      }
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "UserDefinedFunctionReturn"
   },
   {
     "labeledArgs": {

rust/kcl-lib/tests/kcl_samples/bench/artifact_graph_flowchart.snap.md

@@ -1,239 +1,239 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[361, 394, 4]"]
-    3["Segment<br>[402, 428, 4]"]
-    4["Segment<br>[436, 489, 4]"]
-    5["Segment<br>[497, 550, 4]"]
-    6["Segment<br>[558, 612, 4]"]
-    7["Segment<br>[620, 645, 4]"]
-    8["Segment<br>[653, 673, 4]"]
-    9["Segment<br>[681, 705, 4]"]
-    10["Segment<br>[713, 766, 4]"]
-    11["Segment<br>[774, 799, 4]"]
-    12["Segment<br>[807, 827, 4]"]
-    13["Segment<br>[835, 859, 4]"]
-    14["Segment<br>[867, 919, 4]"]
-    15["Segment<br>[927, 979, 4]"]
-    16["Segment<br>[987, 1012, 4]"]
-    17["Segment<br>[1020, 1044, 4]"]
-    18["Segment<br>[1052, 1105, 4]"]
-    19["Segment<br>[1113, 1138, 4]"]
-    20["Segment<br>[1146, 1173, 4]"]
-    21["Segment<br>[1181, 1233, 4]"]
-    22["Segment<br>[1241, 1276, 4]"]
-    23["Segment<br>[1284, 1291, 4]"]
+    2["Path<br>[361, 394, 5]"]
+    3["Segment<br>[402, 428, 5]"]
+    4["Segment<br>[436, 489, 5]"]
+    5["Segment<br>[497, 550, 5]"]
+    6["Segment<br>[558, 612, 5]"]
+    7["Segment<br>[620, 645, 5]"]
+    8["Segment<br>[653, 673, 5]"]
+    9["Segment<br>[681, 705, 5]"]
+    10["Segment<br>[713, 766, 5]"]
+    11["Segment<br>[774, 799, 5]"]
+    12["Segment<br>[807, 827, 5]"]
+    13["Segment<br>[835, 859, 5]"]
+    14["Segment<br>[867, 919, 5]"]
+    15["Segment<br>[927, 979, 5]"]
+    16["Segment<br>[987, 1012, 5]"]
+    17["Segment<br>[1020, 1044, 5]"]
+    18["Segment<br>[1052, 1105, 5]"]
+    19["Segment<br>[1113, 1138, 5]"]
+    20["Segment<br>[1146, 1173, 5]"]
+    21["Segment<br>[1181, 1233, 5]"]
+    22["Segment<br>[1241, 1276, 5]"]
+    23["Segment<br>[1284, 1291, 5]"]
     24[Solid2d]
   end
   subgraph path89 [Path]
-    89["Path<br>[361, 394, 4]"]
-    90["Segment<br>[402, 428, 4]"]
-    91["Segment<br>[436, 489, 4]"]
-    92["Segment<br>[497, 550, 4]"]
-    93["Segment<br>[558, 612, 4]"]
-    94["Segment<br>[620, 645, 4]"]
-    95["Segment<br>[653, 673, 4]"]
-    96["Segment<br>[681, 705, 4]"]
-    97["Segment<br>[713, 766, 4]"]
-    98["Segment<br>[774, 799, 4]"]
-    99["Segment<br>[807, 827, 4]"]
-    100["Segment<br>[835, 859, 4]"]
-    101["Segment<br>[867, 919, 4]"]
-    102["Segment<br>[927, 979, 4]"]
-    103["Segment<br>[987, 1012, 4]"]
-    104["Segment<br>[1020, 1044, 4]"]
-    105["Segment<br>[1052, 1105, 4]"]
-    106["Segment<br>[1113, 1138, 4]"]
-    107["Segment<br>[1146, 1173, 4]"]
-    108["Segment<br>[1181, 1233, 4]"]
-    109["Segment<br>[1241, 1276, 4]"]
-    110["Segment<br>[1284, 1291, 4]"]
+    89["Path<br>[361, 394, 5]"]
+    90["Segment<br>[402, 428, 5]"]
+    91["Segment<br>[436, 489, 5]"]
+    92["Segment<br>[497, 550, 5]"]
+    93["Segment<br>[558, 612, 5]"]
+    94["Segment<br>[620, 645, 5]"]
+    95["Segment<br>[653, 673, 5]"]
+    96["Segment<br>[681, 705, 5]"]
+    97["Segment<br>[713, 766, 5]"]
+    98["Segment<br>[774, 799, 5]"]
+    99["Segment<br>[807, 827, 5]"]
+    100["Segment<br>[835, 859, 5]"]
+    101["Segment<br>[867, 919, 5]"]
+    102["Segment<br>[927, 979, 5]"]
+    103["Segment<br>[987, 1012, 5]"]
+    104["Segment<br>[1020, 1044, 5]"]
+    105["Segment<br>[1052, 1105, 5]"]
+    106["Segment<br>[1113, 1138, 5]"]
+    107["Segment<br>[1146, 1173, 5]"]
+    108["Segment<br>[1181, 1233, 5]"]
+    109["Segment<br>[1241, 1276, 5]"]
+    110["Segment<br>[1284, 1291, 5]"]
     111[Solid2d]
   end
   subgraph path176 [Path]
-    176["Path<br>[361, 394, 4]"]
-    177["Segment<br>[402, 428, 4]"]
-    178["Segment<br>[436, 489, 4]"]
-    179["Segment<br>[497, 550, 4]"]
-    180["Segment<br>[558, 612, 4]"]
-    181["Segment<br>[620, 645, 4]"]
-    182["Segment<br>[653, 673, 4]"]
-    183["Segment<br>[681, 705, 4]"]
-    184["Segment<br>[713, 766, 4]"]
-    185["Segment<br>[774, 799, 4]"]
-    186["Segment<br>[807, 827, 4]"]
-    187["Segment<br>[835, 859, 4]"]
-    188["Segment<br>[867, 919, 4]"]
-    189["Segment<br>[927, 979, 4]"]
-    190["Segment<br>[987, 1012, 4]"]
-    191["Segment<br>[1020, 1044, 4]"]
-    192["Segment<br>[1052, 1105, 4]"]
-    193["Segment<br>[1113, 1138, 4]"]
-    194["Segment<br>[1146, 1173, 4]"]
-    195["Segment<br>[1181, 1233, 4]"]
-    196["Segment<br>[1241, 1276, 4]"]
-    197["Segment<br>[1284, 1291, 4]"]
+    176["Path<br>[361, 394, 5]"]
+    177["Segment<br>[402, 428, 5]"]
+    178["Segment<br>[436, 489, 5]"]
+    179["Segment<br>[497, 550, 5]"]
+    180["Segment<br>[558, 612, 5]"]
+    181["Segment<br>[620, 645, 5]"]
+    182["Segment<br>[653, 673, 5]"]
+    183["Segment<br>[681, 705, 5]"]
+    184["Segment<br>[713, 766, 5]"]
+    185["Segment<br>[774, 799, 5]"]
+    186["Segment<br>[807, 827, 5]"]
+    187["Segment<br>[835, 859, 5]"]
+    188["Segment<br>[867, 919, 5]"]
+    189["Segment<br>[927, 979, 5]"]
+    190["Segment<br>[987, 1012, 5]"]
+    191["Segment<br>[1020, 1044, 5]"]
+    192["Segment<br>[1052, 1105, 5]"]
+    193["Segment<br>[1113, 1138, 5]"]
+    194["Segment<br>[1146, 1173, 5]"]
+    195["Segment<br>[1181, 1233, 5]"]
+    196["Segment<br>[1241, 1276, 5]"]
+    197["Segment<br>[1284, 1291, 5]"]
     198[Solid2d]
   end
   subgraph path262 [Path]
-    262["Path<br>[361, 394, 4]"]
-    263["Segment<br>[402, 428, 4]"]
-    264["Segment<br>[436, 489, 4]"]
-    265["Segment<br>[497, 550, 4]"]
-    266["Segment<br>[558, 612, 4]"]
-    267["Segment<br>[620, 645, 4]"]
-    268["Segment<br>[653, 673, 4]"]
-    269["Segment<br>[681, 705, 4]"]
-    270["Segment<br>[713, 766, 4]"]
-    271["Segment<br>[774, 799, 4]"]
-    272["Segment<br>[807, 827, 4]"]
-    273["Segment<br>[835, 859, 4]"]
-    274["Segment<br>[867, 919, 4]"]
-    275["Segment<br>[927, 979, 4]"]
-    276["Segment<br>[987, 1012, 4]"]
-    277["Segment<br>[1020, 1044, 4]"]
-    278["Segment<br>[1052, 1105, 4]"]
-    279["Segment<br>[1113, 1138, 4]"]
-    280["Segment<br>[1146, 1173, 4]"]
-    281["Segment<br>[1181, 1233, 4]"]
-    282["Segment<br>[1241, 1276, 4]"]
-    283["Segment<br>[1284, 1291, 4]"]
+    262["Path<br>[361, 394, 5]"]
+    263["Segment<br>[402, 428, 5]"]
+    264["Segment<br>[436, 489, 5]"]
+    265["Segment<br>[497, 550, 5]"]
+    266["Segment<br>[558, 612, 5]"]
+    267["Segment<br>[620, 645, 5]"]
+    268["Segment<br>[653, 673, 5]"]
+    269["Segment<br>[681, 705, 5]"]
+    270["Segment<br>[713, 766, 5]"]
+    271["Segment<br>[774, 799, 5]"]
+    272["Segment<br>[807, 827, 5]"]
+    273["Segment<br>[835, 859, 5]"]
+    274["Segment<br>[867, 919, 5]"]
+    275["Segment<br>[927, 979, 5]"]
+    276["Segment<br>[987, 1012, 5]"]
+    277["Segment<br>[1020, 1044, 5]"]
+    278["Segment<br>[1052, 1105, 5]"]
+    279["Segment<br>[1113, 1138, 5]"]
+    280["Segment<br>[1146, 1173, 5]"]
+    281["Segment<br>[1181, 1233, 5]"]
+    282["Segment<br>[1241, 1276, 5]"]
+    283["Segment<br>[1284, 1291, 5]"]
     284[Solid2d]
   end
   subgraph path349 [Path]
-    349["Path<br>[361, 394, 4]"]
-    350["Segment<br>[402, 428, 4]"]
-    351["Segment<br>[436, 489, 4]"]
-    352["Segment<br>[497, 550, 4]"]
-    353["Segment<br>[558, 612, 4]"]
-    354["Segment<br>[620, 645, 4]"]
-    355["Segment<br>[653, 673, 4]"]
-    356["Segment<br>[681, 705, 4]"]
-    357["Segment<br>[713, 766, 4]"]
-    358["Segment<br>[774, 799, 4]"]
-    359["Segment<br>[807, 827, 4]"]
-    360["Segment<br>[835, 859, 4]"]
-    361["Segment<br>[867, 919, 4]"]
-    362["Segment<br>[927, 979, 4]"]
-    363["Segment<br>[987, 1012, 4]"]
-    364["Segment<br>[1020, 1044, 4]"]
-    365["Segment<br>[1052, 1105, 4]"]
-    366["Segment<br>[1113, 1138, 4]"]
-    367["Segment<br>[1146, 1173, 4]"]
-    368["Segment<br>[1181, 1233, 4]"]
-    369["Segment<br>[1241, 1276, 4]"]
-    370["Segment<br>[1284, 1291, 4]"]
+    349["Path<br>[361, 394, 5]"]
+    350["Segment<br>[402, 428, 5]"]
+    351["Segment<br>[436, 489, 5]"]
+    352["Segment<br>[497, 550, 5]"]
+    353["Segment<br>[558, 612, 5]"]
+    354["Segment<br>[620, 645, 5]"]
+    355["Segment<br>[653, 673, 5]"]
+    356["Segment<br>[681, 705, 5]"]
+    357["Segment<br>[713, 766, 5]"]
+    358["Segment<br>[774, 799, 5]"]
+    359["Segment<br>[807, 827, 5]"]
+    360["Segment<br>[835, 859, 5]"]
+    361["Segment<br>[867, 919, 5]"]
+    362["Segment<br>[927, 979, 5]"]
+    363["Segment<br>[987, 1012, 5]"]
+    364["Segment<br>[1020, 1044, 5]"]
+    365["Segment<br>[1052, 1105, 5]"]
+    366["Segment<br>[1113, 1138, 5]"]
+    367["Segment<br>[1146, 1173, 5]"]
+    368["Segment<br>[1181, 1233, 5]"]
+    369["Segment<br>[1241, 1276, 5]"]
+    370["Segment<br>[1284, 1291, 5]"]
     371[Solid2d]
   end
   subgraph path435 [Path]
-    435["Path<br>[361, 394, 4]"]
-    436["Segment<br>[402, 428, 4]"]
-    437["Segment<br>[436, 489, 4]"]
-    438["Segment<br>[497, 550, 4]"]
-    439["Segment<br>[558, 612, 4]"]
-    440["Segment<br>[620, 645, 4]"]
-    441["Segment<br>[653, 673, 4]"]
-    442["Segment<br>[681, 705, 4]"]
-    443["Segment<br>[713, 766, 4]"]
-    444["Segment<br>[774, 799, 4]"]
-    445["Segment<br>[807, 827, 4]"]
-    446["Segment<br>[835, 859, 4]"]
-    447["Segment<br>[867, 919, 4]"]
-    448["Segment<br>[927, 979, 4]"]
-    449["Segment<br>[987, 1012, 4]"]
-    450["Segment<br>[1020, 1044, 4]"]
-    451["Segment<br>[1052, 1105, 4]"]
-    452["Segment<br>[1113, 1138, 4]"]
-    453["Segment<br>[1146, 1173, 4]"]
-    454["Segment<br>[1181, 1233, 4]"]
-    455["Segment<br>[1241, 1276, 4]"]
-    456["Segment<br>[1284, 1291, 4]"]
+    435["Path<br>[361, 394, 5]"]
+    436["Segment<br>[402, 428, 5]"]
+    437["Segment<br>[436, 489, 5]"]
+    438["Segment<br>[497, 550, 5]"]
+    439["Segment<br>[558, 612, 5]"]
+    440["Segment<br>[620, 645, 5]"]
+    441["Segment<br>[653, 673, 5]"]
+    442["Segment<br>[681, 705, 5]"]
+    443["Segment<br>[713, 766, 5]"]
+    444["Segment<br>[774, 799, 5]"]
+    445["Segment<br>[807, 827, 5]"]
+    446["Segment<br>[835, 859, 5]"]
+    447["Segment<br>[867, 919, 5]"]
+    448["Segment<br>[927, 979, 5]"]
+    449["Segment<br>[987, 1012, 5]"]
+    450["Segment<br>[1020, 1044, 5]"]
+    451["Segment<br>[1052, 1105, 5]"]
+    452["Segment<br>[1113, 1138, 5]"]
+    453["Segment<br>[1146, 1173, 5]"]
+    454["Segment<br>[1181, 1233, 5]"]
+    455["Segment<br>[1241, 1276, 5]"]
+    456["Segment<br>[1284, 1291, 5]"]
     457[Solid2d]
   end
   subgraph path522 [Path]
-    522["Path<br>[1685, 1709, 4]"]
+    522["Path<br>[1685, 1709, 5]"]
   end
   subgraph path523 [Path]
-    523["Path<br>[1717, 1847, 4]"]
-    524["Segment<br>[1717, 1847, 4]"]
-    525["Segment<br>[1717, 1847, 4]"]
-    526["Segment<br>[1717, 1847, 4]"]
-    527["Segment<br>[1717, 1847, 4]"]
-    528["Segment<br>[1717, 1847, 4]"]
-    529["Segment<br>[1717, 1847, 4]"]
-    530["Segment<br>[1717, 1847, 4]"]
+    523["Path<br>[1717, 1847, 5]"]
+    524["Segment<br>[1717, 1847, 5]"]
+    525["Segment<br>[1717, 1847, 5]"]
+    526["Segment<br>[1717, 1847, 5]"]
+    527["Segment<br>[1717, 1847, 5]"]
+    528["Segment<br>[1717, 1847, 5]"]
+    529["Segment<br>[1717, 1847, 5]"]
+    530["Segment<br>[1717, 1847, 5]"]
     531[Solid2d]
   end
   subgraph path553 [Path]
-    553["Path<br>[1685, 1709, 4]"]
+    553["Path<br>[1685, 1709, 5]"]
   end
   subgraph path554 [Path]
-    554["Path<br>[1717, 1847, 4]"]
-    555["Segment<br>[1717, 1847, 4]"]
-    556["Segment<br>[1717, 1847, 4]"]
-    557["Segment<br>[1717, 1847, 4]"]
-    558["Segment<br>[1717, 1847, 4]"]
-    559["Segment<br>[1717, 1847, 4]"]
-    560["Segment<br>[1717, 1847, 4]"]
-    561["Segment<br>[1717, 1847, 4]"]
+    554["Path<br>[1717, 1847, 5]"]
+    555["Segment<br>[1717, 1847, 5]"]
+    556["Segment<br>[1717, 1847, 5]"]
+    557["Segment<br>[1717, 1847, 5]"]
+    558["Segment<br>[1717, 1847, 5]"]
+    559["Segment<br>[1717, 1847, 5]"]
+    560["Segment<br>[1717, 1847, 5]"]
+    561["Segment<br>[1717, 1847, 5]"]
     562[Solid2d]
   end
   subgraph path585 [Path]
-    585["Path<br>[2123, 2150, 4]"]
-    586["Segment<br>[2158, 2180, 4]"]
-    587["Segment<br>[2188, 2210, 4]"]
-    588["Segment<br>[2218, 2240, 4]"]
-    589["Segment<br>[2248, 2271, 4]"]
-    590["Segment<br>[2279, 2302, 4]"]
-    591["Segment<br>[2310, 2345, 4]"]
-    592["Segment<br>[2353, 2360, 4]"]
+    585["Path<br>[2123, 2150, 5]"]
+    586["Segment<br>[2158, 2180, 5]"]
+    587["Segment<br>[2188, 2210, 5]"]
+    588["Segment<br>[2218, 2240, 5]"]
+    589["Segment<br>[2248, 2271, 5]"]
+    590["Segment<br>[2279, 2302, 5]"]
+    591["Segment<br>[2310, 2345, 5]"]
+    592["Segment<br>[2353, 2360, 5]"]
     593[Solid2d]
   end
   subgraph path618 [Path]
-    618["Path<br>[2632, 2661, 4]"]
-    619["Segment<br>[2669, 2692, 4]"]
-    620["Segment<br>[2700, 2725, 4]"]
-    621["Segment<br>[2733, 2757, 4]"]
-    622["Segment<br>[2765, 2789, 4]"]
-    623["Segment<br>[2797, 2819, 4]"]
-    624["Segment<br>[2827, 2862, 4]"]
-    625["Segment<br>[2870, 2877, 4]"]
+    618["Path<br>[2632, 2661, 5]"]
+    619["Segment<br>[2669, 2692, 5]"]
+    620["Segment<br>[2700, 2725, 5]"]
+    621["Segment<br>[2733, 2757, 5]"]
+    622["Segment<br>[2765, 2789, 5]"]
+    623["Segment<br>[2797, 2819, 5]"]
+    624["Segment<br>[2827, 2862, 5]"]
+    625["Segment<br>[2870, 2877, 5]"]
     626[Solid2d]
   end
   subgraph path650 [Path]
-    650["Path<br>[3152, 3179, 4]"]
-    651["Segment<br>[3187, 3206, 4]"]
-    652["Segment<br>[3214, 3304, 4]"]
+    650["Path<br>[3152, 3179, 5]"]
+    651["Segment<br>[3187, 3206, 5]"]
+    652["Segment<br>[3214, 3304, 5]"]
   end
   subgraph path654 [Path]
-    654["Path<br>[3404, 3437, 4]"]
-    655["Segment<br>[3445, 3464, 4]"]
-    656["Segment<br>[3472, 3494, 4]"]
-    657["Segment<br>[3502, 3525, 4]"]
-    658["Segment<br>[3533, 3553, 4]"]
-    659["Segment<br>[3561, 3585, 4]"]
-    660["Segment<br>[3593, 3616, 4]"]
-    661["Segment<br>[3624, 3631, 4]"]
+    654["Path<br>[3404, 3437, 5]"]
+    655["Segment<br>[3445, 3464, 5]"]
+    656["Segment<br>[3472, 3494, 5]"]
+    657["Segment<br>[3502, 3525, 5]"]
+    658["Segment<br>[3533, 3553, 5]"]
+    659["Segment<br>[3561, 3585, 5]"]
+    660["Segment<br>[3593, 3616, 5]"]
+    661["Segment<br>[3624, 3631, 5]"]
     662[Solid2d]
   end
   subgraph path688 [Path]
-    688["Path<br>[3152, 3179, 4]"]
-    689["Segment<br>[3187, 3206, 4]"]
-    690["Segment<br>[3214, 3304, 4]"]
+    688["Path<br>[3152, 3179, 5]"]
+    689["Segment<br>[3187, 3206, 5]"]
+    690["Segment<br>[3214, 3304, 5]"]
   end
   subgraph path692 [Path]
-    692["Path<br>[3404, 3437, 4]"]
-    693["Segment<br>[3445, 3464, 4]"]
-    694["Segment<br>[3472, 3494, 4]"]
-    695["Segment<br>[3502, 3525, 4]"]
-    696["Segment<br>[3533, 3553, 4]"]
-    697["Segment<br>[3561, 3585, 4]"]
-    698["Segment<br>[3593, 3616, 4]"]
-    699["Segment<br>[3624, 3631, 4]"]
+    692["Path<br>[3404, 3437, 5]"]
+    693["Segment<br>[3445, 3464, 5]"]
+    694["Segment<br>[3472, 3494, 5]"]
+    695["Segment<br>[3502, 3525, 5]"]
+    696["Segment<br>[3533, 3553, 5]"]
+    697["Segment<br>[3561, 3585, 5]"]
+    698["Segment<br>[3593, 3616, 5]"]
+    699["Segment<br>[3624, 3631, 5]"]
     700[Solid2d]
   end
-  1["Plane<br>[333, 353, 4]"]
-  25["Sweep Extrusion<br>[1379, 1417, 4]"]
+  1["Plane<br>[333, 353, 5]"]
+  25["Sweep Extrusion<br>[1379, 1417, 5]"]
   26[Wall]
   27[Wall]
   28[Wall]
@@ -296,8 +296,8 @@ flowchart LR
   85["SweepEdge Adjacent"]
   86["SweepEdge Opposite"]
   87["SweepEdge Adjacent"]
-  88["Plane<br>[333, 353, 4]"]
-  112["Sweep Extrusion<br>[1455, 1494, 4]"]
+  88["Plane<br>[333, 353, 5]"]
+  112["Sweep Extrusion<br>[1455, 1494, 5]"]
   113[Wall]
   114[Wall]
   115[Wall]
@@ -361,7 +361,7 @@ flowchart LR
   173["SweepEdge Opposite"]
   174["SweepEdge Adjacent"]
   175["Plane<br>[823, 865, 0]"]
-  199["Sweep Extrusion<br>[1379, 1417, 4]"]
+  199["Sweep Extrusion<br>[1379, 1417, 5]"]
   200[Wall]
   201[Wall]
   202[Wall]
@@ -424,7 +424,7 @@ flowchart LR
   259["SweepEdge Adjacent"]
   260["SweepEdge Opposite"]
   261["SweepEdge Adjacent"]
-  285["Sweep Extrusion<br>[1455, 1494, 4]"]
+  285["Sweep Extrusion<br>[1455, 1494, 5]"]
   286[Wall]
   287[Wall]
   288[Wall]
@@ -488,7 +488,7 @@ flowchart LR
   346["SweepEdge Opposite"]
   347["SweepEdge Adjacent"]
   348["Plane<br>[875, 916, 0]"]
-  372["Sweep Extrusion<br>[1379, 1417, 4]"]
+  372["Sweep Extrusion<br>[1379, 1417, 5]"]
   373[Wall]
   374[Wall]
   375[Wall]
@@ -551,7 +551,7 @@ flowchart LR
   432["SweepEdge Adjacent"]
   433["SweepEdge Opposite"]
   434["SweepEdge Adjacent"]
-  458["Sweep Extrusion<br>[1455, 1494, 4]"]
+  458["Sweep Extrusion<br>[1455, 1494, 5]"]
   459[Wall]
   460[Wall]
   461[Wall]
@@ -615,7 +615,7 @@ flowchart LR
   519["SweepEdge Opposite"]
   520["SweepEdge Adjacent"]
   521["Plane<br>[975, 1017, 0]"]
-  532["Sweep Extrusion<br>[1949, 1973, 4]"]
+  532["Sweep Extrusion<br>[1949, 1973, 5]"]
   533[Wall]
   534[Wall]
   535[Wall]
@@ -636,7 +636,7 @@ flowchart LR
   550["SweepEdge Adjacent"]
   551["SweepEdge Opposite"]
   552["SweepEdge Adjacent"]
-  563["Sweep Extrusion<br>[2015, 2039, 4]"]
+  563["Sweep Extrusion<br>[2015, 2039, 5]"]
   564[Wall]
   565[Wall]
   566[Wall]
@@ -658,7 +658,7 @@ flowchart LR
   582["SweepEdge Opposite"]
   583["SweepEdge Adjacent"]
   584["Plane<br>[1068, 1135, 0]"]
-  594["Sweep Extrusion<br>[2523, 2547, 4]"]
+  594["Sweep Extrusion<br>[2523, 2547, 5]"]
   595[Wall]
   596[Wall]
   597[Wall]
@@ -679,10 +679,10 @@ flowchart LR
   612["SweepEdge Adjacent"]
   613["SweepEdge Opposite"]
   614["SweepEdge Adjacent"]
-  615["Sweep Extrusion<br>[2523, 2547, 4]"]
-  616["Sweep Extrusion<br>[2523, 2547, 4]"]
+  615["Sweep Extrusion<br>[2523, 2547, 5]"]
+  616["Sweep Extrusion<br>[2523, 2547, 5]"]
   617["Plane<br>[1205, 1272, 0]"]
-  627["Sweep Extrusion<br>[3047, 3071, 4]"]
+  627["Sweep Extrusion<br>[3047, 3071, 5]"]
   628[Wall]
   629[Wall]
   630[Wall]
@@ -703,10 +703,10 @@ flowchart LR
   645["SweepEdge Adjacent"]
   646["SweepEdge Opposite"]
   647["SweepEdge Adjacent"]
-  648["Sweep Extrusion<br>[3047, 3071, 4]"]
-  649["Plane<br>[3712, 3747, 4]"]
-  653["Plane<br>[3778, 3807, 4]"]
-  663["Sweep Sweep<br>[3819, 3846, 4]"]
+  648["Sweep Extrusion<br>[3047, 3071, 5]"]
+  649["Plane<br>[3712, 3747, 5]"]
+  653["Plane<br>[3778, 3807, 5]"]
+  663["Sweep Sweep<br>[3819, 3846, 5]"]
   664[Wall]
   665[Wall]
   666[Wall]
@@ -730,9 +730,9 @@ flowchart LR
   684["SweepEdge Adjacent"]
   685["SweepEdge Opposite"]
   686["SweepEdge Adjacent"]
-  687["Plane<br>[3712, 3747, 4]"]
-  691["Plane<br>[3778, 3807, 4]"]
-  701["Sweep Sweep<br>[3819, 3846, 4]"]
+  687["Plane<br>[3712, 3747, 5]"]
+  691["Plane<br>[3778, 3807, 5]"]
+  701["Sweep Sweep<br>[3819, 3846, 5]"]
   702[Wall]
   703[Wall]
   704[Wall]
@@ -756,18 +756,18 @@ flowchart LR
   722["SweepEdge Adjacent"]
   723["SweepEdge Opposite"]
   724["SweepEdge Adjacent"]
-  725["StartSketchOnPlane<br>[333, 353, 4]"]
-  726["StartSketchOnPlane<br>[333, 353, 4]"]
-  727["StartSketchOnPlane<br>[333, 353, 4]"]
-  728["StartSketchOnPlane<br>[333, 353, 4]"]
-  729["StartSketchOnPlane<br>[1657, 1677, 4]"]
-  730["StartSketchOnPlane<br>[1657, 1677, 4]"]
-  731["StartSketchOnPlane<br>[2095, 2115, 4]"]
-  732["StartSketchOnPlane<br>[2604, 2624, 4]"]
-  733["StartSketchOnPlane<br>[3124, 3144, 4]"]
-  734["StartSketchOnPlane<br>[3376, 3396, 4]"]
-  735["StartSketchOnPlane<br>[3124, 3144, 4]"]
-  736["StartSketchOnPlane<br>[3376, 3396, 4]"]
+  725["StartSketchOnPlane<br>[333, 353, 5]"]
+  726["StartSketchOnPlane<br>[333, 353, 5]"]
+  727["StartSketchOnPlane<br>[333, 353, 5]"]
+  728["StartSketchOnPlane<br>[333, 353, 5]"]
+  729["StartSketchOnPlane<br>[1657, 1677, 5]"]
+  730["StartSketchOnPlane<br>[1657, 1677, 5]"]
+  731["StartSketchOnPlane<br>[2095, 2115, 5]"]
+  732["StartSketchOnPlane<br>[2604, 2624, 5]"]
+  733["StartSketchOnPlane<br>[3124, 3144, 5]"]
+  734["StartSketchOnPlane<br>[3376, 3396, 5]"]
+  735["StartSketchOnPlane<br>[3124, 3144, 5]"]
+  736["StartSketchOnPlane<br>[3376, 3396, 5]"]
   1 --- 2
   2 --- 3
   2 --- 4

rust/kcl-lib/tests/kcl_samples/bench/ops.snap

@@ -9,7 +9,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       1331,
       1606,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -21,7 +21,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       309,
       1312,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -77,7 +77,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       309,
       1312,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -248,7 +248,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       1331,
       1606,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -260,7 +260,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       309,
       1312,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -316,7 +316,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       309,
       1312,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -487,7 +487,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       1331,
       1606,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -499,7 +499,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       309,
       1312,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -555,7 +555,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       309,
       1312,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -726,7 +726,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       1889,
       2052,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -738,7 +738,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       1626,
       1868,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -800,7 +800,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       1626,
       1868,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -889,7 +889,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       2474,
       2560,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -901,7 +901,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       2071,
       2453,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -1007,7 +1007,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       2993,
       3084,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -1019,7 +1019,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       2580,
       2972,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -1095,7 +1095,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       3671,
       3859,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -1131,7 +1131,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       3100,
       3325,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -1191,7 +1191,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       3344,
       3652,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -1249,7 +1249,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       3671,
       3859,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -1285,7 +1285,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       3100,
       3325,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},
@@ -1345,7 +1345,7 @@ description: Operations executed bench.kcl
     "functionSourceRange": [
       3344,
       3652,
-      4
+      5
     ],
     "unlabeledArg": null,
     "labeledArgs": {},

rust/kcl-lib/tests/kcl_samples/car-wheel-assembly/artifact_graph_flowchart.snap.md

@@ -1,264 +1,264 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[567, 618, 5]"]
-    3["Segment<br>[567, 618, 5]"]
+    2["Path<br>[567, 618, 6]"]
+    3["Segment<br>[567, 618, 6]"]
     4[Solid2d]
   end
   subgraph path11 [Path]
-    11["Path<br>[803, 859, 5]"]
-    12["Segment<br>[803, 859, 5]"]
+    11["Path<br>[803, 859, 6]"]
+    12["Segment<br>[803, 859, 6]"]
     13[Solid2d]
   end
   subgraph path19 [Path]
-    19["Path<br>[984, 1037, 5]"]
-    20["Segment<br>[984, 1037, 5]"]
+    19["Path<br>[984, 1037, 6]"]
+    20["Segment<br>[984, 1037, 6]"]
     21[Solid2d]
   end
   subgraph path30 [Path]
-    30["Path<br>[1420, 1460, 5]"]
-    31["Segment<br>[1420, 1460, 5]"]
+    30["Path<br>[1420, 1460, 6]"]
+    31["Segment<br>[1420, 1460, 6]"]
     32[Solid2d]
   end
   subgraph path38 [Path]
-    38["Path<br>[1564, 1615, 5]"]
-    39["Segment<br>[1564, 1615, 5]"]
+    38["Path<br>[1564, 1615, 6]"]
+    39["Segment<br>[1564, 1615, 6]"]
     40[Solid2d]
   end
   subgraph path47 [Path]
-    47["Path<br>[1748, 1801, 5]"]
-    48["Segment<br>[1748, 1801, 5]"]
+    47["Path<br>[1748, 1801, 6]"]
+    48["Segment<br>[1748, 1801, 6]"]
     49[Solid2d]
   end
   subgraph path58 [Path]
-    58["Path<br>[2044, 2116, 5]"]
-    59["Segment<br>[2044, 2116, 5]"]
+    58["Path<br>[2044, 2116, 6]"]
+    59["Segment<br>[2044, 2116, 6]"]
     60[Solid2d]
   end
   subgraph path81 [Path]
-    81["Path<br>[2373, 2404, 5]"]
-    82["Segment<br>[2410, 2430, 5]"]
-    83["Segment<br>[2436, 2456, 5]"]
-    84["Segment<br>[2462, 2483, 5]"]
-    85["Segment<br>[2489, 2545, 5]"]
-    86["Segment<br>[2551, 2558, 5]"]
+    81["Path<br>[2373, 2404, 6]"]
+    82["Segment<br>[2410, 2430, 6]"]
+    83["Segment<br>[2436, 2456, 6]"]
+    84["Segment<br>[2462, 2483, 6]"]
+    85["Segment<br>[2489, 2545, 6]"]
+    86["Segment<br>[2551, 2558, 6]"]
     87[Solid2d]
   end
   subgraph path106 [Path]
-    106["Path<br>[2860, 2892, 5]"]
-    107["Segment<br>[2898, 2919, 5]"]
-    108["Segment<br>[2925, 2945, 5]"]
-    109["Segment<br>[2951, 2971, 5]"]
-    110["Segment<br>[2977, 3033, 5]"]
-    111["Segment<br>[3039, 3046, 5]"]
+    106["Path<br>[2860, 2892, 6]"]
+    107["Segment<br>[2898, 2919, 6]"]
+    108["Segment<br>[2925, 2945, 6]"]
+    109["Segment<br>[2951, 2971, 6]"]
+    110["Segment<br>[2977, 3033, 6]"]
+    111["Segment<br>[3039, 3046, 6]"]
     112[Solid2d]
   end
   subgraph path132 [Path]
-    132["Path<br>[350, 406, 4]"]
-    133["Segment<br>[350, 406, 4]"]
+    132["Path<br>[350, 406, 5]"]
+    133["Segment<br>[350, 406, 5]"]
     134[Solid2d]
   end
   subgraph path135 [Path]
-    135["Path<br>[417, 473, 4]"]
-    136["Segment<br>[417, 473, 4]"]
+    135["Path<br>[417, 473, 5]"]
+    136["Segment<br>[417, 473, 5]"]
     137[Solid2d]
   end
   subgraph path144 [Path]
-    144["Path<br>[638, 694, 4]"]
-    145["Segment<br>[638, 694, 4]"]
+    144["Path<br>[638, 694, 5]"]
+    145["Segment<br>[638, 694, 5]"]
     146[Solid2d]
   end
   subgraph path147 [Path]
-    147["Path<br>[705, 761, 4]"]
-    148["Segment<br>[705, 761, 4]"]
+    147["Path<br>[705, 761, 5]"]
+    148["Segment<br>[705, 761, 5]"]
     149[Solid2d]
   end
   subgraph path156 [Path]
-    156["Path<br>[905, 959, 4]"]
-    157["Segment<br>[905, 959, 4]"]
+    156["Path<br>[905, 959, 5]"]
+    157["Segment<br>[905, 959, 5]"]
     158[Solid2d]
   end
   subgraph path167 [Path]
-    167["Path<br>[1237, 1297, 4]"]
-    168["Segment<br>[1237, 1297, 4]"]
+    167["Path<br>[1237, 1297, 5]"]
+    168["Segment<br>[1237, 1297, 5]"]
     169[Solid2d]
   end
   subgraph path179 [Path]
-    179["Path<br>[1655, 1701, 4]"]
-    180["Segment<br>[1707, 1759, 4]"]
-    181["Segment<br>[1765, 1870, 4]"]
-    182["Segment<br>[1876, 1898, 4]"]
-    183["Segment<br>[1904, 1960, 4]"]
-    184["Segment<br>[1966, 1973, 4]"]
+    179["Path<br>[1655, 1701, 5]"]
+    180["Segment<br>[1707, 1759, 5]"]
+    181["Segment<br>[1765, 1870, 5]"]
+    182["Segment<br>[1876, 1898, 5]"]
+    183["Segment<br>[1904, 1960, 5]"]
+    184["Segment<br>[1966, 1973, 5]"]
     185[Solid2d]
   end
   subgraph path195 [Path]
-    195["Path<br>[2107, 2153, 4]"]
-    196["Segment<br>[2159, 2211, 4]"]
-    197["Segment<br>[2217, 2324, 4]"]
-    198["Segment<br>[2330, 2367, 4]"]
-    199["Segment<br>[2373, 2429, 4]"]
-    200["Segment<br>[2435, 2442, 4]"]
+    195["Path<br>[2105, 2151, 5]"]
+    196["Segment<br>[2157, 2209, 5]"]
+    197["Segment<br>[2215, 2322, 5]"]
+    198["Segment<br>[2328, 2365, 5]"]
+    199["Segment<br>[2371, 2427, 5]"]
+    200["Segment<br>[2433, 2440, 5]"]
     201[Solid2d]
   end
   subgraph path212 [Path]
-    212["Path<br>[2953, 3000, 4]"]
-    213["Segment<br>[3008, 3348, 4]"]
-    214["Segment<br>[3356, 3388, 4]"]
-    215["Segment<br>[3396, 3740, 4]"]
-    216["Segment<br>[3748, 3804, 4]"]
-    217["Segment<br>[3812, 3819, 4]"]
+    212["Path<br>[2949, 2996, 5]"]
+    213["Segment<br>[3004, 3344, 5]"]
+    214["Segment<br>[3352, 3384, 5]"]
+    215["Segment<br>[3392, 3736, 5]"]
+    216["Segment<br>[3744, 3800, 5]"]
+    217["Segment<br>[3808, 3815, 5]"]
     218[Solid2d]
   end
   subgraph path235 [Path]
-    235["Path<br>[2953, 3000, 4]"]
-    236["Segment<br>[3008, 3348, 4]"]
-    237["Segment<br>[3356, 3388, 4]"]
-    238["Segment<br>[3396, 3740, 4]"]
-    239["Segment<br>[3748, 3804, 4]"]
-    240["Segment<br>[3812, 3819, 4]"]
+    235["Path<br>[2949, 2996, 5]"]
+    236["Segment<br>[3004, 3344, 5]"]
+    237["Segment<br>[3352, 3384, 5]"]
+    238["Segment<br>[3392, 3736, 5]"]
+    239["Segment<br>[3744, 3800, 5]"]
+    240["Segment<br>[3808, 3815, 5]"]
     241[Solid2d]
   end
   subgraph path258 [Path]
-    258["Path<br>[4347, 4442, 4]"]
-    259["Segment<br>[4448, 4481, 4]"]
-    260["Segment<br>[4487, 4538, 4]"]
-    261["Segment<br>[4544, 4577, 4]"]
-    262["Segment<br>[4583, 4633, 4]"]
-    263["Segment<br>[4639, 4680, 4]"]
-    264["Segment<br>[4686, 4735, 4]"]
-    265["Segment<br>[4741, 4774, 4]"]
-    266["Segment<br>[4780, 4814, 4]"]
-    267["Segment<br>[4820, 4854, 4]"]
-    268["Segment<br>[4860, 4912, 4]"]
-    269["Segment<br>[4918, 4952, 4]"]
-    270["Segment<br>[4958, 5034, 4]"]
-    271["Segment<br>[5040, 5073, 4]"]
-    272["Segment<br>[5079, 5155, 4]"]
-    273["Segment<br>[5161, 5195, 4]"]
-    274["Segment<br>[5201, 5275, 4]"]
-    275["Segment<br>[5281, 5315, 4]"]
-    276["Segment<br>[5321, 5372, 4]"]
-    277["Segment<br>[5378, 5440, 4]"]
-    278["Segment<br>[5446, 5497, 4]"]
-    279["Segment<br>[5503, 5537, 4]"]
-    280["Segment<br>[5543, 5576, 4]"]
-    281["Segment<br>[5582, 5615, 4]"]
-    282["Segment<br>[5621, 5628, 4]"]
+    258["Path<br>[4343, 4438, 5]"]
+    259["Segment<br>[4444, 4477, 5]"]
+    260["Segment<br>[4483, 4534, 5]"]
+    261["Segment<br>[4540, 4573, 5]"]
+    262["Segment<br>[4579, 4629, 5]"]
+    263["Segment<br>[4635, 4676, 5]"]
+    264["Segment<br>[4682, 4731, 5]"]
+    265["Segment<br>[4737, 4770, 5]"]
+    266["Segment<br>[4776, 4810, 5]"]
+    267["Segment<br>[4816, 4850, 5]"]
+    268["Segment<br>[4856, 4908, 5]"]
+    269["Segment<br>[4914, 4948, 5]"]
+    270["Segment<br>[4954, 5030, 5]"]
+    271["Segment<br>[5036, 5069, 5]"]
+    272["Segment<br>[5075, 5151, 5]"]
+    273["Segment<br>[5157, 5191, 5]"]
+    274["Segment<br>[5197, 5271, 5]"]
+    275["Segment<br>[5277, 5311, 5]"]
+    276["Segment<br>[5317, 5368, 5]"]
+    277["Segment<br>[5374, 5436, 5]"]
+    278["Segment<br>[5442, 5493, 5]"]
+    279["Segment<br>[5499, 5533, 5]"]
+    280["Segment<br>[5539, 5572, 5]"]
+    281["Segment<br>[5578, 5611, 5]"]
+    282["Segment<br>[5617, 5624, 5]"]
     283[Solid2d]
   end
   subgraph path334 [Path]
-    334["Path<br>[740, 780, 7]"]
-    335["Segment<br>[788, 850, 7]"]
-    336["Segment<br>[858, 894, 7]"]
-    337["Segment<br>[902, 932, 7]"]
-    338["Segment<br>[940, 992, 7]"]
-    339["Segment<br>[1000, 1040, 7]"]
-    340["Segment<br>[1048, 1083, 7]"]
-    341["Segment<br>[1091, 1129, 7]"]
-    342["Segment<br>[1137, 1159, 7]"]
-    343["Segment<br>[1167, 1174, 7]"]
+    334["Path<br>[740, 780, 8]"]
+    335["Segment<br>[788, 850, 8]"]
+    336["Segment<br>[858, 894, 8]"]
+    337["Segment<br>[902, 932, 8]"]
+    338["Segment<br>[940, 992, 8]"]
+    339["Segment<br>[1000, 1040, 8]"]
+    340["Segment<br>[1048, 1083, 8]"]
+    341["Segment<br>[1091, 1129, 8]"]
+    342["Segment<br>[1137, 1159, 8]"]
+    343["Segment<br>[1167, 1174, 8]"]
     344[Solid2d]
   end
   subgraph path365 [Path]
-    365["Path<br>[507, 588, 6]"]
-    366["Segment<br>[594, 695, 6]"]
-    367["Segment<br>[701, 786, 6]"]
-    368["Segment<br>[792, 876, 6]"]
-    369["Segment<br>[882, 968, 6]"]
-    370["Segment<br>[974, 1059, 6]"]
-    371["Segment<br>[1065, 1151, 6]"]
-    372["Segment<br>[1157, 1280, 6]"]
-    373["Segment<br>[1286, 1372, 6]"]
-    374["Segment<br>[1378, 1513, 6]"]
-    375["Segment<br>[1519, 1605, 6]"]
-    376["Segment<br>[1611, 1735, 6]"]
-    377["Segment<br>[1741, 1827, 6]"]
-    378["Segment<br>[1833, 1918, 6]"]
-    379["Segment<br>[1924, 2010, 6]"]
-    380["Segment<br>[2016, 2101, 6]"]
-    381["Segment<br>[2107, 2192, 6]"]
-    382["Segment<br>[2198, 2205, 6]"]
+    365["Path<br>[507, 588, 7]"]
+    366["Segment<br>[594, 695, 7]"]
+    367["Segment<br>[701, 786, 7]"]
+    368["Segment<br>[792, 876, 7]"]
+    369["Segment<br>[882, 968, 7]"]
+    370["Segment<br>[974, 1059, 7]"]
+    371["Segment<br>[1065, 1151, 7]"]
+    372["Segment<br>[1157, 1280, 7]"]
+    373["Segment<br>[1286, 1372, 7]"]
+    374["Segment<br>[1378, 1513, 7]"]
+    375["Segment<br>[1519, 1605, 7]"]
+    376["Segment<br>[1611, 1735, 7]"]
+    377["Segment<br>[1741, 1827, 7]"]
+    378["Segment<br>[1833, 1918, 7]"]
+    379["Segment<br>[1924, 2010, 7]"]
+    380["Segment<br>[2016, 2101, 7]"]
+    381["Segment<br>[2107, 2192, 7]"]
+    382["Segment<br>[2198, 2205, 7]"]
     383[Solid2d]
   end
   subgraph path439 [Path]
-    439["Path<br>[483, 540, 8]"]
-    440["Segment<br>[546, 680, 8]"]
-    441["Segment<br>[686, 741, 8]"]
-    442["Segment<br>[747, 844, 8]"]
-    443["Segment<br>[850, 882, 8]"]
-    444["Segment<br>[888, 920, 8]"]
-    445["Segment<br>[926, 957, 8]"]
-    446["Segment<br>[963, 1078, 8]"]
-    447["Segment<br>[1084, 1116, 8]"]
-    448["Segment<br>[1122, 1154, 8]"]
-    449["Segment<br>[1160, 1191, 8]"]
-    450["Segment<br>[1197, 1290, 8]"]
-    451["Segment<br>[1296, 1351, 8]"]
-    452["Segment<br>[1357, 1430, 8]"]
-    453["Segment<br>[1436, 1443, 8]"]
+    439["Path<br>[483, 540, 9]"]
+    440["Segment<br>[546, 680, 9]"]
+    441["Segment<br>[686, 741, 9]"]
+    442["Segment<br>[747, 844, 9]"]
+    443["Segment<br>[850, 882, 9]"]
+    444["Segment<br>[888, 920, 9]"]
+    445["Segment<br>[926, 957, 9]"]
+    446["Segment<br>[963, 1078, 9]"]
+    447["Segment<br>[1084, 1116, 9]"]
+    448["Segment<br>[1122, 1154, 9]"]
+    449["Segment<br>[1160, 1191, 9]"]
+    450["Segment<br>[1197, 1290, 9]"]
+    451["Segment<br>[1296, 1351, 9]"]
+    452["Segment<br>[1357, 1430, 9]"]
+    453["Segment<br>[1436, 1443, 9]"]
     454[Solid2d]
   end
-  1["Plane<br>[544, 561, 5]"]
-  5["Sweep Extrusion<br>[627, 683, 5]"]
+  1["Plane<br>[544, 561, 6]"]
+  5["Sweep Extrusion<br>[627, 683, 6]"]
   6[Wall]
   7["Cap Start"]
   8["Cap End"]
   9["SweepEdge Opposite"]
   10["SweepEdge Adjacent"]
-  14["Sweep Extrusion<br>[872, 934, 5]"]
+  14["Sweep Extrusion<br>[872, 934, 6]"]
   15[Wall]
   16["Cap End"]
   17["SweepEdge Opposite"]
   18["SweepEdge Adjacent"]
-  22["Sweep Extrusion<br>[1184, 1263, 5]"]
+  22["Sweep Extrusion<br>[1184, 1263, 6]"]
   23[Wall]
   24["SweepEdge Opposite"]
   25["SweepEdge Adjacent"]
-  26["Sweep Extrusion<br>[1184, 1263, 5]"]
-  27["Sweep Extrusion<br>[1184, 1263, 5]"]
-  28["Sweep Extrusion<br>[1184, 1263, 5]"]
-  29["Sweep Extrusion<br>[1184, 1263, 5]"]
-  33["Sweep Extrusion<br>[1466, 1499, 5]"]
+  26["Sweep Extrusion<br>[1184, 1263, 6]"]
+  27["Sweep Extrusion<br>[1184, 1263, 6]"]
+  28["Sweep Extrusion<br>[1184, 1263, 6]"]
+  29["Sweep Extrusion<br>[1184, 1263, 6]"]
+  33["Sweep Extrusion<br>[1466, 1499, 6]"]
   34[Wall]
   35["Cap End"]
   36["SweepEdge Opposite"]
   37["SweepEdge Adjacent"]
-  41["Sweep Extrusion<br>[1630, 1695, 5]"]
+  41["Sweep Extrusion<br>[1630, 1695, 6]"]
   42[Wall]
   43["Cap Start"]
   44["Cap End"]
   45["SweepEdge Opposite"]
   46["SweepEdge Adjacent"]
-  50["Sweep Extrusion<br>[1948, 1992, 5]"]
+  50["Sweep Extrusion<br>[1948, 1992, 6]"]
   51[Wall]
   52["SweepEdge Opposite"]
   53["SweepEdge Adjacent"]
-  54["Sweep Extrusion<br>[1948, 1992, 5]"]
-  55["Sweep Extrusion<br>[1948, 1992, 5]"]
-  56["Sweep Extrusion<br>[1948, 1992, 5]"]
-  57["Sweep Extrusion<br>[1948, 1992, 5]"]
-  61["Sweep Extrusion<br>[2271, 2315, 5]"]
+  54["Sweep Extrusion<br>[1948, 1992, 6]"]
+  55["Sweep Extrusion<br>[1948, 1992, 6]"]
+  56["Sweep Extrusion<br>[1948, 1992, 6]"]
+  57["Sweep Extrusion<br>[1948, 1992, 6]"]
+  61["Sweep Extrusion<br>[2271, 2315, 6]"]
   62[Wall]
   63["Cap End"]
   64["SweepEdge Opposite"]
   65["SweepEdge Adjacent"]
-  66["Sweep Extrusion<br>[2271, 2315, 5]"]
-  67["Sweep Extrusion<br>[2271, 2315, 5]"]
-  68["Sweep Extrusion<br>[2271, 2315, 5]"]
-  69["Sweep Extrusion<br>[2271, 2315, 5]"]
-  70["Sweep Extrusion<br>[2271, 2315, 5]"]
-  71["Sweep Extrusion<br>[2271, 2315, 5]"]
-  72["Sweep Extrusion<br>[2271, 2315, 5]"]
-  73["Sweep Extrusion<br>[2271, 2315, 5]"]
-  74["Sweep Extrusion<br>[2271, 2315, 5]"]
-  75["Sweep Extrusion<br>[2271, 2315, 5]"]
-  76["Sweep Extrusion<br>[2271, 2315, 5]"]
-  77["Sweep Extrusion<br>[2271, 2315, 5]"]
-  78["Sweep Extrusion<br>[2271, 2315, 5]"]
-  79["Sweep Extrusion<br>[2271, 2315, 5]"]
-  80["Sweep Extrusion<br>[2271, 2315, 5]"]
-  88["Sweep Extrusion<br>[2724, 2792, 5]"]
+  66["Sweep Extrusion<br>[2271, 2315, 6]"]
+  67["Sweep Extrusion<br>[2271, 2315, 6]"]
+  68["Sweep Extrusion<br>[2271, 2315, 6]"]
+  69["Sweep Extrusion<br>[2271, 2315, 6]"]
+  70["Sweep Extrusion<br>[2271, 2315, 6]"]
+  71["Sweep Extrusion<br>[2271, 2315, 6]"]
+  72["Sweep Extrusion<br>[2271, 2315, 6]"]
+  73["Sweep Extrusion<br>[2271, 2315, 6]"]
+  74["Sweep Extrusion<br>[2271, 2315, 6]"]
+  75["Sweep Extrusion<br>[2271, 2315, 6]"]
+  76["Sweep Extrusion<br>[2271, 2315, 6]"]
+  77["Sweep Extrusion<br>[2271, 2315, 6]"]
+  78["Sweep Extrusion<br>[2271, 2315, 6]"]
+  79["Sweep Extrusion<br>[2271, 2315, 6]"]
+  80["Sweep Extrusion<br>[2271, 2315, 6]"]
+  88["Sweep Extrusion<br>[2724, 2792, 6]"]
   89[Wall]
   90[Wall]
   91[Wall]
@@ -272,11 +272,11 @@ flowchart LR
   99["SweepEdge Adjacent"]
   100["SweepEdge Opposite"]
   101["SweepEdge Adjacent"]
-  102["Sweep Extrusion<br>[2724, 2792, 5]"]
-  103["Sweep Extrusion<br>[2724, 2792, 5]"]
-  104["Sweep Extrusion<br>[2724, 2792, 5]"]
-  105["Sweep Extrusion<br>[2724, 2792, 5]"]
-  113["Sweep Extrusion<br>[3198, 3272, 5]"]
+  102["Sweep Extrusion<br>[2724, 2792, 6]"]
+  103["Sweep Extrusion<br>[2724, 2792, 6]"]
+  104["Sweep Extrusion<br>[2724, 2792, 6]"]
+  105["Sweep Extrusion<br>[2724, 2792, 6]"]
+  113["Sweep Extrusion<br>[3198, 3272, 6]"]
   114[Wall]
   115[Wall]
   116[Wall]
@@ -290,41 +290,41 @@ flowchart LR
   124["SweepEdge Adjacent"]
   125["SweepEdge Opposite"]
   126["SweepEdge Adjacent"]
-  127["Sweep Extrusion<br>[3198, 3272, 5]"]
-  128["Sweep Extrusion<br>[3198, 3272, 5]"]
-  129["Sweep Extrusion<br>[3198, 3272, 5]"]
-  130["Sweep Extrusion<br>[3198, 3272, 5]"]
-  131["Plane<br>[327, 344, 4]"]
-  138["Sweep Extrusion<br>[483, 516, 4]"]
+  127["Sweep Extrusion<br>[3198, 3272, 6]"]
+  128["Sweep Extrusion<br>[3198, 3272, 6]"]
+  129["Sweep Extrusion<br>[3198, 3272, 6]"]
+  130["Sweep Extrusion<br>[3198, 3272, 6]"]
+  131["Plane<br>[327, 344, 5]"]
+  138["Sweep Extrusion<br>[483, 516, 5]"]
   139[Wall]
   140["Cap Start"]
   141["Cap End"]
   142["SweepEdge Opposite"]
   143["SweepEdge Adjacent"]
-  150["Sweep Extrusion<br>[771, 804, 4]"]
+  150["Sweep Extrusion<br>[771, 804, 5]"]
   151[Wall]
   152["Cap Start"]
   153["Cap End"]
   154["SweepEdge Opposite"]
   155["SweepEdge Adjacent"]
-  159["Sweep Extrusion<br>[1106, 1140, 4]"]
+  159["Sweep Extrusion<br>[1106, 1140, 5]"]
   160[Wall]
   161["SweepEdge Opposite"]
   162["SweepEdge Adjacent"]
-  163["Sweep Extrusion<br>[1106, 1140, 4]"]
-  164["Sweep Extrusion<br>[1106, 1140, 4]"]
-  165["Sweep Extrusion<br>[1106, 1140, 4]"]
-  166["Sweep Extrusion<br>[1106, 1140, 4]"]
-  170["Sweep Extrusion<br>[1444, 1478, 4]"]
+  163["Sweep Extrusion<br>[1106, 1140, 5]"]
+  164["Sweep Extrusion<br>[1106, 1140, 5]"]
+  165["Sweep Extrusion<br>[1106, 1140, 5]"]
+  166["Sweep Extrusion<br>[1106, 1140, 5]"]
+  170["Sweep Extrusion<br>[1444, 1478, 5]"]
   171[Wall]
   172["SweepEdge Opposite"]
   173["SweepEdge Adjacent"]
-  174["Sweep Extrusion<br>[1444, 1478, 4]"]
-  175["Sweep Extrusion<br>[1444, 1478, 4]"]
-  176["Sweep Extrusion<br>[1444, 1478, 4]"]
-  177["Sweep Extrusion<br>[1444, 1478, 4]"]
-  178["Plane<br>[1632, 1649, 4]"]
-  186["Sweep Revolve<br>[1979, 1998, 4]"]
+  174["Sweep Extrusion<br>[1444, 1478, 5]"]
+  175["Sweep Extrusion<br>[1444, 1478, 5]"]
+  176["Sweep Extrusion<br>[1444, 1478, 5]"]
+  177["Sweep Extrusion<br>[1444, 1478, 5]"]
+  178["Plane<br>[1632, 1649, 5]"]
+  186["Sweep Revolve<br>[1979, 1996, 5]"]
   187[Wall]
   188[Wall]
   189[Wall]
@@ -332,8 +332,8 @@ flowchart LR
   191["SweepEdge Adjacent"]
   192["SweepEdge Adjacent"]
   193["SweepEdge Adjacent"]
-  194["Plane<br>[2084, 2101, 4]"]
-  202["Sweep Revolve<br>[2448, 2467, 4]"]
+  194["Plane<br>[2082, 2099, 5]"]
+  202["Sweep Revolve<br>[2446, 2463, 5]"]
   203[Wall]
   204[Wall]
   205[Wall]
@@ -342,8 +342,8 @@ flowchart LR
   208["SweepEdge Adjacent"]
   209["SweepEdge Adjacent"]
   210["SweepEdge Adjacent"]
-  211["Plane<br>[2922, 2945, 4]"]
-  219["Sweep Extrusion<br>[3867, 3913, 4]"]
+  211["Plane<br>[2918, 2941, 5]"]
+  219["Sweep Extrusion<br>[3863, 3909, 5]"]
   220[Wall]
   221[Wall]
   222[Wall]
@@ -358,8 +358,8 @@ flowchart LR
   231["SweepEdge Adjacent"]
   232["SweepEdge Opposite"]
   233["SweepEdge Adjacent"]
-  234["Plane<br>[2922, 2945, 4]"]
-  242["Sweep Extrusion<br>[3867, 3913, 4]"]
+  234["Plane<br>[2918, 2941, 5]"]
+  242["Sweep Extrusion<br>[3863, 3909, 5]"]
   243[Wall]
   244[Wall]
   245[Wall]
@@ -374,8 +374,8 @@ flowchart LR
   254["SweepEdge Adjacent"]
   255["SweepEdge Opposite"]
   256["SweepEdge Adjacent"]
-  257["Plane<br>[4324, 4341, 4]"]
-  284["Sweep Revolve<br>[5634, 5653, 4]"]
+  257["Plane<br>[4320, 4337, 5]"]
+  284["Sweep Revolve<br>[5630, 5647, 5]"]
   285[Wall]
   286[Wall]
   287[Wall]
@@ -424,8 +424,8 @@ flowchart LR
   330["SweepEdge Adjacent"]
   331["SweepEdge Adjacent"]
   332["SweepEdge Adjacent"]
-  333["Plane<br>[706, 732, 7]"]
-  345["Sweep Revolve<br>[1182, 1201, 7]"]
+  333["Plane<br>[706, 732, 8]"]
+  345["Sweep Revolve<br>[1182, 1199, 8]"]
   346[Wall]
   347[Wall]
   348[Wall]
@@ -444,8 +444,8 @@ flowchart LR
   361["SweepEdge Adjacent"]
   362["SweepEdge Adjacent"]
   363["SweepEdge Adjacent"]
-  364["Plane<br>[484, 501, 6]"]
-  384["Sweep Revolve<br>[2243, 2295, 6]"]
+  364["Plane<br>[484, 501, 7]"]
+  384["Sweep Revolve<br>[2243, 2293, 7]"]
   385[Wall]
   386[Wall]
   387[Wall]
@@ -499,8 +499,8 @@ flowchart LR
   435["SweepEdge Adjacent"]
   436["SweepEdge Opposite"]
   437["SweepEdge Adjacent"]
-  438["Plane<br>[460, 477, 8]"]
-  455["Sweep Revolve<br>[1486, 1517, 8]"]
+  438["Plane<br>[460, 477, 9]"]
+  455["Sweep Revolve<br>[1486, 1515, 9]"]
   456[Wall]
   457[Wall]
   458[Wall]
@@ -529,17 +529,17 @@ flowchart LR
   481["SweepEdge Adjacent"]
   482["SweepEdge Adjacent"]
   483["SweepEdge Adjacent"]
-  484["StartSketchOnFace<br>[770, 797, 5]"]
-  485["StartSketchOnFace<br>[947, 978, 5]"]
-  486["StartSketchOnFace<br>[1385, 1414, 5]"]
-  487["StartSketchOnFace<br>[1524, 1558, 5]"]
-  488["StartSketchOnFace<br>[1709, 1742, 5]"]
-  489["StartSketchOnFace<br>[2009, 2038, 5]"]
-  490["StartSketchOnFace<br>[2338, 2367, 5]"]
-  491["StartSketchOnFace<br>[2821, 2854, 5]"]
-  492["StartSketchOnFace<br>[603, 632, 4]"]
-  493["StartSketchOnFace<br>[865, 899, 4]"]
-  494["StartSketchOnFace<br>[1202, 1231, 4]"]
+  484["StartSketchOnFace<br>[770, 797, 6]"]
+  485["StartSketchOnFace<br>[947, 978, 6]"]
+  486["StartSketchOnFace<br>[1385, 1414, 6]"]
+  487["StartSketchOnFace<br>[1524, 1558, 6]"]
+  488["StartSketchOnFace<br>[1709, 1742, 6]"]
+  489["StartSketchOnFace<br>[2009, 2038, 6]"]
+  490["StartSketchOnFace<br>[2338, 2367, 6]"]
+  491["StartSketchOnFace<br>[2821, 2854, 6]"]
+  492["StartSketchOnFace<br>[603, 632, 5]"]
+  493["StartSketchOnFace<br>[865, 899, 5]"]
+  494["StartSketchOnFace<br>[1202, 1231, 5]"]
   1 --- 2
   2 --- 3
   2 ---- 5

rust/kcl-lib/tests/kcl_samples/car-wheel-assembly/program_memory.snap

@@ -5,7 +5,7 @@ description: Variables in memory after executing car-wheel-assembly.kcl
 {
   "brakeCaliper": {
     "type": "Module",
-    "value": 6
+    "value": 7
   },
   "c1": {
     "type": "TagIdentifier",
@@ -14,15 +14,15 @@ description: Variables in memory after executing car-wheel-assembly.kcl
   },
   "carRotor": {
     "type": "Module",
-    "value": 5
+    "value": 6
   },
   "carTire": {
     "type": "Module",
-    "value": 8
+    "value": 9
   },
   "carWheel": {
     "type": "Module",
-    "value": 4
+    "value": 5
   },
   "lugCount": {
     "type": "Number",
@@ -39,6 +39,6 @@ description: Variables in memory after executing car-wheel-assembly.kcl
   },
   "lugNut": {
     "type": "Module",
-    "value": 7
+    "value": 8
   }
 }

rust/kcl-lib/tests/kcl_samples/french-press/artifact_graph_flowchart.snap.md

@@ -10,118 +10,118 @@ flowchart LR
     8[Solid2d]
   end
   subgraph path18 [Path]
-    18["Path<br>[984, 1028, 0]"]
-    19["Segment<br>[1034, 1053, 0]"]
-    20["Segment<br>[1059, 1093, 0]"]
-    21["Segment<br>[1099, 1183, 0]"]
-    22["Segment<br>[1189, 1241, 0]"]
-    23["Segment<br>[1247, 1331, 0]"]
-    24["Segment<br>[1337, 1389, 0]"]
-    25["Segment<br>[1395, 1477, 0]"]
-    26["Segment<br>[1483, 1523, 0]"]
-    27["Segment<br>[1529, 1548, 0]"]
-    28["Segment<br>[1554, 1607, 0]"]
-    29["Segment<br>[1613, 1695, 0]"]
-    30["Segment<br>[1701, 1791, 0]"]
-    31["Segment<br>[1797, 1881, 0]"]
-    32["Segment<br>[1887, 1977, 0]"]
-    33["Segment<br>[1983, 2067, 0]"]
-    34["Segment<br>[2073, 2129, 0]"]
-    35["Segment<br>[2135, 2142, 0]"]
+    18["Path<br>[982, 1026, 0]"]
+    19["Segment<br>[1032, 1051, 0]"]
+    20["Segment<br>[1057, 1091, 0]"]
+    21["Segment<br>[1097, 1181, 0]"]
+    22["Segment<br>[1187, 1239, 0]"]
+    23["Segment<br>[1245, 1329, 0]"]
+    24["Segment<br>[1335, 1387, 0]"]
+    25["Segment<br>[1393, 1475, 0]"]
+    26["Segment<br>[1481, 1521, 0]"]
+    27["Segment<br>[1527, 1546, 0]"]
+    28["Segment<br>[1552, 1605, 0]"]
+    29["Segment<br>[1611, 1693, 0]"]
+    30["Segment<br>[1699, 1789, 0]"]
+    31["Segment<br>[1795, 1879, 0]"]
+    32["Segment<br>[1885, 1975, 0]"]
+    33["Segment<br>[1981, 2065, 0]"]
+    34["Segment<br>[2071, 2127, 0]"]
+    35["Segment<br>[2133, 2140, 0]"]
     36[Solid2d]
   end
   subgraph path89 [Path]
-    89["Path<br>[2409, 2468, 0]"]
-    90["Segment<br>[2409, 2468, 0]"]
+    89["Path<br>[2407, 2466, 0]"]
+    90["Segment<br>[2407, 2466, 0]"]
     91[Solid2d]
   end
   subgraph path98 [Path]
-    98["Path<br>[2569, 2599, 0]"]
-    99["Segment<br>[2605, 2624, 0]"]
-    100["Segment<br>[2630, 2713, 0]"]
-    101["Segment<br>[2719, 2775, 0]"]
-    102["Segment<br>[2781, 2788, 0]"]
+    98["Path<br>[2567, 2597, 0]"]
+    99["Segment<br>[2603, 2622, 0]"]
+    100["Segment<br>[2628, 2711, 0]"]
+    101["Segment<br>[2717, 2773, 0]"]
+    102["Segment<br>[2779, 2786, 0]"]
     103[Solid2d]
   end
   subgraph path117 [Path]
-    117["Path<br>[3026, 3057, 0]"]
-    118["Segment<br>[3063, 3108, 0]"]
-    119["Segment<br>[3114, 3204, 0]"]
-    120["Segment<br>[3210, 3256, 0]"]
-    121["Segment<br>[3262, 3315, 0]"]
-    122["Segment<br>[3321, 3346, 0]"]
-    123["Segment<br>[3352, 3408, 0]"]
-    124["Segment<br>[3414, 3421, 0]"]
+    117["Path<br>[3024, 3055, 0]"]
+    118["Segment<br>[3061, 3106, 0]"]
+    119["Segment<br>[3112, 3202, 0]"]
+    120["Segment<br>[3208, 3254, 0]"]
+    121["Segment<br>[3260, 3313, 0]"]
+    122["Segment<br>[3319, 3344, 0]"]
+    123["Segment<br>[3350, 3406, 0]"]
+    124["Segment<br>[3412, 3419, 0]"]
     125[Solid2d]
   end
   subgraph path140 [Path]
-    140["Path<br>[3503, 3530, 0]"]
-    141["Segment<br>[3536, 3556, 0]"]
-    142["Segment<br>[3562, 3605, 0]"]
-    143["Segment<br>[3611, 3629, 0]"]
-    144["Segment<br>[3635, 3655, 0]"]
-    145["Segment<br>[3661, 3681, 0]"]
-    146["Segment<br>[3687, 3735, 0]"]
-    147["Segment<br>[3741, 3797, 0]"]
-    148["Segment<br>[3803, 3810, 0]"]
+    140["Path<br>[3499, 3526, 0]"]
+    141["Segment<br>[3532, 3552, 0]"]
+    142["Segment<br>[3558, 3601, 0]"]
+    143["Segment<br>[3607, 3625, 0]"]
+    144["Segment<br>[3631, 3651, 0]"]
+    145["Segment<br>[3657, 3677, 0]"]
+    146["Segment<br>[3683, 3731, 0]"]
+    147["Segment<br>[3737, 3793, 0]"]
+    148["Segment<br>[3799, 3806, 0]"]
     149[Solid2d]
   end
   subgraph path166 [Path]
-    166["Path<br>[3916, 3975, 0]"]
-    167["Segment<br>[3916, 3975, 0]"]
+    166["Path<br>[3910, 3969, 0]"]
+    167["Segment<br>[3910, 3969, 0]"]
     168[Solid2d]
   end
   subgraph path169 [Path]
-    169["Path<br>[3986, 4023, 0]"]
-    170["Segment<br>[3986, 4023, 0]"]
+    169["Path<br>[3980, 4017, 0]"]
+    170["Segment<br>[3980, 4017, 0]"]
     171[Solid2d]
   end
   subgraph path178 [Path]
-    178["Path<br>[4165, 4203, 0]"]
-    179["Segment<br>[4165, 4203, 0]"]
+    178["Path<br>[4159, 4197, 0]"]
+    179["Segment<br>[4159, 4197, 0]"]
     180[Solid2d]
   end
   subgraph path192 [Path]
-    192["Path<br>[4476, 4514, 0]"]
-    193["Segment<br>[4476, 4514, 0]"]
+    192["Path<br>[4470, 4508, 0]"]
+    193["Segment<br>[4470, 4508, 0]"]
     194[Solid2d]
   end
   subgraph path203 [Path]
-    203["Path<br>[4766, 4818, 0]"]
-    204["Segment<br>[4766, 4818, 0]"]
+    203["Path<br>[4760, 4812, 0]"]
+    204["Segment<br>[4760, 4812, 0]"]
     205[Solid2d]
   end
   subgraph path213 [Path]
-    213["Path<br>[5065, 5109, 0]"]
-    214["Segment<br>[5115, 5155, 0]"]
-    215["Segment<br>[5161, 5180, 0]"]
-    216["Segment<br>[5186, 5205, 0]"]
-    217["Segment<br>[5211, 5230, 0]"]
-    218["Segment<br>[5236, 5261, 0]"]
-    219["Segment<br>[5267, 5407, 0]"]
-    220["Segment<br>[5413, 5469, 0]"]
-    221["Segment<br>[5475, 5482, 0]"]
+    213["Path<br>[5059, 5103, 0]"]
+    214["Segment<br>[5109, 5149, 0]"]
+    215["Segment<br>[5155, 5174, 0]"]
+    216["Segment<br>[5180, 5199, 0]"]
+    217["Segment<br>[5205, 5224, 0]"]
+    218["Segment<br>[5230, 5255, 0]"]
+    219["Segment<br>[5261, 5401, 0]"]
+    220["Segment<br>[5407, 5463, 0]"]
+    221["Segment<br>[5469, 5476, 0]"]
     222[Solid2d]
   end
   subgraph path239 [Path]
-    239["Path<br>[5614, 5643, 0]"]
-    240["Segment<br>[5649, 5670, 0]"]
-    241["Segment<br>[5676, 5707, 0]"]
-    242["Segment<br>[5713, 5744, 0]"]
-    243["Segment<br>[5750, 5782, 0]"]
-    244["Segment<br>[5788, 5810, 0]"]
-    245["Segment<br>[5816, 5837, 0]"]
-    246["Segment<br>[5843, 5868, 0]"]
-    247["Segment<br>[5874, 5905, 0]"]
-    248["Segment<br>[5911, 5943, 0]"]
-    249["Segment<br>[5949, 5981, 0]"]
-    250["Segment<br>[5987, 6008, 0]"]
-    251["Segment<br>[6014, 6070, 0]"]
-    252["Segment<br>[6076, 6083, 0]"]
+    239["Path<br>[5606, 5635, 0]"]
+    240["Segment<br>[5641, 5662, 0]"]
+    241["Segment<br>[5668, 5699, 0]"]
+    242["Segment<br>[5705, 5736, 0]"]
+    243["Segment<br>[5742, 5774, 0]"]
+    244["Segment<br>[5780, 5802, 0]"]
+    245["Segment<br>[5808, 5829, 0]"]
+    246["Segment<br>[5835, 5860, 0]"]
+    247["Segment<br>[5866, 5897, 0]"]
+    248["Segment<br>[5903, 5935, 0]"]
+    249["Segment<br>[5941, 5973, 0]"]
+    250["Segment<br>[5979, 6000, 0]"]
+    251["Segment<br>[6006, 6062, 0]"]
+    252["Segment<br>[6068, 6075, 0]"]
     253[Solid2d]
   end
   1["Plane<br>[241, 258, 0]"]
-  9["Sweep Revolve<br>[674, 706, 0]"]
+  9["Sweep Revolve<br>[674, 704, 0]"]
   10[Wall]
   11[Wall]
   12[Wall]
@@ -129,8 +129,8 @@ flowchart LR
   14["SweepEdge Adjacent"]
   15["SweepEdge Adjacent"]
   16["SweepEdge Adjacent"]
-  17["Plane<br>[955, 978, 0]"]
-  37["Sweep Extrusion<br>[2148, 2170, 0]"]
+  17["Plane<br>[953, 976, 0]"]
+  37["Sweep Extrusion<br>[2146, 2168, 0]"]
   38[Wall]
   39[Wall]
   40[Wall]
@@ -181,14 +181,14 @@ flowchart LR
   85["SweepEdge Adjacent"]
   86["SweepEdge Opposite"]
   87["SweepEdge Adjacent"]
-  88["Plane<br>[2375, 2402, 0]"]
-  92["Sweep Extrusion<br>[2483, 2517, 0]"]
+  88["Plane<br>[2373, 2400, 0]"]
+  92["Sweep Extrusion<br>[2481, 2515, 0]"]
   93[Wall]
   94["Cap Start"]
   95["Cap End"]
   96["SweepEdge Opposite"]
   97["SweepEdge Adjacent"]
-  104["Sweep Extrusion<br>[2937, 2972, 0]"]
+  104["Sweep Extrusion<br>[2935, 2970, 0]"]
   105[Wall]
   106[Wall]
   107[Wall]
@@ -198,10 +198,10 @@ flowchart LR
   111["SweepEdge Adjacent"]
   112["SweepEdge Opposite"]
   113["SweepEdge Adjacent"]
-  114["Sweep Extrusion<br>[2937, 2972, 0]"]
-  115["Sweep Extrusion<br>[2937, 2972, 0]"]
-  116["Plane<br>[3003, 3020, 0]"]
-  126["Sweep Revolve<br>[3427, 3446, 0]"]
+  114["Sweep Extrusion<br>[2935, 2970, 0]"]
+  115["Sweep Extrusion<br>[2935, 2970, 0]"]
+  116["Plane<br>[3001, 3018, 0]"]
+  126["Sweep Revolve<br>[3425, 3442, 0]"]
   127[Wall]
   128[Wall]
   129[Wall]
@@ -214,8 +214,8 @@ flowchart LR
   136["SweepEdge Adjacent"]
   137["SweepEdge Adjacent"]
   138["SweepEdge Adjacent"]
-  139["Plane<br>[3480, 3497, 0]"]
-  150["Sweep Revolve<br>[3816, 3835, 0]"]
+  139["Plane<br>[3476, 3493, 0]"]
+  150["Sweep Revolve<br>[3812, 3829, 0]"]
   151[Wall]
   152[Wall]
   153[Wall]
@@ -230,40 +230,40 @@ flowchart LR
   162["SweepEdge Adjacent"]
   163["SweepEdge Adjacent"]
   164["SweepEdge Adjacent"]
-  165["Plane<br>[3879, 3909, 0]"]
-  172["Sweep Extrusion<br>[4042, 4076, 0]"]
+  165["Plane<br>[3873, 3903, 0]"]
+  172["Sweep Extrusion<br>[4036, 4070, 0]"]
   173[Wall]
   174["Cap Start"]
   175["Cap End"]
   176["SweepEdge Opposite"]
   177["SweepEdge Adjacent"]
-  181["Sweep Extrusion<br>[4352, 4387, 0]"]
+  181["Sweep Extrusion<br>[4346, 4381, 0]"]
   182[Wall]
   183["SweepEdge Opposite"]
   184["SweepEdge Adjacent"]
-  185["Sweep Extrusion<br>[4352, 4387, 0]"]
-  186["Sweep Extrusion<br>[4352, 4387, 0]"]
-  187["Sweep Extrusion<br>[4352, 4387, 0]"]
-  188["Sweep Extrusion<br>[4352, 4387, 0]"]
-  189["Sweep Extrusion<br>[4352, 4387, 0]"]
-  190["Sweep Extrusion<br>[4352, 4387, 0]"]
-  191["Sweep Extrusion<br>[4352, 4387, 0]"]
-  195["Sweep Extrusion<br>[4663, 4698, 0]"]
+  185["Sweep Extrusion<br>[4346, 4381, 0]"]
+  186["Sweep Extrusion<br>[4346, 4381, 0]"]
+  187["Sweep Extrusion<br>[4346, 4381, 0]"]
+  188["Sweep Extrusion<br>[4346, 4381, 0]"]
+  189["Sweep Extrusion<br>[4346, 4381, 0]"]
+  190["Sweep Extrusion<br>[4346, 4381, 0]"]
+  191["Sweep Extrusion<br>[4346, 4381, 0]"]
+  195["Sweep Extrusion<br>[4657, 4692, 0]"]
   196[Wall]
   197["SweepEdge Opposite"]
   198["SweepEdge Adjacent"]
-  199["Sweep Extrusion<br>[4663, 4698, 0]"]
-  200["Sweep Extrusion<br>[4663, 4698, 0]"]
-  201["Sweep Extrusion<br>[4663, 4698, 0]"]
-  202["Plane<br>[4743, 4760, 0]"]
-  206["Sweep Extrusion<br>[4914, 4955, 0]"]
+  199["Sweep Extrusion<br>[4657, 4692, 0]"]
+  200["Sweep Extrusion<br>[4657, 4692, 0]"]
+  201["Sweep Extrusion<br>[4657, 4692, 0]"]
+  202["Plane<br>[4737, 4754, 0]"]
+  206["Sweep Extrusion<br>[4908, 4949, 0]"]
   207[Wall]
   208["Cap Start"]
   209["Cap End"]
   210["SweepEdge Opposite"]
   211["SweepEdge Adjacent"]
-  212["Plane<br>[5042, 5059, 0]"]
-  223["Sweep Revolve<br>[5488, 5507, 0]"]
+  212["Plane<br>[5036, 5053, 0]"]
+  223["Sweep Revolve<br>[5482, 5499, 0]"]
   224[Wall]
   225[Wall]
   226[Wall]
@@ -278,8 +278,8 @@ flowchart LR
   235["SweepEdge Adjacent"]
   236["SweepEdge Adjacent"]
   237["SweepEdge Adjacent"]
-  238["Plane<br>[5562, 5607, 0]"]
-  254["Sweep Extrusion<br>[6097, 6142, 0]"]
+  238["Plane<br>[5554, 5599, 0]"]
+  254["Sweep Extrusion<br>[6089, 6134, 0]"]
   255[Wall]
   256[Wall]
   257[Wall]
@@ -318,12 +318,12 @@ flowchart LR
   290["SweepEdge Adjacent"]
   291["SweepEdge Opposite"]
   292["SweepEdge Adjacent"]
-  293["StartSketchOnPlane<br>[2361, 2403, 0]"]
-  294["StartSketchOnFace<br>[2531, 2563, 0]"]
-  295["StartSketchOnPlane<br>[3865, 3910, 0]"]
-  296["StartSketchOnFace<br>[4127, 4159, 0]"]
-  297["StartSketchOnFace<br>[4438, 4470, 0]"]
-  298["StartSketchOnPlane<br>[5548, 5608, 0]"]
+  293["StartSketchOnPlane<br>[2359, 2401, 0]"]
+  294["StartSketchOnFace<br>[2529, 2561, 0]"]
+  295["StartSketchOnPlane<br>[3859, 3904, 0]"]
+  296["StartSketchOnFace<br>[4121, 4153, 0]"]
+  297["StartSketchOnFace<br>[4432, 4464, 0]"]
+  298["StartSketchOnPlane<br>[5540, 5600, 0]"]
   1 --- 2
   2 --- 3
   2 --- 4